| Age | Commit message (Collapse) | Author |
|---|
|
|
|
This reverts commit bd4df530095ee343778a59120a9e641c01010b0f.
I did not properly untangle the opening / dirlist update of each other.
This interferes with the imap worker, hence the revert
|
|
|
|
Compare self address in lowercase, to avoid self-replying when people
put in uppercase versions of the mail.
Reported-By: helby on Freenode
|
|
|
|
|
|
|
|
Actions such as read / unread or the addition of new messages do change
the read/unread/recent count. Hence we request an update from the workers.
Workers going over the network should probably cache the information and invalidate
it only if necessary
|
|
Currently the dirlist ignores the counts provided by the dirInfo.
However some of the workers can actually provide accurate counts much quicker
than if we count the flags.
Eventually we will also want to enable displaying counts for background folders,
where the brute force counting won't work as none of the headers are fetched yet.
This commit models it in an opt-in manner, if the flag isn't set then we still
count the messages manually.
|
|
Previously, sending a DirectoryInfo assumed that a directory change
happened. However we don't want that if we only want to update the
unread message count.
|
|
The idle restart code is at the end of handleMessage in the worker.
However if an unsupported msg comes in, we returned early, skipping the re-init.
That lead to a crash due to double closing idleStop in the next iteration.
|
|
Opening a notmuch DB gives you a snapshot of the stage at that specific time.
Prior to this, we only reopened the DB upon writing.
However, if say a mail sync program like offlineimap is fetching new mail,
we would never pick it up.
This commit caches a db for a while, so that we don't generate too much overhead
and does a reconnect cycle after that.
I hardcoded a value as I don't think that having an option would be beneficial.
Any write operation (meaning reading mail) anyhow flushes the DB by necessity.
(we need to close to commit tag changes, which changing the read state is)
|
|
If the message doesn't contain ':', we don't properly discard the
message, so we end up slicing it like msg[:-1].
This can be reproduced if one runs 'aerc foo', as the server receives
'foo' as the message.
'aerc foo' still doesn't do anything very user friendly, but at least it
doesn't panic horribly.
While at it, do the 'got message' log at the very beginning, so that the
user can see what message the server got before reporting the command as
invalid.
Signed-off-by: Daniel Martí <mvdan@mvdan.cc>
|
|
|
|
When the list of directories is empty trying to navigate in the
directory list did previously lead to a crash. With this change we
instead return early before trying to change the directory.
Example backtrace:
> panic: runtime error: index out of range [-1]
>
> goroutine 1 [running]:
> git.sr.ht/~sircmpwn/aerc/widgets.(*DirectoryList).NextPrev(0xc000160680, 0xffffffffffffffff)
> source/aerc/widgets/dirlist.go:285 +0xd4
> git.sr.ht/~sircmpwn/aerc/commands/account.NextPrevFolder.Execute(0xc000191040, 0xc00025c210, 0x1, 0x1, 0x0, 0xc00016f420)
> source/aerc/commands/account/next-folder.go:44 +0xe0
> git.sr.ht/~sircmpwn/aerc/commands.(*Commands).ExecuteCommand(0xc0000101a8, 0xc000191040, 0xc00025c210, 0x1, 0x1, 0xc000020070, 0xb46d01)
> source/aerc/commands/commands.go:66 +0xa7
> main.execCommand(0xc000191040, 0xc0001ca190, 0xc00025c210, 0x1, 0x1, 0xc00025c210, 0xc0003fb080)
> source/aerc/aerc.go:60 +0xc7
> main.main.func3(0xc00025c210, 0x1, 0x1, 0x1, 0x1)
> source/aerc/aerc.go:162 +0x57
> git.sr.ht/~sircmpwn/aerc/widgets.(*Aerc).BeginExCommand.func1(0xc000201db0, 0xb)
> source/aerc/widgets/aerc.go:382 +0x83
> git.sr.ht/~sircmpwn/aerc/widgets.(*ExLine).Event(0xc0003be100, 0xb475a0, 0xc00023cba0, 0xc00023cba0)
> source/aerc/widgets/exline.go:79 +0x131
> git.sr.ht/~sircmpwn/aerc/widgets.(*Aerc).Event(0xc000191040, 0xb475a0, 0xc00023cba0, 0x99ee01)
> source/aerc/widgets/aerc.go:202 +0x4c1
> git.sr.ht/~sircmpwn/aerc/widgets.(*Aerc).simulate(0xc000191040, 0xc000036f00, 0xd, 0x10)
> source/aerc/widgets/aerc.go:195 +0x8d
> git.sr.ht/~sircmpwn/aerc/widgets.(*Aerc).Event(0xc000191040, 0xb475a0, 0xc00023c9c0, 0x9c5a60)
> source/aerc/widgets/aerc.go:218 +0x3e8
> git.sr.ht/~sircmpwn/aerc/lib/ui.(*UI).Tick(0xc0001ca190, 0xa99d00)
> source/aerc/lib/ui/ui.go:92 +0x190
> main.main()
> source/aerc/aerc.go:192 +0x5f2
|
|
|
|
|
|
|
|
The docs of strings.Compare state:
> Compare is included only for symmetry with package bytes. It is usually
> clearer and always faster to use the built-in string comparison operators
> ==, <, >, and so on.
So let's do that.
|
|
The go compiler can't help much with untyped int constants.
Even though the only valid constants are 0-3 it will happily accept 4 as input.
Let's let the go compiler worry about correctness here. This also allows people
not very familiar with the code to use it properly via auto completion.
|
|
We need to emit the changed msgInfo whenever we modify the state
|
|
+ Adds parsing of contextual ui sections to aerc config.
+ Add GetUiConfig method for AercConfig that is used to get the
specialized UI config.
+ Add UiConfig method to AccountView to get specialized UI Config.
+ Modifies Aerc codebase to use specialized UIConfig instead.
+ Adds documentation for Contextual UI Configuration
|
|
Before, while the docs stated that template-dirs was a colon-separated
list, a delimiter was not specified in the struct tag, so it was falling
back to the default for the ini library (a comma). Also added a note to
the docs to clarify that templates are configured in the [templates]
section.
|
|
|
|
The functionality was broken since the decoding changes.
This commit also simplifies the code (in my view) to make the application logic
easier to follow.
The docs are updated accordingly (the feature was poorly documented).
As far as I am aware there should be no breaking changes (and is certainly
still in the spec of the prior documentation)
|
|
|
|
Doing that breaks `git am` as it expected the encoded variant.
Same is probably true for any sort of signature validation (gpg / dkim)
|
|
The relevant change was merged upstream, and thus allows us to clean up
unneeded forks.
|
|
|
|
|
|
When the list of completions from the external command doesn't have
associated contact names, the email address we attempt to parse was
being terminated with a newline. Now, we strip the trailing newline if
present.
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
Previously the workers returned a mixture of decoded / encoded parts.
This lead to a whole bunch of issues.
This commit changes the msgviewer and the commands to assume parts to already
be decoded
|
|
|
|
|
|
|
|
|
|
This document used to specify some constraints on the receipient
address, but this has since been corrected in aerc.
|
|
Before, pressing <Enter> when completions were visible would execute the
selected completion. As soon as completions were provided, the first
item would be selected. This could cause issues e.g. when changing
folders:
:cf <Enter>
Previously, this would have selected the first folder in the list. Now,
since <Tab>, <C-n>, etc have not been pressed to select the first
completion, the command above simply executes `:cf `.
To accomplish this, a "no-op completion" has been added at index -1.
|
|
|
|
When addresses contain special characters, net/mail MIME-encodes them
to a valid RFC 5322 address for use in headers. However, these are not
pleasant for human consumption, so we decode them for use in the
completion list. Aerc properly encodes addresses when the message is
sent.
This patch also removes surrounding white space from contact names, if
present.
|
|
In order to accommodate for that, the headerlayout needed to be rewritten
to pass the filter criteria back to the msgviewer, instead of just using
the normal headers.
|
