diff options
Diffstat (limited to 'vendor/github.com/mattn/go-sqlite3/sqlite3-binding.c')
| -rw-r--r-- | vendor/github.com/mattn/go-sqlite3/sqlite3-binding.c | 30554 |
1 files changed, 20685 insertions, 9869 deletions
diff --git a/vendor/github.com/mattn/go-sqlite3/sqlite3-binding.c b/vendor/github.com/mattn/go-sqlite3/sqlite3-binding.c index 825e7d8..f077152 100644 --- a/vendor/github.com/mattn/go-sqlite3/sqlite3-binding.c +++ b/vendor/github.com/mattn/go-sqlite3/sqlite3-binding.c @@ -1,8 +1,7 @@ #ifndef USE_LIBSQLITE3 -#define SQLITE_DISABLE_INTRINSIC 1 /****************************************************************************** ** This file is an amalgamation of many separate C source files from SQLite -** version 3.17.0. By combining all the individual C code files into this +** version 3.24.0. By combining all the individual C code files into this ** single large file, the entire code can be compiled as a single translation ** unit. This allows many compilers to do optimizations that would not be ** possible if the files were compiled separately. Performance improvements @@ -24,6 +23,764 @@ #ifndef SQLITE_PRIVATE # define SQLITE_PRIVATE static #endif +/************** Begin file ctime.c *******************************************/ +/* +** 2010 February 23 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file implements routines used to report what compile-time options +** SQLite was built with. +*/ + +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS + +/* +** Include the configuration header output by 'configure' if we're using the +** autoconf-based build +*/ +#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H) +#include "config.h" +#define SQLITECONFIG_H 1 +#endif + +/* These macros are provided to "stringify" the value of the define +** for those options in which the value is meaningful. */ +#define CTIMEOPT_VAL_(opt) #opt +#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt) + +/* +** An array of names of all compile-time options. This array should +** be sorted A-Z. +** +** This array looks large, but in a typical installation actually uses +** only a handful of compile-time options, so most times this array is usually +** rather short and uses little memory space. +*/ +static const char * const sqlite3azCompileOpt[] = { + +/* +** BEGIN CODE GENERATED BY tool/mkctime.tcl +*/ +#if SQLITE_32BIT_ROWID + "32BIT_ROWID", +#endif +#if SQLITE_4_BYTE_ALIGNED_MALLOC + "4_BYTE_ALIGNED_MALLOC", +#endif +#if SQLITE_64BIT_STATS + "64BIT_STATS", +#endif +#if SQLITE_ALLOW_COVERING_INDEX_SCAN + "ALLOW_COVERING_INDEX_SCAN", +#endif +#if SQLITE_ALLOW_URI_AUTHORITY + "ALLOW_URI_AUTHORITY", +#endif +#ifdef SQLITE_BITMASK_TYPE + "BITMASK_TYPE=" CTIMEOPT_VAL(SQLITE_BITMASK_TYPE), +#endif +#if SQLITE_BUG_COMPATIBLE_20160819 + "BUG_COMPATIBLE_20160819", +#endif +#if SQLITE_CASE_SENSITIVE_LIKE + "CASE_SENSITIVE_LIKE", +#endif +#if SQLITE_CHECK_PAGES + "CHECK_PAGES", +#endif +#if defined(__clang__) && defined(__clang_major__) + "COMPILER=clang-" CTIMEOPT_VAL(__clang_major__) "." + CTIMEOPT_VAL(__clang_minor__) "." + CTIMEOPT_VAL(__clang_patchlevel__), +#elif defined(_MSC_VER) + "COMPILER=msvc-" CTIMEOPT_VAL(_MSC_VER), +#elif defined(__GNUC__) && defined(__VERSION__) + "COMPILER=gcc-" __VERSION__, +#endif +#if SQLITE_COVERAGE_TEST + "COVERAGE_TEST", +#endif +#if SQLITE_DEBUG + "DEBUG", +#endif +#if SQLITE_DEFAULT_AUTOMATIC_INDEX + "DEFAULT_AUTOMATIC_INDEX", +#endif +#if SQLITE_DEFAULT_AUTOVACUUM + "DEFAULT_AUTOVACUUM", +#endif +#ifdef SQLITE_DEFAULT_CACHE_SIZE + "DEFAULT_CACHE_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_CACHE_SIZE), +#endif +#if SQLITE_DEFAULT_CKPTFULLFSYNC + "DEFAULT_CKPTFULLFSYNC", +#endif +#ifdef SQLITE_DEFAULT_FILE_FORMAT + "DEFAULT_FILE_FORMAT=" CTIMEOPT_VAL(SQLITE_DEFAULT_FILE_FORMAT), +#endif +#ifdef SQLITE_DEFAULT_FILE_PERMISSIONS + "DEFAULT_FILE_PERMISSIONS=" CTIMEOPT_VAL(SQLITE_DEFAULT_FILE_PERMISSIONS), +#endif +#if SQLITE_DEFAULT_FOREIGN_KEYS + "DEFAULT_FOREIGN_KEYS", +#endif +#ifdef SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT + "DEFAULT_JOURNAL_SIZE_LIMIT=" CTIMEOPT_VAL(SQLITE_DEFAULT_JOURNAL_SIZE_LIMIT), +#endif +#ifdef SQLITE_DEFAULT_LOCKING_MODE + "DEFAULT_LOCKING_MODE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOCKING_MODE), +#endif +#ifdef SQLITE_DEFAULT_LOOKASIDE + "DEFAULT_LOOKASIDE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOOKASIDE), +#endif +#if SQLITE_DEFAULT_MEMSTATUS + "DEFAULT_MEMSTATUS", +#endif +#ifdef SQLITE_DEFAULT_MMAP_SIZE + "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE), +#endif +#ifdef SQLITE_DEFAULT_PAGE_SIZE + "DEFAULT_PAGE_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_PAGE_SIZE), +#endif +#ifdef SQLITE_DEFAULT_PCACHE_INITSZ + "DEFAULT_PCACHE_INITSZ=" CTIMEOPT_VAL(SQLITE_DEFAULT_PCACHE_INITSZ), +#endif +#ifdef SQLITE_DEFAULT_PROXYDIR_PERMISSIONS + "DEFAULT_PROXYDIR_PERMISSIONS=" CTIMEOPT_VAL(SQLITE_DEFAULT_PROXYDIR_PERMISSIONS), +#endif +#if SQLITE_DEFAULT_RECURSIVE_TRIGGERS + "DEFAULT_RECURSIVE_TRIGGERS", +#endif +#ifdef SQLITE_DEFAULT_ROWEST + "DEFAULT_ROWEST=" CTIMEOPT_VAL(SQLITE_DEFAULT_ROWEST), +#endif +#ifdef SQLITE_DEFAULT_SECTOR_SIZE + "DEFAULT_SECTOR_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_SECTOR_SIZE), +#endif +#ifdef SQLITE_DEFAULT_SYNCHRONOUS + "DEFAULT_SYNCHRONOUS=" CTIMEOPT_VAL(SQLITE_DEFAULT_SYNCHRONOUS), +#endif +#ifdef SQLITE_DEFAULT_WAL_AUTOCHECKPOINT + "DEFAULT_WAL_AUTOCHECKPOINT=" CTIMEOPT_VAL(SQLITE_DEFAULT_WAL_AUTOCHECKPOINT), +#endif +#ifdef SQLITE_DEFAULT_WAL_SYNCHRONOUS + "DEFAULT_WAL_SYNCHRONOUS=" CTIMEOPT_VAL(SQLITE_DEFAULT_WAL_SYNCHRONOUS), +#endif +#ifdef SQLITE_DEFAULT_WORKER_THREADS + "DEFAULT_WORKER_THREADS=" CTIMEOPT_VAL(SQLITE_DEFAULT_WORKER_THREADS), +#endif +#if SQLITE_DIRECT_OVERFLOW_READ + "DIRECT_OVERFLOW_READ", +#endif +#if SQLITE_DISABLE_DIRSYNC + "DISABLE_DIRSYNC", +#endif +#if SQLITE_DISABLE_FTS3_UNICODE + "DISABLE_FTS3_UNICODE", +#endif +#if SQLITE_DISABLE_FTS4_DEFERRED + "DISABLE_FTS4_DEFERRED", +#endif +#if SQLITE_DISABLE_INTRINSIC + "DISABLE_INTRINSIC", +#endif +#if SQLITE_DISABLE_LFS + "DISABLE_LFS", +#endif +#if SQLITE_DISABLE_PAGECACHE_OVERFLOW_STATS + "DISABLE_PAGECACHE_OVERFLOW_STATS", +#endif +#if SQLITE_DISABLE_SKIPAHEAD_DISTINCT + "DISABLE_SKIPAHEAD_DISTINCT", +#endif +#ifdef SQLITE_ENABLE_8_3_NAMES + "ENABLE_8_3_NAMES=" CTIMEOPT_VAL(SQLITE_ENABLE_8_3_NAMES), +#endif +#if SQLITE_ENABLE_API_ARMOR + "ENABLE_API_ARMOR", +#endif +#if SQLITE_ENABLE_ATOMIC_WRITE + "ENABLE_ATOMIC_WRITE", +#endif +#if SQLITE_ENABLE_BATCH_ATOMIC_WRITE + "ENABLE_BATCH_ATOMIC_WRITE", +#endif +#if SQLITE_ENABLE_CEROD + "ENABLE_CEROD=" CTIMEOPT_VAL(SQLITE_ENABLE_CEROD), +#endif +#if SQLITE_ENABLE_COLUMN_METADATA + "ENABLE_COLUMN_METADATA", +#endif +#if SQLITE_ENABLE_COLUMN_USED_MASK + "ENABLE_COLUMN_USED_MASK", +#endif +#if SQLITE_ENABLE_COSTMULT + "ENABLE_COSTMULT", +#endif +#if SQLITE_ENABLE_CURSOR_HINTS + "ENABLE_CURSOR_HINTS", +#endif +#if SQLITE_ENABLE_DBSTAT_VTAB + "ENABLE_DBSTAT_VTAB", +#endif +#if SQLITE_ENABLE_EXPENSIVE_ASSERT + "ENABLE_EXPENSIVE_ASSERT", +#endif +#if SQLITE_ENABLE_FTS1 + "ENABLE_FTS1", +#endif +#if SQLITE_ENABLE_FTS2 + "ENABLE_FTS2", +#endif +#if SQLITE_ENABLE_FTS3 + "ENABLE_FTS3", +#endif +#if SQLITE_ENABLE_FTS3_PARENTHESIS + "ENABLE_FTS3_PARENTHESIS", +#endif +#if SQLITE_ENABLE_FTS3_TOKENIZER + "ENABLE_FTS3_TOKENIZER", +#endif +#if SQLITE_ENABLE_FTS4 + "ENABLE_FTS4", +#endif +#if SQLITE_ENABLE_FTS5 + "ENABLE_FTS5", +#endif +#if SQLITE_ENABLE_HIDDEN_COLUMNS + "ENABLE_HIDDEN_COLUMNS", +#endif +#if SQLITE_ENABLE_ICU + "ENABLE_ICU", +#endif +#if SQLITE_ENABLE_IOTRACE + "ENABLE_IOTRACE", +#endif +#if SQLITE_ENABLE_JSON1 + "ENABLE_JSON1", +#endif +#if SQLITE_ENABLE_LOAD_EXTENSION + "ENABLE_LOAD_EXTENSION", +#endif +#ifdef SQLITE_ENABLE_LOCKING_STYLE + "ENABLE_LOCKING_STYLE=" CTIMEOPT_VAL(SQLITE_ENABLE_LOCKING_STYLE), +#endif +#if SQLITE_ENABLE_MEMORY_MANAGEMENT + "ENABLE_MEMORY_MANAGEMENT", +#endif +#if SQLITE_ENABLE_MEMSYS3 + "ENABLE_MEMSYS3", +#endif +#if SQLITE_ENABLE_MEMSYS5 + "ENABLE_MEMSYS5", +#endif +#if SQLITE_ENABLE_MULTIPLEX + "ENABLE_MULTIPLEX", +#endif +#if SQLITE_ENABLE_NULL_TRIM + "ENABLE_NULL_TRIM", +#endif +#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK + "ENABLE_OVERSIZE_CELL_CHECK", +#endif +#if SQLITE_ENABLE_PREUPDATE_HOOK + "ENABLE_PREUPDATE_HOOK", +#endif +#if SQLITE_ENABLE_QPSG + "ENABLE_QPSG", +#endif +#if SQLITE_ENABLE_RBU + "ENABLE_RBU", +#endif +#if SQLITE_ENABLE_RTREE + "ENABLE_RTREE", +#endif +#if SQLITE_ENABLE_SELECTTRACE + "ENABLE_SELECTTRACE", +#endif +#if SQLITE_ENABLE_SESSION + "ENABLE_SESSION", +#endif +#if SQLITE_ENABLE_SNAPSHOT + "ENABLE_SNAPSHOT", +#endif +#if SQLITE_ENABLE_SORTER_REFERENCES + "ENABLE_SORTER_REFERENCES", +#endif +#if SQLITE_ENABLE_SQLLOG + "ENABLE_SQLLOG", +#endif +#if defined(SQLITE_ENABLE_STAT4) + "ENABLE_STAT4", +#elif defined(SQLITE_ENABLE_STAT3) + "ENABLE_STAT3", +#endif +#if SQLITE_ENABLE_STMTVTAB + "ENABLE_STMTVTAB", +#endif +#if SQLITE_ENABLE_STMT_SCANSTATUS + "ENABLE_STMT_SCANSTATUS", +#endif +#if SQLITE_ENABLE_UNKNOWN_SQL_FUNCTION + "ENABLE_UNKNOWN_SQL_FUNCTION", +#endif +#if SQLITE_ENABLE_UNLOCK_NOTIFY + "ENABLE_UNLOCK_NOTIFY", +#endif +#if SQLITE_ENABLE_UPDATE_DELETE_LIMIT + "ENABLE_UPDATE_DELETE_LIMIT", +#endif +#if SQLITE_ENABLE_URI_00_ERROR + "ENABLE_URI_00_ERROR", +#endif +#if SQLITE_ENABLE_VFSTRACE + "ENABLE_VFSTRACE", +#endif +#if SQLITE_ENABLE_WHERETRACE + "ENABLE_WHERETRACE", +#endif +#if SQLITE_ENABLE_ZIPVFS + "ENABLE_ZIPVFS", +#endif +#if SQLITE_EXPLAIN_ESTIMATED_ROWS + "EXPLAIN_ESTIMATED_ROWS", +#endif +#if SQLITE_EXTRA_IFNULLROW + "EXTRA_IFNULLROW", +#endif +#ifdef SQLITE_EXTRA_INIT + "EXTRA_INIT=" CTIMEOPT_VAL(SQLITE_EXTRA_INIT), +#endif +#ifdef SQLITE_EXTRA_SHUTDOWN + "EXTRA_SHUTDOWN=" CTIMEOPT_VAL(SQLITE_EXTRA_SHUTDOWN), +#endif +#ifdef SQLITE_FTS3_MAX_EXPR_DEPTH + "FTS3_MAX_EXPR_DEPTH=" CTIMEOPT_VAL(SQLITE_FTS3_MAX_EXPR_DEPTH), +#endif +#if SQLITE_FTS5_ENABLE_TEST_MI + "FTS5_ENABLE_TEST_MI", +#endif +#if SQLITE_FTS5_NO_WITHOUT_ROWID + "FTS5_NO_WITHOUT_ROWID", +#endif +#if SQLITE_HAS_CODEC + "HAS_CODEC", +#endif +#if HAVE_ISNAN || SQLITE_HAVE_ISNAN + "HAVE_ISNAN", +#endif +#if SQLITE_HOMEGROWN_RECURSIVE_MUTEX + "HOMEGROWN_RECURSIVE_MUTEX", +#endif +#if SQLITE_IGNORE_AFP_LOCK_ERRORS + "IGNORE_AFP_LOCK_ERRORS", +#endif +#if SQLITE_IGNORE_FLOCK_LOCK_ERRORS + "IGNORE_FLOCK_LOCK_ERRORS", +#endif +#if SQLITE_INLINE_MEMCPY + "INLINE_MEMCPY", +#endif +#if SQLITE_INT64_TYPE + "INT64_TYPE", +#endif +#ifdef SQLITE_INTEGRITY_CHECK_ERROR_MAX + "INTEGRITY_CHECK_ERROR_MAX=" CTIMEOPT_VAL(SQLITE_INTEGRITY_CHECK_ERROR_MAX), +#endif +#if SQLITE_LIKE_DOESNT_MATCH_BLOBS + "LIKE_DOESNT_MATCH_BLOBS", +#endif +#if SQLITE_LOCK_TRACE + "LOCK_TRACE", +#endif +#if SQLITE_LOG_CACHE_SPILL + "LOG_CACHE_SPILL", +#endif +#ifdef SQLITE_MALLOC_SOFT_LIMIT + "MALLOC_SOFT_LIMIT=" CTIMEOPT_VAL(SQLITE_MALLOC_SOFT_LIMIT), +#endif +#ifdef SQLITE_MAX_ATTACHED + "MAX_ATTACHED=" CTIMEOPT_VAL(SQLITE_MAX_ATTACHED), +#endif +#ifdef SQLITE_MAX_COLUMN + "MAX_COLUMN=" CTIMEOPT_VAL(SQLITE_MAX_COLUMN), +#endif +#ifdef SQLITE_MAX_COMPOUND_SELECT + "MAX_COMPOUND_SELECT=" CTIMEOPT_VAL(SQLITE_MAX_COMPOUND_SELECT), +#endif +#ifdef SQLITE_MAX_DEFAULT_PAGE_SIZE + "MAX_DEFAULT_PAGE_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_DEFAULT_PAGE_SIZE), +#endif +#ifdef SQLITE_MAX_EXPR_DEPTH + "MAX_EXPR_DEPTH=" CTIMEOPT_VAL(SQLITE_MAX_EXPR_DEPTH), +#endif +#ifdef SQLITE_MAX_FUNCTION_ARG + "MAX_FUNCTION_ARG=" CTIMEOPT_VAL(SQLITE_MAX_FUNCTION_ARG), +#endif +#ifdef SQLITE_MAX_LENGTH + "MAX_LENGTH=" CTIMEOPT_VAL(SQLITE_MAX_LENGTH), +#endif +#ifdef SQLITE_MAX_LIKE_PATTERN_LENGTH + "MAX_LIKE_PATTERN_LENGTH=" CTIMEOPT_VAL(SQLITE_MAX_LIKE_PATTERN_LENGTH), +#endif +#ifdef SQLITE_MAX_MEMORY + "MAX_MEMORY=" CTIMEOPT_VAL(SQLITE_MAX_MEMORY), +#endif +#ifdef SQLITE_MAX_MMAP_SIZE + "MAX_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE), +#endif +#ifdef SQLITE_MAX_MMAP_SIZE_ + "MAX_MMAP_SIZE_=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE_), +#endif +#ifdef SQLITE_MAX_PAGE_COUNT + "MAX_PAGE_COUNT=" CTIMEOPT_VAL(SQLITE_MAX_PAGE_COUNT), +#endif +#ifdef SQLITE_MAX_PAGE_SIZE + "MAX_PAGE_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_PAGE_SIZE), +#endif +#ifdef SQLITE_MAX_SCHEMA_RETRY + "MAX_SCHEMA_RETRY=" CTIMEOPT_VAL(SQLITE_MAX_SCHEMA_RETRY), +#endif +#ifdef SQLITE_MAX_SQL_LENGTH + "MAX_SQL_LENGTH=" CTIMEOPT_VAL(SQLITE_MAX_SQL_LENGTH), +#endif +#ifdef SQLITE_MAX_TRIGGER_DEPTH + "MAX_TRIGGER_DEPTH=" CTIMEOPT_VAL(SQLITE_MAX_TRIGGER_DEPTH), +#endif +#ifdef SQLITE_MAX_VARIABLE_NUMBER + "MAX_VARIABLE_NUMBER=" CTIMEOPT_VAL(SQLITE_MAX_VARIABLE_NUMBER), +#endif +#ifdef SQLITE_MAX_VDBE_OP + "MAX_VDBE_OP=" CTIMEOPT_VAL(SQLITE_MAX_VDBE_OP), +#endif +#ifdef SQLITE_MAX_WORKER_THREADS + "MAX_WORKER_THREADS=" CTIMEOPT_VAL(SQLITE_MAX_WORKER_THREADS), +#endif +#if SQLITE_MEMDEBUG + "MEMDEBUG", +#endif +#if SQLITE_MIXED_ENDIAN_64BIT_FLOAT + "MIXED_ENDIAN_64BIT_FLOAT", +#endif +#if SQLITE_MMAP_READWRITE + "MMAP_READWRITE", +#endif +#if SQLITE_MUTEX_NOOP + "MUTEX_NOOP", +#endif +#if SQLITE_MUTEX_NREF + "MUTEX_NREF", +#endif +#if SQLITE_MUTEX_OMIT + "MUTEX_OMIT", +#endif +#if SQLITE_MUTEX_PTHREADS + "MUTEX_PTHREADS", +#endif +#if SQLITE_MUTEX_W32 + "MUTEX_W32", +#endif +#if SQLITE_NEED_ERR_NAME + "NEED_ERR_NAME", +#endif +#if SQLITE_NOINLINE + "NOINLINE", +#endif +#if SQLITE_NO_SYNC + "NO_SYNC", +#endif +#if SQLITE_OMIT_ALTERTABLE + "OMIT_ALTERTABLE", +#endif +#if SQLITE_OMIT_ANALYZE + "OMIT_ANALYZE", +#endif +#if SQLITE_OMIT_ATTACH + "OMIT_ATTACH", +#endif +#if SQLITE_OMIT_AUTHORIZATION + "OMIT_AUTHORIZATION", +#endif +#if SQLITE_OMIT_AUTOINCREMENT + "OMIT_AUTOINCREMENT", +#endif +#if SQLITE_OMIT_AUTOINIT + "OMIT_AUTOINIT", +#endif +#if SQLITE_OMIT_AUTOMATIC_INDEX + "OMIT_AUTOMATIC_INDEX", +#endif +#if SQLITE_OMIT_AUTORESET + "OMIT_AUTORESET", +#endif +#if SQLITE_OMIT_AUTOVACUUM + "OMIT_AUTOVACUUM", +#endif +#if SQLITE_OMIT_BETWEEN_OPTIMIZATION + "OMIT_BETWEEN_OPTIMIZATION", +#endif +#if SQLITE_OMIT_BLOB_LITERAL + "OMIT_BLOB_LITERAL", +#endif +#if SQLITE_OMIT_BTREECOUNT + "OMIT_BTREECOUNT", +#endif +#if SQLITE_OMIT_CAST + "OMIT_CAST", +#endif +#if SQLITE_OMIT_CHECK + "OMIT_CHECK", +#endif +#if SQLITE_OMIT_COMPLETE + "OMIT_COMPLETE", +#endif +#if SQLITE_OMIT_COMPOUND_SELECT + "OMIT_COMPOUND_SELECT", +#endif +#if SQLITE_OMIT_CONFLICT_CLAUSE + "OMIT_CONFLICT_CLAUSE", +#endif +#if SQLITE_OMIT_CTE + "OMIT_CTE", +#endif +#if SQLITE_OMIT_DATETIME_FUNCS + "OMIT_DATETIME_FUNCS", +#endif +#if SQLITE_OMIT_DECLTYPE + "OMIT_DECLTYPE", +#endif +#if SQLITE_OMIT_DEPRECATED + "OMIT_DEPRECATED", +#endif +#if SQLITE_OMIT_DISKIO + "OMIT_DISKIO", +#endif +#if SQLITE_OMIT_EXPLAIN + "OMIT_EXPLAIN", +#endif +#if SQLITE_OMIT_FLAG_PRAGMAS + "OMIT_FLAG_PRAGMAS", +#endif +#if SQLITE_OMIT_FLOATING_POINT + "OMIT_FLOATING_POINT", +#endif +#if SQLITE_OMIT_FOREIGN_KEY + "OMIT_FOREIGN_KEY", +#endif +#if SQLITE_OMIT_GET_TABLE + "OMIT_GET_TABLE", +#endif +#if SQLITE_OMIT_HEX_INTEGER + "OMIT_HEX_INTEGER", +#endif +#if SQLITE_OMIT_INCRBLOB + "OMIT_INCRBLOB", +#endif +#if SQLITE_OMIT_INTEGRITY_CHECK + "OMIT_INTEGRITY_CHECK", +#endif +#if SQLITE_OMIT_LIKE_OPTIMIZATION + "OMIT_LIKE_OPTIMIZATION", +#endif +#if SQLITE_OMIT_LOAD_EXTENSION + "OMIT_LOAD_EXTENSION", +#endif +#if SQLITE_OMIT_LOCALTIME + "OMIT_LOCALTIME", +#endif +#if SQLITE_OMIT_LOOKASIDE + "OMIT_LOOKASIDE", +#endif +#if SQLITE_OMIT_MEMORYDB + "OMIT_MEMORYDB", +#endif +#if SQLITE_OMIT_OR_OPTIMIZATION + "OMIT_OR_OPTIMIZATION", +#endif +#if SQLITE_OMIT_PAGER_PRAGMAS + "OMIT_PAGER_PRAGMAS", +#endif +#if SQLITE_OMIT_PARSER_TRACE + "OMIT_PARSER_TRACE", +#endif +#if SQLITE_OMIT_POPEN + "OMIT_POPEN", +#endif +#if SQLITE_OMIT_PRAGMA + "OMIT_PRAGMA", +#endif +#if SQLITE_OMIT_PROGRESS_CALLBACK + "OMIT_PROGRESS_CALLBACK", +#endif +#if SQLITE_OMIT_QUICKBALANCE + "OMIT_QUICKBALANCE", +#endif +#if SQLITE_OMIT_REINDEX + "OMIT_REINDEX", +#endif +#if SQLITE_OMIT_SCHEMA_PRAGMAS + "OMIT_SCHEMA_PRAGMAS", +#endif +#if SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS + "OMIT_SCHEMA_VERSION_PRAGMAS", +#endif +#if SQLITE_OMIT_SHARED_CACHE + "OMIT_SHARED_CACHE", +#endif +#if SQLITE_OMIT_SHUTDOWN_DIRECTORIES + "OMIT_SHUTDOWN_DIRECTORIES", +#endif +#if SQLITE_OMIT_SUBQUERY + "OMIT_SUBQUERY", +#endif +#if SQLITE_OMIT_TCL_VARIABLE + "OMIT_TCL_VARIABLE", +#endif +#if SQLITE_OMIT_TEMPDB + "OMIT_TEMPDB", +#endif +#if SQLITE_OMIT_TEST_CONTROL + "OMIT_TEST_CONTROL", +#endif +#if SQLITE_OMIT_TRACE + "OMIT_TRACE", +#endif +#if SQLITE_OMIT_TRIGGER + "OMIT_TRIGGER", +#endif +#if SQLITE_OMIT_TRUNCATE_OPTIMIZATION + "OMIT_TRUNCATE_OPTIMIZATION", +#endif +#if SQLITE_OMIT_UTF16 + "OMIT_UTF16", +#endif +#if SQLITE_OMIT_VACUUM + "OMIT_VACUUM", +#endif +#if SQLITE_OMIT_VIEW + "OMIT_VIEW", +#endif +#if SQLITE_OMIT_VIRTUALTABLE + "OMIT_VIRTUALTABLE", +#endif +#if SQLITE_OMIT_WAL + "OMIT_WAL", +#endif +#if SQLITE_OMIT_WSD + "OMIT_WSD", +#endif +#if SQLITE_OMIT_XFER_OPT + "OMIT_XFER_OPT", +#endif +#if SQLITE_PCACHE_SEPARATE_HEADER + "PCACHE_SEPARATE_HEADER", +#endif +#if SQLITE_PERFORMANCE_TRACE + "PERFORMANCE_TRACE", +#endif +#if SQLITE_POWERSAFE_OVERWRITE + "POWERSAFE_OVERWRITE", +#endif +#if SQLITE_PREFER_PROXY_LOCKING + "PREFER_PROXY_LOCKING", +#endif +#if SQLITE_PROXY_DEBUG + "PROXY_DEBUG", +#endif +#if SQLITE_REVERSE_UNORDERED_SELECTS + "REVERSE_UNORDERED_SELECTS", +#endif +#if SQLITE_RTREE_INT_ONLY + "RTREE_INT_ONLY", +#endif +#if SQLITE_SECURE_DELETE + "SECURE_DELETE", +#endif +#if SQLITE_SMALL_STACK + "SMALL_STACK", +#endif +#ifdef SQLITE_SORTER_PMASZ + "SORTER_PMASZ=" CTIMEOPT_VAL(SQLITE_SORTER_PMASZ), +#endif +#if SQLITE_SOUNDEX + "SOUNDEX", +#endif +#ifdef SQLITE_STAT4_SAMPLES + "STAT4_SAMPLES=" CTIMEOPT_VAL(SQLITE_STAT4_SAMPLES), +#endif +#ifdef SQLITE_STMTJRNL_SPILL + "STMTJRNL_SPILL=" CTIMEOPT_VAL(SQLITE_STMTJRNL_SPILL), +#endif +#if SQLITE_SUBSTR_COMPATIBILITY + "SUBSTR_COMPATIBILITY", +#endif +#if SQLITE_SYSTEM_MALLOC + "SYSTEM_MALLOC", +#endif +#if SQLITE_TCL + "TCL", +#endif +#ifdef SQLITE_TEMP_STORE + "TEMP_STORE=" CTIMEOPT_VAL(SQLITE_TEMP_STORE), +#endif +#if SQLITE_TEST + "TEST", +#endif +#if defined(SQLITE_THREADSAFE) + "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE), +#elif defined(THREADSAFE) + "THREADSAFE=" CTIMEOPT_VAL(THREADSAFE), +#else + "THREADSAFE=1", +#endif +#if SQLITE_UNLINK_AFTER_CLOSE + "UNLINK_AFTER_CLOSE", +#endif +#if SQLITE_UNTESTABLE + "UNTESTABLE", +#endif +#if SQLITE_USER_AUTHENTICATION + "USER_AUTHENTICATION", +#endif +#if SQLITE_USE_ALLOCA + "USE_ALLOCA", +#endif +#if SQLITE_USE_FCNTL_TRACE + "USE_FCNTL_TRACE", +#endif +#if SQLITE_USE_URI + "USE_URI", +#endif +#if SQLITE_VDBE_COVERAGE + "VDBE_COVERAGE", +#endif +#if SQLITE_WIN32_MALLOC + "WIN32_MALLOC", +#endif +#if SQLITE_ZERO_MALLOC + "ZERO_MALLOC", +#endif +/* +** END CODE GENERATED BY tool/mkctime.tcl +*/ +}; + +SQLITE_PRIVATE const char **sqlite3CompileOptions(int *pnOpt){ + *pnOpt = sizeof(sqlite3azCompileOpt) / sizeof(sqlite3azCompileOpt[0]); + return (const char**)sqlite3azCompileOpt; +} + +#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ + +/************** End of ctime.c ***********************************************/ /************** Begin file sqliteInt.h ***************************************/ /* ** 2001 September 15 @@ -78,14 +835,6 @@ #endif /* -** Make sure that rand_s() is available on Windows systems with MSVC 2005 -** or higher. -*/ -#if defined(_MSC_VER) && _MSC_VER>=1400 -# define _CRT_RAND_S -#endif - -/* ** Include the header file used to customize the compiler options for MSVC. ** This should be done first so that it can successfully prevent spurious ** compiler warnings due to subsequent content in this file and other files @@ -206,23 +955,24 @@ # define _LARGEFILE_SOURCE 1 #endif -/* The GCC_VERSION, CLANG_VERSION, and MSVC_VERSION macros are used to +/* The GCC_VERSION and MSVC_VERSION macros are used to ** conditionally include optimizations for each of these compilers. A ** value of 0 means that compiler is not being used. The ** SQLITE_DISABLE_INTRINSIC macro means do not use any compiler-specific ** optimizations, and hence set all compiler macros to 0 +** +** There was once also a CLANG_VERSION macro. However, we learn that the +** version numbers in clang are for "marketing" only and are inconsistent +** and unreliable. Fortunately, all versions of clang also recognize the +** gcc version numbers and have reasonable settings for gcc version numbers, +** so the GCC_VERSION macro will be set to a correct non-zero value even +** when compiling with clang. */ #if defined(__GNUC__) && !defined(SQLITE_DISABLE_INTRINSIC) # define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__) #else # define GCC_VERSION 0 #endif -#if defined(__clang__) && !defined(_WIN32) && !defined(SQLITE_DISABLE_INTRINSIC) -# define CLANG_VERSION \ - (__clang_major__*1000000+__clang_minor__*1000+__clang_patchlevel__) -#else -# define CLANG_VERSION 0 -#endif #if defined(_MSC_VER) && !defined(SQLITE_DISABLE_INTRINSIC) # define MSVC_VERSION _MSC_VER #else @@ -277,7 +1027,7 @@ /************** Include sqlite3.h in the middle of sqliteInt.h ***************/ /************** Begin file sqlite3.h *****************************************/ /* -** 2001 September 15 +** 2001-09-15 ** ** The author disclaims copyright to this source code. In place of ** a legal notice, here is a blessing: @@ -392,16 +1142,18 @@ extern "C" { ** system</a>. ^The SQLITE_SOURCE_ID macro evaluates to ** a string which identifies a particular check-in of SQLite ** within its configuration management system. ^The SQLITE_SOURCE_ID -** string contains the date and time of the check-in (UTC) and an SHA1 -** hash of the entire source tree. +** string contains the date and time of the check-in (UTC) and a SHA1 +** or SHA3-256 hash of the entire source tree. If the source code has +** been edited in any way since it was last checked in, then the last +** four hexadecimal digits of the hash may be modified. ** ** See also: [sqlite3_libversion()], ** [sqlite3_libversion_number()], [sqlite3_sourceid()], ** [sqlite_version()] and [sqlite_source_id()]. */ -#define SQLITE_VERSION "3.17.0" -#define SQLITE_VERSION_NUMBER 3017000 -#define SQLITE_SOURCE_ID "2017-02-13 16:02:40 ada05cfa86ad7f5645450ac7a2a21c9aa6e57d2c" +#define SQLITE_VERSION "3.24.0" +#define SQLITE_VERSION_NUMBER 3024000 +#define SQLITE_SOURCE_ID "2018-06-04 19:24:41 c7ee0833225bfd8c5ec2f9bf62b97c4e04d03bd9566366d5221ac8fb199a87ca" /* ** CAPI3REF: Run-Time Library Version Numbers @@ -417,7 +1169,7 @@ extern "C" { ** ** <blockquote><pre> ** assert( sqlite3_libversion_number()==SQLITE_VERSION_NUMBER ); -** assert( strcmp(sqlite3_sourceid(),SQLITE_SOURCE_ID)==0 ); +** assert( strncmp(sqlite3_sourceid(),SQLITE_SOURCE_ID,80)==0 ); ** assert( strcmp(sqlite3_libversion(),SQLITE_VERSION)==0 ); ** </pre></blockquote>)^ ** @@ -427,9 +1179,11 @@ extern "C" { ** function is provided for use in DLLs since DLL users usually do not have ** direct access to string constants within the DLL. ^The ** sqlite3_libversion_number() function returns an integer equal to -** [SQLITE_VERSION_NUMBER]. ^The sqlite3_sourceid() function returns +** [SQLITE_VERSION_NUMBER]. ^(The sqlite3_sourceid() function returns ** a pointer to a string constant whose value is the same as the -** [SQLITE_SOURCE_ID] C preprocessor macro. +** [SQLITE_SOURCE_ID] C preprocessor macro. Except if SQLite is built +** using an edited copy of [the amalgamation], then the last four characters +** of the hash might be different from [SQLITE_SOURCE_ID].)^ ** ** See also: [sqlite_version()] and [sqlite_source_id()]. */ @@ -695,7 +1449,7 @@ SQLITE_API int sqlite3_exec( */ #define SQLITE_OK 0 /* Successful result */ /* beginning-of-error-codes */ -#define SQLITE_ERROR 1 /* SQL error or missing database */ +#define SQLITE_ERROR 1 /* Generic error */ #define SQLITE_INTERNAL 2 /* Internal logic error in SQLite */ #define SQLITE_PERM 3 /* Access permission denied */ #define SQLITE_ABORT 4 /* Callback routine requested an abort */ @@ -710,7 +1464,7 @@ SQLITE_API int sqlite3_exec( #define SQLITE_FULL 13 /* Insertion failed because database is full */ #define SQLITE_CANTOPEN 14 /* Unable to open the database file */ #define SQLITE_PROTOCOL 15 /* Database lock protocol error */ -#define SQLITE_EMPTY 16 /* Database is empty */ +#define SQLITE_EMPTY 16 /* Internal use only */ #define SQLITE_SCHEMA 17 /* The database schema changed */ #define SQLITE_TOOBIG 18 /* String or BLOB exceeds size limit */ #define SQLITE_CONSTRAINT 19 /* Abort due to constraint violation */ @@ -718,7 +1472,7 @@ SQLITE_API int sqlite3_exec( #define SQLITE_MISUSE 21 /* Library used incorrectly */ #define SQLITE_NOLFS 22 /* Uses OS features not supported on host */ #define SQLITE_AUTH 23 /* Authorization denied */ -#define SQLITE_FORMAT 24 /* Auxiliary database format error */ +#define SQLITE_FORMAT 24 /* Not used */ #define SQLITE_RANGE 25 /* 2nd parameter to sqlite3_bind out of range */ #define SQLITE_NOTADB 26 /* File opened that is not a database file */ #define SQLITE_NOTICE 27 /* Notifications from sqlite3_log() */ @@ -744,6 +1498,8 @@ SQLITE_API int sqlite3_exec( ** the most recent error can be obtained using ** [sqlite3_extended_errcode()]. */ +#define SQLITE_ERROR_MISSING_COLLSEQ (SQLITE_ERROR | (1<<8)) +#define SQLITE_ERROR_RETRY (SQLITE_ERROR | (2<<8)) #define SQLITE_IOERR_READ (SQLITE_IOERR | (1<<8)) #define SQLITE_IOERR_SHORT_READ (SQLITE_IOERR | (2<<8)) #define SQLITE_IOERR_WRITE (SQLITE_IOERR | (3<<8)) @@ -772,7 +1528,11 @@ SQLITE_API int sqlite3_exec( #define SQLITE_IOERR_CONVPATH (SQLITE_IOERR | (26<<8)) #define SQLITE_IOERR_VNODE (SQLITE_IOERR | (27<<8)) #define SQLITE_IOERR_AUTH (SQLITE_IOERR | (28<<8)) +#define SQLITE_IOERR_BEGIN_ATOMIC (SQLITE_IOERR | (29<<8)) +#define SQLITE_IOERR_COMMIT_ATOMIC (SQLITE_IOERR | (30<<8)) +#define SQLITE_IOERR_ROLLBACK_ATOMIC (SQLITE_IOERR | (31<<8)) #define SQLITE_LOCKED_SHAREDCACHE (SQLITE_LOCKED | (1<<8)) +#define SQLITE_LOCKED_VTAB (SQLITE_LOCKED | (2<<8)) #define SQLITE_BUSY_RECOVERY (SQLITE_BUSY | (1<<8)) #define SQLITE_BUSY_SNAPSHOT (SQLITE_BUSY | (2<<8)) #define SQLITE_CANTOPEN_NOTEMPDIR (SQLITE_CANTOPEN | (1<<8)) @@ -780,10 +1540,13 @@ SQLITE_API int sqlite3_exec( #define SQLITE_CANTOPEN_FULLPATH (SQLITE_CANTOPEN | (3<<8)) #define SQLITE_CANTOPEN_CONVPATH (SQLITE_CANTOPEN | (4<<8)) #define SQLITE_CORRUPT_VTAB (SQLITE_CORRUPT | (1<<8)) +#define SQLITE_CORRUPT_SEQUENCE (SQLITE_CORRUPT | (2<<8)) #define SQLITE_READONLY_RECOVERY (SQLITE_READONLY | (1<<8)) #define SQLITE_READONLY_CANTLOCK (SQLITE_READONLY | (2<<8)) #define SQLITE_READONLY_ROLLBACK (SQLITE_READONLY | (3<<8)) #define SQLITE_READONLY_DBMOVED (SQLITE_READONLY | (4<<8)) +#define SQLITE_READONLY_CANTINIT (SQLITE_READONLY | (5<<8)) +#define SQLITE_READONLY_DIRECTORY (SQLITE_READONLY | (6<<8)) #define SQLITE_ABORT_ROLLBACK (SQLITE_ABORT | (2<<8)) #define SQLITE_CONSTRAINT_CHECK (SQLITE_CONSTRAINT | (1<<8)) #define SQLITE_CONSTRAINT_COMMITHOOK (SQLITE_CONSTRAINT | (2<<8)) @@ -858,6 +1621,11 @@ SQLITE_API int sqlite3_exec( ** SQLITE_IOCAP_IMMUTABLE flag indicates that the file is on ** read-only media and cannot be changed even by processes with ** elevated privileges. +** +** The SQLITE_IOCAP_BATCH_ATOMIC property means that the underlying +** filesystem supports doing multiple write operations atomically when those +** write operations are bracketed by [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] and +** [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. */ #define SQLITE_IOCAP_ATOMIC 0x00000001 #define SQLITE_IOCAP_ATOMIC512 0x00000002 @@ -873,6 +1641,7 @@ SQLITE_API int sqlite3_exec( #define SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN 0x00000800 #define SQLITE_IOCAP_POWERSAFE_OVERWRITE 0x00001000 #define SQLITE_IOCAP_IMMUTABLE 0x00002000 +#define SQLITE_IOCAP_BATCH_ATOMIC 0x00004000 /* ** CAPI3REF: File Locking Levels @@ -1007,6 +1776,7 @@ struct sqlite3_file { ** <li> [SQLITE_IOCAP_UNDELETABLE_WHEN_OPEN] ** <li> [SQLITE_IOCAP_POWERSAFE_OVERWRITE] ** <li> [SQLITE_IOCAP_IMMUTABLE] +** <li> [SQLITE_IOCAP_BATCH_ATOMIC] ** </ul> ** ** The SQLITE_IOCAP_ATOMIC property means that all writes of @@ -1135,7 +1905,7 @@ struct sqlite3_io_methods { ** opcode allows these two values (10 retries and 25 milliseconds of delay) ** to be adjusted. The values are changed for all database connections ** within the same process. The argument is a pointer to an array of two -** integers where the first integer i the new retry count and the second +** integers where the first integer is the new retry count and the second ** integer is the delay. If either integer is negative, then the setting ** is not changed but instead the prior value of that setting is written ** into the array entry, allowing the current retry settings to be @@ -1290,6 +2060,46 @@ struct sqlite3_io_methods { ** The [SQLITE_FCNTL_RBU] opcode is implemented by the special VFS used by ** the RBU extension only. All other VFS should return SQLITE_NOTFOUND for ** this opcode. +** +** <li>[[SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]] +** If the [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] opcode returns SQLITE_OK, then +** the file descriptor is placed in "batch write mode", which +** means all subsequent write operations will be deferred and done +** atomically at the next [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]. Systems +** that do not support batch atomic writes will return SQLITE_NOTFOUND. +** ^Following a successful SQLITE_FCNTL_BEGIN_ATOMIC_WRITE and prior to +** the closing [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] or +** [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE], SQLite will make +** no VFS interface calls on the same [sqlite3_file] file descriptor +** except for calls to the xWrite method and the xFileControl method +** with [SQLITE_FCNTL_SIZE_HINT]. +** +** <li>[[SQLITE_FCNTL_COMMIT_ATOMIC_WRITE]] +** The [SQLITE_FCNTL_COMMIT_ATOMIC_WRITE] opcode causes all write +** operations since the previous successful call to +** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be performed atomically. +** This file control returns [SQLITE_OK] if and only if the writes were +** all performed successfully and have been committed to persistent storage. +** ^Regardless of whether or not it is successful, this file control takes +** the file descriptor out of batch write mode so that all subsequent +** write operations are independent. +** ^SQLite will never invoke SQLITE_FCNTL_COMMIT_ATOMIC_WRITE without +** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. +** +** <li>[[SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE]] +** The [SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE] opcode causes all write +** operations since the previous successful call to +** [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE] to be rolled back. +** ^This file control takes the file descriptor out of batch write mode +** so that all subsequent write operations are independent. +** ^SQLite will never invoke SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE without +** a prior successful call to [SQLITE_FCNTL_BEGIN_ATOMIC_WRITE]. +** +** <li>[[SQLITE_FCNTL_LOCK_TIMEOUT]] +** The [SQLITE_FCNTL_LOCK_TIMEOUT] opcode causes attempts to obtain +** a file lock using the xLock or xShmLock methods of the VFS to wait +** for up to M milliseconds before failing, where M is the single +** unsigned integer parameter. ** </ul> */ #define SQLITE_FCNTL_LOCKSTATE 1 @@ -1321,6 +2131,10 @@ struct sqlite3_io_methods { #define SQLITE_FCNTL_JOURNAL_POINTER 28 #define SQLITE_FCNTL_WIN32_GET_HANDLE 29 #define SQLITE_FCNTL_PDB 30 +#define SQLITE_FCNTL_BEGIN_ATOMIC_WRITE 31 +#define SQLITE_FCNTL_COMMIT_ATOMIC_WRITE 32 +#define SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE 33 +#define SQLITE_FCNTL_LOCK_TIMEOUT 34 /* deprecated names */ #define SQLITE_GET_LOCKPROXYFILE SQLITE_FCNTL_GET_LOCKPROXYFILE @@ -1358,12 +2172,18 @@ typedef struct sqlite3_api_routines sqlite3_api_routines; ** in the name of the object stands for "virtual file system". See ** the [VFS | VFS documentation] for further information. ** -** The value of the iVersion field is initially 1 but may be larger in -** future versions of SQLite. Additional fields may be appended to this -** object when the iVersion value is increased. Note that the structure -** of the sqlite3_vfs object changes in the transaction between -** SQLite version 3.5.9 and 3.6.0 and yet the iVersion field was not -** modified. +** The VFS interface is sometimes extended by adding new methods onto +** the end. Each time such an extension occurs, the iVersion field +** is incremented. The iVersion value started out as 1 in +** SQLite [version 3.5.0] on [dateof:3.5.0], then increased to 2 +** with SQLite [version 3.7.0] on [dateof:3.7.0], and then increased +** to 3 with SQLite [version 3.7.6] on [dateof:3.7.6]. Additional fields +** may be appended to the sqlite3_vfs object and the iVersion value +** may increase again in future versions of SQLite. +** Note that the structure +** of the sqlite3_vfs object changes in the transition from +** SQLite [version 3.5.9] to [version 3.6.0] on [dateof:3.6.0] +** and yet the iVersion field was not modified. ** ** The szOsFile field is the size of the subclassed [sqlite3_file] ** structure used by this VFS. mxPathname is the maximum length of @@ -1891,6 +2711,16 @@ struct sqlite3_mem_methods { ** routines with a wrapper that simulations memory allocation failure or ** tracks memory usage, for example. </dd> ** +** [[SQLITE_CONFIG_SMALL_MALLOC]] <dt>SQLITE_CONFIG_SMALL_MALLOC</dt> +** <dd> ^The SQLITE_CONFIG_SMALL_MALLOC option takes single argument of +** type int, interpreted as a boolean, which if true provides a hint to +** SQLite that it should avoid large memory allocations if possible. +** SQLite will run faster if it is free to make large memory allocations, +** but some application might prefer to run slower in exchange for +** guarantees about memory fragmentation that are possible if large +** allocations are avoided. This hint is normally off. +** </dd> +** ** [[SQLITE_CONFIG_MEMSTATUS]] <dt>SQLITE_CONFIG_MEMSTATUS</dt> ** <dd> ^The SQLITE_CONFIG_MEMSTATUS option takes single argument of type int, ** interpreted as a boolean, which enables or disables the collection of @@ -1908,25 +2738,7 @@ struct sqlite3_mem_methods { ** </dd> ** ** [[SQLITE_CONFIG_SCRATCH]] <dt>SQLITE_CONFIG_SCRATCH</dt> -** <dd> ^The SQLITE_CONFIG_SCRATCH option specifies a static memory buffer -** that SQLite can use for scratch memory. ^(There are three arguments -** to SQLITE_CONFIG_SCRATCH: A pointer an 8-byte -** aligned memory buffer from which the scratch allocations will be -** drawn, the size of each scratch allocation (sz), -** and the maximum number of scratch allocations (N).)^ -** The first argument must be a pointer to an 8-byte aligned buffer -** of at least sz*N bytes of memory. -** ^SQLite will not use more than one scratch buffers per thread. -** ^SQLite will never request a scratch buffer that is more than 6 -** times the database page size. -** ^If SQLite needs needs additional -** scratch memory beyond what is provided by this configuration option, then -** [sqlite3_malloc()] will be used to obtain the memory needed.<p> -** ^When the application provides any amount of scratch memory using -** SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary large -** [sqlite3_malloc|heap allocations]. -** This can help [Robson proof|prevent memory allocation failures] due to heap -** fragmentation in low-memory embedded systems. +** <dd> The SQLITE_CONFIG_SCRATCH option is no longer used. ** </dd> ** ** [[SQLITE_CONFIG_PAGECACHE]] <dt>SQLITE_CONFIG_PAGECACHE</dt> @@ -1962,8 +2774,7 @@ struct sqlite3_mem_methods { ** [[SQLITE_CONFIG_HEAP]] <dt>SQLITE_CONFIG_HEAP</dt> ** <dd> ^The SQLITE_CONFIG_HEAP option specifies a static memory buffer ** that SQLite will use for all of its dynamic memory allocation needs -** beyond those provided for by [SQLITE_CONFIG_SCRATCH] and -** [SQLITE_CONFIG_PAGECACHE]. +** beyond those provided for by [SQLITE_CONFIG_PAGECACHE]. ** ^The SQLITE_CONFIG_HEAP option is only available if SQLite is compiled ** with either [SQLITE_ENABLE_MEMSYS3] or [SQLITE_ENABLE_MEMSYS5] and returns ** [SQLITE_ERROR] if invoked otherwise. @@ -2149,6 +2960,22 @@ struct sqlite3_mem_methods { ** I/O required to support statement rollback. ** The default value for this setting is controlled by the ** [SQLITE_STMTJRNL_SPILL] compile-time option. +** +** [[SQLITE_CONFIG_SORTERREF_SIZE]] +** <dt>SQLITE_CONFIG_SORTERREF_SIZE +** <dd>The SQLITE_CONFIG_SORTERREF_SIZE option accepts a single parameter +** of type (int) - the new value of the sorter-reference size threshold. +** Usually, when SQLite uses an external sort to order records according +** to an ORDER BY clause, all fields required by the caller are present in the +** sorted records. However, if SQLite determines based on the declared type +** of a table column that its values are likely to be very large - larger +** than the configured sorter-reference size threshold - then a reference +** is stored in each sorted record and the required column values loaded +** from the database as records are returned in sorted order. The default +** value for this option is to never use this optimization. Specifying a +** negative value for this option restores the default behaviour. +** This option is only available if SQLite is compiled with the +** [SQLITE_ENABLE_SORTER_REFERENCES] compile-time option. ** </dl> */ #define SQLITE_CONFIG_SINGLETHREAD 1 /* nil */ @@ -2156,7 +2983,7 @@ struct sqlite3_mem_methods { #define SQLITE_CONFIG_SERIALIZED 3 /* nil */ #define SQLITE_CONFIG_MALLOC 4 /* sqlite3_mem_methods* */ #define SQLITE_CONFIG_GETMALLOC 5 /* sqlite3_mem_methods* */ -#define SQLITE_CONFIG_SCRATCH 6 /* void*, int sz, int N */ +#define SQLITE_CONFIG_SCRATCH 6 /* No longer used */ #define SQLITE_CONFIG_PAGECACHE 7 /* void*, int sz, int N */ #define SQLITE_CONFIG_HEAP 8 /* void*, int nByte, int min */ #define SQLITE_CONFIG_MEMSTATUS 9 /* boolean */ @@ -2177,6 +3004,8 @@ struct sqlite3_mem_methods { #define SQLITE_CONFIG_PCACHE_HDRSZ 24 /* int *psz */ #define SQLITE_CONFIG_PMASZ 25 /* unsigned int szPma */ #define SQLITE_CONFIG_STMTJRNL_SPILL 26 /* int nByte */ +#define SQLITE_CONFIG_SMALL_MALLOC 27 /* boolean */ +#define SQLITE_CONFIG_SORTERREF_SIZE 28 /* int nByte */ /* ** CAPI3REF: Database Connection Configuration Options @@ -2279,12 +3108,55 @@ struct sqlite3_mem_methods { ** connections at all to the database. If so, it performs a checkpoint ** operation before closing the connection. This option may be used to ** override this behaviour. The first parameter passed to this operation -** is an integer - non-zero to disable checkpoints-on-close, or zero (the -** default) to enable them. The second parameter is a pointer to an integer +** is an integer - positive to disable checkpoints-on-close, or zero (the +** default) to enable them, and negative to leave the setting unchanged. +** The second parameter is a pointer to an integer ** into which is written 0 or 1 to indicate whether checkpoints-on-close ** have been disabled - 0 if they are not disabled, 1 if they are. ** </dd> ** +** <dt>SQLITE_DBCONFIG_ENABLE_QPSG</dt> +** <dd>^(The SQLITE_DBCONFIG_ENABLE_QPSG option activates or deactivates +** the [query planner stability guarantee] (QPSG). When the QPSG is active, +** a single SQL query statement will always use the same algorithm regardless +** of values of [bound parameters].)^ The QPSG disables some query optimizations +** that look at the values of bound parameters, which can make some queries +** slower. But the QPSG has the advantage of more predictable behavior. With +** the QPSG active, SQLite will always use the same query plan in the field as +** was used during testing in the lab. +** The first argument to this setting is an integer which is 0 to disable +** the QPSG, positive to enable QPSG, or negative to leave the setting +** unchanged. The second parameter is a pointer to an integer into which +** is written 0 or 1 to indicate whether the QPSG is disabled or enabled +** following this call. +** </dd> +** +** <dt>SQLITE_DBCONFIG_TRIGGER_EQP</dt> +** <dd> By default, the output of EXPLAIN QUERY PLAN commands does not +** include output for any operations performed by trigger programs. This +** option is used to set or clear (the default) a flag that governs this +** behavior. The first parameter passed to this operation is an integer - +** positive to enable output for trigger programs, or zero to disable it, +** or negative to leave the setting unchanged. +** The second parameter is a pointer to an integer into which is written +** 0 or 1 to indicate whether output-for-triggers has been disabled - 0 if +** it is not disabled, 1 if it is. +** </dd> +** +** <dt>SQLITE_DBCONFIG_RESET_DATABASE</dt> +** <dd> Set the SQLITE_DBCONFIG_RESET_DATABASE flag and then run +** [VACUUM] in order to reset a database back to an empty database +** with no schema and no content. The following process works even for +** a badly corrupted database file: +** <ol> +** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 1, 0); +** <li> [sqlite3_exec](db, "[VACUUM]", 0, 0, 0); +** <li> sqlite3_db_config(db, SQLITE_DBCONFIG_RESET_DATABASE, 0, 0); +** </ol> +** Because resetting a database is destructive and irreversible, the +** process requires the use of this obscure API and multiple steps to help +** ensure that it does not happen by accident. +** </dd> ** </dl> */ #define SQLITE_DBCONFIG_MAINDBNAME 1000 /* const char* */ @@ -2294,7 +3166,10 @@ struct sqlite3_mem_methods { #define SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER 1004 /* int int* */ #define SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION 1005 /* int int* */ #define SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE 1006 /* int int* */ - +#define SQLITE_DBCONFIG_ENABLE_QPSG 1007 /* int int* */ +#define SQLITE_DBCONFIG_TRIGGER_EQP 1008 /* int int* */ +#define SQLITE_DBCONFIG_RESET_DATABASE 1009 /* int int* */ +#define SQLITE_DBCONFIG_MAX 1009 /* Largest DBCONFIG */ /* ** CAPI3REF: Enable Or Disable Extended Result Codes @@ -2318,20 +3193,30 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); ** the table has a column of type [INTEGER PRIMARY KEY] then that column ** is another alias for the rowid. ** -** ^The sqlite3_last_insert_rowid(D) interface returns the [rowid] of the -** most recent successful [INSERT] into a rowid table or [virtual table] -** on database connection D. -** ^Inserts into [WITHOUT ROWID] tables are not recorded. -** ^If no successful [INSERT]s into rowid tables -** have ever occurred on the database connection D, -** then sqlite3_last_insert_rowid(D) returns zero. -** -** ^(If an [INSERT] occurs within a trigger or within a [virtual table] -** method, then this routine will return the [rowid] of the inserted -** row as long as the trigger or virtual table method is running. -** But once the trigger or virtual table method ends, the value returned -** by this routine reverts to what it was before the trigger or virtual -** table method began.)^ +** ^The sqlite3_last_insert_rowid(D) interface usually returns the [rowid] of +** the most recent successful [INSERT] into a rowid table or [virtual table] +** on database connection D. ^Inserts into [WITHOUT ROWID] tables are not +** recorded. ^If no successful [INSERT]s into rowid tables have ever occurred +** on the database connection D, then sqlite3_last_insert_rowid(D) returns +** zero. +** +** As well as being set automatically as rows are inserted into database +** tables, the value returned by this function may be set explicitly by +** [sqlite3_set_last_insert_rowid()] +** +** Some virtual table implementations may INSERT rows into rowid tables as +** part of committing a transaction (e.g. to flush data accumulated in memory +** to disk). In this case subsequent calls to this function return the rowid +** associated with these internal INSERT operations, which leads to +** unintuitive results. Virtual table implementations that do write to rowid +** tables in this way can avoid this problem by restoring the original +** rowid value using [sqlite3_set_last_insert_rowid()] before returning +** control to the user. +** +** ^(If an [INSERT] occurs within a trigger then this routine will +** return the [rowid] of the inserted row as long as the trigger is +** running. Once the trigger program ends, the value returned +** by this routine reverts to what it was before the trigger was fired.)^ ** ** ^An [INSERT] that fails due to a constraint violation is not a ** successful [INSERT] and does not change the value returned by this @@ -2359,6 +3244,16 @@ SQLITE_API int sqlite3_extended_result_codes(sqlite3*, int onoff); SQLITE_API sqlite3_int64 sqlite3_last_insert_rowid(sqlite3*); /* +** CAPI3REF: Set the Last Insert Rowid value. +** METHOD: sqlite3 +** +** The sqlite3_set_last_insert_rowid(D, R) method allows the application to +** set the value returned by calling sqlite3_last_insert_rowid(D) to R +** without inserting a row into the database. +*/ +SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3*,sqlite3_int64); + +/* ** CAPI3REF: Count The Number Of Rows Modified ** METHOD: sqlite3 ** @@ -2469,9 +3364,6 @@ SQLITE_API int sqlite3_total_changes(sqlite3*); ** ^A call to sqlite3_interrupt(D) that occurs when there are no running ** SQL statements is a no-op and has no effect on SQL statements ** that are started after the sqlite3_interrupt() call returns. -** -** If the database connection closes while [sqlite3_interrupt()] -** is running then bad things will likely happen. */ SQLITE_API void sqlite3_interrupt(sqlite3*); @@ -2683,16 +3575,16 @@ SQLITE_API void sqlite3_free_table(char **result); ** ** These routines are work-alikes of the "printf()" family of functions ** from the standard C library. -** These routines understand most of the common K&R formatting options, -** plus some additional non-standard formats, detailed below. -** Note that some of the more obscure formatting options from recent -** C-library standards are omitted from this implementation. +** These routines understand most of the common formatting options from +** the standard library printf() +** plus some additional non-standard formats ([%q], [%Q], [%w], and [%z]). +** See the [built-in printf()] documentation for details. ** ** ^The sqlite3_mprintf() and sqlite3_vmprintf() routines write their -** results into memory obtained from [sqlite3_malloc()]. +** results into memory obtained from [sqlite3_malloc64()]. ** The strings returned by these two routines should be ** released by [sqlite3_free()]. ^Both routines return a -** NULL pointer if [sqlite3_malloc()] is unable to allocate enough +** NULL pointer if [sqlite3_malloc64()] is unable to allocate enough ** memory to hold the resulting string. ** ** ^(The sqlite3_snprintf() routine is similar to "snprintf()" from @@ -2716,71 +3608,7 @@ SQLITE_API void sqlite3_free_table(char **result); ** ** ^The sqlite3_vsnprintf() routine is a varargs version of sqlite3_snprintf(). ** -** These routines all implement some additional formatting -** options that are useful for constructing SQL statements. -** All of the usual printf() formatting options apply. In addition, there -** is are "%q", "%Q", "%w" and "%z" options. -** -** ^(The %q option works like %s in that it substitutes a nul-terminated -** string from the argument list. But %q also doubles every '\'' character. -** %q is designed for use inside a string literal.)^ By doubling each '\'' -** character it escapes that character and allows it to be inserted into -** the string. -** -** For example, assume the string variable zText contains text as follows: -** -** <blockquote><pre> -** char *zText = "It's a happy day!"; -** </pre></blockquote> -** -** One can use this text in an SQL statement as follows: -** -** <blockquote><pre> -** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES('%q')", zText); -** sqlite3_exec(db, zSQL, 0, 0, 0); -** sqlite3_free(zSQL); -** </pre></blockquote> -** -** Because the %q format string is used, the '\'' character in zText -** is escaped and the SQL generated is as follows: -** -** <blockquote><pre> -** INSERT INTO table1 VALUES('It''s a happy day!') -** </pre></blockquote> -** -** This is correct. Had we used %s instead of %q, the generated SQL -** would have looked like this: -** -** <blockquote><pre> -** INSERT INTO table1 VALUES('It's a happy day!'); -** </pre></blockquote> -** -** This second example is an SQL syntax error. As a general rule you should -** always use %q instead of %s when inserting text into a string literal. -** -** ^(The %Q option works like %q except it also adds single quotes around -** the outside of the total string. Additionally, if the parameter in the -** argument list is a NULL pointer, %Q substitutes the text "NULL" (without -** single quotes).)^ So, for example, one could say: -** -** <blockquote><pre> -** char *zSQL = sqlite3_mprintf("INSERT INTO table VALUES(%Q)", zText); -** sqlite3_exec(db, zSQL, 0, 0, 0); -** sqlite3_free(zSQL); -** </pre></blockquote> -** -** The code above will render a correct SQL statement in the zSQL -** variable even if the zText variable is a NULL pointer. -** -** ^(The "%w" formatting option is like "%q" except that it expects to -** be contained within double-quotes instead of single quotes, and it -** escapes the double-quote character instead of the single-quote -** character.)^ The "%w" formatting option is intended for safely inserting -** table and column names into a constructed SQL statement. -** -** ^(The "%z" formatting option works like "%s" but with the -** addition that after the string has been read and copied into -** the result, [sqlite3_free()] is called on the input string.)^ +** See also: [built-in printf()], [printf() SQL function] */ SQLITE_API char *sqlite3_mprintf(const char*,...); SQLITE_API char *sqlite3_vmprintf(const char*, va_list); @@ -2934,12 +3762,14 @@ SQLITE_API void sqlite3_randomness(int N, void *P); /* ** CAPI3REF: Compile-Time Authorization Callbacks ** METHOD: sqlite3 +** KEYWORDS: {authorizer callback} ** ** ^This routine registers an authorizer callback with a particular ** [database connection], supplied in the first argument. ** ^The authorizer callback is invoked as SQL statements are being compiled ** by [sqlite3_prepare()] or its variants [sqlite3_prepare_v2()], -** [sqlite3_prepare16()] and [sqlite3_prepare16_v2()]. ^At various +** [sqlite3_prepare_v3()], [sqlite3_prepare16()], [sqlite3_prepare16_v2()], +** and [sqlite3_prepare16_v3()]. ^At various ** points during the compilation process, as logic is being created ** to perform various actions, the authorizer callback is invoked to ** see if those actions are allowed. ^The authorizer callback should @@ -2961,8 +3791,10 @@ SQLITE_API void sqlite3_randomness(int N, void *P); ** parameter to the sqlite3_set_authorizer() interface. ^The second parameter ** to the callback is an integer [SQLITE_COPY | action code] that specifies ** the particular action to be authorized. ^The third through sixth parameters -** to the callback are zero-terminated strings that contain additional -** details about the action to be authorized. +** to the callback are either NULL pointers or zero-terminated strings +** that contain additional details about the action to be authorized. +** Applications must always be prepared to encounter a NULL pointer in any +** of the third through the sixth parameters of the authorization callback. ** ** ^If the action code is [SQLITE_READ] ** and the callback returns [SQLITE_IGNORE] then the @@ -2971,6 +3803,10 @@ SQLITE_API void sqlite3_randomness(int N, void *P); ** been read if [SQLITE_OK] had been returned. The [SQLITE_IGNORE] ** return can be used to deny an untrusted user access to individual ** columns of a table. +** ^When a table is referenced by a [SELECT] but no column values are +** extracted from that table (for example in a query like +** "SELECT count(*) FROM tab") then the [SQLITE_READ] authorizer callback +** is invoked once for that table with a column name that is an empty string. ** ^If the action code is [SQLITE_DELETE] and the callback returns ** [SQLITE_IGNORE] then the [DELETE] operation proceeds but the ** [truncate optimization] is disabled and all rows are deleted individually. @@ -3130,8 +3966,8 @@ SQLITE_API SQLITE_DEPRECATED void *sqlite3_profile(sqlite3*, ** KEYWORDS: SQLITE_TRACE ** ** These constants identify classes of events that can be monitored -** using the [sqlite3_trace_v2()] tracing logic. The third argument -** to [sqlite3_trace_v2()] is an OR-ed combination of one or more of +** using the [sqlite3_trace_v2()] tracing logic. The M argument +** to [sqlite3_trace_v2(D,M,X,P)] is an OR-ed combination of one or more of ** the following constants. ^The first argument to the trace callback ** is one of the following constants. ** @@ -3340,10 +4176,10 @@ SQLITE_API void sqlite3_progress_handler(sqlite3*, int, int(*)(void*), void*); ** ^If [URI filename] interpretation is enabled, and the filename argument ** begins with "file:", then the filename is interpreted as a URI. ^URI ** filename interpretation is enabled if the [SQLITE_OPEN_URI] flag is -** set in the fourth argument to sqlite3_open_v2(), or if it has +** set in the third argument to sqlite3_open_v2(), or if it has ** been enabled globally using the [SQLITE_CONFIG_URI] option with the ** [sqlite3_config()] method or by the [SQLITE_USE_URI] compile-time option. -** As of SQLite version 3.7.7, URI filename interpretation is turned off +** URI filename interpretation is turned off ** by default, but future releases of SQLite might enable URI filename ** interpretation by default. See "[URI filenames]" for additional ** information. @@ -3682,9 +4518,9 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** ** [[SQLITE_LIMIT_VDBE_OP]] ^(<dt>SQLITE_LIMIT_VDBE_OP</dt> ** <dd>The maximum number of instructions in a virtual machine program -** used to implement an SQL statement. This limit is not currently -** enforced, though that might be added in some future release of -** SQLite.</dd>)^ +** used to implement an SQL statement. If [sqlite3_prepare_v2()] or +** the equivalent tries to allocate space for more than this many opcodes +** in a single prepared statement, an SQLITE_NOMEM error is returned.</dd>)^ ** ** [[SQLITE_LIMIT_FUNCTION_ARG]] ^(<dt>SQLITE_LIMIT_FUNCTION_ARG</dt> ** <dd>The maximum number of arguments on a function.</dd>)^ @@ -3723,22 +4559,58 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); #define SQLITE_LIMIT_WORKER_THREADS 11 /* +** CAPI3REF: Prepare Flags +** +** These constants define various flags that can be passed into +** "prepFlags" parameter of the [sqlite3_prepare_v3()] and +** [sqlite3_prepare16_v3()] interfaces. +** +** New flags may be added in future releases of SQLite. +** +** <dl> +** [[SQLITE_PREPARE_PERSISTENT]] ^(<dt>SQLITE_PREPARE_PERSISTENT</dt> +** <dd>The SQLITE_PREPARE_PERSISTENT flag is a hint to the query planner +** that the prepared statement will be retained for a long time and +** probably reused many times.)^ ^Without this flag, [sqlite3_prepare_v3()] +** and [sqlite3_prepare16_v3()] assume that the prepared statement will +** be used just once or at most a few times and then destroyed using +** [sqlite3_finalize()] relatively soon. The current implementation acts +** on this hint by avoiding the use of [lookaside memory] so as not to +** deplete the limited store of lookaside memory. Future versions of +** SQLite may act on this hint differently. +** </dl> +*/ +#define SQLITE_PREPARE_PERSISTENT 0x01 + +/* ** CAPI3REF: Compiling An SQL Statement ** KEYWORDS: {SQL statement compiler} ** METHOD: sqlite3 ** CONSTRUCTOR: sqlite3_stmt ** -** To execute an SQL query, it must first be compiled into a byte-code -** program using one of these routines. +** To execute an SQL statement, it must first be compiled into a byte-code +** program using one of these routines. Or, in other words, these routines +** are constructors for the [prepared statement] object. +** +** The preferred routine to use is [sqlite3_prepare_v2()]. The +** [sqlite3_prepare()] interface is legacy and should be avoided. +** [sqlite3_prepare_v3()] has an extra "prepFlags" option that is used +** for special purposes. +** +** The use of the UTF-8 interfaces is preferred, as SQLite currently +** does all parsing using UTF-8. The UTF-16 interfaces are provided +** as a convenience. The UTF-16 interfaces work by converting the +** input text into UTF-8, then invoking the corresponding UTF-8 interface. ** ** The first argument, "db", is a [database connection] obtained from a ** prior successful call to [sqlite3_open()], [sqlite3_open_v2()] or ** [sqlite3_open16()]. The database connection must not have been closed. ** ** The second argument, "zSql", is the statement to be compiled, encoded -** as either UTF-8 or UTF-16. The sqlite3_prepare() and sqlite3_prepare_v2() -** interfaces use UTF-8, and sqlite3_prepare16() and sqlite3_prepare16_v2() -** use UTF-16. +** as either UTF-8 or UTF-16. The sqlite3_prepare(), sqlite3_prepare_v2(), +** and sqlite3_prepare_v3() +** interfaces use UTF-8, and sqlite3_prepare16(), sqlite3_prepare16_v2(), +** and sqlite3_prepare16_v3() use UTF-16. ** ** ^If the nByte argument is negative, then zSql is read up to the ** first zero terminator. ^If nByte is positive, then it is the @@ -3765,10 +4637,11 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** ^On success, the sqlite3_prepare() family of routines return [SQLITE_OK]; ** otherwise an [error code] is returned. ** -** The sqlite3_prepare_v2() and sqlite3_prepare16_v2() interfaces are -** recommended for all new programs. The two older interfaces are retained -** for backwards compatibility, but their use is discouraged. -** ^In the "v2" interfaces, the prepared statement +** The sqlite3_prepare_v2(), sqlite3_prepare_v3(), sqlite3_prepare16_v2(), +** and sqlite3_prepare16_v3() interfaces are recommended for all new programs. +** The older interfaces (sqlite3_prepare() and sqlite3_prepare16()) +** are retained for backwards compatibility, but their use is discouraged. +** ^In the "vX" interfaces, the prepared statement ** that is returned (the [sqlite3_stmt] object) contains a copy of the ** original SQL text. This causes the [sqlite3_step()] interface to ** behave differently in three ways: @@ -3802,6 +4675,12 @@ SQLITE_API int sqlite3_limit(sqlite3*, int id, int newVal); ** and the [SQLITE_ENABLE_STAT3] compile-time option is enabled. ** </li> ** </ol> +** +** <p>^sqlite3_prepare_v3() differs from sqlite3_prepare_v2() only in having +** the extra prepFlags parameter, which is a bit array consisting of zero or +** more of the [SQLITE_PREPARE_PERSISTENT|SQLITE_PREPARE_*] flags. ^The +** sqlite3_prepare_v2() interface works exactly the same as +** sqlite3_prepare_v3() with a zero prepFlags parameter. */ SQLITE_API int sqlite3_prepare( sqlite3 *db, /* Database handle */ @@ -3817,6 +4696,14 @@ SQLITE_API int sqlite3_prepare_v2( sqlite3_stmt **ppStmt, /* OUT: Statement handle */ const char **pzTail /* OUT: Pointer to unused portion of zSql */ ); +SQLITE_API int sqlite3_prepare_v3( + sqlite3 *db, /* Database handle */ + const char *zSql, /* SQL statement, UTF-8 encoded */ + int nByte, /* Maximum length of zSql in bytes. */ + unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */ + sqlite3_stmt **ppStmt, /* OUT: Statement handle */ + const char **pzTail /* OUT: Pointer to unused portion of zSql */ +); SQLITE_API int sqlite3_prepare16( sqlite3 *db, /* Database handle */ const void *zSql, /* SQL statement, UTF-16 encoded */ @@ -3831,6 +4718,14 @@ SQLITE_API int sqlite3_prepare16_v2( sqlite3_stmt **ppStmt, /* OUT: Statement handle */ const void **pzTail /* OUT: Pointer to unused portion of zSql */ ); +SQLITE_API int sqlite3_prepare16_v3( + sqlite3 *db, /* Database handle */ + const void *zSql, /* SQL statement, UTF-16 encoded */ + int nByte, /* Maximum length of zSql in bytes. */ + unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_ flags */ + sqlite3_stmt **ppStmt, /* OUT: Statement handle */ + const void **pzTail /* OUT: Pointer to unused portion of zSql */ +); /* ** CAPI3REF: Retrieving Statement SQL @@ -3838,7 +4733,8 @@ SQLITE_API int sqlite3_prepare16_v2( ** ** ^The sqlite3_sql(P) interface returns a pointer to a copy of the UTF-8 ** SQL text used to create [prepared statement] P if P was -** created by either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()]. +** created by [sqlite3_prepare_v2()], [sqlite3_prepare_v3()], +** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()]. ** ^The sqlite3_expanded_sql(P) interface returns a pointer to a UTF-8 ** string containing the SQL text of prepared statement P with ** [bound parameters] expanded. @@ -3957,12 +4853,13 @@ SQLITE_API int sqlite3_stmt_busy(sqlite3_stmt*); ** implementation of [application-defined SQL functions] are protected. ** ^The sqlite3_value object returned by ** [sqlite3_column_value()] is unprotected. -** Unprotected sqlite3_value objects may only be used with -** [sqlite3_result_value()] and [sqlite3_bind_value()]. +** Unprotected sqlite3_value objects may only be used as arguments +** to [sqlite3_result_value()], [sqlite3_bind_value()], and +** [sqlite3_value_dup()]. ** The [sqlite3_value_blob | sqlite3_value_type()] family of ** interfaces require protected sqlite3_value objects. */ -typedef struct Mem sqlite3_value; +typedef struct sqlite3_value sqlite3_value; /* ** CAPI3REF: SQL Function Context Object @@ -4064,6 +4961,15 @@ typedef struct sqlite3_context sqlite3_context; ** [sqlite3_blob_open | incremental BLOB I/O] routines. ** ^A negative value for the zeroblob results in a zero-length BLOB. ** +** ^The sqlite3_bind_pointer(S,I,P,T,D) routine causes the I-th parameter in +** [prepared statement] S to have an SQL value of NULL, but to also be +** associated with the pointer P of type T. ^D is either a NULL pointer or +** a pointer to a destructor function for P. ^SQLite will invoke the +** destructor D with a single argument of P when it is finished using +** P. The T parameter should be a static string, preferably a string +** literal. The sqlite3_bind_pointer() routine is part of the +** [pointer passing interface] added for SQLite 3.20.0. +** ** ^If any of the sqlite3_bind_*() routines are called with a NULL pointer ** for the [prepared statement] or with a prepared statement for which ** [sqlite3_step()] has been called more recently than [sqlite3_reset()], @@ -4097,6 +5003,7 @@ SQLITE_API int sqlite3_bind_text16(sqlite3_stmt*, int, const void*, int, void(*) SQLITE_API int sqlite3_bind_text64(sqlite3_stmt*, int, const char*, sqlite3_uint64, void(*)(void*), unsigned char encoding); SQLITE_API int sqlite3_bind_value(sqlite3_stmt*, int, const sqlite3_value*); +SQLITE_API int sqlite3_bind_pointer(sqlite3_stmt*, int, void*, const char*,void(*)(void*)); SQLITE_API int sqlite3_bind_zeroblob(sqlite3_stmt*, int, int n); SQLITE_API int sqlite3_bind_zeroblob64(sqlite3_stmt*, int, sqlite3_uint64); @@ -4140,8 +5047,8 @@ SQLITE_API int sqlite3_bind_parameter_count(sqlite3_stmt*); ** ^If the value N is out of range or if the N-th parameter is ** nameless, then NULL is returned. ^The returned string is ** always in UTF-8 encoding even if the named parameter was -** originally specified as UTF-16 in [sqlite3_prepare16()] or -** [sqlite3_prepare16_v2()]. +** originally specified as UTF-16 in [sqlite3_prepare16()], +** [sqlite3_prepare16_v2()], or [sqlite3_prepare16_v3()]. ** ** See also: [sqlite3_bind_blob|sqlite3_bind()], ** [sqlite3_bind_parameter_count()], and @@ -4158,7 +5065,8 @@ SQLITE_API const char *sqlite3_bind_parameter_name(sqlite3_stmt*, int); ** parameter to [sqlite3_bind_blob|sqlite3_bind()]. ^A zero ** is returned if no matching parameter is found. ^The parameter ** name must be given in UTF-8 even if the original statement -** was prepared from UTF-16 text using [sqlite3_prepare16_v2()]. +** was prepared from UTF-16 text using [sqlite3_prepare16_v2()] or +** [sqlite3_prepare16_v3()]. ** ** See also: [sqlite3_bind_blob|sqlite3_bind()], ** [sqlite3_bind_parameter_count()], and @@ -4312,16 +5220,18 @@ SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int); ** CAPI3REF: Evaluate An SQL Statement ** METHOD: sqlite3_stmt ** -** After a [prepared statement] has been prepared using either -** [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] or one of the legacy +** After a [prepared statement] has been prepared using any of +** [sqlite3_prepare_v2()], [sqlite3_prepare_v3()], [sqlite3_prepare16_v2()], +** or [sqlite3_prepare16_v3()] or one of the legacy ** interfaces [sqlite3_prepare()] or [sqlite3_prepare16()], this function ** must be called one or more times to evaluate the statement. ** ** The details of the behavior of the sqlite3_step() interface depend -** on whether the statement was prepared using the newer "v2" interface -** [sqlite3_prepare_v2()] and [sqlite3_prepare16_v2()] or the older legacy -** interface [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the -** new "v2" interface is recommended for new applications but the legacy +** on whether the statement was prepared using the newer "vX" interfaces +** [sqlite3_prepare_v3()], [sqlite3_prepare_v2()], [sqlite3_prepare16_v3()], +** [sqlite3_prepare16_v2()] or the older legacy +** interfaces [sqlite3_prepare()] and [sqlite3_prepare16()]. The use of the +** new "vX" interface is recommended for new applications but the legacy ** interface will continue to be supported. ** ** ^In the legacy interface, the return value will be either [SQLITE_BUSY], @@ -4382,10 +5292,11 @@ SQLITE_API const void *sqlite3_column_decltype16(sqlite3_stmt*,int); ** specific [error codes] that better describes the error. ** We admit that this is a goofy design. The problem has been fixed ** with the "v2" interface. If you prepare all of your SQL statements -** using either [sqlite3_prepare_v2()] or [sqlite3_prepare16_v2()] instead +** using [sqlite3_prepare_v3()] or [sqlite3_prepare_v2()] +** or [sqlite3_prepare16_v2()] or [sqlite3_prepare16_v3()] instead ** of the legacy [sqlite3_prepare()] and [sqlite3_prepare16()] interfaces, ** then the more specific [error codes] are returned directly -** by sqlite3_step(). The use of the "v2" interface is recommended. +** by sqlite3_step(). The use of the "vX" interfaces is recommended. */ SQLITE_API int sqlite3_step(sqlite3_stmt*); @@ -4447,6 +5358,28 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** KEYWORDS: {column access functions} ** METHOD: sqlite3_stmt ** +** <b>Summary:</b> +** <blockquote><table border=0 cellpadding=0 cellspacing=0> +** <tr><td><b>sqlite3_column_blob</b><td>→<td>BLOB result +** <tr><td><b>sqlite3_column_double</b><td>→<td>REAL result +** <tr><td><b>sqlite3_column_int</b><td>→<td>32-bit INTEGER result +** <tr><td><b>sqlite3_column_int64</b><td>→<td>64-bit INTEGER result +** <tr><td><b>sqlite3_column_text</b><td>→<td>UTF-8 TEXT result +** <tr><td><b>sqlite3_column_text16</b><td>→<td>UTF-16 TEXT result +** <tr><td><b>sqlite3_column_value</b><td>→<td>The result as an +** [sqlite3_value|unprotected sqlite3_value] object. +** <tr><td> <td> <td> +** <tr><td><b>sqlite3_column_bytes</b><td>→<td>Size of a BLOB +** or a UTF-8 TEXT result in bytes +** <tr><td><b>sqlite3_column_bytes16 </b> +** <td>→ <td>Size of UTF-16 +** TEXT in bytes +** <tr><td><b>sqlite3_column_type</b><td>→<td>Default +** datatype of the result +** </table></blockquote> +** +** <b>Details:</b> +** ** ^These routines return information about a single column of the current ** result row of a query. ^In every case the first argument is a pointer ** to the [prepared statement] that is being evaluated (the [sqlite3_stmt*] @@ -4468,16 +5401,29 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** are called from a different thread while any of these routines ** are pending, then the results are undefined. ** +** The first six interfaces (_blob, _double, _int, _int64, _text, and _text16) +** each return the value of a result column in a specific data format. If +** the result column is not initially in the requested format (for example, +** if the query returns an integer but the sqlite3_column_text() interface +** is used to extract the value) then an automatic type conversion is performed. +** ** ^The sqlite3_column_type() routine returns the ** [SQLITE_INTEGER | datatype code] for the initial data type ** of the result column. ^The returned value is one of [SQLITE_INTEGER], -** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. The value -** returned by sqlite3_column_type() is only meaningful if no type -** conversions have occurred as described below. After a type conversion, -** the value returned by sqlite3_column_type() is undefined. Future +** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL]. +** The return value of sqlite3_column_type() can be used to decide which +** of the first six interface should be used to extract the column value. +** The value returned by sqlite3_column_type() is only meaningful if no +** automatic type conversions have occurred for the value in question. +** After a type conversion, the result of calling sqlite3_column_type() +** is undefined, though harmless. Future ** versions of SQLite may change the behavior of sqlite3_column_type() ** following a type conversion. ** +** If the result is a BLOB or a TEXT string, then the sqlite3_column_bytes() +** or sqlite3_column_bytes16() interfaces can be used to determine the size +** of that BLOB or string. +** ** ^If the result is a BLOB or UTF-8 string then the sqlite3_column_bytes() ** routine returns the number of bytes in that BLOB or string. ** ^If the result is a UTF-16 string, then sqlite3_column_bytes() converts @@ -4514,9 +5460,13 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** [sqlite3_column_value()] is used in any other way, including calls ** to routines like [sqlite3_value_int()], [sqlite3_value_text()], ** or [sqlite3_value_bytes()], the behavior is not threadsafe. +** Hence, the sqlite3_column_value() interface +** is normally only useful within the implementation of +** [application-defined SQL functions] or [virtual tables], not within +** top-level application code. ** -** These routines attempt to convert the value where appropriate. ^For -** example, if the internal representation is FLOAT and a text result +** The these routines may attempt to convert the datatype of the result. +** ^For example, if the internal representation is FLOAT and a text result ** is requested, [sqlite3_snprintf()] is used internally to perform the ** conversion automatically. ^(The following table details the conversions ** that are applied: @@ -4588,7 +5538,7 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** ^The pointers returned are valid until a type conversion occurs as ** described above, or until [sqlite3_step()] or [sqlite3_reset()] or ** [sqlite3_finalize()] is called. ^The memory space used to hold strings -** and BLOBs is freed automatically. Do <em>not</em> pass the pointers returned +** and BLOBs is freed automatically. Do not pass the pointers returned ** from [sqlite3_column_blob()], [sqlite3_column_text()], etc. into ** [sqlite3_free()]. ** @@ -4599,15 +5549,15 @@ SQLITE_API int sqlite3_data_count(sqlite3_stmt *pStmt); ** [SQLITE_NOMEM].)^ */ SQLITE_API const void *sqlite3_column_blob(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol); SQLITE_API double sqlite3_column_double(sqlite3_stmt*, int iCol); SQLITE_API int sqlite3_column_int(sqlite3_stmt*, int iCol); SQLITE_API sqlite3_int64 sqlite3_column_int64(sqlite3_stmt*, int iCol); SQLITE_API const unsigned char *sqlite3_column_text(sqlite3_stmt*, int iCol); SQLITE_API const void *sqlite3_column_text16(sqlite3_stmt*, int iCol); -SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol); SQLITE_API sqlite3_value *sqlite3_column_value(sqlite3_stmt*, int iCol); +SQLITE_API int sqlite3_column_bytes(sqlite3_stmt*, int iCol); +SQLITE_API int sqlite3_column_bytes16(sqlite3_stmt*, int iCol); +SQLITE_API int sqlite3_column_type(sqlite3_stmt*, int iCol); /* ** CAPI3REF: Destroy A Prepared Statement Object @@ -4841,21 +5791,43 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6 ** CAPI3REF: Obtaining SQL Values ** METHOD: sqlite3_value ** -** The C-language implementation of SQL functions and aggregates uses -** this set of interface routines to access the parameter values on -** the function or aggregate. -** -** The xFunc (for scalar functions) or xStep (for aggregates) parameters -** to [sqlite3_create_function()] and [sqlite3_create_function16()] -** define callbacks that implement the SQL functions and aggregates. -** The 3rd parameter to these callbacks is an array of pointers to -** [protected sqlite3_value] objects. There is one [sqlite3_value] object for -** each parameter to the SQL function. These routines are used to -** extract values from the [sqlite3_value] objects. +** <b>Summary:</b> +** <blockquote><table border=0 cellpadding=0 cellspacing=0> +** <tr><td><b>sqlite3_value_blob</b><td>→<td>BLOB value +** <tr><td><b>sqlite3_value_double</b><td>→<td>REAL value +** <tr><td><b>sqlite3_value_int</b><td>→<td>32-bit INTEGER value +** <tr><td><b>sqlite3_value_int64</b><td>→<td>64-bit INTEGER value +** <tr><td><b>sqlite3_value_pointer</b><td>→<td>Pointer value +** <tr><td><b>sqlite3_value_text</b><td>→<td>UTF-8 TEXT value +** <tr><td><b>sqlite3_value_text16</b><td>→<td>UTF-16 TEXT value in +** the native byteorder +** <tr><td><b>sqlite3_value_text16be</b><td>→<td>UTF-16be TEXT value +** <tr><td><b>sqlite3_value_text16le</b><td>→<td>UTF-16le TEXT value +** <tr><td> <td> <td> +** <tr><td><b>sqlite3_value_bytes</b><td>→<td>Size of a BLOB +** or a UTF-8 TEXT in bytes +** <tr><td><b>sqlite3_value_bytes16 </b> +** <td>→ <td>Size of UTF-16 +** TEXT in bytes +** <tr><td><b>sqlite3_value_type</b><td>→<td>Default +** datatype of the value +** <tr><td><b>sqlite3_value_numeric_type </b> +** <td>→ <td>Best numeric datatype of the value +** <tr><td><b>sqlite3_value_nochange </b> +** <td>→ <td>True if the column is unchanged in an UPDATE +** against a virtual table. +** </table></blockquote> +** +** <b>Details:</b> +** +** These routines extract type, size, and content information from +** [protected sqlite3_value] objects. Protected sqlite3_value objects +** are used to pass parameter information into implementation of +** [application-defined SQL functions] and [virtual tables]. ** ** These routines work only with [protected sqlite3_value] objects. ** Any attempt to use these routines on an [unprotected sqlite3_value] -** object results in undefined behavior. +** is not threadsafe. ** ** ^These routines work just like the corresponding [column access functions] ** except that these routines take a single [protected sqlite3_value] object @@ -4866,6 +5838,24 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6 ** sqlite3_value_text16be() and sqlite3_value_text16le() interfaces ** extract UTF-16 strings as big-endian and little-endian respectively. ** +** ^If [sqlite3_value] object V was initialized +** using [sqlite3_bind_pointer(S,I,P,X,D)] or [sqlite3_result_pointer(C,P,X,D)] +** and if X and Y are strings that compare equal according to strcmp(X,Y), +** then sqlite3_value_pointer(V,Y) will return the pointer P. ^Otherwise, +** sqlite3_value_pointer(V,Y) returns a NULL. The sqlite3_bind_pointer() +** routine is part of the [pointer passing interface] added for SQLite 3.20.0. +** +** ^(The sqlite3_value_type(V) interface returns the +** [SQLITE_INTEGER | datatype code] for the initial datatype of the +** [sqlite3_value] object V. The returned value is one of [SQLITE_INTEGER], +** [SQLITE_FLOAT], [SQLITE_TEXT], [SQLITE_BLOB], or [SQLITE_NULL].)^ +** Other interfaces might change the datatype for an sqlite3_value object. +** For example, if the datatype is initially SQLITE_INTEGER and +** sqlite3_value_text(V) is called to extract a text value for that +** integer, then subsequent calls to sqlite3_value_type(V) might return +** SQLITE_TEXT. Whether or not a persistent internal datatype conversion +** occurs is undefined and may change from one release of SQLite to the next. +** ** ^(The sqlite3_value_numeric_type() interface attempts to apply ** numeric affinity to the value. This means that an attempt is ** made to convert the value to an integer or floating point. If @@ -4874,6 +5864,19 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6 ** then the conversion is performed. Otherwise no conversion occurs. ** The [SQLITE_INTEGER | datatype] after conversion is returned.)^ ** +** ^Within the [xUpdate] method of a [virtual table], the +** sqlite3_value_nochange(X) interface returns true if and only if +** the column corresponding to X is unchanged by the UPDATE operation +** that the xUpdate method call was invoked to implement and if +** and the prior [xColumn] method call that was invoked to extracted +** the value for that column returned without setting a result (probably +** because it queried [sqlite3_vtab_nochange()] and found that the column +** was unchanging). ^Within an [xUpdate] method, any value for which +** sqlite3_value_nochange(X) is true will in all other respects appear +** to be a NULL value. If sqlite3_value_nochange(X) is invoked anywhere other +** than within an [xUpdate] method call for an UPDATE statement, then +** the return value is arbitrary and meaningless. +** ** Please pay particular attention to the fact that the pointer returned ** from [sqlite3_value_blob()], [sqlite3_value_text()], or ** [sqlite3_value_text16()] can be invalidated by a subsequent call to @@ -4884,17 +5887,19 @@ SQLITE_API SQLITE_DEPRECATED int sqlite3_memory_alarm(void(*)(void*,sqlite3_int6 ** the SQL function that supplied the [sqlite3_value*] parameters. */ SQLITE_API const void *sqlite3_value_blob(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes(sqlite3_value*); -SQLITE_API int sqlite3_value_bytes16(sqlite3_value*); SQLITE_API double sqlite3_value_double(sqlite3_value*); SQLITE_API int sqlite3_value_int(sqlite3_value*); SQLITE_API sqlite3_int64 sqlite3_value_int64(sqlite3_value*); +SQLITE_API void *sqlite3_value_pointer(sqlite3_value*, const char*); SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value*); SQLITE_API const void *sqlite3_value_text16(sqlite3_value*); SQLITE_API const void *sqlite3_value_text16le(sqlite3_value*); SQLITE_API const void *sqlite3_value_text16be(sqlite3_value*); +SQLITE_API int sqlite3_value_bytes(sqlite3_value*); +SQLITE_API int sqlite3_value_bytes16(sqlite3_value*); SQLITE_API int sqlite3_value_type(sqlite3_value*); SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); +SQLITE_API int sqlite3_value_nochange(sqlite3_value*); /* ** CAPI3REF: Finding The Subtype Of SQL Values @@ -4905,10 +5910,6 @@ SQLITE_API int sqlite3_value_numeric_type(sqlite3_value*); ** information can be used to pass a limited amount of context from ** one SQL function to another. Use the [sqlite3_result_subtype()] ** routine to set the subtype for the return value of an SQL function. -** -** SQLite makes no use of subtype itself. It merely passes the subtype -** from the result of one [application-defined SQL function] into the -** input of another. */ SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value*); @@ -5016,10 +6017,11 @@ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*); ** the compiled regular expression can be reused on multiple ** invocations of the same function. ** -** ^The sqlite3_get_auxdata() interface returns a pointer to the metadata -** associated by the sqlite3_set_auxdata() function with the Nth argument -** value to the application-defined function. ^If there is no metadata -** associated with the function argument, this sqlite3_get_auxdata() interface +** ^The sqlite3_get_auxdata(C,N) interface returns a pointer to the metadata +** associated by the sqlite3_set_auxdata(C,N,P,X) function with the Nth argument +** value to the application-defined function. ^N is zero for the left-most +** function argument. ^If there is no metadata +** associated with the function argument, the sqlite3_get_auxdata(C,N) interface ** returns a NULL pointer. ** ** ^The sqlite3_set_auxdata(C,N,P,X) interface saves P as metadata for the N-th @@ -5050,6 +6052,10 @@ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context*); ** function parameters that are compile-time constants, including literal ** values and [parameters] and expressions composed from the same.)^ ** +** The value of the N parameter to these interfaces should be non-negative. +** Future enhancements may make use of negative N values to define new +** kinds of function caching behavior. +** ** These routines must be called from the same thread in which ** the SQL function is running. */ @@ -5173,7 +6179,7 @@ typedef void (*sqlite3_destructor_type)(void*); ** when it has finished using that result. ** ^If the 4th parameter to the sqlite3_result_text* interfaces ** or sqlite3_result_blob is the special constant SQLITE_TRANSIENT -** then SQLite makes a copy of the result into space obtained from +** then SQLite makes a copy of the result into space obtained ** from [sqlite3_malloc()] before it returns. ** ** ^The sqlite3_result_value() interface sets the result of @@ -5186,6 +6192,17 @@ typedef void (*sqlite3_destructor_type)(void*); ** [unprotected sqlite3_value] object is required, so either ** kind of [sqlite3_value] object can be used with this interface. ** +** ^The sqlite3_result_pointer(C,P,T,D) interface sets the result to an +** SQL NULL value, just like [sqlite3_result_null(C)], except that it +** also associates the host-language pointer P or type T with that +** NULL value such that the pointer can be retrieved within an +** [application-defined SQL function] using [sqlite3_value_pointer()]. +** ^If the D parameter is not NULL, then it is a pointer to a destructor +** for the P parameter. ^SQLite invokes D with P as its only argument +** when SQLite is finished with P. The T parameter should be a static +** string and preferably a string literal. The sqlite3_result_pointer() +** routine is part of the [pointer passing interface] added for SQLite 3.20.0. +** ** If these routines are called from within the different thread ** than the one containing the application-defined function that received ** the [sqlite3_context] pointer, the results are undefined. @@ -5209,6 +6226,7 @@ SQLITE_API void sqlite3_result_text16(sqlite3_context*, const void*, int, void(* SQLITE_API void sqlite3_result_text16le(sqlite3_context*, const void*, int,void(*)(void*)); SQLITE_API void sqlite3_result_text16be(sqlite3_context*, const void*, int,void(*)(void*)); SQLITE_API void sqlite3_result_value(sqlite3_context*, sqlite3_value*); +SQLITE_API void sqlite3_result_pointer(sqlite3_context*, void*,const char*,void(*)(void*)); SQLITE_API void sqlite3_result_zeroblob(sqlite3_context*, int n); SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context*, sqlite3_uint64 n); @@ -5538,6 +6556,41 @@ SQLITE_API char *sqlite3_temp_directory; SQLITE_API char *sqlite3_data_directory; /* +** CAPI3REF: Win32 Specific Interface +** +** These interfaces are available only on Windows. The +** [sqlite3_win32_set_directory] interface is used to set the value associated +** with the [sqlite3_temp_directory] or [sqlite3_data_directory] variable, to +** zValue, depending on the value of the type parameter. The zValue parameter +** should be NULL to cause the previous value to be freed via [sqlite3_free]; +** a non-NULL value will be copied into memory obtained from [sqlite3_malloc] +** prior to being used. The [sqlite3_win32_set_directory] interface returns +** [SQLITE_OK] to indicate success, [SQLITE_ERROR] if the type is unsupported, +** or [SQLITE_NOMEM] if memory could not be allocated. The value of the +** [sqlite3_data_directory] variable is intended to act as a replacement for +** the current directory on the sub-platforms of Win32 where that concept is +** not present, e.g. WinRT and UWP. The [sqlite3_win32_set_directory8] and +** [sqlite3_win32_set_directory16] interfaces behave exactly the same as the +** sqlite3_win32_set_directory interface except the string parameter must be +** UTF-8 or UTF-16, respectively. +*/ +SQLITE_API int sqlite3_win32_set_directory( + unsigned long type, /* Identifier for directory being set or reset */ + void *zValue /* New value for directory being set or reset */ +); +SQLITE_API int sqlite3_win32_set_directory8(unsigned long type, const char *zValue); +SQLITE_API int sqlite3_win32_set_directory16(unsigned long type, const void *zValue); + +/* +** CAPI3REF: Win32 Directory Types +** +** These macros are only available on Windows. They define the allowed values +** for the type argument to the [sqlite3_win32_set_directory] interface. +*/ +#define SQLITE_WIN32_DATA_DIRECTORY_TYPE 1 +#define SQLITE_WIN32_TEMP_DIRECTORY_TYPE 2 + +/* ** CAPI3REF: Test For Auto-Commit Mode ** KEYWORDS: {autocommit mode} ** METHOD: sqlite3 @@ -5868,7 +6921,9 @@ SQLITE_API SQLITE_DEPRECATED void sqlite3_soft_heap_limit(int N); ** ^If the column-name parameter to sqlite3_table_column_metadata() is a ** NULL pointer, then this routine simply checks for the existence of the ** table and returns SQLITE_OK if the table exists and SQLITE_ERROR if it -** does not. +** does not. If the table name parameter T in a call to +** sqlite3_table_column_metadata(X,D,T,C,...) is NULL then the result is +** undefined behavior. ** ** ^The column is identified by the second, third and fourth parameters to ** this function. ^(The second parameter is either the name of the database @@ -6267,6 +7322,10 @@ struct sqlite3_index_info { /* ** CAPI3REF: Virtual Table Scan Flags +** +** Virtual table implementations are allowed to set the +** [sqlite3_index_info].idxFlags field to some combination of +** these bits. */ #define SQLITE_INDEX_SCAN_UNIQUE 1 /* Scan visits at most 1 row */ @@ -6278,15 +7337,20 @@ struct sqlite3_index_info { ** an operator that is part of a constraint term in the wHERE clause of ** a query that uses a [virtual table]. */ -#define SQLITE_INDEX_CONSTRAINT_EQ 2 -#define SQLITE_INDEX_CONSTRAINT_GT 4 -#define SQLITE_INDEX_CONSTRAINT_LE 8 -#define SQLITE_INDEX_CONSTRAINT_LT 16 -#define SQLITE_INDEX_CONSTRAINT_GE 32 -#define SQLITE_INDEX_CONSTRAINT_MATCH 64 -#define SQLITE_INDEX_CONSTRAINT_LIKE 65 -#define SQLITE_INDEX_CONSTRAINT_GLOB 66 -#define SQLITE_INDEX_CONSTRAINT_REGEXP 67 +#define SQLITE_INDEX_CONSTRAINT_EQ 2 +#define SQLITE_INDEX_CONSTRAINT_GT 4 +#define SQLITE_INDEX_CONSTRAINT_LE 8 +#define SQLITE_INDEX_CONSTRAINT_LT 16 +#define SQLITE_INDEX_CONSTRAINT_GE 32 +#define SQLITE_INDEX_CONSTRAINT_MATCH 64 +#define SQLITE_INDEX_CONSTRAINT_LIKE 65 +#define SQLITE_INDEX_CONSTRAINT_GLOB 66 +#define SQLITE_INDEX_CONSTRAINT_REGEXP 67 +#define SQLITE_INDEX_CONSTRAINT_NE 68 +#define SQLITE_INDEX_CONSTRAINT_ISNOT 69 +#define SQLITE_INDEX_CONSTRAINT_ISNOTNULL 70 +#define SQLITE_INDEX_CONSTRAINT_ISNULL 71 +#define SQLITE_INDEX_CONSTRAINT_IS 72 /* ** CAPI3REF: Register A Virtual Table Implementation @@ -6977,9 +8041,9 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*); ** the xFileControl method. ^The return value of the xFileControl ** method becomes the return value of this routine. ** -** ^The SQLITE_FCNTL_FILE_POINTER value for the op parameter causes +** ^The [SQLITE_FCNTL_FILE_POINTER] value for the op parameter causes ** a pointer to the underlying [sqlite3_file] object to be written into -** the space pointed to by the 4th parameter. ^The SQLITE_FCNTL_FILE_POINTER +** the space pointed to by the 4th parameter. ^The [SQLITE_FCNTL_FILE_POINTER] ** case is a short-circuit path which does not actually invoke the ** underlying sqlite3_io_methods.xFileControl method. ** @@ -6991,7 +8055,7 @@ SQLITE_API sqlite3_mutex *sqlite3_db_mutex(sqlite3*); ** an incorrect zDbName and an SQLITE_ERROR return from the underlying ** xFileControl method. ** -** See also: [SQLITE_FCNTL_LOCKSTATE] +** See also: [file control opcodes] */ SQLITE_API int sqlite3_file_control(sqlite3*, const char *zDbName, int op, void*); @@ -7037,8 +8101,8 @@ SQLITE_API int sqlite3_test_control(int op, ...); #define SQLITE_TESTCTRL_ALWAYS 13 #define SQLITE_TESTCTRL_RESERVE 14 #define SQLITE_TESTCTRL_OPTIMIZATIONS 15 -#define SQLITE_TESTCTRL_ISKEYWORD 16 -#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 +#define SQLITE_TESTCTRL_ISKEYWORD 16 /* NOT USED */ +#define SQLITE_TESTCTRL_SCRATCHMALLOC 17 /* NOT USED */ #define SQLITE_TESTCTRL_LOCALTIME_FAULT 18 #define SQLITE_TESTCTRL_EXPLAIN_STMT 19 /* NOT USED */ #define SQLITE_TESTCTRL_ONCE_RESET_THRESHOLD 19 @@ -7048,7 +8112,191 @@ SQLITE_API int sqlite3_test_control(int op, ...); #define SQLITE_TESTCTRL_ISINIT 23 #define SQLITE_TESTCTRL_SORTER_MMAP 24 #define SQLITE_TESTCTRL_IMPOSTER 25 -#define SQLITE_TESTCTRL_LAST 25 +#define SQLITE_TESTCTRL_PARSER_COVERAGE 26 +#define SQLITE_TESTCTRL_LAST 26 /* Largest TESTCTRL */ + +/* +** CAPI3REF: SQL Keyword Checking +** +** These routines provide access to the set of SQL language keywords +** recognized by SQLite. Applications can uses these routines to determine +** whether or not a specific identifier needs to be escaped (for example, +** by enclosing in double-quotes) so as not to confuse the parser. +** +** The sqlite3_keyword_count() interface returns the number of distinct +** keywords understood by SQLite. +** +** The sqlite3_keyword_name(N,Z,L) interface finds the N-th keyword and +** makes *Z point to that keyword expressed as UTF8 and writes the number +** of bytes in the keyword into *L. The string that *Z points to is not +** zero-terminated. The sqlite3_keyword_name(N,Z,L) routine returns +** SQLITE_OK if N is within bounds and SQLITE_ERROR if not. If either Z +** or L are NULL or invalid pointers then calls to +** sqlite3_keyword_name(N,Z,L) result in undefined behavior. +** +** The sqlite3_keyword_check(Z,L) interface checks to see whether or not +** the L-byte UTF8 identifier that Z points to is a keyword, returning non-zero +** if it is and zero if not. +** +** The parser used by SQLite is forgiving. It is often possible to use +** a keyword as an identifier as long as such use does not result in a +** parsing ambiguity. For example, the statement +** "CREATE TABLE BEGIN(REPLACE,PRAGMA,END);" is accepted by SQLite, and +** creates a new table named "BEGIN" with three columns named +** "REPLACE", "PRAGMA", and "END". Nevertheless, best practice is to avoid +** using keywords as identifiers. Common techniques used to avoid keyword +** name collisions include: +** <ul> +** <li> Put all identifier names inside double-quotes. This is the official +** SQL way to escape identifier names. +** <li> Put identifier names inside [...]. This is not standard SQL, +** but it is what SQL Server does and so lots of programmers use this +** technique. +** <li> Begin every identifier with the letter "Z" as no SQL keywords start +** with "Z". +** <li> Include a digit somewhere in every identifier name. +** </ul> +** +** Note that the number of keywords understood by SQLite can depend on +** compile-time options. For example, "VACUUM" is not a keyword if +** SQLite is compiled with the [-DSQLITE_OMIT_VACUUM] option. Also, +** new keywords may be added to future releases of SQLite. +*/ +SQLITE_API int sqlite3_keyword_count(void); +SQLITE_API int sqlite3_keyword_name(int,const char**,int*); +SQLITE_API int sqlite3_keyword_check(const char*,int); + +/* +** CAPI3REF: Dynamic String Object +** KEYWORDS: {dynamic string} +** +** An instance of the sqlite3_str object contains a dynamically-sized +** string under construction. +** +** The lifecycle of an sqlite3_str object is as follows: +** <ol> +** <li> ^The sqlite3_str object is created using [sqlite3_str_new()]. +** <li> ^Text is appended to the sqlite3_str object using various +** methods, such as [sqlite3_str_appendf()]. +** <li> ^The sqlite3_str object is destroyed and the string it created +** is returned using the [sqlite3_str_finish()] interface. +** </ol> +*/ +typedef struct sqlite3_str sqlite3_str; + +/* +** CAPI3REF: Create A New Dynamic String Object +** CONSTRUCTOR: sqlite3_str +** +** ^The [sqlite3_str_new(D)] interface allocates and initializes +** a new [sqlite3_str] object. To avoid memory leaks, the object returned by +** [sqlite3_str_new()] must be freed by a subsequent call to +** [sqlite3_str_finish(X)]. +** +** ^The [sqlite3_str_new(D)] interface always returns a pointer to a +** valid [sqlite3_str] object, though in the event of an out-of-memory +** error the returned object might be a special singleton that will +** silently reject new text, always return SQLITE_NOMEM from +** [sqlite3_str_errcode()], always return 0 for +** [sqlite3_str_length()], and always return NULL from +** [sqlite3_str_finish(X)]. It is always safe to use the value +** returned by [sqlite3_str_new(D)] as the sqlite3_str parameter +** to any of the other [sqlite3_str] methods. +** +** The D parameter to [sqlite3_str_new(D)] may be NULL. If the +** D parameter in [sqlite3_str_new(D)] is not NULL, then the maximum +** length of the string contained in the [sqlite3_str] object will be +** the value set for [sqlite3_limit](D,[SQLITE_LIMIT_LENGTH]) instead +** of [SQLITE_MAX_LENGTH]. +*/ +SQLITE_API sqlite3_str *sqlite3_str_new(sqlite3*); + +/* +** CAPI3REF: Finalize A Dynamic String +** DESTRUCTOR: sqlite3_str +** +** ^The [sqlite3_str_finish(X)] interface destroys the sqlite3_str object X +** and returns a pointer to a memory buffer obtained from [sqlite3_malloc64()] +** that contains the constructed string. The calling application should +** pass the returned value to [sqlite3_free()] to avoid a memory leak. +** ^The [sqlite3_str_finish(X)] interface may return a NULL pointer if any +** errors were encountered during construction of the string. ^The +** [sqlite3_str_finish(X)] interface will also return a NULL pointer if the +** string in [sqlite3_str] object X is zero bytes long. +*/ +SQLITE_API char *sqlite3_str_finish(sqlite3_str*); + +/* +** CAPI3REF: Add Content To A Dynamic String +** METHOD: sqlite3_str +** +** These interfaces add content to an sqlite3_str object previously obtained +** from [sqlite3_str_new()]. +** +** ^The [sqlite3_str_appendf(X,F,...)] and +** [sqlite3_str_vappendf(X,F,V)] interfaces uses the [built-in printf] +** functionality of SQLite to append formatted text onto the end of +** [sqlite3_str] object X. +** +** ^The [sqlite3_str_append(X,S,N)] method appends exactly N bytes from string S +** onto the end of the [sqlite3_str] object X. N must be non-negative. +** S must contain at least N non-zero bytes of content. To append a +** zero-terminated string in its entirety, use the [sqlite3_str_appendall()] +** method instead. +** +** ^The [sqlite3_str_appendall(X,S)] method appends the complete content of +** zero-terminated string S onto the end of [sqlite3_str] object X. +** +** ^The [sqlite3_str_appendchar(X,N,C)] method appends N copies of the +** single-byte character C onto the end of [sqlite3_str] object X. +** ^This method can be used, for example, to add whitespace indentation. +** +** ^The [sqlite3_str_reset(X)] method resets the string under construction +** inside [sqlite3_str] object X back to zero bytes in length. +** +** These methods do not return a result code. ^If an error occurs, that fact +** is recorded in the [sqlite3_str] object and can be recovered by a +** subsequent call to [sqlite3_str_errcode(X)]. +*/ +SQLITE_API void sqlite3_str_appendf(sqlite3_str*, const char *zFormat, ...); +SQLITE_API void sqlite3_str_vappendf(sqlite3_str*, const char *zFormat, va_list); +SQLITE_API void sqlite3_str_append(sqlite3_str*, const char *zIn, int N); +SQLITE_API void sqlite3_str_appendall(sqlite3_str*, const char *zIn); +SQLITE_API void sqlite3_str_appendchar(sqlite3_str*, int N, char C); +SQLITE_API void sqlite3_str_reset(sqlite3_str*); + +/* +** CAPI3REF: Status Of A Dynamic String +** METHOD: sqlite3_str +** +** These interfaces return the current status of an [sqlite3_str] object. +** +** ^If any prior errors have occurred while constructing the dynamic string +** in sqlite3_str X, then the [sqlite3_str_errcode(X)] method will return +** an appropriate error code. ^The [sqlite3_str_errcode(X)] method returns +** [SQLITE_NOMEM] following any out-of-memory error, or +** [SQLITE_TOOBIG] if the size of the dynamic string exceeds +** [SQLITE_MAX_LENGTH], or [SQLITE_OK] if there have been no errors. +** +** ^The [sqlite3_str_length(X)] method returns the current length, in bytes, +** of the dynamic string under construction in [sqlite3_str] object X. +** ^The length returned by [sqlite3_str_length(X)] does not include the +** zero-termination byte. +** +** ^The [sqlite3_str_value(X)] method returns a pointer to the current +** content of the dynamic string under construction in X. The value +** returned by [sqlite3_str_value(X)] is managed by the sqlite3_str object X +** and might be freed or altered by any subsequent method on the same +** [sqlite3_str] object. Applications must not used the pointer returned +** [sqlite3_str_value(X)] after any subsequent method call on the same +** object. ^Applications may change the content of the string returned +** by [sqlite3_str_value(X)] as long as they do not write into any bytes +** outside the range of 0 to [sqlite3_str_length(X)] and do not read or +** write any byte after any subsequent sqlite3_str method call. +*/ +SQLITE_API int sqlite3_str_errcode(sqlite3_str*); +SQLITE_API int sqlite3_str_length(sqlite3_str*); +SQLITE_API char *sqlite3_str_value(sqlite3_str*); /* ** CAPI3REF: SQLite Runtime Status @@ -7097,8 +8345,7 @@ SQLITE_API int sqlite3_status64( ** <dd>This parameter is the current amount of memory checked out ** using [sqlite3_malloc()], either directly or indirectly. The ** figure includes calls made to [sqlite3_malloc()] by the application -** and internal memory usage by the SQLite library. Scratch memory -** controlled by [SQLITE_CONFIG_SCRATCH] and auxiliary page-cache +** and internal memory usage by the SQLite library. Auxiliary page-cache ** memory controlled by [SQLITE_CONFIG_PAGECACHE] is not included in ** this parameter. The amount returned is the sum of the allocation ** sizes as reported by the xSize method in [sqlite3_mem_methods].</dd>)^ @@ -7136,29 +8383,14 @@ SQLITE_API int sqlite3_status64( ** *pHighwater parameter to [sqlite3_status()] is of interest. ** The value written into the *pCurrent parameter is undefined.</dd>)^ ** -** [[SQLITE_STATUS_SCRATCH_USED]] ^(<dt>SQLITE_STATUS_SCRATCH_USED</dt> -** <dd>This parameter returns the number of allocations used out of the -** [scratch memory allocator] configured using -** [SQLITE_CONFIG_SCRATCH]. The value returned is in allocations, not -** in bytes. Since a single thread may only have one scratch allocation -** outstanding at time, this parameter also reports the number of threads -** using scratch memory at the same time.</dd>)^ +** [[SQLITE_STATUS_SCRATCH_USED]] <dt>SQLITE_STATUS_SCRATCH_USED</dt> +** <dd>No longer used.</dd> ** ** [[SQLITE_STATUS_SCRATCH_OVERFLOW]] ^(<dt>SQLITE_STATUS_SCRATCH_OVERFLOW</dt> -** <dd>This parameter returns the number of bytes of scratch memory -** allocation which could not be satisfied by the [SQLITE_CONFIG_SCRATCH] -** buffer and where forced to overflow to [sqlite3_malloc()]. The values -** returned include overflows because the requested allocation was too -** larger (that is, because the requested allocation was larger than the -** "sz" parameter to [SQLITE_CONFIG_SCRATCH]) and because no scratch buffer -** slots were available. -** </dd>)^ -** -** [[SQLITE_STATUS_SCRATCH_SIZE]] ^(<dt>SQLITE_STATUS_SCRATCH_SIZE</dt> -** <dd>This parameter records the largest memory allocation request -** handed to [scratch memory allocator]. Only the value returned in the -** *pHighwater parameter to [sqlite3_status()] is of interest. -** The value written into the *pCurrent parameter is undefined.</dd>)^ +** <dd>No longer used.</dd> +** +** [[SQLITE_STATUS_SCRATCH_SIZE]] <dt>SQLITE_STATUS_SCRATCH_SIZE</dt> +** <dd>No longer used.</dd> ** ** [[SQLITE_STATUS_PARSER_STACK]] ^(<dt>SQLITE_STATUS_PARSER_STACK</dt> ** <dd>The *pHighwater parameter records the deepest parser stack. @@ -7171,12 +8403,12 @@ SQLITE_API int sqlite3_status64( #define SQLITE_STATUS_MEMORY_USED 0 #define SQLITE_STATUS_PAGECACHE_USED 1 #define SQLITE_STATUS_PAGECACHE_OVERFLOW 2 -#define SQLITE_STATUS_SCRATCH_USED 3 -#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 +#define SQLITE_STATUS_SCRATCH_USED 3 /* NOT USED */ +#define SQLITE_STATUS_SCRATCH_OVERFLOW 4 /* NOT USED */ #define SQLITE_STATUS_MALLOC_SIZE 5 #define SQLITE_STATUS_PARSER_STACK 6 #define SQLITE_STATUS_PAGECACHE_SIZE 7 -#define SQLITE_STATUS_SCRATCH_SIZE 8 +#define SQLITE_STATUS_SCRATCH_SIZE 8 /* NOT USED */ #define SQLITE_STATUS_MALLOC_COUNT 9 /* @@ -7299,6 +8531,15 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r ** highwater mark associated with SQLITE_DBSTATUS_CACHE_WRITE is always 0. ** </dd> ** +** [[SQLITE_DBSTATUS_CACHE_SPILL]] ^(<dt>SQLITE_DBSTATUS_CACHE_SPILL</dt> +** <dd>This parameter returns the number of dirty cache entries that have +** been written to disk in the middle of a transaction due to the page +** cache overflowing. Transactions are more efficient if they are written +** to disk all at once. When pages spill mid-transaction, that introduces +** additional overhead. This parameter can be used help identify +** inefficiencies that can be resolve by increasing the cache size. +** </dd> +** ** [[SQLITE_DBSTATUS_DEFERRED_FKS]] ^(<dt>SQLITE_DBSTATUS_DEFERRED_FKS</dt> ** <dd>This parameter returns zero for the current value if and only if ** all foreign key constraints (deferred or immediate) have been @@ -7318,7 +8559,8 @@ SQLITE_API int sqlite3_db_status(sqlite3*, int op, int *pCur, int *pHiwtr, int r #define SQLITE_DBSTATUS_CACHE_WRITE 9 #define SQLITE_DBSTATUS_DEFERRED_FKS 10 #define SQLITE_DBSTATUS_CACHE_USED_SHARED 11 -#define SQLITE_DBSTATUS_MAX 11 /* Largest defined DBSTATUS */ +#define SQLITE_DBSTATUS_CACHE_SPILL 12 +#define SQLITE_DBSTATUS_MAX 12 /* Largest defined DBSTATUS */ /* @@ -7381,6 +8623,24 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); ** used as a proxy for the total work done by the prepared statement. ** If the number of virtual machine operations exceeds 2147483647 ** then the value returned by this statement status code is undefined. +** +** [[SQLITE_STMTSTATUS_REPREPARE]] <dt>SQLITE_STMTSTATUS_REPREPARE</dt> +** <dd>^This is the number of times that the prepare statement has been +** automatically regenerated due to schema changes or change to +** [bound parameters] that might affect the query plan. +** +** [[SQLITE_STMTSTATUS_RUN]] <dt>SQLITE_STMTSTATUS_RUN</dt> +** <dd>^This is the number of times that the prepared statement has +** been run. A single "run" for the purposes of this counter is one +** or more calls to [sqlite3_step()] followed by a call to [sqlite3_reset()]. +** The counter is incremented on the first [sqlite3_step()] call of each +** cycle. +** +** [[SQLITE_STMTSTATUS_MEMUSED]] <dt>SQLITE_STMTSTATUS_MEMUSED</dt> +** <dd>^This is the approximate number of bytes of heap memory +** used to store the prepared statement. ^This value is not actually +** a counter, and so the resetFlg parameter to sqlite3_stmt_status() +** is ignored when the opcode is SQLITE_STMTSTATUS_MEMUSED. ** </dd> ** </dl> */ @@ -7388,6 +8648,9 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt*, int op,int resetFlg); #define SQLITE_STMTSTATUS_SORT 2 #define SQLITE_STMTSTATUS_AUTOINDEX 3 #define SQLITE_STMTSTATUS_VM_STEP 4 +#define SQLITE_STMTSTATUS_REPREPARE 5 +#define SQLITE_STMTSTATUS_RUN 6 +#define SQLITE_STMTSTATUS_MEMUSED 99 /* ** CAPI3REF: Custom Page Cache Object @@ -8298,6 +9561,40 @@ SQLITE_API int sqlite3_vtab_config(sqlite3*, int op, ...); SQLITE_API int sqlite3_vtab_on_conflict(sqlite3 *); /* +** CAPI3REF: Determine If Virtual Table Column Access Is For UPDATE +** +** If the sqlite3_vtab_nochange(X) routine is called within the [xColumn] +** method of a [virtual table], then it returns true if and only if the +** column is being fetched as part of an UPDATE operation during which the +** column value will not change. Applications might use this to substitute +** a return value that is less expensive to compute and that the corresponding +** [xUpdate] method understands as a "no-change" value. +** +** If the [xColumn] method calls sqlite3_vtab_nochange() and finds that +** the column is not changed by the UPDATE statement, then the xColumn +** method can optionally return without setting a result, without calling +** any of the [sqlite3_result_int|sqlite3_result_xxxxx() interfaces]. +** In that case, [sqlite3_value_nochange(X)] will return true for the +** same column in the [xUpdate] method. +*/ +SQLITE_API int sqlite3_vtab_nochange(sqlite3_context*); + +/* +** CAPI3REF: Determine The Collation For a Virtual Table Constraint +** +** This function may only be called from within a call to the [xBestIndex] +** method of a [virtual table]. +** +** The first argument must be the sqlite3_index_info object that is the +** first parameter to the xBestIndex() method. The second argument must be +** an index into the aConstraint[] array belonging to the sqlite3_index_info +** structure passed to xBestIndex. This function returns a pointer to a buffer +** containing the name of the collation sequence for the corresponding +** constraint. +*/ +SQLITE_API SQLITE_EXPERIMENTAL const char *sqlite3_vtab_collation(sqlite3_index_info*,int); + +/* ** CAPI3REF: Conflict resolution modes ** KEYWORDS: {conflict resolution mode} ** @@ -8744,6 +10041,128 @@ SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_cmp( SQLITE_API SQLITE_EXPERIMENTAL int sqlite3_snapshot_recover(sqlite3 *db, const char *zDb); /* +** CAPI3REF: Serialize a database +** +** The sqlite3_serialize(D,S,P,F) interface returns a pointer to memory +** that is a serialization of the S database on [database connection] D. +** If P is not a NULL pointer, then the size of the database in bytes +** is written into *P. +** +** For an ordinary on-disk database file, the serialization is just a +** copy of the disk file. For an in-memory database or a "TEMP" database, +** the serialization is the same sequence of bytes which would be written +** to disk if that database where backed up to disk. +** +** The usual case is that sqlite3_serialize() copies the serialization of +** the database into memory obtained from [sqlite3_malloc64()] and returns +** a pointer to that memory. The caller is responsible for freeing the +** returned value to avoid a memory leak. However, if the F argument +** contains the SQLITE_SERIALIZE_NOCOPY bit, then no memory allocations +** are made, and the sqlite3_serialize() function will return a pointer +** to the contiguous memory representation of the database that SQLite +** is currently using for that database, or NULL if the no such contiguous +** memory representation of the database exists. A contiguous memory +** representation of the database will usually only exist if there has +** been a prior call to [sqlite3_deserialize(D,S,...)] with the same +** values of D and S. +** The size of the database is written into *P even if the +** SQLITE_SERIALIZE_NOCOPY bit is set but no contiguous copy +** of the database exists. +** +** A call to sqlite3_serialize(D,S,P,F) might return NULL even if the +** SQLITE_SERIALIZE_NOCOPY bit is omitted from argument F if a memory +** allocation error occurs. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_DESERIALIZE] option. +*/ +SQLITE_API unsigned char *sqlite3_serialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to serialize. ex: "main", "temp", ... */ + sqlite3_int64 *piSize, /* Write size of the DB here, if not NULL */ + unsigned int mFlags /* Zero or more SQLITE_SERIALIZE_* flags */ +); + +/* +** CAPI3REF: Flags for sqlite3_serialize +** +** Zero or more of the following constants can be OR-ed together for +** the F argument to [sqlite3_serialize(D,S,P,F)]. +** +** SQLITE_SERIALIZE_NOCOPY means that [sqlite3_serialize()] will return +** a pointer to contiguous in-memory database that it is currently using, +** without making a copy of the database. If SQLite is not currently using +** a contiguous in-memory database, then this option causes +** [sqlite3_serialize()] to return a NULL pointer. SQLite will only be +** using a contiguous in-memory database if it has been initialized by a +** prior call to [sqlite3_deserialize()]. +*/ +#define SQLITE_SERIALIZE_NOCOPY 0x001 /* Do no memory allocations */ + +/* +** CAPI3REF: Deserialize a database +** +** The sqlite3_deserialize(D,S,P,N,M,F) interface causes the +** [database connection] D to disconnect from database S and then +** reopen S as an in-memory database based on the serialization contained +** in P. The serialized database P is N bytes in size. M is the size of +** the buffer P, which might be larger than N. If M is larger than N, and +** the SQLITE_DESERIALIZE_READONLY bit is not set in F, then SQLite is +** permitted to add content to the in-memory database as long as the total +** size does not exceed M bytes. +** +** If the SQLITE_DESERIALIZE_FREEONCLOSE bit is set in F, then SQLite will +** invoke sqlite3_free() on the serialization buffer when the database +** connection closes. If the SQLITE_DESERIALIZE_RESIZEABLE bit is set, then +** SQLite will try to increase the buffer size using sqlite3_realloc64() +** if writes on the database cause it to grow larger than M bytes. +** +** The sqlite3_deserialize() interface will fail with SQLITE_BUSY if the +** database is currently in a read transaction or is involved in a backup +** operation. +** +** If sqlite3_deserialize(D,S,P,N,M,F) fails for any reason and if the +** SQLITE_DESERIALIZE_FREEONCLOSE bit is set in argument F, then +** [sqlite3_free()] is invoked on argument P prior to returning. +** +** This interface is only available if SQLite is compiled with the +** [SQLITE_ENABLE_DESERIALIZE] option. +*/ +SQLITE_API int sqlite3_deserialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to reopen with the deserialization */ + unsigned char *pData, /* The serialized database content */ + sqlite3_int64 szDb, /* Number bytes in the deserialization */ + sqlite3_int64 szBuf, /* Total size of buffer pData[] */ + unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */ +); + +/* +** CAPI3REF: Flags for sqlite3_deserialize() +** +** The following are allowed values for 6th argument (the F argument) to +** the [sqlite3_deserialize(D,S,P,N,M,F)] interface. +** +** The SQLITE_DESERIALIZE_FREEONCLOSE means that the database serialization +** in the P argument is held in memory obtained from [sqlite3_malloc64()] +** and that SQLite should take ownership of this memory and automatically +** free it when it has finished using it. Without this flag, the caller +** is resposible for freeing any dynamically allocated memory. +** +** The SQLITE_DESERIALIZE_RESIZEABLE flag means that SQLite is allowed to +** grow the size of the database using calls to [sqlite3_realloc64()]. This +** flag should only be used if SQLITE_DESERIALIZE_FREEONCLOSE is also used. +** Without this flag, the deserialized database cannot increase in size beyond +** the number of bytes specified by the M parameter. +** +** The SQLITE_DESERIALIZE_READONLY flag means that the deserialized database +** should be treated as read-only. +*/ +#define SQLITE_DESERIALIZE_FREEONCLOSE 1 /* Call sqlite3_free() on close */ +#define SQLITE_DESERIALIZE_RESIZEABLE 2 /* Resize using sqlite3_realloc64() */ +#define SQLITE_DESERIALIZE_READONLY 4 /* Database is read-only */ + +/* ** Undo the hack that converts floating point types to integer for ** builds on processors without floating point support. */ @@ -8890,16 +10309,23 @@ extern "C" { /* ** CAPI3REF: Session Object Handle +** +** An instance of this object is a [session] that can be used to +** record changes to a database. */ typedef struct sqlite3_session sqlite3_session; /* ** CAPI3REF: Changeset Iterator Handle +** +** An instance of this object acts as a cursor for iterating +** over the elements of a [changeset] or [patchset]. */ typedef struct sqlite3_changeset_iter sqlite3_changeset_iter; /* ** CAPI3REF: Create A New Session Object +** CONSTRUCTOR: sqlite3_session ** ** Create a new session object attached to database handle db. If successful, ** a pointer to the new object is written to *ppSession and SQLITE_OK is @@ -8936,6 +10362,7 @@ SQLITE_API int sqlite3session_create( /* ** CAPI3REF: Delete A Session Object +** DESTRUCTOR: sqlite3_session ** ** Delete a session object previously allocated using ** [sqlite3session_create()]. Once a session object has been deleted, the @@ -8951,6 +10378,7 @@ SQLITE_API void sqlite3session_delete(sqlite3_session *pSession); /* ** CAPI3REF: Enable Or Disable A Session Object +** METHOD: sqlite3_session ** ** Enable or disable the recording of changes by a session object. When ** enabled, a session object records changes made to the database. When @@ -8970,6 +10398,7 @@ SQLITE_API int sqlite3session_enable(sqlite3_session *pSession, int bEnable); /* ** CAPI3REF: Set Or Clear the Indirect Change Flag +** METHOD: sqlite3_session ** ** Each change recorded by a session object is marked as either direct or ** indirect. A change is marked as indirect if either: @@ -8999,6 +10428,7 @@ SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect) /* ** CAPI3REF: Attach A Table To A Session Object +** METHOD: sqlite3_session ** ** If argument zTab is not NULL, then it is the name of a table to attach ** to the session object passed as the first argument. All subsequent changes @@ -9024,6 +10454,35 @@ SQLITE_API int sqlite3session_indirect(sqlite3_session *pSession, int bIndirect) ** ** SQLITE_OK is returned if the call completes without error. Or, if an error ** occurs, an SQLite error code (e.g. SQLITE_NOMEM) is returned. +** +** <h3>Special sqlite_stat1 Handling</h3> +** +** As of SQLite version 3.22.0, the "sqlite_stat1" table is an exception to +** some of the rules above. In SQLite, the schema of sqlite_stat1 is: +** <pre> +** CREATE TABLE sqlite_stat1(tbl,idx,stat) +** </pre> +** +** Even though sqlite_stat1 does not have a PRIMARY KEY, changes are +** recorded for it as if the PRIMARY KEY is (tbl,idx). Additionally, changes +** are recorded for rows for which (idx IS NULL) is true. However, for such +** rows a zero-length blob (SQL value X'') is stored in the changeset or +** patchset instead of a NULL value. This allows such changesets to be +** manipulated by legacy implementations of sqlite3changeset_invert(), +** concat() and similar. +** +** The sqlite3changeset_apply() function automatically converts the +** zero-length blob back to a NULL value when updating the sqlite_stat1 +** table. However, if the application calls sqlite3changeset_new(), +** sqlite3changeset_old() or sqlite3changeset_conflict on a changeset +** iterator directly (including on a changeset iterator passed to a +** conflict-handler callback) then the X'' value is returned. The application +** must translate X'' to NULL itself if required. +** +** Legacy (older than 3.22.0) versions of the sessions module cannot capture +** changes made to the sqlite_stat1 table. Legacy versions of the +** sqlite3changeset_apply() function silently ignore any modifications to the +** sqlite_stat1 table that are part of a changeset or patchset. */ SQLITE_API int sqlite3session_attach( sqlite3_session *pSession, /* Session object */ @@ -9032,6 +10491,7 @@ SQLITE_API int sqlite3session_attach( /* ** CAPI3REF: Set a table filter on a Session Object. +** METHOD: sqlite3_session ** ** The second argument (xFilter) is the "filter callback". For changes to rows ** in tables that are not attached to the Session object, the filter is called @@ -9050,6 +10510,7 @@ SQLITE_API void sqlite3session_table_filter( /* ** CAPI3REF: Generate A Changeset From A Session Object +** METHOD: sqlite3_session ** ** Obtain a changeset containing changes to the tables attached to the ** session object passed as the first argument. If successful, @@ -9159,7 +10620,8 @@ SQLITE_API int sqlite3session_changeset( ); /* -** CAPI3REF: Load The Difference Between Tables Into A Session +** CAPI3REF: Load The Difference Between Tables Into A Session +** METHOD: sqlite3_session ** ** If it is not already attached to the session object passed as the first ** argument, this function attaches table zTbl in the same manner as the @@ -9224,6 +10686,7 @@ SQLITE_API int sqlite3session_diff( /* ** CAPI3REF: Generate A Patchset From A Session Object +** METHOD: sqlite3_session ** ** The differences between a patchset and a changeset are that: ** @@ -9252,8 +10715,8 @@ SQLITE_API int sqlite3session_diff( */ SQLITE_API int sqlite3session_patchset( sqlite3_session *pSession, /* Session object */ - int *pnPatchset, /* OUT: Size of buffer at *ppChangeset */ - void **ppPatchset /* OUT: Buffer containing changeset */ + int *pnPatchset, /* OUT: Size of buffer at *ppPatchset */ + void **ppPatchset /* OUT: Buffer containing patchset */ ); /* @@ -9275,6 +10738,7 @@ SQLITE_API int sqlite3session_isempty(sqlite3_session *pSession); /* ** CAPI3REF: Create An Iterator To Traverse A Changeset +** CONSTRUCTOR: sqlite3_changeset_iter ** ** Create an iterator used to iterate through the contents of a changeset. ** If successful, *pp is set to point to the iterator handle and SQLITE_OK @@ -9315,6 +10779,7 @@ SQLITE_API int sqlite3changeset_start( /* ** CAPI3REF: Advance A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function may only be used with iterators created by function ** [sqlite3changeset_start()]. If it is called on an iterator passed to @@ -9339,6 +10804,7 @@ SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *pIter); /* ** CAPI3REF: Obtain The Current Operation From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -9373,6 +10839,7 @@ SQLITE_API int sqlite3changeset_op( /* ** CAPI3REF: Obtain The Primary Key Definition Of A Table +** METHOD: sqlite3_changeset_iter ** ** For each modified table, a changeset includes the following: ** @@ -9404,6 +10871,7 @@ SQLITE_API int sqlite3changeset_pk( /* ** CAPI3REF: Obtain old.* Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -9434,6 +10902,7 @@ SQLITE_API int sqlite3changeset_old( /* ** CAPI3REF: Obtain new.* Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** The pIter argument passed to this function may either be an iterator ** passed to a conflict-handler by [sqlite3changeset_apply()], or an iterator @@ -9467,6 +10936,7 @@ SQLITE_API int sqlite3changeset_new( /* ** CAPI3REF: Obtain Conflicting Row Values From A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function should only be used with iterator objects passed to a ** conflict-handler callback by [sqlite3changeset_apply()] with either @@ -9494,6 +10964,7 @@ SQLITE_API int sqlite3changeset_conflict( /* ** CAPI3REF: Determine The Number Of Foreign Key Constraint Violations +** METHOD: sqlite3_changeset_iter ** ** This function may only be called with an iterator passed to an ** SQLITE_CHANGESET_FOREIGN_KEY conflict handler callback. In this case @@ -9510,6 +10981,7 @@ SQLITE_API int sqlite3changeset_fk_conflicts( /* ** CAPI3REF: Finalize A Changeset Iterator +** METHOD: sqlite3_changeset_iter ** ** This function is used to finalize an iterator allocated with ** [sqlite3changeset_start()]. @@ -9526,6 +10998,7 @@ SQLITE_API int sqlite3changeset_fk_conflicts( ** to that error is returned by this function. Otherwise, SQLITE_OK is ** returned. This is to allow the following pattern (pseudo-code): ** +** <pre> ** sqlite3changeset_start(); ** while( SQLITE_ROW==sqlite3changeset_next() ){ ** // Do something with change. @@ -9534,6 +11007,7 @@ SQLITE_API int sqlite3changeset_fk_conflicts( ** if( rc!=SQLITE_OK ){ ** // An error has occurred ** } +** </pre> */ SQLITE_API int sqlite3changeset_finalize(sqlite3_changeset_iter *pIter); @@ -9581,6 +11055,7 @@ SQLITE_API int sqlite3changeset_invert( ** sqlite3_changegroup object. Calling it produces similar results as the ** following code fragment: ** +** <pre> ** sqlite3_changegroup *pGrp; ** rc = sqlite3_changegroup_new(&pGrp); ** if( rc==SQLITE_OK ) rc = sqlite3changegroup_add(pGrp, nA, pA); @@ -9591,6 +11066,7 @@ SQLITE_API int sqlite3changeset_invert( ** *ppOut = 0; ** *pnOut = 0; ** } +** </pre> ** ** Refer to the sqlite3_changegroup documentation below for details. */ @@ -9606,11 +11082,15 @@ SQLITE_API int sqlite3changeset_concat( /* ** CAPI3REF: Changegroup Handle +** +** A changegroup is an object used to combine two or more +** [changesets] or [patchsets] */ typedef struct sqlite3_changegroup sqlite3_changegroup; /* ** CAPI3REF: Create A New Changegroup Object +** CONSTRUCTOR: sqlite3_changegroup ** ** An sqlite3_changegroup object is used to combine two or more changesets ** (or patchsets) into a single changeset (or patchset). A single changegroup @@ -9644,10 +11124,11 @@ typedef struct sqlite3_changegroup sqlite3_changegroup; ** sqlite3changegroup_output() functions, also available are the streaming ** versions sqlite3changegroup_add_strm() and sqlite3changegroup_output_strm(). */ -int sqlite3changegroup_new(sqlite3_changegroup **pp); +SQLITE_API int sqlite3changegroup_new(sqlite3_changegroup **pp); /* ** CAPI3REF: Add A Changeset To A Changegroup +** METHOD: sqlite3_changegroup ** ** Add all changes within the changeset (or patchset) in buffer pData (size ** nData bytes) to the changegroup. @@ -9721,10 +11202,11 @@ int sqlite3changegroup_new(sqlite3_changegroup **pp); ** ** If no error occurs, SQLITE_OK is returned. */ -int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData); +SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData); /* ** CAPI3REF: Obtain A Composite Changeset From A Changegroup +** METHOD: sqlite3_changegroup ** ** Obtain a buffer containing a changeset (or patchset) representing the ** current contents of the changegroup. If the inputs to the changegroup @@ -9747,7 +11229,7 @@ int sqlite3changegroup_add(sqlite3_changegroup*, int nData, void *pData); ** responsibility of the caller to eventually free the buffer using a ** call to sqlite3_free(). */ -int sqlite3changegroup_output( +SQLITE_API int sqlite3changegroup_output( sqlite3_changegroup*, int *pnData, /* OUT: Size of output buffer in bytes */ void **ppData /* OUT: Pointer to output buffer */ @@ -9755,25 +11237,25 @@ int sqlite3changegroup_output( /* ** CAPI3REF: Delete A Changegroup Object +** DESTRUCTOR: sqlite3_changegroup */ -void sqlite3changegroup_delete(sqlite3_changegroup*); +SQLITE_API void sqlite3changegroup_delete(sqlite3_changegroup*); /* ** CAPI3REF: Apply A Changeset To A Database ** -** Apply a changeset to a database. This function attempts to update the -** "main" database attached to handle db with the changes found in the -** changeset passed via the second and third arguments. +** Apply a changeset or patchset to a database. These functions attempt to +** update the "main" database attached to handle db with the changes found in +** the changeset passed via the second and third arguments. ** -** The fourth argument (xFilter) passed to this function is the "filter +** The fourth argument (xFilter) passed to these functions is the "filter ** callback". If it is not NULL, then for each table affected by at least one ** change in the changeset, the filter callback is invoked with ** the table name as the second argument, and a copy of the context pointer -** passed as the sixth argument to this function as the first. If the "filter -** callback" returns zero, then no attempt is made to apply any changes to -** the table. Otherwise, if the return value is non-zero or the xFilter -** argument to this function is NULL, all changes related to the table are -** attempted. +** passed as the sixth argument as the first. If the "filter callback" +** returns zero, then no attempt is made to apply any changes to the table. +** Otherwise, if the return value is non-zero or the xFilter argument to +** is NULL, all changes related to the table are attempted. ** ** For each table that is not excluded by the filter callback, this function ** tests that the target database contains a compatible table. A table is @@ -9818,7 +11300,7 @@ void sqlite3changegroup_delete(sqlite3_changegroup*); ** ** <dl> ** <dt>DELETE Changes<dd> -** For each DELETE change, this function checks if the target database +** For each DELETE change, the function checks if the target database ** contains a row with the same primary key value (or values) as the ** original row values stored in the changeset. If it does, and the values ** stored in all non-primary key columns also match the values stored in @@ -9863,7 +11345,7 @@ void sqlite3changegroup_delete(sqlite3_changegroup*); ** [SQLITE_CHANGESET_REPLACE]. ** ** <dt>UPDATE Changes<dd> -** For each UPDATE change, this function checks if the target database +** For each UPDATE change, the function checks if the target database ** contains a row with the same primary key value (or values) as the ** original row values stored in the changeset. If it does, and the values ** stored in all modified non-primary key columns also match the values @@ -9894,11 +11376,28 @@ void sqlite3changegroup_delete(sqlite3_changegroup*); ** This can be used to further customize the applications conflict ** resolution strategy. ** -** All changes made by this function are enclosed in a savepoint transaction. +** All changes made by these functions are enclosed in a savepoint transaction. ** If any other error (aside from a constraint failure when attempting to ** write to the target database) occurs, then the savepoint transaction is ** rolled back, restoring the target database to its original state, and an ** SQLite error code returned. +** +** If the output parameters (ppRebase) and (pnRebase) are non-NULL and +** the input is a changeset (not a patchset), then sqlite3changeset_apply_v2() +** may set (*ppRebase) to point to a "rebase" that may be used with the +** sqlite3_rebaser APIs buffer before returning. In this case (*pnRebase) +** is set to the size of the buffer in bytes. It is the responsibility of the +** caller to eventually free any such buffer using sqlite3_free(). The buffer +** is only allocated and populated if one or more conflicts were encountered +** while applying the patchset. See comments surrounding the sqlite3_rebaser +** APIs for further details. +** +** The behavior of sqlite3changeset_apply_v2() and its streaming equivalent +** may be modified by passing a combination of +** [SQLITE_CHANGESETAPPLY_NOSAVEPOINT | supported flags] as the 9th parameter. +** +** Note that the sqlite3changeset_apply_v2() API is still <b>experimental</b> +** and therefore subject to change. */ SQLITE_API int sqlite3changeset_apply( sqlite3 *db, /* Apply change to "main" db of this handle */ @@ -9915,6 +11414,41 @@ SQLITE_API int sqlite3changeset_apply( ), void *pCtx /* First argument passed to xConflict */ ); +SQLITE_API int sqlite3changeset_apply_v2( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int nChangeset, /* Size of changeset in bytes */ + void *pChangeset, /* Changeset blob */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, /* OUT: Rebase data */ + int flags /* Combination of SESSION_APPLY_* flags */ +); + +/* +** CAPI3REF: Flags for sqlite3changeset_apply_v2 +** +** The following flags may passed via the 9th parameter to +** [sqlite3changeset_apply_v2] and [sqlite3changeset_apply_v2_strm]: +** +** <dl> +** <dt>SQLITE_CHANGESETAPPLY_NOSAVEPOINT <dd> +** Usually, the sessions module encloses all operations performed by +** a single call to apply_v2() or apply_v2_strm() in a [SAVEPOINT]. The +** SAVEPOINT is committed if the changeset or patchset is successfully +** applied, or rolled back if an error occurs. Specifying this flag +** causes the sessions module to omit this savepoint. In this case, if the +** caller has an open transaction or savepoint when apply_v2() is called, +** it may revert the partially applied changeset by rolling it back. +*/ +#define SQLITE_CHANGESETAPPLY_NOSAVEPOINT 0x0001 /* ** CAPI3REF: Constants Passed To The Conflict Handler @@ -10012,6 +11546,161 @@ SQLITE_API int sqlite3changeset_apply( #define SQLITE_CHANGESET_REPLACE 1 #define SQLITE_CHANGESET_ABORT 2 +/* +** CAPI3REF: Rebasing changesets +** EXPERIMENTAL +** +** Suppose there is a site hosting a database in state S0. And that +** modifications are made that move that database to state S1 and a +** changeset recorded (the "local" changeset). Then, a changeset based +** on S0 is received from another site (the "remote" changeset) and +** applied to the database. The database is then in state +** (S1+"remote"), where the exact state depends on any conflict +** resolution decisions (OMIT or REPLACE) made while applying "remote". +** Rebasing a changeset is to update it to take those conflict +** resolution decisions into account, so that the same conflicts +** do not have to be resolved elsewhere in the network. +** +** For example, if both the local and remote changesets contain an +** INSERT of the same key on "CREATE TABLE t1(a PRIMARY KEY, b)": +** +** local: INSERT INTO t1 VALUES(1, 'v1'); +** remote: INSERT INTO t1 VALUES(1, 'v2'); +** +** and the conflict resolution is REPLACE, then the INSERT change is +** removed from the local changeset (it was overridden). Or, if the +** conflict resolution was "OMIT", then the local changeset is modified +** to instead contain: +** +** UPDATE t1 SET b = 'v2' WHERE a=1; +** +** Changes within the local changeset are rebased as follows: +** +** <dl> +** <dt>Local INSERT<dd> +** This may only conflict with a remote INSERT. If the conflict +** resolution was OMIT, then add an UPDATE change to the rebased +** changeset. Or, if the conflict resolution was REPLACE, add +** nothing to the rebased changeset. +** +** <dt>Local DELETE<dd> +** This may conflict with a remote UPDATE or DELETE. In both cases the +** only possible resolution is OMIT. If the remote operation was a +** DELETE, then add no change to the rebased changeset. If the remote +** operation was an UPDATE, then the old.* fields of change are updated +** to reflect the new.* values in the UPDATE. +** +** <dt>Local UPDATE<dd> +** This may conflict with a remote UPDATE or DELETE. If it conflicts +** with a DELETE, and the conflict resolution was OMIT, then the update +** is changed into an INSERT. Any undefined values in the new.* record +** from the update change are filled in using the old.* values from +** the conflicting DELETE. Or, if the conflict resolution was REPLACE, +** the UPDATE change is simply omitted from the rebased changeset. +** +** If conflict is with a remote UPDATE and the resolution is OMIT, then +** the old.* values are rebased using the new.* values in the remote +** change. Or, if the resolution is REPLACE, then the change is copied +** into the rebased changeset with updates to columns also updated by +** the conflicting remote UPDATE removed. If this means no columns would +** be updated, the change is omitted. +** </dl> +** +** A local change may be rebased against multiple remote changes +** simultaneously. If a single key is modified by multiple remote +** changesets, they are combined as follows before the local changeset +** is rebased: +** +** <ul> +** <li> If there has been one or more REPLACE resolutions on a +** key, it is rebased according to a REPLACE. +** +** <li> If there have been no REPLACE resolutions on a key, then +** the local changeset is rebased according to the most recent +** of the OMIT resolutions. +** </ul> +** +** Note that conflict resolutions from multiple remote changesets are +** combined on a per-field basis, not per-row. This means that in the +** case of multiple remote UPDATE operations, some fields of a single +** local change may be rebased for REPLACE while others are rebased for +** OMIT. +** +** In order to rebase a local changeset, the remote changeset must first +** be applied to the local database using sqlite3changeset_apply_v2() and +** the buffer of rebase information captured. Then: +** +** <ol> +** <li> An sqlite3_rebaser object is created by calling +** sqlite3rebaser_create(). +** <li> The new object is configured with the rebase buffer obtained from +** sqlite3changeset_apply_v2() by calling sqlite3rebaser_configure(). +** If the local changeset is to be rebased against multiple remote +** changesets, then sqlite3rebaser_configure() should be called +** multiple times, in the same order that the multiple +** sqlite3changeset_apply_v2() calls were made. +** <li> Each local changeset is rebased by calling sqlite3rebaser_rebase(). +** <li> The sqlite3_rebaser object is deleted by calling +** sqlite3rebaser_delete(). +** </ol> +*/ +typedef struct sqlite3_rebaser sqlite3_rebaser; + +/* +** CAPI3REF: Create a changeset rebaser object. +** EXPERIMENTAL +** +** Allocate a new changeset rebaser object. If successful, set (*ppNew) to +** point to the new object and return SQLITE_OK. Otherwise, if an error +** occurs, return an SQLite error code (e.g. SQLITE_NOMEM) and set (*ppNew) +** to NULL. +*/ +SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew); + +/* +** CAPI3REF: Configure a changeset rebaser object. +** EXPERIMENTAL +** +** Configure the changeset rebaser object to rebase changesets according +** to the conflict resolutions described by buffer pRebase (size nRebase +** bytes), which must have been obtained from a previous call to +** sqlite3changeset_apply_v2(). +*/ +SQLITE_API int sqlite3rebaser_configure( + sqlite3_rebaser*, + int nRebase, const void *pRebase +); + +/* +** CAPI3REF: Rebase a changeset +** EXPERIMENTAL +** +** Argument pIn must point to a buffer containing a changeset nIn bytes +** in size. This function allocates and populates a buffer with a copy +** of the changeset rebased rebased according to the configuration of the +** rebaser object passed as the first argument. If successful, (*ppOut) +** is set to point to the new buffer containing the rebased changset and +** (*pnOut) to its size in bytes and SQLITE_OK returned. It is the +** responsibility of the caller to eventually free the new buffer using +** sqlite3_free(). Otherwise, if an error occurs, (*ppOut) and (*pnOut) +** are set to zero and an SQLite error code returned. +*/ +SQLITE_API int sqlite3rebaser_rebase( + sqlite3_rebaser*, + int nIn, const void *pIn, + int *pnOut, void **ppOut +); + +/* +** CAPI3REF: Delete a changeset rebaser object. +** EXPERIMENTAL +** +** Delete the changeset rebaser object and all associated resources. There +** should be one call to this function for each successful invocation +** of sqlite3rebaser_create(). +*/ +SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p); + /* ** CAPI3REF: Streaming Versions of API functions. ** @@ -10020,12 +11709,13 @@ SQLITE_API int sqlite3changeset_apply( ** ** <table border=1 style="margin-left:8ex;margin-right:8ex"> ** <tr><th>Streaming function<th>Non-streaming equivalent</th> -** <tr><td>sqlite3changeset_apply_str<td>[sqlite3changeset_apply] -** <tr><td>sqlite3changeset_concat_str<td>[sqlite3changeset_concat] -** <tr><td>sqlite3changeset_invert_str<td>[sqlite3changeset_invert] -** <tr><td>sqlite3changeset_start_str<td>[sqlite3changeset_start] -** <tr><td>sqlite3session_changeset_str<td>[sqlite3session_changeset] -** <tr><td>sqlite3session_patchset_str<td>[sqlite3session_patchset] +** <tr><td>sqlite3changeset_apply_strm<td>[sqlite3changeset_apply] +** <tr><td>sqlite3changeset_apply_strm_v2<td>[sqlite3changeset_apply_v2] +** <tr><td>sqlite3changeset_concat_strm<td>[sqlite3changeset_concat] +** <tr><td>sqlite3changeset_invert_strm<td>[sqlite3changeset_invert] +** <tr><td>sqlite3changeset_start_strm<td>[sqlite3changeset_start] +** <tr><td>sqlite3session_changeset_strm<td>[sqlite3session_changeset] +** <tr><td>sqlite3session_patchset_strm<td>[sqlite3session_patchset] ** </table> ** ** Non-streaming functions that accept changesets (or patchsets) as input @@ -10116,6 +11806,23 @@ SQLITE_API int sqlite3changeset_apply_strm( ), void *pCtx /* First argument passed to xConflict */ ); +SQLITE_API int sqlite3changeset_apply_v2_strm( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */ + void *pIn, /* First arg for xInput */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, + int flags +); SQLITE_API int sqlite3changeset_concat_strm( int (*xInputA)(void *pIn, void *pData, int *pnData), void *pInA, @@ -10145,14 +11852,21 @@ SQLITE_API int sqlite3session_patchset_strm( int (*xOutput)(void *pOut, const void *pData, int nData), void *pOut ); -int sqlite3changegroup_add_strm(sqlite3_changegroup*, +SQLITE_API int sqlite3changegroup_add_strm(sqlite3_changegroup*, int (*xInput)(void *pIn, void *pData, int *pnData), void *pIn ); -int sqlite3changegroup_output_strm(sqlite3_changegroup*, +SQLITE_API int sqlite3changegroup_output_strm(sqlite3_changegroup*, int (*xOutput)(void *pOut, const void *pData, int nData), void *pOut ); +SQLITE_API int sqlite3rebaser_rebase_strm( + sqlite3_rebaser *pRebaser, + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int (*xOutput)(void *pOut, const void *pData, int nData), + void *pOut +); /* @@ -10754,8 +12468,9 @@ struct fts5_api { ** Include the configuration header output by 'configure' if we're using the ** autoconf-based build */ -#ifdef _HAVE_SQLITE_CONFIG_H -#include "config.h" +#if defined(_HAVE_SQLITE_CONFIG_H) && !defined(SQLITECONFIG_H) +/* #include "config.h" */ +#define SQLITECONFIG_H 1 #endif /************** Include sqliteLimit.h in the middle of sqliteInt.h ***********/ @@ -10849,7 +12564,7 @@ struct fts5_api { ** Not currently enforced. */ #ifndef SQLITE_MAX_VDBE_OP -# define SQLITE_MAX_VDBE_OP 25000 +# define SQLITE_MAX_VDBE_OP 250000000 #endif /* @@ -11065,6 +12780,11 @@ struct fts5_api { ** ** Older versions of SQLite used an optional THREADSAFE macro. ** We support that for legacy. +** +** To ensure that the correct value of "THREADSAFE" is reported when querying +** for compile-time options at runtime (e.g. "PRAGMA compile_options"), this +** logic is partially replicated in ctime.c. If it is updated here, it should +** also be updated there. */ #if !defined(SQLITE_THREADSAFE) # if defined(THREADSAFE) @@ -11240,6 +12960,21 @@ SQLITE_PRIVATE void sqlite3Coverage(int); #endif /* +** Some conditionals are optimizations only. In other words, if the +** conditionals are replaced with a constant 1 (true) or 0 (false) then +** the correct answer is still obtained, though perhaps not as quickly. +** +** The following macros mark these optimizations conditionals. +*/ +#if defined(SQLITE_MUTATION_TEST) +# define OK_IF_ALWAYS_TRUE(X) (1) +# define OK_IF_ALWAYS_FALSE(X) (0) +#else +# define OK_IF_ALWAYS_TRUE(X) (X) +# define OK_IF_ALWAYS_FALSE(X) (X) +#endif + +/* ** Some malloc failures are only possible if SQLITE_TEST_REALLOC_STRESS is ** defined. We need to defend against those failures when testing with ** SQLITE_TEST_REALLOC_STRESS, but we don't want the unreachable branches @@ -11433,141 +13168,141 @@ SQLITE_PRIVATE void sqlite3HashClear(Hash*); #define TK_AS 24 #define TK_WITHOUT 25 #define TK_COMMA 26 -#define TK_OR 27 -#define TK_AND 28 -#define TK_IS 29 -#define TK_MATCH 30 -#define TK_LIKE_KW 31 -#define TK_BETWEEN 32 -#define TK_IN 33 -#define TK_ISNULL 34 -#define TK_NOTNULL 35 -#define TK_NE 36 -#define TK_EQ 37 -#define TK_GT 38 -#define TK_LE 39 -#define TK_LT 40 -#define TK_GE 41 -#define TK_ESCAPE 42 -#define TK_BITAND 43 -#define TK_BITOR 44 -#define TK_LSHIFT 45 -#define TK_RSHIFT 46 -#define TK_PLUS 47 -#define TK_MINUS 48 -#define TK_STAR 49 -#define TK_SLASH 50 -#define TK_REM 51 -#define TK_CONCAT 52 -#define TK_COLLATE 53 -#define TK_BITNOT 54 -#define TK_ID 55 -#define TK_INDEXED 56 -#define TK_ABORT 57 -#define TK_ACTION 58 -#define TK_AFTER 59 -#define TK_ANALYZE 60 -#define TK_ASC 61 -#define TK_ATTACH 62 -#define TK_BEFORE 63 -#define TK_BY 64 -#define TK_CASCADE 65 -#define TK_CAST 66 -#define TK_COLUMNKW 67 -#define TK_CONFLICT 68 -#define TK_DATABASE 69 -#define TK_DESC 70 -#define TK_DETACH 71 -#define TK_EACH 72 -#define TK_FAIL 73 -#define TK_FOR 74 -#define TK_IGNORE 75 -#define TK_INITIALLY 76 -#define TK_INSTEAD 77 -#define TK_NO 78 -#define TK_KEY 79 -#define TK_OF 80 -#define TK_OFFSET 81 -#define TK_PRAGMA 82 -#define TK_RAISE 83 -#define TK_RECURSIVE 84 -#define TK_REPLACE 85 -#define TK_RESTRICT 86 -#define TK_ROW 87 -#define TK_TRIGGER 88 -#define TK_VACUUM 89 -#define TK_VIEW 90 -#define TK_VIRTUAL 91 -#define TK_WITH 92 -#define TK_REINDEX 93 -#define TK_RENAME 94 -#define TK_CTIME_KW 95 -#define TK_ANY 96 -#define TK_STRING 97 -#define TK_JOIN_KW 98 -#define TK_CONSTRAINT 99 -#define TK_DEFAULT 100 -#define TK_NULL 101 -#define TK_PRIMARY 102 -#define TK_UNIQUE 103 -#define TK_CHECK 104 -#define TK_REFERENCES 105 -#define TK_AUTOINCR 106 -#define TK_ON 107 -#define TK_INSERT 108 -#define TK_DELETE 109 -#define TK_UPDATE 110 -#define TK_SET 111 -#define TK_DEFERRABLE 112 -#define TK_FOREIGN 113 -#define TK_DROP 114 -#define TK_UNION 115 -#define TK_ALL 116 -#define TK_EXCEPT 117 -#define TK_INTERSECT 118 -#define TK_SELECT 119 -#define TK_VALUES 120 -#define TK_DISTINCT 121 -#define TK_DOT 122 -#define TK_FROM 123 -#define TK_JOIN 124 -#define TK_USING 125 -#define TK_ORDER 126 -#define TK_GROUP 127 -#define TK_HAVING 128 -#define TK_LIMIT 129 -#define TK_WHERE 130 -#define TK_INTO 131 -#define TK_FLOAT 132 -#define TK_BLOB 133 -#define TK_INTEGER 134 -#define TK_VARIABLE 135 -#define TK_CASE 136 -#define TK_WHEN 137 -#define TK_THEN 138 -#define TK_ELSE 139 -#define TK_INDEX 140 -#define TK_ALTER 141 -#define TK_ADD 142 -#define TK_TO_TEXT 143 -#define TK_TO_BLOB 144 -#define TK_TO_NUMERIC 145 -#define TK_TO_INT 146 -#define TK_TO_REAL 147 -#define TK_ISNOT 148 -#define TK_END_OF_FILE 149 -#define TK_UNCLOSED_STRING 150 -#define TK_FUNCTION 151 -#define TK_COLUMN 152 -#define TK_AGG_FUNCTION 153 -#define TK_AGG_COLUMN 154 -#define TK_UMINUS 155 -#define TK_UPLUS 156 -#define TK_REGISTER 157 -#define TK_VECTOR 158 -#define TK_SELECT_COLUMN 159 -#define TK_ASTERISK 160 -#define TK_SPAN 161 +#define TK_ABORT 27 +#define TK_ACTION 28 +#define TK_AFTER 29 +#define TK_ANALYZE 30 +#define TK_ASC 31 +#define TK_ATTACH 32 +#define TK_BEFORE 33 +#define TK_BY 34 +#define TK_CASCADE 35 +#define TK_CAST 36 +#define TK_CONFLICT 37 +#define TK_DATABASE 38 +#define TK_DESC 39 +#define TK_DETACH 40 +#define TK_EACH 41 +#define TK_FAIL 42 +#define TK_OR 43 +#define TK_AND 44 +#define TK_IS 45 +#define TK_MATCH 46 +#define TK_LIKE_KW 47 +#define TK_BETWEEN 48 +#define TK_IN 49 +#define TK_ISNULL 50 +#define TK_NOTNULL 51 +#define TK_NE 52 +#define TK_EQ 53 +#define TK_GT 54 +#define TK_LE 55 +#define TK_LT 56 +#define TK_GE 57 +#define TK_ESCAPE 58 +#define TK_ID 59 +#define TK_COLUMNKW 60 +#define TK_DO 61 +#define TK_FOR 62 +#define TK_IGNORE 63 +#define TK_INITIALLY 64 +#define TK_INSTEAD 65 +#define TK_NO 66 +#define TK_KEY 67 +#define TK_OF 68 +#define TK_OFFSET 69 +#define TK_PRAGMA 70 +#define TK_RAISE 71 +#define TK_RECURSIVE 72 +#define TK_REPLACE 73 +#define TK_RESTRICT 74 +#define TK_ROW 75 +#define TK_TRIGGER 76 +#define TK_VACUUM 77 +#define TK_VIEW 78 +#define TK_VIRTUAL 79 +#define TK_WITH 80 +#define TK_REINDEX 81 +#define TK_RENAME 82 +#define TK_CTIME_KW 83 +#define TK_ANY 84 +#define TK_BITAND 85 +#define TK_BITOR 86 +#define TK_LSHIFT 87 +#define TK_RSHIFT 88 +#define TK_PLUS 89 +#define TK_MINUS 90 +#define TK_STAR 91 +#define TK_SLASH 92 +#define TK_REM 93 +#define TK_CONCAT 94 +#define TK_COLLATE 95 +#define TK_BITNOT 96 +#define TK_ON 97 +#define TK_INDEXED 98 +#define TK_STRING 99 +#define TK_JOIN_KW 100 +#define TK_CONSTRAINT 101 +#define TK_DEFAULT 102 +#define TK_NULL 103 +#define TK_PRIMARY 104 +#define TK_UNIQUE 105 +#define TK_CHECK 106 +#define TK_REFERENCES 107 +#define TK_AUTOINCR 108 +#define TK_INSERT 109 +#define TK_DELETE 110 +#define TK_UPDATE 111 +#define TK_SET 112 +#define TK_DEFERRABLE 113 +#define TK_FOREIGN 114 +#define TK_DROP 115 +#define TK_UNION 116 +#define TK_ALL 117 +#define TK_EXCEPT 118 +#define TK_INTERSECT 119 +#define TK_SELECT 120 +#define TK_VALUES 121 +#define TK_DISTINCT 122 +#define TK_DOT 123 +#define TK_FROM 124 +#define TK_JOIN 125 +#define TK_USING 126 +#define TK_ORDER 127 +#define TK_GROUP 128 +#define TK_HAVING 129 +#define TK_LIMIT 130 +#define TK_WHERE 131 +#define TK_INTO 132 +#define TK_NOTHING 133 +#define TK_FLOAT 134 +#define TK_BLOB 135 +#define TK_INTEGER 136 +#define TK_VARIABLE 137 +#define TK_CASE 138 +#define TK_WHEN 139 +#define TK_THEN 140 +#define TK_ELSE 141 +#define TK_INDEX 142 +#define TK_ALTER 143 +#define TK_ADD 144 +#define TK_TRUEFALSE 145 +#define TK_ISNOT 146 +#define TK_FUNCTION 147 +#define TK_COLUMN 148 +#define TK_AGG_FUNCTION 149 +#define TK_AGG_COLUMN 150 +#define TK_UMINUS 151 +#define TK_UPLUS 152 +#define TK_TRUTH 153 +#define TK_REGISTER 154 +#define TK_VECTOR 155 +#define TK_SELECT_COLUMN 156 +#define TK_IF_NULL_ROW 157 +#define TK_ASTERISK 158 +#define TK_SPAN 159 +#define TK_END_OF_FILE 160 +#define TK_UNCLOSED_STRING 161 #define TK_SPACE 162 #define TK_ILLEGAL 163 @@ -11654,7 +13389,6 @@ SQLITE_PRIVATE void sqlite3HashClear(Hash*); */ #ifndef SQLITE_TEMP_STORE # define SQLITE_TEMP_STORE 1 -# define SQLITE_TEMP_STORE_xc 1 /* Exclude from ctime.c */ #endif /* @@ -11691,6 +13425,22 @@ SQLITE_PRIVATE void sqlite3HashClear(Hash*); #endif /* +** Default value for the SQLITE_CONFIG_SORTERREF_SIZE option. +*/ +#ifndef SQLITE_DEFAULT_SORTERREF_SIZE +# define SQLITE_DEFAULT_SORTERREF_SIZE 0x7fffffff +#endif + +/* +** The compile-time options SQLITE_MMAP_READWRITE and +** SQLITE_ENABLE_BATCH_ATOMIC_WRITE are not compatible with one another. +** You must choose one or the other (or neither) but not both. +*/ +#if defined(SQLITE_MMAP_READWRITE) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) +#error Cannot use both SQLITE_MMAP_READWRITE and SQLITE_ENABLE_BATCH_ATOMIC_WRITE +#endif + +/* ** GCC does not define the offsetof() macro so we'll have to do it ** ourselves. */ @@ -11955,7 +13705,6 @@ typedef INT16_TYPE LogEst; # else # define SQLITE_MAX_MMAP_SIZE 0 # endif -# define SQLITE_MAX_MMAP_SIZE_xc 1 /* exclude from ctime.c */ #endif /* @@ -11965,7 +13714,6 @@ typedef INT16_TYPE LogEst; */ #ifndef SQLITE_DEFAULT_MMAP_SIZE # define SQLITE_DEFAULT_MMAP_SIZE 0 -# define SQLITE_DEFAULT_MMAP_SIZE_xc 1 /* Exclude from ctime.c */ #endif #if SQLITE_DEFAULT_MMAP_SIZE>SQLITE_MAX_MMAP_SIZE # undef SQLITE_DEFAULT_MMAP_SIZE @@ -11990,7 +13738,7 @@ typedef INT16_TYPE LogEst; ** SELECTTRACE_ENABLED will be either 1 or 0 depending on whether or not ** the Select query generator tracing logic is turned on. */ -#if defined(SQLITE_DEBUG) || defined(SQLITE_ENABLE_SELECTTRACE) +#if defined(SQLITE_ENABLE_SELECTTRACE) # define SELECTTRACE_ENABLED 1 #else # define SELECTTRACE_ENABLED 0 @@ -12007,9 +13755,10 @@ typedef INT16_TYPE LogEst; */ typedef struct BusyHandler BusyHandler; struct BusyHandler { - int (*xFunc)(void *,int); /* The busy callback */ - void *pArg; /* First arg to busy callback */ - int nBusy; /* Incremented with each busy call */ + int (*xBusyHandler)(void *,int); /* The busy callback */ + void *pBusyArg; /* First arg to busy callback */ + int nBusy; /* Incremented with each busy call */ + u8 bExtraFileArg; /* Include sqlite3_file as callback arg */ }; /* @@ -12109,7 +13858,6 @@ typedef struct Db Db; typedef struct Schema Schema; typedef struct Expr Expr; typedef struct ExprList ExprList; -typedef struct ExprSpan ExprSpan; typedef struct FKey FKey; typedef struct FuncDestructor FuncDestructor; typedef struct FuncDef FuncDef; @@ -12132,7 +13880,7 @@ typedef struct Select Select; typedef struct SQLiteThread SQLiteThread; typedef struct SelectDest SelectDest; typedef struct SrcList SrcList; -typedef struct StrAccum StrAccum; +typedef struct sqlite3_str StrAccum; /* Internal alias for sqlite3_str */ typedef struct Table Table; typedef struct TableLock TableLock; typedef struct Token Token; @@ -12141,6 +13889,7 @@ typedef struct Trigger Trigger; typedef struct TriggerPrg TriggerPrg; typedef struct TriggerStep TriggerStep; typedef struct UnpackedRecord UnpackedRecord; +typedef struct Upsert Upsert; typedef struct VTable VTable; typedef struct VtabCtx VtabCtx; typedef struct Walker Walker; @@ -12394,6 +14143,7 @@ SQLITE_PRIVATE int sqlite3BtreeCursor( struct KeyInfo*, /* First argument to compare function */ BtCursor *pCursor /* Space to write cursor structure */ ); +SQLITE_PRIVATE BtCursor *sqlite3BtreeFakeValidCursor(void); SQLITE_PRIVATE int sqlite3BtreeCursorSize(void); SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor*); SQLITE_PRIVATE void sqlite3BtreeCursorHintFlags(BtCursor*, unsigned); @@ -12422,13 +14172,28 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*, u8 flags); ** entry in either an index or table btree. ** ** Index btrees (used for indexes and also WITHOUT ROWID tables) contain -** an arbitrary key and no data. These btrees have pKey,nKey set to their -** key and pData,nData,nZero set to zero. +** an arbitrary key and no data. These btrees have pKey,nKey set to the +** key and the pData,nData,nZero fields are uninitialized. The aMem,nMem +** fields give an array of Mem objects that are a decomposition of the key. +** The nMem field might be zero, indicating that no decomposition is available. ** ** Table btrees (used for rowid tables) contain an integer rowid used as ** the key and passed in the nKey field. The pKey field is zero. ** pData,nData hold the content of the new entry. nZero extra zero bytes ** are appended to the end of the content when constructing the entry. +** The aMem,nMem fields are uninitialized for table btrees. +** +** Field usage summary: +** +** Table BTrees Index Btrees +** +** pKey always NULL encoded key +** nKey the ROWID length of pKey +** pData data not used +** aMem not used decomposed key value +** nMem not used entries in aMem +** nData length of pData not used +** nZero extra zeros after pData not used ** ** This object is used to pass information into sqlite3BtreeInsert(). The ** same information used to be passed as five separate parameters. But placing @@ -12439,8 +14204,8 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor*, u8 flags); struct BtreePayload { const void *pKey; /* Key content for indexes. NULL for tables */ sqlite3_int64 nKey; /* Size of pKey for indexes. PRIMARY KEY for tabs */ - const void *pData; /* Data for tables. NULL for indexes */ - struct Mem *aMem; /* First of nMem value in the unpacked pKey */ + const void *pData; /* Data for tables. */ + sqlite3_value *aMem; /* First of nMem value in the unpacked pKey */ u16 nMem; /* Number of aMem[] value. Might be zero */ int nData; /* Size of pData. 0 if none. */ int nZero; /* Extra zero data appended after pData,nData */ @@ -12450,16 +14215,20 @@ SQLITE_PRIVATE int sqlite3BtreeInsert(BtCursor*, const BtreePayload *pPayload, int flags, int seekResult); SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor*, int *pRes); SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor*, int *pRes); -SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int *pRes); +SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor*, int flags); SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor*); -SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int *pRes); +SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor*, int flags); SQLITE_PRIVATE i64 sqlite3BtreeIntegerKey(BtCursor*); +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC +SQLITE_PRIVATE i64 sqlite3BtreeOffset(BtCursor*); +#endif SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor*, u32 offset, u32 amt, void*); SQLITE_PRIVATE const void *sqlite3BtreePayloadFetch(BtCursor*, u32 *pAmt); SQLITE_PRIVATE u32 sqlite3BtreePayloadSize(BtCursor*); SQLITE_PRIVATE char *sqlite3BtreeIntegrityCheck(Btree*, int *aRoot, int nRoot, int, int*); SQLITE_PRIVATE struct Pager *sqlite3BtreePager(Btree*); +SQLITE_PRIVATE i64 sqlite3BtreeRowCountEst(BtCursor*); #ifndef SQLITE_OMIT_INCRBLOB SQLITE_PRIVATE int sqlite3BtreePayloadChecked(BtCursor*, u32 offset, u32 amt, void*); @@ -12569,7 +14338,7 @@ typedef struct Vdbe Vdbe; ** The names of the following types declared in vdbeInt.h are required ** for the VdbeOp definition. */ -typedef struct Mem Mem; +typedef struct sqlite3_value Mem; typedef struct SubProgram SubProgram; /* @@ -12602,7 +14371,7 @@ struct VdbeOp { #ifdef SQLITE_ENABLE_CURSOR_HINTS Expr *pExpr; /* Used when p4type is P4_EXPR */ #endif - int (*xAdvance)(BtCursor *, int *); + int (*xAdvance)(BtCursor *, int); } p4; #ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS char *zComment; /* Comment to improve readability */ @@ -12626,6 +14395,7 @@ struct SubProgram { int nOp; /* Elements in aOp[] */ int nMem; /* Number of memory cells required */ int nCsr; /* Number of cursors required */ + u8 *aOnce; /* Array of OP_Once flags */ void *token; /* id that may be used to recursive triggers */ SubProgram *pNext; /* Next sub-program already visited */ }; @@ -12645,24 +14415,27 @@ typedef struct VdbeOpList VdbeOpList; /* ** Allowed values of VdbeOp.p4type */ -#define P4_NOTUSED 0 /* The P4 parameter is not used */ -#define P4_DYNAMIC (-1) /* Pointer to a string obtained from sqliteMalloc() */ -#define P4_STATIC (-2) /* Pointer to a static string */ -#define P4_COLLSEQ (-3) /* P4 is a pointer to a CollSeq structure */ -#define P4_FUNCDEF (-4) /* P4 is a pointer to a FuncDef structure */ -#define P4_KEYINFO (-5) /* P4 is a pointer to a KeyInfo structure */ -#define P4_EXPR (-6) /* P4 is a pointer to an Expr tree */ -#define P4_MEM (-7) /* P4 is a pointer to a Mem* structure */ -#define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */ -#define P4_VTAB (-8) /* P4 is a pointer to an sqlite3_vtab structure */ -#define P4_REAL (-9) /* P4 is a 64-bit floating point value */ -#define P4_INT64 (-10) /* P4 is a 64-bit signed integer */ -#define P4_INT32 (-11) /* P4 is a 32-bit signed integer */ -#define P4_INTARRAY (-12) /* P4 is a vector of 32-bit integers */ -#define P4_SUBPROGRAM (-13) /* P4 is a pointer to a SubProgram structure */ -#define P4_ADVANCE (-14) /* P4 is a pointer to BtreeNext() or BtreePrev() */ -#define P4_TABLE (-15) /* P4 is a pointer to a Table structure */ -#define P4_FUNCCTX (-16) /* P4 is a pointer to an sqlite3_context object */ +#define P4_NOTUSED 0 /* The P4 parameter is not used */ +#define P4_TRANSIENT 0 /* P4 is a pointer to a transient string */ +#define P4_STATIC (-1) /* Pointer to a static string */ +#define P4_COLLSEQ (-2) /* P4 is a pointer to a CollSeq structure */ +#define P4_INT32 (-3) /* P4 is a 32-bit signed integer */ +#define P4_SUBPROGRAM (-4) /* P4 is a pointer to a SubProgram structure */ +#define P4_ADVANCE (-5) /* P4 is a pointer to BtreeNext() or BtreePrev() */ +#define P4_TABLE (-6) /* P4 is a pointer to a Table structure */ +/* Above do not own any resources. Must free those below */ +#define P4_FREE_IF_LE (-7) +#define P4_DYNAMIC (-7) /* Pointer to memory from sqliteMalloc() */ +#define P4_FUNCDEF (-8) /* P4 is a pointer to a FuncDef structure */ +#define P4_KEYINFO (-9) /* P4 is a pointer to a KeyInfo structure */ +#define P4_EXPR (-10) /* P4 is a pointer to an Expr tree */ +#define P4_MEM (-11) /* P4 is a pointer to a Mem* structure */ +#define P4_VTAB (-12) /* P4 is a pointer to an sqlite3_vtab structure */ +#define P4_REAL (-13) /* P4 is a 64-bit floating point value */ +#define P4_INT64 (-14) /* P4 is a 64-bit signed integer */ +#define P4_INTARRAY (-15) /* P4 is a vector of 32-bit integers */ +#define P4_FUNCCTX (-16) /* P4 is a pointer to an sqlite3_context object */ +#define P4_DYNBLOB (-17) /* Pointer to memory from sqliteMalloc() */ /* Error message codes for OP_Halt */ #define P5_ConstraintNotNull 1 @@ -12708,165 +14481,175 @@ typedef struct VdbeOpList VdbeOpList; #define OP_Savepoint 0 #define OP_AutoCommit 1 #define OP_Transaction 2 -#define OP_SorterNext 3 -#define OP_PrevIfOpen 4 -#define OP_NextIfOpen 5 -#define OP_Prev 6 -#define OP_Next 7 +#define OP_SorterNext 3 /* jump */ +#define OP_PrevIfOpen 4 /* jump */ +#define OP_NextIfOpen 5 /* jump */ +#define OP_Prev 6 /* jump */ +#define OP_Next 7 /* jump */ #define OP_Checkpoint 8 #define OP_JournalMode 9 #define OP_Vacuum 10 -#define OP_VFilter 11 /* synopsis: iplan=r[P3] zplan='P4' */ +#define OP_VFilter 11 /* jump, synopsis: iplan=r[P3] zplan='P4' */ #define OP_VUpdate 12 /* synopsis: data=r[P3@P2] */ -#define OP_Goto 13 -#define OP_Gosub 14 -#define OP_InitCoroutine 15 -#define OP_Yield 16 -#define OP_MustBeInt 17 -#define OP_Jump 18 +#define OP_Goto 13 /* jump */ +#define OP_Gosub 14 /* jump */ +#define OP_InitCoroutine 15 /* jump */ +#define OP_Yield 16 /* jump */ +#define OP_MustBeInt 17 /* jump */ +#define OP_Jump 18 /* jump */ #define OP_Not 19 /* same as TK_NOT, synopsis: r[P2]= !r[P1] */ -#define OP_Once 20 -#define OP_If 21 -#define OP_IfNot 22 -#define OP_SeekLT 23 /* synopsis: key=r[P3@P4] */ -#define OP_SeekLE 24 /* synopsis: key=r[P3@P4] */ -#define OP_SeekGE 25 /* synopsis: key=r[P3@P4] */ -#define OP_SeekGT 26 /* synopsis: key=r[P3@P4] */ -#define OP_Or 27 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */ -#define OP_And 28 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */ -#define OP_NoConflict 29 /* synopsis: key=r[P3@P4] */ -#define OP_NotFound 30 /* synopsis: key=r[P3@P4] */ -#define OP_Found 31 /* synopsis: key=r[P3@P4] */ -#define OP_SeekRowid 32 /* synopsis: intkey=r[P3] */ -#define OP_NotExists 33 /* synopsis: intkey=r[P3] */ -#define OP_IsNull 34 /* same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */ -#define OP_NotNull 35 /* same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */ -#define OP_Ne 36 /* same as TK_NE, synopsis: IF r[P3]!=r[P1] */ -#define OP_Eq 37 /* same as TK_EQ, synopsis: IF r[P3]==r[P1] */ -#define OP_Gt 38 /* same as TK_GT, synopsis: IF r[P3]>r[P1] */ -#define OP_Le 39 /* same as TK_LE, synopsis: IF r[P3]<=r[P1] */ -#define OP_Lt 40 /* same as TK_LT, synopsis: IF r[P3]<r[P1] */ -#define OP_Ge 41 /* same as TK_GE, synopsis: IF r[P3]>=r[P1] */ -#define OP_ElseNotEq 42 /* same as TK_ESCAPE */ -#define OP_BitAnd 43 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */ -#define OP_BitOr 44 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */ -#define OP_ShiftLeft 45 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */ -#define OP_ShiftRight 46 /* same as TK_RSHIFT, synopsis: r[P3]=r[P2]>>r[P1] */ -#define OP_Add 47 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */ -#define OP_Subtract 48 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */ -#define OP_Multiply 49 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */ -#define OP_Divide 50 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */ -#define OP_Remainder 51 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */ -#define OP_Concat 52 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */ -#define OP_Last 53 -#define OP_BitNot 54 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */ -#define OP_SorterSort 55 -#define OP_Sort 56 -#define OP_Rewind 57 -#define OP_IdxLE 58 /* synopsis: key=r[P3@P4] */ -#define OP_IdxGT 59 /* synopsis: key=r[P3@P4] */ -#define OP_IdxLT 60 /* synopsis: key=r[P3@P4] */ -#define OP_IdxGE 61 /* synopsis: key=r[P3@P4] */ -#define OP_RowSetRead 62 /* synopsis: r[P3]=rowset(P1) */ -#define OP_RowSetTest 63 /* synopsis: if r[P3] in rowset(P1) goto P2 */ -#define OP_Program 64 -#define OP_FkIfZero 65 /* synopsis: if fkctr[P1]==0 goto P2 */ -#define OP_IfPos 66 /* synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */ -#define OP_IfNotZero 67 /* synopsis: if r[P1]!=0 then r[P1]--, goto P2 */ -#define OP_DecrJumpZero 68 /* synopsis: if (--r[P1])==0 goto P2 */ -#define OP_IncrVacuum 69 -#define OP_VNext 70 -#define OP_Init 71 /* synopsis: Start at P2 */ -#define OP_Return 72 -#define OP_EndCoroutine 73 -#define OP_HaltIfNull 74 /* synopsis: if r[P3]=null halt */ -#define OP_Halt 75 -#define OP_Integer 76 /* synopsis: r[P2]=P1 */ -#define OP_Int64 77 /* synopsis: r[P2]=P4 */ -#define OP_String 78 /* synopsis: r[P2]='P4' (len=P1) */ -#define OP_Null 79 /* synopsis: r[P2..P3]=NULL */ -#define OP_SoftNull 80 /* synopsis: r[P1]=NULL */ -#define OP_Blob 81 /* synopsis: r[P2]=P4 (len=P1) */ -#define OP_Variable 82 /* synopsis: r[P2]=parameter(P1,P4) */ -#define OP_Move 83 /* synopsis: r[P2@P3]=r[P1@P3] */ -#define OP_Copy 84 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */ -#define OP_SCopy 85 /* synopsis: r[P2]=r[P1] */ -#define OP_IntCopy 86 /* synopsis: r[P2]=r[P1] */ -#define OP_ResultRow 87 /* synopsis: output=r[P1@P2] */ -#define OP_CollSeq 88 -#define OP_Function0 89 /* synopsis: r[P3]=func(r[P2@P5]) */ -#define OP_Function 90 /* synopsis: r[P3]=func(r[P2@P5]) */ -#define OP_AddImm 91 /* synopsis: r[P1]=r[P1]+P2 */ -#define OP_RealAffinity 92 -#define OP_Cast 93 /* synopsis: affinity(r[P1]) */ -#define OP_Permutation 94 -#define OP_Compare 95 /* synopsis: r[P1@P3] <-> r[P2@P3] */ -#define OP_Column 96 /* synopsis: r[P3]=PX */ -#define OP_String8 97 /* same as TK_STRING, synopsis: r[P2]='P4' */ -#define OP_Affinity 98 /* synopsis: affinity(r[P1@P2]) */ -#define OP_MakeRecord 99 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ -#define OP_Count 100 /* synopsis: r[P2]=count() */ -#define OP_ReadCookie 101 -#define OP_SetCookie 102 -#define OP_ReopenIdx 103 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenRead 104 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenWrite 105 /* synopsis: root=P2 iDb=P3 */ -#define OP_OpenAutoindex 106 /* synopsis: nColumn=P2 */ -#define OP_OpenEphemeral 107 /* synopsis: nColumn=P2 */ -#define OP_SorterOpen 108 -#define OP_SequenceTest 109 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */ -#define OP_OpenPseudo 110 /* synopsis: P3 columns in r[P2] */ -#define OP_Close 111 -#define OP_ColumnsUsed 112 -#define OP_Sequence 113 /* synopsis: r[P2]=cursor[P1].ctr++ */ -#define OP_NewRowid 114 /* synopsis: r[P2]=rowid */ -#define OP_Insert 115 /* synopsis: intkey=r[P3] data=r[P2] */ -#define OP_InsertInt 116 /* synopsis: intkey=P3 data=r[P2] */ -#define OP_Delete 117 -#define OP_ResetCount 118 -#define OP_SorterCompare 119 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */ -#define OP_SorterData 120 /* synopsis: r[P2]=data */ -#define OP_RowData 121 /* synopsis: r[P2]=data */ -#define OP_Rowid 122 /* synopsis: r[P2]=rowid */ -#define OP_NullRow 123 -#define OP_SorterInsert 124 /* synopsis: key=r[P2] */ -#define OP_IdxInsert 125 /* synopsis: key=r[P2] */ -#define OP_IdxDelete 126 /* synopsis: key=r[P2@P3] */ -#define OP_Seek 127 /* synopsis: Move P3 to P1.rowid */ -#define OP_IdxRowid 128 /* synopsis: r[P2]=rowid */ -#define OP_Destroy 129 -#define OP_Clear 130 -#define OP_ResetSorter 131 -#define OP_Real 132 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ -#define OP_CreateIndex 133 /* synopsis: r[P2]=root iDb=P1 */ -#define OP_CreateTable 134 /* synopsis: r[P2]=root iDb=P1 */ -#define OP_ParseSchema 135 -#define OP_LoadAnalysis 136 -#define OP_DropTable 137 -#define OP_DropIndex 138 -#define OP_DropTrigger 139 -#define OP_IntegrityCk 140 -#define OP_RowSetAdd 141 /* synopsis: rowset(P1)=r[P2] */ -#define OP_Param 142 -#define OP_FkCounter 143 /* synopsis: fkctr[P1]+=P2 */ -#define OP_MemMax 144 /* synopsis: r[P1]=max(r[P1],r[P2]) */ -#define OP_OffsetLimit 145 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */ -#define OP_AggStep0 146 /* synopsis: accum=r[P3] step(r[P2@P5]) */ -#define OP_AggStep 147 /* synopsis: accum=r[P3] step(r[P2@P5]) */ -#define OP_AggFinal 148 /* synopsis: accum=r[P1] N=P2 */ -#define OP_Expire 149 -#define OP_TableLock 150 /* synopsis: iDb=P1 root=P2 write=P3 */ -#define OP_VBegin 151 -#define OP_VCreate 152 -#define OP_VDestroy 153 -#define OP_VOpen 154 -#define OP_VColumn 155 /* synopsis: r[P3]=vcolumn(P2) */ -#define OP_VRename 156 -#define OP_Pagecount 157 -#define OP_MaxPgcnt 158 -#define OP_CursorHint 159 -#define OP_Noop 160 -#define OP_Explain 161 +#define OP_Once 20 /* jump */ +#define OP_If 21 /* jump */ +#define OP_IfNot 22 /* jump */ +#define OP_IfNullRow 23 /* jump, synopsis: if P1.nullRow then r[P3]=NULL, goto P2 */ +#define OP_SeekLT 24 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekLE 25 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekGE 26 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekGT 27 /* jump, synopsis: key=r[P3@P4] */ +#define OP_NoConflict 28 /* jump, synopsis: key=r[P3@P4] */ +#define OP_NotFound 29 /* jump, synopsis: key=r[P3@P4] */ +#define OP_Found 30 /* jump, synopsis: key=r[P3@P4] */ +#define OP_SeekRowid 31 /* jump, synopsis: intkey=r[P3] */ +#define OP_NotExists 32 /* jump, synopsis: intkey=r[P3] */ +#define OP_Last 33 /* jump */ +#define OP_IfSmaller 34 /* jump */ +#define OP_SorterSort 35 /* jump */ +#define OP_Sort 36 /* jump */ +#define OP_Rewind 37 /* jump */ +#define OP_IdxLE 38 /* jump, synopsis: key=r[P3@P4] */ +#define OP_IdxGT 39 /* jump, synopsis: key=r[P3@P4] */ +#define OP_IdxLT 40 /* jump, synopsis: key=r[P3@P4] */ +#define OP_IdxGE 41 /* jump, synopsis: key=r[P3@P4] */ +#define OP_RowSetRead 42 /* jump, synopsis: r[P3]=rowset(P1) */ +#define OP_Or 43 /* same as TK_OR, synopsis: r[P3]=(r[P1] || r[P2]) */ +#define OP_And 44 /* same as TK_AND, synopsis: r[P3]=(r[P1] && r[P2]) */ +#define OP_RowSetTest 45 /* jump, synopsis: if r[P3] in rowset(P1) goto P2 */ +#define OP_Program 46 /* jump */ +#define OP_FkIfZero 47 /* jump, synopsis: if fkctr[P1]==0 goto P2 */ +#define OP_IfPos 48 /* jump, synopsis: if r[P1]>0 then r[P1]-=P3, goto P2 */ +#define OP_IfNotZero 49 /* jump, synopsis: if r[P1]!=0 then r[P1]--, goto P2 */ +#define OP_IsNull 50 /* jump, same as TK_ISNULL, synopsis: if r[P1]==NULL goto P2 */ +#define OP_NotNull 51 /* jump, same as TK_NOTNULL, synopsis: if r[P1]!=NULL goto P2 */ +#define OP_Ne 52 /* jump, same as TK_NE, synopsis: IF r[P3]!=r[P1] */ +#define OP_Eq 53 /* jump, same as TK_EQ, synopsis: IF r[P3]==r[P1] */ +#define OP_Gt 54 /* jump, same as TK_GT, synopsis: IF r[P3]>r[P1] */ +#define OP_Le 55 /* jump, same as TK_LE, synopsis: IF r[P3]<=r[P1] */ +#define OP_Lt 56 /* jump, same as TK_LT, synopsis: IF r[P3]<r[P1] */ +#define OP_Ge 57 /* jump, same as TK_GE, synopsis: IF r[P3]>=r[P1] */ +#define OP_ElseNotEq 58 /* jump, same as TK_ESCAPE */ +#define OP_DecrJumpZero 59 /* jump, synopsis: if (--r[P1])==0 goto P2 */ +#define OP_IncrVacuum 60 /* jump */ +#define OP_VNext 61 /* jump */ +#define OP_Init 62 /* jump, synopsis: Start at P2 */ +#define OP_Return 63 +#define OP_EndCoroutine 64 +#define OP_HaltIfNull 65 /* synopsis: if r[P3]=null halt */ +#define OP_Halt 66 +#define OP_Integer 67 /* synopsis: r[P2]=P1 */ +#define OP_Int64 68 /* synopsis: r[P2]=P4 */ +#define OP_String 69 /* synopsis: r[P2]='P4' (len=P1) */ +#define OP_Null 70 /* synopsis: r[P2..P3]=NULL */ +#define OP_SoftNull 71 /* synopsis: r[P1]=NULL */ +#define OP_Blob 72 /* synopsis: r[P2]=P4 (len=P1) */ +#define OP_Variable 73 /* synopsis: r[P2]=parameter(P1,P4) */ +#define OP_Move 74 /* synopsis: r[P2@P3]=r[P1@P3] */ +#define OP_Copy 75 /* synopsis: r[P2@P3+1]=r[P1@P3+1] */ +#define OP_SCopy 76 /* synopsis: r[P2]=r[P1] */ +#define OP_IntCopy 77 /* synopsis: r[P2]=r[P1] */ +#define OP_ResultRow 78 /* synopsis: output=r[P1@P2] */ +#define OP_CollSeq 79 +#define OP_AddImm 80 /* synopsis: r[P1]=r[P1]+P2 */ +#define OP_RealAffinity 81 +#define OP_Cast 82 /* synopsis: affinity(r[P1]) */ +#define OP_Permutation 83 +#define OP_Compare 84 /* synopsis: r[P1@P3] <-> r[P2@P3] */ +#define OP_BitAnd 85 /* same as TK_BITAND, synopsis: r[P3]=r[P1]&r[P2] */ +#define OP_BitOr 86 /* same as TK_BITOR, synopsis: r[P3]=r[P1]|r[P2] */ +#define OP_ShiftLeft 87 /* same as TK_LSHIFT, synopsis: r[P3]=r[P2]<<r[P1] */ +#define OP_ShiftRight 88 /* same as TK_RSHIFT, synopsis: r[P3]=r[P2]>>r[P1] */ +#define OP_Add 89 /* same as TK_PLUS, synopsis: r[P3]=r[P1]+r[P2] */ +#define OP_Subtract 90 /* same as TK_MINUS, synopsis: r[P3]=r[P2]-r[P1] */ +#define OP_Multiply 91 /* same as TK_STAR, synopsis: r[P3]=r[P1]*r[P2] */ +#define OP_Divide 92 /* same as TK_SLASH, synopsis: r[P3]=r[P2]/r[P1] */ +#define OP_Remainder 93 /* same as TK_REM, synopsis: r[P3]=r[P2]%r[P1] */ +#define OP_Concat 94 /* same as TK_CONCAT, synopsis: r[P3]=r[P2]+r[P1] */ +#define OP_IsTrue 95 /* synopsis: r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4 */ +#define OP_BitNot 96 /* same as TK_BITNOT, synopsis: r[P1]= ~r[P1] */ +#define OP_Offset 97 /* synopsis: r[P3] = sqlite_offset(P1) */ +#define OP_Column 98 /* synopsis: r[P3]=PX */ +#define OP_String8 99 /* same as TK_STRING, synopsis: r[P2]='P4' */ +#define OP_Affinity 100 /* synopsis: affinity(r[P1@P2]) */ +#define OP_MakeRecord 101 /* synopsis: r[P3]=mkrec(r[P1@P2]) */ +#define OP_Count 102 /* synopsis: r[P2]=count() */ +#define OP_ReadCookie 103 +#define OP_SetCookie 104 +#define OP_ReopenIdx 105 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenRead 106 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenWrite 107 /* synopsis: root=P2 iDb=P3 */ +#define OP_OpenDup 108 +#define OP_OpenAutoindex 109 /* synopsis: nColumn=P2 */ +#define OP_OpenEphemeral 110 /* synopsis: nColumn=P2 */ +#define OP_SorterOpen 111 +#define OP_SequenceTest 112 /* synopsis: if( cursor[P1].ctr++ ) pc = P2 */ +#define OP_OpenPseudo 113 /* synopsis: P3 columns in r[P2] */ +#define OP_Close 114 +#define OP_ColumnsUsed 115 +#define OP_Sequence 116 /* synopsis: r[P2]=cursor[P1].ctr++ */ +#define OP_NewRowid 117 /* synopsis: r[P2]=rowid */ +#define OP_Insert 118 /* synopsis: intkey=r[P3] data=r[P2] */ +#define OP_InsertInt 119 /* synopsis: intkey=P3 data=r[P2] */ +#define OP_Delete 120 +#define OP_ResetCount 121 +#define OP_SorterCompare 122 /* synopsis: if key(P1)!=trim(r[P3],P4) goto P2 */ +#define OP_SorterData 123 /* synopsis: r[P2]=data */ +#define OP_RowData 124 /* synopsis: r[P2]=data */ +#define OP_Rowid 125 /* synopsis: r[P2]=rowid */ +#define OP_NullRow 126 +#define OP_SeekEnd 127 +#define OP_SorterInsert 128 /* synopsis: key=r[P2] */ +#define OP_IdxInsert 129 /* synopsis: key=r[P2] */ +#define OP_IdxDelete 130 /* synopsis: key=r[P2@P3] */ +#define OP_DeferredSeek 131 /* synopsis: Move P3 to P1.rowid if needed */ +#define OP_IdxRowid 132 /* synopsis: r[P2]=rowid */ +#define OP_Destroy 133 +#define OP_Real 134 /* same as TK_FLOAT, synopsis: r[P2]=P4 */ +#define OP_Clear 135 +#define OP_ResetSorter 136 +#define OP_CreateBtree 137 /* synopsis: r[P2]=root iDb=P1 flags=P3 */ +#define OP_SqlExec 138 +#define OP_ParseSchema 139 +#define OP_LoadAnalysis 140 +#define OP_DropTable 141 +#define OP_DropIndex 142 +#define OP_DropTrigger 143 +#define OP_IntegrityCk 144 +#define OP_RowSetAdd 145 /* synopsis: rowset(P1)=r[P2] */ +#define OP_Param 146 +#define OP_FkCounter 147 /* synopsis: fkctr[P1]+=P2 */ +#define OP_MemMax 148 /* synopsis: r[P1]=max(r[P1],r[P2]) */ +#define OP_OffsetLimit 149 /* synopsis: if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1) */ +#define OP_AggStep0 150 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_AggStep 151 /* synopsis: accum=r[P3] step(r[P2@P5]) */ +#define OP_AggFinal 152 /* synopsis: accum=r[P1] N=P2 */ +#define OP_Expire 153 +#define OP_TableLock 154 /* synopsis: iDb=P1 root=P2 write=P3 */ +#define OP_VBegin 155 +#define OP_VCreate 156 +#define OP_VDestroy 157 +#define OP_VOpen 158 +#define OP_VColumn 159 /* synopsis: r[P3]=vcolumn(P2) */ +#define OP_VRename 160 +#define OP_Pagecount 161 +#define OP_MaxPgcnt 162 +#define OP_PureFunc0 163 +#define OP_Function0 164 /* synopsis: r[P3]=func(r[P2@P5]) */ +#define OP_PureFunc 165 +#define OP_Function 166 /* synopsis: r[P3]=func(r[P2@P5]) */ +#define OP_Trace 167 +#define OP_CursorHint 168 +#define OP_Noop 169 +#define OP_Explain 170 +#define OP_Abortable 171 /* Properties such as "out2" or "jump" that are specified in ** comments following the "case" for each opcode in the vdbe.c @@ -12881,25 +14664,26 @@ typedef struct VdbeOpList VdbeOpList; #define OPFLG_INITIALIZER {\ /* 0 */ 0x00, 0x00, 0x00, 0x01, 0x01, 0x01, 0x01, 0x01,\ /* 8 */ 0x00, 0x10, 0x00, 0x01, 0x00, 0x01, 0x01, 0x01,\ -/* 16 */ 0x03, 0x03, 0x01, 0x12, 0x01, 0x03, 0x03, 0x09,\ -/* 24 */ 0x09, 0x09, 0x09, 0x26, 0x26, 0x09, 0x09, 0x09,\ -/* 32 */ 0x09, 0x09, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\ -/* 40 */ 0x0b, 0x0b, 0x01, 0x26, 0x26, 0x26, 0x26, 0x26,\ -/* 48 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x01, 0x12, 0x01,\ -/* 56 */ 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x23, 0x0b,\ -/* 64 */ 0x01, 0x01, 0x03, 0x03, 0x03, 0x01, 0x01, 0x01,\ -/* 72 */ 0x02, 0x02, 0x08, 0x00, 0x10, 0x10, 0x10, 0x10,\ -/* 80 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00,\ -/* 88 */ 0x00, 0x00, 0x00, 0x02, 0x02, 0x02, 0x00, 0x00,\ -/* 96 */ 0x00, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\ +/* 16 */ 0x03, 0x03, 0x01, 0x12, 0x01, 0x03, 0x03, 0x01,\ +/* 24 */ 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09, 0x09,\ +/* 32 */ 0x09, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01, 0x01,\ +/* 40 */ 0x01, 0x01, 0x23, 0x26, 0x26, 0x0b, 0x01, 0x01,\ +/* 48 */ 0x03, 0x03, 0x03, 0x03, 0x0b, 0x0b, 0x0b, 0x0b,\ +/* 56 */ 0x0b, 0x0b, 0x01, 0x03, 0x01, 0x01, 0x01, 0x02,\ +/* 64 */ 0x02, 0x08, 0x00, 0x10, 0x10, 0x10, 0x10, 0x00,\ +/* 72 */ 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\ +/* 80 */ 0x02, 0x02, 0x02, 0x00, 0x00, 0x26, 0x26, 0x26,\ +/* 88 */ 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x26, 0x12,\ +/* 96 */ 0x12, 0x20, 0x00, 0x10, 0x00, 0x00, 0x10, 0x10,\ /* 104 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 112 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 120 */ 0x00, 0x00, 0x10, 0x00, 0x04, 0x04, 0x00, 0x00,\ -/* 128 */ 0x10, 0x10, 0x00, 0x00, 0x10, 0x10, 0x10, 0x00,\ -/* 136 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x06, 0x10, 0x00,\ -/* 144 */ 0x04, 0x1a, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ -/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00,\ -/* 160 */ 0x00, 0x00,} +/* 112 */ 0x00, 0x00, 0x00, 0x00, 0x10, 0x10, 0x00, 0x00,\ +/* 120 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x10, 0x00, 0x00,\ +/* 128 */ 0x04, 0x04, 0x00, 0x00, 0x10, 0x10, 0x10, 0x00,\ +/* 136 */ 0x00, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 144 */ 0x00, 0x06, 0x10, 0x00, 0x04, 0x1a, 0x00, 0x00,\ +/* 152 */ 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 160 */ 0x00, 0x10, 0x10, 0x00, 0x00, 0x00, 0x00, 0x00,\ +/* 168 */ 0x00, 0x00, 0x00, 0x00,} /* The sqlite3P2Values() routine is able to run faster if it knows ** the value of the largest JUMP opcode. The smaller the maximum @@ -12907,12 +14691,18 @@ typedef struct VdbeOpList VdbeOpList; ** generated this include file strives to group all JUMP opcodes ** together near the beginning of the list. */ -#define SQLITE_MX_JUMP_OPCODE 71 /* Maximum JUMP opcode */ +#define SQLITE_MX_JUMP_OPCODE 62 /* Maximum JUMP opcode */ /************** End of opcodes.h *********************************************/ /************** Continuing where we left off in vdbe.h ***********************/ /* +** Additional non-public SQLITE_PREPARE_* flags +*/ +#define SQLITE_PREPARE_SAVESQL 0x80 /* Preserve SQL text */ +#define SQLITE_PREPARE_MASK 0x0f /* Mask of public flags */ + +/* ** Prototypes for the VDBE interface. See comments on the implementation ** for a description of what each of these routines does. */ @@ -12935,7 +14725,24 @@ SQLITE_PRIVATE void sqlite3VdbeVerifyNoResultRow(Vdbe *p); # define sqlite3VdbeVerifyNoMallocRequired(A,B) # define sqlite3VdbeVerifyNoResultRow(A) #endif -SQLITE_PRIVATE VdbeOp *sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp, int iLineno); +#if defined(SQLITE_DEBUG) +SQLITE_PRIVATE void sqlite3VdbeVerifyAbortable(Vdbe *p, int); +#else +# define sqlite3VdbeVerifyAbortable(A,B) +#endif +SQLITE_PRIVATE VdbeOp *sqlite3VdbeAddOpList(Vdbe*, int nOp, VdbeOpList const *aOp,int iLineno); +#ifndef SQLITE_OMIT_EXPLAIN +SQLITE_PRIVATE void sqlite3VdbeExplain(Parse*,u8,const char*,...); +SQLITE_PRIVATE void sqlite3VdbeExplainPop(Parse*); +SQLITE_PRIVATE int sqlite3VdbeExplainParent(Parse*); +# define ExplainQueryPlan(P) sqlite3VdbeExplain P +# define ExplainQueryPlanPop(P) sqlite3VdbeExplainPop(P) +# define ExplainQueryPlanParent(P) sqlite3VdbeExplainParent(P) +#else +# define ExplainQueryPlan(P) +# define ExplainQueryPlanPop(P) +# define ExplainQueryPlanParent(P) 0 +#endif SQLITE_PRIVATE void sqlite3VdbeAddParseSchemaOp(Vdbe*,int,char*); SQLITE_PRIVATE void sqlite3VdbeChangeOpcode(Vdbe*, u32 addr, u8); SQLITE_PRIVATE void sqlite3VdbeChangeP1(Vdbe*, u32 addr, int P1); @@ -12958,6 +14765,9 @@ SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3*,Vdbe*); SQLITE_PRIVATE void sqlite3VdbeMakeReady(Vdbe*,Parse*); SQLITE_PRIVATE int sqlite3VdbeFinalize(Vdbe*); SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe*, int); +#ifdef SQLITE_COVERAGE_TEST +SQLITE_PRIVATE int sqlite3VdbeLabelHasBeenResolved(Vdbe*,int); +#endif SQLITE_PRIVATE int sqlite3VdbeCurrentAddr(Vdbe*); #ifdef SQLITE_DEBUG SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *, int); @@ -12969,7 +14779,8 @@ SQLITE_PRIVATE void sqlite3VdbeSetNumCols(Vdbe*,int); SQLITE_PRIVATE int sqlite3VdbeSetColName(Vdbe*, int, int, const char *, void(*)(void*)); SQLITE_PRIVATE void sqlite3VdbeCountChanges(Vdbe*); SQLITE_PRIVATE sqlite3 *sqlite3VdbeDb(Vdbe*); -SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, int); +SQLITE_PRIVATE u8 sqlite3VdbePrepareFlags(Vdbe*); +SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe*, const char *z, int n, u8); SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe*,Vdbe*); SQLITE_PRIVATE VdbeOp *sqlite3VdbeTakeOpArray(Vdbe*, int*, int*); SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetBoundValue(Vdbe*, int, u8); @@ -12991,6 +14802,8 @@ SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord*); SQLITE_PRIVATE void sqlite3VdbeLinkSubProgram(Vdbe *, SubProgram *); #endif +SQLITE_PRIVATE int sqlite3NotPureFunc(sqlite3_context*); + /* Use SQLITE_ENABLE_COMMENTS to enable generation of extra comments on ** each VDBE opcode. ** @@ -13191,7 +15004,7 @@ SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3*); SQLITE_PRIVATE int sqlite3PagerReadFileheader(Pager*, int, unsigned char*); /* Functions used to configure a Pager object. */ -SQLITE_PRIVATE void sqlite3PagerSetBusyhandler(Pager*, int(*)(void *), void *); +SQLITE_PRIVATE void sqlite3PagerSetBusyHandler(Pager*, int(*)(void *), void *); SQLITE_PRIVATE int sqlite3PagerSetPagesize(Pager*, u32*, int); #ifdef SQLITE_HAS_CODEC SQLITE_PRIVATE void sqlite3PagerAlignReserve(Pager*,Pager*); @@ -13216,6 +15029,7 @@ SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno); SQLITE_PRIVATE void sqlite3PagerRef(DbPage*); SQLITE_PRIVATE void sqlite3PagerUnref(DbPage*); SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage*); +SQLITE_PRIVATE void sqlite3PagerUnrefPageOne(DbPage*); /* Operations on page references. */ SQLITE_PRIVATE int sqlite3PagerWrite(DbPage*); @@ -13276,6 +15090,11 @@ SQLITE_PRIVATE int sqlite3PagerIsMemdb(Pager*); SQLITE_PRIVATE void sqlite3PagerCacheStat(Pager *, int, int, int *); SQLITE_PRIVATE void sqlite3PagerClearCache(Pager*); SQLITE_PRIVATE int sqlite3SectorSize(sqlite3_file *); +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT +SQLITE_PRIVATE void sqlite3PagerResetLockTimeout(Pager *pPager); +#else +# define sqlite3PagerResetLockTimeout(X) +#endif /* Functions used to truncate the database file. */ SQLITE_PRIVATE void sqlite3PagerTruncateImage(Pager*,Pgno); @@ -13335,6 +15154,7 @@ struct PgHdr { sqlite3_pcache_page *pPage; /* Pcache object page handle */ void *pData; /* Page data */ void *pExtra; /* Extra content */ + PCache *pCache; /* PRIVATE: Cache that owns this page */ PgHdr *pDirty; /* Transient list of dirty sorted by pgno */ Pager *pPager; /* The pager this page is part of */ Pgno pgno; /* Page number for this page */ @@ -13344,14 +15164,15 @@ struct PgHdr { u16 flags; /* PGHDR flags defined below */ /********************************************************************** - ** Elements above are public. All that follows is private to pcache.c - ** and should not be accessed by other modules. + ** Elements above, except pCache, are public. All that follow are + ** private to pcache.c and should not be accessed by other modules. + ** pCache is grouped with the public elements for efficiency. */ i16 nRef; /* Number of users of this page */ - PCache *pCache; /* Cache that owns this page */ - PgHdr *pDirtyNext; /* Next element in list of dirty pages */ PgHdr *pDirtyPrev; /* Previous element in list of dirty pages */ + /* NB: pDirtyNext and pDirtyPrev are undefined if the + ** PgHdr object is not dirty */ }; /* Bit values for PgHdr.flags */ @@ -13733,10 +15554,12 @@ SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file*,int,void*); #define SQLITE_FCNTL_DB_UNCHANGED 0xca093fa0 SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id); SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id); +#ifndef SQLITE_OMIT_WAL SQLITE_PRIVATE int sqlite3OsShmMap(sqlite3_file *,int,int,int,void volatile **); SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int, int, int); SQLITE_PRIVATE void sqlite3OsShmBarrier(sqlite3_file *id); SQLITE_PRIVATE int sqlite3OsShmUnmap(sqlite3_file *id, int); +#endif /* SQLITE_OMIT_WAL */ SQLITE_PRIVATE int sqlite3OsFetch(sqlite3_file *id, i64, int, void **); SQLITE_PRIVATE int sqlite3OsUnfetch(sqlite3_file *, i64, void *); @@ -13871,7 +15694,7 @@ SQLITE_PRIVATE void sqlite3OsCloseFree(sqlite3_file *); ** and the one-based values are used internally. */ #ifndef SQLITE_DEFAULT_SYNCHRONOUS -# define SQLITE_DEFAULT_SYNCHRONOUS (PAGER_SYNCHRONOUS_FULL-1) +# define SQLITE_DEFAULT_SYNCHRONOUS 2 #endif #ifndef SQLITE_DEFAULT_WAL_SYNCHRONOUS # define SQLITE_DEFAULT_WAL_SYNCHRONOUS SQLITE_DEFAULT_SYNCHRONOUS @@ -13945,6 +15768,7 @@ struct Schema { #define DB_SchemaLoaded 0x0001 /* The schema has been loaded */ #define DB_UnresetViews 0x0002 /* Some views have defined column names */ #define DB_Empty 0x0004 /* The file is empty (length 0 bytes) */ +#define DB_ResetWanted 0x0008 /* Reset the schema when nSchemaLock==0 */ /* ** The number of different kinds of things that can be limited @@ -13976,9 +15800,9 @@ struct Lookaside { u32 bDisable; /* Only operate the lookaside when zero */ u16 sz; /* Size of each buffer in bytes */ u8 bMalloced; /* True if pStart obtained from sqlite3_malloc() */ - int nOut; /* Number of buffers currently checked out */ - int mxOut; /* Highwater mark for nOut */ - int anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ + u32 nSlot; /* Number of lookaside slots allocated */ + u32 anStat[3]; /* 0: hits. 1: size misses. 2: full misses */ + LookasideSlot *pInit; /* List of buffers not previously used */ LookasideSlot *pFree; /* List of available buffers */ void *pStart; /* First byte of available memory space */ void *pEnd; /* First byte past end of available space */ @@ -14057,9 +15881,11 @@ struct sqlite3 { sqlite3_mutex *mutex; /* Connection mutex */ Db *aDb; /* All backends */ int nDb; /* Number of backends currently in use */ - int flags; /* Miscellaneous flags. See below */ + u32 mDbFlags; /* flags recording internal state */ + u32 flags; /* flags settable by pragmas. See below */ i64 lastRowid; /* ROWID of most recent insert (see above) */ i64 szMmap; /* Default mmap_size setting */ + u32 nSchemaLock; /* Do not reset the schema when non-zero */ unsigned int openFlags; /* Flags passed to sqlite3_vfs.xOpen() */ int errCode; /* Most recent error code (SQLITE_*) */ int errMask; /* & result codes with this before returning */ @@ -14076,7 +15902,8 @@ struct sqlite3 { u8 vtabOnConflict; /* Value to return for s3_vtab_on_conflict() */ u8 isTransactionSavepoint; /* True if the outermost savepoint is a TS */ u8 mTrace; /* zero or more SQLITE_TRACE flags */ - u8 skipBtreeMutex; /* True if no shared-cache backends */ + u8 noSharedCache; /* True if no shared-cache backends */ + u8 nSqlExec; /* Number of pending OP_SqlExec opcodes */ int nextPagesize; /* Pagesize after VACUUM if >0 */ u32 magic; /* Magic number for detect library misuse */ int nChange; /* Value returned by sqlite3_changes() */ @@ -14087,8 +15914,9 @@ struct sqlite3 { int newTnum; /* Rootpage of table being initialized */ u8 iDb; /* Which db file is being initialized */ u8 busy; /* TRUE if currently initializing */ - u8 orphanTrigger; /* Last statement is orphaned TEMP trigger */ - u8 imposterTable; /* Building an imposter table */ + unsigned orphanTrigger : 1; /* Last statement is orphaned TEMP trigger */ + unsigned imposterTable : 1; /* Building an imposter table */ + unsigned reopenMemdb : 1; /* ATTACH is really a reopen using MemDB */ } init; int nVdbeActive; /* Number of VDBEs currently running */ int nVdbeRead; /* Number of active VDBEs that read or write */ @@ -14141,7 +15969,7 @@ struct sqlite3 { Hash aModule; /* populated by sqlite3_create_module() */ VtabCtx *pVtabCtx; /* Context for active vtab connect/create */ VTable **aVTrans; /* Virtual tables with open transactions */ - VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ + VTable *pDisconnect; /* Disconnect these in next sqlite3_prepare() */ #endif Hash aFunc; /* Hash table of connection functions */ Hash aCollSeq; /* All collating sequences */ @@ -14190,8 +16018,8 @@ struct sqlite3 { ** SQLITE_CkptFullFSync == PAGER_CKPT_FULLFSYNC ** SQLITE_CacheSpill == PAGER_CACHE_SPILL */ -#define SQLITE_VdbeTrace 0x00000001 /* True to trace VDBE execution */ -#define SQLITE_InternChanges 0x00000002 /* Uncommitted Hash table changes */ +#define SQLITE_WriteSchema 0x00000001 /* OK to update SQLITE_MASTER */ +#define SQLITE_LegacyFileFmt 0x00000002 /* Create new databases in format 1 */ #define SQLITE_FullColNames 0x00000004 /* Show full column names on SELECT */ #define SQLITE_FullFSync 0x00000008 /* Use full fsync on the backend */ #define SQLITE_CkptFullFSync 0x00000010 /* Use full fsync for checkpoint */ @@ -14202,30 +16030,40 @@ struct sqlite3 { /* the count using a callback. */ #define SQLITE_NullCallback 0x00000100 /* Invoke the callback once if the */ /* result set is empty */ -#define SQLITE_SqlTrace 0x00000200 /* Debug print SQL as it executes */ -#define SQLITE_VdbeListing 0x00000400 /* Debug listings of VDBE programs */ -#define SQLITE_WriteSchema 0x00000800 /* OK to update SQLITE_MASTER */ -#define SQLITE_VdbeAddopTrace 0x00001000 /* Trace sqlite3VdbeAddOp() calls */ -#define SQLITE_IgnoreChecks 0x00002000 /* Do not enforce check constraints */ -#define SQLITE_ReadUncommitted 0x0004000 /* For shared-cache mode */ -#define SQLITE_LegacyFileFmt 0x00008000 /* Create new databases in format 1 */ -#define SQLITE_RecoveryMode 0x00010000 /* Ignore schema errors */ -#define SQLITE_ReverseOrder 0x00020000 /* Reverse unordered SELECTs */ -#define SQLITE_RecTriggers 0x00040000 /* Enable recursive triggers */ -#define SQLITE_ForeignKeys 0x00080000 /* Enforce foreign key constraints */ -#define SQLITE_AutoIndex 0x00100000 /* Enable automatic indexes */ -#define SQLITE_PreferBuiltin 0x00200000 /* Preference to built-in funcs */ -#define SQLITE_LoadExtension 0x00400000 /* Enable load_extension */ -#define SQLITE_LoadExtFunc 0x00800000 /* Enable load_extension() SQL func */ -#define SQLITE_EnableTrigger 0x01000000 /* True to enable triggers */ -#define SQLITE_DeferFKs 0x02000000 /* Defer all FK constraints */ -#define SQLITE_QueryOnly 0x04000000 /* Disable database changes */ -#define SQLITE_VdbeEQP 0x08000000 /* Debug EXPLAIN QUERY PLAN */ -#define SQLITE_Vacuum 0x10000000 /* Currently in a VACUUM */ -#define SQLITE_CellSizeCk 0x20000000 /* Check btree cell sizes on load */ -#define SQLITE_Fts3Tokenizer 0x40000000 /* Enable fts3_tokenizer(2) */ -#define SQLITE_NoCkptOnClose 0x80000000 /* No checkpoint on close()/DETACH */ +#define SQLITE_IgnoreChecks 0x00000200 /* Do not enforce check constraints */ +#define SQLITE_ReadUncommit 0x00000400 /* READ UNCOMMITTED in shared-cache */ +#define SQLITE_NoCkptOnClose 0x00000800 /* No checkpoint on close()/DETACH */ +#define SQLITE_ReverseOrder 0x00001000 /* Reverse unordered SELECTs */ +#define SQLITE_RecTriggers 0x00002000 /* Enable recursive triggers */ +#define SQLITE_ForeignKeys 0x00004000 /* Enforce foreign key constraints */ +#define SQLITE_AutoIndex 0x00008000 /* Enable automatic indexes */ +#define SQLITE_LoadExtension 0x00010000 /* Enable load_extension */ +#define SQLITE_LoadExtFunc 0x00020000 /* Enable load_extension() SQL func */ +#define SQLITE_EnableTrigger 0x00040000 /* True to enable triggers */ +#define SQLITE_DeferFKs 0x00080000 /* Defer all FK constraints */ +#define SQLITE_QueryOnly 0x00100000 /* Disable database changes */ +#define SQLITE_CellSizeCk 0x00200000 /* Check btree cell sizes on load */ +#define SQLITE_Fts3Tokenizer 0x00400000 /* Enable fts3_tokenizer(2) */ +#define SQLITE_EnableQPSG 0x00800000 /* Query Planner Stability Guarantee*/ +#define SQLITE_TriggerEQP 0x01000000 /* Show trigger EXPLAIN QUERY PLAN */ +#define SQLITE_ResetDatabase 0x02000000 /* Reset the database */ + +/* Flags used only if debugging */ +#ifdef SQLITE_DEBUG +#define SQLITE_SqlTrace 0x08000000 /* Debug print SQL as it executes */ +#define SQLITE_VdbeListing 0x10000000 /* Debug listings of VDBE programs */ +#define SQLITE_VdbeTrace 0x20000000 /* True to trace VDBE execution */ +#define SQLITE_VdbeAddopTrace 0x40000000 /* Trace sqlite3VdbeAddOp() calls */ +#define SQLITE_VdbeEQP 0x80000000 /* Debug EXPLAIN QUERY PLAN */ +#endif +/* +** Allowed values for sqlite3.mDbFlags +*/ +#define DBFLAG_SchemaChange 0x0001 /* Uncommitted Hash table changes */ +#define DBFLAG_PreferBuiltin 0x0002 /* Preference to built-in funcs */ +#define DBFLAG_Vacuum 0x0004 /* Currently in a VACUUM */ +#define DBFLAG_SchemaKnownOk 0x0008 /* Schema is known to be valid */ /* ** Bits of the sqlite3.dbOptFlags field that are used by the @@ -14236,15 +16074,17 @@ struct sqlite3 { #define SQLITE_ColumnCache 0x0002 /* Column cache */ #define SQLITE_GroupByOrder 0x0004 /* GROUPBY cover of ORDERBY */ #define SQLITE_FactorOutConst 0x0008 /* Constant factoring */ -/* not used 0x0010 // Was: SQLITE_IdxRealAsInt */ -#define SQLITE_DistinctOpt 0x0020 /* DISTINCT using indexes */ -#define SQLITE_CoverIdxScan 0x0040 /* Covering index scans */ -#define SQLITE_OrderByIdxJoin 0x0080 /* ORDER BY of joins via index */ -#define SQLITE_SubqCoroutine 0x0100 /* Evaluate subqueries as coroutines */ -#define SQLITE_Transitive 0x0200 /* Transitive constraints */ -#define SQLITE_OmitNoopJoin 0x0400 /* Omit unused tables in joins */ +#define SQLITE_DistinctOpt 0x0010 /* DISTINCT using indexes */ +#define SQLITE_CoverIdxScan 0x0020 /* Covering index scans */ +#define SQLITE_OrderByIdxJoin 0x0040 /* ORDER BY of joins via index */ +#define SQLITE_Transitive 0x0080 /* Transitive constraints */ +#define SQLITE_OmitNoopJoin 0x0100 /* Omit unused tables in joins */ +#define SQLITE_CountOfView 0x0200 /* The count-of-view optimization */ +#define SQLITE_CursorHints 0x0400 /* Add OP_CursorHint opcodes */ #define SQLITE_Stat34 0x0800 /* Use STAT3 or STAT4 data */ -#define SQLITE_CursorHints 0x2000 /* Add OP_CursorHint opcodes */ + /* TH3 expects the Stat34 ^^^^^^ value to be 0x0800. Don't change it */ +#define SQLITE_PushDown 0x1000 /* The push-down optimization */ +#define SQLITE_SimplifyJoin 0x2000 /* Convert LEFT JOIN to JOIN */ #define SQLITE_AllOpts 0xffff /* All optimizations */ /* @@ -14343,6 +16183,7 @@ struct FuncDestructor { #define SQLITE_FUNC_SLOCHNG 0x2000 /* "Slow Change". Value constant during a ** single query - might change over time */ #define SQLITE_FUNC_AFFINITY 0x4000 /* Built-in affinity() function */ +#define SQLITE_FUNC_OFFSET 0x8000 /* Built-in sqlite_offset() function */ /* ** The following three macros, FUNCTION(), LIKEFUNC() and AGGREGATE() are @@ -14362,7 +16203,14 @@ struct FuncDestructor { ** Like FUNCTION except it omits the SQLITE_FUNC_CONSTANT flag and ** adds the SQLITE_FUNC_SLOCHNG flag. Used for date & time functions ** and functions like sqlite_version() that can change, but not during -** a single query. +** a single query. The iArg is ignored. The user-data is always set +** to a NULL pointer. The bNC parameter is not used. +** +** PURE_DATE(zName, nArg, iArg, bNC, xFunc) +** Used for "pure" date/time functions, this macro is like DFUNCTION +** except that it does set the SQLITE_FUNC_CONSTANT flags. iArg is +** ignored and the user-data for these functions is set to an +** arbitrary non-NULL pointer. The bNC parameter is not used. ** ** AGGREGATE(zName, nArg, iArg, bNC, xStep, xFinal) ** Used to create an aggregate function definition implemented by @@ -14385,8 +16233,11 @@ struct FuncDestructor { {nArg, SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } #define DFUNCTION(zName, nArg, iArg, bNC, xFunc) \ - {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL), \ - SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } + {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8, \ + 0, 0, xFunc, 0, #zName, {0} } +#define PURE_DATE(zName, nArg, iArg, bNC, xFunc) \ + {nArg, SQLITE_FUNC_SLOCHNG|SQLITE_UTF8|SQLITE_FUNC_CONSTANT, \ + (void*)&sqlite3Config, 0, xFunc, 0, #zName, {0} } #define FUNCTION2(zName, nArg, iArg, bNC, xFunc, extraFlags) \ {nArg,SQLITE_FUNC_CONSTANT|SQLITE_UTF8|(bNC*SQLITE_FUNC_NEEDCOLL)|extraFlags,\ SQLITE_INT_TO_PTR(iArg), 0, xFunc, 0, #zName, {0} } @@ -14457,6 +16308,8 @@ struct Column { #define COLFLAG_PRIMKEY 0x0001 /* Column is part of the primary key */ #define COLFLAG_HIDDEN 0x0002 /* A hidden column in a virtual table */ #define COLFLAG_HASTYPE 0x0004 /* Type name follows column name */ +#define COLFLAG_UNIQUE 0x0008 /* Column def contains "UNIQUE" or "PK" */ +#define COLFLAG_SORTERREF 0x0010 /* Use sorter-refs with this column */ /* ** A "Collating Sequence" is defined by an instance of the following @@ -14592,6 +16445,7 @@ struct Table { /* ... also used as column name list in a VIEW */ int tnum; /* Root BTree page for this table */ u32 nTabRef; /* Number of pointers to this Table */ + u32 tabFlags; /* Mask of TF_* values */ i16 iPKey; /* If not negative, use aCol[iPKey] as the rowid */ i16 nCol; /* Number of columns in this table */ LogEst nRowLogEst; /* Estimated rows in table - from sqlite_stat1 table */ @@ -14599,7 +16453,6 @@ struct Table { #ifdef SQLITE_ENABLE_COSTMULT LogEst costMult; /* Cost multiplier for using this table */ #endif - u8 tabFlags; /* Mask of TF_* values */ u8 keyConf; /* What to do in case of uniqueness conflict on iPKey */ #ifndef SQLITE_OMIT_ALTERTABLE int addColOffset; /* Offset in CREATE TABLE stmt to add a new column */ @@ -14623,15 +16476,17 @@ struct Table { ** the TF_OOOHidden attribute would apply in this case. Such tables require ** special handling during INSERT processing. */ -#define TF_Readonly 0x01 /* Read-only system table */ -#define TF_Ephemeral 0x02 /* An ephemeral table */ -#define TF_HasPrimaryKey 0x04 /* Table has a primary key */ -#define TF_Autoincrement 0x08 /* Integer primary key is autoincrement */ -#define TF_Virtual 0x10 /* Is a virtual table */ -#define TF_WithoutRowid 0x20 /* No rowid. PRIMARY KEY is the key */ -#define TF_NoVisibleRowid 0x40 /* No user-visible "rowid" column */ -#define TF_OOOHidden 0x80 /* Out-of-Order hidden columns */ - +#define TF_Readonly 0x0001 /* Read-only system table */ +#define TF_Ephemeral 0x0002 /* An ephemeral table */ +#define TF_HasPrimaryKey 0x0004 /* Table has a primary key */ +#define TF_Autoincrement 0x0008 /* Integer primary key is autoincrement */ +#define TF_HasStat1 0x0010 /* nRowLogEst set from sqlite_stat1 */ +#define TF_WithoutRowid 0x0020 /* No rowid. PRIMARY KEY is the key */ +#define TF_NoVisibleRowid 0x0040 /* No user-visible "rowid" column */ +#define TF_OOOHidden 0x0080 /* Out-of-Order hidden columns */ +#define TF_StatsUsed 0x0100 /* Query planner decisions affected by + ** Index.aiRowLogEst[] values */ +#define TF_HasNotNull 0x0200 /* Contains NOT NULL constraints */ /* ** Test to see whether or not a table is a virtual table. This is @@ -14639,7 +16494,7 @@ struct Table { ** table support is omitted from the build. */ #ifndef SQLITE_OMIT_VIRTUALTABLE -# define IsVirtual(X) (((X)->tabFlags & TF_Virtual)!=0) +# define IsVirtual(X) ((X)->nModuleArg) #else # define IsVirtual(X) 0 #endif @@ -14742,13 +16597,12 @@ struct FKey { #define OE_Fail 3 /* Stop the operation but leave all prior changes */ #define OE_Ignore 4 /* Ignore the error. Do not do the INSERT or UPDATE */ #define OE_Replace 5 /* Delete existing record, then do INSERT or UPDATE */ - -#define OE_Restrict 6 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ -#define OE_SetNull 7 /* Set the foreign key value to NULL */ -#define OE_SetDflt 8 /* Set the foreign key value to its default */ -#define OE_Cascade 9 /* Cascade the changes */ - -#define OE_Default 10 /* Do whatever the default action is */ +#define OE_Update 6 /* Process as a DO UPDATE in an upsert */ +#define OE_Restrict 7 /* OE_Abort for IMMEDIATE, OE_Rollback for DEFERRED */ +#define OE_SetNull 8 /* Set the foreign key value to NULL */ +#define OE_SetDflt 9 /* Set the foreign key value to its default */ +#define OE_Cascade 10 /* Cascade the changes */ +#define OE_Default 11 /* Do whatever the default action is */ /* @@ -14763,8 +16617,8 @@ struct FKey { struct KeyInfo { u32 nRef; /* Number of references to this KeyInfo object */ u8 enc; /* Text encoding - one of the SQLITE_UTF* values */ - u16 nField; /* Number of key columns in the index */ - u16 nXField; /* Number of columns beyond the key columns */ + u16 nKeyField; /* Number of key columns in the index */ + u16 nAllField; /* Total columns, including key plus others */ sqlite3 *db; /* The database connection */ u8 *aSortOrder; /* Sort order for each column. */ CollSeq *aColl[1]; /* Collating sequence for each term of the key */ @@ -14811,8 +16665,8 @@ struct UnpackedRecord { u16 nField; /* Number of entries in apMem[] */ i8 default_rc; /* Comparison result if keys are equal */ u8 errCode; /* Error detected by xRecordCompare (CORRUPT or NOMEM) */ - i8 r1; /* Value to return if (lhs > rhs) */ - i8 r2; /* Value to return if (rhs < lhs) */ + i8 r1; /* Value to return if (lhs < rhs) */ + i8 r2; /* Value to return if (lhs > rhs) */ u8 eqSeen; /* True if an equality comparison has been seen */ }; @@ -14874,6 +16728,8 @@ struct Index { unsigned isResized:1; /* True if resizeIndexObject() has been called */ unsigned isCovering:1; /* True if this is a covering index */ unsigned noSkipScan:1; /* Do not try to use skip-scan if true */ + unsigned hasStat1:1; /* aiRowLogEst values come from sqlite_stat1 */ + unsigned bNoQuery:1; /* Do not use this index to optimize queries */ #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 int nSample; /* Number of elements in aSample[] */ int nSampleCol; /* Size of IndexSample.anEq[] and so on */ @@ -15095,7 +16951,8 @@ struct Expr { ** TK_COLUMN: the value of p5 for OP_Column ** TK_AGG_FUNCTION: nesting depth */ AggInfo *pAggInfo; /* Used by TK_AGG_COLUMN and TK_AGG_FUNCTION */ - Table *pTab; /* Table for TK_COLUMN expressions. */ + Table *pTab; /* Table for TK_COLUMN expressions. Can be NULL + ** for a column of an index on an expression */ }; /* @@ -15103,8 +16960,8 @@ struct Expr { */ #define EP_FromJoin 0x000001 /* Originates in ON/USING clause of outer join */ #define EP_Agg 0x000002 /* Contains one or more aggregate functions */ -#define EP_Resolved 0x000004 /* IDs have been resolved to COLUMNs */ -#define EP_Error 0x000008 /* Expression contains one or more errors */ +#define EP_HasFunc 0x000004 /* Contains one or more functions of any kind */ + /* 0x000008 // available for use */ #define EP_Distinct 0x000010 /* Aggregate function with DISTINCT keyword */ #define EP_VarSelect 0x000020 /* pSelect is correlated, not constant */ #define EP_DblQuoted 0x000040 /* token.z was originally in "..." */ @@ -15127,9 +16984,10 @@ struct Expr { #define EP_Leaf 0x800000 /* Expr.pLeft, .pRight, .u.pSelect all NULL */ /* -** Combinations of two or more EP_* flags +** The EP_Propagate mask is a set of properties that automatically propagate +** upwards into parent nodes. */ -#define EP_Propagate (EP_Collate|EP_Subquery) /* Propagate these bits up tree */ +#define EP_Propagate (EP_Collate|EP_Subquery|EP_HasFunc) /* ** These macros can be used to test, set, or clear bits in the @@ -15184,13 +17042,14 @@ struct Expr { struct ExprList { int nExpr; /* Number of expressions on the list */ struct ExprList_item { /* For each expression in the list */ - Expr *pExpr; /* The list of expressions */ + Expr *pExpr; /* The parse tree for this expression */ char *zName; /* Token associated with this expression */ char *zSpan; /* Original text of the expression */ u8 sortOrder; /* 1 for DESC or 0 for ASC */ unsigned done :1; /* A flag to indicate when processing is finished */ unsigned bSpanIsTab :1; /* zSpan holds DB.TABLE.COLUMN */ unsigned reusable :1; /* Constant expression is reusable */ + unsigned bSorterRef :1; /* Defer evaluation until after sorting */ union { struct { u16 iOrderByCol; /* For ORDER BY, column number in result set */ @@ -15198,18 +17057,7 @@ struct ExprList { } x; int iConstExprReg; /* Register in which Expr value is cached */ } u; - } *a; /* Alloc a power of two greater or equal to nExpr */ -}; - -/* -** An instance of this structure is used by the parser to record both -** the parse tree for an expression and the span of input text for an -** expression. -*/ -struct ExprSpan { - Expr *pExpr; /* The expression parse tree */ - const char *zStart; /* First character of input text */ - const char *zEnd; /* One character past the end of input text */ + } a[1]; /* One slot for each expression in the list */ }; /* @@ -15301,9 +17149,6 @@ struct SrcList { unsigned viaCoroutine :1; /* Implemented as a co-routine */ unsigned isRecursive :1; /* True for recursive reference in WITH */ } fg; -#ifndef SQLITE_OMIT_EXPLAIN - u8 iSelectId; /* If pSelect!=0, the id of the sub-select in EQP */ -#endif int iCursor; /* The VDBE cursor number used to access this table */ Expr *pOn; /* The ON clause of a join */ IdList *pUsing; /* The USING clause of a join */ @@ -15385,8 +17230,11 @@ struct SrcList { struct NameContext { Parse *pParse; /* The parser */ SrcList *pSrcList; /* One or more tables used to resolve names */ - ExprList *pEList; /* Optional list of result-set columns */ - AggInfo *pAggInfo; /* Information about aggregates at this level */ + union { + ExprList *pEList; /* Optional list of result-set columns */ + AggInfo *pAggInfo; /* Information about aggregates at this level */ + Upsert *pUpsert; /* ON CONFLICT clause information from an upsert */ + } uNC; NameContext *pNext; /* Next outer name context. NULL for outermost */ int nRef; /* Number of names resolved by this context */ int nErr; /* Number of errors encountered while resolving names */ @@ -15408,17 +17256,48 @@ struct NameContext { #define NC_HasAgg 0x0010 /* One or more aggregate functions seen */ #define NC_IdxExpr 0x0020 /* True if resolving columns of CREATE INDEX */ #define NC_VarSelect 0x0040 /* A correlated subquery has been seen */ +#define NC_UEList 0x0080 /* True if uNC.pEList is used */ +#define NC_UAggInfo 0x0100 /* True if uNC.pAggInfo is used */ +#define NC_UUpsert 0x0200 /* True if uNC.pUpsert is used */ #define NC_MinMaxAgg 0x1000 /* min/max aggregates seen. See note above */ +#define NC_Complex 0x2000 /* True if a function or subquery seen */ + +/* +** An instance of the following object describes a single ON CONFLICT +** clause in an upsert. +** +** The pUpsertTarget field is only set if the ON CONFLICT clause includes +** conflict-target clause. (In "ON CONFLICT(a,b)" the "(a,b)" is the +** conflict-target clause.) The pUpsertTargetWhere is the optional +** WHERE clause used to identify partial unique indexes. +** +** pUpsertSet is the list of column=expr terms of the UPDATE statement. +** The pUpsertSet field is NULL for a ON CONFLICT DO NOTHING. The +** pUpsertWhere is the WHERE clause for the UPDATE and is NULL if the +** WHERE clause is omitted. +*/ +struct Upsert { + ExprList *pUpsertTarget; /* Optional description of conflicting index */ + Expr *pUpsertTargetWhere; /* WHERE clause for partial index targets */ + ExprList *pUpsertSet; /* The SET clause from an ON CONFLICT UPDATE */ + Expr *pUpsertWhere; /* WHERE clause for the ON CONFLICT UPDATE */ + /* The fields above comprise the parse tree for the upsert clause. + ** The fields below are used to transfer information from the INSERT + ** processing down into the UPDATE processing while generating code. + ** Upsert owns the memory allocated above, but not the memory below. */ + Index *pUpsertIdx; /* Constraint that pUpsertTarget identifies */ + SrcList *pUpsertSrc; /* Table to be updated */ + int regData; /* First register holding array of VALUES */ + int iDataCur; /* Index of the data cursor */ + int iIdxCur; /* Index of the first index cursor */ +}; /* ** An instance of the following structure contains all information ** needed to generate code for a single SELECT statement. ** -** nLimit is set to -1 if there is no LIMIT clause. nOffset is set to 0. -** If there is a LIMIT clause, the parser sets nLimit to the value of the -** limit and nOffset to the value of the offset (or 0 if there is not -** offset). But later on, nLimit and nOffset become the memory locations -** in the VDBE that record the limit and offset counters. +** See the header comment on the computeLimitRegisters() routine for a +** detailed description of the meaning of the iLimit and iOffset fields. ** ** addrOpenEphm[] entries contain the address of OP_OpenEphemeral opcodes. ** These addresses must be stored so that we can go back and fill in @@ -15448,7 +17327,6 @@ struct Select { Select *pPrior; /* Prior select in a compound select statement */ Select *pNext; /* Next select to the left in a compound */ Expr *pLimit; /* LIMIT expression. NULL means not used. */ - Expr *pOffset; /* OFFSET expression. NULL means not used. */ With *pWith; /* WITH clause attached to this select. Or NULL. */ }; @@ -15479,7 +17357,7 @@ struct Select { #define SF_MaybeConvert 0x08000 /* Need convertCompoundSelectToSubquery() */ #define SF_Converted 0x10000 /* By convertCompoundSelectToSubquery() */ #define SF_IncludeHidden 0x20000 /* Include hidden columns in output */ - +#define SF_ComplexResult 0x40000 /* Result contains subquery or function */ /* ** The results of a SELECT can be distributed in several ways, as defined @@ -15570,10 +17448,10 @@ struct Select { */ struct SelectDest { u8 eDest; /* How to dispose of the results. On of SRT_* above. */ - char *zAffSdst; /* Affinity used when eDest==SRT_Set */ int iSDParm; /* A parameter used by the eDest disposal method */ int iSdst; /* Base register where results are written */ int nSdst; /* Number of registers allocated */ + char *zAffSdst; /* Affinity used when eDest==SRT_Set */ ExprList *pOrderBy; /* Key columns for SRT_Queue and SRT_DistQueue */ }; @@ -15683,8 +17561,8 @@ struct Parse { int nMem; /* Number of memory cells used so far */ int nOpAlloc; /* Number of slots allocated for Vdbe.aOp[] */ int szOpAlloc; /* Bytes of memory space allocated for Vdbe.aOp[] */ - int ckBase; /* Base register of data during check constraints */ - int iSelfTab; /* Table of an index whose exprs are being coded */ + int iSelfTab; /* Table associated with an index on expr, or negative + ** of the base register during check-constraint eval */ int iCacheLevel; /* ColCache valid when aColCache[].iLevel<=iCacheLevel */ int iCacheCnt; /* Counter used to generate aColCache[].lru values */ int nLabel; /* Number of labels used */ @@ -15698,7 +17576,6 @@ struct Parse { int nMaxArg; /* Max args passed to user function by sub-program */ #if SELECTTRACE_ENABLED int nSelect; /* Number of SELECT statements seen */ - int nSelectIndent; /* How far to indent SELECTTRACE() output */ #endif #ifndef SQLITE_OMIT_SHARED_CACHE int nTableLock; /* Number of locks in aTableLock */ @@ -15707,7 +17584,7 @@ struct Parse { AutoincInfo *pAinc; /* Information about AUTOINCREMENT counters */ Parse *pToplevel; /* Parse structure for main program (or NULL) */ Table *pTriggerTab; /* Table triggers are being coded for */ - int addrCrTab; /* Address of OP_CreateTable opcode on CREATE TABLE */ + int addrCrTab; /* Address of OP_CreateBtree opcode on CREATE TABLE */ u32 nQueryLoop; /* Est number of iterations of a query (10*log2(N)) */ u32 oldmask; /* Mask of old.* columns referenced */ u32 newmask; /* Mask of new.* columns referenced */ @@ -15750,8 +17627,7 @@ struct Parse { #endif int nHeight; /* Expression tree height of current sub-select */ #ifndef SQLITE_OMIT_EXPLAIN - int iSelectId; /* ID of current select for EXPLAIN output */ - int iNextSelectId; /* Next available select ID for EXPLAIN output */ + int addrExplain; /* Address of current OP_Explain opcode */ #endif VList *pVList; /* Mapping between variable names and numbers */ Vdbe *pReprepare; /* VM being reprepared (sqlite3Reprepare()) */ @@ -15824,6 +17700,7 @@ struct AuthContext { #define OPFLAG_PERMUTE 0x01 /* OP_Compare: use the permutation */ #define OPFLAG_SAVEPOSITION 0x02 /* OP_Delete/Insert: save cursor pos */ #define OPFLAG_AUXDELETE 0x04 /* OP_Delete: index in a DELETE op */ +#define OPFLAG_NOCHNG_MAGIC 0x6d /* OP_MakeRecord: serialtype 10 is ok */ /* * Each trigger present in the database schema is stored as an instance of @@ -15909,8 +17786,10 @@ struct TriggerStep { Select *pSelect; /* SELECT statement or RHS of INSERT INTO SELECT ... */ char *zTarget; /* Target table for DELETE, UPDATE, INSERT */ Expr *pWhere; /* The WHERE clause for DELETE or UPDATE steps */ - ExprList *pExprList; /* SET clause for UPDATE. */ + ExprList *pExprList; /* SET clause for UPDATE */ IdList *pIdList; /* Column names for INSERT */ + Upsert *pUpsert; /* Upsert clauses on an INSERT */ + char *zSpan; /* Original SQL text of this command */ TriggerStep *pNext; /* Next in the link-list */ TriggerStep *pLast; /* Last element in link-list. Valid for 1st elem only */ }; @@ -15934,18 +17813,15 @@ struct DbFixer { ** An objected used to accumulate the text of a string where we ** do not necessarily know how big the string will be in the end. */ -struct StrAccum { +struct sqlite3_str { sqlite3 *db; /* Optional database for lookaside. Can be NULL */ - char *zBase; /* A base allocation. Not from malloc. */ char *zText; /* The string collected so far */ - u32 nChar; /* Length of the string so far */ u32 nAlloc; /* Amount of space allocated in zText */ u32 mxAlloc; /* Maximum allowed allocation. 0 for no malloc usage */ - u8 accError; /* STRACCUM_NOMEM or STRACCUM_TOOBIG */ + u32 nChar; /* Length of the string so far */ + u8 accError; /* SQLITE_NOMEM or SQLITE_TOOBIG */ u8 printfFlags; /* SQLITE_PRINTF flags below */ }; -#define STRACCUM_NOMEM 1 -#define STRACCUM_TOOBIG 2 #define SQLITE_PRINTF_INTERNAL 0x01 /* Internal-use-only converters allowed */ #define SQLITE_PRINTF_SQLFUNC 0x02 /* SQL function arguments to VXPrintf */ #define SQLITE_PRINTF_MALLOCED 0x04 /* True if xText is allocated space */ @@ -15975,6 +17851,7 @@ struct Sqlite3Config { int bFullMutex; /* True to enable full mutexing */ int bOpenUri; /* True to interpret filenames as URIs */ int bUseCis; /* Use covering indices for full-scans */ + int bSmallMalloc; /* Avoid large memory allocations if true */ int mxStrlen; /* Maximum string length */ int neverCorrupt; /* Database is always well-formed */ int szLookaside; /* Default lookaside buffer size */ @@ -15988,9 +17865,6 @@ struct Sqlite3Config { int mnReq, mxReq; /* Min and max heap requests sizes */ sqlite3_int64 szMmap; /* mmap() space per open file */ sqlite3_int64 mxMmap; /* Maximum value for szMmap */ - void *pScratch; /* Scratch memory */ - int szScratch; /* Size of each scratch buffer */ - int nScratch; /* Number of scratch buffers */ void *pPage; /* Page cache memory */ int szPage; /* Size of each page in pPage[] */ int nPage; /* Number of pages in pPage[] */ @@ -16024,6 +17898,7 @@ struct Sqlite3Config { #endif int bLocaltimeFault; /* True to fail localtime() calls */ int iOnceResetThreshold; /* When to reset OP_Once counters */ + u32 szSorterRef; /* Min size in bytes to use sorter-refs */ }; /* @@ -16055,14 +17930,17 @@ struct Walker { int walkerDepth; /* Number of subqueries */ u8 eCode; /* A small processing code */ union { /* Extra data for callback */ - NameContext *pNC; /* Naming context */ - int n; /* A counter */ - int iCur; /* A cursor number */ - SrcList *pSrcList; /* FROM clause */ - struct SrcCount *pSrcCount; /* Counting column references */ - struct CCurHint *pCCurHint; /* Used by codeCursorHint() */ - int *aiCol; /* array of column indexes */ - struct IdxCover *pIdxCover; /* Check for index coverage */ + NameContext *pNC; /* Naming context */ + int n; /* A counter */ + int iCur; /* A cursor number */ + SrcList *pSrcList; /* FROM clause */ + struct SrcCount *pSrcCount; /* Counting column references */ + struct CCurHint *pCCurHint; /* Used by codeCursorHint() */ + int *aiCol; /* array of column indexes */ + struct IdxCover *pIdxCover; /* Check for index coverage */ + struct IdxExprTrans *pIdxTrans; /* Convert idxed expr to column */ + ExprList *pGroupBy; /* GROUP BY clause */ + Select *pSelect; /* HAVING to WHERE clause ctx */ } u; }; @@ -16073,6 +17951,11 @@ SQLITE_PRIVATE int sqlite3WalkSelect(Walker*, Select*); SQLITE_PRIVATE int sqlite3WalkSelectExpr(Walker*, Select*); SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker*, Select*); SQLITE_PRIVATE int sqlite3ExprWalkNoop(Walker*, Expr*); +SQLITE_PRIVATE int sqlite3SelectWalkNoop(Walker*, Select*); +SQLITE_PRIVATE int sqlite3SelectWalkFail(Walker*, Select*); +#ifdef SQLITE_DEBUG +SQLITE_PRIVATE void sqlite3SelectWalkAssert2(Walker*, Select*); +#endif /* ** Return code from the parse-tree walking primitives and their @@ -16125,6 +18008,7 @@ struct TreeView { ** using sqlite3_log(). The routines also provide a convenient place ** to set a debugger breakpoint. */ +SQLITE_PRIVATE int sqlite3ReportError(int iErr, int lineno, const char *zType); SQLITE_PRIVATE int sqlite3CorruptError(int); SQLITE_PRIVATE int sqlite3MisuseError(int); SQLITE_PRIVATE int sqlite3CantopenError(int); @@ -16134,11 +18018,14 @@ SQLITE_PRIVATE int sqlite3CantopenError(int); #ifdef SQLITE_DEBUG SQLITE_PRIVATE int sqlite3NomemError(int); SQLITE_PRIVATE int sqlite3IoerrnomemError(int); +SQLITE_PRIVATE int sqlite3CorruptPgnoError(int,Pgno); # define SQLITE_NOMEM_BKPT sqlite3NomemError(__LINE__) # define SQLITE_IOERR_NOMEM_BKPT sqlite3IoerrnomemError(__LINE__) +# define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptPgnoError(__LINE__,(P)) #else # define SQLITE_NOMEM_BKPT SQLITE_NOMEM # define SQLITE_IOERR_NOMEM_BKPT SQLITE_IOERR_NOMEM +# define SQLITE_CORRUPT_PGNO(P) sqlite3CorruptError(__LINE__) #endif /* @@ -16212,14 +18099,14 @@ SQLITE_PRIVATE void *sqlite3DbMallocRaw(sqlite3*, u64); SQLITE_PRIVATE void *sqlite3DbMallocRawNN(sqlite3*, u64); SQLITE_PRIVATE char *sqlite3DbStrDup(sqlite3*,const char*); SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3*,const char*, u64); +SQLITE_PRIVATE char *sqlite3DbSpanDup(sqlite3*,const char*,const char*); SQLITE_PRIVATE void *sqlite3Realloc(void*, u64); SQLITE_PRIVATE void *sqlite3DbReallocOrFree(sqlite3 *, void *, u64); SQLITE_PRIVATE void *sqlite3DbRealloc(sqlite3 *, void *, u64); SQLITE_PRIVATE void sqlite3DbFree(sqlite3*, void*); +SQLITE_PRIVATE void sqlite3DbFreeNN(sqlite3*, void*); SQLITE_PRIVATE int sqlite3MallocSize(void*); SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3*, void*); -SQLITE_PRIVATE void *sqlite3ScratchMalloc(int); -SQLITE_PRIVATE void sqlite3ScratchFree(void*); SQLITE_PRIVATE void *sqlite3PageMalloc(int); SQLITE_PRIVATE void sqlite3PageFree(void*); SQLITE_PRIVATE void sqlite3MemSetDefault(void); @@ -16275,11 +18162,18 @@ SQLITE_PRIVATE sqlite3_int64 sqlite3StatusValue(int); SQLITE_PRIVATE void sqlite3StatusUp(int, int); SQLITE_PRIVATE void sqlite3StatusDown(int, int); SQLITE_PRIVATE void sqlite3StatusHighwater(int, int); +SQLITE_PRIVATE int sqlite3LookasideUsed(sqlite3*,int*); /* Access to mutexes used by sqlite3_status() */ SQLITE_PRIVATE sqlite3_mutex *sqlite3Pcache1Mutex(void); SQLITE_PRIVATE sqlite3_mutex *sqlite3MallocMutex(void); +#if defined(SQLITE_ENABLE_MULTITHREADED_CHECKS) && !defined(SQLITE_MUTEX_OMIT) +SQLITE_PRIVATE void sqlite3MutexWarnOnContention(sqlite3_mutex*); +#else +# define sqlite3MutexWarnOnContention(x) +#endif + #ifndef SQLITE_OMIT_FLOATING_POINT SQLITE_PRIVATE int sqlite3IsNaN(double); #else @@ -16296,8 +18190,6 @@ struct PrintfArguments { sqlite3_value **apArg; /* The argument values */ }; -SQLITE_PRIVATE void sqlite3VXPrintf(StrAccum*, const char*, va_list); -SQLITE_PRIVATE void sqlite3XPrintf(StrAccum*, const char*, ...); SQLITE_PRIVATE char *sqlite3MPrintf(sqlite3*,const char*, ...); SQLITE_PRIVATE char *sqlite3VMPrintf(sqlite3*,const char*, va_list); #if defined(SQLITE_DEBUG) || defined(SQLITE_HAVE_OS_TRACE) @@ -16344,7 +18236,7 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListAppend(Parse*,ExprList*,Expr*); SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector(Parse*,ExprList*,IdList*,Expr*); SQLITE_PRIVATE void sqlite3ExprListSetSortOrder(ExprList*,int); SQLITE_PRIVATE void sqlite3ExprListSetName(Parse*,ExprList*,Token*,int); -SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,ExprSpan*); +SQLITE_PRIVATE void sqlite3ExprListSetSpan(Parse*,ExprList*,const char*,const char*); SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3*, ExprList*); SQLITE_PRIVATE u32 sqlite3ExprListFlags(const ExprList*); SQLITE_PRIVATE int sqlite3Init(sqlite3*, char**); @@ -16374,7 +18266,7 @@ SQLITE_PRIVATE void sqlite3AddColumn(Parse*,Token*,Token*); SQLITE_PRIVATE void sqlite3AddNotNull(Parse*, int); SQLITE_PRIVATE void sqlite3AddPrimaryKey(Parse*, ExprList*, int, int, int); SQLITE_PRIVATE void sqlite3AddCheckConstraint(Parse*, Expr*); -SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,ExprSpan*); +SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse*,Expr*,const char*,const char*); SQLITE_PRIVATE void sqlite3AddCollateType(Parse*, Token*); SQLITE_PRIVATE void sqlite3EndTable(Parse*,Token*,Token*,u8,Select*); SQLITE_PRIVATE int sqlite3ParseUri(const char*,const char*,unsigned int*, @@ -16425,7 +18317,7 @@ SQLITE_PRIVATE void sqlite3AutoincrementEnd(Parse *pParse); # define sqlite3AutoincrementBegin(X) # define sqlite3AutoincrementEnd(X) #endif -SQLITE_PRIVATE void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int); +SQLITE_PRIVATE void sqlite3Insert(Parse*, SrcList*, Select*, IdList*, int, Upsert*); SQLITE_PRIVATE void *sqlite3ArrayAllocate(sqlite3*,void*,int,int*,int*); SQLITE_PRIVATE IdList *sqlite3IdListAppend(sqlite3*, IdList*, Token*); SQLITE_PRIVATE int sqlite3IdListIndex(IdList*,const char*); @@ -16446,16 +18338,17 @@ SQLITE_PRIVATE void sqlite3CreateIndex(Parse*,Token*,Token*,SrcList*,ExprList*,i SQLITE_PRIVATE void sqlite3DropIndex(Parse*, SrcList*, int); SQLITE_PRIVATE int sqlite3Select(Parse*, Select*, SelectDest*); SQLITE_PRIVATE Select *sqlite3SelectNew(Parse*,ExprList*,SrcList*,Expr*,ExprList*, - Expr*,ExprList*,u32,Expr*,Expr*); + Expr*,ExprList*,u32,Expr*); SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3*, Select*); SQLITE_PRIVATE Table *sqlite3SrcListLookup(Parse*, SrcList*); SQLITE_PRIVATE int sqlite3IsReadOnly(Parse*, Table*, int); SQLITE_PRIVATE void sqlite3OpenTable(Parse*, int iCur, int iDb, Table*, int); #if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) -SQLITE_PRIVATE Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,Expr*,char*); +SQLITE_PRIVATE Expr *sqlite3LimitWhere(Parse*,SrcList*,Expr*,ExprList*,Expr*,char*); #endif -SQLITE_PRIVATE void sqlite3DeleteFrom(Parse*, SrcList*, Expr*); -SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*, Expr*, int); +SQLITE_PRIVATE void sqlite3DeleteFrom(Parse*, SrcList*, Expr*, ExprList*, Expr*); +SQLITE_PRIVATE void sqlite3Update(Parse*, SrcList*, ExprList*,Expr*,int,ExprList*,Expr*, + Upsert*); SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin(Parse*,SrcList*,Expr*,ExprList*,ExprList*,u16,int); SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo*); SQLITE_PRIVATE LogEst sqlite3WhereOutputRowCount(WhereInfo*); @@ -16506,9 +18399,11 @@ SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3*,int,const char*); SQLITE_PRIVATE void sqlite3Vacuum(Parse*,Token*); SQLITE_PRIVATE int sqlite3RunVacuum(char**, sqlite3*, int); SQLITE_PRIVATE char *sqlite3NameFromToken(sqlite3*, Token*); -SQLITE_PRIVATE int sqlite3ExprCompare(Expr*, Expr*, int); +SQLITE_PRIVATE int sqlite3ExprCompare(Parse*,Expr*, Expr*, int); +SQLITE_PRIVATE int sqlite3ExprCompareSkip(Expr*, Expr*, int); SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList*, ExprList*, int); -SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Expr*, Expr*, int); +SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Parse*,Expr*, Expr*, int); +SQLITE_PRIVATE int sqlite3ExprImpliesNonNullRow(Expr*,int); SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext*, Expr*); SQLITE_PRIVATE void sqlite3ExprAnalyzeAggList(NameContext*,ExprList*); SQLITE_PRIVATE int sqlite3ExprCoveredByIndex(Expr*, int iCur, Index *pIdx); @@ -16522,14 +18417,16 @@ SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3*,int); SQLITE_PRIVATE void sqlite3CodeVerifySchema(Parse*, int); SQLITE_PRIVATE void sqlite3CodeVerifyNamedSchema(Parse*, const char *zDb); SQLITE_PRIVATE void sqlite3BeginTransaction(Parse*, int); -SQLITE_PRIVATE void sqlite3CommitTransaction(Parse*); -SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse*); +SQLITE_PRIVATE void sqlite3EndTransaction(Parse*,int); SQLITE_PRIVATE void sqlite3Savepoint(Parse*, int, Token*); SQLITE_PRIVATE void sqlite3CloseSavepoints(sqlite3 *); SQLITE_PRIVATE void sqlite3LeaveMutexAndCloseZombie(sqlite3*); +SQLITE_PRIVATE int sqlite3ExprIdToTrueFalse(Expr*); +SQLITE_PRIVATE int sqlite3ExprTruthValue(const Expr*); SQLITE_PRIVATE int sqlite3ExprIsConstant(Expr*); SQLITE_PRIVATE int sqlite3ExprIsConstantNotJoin(Expr*); SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr*, u8); +SQLITE_PRIVATE int sqlite3ExprIsConstantOrGroupBy(Parse*, Expr*, ExprList*); SQLITE_PRIVATE int sqlite3ExprIsTableConstant(Expr*,int); #ifdef SQLITE_ENABLE_CURSOR_HINTS SQLITE_PRIVATE int sqlite3ExprContainsSubquery(Expr*); @@ -16544,7 +18441,7 @@ SQLITE_PRIVATE void sqlite3GenerateRowIndexDelete(Parse*, Table*, int, int, int* SQLITE_PRIVATE int sqlite3GenerateIndexKey(Parse*, Index*, int, int, int, int*,Index*,int); SQLITE_PRIVATE void sqlite3ResolvePartIdxLabel(Parse*,int); SQLITE_PRIVATE void sqlite3GenerateConstraintChecks(Parse*,Table*,int*,int,int,int,int, - u8,u8,int,int*,int*); + u8,u8,int,int*,int*,Upsert*); #ifdef SQLITE_ENABLE_NULL_TRIM SQLITE_PRIVATE void sqlite3SetMakeRecordP5(Vdbe*,Table*); #else @@ -16578,7 +18475,7 @@ SQLITE_PRIVATE int sqlite3SafetyCheckSickOrOk(sqlite3*); SQLITE_PRIVATE void sqlite3ChangeCookie(Parse*, int); #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) -SQLITE_PRIVATE void sqlite3MaterializeView(Parse*, Table*, Expr*, int); +SQLITE_PRIVATE void sqlite3MaterializeView(Parse*, Table*, Expr*, ExprList*,Expr*,int); #endif #ifndef SQLITE_OMIT_TRIGGER @@ -16594,11 +18491,15 @@ SQLITE_PRIVATE void sqlite3CodeRowTrigger(Parse*, Trigger *, int, ExprList*, i SQLITE_PRIVATE void sqlite3CodeRowTriggerDirect(Parse *, Trigger *, Table *, int, int, int); void sqliteViewTriggers(Parse*, Table*, Expr*, int, ExprList*); SQLITE_PRIVATE void sqlite3DeleteTriggerStep(sqlite3*, TriggerStep*); -SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*); +SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3*,Select*, + const char*,const char*); SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep(sqlite3*,Token*, IdList*, - Select*,u8); -SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8); -SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*); + Select*,u8,Upsert*, + const char*,const char*); +SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep(sqlite3*,Token*,ExprList*, Expr*, u8, + const char*,const char*); +SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep(sqlite3*,Token*, Expr*, + const char*,const char*); SQLITE_PRIVATE void sqlite3DeleteTrigger(sqlite3*, Trigger*); SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTrigger(sqlite3*,int,const char*); SQLITE_PRIVATE u32 sqlite3TriggerColmask(Parse*,Trigger*,ExprList*,int,int,Table*,int); @@ -16643,7 +18544,9 @@ SQLITE_PRIVATE int sqlite3FixTriggerStep(DbFixer*, TriggerStep*); SQLITE_PRIVATE int sqlite3AtoF(const char *z, double*, int, u8); SQLITE_PRIVATE int sqlite3GetInt32(const char *, int*); SQLITE_PRIVATE int sqlite3Atoi(const char*); +#ifndef SQLITE_OMIT_UTF16 SQLITE_PRIVATE int sqlite3Utf16ByteLen(const void *pData, int nChar); +#endif SQLITE_PRIVATE int sqlite3Utf8CharLen(const char *pData, int nByte); SQLITE_PRIVATE u32 sqlite3Utf8Read(const u8**); SQLITE_PRIVATE LogEst sqlite3LogEst(u64); @@ -16703,11 +18606,17 @@ SQLITE_PRIVATE int sqlite3TwoPartName(Parse *, Token *, Token *, Token **); SQLITE_PRIVATE const char *sqlite3ErrName(int); #endif +#ifdef SQLITE_ENABLE_DESERIALIZE +SQLITE_PRIVATE int sqlite3MemdbInit(void); +#endif + SQLITE_PRIVATE const char *sqlite3ErrStr(int); SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse); SQLITE_PRIVATE CollSeq *sqlite3FindCollSeq(sqlite3*,u8 enc, const char*,int); SQLITE_PRIVATE CollSeq *sqlite3LocateCollSeq(Parse *pParse, const char*zName); SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr); +SQLITE_PRIVATE CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr); +SQLITE_PRIVATE int sqlite3ExprCollSeqMatch(Parse*,Expr*,Expr*); SQLITE_PRIVATE Expr *sqlite3ExprAddCollateToken(Parse *pParse, Expr*, const Token*, int); SQLITE_PRIVATE Expr *sqlite3ExprAddCollateString(Parse*,Expr*,const char*); SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr*); @@ -16732,7 +18641,9 @@ SQLITE_PRIVATE void sqlite3ValueSetStr(sqlite3_value*, int, const void *,u8, SQLITE_PRIVATE void sqlite3ValueSetNull(sqlite3_value*); SQLITE_PRIVATE void sqlite3ValueFree(sqlite3_value*); SQLITE_PRIVATE sqlite3_value *sqlite3ValueNew(sqlite3 *); +#ifndef SQLITE_OMIT_UTF16 SQLITE_PRIVATE char *sqlite3Utf16to8(sqlite3 *, const void*, int, u8); +#endif SQLITE_PRIVATE int sqlite3ValueFromExpr(sqlite3 *, Expr *, u8, u8, sqlite3_value **); SQLITE_PRIVATE void sqlite3ValueApplyAffinity(sqlite3_value *, u8, u8); #ifndef SQLITE_AMALGAMATION @@ -16747,6 +18658,9 @@ SQLITE_PRIVATE FuncDefHash sqlite3BuiltinFunctions; SQLITE_PRIVATE int sqlite3PendingByte; #endif #endif +#ifdef VDBE_PROFILE +SQLITE_PRIVATE sqlite3_uint64 sqlite3NProfileCnt; +#endif SQLITE_PRIVATE void sqlite3RootPageMoved(sqlite3*, int, int, int); SQLITE_PRIVATE void sqlite3Reindex(Parse*, Token*, Token*); SQLITE_PRIVATE void sqlite3AlterFunctions(void); @@ -16767,9 +18681,9 @@ SQLITE_PRIVATE void sqlite3ColumnDefault(Vdbe *, Table *, int, int); SQLITE_PRIVATE void sqlite3AlterFinishAddColumn(Parse *, Token *); SQLITE_PRIVATE void sqlite3AlterBeginAddColumn(Parse *, SrcList *); SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq(Parse*, u8, CollSeq *, const char*); -SQLITE_PRIVATE char sqlite3AffinityType(const char*, u8*); +SQLITE_PRIVATE char sqlite3AffinityType(const char*, Column*); SQLITE_PRIVATE void sqlite3Analyze(Parse*, Token*, Token*); -SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler*); +SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler*, sqlite3_file*); SQLITE_PRIVATE int sqlite3FindDb(sqlite3*, Token*); SQLITE_PRIVATE int sqlite3FindDbName(sqlite3 *, const char *); SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3*,int iDB); @@ -16792,17 +18706,14 @@ SQLITE_PRIVATE int sqlite3CreateFunc(sqlite3 *, const char *, int, int, void *, void (*)(sqlite3_context*,int,sqlite3_value **), void (*)(sqlite3_context*), FuncDestructor *pDestructor ); +SQLITE_PRIVATE void sqlite3NoopDestructor(void*); SQLITE_PRIVATE void sqlite3OomFault(sqlite3*); SQLITE_PRIVATE void sqlite3OomClear(sqlite3*); SQLITE_PRIVATE int sqlite3ApiExit(sqlite3 *db, int); SQLITE_PRIVATE int sqlite3OpenTempDatabase(Parse *); SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum*, sqlite3*, char*, int, int); -SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum*,const char*,int); -SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum*,const char*); -SQLITE_PRIVATE void sqlite3AppendChar(StrAccum*,int,char); SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum*); -SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum*); SQLITE_PRIVATE void sqlite3SelectDestInit(SelectDest*,int,int); SQLITE_PRIVATE Expr *sqlite3CreateColumnExpr(sqlite3 *, SrcList *, int, int); @@ -16829,10 +18740,10 @@ SQLITE_PRIVATE char sqlite3IndexColumnAffinity(sqlite3*, Index*, int); ** The interface to the LEMON-generated parser */ #ifndef SQLITE_AMALGAMATION -SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64)); +SQLITE_PRIVATE void *sqlite3ParserAlloc(void*(*)(u64), Parse*); SQLITE_PRIVATE void sqlite3ParserFree(void*, void(*)(void*)); #endif -SQLITE_PRIVATE void sqlite3Parser(void*, int, Token, Parse*); +SQLITE_PRIVATE void sqlite3Parser(void*, int, Token); #ifdef YYTRACKMAXSTACKDEPTH SQLITE_PRIVATE int sqlite3ParserStackPeak(void*); #endif @@ -16898,7 +18809,6 @@ SQLITE_PRIVATE int sqlite3VtabCallConnect(Parse*, Table*); SQLITE_PRIVATE int sqlite3VtabCallDestroy(sqlite3*, int, const char *); SQLITE_PRIVATE int sqlite3VtabBegin(sqlite3 *, VTable *); SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction(sqlite3 *,FuncDef*, int nArg, Expr*); -SQLITE_PRIVATE void sqlite3InvalidFunction(sqlite3_context*,int,sqlite3_value**); SQLITE_PRIVATE sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context*); SQLITE_PRIVATE int sqlite3VdbeParameterIndex(Vdbe*, const char*, int); SQLITE_PRIVATE int sqlite3TransferBindings(sqlite3_stmt *, sqlite3_stmt *); @@ -16920,6 +18830,18 @@ SQLITE_PRIVATE void sqlite3WithPush(Parse*, With*, u8); #define sqlite3WithPush(x,y,z) #define sqlite3WithDelete(x,y) #endif +#ifndef SQLITE_OMIT_UPSERT +SQLITE_PRIVATE Upsert *sqlite3UpsertNew(sqlite3*,ExprList*,Expr*,ExprList*,Expr*); +SQLITE_PRIVATE void sqlite3UpsertDelete(sqlite3*,Upsert*); +SQLITE_PRIVATE Upsert *sqlite3UpsertDup(sqlite3*,Upsert*); +SQLITE_PRIVATE int sqlite3UpsertAnalyzeTarget(Parse*,SrcList*,Upsert*); +SQLITE_PRIVATE void sqlite3UpsertDoUpdate(Parse*,Upsert*,Table*,Index*,int); +#else +#define sqlite3UpsertNew(v,w,x,y,z) ((Upsert*)0) +#define sqlite3UpsertDelete(x,y) +#define sqlite3UpsertDup(x,y) ((Upsert*)0) +#endif + /* Declarations for functions in fkey.c. All of these are replaced by ** no-op macros if OMIT_FOREIGN_KEY is defined. In this case no foreign @@ -16989,7 +18911,8 @@ SQLITE_PRIVATE int sqlite3FindInIndex(Parse *, Expr *, u32, int*, int*); SQLITE_PRIVATE int sqlite3JournalOpen(sqlite3_vfs *, const char *, sqlite3_file *, int, int); SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *); -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *); #endif @@ -17021,6 +18944,9 @@ SQLITE_PRIVATE void sqlite3ConnectionClosed(sqlite3 *db); #ifdef SQLITE_DEBUG SQLITE_PRIVATE void sqlite3ParserTrace(FILE*, char *); #endif +#if defined(YYCOVERAGE) +SQLITE_PRIVATE int sqlite3ParserCoverage(FILE*); +#endif /* ** If the SQLITE_ENABLE IOTRACE exists then the global variable @@ -17075,8 +19001,7 @@ SQLITE_PRIVATE int sqlite3MemdebugNoType(void*,u8); #endif #define MEMTYPE_HEAP 0x01 /* General heap allocations */ #define MEMTYPE_LOOKASIDE 0x02 /* Heap that might have been lookaside */ -#define MEMTYPE_SCRATCH 0x04 /* Scratch allocations */ -#define MEMTYPE_PCACHE 0x08 /* Page cache allocations */ +#define MEMTYPE_PCACHE 0x04 /* Page cache allocations */ /* ** Threading interface @@ -17086,6 +19011,9 @@ SQLITE_PRIVATE int sqlite3ThreadCreate(SQLiteThread**,void*(*)(void*),void*); SQLITE_PRIVATE int sqlite3ThreadJoin(SQLiteThread*, void**); #endif +#if defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST) +SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3*); +#endif #if defined(SQLITE_ENABLE_DBSTAT_VTAB) || defined(SQLITE_TEST) SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3*); #endif @@ -17096,6 +19024,10 @@ SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr*, int); SQLITE_PRIVATE Expr *sqlite3ExprForVectorField(Parse*,Expr*,int); SQLITE_PRIVATE void sqlite3VectorErrorMsg(Parse*, Expr*); +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS +SQLITE_PRIVATE const char **sqlite3CompileOptions(int *pnOpt); +#endif + #endif /* SQLITEINT_H */ /************** End of sqliteInt.h *******************************************/ @@ -17239,9 +19171,16 @@ SQLITE_PRIVATE const unsigned char sqlite3CtypeMap[256] = { ** EVIDENCE-OF: R-43642-56306 By default, URI handling is globally ** disabled. The default value may be changed by compiling with the ** SQLITE_USE_URI symbol defined. +** +** URI filenames are enabled by default if SQLITE_HAS_CODEC is +** enabled. */ #ifndef SQLITE_USE_URI -# define SQLITE_USE_URI 0 +# ifdef SQLITE_HAS_CODEC +# define SQLITE_USE_URI 1 +# else +# define SQLITE_USE_URI 0 +# endif #endif /* EVIDENCE-OF: R-38720-18127 The default setting is determined by the @@ -17294,6 +19233,7 @@ SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config = { SQLITE_THREADSAFE==1, /* bFullMutex */ SQLITE_USE_URI, /* bOpenUri */ SQLITE_ALLOW_COVERING_INDEX_SCAN, /* bUseCis */ + 0, /* bSmallMalloc */ 0x7ffffffe, /* mxStrlen */ 0, /* neverCorrupt */ SQLITE_DEFAULT_LOOKASIDE, /* szLookaside, nLookaside */ @@ -17306,9 +19246,6 @@ SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config = { 0, 0, /* mnHeap, mxHeap */ SQLITE_DEFAULT_MMAP_SIZE, /* szMmap */ SQLITE_MAX_MMAP_SIZE, /* mxMmap */ - (void*)0, /* pScratch */ - 0, /* szScratch */ - 0, /* nScratch */ (void*)0, /* pPage */ 0, /* szPage */ SQLITE_DEFAULT_PCACHE_INITSZ, /* nPage */ @@ -17337,7 +19274,8 @@ SQLITE_PRIVATE SQLITE_WSD struct Sqlite3Config sqlite3Config = { 0, /* xTestCallback */ #endif 0, /* bLocaltimeFault */ - 0x7ffffffe /* iOnceResetThreshold */ + 0x7ffffffe, /* iOnceResetThreshold */ + SQLITE_DEFAULT_SORTERREF_SIZE /* szSorterRef */ }; /* @@ -17355,6 +19293,13 @@ SQLITE_PRIVATE const Token sqlite3IntTokens[] = { { "1", 1 } }; +#ifdef VDBE_PROFILE +/* +** The following performance counter can be used in place of +** sqlite3Hwtime() for profiling. This is a no-op on standard builds. +*/ +SQLITE_PRIVATE sqlite3_uint64 sqlite3NProfileCnt = 0; +#endif /* ** The value of the "pending" byte must be 0x40000000 (1 byte past the @@ -17393,466 +19338,6 @@ SQLITE_PRIVATE const unsigned char sqlite3OpcodeProperty[] = OPFLG_INITIALIZER; SQLITE_PRIVATE const char sqlite3StrBINARY[] = "BINARY"; /************** End of global.c **********************************************/ -/************** Begin file ctime.c *******************************************/ -/* -** 2010 February 23 -** -** The author disclaims copyright to this source code. In place of -** a legal notice, here is a blessing: -** -** May you do good and not evil. -** May you find forgiveness for yourself and forgive others. -** May you share freely, never taking more than you give. -** -************************************************************************* -** -** This file implements routines used to report what compile-time options -** SQLite was built with. -*/ - -#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS - -/* #include "sqliteInt.h" */ - -/* -** An array of names of all compile-time options. This array should -** be sorted A-Z. -** -** This array looks large, but in a typical installation actually uses -** only a handful of compile-time options, so most times this array is usually -** rather short and uses little memory space. -*/ -static const char * const azCompileOpt[] = { - -/* These macros are provided to "stringify" the value of the define -** for those options in which the value is meaningful. */ -#define CTIMEOPT_VAL_(opt) #opt -#define CTIMEOPT_VAL(opt) CTIMEOPT_VAL_(opt) - -#if SQLITE_32BIT_ROWID - "32BIT_ROWID", -#endif -#if SQLITE_4_BYTE_ALIGNED_MALLOC - "4_BYTE_ALIGNED_MALLOC", -#endif -#if SQLITE_CASE_SENSITIVE_LIKE - "CASE_SENSITIVE_LIKE", -#endif -#if SQLITE_CHECK_PAGES - "CHECK_PAGES", -#endif -#if defined(__clang__) && defined(__clang_major__) - "COMPILER=clang-" CTIMEOPT_VAL(__clang_major__) "." - CTIMEOPT_VAL(__clang_minor__) "." - CTIMEOPT_VAL(__clang_patchlevel__), -#elif defined(_MSC_VER) - "COMPILER=msvc-" CTIMEOPT_VAL(_MSC_VER), -#elif defined(__GNUC__) && defined(__VERSION__) - "COMPILER=gcc-" __VERSION__, -#endif -#if SQLITE_COVERAGE_TEST - "COVERAGE_TEST", -#endif -#if SQLITE_DEBUG - "DEBUG", -#endif -#if SQLITE_DEFAULT_LOCKING_MODE - "DEFAULT_LOCKING_MODE=" CTIMEOPT_VAL(SQLITE_DEFAULT_LOCKING_MODE), -#endif -#if defined(SQLITE_DEFAULT_MMAP_SIZE) && !defined(SQLITE_DEFAULT_MMAP_SIZE_xc) - "DEFAULT_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_DEFAULT_MMAP_SIZE), -#endif -#if SQLITE_DIRECT_OVERFLOW_READ - "DIRECT_OVERFLOW_READ", -#endif -#if SQLITE_DISABLE_DIRSYNC - "DISABLE_DIRSYNC", -#endif -#if SQLITE_DISABLE_LFS - "DISABLE_LFS", -#endif -#if SQLITE_ENABLE_8_3_NAMES - "ENABLE_8_3_NAMES=" CTIMEOPT_VAL(SQLITE_ENABLE_8_3_NAMES), -#endif -#if SQLITE_ENABLE_API_ARMOR - "ENABLE_API_ARMOR", -#endif -#if SQLITE_ENABLE_ATOMIC_WRITE - "ENABLE_ATOMIC_WRITE", -#endif -#if SQLITE_ENABLE_CEROD - "ENABLE_CEROD", -#endif -#if SQLITE_ENABLE_COLUMN_METADATA - "ENABLE_COLUMN_METADATA", -#endif -#if SQLITE_ENABLE_DBSTAT_VTAB - "ENABLE_DBSTAT_VTAB", -#endif -#if SQLITE_ENABLE_EXPENSIVE_ASSERT - "ENABLE_EXPENSIVE_ASSERT", -#endif -#if SQLITE_ENABLE_FTS1 - "ENABLE_FTS1", -#endif -#if SQLITE_ENABLE_FTS2 - "ENABLE_FTS2", -#endif -#if SQLITE_ENABLE_FTS3 - "ENABLE_FTS3", -#endif -#if SQLITE_ENABLE_FTS3_PARENTHESIS - "ENABLE_FTS3_PARENTHESIS", -#endif -#if SQLITE_ENABLE_FTS4 - "ENABLE_FTS4", -#endif -#if SQLITE_ENABLE_FTS5 - "ENABLE_FTS5", -#endif -#if SQLITE_ENABLE_ICU - "ENABLE_ICU", -#endif -#if SQLITE_ENABLE_IOTRACE - "ENABLE_IOTRACE", -#endif -#if SQLITE_ENABLE_JSON1 - "ENABLE_JSON1", -#endif -#if SQLITE_ENABLE_LOAD_EXTENSION - "ENABLE_LOAD_EXTENSION", -#endif -#if SQLITE_ENABLE_LOCKING_STYLE - "ENABLE_LOCKING_STYLE=" CTIMEOPT_VAL(SQLITE_ENABLE_LOCKING_STYLE), -#endif -#if SQLITE_ENABLE_MEMORY_MANAGEMENT - "ENABLE_MEMORY_MANAGEMENT", -#endif -#if SQLITE_ENABLE_MEMSYS3 - "ENABLE_MEMSYS3", -#endif -#if SQLITE_ENABLE_MEMSYS5 - "ENABLE_MEMSYS5", -#endif -#if SQLITE_ENABLE_OVERSIZE_CELL_CHECK - "ENABLE_OVERSIZE_CELL_CHECK", -#endif -#if SQLITE_ENABLE_RTREE - "ENABLE_RTREE", -#endif -#if defined(SQLITE_ENABLE_STAT4) - "ENABLE_STAT4", -#elif defined(SQLITE_ENABLE_STAT3) - "ENABLE_STAT3", -#endif -#if SQLITE_ENABLE_UNLOCK_NOTIFY - "ENABLE_UNLOCK_NOTIFY", -#endif -#if SQLITE_ENABLE_UPDATE_DELETE_LIMIT - "ENABLE_UPDATE_DELETE_LIMIT", -#endif -#if defined(SQLITE_ENABLE_URI_00_ERROR) - "ENABLE_URI_00_ERROR", -#endif -#if SQLITE_HAS_CODEC - "HAS_CODEC", -#endif -#if HAVE_ISNAN || SQLITE_HAVE_ISNAN - "HAVE_ISNAN", -#endif -#if SQLITE_HOMEGROWN_RECURSIVE_MUTEX - "HOMEGROWN_RECURSIVE_MUTEX", -#endif -#if SQLITE_IGNORE_AFP_LOCK_ERRORS - "IGNORE_AFP_LOCK_ERRORS", -#endif -#if SQLITE_IGNORE_FLOCK_LOCK_ERRORS - "IGNORE_FLOCK_LOCK_ERRORS", -#endif -#ifdef SQLITE_INT64_TYPE - "INT64_TYPE", -#endif -#ifdef SQLITE_LIKE_DOESNT_MATCH_BLOBS - "LIKE_DOESNT_MATCH_BLOBS", -#endif -#if SQLITE_LOCK_TRACE - "LOCK_TRACE", -#endif -#if defined(SQLITE_MAX_MMAP_SIZE) && !defined(SQLITE_MAX_MMAP_SIZE_xc) - "MAX_MMAP_SIZE=" CTIMEOPT_VAL(SQLITE_MAX_MMAP_SIZE), -#endif -#ifdef SQLITE_MAX_SCHEMA_RETRY - "MAX_SCHEMA_RETRY=" CTIMEOPT_VAL(SQLITE_MAX_SCHEMA_RETRY), -#endif -#if SQLITE_MEMDEBUG - "MEMDEBUG", -#endif -#if SQLITE_MIXED_ENDIAN_64BIT_FLOAT - "MIXED_ENDIAN_64BIT_FLOAT", -#endif -#if SQLITE_NO_SYNC - "NO_SYNC", -#endif -#if SQLITE_OMIT_ALTERTABLE - "OMIT_ALTERTABLE", -#endif -#if SQLITE_OMIT_ANALYZE - "OMIT_ANALYZE", -#endif -#if SQLITE_OMIT_ATTACH - "OMIT_ATTACH", -#endif -#if SQLITE_OMIT_AUTHORIZATION - "OMIT_AUTHORIZATION", -#endif -#if SQLITE_OMIT_AUTOINCREMENT - "OMIT_AUTOINCREMENT", -#endif -#if SQLITE_OMIT_AUTOINIT - "OMIT_AUTOINIT", -#endif -#if SQLITE_OMIT_AUTOMATIC_INDEX - "OMIT_AUTOMATIC_INDEX", -#endif -#if SQLITE_OMIT_AUTORESET - "OMIT_AUTORESET", -#endif -#if SQLITE_OMIT_AUTOVACUUM - "OMIT_AUTOVACUUM", -#endif -#if SQLITE_OMIT_BETWEEN_OPTIMIZATION - "OMIT_BETWEEN_OPTIMIZATION", -#endif -#if SQLITE_OMIT_BLOB_LITERAL - "OMIT_BLOB_LITERAL", -#endif -#if SQLITE_OMIT_BTREECOUNT - "OMIT_BTREECOUNT", -#endif -#if SQLITE_OMIT_CAST - "OMIT_CAST", -#endif -#if SQLITE_OMIT_CHECK - "OMIT_CHECK", -#endif -#if SQLITE_OMIT_COMPLETE - "OMIT_COMPLETE", -#endif -#if SQLITE_OMIT_COMPOUND_SELECT - "OMIT_COMPOUND_SELECT", -#endif -#if SQLITE_OMIT_CTE - "OMIT_CTE", -#endif -#if SQLITE_OMIT_DATETIME_FUNCS - "OMIT_DATETIME_FUNCS", -#endif -#if SQLITE_OMIT_DECLTYPE - "OMIT_DECLTYPE", -#endif -#if SQLITE_OMIT_DEPRECATED - "OMIT_DEPRECATED", -#endif -#if SQLITE_OMIT_DISKIO - "OMIT_DISKIO", -#endif -#if SQLITE_OMIT_EXPLAIN - "OMIT_EXPLAIN", -#endif -#if SQLITE_OMIT_FLAG_PRAGMAS - "OMIT_FLAG_PRAGMAS", -#endif -#if SQLITE_OMIT_FLOATING_POINT - "OMIT_FLOATING_POINT", -#endif -#if SQLITE_OMIT_FOREIGN_KEY - "OMIT_FOREIGN_KEY", -#endif -#if SQLITE_OMIT_GET_TABLE - "OMIT_GET_TABLE", -#endif -#if SQLITE_OMIT_INCRBLOB - "OMIT_INCRBLOB", -#endif -#if SQLITE_OMIT_INTEGRITY_CHECK - "OMIT_INTEGRITY_CHECK", -#endif -#if SQLITE_OMIT_LIKE_OPTIMIZATION - "OMIT_LIKE_OPTIMIZATION", -#endif -#if SQLITE_OMIT_LOAD_EXTENSION - "OMIT_LOAD_EXTENSION", -#endif -#if SQLITE_OMIT_LOCALTIME - "OMIT_LOCALTIME", -#endif -#if SQLITE_OMIT_LOOKASIDE - "OMIT_LOOKASIDE", -#endif -#if SQLITE_OMIT_MEMORYDB - "OMIT_MEMORYDB", -#endif -#if SQLITE_OMIT_OR_OPTIMIZATION - "OMIT_OR_OPTIMIZATION", -#endif -#if SQLITE_OMIT_PAGER_PRAGMAS - "OMIT_PAGER_PRAGMAS", -#endif -#if SQLITE_OMIT_PRAGMA - "OMIT_PRAGMA", -#endif -#if SQLITE_OMIT_PROGRESS_CALLBACK - "OMIT_PROGRESS_CALLBACK", -#endif -#if SQLITE_OMIT_QUICKBALANCE - "OMIT_QUICKBALANCE", -#endif -#if SQLITE_OMIT_REINDEX - "OMIT_REINDEX", -#endif -#if SQLITE_OMIT_SCHEMA_PRAGMAS - "OMIT_SCHEMA_PRAGMAS", -#endif -#if SQLITE_OMIT_SCHEMA_VERSION_PRAGMAS - "OMIT_SCHEMA_VERSION_PRAGMAS", -#endif -#if SQLITE_OMIT_SHARED_CACHE - "OMIT_SHARED_CACHE", -#endif -#if SQLITE_OMIT_SUBQUERY - "OMIT_SUBQUERY", -#endif -#if SQLITE_OMIT_TCL_VARIABLE - "OMIT_TCL_VARIABLE", -#endif -#if SQLITE_OMIT_TEMPDB - "OMIT_TEMPDB", -#endif -#if SQLITE_OMIT_TRACE - "OMIT_TRACE", -#endif -#if SQLITE_OMIT_TRIGGER - "OMIT_TRIGGER", -#endif -#if SQLITE_OMIT_TRUNCATE_OPTIMIZATION - "OMIT_TRUNCATE_OPTIMIZATION", -#endif -#if SQLITE_OMIT_UTF16 - "OMIT_UTF16", -#endif -#if SQLITE_OMIT_VACUUM - "OMIT_VACUUM", -#endif -#if SQLITE_OMIT_VIEW - "OMIT_VIEW", -#endif -#if SQLITE_OMIT_VIRTUALTABLE - "OMIT_VIRTUALTABLE", -#endif -#if SQLITE_OMIT_WAL - "OMIT_WAL", -#endif -#if SQLITE_OMIT_WSD - "OMIT_WSD", -#endif -#if SQLITE_OMIT_XFER_OPT - "OMIT_XFER_OPT", -#endif -#if SQLITE_PERFORMANCE_TRACE - "PERFORMANCE_TRACE", -#endif -#if SQLITE_PROXY_DEBUG - "PROXY_DEBUG", -#endif -#if SQLITE_RTREE_INT_ONLY - "RTREE_INT_ONLY", -#endif -#if SQLITE_SECURE_DELETE - "SECURE_DELETE", -#endif -#if SQLITE_SMALL_STACK - "SMALL_STACK", -#endif -#if SQLITE_SOUNDEX - "SOUNDEX", -#endif -#if SQLITE_SYSTEM_MALLOC - "SYSTEM_MALLOC", -#endif -#if SQLITE_TCL - "TCL", -#endif -#if defined(SQLITE_TEMP_STORE) && !defined(SQLITE_TEMP_STORE_xc) - "TEMP_STORE=" CTIMEOPT_VAL(SQLITE_TEMP_STORE), -#endif -#if SQLITE_TEST - "TEST", -#endif -#if defined(SQLITE_THREADSAFE) - "THREADSAFE=" CTIMEOPT_VAL(SQLITE_THREADSAFE), -#endif -#if SQLITE_UNTESTABLE - "UNTESTABLE" -#endif -#if SQLITE_USE_ALLOCA - "USE_ALLOCA", -#endif -#if SQLITE_USER_AUTHENTICATION - "USER_AUTHENTICATION", -#endif -#if SQLITE_WIN32_MALLOC - "WIN32_MALLOC", -#endif -#if SQLITE_ZERO_MALLOC - "ZERO_MALLOC" -#endif -}; - -/* -** Given the name of a compile-time option, return true if that option -** was used and false if not. -** -** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix -** is not required for a match. -*/ -SQLITE_API int sqlite3_compileoption_used(const char *zOptName){ - int i, n; - -#if SQLITE_ENABLE_API_ARMOR - if( zOptName==0 ){ - (void)SQLITE_MISUSE_BKPT; - return 0; - } -#endif - if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7; - n = sqlite3Strlen30(zOptName); - - /* Since ArraySize(azCompileOpt) is normally in single digits, a - ** linear search is adequate. No need for a binary search. */ - for(i=0; i<ArraySize(azCompileOpt); i++){ - if( sqlite3StrNICmp(zOptName, azCompileOpt[i], n)==0 - && sqlite3IsIdChar((unsigned char)azCompileOpt[i][n])==0 - ){ - return 1; - } - } - return 0; -} - -/* -** Return the N-th compile-time option string. If N is out of range, -** return a NULL pointer. -*/ -SQLITE_API const char *sqlite3_compileoption_get(int N){ - if( N>=0 && N<ArraySize(azCompileOpt) ){ - return azCompileOpt[N]; - } - return 0; -} - -#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ - -/************** End of ctime.c ***********************************************/ /************** Begin file status.c ******************************************/ /* ** 2008 June 18 @@ -17970,18 +19455,18 @@ struct VdbeCursor { u32 cacheStatus; /* Cache is valid if this matches Vdbe.cacheCtr */ int seekResult; /* Result of previous sqlite3BtreeMoveto() or 0 ** if there have been no prior seeks on the cursor. */ - /* NB: seekResult does not distinguish between "no seeks have ever occurred - ** on this cursor" and "the most recent seek was an exact match". */ + /* seekResult does not distinguish between "no seeks have ever occurred + ** on this cursor" and "the most recent seek was an exact match". + ** For CURTYPE_PSEUDO, seekResult is the register holding the record */ /* When a new VdbeCursor is allocated, only the fields above are zeroed. ** The fields that follow are uninitialized, and must be individually ** initialized prior to first use. */ VdbeCursor *pAltCursor; /* Associated index cursor from which to read */ union { - BtCursor *pCursor; /* CURTYPE_BTREE. Btree cursor */ - sqlite3_vtab_cursor *pVCur; /* CURTYPE_VTAB. Vtab cursor */ - int pseudoTableReg; /* CURTYPE_PSEUDO. Reg holding content. */ - VdbeSorter *pSorter; /* CURTYPE_SORTER. Sorter object */ + BtCursor *pCursor; /* CURTYPE_BTREE or _PSEUDO. Btree cursor */ + sqlite3_vtab_cursor *pVCur; /* CURTYPE_VTAB. Vtab cursor */ + VdbeSorter *pSorter; /* CURTYPE_SORTER. Sorter object */ } uc; KeyInfo *pKeyInfo; /* Info about index keys needed by index cursors */ u32 iHdrOffset; /* Offset to next unparsed byte of the header */ @@ -18038,6 +19523,7 @@ struct VdbeFrame { i64 *anExec; /* Event counters from parent frame */ Mem *aMem; /* Array of memory cells for parent frame */ VdbeCursor **apCsr; /* Array of Vdbe cursors for parent frame */ + u8 *aOnce; /* Bitmask used by OP_Once */ void *token; /* Copy of SubProgram.token */ i64 lastRowid; /* Last insert rowid (sqlite3.lastRowid) */ AuxData *pAuxData; /* Linked list of auxdata allocations */ @@ -18058,11 +19544,12 @@ struct VdbeFrame { ** structures. Each Mem struct may cache multiple representations (string, ** integer etc.) of the same value. */ -struct Mem { +struct sqlite3_value { union MemValue { double r; /* Real value used when MEM_Real is set in flags */ i64 i; /* Integer value used when MEM_Int is set in flags */ - int nZero; /* Used when bit MEM_Zero is set in flags */ + int nZero; /* Extra zero bytes when MEM_Zero and MEM_Blob set */ + const char *zPType; /* Pointer type when MEM_Term|MEM_Subtype|MEM_Null */ FuncDef *pDef; /* Used only when flags==MEM_Agg */ RowSet *pRowSet; /* Used only when flags==MEM_RowSet */ VdbeFrame *pFrame; /* Used when flags==MEM_Frame */ @@ -18094,7 +19581,8 @@ struct Mem { ** representations of the value stored in the Mem struct. ** ** If the MEM_Null flag is set, then the value is an SQL NULL value. -** No other flags may be set in this case. +** For a pointer type created using sqlite3_bind_pointer() or +** sqlite3_result_pointer() the MEM_Term and MEM_Subtype flags are also set. ** ** If the MEM_Str flag is set then Mem.z points at a string representation. ** Usually this is encoded in the same unicode encoding as the main @@ -18102,7 +19590,7 @@ struct Mem { ** set, then the string is nul terminated. The MEM_Int and MEM_Real ** flags may coexist with the MEM_Str flag. */ -#define MEM_Null 0x0001 /* Value is NULL */ +#define MEM_Null 0x0001 /* Value is NULL (or a pointer) */ #define MEM_Str 0x0002 /* Value is a string */ #define MEM_Int 0x0004 /* Value is an integer */ #define MEM_Real 0x0008 /* Value is a real number */ @@ -18112,7 +19600,7 @@ struct Mem { #define MEM_Frame 0x0040 /* Value is a VdbeFrame object */ #define MEM_Undefined 0x0080 /* Value is undefined */ #define MEM_Cleared 0x0100 /* NULL set by OP_Null, not from data */ -#define MEM_TypeMask 0x81ff /* Mask of type bits */ +#define MEM_TypeMask 0xc1ff /* Mask of type bits */ /* Whenever Mem contains a valid string or blob representation, one of @@ -18120,7 +19608,7 @@ struct Mem { ** policy for Mem.z. The MEM_Term flag tells us whether or not the ** string is \000 or \u0000 terminated */ -#define MEM_Term 0x0200 /* String rep is nul terminated */ +#define MEM_Term 0x0200 /* String in Mem.z is zero terminated */ #define MEM_Dyn 0x0400 /* Need to call Mem.xDel() on Mem.z */ #define MEM_Static 0x0800 /* Mem.z points to a static string */ #define MEM_Ephem 0x1000 /* Mem.z points to an ephemeral string */ @@ -18160,11 +19648,11 @@ struct Mem { ** when the VM is halted (if not before). */ struct AuxData { - int iOp; /* Instruction number of OP_Function opcode */ - int iArg; /* Index of function argument. */ + int iAuxOp; /* Instruction number of OP_Function opcode */ + int iAuxArg; /* Index of function argument. */ void *pAux; /* Aux data pointer */ - void (*xDelete)(void *); /* Destructor for the aux data */ - AuxData *pNext; /* Next element in list */ + void (*xDeleteAux)(void*); /* Destructor for the aux data */ + AuxData *pNextAux; /* Next element in list */ }; /* @@ -18188,7 +19676,6 @@ struct sqlite3_context { int iOp; /* Instruction number of OP_Function */ int isError; /* Error code returned by the function. */ u8 skipFlag; /* Skip accumulator loading if true */ - u8 fErrorOrAux; /* isError!=0 or pVdbe->pAuxData modified */ u8 argc; /* Number of arguments */ sqlite3_value *argv[1]; /* Argument set */ }; @@ -18251,10 +19738,12 @@ struct Vdbe { int nOp; /* Number of instructions in the program */ #ifdef SQLITE_DEBUG int rcApp; /* errcode set by sqlite3_result_error_code() */ + u32 nWrite; /* Number of write operations that have occurred */ #endif u16 nResColumn; /* Number of columns in one row of the result set */ u8 errorAction; /* Recovery action to do in case of an error */ u8 minWriteFileFormat; /* Minimum file format for writable database files */ + u8 prepFlags; /* SQLITE_PREPARE_* flags */ bft expired:1; /* True if the VM needs to be recompiled */ bft doingRerun:1; /* True if rerunning after an auto-reprepare */ bft explain:2; /* True if EXPLAIN present on SQL command */ @@ -18263,10 +19752,9 @@ struct Vdbe { bft usesStmtJournal:1; /* True if uses a statement journal */ bft readOnly:1; /* True for statements that do not write */ bft bIsReader:1; /* True for statements that read */ - bft isPrepareV2:1; /* True if prepared with prepare_v2() */ yDbMask btreeMask; /* Bitmask of db->aDb[] entries referenced */ yDbMask lockMask; /* Subset of btreeMask that requires a lock */ - u32 aCounter[5]; /* Counters used by sqlite3_stmt_status() */ + u32 aCounter[7]; /* Counters used by sqlite3_stmt_status() */ char *zSql; /* Text of the SQL statement that generated this */ void *pFree; /* Free this when deleting the vdbe */ VdbeFrame *pFrame; /* Parent frame */ @@ -18348,6 +19836,7 @@ SQLITE_PRIVATE void sqlite3VdbeMemSetInt64(Mem*, i64); #else SQLITE_PRIVATE void sqlite3VdbeMemSetDouble(Mem*, double); #endif +SQLITE_PRIVATE void sqlite3VdbeMemSetPointer(Mem*, void*, const char*, void(*)(void*)); SQLITE_PRIVATE void sqlite3VdbeMemInit(Mem*,sqlite3*,u16); SQLITE_PRIVATE void sqlite3VdbeMemSetNull(Mem*); SQLITE_PRIVATE void sqlite3VdbeMemSetZeroBlob(Mem*,int); @@ -18357,6 +19846,7 @@ SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem*, u8, u8); SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemIntegerify(Mem*); SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem*); +SQLITE_PRIVATE int sqlite3VdbeBooleanValue(Mem*, int ifNull); SQLITE_PRIVATE void sqlite3VdbeIntegerAffinity(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem*); SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem*); @@ -18379,11 +19869,19 @@ SQLITE_PRIVATE int sqlite3VdbeSorterInit(sqlite3 *, int, VdbeCursor *); SQLITE_PRIVATE void sqlite3VdbeSorterReset(sqlite3 *, VdbeSorter *); SQLITE_PRIVATE void sqlite3VdbeSorterClose(sqlite3 *, VdbeCursor *); SQLITE_PRIVATE int sqlite3VdbeSorterRowkey(const VdbeCursor *, Mem *); -SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *, const VdbeCursor *, int *); +SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *, const VdbeCursor *); SQLITE_PRIVATE int sqlite3VdbeSorterRewind(const VdbeCursor *, int *); SQLITE_PRIVATE int sqlite3VdbeSorterWrite(const VdbeCursor *, Mem *); SQLITE_PRIVATE int sqlite3VdbeSorterCompare(const VdbeCursor *, Mem *, int, int *); +#ifdef SQLITE_DEBUG +SQLITE_PRIVATE void sqlite3VdbeIncrWriteCounter(Vdbe*, VdbeCursor*); +SQLITE_PRIVATE void sqlite3VdbeAssertAbortable(Vdbe*); +#else +# define sqlite3VdbeIncrWriteCounter(V,C) +# define sqlite3VdbeAssertAbortable(V) +#endif + #if !defined(SQLITE_OMIT_SHARED_CACHE) SQLITE_PRIVATE void sqlite3VdbeEnter(Vdbe*); #else @@ -18407,12 +19905,14 @@ SQLITE_PRIVATE int sqlite3VdbeCheckFk(Vdbe *, int); # define sqlite3VdbeCheckFk(p,i) 0 #endif -SQLITE_PRIVATE int sqlite3VdbeMemTranslate(Mem*, u8); #ifdef SQLITE_DEBUG SQLITE_PRIVATE void sqlite3VdbePrintSql(Vdbe*); SQLITE_PRIVATE void sqlite3VdbeMemPrettyPrint(Mem *pMem, char *zBuf); #endif -SQLITE_PRIVATE int sqlite3VdbeMemHandleBom(Mem *pMem); +#ifndef SQLITE_OMIT_UTF16 +SQLITE_PRIVATE int sqlite3VdbeMemTranslate(Mem*, u8); +SQLITE_PRIVATE int sqlite3VdbeMemHandleBom(Mem *pMem); +#endif #ifndef SQLITE_OMIT_INCRBLOB SQLITE_PRIVATE int sqlite3VdbeMemExpandBlob(Mem *); @@ -18533,7 +20033,6 @@ SQLITE_PRIVATE void sqlite3StatusHighwater(int op, int X){ : sqlite3MallocMutex()) ); assert( op==SQLITE_STATUS_MALLOC_SIZE || op==SQLITE_STATUS_PAGECACHE_SIZE - || op==SQLITE_STATUS_SCRATCH_SIZE || op==SQLITE_STATUS_PARSER_STACK ); if( newValue>wsdStat.mxValue[op] ){ wsdStat.mxValue[op] = newValue; @@ -18583,6 +20082,28 @@ SQLITE_API int sqlite3_status(int op, int *pCurrent, int *pHighwater, int resetF } /* +** Return the number of LookasideSlot elements on the linked list +*/ +static u32 countLookasideSlots(LookasideSlot *p){ + u32 cnt = 0; + while( p ){ + p = p->pNext; + cnt++; + } + return cnt; +} + +/* +** Count the number of slots of lookaside memory that are outstanding +*/ +SQLITE_PRIVATE int sqlite3LookasideUsed(sqlite3 *db, int *pHighwater){ + u32 nInit = countLookasideSlots(db->lookaside.pInit); + u32 nFree = countLookasideSlots(db->lookaside.pFree); + if( pHighwater ) *pHighwater = db->lookaside.nSlot - nInit; + return db->lookaside.nSlot - (nInit+nFree); +} + +/* ** Query status information for a single database connection */ SQLITE_API int sqlite3_db_status( @@ -18601,10 +20122,15 @@ SQLITE_API int sqlite3_db_status( sqlite3_mutex_enter(db->mutex); switch( op ){ case SQLITE_DBSTATUS_LOOKASIDE_USED: { - *pCurrent = db->lookaside.nOut; - *pHighwater = db->lookaside.mxOut; + *pCurrent = sqlite3LookasideUsed(db, pHighwater); if( resetFlag ){ - db->lookaside.mxOut = db->lookaside.nOut; + LookasideSlot *p = db->lookaside.pFree; + if( p ){ + while( p->pNext ) p = p->pNext; + p->pNext = db->lookaside.pInit; + db->lookaside.pInit = db->lookaside.pFree; + db->lookaside.pFree = 0; + } } break; } @@ -18722,6 +20248,9 @@ SQLITE_API int sqlite3_db_status( ** pagers the database handle is connected to. *pHighwater is always set ** to zero. */ + case SQLITE_DBSTATUS_CACHE_SPILL: + op = SQLITE_DBSTATUS_CACHE_WRITE+1; + /* Fall through into the next case */ case SQLITE_DBSTATUS_CACHE_HIT: case SQLITE_DBSTATUS_CACHE_MISS: case SQLITE_DBSTATUS_CACHE_WRITE:{ @@ -18804,7 +20333,7 @@ SQLITE_API int sqlite3_db_status( ** ** Jean Meeus ** Astronomical Algorithms, 2nd Edition, 1998 -** ISBM 0-943396-61-1 +** ISBN 0-943396-61-1 ** Willmann-Bell, Inc ** Richmond, Virginia (USA) */ @@ -19151,7 +20680,7 @@ static int parseDateOrTime( return 0; }else if( parseHhMmSs(zDate, p)==0 ){ return 0; - }else if( sqlite3StrICmp(zDate,"now")==0){ + }else if( sqlite3StrICmp(zDate,"now")==0 && sqlite3NotPureFunc(context) ){ return setDateTimeToCurrent(context, p); }else if( sqlite3AtoF(zDate, &r, sqlite3Strlen30(zDate), SQLITE_UTF8) ){ setRawDateNumber(p, r); @@ -19188,8 +20717,10 @@ static void computeYMD(DateTime *p){ p->Y = 2000; p->M = 1; p->D = 1; + }else if( !validJulianDay(p->iJD) ){ + datetimeError(p); + return; }else{ - assert( validJulianDay(p->iJD) ); Z = (int)((p->iJD + 43200000)/86400000); A = (int)((Z - 1867216.25)/36524.25); A = Z + 1 + A - (A/4); @@ -19432,7 +20963,7 @@ static int parseModifier( ** Assuming the current time value is UTC (a.k.a. GMT), shift it to ** show local time. */ - if( sqlite3_stricmp(z, "localtime")==0 ){ + if( sqlite3_stricmp(z, "localtime")==0 && sqlite3NotPureFunc(pCtx) ){ computeJD(p); p->iJD += localtimeOffset(p, pCtx, &rc); clearYMD_HMS_TZ(p); @@ -19458,7 +20989,7 @@ static int parseModifier( } } #ifndef SQLITE_OMIT_LOCALTIME - else if( sqlite3_stricmp(z, "utc")==0 ){ + else if( sqlite3_stricmp(z, "utc")==0 && sqlite3NotPureFunc(pCtx) ){ if( p->tzSet==0 ){ sqlite3_int64 c1; computeJD(p); @@ -19508,18 +21039,19 @@ static int parseModifier( ** or month or year. */ if( sqlite3_strnicmp(z, "start of ", 9)!=0 ) break; + if( !p->validJD && !p->validYMD && !p->validHMS ) break; z += 9; computeYMD(p); p->validHMS = 1; p->h = p->m = 0; p->s = 0.0; + p->rawS = 0; p->validTZ = 0; p->validJD = 0; if( sqlite3_stricmp(z,"month")==0 ){ p->D = 1; rc = 0; }else if( sqlite3_stricmp(z,"year")==0 ){ - computeYMD(p); p->M = 1; p->D = 1; rc = 0; @@ -19993,11 +21525,11 @@ static void currentTimeFunc( SQLITE_PRIVATE void sqlite3RegisterDateTimeFunctions(void){ static FuncDef aDateTimeFuncs[] = { #ifndef SQLITE_OMIT_DATETIME_FUNCS - DFUNCTION(julianday, -1, 0, 0, juliandayFunc ), - DFUNCTION(date, -1, 0, 0, dateFunc ), - DFUNCTION(time, -1, 0, 0, timeFunc ), - DFUNCTION(datetime, -1, 0, 0, datetimeFunc ), - DFUNCTION(strftime, -1, 0, 0, strftimeFunc ), + PURE_DATE(julianday, -1, 0, 0, juliandayFunc ), + PURE_DATE(date, -1, 0, 0, dateFunc ), + PURE_DATE(time, -1, 0, 0, timeFunc ), + PURE_DATE(datetime, -1, 0, 0, datetimeFunc ), + PURE_DATE(strftime, -1, 0, 0, strftimeFunc ), DFUNCTION(current_time, 0, 0, 0, ctimeFunc ), DFUNCTION(current_timestamp, 0, 0, 0, ctimestampFunc), DFUNCTION(current_date, 0, 0, 0, cdateFunc ), @@ -20112,7 +21644,7 @@ SQLITE_PRIVATE int sqlite3OsTruncate(sqlite3_file *id, i64 size){ } SQLITE_PRIVATE int sqlite3OsSync(sqlite3_file *id, int flags){ DO_OS_MALLOC_TEST(id); - return id->pMethods->xSync(id, flags); + return flags ? id->pMethods->xSync(id, flags) : SQLITE_OK; } SQLITE_PRIVATE int sqlite3OsFileSize(sqlite3_file *id, i64 *pSize){ DO_OS_MALLOC_TEST(id); @@ -20139,8 +21671,11 @@ SQLITE_PRIVATE int sqlite3OsCheckReservedLock(sqlite3_file *id, int *pResOut){ ** routine has no return value since the return value would be meaningless. */ SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file *id, int op, void *pArg){ + if( id->pMethods==0 ) return SQLITE_NOTFOUND; #ifdef SQLITE_TEST - if( op!=SQLITE_FCNTL_COMMIT_PHASETWO ){ + if( op!=SQLITE_FCNTL_COMMIT_PHASETWO + && op!=SQLITE_FCNTL_LOCK_TIMEOUT + ){ /* Faults are not injected into COMMIT_PHASETWO because, assuming SQLite ** is using a regular VFS, it is called after the corresponding ** transaction has been committed. Injecting a fault at this point @@ -20157,7 +21692,7 @@ SQLITE_PRIVATE int sqlite3OsFileControl(sqlite3_file *id, int op, void *pArg){ return id->pMethods->xFileControl(id, op, pArg); } SQLITE_PRIVATE void sqlite3OsFileControlHint(sqlite3_file *id, int op, void *pArg){ - (void)id->pMethods->xFileControl(id, op, pArg); + if( id->pMethods ) (void)id->pMethods->xFileControl(id, op, pArg); } SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id){ @@ -20167,6 +21702,7 @@ SQLITE_PRIVATE int sqlite3OsSectorSize(sqlite3_file *id){ SQLITE_PRIVATE int sqlite3OsDeviceCharacteristics(sqlite3_file *id){ return id->pMethods->xDeviceCharacteristics(id); } +#ifndef SQLITE_OMIT_WAL SQLITE_PRIVATE int sqlite3OsShmLock(sqlite3_file *id, int offset, int n, int flags){ return id->pMethods->xShmLock(id, offset, n, flags); } @@ -20186,6 +21722,7 @@ SQLITE_PRIVATE int sqlite3OsShmMap( DO_OS_MALLOC_TEST(id); return id->pMethods->xShmMap(id, iPage, pgsz, bExtend, pp); } +#endif /* SQLITE_OMIT_WAL */ #if SQLITE_MAX_MMAP_SIZE>0 /* The real implementation of xFetch and xUnfetch */ @@ -20641,7 +22178,9 @@ SQLITE_PRIVATE void sqlite3MemSetDefault(void){ */ #include <sys/sysctl.h> #include <malloc/malloc.h> +#ifdef SQLITE_MIGHT_BE_SINGLE_CORE #include <libkern/OSAtomic.h> +#endif /* SQLITE_MIGHT_BE_SINGLE_CORE */ static malloc_zone_t* _sqliteZone_; #define SQLITE_MALLOC(x) malloc_zone_malloc(_sqliteZone_, (x)) #define SQLITE_FREE(x) malloc_zone_free(_sqliteZone_, (x)); @@ -20834,19 +22373,10 @@ static int sqlite3MemInit(void *NotUsed){ }else{ /* only 1 core, use our own zone to contention over global locks, ** e.g. we have our own dedicated locks */ - bool success; - malloc_zone_t* newzone = malloc_create_zone(4096, 0); - malloc_set_zone_name(newzone, "Sqlite_Heap"); - do{ - success = OSAtomicCompareAndSwapPtrBarrier(NULL, newzone, - (void * volatile *)&_sqliteZone_); - }while(!_sqliteZone_); - if( !success ){ - /* somebody registered a zone first */ - malloc_destroy_zone(newzone); - } + _sqliteZone_ = malloc_create_zone(4096, 0); + malloc_set_zone_name(_sqliteZone_, "Sqlite_Heap"); } -#endif +#endif /* defined(__APPLE__) && !defined(SQLITE_WITHOUT_ZONEMALLOC) */ UNUSED_PARAMETER(NotUsed); return SQLITE_OK; } @@ -22711,6 +24241,193 @@ static SQLITE_WSD int mutexIsInit = 0; #ifndef SQLITE_MUTEX_OMIT + +#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS +/* +** This block (enclosed by SQLITE_ENABLE_MULTITHREADED_CHECKS) contains +** the implementation of a wrapper around the system default mutex +** implementation (sqlite3DefaultMutex()). +** +** Most calls are passed directly through to the underlying default +** mutex implementation. Except, if a mutex is configured by calling +** sqlite3MutexWarnOnContention() on it, then if contention is ever +** encountered within xMutexEnter() a warning is emitted via sqlite3_log(). +** +** This type of mutex is used as the database handle mutex when testing +** apps that usually use SQLITE_CONFIG_MULTITHREAD mode. +*/ + +/* +** Type for all mutexes used when SQLITE_ENABLE_MULTITHREADED_CHECKS +** is defined. Variable CheckMutex.mutex is a pointer to the real mutex +** allocated by the system mutex implementation. Variable iType is usually set +** to the type of mutex requested - SQLITE_MUTEX_RECURSIVE, SQLITE_MUTEX_FAST +** or one of the static mutex identifiers. Or, if this is a recursive mutex +** that has been configured using sqlite3MutexWarnOnContention(), it is +** set to SQLITE_MUTEX_WARNONCONTENTION. +*/ +typedef struct CheckMutex CheckMutex; +struct CheckMutex { + int iType; + sqlite3_mutex *mutex; +}; + +#define SQLITE_MUTEX_WARNONCONTENTION (-1) + +/* +** Pointer to real mutex methods object used by the CheckMutex +** implementation. Set by checkMutexInit(). +*/ +static SQLITE_WSD const sqlite3_mutex_methods *pGlobalMutexMethods; + +#ifdef SQLITE_DEBUG +static int checkMutexHeld(sqlite3_mutex *p){ + return pGlobalMutexMethods->xMutexHeld(((CheckMutex*)p)->mutex); +} +static int checkMutexNotheld(sqlite3_mutex *p){ + return pGlobalMutexMethods->xMutexNotheld(((CheckMutex*)p)->mutex); +} +#endif + +/* +** Initialize and deinitialize the mutex subsystem. +*/ +static int checkMutexInit(void){ + pGlobalMutexMethods = sqlite3DefaultMutex(); + return SQLITE_OK; +} +static int checkMutexEnd(void){ + pGlobalMutexMethods = 0; + return SQLITE_OK; +} + +/* +** Allocate a mutex. +*/ +static sqlite3_mutex *checkMutexAlloc(int iType){ + static CheckMutex staticMutexes[] = { + {2, 0}, {3, 0}, {4, 0}, {5, 0}, + {6, 0}, {7, 0}, {8, 0}, {9, 0}, + {10, 0}, {11, 0}, {12, 0}, {13, 0} + }; + CheckMutex *p = 0; + + assert( SQLITE_MUTEX_RECURSIVE==1 && SQLITE_MUTEX_FAST==0 ); + if( iType<2 ){ + p = sqlite3MallocZero(sizeof(CheckMutex)); + if( p==0 ) return 0; + p->iType = iType; + }else{ +#ifdef SQLITE_ENABLE_API_ARMOR + if( iType-2>=ArraySize(staticMutexes) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + p = &staticMutexes[iType-2]; + } + + if( p->mutex==0 ){ + p->mutex = pGlobalMutexMethods->xMutexAlloc(iType); + if( p->mutex==0 ){ + if( iType<2 ){ + sqlite3_free(p); + } + p = 0; + } + } + + return (sqlite3_mutex*)p; +} + +/* +** Free a mutex. +*/ +static void checkMutexFree(sqlite3_mutex *p){ + assert( SQLITE_MUTEX_RECURSIVE<2 ); + assert( SQLITE_MUTEX_FAST<2 ); + assert( SQLITE_MUTEX_WARNONCONTENTION<2 ); + +#if SQLITE_ENABLE_API_ARMOR + if( ((CheckMutex*)p)->iType<2 ) +#endif + { + CheckMutex *pCheck = (CheckMutex*)p; + pGlobalMutexMethods->xMutexFree(pCheck->mutex); + sqlite3_free(pCheck); + } +#ifdef SQLITE_ENABLE_API_ARMOR + else{ + (void)SQLITE_MISUSE_BKPT; + } +#endif +} + +/* +** Enter the mutex. +*/ +static void checkMutexEnter(sqlite3_mutex *p){ + CheckMutex *pCheck = (CheckMutex*)p; + if( pCheck->iType==SQLITE_MUTEX_WARNONCONTENTION ){ + if( SQLITE_OK==pGlobalMutexMethods->xMutexTry(pCheck->mutex) ){ + return; + } + sqlite3_log(SQLITE_MISUSE, + "illegal multi-threaded access to database connection" + ); + } + pGlobalMutexMethods->xMutexEnter(pCheck->mutex); +} + +/* +** Enter the mutex (do not block). +*/ +static int checkMutexTry(sqlite3_mutex *p){ + CheckMutex *pCheck = (CheckMutex*)p; + return pGlobalMutexMethods->xMutexTry(pCheck->mutex); +} + +/* +** Leave the mutex. +*/ +static void checkMutexLeave(sqlite3_mutex *p){ + CheckMutex *pCheck = (CheckMutex*)p; + pGlobalMutexMethods->xMutexLeave(pCheck->mutex); +} + +sqlite3_mutex_methods const *multiThreadedCheckMutex(void){ + static const sqlite3_mutex_methods sMutex = { + checkMutexInit, + checkMutexEnd, + checkMutexAlloc, + checkMutexFree, + checkMutexEnter, + checkMutexTry, + checkMutexLeave, +#ifdef SQLITE_DEBUG + checkMutexHeld, + checkMutexNotheld +#else + 0, + 0 +#endif + }; + return &sMutex; +} + +/* +** Mark the SQLITE_MUTEX_RECURSIVE mutex passed as the only argument as +** one on which there should be no contention. +*/ +SQLITE_PRIVATE void sqlite3MutexWarnOnContention(sqlite3_mutex *p){ + if( sqlite3GlobalConfig.mutex.xMutexAlloc==checkMutexAlloc ){ + CheckMutex *pCheck = (CheckMutex*)p; + assert( pCheck->iType==SQLITE_MUTEX_RECURSIVE ); + pCheck->iType = SQLITE_MUTEX_WARNONCONTENTION; + } +} +#endif /* ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS */ + /* ** Initialize the mutex system. */ @@ -22726,7 +24443,11 @@ SQLITE_PRIVATE int sqlite3MutexInit(void){ sqlite3_mutex_methods *pTo = &sqlite3GlobalConfig.mutex; if( sqlite3GlobalConfig.bCoreMutex ){ +#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS + pFrom = multiThreadedCheckMutex(); +#else pFrom = sqlite3DefaultMutex(); +#endif }else{ pFrom = sqlite3NoopMutex(); } @@ -23125,11 +24846,12 @@ struct sqlite3_mutex { #endif }; #if SQLITE_MUTEX_NREF -#define SQLITE3_MUTEX_INITIALIZER {PTHREAD_MUTEX_INITIALIZER,0,0,(pthread_t)0,0} +# define SQLITE3_MUTEX_INITIALIZER(id) \ + {PTHREAD_MUTEX_INITIALIZER,id,0,(pthread_t)0,0} #elif defined(SQLITE_ENABLE_API_ARMOR) -#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER, 0 } +# define SQLITE3_MUTEX_INITIALIZER(id) { PTHREAD_MUTEX_INITIALIZER, id } #else -#define SQLITE3_MUTEX_INITIALIZER { PTHREAD_MUTEX_INITIALIZER } +#define SQLITE3_MUTEX_INITIALIZER(id) { PTHREAD_MUTEX_INITIALIZER } #endif /* @@ -23226,18 +24948,18 @@ static int pthreadMutexEnd(void){ return SQLITE_OK; } */ static sqlite3_mutex *pthreadMutexAlloc(int iType){ static sqlite3_mutex staticMutexes[] = { - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER + SQLITE3_MUTEX_INITIALIZER(2), + SQLITE3_MUTEX_INITIALIZER(3), + SQLITE3_MUTEX_INITIALIZER(4), + SQLITE3_MUTEX_INITIALIZER(5), + SQLITE3_MUTEX_INITIALIZER(6), + SQLITE3_MUTEX_INITIALIZER(7), + SQLITE3_MUTEX_INITIALIZER(8), + SQLITE3_MUTEX_INITIALIZER(9), + SQLITE3_MUTEX_INITIALIZER(10), + SQLITE3_MUTEX_INITIALIZER(11), + SQLITE3_MUTEX_INITIALIZER(12), + SQLITE3_MUTEX_INITIALIZER(13) }; sqlite3_mutex *p; switch( iType ){ @@ -23256,6 +24978,9 @@ static sqlite3_mutex *pthreadMutexAlloc(int iType){ pthread_mutex_init(&p->mutex, &recursiveAttr); pthread_mutexattr_destroy(&recursiveAttr); #endif +#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR) + p->id = SQLITE_MUTEX_RECURSIVE; +#endif } break; } @@ -23263,6 +24988,9 @@ static sqlite3_mutex *pthreadMutexAlloc(int iType){ p = sqlite3MallocZero( sizeof(*p) ); if( p ){ pthread_mutex_init(&p->mutex, 0); +#if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR) + p->id = SQLITE_MUTEX_FAST; +#endif } break; } @@ -23278,7 +25006,7 @@ static sqlite3_mutex *pthreadMutexAlloc(int iType){ } } #if SQLITE_MUTEX_NREF || defined(SQLITE_ENABLE_API_ARMOR) - if( p ) p->id = iType; + assert( p==0 || p->id==iType ); #endif return p; } @@ -23795,7 +25523,7 @@ struct sqlite3_mutex { #ifdef SQLITE_DEBUG volatile int nRef; /* Number of enterances */ volatile DWORD owner; /* Thread holding this mutex */ - volatile int trace; /* True to trace changes */ + volatile LONG trace; /* True to trace changes */ #endif }; @@ -23807,10 +25535,10 @@ struct sqlite3_mutex { #define SQLITE_W32_MUTEX_INITIALIZER { 0 } #ifdef SQLITE_DEBUG -#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0, \ +#define SQLITE3_MUTEX_INITIALIZER(id) { SQLITE_W32_MUTEX_INITIALIZER, id, \ 0L, (DWORD)0, 0 } #else -#define SQLITE3_MUTEX_INITIALIZER { SQLITE_W32_MUTEX_INITIALIZER, 0 } +#define SQLITE3_MUTEX_INITIALIZER(id) { SQLITE_W32_MUTEX_INITIALIZER, id } #endif #ifdef SQLITE_DEBUG @@ -23853,18 +25581,18 @@ SQLITE_PRIVATE void sqlite3MemoryBarrier(void){ ** Initialize and deinitialize the mutex subsystem. */ static sqlite3_mutex winMutex_staticMutexes[] = { - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER, - SQLITE3_MUTEX_INITIALIZER + SQLITE3_MUTEX_INITIALIZER(2), + SQLITE3_MUTEX_INITIALIZER(3), + SQLITE3_MUTEX_INITIALIZER(4), + SQLITE3_MUTEX_INITIALIZER(5), + SQLITE3_MUTEX_INITIALIZER(6), + SQLITE3_MUTEX_INITIALIZER(7), + SQLITE3_MUTEX_INITIALIZER(8), + SQLITE3_MUTEX_INITIALIZER(9), + SQLITE3_MUTEX_INITIALIZER(10), + SQLITE3_MUTEX_INITIALIZER(11), + SQLITE3_MUTEX_INITIALIZER(12), + SQLITE3_MUTEX_INITIALIZER(13) }; static int winMutex_isInit = 0; @@ -23994,15 +25722,15 @@ static sqlite3_mutex *winMutexAlloc(int iType){ } #endif p = &winMutex_staticMutexes[iType-2]; - p->id = iType; #ifdef SQLITE_DEBUG #ifdef SQLITE_WIN32_MUTEX_TRACE_STATIC - p->trace = 1; + InterlockedCompareExchange(&p->trace, 1, 0); #endif #endif break; } } + assert( p==0 || p->id==iType ); return p; } @@ -24053,8 +25781,8 @@ static void winMutexEnter(sqlite3_mutex *p){ p->owner = tid; p->nRef++; if( p->trace ){ - OSTRACE(("ENTER-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n", - tid, p, p->trace, p->nRef)); + OSTRACE(("ENTER-MUTEX tid=%lu, mutex(%d)=%p (%d), nRef=%d\n", + tid, p->id, p, p->trace, p->nRef)); } #endif } @@ -24096,8 +25824,8 @@ static int winMutexTry(sqlite3_mutex *p){ #endif #ifdef SQLITE_DEBUG if( p->trace ){ - OSTRACE(("TRY-MUTEX tid=%lu, mutex=%p (%d), owner=%lu, nRef=%d, rc=%s\n", - tid, p, p->trace, p->owner, p->nRef, sqlite3ErrName(rc))); + OSTRACE(("TRY-MUTEX tid=%lu, mutex(%d)=%p (%d), owner=%lu, nRef=%d, rc=%s\n", + tid, p->id, p, p->trace, p->owner, p->nRef, sqlite3ErrName(rc))); } #endif return rc; @@ -24125,8 +25853,8 @@ static void winMutexLeave(sqlite3_mutex *p){ LeaveCriticalSection(&p->mutex); #ifdef SQLITE_DEBUG if( p->trace ){ - OSTRACE(("LEAVE-MUTEX tid=%lu, mutex=%p (%d), nRef=%d\n", - tid, p, p->trace, p->nRef)); + OSTRACE(("LEAVE-MUTEX tid=%lu, mutex(%d)=%p (%d), nRef=%d\n", + tid, p->id, p, p->trace, p->nRef)); } #endif } @@ -24190,14 +25918,6 @@ SQLITE_API int sqlite3_release_memory(int n){ } /* -** An instance of the following object records the location of -** each unused scratch buffer. -*/ -typedef struct ScratchFreeslot { - struct ScratchFreeslot *pNext; /* Next unused scratch buffer */ -} ScratchFreeslot; - -/* ** State information local to the memory allocation subsystem. */ static SQLITE_WSD struct Mem0Global { @@ -24205,21 +25925,11 @@ static SQLITE_WSD struct Mem0Global { sqlite3_int64 alarmThreshold; /* The soft heap limit */ /* - ** Pointers to the end of sqlite3GlobalConfig.pScratch memory - ** (so that a range test can be used to determine if an allocation - ** being freed came from pScratch) and a pointer to the list of - ** unused scratch allocations. - */ - void *pScratchEnd; - ScratchFreeslot *pScratchFree; - u32 nScratchFree; - - /* ** True if heap is nearly "full" where "full" is defined by the ** sqlite3_soft_heap_limit() setting. */ int nearlyFull; -} mem0 = { 0, 0, 0, 0, 0, 0 }; +} mem0 = { 0, 0, 0 }; #define mem0 GLOBAL(struct Mem0Global, mem0) @@ -24289,28 +25999,6 @@ SQLITE_PRIVATE int sqlite3MallocInit(void){ } memset(&mem0, 0, sizeof(mem0)); mem0.mutex = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_MEM); - if( sqlite3GlobalConfig.pScratch && sqlite3GlobalConfig.szScratch>=100 - && sqlite3GlobalConfig.nScratch>0 ){ - int i, n, sz; - ScratchFreeslot *pSlot; - sz = ROUNDDOWN8(sqlite3GlobalConfig.szScratch); - sqlite3GlobalConfig.szScratch = sz; - pSlot = (ScratchFreeslot*)sqlite3GlobalConfig.pScratch; - n = sqlite3GlobalConfig.nScratch; - mem0.pScratchFree = pSlot; - mem0.nScratchFree = n; - for(i=0; i<n-1; i++){ - pSlot->pNext = (ScratchFreeslot*)(sz+(char*)pSlot); - pSlot = pSlot->pNext; - } - pSlot->pNext = 0; - mem0.pScratchEnd = (void*)&pSlot[1]; - }else{ - mem0.pScratchEnd = 0; - sqlite3GlobalConfig.pScratch = 0; - sqlite3GlobalConfig.szScratch = 0; - sqlite3GlobalConfig.nScratch = 0; - } if( sqlite3GlobalConfig.pPage==0 || sqlite3GlobalConfig.szPage<512 || sqlite3GlobalConfig.nPage<=0 ){ sqlite3GlobalConfig.pPage = 0; @@ -24387,6 +26075,13 @@ static void mallocWithAlarm(int n, void **pp){ ** following xRoundup() call. */ nFull = sqlite3GlobalConfig.m.xRoundup(n); +#ifdef SQLITE_MAX_MEMORY + if( sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED)+nFull>SQLITE_MAX_MEMORY ){ + *pp = 0; + return; + } +#endif + sqlite3StatusHighwater(SQLITE_STATUS_MALLOC_SIZE, n); if( mem0.alarmThreshold>0 ){ sqlite3_int64 nUsed = sqlite3StatusValue(SQLITE_STATUS_MEMORY_USED); @@ -24455,105 +26150,6 @@ SQLITE_API void *sqlite3_malloc64(sqlite3_uint64 n){ } /* -** Each thread may only have a single outstanding allocation from -** xScratchMalloc(). We verify this constraint in the single-threaded -** case by setting scratchAllocOut to 1 when an allocation -** is outstanding clearing it when the allocation is freed. -*/ -#if SQLITE_THREADSAFE==0 && !defined(NDEBUG) -static int scratchAllocOut = 0; -#endif - - -/* -** Allocate memory that is to be used and released right away. -** This routine is similar to alloca() in that it is not intended -** for situations where the memory might be held long-term. This -** routine is intended to get memory to old large transient data -** structures that would not normally fit on the stack of an -** embedded processor. -*/ -SQLITE_PRIVATE void *sqlite3ScratchMalloc(int n){ - void *p; - assert( n>0 ); - - sqlite3_mutex_enter(mem0.mutex); - sqlite3StatusHighwater(SQLITE_STATUS_SCRATCH_SIZE, n); - if( mem0.nScratchFree && sqlite3GlobalConfig.szScratch>=n ){ - p = mem0.pScratchFree; - mem0.pScratchFree = mem0.pScratchFree->pNext; - mem0.nScratchFree--; - sqlite3StatusUp(SQLITE_STATUS_SCRATCH_USED, 1); - sqlite3_mutex_leave(mem0.mutex); - }else{ - sqlite3_mutex_leave(mem0.mutex); - p = sqlite3Malloc(n); - if( sqlite3GlobalConfig.bMemstat && p ){ - sqlite3_mutex_enter(mem0.mutex); - sqlite3StatusUp(SQLITE_STATUS_SCRATCH_OVERFLOW, sqlite3MallocSize(p)); - sqlite3_mutex_leave(mem0.mutex); - } - sqlite3MemdebugSetType(p, MEMTYPE_SCRATCH); - } - assert( sqlite3_mutex_notheld(mem0.mutex) ); - - -#if SQLITE_THREADSAFE==0 && !defined(NDEBUG) - /* EVIDENCE-OF: R-12970-05880 SQLite will not use more than one scratch - ** buffers per thread. - ** - ** This can only be checked in single-threaded mode. - */ - assert( scratchAllocOut==0 ); - if( p ) scratchAllocOut++; -#endif - - return p; -} -SQLITE_PRIVATE void sqlite3ScratchFree(void *p){ - if( p ){ - -#if SQLITE_THREADSAFE==0 && !defined(NDEBUG) - /* Verify that no more than two scratch allocation per thread - ** is outstanding at one time. (This is only checked in the - ** single-threaded case since checking in the multi-threaded case - ** would be much more complicated.) */ - assert( scratchAllocOut>=1 && scratchAllocOut<=2 ); - scratchAllocOut--; -#endif - - if( SQLITE_WITHIN(p, sqlite3GlobalConfig.pScratch, mem0.pScratchEnd) ){ - /* Release memory from the SQLITE_CONFIG_SCRATCH allocation */ - ScratchFreeslot *pSlot; - pSlot = (ScratchFreeslot*)p; - sqlite3_mutex_enter(mem0.mutex); - pSlot->pNext = mem0.pScratchFree; - mem0.pScratchFree = pSlot; - mem0.nScratchFree++; - assert( mem0.nScratchFree <= (u32)sqlite3GlobalConfig.nScratch ); - sqlite3StatusDown(SQLITE_STATUS_SCRATCH_USED, 1); - sqlite3_mutex_leave(mem0.mutex); - }else{ - /* Release memory back to the heap */ - assert( sqlite3MemdebugHasType(p, MEMTYPE_SCRATCH) ); - assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_SCRATCH) ); - sqlite3MemdebugSetType(p, MEMTYPE_HEAP); - if( sqlite3GlobalConfig.bMemstat ){ - int iSize = sqlite3MallocSize(p); - sqlite3_mutex_enter(mem0.mutex); - sqlite3StatusDown(SQLITE_STATUS_SCRATCH_OVERFLOW, iSize); - sqlite3StatusDown(SQLITE_STATUS_MEMORY_USED, iSize); - sqlite3StatusDown(SQLITE_STATUS_MALLOC_COUNT, 1); - sqlite3GlobalConfig.m.xFree(p); - sqlite3_mutex_leave(mem0.mutex); - }else{ - sqlite3GlobalConfig.m.xFree(p); - } - } - } -} - -/* ** TRUE if p is a lookaside memory allocation from db */ #ifndef SQLITE_OMIT_LOOKASIDE @@ -24575,7 +26171,7 @@ SQLITE_PRIVATE int sqlite3MallocSize(void *p){ SQLITE_PRIVATE int sqlite3DbMallocSize(sqlite3 *db, void *p){ assert( p!=0 ); if( db==0 || !isLookaside(db,p) ){ -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG if( db==0 ){ assert( sqlite3MemdebugNoType(p, (u8)~MEMTYPE_HEAP) ); assert( sqlite3MemdebugHasType(p, MEMTYPE_HEAP) ); @@ -24624,11 +26220,12 @@ static SQLITE_NOINLINE void measureAllocationSize(sqlite3 *db, void *p){ /* ** Free memory that might be associated with a particular database -** connection. +** connection. Calling sqlite3DbFree(D,X) for X==0 is a harmless no-op. +** The sqlite3DbFreeNN(D,X) version requires that X be non-NULL. */ -SQLITE_PRIVATE void sqlite3DbFree(sqlite3 *db, void *p){ +SQLITE_PRIVATE void sqlite3DbFreeNN(sqlite3 *db, void *p){ assert( db==0 || sqlite3_mutex_held(db->mutex) ); - if( p==0 ) return; + assert( p!=0 ); if( db ){ if( db->pnBytesFreed ){ measureAllocationSize(db, p); @@ -24636,13 +26233,12 @@ SQLITE_PRIVATE void sqlite3DbFree(sqlite3 *db, void *p){ } if( isLookaside(db, p) ){ LookasideSlot *pBuf = (LookasideSlot*)p; -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG /* Trash all content in the buffer being freed */ memset(p, 0xaa, db->lookaside.sz); #endif pBuf->pNext = db->lookaside.pFree; db->lookaside.pFree = pBuf; - db->lookaside.nOut--; return; } } @@ -24652,6 +26248,10 @@ SQLITE_PRIVATE void sqlite3DbFree(sqlite3 *db, void *p){ sqlite3MemdebugSetType(p, MEMTYPE_HEAP); sqlite3_free(p); } +SQLITE_PRIVATE void sqlite3DbFree(sqlite3 *db, void *p){ + assert( db==0 || sqlite3_mutex_held(db->mutex) ); + if( p ) sqlite3DbFreeNN(db, p); +} /* ** Change the size of an existing memory allocation @@ -24799,16 +26399,16 @@ SQLITE_PRIVATE void *sqlite3DbMallocRawNN(sqlite3 *db, u64 n){ assert( db->mallocFailed==0 ); if( n>db->lookaside.sz ){ db->lookaside.anStat[1]++; - }else if( (pBuf = db->lookaside.pFree)==0 ){ - db->lookaside.anStat[2]++; - }else{ + }else if( (pBuf = db->lookaside.pFree)!=0 ){ db->lookaside.pFree = pBuf->pNext; - db->lookaside.nOut++; db->lookaside.anStat[0]++; - if( db->lookaside.nOut>db->lookaside.mxOut ){ - db->lookaside.mxOut = db->lookaside.nOut; - } return (void*)pBuf; + }else if( (pBuf = db->lookaside.pInit)!=0 ){ + db->lookaside.pInit = pBuf->pNext; + db->lookaside.anStat[0]++; + return (void*)pBuf; + }else{ + db->lookaside.anStat[2]++; } }else if( db->mallocFailed ){ return 0; @@ -24913,6 +26513,19 @@ SQLITE_PRIVATE char *sqlite3DbStrNDup(sqlite3 *db, const char *z, u64 n){ } /* +** The text between zStart and zEnd represents a phrase within a larger +** SQL statement. Make a copy of this phrase in space obtained form +** sqlite3DbMalloc(). Omit leading and trailing whitespace. +*/ +SQLITE_PRIVATE char *sqlite3DbSpanDup(sqlite3 *db, const char *zStart, const char *zEnd){ + int n; + while( sqlite3Isspace(zStart[0]) ) zStart++; + n = (int)(zEnd - zStart); + while( ALWAYS(n>0) && sqlite3Isspace(zStart[n-1]) ) n--; + return sqlite3DbStrNDup(db, zStart, n); +} + +/* ** Free any prior content in *pz and replace it with a copy of zNew. */ SQLITE_PRIVATE void sqlite3SetString(char **pz, sqlite3 *db, const char *zNew){ @@ -25005,7 +26618,7 @@ SQLITE_PRIVATE int sqlite3ApiExit(sqlite3* db, int rc){ ** Conversion types fall into various categories as defined by the ** following enumeration. */ -#define etRADIX 0 /* Integer types. %d, %x, %o, and so forth */ +#define etRADIX 0 /* non-decimal integer types. %x %o */ #define etFLOAT 1 /* Floating point. %f */ #define etEXP 2 /* Exponentional notation. %e and %E */ #define etGENERIC 3 /* Floating or exponential, depending on exponent. %g */ @@ -25023,8 +26636,9 @@ SQLITE_PRIVATE int sqlite3ApiExit(sqlite3* db, int rc){ #define etPOINTER 13 /* The %p conversion */ #define etSQLESCAPE3 14 /* %w -> Strings with '\"' doubled */ #define etORDINAL 15 /* %r -> 1st, 2nd, 3rd, 4th, etc. English only */ +#define etDECIMAL 16 /* %d or %u, but not %x, %o */ -#define etINVALID 16 /* Any unrecognized conversion type */ +#define etINVALID 17 /* Any unrecognized conversion type */ /* @@ -25048,8 +26662,8 @@ typedef struct et_info { /* Information about each format field */ /* ** Allowed values for et_info.flags */ -#define FLAG_SIGNED 1 /* True if the value to convert is signed */ -#define FLAG_STRING 4 /* Allow infinity precision */ +#define FLAG_SIGNED 1 /* True if the value to convert is signed */ +#define FLAG_STRING 4 /* Allow infinite precision */ /* @@ -25059,7 +26673,7 @@ typedef struct et_info { /* Information about each format field */ static const char aDigits[] = "0123456789ABCDEF0123456789abcdef"; static const char aPrefix[] = "-x0\000X0"; static const et_info fmtinfo[] = { - { 'd', 10, 1, etRADIX, 0, 0 }, + { 'd', 10, 1, etDECIMAL, 0, 0 }, { 's', 0, 4, etSTRING, 0, 0 }, { 'g', 0, 1, etGENERIC, 30, 0 }, { 'z', 0, 4, etDYNSTRING, 0, 0 }, @@ -25068,7 +26682,7 @@ static const et_info fmtinfo[] = { { 'w', 0, 4, etSQLESCAPE3, 0, 0 }, { 'c', 0, 0, etCHARX, 0, 0 }, { 'o', 8, 0, etRADIX, 0, 2 }, - { 'u', 10, 0, etRADIX, 0, 0 }, + { 'u', 10, 0, etDECIMAL, 0, 0 }, { 'x', 16, 0, etRADIX, 16, 1 }, { 'X', 16, 0, etRADIX, 0, 4 }, #ifndef SQLITE_OMIT_FLOATING_POINT @@ -25077,7 +26691,7 @@ static const et_info fmtinfo[] = { { 'E', 0, 1, etEXP, 14, 0 }, { 'G', 0, 1, etGENERIC, 14, 0 }, #endif - { 'i', 10, 1, etRADIX, 0, 0 }, + { 'i', 10, 1, etDECIMAL, 0, 0 }, { 'n', 0, 0, etSIZE, 0, 0 }, { '%', 0, 0, etPERCENT, 0, 0 }, { 'p', 16, 0, etPOINTER, 0, 1 }, @@ -25123,7 +26737,7 @@ static char et_getdigit(LONGDOUBLE_TYPE *val, int *cnt){ ** Set the StrAccum object to an error mode. */ static void setStrAccumError(StrAccum *p, u8 eError){ - assert( eError==STRACCUM_NOMEM || eError==STRACCUM_TOOBIG ); + assert( eError==SQLITE_NOMEM || eError==SQLITE_TOOBIG ); p->accError = eError; p->nAlloc = 0; } @@ -25157,8 +26771,8 @@ static char *getTextArg(PrintfArguments *p){ /* ** Render a string given by "fmt" into the StrAccum object. */ -SQLITE_PRIVATE void sqlite3VXPrintf( - StrAccum *pAccum, /* Accumulate results here */ +SQLITE_API void sqlite3_str_vappendf( + sqlite3_str *pAccum, /* Accumulate results here */ const char *fmt, /* Format string */ va_list ap /* arguments */ ){ @@ -25169,14 +26783,13 @@ SQLITE_PRIVATE void sqlite3VXPrintf( int idx; /* A general purpose loop counter */ int width; /* Width of the current field */ etByte flag_leftjustify; /* True if "-" flag is present */ - etByte flag_plussign; /* True if "+" flag is present */ - etByte flag_blanksign; /* True if " " flag is present */ + etByte flag_prefix; /* '+' or ' ' or 0 for prefix */ etByte flag_alternateform; /* True if "#" flag is present */ etByte flag_altform2; /* True if "!" flag is present */ etByte flag_zeropad; /* True if field width constant starts with zero */ - etByte flag_long; /* True if "l" flag is present */ - etByte flag_longlong; /* True if the "ll" flag is present */ + etByte flag_long; /* 1 for the "l" flag, 2 for "ll", 0 by default */ etByte done; /* Loop termination flag */ + etByte cThousand; /* Thousands separator for %d and %u */ etByte xtype = etINVALID; /* Conversion paradigm */ u8 bArgList; /* True for SQLITE_PRINTF_SQLFUNC */ char prefix; /* Prefix character. "+" or "-" or " " or '\0'. */ @@ -25196,6 +26809,11 @@ SQLITE_PRIVATE void sqlite3VXPrintf( PrintfArguments *pArgList = 0; /* Arguments for SQLITE_PRINTF_SQLFUNC */ char buf[etBUFSIZE]; /* Conversion buffer */ + /* pAccum never starts out with an empty buffer that was obtained from + ** malloc(). This precondition is required by the mprintf("%z...") + ** optimization. */ + assert( pAccum->nChar>0 || (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 ); + bufpt = 0; if( (pAccum->printfFlags & SQLITE_PRINTF_SQLFUNC)!=0 ){ pArgList = va_arg(ap, PrintfArguments*); @@ -25211,25 +26829,26 @@ SQLITE_PRIVATE void sqlite3VXPrintf( #else do{ fmt++; }while( *fmt && *fmt != '%' ); #endif - sqlite3StrAccumAppend(pAccum, bufpt, (int)(fmt - bufpt)); + sqlite3_str_append(pAccum, bufpt, (int)(fmt - bufpt)); if( *fmt==0 ) break; } if( (c=(*++fmt))==0 ){ - sqlite3StrAccumAppend(pAccum, "%", 1); + sqlite3_str_append(pAccum, "%", 1); break; } /* Find out what flags are present */ - flag_leftjustify = flag_plussign = flag_blanksign = + flag_leftjustify = flag_prefix = cThousand = flag_alternateform = flag_altform2 = flag_zeropad = 0; done = 0; do{ switch( c ){ case '-': flag_leftjustify = 1; break; - case '+': flag_plussign = 1; break; - case ' ': flag_blanksign = 1; break; + case '+': flag_prefix = '+'; break; + case ' ': flag_prefix = ' '; break; case '#': flag_alternateform = 1; break; case '!': flag_altform2 = 1; break; case '0': flag_zeropad = 1; break; + case ',': cThousand = ','; break; default: done = 1; break; } }while( !done && (c=(*++fmt))!=0 ); @@ -25299,13 +26918,11 @@ SQLITE_PRIVATE void sqlite3VXPrintf( flag_long = 1; c = *++fmt; if( c=='l' ){ - flag_longlong = 1; + flag_long = 2; c = *++fmt; - }else{ - flag_longlong = 0; } }else{ - flag_long = flag_longlong = 0; + flag_long = 0; } /* Fetch the info entry for the field */ infop = &fmtinfo[0]; @@ -25323,15 +26940,11 @@ SQLITE_PRIVATE void sqlite3VXPrintf( ** ** flag_alternateform TRUE if a '#' is present. ** flag_altform2 TRUE if a '!' is present. - ** flag_plussign TRUE if a '+' is present. + ** flag_prefix '+' or ' ' or zero ** flag_leftjustify TRUE if a '-' is present or if the ** field width was negative. ** flag_zeropad TRUE if the width began with 0. - ** flag_long TRUE if the letter 'l' (ell) prefixed - ** the conversion character. - ** flag_longlong TRUE if the letter 'll' (ell ell) prefixed - ** the conversion character. - ** flag_blanksign TRUE if a ' ' is present. + ** flag_long 1 for "l", 2 for "ll" ** width The specified field width. This is ** always non-negative. Zero is the default. ** precision The specified precision. The default @@ -25341,19 +26954,24 @@ SQLITE_PRIVATE void sqlite3VXPrintf( */ switch( xtype ){ case etPOINTER: - flag_longlong = sizeof(char*)==sizeof(i64); - flag_long = sizeof(char*)==sizeof(long int); + flag_long = sizeof(char*)==sizeof(i64) ? 2 : + sizeof(char*)==sizeof(long int) ? 1 : 0; /* Fall through into the next case */ case etORDINAL: - case etRADIX: + case etRADIX: + cThousand = 0; + /* Fall through into the next case */ + case etDECIMAL: if( infop->flags & FLAG_SIGNED ){ i64 v; if( bArgList ){ v = getIntArg(pArgList); - }else if( flag_longlong ){ - v = va_arg(ap,i64); }else if( flag_long ){ - v = va_arg(ap,long int); + if( flag_long==2 ){ + v = va_arg(ap,i64) ; + }else{ + v = va_arg(ap,long int); + } }else{ v = va_arg(ap,int); } @@ -25366,17 +26984,17 @@ SQLITE_PRIVATE void sqlite3VXPrintf( prefix = '-'; }else{ longvalue = v; - if( flag_plussign ) prefix = '+'; - else if( flag_blanksign ) prefix = ' '; - else prefix = 0; + prefix = flag_prefix; } }else{ if( bArgList ){ longvalue = (u64)getIntArg(pArgList); - }else if( flag_longlong ){ - longvalue = va_arg(ap,u64); }else if( flag_long ){ - longvalue = va_arg(ap,unsigned long int); + if( flag_long==2 ){ + longvalue = va_arg(ap,u64); + }else{ + longvalue = va_arg(ap,unsigned long int); + } }else{ longvalue = va_arg(ap,unsigned int); } @@ -25386,16 +27004,17 @@ SQLITE_PRIVATE void sqlite3VXPrintf( if( flag_zeropad && precision<width-(prefix!=0) ){ precision = width-(prefix!=0); } - if( precision<etBUFSIZE-10 ){ + if( precision<etBUFSIZE-10-etBUFSIZE/3 ){ nOut = etBUFSIZE; zOut = buf; }else{ - nOut = precision + 10; - zOut = zExtra = sqlite3Malloc( nOut ); + u64 n = (u64)precision + 10 + precision/3; + zOut = zExtra = sqlite3Malloc( n ); if( zOut==0 ){ - setStrAccumError(pAccum, STRACCUM_NOMEM); + setStrAccumError(pAccum, SQLITE_NOMEM); return; } + nOut = (int)n; } bufpt = &zOut[nOut-1]; if( xtype==etORDINAL ){ @@ -25416,8 +27035,23 @@ SQLITE_PRIVATE void sqlite3VXPrintf( }while( longvalue>0 ); } length = (int)(&zOut[nOut-1]-bufpt); - for(idx=precision-length; idx>0; idx--){ + while( precision>length ){ *(--bufpt) = '0'; /* Zero pad */ + length++; + } + if( cThousand ){ + int nn = (length - 1)/3; /* Number of "," to insert */ + int ix = (length - 1)%3 + 1; + bufpt -= nn; + for(idx=0; nn>0; idx++){ + bufpt[idx] = bufpt[idx+nn]; + ix--; + if( ix==0 ){ + bufpt[++idx] = cThousand; + nn--; + ix = 3; + } + } } if( prefix ) *(--bufpt) = prefix; /* Add sign */ if( flag_alternateform && infop->prefix ){ /* Add "0" or "0x" */ @@ -25444,9 +27078,7 @@ SQLITE_PRIVATE void sqlite3VXPrintf( realvalue = -realvalue; prefix = '-'; }else{ - if( flag_plussign ) prefix = '+'; - else if( flag_blanksign ) prefix = ' '; - else prefix = 0; + prefix = flag_prefix; } if( xtype==etGENERIC && precision>0 ) precision--; testcase( precision>0xfff ); @@ -25504,7 +27136,7 @@ SQLITE_PRIVATE void sqlite3VXPrintf( bufpt = zExtra = sqlite3Malloc( MAX(e2,0)+(i64)precision+(i64)width+15 ); if( bufpt==0 ){ - setStrAccumError(pAccum, STRACCUM_NOMEM); + setStrAccumError(pAccum, SQLITE_NOMEM); return; } } @@ -25600,22 +27232,52 @@ SQLITE_PRIVATE void sqlite3VXPrintf( case etCHARX: if( bArgList ){ bufpt = getTextArg(pArgList); - c = bufpt ? bufpt[0] : 0; + length = 1; + if( bufpt ){ + buf[0] = c = *(bufpt++); + if( (c&0xc0)==0xc0 ){ + while( length<4 && (bufpt[0]&0xc0)==0x80 ){ + buf[length++] = *(bufpt++); + } + } + }else{ + buf[0] = 0; + } }else{ - c = va_arg(ap,int); + unsigned int ch = va_arg(ap,unsigned int); + if( ch<0x00080 ){ + buf[0] = ch & 0xff; + length = 1; + }else if( ch<0x00800 ){ + buf[0] = 0xc0 + (u8)((ch>>6)&0x1f); + buf[1] = 0x80 + (u8)(ch & 0x3f); + length = 2; + }else if( ch<0x10000 ){ + buf[0] = 0xe0 + (u8)((ch>>12)&0x0f); + buf[1] = 0x80 + (u8)((ch>>6) & 0x3f); + buf[2] = 0x80 + (u8)(ch & 0x3f); + length = 3; + }else{ + buf[0] = 0xf0 + (u8)((ch>>18) & 0x07); + buf[1] = 0x80 + (u8)((ch>>12) & 0x3f); + buf[2] = 0x80 + (u8)((ch>>6) & 0x3f); + buf[3] = 0x80 + (u8)(ch & 0x3f); + length = 4; + } } if( precision>1 ){ width -= precision-1; if( width>1 && !flag_leftjustify ){ - sqlite3AppendChar(pAccum, width-1, ' '); + sqlite3_str_appendchar(pAccum, width-1, ' '); width = 0; } - sqlite3AppendChar(pAccum, precision-1, c); + while( precision-- > 1 ){ + sqlite3_str_append(pAccum, buf, length); + } } - length = 1; - buf[0] = c; bufpt = buf; - break; + flag_altform2 = 1; + goto adjust_width_for_utf8; case etSTRING: case etDYNSTRING: if( bArgList ){ @@ -25627,17 +27289,45 @@ SQLITE_PRIVATE void sqlite3VXPrintf( if( bufpt==0 ){ bufpt = ""; }else if( xtype==etDYNSTRING ){ + if( pAccum->nChar==0 && pAccum->mxAlloc && width==0 && precision<0 ){ + /* Special optimization for sqlite3_mprintf("%z..."): + ** Extend an existing memory allocation rather than creating + ** a new one. */ + assert( (pAccum->printfFlags&SQLITE_PRINTF_MALLOCED)==0 ); + pAccum->zText = bufpt; + pAccum->nAlloc = sqlite3DbMallocSize(pAccum->db, bufpt); + pAccum->nChar = 0x7fffffff & (int)strlen(bufpt); + pAccum->printfFlags |= SQLITE_PRINTF_MALLOCED; + length = 0; + break; + } zExtra = bufpt; } if( precision>=0 ){ - for(length=0; length<precision && bufpt[length]; length++){} + if( flag_altform2 ){ + /* Set length to the number of bytes needed in order to display + ** precision characters */ + unsigned char *z = (unsigned char*)bufpt; + while( precision-- > 0 && z[0] ){ + SQLITE_SKIP_UTF8(z); + } + length = (int)(z - (unsigned char*)bufpt); + }else{ + for(length=0; length<precision && bufpt[length]; length++){} + } }else{ - length = sqlite3Strlen30(bufpt); + length = 0x7fffffff & (int)strlen(bufpt); + } + adjust_width_for_utf8: + if( flag_altform2 && width>0 ){ + /* Adjust width to account for extra bytes in UTF-8 characters */ + int ii = length - 1; + while( ii>=0 ) if( (bufpt[ii--] & 0xc0)==0x80 ) width++; } break; - case etSQLESCAPE: /* Escape ' characters */ - case etSQLESCAPE2: /* Escape ' and enclose in '...' */ - case etSQLESCAPE3: { /* Escape " characters */ + case etSQLESCAPE: /* %q: Escape ' characters */ + case etSQLESCAPE2: /* %Q: Escape ' and enclose in '...' */ + case etSQLESCAPE3: { /* %w: Escape " characters */ int i, j, k, n, isnull; int needQuote; char ch; @@ -25651,16 +27341,24 @@ SQLITE_PRIVATE void sqlite3VXPrintf( } isnull = escarg==0; if( isnull ) escarg = (xtype==etSQLESCAPE2 ? "NULL" : "(NULL)"); + /* For %q, %Q, and %w, the precision is the number of byte (or + ** characters if the ! flags is present) to use from the input. + ** Because of the extra quoting characters inserted, the number + ** of output characters may be larger than the precision. + */ k = precision; for(i=n=0; k!=0 && (ch=escarg[i])!=0; i++, k--){ if( ch==q ) n++; + if( flag_altform2 && (ch&0xc0)==0xc0 ){ + while( (escarg[i+1]&0xc0)==0x80 ){ i++; } + } } needQuote = !isnull && xtype==etSQLESCAPE2; n += i + 3; if( n>etBUFSIZE ){ bufpt = zExtra = sqlite3Malloc( n ); if( bufpt==0 ){ - setStrAccumError(pAccum, STRACCUM_NOMEM); + setStrAccumError(pAccum, SQLITE_NOMEM); return; } }else{ @@ -25676,10 +27374,7 @@ SQLITE_PRIVATE void sqlite3VXPrintf( if( needQuote ) bufpt[j++] = q; bufpt[j] = 0; length = j; - /* The precision in %q and %Q means how many input characters to - ** consume, not the length of the output... - ** if( precision>=0 && precision<length ) length = precision; */ - break; + goto adjust_width_for_utf8; } case etTOKEN: { Token *pToken; @@ -25687,7 +27382,7 @@ SQLITE_PRIVATE void sqlite3VXPrintf( pToken = va_arg(ap, Token*); assert( bArgList==0 ); if( pToken && pToken->n ){ - sqlite3StrAccumAppend(pAccum, (const char*)pToken->z, pToken->n); + sqlite3_str_append(pAccum, (const char*)pToken->z, pToken->n); } length = width = 0; break; @@ -25703,10 +27398,10 @@ SQLITE_PRIVATE void sqlite3VXPrintf( assert( bArgList==0 ); assert( k>=0 && k<pSrc->nSrc ); if( pItem->zDatabase ){ - sqlite3StrAccumAppendAll(pAccum, pItem->zDatabase); - sqlite3StrAccumAppend(pAccum, ".", 1); + sqlite3_str_appendall(pAccum, pItem->zDatabase); + sqlite3_str_append(pAccum, ".", 1); } - sqlite3StrAccumAppendAll(pAccum, pItem->zName); + sqlite3_str_appendall(pAccum, pItem->zName); length = width = 0; break; } @@ -25718,15 +27413,18 @@ SQLITE_PRIVATE void sqlite3VXPrintf( /* ** The text of the conversion is pointed to by "bufpt" and is ** "length" characters long. The field width is "width". Do - ** the output. + ** the output. Both length and width are in bytes, not characters, + ** at this point. If the "!" flag was present on string conversions + ** indicating that width and precision should be expressed in characters, + ** then the values have been translated prior to reaching this point. */ width -= length; if( width>0 ){ - if( !flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' '); - sqlite3StrAccumAppend(pAccum, bufpt, length); - if( flag_leftjustify ) sqlite3AppendChar(pAccum, width, ' '); + if( !flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' '); + sqlite3_str_append(pAccum, bufpt, length); + if( flag_leftjustify ) sqlite3_str_appendchar(pAccum, width, ' '); }else{ - sqlite3StrAccumAppend(pAccum, bufpt, length); + sqlite3_str_append(pAccum, bufpt, length); } if( zExtra ){ @@ -25747,18 +27445,17 @@ static int sqlite3StrAccumEnlarge(StrAccum *p, int N){ char *zNew; assert( p->nChar+(i64)N >= p->nAlloc ); /* Only called if really needed */ if( p->accError ){ - testcase(p->accError==STRACCUM_TOOBIG); - testcase(p->accError==STRACCUM_NOMEM); + testcase(p->accError==SQLITE_TOOBIG); + testcase(p->accError==SQLITE_NOMEM); return 0; } if( p->mxAlloc==0 ){ N = p->nAlloc - p->nChar - 1; - setStrAccumError(p, STRACCUM_TOOBIG); + setStrAccumError(p, SQLITE_TOOBIG); return N; }else{ char *zOld = isMalloced(p) ? p->zText : 0; i64 szNew = p->nChar; - assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) ); szNew += N + 1; if( szNew+p->nChar<=p->mxAlloc ){ /* Force exponential buffer size growth as long as it does not overflow, @@ -25766,8 +27463,8 @@ static int sqlite3StrAccumEnlarge(StrAccum *p, int N){ szNew += p->nChar; } if( szNew > p->mxAlloc ){ - sqlite3StrAccumReset(p); - setStrAccumError(p, STRACCUM_TOOBIG); + sqlite3_str_reset(p); + setStrAccumError(p, SQLITE_TOOBIG); return 0; }else{ p->nAlloc = (int)szNew; @@ -25784,8 +27481,8 @@ static int sqlite3StrAccumEnlarge(StrAccum *p, int N){ p->nAlloc = sqlite3DbMallocSize(p->db, zNew); p->printfFlags |= SQLITE_PRINTF_MALLOCED; }else{ - sqlite3StrAccumReset(p); - setStrAccumError(p, STRACCUM_NOMEM); + sqlite3_str_reset(p); + setStrAccumError(p, SQLITE_NOMEM); return 0; } } @@ -25795,12 +27492,11 @@ static int sqlite3StrAccumEnlarge(StrAccum *p, int N){ /* ** Append N copies of character c to the given string buffer. */ -SQLITE_PRIVATE void sqlite3AppendChar(StrAccum *p, int N, char c){ +SQLITE_API void sqlite3_str_appendchar(sqlite3_str *p, int N, char c){ testcase( p->nChar + (i64)N > 0x7fffffff ); if( p->nChar+(i64)N >= p->nAlloc && (N = sqlite3StrAccumEnlarge(p, N))<=0 ){ return; } - assert( (p->zText==p->zBase)==!isMalloced(p) ); while( (N--)>0 ) p->zText[p->nChar++] = c; } @@ -25808,9 +27504,9 @@ SQLITE_PRIVATE void sqlite3AppendChar(StrAccum *p, int N, char c){ ** The StrAccum "p" is not large enough to accept N new bytes of z[]. ** So enlarge if first, then do the append. ** -** This is a helper routine to sqlite3StrAccumAppend() that does special-case +** This is a helper routine to sqlite3_str_append() that does special-case ** work (enlarging the buffer) using tail recursion, so that the -** sqlite3StrAccumAppend() routine can use fast calling semantics. +** sqlite3_str_append() routine can use fast calling semantics. */ static void SQLITE_NOINLINE enlargeAndAppend(StrAccum *p, const char *z, int N){ N = sqlite3StrAccumEnlarge(p, N); @@ -25818,14 +27514,13 @@ static void SQLITE_NOINLINE enlargeAndAppend(StrAccum *p, const char *z, int N){ memcpy(&p->zText[p->nChar], z, N); p->nChar += N; } - assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) ); } /* ** Append N bytes of text from z to the StrAccum object. Increase the ** size of the memory allocation for StrAccum if necessary. */ -SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){ +SQLITE_API void sqlite3_str_append(sqlite3_str *p, const char *z, int N){ assert( z!=0 || N==0 ); assert( p->zText!=0 || p->nChar==0 || p->accError ); assert( N>=0 ); @@ -25842,8 +27537,8 @@ SQLITE_PRIVATE void sqlite3StrAccumAppend(StrAccum *p, const char *z, int N){ /* ** Append the complete text of zero-terminated string z[] to the p string. */ -SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum *p, const char *z){ - sqlite3StrAccumAppend(p, z, sqlite3Strlen30(z)); +SQLITE_API void sqlite3_str_appendall(sqlite3_str *p, const char *z){ + sqlite3_str_append(p, z, sqlite3Strlen30(z)); } @@ -25853,19 +27548,20 @@ SQLITE_PRIVATE void sqlite3StrAccumAppendAll(StrAccum *p, const char *z){ ** pointer if any kind of error was encountered. */ static SQLITE_NOINLINE char *strAccumFinishRealloc(StrAccum *p){ + char *zText; assert( p->mxAlloc>0 && !isMalloced(p) ); - p->zText = sqlite3DbMallocRaw(p->db, p->nChar+1 ); - if( p->zText ){ - memcpy(p->zText, p->zBase, p->nChar+1); + zText = sqlite3DbMallocRaw(p->db, p->nChar+1 ); + if( zText ){ + memcpy(zText, p->zText, p->nChar+1); p->printfFlags |= SQLITE_PRINTF_MALLOCED; }else{ - setStrAccumError(p, STRACCUM_NOMEM); + setStrAccumError(p, SQLITE_NOMEM); } - return p->zText; + p->zText = zText; + return zText; } SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum *p){ if( p->zText ){ - assert( (p->zText==p->zBase)==!isMalloced(p) ); p->zText[p->nChar] = 0; if( p->mxAlloc>0 && !isMalloced(p) ){ return strAccumFinishRealloc(p); @@ -25875,14 +27571,55 @@ SQLITE_PRIVATE char *sqlite3StrAccumFinish(StrAccum *p){ } /* +** This singleton is an sqlite3_str object that is returned if +** sqlite3_malloc() fails to provide space for a real one. This +** sqlite3_str object accepts no new text and always returns +** an SQLITE_NOMEM error. +*/ +static sqlite3_str sqlite3OomStr = { + 0, 0, 0, 0, 0, SQLITE_NOMEM, 0 +}; + +/* Finalize a string created using sqlite3_str_new(). +*/ +SQLITE_API char *sqlite3_str_finish(sqlite3_str *p){ + char *z; + if( p!=0 && p!=&sqlite3OomStr ){ + z = sqlite3StrAccumFinish(p); + sqlite3_free(p); + }else{ + z = 0; + } + return z; +} + +/* Return any error code associated with p */ +SQLITE_API int sqlite3_str_errcode(sqlite3_str *p){ + return p ? p->accError : SQLITE_NOMEM; +} + +/* Return the current length of p in bytes */ +SQLITE_API int sqlite3_str_length(sqlite3_str *p){ + return p ? p->nChar : 0; +} + +/* Return the current value for p */ +SQLITE_API char *sqlite3_str_value(sqlite3_str *p){ + if( p==0 || p->nChar==0 ) return 0; + p->zText[p->nChar] = 0; + return p->zText; +} + +/* ** Reset an StrAccum string. Reclaim all malloced memory. */ -SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum *p){ - assert( (p->zText==0 || p->zText==p->zBase)==!isMalloced(p) ); +SQLITE_API void sqlite3_str_reset(StrAccum *p){ if( isMalloced(p) ){ sqlite3DbFree(p->db, p->zText); p->printfFlags &= ~SQLITE_PRINTF_MALLOCED; } + p->nAlloc = 0; + p->nChar = 0; p->zText = 0; } @@ -25901,15 +27638,27 @@ SQLITE_PRIVATE void sqlite3StrAccumReset(StrAccum *p){ ** allocations will ever occur. */ SQLITE_PRIVATE void sqlite3StrAccumInit(StrAccum *p, sqlite3 *db, char *zBase, int n, int mx){ - p->zText = p->zBase = zBase; + p->zText = zBase; p->db = db; - p->nChar = 0; p->nAlloc = n; p->mxAlloc = mx; + p->nChar = 0; p->accError = 0; p->printfFlags = 0; } +/* Allocate and initialize a new dynamic string object */ +SQLITE_API sqlite3_str *sqlite3_str_new(sqlite3 *db){ + sqlite3_str *p = sqlite3_malloc64(sizeof(*p)); + if( p ){ + sqlite3StrAccumInit(p, 0, 0, 0, + db ? db->aLimit[SQLITE_LIMIT_LENGTH] : SQLITE_MAX_LENGTH); + }else{ + p = &sqlite3OomStr; + } + return p; +} + /* ** Print into memory obtained from sqliteMalloc(). Use the internal ** %-conversion extensions. @@ -25922,9 +27671,9 @@ SQLITE_PRIVATE char *sqlite3VMPrintf(sqlite3 *db, const char *zFormat, va_list a sqlite3StrAccumInit(&acc, db, zBase, sizeof(zBase), db->aLimit[SQLITE_LIMIT_LENGTH]); acc.printfFlags = SQLITE_PRINTF_INTERNAL; - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); z = sqlite3StrAccumFinish(&acc); - if( acc.accError==STRACCUM_NOMEM ){ + if( acc.accError==SQLITE_NOMEM ){ sqlite3OomFault(db); } return z; @@ -25962,7 +27711,7 @@ SQLITE_API char *sqlite3_vmprintf(const char *zFormat, va_list ap){ if( sqlite3_initialize() ) return 0; #endif sqlite3StrAccumInit(&acc, 0, zBase, sizeof(zBase), SQLITE_MAX_LENGTH); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); z = sqlite3StrAccumFinish(&acc); return z; } @@ -26007,7 +27756,7 @@ SQLITE_API char *sqlite3_vsnprintf(int n, char *zBuf, const char *zFormat, va_li } #endif sqlite3StrAccumInit(&acc, 0, zBuf, n, 0); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); zBuf[acc.nChar] = 0; return zBuf; } @@ -26029,7 +27778,7 @@ SQLITE_API char *sqlite3_snprintf(int n, char *zBuf, const char *zFormat, ...){ ** allocate memory because it might be called while the memory allocator ** mutex is held. ** -** sqlite3VXPrintf() might ask for *temporary* memory allocations for +** sqlite3_str_vappendf() might ask for *temporary* memory allocations for ** certain format characters (%q) or for very large precisions or widths. ** Care must be taken that any sqlite3_log() calls that occur while the ** memory mutex is held do not use these mechanisms. @@ -26039,7 +27788,7 @@ static void renderLogMsg(int iErrCode, const char *zFormat, va_list ap){ char zMsg[SQLITE_PRINT_BUF_SIZE*3]; /* Complete log message */ sqlite3StrAccumInit(&acc, 0, zMsg, sizeof(zMsg), 0); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); sqlite3GlobalConfig.xLog(sqlite3GlobalConfig.pLogArg, iErrCode, sqlite3StrAccumFinish(&acc)); } @@ -26068,23 +27817,30 @@ SQLITE_PRIVATE void sqlite3DebugPrintf(const char *zFormat, ...){ char zBuf[500]; sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); va_start(ap,zFormat); - sqlite3VXPrintf(&acc, zFormat, ap); + sqlite3_str_vappendf(&acc, zFormat, ap); va_end(ap); sqlite3StrAccumFinish(&acc); +#ifdef SQLITE_OS_TRACE_PROC + { + extern void SQLITE_OS_TRACE_PROC(const char *zBuf, int nBuf); + SQLITE_OS_TRACE_PROC(zBuf, sizeof(zBuf)); + } +#else fprintf(stdout,"%s", zBuf); fflush(stdout); +#endif } #endif /* -** variable-argument wrapper around sqlite3VXPrintf(). The bFlags argument +** variable-argument wrapper around sqlite3_str_vappendf(). The bFlags argument ** can contain the bit SQLITE_PRINTF_INTERNAL enable internal formats. */ -SQLITE_PRIVATE void sqlite3XPrintf(StrAccum *p, const char *zFormat, ...){ +SQLITE_API void sqlite3_str_appendf(StrAccum *p, const char *zFormat, ...){ va_list ap; va_start(ap,zFormat); - sqlite3VXPrintf(p, zFormat, ap); + sqlite3_str_vappendf(p, zFormat, ap); va_end(ap); } @@ -26150,15 +27906,17 @@ static void sqlite3TreeViewLine(TreeView *p, const char *zFormat, ...){ sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); if( p ){ for(i=0; i<p->iLevel && i<sizeof(p->bLine)-1; i++){ - sqlite3StrAccumAppend(&acc, p->bLine[i] ? "| " : " ", 4); + sqlite3_str_append(&acc, p->bLine[i] ? "| " : " ", 4); } - sqlite3StrAccumAppend(&acc, p->bLine[i] ? "|-- " : "'-- ", 4); + sqlite3_str_append(&acc, p->bLine[i] ? "|-- " : "'-- ", 4); + } + if( zFormat!=0 ){ + va_start(ap, zFormat); + sqlite3_str_vappendf(&acc, zFormat, ap); + va_end(ap); + assert( acc.nChar>0 ); + sqlite3_str_append(&acc, "\n", 1); } - va_start(ap, zFormat); - sqlite3VXPrintf(&acc, zFormat, ap); - va_end(ap); - assert( acc.nChar>0 ); - if( zBuf[acc.nChar-1]!='\n' ) sqlite3StrAccumAppend(&acc, "\n", 1); sqlite3StrAccumFinish(&acc); fprintf(stdout,"%s", zBuf); fflush(stdout); @@ -26191,17 +27949,17 @@ SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView *pView, const With *pWith, u8 m char zLine[1000]; const struct Cte *pCte = &pWith->a[i]; sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0); - sqlite3XPrintf(&x, "%s", pCte->zName); + sqlite3_str_appendf(&x, "%s", pCte->zName); if( pCte->pCols && pCte->pCols->nExpr>0 ){ char cSep = '('; int j; for(j=0; j<pCte->pCols->nExpr; j++){ - sqlite3XPrintf(&x, "%c%s", cSep, pCte->pCols->a[j].zName); + sqlite3_str_appendf(&x, "%c%s", cSep, pCte->pCols->a[j].zName); cSep = ','; } - sqlite3XPrintf(&x, ")"); + sqlite3_str_appendf(&x, ")"); } - sqlite3XPrintf(&x, " AS"); + sqlite3_str_appendf(&x, " AS"); sqlite3StrAccumFinish(&x); sqlite3TreeViewItem(pView, zLine, i<pWith->nCte-1); sqlite3TreeViewSelect(pView, pCte->pSelect, 0); @@ -26218,6 +27976,10 @@ SQLITE_PRIVATE void sqlite3TreeViewWith(TreeView *pView, const With *pWith, u8 m SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 moreToFollow){ int n = 0; int cnt = 0; + if( p==0 ){ + sqlite3TreeViewLine(pView, "nil-SELECT"); + return; + } pView = sqlite3TreeViewPush(pView, moreToFollow); if( p->pWith ){ sqlite3TreeViewWith(pView, p->pWith, 1); @@ -26225,11 +27987,21 @@ SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 m sqlite3TreeViewPush(pView, 1); } do{ +#if SELECTTRACE_ENABLED + sqlite3TreeViewLine(pView, + "SELECT%s%s (%s/%p) selFlags=0x%x nSelectRow=%d", + ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""), + ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), + p->zSelName, p, p->selFlags, + (int)p->nSelectRow + ); +#else sqlite3TreeViewLine(pView, "SELECT%s%s (0x%p) selFlags=0x%x nSelectRow=%d", ((p->selFlags & SF_Distinct) ? " DISTINCT" : ""), ((p->selFlags & SF_Aggregate) ? " agg_flag" : ""), p, p->selFlags, (int)p->nSelectRow ); +#endif if( cnt++ ) sqlite3TreeViewPop(pView); if( p->pPrior ){ n = 1000; @@ -26241,7 +28013,6 @@ SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 m if( p->pHaving ) n++; if( p->pOrderBy ) n++; if( p->pLimit ) n++; - if( p->pOffset ) n++; } sqlite3TreeViewExprList(pView, p->pEList, (n--)>0, "result-set"); if( p->pSrc && p->pSrc->nSrc ){ @@ -26253,20 +28024,20 @@ SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 m StrAccum x; char zLine[100]; sqlite3StrAccumInit(&x, 0, zLine, sizeof(zLine), 0); - sqlite3XPrintf(&x, "{%d,*}", pItem->iCursor); + sqlite3_str_appendf(&x, "{%d,*}", pItem->iCursor); if( pItem->zDatabase ){ - sqlite3XPrintf(&x, " %s.%s", pItem->zDatabase, pItem->zName); + sqlite3_str_appendf(&x, " %s.%s", pItem->zDatabase, pItem->zName); }else if( pItem->zName ){ - sqlite3XPrintf(&x, " %s", pItem->zName); + sqlite3_str_appendf(&x, " %s", pItem->zName); } if( pItem->pTab ){ - sqlite3XPrintf(&x, " tabname=%Q", pItem->pTab->zName); + sqlite3_str_appendf(&x, " tabname=%Q", pItem->pTab->zName); } if( pItem->zAlias ){ - sqlite3XPrintf(&x, " (AS %s)", pItem->zAlias); + sqlite3_str_appendf(&x, " (AS %s)", pItem->zAlias); } if( pItem->fg.jointype & JT_LEFT ){ - sqlite3XPrintf(&x, " LEFT-JOIN"); + sqlite3_str_appendf(&x, " LEFT-JOIN"); } sqlite3StrAccumFinish(&x); sqlite3TreeViewItem(pView, zLine, i<p->pSrc->nSrc-1); @@ -26298,12 +28069,12 @@ SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 m } if( p->pLimit ){ sqlite3TreeViewItem(pView, "LIMIT", (n--)>0); - sqlite3TreeViewExpr(pView, p->pLimit, 0); - sqlite3TreeViewPop(pView); - } - if( p->pOffset ){ - sqlite3TreeViewItem(pView, "OFFSET", (n--)>0); - sqlite3TreeViewExpr(pView, p->pOffset, 0); + sqlite3TreeViewExpr(pView, p->pLimit->pLeft, p->pLimit->pRight!=0); + if( p->pLimit->pRight ){ + sqlite3TreeViewItem(pView, "OFFSET", (n--)>0); + sqlite3TreeViewExpr(pView, p->pLimit->pRight, 0); + sqlite3TreeViewPop(pView); + } sqlite3TreeViewPop(pView); } if( p->pPrior ){ @@ -26326,7 +28097,7 @@ SQLITE_PRIVATE void sqlite3TreeViewSelect(TreeView *pView, const Select *p, u8 m SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 moreToFollow){ const char *zBinOp = 0; /* Binary operator */ const char *zUniOp = 0; /* Unary operator */ - char zFlgs[30]; + char zFlgs[60]; pView = sqlite3TreeViewPush(pView, moreToFollow); if( pExpr==0 ){ sqlite3TreeViewLine(pView, "nil"); @@ -26334,7 +28105,12 @@ SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 m return; } if( pExpr->flags ){ - sqlite3_snprintf(sizeof(zFlgs),zFlgs," flags=0x%x",pExpr->flags); + if( ExprHasProperty(pExpr, EP_FromJoin) ){ + sqlite3_snprintf(sizeof(zFlgs),zFlgs," flags=0x%x iRJT=%d", + pExpr->flags, pExpr->iRightJoinTable); + }else{ + sqlite3_snprintf(sizeof(zFlgs),zFlgs," flags=0x%x",pExpr->flags); + } }else{ zFlgs[0] = 0; } @@ -26376,6 +28152,11 @@ SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 m sqlite3TreeViewLine(pView,"NULL"); break; } + case TK_TRUEFALSE: { + sqlite3TreeViewLine(pView, + sqlite3ExprTruthValue(pExpr) ? "TRUE" : "FALSE"); + break; + } #ifndef SQLITE_OMIT_BLOB_LITERAL case TK_BLOB: { sqlite3TreeViewLine(pView,"%s", pExpr->u.zToken); @@ -26432,6 +28213,19 @@ SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 m case TK_ISNULL: zUniOp = "ISNULL"; break; case TK_NOTNULL: zUniOp = "NOTNULL"; break; + case TK_TRUTH: { + int x; + const char *azOp[] = { + "IS-FALSE", "IS-TRUE", "IS-NOT-FALSE", "IS-NOT-TRUE" + }; + assert( pExpr->op2==TK_IS || pExpr->op2==TK_ISNOT ); + assert( pExpr->pRight ); + assert( pExpr->pRight->op==TK_TRUEFALSE ); + x = (pExpr->op2==TK_ISNOT)*2 + sqlite3ExprTruthValue(pExpr->pRight); + zUniOp = azOp[x]; + break; + } + case TK_SPAN: { sqlite3TreeViewLine(pView, "SPAN %Q", pExpr->u.zToken); sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); @@ -26465,17 +28259,17 @@ SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 m } #ifndef SQLITE_OMIT_SUBQUERY case TK_EXISTS: { - sqlite3TreeViewLine(pView, "EXISTS-expr"); + sqlite3TreeViewLine(pView, "EXISTS-expr flags=0x%x", pExpr->flags); sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); break; } case TK_SELECT: { - sqlite3TreeViewLine(pView, "SELECT-expr"); + sqlite3TreeViewLine(pView, "SELECT-expr flags=0x%x", pExpr->flags); sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); break; } case TK_IN: { - sqlite3TreeViewLine(pView, "IN"); + sqlite3TreeViewLine(pView, "IN flags=0x%x", pExpr->flags); sqlite3TreeViewExpr(pView, pExpr->pLeft, 1); if( ExprHasProperty(pExpr, EP_xIsSelect) ){ sqlite3TreeViewSelect(pView, pExpr->x.pSelect, 0); @@ -26553,6 +28347,11 @@ SQLITE_PRIVATE void sqlite3TreeViewExpr(TreeView *pView, const Expr *pExpr, u8 m sqlite3TreeViewSelect(pView, pExpr->pLeft->x.pSelect, 0); break; } + case TK_IF_NULL_ROW: { + sqlite3TreeViewLine(pView, "IF-NULL-ROW %d", pExpr->iTable); + sqlite3TreeViewExpr(pView, pExpr->pLeft, 0); + break; + } default: { sqlite3TreeViewLine(pView, "op=%d", pExpr->op); break; @@ -26586,12 +28385,25 @@ SQLITE_PRIVATE void sqlite3TreeViewBareExprList( sqlite3TreeViewLine(pView, "%s", zLabel); for(i=0; i<pList->nExpr; i++){ int j = pList->a[i].u.x.iOrderByCol; - if( j ){ - sqlite3TreeViewPush(pView, 0); - sqlite3TreeViewLine(pView, "iOrderByCol=%d", j); + char *zName = pList->a[i].zName; + int moreToFollow = i<pList->nExpr - 1; + if( j || zName ){ + sqlite3TreeViewPush(pView, moreToFollow); + moreToFollow = 0; + sqlite3TreeViewLine(pView, 0); + if( zName ){ + fprintf(stdout, "AS %s ", zName); + } + if( j ){ + fprintf(stdout, "iOrderByCol=%d", j); + } + fprintf(stdout, "\n"); + fflush(stdout); + } + sqlite3TreeViewExpr(pView, pList->a[i].pExpr, moreToFollow); + if( j || zName ){ + sqlite3TreeViewPop(pView); } - sqlite3TreeViewExpr(pView, pList->a[i].pExpr, i<pList->nExpr-1); - if( j ) sqlite3TreeViewPop(pView); } } } @@ -27358,7 +29170,9 @@ translate_out: #endif return SQLITE_OK; } +#endif /* SQLITE_OMIT_UTF16 */ +#ifndef SQLITE_OMIT_UTF16 /* ** This routine checks for a byte-order mark at the beginning of the ** UTF-16 string stored in *pMem. If one is present, it is removed and @@ -27880,6 +29694,45 @@ SQLITE_API int sqlite3_strnicmp(const char *zLeft, const char *zRight, int N){ } /* +** Compute 10 to the E-th power. Examples: E==1 results in 10. +** E==2 results in 100. E==50 results in 1.0e50. +** +** This routine only works for values of E between 1 and 341. +*/ +static LONGDOUBLE_TYPE sqlite3Pow10(int E){ +#if defined(_MSC_VER) + static const LONGDOUBLE_TYPE x[] = { + 1.0e+001, + 1.0e+002, + 1.0e+004, + 1.0e+008, + 1.0e+016, + 1.0e+032, + 1.0e+064, + 1.0e+128, + 1.0e+256 + }; + LONGDOUBLE_TYPE r = 1.0; + int i; + assert( E>=0 && E<=307 ); + for(i=0; E!=0; i++, E >>=1){ + if( E & 1 ) r *= x[i]; + } + return r; +#else + LONGDOUBLE_TYPE x = 10.0; + LONGDOUBLE_TYPE r = 1.0; + while(1){ + if( E & 1 ) r *= x; + E >>= 1; + if( E==0 ) break; + x *= x; + } + return r; +#endif +} + +/* ** The string z[] is an text representation of a real number. ** Convert this string to a double and write it into *pResult. ** @@ -27946,12 +29799,12 @@ SQLITE_PRIVATE int sqlite3AtoF(const char *z, double *pResult, int length, u8 en /* copy max significant digits to significand */ while( z<zEnd && sqlite3Isdigit(*z) && s<((LARGEST_INT64-9)/10) ){ s = s*10 + (*z - '0'); - z+=incr, nDigits++; + z+=incr; nDigits++; } /* skip non-significant significand digits ** (increase exponent by d to shift decimal left) */ - while( z<zEnd && sqlite3Isdigit(*z) ) z+=incr, nDigits++, d++; + while( z<zEnd && sqlite3Isdigit(*z) ){ z+=incr; nDigits++; d++; } if( z>=zEnd ) goto do_atof_calc; /* if decimal point is present */ @@ -27964,7 +29817,7 @@ SQLITE_PRIVATE int sqlite3AtoF(const char *z, double *pResult, int length, u8 en s = s*10 + (*z - '0'); d--; } - z+=incr, nDigits++; + z+=incr; nDigits++; } } if( z>=zEnd ) goto do_atof_calc; @@ -28034,11 +29887,10 @@ do_atof_calc: if( e==0 ){ /*OPTIMIZATION-IF-TRUE*/ result = (double)s; }else{ - LONGDOUBLE_TYPE scale = 1.0; /* attempt to handle extremely small/large numbers better */ if( e>307 ){ /*OPTIMIZATION-IF-TRUE*/ if( e<342 ){ /*OPTIMIZATION-IF-TRUE*/ - while( e%308 ) { scale *= 1.0e+1; e -= 1; } + LONGDOUBLE_TYPE scale = sqlite3Pow10(e-308); if( esign<0 ){ result = s / scale; result /= 1.0e+308; @@ -28050,14 +29902,15 @@ do_atof_calc: if( esign<0 ){ result = 0.0*s; }else{ +#ifdef INFINITY + result = INFINITY*s; +#else result = 1e308*1e308*s; /* Infinity */ +#endif } } }else{ - /* 1.0e+22 is the largest power of 10 than can be - ** represented exactly. */ - while( e%22 ) { scale *= 1.0e+1; e -= 1; } - while( e>0 ) { scale *= 1.0e+22; e -= 22; } + LONGDOUBLE_TYPE scale = sqlite3Pow10(e); if( esign<0 ){ result = s / scale; }else{ @@ -28112,16 +29965,12 @@ static int compare2pow63(const char *zNum, int incr){ ** Convert zNum to a 64-bit signed integer. zNum must be decimal. This ** routine does *not* accept hexadecimal notation. ** -** If the zNum value is representable as a 64-bit twos-complement -** integer, then write that value into *pNum and return 0. -** -** If zNum is exactly 9223372036854775808, return 2. This special -** case is broken out because while 9223372036854775808 cannot be a -** signed 64-bit integer, its negative -9223372036854775808 can be. +** Returns: ** -** If zNum is too big for a 64-bit integer and is not -** 9223372036854775808 or if zNum contains any non-numeric text, -** then return 1. +** 0 Successful transformation. Fits in a 64-bit signed integer. +** 1 Excess non-space text after the integer value +** 2 Integer too large for a 64-bit signed integer or is malformed +** 3 Special case of 9223372036854775808 ** ** length is the number of bytes in the string (bytes, not characters). ** The string is not necessarily zero-terminated. The encoding is @@ -28134,6 +29983,7 @@ SQLITE_PRIVATE int sqlite3Atoi64(const char *zNum, i64 *pNum, int length, u8 enc int i; int c = 0; int nonNum = 0; /* True if input contains UTF16 with high byte non-zero */ + int rc; /* Baseline return code */ const char *zStart; const char *zEnd = zNum + length; assert( enc==SQLITE_UTF8 || enc==SQLITE_UTF16LE || enc==SQLITE_UTF16BE ); @@ -28161,43 +30011,57 @@ SQLITE_PRIVATE int sqlite3Atoi64(const char *zNum, i64 *pNum, int length, u8 enc for(i=0; &zNum[i]<zEnd && (c=zNum[i])>='0' && c<='9'; i+=incr){ u = u*10 + c - '0'; } + testcase( i==18*incr ); + testcase( i==19*incr ); + testcase( i==20*incr ); if( u>LARGEST_INT64 ){ + /* This test and assignment is needed only to suppress UB warnings + ** from clang and -fsanitize=undefined. This test and assignment make + ** the code a little larger and slower, and no harm comes from omitting + ** them, but we must appaise the undefined-behavior pharisees. */ *pNum = neg ? SMALLEST_INT64 : LARGEST_INT64; }else if( neg ){ *pNum = -(i64)u; }else{ *pNum = (i64)u; } - testcase( i==18 ); - testcase( i==19 ); - testcase( i==20 ); - if( &zNum[i]<zEnd /* Extra bytes at the end */ - || (i==0 && zStart==zNum) /* No digits */ - || i>19*incr /* Too many digits */ + rc = 0; + if( (i==0 && zStart==zNum) /* No digits */ || nonNum /* UTF16 with high-order bytes non-zero */ ){ - /* zNum is empty or contains non-numeric text or is longer - ** than 19 digits (thus guaranteeing that it is too large) */ - return 1; - }else if( i<19*incr ){ + rc = 1; + }else if( &zNum[i]<zEnd ){ /* Extra bytes at the end */ + int jj = i; + do{ + if( !sqlite3Isspace(zNum[jj]) ){ + rc = 1; /* Extra non-space text after the integer */ + break; + } + jj += incr; + }while( &zNum[jj]<zEnd ); + } + if( i<19*incr ){ /* Less than 19 digits, so we know that it fits in 64 bits */ assert( u<=LARGEST_INT64 ); - return 0; + return rc; }else{ /* zNum is a 19-digit numbers. Compare it against 9223372036854775808. */ - c = compare2pow63(zNum, incr); + c = i>19*incr ? 1 : compare2pow63(zNum, incr); if( c<0 ){ /* zNum is less than 9223372036854775808 so it fits */ assert( u<=LARGEST_INT64 ); - return 0; - }else if( c>0 ){ - /* zNum is greater than 9223372036854775808 so it overflows */ - return 1; + return rc; }else{ - /* zNum is exactly 9223372036854775808. Fits if negative. The - ** special case 2 overflow if positive */ - assert( u-1==LARGEST_INT64 ); - return neg ? 0 : 2; + *pNum = neg ? SMALLEST_INT64 : LARGEST_INT64; + if( c>0 ){ + /* zNum is greater than 9223372036854775808 so it overflows */ + return 2; + }else{ + /* zNum is exactly 9223372036854775808. Fits if negative. The + ** special case 2 overflow if positive */ + assert( u-1==LARGEST_INT64 ); + return neg ? rc : 3; + } } } } @@ -28210,8 +30074,9 @@ SQLITE_PRIVATE int sqlite3Atoi64(const char *zNum, i64 *pNum, int length, u8 enc ** Returns: ** ** 0 Successful transformation. Fits in a 64-bit signed integer. -** 1 Integer too large for a 64-bit signed integer or is malformed -** 2 Special case of 9223372036854775808 +** 1 Excess text after the integer value +** 2 Integer too large for a 64-bit signed integer or is malformed +** 3 Special case of 9223372036854775808 */ SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char *z, i64 *pOut){ #ifndef SQLITE_OMIT_HEX_INTEGER @@ -28225,7 +30090,7 @@ SQLITE_PRIVATE int sqlite3DecOrHexToI64(const char *z, i64 *pOut){ u = u*16 + sqlite3HexToInt(z[k]); } memcpy(pOut, &u, 8); - return (z[k]==0 && k-i<=16) ? 0 : 1; + return (z[k]==0 && k-i<=16) ? 0 : 2; }else #endif /* SQLITE_OMIT_HEX_INTEGER */ { @@ -28272,6 +30137,7 @@ SQLITE_PRIVATE int sqlite3GetInt32(const char *zNum, int *pValue){ } } #endif + if( !sqlite3Isdigit(zNum[0]) ) return 0; while( zNum[0]=='0' ) zNum++; for(i=0; i<11 && (c = zNum[i] - '0')>=0 && c<=9; i++){ v = v*10 + c; @@ -28699,7 +30565,7 @@ SQLITE_PRIVATE u32 sqlite3Get4byte(const u8 *p){ u32 x; memcpy(&x,p,4); return x; -#elif SQLITE_BYTEORDER==1234 && (GCC_VERSION>=4003000 || CLANG_VERSION>=3000000) +#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000 u32 x; memcpy(&x,p,4); return __builtin_bswap32(x); @@ -28715,7 +30581,7 @@ SQLITE_PRIVATE u32 sqlite3Get4byte(const u8 *p){ SQLITE_PRIVATE void sqlite3Put4byte(unsigned char *p, u32 v){ #if SQLITE_BYTEORDER==4321 memcpy(p,&v,4); -#elif SQLITE_BYTEORDER==1234 && (GCC_VERSION>=4003000 || CLANG_VERSION>=3000000) +#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000 u32 x = __builtin_bswap32(v); memcpy(p,&x,4); #elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300 @@ -28834,7 +30700,7 @@ SQLITE_PRIVATE int sqlite3SafetyCheckSickOrOk(sqlite3 *db){ ** overflow, leave *pA unchanged and return 1. */ SQLITE_PRIVATE int sqlite3AddInt64(i64 *pA, i64 iB){ -#if GCC_VERSION>=5004000 || CLANG_VERSION>=4000000 +#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER) return __builtin_add_overflow(*pA, iB, pA); #else i64 iA = *pA; @@ -28854,7 +30720,7 @@ SQLITE_PRIVATE int sqlite3AddInt64(i64 *pA, i64 iB){ #endif } SQLITE_PRIVATE int sqlite3SubInt64(i64 *pA, i64 iB){ -#if GCC_VERSION>=5004000 || CLANG_VERSION>=4000000 +#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER) return __builtin_sub_overflow(*pA, iB, pA); #else testcase( iB==SMALLEST_INT64+1 ); @@ -28869,7 +30735,7 @@ SQLITE_PRIVATE int sqlite3SubInt64(i64 *pA, i64 iB){ #endif } SQLITE_PRIVATE int sqlite3MulInt64(i64 *pA, i64 iB){ -#if GCC_VERSION>=5004000 || CLANG_VERSION>=4000000 +#if GCC_VERSION>=5004000 && !defined(__INTEL_COMPILER) return __builtin_mul_overflow(*pA, iB, pA); #else i64 iA = *pA; @@ -28971,8 +30837,14 @@ SQLITE_PRIVATE LogEst sqlite3LogEst(u64 x){ if( x<2 ) return 0; while( x<8 ){ y -= 10; x <<= 1; } }else{ +#if GCC_VERSION>=5004000 + int i = 60 - __builtin_clzll(x); + y += i*10; + x >>= i; +#else while( x>255 ){ y += 40; x >>= 4; } /*OPTIMIZATION-IF-TRUE*/ while( x>15 ){ y += 10; x >>= 1; } +#endif } return a[x&7] + y - 10; } @@ -29268,8 +31140,9 @@ static int rehash(Hash *pH, unsigned int new_size){ } /* This function (for internal use only) locates an element in an -** hash table that matches the given key. The hash for this key is -** also computed and returned in the *pH parameter. +** hash table that matches the given key. If no element is found, +** a pointer to a static null element with HashElem.data==0 is returned. +** If pH is not NULL, then the hash for this key is written to *pH. */ static HashElem *findElementWithHash( const Hash *pH, /* The pH to be searched */ @@ -29279,6 +31152,7 @@ static HashElem *findElementWithHash( HashElem *elem; /* Used to loop thru the element list */ int count; /* Number of elements left to test */ unsigned int h; /* The computed hash */ + static HashElem nullElement = { 0, 0, 0, 0 }; if( pH->ht ){ /*OPTIMIZATION-IF-TRUE*/ struct _ht *pEntry; @@ -29291,7 +31165,7 @@ static HashElem *findElementWithHash( elem = pH->first; count = pH->count; } - *pHash = h; + if( pHash ) *pHash = h; while( count-- ){ assert( elem!=0 ); if( sqlite3StrICmp(elem->pKey,pKey)==0 ){ @@ -29299,7 +31173,7 @@ static HashElem *findElementWithHash( } elem = elem->next; } - return 0; + return &nullElement; } /* Remove a single entry from the hash table given a pointer to that @@ -29341,13 +31215,9 @@ static void removeElementGivenHash( ** found, or NULL if there is no match. */ SQLITE_PRIVATE void *sqlite3HashFind(const Hash *pH, const char *pKey){ - HashElem *elem; /* The element that matches key */ - unsigned int h; /* A hash on key */ - assert( pH!=0 ); assert( pKey!=0 ); - elem = findElementWithHash(pH, pKey, &h); - return elem ? elem->data : 0; + return findElementWithHash(pH, pKey, 0)->data; } /* Insert an element into the hash table pH. The key is pKey @@ -29372,7 +31242,7 @@ SQLITE_PRIVATE void *sqlite3HashInsert(Hash *pH, const char *pKey, void *data){ assert( pH!=0 ); assert( pKey!=0 ); elem = findElementWithHash(pH,pKey,&h); - if( elem ){ + if( elem->data ){ void *old_data = elem->data; if( data==0 ){ removeElementGivenHash(pH,elem,h); @@ -29435,145 +31305,155 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){ /* 20 */ "Once" OpHelp(""), /* 21 */ "If" OpHelp(""), /* 22 */ "IfNot" OpHelp(""), - /* 23 */ "SeekLT" OpHelp("key=r[P3@P4]"), - /* 24 */ "SeekLE" OpHelp("key=r[P3@P4]"), - /* 25 */ "SeekGE" OpHelp("key=r[P3@P4]"), - /* 26 */ "SeekGT" OpHelp("key=r[P3@P4]"), - /* 27 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"), - /* 28 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"), - /* 29 */ "NoConflict" OpHelp("key=r[P3@P4]"), - /* 30 */ "NotFound" OpHelp("key=r[P3@P4]"), - /* 31 */ "Found" OpHelp("key=r[P3@P4]"), - /* 32 */ "SeekRowid" OpHelp("intkey=r[P3]"), - /* 33 */ "NotExists" OpHelp("intkey=r[P3]"), - /* 34 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"), - /* 35 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"), - /* 36 */ "Ne" OpHelp("IF r[P3]!=r[P1]"), - /* 37 */ "Eq" OpHelp("IF r[P3]==r[P1]"), - /* 38 */ "Gt" OpHelp("IF r[P3]>r[P1]"), - /* 39 */ "Le" OpHelp("IF r[P3]<=r[P1]"), - /* 40 */ "Lt" OpHelp("IF r[P3]<r[P1]"), - /* 41 */ "Ge" OpHelp("IF r[P3]>=r[P1]"), - /* 42 */ "ElseNotEq" OpHelp(""), - /* 43 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"), - /* 44 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"), - /* 45 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<<r[P1]"), - /* 46 */ "ShiftRight" OpHelp("r[P3]=r[P2]>>r[P1]"), - /* 47 */ "Add" OpHelp("r[P3]=r[P1]+r[P2]"), - /* 48 */ "Subtract" OpHelp("r[P3]=r[P2]-r[P1]"), - /* 49 */ "Multiply" OpHelp("r[P3]=r[P1]*r[P2]"), - /* 50 */ "Divide" OpHelp("r[P3]=r[P2]/r[P1]"), - /* 51 */ "Remainder" OpHelp("r[P3]=r[P2]%r[P1]"), - /* 52 */ "Concat" OpHelp("r[P3]=r[P2]+r[P1]"), - /* 53 */ "Last" OpHelp(""), - /* 54 */ "BitNot" OpHelp("r[P1]= ~r[P1]"), - /* 55 */ "SorterSort" OpHelp(""), - /* 56 */ "Sort" OpHelp(""), - /* 57 */ "Rewind" OpHelp(""), - /* 58 */ "IdxLE" OpHelp("key=r[P3@P4]"), - /* 59 */ "IdxGT" OpHelp("key=r[P3@P4]"), - /* 60 */ "IdxLT" OpHelp("key=r[P3@P4]"), - /* 61 */ "IdxGE" OpHelp("key=r[P3@P4]"), - /* 62 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"), - /* 63 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"), - /* 64 */ "Program" OpHelp(""), - /* 65 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"), - /* 66 */ "IfPos" OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"), - /* 67 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]--, goto P2"), - /* 68 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"), - /* 69 */ "IncrVacuum" OpHelp(""), - /* 70 */ "VNext" OpHelp(""), - /* 71 */ "Init" OpHelp("Start at P2"), - /* 72 */ "Return" OpHelp(""), - /* 73 */ "EndCoroutine" OpHelp(""), - /* 74 */ "HaltIfNull" OpHelp("if r[P3]=null halt"), - /* 75 */ "Halt" OpHelp(""), - /* 76 */ "Integer" OpHelp("r[P2]=P1"), - /* 77 */ "Int64" OpHelp("r[P2]=P4"), - /* 78 */ "String" OpHelp("r[P2]='P4' (len=P1)"), - /* 79 */ "Null" OpHelp("r[P2..P3]=NULL"), - /* 80 */ "SoftNull" OpHelp("r[P1]=NULL"), - /* 81 */ "Blob" OpHelp("r[P2]=P4 (len=P1)"), - /* 82 */ "Variable" OpHelp("r[P2]=parameter(P1,P4)"), - /* 83 */ "Move" OpHelp("r[P2@P3]=r[P1@P3]"), - /* 84 */ "Copy" OpHelp("r[P2@P3+1]=r[P1@P3+1]"), - /* 85 */ "SCopy" OpHelp("r[P2]=r[P1]"), - /* 86 */ "IntCopy" OpHelp("r[P2]=r[P1]"), - /* 87 */ "ResultRow" OpHelp("output=r[P1@P2]"), - /* 88 */ "CollSeq" OpHelp(""), - /* 89 */ "Function0" OpHelp("r[P3]=func(r[P2@P5])"), - /* 90 */ "Function" OpHelp("r[P3]=func(r[P2@P5])"), - /* 91 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"), - /* 92 */ "RealAffinity" OpHelp(""), - /* 93 */ "Cast" OpHelp("affinity(r[P1])"), - /* 94 */ "Permutation" OpHelp(""), - /* 95 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"), - /* 96 */ "Column" OpHelp("r[P3]=PX"), - /* 97 */ "String8" OpHelp("r[P2]='P4'"), - /* 98 */ "Affinity" OpHelp("affinity(r[P1@P2])"), - /* 99 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"), - /* 100 */ "Count" OpHelp("r[P2]=count()"), - /* 101 */ "ReadCookie" OpHelp(""), - /* 102 */ "SetCookie" OpHelp(""), - /* 103 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"), - /* 104 */ "OpenRead" OpHelp("root=P2 iDb=P3"), - /* 105 */ "OpenWrite" OpHelp("root=P2 iDb=P3"), - /* 106 */ "OpenAutoindex" OpHelp("nColumn=P2"), - /* 107 */ "OpenEphemeral" OpHelp("nColumn=P2"), - /* 108 */ "SorterOpen" OpHelp(""), - /* 109 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"), - /* 110 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"), - /* 111 */ "Close" OpHelp(""), - /* 112 */ "ColumnsUsed" OpHelp(""), - /* 113 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"), - /* 114 */ "NewRowid" OpHelp("r[P2]=rowid"), - /* 115 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"), - /* 116 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"), - /* 117 */ "Delete" OpHelp(""), - /* 118 */ "ResetCount" OpHelp(""), - /* 119 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"), - /* 120 */ "SorterData" OpHelp("r[P2]=data"), - /* 121 */ "RowData" OpHelp("r[P2]=data"), - /* 122 */ "Rowid" OpHelp("r[P2]=rowid"), - /* 123 */ "NullRow" OpHelp(""), - /* 124 */ "SorterInsert" OpHelp("key=r[P2]"), - /* 125 */ "IdxInsert" OpHelp("key=r[P2]"), - /* 126 */ "IdxDelete" OpHelp("key=r[P2@P3]"), - /* 127 */ "Seek" OpHelp("Move P3 to P1.rowid"), - /* 128 */ "IdxRowid" OpHelp("r[P2]=rowid"), - /* 129 */ "Destroy" OpHelp(""), - /* 130 */ "Clear" OpHelp(""), - /* 131 */ "ResetSorter" OpHelp(""), - /* 132 */ "Real" OpHelp("r[P2]=P4"), - /* 133 */ "CreateIndex" OpHelp("r[P2]=root iDb=P1"), - /* 134 */ "CreateTable" OpHelp("r[P2]=root iDb=P1"), - /* 135 */ "ParseSchema" OpHelp(""), - /* 136 */ "LoadAnalysis" OpHelp(""), - /* 137 */ "DropTable" OpHelp(""), - /* 138 */ "DropIndex" OpHelp(""), - /* 139 */ "DropTrigger" OpHelp(""), - /* 140 */ "IntegrityCk" OpHelp(""), - /* 141 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"), - /* 142 */ "Param" OpHelp(""), - /* 143 */ "FkCounter" OpHelp("fkctr[P1]+=P2"), - /* 144 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"), - /* 145 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"), - /* 146 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"), - /* 147 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"), - /* 148 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), - /* 149 */ "Expire" OpHelp(""), - /* 150 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), - /* 151 */ "VBegin" OpHelp(""), - /* 152 */ "VCreate" OpHelp(""), - /* 153 */ "VDestroy" OpHelp(""), - /* 154 */ "VOpen" OpHelp(""), - /* 155 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), - /* 156 */ "VRename" OpHelp(""), - /* 157 */ "Pagecount" OpHelp(""), - /* 158 */ "MaxPgcnt" OpHelp(""), - /* 159 */ "CursorHint" OpHelp(""), - /* 160 */ "Noop" OpHelp(""), - /* 161 */ "Explain" OpHelp(""), + /* 23 */ "IfNullRow" OpHelp("if P1.nullRow then r[P3]=NULL, goto P2"), + /* 24 */ "SeekLT" OpHelp("key=r[P3@P4]"), + /* 25 */ "SeekLE" OpHelp("key=r[P3@P4]"), + /* 26 */ "SeekGE" OpHelp("key=r[P3@P4]"), + /* 27 */ "SeekGT" OpHelp("key=r[P3@P4]"), + /* 28 */ "NoConflict" OpHelp("key=r[P3@P4]"), + /* 29 */ "NotFound" OpHelp("key=r[P3@P4]"), + /* 30 */ "Found" OpHelp("key=r[P3@P4]"), + /* 31 */ "SeekRowid" OpHelp("intkey=r[P3]"), + /* 32 */ "NotExists" OpHelp("intkey=r[P3]"), + /* 33 */ "Last" OpHelp(""), + /* 34 */ "IfSmaller" OpHelp(""), + /* 35 */ "SorterSort" OpHelp(""), + /* 36 */ "Sort" OpHelp(""), + /* 37 */ "Rewind" OpHelp(""), + /* 38 */ "IdxLE" OpHelp("key=r[P3@P4]"), + /* 39 */ "IdxGT" OpHelp("key=r[P3@P4]"), + /* 40 */ "IdxLT" OpHelp("key=r[P3@P4]"), + /* 41 */ "IdxGE" OpHelp("key=r[P3@P4]"), + /* 42 */ "RowSetRead" OpHelp("r[P3]=rowset(P1)"), + /* 43 */ "Or" OpHelp("r[P3]=(r[P1] || r[P2])"), + /* 44 */ "And" OpHelp("r[P3]=(r[P1] && r[P2])"), + /* 45 */ "RowSetTest" OpHelp("if r[P3] in rowset(P1) goto P2"), + /* 46 */ "Program" OpHelp(""), + /* 47 */ "FkIfZero" OpHelp("if fkctr[P1]==0 goto P2"), + /* 48 */ "IfPos" OpHelp("if r[P1]>0 then r[P1]-=P3, goto P2"), + /* 49 */ "IfNotZero" OpHelp("if r[P1]!=0 then r[P1]--, goto P2"), + /* 50 */ "IsNull" OpHelp("if r[P1]==NULL goto P2"), + /* 51 */ "NotNull" OpHelp("if r[P1]!=NULL goto P2"), + /* 52 */ "Ne" OpHelp("IF r[P3]!=r[P1]"), + /* 53 */ "Eq" OpHelp("IF r[P3]==r[P1]"), + /* 54 */ "Gt" OpHelp("IF r[P3]>r[P1]"), + /* 55 */ "Le" OpHelp("IF r[P3]<=r[P1]"), + /* 56 */ "Lt" OpHelp("IF r[P3]<r[P1]"), + /* 57 */ "Ge" OpHelp("IF r[P3]>=r[P1]"), + /* 58 */ "ElseNotEq" OpHelp(""), + /* 59 */ "DecrJumpZero" OpHelp("if (--r[P1])==0 goto P2"), + /* 60 */ "IncrVacuum" OpHelp(""), + /* 61 */ "VNext" OpHelp(""), + /* 62 */ "Init" OpHelp("Start at P2"), + /* 63 */ "Return" OpHelp(""), + /* 64 */ "EndCoroutine" OpHelp(""), + /* 65 */ "HaltIfNull" OpHelp("if r[P3]=null halt"), + /* 66 */ "Halt" OpHelp(""), + /* 67 */ "Integer" OpHelp("r[P2]=P1"), + /* 68 */ "Int64" OpHelp("r[P2]=P4"), + /* 69 */ "String" OpHelp("r[P2]='P4' (len=P1)"), + /* 70 */ "Null" OpHelp("r[P2..P3]=NULL"), + /* 71 */ "SoftNull" OpHelp("r[P1]=NULL"), + /* 72 */ "Blob" OpHelp("r[P2]=P4 (len=P1)"), + /* 73 */ "Variable" OpHelp("r[P2]=parameter(P1,P4)"), + /* 74 */ "Move" OpHelp("r[P2@P3]=r[P1@P3]"), + /* 75 */ "Copy" OpHelp("r[P2@P3+1]=r[P1@P3+1]"), + /* 76 */ "SCopy" OpHelp("r[P2]=r[P1]"), + /* 77 */ "IntCopy" OpHelp("r[P2]=r[P1]"), + /* 78 */ "ResultRow" OpHelp("output=r[P1@P2]"), + /* 79 */ "CollSeq" OpHelp(""), + /* 80 */ "AddImm" OpHelp("r[P1]=r[P1]+P2"), + /* 81 */ "RealAffinity" OpHelp(""), + /* 82 */ "Cast" OpHelp("affinity(r[P1])"), + /* 83 */ "Permutation" OpHelp(""), + /* 84 */ "Compare" OpHelp("r[P1@P3] <-> r[P2@P3]"), + /* 85 */ "BitAnd" OpHelp("r[P3]=r[P1]&r[P2]"), + /* 86 */ "BitOr" OpHelp("r[P3]=r[P1]|r[P2]"), + /* 87 */ "ShiftLeft" OpHelp("r[P3]=r[P2]<<r[P1]"), + /* 88 */ "ShiftRight" OpHelp("r[P3]=r[P2]>>r[P1]"), + /* 89 */ "Add" OpHelp("r[P3]=r[P1]+r[P2]"), + /* 90 */ "Subtract" OpHelp("r[P3]=r[P2]-r[P1]"), + /* 91 */ "Multiply" OpHelp("r[P3]=r[P1]*r[P2]"), + /* 92 */ "Divide" OpHelp("r[P3]=r[P2]/r[P1]"), + /* 93 */ "Remainder" OpHelp("r[P3]=r[P2]%r[P1]"), + /* 94 */ "Concat" OpHelp("r[P3]=r[P2]+r[P1]"), + /* 95 */ "IsTrue" OpHelp("r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4"), + /* 96 */ "BitNot" OpHelp("r[P1]= ~r[P1]"), + /* 97 */ "Offset" OpHelp("r[P3] = sqlite_offset(P1)"), + /* 98 */ "Column" OpHelp("r[P3]=PX"), + /* 99 */ "String8" OpHelp("r[P2]='P4'"), + /* 100 */ "Affinity" OpHelp("affinity(r[P1@P2])"), + /* 101 */ "MakeRecord" OpHelp("r[P3]=mkrec(r[P1@P2])"), + /* 102 */ "Count" OpHelp("r[P2]=count()"), + /* 103 */ "ReadCookie" OpHelp(""), + /* 104 */ "SetCookie" OpHelp(""), + /* 105 */ "ReopenIdx" OpHelp("root=P2 iDb=P3"), + /* 106 */ "OpenRead" OpHelp("root=P2 iDb=P3"), + /* 107 */ "OpenWrite" OpHelp("root=P2 iDb=P3"), + /* 108 */ "OpenDup" OpHelp(""), + /* 109 */ "OpenAutoindex" OpHelp("nColumn=P2"), + /* 110 */ "OpenEphemeral" OpHelp("nColumn=P2"), + /* 111 */ "SorterOpen" OpHelp(""), + /* 112 */ "SequenceTest" OpHelp("if( cursor[P1].ctr++ ) pc = P2"), + /* 113 */ "OpenPseudo" OpHelp("P3 columns in r[P2]"), + /* 114 */ "Close" OpHelp(""), + /* 115 */ "ColumnsUsed" OpHelp(""), + /* 116 */ "Sequence" OpHelp("r[P2]=cursor[P1].ctr++"), + /* 117 */ "NewRowid" OpHelp("r[P2]=rowid"), + /* 118 */ "Insert" OpHelp("intkey=r[P3] data=r[P2]"), + /* 119 */ "InsertInt" OpHelp("intkey=P3 data=r[P2]"), + /* 120 */ "Delete" OpHelp(""), + /* 121 */ "ResetCount" OpHelp(""), + /* 122 */ "SorterCompare" OpHelp("if key(P1)!=trim(r[P3],P4) goto P2"), + /* 123 */ "SorterData" OpHelp("r[P2]=data"), + /* 124 */ "RowData" OpHelp("r[P2]=data"), + /* 125 */ "Rowid" OpHelp("r[P2]=rowid"), + /* 126 */ "NullRow" OpHelp(""), + /* 127 */ "SeekEnd" OpHelp(""), + /* 128 */ "SorterInsert" OpHelp("key=r[P2]"), + /* 129 */ "IdxInsert" OpHelp("key=r[P2]"), + /* 130 */ "IdxDelete" OpHelp("key=r[P2@P3]"), + /* 131 */ "DeferredSeek" OpHelp("Move P3 to P1.rowid if needed"), + /* 132 */ "IdxRowid" OpHelp("r[P2]=rowid"), + /* 133 */ "Destroy" OpHelp(""), + /* 134 */ "Real" OpHelp("r[P2]=P4"), + /* 135 */ "Clear" OpHelp(""), + /* 136 */ "ResetSorter" OpHelp(""), + /* 137 */ "CreateBtree" OpHelp("r[P2]=root iDb=P1 flags=P3"), + /* 138 */ "SqlExec" OpHelp(""), + /* 139 */ "ParseSchema" OpHelp(""), + /* 140 */ "LoadAnalysis" OpHelp(""), + /* 141 */ "DropTable" OpHelp(""), + /* 142 */ "DropIndex" OpHelp(""), + /* 143 */ "DropTrigger" OpHelp(""), + /* 144 */ "IntegrityCk" OpHelp(""), + /* 145 */ "RowSetAdd" OpHelp("rowset(P1)=r[P2]"), + /* 146 */ "Param" OpHelp(""), + /* 147 */ "FkCounter" OpHelp("fkctr[P1]+=P2"), + /* 148 */ "MemMax" OpHelp("r[P1]=max(r[P1],r[P2])"), + /* 149 */ "OffsetLimit" OpHelp("if r[P1]>0 then r[P2]=r[P1]+max(0,r[P3]) else r[P2]=(-1)"), + /* 150 */ "AggStep0" OpHelp("accum=r[P3] step(r[P2@P5])"), + /* 151 */ "AggStep" OpHelp("accum=r[P3] step(r[P2@P5])"), + /* 152 */ "AggFinal" OpHelp("accum=r[P1] N=P2"), + /* 153 */ "Expire" OpHelp(""), + /* 154 */ "TableLock" OpHelp("iDb=P1 root=P2 write=P3"), + /* 155 */ "VBegin" OpHelp(""), + /* 156 */ "VCreate" OpHelp(""), + /* 157 */ "VDestroy" OpHelp(""), + /* 158 */ "VOpen" OpHelp(""), + /* 159 */ "VColumn" OpHelp("r[P3]=vcolumn(P2)"), + /* 160 */ "VRename" OpHelp(""), + /* 161 */ "Pagecount" OpHelp(""), + /* 162 */ "MaxPgcnt" OpHelp(""), + /* 163 */ "PureFunc0" OpHelp(""), + /* 164 */ "Function0" OpHelp("r[P3]=func(r[P2@P5])"), + /* 165 */ "PureFunc" OpHelp(""), + /* 166 */ "Function" OpHelp("r[P3]=func(r[P2@P5])"), + /* 167 */ "Trace" OpHelp(""), + /* 168 */ "CursorHint" OpHelp(""), + /* 169 */ "Noop" OpHelp(""), + /* 170 */ "Explain" OpHelp(""), + /* 171 */ "Abortable" OpHelp(""), }; return azName[i]; } @@ -29673,6 +31553,7 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){ #include <sys/types.h> #include <sys/stat.h> #include <fcntl.h> +#include <sys/ioctl.h> #include <unistd.h> /* #include <time.h> */ #include <sys/time.h> @@ -29682,7 +31563,7 @@ SQLITE_PRIVATE const char *sqlite3OpcodeName(int i){ #endif #if SQLITE_ENABLE_LOCKING_STYLE -# include <sys/ioctl.h> +/* # include <sys/ioctl.h> */ # include <sys/file.h> # include <sys/param.h> #endif /* SQLITE_ENABLE_LOCKING_STYLE */ @@ -29792,7 +31673,7 @@ struct unixFile { unsigned short int ctrlFlags; /* Behavioral bits. UNIXFILE_* flags */ int lastErrno; /* The unix errno from last I/O error */ void *lockingContext; /* Locking style specific state */ - UnixUnusedFd *pUnused; /* Pre-allocated UnixUnusedFd */ + UnixUnusedFd *pPreallocatedUnused; /* Pre-allocated UnixUnusedFd */ const char *zPath; /* Name of the file */ unixShm *pShm; /* Shared memory segment information */ int szChunk; /* Configured by FCNTL_CHUNK_SIZE */ @@ -29803,16 +31684,17 @@ struct unixFile { sqlite3_int64 mmapSizeMax; /* Configured FCNTL_MMAP_SIZE value */ void *pMapRegion; /* Memory mapped region */ #endif -#ifdef __QNXNTO__ int sectorSize; /* Device sector size */ int deviceCharacteristics; /* Precomputed device characteristics */ -#endif #if SQLITE_ENABLE_LOCKING_STYLE int openFlags; /* The flags specified at open() */ #endif #if SQLITE_ENABLE_LOCKING_STYLE || defined(__APPLE__) unsigned fsFlags; /* cached details from statfs() */ #endif +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT + unsigned iBusyTimeout; /* Wait this many millisec on locks */ +#endif #if OS_VXWORKS struct vxworksFileId *pId; /* Unique file ID */ #endif @@ -30109,6 +31991,20 @@ SQLITE_API extern int sqlite3_open_file_count; # define lseek lseek64 #endif +#ifdef __linux__ +/* +** Linux-specific IOCTL magic numbers used for controlling F2FS +*/ +#define F2FS_IOCTL_MAGIC 0xf5 +#define F2FS_IOC_START_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 1) +#define F2FS_IOC_COMMIT_ATOMIC_WRITE _IO(F2FS_IOCTL_MAGIC, 2) +#define F2FS_IOC_START_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 3) +#define F2FS_IOC_ABORT_VOLATILE_WRITE _IO(F2FS_IOCTL_MAGIC, 5) +#define F2FS_IOC_GET_FEATURES _IOR(F2FS_IOCTL_MAGIC, 12, u32) +#define F2FS_FEATURE_ATOMIC_WRITE 0x0004 +#endif /* __linux__ */ + + /* ** Different Unix systems declare open() in different ways. Same use ** open(const char*,int,mode_t). Others use open(const char*,int,...). @@ -30236,7 +32132,11 @@ static struct unix_syscall { #endif #define osFchown ((int(*)(int,uid_t,gid_t))aSyscall[20].pCurrent) +#if defined(HAVE_FCHOWN) { "geteuid", (sqlite3_syscall_ptr)geteuid, 0 }, +#else + { "geteuid", (sqlite3_syscall_ptr)0, 0 }, +#endif #define osGeteuid ((uid_t(*)(void))aSyscall[21].pCurrent) #if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 @@ -30251,7 +32151,7 @@ static struct unix_syscall { #else { "munmap", (sqlite3_syscall_ptr)0, 0 }, #endif -#define osMunmap ((void*(*)(void*,size_t))aSyscall[23].pCurrent) +#define osMunmap ((int(*)(void*,size_t))aSyscall[23].pCurrent) #if HAVE_MREMAP && (!defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0) { "mremap", (sqlite3_syscall_ptr)mremap, 0 }, @@ -30281,6 +32181,13 @@ static struct unix_syscall { #endif #define osLstat ((int(*)(const char*,struct stat*))aSyscall[27].pCurrent) +#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + { "ioctl", (sqlite3_syscall_ptr)ioctl, 0 }, +#else + { "ioctl", (sqlite3_syscall_ptr)0, 0 }, +#endif +#define osIoctl ((int(*)(int,int,...))aSyscall[28].pCurrent) + }; /* End of the overrideable system calls */ @@ -30457,15 +32364,16 @@ static int robust_open(const char *z, int f, mode_t m){ ** assert( unixMutexHeld() ); ** unixEnterLeave() */ +static sqlite3_mutex *unixBigLock = 0; static void unixEnterMutex(void){ - sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + sqlite3_mutex_enter(unixBigLock); } static void unixLeaveMutex(void){ - sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + sqlite3_mutex_leave(unixBigLock); } #ifdef SQLITE_DEBUG static int unixMutexHeld(void) { - return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + return sqlite3_mutex_held(unixBigLock); } #endif @@ -30885,7 +32793,8 @@ struct unixInodeInfo { /* ** A lists of all unixInodeInfo objects. */ -static unixInodeInfo *inodeList = 0; +static unixInodeInfo *inodeList = 0; /* All unixInodeInfo objects */ +static unsigned int nUnusedFd = 0; /* Total unused file descriptors */ /* ** @@ -30995,6 +32904,7 @@ static void closePendingFds(unixFile *pFile){ pNext = p->pNext; robust_close(pFile, p->fd, __LINE__); sqlite3_free(p); + nUnusedFd--; } pInode->pUnused = 0; } @@ -31027,6 +32937,7 @@ static void releaseInodeInfo(unixFile *pFile){ sqlite3_free(pInode); } } + assert( inodeList!=0 || nUnusedFd==0 ); } /* @@ -31096,6 +33007,7 @@ static int findInodeInfo( #else fileId.ino = (u64)statbuf.st_ino; #endif + assert( inodeList!=0 || nUnusedFd==0 ); pInode = inodeList; while( pInode && memcmp(&fileId, &pInode->fileId, sizeof(fileId)) ){ pInode = pInode->pNext; @@ -31218,6 +33130,43 @@ static int unixCheckReservedLock(sqlite3_file *id, int *pResOut){ } /* +** Set a posix-advisory-lock. +** +** There are two versions of this routine. If compiled with +** SQLITE_ENABLE_SETLK_TIMEOUT then the routine has an extra parameter +** which is a pointer to a unixFile. If the unixFile->iBusyTimeout +** value is set, then it is the number of milliseconds to wait before +** failing the lock. The iBusyTimeout value is always reset back to +** zero on each call. +** +** If SQLITE_ENABLE_SETLK_TIMEOUT is not defined, then do a non-blocking +** attempt to set the lock. +*/ +#ifndef SQLITE_ENABLE_SETLK_TIMEOUT +# define osSetPosixAdvisoryLock(h,x,t) osFcntl(h,F_SETLK,x) +#else +static int osSetPosixAdvisoryLock( + int h, /* The file descriptor on which to take the lock */ + struct flock *pLock, /* The description of the lock */ + unixFile *pFile /* Structure holding timeout value */ +){ + int rc = osFcntl(h,F_SETLK,pLock); + while( rc<0 && pFile->iBusyTimeout>0 ){ + /* On systems that support some kind of blocking file lock with a timeout, + ** make appropriate changes here to invoke that blocking file lock. On + ** generic posix, however, there is no such API. So we simply try the + ** lock once every millisecond until either the timeout expires, or until + ** the lock is obtained. */ + usleep(1000); + rc = osFcntl(h,F_SETLK,pLock); + pFile->iBusyTimeout--; + } + return rc; +} +#endif /* SQLITE_ENABLE_SETLK_TIMEOUT */ + + +/* ** Attempt to set a system-lock on the file pFile. The lock is ** described by pLock. ** @@ -31249,7 +33198,7 @@ static int unixFileLock(unixFile *pFile, struct flock *pLock){ lock.l_start = SHARED_FIRST; lock.l_len = SHARED_SIZE; lock.l_type = F_WRLCK; - rc = osFcntl(pFile->h, F_SETLK, &lock); + rc = osSetPosixAdvisoryLock(pFile->h, &lock, pFile); if( rc<0 ) return rc; pInode->bProcessLock = 1; pInode->nLock++; @@ -31257,7 +33206,7 @@ static int unixFileLock(unixFile *pFile, struct flock *pLock){ rc = 0; } }else{ - rc = osFcntl(pFile->h, F_SETLK, pLock); + rc = osSetPosixAdvisoryLock(pFile->h, pLock, pFile); } return rc; } @@ -31515,11 +33464,12 @@ end_lock: */ static void setPendingFd(unixFile *pFile){ unixInodeInfo *pInode = pFile->pInode; - UnixUnusedFd *p = pFile->pUnused; + UnixUnusedFd *p = pFile->pPreallocatedUnused; p->pNext = pInode->pUnused; pInode->pUnused = p; pFile->h = -1; - pFile->pUnused = 0; + pFile->pPreallocatedUnused = 0; + nUnusedFd++; } /* @@ -31744,7 +33694,7 @@ static int closeUnixFile(sqlite3_file *id){ #endif OSTRACE(("CLOSE %-3d\n", pFile->h)); OpenCounter(-1); - sqlite3_free(pFile->pUnused); + sqlite3_free(pFile->pPreallocatedUnused); memset(pFile, 0, sizeof(unixFile)); return SQLITE_OK; } @@ -32081,7 +34031,7 @@ static int flockCheckReservedLock(sqlite3_file *id, int *pResOut){ OSTRACE(("TEST WR-LOCK %d %d %d (flock)\n", pFile->h, rc, reserved)); #ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS - if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){ + if( (rc & 0xff) == SQLITE_IOERR ){ rc = SQLITE_OK; reserved=1; } @@ -32148,7 +34098,7 @@ static int flockLock(sqlite3_file *id, int eFileLock) { OSTRACE(("LOCK %d %s %s (flock)\n", pFile->h, azFileLock(eFileLock), rc==SQLITE_OK ? "ok" : "failed")); #ifdef SQLITE_IGNORE_FLOCK_LOCK_ERRORS - if( (rc & SQLITE_IOERR) == SQLITE_IOERR ){ + if( (rc & 0xff) == SQLITE_IOERR ){ rc = SQLITE_BUSY; } #endif /* SQLITE_IGNORE_FLOCK_LOCK_ERRORS */ @@ -32685,7 +34635,7 @@ static int afpLock(sqlite3_file *id, int eFileLock){ /* Can't reestablish the shared lock. Sqlite can't deal, this is ** a critical I/O error */ - rc = ((failed & SQLITE_IOERR) == SQLITE_IOERR) ? failed2 : + rc = ((failed & 0xff) == SQLITE_IOERR) ? failed2 : SQLITE_IOERR_LOCK; goto afp_end_lock; } @@ -32965,7 +34915,7 @@ static int unixRead( /* If this is a database file (not a journal, master-journal or temp ** file), the bytes in the locking range should never be read or written. */ #if 0 - assert( pFile->pUnused==0 + assert( pFile->pPreallocatedUnused==0 || offset>=PENDING_BYTE+512 || offset+amt<=PENDING_BYTE ); @@ -33078,7 +35028,7 @@ static int unixWrite( /* If this is a database file (not a journal, master-journal or temp ** file), the bytes in the locking range should never be read or written. */ #if 0 - assert( pFile->pUnused==0 + assert( pFile->pPreallocatedUnused==0 || offset>=PENDING_BYTE+512 || offset+amt<=PENDING_BYTE ); @@ -33490,7 +35440,7 @@ static int fcntlSizeHint(unixFile *pFile, i64 nByte){ do{ err = osFallocate(pFile->h, buf.st_size, nSize-buf.st_size); }while( err==EINTR ); - if( err ) return SQLITE_IOERR_WRITE; + if( err && err!=EINVAL ) return SQLITE_IOERR_WRITE; #else /* If the OS does not have posix_fallocate(), fake it. Write a ** single byte to the last byte in each block that falls entirely @@ -33558,6 +35508,21 @@ static int unixGetTempname(int nBuf, char *zBuf); static int unixFileControl(sqlite3_file *id, int op, void *pArg){ unixFile *pFile = (unixFile*)id; switch( op ){ +#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + case SQLITE_FCNTL_BEGIN_ATOMIC_WRITE: { + int rc = osIoctl(pFile->h, F2FS_IOC_START_ATOMIC_WRITE); + return rc ? SQLITE_IOERR_BEGIN_ATOMIC : SQLITE_OK; + } + case SQLITE_FCNTL_COMMIT_ATOMIC_WRITE: { + int rc = osIoctl(pFile->h, F2FS_IOC_COMMIT_ATOMIC_WRITE); + return rc ? SQLITE_IOERR_COMMIT_ATOMIC : SQLITE_OK; + } + case SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE: { + int rc = osIoctl(pFile->h, F2FS_IOC_ABORT_VOLATILE_WRITE); + return rc ? SQLITE_IOERR_ROLLBACK_ATOMIC : SQLITE_OK; + } +#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */ + case SQLITE_FCNTL_LOCKSTATE: { *(int*)pArg = pFile->eFileLock; return SQLITE_OK; @@ -33601,6 +35566,12 @@ static int unixFileControl(sqlite3_file *id, int op, void *pArg){ *(int*)pArg = fileHasMoved(pFile); return SQLITE_OK; } +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT + case SQLITE_FCNTL_LOCK_TIMEOUT: { + pFile->iBusyTimeout = *(int*)pArg; + return SQLITE_OK; + } +#endif #if SQLITE_MAX_MMAP_SIZE>0 case SQLITE_FCNTL_MMAP_SIZE: { i64 newLimit = *(i64*)pArg; @@ -33608,6 +35579,14 @@ static int unixFileControl(sqlite3_file *id, int op, void *pArg){ if( newLimit>sqlite3GlobalConfig.mxMmap ){ newLimit = sqlite3GlobalConfig.mxMmap; } + + /* The value of newLimit may be eventually cast to (size_t) and passed + ** to mmap(). Restrict its value to 2GB if (size_t) is not at least a + ** 64-bit type. */ + if( newLimit>0 && sizeof(size_t)<8 ){ + newLimit = (newLimit & 0x7FFFFFFF); + } + *(i64*)pArg = pFile->mmapSizeMax; if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){ pFile->mmapSizeMax = newLimit; @@ -33641,30 +35620,41 @@ static int unixFileControl(sqlite3_file *id, int op, void *pArg){ } /* -** Return the sector size in bytes of the underlying block device for -** the specified file. This is almost always 512 bytes, but may be -** larger for some devices. +** If pFd->sectorSize is non-zero when this function is called, it is a +** no-op. Otherwise, the values of pFd->sectorSize and +** pFd->deviceCharacteristics are set according to the file-system +** characteristics. ** -** SQLite code assumes this function cannot fail. It also assumes that -** if two files are created in the same file-system directory (i.e. -** a database and its journal file) that the sector size will be the -** same for both. +** There are two versions of this function. One for QNX and one for all +** other systems. */ -#ifndef __QNXNTO__ -static int unixSectorSize(sqlite3_file *NotUsed){ - UNUSED_PARAMETER(NotUsed); - return SQLITE_DEFAULT_SECTOR_SIZE; -} -#endif +#ifndef __QNXNTO__ +static void setDeviceCharacteristics(unixFile *pFd){ + assert( pFd->deviceCharacteristics==0 || pFd->sectorSize!=0 ); + if( pFd->sectorSize==0 ){ +#if defined(__linux__) && defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + int res; + u32 f = 0; -/* -** The following version of unixSectorSize() is optimized for QNX. -*/ -#ifdef __QNXNTO__ + /* Check for support for F2FS atomic batch writes. */ + res = osIoctl(pFd->h, F2FS_IOC_GET_FEATURES, &f); + if( res==0 && (f & F2FS_FEATURE_ATOMIC_WRITE) ){ + pFd->deviceCharacteristics = SQLITE_IOCAP_BATCH_ATOMIC; + } +#endif /* __linux__ && SQLITE_ENABLE_BATCH_ATOMIC_WRITE */ + + /* Set the POWERSAFE_OVERWRITE flag if requested. */ + if( pFd->ctrlFlags & UNIXFILE_PSOW ){ + pFd->deviceCharacteristics |= SQLITE_IOCAP_POWERSAFE_OVERWRITE; + } + + pFd->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE; + } +} +#else #include <sys/dcmd_blk.h> #include <sys/statvfs.h> -static int unixSectorSize(sqlite3_file *id){ - unixFile *pFile = (unixFile*)id; +static void setDeviceCharacteristics(unixFile *pFile){ if( pFile->sectorSize == 0 ){ struct statvfs fsInfo; @@ -33672,7 +35662,7 @@ static int unixSectorSize(sqlite3_file *id){ pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE; pFile->deviceCharacteristics = 0; if( fstatvfs(pFile->h, &fsInfo) == -1 ) { - return pFile->sectorSize; + return; } if( !strcmp(fsInfo.f_basetype, "tmp") ) { @@ -33733,9 +35723,24 @@ static int unixSectorSize(sqlite3_file *id){ pFile->deviceCharacteristics = 0; pFile->sectorSize = SQLITE_DEFAULT_SECTOR_SIZE; } - return pFile->sectorSize; } -#endif /* __QNXNTO__ */ +#endif + +/* +** Return the sector size in bytes of the underlying block device for +** the specified file. This is almost always 512 bytes, but may be +** larger for some devices. +** +** SQLite code assumes this function cannot fail. It also assumes that +** if two files are created in the same file-system directory (i.e. +** a database and its journal file) that the sector size will be the +** same for both. +*/ +static int unixSectorSize(sqlite3_file *id){ + unixFile *pFd = (unixFile*)id; + setDeviceCharacteristics(pFd); + return pFd->sectorSize; +} /* ** Return the device characteristics for the file. @@ -33751,16 +35756,9 @@ static int unixSectorSize(sqlite3_file *id){ ** available to turn it off and URI query parameter available to turn it off. */ static int unixDeviceCharacteristics(sqlite3_file *id){ - unixFile *p = (unixFile*)id; - int rc = 0; -#ifdef __QNXNTO__ - if( p->sectorSize==0 ) unixSectorSize(id); - rc = p->deviceCharacteristics; -#endif - if( p->ctrlFlags & UNIXFILE_PSOW ){ - rc |= SQLITE_IOCAP_POWERSAFE_OVERWRITE; - } - return rc; + unixFile *pFd = (unixFile*)id; + setDeviceCharacteristics(pFd); + return pFd->deviceCharacteristics; } #if !defined(SQLITE_OMIT_WAL) || SQLITE_MAX_MMAP_SIZE>0 @@ -33822,6 +35820,7 @@ struct unixShmNode { int szRegion; /* Size of shared-memory regions */ u16 nRegion; /* Size of array apRegion */ u8 isReadonly; /* True if read-only */ + u8 isUnlocked; /* True if no DMS lock held */ char **apRegion; /* Array of mapped shared-memory regions */ int nRef; /* Number of unixShm objects pointing to this */ unixShm *pFirst; /* All unixShm objects pointing to this */ @@ -33878,7 +35877,7 @@ static int unixShmSystemLock( /* Access to the unixShmNode object is serialized by the caller */ pShmNode = pFile->pInode->pShmNode; - assert( sqlite3_mutex_held(pShmNode->mutex) || pShmNode->nRef==0 ); + assert( pShmNode->nRef==0 || sqlite3_mutex_held(pShmNode->mutex) ); /* Shared locks never span more than one byte */ assert( n==1 || lockType!=F_RDLCK ); @@ -33888,13 +35887,11 @@ static int unixShmSystemLock( if( pShmNode->h>=0 ){ /* Initialize the locking parameters */ - memset(&f, 0, sizeof(f)); f.l_type = lockType; f.l_whence = SEEK_SET; f.l_start = ofst; f.l_len = n; - - rc = osFcntl(pShmNode->h, F_SETLK, &f); + rc = osSetPosixAdvisoryLock(pShmNode->h, &f, pFile); rc = (rc!=(-1)) ? SQLITE_OK : SQLITE_BUSY; } @@ -33985,6 +35982,64 @@ static void unixShmPurge(unixFile *pFd){ } /* +** The DMS lock has not yet been taken on shm file pShmNode. Attempt to +** take it now. Return SQLITE_OK if successful, or an SQLite error +** code otherwise. +** +** If the DMS cannot be locked because this is a readonly_shm=1 +** connection and no other process already holds a lock, return +** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1. +*/ +static int unixLockSharedMemory(unixFile *pDbFd, unixShmNode *pShmNode){ + struct flock lock; + int rc = SQLITE_OK; + + /* Use F_GETLK to determine the locks other processes are holding + ** on the DMS byte. If it indicates that another process is holding + ** a SHARED lock, then this process may also take a SHARED lock + ** and proceed with opening the *-shm file. + ** + ** Or, if no other process is holding any lock, then this process + ** is the first to open it. In this case take an EXCLUSIVE lock on the + ** DMS byte and truncate the *-shm file to zero bytes in size. Then + ** downgrade to a SHARED lock on the DMS byte. + ** + ** If another process is holding an EXCLUSIVE lock on the DMS byte, + ** return SQLITE_BUSY to the caller (it will try again). An earlier + ** version of this code attempted the SHARED lock at this point. But + ** this introduced a subtle race condition: if the process holding + ** EXCLUSIVE failed just before truncating the *-shm file, then this + ** process might open and use the *-shm file without truncating it. + ** And if the *-shm file has been corrupted by a power failure or + ** system crash, the database itself may also become corrupt. */ + lock.l_whence = SEEK_SET; + lock.l_start = UNIX_SHM_DMS; + lock.l_len = 1; + lock.l_type = F_WRLCK; + if( osFcntl(pShmNode->h, F_GETLK, &lock)!=0 ) { + rc = SQLITE_IOERR_LOCK; + }else if( lock.l_type==F_UNLCK ){ + if( pShmNode->isReadonly ){ + pShmNode->isUnlocked = 1; + rc = SQLITE_READONLY_CANTINIT; + }else{ + rc = unixShmSystemLock(pDbFd, F_WRLCK, UNIX_SHM_DMS, 1); + if( rc==SQLITE_OK && robust_ftruncate(pShmNode->h, 0) ){ + rc = unixLogError(SQLITE_IOERR_SHMOPEN,"ftruncate",pShmNode->zFilename); + } + } + }else if( lock.l_type==F_WRLCK ){ + rc = SQLITE_BUSY; + } + + if( rc==SQLITE_OK ){ + assert( lock.l_type==F_UNLCK || lock.l_type==F_RDLCK ); + rc = unixShmSystemLock(pDbFd, F_RDLCK, UNIX_SHM_DMS, 1); + } + return rc; +} + +/* ** Open a shared-memory area associated with open database file pDbFd. ** This particular implementation uses mmapped files. ** @@ -34022,9 +36077,9 @@ static void unixShmPurge(unixFile *pFd){ static int unixOpenSharedMemory(unixFile *pDbFd){ struct unixShm *p = 0; /* The connection to be opened */ struct unixShmNode *pShmNode; /* The underlying mmapped file */ - int rc; /* Result code */ + int rc = SQLITE_OK; /* Result code */ unixInodeInfo *pInode; /* The inode of fd */ - char *zShmFilename; /* Name of the file used for SHM */ + char *zShm; /* Name of the file used for SHM */ int nShmFilename; /* Size of the SHM filename in bytes */ /* Allocate space for the new unixShm object. */ @@ -34065,14 +36120,14 @@ static int unixOpenSharedMemory(unixFile *pDbFd){ goto shm_open_err; } memset(pShmNode, 0, sizeof(*pShmNode)+nShmFilename); - zShmFilename = pShmNode->zFilename = (char*)&pShmNode[1]; + zShm = pShmNode->zFilename = (char*)&pShmNode[1]; #ifdef SQLITE_SHM_DIRECTORY - sqlite3_snprintf(nShmFilename, zShmFilename, + sqlite3_snprintf(nShmFilename, zShm, SQLITE_SHM_DIRECTORY "/sqlite-shm-%x-%x", (u32)sStat.st_ino, (u32)sStat.st_dev); #else - sqlite3_snprintf(nShmFilename, zShmFilename, "%s-shm", zBasePath); - sqlite3FileSuffix3(pDbFd->zPath, zShmFilename); + sqlite3_snprintf(nShmFilename, zShm, "%s-shm", zBasePath); + sqlite3FileSuffix3(pDbFd->zPath, zShm); #endif pShmNode->h = -1; pDbFd->pInode->pShmNode = pShmNode; @@ -34086,15 +36141,16 @@ static int unixOpenSharedMemory(unixFile *pDbFd){ } if( pInode->bProcessLock==0 ){ - int openFlags = O_RDWR | O_CREAT; - if( sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){ - openFlags = O_RDONLY; - pShmNode->isReadonly = 1; + if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){ + pShmNode->h = robust_open(zShm, O_RDWR|O_CREAT, (sStat.st_mode&0777)); } - pShmNode->h = robust_open(zShmFilename, openFlags, (sStat.st_mode&0777)); if( pShmNode->h<0 ){ - rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShmFilename); - goto shm_open_err; + pShmNode->h = robust_open(zShm, O_RDONLY, (sStat.st_mode&0777)); + if( pShmNode->h<0 ){ + rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zShm); + goto shm_open_err; + } + pShmNode->isReadonly = 1; } /* If this process is running as root, make sure that the SHM file @@ -34102,20 +36158,9 @@ static int unixOpenSharedMemory(unixFile *pDbFd){ ** the original owner will not be able to connect. */ robustFchown(pShmNode->h, sStat.st_uid, sStat.st_gid); - - /* Check to see if another process is holding the dead-man switch. - ** If not, truncate the file to zero length. - */ - rc = SQLITE_OK; - if( unixShmSystemLock(pDbFd, F_WRLCK, UNIX_SHM_DMS, 1)==SQLITE_OK ){ - if( robust_ftruncate(pShmNode->h, 0) ){ - rc = unixLogError(SQLITE_IOERR_SHMOPEN, "ftruncate", zShmFilename); - } - } - if( rc==SQLITE_OK ){ - rc = unixShmSystemLock(pDbFd, F_RDLCK, UNIX_SHM_DMS, 1); - } - if( rc ) goto shm_open_err; + + rc = unixLockSharedMemory(pDbFd, pShmNode); + if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err; } } @@ -34139,7 +36184,7 @@ static int unixOpenSharedMemory(unixFile *pDbFd){ p->pNext = pShmNode->pFirst; pShmNode->pFirst = p; sqlite3_mutex_leave(pShmNode->mutex); - return SQLITE_OK; + return rc; /* Jump here on any error */ shm_open_err: @@ -34191,6 +36236,11 @@ static int unixShmMap( p = pDbFd->pShm; pShmNode = p->pShmNode; sqlite3_mutex_enter(pShmNode->mutex); + if( pShmNode->isUnlocked ){ + rc = unixLockSharedMemory(pDbFd, pShmNode); + if( rc!=SQLITE_OK ) goto shmpage_out; + pShmNode->isUnlocked = 0; + } assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 ); assert( pShmNode->pInode==pDbFd->pInode ); assert( pShmNode->h>=0 || pDbFd->pInode->bProcessLock==1 ); @@ -35018,17 +37068,6 @@ static int fillInUnixFile( assert( pNew->pInode==NULL ); - /* Usually the path zFilename should not be a relative pathname. The - ** exception is when opening the proxy "conch" file in builds that - ** include the special Apple locking styles. - */ -#if defined(__APPLE__) && SQLITE_ENABLE_LOCKING_STYLE - assert( zFilename==0 || zFilename[0]=='/' - || pVfs->pAppData==(void*)&autolockIoFinder ); -#else - assert( zFilename==0 || zFilename[0]=='/' ); -#endif - /* No locking occurs in temporary files */ assert( zFilename!=0 || (ctrlFlags & UNIXFILE_NOLOCK)!=0 ); @@ -35287,6 +37326,8 @@ static UnixUnusedFd *findReusableFd(const char *zPath, int flags){ #if !OS_VXWORKS struct stat sStat; /* Results of stat() call */ + unixEnterMutex(); + /* A stat() call may fail for various reasons. If this happens, it is ** almost certain that an open() call on the same path will also fail. ** For this reason, if an error occurs in the stat() call here, it is @@ -35295,10 +37336,9 @@ static UnixUnusedFd *findReusableFd(const char *zPath, int flags){ ** ** Even if a subsequent open() call does succeed, the consequences of ** not searching for a reusable file descriptor are not dire. */ - if( 0==osStat(zPath, &sStat) ){ + if( nUnusedFd>0 && 0==osStat(zPath, &sStat) ){ unixInodeInfo *pInode; - unixEnterMutex(); pInode = inodeList; while( pInode && (pInode->fileId.dev!=sStat.st_dev || pInode->fileId.ino!=(u64)sStat.st_ino) ){ @@ -35309,11 +37349,12 @@ static UnixUnusedFd *findReusableFd(const char *zPath, int flags){ for(pp=&pInode->pUnused; *pp && (*pp)->flags!=flags; pp=&((*pp)->pNext)); pUnused = *pp; if( pUnused ){ + nUnusedFd--; *pp = pUnused->pNext; } } - unixLeaveMutex(); } + unixLeaveMutex(); #endif /* if !OS_VXWORKS */ return pUnused; } @@ -35389,16 +37430,11 @@ static int findCreateFileMode( */ nDb = sqlite3Strlen30(zPath) - 1; while( zPath[nDb]!='-' ){ -#ifndef SQLITE_ENABLE_8_3_NAMES - /* In the normal case (8+3 filenames disabled) the journal filename - ** is guaranteed to contain a '-' character. */ - assert( nDb>0 ); - assert( sqlite3Isalnum(zPath[nDb]) ); -#else - /* If 8+3 names are possible, then the journal file might not contain - ** a '-' character. So check for that case and return early. */ + /* In normal operation, the journal file name will always contain + ** a '-' character. However in 8+3 filename mode, or if a corrupt + ** rollback journal specifies a master journal with a goofy name, then + ** the '-' might be missing. */ if( nDb==0 || zPath[nDb]=='.' ) return SQLITE_OK; -#endif nDb--; } memcpy(zDb, zPath, nDb); @@ -35473,7 +37509,7 @@ static int unixOpen( ** a file-descriptor on the directory too. The first time unixSync() ** is called the directory file descriptor will be fsync()ed and close()d. */ - int syncDir = (isCreate && ( + int isNewJrnl = (isCreate && ( eType==SQLITE_OPEN_MASTER_JOURNAL || eType==SQLITE_OPEN_MAIN_JOURNAL || eType==SQLITE_OPEN_WAL @@ -35520,7 +37556,6 @@ static int unixOpen( randomnessPid = osGetpid(0); sqlite3_randomness(0,0); } - memset(p, 0, sizeof(unixFile)); if( eType==SQLITE_OPEN_MAIN_DB ){ @@ -35534,7 +37569,7 @@ static int unixOpen( return SQLITE_NOMEM_BKPT; } } - p->pUnused = pUnused; + p->pPreallocatedUnused = pUnused; /* Database filenames are double-zero terminated if they are not ** URIs with parameters. Hence, they can always be passed into @@ -35543,7 +37578,7 @@ static int unixOpen( }else if( !zName ){ /* If zName is NULL, the upper layer is requesting a temp file. */ - assert(isDelete && !syncDir); + assert(isDelete && !isNewJrnl); rc = unixGetTempname(pVfs->mxPathname, zTmpname); if( rc!=SQLITE_OK ){ return rc; @@ -35571,24 +37606,31 @@ static int unixOpen( gid_t gid; /* Groupid for the file */ rc = findCreateFileMode(zName, flags, &openMode, &uid, &gid); if( rc!=SQLITE_OK ){ - assert( !p->pUnused ); + assert( !p->pPreallocatedUnused ); assert( eType==SQLITE_OPEN_WAL || eType==SQLITE_OPEN_MAIN_JOURNAL ); return rc; } fd = robust_open(zName, openFlags, openMode); OSTRACE(("OPENX %-3d %s 0%o\n", fd, zName, openFlags)); assert( !isExclusive || (openFlags & O_CREAT)!=0 ); - if( fd<0 && errno!=EISDIR && isReadWrite ){ - /* Failed to open the file for read/write access. Try read-only. */ - flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE); - openFlags &= ~(O_RDWR|O_CREAT); - flags |= SQLITE_OPEN_READONLY; - openFlags |= O_RDONLY; - isReadonly = 1; - fd = robust_open(zName, openFlags, openMode); + if( fd<0 ){ + if( isNewJrnl && errno==EACCES && osAccess(zName, F_OK) ){ + /* If unable to create a journal because the directory is not + ** writable, change the error code to indicate that. */ + rc = SQLITE_READONLY_DIRECTORY; + }else if( errno!=EISDIR && isReadWrite ){ + /* Failed to open the file for read/write access. Try read-only. */ + flags &= ~(SQLITE_OPEN_READWRITE|SQLITE_OPEN_CREATE); + openFlags &= ~(O_RDWR|O_CREAT); + flags |= SQLITE_OPEN_READONLY; + openFlags |= O_RDONLY; + isReadonly = 1; + fd = robust_open(zName, openFlags, openMode); + } } if( fd<0 ){ - rc = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName); + int rc2 = unixLogError(SQLITE_CANTOPEN_BKPT, "open", zName); + if( rc==SQLITE_OK ) rc = rc2; goto open_finished; } @@ -35605,9 +37647,9 @@ static int unixOpen( *pOutFlags = flags; } - if( p->pUnused ){ - p->pUnused->fd = fd; - p->pUnused->flags = flags; + if( p->pPreallocatedUnused ){ + p->pPreallocatedUnused->fd = fd; + p->pPreallocatedUnused->flags = flags; } if( isDelete ){ @@ -35648,7 +37690,7 @@ static int unixOpen( if( isReadonly ) ctrlFlags |= UNIXFILE_RDONLY; noLock = eType!=SQLITE_OPEN_MAIN_DB; if( noLock ) ctrlFlags |= UNIXFILE_NOLOCK; - if( syncDir ) ctrlFlags |= UNIXFILE_DIRSYNC; + if( isNewJrnl ) ctrlFlags |= UNIXFILE_DIRSYNC; if( flags & SQLITE_OPEN_URI ) ctrlFlags |= UNIXFILE_URI; #if SQLITE_ENABLE_LOCKING_STYLE @@ -35684,11 +37726,14 @@ static int unixOpen( } #endif + assert( zPath==0 || zPath[0]=='/' + || eType==SQLITE_OPEN_MASTER_JOURNAL || eType==SQLITE_OPEN_MAIN_JOURNAL + ); rc = fillInUnixFile(pVfs, fd, pFile, zPath, ctrlFlags); open_finished: if( rc!=SQLITE_OK ){ - sqlite3_free(p->pUnused); + sqlite3_free(p->pPreallocatedUnused); } return rc; } @@ -36429,7 +38474,7 @@ static int proxyCreateUnixFile( dummyVfs.zName = "dummy"; pUnused->fd = fd; pUnused->flags = openFlags; - pNew->pUnused = pUnused; + pNew->pPreallocatedUnused = pUnused; rc = fillInUnixFile(&dummyVfs, fd, (sqlite3_file*)pNew, path, 0); if( rc==SQLITE_OK ){ @@ -37379,12 +39424,13 @@ SQLITE_API int sqlite3_os_init(void){ /* Double-check that the aSyscall[] array has been constructed ** correctly. See ticket [bb3a86e890c8e96ab] */ - assert( ArraySize(aSyscall)==28 ); + assert( ArraySize(aSyscall)==29 ); /* Register all VFSes defined in the aVfs[] array */ for(i=0; i<(sizeof(aVfs)/sizeof(sqlite3_vfs)); i++){ sqlite3_vfs_register(&aVfs[i], i==0); } + unixBigLock = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1); return SQLITE_OK; } @@ -37396,6 +39442,7 @@ SQLITE_API int sqlite3_os_init(void){ ** This routine is a no-op for unix. */ SQLITE_API int sqlite3_os_end(void){ + unixBigLock = 0; return SQLITE_OK; } @@ -37919,22 +39966,6 @@ struct winVfsAppData { #endif /* - * The value used with sqlite3_win32_set_directory() to specify that - * the data directory should be changed. - */ -#ifndef SQLITE_WIN32_DATA_DIRECTORY_TYPE -# define SQLITE_WIN32_DATA_DIRECTORY_TYPE (1) -#endif - -/* - * The value used with sqlite3_win32_set_directory() to specify that - * the temporary directory should be changed. - */ -#ifndef SQLITE_WIN32_TEMP_DIRECTORY_TYPE -# define SQLITE_WIN32_TEMP_DIRECTORY_TYPE (2) -#endif - -/* * If compiled with SQLITE_WIN32_MALLOC on Windows, we will use the * various Win32 API heap functions instead of our own. */ @@ -37955,7 +39986,34 @@ struct winVfsAppData { ****************************************************************************** */ #ifndef SQLITE_WIN32_HEAP_CREATE -# define SQLITE_WIN32_HEAP_CREATE (TRUE) +# define SQLITE_WIN32_HEAP_CREATE (TRUE) +#endif + +/* + * This is the maximum possible initial size of the Win32-specific heap, in + * bytes. + */ +#ifndef SQLITE_WIN32_HEAP_MAX_INIT_SIZE +# define SQLITE_WIN32_HEAP_MAX_INIT_SIZE (4294967295U) +#endif + +/* + * This is the extra space for the initial size of the Win32-specific heap, + * in bytes. This value may be zero. + */ +#ifndef SQLITE_WIN32_HEAP_INIT_EXTRA +# define SQLITE_WIN32_HEAP_INIT_EXTRA (4194304) +#endif + +/* + * Calculate the maximum legal cache size, in pages, based on the maximum + * possible initial heap size and the default page size, setting aside the + * needed extra space. + */ +#ifndef SQLITE_WIN32_MAX_CACHE_SIZE +# define SQLITE_WIN32_MAX_CACHE_SIZE (((SQLITE_WIN32_HEAP_MAX_INIT_SIZE) - \ + (SQLITE_WIN32_HEAP_INIT_EXTRA)) / \ + (SQLITE_DEFAULT_PAGE_SIZE)) #endif /* @@ -37964,25 +40022,36 @@ struct winVfsAppData { */ #ifndef SQLITE_WIN32_CACHE_SIZE # if SQLITE_DEFAULT_CACHE_SIZE>=0 -# define SQLITE_WIN32_CACHE_SIZE (SQLITE_DEFAULT_CACHE_SIZE) +# define SQLITE_WIN32_CACHE_SIZE (SQLITE_DEFAULT_CACHE_SIZE) # else -# define SQLITE_WIN32_CACHE_SIZE (-(SQLITE_DEFAULT_CACHE_SIZE)) +# define SQLITE_WIN32_CACHE_SIZE (-(SQLITE_DEFAULT_CACHE_SIZE)) # endif #endif /* + * Make sure that the calculated cache size, in pages, cannot cause the + * initial size of the Win32-specific heap to exceed the maximum amount + * of memory that can be specified in the call to HeapCreate. + */ +#if SQLITE_WIN32_CACHE_SIZE>SQLITE_WIN32_MAX_CACHE_SIZE +# undef SQLITE_WIN32_CACHE_SIZE +# define SQLITE_WIN32_CACHE_SIZE (2000) +#endif + +/* * The initial size of the Win32-specific heap. This value may be zero. */ #ifndef SQLITE_WIN32_HEAP_INIT_SIZE -# define SQLITE_WIN32_HEAP_INIT_SIZE ((SQLITE_WIN32_CACHE_SIZE) * \ - (SQLITE_DEFAULT_PAGE_SIZE) + 4194304) +# define SQLITE_WIN32_HEAP_INIT_SIZE ((SQLITE_WIN32_CACHE_SIZE) * \ + (SQLITE_DEFAULT_PAGE_SIZE) + \ + (SQLITE_WIN32_HEAP_INIT_EXTRA)) #endif /* * The maximum size of the Win32-specific heap. This value may be zero. */ #ifndef SQLITE_WIN32_HEAP_MAX_SIZE -# define SQLITE_WIN32_HEAP_MAX_SIZE (0) +# define SQLITE_WIN32_HEAP_MAX_SIZE (0) #endif /* @@ -37990,7 +40059,7 @@ struct winVfsAppData { * zero for the default behavior. */ #ifndef SQLITE_WIN32_HEAP_FLAGS -# define SQLITE_WIN32_HEAP_FLAGS (0) +# define SQLITE_WIN32_HEAP_FLAGS (0) #endif @@ -39492,13 +41561,13 @@ SQLITE_API char *sqlite3_win32_utf8_to_mbcs_v2(const char *zText, int useAnsi){ } /* -** This function sets the data directory or the temporary directory based on -** the provided arguments. The type argument must be 1 in order to set the -** data directory or 2 in order to set the temporary directory. The zValue -** argument is the name of the directory to use. The return value will be -** SQLITE_OK if successful. +** This function is the same as sqlite3_win32_set_directory (below); however, +** it accepts a UTF-8 string. */ -SQLITE_API int sqlite3_win32_set_directory(DWORD type, LPCWSTR zValue){ +SQLITE_API int sqlite3_win32_set_directory8( + unsigned long type, /* Identifier for directory being set or reset */ + const char *zValue /* New value for directory being set or reset */ +){ char **ppDirectory = 0; #ifndef SQLITE_OMIT_AUTOINIT int rc = sqlite3_initialize(); @@ -39514,21 +41583,54 @@ SQLITE_API int sqlite3_win32_set_directory(DWORD type, LPCWSTR zValue){ ); assert( !ppDirectory || sqlite3MemdebugHasType(*ppDirectory, MEMTYPE_HEAP) ); if( ppDirectory ){ - char *zValueUtf8 = 0; + char *zCopy = 0; if( zValue && zValue[0] ){ - zValueUtf8 = winUnicodeToUtf8(zValue); - if ( zValueUtf8==0 ){ + zCopy = sqlite3_mprintf("%s", zValue); + if ( zCopy==0 ){ return SQLITE_NOMEM_BKPT; } } sqlite3_free(*ppDirectory); - *ppDirectory = zValueUtf8; + *ppDirectory = zCopy; return SQLITE_OK; } return SQLITE_ERROR; } /* +** This function is the same as sqlite3_win32_set_directory (below); however, +** it accepts a UTF-16 string. +*/ +SQLITE_API int sqlite3_win32_set_directory16( + unsigned long type, /* Identifier for directory being set or reset */ + const void *zValue /* New value for directory being set or reset */ +){ + int rc; + char *zUtf8 = 0; + if( zValue ){ + zUtf8 = sqlite3_win32_unicode_to_utf8(zValue); + if( zUtf8==0 ) return SQLITE_NOMEM_BKPT; + } + rc = sqlite3_win32_set_directory8(type, zUtf8); + if( zUtf8 ) sqlite3_free(zUtf8); + return rc; +} + +/* +** This function sets the data directory or the temporary directory based on +** the provided arguments. The type argument must be 1 in order to set the +** data directory or 2 in order to set the temporary directory. The zValue +** argument is the name of the directory to use. The return value will be +** SQLITE_OK if successful. +*/ +SQLITE_API int sqlite3_win32_set_directory( + unsigned long type, /* Identifier for directory being set or reset */ + void *zValue /* New value for directory being set or reset */ +){ + return sqlite3_win32_set_directory16(type, zValue); +} + +/* ** The return value of winGetLastErrorMsg ** is zero if the error message fits in the buffer, or non-zero ** otherwise (if the message was truncated). @@ -41124,6 +43226,14 @@ static int winFileControl(sqlite3_file *id, int op, void *pArg){ if( newLimit>sqlite3GlobalConfig.mxMmap ){ newLimit = sqlite3GlobalConfig.mxMmap; } + + /* The value of newLimit may be eventually cast to (SIZE_T) and passed + ** to MapViewOfFile(). Restrict its value to 2GB if (SIZE_T) is not at + ** least a 64-bit type. */ + if( newLimit>0 && sizeof(SIZE_T)<8 ){ + newLimit = (newLimit & 0x7FFFFFFF); + } + *(i64*)pArg = pFile->mmapSizeMax; if( newLimit>=0 && newLimit!=pFile->mmapSizeMax && pFile->nFetchOut==0 ){ pFile->mmapSizeMax = newLimit; @@ -41188,15 +43298,16 @@ static SYSTEM_INFO winSysInfo; ** assert( winShmMutexHeld() ); ** winShmLeaveMutex() */ +static sqlite3_mutex *winBigLock = 0; static void winShmEnterMutex(void){ - sqlite3_mutex_enter(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + sqlite3_mutex_enter(winBigLock); } static void winShmLeaveMutex(void){ - sqlite3_mutex_leave(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + sqlite3_mutex_leave(winBigLock); } #ifndef NDEBUG static int winShmMutexHeld(void) { - return sqlite3_mutex_held(sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1)); + return sqlite3_mutex_held(winBigLock); } #endif @@ -41230,6 +43341,9 @@ struct winShmNode { int szRegion; /* Size of shared-memory regions */ int nRegion; /* Size of array apRegion */ + u8 isReadonly; /* True if read-only */ + u8 isUnlocked; /* True if no DMS lock held */ + struct ShmRegion { HANDLE hMap; /* File handle from CreateFileMapping */ void *pMap; @@ -41296,7 +43410,7 @@ static int winShmSystemLock( int rc = 0; /* Result code form Lock/UnlockFileEx() */ /* Access to the winShmNode object is serialized by the caller */ - assert( sqlite3_mutex_held(pFile->mutex) || pFile->nRef==0 ); + assert( pFile->nRef==0 || sqlite3_mutex_held(pFile->mutex) ); OSTRACE(("SHM-LOCK file=%p, lock=%d, offset=%d, size=%d\n", pFile->hFile.h, lockType, ofst, nByte)); @@ -41378,6 +43492,37 @@ static void winShmPurge(sqlite3_vfs *pVfs, int deleteFlag){ } /* +** The DMS lock has not yet been taken on shm file pShmNode. Attempt to +** take it now. Return SQLITE_OK if successful, or an SQLite error +** code otherwise. +** +** If the DMS cannot be locked because this is a readonly_shm=1 +** connection and no other process already holds a lock, return +** SQLITE_READONLY_CANTINIT and set pShmNode->isUnlocked=1. +*/ +static int winLockSharedMemory(winShmNode *pShmNode){ + int rc = winShmSystemLock(pShmNode, WINSHM_WRLCK, WIN_SHM_DMS, 1); + + if( rc==SQLITE_OK ){ + if( pShmNode->isReadonly ){ + pShmNode->isUnlocked = 1; + winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); + return SQLITE_READONLY_CANTINIT; + }else if( winTruncate((sqlite3_file*)&pShmNode->hFile, 0) ){ + winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); + return winLogError(SQLITE_IOERR_SHMOPEN, osGetLastError(), + "winLockSharedMemory", pShmNode->zFilename); + } + } + + if( rc==SQLITE_OK ){ + winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); + } + + return winShmSystemLock(pShmNode, WINSHM_RDLCK, WIN_SHM_DMS, 1); +} + +/* ** Open the shared-memory area associated with database file pDbFd. ** ** When opening a new shared-memory file, if no other instances of that @@ -41386,9 +43531,9 @@ static void winShmPurge(sqlite3_vfs *pVfs, int deleteFlag){ */ static int winOpenSharedMemory(winFile *pDbFd){ struct winShm *p; /* The connection to be opened */ - struct winShmNode *pShmNode = 0; /* The underlying mmapped file */ - int rc; /* Result code */ - struct winShmNode *pNew; /* Newly allocated winShmNode */ + winShmNode *pShmNode = 0; /* The underlying mmapped file */ + int rc = SQLITE_OK; /* Result code */ + winShmNode *pNew; /* Newly allocated winShmNode */ int nName; /* Size of zName in bytes */ assert( pDbFd->pShm==0 ); /* Not previously opened */ @@ -41421,6 +43566,9 @@ static int winOpenSharedMemory(winFile *pDbFd){ if( pShmNode ){ sqlite3_free(pNew); }else{ + int inFlags = SQLITE_OPEN_WAL; + int outFlags = 0; + pShmNode = pNew; pNew = 0; ((winFile*)(&pShmNode->hFile))->h = INVALID_HANDLE_VALUE; @@ -41435,30 +43583,23 @@ static int winOpenSharedMemory(winFile *pDbFd){ } } - rc = winOpen(pDbFd->pVfs, - pShmNode->zFilename, /* Name of the file (UTF-8) */ - (sqlite3_file*)&pShmNode->hFile, /* File handle here */ - SQLITE_OPEN_WAL | SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE, - 0); - if( SQLITE_OK!=rc ){ + if( 0==sqlite3_uri_boolean(pDbFd->zPath, "readonly_shm", 0) ){ + inFlags |= SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE; + }else{ + inFlags |= SQLITE_OPEN_READONLY; + } + rc = winOpen(pDbFd->pVfs, pShmNode->zFilename, + (sqlite3_file*)&pShmNode->hFile, + inFlags, &outFlags); + if( rc!=SQLITE_OK ){ + rc = winLogError(rc, osGetLastError(), "winOpenShm", + pShmNode->zFilename); goto shm_open_err; } + if( outFlags==SQLITE_OPEN_READONLY ) pShmNode->isReadonly = 1; - /* Check to see if another process is holding the dead-man switch. - ** If not, truncate the file to zero length. - */ - if( winShmSystemLock(pShmNode, WINSHM_WRLCK, WIN_SHM_DMS, 1)==SQLITE_OK ){ - rc = winTruncate((sqlite3_file *)&pShmNode->hFile, 0); - if( rc!=SQLITE_OK ){ - rc = winLogError(SQLITE_IOERR_SHMOPEN, osGetLastError(), - "winOpenShm", pDbFd->zPath); - } - } - if( rc==SQLITE_OK ){ - winShmSystemLock(pShmNode, WINSHM_UNLCK, WIN_SHM_DMS, 1); - rc = winShmSystemLock(pShmNode, WINSHM_RDLCK, WIN_SHM_DMS, 1); - } - if( rc ) goto shm_open_err; + rc = winLockSharedMemory(pShmNode); + if( rc!=SQLITE_OK && rc!=SQLITE_READONLY_CANTINIT ) goto shm_open_err; } /* Make the new connection a child of the winShmNode */ @@ -41481,7 +43622,7 @@ static int winOpenSharedMemory(winFile *pDbFd){ p->pNext = pShmNode->pFirst; pShmNode->pFirst = p; sqlite3_mutex_leave(pShmNode->mutex); - return SQLITE_OK; + return rc; /* Jump here on any error */ shm_open_err: @@ -41685,6 +43826,8 @@ static int winShmMap( winFile *pDbFd = (winFile*)fd; winShm *pShm = pDbFd->pShm; winShmNode *pShmNode; + DWORD protect = PAGE_READWRITE; + DWORD flags = FILE_MAP_WRITE | FILE_MAP_READ; int rc = SQLITE_OK; if( !pShm ){ @@ -41695,6 +43838,11 @@ static int winShmMap( pShmNode = pShm->pShmNode; sqlite3_mutex_enter(pShmNode->mutex); + if( pShmNode->isUnlocked ){ + rc = winLockSharedMemory(pShmNode); + if( rc!=SQLITE_OK ) goto shmpage_out; + pShmNode->isUnlocked = 0; + } assert( szRegion==pShmNode->szRegion || pShmNode->nRegion==0 ); if( pShmNode->nRegion<=iRegion ){ @@ -41741,21 +43889,26 @@ static int winShmMap( } pShmNode->aRegion = apNew; + if( pShmNode->isReadonly ){ + protect = PAGE_READONLY; + flags = FILE_MAP_READ; + } + while( pShmNode->nRegion<=iRegion ){ HANDLE hMap = NULL; /* file-mapping handle */ void *pMap = 0; /* Mapped memory region */ #if SQLITE_OS_WINRT hMap = osCreateFileMappingFromApp(pShmNode->hFile.h, - NULL, PAGE_READWRITE, nByte, NULL + NULL, protect, nByte, NULL ); #elif defined(SQLITE_WIN32_HAS_WIDE) hMap = osCreateFileMappingW(pShmNode->hFile.h, - NULL, PAGE_READWRITE, 0, nByte, NULL + NULL, protect, 0, nByte, NULL ); #elif defined(SQLITE_WIN32_HAS_ANSI) && SQLITE_WIN32_CREATEFILEMAPPINGA hMap = osCreateFileMappingA(pShmNode->hFile.h, - NULL, PAGE_READWRITE, 0, nByte, NULL + NULL, protect, 0, nByte, NULL ); #endif OSTRACE(("SHM-MAP-CREATE pid=%lu, region=%d, size=%d, rc=%s\n", @@ -41765,11 +43918,11 @@ static int winShmMap( int iOffset = pShmNode->nRegion*szRegion; int iOffsetShift = iOffset % winSysInfo.dwAllocationGranularity; #if SQLITE_OS_WINRT - pMap = osMapViewOfFileFromApp(hMap, FILE_MAP_WRITE | FILE_MAP_READ, + pMap = osMapViewOfFileFromApp(hMap, flags, iOffset - iOffsetShift, szRegion + iOffsetShift ); #else - pMap = osMapViewOfFile(hMap, FILE_MAP_WRITE | FILE_MAP_READ, + pMap = osMapViewOfFile(hMap, flags, 0, iOffset - iOffsetShift, szRegion + iOffsetShift ); #endif @@ -41800,6 +43953,7 @@ shmpage_out: }else{ *pp = 0; } + if( pShmNode->isReadonly && rc==SQLITE_OK ) rc = SQLITE_READONLY; sqlite3_mutex_leave(pShmNode->mutex); return rc; } @@ -42436,6 +44590,14 @@ static int winIsDir(const void *zConverted){ return (attr!=INVALID_FILE_ATTRIBUTES) && (attr&FILE_ATTRIBUTE_DIRECTORY); } +/* forward reference */ +static int winAccess( + sqlite3_vfs *pVfs, /* Not used on win32 */ + const char *zFilename, /* Name of file to check */ + int flags, /* Type of test to make on this file */ + int *pResOut /* OUT: Result */ +); + /* ** Open a file. */ @@ -42612,37 +44774,58 @@ static int winOpen( extendedParameters.dwSecurityQosFlags = SECURITY_ANONYMOUS; extendedParameters.lpSecurityAttributes = NULL; extendedParameters.hTemplateFile = NULL; - while( (h = osCreateFile2((LPCWSTR)zConverted, - dwDesiredAccess, - dwShareMode, - dwCreationDisposition, - &extendedParameters))==INVALID_HANDLE_VALUE && - winRetryIoerr(&cnt, &lastErrno) ){ - /* Noop */ - } + do{ + h = osCreateFile2((LPCWSTR)zConverted, + dwDesiredAccess, + dwShareMode, + dwCreationDisposition, + &extendedParameters); + if( h!=INVALID_HANDLE_VALUE ) break; + if( isReadWrite ){ + int rc2, isRO = 0; + sqlite3BeginBenignMalloc(); + rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO); + sqlite3EndBenignMalloc(); + if( rc2==SQLITE_OK && isRO ) break; + } + }while( winRetryIoerr(&cnt, &lastErrno) ); #else - while( (h = osCreateFileW((LPCWSTR)zConverted, - dwDesiredAccess, - dwShareMode, NULL, - dwCreationDisposition, - dwFlagsAndAttributes, - NULL))==INVALID_HANDLE_VALUE && - winRetryIoerr(&cnt, &lastErrno) ){ - /* Noop */ - } + do{ + h = osCreateFileW((LPCWSTR)zConverted, + dwDesiredAccess, + dwShareMode, NULL, + dwCreationDisposition, + dwFlagsAndAttributes, + NULL); + if( h!=INVALID_HANDLE_VALUE ) break; + if( isReadWrite ){ + int rc2, isRO = 0; + sqlite3BeginBenignMalloc(); + rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO); + sqlite3EndBenignMalloc(); + if( rc2==SQLITE_OK && isRO ) break; + } + }while( winRetryIoerr(&cnt, &lastErrno) ); #endif } #ifdef SQLITE_WIN32_HAS_ANSI else{ - while( (h = osCreateFileA((LPCSTR)zConverted, - dwDesiredAccess, - dwShareMode, NULL, - dwCreationDisposition, - dwFlagsAndAttributes, - NULL))==INVALID_HANDLE_VALUE && - winRetryIoerr(&cnt, &lastErrno) ){ - /* Noop */ - } + do{ + h = osCreateFileA((LPCSTR)zConverted, + dwDesiredAccess, + dwShareMode, NULL, + dwCreationDisposition, + dwFlagsAndAttributes, + NULL); + if( h!=INVALID_HANDLE_VALUE ) break; + if( isReadWrite ){ + int rc2, isRO = 0; + sqlite3BeginBenignMalloc(); + rc2 = winAccess(pVfs, zName, SQLITE_ACCESS_READ, &isRO); + sqlite3EndBenignMalloc(); + if( rc2==SQLITE_OK && isRO ) break; + } + }while( winRetryIoerr(&cnt, &lastErrno) ); } #endif winLogIoerr(cnt, __LINE__); @@ -42651,8 +44834,6 @@ static int winOpen( dwDesiredAccess, (h==INVALID_HANDLE_VALUE) ? "failed" : "ok")); if( h==INVALID_HANDLE_VALUE ){ - pFile->lastErrno = lastErrno; - winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name); sqlite3_free(zConverted); sqlite3_free(zTmpname); if( isReadWrite && !isExclusive ){ @@ -42661,6 +44842,8 @@ static int winOpen( ~(SQLITE_OPEN_CREATE|SQLITE_OPEN_READWRITE)), pOutFlags); }else{ + pFile->lastErrno = lastErrno; + winLogError(SQLITE_CANTOPEN, pFile->lastErrno, "winOpen", zUtf8Name); return SQLITE_CANTOPEN_BKPT; } } @@ -43253,9 +45436,6 @@ static int winRandomness(sqlite3_vfs *pVfs, int nBuf, char *zBuf){ EntropyGatherer e; UNUSED_PARAMETER(pVfs); memset(zBuf, 0, nBuf); -#if defined(_MSC_VER) && _MSC_VER>=1400 && !SQLITE_OS_WINCE - rand_s((unsigned int*)zBuf); /* rand_s() is not available with MinGW */ -#endif /* defined(_MSC_VER) && _MSC_VER>=1400 */ e.a = (unsigned char*)zBuf; e.na = nBuf; e.nXor = 0; @@ -43550,6 +45730,10 @@ SQLITE_API int sqlite3_os_init(void){ sqlite3_vfs_register(&winLongPathNolockVfs, 0); #endif +#ifndef SQLITE_OMIT_WAL + winBigLock = sqlite3MutexAlloc(SQLITE_MUTEX_STATIC_VFS1); +#endif + return SQLITE_OK; } @@ -43560,12 +45744,609 @@ SQLITE_API int sqlite3_os_end(void){ sleepObj = NULL; } #endif + +#ifndef SQLITE_OMIT_WAL + winBigLock = 0; +#endif + return SQLITE_OK; } #endif /* SQLITE_OS_WIN */ /************** End of os_win.c **********************************************/ +/************** Begin file memdb.c *******************************************/ +/* +** 2016-09-07 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file implements an in-memory VFS. A database is held as a contiguous +** block of memory. +** +** This file also implements interface sqlite3_serialize() and +** sqlite3_deserialize(). +*/ +#ifdef SQLITE_ENABLE_DESERIALIZE +/* #include "sqliteInt.h" */ + +/* +** Forward declaration of objects used by this utility +*/ +typedef struct sqlite3_vfs MemVfs; +typedef struct MemFile MemFile; + +/* Access to a lower-level VFS that (might) implement dynamic loading, +** access to randomness, etc. +*/ +#define ORIGVFS(p) ((sqlite3_vfs*)((p)->pAppData)) + +/* An open file */ +struct MemFile { + sqlite3_file base; /* IO methods */ + sqlite3_int64 sz; /* Size of the file */ + sqlite3_int64 szMax; /* Space allocated to aData */ + unsigned char *aData; /* content of the file */ + int nMmap; /* Number of memory mapped pages */ + unsigned mFlags; /* Flags */ + int eLock; /* Most recent lock against this file */ +}; + +/* +** Methods for MemFile +*/ +static int memdbClose(sqlite3_file*); +static int memdbRead(sqlite3_file*, void*, int iAmt, sqlite3_int64 iOfst); +static int memdbWrite(sqlite3_file*,const void*,int iAmt, sqlite3_int64 iOfst); +static int memdbTruncate(sqlite3_file*, sqlite3_int64 size); +static int memdbSync(sqlite3_file*, int flags); +static int memdbFileSize(sqlite3_file*, sqlite3_int64 *pSize); +static int memdbLock(sqlite3_file*, int); +/* static int memdbCheckReservedLock(sqlite3_file*, int *pResOut);// not used */ +static int memdbFileControl(sqlite3_file*, int op, void *pArg); +/* static int memdbSectorSize(sqlite3_file*); // not used */ +static int memdbDeviceCharacteristics(sqlite3_file*); +static int memdbFetch(sqlite3_file*, sqlite3_int64 iOfst, int iAmt, void **pp); +static int memdbUnfetch(sqlite3_file*, sqlite3_int64 iOfst, void *p); + +/* +** Methods for MemVfs +*/ +static int memdbOpen(sqlite3_vfs*, const char *, sqlite3_file*, int , int *); +/* static int memdbDelete(sqlite3_vfs*, const char *zName, int syncDir); */ +static int memdbAccess(sqlite3_vfs*, const char *zName, int flags, int *); +static int memdbFullPathname(sqlite3_vfs*, const char *zName, int, char *zOut); +static void *memdbDlOpen(sqlite3_vfs*, const char *zFilename); +static void memdbDlError(sqlite3_vfs*, int nByte, char *zErrMsg); +static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char*zSym))(void); +static void memdbDlClose(sqlite3_vfs*, void*); +static int memdbRandomness(sqlite3_vfs*, int nByte, char *zOut); +static int memdbSleep(sqlite3_vfs*, int microseconds); +/* static int memdbCurrentTime(sqlite3_vfs*, double*); */ +static int memdbGetLastError(sqlite3_vfs*, int, char *); +static int memdbCurrentTimeInt64(sqlite3_vfs*, sqlite3_int64*); + +static sqlite3_vfs memdb_vfs = { + 2, /* iVersion */ + 0, /* szOsFile (set when registered) */ + 1024, /* mxPathname */ + 0, /* pNext */ + "memdb", /* zName */ + 0, /* pAppData (set when registered) */ + memdbOpen, /* xOpen */ + 0, /* memdbDelete, */ /* xDelete */ + memdbAccess, /* xAccess */ + memdbFullPathname, /* xFullPathname */ + memdbDlOpen, /* xDlOpen */ + memdbDlError, /* xDlError */ + memdbDlSym, /* xDlSym */ + memdbDlClose, /* xDlClose */ + memdbRandomness, /* xRandomness */ + memdbSleep, /* xSleep */ + 0, /* memdbCurrentTime, */ /* xCurrentTime */ + memdbGetLastError, /* xGetLastError */ + memdbCurrentTimeInt64 /* xCurrentTimeInt64 */ +}; + +static const sqlite3_io_methods memdb_io_methods = { + 3, /* iVersion */ + memdbClose, /* xClose */ + memdbRead, /* xRead */ + memdbWrite, /* xWrite */ + memdbTruncate, /* xTruncate */ + memdbSync, /* xSync */ + memdbFileSize, /* xFileSize */ + memdbLock, /* xLock */ + memdbLock, /* xUnlock - same as xLock in this case */ + 0, /* memdbCheckReservedLock, */ /* xCheckReservedLock */ + memdbFileControl, /* xFileControl */ + 0, /* memdbSectorSize,*/ /* xSectorSize */ + memdbDeviceCharacteristics, /* xDeviceCharacteristics */ + 0, /* xShmMap */ + 0, /* xShmLock */ + 0, /* xShmBarrier */ + 0, /* xShmUnmap */ + memdbFetch, /* xFetch */ + memdbUnfetch /* xUnfetch */ +}; + + + +/* +** Close an memdb-file. +** +** The pData pointer is owned by the application, so there is nothing +** to free. +*/ +static int memdbClose(sqlite3_file *pFile){ + MemFile *p = (MemFile *)pFile; + if( p->mFlags & SQLITE_DESERIALIZE_FREEONCLOSE ) sqlite3_free(p->aData); + return SQLITE_OK; +} + +/* +** Read data from an memdb-file. +*/ +static int memdbRead( + sqlite3_file *pFile, + void *zBuf, + int iAmt, + sqlite_int64 iOfst +){ + MemFile *p = (MemFile *)pFile; + if( iOfst+iAmt>p->sz ){ + memset(zBuf, 0, iAmt); + if( iOfst<p->sz ) memcpy(zBuf, p->aData+iOfst, p->sz - iOfst); + return SQLITE_IOERR_SHORT_READ; + } + memcpy(zBuf, p->aData+iOfst, iAmt); + return SQLITE_OK; +} + +/* +** Try to enlarge the memory allocation to hold at least sz bytes +*/ +static int memdbEnlarge(MemFile *p, sqlite3_int64 newSz){ + unsigned char *pNew; + if( (p->mFlags & SQLITE_DESERIALIZE_RESIZEABLE)==0 || p->nMmap>0 ){ + return SQLITE_FULL; + } + pNew = sqlite3_realloc64(p->aData, newSz); + if( pNew==0 ) return SQLITE_NOMEM; + p->aData = pNew; + p->szMax = newSz; + return SQLITE_OK; +} + +/* +** Write data to an memdb-file. +*/ +static int memdbWrite( + sqlite3_file *pFile, + const void *z, + int iAmt, + sqlite_int64 iOfst +){ + MemFile *p = (MemFile *)pFile; + if( iOfst+iAmt>p->sz ){ + int rc; + if( iOfst+iAmt>p->szMax + && (rc = memdbEnlarge(p, (iOfst+iAmt)*2))!=SQLITE_OK + ){ + return rc; + } + if( iOfst>p->sz ) memset(p->aData+p->sz, 0, iOfst-p->sz); + p->sz = iOfst+iAmt; + } + memcpy(p->aData+iOfst, z, iAmt); + return SQLITE_OK; +} + +/* +** Truncate an memdb-file. +** +** In rollback mode (which is always the case for memdb, as it does not +** support WAL mode) the truncate() method is only used to reduce +** the size of a file, never to increase the size. +*/ +static int memdbTruncate(sqlite3_file *pFile, sqlite_int64 size){ + MemFile *p = (MemFile *)pFile; + if( NEVER(size>p->sz) ) return SQLITE_FULL; + p->sz = size; + return SQLITE_OK; +} + +/* +** Sync an memdb-file. +*/ +static int memdbSync(sqlite3_file *pFile, int flags){ + return SQLITE_OK; +} + +/* +** Return the current file-size of an memdb-file. +*/ +static int memdbFileSize(sqlite3_file *pFile, sqlite_int64 *pSize){ + MemFile *p = (MemFile *)pFile; + *pSize = p->sz; + return SQLITE_OK; +} + +/* +** Lock an memdb-file. +*/ +static int memdbLock(sqlite3_file *pFile, int eLock){ + MemFile *p = (MemFile *)pFile; + p->eLock = eLock; + return SQLITE_OK; +} + +#if 0 /* Never used because memdbAccess() always returns false */ +/* +** Check if another file-handle holds a RESERVED lock on an memdb-file. +*/ +static int memdbCheckReservedLock(sqlite3_file *pFile, int *pResOut){ + *pResOut = 0; + return SQLITE_OK; +} +#endif + +/* +** File control method. For custom operations on an memdb-file. +*/ +static int memdbFileControl(sqlite3_file *pFile, int op, void *pArg){ + MemFile *p = (MemFile *)pFile; + int rc = SQLITE_NOTFOUND; + if( op==SQLITE_FCNTL_VFSNAME ){ + *(char**)pArg = sqlite3_mprintf("memdb(%p,%lld)", p->aData, p->sz); + rc = SQLITE_OK; + } + return rc; +} + +#if 0 /* Not used because of SQLITE_IOCAP_POWERSAFE_OVERWRITE */ +/* +** Return the sector-size in bytes for an memdb-file. +*/ +static int memdbSectorSize(sqlite3_file *pFile){ + return 1024; +} +#endif + +/* +** Return the device characteristic flags supported by an memdb-file. +*/ +static int memdbDeviceCharacteristics(sqlite3_file *pFile){ + return SQLITE_IOCAP_ATOMIC | + SQLITE_IOCAP_POWERSAFE_OVERWRITE | + SQLITE_IOCAP_SAFE_APPEND | + SQLITE_IOCAP_SEQUENTIAL; +} + +/* Fetch a page of a memory-mapped file */ +static int memdbFetch( + sqlite3_file *pFile, + sqlite3_int64 iOfst, + int iAmt, + void **pp +){ + MemFile *p = (MemFile *)pFile; + p->nMmap++; + *pp = (void*)(p->aData + iOfst); + return SQLITE_OK; +} + +/* Release a memory-mapped page */ +static int memdbUnfetch(sqlite3_file *pFile, sqlite3_int64 iOfst, void *pPage){ + MemFile *p = (MemFile *)pFile; + p->nMmap--; + return SQLITE_OK; +} + +/* +** Open an mem file handle. +*/ +static int memdbOpen( + sqlite3_vfs *pVfs, + const char *zName, + sqlite3_file *pFile, + int flags, + int *pOutFlags +){ + MemFile *p = (MemFile*)pFile; + if( (flags & SQLITE_OPEN_MAIN_DB)==0 ){ + return ORIGVFS(pVfs)->xOpen(ORIGVFS(pVfs), zName, pFile, flags, pOutFlags); + } + memset(p, 0, sizeof(*p)); + p->mFlags = SQLITE_DESERIALIZE_RESIZEABLE | SQLITE_DESERIALIZE_FREEONCLOSE; + assert( pOutFlags!=0 ); /* True because flags==SQLITE_OPEN_MAIN_DB */ + *pOutFlags = flags | SQLITE_OPEN_MEMORY; + p->base.pMethods = &memdb_io_methods; + return SQLITE_OK; +} + +#if 0 /* Only used to delete rollback journals, master journals, and WAL + ** files, none of which exist in memdb. So this routine is never used */ +/* +** Delete the file located at zPath. If the dirSync argument is true, +** ensure the file-system modifications are synced to disk before +** returning. +*/ +static int memdbDelete(sqlite3_vfs *pVfs, const char *zPath, int dirSync){ + return SQLITE_IOERR_DELETE; +} +#endif + +/* +** Test for access permissions. Return true if the requested permission +** is available, or false otherwise. +** +** With memdb, no files ever exist on disk. So always return false. +*/ +static int memdbAccess( + sqlite3_vfs *pVfs, + const char *zPath, + int flags, + int *pResOut +){ + *pResOut = 0; + return SQLITE_OK; +} + +/* +** Populate buffer zOut with the full canonical pathname corresponding +** to the pathname in zPath. zOut is guaranteed to point to a buffer +** of at least (INST_MAX_PATHNAME+1) bytes. +*/ +static int memdbFullPathname( + sqlite3_vfs *pVfs, + const char *zPath, + int nOut, + char *zOut +){ + sqlite3_snprintf(nOut, zOut, "%s", zPath); + return SQLITE_OK; +} + +/* +** Open the dynamic library located at zPath and return a handle. +*/ +static void *memdbDlOpen(sqlite3_vfs *pVfs, const char *zPath){ + return ORIGVFS(pVfs)->xDlOpen(ORIGVFS(pVfs), zPath); +} + +/* +** Populate the buffer zErrMsg (size nByte bytes) with a human readable +** utf-8 string describing the most recent error encountered associated +** with dynamic libraries. +*/ +static void memdbDlError(sqlite3_vfs *pVfs, int nByte, char *zErrMsg){ + ORIGVFS(pVfs)->xDlError(ORIGVFS(pVfs), nByte, zErrMsg); +} + +/* +** Return a pointer to the symbol zSymbol in the dynamic library pHandle. +*/ +static void (*memdbDlSym(sqlite3_vfs *pVfs, void *p, const char *zSym))(void){ + return ORIGVFS(pVfs)->xDlSym(ORIGVFS(pVfs), p, zSym); +} + +/* +** Close the dynamic library handle pHandle. +*/ +static void memdbDlClose(sqlite3_vfs *pVfs, void *pHandle){ + ORIGVFS(pVfs)->xDlClose(ORIGVFS(pVfs), pHandle); +} + +/* +** Populate the buffer pointed to by zBufOut with nByte bytes of +** random data. +*/ +static int memdbRandomness(sqlite3_vfs *pVfs, int nByte, char *zBufOut){ + return ORIGVFS(pVfs)->xRandomness(ORIGVFS(pVfs), nByte, zBufOut); +} + +/* +** Sleep for nMicro microseconds. Return the number of microseconds +** actually slept. +*/ +static int memdbSleep(sqlite3_vfs *pVfs, int nMicro){ + return ORIGVFS(pVfs)->xSleep(ORIGVFS(pVfs), nMicro); +} + +#if 0 /* Never used. Modern cores only call xCurrentTimeInt64() */ +/* +** Return the current time as a Julian Day number in *pTimeOut. +*/ +static int memdbCurrentTime(sqlite3_vfs *pVfs, double *pTimeOut){ + return ORIGVFS(pVfs)->xCurrentTime(ORIGVFS(pVfs), pTimeOut); +} +#endif + +static int memdbGetLastError(sqlite3_vfs *pVfs, int a, char *b){ + return ORIGVFS(pVfs)->xGetLastError(ORIGVFS(pVfs), a, b); +} +static int memdbCurrentTimeInt64(sqlite3_vfs *pVfs, sqlite3_int64 *p){ + return ORIGVFS(pVfs)->xCurrentTimeInt64(ORIGVFS(pVfs), p); +} + +/* +** Translate a database connection pointer and schema name into a +** MemFile pointer. +*/ +static MemFile *memdbFromDbSchema(sqlite3 *db, const char *zSchema){ + MemFile *p = 0; + int rc = sqlite3_file_control(db, zSchema, SQLITE_FCNTL_FILE_POINTER, &p); + if( rc ) return 0; + if( p->base.pMethods!=&memdb_io_methods ) return 0; + return p; +} + +/* +** Return the serialization of a database +*/ +SQLITE_API unsigned char *sqlite3_serialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which database within the connection */ + sqlite3_int64 *piSize, /* Write size here, if not NULL */ + unsigned int mFlags /* Maybe SQLITE_SERIALIZE_NOCOPY */ +){ + MemFile *p; + int iDb; + Btree *pBt; + sqlite3_int64 sz; + int szPage = 0; + sqlite3_stmt *pStmt = 0; + unsigned char *pOut; + char *zSql; + int rc; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + + if( zSchema==0 ) zSchema = db->aDb[0].zDbSName; + p = memdbFromDbSchema(db, zSchema); + iDb = sqlite3FindDbName(db, zSchema); + if( piSize ) *piSize = -1; + if( iDb<0 ) return 0; + if( p ){ + if( piSize ) *piSize = p->sz; + if( mFlags & SQLITE_SERIALIZE_NOCOPY ){ + pOut = p->aData; + }else{ + pOut = sqlite3_malloc64( p->sz ); + if( pOut ) memcpy(pOut, p->aData, p->sz); + } + return pOut; + } + pBt = db->aDb[iDb].pBt; + if( pBt==0 ) return 0; + szPage = sqlite3BtreeGetPageSize(pBt); + zSql = sqlite3_mprintf("PRAGMA \"%w\".page_count", zSchema); + rc = zSql ? sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0) : SQLITE_NOMEM; + sqlite3_free(zSql); + if( rc ) return 0; + rc = sqlite3_step(pStmt); + if( rc!=SQLITE_ROW ){ + pOut = 0; + }else{ + sz = sqlite3_column_int64(pStmt, 0)*szPage; + if( piSize ) *piSize = sz; + if( mFlags & SQLITE_SERIALIZE_NOCOPY ){ + pOut = 0; + }else{ + pOut = sqlite3_malloc64( sz ); + if( pOut ){ + int nPage = sqlite3_column_int(pStmt, 0); + Pager *pPager = sqlite3BtreePager(pBt); + int pgno; + for(pgno=1; pgno<=nPage; pgno++){ + DbPage *pPage = 0; + unsigned char *pTo = pOut + szPage*(sqlite3_int64)(pgno-1); + rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pPage, 0); + if( rc==SQLITE_OK ){ + memcpy(pTo, sqlite3PagerGetData(pPage), szPage); + }else{ + memset(pTo, 0, szPage); + } + sqlite3PagerUnref(pPage); + } + } + } + } + sqlite3_finalize(pStmt); + return pOut; +} + +/* Convert zSchema to a MemDB and initialize its content. +*/ +SQLITE_API int sqlite3_deserialize( + sqlite3 *db, /* The database connection */ + const char *zSchema, /* Which DB to reopen with the deserialization */ + unsigned char *pData, /* The serialized database content */ + sqlite3_int64 szDb, /* Number bytes in the deserialization */ + sqlite3_int64 szBuf, /* Total size of buffer pData[] */ + unsigned mFlags /* Zero or more SQLITE_DESERIALIZE_* flags */ +){ + MemFile *p; + char *zSql; + sqlite3_stmt *pStmt = 0; + int rc; + int iDb; + +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + return SQLITE_MISUSE_BKPT; + } + if( szDb<0 ) return SQLITE_MISUSE_BKPT; + if( szBuf<0 ) return SQLITE_MISUSE_BKPT; +#endif + + sqlite3_mutex_enter(db->mutex); + if( zSchema==0 ) zSchema = db->aDb[0].zDbSName; + iDb = sqlite3FindDbName(db, zSchema); + if( iDb<0 ){ + rc = SQLITE_ERROR; + goto end_deserialize; + } + zSql = sqlite3_mprintf("ATTACH x AS %Q", zSchema); + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + sqlite3_free(zSql); + if( rc ) goto end_deserialize; + db->init.iDb = (u8)iDb; + db->init.reopenMemdb = 1; + rc = sqlite3_step(pStmt); + db->init.reopenMemdb = 0; + if( rc!=SQLITE_DONE ){ + rc = SQLITE_ERROR; + goto end_deserialize; + } + p = memdbFromDbSchema(db, zSchema); + if( p==0 ){ + rc = SQLITE_ERROR; + }else{ + p->aData = pData; + p->sz = szDb; + p->szMax = szBuf; + p->mFlags = mFlags; + rc = SQLITE_OK; + } + +end_deserialize: + sqlite3_finalize(pStmt); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +/* +** This routine is called when the extension is loaded. +** Register the new VFS. +*/ +SQLITE_PRIVATE int sqlite3MemdbInit(void){ + sqlite3_vfs *pLower = sqlite3_vfs_find(0); + int sz = pLower->szOsFile; + memdb_vfs.pAppData = pLower; + /* In all known configurations of SQLite, the size of a default + ** sqlite3_file is greater than the size of a memdb sqlite3_file. + ** Should that ever change, remove the following NEVER() */ + if( NEVER(sz<sizeof(MemFile)) ) sz = sizeof(MemFile); + memdb_vfs.szOsFile = sz; + return sqlite3_vfs_register(&memdb_vfs, 0); +} +#endif /* SQLITE_ENABLE_DESERIALIZE */ + +/************** End of memdb.c ***********************************************/ /************** Begin file bitvec.c ******************************************/ /* ** 2008 February 16 @@ -44087,7 +46868,7 @@ struct PCache { ** ** assert( sqlite3PcachePageSanity(pPg) ); */ -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG SQLITE_PRIVATE int sqlite3PcachePageSanity(PgHdr *pPg){ PCache *pCache; assert( pPg!=0 ); @@ -44174,12 +46955,9 @@ static void pcacheManageDirtyList(PgHdr *pPage, u8 addRemove){ p->eCreate = 2; } } - pPage->pDirtyNext = 0; - pPage->pDirtyPrev = 0; } if( addRemove & PCACHE_DIRTYLIST_ADD ){ - assert( pPage->pDirtyNext==0 && pPage->pDirtyPrev==0 && p->pDirty!=pPage ); - + pPage->pDirtyPrev = 0; pPage->pDirtyNext = p->pDirty; if( pPage->pDirtyNext ){ assert( pPage->pDirtyNext->pDirtyPrev==0 ); @@ -44417,7 +47195,7 @@ SQLITE_PRIVATE int sqlite3PcacheFetchStress( sqlite3_log(SQLITE_FULL, "spill page %d making room for %d - cache used: %d/%d", pPg->pgno, pgno, - sqlite3GlobalConfig.pcache.xPagecount(pCache->pCache), + sqlite3GlobalConfig.pcache2.xPagecount(pCache->pCache), numberOfCachePages(pCache)); #endif pcacheTrace(("%p.SPILL %d\n",pCache,pPg->pgno)); @@ -44496,11 +47274,7 @@ SQLITE_PRIVATE void SQLITE_NOINLINE sqlite3PcacheRelease(PgHdr *p){ if( (--p->nRef)==0 ){ if( p->flags&PGHDR_CLEAN ){ pcacheUnpin(p); - }else if( p->pDirtyPrev!=0 ){ /*OPTIMIZATION-IF-FALSE*/ - /* Move the page to the head of the dirty list. If p->pDirtyPrev==0, - ** then page p is already at the head of the dirty list and the - ** following call would be a no-op. Hence the OPTIMIZATION-IF-FALSE - ** tag above. */ + }else{ pcacheManageDirtyList(p, PCACHE_DIRTYLIST_FRONT); } } @@ -44556,16 +47330,15 @@ SQLITE_PRIVATE void sqlite3PcacheMakeDirty(PgHdr *p){ */ SQLITE_PRIVATE void sqlite3PcacheMakeClean(PgHdr *p){ assert( sqlite3PcachePageSanity(p) ); - if( ALWAYS((p->flags & PGHDR_DIRTY)!=0) ){ - assert( (p->flags & PGHDR_CLEAN)==0 ); - pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); - p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC|PGHDR_WRITEABLE); - p->flags |= PGHDR_CLEAN; - pcacheTrace(("%p.CLEAN %d\n",p->pCache,p->pgno)); - assert( sqlite3PcachePageSanity(p) ); - if( p->nRef==0 ){ - pcacheUnpin(p); - } + assert( (p->flags & PGHDR_DIRTY)!=0 ); + assert( (p->flags & PGHDR_CLEAN)==0 ); + pcacheManageDirtyList(p, PCACHE_DIRTYLIST_REMOVE); + p->flags &= ~(PGHDR_DIRTY|PGHDR_NEED_SYNC|PGHDR_WRITEABLE); + p->flags |= PGHDR_CLEAN; + pcacheTrace(("%p.CLEAN %d\n",p->pCache,p->pgno)); + assert( sqlite3PcachePageSanity(p) ); + if( p->nRef==0 ){ + pcacheUnpin(p); } } @@ -44961,7 +47734,6 @@ typedef struct PGroup PGroup; struct PgHdr1 { sqlite3_pcache_page page; /* Base class. Must be first. pBuf & pExtra */ unsigned int iKey; /* Key value (page number) */ - u8 isPinned; /* Page in use, not on the LRU list */ u8 isBulkLocal; /* This page from bulk local storage */ u8 isAnchor; /* This is the PGroup.lru element */ PgHdr1 *pNext; /* Next in hash table chain */ @@ -44970,6 +47742,12 @@ struct PgHdr1 { PgHdr1 *pLruPrev; /* Previous in LRU list of unpinned pages */ }; +/* +** A page is pinned if it is no on the LRU list +*/ +#define PAGE_IS_PINNED(p) ((p)->pLruNext==0) +#define PAGE_IS_UNPINNED(p) ((p)->pLruNext!=0) + /* Each page cache (or PCache) belongs to a PGroup. A PGroup is a set ** of one or more PCaches that are able to recycle each other's unpinned ** pages when they are under memory pressure. A PGroup is an instance of @@ -44997,7 +47775,7 @@ struct PGroup { unsigned int nMaxPage; /* Sum of nMax for purgeable caches */ unsigned int nMinPage; /* Sum of nMin for purgeable caches */ unsigned int mxPinned; /* nMaxpage + 10 - nMinPage */ - unsigned int nCurrentPage; /* Number of purgeable pages allocated */ + unsigned int nPurgeable; /* Number of purgeable pages allocated */ PgHdr1 lru; /* The beginning and end of the LRU list */ }; @@ -45011,11 +47789,13 @@ struct PGroup { */ struct PCache1 { /* Cache configuration parameters. Page size (szPage) and the purgeable - ** flag (bPurgeable) are set when the cache is created. nMax may be + ** flag (bPurgeable) and the pnPurgeable pointer are all set when the + ** cache is created and are never changed thereafter. nMax may be ** modified at any time by a call to the pcache1Cachesize() method. ** The PGroup mutex must be held when accessing nMax. */ PGroup *pGroup; /* PGroup this cache belongs to */ + unsigned int *pnPurgeable; /* Pointer to pGroup->nPurgeable */ int szPage; /* Size of database content section */ int szExtra; /* sizeof(MemPage)+sizeof(PgHdr) */ int szAlloc; /* Total size of one pcache line */ @@ -45110,6 +47890,7 @@ SQLITE_PRIVATE void sqlite3PCacheBufferSetup(void *pBuf, int sz, int n){ if( pcache1.isInit ){ PgFreeslot *p; if( pBuf==0 ) sz = n = 0; + if( n==0 ) sz = 0; sz = ROUNDDOWN8(sz); pcache1.szSlot = sz; pcache1.nSlot = pcache1.nFreeSlot = n; @@ -45150,8 +47931,7 @@ static int pcache1InitBulk(PCache1 *pCache){ sqlite3EndBenignMalloc(); if( zBulk ){ int nBulk = sqlite3MallocSize(zBulk)/pCache->szAlloc; - int i; - for(i=0; i<nBulk; i++){ + do{ PgHdr1 *pX = (PgHdr1*)&zBulk[pCache->szPage]; pX->page.pBuf = zBulk; pX->page.pExtra = &pX[1]; @@ -45160,7 +47940,7 @@ static int pcache1InitBulk(PCache1 *pCache){ pX->pNext = pCache->pFree; pCache->pFree = pX; zBulk += pCache->szAlloc; - } + }while( --nBulk ); } return pCache->pFree!=0; } @@ -45303,9 +48083,7 @@ static PgHdr1 *pcache1AllocPage(PCache1 *pCache, int benignMalloc){ p->isBulkLocal = 0; p->isAnchor = 0; } - if( pCache->bPurgeable ){ - pCache->pGroup->nCurrentPage++; - } + (*pCache->pnPurgeable)++; return p; } @@ -45326,9 +48104,7 @@ static void pcache1FreePage(PgHdr1 *p){ sqlite3_free(p); #endif } - if( pCache->bPurgeable ){ - pCache->pGroup->nCurrentPage--; - } + (*pCache->pnPurgeable)--; } /* @@ -45423,22 +48199,18 @@ static void pcache1ResizeHash(PCache1 *p){ ** The PGroup mutex must be held when this function is called. */ static PgHdr1 *pcache1PinPage(PgHdr1 *pPage){ - PCache1 *pCache; - assert( pPage!=0 ); - assert( pPage->isPinned==0 ); - pCache = pPage->pCache; + assert( PAGE_IS_UNPINNED(pPage) ); assert( pPage->pLruNext ); assert( pPage->pLruPrev ); - assert( sqlite3_mutex_held(pCache->pGroup->mutex) ); + assert( sqlite3_mutex_held(pPage->pCache->pGroup->mutex) ); pPage->pLruPrev->pLruNext = pPage->pLruNext; pPage->pLruNext->pLruPrev = pPage->pLruPrev; pPage->pLruNext = 0; pPage->pLruPrev = 0; - pPage->isPinned = 1; assert( pPage->isAnchor==0 ); - assert( pCache->pGroup->lru.isAnchor==1 ); - pCache->nRecyclable--; + assert( pPage->pCache->pGroup->lru.isAnchor==1 ); + pPage->pCache->nRecyclable--; return pPage; } @@ -45472,11 +48244,11 @@ static void pcache1EnforceMaxPage(PCache1 *pCache){ PGroup *pGroup = pCache->pGroup; PgHdr1 *p; assert( sqlite3_mutex_held(pGroup->mutex) ); - while( pGroup->nCurrentPage>pGroup->nMaxPage + while( pGroup->nPurgeable>pGroup->nMaxPage && (p=pGroup->lru.pLruPrev)->isAnchor==0 ){ assert( p->pCache->pGroup==pGroup ); - assert( p->isPinned==0 ); + assert( PAGE_IS_UNPINNED(p) ); pcache1PinPage(p); pcache1RemoveFromHash(p, 1); } @@ -45525,7 +48297,7 @@ static void pcache1TruncateUnsafe( if( pPage->iKey>=iLimit ){ pCache->nPage--; *pp = pPage->pNext; - if( !pPage->isPinned ) pcache1PinPage(pPage); + if( PAGE_IS_UNPINNED(pPage) ) pcache1PinPage(pPage); pcache1FreePage(pPage); }else{ pp = &pPage->pNext; @@ -45643,6 +48415,10 @@ static sqlite3_pcache *pcache1Create(int szPage, int szExtra, int bPurgeable){ pCache->nMin = 10; pGroup->nMinPage += pCache->nMin; pGroup->mxPinned = pGroup->nMaxPage + 10 - pGroup->nMinPage; + pCache->pnPurgeable = &pGroup->nPurgeable; + }else{ + static unsigned int dummyCurrentPage; + pCache->pnPurgeable = &dummyCurrentPage; } pcache1LeaveMutex(pGroup); if( pCache->nHash==0 ){ @@ -45744,7 +48520,7 @@ static SQLITE_NOINLINE PgHdr1 *pcache1FetchStage2( ){ PCache1 *pOther; pPage = pGroup->lru.pLruPrev; - assert( pPage->isPinned==0 ); + assert( PAGE_IS_UNPINNED(pPage) ); pcache1RemoveFromHash(pPage, 0); pcache1PinPage(pPage); pOther = pPage->pCache; @@ -45752,7 +48528,7 @@ static SQLITE_NOINLINE PgHdr1 *pcache1FetchStage2( pcache1FreePage(pPage); pPage = 0; }else{ - pGroup->nCurrentPage -= (pOther->bPurgeable - pCache->bPurgeable); + pGroup->nPurgeable -= (pOther->bPurgeable - pCache->bPurgeable); } } @@ -45771,7 +48547,6 @@ static SQLITE_NOINLINE PgHdr1 *pcache1FetchStage2( pPage->pCache = pCache; pPage->pLruPrev = 0; pPage->pLruNext = 0; - pPage->isPinned = 1; *(void **)pPage->page.pExtra = 0; pCache->apHash[h] = pPage; if( iKey>pCache->iMaxKey ){ @@ -45857,7 +48632,7 @@ static PgHdr1 *pcache1FetchNoMutex( ** Otherwise (page not in hash and createFlag!=0) continue with ** subsequent steps to try to create the page. */ if( pPage ){ - if( !pPage->isPinned ){ + if( PAGE_IS_UNPINNED(pPage) ){ return pcache1PinPage(pPage); }else{ return pPage; @@ -45932,9 +48707,9 @@ static void pcache1Unpin( ** part of the PGroup LRU list. */ assert( pPage->pLruPrev==0 && pPage->pLruNext==0 ); - assert( pPage->isPinned==1 ); + assert( PAGE_IS_PINNED(pPage) ); - if( reuseUnlikely || pGroup->nCurrentPage>pGroup->nMaxPage ){ + if( reuseUnlikely || pGroup->nPurgeable>pGroup->nMaxPage ){ pcache1RemoveFromHash(pPage, 1); }else{ /* Add the page to the PGroup LRU list. */ @@ -45943,7 +48718,6 @@ static void pcache1Unpin( (pPage->pLruNext = *ppFirst)->pLruPrev = pPage; *ppFirst = pPage; pCache->nRecyclable++; - pPage->isPinned = 0; } pcache1LeaveMutex(pCache->pGroup); @@ -46076,7 +48850,7 @@ SQLITE_PRIVATE int sqlite3PcacheReleaseMemory(int nReq){ int nFree = 0; assert( sqlite3_mutex_notheld(pcache1.grp.mutex) ); assert( sqlite3_mutex_notheld(pcache1.mutex) ); - if( sqlite3GlobalConfig.nPage==0 ){ + if( sqlite3GlobalConfig.pPage==0 ){ PgHdr1 *p; pcache1EnterMutex(&pcache1.grp); while( (nReq<0 || nFree<nReq) @@ -46087,7 +48861,7 @@ SQLITE_PRIVATE int sqlite3PcacheReleaseMemory(int nReq){ #ifdef SQLITE_PCACHE_SEPARATE_HEADER nFree += sqlite3MemSize(p); #endif - assert( p->isPinned==0 ); + assert( PAGE_IS_UNPINNED(p) ); pcache1PinPage(p); pcache1RemoveFromHash(p, 1); } @@ -46111,10 +48885,10 @@ SQLITE_PRIVATE void sqlite3PcacheStats( PgHdr1 *p; int nRecyclable = 0; for(p=pcache1.grp.lru.pLruNext; p && !p->isAnchor; p=p->pLruNext){ - assert( p->isPinned==0 ); + assert( PAGE_IS_UNPINNED(p) ); nRecyclable++; } - *pnCurrent = pcache1.grp.nCurrentPage; + *pnCurrent = pcache1.grp.nPurgeable; *pnMax = (int)pcache1.grp.nMaxPage; *pnMin = (int)pcache1.grp.nMinPage; *pnRecyclable = nRecyclable; @@ -46669,11 +49443,11 @@ SQLITE_PRIVATE int sqlite3RowSetTest(RowSet *pRowSet, int iBatch, sqlite3_int64 /* #include "sqliteInt.h" */ -/* Additional values that can be added to the sync_flags argument of -** sqlite3WalFrames(): +/* Macros for extracting appropriate sync flags for either transaction +** commits (WAL_SYNC_FLAGS(X)) or for checkpoint ops (CKPT_SYNC_FLAGS(X)): */ -#define WAL_SYNC_TRANSACTIONS 0x20 /* Sync at the end of each transaction */ -#define SQLITE_SYNC_MASK 0x13 /* Mask off the SQLITE_SYNC_* values */ +#define WAL_SYNC_FLAGS(X) ((X)&0x03) +#define CKPT_SYNC_FLAGS(X) (((X)>>2)&0x03) #ifdef SQLITE_OMIT_WAL # define sqlite3WalOpen(x,y,z) 0 @@ -46906,8 +49680,8 @@ int sqlite3PagerTrace=1; /* True to enable tracing */ ** associated file-descriptor is returned. FILEHANDLEID() takes an sqlite3_file ** struct as its argument. */ -#define PAGERID(p) ((int)(p->fd)) -#define FILEHANDLEID(fd) ((int)fd) +#define PAGERID(p) (SQLITE_PTR_TO_INT(p->fd)) +#define FILEHANDLEID(fd) (SQLITE_PTR_TO_INT(fd)) /* ** The Pager.eState variable stores the current 'state' of a pager. A @@ -47394,6 +50168,18 @@ struct PagerSavepoint { ** is set to zero in all other states. In PAGER_ERROR state, Pager.errCode ** is always set to SQLITE_FULL, SQLITE_IOERR or one of the SQLITE_IOERR_XXX ** sub-codes. +** +** syncFlags, walSyncFlags +** +** syncFlags is either SQLITE_SYNC_NORMAL (0x02) or SQLITE_SYNC_FULL (0x03). +** syncFlags is used for rollback mode. walSyncFlags is used for WAL mode +** and contains the flags used to sync the checkpoint operations in the +** lower two bits, and sync flags used for transaction commits in the WAL +** file in bits 0x04 and 0x08. In other words, to get the correct sync flags +** for checkpoint operations, use (walSyncFlags&0x03) and to get the correct +** sync flags for transaction commit, use ((walSyncFlags>>2)&0x03). Note +** that with synchronous=NORMAL in WAL mode, transaction commit is not synced +** meaning that the 0x04 and 0x08 bits are both zero. */ struct Pager { sqlite3_vfs *pVfs; /* OS functions to use for IO */ @@ -47403,9 +50189,8 @@ struct Pager { u8 noSync; /* Do not sync the journal if true */ u8 fullSync; /* Do extra syncs of the journal for robustness */ u8 extraSync; /* sync directory after journal delete */ - u8 ckptSyncFlags; /* SYNC_NORMAL or SYNC_FULL for checkpoint */ - u8 walSyncFlags; /* SYNC_NORMAL or SYNC_FULL for wal writes */ u8 syncFlags; /* SYNC_NORMAL or SYNC_FULL otherwise */ + u8 walSyncFlags; /* See description above */ u8 tempFile; /* zFilename is a temporary or immutable file */ u8 noLock; /* Do not lock (except in WAL mode) */ u8 readOnly; /* True for a read-only database */ @@ -47466,7 +50251,7 @@ struct Pager { char *zJournal; /* Name of the journal file */ int (*xBusyHandler)(void*); /* Function to call when busy */ void *pBusyHandlerArg; /* Context argument for xBusyHandler */ - int aStat[3]; /* Total cache hits, misses and writes */ + int aStat[4]; /* Total cache hits, misses, writes, spills */ #ifdef SQLITE_TEST int nRead; /* Database pages read */ #endif @@ -47494,6 +50279,7 @@ struct Pager { #define PAGER_STAT_HIT 0 #define PAGER_STAT_MISS 1 #define PAGER_STAT_WRITE 2 +#define PAGER_STAT_SPILL 3 /* ** The following global variables hold counters used for @@ -47725,6 +50511,7 @@ static int assert_pager_state(Pager *p){ assert( isOpen(p->jfd) || p->journalMode==PAGER_JOURNALMODE_OFF || p->journalMode==PAGER_JOURNALMODE_WAL + || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC) ); assert( pPager->dbOrigSize<=pPager->dbHintSize ); break; @@ -47736,6 +50523,7 @@ static int assert_pager_state(Pager *p){ assert( isOpen(p->jfd) || p->journalMode==PAGER_JOURNALMODE_OFF || p->journalMode==PAGER_JOURNALMODE_WAL + || (sqlite3OsDeviceCharacteristics(p->fd)&SQLITE_IOCAP_BATCH_ATOMIC) ); break; @@ -47946,34 +50734,47 @@ static int pagerLockDb(Pager *pPager, int eLock){ } /* -** This function determines whether or not the atomic-write optimization -** can be used with this pager. The optimization can be used if: +** This function determines whether or not the atomic-write or +** atomic-batch-write optimizations can be used with this pager. The +** atomic-write optimization can be used if: ** ** (a) the value returned by OsDeviceCharacteristics() indicates that ** a database page may be written atomically, and ** (b) the value returned by OsSectorSize() is less than or equal ** to the page size. ** -** The optimization is also always enabled for temporary files. It is -** an error to call this function if pPager is opened on an in-memory -** database. +** If it can be used, then the value returned is the size of the journal +** file when it contains rollback data for exactly one page. +** +** The atomic-batch-write optimization can be used if OsDeviceCharacteristics() +** returns a value with the SQLITE_IOCAP_BATCH_ATOMIC bit set. -1 is +** returned in this case. ** -** If the optimization cannot be used, 0 is returned. If it can be used, -** then the value returned is the size of the journal file when it -** contains rollback data for exactly one page. +** If neither optimization can be used, 0 is returned. */ -#ifdef SQLITE_ENABLE_ATOMIC_WRITE static int jrnlBufferSize(Pager *pPager){ assert( !MEMDB ); - if( !pPager->tempFile ){ - int dc; /* Device characteristics */ - int nSector; /* Sector size */ - int szPage; /* Page size */ - assert( isOpen(pPager->fd) ); - dc = sqlite3OsDeviceCharacteristics(pPager->fd); - nSector = pPager->sectorSize; - szPage = pPager->pageSize; +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) + int dc; /* Device characteristics */ + + assert( isOpen(pPager->fd) ); + dc = sqlite3OsDeviceCharacteristics(pPager->fd); +#else + UNUSED_PARAMETER(pPager); +#endif + +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + if( pPager->dbSize>0 && (dc&SQLITE_IOCAP_BATCH_ATOMIC) ){ + return -1; + } +#endif + +#ifdef SQLITE_ENABLE_ATOMIC_WRITE + { + int nSector = pPager->sectorSize; + int szPage = pPager->pageSize; assert(SQLITE_IOCAP_ATOMIC512==(512>>8)); assert(SQLITE_IOCAP_ATOMIC64K==(65536>>8)); @@ -47983,11 +50784,11 @@ static int jrnlBufferSize(Pager *pPager){ } return JOURNAL_HDR_SZ(pPager) + JOURNAL_PG_SZ(pPager); -} -#else -# define jrnlBufferSize(x) 0 #endif + return 0; +} + /* ** If SQLITE_CHECK_PAGES is defined then we do some sanity checking ** on the cache using a hash function. This is used for testing @@ -48069,6 +50870,7 @@ static int readMasterJournal(sqlite3_file *pJrnl, char *zMaster, u32 nMaster){ || szJ<16 || SQLITE_OK!=(rc = read32bits(pJrnl, szJ-16, &len)) || len>=nMaster + || len>szJ-16 || len==0 || SQLITE_OK!=(rc = read32bits(pJrnl, szJ-12, &cksum)) || SQLITE_OK!=(rc = sqlite3OsRead(pJrnl, aMagic, 8, szJ-8)) @@ -48790,7 +51592,9 @@ static int pager_end_transaction(Pager *pPager, int hasMaster, int bCommit){ } releaseAllSavepoints(pPager); - assert( isOpen(pPager->jfd) || pPager->pInJournal==0 ); + assert( isOpen(pPager->jfd) || pPager->pInJournal==0 + || (sqlite3OsDeviceCharacteristics(pPager->fd)&SQLITE_IOCAP_BATCH_ATOMIC) + ); if( isOpen(pPager->jfd) ){ assert( !pagerUseWal(pPager) ); @@ -48878,7 +51682,7 @@ static int pager_end_transaction(Pager *pPager, int hasMaster, int bCommit){ rc = pager_truncate(pPager, pPager->dbSize); } - if( rc==SQLITE_OK && bCommit && isOpen(pPager->fd) ){ + if( rc==SQLITE_OK && bCommit ){ rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_COMMIT_PHASETWO, 0); if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; } @@ -49036,6 +51840,11 @@ static int pager_playback_one_page( char *aData; /* Temporary storage for the page */ sqlite3_file *jfd; /* The file descriptor for the journal file */ int isSynced; /* True if journal page is synced */ +#ifdef SQLITE_HAS_CODEC + /* The jrnlEnc flag is true if Journal pages should be passed through + ** the codec. It is false for pure in-memory journals. */ + const int jrnlEnc = (isMainJrnl || pPager->subjInMemory==0); +#endif assert( (isMainJrnl&~1)==0 ); /* isMainJrnl is 0 or 1 */ assert( (isSavepnt&~1)==0 ); /* isSavepnt is 0 or 1 */ @@ -49159,14 +51968,34 @@ static int pager_playback_one_page( i64 ofst = (pgno-1)*(i64)pPager->pageSize; testcase( !isSavepnt && pPg!=0 && (pPg->flags&PGHDR_NEED_SYNC)!=0 ); assert( !pagerUseWal(pPager) ); + + /* Write the data read from the journal back into the database file. + ** This is usually safe even for an encrypted database - as the data + ** was encrypted before it was written to the journal file. The exception + ** is if the data was just read from an in-memory sub-journal. In that + ** case it must be encrypted here before it is copied into the database + ** file. */ +#ifdef SQLITE_HAS_CODEC + if( !jrnlEnc ){ + CODEC2(pPager, aData, pgno, 7, rc=SQLITE_NOMEM_BKPT, aData); + rc = sqlite3OsWrite(pPager->fd, (u8 *)aData, pPager->pageSize, ofst); + CODEC1(pPager, aData, pgno, 3, rc=SQLITE_NOMEM_BKPT); + }else +#endif rc = sqlite3OsWrite(pPager->fd, (u8 *)aData, pPager->pageSize, ofst); + if( pgno>pPager->dbFileSize ){ pPager->dbFileSize = pgno; } if( pPager->pBackup ){ - CODEC1(pPager, aData, pgno, 3, rc=SQLITE_NOMEM_BKPT); +#ifdef SQLITE_HAS_CODEC + if( jrnlEnc ){ + CODEC1(pPager, aData, pgno, 3, rc=SQLITE_NOMEM_BKPT); + sqlite3BackupUpdate(pPager->pBackup, pgno, (u8*)aData); + CODEC2(pPager, aData, pgno, 7, rc=SQLITE_NOMEM_BKPT,aData); + }else +#endif sqlite3BackupUpdate(pPager->pBackup, pgno, (u8*)aData); - CODEC2(pPager, aData, pgno, 7, rc=SQLITE_NOMEM_BKPT, aData); } }else if( !isMainJrnl && pPg==0 ){ /* If this is a rollback of a savepoint and data was not written to @@ -49218,7 +52047,9 @@ static int pager_playback_one_page( } /* Decode the page just read from disk */ - CODEC1(pPager, pData, pPg->pgno, 3, rc=SQLITE_NOMEM_BKPT); +#if SQLITE_HAS_CODEC + if( jrnlEnc ){ CODEC1(pPager, pData, pPg->pgno, 3, rc=SQLITE_NOMEM_BKPT); } +#endif sqlite3PcacheRelease(pPg); } return rc; @@ -49531,6 +52362,7 @@ static int pager_playback(Pager *pPager, int isHot){ char *zMaster = 0; /* Name of master journal file if any */ int needPagerReset; /* True to reset page prior to first page rollback */ int nPlayback = 0; /* Total number of pages restored from journal */ + u32 savedPageSize = pPager->pageSize; /* Figure out how many records are in the journal. Abort early if ** the journal is empty. @@ -49660,15 +52492,16 @@ static int pager_playback(Pager *pPager, int isHot){ assert( 0 ); end_playback: + if( rc==SQLITE_OK ){ + rc = sqlite3PagerSetPagesize(pPager, &savedPageSize, -1); + } /* Following a rollback, the database file should be back in its original ** state prior to the start of the transaction, so invoke the ** SQLITE_FCNTL_DB_UNCHANGED file-control method to disable the ** assertion that the transaction counter was modified. */ #ifdef SQLITE_DEBUG - if( pPager->fd->pMethods ){ - sqlite3OsFileControlHint(pPager->fd,SQLITE_FCNTL_DB_UNCHANGED,0); - } + sqlite3OsFileControlHint(pPager->fd,SQLITE_FCNTL_DB_UNCHANGED,0); #endif /* If this playback is happening automatically as a result of an IO or @@ -49718,7 +52551,8 @@ end_playback: /* -** Read the content for page pPg out of the database file and into +** Read the content for page pPg out of the database file (or out of +** the WAL if that is where the most recent copy if found) into ** pPg->pData. A shared lock or greater must be held on the database ** file before this function is called. ** @@ -49728,30 +52562,33 @@ end_playback: ** If an IO error occurs, then the IO error is returned to the caller. ** Otherwise, SQLITE_OK is returned. */ -static int readDbPage(PgHdr *pPg, u32 iFrame){ +static int readDbPage(PgHdr *pPg){ Pager *pPager = pPg->pPager; /* Pager object associated with page pPg */ - Pgno pgno = pPg->pgno; /* Page number to read */ int rc = SQLITE_OK; /* Return code */ - int pgsz = pPager->pageSize; /* Number of bytes to read */ + +#ifndef SQLITE_OMIT_WAL + u32 iFrame = 0; /* Frame of WAL containing pgno */ assert( pPager->eState>=PAGER_READER && !MEMDB ); assert( isOpen(pPager->fd) ); -#ifndef SQLITE_OMIT_WAL + if( pagerUseWal(pPager) ){ + rc = sqlite3WalFindFrame(pPager->pWal, pPg->pgno, &iFrame); + if( rc ) return rc; + } if( iFrame ){ - /* Try to pull the page from the write-ahead log. */ - rc = sqlite3WalReadFrame(pPager->pWal, iFrame, pgsz, pPg->pData); + rc = sqlite3WalReadFrame(pPager->pWal, iFrame,pPager->pageSize,pPg->pData); }else #endif { - i64 iOffset = (pgno-1)*(i64)pPager->pageSize; - rc = sqlite3OsRead(pPager->fd, pPg->pData, pgsz, iOffset); + i64 iOffset = (pPg->pgno-1)*(i64)pPager->pageSize; + rc = sqlite3OsRead(pPager->fd, pPg->pData, pPager->pageSize, iOffset); if( rc==SQLITE_IOERR_SHORT_READ ){ rc = SQLITE_OK; } } - if( pgno==1 ){ + if( pPg->pgno==1 ){ if( rc ){ /* If the read is unsuccessful, set the dbFileVers[] to something ** that will never be a valid file version. dbFileVers[] is a copy @@ -49771,13 +52608,13 @@ static int readDbPage(PgHdr *pPg, u32 iFrame){ memcpy(&pPager->dbFileVers, dbFileVers, sizeof(pPager->dbFileVers)); } } - CODEC1(pPager, pPg->pData, pgno, 3, rc = SQLITE_NOMEM_BKPT); + CODEC1(pPager, pPg->pData, pPg->pgno, 3, rc = SQLITE_NOMEM_BKPT); PAGER_INCR(sqlite3_pager_readdb_count); PAGER_INCR(pPager->nRead); - IOTRACE(("PGIN %p %d\n", pPager, pgno)); + IOTRACE(("PGIN %p %d\n", pPager, pPg->pgno)); PAGERTRACE(("FETCH %d page %d hash(%08x)\n", - PAGERID(pPager), pgno, pager_pagehash(pPg))); + PAGERID(pPager), pPg->pgno, pager_pagehash(pPg))); return rc; } @@ -49828,11 +52665,7 @@ static int pagerUndoCallback(void *pCtx, Pgno iPg){ if( sqlite3PcachePageRefcount(pPg)==1 ){ sqlite3PcacheDrop(pPg); }else{ - u32 iFrame = 0; - rc = sqlite3WalFindFrame(pPager->pWal, pPg->pgno, &iFrame); - if( rc==SQLITE_OK ){ - rc = readDbPage(pPg, iFrame); - } + rc = readDbPage(pPg); if( rc==SQLITE_OK ){ pPager->xReiniter(pPg); } @@ -50004,7 +52837,7 @@ static int pagerPagecount(Pager *pPager, Pgno *pnPage){ nPage = sqlite3WalDbsize(pPager->pWal); /* If the number of pages in the database is not available from the - ** WAL sub-system, determine the page counte based on the size of + ** WAL sub-system, determine the page count based on the size of ** the database file. If the size of the database file is not an ** integer multiple of the page-size, round up the result. */ @@ -50055,23 +52888,21 @@ static int pagerOpenWalIfPresent(Pager *pPager){ if( !pPager->tempFile ){ int isWal; /* True if WAL file exists */ - Pgno nPage; /* Size of the database file */ - - rc = pagerPagecount(pPager, &nPage); - if( rc ) return rc; - if( nPage==0 ){ - rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0); - if( rc==SQLITE_IOERR_DELETE_NOENT ) rc = SQLITE_OK; - isWal = 0; - }else{ - rc = sqlite3OsAccess( - pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &isWal - ); - } + rc = sqlite3OsAccess( + pPager->pVfs, pPager->zWal, SQLITE_ACCESS_EXISTS, &isWal + ); if( rc==SQLITE_OK ){ if( isWal ){ - testcase( sqlite3PcachePagecount(pPager->pPCache)==0 ); - rc = sqlite3PagerOpenWal(pPager, 0); + Pgno nPage; /* Size of the database file */ + + rc = pagerPagecount(pPager, &nPage); + if( rc ) return rc; + if( nPage==0 ){ + rc = sqlite3OsDelete(pPager->pVfs, pPager->zWal, 0); + }else{ + testcase( sqlite3PcachePagecount(pPager->pPCache)==0 ); + rc = sqlite3PagerOpenWal(pPager, 0); + } }else if( pPager->journalMode==PAGER_JOURNALMODE_WAL ){ pPager->journalMode = PAGER_JOURNALMODE_DELETE; } @@ -50340,20 +53171,17 @@ SQLITE_PRIVATE void sqlite3PagerSetFlags( } if( pPager->noSync ){ pPager->syncFlags = 0; - pPager->ckptSyncFlags = 0; }else if( pgFlags & PAGER_FULLFSYNC ){ pPager->syncFlags = SQLITE_SYNC_FULL; - pPager->ckptSyncFlags = SQLITE_SYNC_FULL; - }else if( pgFlags & PAGER_CKPT_FULLFSYNC ){ - pPager->syncFlags = SQLITE_SYNC_NORMAL; - pPager->ckptSyncFlags = SQLITE_SYNC_FULL; }else{ pPager->syncFlags = SQLITE_SYNC_NORMAL; - pPager->ckptSyncFlags = SQLITE_SYNC_NORMAL; } - pPager->walSyncFlags = pPager->syncFlags; + pPager->walSyncFlags = (pPager->syncFlags<<2); if( pPager->fullSync ){ - pPager->walSyncFlags |= WAL_SYNC_TRANSACTIONS; + pPager->walSyncFlags |= pPager->syncFlags; + } + if( (pgFlags & PAGER_CKPT_FULLFSYNC) && !pPager->noSync ){ + pPager->walSyncFlags |= (SQLITE_SYNC_FULL<<2); } if( pgFlags & PAGER_CACHESPILL ){ pPager->doNotSpill &= ~SPILLFLAG_OFF; @@ -50426,20 +53254,18 @@ static int pagerOpentemp( ** retried. If it returns zero, then the SQLITE_BUSY error is ** returned to the caller of the pager API function. */ -SQLITE_PRIVATE void sqlite3PagerSetBusyhandler( +SQLITE_PRIVATE void sqlite3PagerSetBusyHandler( Pager *pPager, /* Pager object */ int (*xBusyHandler)(void *), /* Pointer to busy-handler function */ void *pBusyHandlerArg /* Argument to pass to xBusyHandler */ ){ + void **ap; pPager->xBusyHandler = xBusyHandler; pPager->pBusyHandlerArg = pBusyHandlerArg; - - if( isOpen(pPager->fd) ){ - void **ap = (void **)&pPager->xBusyHandler; - assert( ((int(*)(void *))(ap[0]))==xBusyHandler ); - assert( ap[1]==pBusyHandlerArg ); - sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap); - } + ap = (void **)&pPager->xBusyHandler; + assert( ((int(*)(void *))(ap[0]))==xBusyHandler ); + assert( ap[1]==pBusyHandlerArg ); + sqlite3OsFileControlHint(pPager->fd, SQLITE_FCNTL_BUSYHANDLER, (void *)ap); } /* @@ -50825,6 +53651,30 @@ static void pagerFreeMapHdrs(Pager *pPager){ } } +/* Verify that the database file has not be deleted or renamed out from +** under the pager. Return SQLITE_OK if the database is still where it ought +** to be on disk. Return non-zero (SQLITE_READONLY_DBMOVED or some other error +** code from sqlite3OsAccess()) if the database has gone missing. +*/ +static int databaseIsUnmoved(Pager *pPager){ + int bHasMoved = 0; + int rc; + + if( pPager->tempFile ) return SQLITE_OK; + if( pPager->dbSize==0 ) return SQLITE_OK; + assert( pPager->zFilename && pPager->zFilename[0] ); + rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_HAS_MOVED, &bHasMoved); + if( rc==SQLITE_NOTFOUND ){ + /* If the HAS_MOVED file-control is unimplemented, assume that the file + ** has not been moved. That is the historical behavior of SQLite: prior to + ** version 3.8.3, it never checked */ + rc = SQLITE_OK; + }else if( rc==SQLITE_OK && bHasMoved ){ + rc = SQLITE_READONLY_DBMOVED; + } + return rc; +} + /* ** Shutdown the page cache. Free all memory and close all files. @@ -50841,8 +53691,7 @@ static void pagerFreeMapHdrs(Pager *pPager){ ** to the caller. */ SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3 *db){ - u8 *pTmp = (u8 *)pPager->pTmpSpace; - + u8 *pTmp = (u8*)pPager->pTmpSpace; assert( db || pagerUseWal(pPager)==0 ); assert( assert_pager_state(pPager) ); disable_simulated_io_errors(); @@ -50851,11 +53700,17 @@ SQLITE_PRIVATE int sqlite3PagerClose(Pager *pPager, sqlite3 *db){ /* pPager->errCode = 0; */ pPager->exclusiveMode = 0; #ifndef SQLITE_OMIT_WAL - assert( db || pPager->pWal==0 ); - sqlite3WalClose(pPager->pWal, db, pPager->ckptSyncFlags, pPager->pageSize, - (db && (db->flags & SQLITE_NoCkptOnClose) ? 0 : pTmp) - ); - pPager->pWal = 0; + { + u8 *a = 0; + assert( db || pPager->pWal==0 ); + if( db && 0==(db->flags & SQLITE_NoCkptOnClose) + && SQLITE_OK==databaseIsUnmoved(pPager) + ){ + a = pTmp; + } + sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags, pPager->pageSize,a); + pPager->pWal = 0; + } #endif pager_reset(pPager); if( MEMDB ){ @@ -51230,8 +54085,13 @@ static int subjournalPage(PgHdr *pPg){ void *pData = pPg->pData; i64 offset = (i64)pPager->nSubRec*(4+pPager->pageSize); char *pData2; - - CODEC2(pPager, pData, pPg->pgno, 7, return SQLITE_NOMEM_BKPT, pData2); + +#if SQLITE_HAS_CODEC + if( !pPager->subjInMemory ){ + CODEC2(pPager, pData, pPg->pgno, 7, return SQLITE_NOMEM_BKPT, pData2); + }else +#endif + pData2 = pData; PAGERTRACE(("STMT-JOURNAL %d page %d\n", PAGERID(pPager), pPg->pgno)); rc = write32bits(pPager->sjfd, offset, pPg->pgno); if( rc==SQLITE_OK ){ @@ -51307,6 +54167,7 @@ static int pagerStress(void *p, PgHdr *pPg){ return SQLITE_OK; } + pPager->aStat[PAGER_STAT_SPILL]++; pPg->pDirty = 0; if( pagerUseWal(pPager) ){ /* Write a single frame for this page to the log. */ @@ -51315,6 +54176,13 @@ static int pagerStress(void *p, PgHdr *pPg){ rc = pagerWalFrames(pPager, pPg, 0, 0); } }else{ + +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + if( pPager->tempFile==0 ){ + rc = sqlite3JournalCreate(pPager->jfd); + if( rc!=SQLITE_OK ) return pager_error(pPager, rc); + } +#endif /* Sync the journal file if required. */ if( pPg->flags&PGHDR_NEED_SYNC @@ -51405,6 +54273,11 @@ SQLITE_PRIVATE int sqlite3PagerOpen( int rc = SQLITE_OK; /* Return code */ int tempFile = 0; /* True for temp files (incl. in-memory files) */ int memDb = 0; /* True if this is an in-memory file */ +#ifdef SQLITE_ENABLE_DESERIALIZE + int memJM = 0; /* Memory journal mode */ +#else +# define memJM 0 +#endif int readOnly = 0; /* True if this is a read-only file */ int journalFileSize; /* Bytes to allocate for each journal fd */ char *zPathname = 0; /* Full path to database file */ @@ -51532,7 +54405,10 @@ SQLITE_PRIVATE int sqlite3PagerOpen( int fout = 0; /* VFS flags returned by xOpen() */ rc = sqlite3OsOpen(pVfs, pPager->zFilename, pPager->fd, vfsFlags, &fout); assert( !memDb ); - readOnly = (fout&SQLITE_OPEN_READONLY); +#ifdef SQLITE_ENABLE_DESERIALIZE + memJM = (fout&SQLITE_OPEN_MEMORY)!=0; +#endif + readOnly = (fout&SQLITE_OPEN_READONLY)!=0; /* If the file was successfully opened for read/write access, ** choose a default page size in case we have to create the @@ -51648,13 +54524,11 @@ act_like_temp_file: assert( pPager->extraSync==0 ); assert( pPager->syncFlags==0 ); assert( pPager->walSyncFlags==0 ); - assert( pPager->ckptSyncFlags==0 ); }else{ pPager->fullSync = 1; pPager->extraSync = 0; pPager->syncFlags = SQLITE_SYNC_NORMAL; - pPager->walSyncFlags = SQLITE_SYNC_NORMAL | WAL_SYNC_TRANSACTIONS; - pPager->ckptSyncFlags = SQLITE_SYNC_NORMAL; + pPager->walSyncFlags = SQLITE_SYNC_NORMAL | (SQLITE_SYNC_NORMAL<<2); } /* pPager->pFirst = 0; */ /* pPager->pFirstSynced = 0; */ @@ -51665,7 +54539,7 @@ act_like_temp_file: setSectorSize(pPager); if( !useJournal ){ pPager->journalMode = PAGER_JOURNALMODE_OFF; - }else if( memDb ){ + }else if( memDb || memJM ){ pPager->journalMode = PAGER_JOURNALMODE_MEMORY; } /* pPager->xBusyHandler = 0; */ @@ -51680,30 +54554,6 @@ act_like_temp_file: } -/* Verify that the database file has not be deleted or renamed out from -** under the pager. Return SQLITE_OK if the database is still were it ought -** to be on disk. Return non-zero (SQLITE_READONLY_DBMOVED or some other error -** code from sqlite3OsAccess()) if the database has gone missing. -*/ -static int databaseIsUnmoved(Pager *pPager){ - int bHasMoved = 0; - int rc; - - if( pPager->tempFile ) return SQLITE_OK; - if( pPager->dbSize==0 ) return SQLITE_OK; - assert( pPager->zFilename && pPager->zFilename[0] ); - rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_HAS_MOVED, &bHasMoved); - if( rc==SQLITE_NOTFOUND ){ - /* If the HAS_MOVED file-control is unimplemented, assume that the file - ** has not been moved. That is the historical behavior of SQLite: prior to - ** version 3.8.3, it never checked */ - rc = SQLITE_OK; - }else if( rc==SQLITE_OK && bHasMoved ){ - rc = SQLITE_READONLY_DBMOVED; - } - return rc; -} - /* ** This function is called after transitioning from PAGER_UNLOCK to @@ -52009,19 +54859,14 @@ SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager){ ** detected. The chance of an undetected change is so small that ** it can be neglected. */ - Pgno nPage = 0; char dbFileVers[sizeof(pPager->dbFileVers)]; - rc = pagerPagecount(pPager, &nPage); - if( rc ) goto failed; - - if( nPage>0 ){ - IOTRACE(("CKVERS %p %d\n", pPager, sizeof(dbFileVers))); - rc = sqlite3OsRead(pPager->fd, &dbFileVers, sizeof(dbFileVers), 24); - if( rc!=SQLITE_OK && rc!=SQLITE_IOERR_SHORT_READ ){ + IOTRACE(("CKVERS %p %d\n", pPager, sizeof(dbFileVers))); + rc = sqlite3OsRead(pPager->fd, &dbFileVers, sizeof(dbFileVers), 24); + if( rc!=SQLITE_OK ){ + if( rc!=SQLITE_IOERR_SHORT_READ ){ goto failed; } - }else{ memset(dbFileVers, 0, sizeof(dbFileVers)); } @@ -52079,7 +54924,8 @@ SQLITE_PRIVATE int sqlite3PagerSharedLock(Pager *pPager){ ** nothing to rollback, so this routine is a no-op. */ static void pagerUnlockIfUnused(Pager *pPager){ - if( pPager->nMmapOut==0 && (sqlite3PcacheRefCount(pPager->pPCache)==0) ){ + if( sqlite3PcacheRefCount(pPager->pPCache)==0 ){ + assert( pPager->nMmapOut==0 ); /* because page1 is never memory mapped */ pagerUnlockAndRollback(pPager); } } @@ -52220,14 +55066,9 @@ static int getPageNormal( memset(pPg->pData, 0, pPager->pageSize); IOTRACE(("ZERO %p %d\n", pPager, pgno)); }else{ - u32 iFrame = 0; /* Frame to read from WAL file */ - if( pagerUseWal(pPager) ){ - rc = sqlite3WalFindFrame(pPager->pWal, pgno, &iFrame); - if( rc!=SQLITE_OK ) goto pager_acquire_err; - } assert( pPg->pPager==pPager ); pPager->aStat[PAGER_STAT_MISS]++; - rc = readDbPage(pPg, iFrame); + rc = readDbPage(pPg); if( rc!=SQLITE_OK ){ goto pager_acquire_err; } @@ -52301,7 +55142,7 @@ static int getPageMMap( } if( pPg==0 ){ rc = pagerAcquireMapPage(pPager, pgno, pData, &pPg); - }else{ + }else{ sqlite3OsUnfetch(pPager->fd, (i64)(pgno-1)*pPager->pageSize, pData); } if( pPg ){ @@ -52370,25 +55211,40 @@ SQLITE_PRIVATE DbPage *sqlite3PagerLookup(Pager *pPager, Pgno pgno){ /* ** Release a page reference. ** -** If the number of references to the page drop to zero, then the -** page is added to the LRU list. When all references to all pages -** are released, a rollback occurs and the lock on the database is -** removed. +** The sqlite3PagerUnref() and sqlite3PagerUnrefNotNull() may only be +** used if we know that the page being released is not the last page. +** The btree layer always holds page1 open until the end, so these first +** to routines can be used to release any page other than BtShared.pPage1. +** +** Use sqlite3PagerUnrefPageOne() to release page1. This latter routine +** checks the total number of outstanding pages and if the number of +** pages reaches zero it drops the database lock. */ SQLITE_PRIVATE void sqlite3PagerUnrefNotNull(DbPage *pPg){ - Pager *pPager; + TESTONLY( Pager *pPager = pPg->pPager; ) assert( pPg!=0 ); - pPager = pPg->pPager; if( pPg->flags & PGHDR_MMAP ){ + assert( pPg->pgno!=1 ); /* Page1 is never memory mapped */ pagerReleaseMapPage(pPg); }else{ sqlite3PcacheRelease(pPg); } - pagerUnlockIfUnused(pPager); + /* Do not use this routine to release the last reference to page1 */ + assert( sqlite3PcacheRefCount(pPager->pPCache)>0 ); } SQLITE_PRIVATE void sqlite3PagerUnref(DbPage *pPg){ if( pPg ) sqlite3PagerUnrefNotNull(pPg); } +SQLITE_PRIVATE void sqlite3PagerUnrefPageOne(DbPage *pPg){ + Pager *pPager; + assert( pPg!=0 ); + assert( pPg->pgno==1 ); + assert( (pPg->flags & PGHDR_MMAP)==0 ); /* Page1 is never memory mapped */ + pPager = pPg->pPager; + sqlite3PagerResetLockTimeout(pPager); + sqlite3PcacheRelease(pPg); + pagerUnlockIfUnused(pPager); +} /* ** This function is called at the start of every write transaction. @@ -52981,12 +55837,9 @@ static int pager_incr_changecounter(Pager *pPager, int isDirectMode){ */ SQLITE_PRIVATE int sqlite3PagerSync(Pager *pPager, const char *zMaster){ int rc = SQLITE_OK; - - if( isOpen(pPager->fd) ){ - void *pArg = (void*)zMaster; - rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_SYNC, pArg); - if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; - } + void *pArg = (void*)zMaster; + rc = sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_SYNC, pArg); + if( rc==SQLITE_NOTFOUND ) rc = SQLITE_OK; if( rc==SQLITE_OK && !pPager->noSync ){ assert( !MEMDB ); rc = sqlite3OsSync(pPager->fd, pPager->syncFlags); @@ -53100,6 +55953,21 @@ SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne( sqlite3PcacheCleanAll(pPager->pPCache); } }else{ + /* The bBatch boolean is true if the batch-atomic-write commit method + ** should be used. No rollback journal is created if batch-atomic-write + ** is enabled. + */ + sqlite3_file *fd = pPager->fd; +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + const int bBatch = zMaster==0 /* An SQLITE_IOCAP_BATCH_ATOMIC commit */ + && (sqlite3OsDeviceCharacteristics(fd) & SQLITE_IOCAP_BATCH_ATOMIC) + && !pPager->noSync + && sqlite3JournalIsInMemory(pPager->jfd); +#else +# define bBatch 0 +#endif + +#ifdef SQLITE_ENABLE_ATOMIC_WRITE /* The following block updates the change-counter. Exactly how it ** does this depends on whether or not the atomic-update optimization ** was enabled at compile time, and if this transaction meets the @@ -53123,33 +55991,40 @@ SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne( ** in 'direct' mode. In this case the journal file will never be ** created for this transaction. */ - #ifdef SQLITE_ENABLE_ATOMIC_WRITE - PgHdr *pPg; - assert( isOpen(pPager->jfd) - || pPager->journalMode==PAGER_JOURNALMODE_OFF - || pPager->journalMode==PAGER_JOURNALMODE_WAL - ); - if( !zMaster && isOpen(pPager->jfd) - && pPager->journalOff==jrnlBufferSize(pPager) - && pPager->dbSize>=pPager->dbOrigSize - && (0==(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty) - ){ - /* Update the db file change counter via the direct-write method. The - ** following call will modify the in-memory representation of page 1 - ** to include the updated change counter and then write page 1 - ** directly to the database file. Because of the atomic-write - ** property of the host file-system, this is safe. - */ - rc = pager_incr_changecounter(pPager, 1); - }else{ - rc = sqlite3JournalCreate(pPager->jfd); - if( rc==SQLITE_OK ){ - rc = pager_incr_changecounter(pPager, 0); + if( bBatch==0 ){ + PgHdr *pPg; + assert( isOpen(pPager->jfd) + || pPager->journalMode==PAGER_JOURNALMODE_OFF + || pPager->journalMode==PAGER_JOURNALMODE_WAL + ); + if( !zMaster && isOpen(pPager->jfd) + && pPager->journalOff==jrnlBufferSize(pPager) + && pPager->dbSize>=pPager->dbOrigSize + && (!(pPg = sqlite3PcacheDirtyList(pPager->pPCache)) || 0==pPg->pDirty) + ){ + /* Update the db file change counter via the direct-write method. The + ** following call will modify the in-memory representation of page 1 + ** to include the updated change counter and then write page 1 + ** directly to the database file. Because of the atomic-write + ** property of the host file-system, this is safe. + */ + rc = pager_incr_changecounter(pPager, 1); + }else{ + rc = sqlite3JournalCreate(pPager->jfd); + if( rc==SQLITE_OK ){ + rc = pager_incr_changecounter(pPager, 0); + } } } - #else +#else +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + if( zMaster ){ + rc = sqlite3JournalCreate(pPager->jfd); + if( rc!=SQLITE_OK ) goto commit_phase_one_exit; + } +#endif rc = pager_incr_changecounter(pPager, 0); - #endif +#endif if( rc!=SQLITE_OK ) goto commit_phase_one_exit; /* Write the master journal name into the journal file. If a master @@ -53172,8 +56047,25 @@ SQLITE_PRIVATE int sqlite3PagerCommitPhaseOne( */ rc = syncJournal(pPager, 0); if( rc!=SQLITE_OK ) goto commit_phase_one_exit; - + + if( bBatch ){ + /* The pager is now in DBMOD state. But regardless of what happens + ** next, attempting to play the journal back into the database would + ** be unsafe. Close it now to make sure that does not happen. */ + sqlite3OsClose(pPager->jfd); + rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_BEGIN_ATOMIC_WRITE, 0); + if( rc!=SQLITE_OK ) goto commit_phase_one_exit; + } rc = pager_write_pagelist(pPager,sqlite3PcacheDirtyList(pPager->pPCache)); + if( bBatch ){ + if( rc==SQLITE_OK ){ + rc = sqlite3OsFileControl(fd, SQLITE_FCNTL_COMMIT_ATOMIC_WRITE, 0); + } + if( rc!=SQLITE_OK ){ + sqlite3OsFileControlHint(fd, SQLITE_FCNTL_ROLLBACK_ATOMIC_WRITE, 0); + } + } + if( rc!=SQLITE_OK ){ assert( rc!=SQLITE_IOERR_BLOCKED ); goto commit_phase_one_exit; @@ -53394,8 +56286,12 @@ SQLITE_PRIVATE int *sqlite3PagerStats(Pager *pPager){ #endif /* -** Parameter eStat must be either SQLITE_DBSTATUS_CACHE_HIT or -** SQLITE_DBSTATUS_CACHE_MISS. Before returning, *pnVal is incremented by the +** Parameter eStat must be one of SQLITE_DBSTATUS_CACHE_HIT, _MISS, _WRITE, +** or _WRITE+1. The SQLITE_DBSTATUS_CACHE_WRITE+1 case is a translation +** of SQLITE_DBSTATUS_CACHE_SPILL. The _SPILL case is not contiguous because +** it was added later. +** +** Before returning, *pnVal is incremented by the ** current cache hit or miss count, according to the value of eStat. If the ** reset parameter is non-zero, the cache hit or miss count is zeroed before ** returning. @@ -53405,15 +56301,18 @@ SQLITE_PRIVATE void sqlite3PagerCacheStat(Pager *pPager, int eStat, int reset, i assert( eStat==SQLITE_DBSTATUS_CACHE_HIT || eStat==SQLITE_DBSTATUS_CACHE_MISS || eStat==SQLITE_DBSTATUS_CACHE_WRITE + || eStat==SQLITE_DBSTATUS_CACHE_WRITE+1 ); assert( SQLITE_DBSTATUS_CACHE_HIT+1==SQLITE_DBSTATUS_CACHE_MISS ); assert( SQLITE_DBSTATUS_CACHE_HIT+2==SQLITE_DBSTATUS_CACHE_WRITE ); - assert( PAGER_STAT_HIT==0 && PAGER_STAT_MISS==1 && PAGER_STAT_WRITE==2 ); + assert( PAGER_STAT_HIT==0 && PAGER_STAT_MISS==1 + && PAGER_STAT_WRITE==2 && PAGER_STAT_SPILL==3 ); - *pnVal += pPager->aStat[eStat - SQLITE_DBSTATUS_CACHE_HIT]; + eStat -= SQLITE_DBSTATUS_CACHE_HIT; + *pnVal += pPager->aStat[eStat]; if( reset ){ - pPager->aStat[eStat - SQLITE_DBSTATUS_CACHE_HIT] = 0; + pPager->aStat[eStat] = 0; } } @@ -53617,6 +56516,16 @@ SQLITE_PRIVATE sqlite3_file *sqlite3PagerFile(Pager *pPager){ return pPager->fd; } +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT +/* +** Reset the lock timeout for pager. +*/ +SQLITE_PRIVATE void sqlite3PagerResetLockTimeout(Pager *pPager){ + int x = 0; + sqlite3OsFileControl(pPager->fd, SQLITE_FCNTL_LOCK_TIMEOUT, &x); +} +#endif + /* ** Return the file handle for the journal file (if it exists). ** This will be either the rollback journal or the WAL file. @@ -54074,9 +56983,10 @@ SQLITE_PRIVATE int sqlite3PagerCheckpoint( rc = sqlite3WalCheckpoint(pPager->pWal, db, eMode, (eMode==SQLITE_CHECKPOINT_PASSIVE ? 0 : pPager->xBusyHandler), pPager->pBusyHandlerArg, - pPager->ckptSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace, + pPager->walSyncFlags, pPager->pageSize, (u8 *)pPager->pTmpSpace, pnLog, pnCkpt ); + sqlite3PagerResetLockTimeout(pPager); } return rc; } @@ -54231,7 +57141,7 @@ SQLITE_PRIVATE int sqlite3PagerCloseWal(Pager *pPager, sqlite3 *db){ if( rc==SQLITE_OK && pPager->pWal ){ rc = pagerExclusiveLock(pPager); if( rc==SQLITE_OK ){ - rc = sqlite3WalClose(pPager->pWal, db, pPager->ckptSyncFlags, + rc = sqlite3WalClose(pPager->pWal, db, pPager->walSyncFlags, pPager->pageSize, (u8*)pPager->pTmpSpace); pPager->pWal = 0; pagerFixMaplimit(pPager); @@ -54437,6 +57347,10 @@ SQLITE_PRIVATE int sqlite3PagerWalFramesize(Pager *pPager){ ** on a network filesystem. All users of the database must be able to ** share memory. ** +** In the default unix and windows implementation, the wal-index is a mmapped +** file whose name is the database name with a "-shm" suffix added. For that +** reason, the wal-index is sometimes called the "shm" file. +** ** The wal-index is transient. After a crash, the wal-index can (and should ** be) reconstructed from the original WAL file. In fact, the VFS is required ** to either truncate or zero the header of the wal-index when the last @@ -54576,9 +57490,18 @@ SQLITE_PRIVATE int sqlite3WalTrace = 0; #define WALINDEX_MAX_VERSION 3007000 /* -** Indices of various locking bytes. WAL_NREADER is the number +** Index numbers for various locking bytes. WAL_NREADER is the number ** of available reader locks and should be at least 3. The default ** is SQLITE_SHM_NLOCK==8 and WAL_NREADER==5. +** +** Technically, the various VFSes are free to implement these locks however +** they see fit. However, compatibility is encouraged so that VFSes can +** interoperate. The standard implemention used on both unix and windows +** is for the index number to indicate a byte offset into the +** WalCkptInfo.aLock[] array in the wal-index header. In other words, all +** locks are on the shm file. The WALINDEX_LOCK_OFFSET constant (which +** should be 120) is the location in the shm file for the first locking +** byte. */ #define WAL_WRITE_LOCK 0 #define WAL_ALL_BUT_WRITE 1 @@ -54702,7 +57625,6 @@ struct WalCkptInfo { #define WAL_FRAME_HDRSIZE 24 /* Size of write ahead log header, including checksum. */ -/* #define WAL_HDRSIZE 24 */ #define WAL_HDRSIZE 32 /* WAL magic value. Either this value, or the same value with the least @@ -54748,6 +57670,7 @@ struct Wal { u8 truncateOnCommit; /* True to truncate WAL file on commit */ u8 syncHeader; /* Fsync the WAL header if true */ u8 padToSectorBoundary; /* Pad transactions out to the next sector */ + u8 bShmUnreliable; /* SHM content is read-only and unreliable */ WalIndexHdr hdr; /* Wal-index header for current transaction */ u32 minFrame; /* Ignore wal frames before this one */ u32 iReCksum; /* On commit, recalculate checksums from here */ @@ -54837,11 +57760,20 @@ struct WalIterator { ** is broken into pages of WALINDEX_PGSZ bytes. Wal-index pages are ** numbered from zero. ** +** If the wal-index is currently smaller the iPage pages then the size +** of the wal-index might be increased, but only if it is safe to do +** so. It is safe to enlarge the wal-index if pWal->writeLock is true +** or pWal->exclusiveMode==WAL_HEAPMEMORY_MODE. +** ** If this call is successful, *ppPage is set to point to the wal-index ** page and SQLITE_OK is returned. If an error (an OOM or VFS error) occurs, ** then an SQLite error code is returned and *ppPage is set to 0. */ -static int walIndexPage(Wal *pWal, int iPage, volatile u32 **ppPage){ +static SQLITE_NOINLINE int walIndexPageRealloc( + Wal *pWal, /* The WAL context */ + int iPage, /* The page we seek */ + volatile u32 **ppPage /* Write the page pointer here */ +){ int rc = SQLITE_OK; /* Enlarge the pWal->apWiData[] array if required */ @@ -54860,16 +57792,19 @@ static int walIndexPage(Wal *pWal, int iPage, volatile u32 **ppPage){ } /* Request a pointer to the required page from the VFS */ - if( pWal->apWiData[iPage]==0 ){ - if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){ - pWal->apWiData[iPage] = (u32 volatile *)sqlite3MallocZero(WALINDEX_PGSZ); - if( !pWal->apWiData[iPage] ) rc = SQLITE_NOMEM_BKPT; - }else{ - rc = sqlite3OsShmMap(pWal->pDbFd, iPage, WALINDEX_PGSZ, - pWal->writeLock, (void volatile **)&pWal->apWiData[iPage] - ); + assert( pWal->apWiData[iPage]==0 ); + if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){ + pWal->apWiData[iPage] = (u32 volatile *)sqlite3MallocZero(WALINDEX_PGSZ); + if( !pWal->apWiData[iPage] ) rc = SQLITE_NOMEM_BKPT; + }else{ + rc = sqlite3OsShmMap(pWal->pDbFd, iPage, WALINDEX_PGSZ, + pWal->writeLock, (void volatile **)&pWal->apWiData[iPage] + ); + assert( pWal->apWiData[iPage]!=0 || rc!=SQLITE_OK || pWal->writeLock==0 ); + testcase( pWal->apWiData[iPage]==0 && rc==SQLITE_OK ); + if( (rc&0xff)==SQLITE_READONLY ){ + pWal->readOnly |= WAL_SHM_RDONLY; if( rc==SQLITE_READONLY ){ - pWal->readOnly |= WAL_SHM_RDONLY; rc = SQLITE_OK; } } @@ -54879,6 +57814,16 @@ static int walIndexPage(Wal *pWal, int iPage, volatile u32 **ppPage){ assert( iPage==0 || *ppPage || rc!=SQLITE_OK ); return rc; } +static int walIndexPage( + Wal *pWal, /* The WAL context */ + int iPage, /* The page we seek */ + volatile u32 **ppPage /* Write the page pointer here */ +){ + if( pWal->nWiData<=iPage || (*ppPage = pWal->apWiData[iPage])==0 ){ + return walIndexPageRealloc(pWal, iPage, ppPage); + } + return SQLITE_OK; +} /* ** Return a pointer to the WalCkptInfo structure in the wal-index. @@ -55392,7 +58337,6 @@ static int walIndexRecover(Wal *pWal){ i64 nSize; /* Size of log file */ u32 aFrameCksum[2] = {0, 0}; int iLock; /* Lock offset to lock for checkpoint */ - int nLock; /* Number of locks to hold */ /* Obtain an exclusive lock on all byte in the locking range not already ** locked by the caller. The caller is guaranteed to have locked the @@ -55405,11 +58349,17 @@ static int walIndexRecover(Wal *pWal){ assert( WAL_CKPT_LOCK==WAL_ALL_BUT_WRITE ); assert( pWal->writeLock ); iLock = WAL_ALL_BUT_WRITE + pWal->ckptLock; - nLock = SQLITE_SHM_NLOCK - iLock; - rc = walLockExclusive(pWal, iLock, nLock); + rc = walLockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock); + if( rc==SQLITE_OK ){ + rc = walLockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1); + if( rc!=SQLITE_OK ){ + walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock); + } + } if( rc ){ return rc; } + WALTRACE(("WAL%p: recovery begin...\n", pWal)); memset(&pWal->hdr, 0, sizeof(WalIndexHdr)); @@ -55547,7 +58497,8 @@ finished: recovery_error: WALTRACE(("WAL%p: recovery %s\n", pWal, rc ? "failed" : "ok")); - walUnlockExclusive(pWal, iLock, nLock); + walUnlockExclusive(pWal, iLock, WAL_READ_LOCK(0)-iLock); + walUnlockExclusive(pWal, WAL_READ_LOCK(1), WAL_NREADER-1); return rc; } @@ -55555,13 +58506,14 @@ recovery_error: ** Close an open wal-index. */ static void walIndexClose(Wal *pWal, int isDelete){ - if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE ){ + if( pWal->exclusiveMode==WAL_HEAPMEMORY_MODE || pWal->bShmUnreliable ){ int i; for(i=0; i<pWal->nWiData; i++){ sqlite3_free((void *)pWal->apWiData[i]); pWal->apWiData[i] = 0; } - }else{ + } + if( pWal->exclusiveMode!=WAL_HEAPMEMORY_MODE ){ sqlite3OsShmUnmap(pWal->pDbFd, isDelete); } } @@ -55848,8 +58800,9 @@ static void walIteratorFree(WalIterator *p){ /* ** Construct a WalInterator object that can be used to loop over all -** pages in the WAL in ascending order. The caller must hold the checkpoint -** lock. +** pages in the WAL following frame nBackfill in ascending order. Frames +** nBackfill or earlier may be included - excluding them is an optimization +** only. The caller must hold the checkpoint lock. ** ** On success, make *pp point to the newly allocated WalInterator object ** return SQLITE_OK. Otherwise, return an error code. If this routine @@ -55858,7 +58811,7 @@ static void walIteratorFree(WalIterator *p){ ** The calling routine should invoke walIteratorFree() to destroy the ** WalIterator object when it has finished with it. */ -static int walIteratorInit(Wal *pWal, WalIterator **pp){ +static int walIteratorInit(Wal *pWal, u32 nBackfill, WalIterator **pp){ WalIterator *p; /* Return value */ int nSegment; /* Number of segments to merge */ u32 iLast; /* Last frame in log */ @@ -55895,7 +58848,7 @@ static int walIteratorInit(Wal *pWal, WalIterator **pp){ rc = SQLITE_NOMEM_BKPT; } - for(i=0; rc==SQLITE_OK && i<nSegment; i++){ + for(i=walFramePage(nBackfill+1); rc==SQLITE_OK && i<nSegment; i++){ volatile ht_slot *aHash; u32 iZero; volatile u32 *aPgno; @@ -55929,6 +58882,7 @@ static int walIteratorInit(Wal *pWal, WalIterator **pp){ if( rc!=SQLITE_OK ){ walIteratorFree(p); + p = 0; } *pp = p; return rc; @@ -56051,13 +59005,6 @@ static int walCheckpoint( pInfo = walCkptInfo(pWal); if( pInfo->nBackfill<pWal->hdr.mxFrame ){ - /* Allocate the iterator */ - rc = walIteratorInit(pWal, &pIter); - if( rc!=SQLITE_OK ){ - return rc; - } - assert( pIter ); - /* EVIDENCE-OF: R-62920-47450 The busy-handler callback is never invoked ** in the SQLITE_CHECKPOINT_PASSIVE mode. */ assert( eMode!=SQLITE_CHECKPOINT_PASSIVE || xBusy==0 ); @@ -56094,7 +59041,13 @@ static int walCheckpoint( } } - if( pInfo->nBackfill<mxSafeFrame + /* Allocate the iterator */ + if( pInfo->nBackfill<mxSafeFrame ){ + rc = walIteratorInit(pWal, pInfo->nBackfill, &pIter); + assert( rc==SQLITE_OK || pIter==0 ); + } + + if( pIter && (rc = walBusyLock(pWal, xBusy, pBusyArg, WAL_READ_LOCK(0),1))==SQLITE_OK ){ i64 nSize; /* Current size of database file */ @@ -56103,9 +59056,7 @@ static int walCheckpoint( pInfo->nBackfillAttempted = mxSafeFrame; /* Sync the WAL to disk */ - if( sync_flags ){ - rc = sqlite3OsSync(pWal->pWalFd, sync_flags); - } + rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags)); /* If the database may grow as a result of this checkpoint, hint ** about the eventual size of the db file to the VFS layer. @@ -56146,8 +59097,8 @@ static int walCheckpoint( i64 szDb = pWal->hdr.nPage*(i64)szPage; testcase( IS_BIG_INT(szDb) ); rc = sqlite3OsTruncate(pWal->pDbFd, szDb); - if( rc==SQLITE_OK && sync_flags ){ - rc = sqlite3OsSync(pWal->pDbFd, sync_flags); + if( rc==SQLITE_OK ){ + rc = sqlite3OsSync(pWal->pDbFd, CKPT_SYNC_FLAGS(sync_flags)); } } if( rc==SQLITE_OK ){ @@ -56357,6 +59308,12 @@ static int walIndexTryHdr(Wal *pWal, int *pChanged){ } /* +** This is the value that walTryBeginRead returns when it needs to +** be retried. +*/ +#define WAL_RETRY (-1) + +/* ** Read the wal-index header from the wal-index and into pWal->hdr. ** If the wal-header appears to be corrupt, try to reconstruct the ** wal-index from the WAL before returning. @@ -56379,9 +59336,29 @@ static int walIndexReadHdr(Wal *pWal, int *pChanged){ assert( pChanged ); rc = walIndexPage(pWal, 0, &page0); if( rc!=SQLITE_OK ){ - return rc; - }; - assert( page0 || pWal->writeLock==0 ); + assert( rc!=SQLITE_READONLY ); /* READONLY changed to OK in walIndexPage */ + if( rc==SQLITE_READONLY_CANTINIT ){ + /* The SQLITE_READONLY_CANTINIT return means that the shared-memory + ** was openable but is not writable, and this thread is unable to + ** confirm that another write-capable connection has the shared-memory + ** open, and hence the content of the shared-memory is unreliable, + ** since the shared-memory might be inconsistent with the WAL file + ** and there is no writer on hand to fix it. */ + assert( page0==0 ); + assert( pWal->writeLock==0 ); + assert( pWal->readOnly & WAL_SHM_RDONLY ); + pWal->bShmUnreliable = 1; + pWal->exclusiveMode = WAL_HEAPMEMORY_MODE; + *pChanged = 1; + }else{ + return rc; /* Any other non-OK return is just an error */ + } + }else{ + /* page0 can be NULL if the SHM is zero bytes in size and pWal->writeLock + ** is zero, which prevents the SHM from growing */ + testcase( page0!=0 ); + } + assert( page0!=0 || pWal->writeLock==0 ); /* If the first page of the wal-index has been mapped, try to read the ** wal-index header immediately, without holding any lock. This usually @@ -56395,7 +59372,7 @@ static int walIndexReadHdr(Wal *pWal, int *pChanged){ */ assert( badHdr==0 || pWal->writeLock==0 ); if( badHdr ){ - if( pWal->readOnly & WAL_SHM_RDONLY ){ + if( pWal->bShmUnreliable==0 && (pWal->readOnly & WAL_SHM_RDONLY) ){ if( SQLITE_OK==(rc = walLockShared(pWal, WAL_WRITE_LOCK)) ){ walUnlockShared(pWal, WAL_WRITE_LOCK); rc = SQLITE_READONLY_RECOVERY; @@ -56425,15 +59402,193 @@ static int walIndexReadHdr(Wal *pWal, int *pChanged){ if( badHdr==0 && pWal->hdr.iVersion!=WALINDEX_MAX_VERSION ){ rc = SQLITE_CANTOPEN_BKPT; } + if( pWal->bShmUnreliable ){ + if( rc!=SQLITE_OK ){ + walIndexClose(pWal, 0); + pWal->bShmUnreliable = 0; + assert( pWal->nWiData>0 && pWal->apWiData[0]==0 ); + /* walIndexRecover() might have returned SHORT_READ if a concurrent + ** writer truncated the WAL out from under it. If that happens, it + ** indicates that a writer has fixed the SHM file for us, so retry */ + if( rc==SQLITE_IOERR_SHORT_READ ) rc = WAL_RETRY; + } + pWal->exclusiveMode = WAL_NORMAL_MODE; + } return rc; } /* -** This is the value that walTryBeginRead returns when it needs to -** be retried. +** Open a transaction in a connection where the shared-memory is read-only +** and where we cannot verify that there is a separate write-capable connection +** on hand to keep the shared-memory up-to-date with the WAL file. +** +** This can happen, for example, when the shared-memory is implemented by +** memory-mapping a *-shm file, where a prior writer has shut down and +** left the *-shm file on disk, and now the present connection is trying +** to use that database but lacks write permission on the *-shm file. +** Other scenarios are also possible, depending on the VFS implementation. +** +** Precondition: +** +** The *-wal file has been read and an appropriate wal-index has been +** constructed in pWal->apWiData[] using heap memory instead of shared +** memory. +** +** If this function returns SQLITE_OK, then the read transaction has +** been successfully opened. In this case output variable (*pChanged) +** is set to true before returning if the caller should discard the +** contents of the page cache before proceeding. Or, if it returns +** WAL_RETRY, then the heap memory wal-index has been discarded and +** the caller should retry opening the read transaction from the +** beginning (including attempting to map the *-shm file). +** +** If an error occurs, an SQLite error code is returned. */ -#define WAL_RETRY (-1) +static int walBeginShmUnreliable(Wal *pWal, int *pChanged){ + i64 szWal; /* Size of wal file on disk in bytes */ + i64 iOffset; /* Current offset when reading wal file */ + u8 aBuf[WAL_HDRSIZE]; /* Buffer to load WAL header into */ + u8 *aFrame = 0; /* Malloc'd buffer to load entire frame */ + int szFrame; /* Number of bytes in buffer aFrame[] */ + u8 *aData; /* Pointer to data part of aFrame buffer */ + volatile void *pDummy; /* Dummy argument for xShmMap */ + int rc; /* Return code */ + u32 aSaveCksum[2]; /* Saved copy of pWal->hdr.aFrameCksum */ + + assert( pWal->bShmUnreliable ); + assert( pWal->readOnly & WAL_SHM_RDONLY ); + assert( pWal->nWiData>0 && pWal->apWiData[0] ); + + /* Take WAL_READ_LOCK(0). This has the effect of preventing any + ** writers from running a checkpoint, but does not stop them + ** from running recovery. */ + rc = walLockShared(pWal, WAL_READ_LOCK(0)); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_BUSY ) rc = WAL_RETRY; + goto begin_unreliable_shm_out; + } + pWal->readLock = 0; + + /* Check to see if a separate writer has attached to the shared-memory area, + ** thus making the shared-memory "reliable" again. Do this by invoking + ** the xShmMap() routine of the VFS and looking to see if the return + ** is SQLITE_READONLY instead of SQLITE_READONLY_CANTINIT. + ** + ** If the shared-memory is now "reliable" return WAL_RETRY, which will + ** cause the heap-memory WAL-index to be discarded and the actual + ** shared memory to be used in its place. + ** + ** This step is important because, even though this connection is holding + ** the WAL_READ_LOCK(0) which prevents a checkpoint, a writer might + ** have already checkpointed the WAL file and, while the current + ** is active, wrap the WAL and start overwriting frames that this + ** process wants to use. + ** + ** Once sqlite3OsShmMap() has been called for an sqlite3_file and has + ** returned any SQLITE_READONLY value, it must return only SQLITE_READONLY + ** or SQLITE_READONLY_CANTINIT or some error for all subsequent invocations, + ** even if some external agent does a "chmod" to make the shared-memory + ** writable by us, until sqlite3OsShmUnmap() has been called. + ** This is a requirement on the VFS implementation. + */ + rc = sqlite3OsShmMap(pWal->pDbFd, 0, WALINDEX_PGSZ, 0, &pDummy); + assert( rc!=SQLITE_OK ); /* SQLITE_OK not possible for read-only connection */ + if( rc!=SQLITE_READONLY_CANTINIT ){ + rc = (rc==SQLITE_READONLY ? WAL_RETRY : rc); + goto begin_unreliable_shm_out; + } + + /* We reach this point only if the real shared-memory is still unreliable. + ** Assume the in-memory WAL-index substitute is correct and load it + ** into pWal->hdr. + */ + memcpy(&pWal->hdr, (void*)walIndexHdr(pWal), sizeof(WalIndexHdr)); + + /* Make sure some writer hasn't come in and changed the WAL file out + ** from under us, then disconnected, while we were not looking. + */ + rc = sqlite3OsFileSize(pWal->pWalFd, &szWal); + if( rc!=SQLITE_OK ){ + goto begin_unreliable_shm_out; + } + if( szWal<WAL_HDRSIZE ){ + /* If the wal file is too small to contain a wal-header and the + ** wal-index header has mxFrame==0, then it must be safe to proceed + ** reading the database file only. However, the page cache cannot + ** be trusted, as a read/write connection may have connected, written + ** the db, run a checkpoint, truncated the wal file and disconnected + ** since this client's last read transaction. */ + *pChanged = 1; + rc = (pWal->hdr.mxFrame==0 ? SQLITE_OK : WAL_RETRY); + goto begin_unreliable_shm_out; + } + + /* Check the salt keys at the start of the wal file still match. */ + rc = sqlite3OsRead(pWal->pWalFd, aBuf, WAL_HDRSIZE, 0); + if( rc!=SQLITE_OK ){ + goto begin_unreliable_shm_out; + } + if( memcmp(&pWal->hdr.aSalt, &aBuf[16], 8) ){ + /* Some writer has wrapped the WAL file while we were not looking. + ** Return WAL_RETRY which will cause the in-memory WAL-index to be + ** rebuilt. */ + rc = WAL_RETRY; + goto begin_unreliable_shm_out; + } + + /* Allocate a buffer to read frames into */ + szFrame = pWal->hdr.szPage + WAL_FRAME_HDRSIZE; + aFrame = (u8 *)sqlite3_malloc64(szFrame); + if( aFrame==0 ){ + rc = SQLITE_NOMEM_BKPT; + goto begin_unreliable_shm_out; + } + aData = &aFrame[WAL_FRAME_HDRSIZE]; + + /* Check to see if a complete transaction has been appended to the + ** wal file since the heap-memory wal-index was created. If so, the + ** heap-memory wal-index is discarded and WAL_RETRY returned to + ** the caller. */ + aSaveCksum[0] = pWal->hdr.aFrameCksum[0]; + aSaveCksum[1] = pWal->hdr.aFrameCksum[1]; + for(iOffset=walFrameOffset(pWal->hdr.mxFrame+1, pWal->hdr.szPage); + iOffset+szFrame<=szWal; + iOffset+=szFrame + ){ + u32 pgno; /* Database page number for frame */ + u32 nTruncate; /* dbsize field from frame header */ + + /* Read and decode the next log frame. */ + rc = sqlite3OsRead(pWal->pWalFd, aFrame, szFrame, iOffset); + if( rc!=SQLITE_OK ) break; + if( !walDecodeFrame(pWal, &pgno, &nTruncate, aData, aFrame) ) break; + + /* If nTruncate is non-zero, then a complete transaction has been + ** appended to this wal file. Set rc to WAL_RETRY and break out of + ** the loop. */ + if( nTruncate ){ + rc = WAL_RETRY; + break; + } + } + pWal->hdr.aFrameCksum[0] = aSaveCksum[0]; + pWal->hdr.aFrameCksum[1] = aSaveCksum[1]; + + begin_unreliable_shm_out: + sqlite3_free(aFrame); + if( rc!=SQLITE_OK ){ + int i; + for(i=0; i<pWal->nWiData; i++){ + sqlite3_free((void*)pWal->apWiData[i]); + pWal->apWiData[i] = 0; + } + pWal->bShmUnreliable = 0; + sqlite3WalEndReadTransaction(pWal); + *pChanged = 1; + } + return rc; +} /* ** Attempt to start a read transaction. This might fail due to a race or @@ -56449,7 +59604,7 @@ static int walIndexReadHdr(Wal *pWal, int *pChanged){ ** checkpointed. If useWal==0 then this routine calls walIndexReadHdr() ** to make a copy of the wal-index header into pWal->hdr. If the ** wal-index header has changed, *pChanged is set to 1 (as an indication -** to the caller that the local paget cache is obsolete and needs to be +** to the caller that the local page cache is obsolete and needs to be ** flushed.) When useWal==1, the wal-index header is assumed to already ** be loaded and the pChanged parameter is unused. ** @@ -56495,6 +59650,9 @@ static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){ assert( pWal->readLock<0 ); /* Not currently locked */ + /* useWal may only be set for read/write connections */ + assert( (pWal->readOnly & WAL_SHM_RDONLY)==0 || useWal==0 ); + /* Take steps to avoid spinning forever if there is a protocol error. ** ** Circumstances that cause a RETRY should only last for the briefest @@ -56523,7 +59681,10 @@ static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){ } if( !useWal ){ - rc = walIndexReadHdr(pWal, pChanged); + assert( rc==SQLITE_OK ); + if( pWal->bShmUnreliable==0 ){ + rc = walIndexReadHdr(pWal, pChanged); + } if( rc==SQLITE_BUSY ){ /* If there is not a recovery running in another thread or process ** then convert BUSY errors to WAL_RETRY. If recovery is known to @@ -56552,13 +59713,17 @@ static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){ if( rc!=SQLITE_OK ){ return rc; } + else if( pWal->bShmUnreliable ){ + return walBeginShmUnreliable(pWal, pChanged); + } } + assert( pWal->nWiData>0 ); + assert( pWal->apWiData[0]!=0 ); pInfo = walCkptInfo(pWal); - if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame + if( !useWal && pInfo->nBackfill==pWal->hdr.mxFrame #ifdef SQLITE_ENABLE_SNAPSHOT - && (pWal->pSnapshot==0 || pWal->hdr.mxFrame==0 - || 0==memcmp(&pWal->hdr, pWal->pSnapshot, sizeof(WalIndexHdr))) + && (pWal->pSnapshot==0 || pWal->hdr.mxFrame==0) #endif ){ /* The WAL has been completely backfilled (or it is empty). @@ -56629,7 +59794,7 @@ static int walTryBeginRead(Wal *pWal, int *pChanged, int useWal, int cnt){ } if( mxI==0 ){ assert( rc==SQLITE_BUSY || (pWal->readOnly & WAL_SHM_RDONLY)!=0 ); - return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTLOCK; + return rc==SQLITE_BUSY ? WAL_RETRY : SQLITE_READONLY_CANTINIT; } rc = walLockShared(pWal, WAL_READ_LOCK(mxI)); @@ -56901,7 +60066,7 @@ SQLITE_PRIVATE int sqlite3WalFindFrame( ** then the WAL is ignored by the reader so return early, as if the ** WAL were empty. */ - if( iLast==0 || pWal->readLock==0 ){ + if( iLast==0 || (pWal->readLock==0 && pWal->bShmUnreliable==0) ){ *piRead = 0; return SQLITE_OK; } @@ -56932,7 +60097,7 @@ SQLITE_PRIVATE int sqlite3WalFindFrame( ** table after the current read-transaction had started. */ iMinHash = walFramePage(pWal->minFrame); - for(iHash=walFramePage(iLast); iHash>=iMinHash && iRead==0; iHash--){ + for(iHash=walFramePage(iLast); iHash>=iMinHash; iHash--){ volatile ht_slot *aHash; /* Pointer to hash table */ volatile u32 *aPgno; /* Pointer to array of page numbers */ u32 iZero; /* Frame number corresponding to aPgno[0] */ @@ -56955,6 +60120,7 @@ SQLITE_PRIVATE int sqlite3WalFindFrame( return SQLITE_CORRUPT_BKPT; } } + if( iRead ) break; } #ifdef SQLITE_ENABLE_EXPENSIVE_ASSERT @@ -56964,8 +60130,8 @@ SQLITE_PRIVATE int sqlite3WalFindFrame( { u32 iRead2 = 0; u32 iTest; - assert( pWal->minFrame>0 ); - for(iTest=iLast; iTest>=pWal->minFrame; iTest--){ + assert( pWal->bShmUnreliable || pWal->minFrame>0 ); + for(iTest=iLast; iTest>=pWal->minFrame && iTest>0; iTest--){ if( walFramePgno(pWal, iTest)==pgno ){ iRead2 = iTest; break; @@ -57253,8 +60419,8 @@ static int walWriteToLog( iOffset += iFirstAmt; iAmt -= iFirstAmt; pContent = (void*)(iFirstAmt + (char*)pContent); - assert( p->syncFlags & (SQLITE_SYNC_NORMAL|SQLITE_SYNC_FULL) ); - rc = sqlite3OsSync(p->pFd, p->syncFlags & SQLITE_SYNC_MASK); + assert( WAL_SYNC_FLAGS(p->syncFlags)!=0 ); + rc = sqlite3OsSync(p->pFd, WAL_SYNC_FLAGS(p->syncFlags)); if( iAmt==0 || rc ) return rc; } rc = sqlite3OsWrite(p->pFd, pContent, iAmt, iOffset); @@ -57424,10 +60590,10 @@ SQLITE_PRIVATE int sqlite3WalFrames( ** an out-of-order write following a WAL restart could result in ** database corruption. See the ticket: ** - ** http://localhost:591/sqlite/info/ff5be73dee + ** https://sqlite.org/src/info/ff5be73dee */ - if( pWal->syncHeader && sync_flags ){ - rc = sqlite3OsSync(pWal->pWalFd, sync_flags & SQLITE_SYNC_MASK); + if( pWal->syncHeader ){ + rc = sqlite3OsSync(pWal->pWalFd, CKPT_SYNC_FLAGS(sync_flags)); if( rc ) return rc; } } @@ -57502,7 +60668,7 @@ SQLITE_PRIVATE int sqlite3WalFrames( ** sector boundary is synced; the part of the last frame that extends ** past the sector boundary is written after the sync. */ - if( isCommit && (sync_flags & WAL_SYNC_TRANSACTIONS)!=0 ){ + if( isCommit && WAL_SYNC_FLAGS(sync_flags)!=0 ){ int bSync = 1; if( pWal->padToSectorBoundary ){ int sectorSize = sqlite3SectorSize(pWal->pWalFd); @@ -57518,7 +60684,7 @@ SQLITE_PRIVATE int sqlite3WalFrames( } if( bSync ){ assert( rc==SQLITE_OK ); - rc = sqlite3OsSync(w.pFd, sync_flags & SQLITE_SYNC_MASK); + rc = sqlite3OsSync(w.pFd, WAL_SYNC_FLAGS(sync_flags)); } } @@ -57741,24 +60907,24 @@ SQLITE_PRIVATE int sqlite3WalExclusiveMode(Wal *pWal, int op){ assert( pWal->readLock>=0 || (op<=0 && pWal->exclusiveMode==0) ); if( op==0 ){ - if( pWal->exclusiveMode ){ - pWal->exclusiveMode = 0; + if( pWal->exclusiveMode!=WAL_NORMAL_MODE ){ + pWal->exclusiveMode = WAL_NORMAL_MODE; if( walLockShared(pWal, WAL_READ_LOCK(pWal->readLock))!=SQLITE_OK ){ - pWal->exclusiveMode = 1; + pWal->exclusiveMode = WAL_EXCLUSIVE_MODE; } - rc = pWal->exclusiveMode==0; + rc = pWal->exclusiveMode==WAL_NORMAL_MODE; }else{ /* Already in locking_mode=NORMAL */ rc = 0; } }else if( op>0 ){ - assert( pWal->exclusiveMode==0 ); + assert( pWal->exclusiveMode==WAL_NORMAL_MODE ); assert( pWal->readLock>=0 ); walUnlockShared(pWal, WAL_READ_LOCK(pWal->readLock)); - pWal->exclusiveMode = 1; + pWal->exclusiveMode = WAL_EXCLUSIVE_MODE; rc = 1; }else{ - rc = pWal->exclusiveMode==0; + rc = pWal->exclusiveMode==WAL_NORMAL_MODE; } return rc; } @@ -58314,10 +61480,12 @@ struct BtShared { #define BTS_READ_ONLY 0x0001 /* Underlying file is readonly */ #define BTS_PAGESIZE_FIXED 0x0002 /* Page size can no longer be changed */ #define BTS_SECURE_DELETE 0x0004 /* PRAGMA secure_delete is enabled */ -#define BTS_INITIALLY_EMPTY 0x0008 /* Database was empty at trans start */ -#define BTS_NO_WAL 0x0010 /* Do not open write-ahead-log files */ -#define BTS_EXCLUSIVE 0x0020 /* pWriter has an exclusive lock */ -#define BTS_PENDING 0x0040 /* Waiting for read-locks to clear */ +#define BTS_OVERWRITE 0x0008 /* Overwrite deleted content with zeros */ +#define BTS_FAST_SECURE 0x000c /* Combination of the previous two */ +#define BTS_INITIALLY_EMPTY 0x0010 /* Database was empty at trans start */ +#define BTS_NO_WAL 0x0020 /* Do not open write-ahead-log files */ +#define BTS_EXCLUSIVE 0x0040 /* pWriter has an exclusive lock */ +#define BTS_PENDING 0x0080 /* Waiting for read-locks to clear */ /* ** An instance of the following structure is used to hold information @@ -58363,30 +61531,31 @@ struct CellInfo { ** eState==FAULT: Cursor fault with skipNext as error code. */ struct BtCursor { - Btree *pBtree; /* The Btree to which this cursor belongs */ - BtShared *pBt; /* The BtShared this cursor points to */ - BtCursor *pNext; /* Forms a linked list of all cursors */ - Pgno *aOverflow; /* Cache of overflow page locations */ - CellInfo info; /* A parse of the cell we are pointing at */ - i64 nKey; /* Size of pKey, or last integer key */ - void *pKey; /* Saved key that was cursor last known position */ - Pgno pgnoRoot; /* The root page of this tree */ - int nOvflAlloc; /* Allocated size of aOverflow[] array */ - int skipNext; /* Prev() is noop if negative. Next() is noop if positive. - ** Error code if eState==CURSOR_FAULT */ + u8 eState; /* One of the CURSOR_XXX constants (see below) */ u8 curFlags; /* zero or more BTCF_* flags defined below */ u8 curPagerFlags; /* Flags to send to sqlite3PagerGet() */ - u8 eState; /* One of the CURSOR_XXX constants (see below) */ u8 hints; /* As configured by CursorSetHints() */ + int skipNext; /* Prev() is noop if negative. Next() is noop if positive. + ** Error code if eState==CURSOR_FAULT */ + Btree *pBtree; /* The Btree to which this cursor belongs */ + Pgno *aOverflow; /* Cache of overflow page locations */ + void *pKey; /* Saved key that was cursor last known position */ /* All fields above are zeroed when the cursor is allocated. See ** sqlite3BtreeCursorZero(). Fields that follow must be manually ** initialized. */ +#define BTCURSOR_FIRST_UNINIT pBt /* Name of first uninitialized field */ + BtShared *pBt; /* The BtShared this cursor points to */ + BtCursor *pNext; /* Forms a linked list of all cursors */ + CellInfo info; /* A parse of the cell we are pointing at */ + i64 nKey; /* Size of pKey, or last integer key */ + Pgno pgnoRoot; /* The root page of this tree */ i8 iPage; /* Index of current page in apPage */ u8 curIntKey; /* Value of apPage[0]->intKey */ - struct KeyInfo *pKeyInfo; /* Argument passed to comparison function */ - void *padding1; /* Make object size a multiple of 16 */ - u16 aiIdx[BTCURSOR_MAX_DEPTH]; /* Current index in apPage[i] */ - MemPage *apPage[BTCURSOR_MAX_DEPTH]; /* Pages from root to current page */ + u16 ix; /* Current index for apPage[iPage] */ + u16 aiIdx[BTCURSOR_MAX_DEPTH-1]; /* Current index in apPage[i] */ + struct KeyInfo *pKeyInfo; /* Arg passed to comparison function */ + MemPage *pPage; /* Current page */ + MemPage *apPage[BTCURSOR_MAX_DEPTH-1]; /* Stack of parents of current page */ }; /* @@ -58429,8 +61598,8 @@ struct BtCursor { ** Do nothing else with this cursor. Any attempt to use the cursor ** should return the error code stored in BtCursor.skipNext */ -#define CURSOR_INVALID 0 -#define CURSOR_VALID 1 +#define CURSOR_VALID 0 +#define CURSOR_INVALID 1 #define CURSOR_SKIPNEXT 2 #define CURSOR_REQUIRESEEK 3 #define CURSOR_FAULT 4 @@ -58747,10 +61916,10 @@ static void SQLITE_NOINLINE btreeEnterAll(sqlite3 *db){ skipOk = 0; } } - db->skipBtreeMutex = skipOk; + db->noSharedCache = skipOk; } SQLITE_PRIVATE void sqlite3BtreeEnterAll(sqlite3 *db){ - if( db->skipBtreeMutex==0 ) btreeEnterAll(db); + if( db->noSharedCache==0 ) btreeEnterAll(db); } static void SQLITE_NOINLINE btreeLeaveAll(sqlite3 *db){ int i; @@ -58762,7 +61931,7 @@ static void SQLITE_NOINLINE btreeLeaveAll(sqlite3 *db){ } } SQLITE_PRIVATE void sqlite3BtreeLeaveAll(sqlite3 *db){ - if( db->skipBtreeMutex==0 ) btreeLeaveAll(db); + if( db->noSharedCache==0 ) btreeLeaveAll(db); } #ifndef NDEBUG @@ -58975,6 +62144,34 @@ SQLITE_API int sqlite3_enable_shared_cache(int enable){ #define hasReadConflicts(a, b) 0 #endif +/* +** Implementation of the SQLITE_CORRUPT_PAGE() macro. Takes a single +** (MemPage*) as an argument. The (MemPage*) must not be NULL. +** +** If SQLITE_DEBUG is not defined, then this macro is equivalent to +** SQLITE_CORRUPT_BKPT. Or, if SQLITE_DEBUG is set, then the log message +** normally produced as a side-effect of SQLITE_CORRUPT_BKPT is augmented +** with the page number and filename associated with the (MemPage*). +*/ +#ifdef SQLITE_DEBUG +int corruptPageError(int lineno, MemPage *p){ + char *zMsg; + sqlite3BeginBenignMalloc(); + zMsg = sqlite3_mprintf("database corruption page %d of %s", + (int)p->pgno, sqlite3PagerFilename(p->pBt->pPager, 0) + ); + sqlite3EndBenignMalloc(); + if( zMsg ){ + sqlite3ReportError(SQLITE_CORRUPT, lineno, zMsg); + } + sqlite3_free(zMsg); + return SQLITE_CORRUPT_BKPT; +} +# define SQLITE_CORRUPT_PAGE(pMemPage) corruptPageError(__LINE__, pMemPage) +#else +# define SQLITE_CORRUPT_PAGE(pMemPage) SQLITE_CORRUPT_PGNO(pMemPage->pgno) +#endif + #ifndef SQLITE_OMIT_SHARED_CACHE #ifdef SQLITE_DEBUG @@ -59015,7 +62212,7 @@ static int hasSharedCacheTableLock( ** Return true immediately. */ if( (pBtree->sharable==0) - || (eLockType==READ_LOCK && (pBtree->db->flags & SQLITE_ReadUncommitted)) + || (eLockType==READ_LOCK && (pBtree->db->flags & SQLITE_ReadUncommit)) ){ return 1; } @@ -59092,7 +62289,7 @@ static int hasReadConflicts(Btree *pBtree, Pgno iRoot){ for(p=pBtree->pBt->pCursor; p; p=p->pNext){ if( p->pgnoRoot==iRoot && p->pBtree!=pBtree - && 0==(p->pBtree->db->flags & SQLITE_ReadUncommitted) + && 0==(p->pBtree->db->flags & SQLITE_ReadUncommit) ){ return 1; } @@ -59114,7 +62311,7 @@ static int querySharedCacheTableLock(Btree *p, Pgno iTab, u8 eLock){ assert( sqlite3BtreeHoldsMutex(p) ); assert( eLock==READ_LOCK || eLock==WRITE_LOCK ); assert( p->db!=0 ); - assert( !(p->db->flags&SQLITE_ReadUncommitted)||eLock==WRITE_LOCK||iTab==1 ); + assert( !(p->db->flags&SQLITE_ReadUncommit)||eLock==WRITE_LOCK||iTab==1 ); /* If requesting a write-lock, then the Btree must have an open write ** transaction on this file. And, obviously, for this to be so there @@ -59192,7 +62389,7 @@ static int setSharedCacheTableLock(Btree *p, Pgno iTable, u8 eLock){ ** obtain a read-lock using this function. The only read-lock obtained ** by a connection in read-uncommitted mode is on the sqlite_master ** table, and that lock is obtained in BtreeBeginTrans(). */ - assert( 0==(p->db->flags&SQLITE_ReadUncommitted) || eLock==WRITE_LOCK ); + assert( 0==(p->db->flags&SQLITE_ReadUncommit) || eLock==WRITE_LOCK ); /* This function should only be called on a sharable b-tree after it ** has been determined that no other b-tree holds a conflicting lock. */ @@ -59302,7 +62499,9 @@ static void downgradeAllSharedCacheTableLocks(Btree *p){ #endif /* SQLITE_OMIT_SHARED_CACHE */ -static void releasePage(MemPage *pPage); /* Forward reference */ +static void releasePage(MemPage *pPage); /* Forward reference */ +static void releasePageOne(MemPage *pPage); /* Forward reference */ +static void releasePageNotNull(MemPage *pPage); /* Forward reference */ /* ***** This routine is used inside of assert() only **** @@ -59362,6 +62561,7 @@ static void invalidateAllOverflowCache(BtShared *pBt){ */ static void invalidateIncrblobCursors( Btree *pBtree, /* The database file to check */ + Pgno pgnoRoot, /* The table that might be changing */ i64 iRow, /* The rowid that might be changing */ int isClearTable /* True if all rows are being deleted */ ){ @@ -59372,7 +62572,7 @@ static void invalidateIncrblobCursors( for(p=pBtree->pBt->pCursor; p; p=p->pNext){ if( (p->curFlags & BTCF_Incrblob)!=0 ){ pBtree->hasIncrblobCur = 1; - if( isClearTable || p->info.nKey==iRow ){ + if( p->pgnoRoot==pgnoRoot && (isClearTable || p->info.nKey==iRow) ){ p->eState = CURSOR_INVALID; } } @@ -59381,7 +62581,7 @@ static void invalidateIncrblobCursors( #else /* Stub function when INCRBLOB is omitted */ - #define invalidateIncrblobCursors(x,y,z) + #define invalidateIncrblobCursors(w,x,y,z) #endif /* SQLITE_OMIT_INCRBLOB */ /* @@ -59460,11 +62660,13 @@ static void btreeClearHasContent(BtShared *pBt){ */ static void btreeReleaseAllCursorPages(BtCursor *pCur){ int i; - for(i=0; i<=pCur->iPage; i++){ - releasePage(pCur->apPage[i]); - pCur->apPage[i] = 0; + if( pCur->iPage>=0 ){ + for(i=0; i<pCur->iPage; i++){ + releasePageNotNull(pCur->apPage[i]); + } + releasePageNotNull(pCur->pPage); + pCur->iPage = -1; } - pCur->iPage = -1; } /* @@ -59593,7 +62795,7 @@ static int SQLITE_NOINLINE saveCursorsOnList( return rc; } }else{ - testcase( p->iPage>0 ); + testcase( p->iPage>=0 ); btreeReleaseAllCursorPages(p); } } @@ -59694,7 +62896,22 @@ static int btreeRestoreCursorPosition(BtCursor *pCur){ ** back to where it ought to be if this routine returns true. */ SQLITE_PRIVATE int sqlite3BtreeCursorHasMoved(BtCursor *pCur){ - return pCur->eState!=CURSOR_VALID; + assert( EIGHT_BYTE_ALIGNMENT(pCur) + || pCur==sqlite3BtreeFakeValidCursor() ); + assert( offsetof(BtCursor, eState)==0 ); + assert( sizeof(pCur->eState)==1 ); + return CURSOR_VALID != *(u8*)pCur; +} + +/* +** Return a pointer to a fake BtCursor object that will always answer +** false to the sqlite3BtreeCursorHasMoved() routine above. The fake +** cursor returned must not be used with any other Btree interface. +*/ +SQLITE_PRIVATE BtCursor *sqlite3BtreeFakeValidCursor(void){ + static u8 fakeCursor = CURSOR_VALID; + assert( offsetof(BtCursor, eState)==0 ); + return (BtCursor*)&fakeCursor; } /* @@ -59862,7 +63079,7 @@ static int ptrmapGet(BtShared *pBt, Pgno key, u8 *pEType, Pgno *pPgno){ if( pPgno ) *pPgno = get4byte(&pPtrmap[offset+1]); sqlite3PagerUnref(pDbPage); - if( *pEType<1 || *pEType>5 ) return SQLITE_CORRUPT_BKPT; + if( *pEType<1 || *pEType>5 ) return SQLITE_CORRUPT_PGNO(iPtrmap); return SQLITE_OK; } @@ -60180,17 +63397,18 @@ static void ptrmapPutOvflPtr(MemPage *pPage, u8 *pCell, int *pRC){ /* -** Defragment the page given. All Cells are moved to the -** end of the page and all free space is collected into one -** big FreeBlk that occurs in between the header and cell -** pointer array and the cell content area. +** Defragment the page given. This routine reorganizes cells within the +** page so that there are no free-blocks on the free-block list. +** +** Parameter nMaxFrag is the maximum amount of fragmented space that may be +** present in the page after this routine returns. ** ** EVIDENCE-OF: R-44582-60138 SQLite may from time to time reorganize a ** b-tree page so that there are no freeblocks or fragment bytes, all ** unused bytes are contained in the unallocated space region, and all ** cells are packed tightly at the end of the page. */ -static int defragmentPage(MemPage *pPage){ +static int defragmentPage(MemPage *pPage, int nMaxFrag){ int i; /* Loop counter */ int pc; /* Address of the i-th cell */ int hdr; /* Offset to the page header */ @@ -60205,7 +63423,6 @@ static int defragmentPage(MemPage *pPage){ int iCellFirst; /* First allowable cell index */ int iCellLast; /* Last possible cell index */ - assert( sqlite3PagerIswriteable(pPage->pDbPage) ); assert( pPage->pBt!=0 ); assert( pPage->pBt->usableSize <= SQLITE_MAX_PAGE_SIZE ); @@ -60217,9 +63434,59 @@ static int defragmentPage(MemPage *pPage){ cellOffset = pPage->cellOffset; nCell = pPage->nCell; assert( nCell==get2byte(&data[hdr+3]) ); + iCellFirst = cellOffset + 2*nCell; usableSize = pPage->pBt->usableSize; + + /* This block handles pages with two or fewer free blocks and nMaxFrag + ** or fewer fragmented bytes. In this case it is faster to move the + ** two (or one) blocks of cells using memmove() and add the required + ** offsets to each pointer in the cell-pointer array than it is to + ** reconstruct the entire page. */ + if( (int)data[hdr+7]<=nMaxFrag ){ + int iFree = get2byte(&data[hdr+1]); + if( iFree ){ + int iFree2 = get2byte(&data[iFree]); + + /* pageFindSlot() has already verified that free blocks are sorted + ** in order of offset within the page, and that no block extends + ** past the end of the page. Provided the two free slots do not + ** overlap, this guarantees that the memmove() calls below will not + ** overwrite the usableSize byte buffer, even if the database page + ** is corrupt. */ + assert( iFree2==0 || iFree2>iFree ); + assert( iFree+get2byte(&data[iFree+2]) <= usableSize ); + assert( iFree2==0 || iFree2+get2byte(&data[iFree2+2]) <= usableSize ); + + if( 0==iFree2 || (data[iFree2]==0 && data[iFree2+1]==0) ){ + u8 *pEnd = &data[cellOffset + nCell*2]; + u8 *pAddr; + int sz2 = 0; + int sz = get2byte(&data[iFree+2]); + int top = get2byte(&data[hdr+5]); + if( top>=iFree ){ + return SQLITE_CORRUPT_PAGE(pPage); + } + if( iFree2 ){ + assert( iFree+sz<=iFree2 ); /* Verified by pageFindSlot() */ + sz2 = get2byte(&data[iFree2+2]); + assert( iFree+sz+sz2+iFree2-(iFree+sz) <= usableSize ); + memmove(&data[iFree+sz+sz2], &data[iFree+sz], iFree2-(iFree+sz)); + sz += sz2; + } + cbrk = top+sz; + assert( cbrk+(iFree-top) <= usableSize ); + memmove(&data[cbrk], &data[top], iFree-top); + for(pAddr=&data[cellOffset]; pAddr<pEnd; pAddr+=2){ + pc = get2byte(pAddr); + if( pc<iFree ){ put2byte(pAddr, pc+sz); } + else if( pc<iFree2 ){ put2byte(pAddr, pc+sz2); } + } + goto defragment_out; + } + } + } + cbrk = usableSize; - iCellFirst = cellOffset + 2*nCell; iCellLast = usableSize - 4; for(i=0; i<nCell; i++){ u8 *pAddr; /* The i-th cell pointer */ @@ -60231,13 +63498,13 @@ static int defragmentPage(MemPage *pPage){ ** if PRAGMA cell_size_check=ON. */ if( pc<iCellFirst || pc>iCellLast ){ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } assert( pc>=iCellFirst && pc<=iCellLast ); size = pPage->xCellSize(pPage, &src[pc]); cbrk -= size; if( cbrk<iCellFirst || pc+size>usableSize ){ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } assert( cbrk+size<=usableSize && cbrk>=iCellFirst ); testcase( cbrk+size==usableSize ); @@ -60253,16 +63520,18 @@ static int defragmentPage(MemPage *pPage){ } memcpy(&data[cbrk], &src[pc], size); } + data[hdr+7] = 0; + + defragment_out: + if( data[hdr+7]+cbrk-iCellFirst!=pPage->nFree ){ + return SQLITE_CORRUPT_PAGE(pPage); + } assert( cbrk>=iCellFirst ); put2byte(&data[hdr+5], cbrk); data[hdr+1] = 0; data[hdr+2] = 0; - data[hdr+7] = 0; memset(&data[iCellFirst], 0, cbrk-iCellFirst); assert( sqlite3PagerIswriteable(pPage->pDbPage) ); - if( cbrk-iCellFirst!=pPage->nFree ){ - return SQLITE_CORRUPT_BKPT; - } return SQLITE_OK; } @@ -60287,16 +63556,10 @@ static u8 *pageFindSlot(MemPage *pPg, int nByte, int *pRc){ int pc = get2byte(&aData[iAddr]); int x; int usableSize = pPg->pBt->usableSize; + int size; /* Size of the free slot */ assert( pc>0 ); - do{ - int size; /* Size of the free slot */ - /* EVIDENCE-OF: R-06866-39125 Freeblocks are always connected in order of - ** increasing offset. */ - if( pc>usableSize-4 || pc<iAddr+4 ){ - *pRc = SQLITE_CORRUPT_BKPT; - return 0; - } + while( pc<=usableSize-4 ){ /* EVIDENCE-OF: R-22710-53328 The third and fourth bytes of each ** freeblock form a big-endian integer which is the size of the freeblock ** in bytes, including the 4-byte header. */ @@ -60304,8 +63567,8 @@ static u8 *pageFindSlot(MemPage *pPg, int nByte, int *pRc){ if( (x = size - nByte)>=0 ){ testcase( x==4 ); testcase( x==3 ); - if( pc < pPg->cellOffset+2*pPg->nCell || size+pc > usableSize ){ - *pRc = SQLITE_CORRUPT_BKPT; + if( size+pc > usableSize ){ + *pRc = SQLITE_CORRUPT_PAGE(pPg); return 0; }else if( x<4 ){ /* EVIDENCE-OF: R-11498-58022 In a well-formed b-tree page, the total @@ -60325,7 +63588,11 @@ static u8 *pageFindSlot(MemPage *pPg, int nByte, int *pRc){ } iAddr = pc; pc = get2byte(&aData[pc]); - }while( pc ); + if( pc<iAddr+size ) break; + } + if( pc ){ + *pRc = SQLITE_CORRUPT_PAGE(pPg); + } return 0; } @@ -60372,7 +63639,7 @@ static int allocateSpace(MemPage *pPage, int nByte, int *pIdx){ if( top==0 && pPage->pBt->usableSize==65536 ){ top = 65536; }else{ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } } @@ -60400,10 +63667,10 @@ static int allocateSpace(MemPage *pPage, int nByte, int *pIdx){ testcase( gap+2+nByte==top ); if( gap+2+nByte>top ){ assert( pPage->nCell>0 || CORRUPT_DB ); - rc = defragmentPage(pPage); + rc = defragmentPage(pPage, MIN(4, pPage->nFree - (2+nByte))); if( rc ) return rc; top = get2byteNotZero(&data[hdr+5]); - assert( gap+nByte<=top ); + assert( gap+2+nByte<=top ); } @@ -60439,7 +63706,7 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ u8 hdr; /* Page header size. 0 or 100 */ u8 nFrag = 0; /* Reduction in fragmentation */ u16 iOrigSize = iSize; /* Original value of iSize */ - u32 iLast = pPage->pBt->usableSize-4; /* Largest possible freeblock offset */ + u16 x; /* Offset to cell content area */ u32 iEnd = iStart + iSize; /* First byte past the iStart buffer */ unsigned char *data = pPage->aData; /* Page content */ @@ -60449,13 +63716,7 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ assert( CORRUPT_DB || iEnd <= pPage->pBt->usableSize ); assert( sqlite3_mutex_held(pPage->pBt->mutex) ); assert( iSize>=4 ); /* Minimum cell size is 4 */ - assert( iStart<=iLast ); - - /* Overwrite deleted information with zeros when the secure_delete - ** option is enabled */ - if( pPage->pBt->btsFlags & BTS_SECURE_DELETE ){ - memset(&data[iStart], 0, iSize); - } + assert( iStart<=pPage->pBt->usableSize-4 ); /* The list of freeblocks must be in ascending order. Find the ** spot on the list where iStart should be inserted. @@ -60468,11 +63729,13 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ while( (iFreeBlk = get2byte(&data[iPtr]))<iStart ){ if( iFreeBlk<iPtr+4 ){ if( iFreeBlk==0 ) break; - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } iPtr = iFreeBlk; } - if( iFreeBlk>iLast ) return SQLITE_CORRUPT_BKPT; + if( iFreeBlk>pPage->pBt->usableSize-4 ){ + return SQLITE_CORRUPT_PAGE(pPage); + } assert( iFreeBlk>iPtr || iFreeBlk==0 ); /* At this point: @@ -60483,9 +63746,11 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ */ if( iFreeBlk && iEnd+3>=iFreeBlk ){ nFrag = iFreeBlk - iEnd; - if( iEnd>iFreeBlk ) return SQLITE_CORRUPT_BKPT; + if( iEnd>iFreeBlk ) return SQLITE_CORRUPT_PAGE(pPage); iEnd = iFreeBlk + get2byte(&data[iFreeBlk+2]); - if( iEnd > pPage->pBt->usableSize ) return SQLITE_CORRUPT_BKPT; + if( iEnd > pPage->pBt->usableSize ){ + return SQLITE_CORRUPT_PAGE(pPage); + } iSize = iEnd - iStart; iFreeBlk = get2byte(&data[iFreeBlk]); } @@ -60497,28 +63762,34 @@ static int freeSpace(MemPage *pPage, u16 iStart, u16 iSize){ if( iPtr>hdr+1 ){ int iPtrEnd = iPtr + get2byte(&data[iPtr+2]); if( iPtrEnd+3>=iStart ){ - if( iPtrEnd>iStart ) return SQLITE_CORRUPT_BKPT; + if( iPtrEnd>iStart ) return SQLITE_CORRUPT_PAGE(pPage); nFrag += iStart - iPtrEnd; iSize = iEnd - iPtr; iStart = iPtr; } } - if( nFrag>data[hdr+7] ) return SQLITE_CORRUPT_BKPT; + if( nFrag>data[hdr+7] ) return SQLITE_CORRUPT_PAGE(pPage); data[hdr+7] -= nFrag; } - if( iStart==get2byte(&data[hdr+5]) ){ + x = get2byte(&data[hdr+5]); + if( iStart<=x ){ /* The new freeblock is at the beginning of the cell content area, ** so just extend the cell content area rather than create another ** freelist entry */ - if( iPtr!=hdr+1 ) return SQLITE_CORRUPT_BKPT; + if( iStart<x || iPtr!=hdr+1 ) return SQLITE_CORRUPT_PAGE(pPage); put2byte(&data[hdr+1], iFreeBlk); put2byte(&data[hdr+5], iEnd); }else{ /* Insert the new freeblock into the freelist */ put2byte(&data[iPtr], iStart); - put2byte(&data[iStart], iFreeBlk); - put2byte(&data[iStart+2], iSize); } + if( pPage->pBt->btsFlags & BTS_FAST_SECURE ){ + /* Overwrite deleted information with zeros when the secure_delete + ** option is enabled */ + memset(&data[iStart], 0, iSize); + } + put2byte(&data[iStart], iFreeBlk); + put2byte(&data[iStart+2], iSize); pPage->nFree += iOrigSize; return SQLITE_OK; } @@ -60578,7 +63849,7 @@ static int decodeFlags(MemPage *pPage, int flagByte){ }else{ /* EVIDENCE-OF: R-47608-56469 Any other value for the b-tree page type is ** an error. */ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } pPage->max1bytePayload = pBt->max1bytePayload; return SQLITE_OK; @@ -60594,6 +63865,16 @@ static int decodeFlags(MemPage *pPage, int flagByte){ ** we failed to detect any corruption. */ static int btreeInitPage(MemPage *pPage){ + int pc; /* Address of a freeblock within pPage->aData[] */ + u8 hdr; /* Offset to beginning of page header */ + u8 *data; /* Equal to pPage->aData */ + BtShared *pBt; /* The main btree structure */ + int usableSize; /* Amount of usable space on each page */ + u16 cellOffset; /* Offset from start of page to first cell pointer */ + int nFree; /* Number of unused bytes on the page */ + int top; /* First byte of the cell content area */ + int iCellFirst; /* First allowable cell or freeblock offset */ + int iCellLast; /* Last possible cell or freeblock offset */ assert( pPage->pBt!=0 ); assert( pPage->pBt->db!=0 ); @@ -60601,127 +63882,119 @@ static int btreeInitPage(MemPage *pPage){ assert( pPage->pgno==sqlite3PagerPagenumber(pPage->pDbPage) ); assert( pPage == sqlite3PagerGetExtra(pPage->pDbPage) ); assert( pPage->aData == sqlite3PagerGetData(pPage->pDbPage) ); + assert( pPage->isInit==0 ); - if( !pPage->isInit ){ - int pc; /* Address of a freeblock within pPage->aData[] */ - u8 hdr; /* Offset to beginning of page header */ - u8 *data; /* Equal to pPage->aData */ - BtShared *pBt; /* The main btree structure */ - int usableSize; /* Amount of usable space on each page */ - u16 cellOffset; /* Offset from start of page to first cell pointer */ - int nFree; /* Number of unused bytes on the page */ - int top; /* First byte of the cell content area */ - int iCellFirst; /* First allowable cell or freeblock offset */ - int iCellLast; /* Last possible cell or freeblock offset */ - - pBt = pPage->pBt; - - hdr = pPage->hdrOffset; - data = pPage->aData; - /* EVIDENCE-OF: R-28594-02890 The one-byte flag at offset 0 indicating - ** the b-tree page type. */ - if( decodeFlags(pPage, data[hdr]) ) return SQLITE_CORRUPT_BKPT; - assert( pBt->pageSize>=512 && pBt->pageSize<=65536 ); - pPage->maskPage = (u16)(pBt->pageSize - 1); - pPage->nOverflow = 0; - usableSize = pBt->usableSize; - pPage->cellOffset = cellOffset = hdr + 8 + pPage->childPtrSize; - pPage->aDataEnd = &data[usableSize]; - pPage->aCellIdx = &data[cellOffset]; - pPage->aDataOfst = &data[pPage->childPtrSize]; - /* EVIDENCE-OF: R-58015-48175 The two-byte integer at offset 5 designates - ** the start of the cell content area. A zero value for this integer is - ** interpreted as 65536. */ - top = get2byteNotZero(&data[hdr+5]); - /* EVIDENCE-OF: R-37002-32774 The two-byte integer at offset 3 gives the - ** number of cells on the page. */ - pPage->nCell = get2byte(&data[hdr+3]); - if( pPage->nCell>MX_CELL(pBt) ){ - /* To many cells for a single page. The page must be corrupt */ - return SQLITE_CORRUPT_BKPT; - } - testcase( pPage->nCell==MX_CELL(pBt) ); - /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only - ** possible for a root page of a table that contains no rows) then the - ** offset to the cell content area will equal the page size minus the - ** bytes of reserved space. */ - assert( pPage->nCell>0 || top==usableSize || CORRUPT_DB ); - - /* A malformed database page might cause us to read past the end - ** of page when parsing a cell. - ** - ** The following block of code checks early to see if a cell extends - ** past the end of a page boundary and causes SQLITE_CORRUPT to be - ** returned if it does. - */ - iCellFirst = cellOffset + 2*pPage->nCell; - iCellLast = usableSize - 4; - if( pBt->db->flags & SQLITE_CellSizeCk ){ - int i; /* Index into the cell pointer array */ - int sz; /* Size of a cell */ - - if( !pPage->leaf ) iCellLast--; - for(i=0; i<pPage->nCell; i++){ - pc = get2byteAligned(&data[cellOffset+i*2]); - testcase( pc==iCellFirst ); - testcase( pc==iCellLast ); - if( pc<iCellFirst || pc>iCellLast ){ - return SQLITE_CORRUPT_BKPT; - } - sz = pPage->xCellSize(pPage, &data[pc]); - testcase( pc+sz==usableSize ); - if( pc+sz>usableSize ){ - return SQLITE_CORRUPT_BKPT; - } - } - if( !pPage->leaf ) iCellLast++; - } + pBt = pPage->pBt; + hdr = pPage->hdrOffset; + data = pPage->aData; + /* EVIDENCE-OF: R-28594-02890 The one-byte flag at offset 0 indicating + ** the b-tree page type. */ + if( decodeFlags(pPage, data[hdr]) ){ + return SQLITE_CORRUPT_PAGE(pPage); + } + assert( pBt->pageSize>=512 && pBt->pageSize<=65536 ); + pPage->maskPage = (u16)(pBt->pageSize - 1); + pPage->nOverflow = 0; + usableSize = pBt->usableSize; + pPage->cellOffset = cellOffset = hdr + 8 + pPage->childPtrSize; + pPage->aDataEnd = &data[usableSize]; + pPage->aCellIdx = &data[cellOffset]; + pPage->aDataOfst = &data[pPage->childPtrSize]; + /* EVIDENCE-OF: R-58015-48175 The two-byte integer at offset 5 designates + ** the start of the cell content area. A zero value for this integer is + ** interpreted as 65536. */ + top = get2byteNotZero(&data[hdr+5]); + /* EVIDENCE-OF: R-37002-32774 The two-byte integer at offset 3 gives the + ** number of cells on the page. */ + pPage->nCell = get2byte(&data[hdr+3]); + if( pPage->nCell>MX_CELL(pBt) ){ + /* To many cells for a single page. The page must be corrupt */ + return SQLITE_CORRUPT_PAGE(pPage); + } + testcase( pPage->nCell==MX_CELL(pBt) ); + /* EVIDENCE-OF: R-24089-57979 If a page contains no cells (which is only + ** possible for a root page of a table that contains no rows) then the + ** offset to the cell content area will equal the page size minus the + ** bytes of reserved space. */ + assert( pPage->nCell>0 || top==usableSize || CORRUPT_DB ); + + /* A malformed database page might cause us to read past the end + ** of page when parsing a cell. + ** + ** The following block of code checks early to see if a cell extends + ** past the end of a page boundary and causes SQLITE_CORRUPT to be + ** returned if it does. + */ + iCellFirst = cellOffset + 2*pPage->nCell; + iCellLast = usableSize - 4; + if( pBt->db->flags & SQLITE_CellSizeCk ){ + int i; /* Index into the cell pointer array */ + int sz; /* Size of a cell */ - /* Compute the total free space on the page - ** EVIDENCE-OF: R-23588-34450 The two-byte integer at offset 1 gives the - ** start of the first freeblock on the page, or is zero if there are no - ** freeblocks. */ - pc = get2byte(&data[hdr+1]); - nFree = data[hdr+7] + top; /* Init nFree to non-freeblock free space */ - if( pc>0 ){ - u32 next, size; - if( pc<iCellFirst ){ - /* EVIDENCE-OF: R-55530-52930 In a well-formed b-tree page, there will - ** always be at least one cell before the first freeblock. - */ - return SQLITE_CORRUPT_BKPT; - } - while( 1 ){ - if( pc>iCellLast ){ - return SQLITE_CORRUPT_BKPT; /* Freeblock off the end of the page */ - } - next = get2byte(&data[pc]); - size = get2byte(&data[pc+2]); - nFree = nFree + size; - if( next<=pc+size+3 ) break; - pc = next; + if( !pPage->leaf ) iCellLast--; + for(i=0; i<pPage->nCell; i++){ + pc = get2byteAligned(&data[cellOffset+i*2]); + testcase( pc==iCellFirst ); + testcase( pc==iCellLast ); + if( pc<iCellFirst || pc>iCellLast ){ + return SQLITE_CORRUPT_PAGE(pPage); } - if( next>0 ){ - return SQLITE_CORRUPT_BKPT; /* Freeblock not in ascending order */ - } - if( pc+size>(unsigned int)usableSize ){ - return SQLITE_CORRUPT_BKPT; /* Last freeblock extends past page end */ + sz = pPage->xCellSize(pPage, &data[pc]); + testcase( pc+sz==usableSize ); + if( pc+sz>usableSize ){ + return SQLITE_CORRUPT_PAGE(pPage); } } + if( !pPage->leaf ) iCellLast++; + } - /* At this point, nFree contains the sum of the offset to the start - ** of the cell-content area plus the number of free bytes within - ** the cell-content area. If this is greater than the usable-size - ** of the page, then the page must be corrupted. This check also - ** serves to verify that the offset to the start of the cell-content - ** area, according to the page header, lies within the page. - */ - if( nFree>usableSize ){ - return SQLITE_CORRUPT_BKPT; + /* Compute the total free space on the page + ** EVIDENCE-OF: R-23588-34450 The two-byte integer at offset 1 gives the + ** start of the first freeblock on the page, or is zero if there are no + ** freeblocks. */ + pc = get2byte(&data[hdr+1]); + nFree = data[hdr+7] + top; /* Init nFree to non-freeblock free space */ + if( pc>0 ){ + u32 next, size; + if( pc<iCellFirst ){ + /* EVIDENCE-OF: R-55530-52930 In a well-formed b-tree page, there will + ** always be at least one cell before the first freeblock. + */ + return SQLITE_CORRUPT_PAGE(pPage); + } + while( 1 ){ + if( pc>iCellLast ){ + /* Freeblock off the end of the page */ + return SQLITE_CORRUPT_PAGE(pPage); + } + next = get2byte(&data[pc]); + size = get2byte(&data[pc+2]); + nFree = nFree + size; + if( next<=pc+size+3 ) break; + pc = next; + } + if( next>0 ){ + /* Freeblock not in ascending order */ + return SQLITE_CORRUPT_PAGE(pPage); + } + if( pc+size>(unsigned int)usableSize ){ + /* Last freeblock extends past page end */ + return SQLITE_CORRUPT_PAGE(pPage); } - pPage->nFree = (u16)(nFree - iCellFirst); - pPage->isInit = 1; } + + /* At this point, nFree contains the sum of the offset to the start + ** of the cell-content area plus the number of free bytes within + ** the cell-content area. If this is greater than the usable-size + ** of the page, then the page must be corrupted. This check also + ** serves to verify that the offset to the start of the cell-content + ** area, according to the page header, lies within the page. + */ + if( nFree>usableSize ){ + return SQLITE_CORRUPT_PAGE(pPage); + } + pPage->nFree = (u16)(nFree - iCellFirst); + pPage->isInit = 1; return SQLITE_OK; } @@ -60740,7 +64013,7 @@ static void zeroPage(MemPage *pPage, int flags){ assert( sqlite3PagerGetData(pPage->pDbPage) == data ); assert( sqlite3PagerIswriteable(pPage->pDbPage) ); assert( sqlite3_mutex_held(pBt->mutex) ); - if( pBt->btsFlags & BTS_SECURE_DELETE ){ + if( pBt->btsFlags & BTS_FAST_SECURE ){ memset(&data[hdr], 0, pBt->usableSize - hdr); } data[hdr] = (char)flags; @@ -60831,7 +64104,7 @@ static Pgno btreePagecount(BtShared *pBt){ } SQLITE_PRIVATE u32 sqlite3BtreeLastPage(Btree *p){ assert( sqlite3BtreeHoldsMutex(p) ); - assert( ((p->pBt->nPage)&0x8000000)==0 ); + assert( ((p->pBt->nPage)&0x80000000)==0 ); return btreePagecount(p->pBt); } @@ -60858,7 +64131,7 @@ static int getAndInitPage( int rc; DbPage *pDbPage; assert( sqlite3_mutex_held(pBt->mutex) ); - assert( pCur==0 || ppPage==&pCur->apPage[pCur->iPage] ); + assert( pCur==0 || ppPage==&pCur->pPage ); assert( pCur==0 || bReadOnly==pCur->curPagerFlags ); assert( pCur==0 || pCur->iPage>0 ); @@ -60885,14 +64158,17 @@ static int getAndInitPage( /* If obtaining a child page for a cursor, we must verify that the page is ** compatible with the root page. */ if( pCur && ((*ppPage)->nCell<1 || (*ppPage)->intKey!=pCur->curIntKey) ){ - rc = SQLITE_CORRUPT_BKPT; + rc = SQLITE_CORRUPT_PGNO(pgno); releasePage(*ppPage); goto getAndInitPage_error; } return SQLITE_OK; getAndInitPage_error: - if( pCur ) pCur->iPage--; + if( pCur ){ + pCur->iPage--; + pCur->pPage = pCur->apPage[pCur->iPage]; + } testcase( pgno==0 ); assert( pgno!=0 || rc==SQLITE_CORRUPT ); return rc; @@ -60901,6 +64177,8 @@ getAndInitPage_error: /* ** Release a MemPage. This should be called once for each prior ** call to btreeGetPage. +** +** Page1 is a special case and must be released using releasePageOne(). */ static void releasePageNotNull(MemPage *pPage){ assert( pPage->aData ); @@ -60914,6 +64192,16 @@ static void releasePageNotNull(MemPage *pPage){ static void releasePage(MemPage *pPage){ if( pPage ) releasePageNotNull(pPage); } +static void releasePageOne(MemPage *pPage){ + assert( pPage!=0 ); + assert( pPage->aData ); + assert( pPage->pBt ); + assert( pPage->pDbPage!=0 ); + assert( sqlite3PagerGetExtra(pPage->pDbPage) == (void*)pPage ); + assert( sqlite3PagerGetData(pPage->pDbPage)==pPage->aData ); + assert( sqlite3_mutex_held(pPage->pBt->mutex) ); + sqlite3PagerUnrefPageOne(pPage->pDbPage); +} /* ** Get an unused page. @@ -60979,7 +64267,8 @@ static int btreeInvokeBusyHandler(void *pArg){ BtShared *pBt = (BtShared*)pArg; assert( pBt->db ); assert( sqlite3_mutex_held(pBt->db->mutex) ); - return sqlite3InvokeBusyHandler(&pBt->db->busyHandler); + return sqlite3InvokeBusyHandler(&pBt->db->busyHandler, + sqlite3PagerFile(pBt->pPager)); } /* @@ -61157,14 +64446,16 @@ SQLITE_PRIVATE int sqlite3BtreeOpen( } pBt->openFlags = (u8)flags; pBt->db = db; - sqlite3PagerSetBusyhandler(pBt->pPager, btreeInvokeBusyHandler, pBt); + sqlite3PagerSetBusyHandler(pBt->pPager, btreeInvokeBusyHandler, pBt); p->pBt = pBt; pBt->pCursor = 0; pBt->pPage1 = 0; if( sqlite3PagerIsreadonly(pBt->pPager) ) pBt->btsFlags |= BTS_READ_ONLY; -#ifdef SQLITE_SECURE_DELETE +#if defined(SQLITE_SECURE_DELETE) pBt->btsFlags |= BTS_SECURE_DELETE; +#elif defined(SQLITE_FAST_SECURE_DELETE) + pBt->btsFlags |= BTS_OVERWRITE; #endif /* EVIDENCE-OF: R-51873-39618 The page size for a database file is ** determined by the 2-byte integer located at an offset of 16 bytes from @@ -61612,19 +64903,34 @@ SQLITE_PRIVATE int sqlite3BtreeMaxPageCount(Btree *p, int mxPage){ } /* -** Set the BTS_SECURE_DELETE flag if newFlag is 0 or 1. If newFlag is -1, -** then make no changes. Always return the value of the BTS_SECURE_DELETE -** setting after the change. +** Change the values for the BTS_SECURE_DELETE and BTS_OVERWRITE flags: +** +** newFlag==0 Both BTS_SECURE_DELETE and BTS_OVERWRITE are cleared +** newFlag==1 BTS_SECURE_DELETE set and BTS_OVERWRITE is cleared +** newFlag==2 BTS_SECURE_DELETE cleared and BTS_OVERWRITE is set +** newFlag==(-1) No changes +** +** This routine acts as a query if newFlag is less than zero +** +** With BTS_OVERWRITE set, deleted content is overwritten by zeros, but +** freelist leaf pages are not written back to the database. Thus in-page +** deleted content is cleared, but freelist deleted content is not. +** +** With BTS_SECURE_DELETE, operation is like BTS_OVERWRITE with the addition +** that freelist leaf pages are written back into the database, increasing +** the amount of disk I/O. */ SQLITE_PRIVATE int sqlite3BtreeSecureDelete(Btree *p, int newFlag){ int b; if( p==0 ) return 0; sqlite3BtreeEnter(p); + assert( BTS_OVERWRITE==BTS_SECURE_DELETE*2 ); + assert( BTS_FAST_SECURE==(BTS_OVERWRITE|BTS_SECURE_DELETE) ); if( newFlag>=0 ){ - p->pBt->btsFlags &= ~BTS_SECURE_DELETE; - if( newFlag ) p->pBt->btsFlags |= BTS_SECURE_DELETE; - } - b = (p->pBt->btsFlags & BTS_SECURE_DELETE)!=0; + p->pBt->btsFlags &= ~BTS_FAST_SECURE; + p->pBt->btsFlags |= BTS_SECURE_DELETE*newFlag; + } + b = (p->pBt->btsFlags & BTS_FAST_SECURE)/BTS_SECURE_DELETE; sqlite3BtreeLeave(p); return b; } @@ -61675,6 +64981,36 @@ SQLITE_PRIVATE int sqlite3BtreeGetAutoVacuum(Btree *p){ #endif } +/* +** If the user has not set the safety-level for this database connection +** using "PRAGMA synchronous", and if the safety-level is not already +** set to the value passed to this function as the second parameter, +** set it so. +*/ +#if SQLITE_DEFAULT_SYNCHRONOUS!=SQLITE_DEFAULT_WAL_SYNCHRONOUS \ + && !defined(SQLITE_OMIT_WAL) +static void setDefaultSyncFlag(BtShared *pBt, u8 safety_level){ + sqlite3 *db; + Db *pDb; + if( (db=pBt->db)!=0 && (pDb=db->aDb)!=0 ){ + while( pDb->pBt==0 || pDb->pBt->pBt!=pBt ){ pDb++; } + if( pDb->bSyncSet==0 + && pDb->safety_level!=safety_level + && pDb!=&db->aDb[1] + ){ + pDb->safety_level = safety_level; + sqlite3PagerSetFlags(pBt->pPager, + pDb->safety_level | (db->flags & PAGER_FLAGS_MASK)); + } + } +} +#else +# define setDefaultSyncFlag(pBt,safety_level) +#endif + +/* Forward declaration */ +static int newDatabase(BtShared*); + /* ** Get a reference to pPage1 of the database file. This will @@ -61707,6 +65043,9 @@ static int lockBtree(BtShared *pBt){ if( nPage==0 || memcmp(24+(u8*)pPage1->aData, 92+(u8*)pPage1->aData,4)!=0 ){ nPage = nPageFile; } + if( (pBt->db->flags & SQLITE_ResetDatabase)!=0 ){ + nPage = 0; + } if( nPage>0 ){ u32 pageSize; u32 usableSize; @@ -61748,26 +65087,15 @@ static int lockBtree(BtShared *pBt){ if( rc!=SQLITE_OK ){ goto page1_init_failed; }else{ -#if SQLITE_DEFAULT_SYNCHRONOUS!=SQLITE_DEFAULT_WAL_SYNCHRONOUS - sqlite3 *db; - Db *pDb; - if( (db=pBt->db)!=0 && (pDb=db->aDb)!=0 ){ - while( pDb->pBt==0 || pDb->pBt->pBt!=pBt ){ pDb++; } - if( pDb->bSyncSet==0 - && pDb->safety_level==SQLITE_DEFAULT_SYNCHRONOUS+1 - ){ - pDb->safety_level = SQLITE_DEFAULT_WAL_SYNCHRONOUS+1; - sqlite3PagerSetFlags(pBt->pPager, - pDb->safety_level | (db->flags & PAGER_FLAGS_MASK)); - } - } -#endif + setDefaultSyncFlag(pBt, SQLITE_DEFAULT_WAL_SYNCHRONOUS+1); if( isOpen==0 ){ - releasePage(pPage1); + releasePageOne(pPage1); return SQLITE_OK; } } rc = SQLITE_NOTADB; + }else{ + setDefaultSyncFlag(pBt, SQLITE_DEFAULT_SYNCHRONOUS+1); } #endif @@ -61808,7 +65136,7 @@ static int lockBtree(BtShared *pBt){ ** zero and return SQLITE_OK. The caller will call this function ** again with the correct page-size. */ - releasePage(pPage1); + releasePageOne(pPage1); pBt->usableSize = usableSize; pBt->pageSize = pageSize; freeTempSpace(pBt); @@ -61816,7 +65144,7 @@ static int lockBtree(BtShared *pBt){ pageSize-usableSize); return rc; } - if( (pBt->db->flags & SQLITE_RecoveryMode)==0 && nPage>nPageFile ){ + if( (pBt->db->flags & SQLITE_WriteSchema)==0 && nPage>nPageFile ){ rc = SQLITE_CORRUPT_BKPT; goto page1_init_failed; } @@ -61862,7 +65190,7 @@ static int lockBtree(BtShared *pBt){ return SQLITE_OK; page1_init_failed: - releasePage(pPage1); + releasePageOne(pPage1); pBt->pPage1 = 0; return rc; } @@ -61907,7 +65235,7 @@ static void unlockBtreeIfUnused(BtShared *pBt){ assert( pPage1->aData ); assert( sqlite3PagerRefcount(pBt->pPager)==1 ); pBt->pPage1 = 0; - releasePageNotNull(pPage1); + releasePageOne(pPage1); } } @@ -62088,6 +65416,7 @@ SQLITE_PRIVATE int sqlite3BtreeBeginTrans(Btree *p, int wrflag){ } }while( (rc&0xFF)==SQLITE_BUSY && pBt->inTransaction==TRANS_NONE && btreeInvokeBusyHandler(pBt) ); + sqlite3PagerResetLockTimeout(pBt->pPager); if( rc==SQLITE_OK ){ if( p->inTrans==TRANS_NONE ){ @@ -62159,7 +65488,7 @@ static int setChildPtrmaps(MemPage *pPage){ Pgno pgno = pPage->pgno; assert( sqlite3_mutex_held(pPage->pBt->mutex) ); - rc = btreeInitPage(pPage); + rc = pPage->isInit ? SQLITE_OK : btreeInitPage(pPage); if( rc!=SQLITE_OK ) return rc; nCell = pPage->nCell; @@ -62202,7 +65531,7 @@ static int modifyPagePointer(MemPage *pPage, Pgno iFrom, Pgno iTo, u8 eType){ if( eType==PTRMAP_OVERFLOW2 ){ /* The pointer is always the first 4 bytes of the page in this case. */ if( get4byte(pPage->aData)!=iFrom ){ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } put4byte(pPage->aData, iTo); }else{ @@ -62210,7 +65539,7 @@ static int modifyPagePointer(MemPage *pPage, Pgno iFrom, Pgno iTo, u8 eType){ int nCell; int rc; - rc = btreeInitPage(pPage); + rc = pPage->isInit ? SQLITE_OK : btreeInitPage(pPage); if( rc ) return rc; nCell = pPage->nCell; @@ -62221,7 +65550,7 @@ static int modifyPagePointer(MemPage *pPage, Pgno iFrom, Pgno iTo, u8 eType){ pPage->xParseCell(pPage, pCell, &info); if( info.nLocal<info.nPayload ){ if( pCell+info.nSize > pPage->aData+pPage->pBt->usableSize ){ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } if( iFrom==get4byte(pCell+info.nSize-4) ){ put4byte(pCell+info.nSize-4, iTo); @@ -62239,7 +65568,7 @@ static int modifyPagePointer(MemPage *pPage, Pgno iFrom, Pgno iTo, u8 eType){ if( i==nCell ){ if( eType!=PTRMAP_BTREE || get4byte(&pPage->aData[pPage->hdrOffset+8])!=iFrom ){ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } put4byte(&pPage->aData[pPage->hdrOffset+8], iTo); } @@ -62759,7 +66088,6 @@ SQLITE_PRIVATE int sqlite3BtreeTripAllCursors(Btree *pBtree, int errCode, int wr if( pBtree ){ sqlite3BtreeEnter(pBtree); for(p=pBtree->pBt->pCursor; p; p=p->pNext){ - int i; if( writeOnly && (p->curFlags & BTCF_WriteFlag)==0 ){ if( p->eState==CURSOR_VALID || p->eState==CURSOR_SKIPNEXT ){ rc = saveCursorPosition(p); @@ -62773,10 +66101,7 @@ SQLITE_PRIVATE int sqlite3BtreeTripAllCursors(Btree *pBtree, int errCode, int wr p->eState = CURSOR_FAULT; p->skipNext = errCode; } - for(i=0; i<=p->iPage; i++){ - releasePage(p->apPage[i]); - p->apPage[i] = 0; - } + btreeReleaseAllCursorPages(p); } sqlite3BtreeLeave(pBtree); } @@ -62833,7 +66158,7 @@ SQLITE_PRIVATE int sqlite3BtreeRollback(Btree *p, int tripCode, int writeOnly){ if( nPage==0 ) sqlite3PagerPagecount(pBt->pPager, &nPage); testcase( pBt->nPage!=nPage ); pBt->nPage = nPage; - releasePage(pPage1); + releasePageOne(pPage1); } assert( countValidCursors(pBt, 1)==0 ); pBt->inTransaction = TRANS_READ; @@ -63065,7 +66390,7 @@ SQLITE_PRIVATE int sqlite3BtreeCursorSize(void){ ** of run-time by skipping the initialization of those elements. */ SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor *p){ - memset(p, 0, offsetof(BtCursor, iPage)); + memset(p, 0, offsetof(BtCursor, BTCURSOR_FIRST_UNINIT)); } /* @@ -63075,10 +66400,8 @@ SQLITE_PRIVATE void sqlite3BtreeCursorZero(BtCursor *p){ SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){ Btree *pBtree = pCur->pBtree; if( pBtree ){ - int i; BtShared *pBt = pCur->pBt; sqlite3BtreeEnter(pBtree); - sqlite3BtreeClearCursor(pCur); assert( pBt->pCursor!=0 ); if( pBt->pCursor==pCur ){ pBt->pCursor = pCur->pNext; @@ -63092,12 +66415,10 @@ SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){ pPrev = pPrev->pNext; }while( ALWAYS(pPrev) ); } - for(i=0; i<=pCur->iPage; i++){ - releasePage(pCur->apPage[i]); - } + btreeReleaseAllCursorPages(pCur); unlockBtreeIfUnused(pBt); sqlite3_free(pCur->aOverflow); - /* sqlite3_free(pCur); */ + sqlite3_free(pCur->pKey); sqlite3BtreeLeave(pBtree); } return SQLITE_OK; @@ -63112,21 +66433,27 @@ SQLITE_PRIVATE int sqlite3BtreeCloseCursor(BtCursor *pCur){ ** Using this cache reduces the number of calls to btreeParseCell(). */ #ifndef NDEBUG + static int cellInfoEqual(CellInfo *a, CellInfo *b){ + if( a->nKey!=b->nKey ) return 0; + if( a->pPayload!=b->pPayload ) return 0; + if( a->nPayload!=b->nPayload ) return 0; + if( a->nLocal!=b->nLocal ) return 0; + if( a->nSize!=b->nSize ) return 0; + return 1; + } static void assertCellInfo(BtCursor *pCur){ CellInfo info; - int iPage = pCur->iPage; memset(&info, 0, sizeof(info)); - btreeParseCell(pCur->apPage[iPage], pCur->aiIdx[iPage], &info); - assert( CORRUPT_DB || memcmp(&info, &pCur->info, sizeof(info))==0 ); + btreeParseCell(pCur->pPage, pCur->ix, &info); + assert( CORRUPT_DB || cellInfoEqual(&info, &pCur->info) ); } #else #define assertCellInfo(x) #endif static SQLITE_NOINLINE void getCellInfo(BtCursor *pCur){ if( pCur->info.nSize==0 ){ - int iPage = pCur->iPage; pCur->curFlags |= BTCF_ValidNKey; - btreeParseCell(pCur->apPage[iPage],pCur->aiIdx[iPage],&pCur->info); + btreeParseCell(pCur->pPage,pCur->ix,&pCur->info); }else{ assertCellInfo(pCur); } @@ -63161,6 +66488,20 @@ SQLITE_PRIVATE i64 sqlite3BtreeIntegerKey(BtCursor *pCur){ return pCur->info.nKey; } +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC +/* +** Return the offset into the database file for the start of the +** payload to which the cursor is pointing. +*/ +SQLITE_PRIVATE i64 sqlite3BtreeOffset(BtCursor *pCur){ + assert( cursorHoldsMutex(pCur) ); + assert( pCur->eState==CURSOR_VALID ); + getCellInfo(pCur); + return (i64)pCur->pBt->pageSize*((i64)pCur->pPage->pgno - 1) + + (i64)(pCur->info.pPayload - pCur->pPage->aData); +} +#endif /* SQLITE_ENABLE_OFFSET_SQL_FUNC */ + /* ** Return the number of bytes of payload for the entry that pCur is ** currently pointing to. For table btrees, this will be the amount @@ -63324,7 +66665,7 @@ static int accessPayload( unsigned char *aPayload; int rc = SQLITE_OK; int iIdx = 0; - MemPage *pPage = pCur->apPage[pCur->iPage]; /* Btree page of current entry */ + MemPage *pPage = pCur->pPage; /* Btree page of current entry */ BtShared *pBt = pCur->pBt; /* Btree this cursor belongs to */ #ifdef SQLITE_DIRECT_OVERFLOW_READ unsigned char * const pBufStart = pBuf; /* Start of original out buffer */ @@ -63333,7 +66674,7 @@ static int accessPayload( assert( pPage ); assert( eOp==0 || eOp==1 ); assert( pCur->eState==CURSOR_VALID ); - assert( pCur->aiIdx[pCur->iPage]<pPage->nCell ); + assert( pCur->ix<pPage->nCell ); assert( cursorHoldsMutex(pCur) ); getCellInfo(pCur); @@ -63347,7 +66688,7 @@ static int accessPayload( ** &aPayload[pCur->info.nLocal] > &pPage->aData[pBt->usableSize] ** but is recast into its current form to avoid integer overflow problems */ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pPage); } /* Check if data must be read/written to/from the btree page itself. */ @@ -63380,14 +66721,15 @@ static int accessPayload( */ if( (pCur->curFlags & BTCF_ValidOvfl)==0 ){ int nOvfl = (pCur->info.nPayload-pCur->info.nLocal+ovflSize-1)/ovflSize; - if( nOvfl>pCur->nOvflAlloc ){ + if( pCur->aOverflow==0 + || nOvfl*(int)sizeof(Pgno) > sqlite3MallocSize(pCur->aOverflow) + ){ Pgno *aNew = (Pgno*)sqlite3Realloc( pCur->aOverflow, nOvfl*2*sizeof(Pgno) ); if( aNew==0 ){ return SQLITE_NOMEM_BKPT; }else{ - pCur->nOvflAlloc = nOvfl*2; pCur->aOverflow = aNew; } } @@ -63494,7 +66836,8 @@ static int accessPayload( } if( rc==SQLITE_OK && amt>0 ){ - return SQLITE_CORRUPT_BKPT; /* Overflow chain ends prematurely */ + /* Overflow chain ends prematurely */ + return SQLITE_CORRUPT_PAGE(pPage); } return rc; } @@ -63519,8 +66862,8 @@ static int accessPayload( SQLITE_PRIVATE int sqlite3BtreePayload(BtCursor *pCur, u32 offset, u32 amt, void *pBuf){ assert( cursorHoldsMutex(pCur) ); assert( pCur->eState==CURSOR_VALID ); - assert( pCur->iPage>=0 && pCur->apPage[pCur->iPage] ); - assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell ); + assert( pCur->iPage>=0 && pCur->pPage ); + assert( pCur->ix<pCur->pPage->nCell ); return accessPayload(pCur, offset, amt, (unsigned char*)pBuf, 0); } @@ -63577,18 +66920,23 @@ static const void *fetchPayload( BtCursor *pCur, /* Cursor pointing to entry to read from */ u32 *pAmt /* Write the number of available bytes here */ ){ - u32 amt; - assert( pCur!=0 && pCur->iPage>=0 && pCur->apPage[pCur->iPage]); + int amt; + assert( pCur!=0 && pCur->iPage>=0 && pCur->pPage); assert( pCur->eState==CURSOR_VALID ); assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); assert( cursorOwnsBtShared(pCur) ); - assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell ); + assert( pCur->ix<pCur->pPage->nCell ); assert( pCur->info.nSize>0 ); - assert( pCur->info.pPayload>pCur->apPage[pCur->iPage]->aData || CORRUPT_DB ); - assert( pCur->info.pPayload<pCur->apPage[pCur->iPage]->aDataEnd ||CORRUPT_DB); - amt = (int)(pCur->apPage[pCur->iPage]->aDataEnd - pCur->info.pPayload); - if( pCur->info.nLocal<amt ) amt = pCur->info.nLocal; - *pAmt = amt; + assert( pCur->info.pPayload>pCur->pPage->aData || CORRUPT_DB ); + assert( pCur->info.pPayload<pCur->pPage->aDataEnd ||CORRUPT_DB); + amt = pCur->info.nLocal; + if( amt>(int)(pCur->pPage->aDataEnd - pCur->info.pPayload) ){ + /* There is too little space on the page for the expected amount + ** of local content. Database must be corrupt. */ + assert( CORRUPT_DB ); + amt = MAX(0, (int)(pCur->pPage->aDataEnd - pCur->info.pPayload)); + } + *pAmt = (u32)amt; return (void*)pCur->info.pPayload; } @@ -63633,13 +66981,14 @@ static int moveToChild(BtCursor *pCur, u32 newPgno){ } pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); + pCur->aiIdx[pCur->iPage] = pCur->ix; + pCur->apPage[pCur->iPage] = pCur->pPage; + pCur->ix = 0; pCur->iPage++; - pCur->aiIdx[pCur->iPage] = 0; - return getAndInitPage(pBt, newPgno, &pCur->apPage[pCur->iPage], - pCur, pCur->curPagerFlags); + return getAndInitPage(pBt, newPgno, &pCur->pPage, pCur, pCur->curPagerFlags); } -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG /* ** Page pParent is an internal (non-leaf) tree page. This function ** asserts that page number iChild is the left-child if the iIdx'th @@ -63670,19 +67019,23 @@ static void assertParentIndex(MemPage *pParent, int iIdx, Pgno iChild){ ** the largest cell index. */ static void moveToParent(BtCursor *pCur){ + MemPage *pLeaf; assert( cursorOwnsBtShared(pCur) ); assert( pCur->eState==CURSOR_VALID ); assert( pCur->iPage>0 ); - assert( pCur->apPage[pCur->iPage] ); + assert( pCur->pPage ); assertParentIndex( pCur->apPage[pCur->iPage-1], pCur->aiIdx[pCur->iPage-1], - pCur->apPage[pCur->iPage]->pgno + pCur->pPage->pgno ); testcase( pCur->aiIdx[pCur->iPage-1] > pCur->apPage[pCur->iPage-1]->nCell ); pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); - releasePageNotNull(pCur->apPage[pCur->iPage--]); + pCur->ix = pCur->aiIdx[pCur->iPage-1]; + pLeaf = pCur->pPage; + pCur->pPage = pCur->apPage[--pCur->iPage]; + releasePageNotNull(pLeaf); } /* @@ -63694,9 +67047,9 @@ static void moveToParent(BtCursor *pCur){ ** single child page. This can only happen with the table rooted at page 1. ** ** If the b-tree structure is empty, the cursor state is set to -** CURSOR_INVALID. Otherwise, the cursor is set to point to the first -** cell located on the root (or virtual root) page and the cursor state -** is set to CURSOR_VALID. +** CURSOR_INVALID and this routine returns SQLITE_EMPTY. Otherwise, +** the cursor is set to point to the first cell located on the root +** (or virtual root) page and the cursor state is set to CURSOR_VALID. ** ** If this function returns successfully, it may be assumed that the ** page-header flags indicate that the [virtual] root-page is the expected @@ -63714,37 +67067,40 @@ static int moveToRoot(BtCursor *pCur){ assert( CURSOR_INVALID < CURSOR_REQUIRESEEK ); assert( CURSOR_VALID < CURSOR_REQUIRESEEK ); assert( CURSOR_FAULT > CURSOR_REQUIRESEEK ); - if( pCur->eState>=CURSOR_REQUIRESEEK ){ - if( pCur->eState==CURSOR_FAULT ){ - assert( pCur->skipNext!=SQLITE_OK ); - return pCur->skipNext; - } - sqlite3BtreeClearCursor(pCur); - } + assert( pCur->eState < CURSOR_REQUIRESEEK || pCur->iPage<0 ); + assert( pCur->pgnoRoot>0 || pCur->iPage<0 ); if( pCur->iPage>=0 ){ if( pCur->iPage ){ - do{ - assert( pCur->apPage[pCur->iPage]!=0 ); - releasePageNotNull(pCur->apPage[pCur->iPage--]); - }while( pCur->iPage); + releasePageNotNull(pCur->pPage); + while( --pCur->iPage ){ + releasePageNotNull(pCur->apPage[pCur->iPage]); + } + pCur->pPage = pCur->apPage[0]; goto skip_init; } }else if( pCur->pgnoRoot==0 ){ pCur->eState = CURSOR_INVALID; - return SQLITE_OK; + return SQLITE_EMPTY; }else{ assert( pCur->iPage==(-1) ); - rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->apPage[0], + if( pCur->eState>=CURSOR_REQUIRESEEK ){ + if( pCur->eState==CURSOR_FAULT ){ + assert( pCur->skipNext!=SQLITE_OK ); + return pCur->skipNext; + } + sqlite3BtreeClearCursor(pCur); + } + rc = getAndInitPage(pCur->pBtree->pBt, pCur->pgnoRoot, &pCur->pPage, 0, pCur->curPagerFlags); if( rc!=SQLITE_OK ){ pCur->eState = CURSOR_INVALID; - return rc; + return rc; } pCur->iPage = 0; - pCur->curIntKey = pCur->apPage[0]->intKey; + pCur->curIntKey = pCur->pPage->intKey; } - pRoot = pCur->apPage[0]; + pRoot = pCur->pPage; assert( pRoot->pgno==pCur->pgnoRoot ); /* If pCur->pKeyInfo is not NULL, then the caller that opened this cursor @@ -63759,15 +67115,15 @@ static int moveToRoot(BtCursor *pCur){ ** (or the freelist). */ assert( pRoot->intKey==1 || pRoot->intKey==0 ); if( pRoot->isInit==0 || (pCur->pKeyInfo==0)!=pRoot->intKey ){ - return SQLITE_CORRUPT_BKPT; + return SQLITE_CORRUPT_PAGE(pCur->pPage); } skip_init: - pCur->aiIdx[0] = 0; + pCur->ix = 0; pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidNKey|BTCF_ValidOvfl); - pRoot = pCur->apPage[0]; + pRoot = pCur->pPage; if( pRoot->nCell>0 ){ pCur->eState = CURSOR_VALID; }else if( !pRoot->leaf ){ @@ -63778,6 +67134,7 @@ skip_init: rc = moveToChild(pCur, subpage); }else{ pCur->eState = CURSOR_INVALID; + rc = SQLITE_EMPTY; } return rc; } @@ -63796,9 +67153,9 @@ static int moveToLeftmost(BtCursor *pCur){ assert( cursorOwnsBtShared(pCur) ); assert( pCur->eState==CURSOR_VALID ); - while( rc==SQLITE_OK && !(pPage = pCur->apPage[pCur->iPage])->leaf ){ - assert( pCur->aiIdx[pCur->iPage]<pPage->nCell ); - pgno = get4byte(findCell(pPage, pCur->aiIdx[pCur->iPage])); + while( rc==SQLITE_OK && !(pPage = pCur->pPage)->leaf ){ + assert( pCur->ix<pPage->nCell ); + pgno = get4byte(findCell(pPage, pCur->ix)); rc = moveToChild(pCur, pgno); } return rc; @@ -63821,13 +67178,13 @@ static int moveToRightmost(BtCursor *pCur){ assert( cursorOwnsBtShared(pCur) ); assert( pCur->eState==CURSOR_VALID ); - while( !(pPage = pCur->apPage[pCur->iPage])->leaf ){ + while( !(pPage = pCur->pPage)->leaf ){ pgno = get4byte(&pPage->aData[pPage->hdrOffset+8]); - pCur->aiIdx[pCur->iPage] = pPage->nCell; + pCur->ix = pPage->nCell; rc = moveToChild(pCur, pgno); if( rc ) return rc; } - pCur->aiIdx[pCur->iPage] = pPage->nCell-1; + pCur->ix = pPage->nCell-1; assert( pCur->info.nSize==0 ); assert( (pCur->curFlags & BTCF_ValidNKey)==0 ); return SQLITE_OK; @@ -63844,14 +67201,13 @@ SQLITE_PRIVATE int sqlite3BtreeFirst(BtCursor *pCur, int *pRes){ assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); rc = moveToRoot(pCur); if( rc==SQLITE_OK ){ - if( pCur->eState==CURSOR_INVALID ){ - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 ); - *pRes = 1; - }else{ - assert( pCur->apPage[pCur->iPage]->nCell>0 ); - *pRes = 0; - rc = moveToLeftmost(pCur); - } + assert( pCur->pPage->nCell>0 ); + *pRes = 0; + rc = moveToLeftmost(pCur); + }else if( rc==SQLITE_EMPTY ){ + assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 ); + *pRes = 1; + rc = SQLITE_OK; } return rc; } @@ -63875,28 +67231,26 @@ SQLITE_PRIVATE int sqlite3BtreeLast(BtCursor *pCur, int *pRes){ for(ii=0; ii<pCur->iPage; ii++){ assert( pCur->aiIdx[ii]==pCur->apPage[ii]->nCell ); } - assert( pCur->aiIdx[pCur->iPage]==pCur->apPage[pCur->iPage]->nCell-1 ); - assert( pCur->apPage[pCur->iPage]->leaf ); + assert( pCur->ix==pCur->pPage->nCell-1 ); + assert( pCur->pPage->leaf ); #endif return SQLITE_OK; } rc = moveToRoot(pCur); if( rc==SQLITE_OK ){ - if( CURSOR_INVALID==pCur->eState ){ - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 ); - *pRes = 1; + assert( pCur->eState==CURSOR_VALID ); + *pRes = 0; + rc = moveToRightmost(pCur); + if( rc==SQLITE_OK ){ + pCur->curFlags |= BTCF_AtLast; }else{ - assert( pCur->eState==CURSOR_VALID ); - *pRes = 0; - rc = moveToRightmost(pCur); - if( rc==SQLITE_OK ){ - pCur->curFlags |= BTCF_AtLast; - }else{ - pCur->curFlags &= ~BTCF_AtLast; - } - + pCur->curFlags &= ~BTCF_AtLast; } + }else if( rc==SQLITE_EMPTY ){ + assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 ); + *pRes = 1; + rc = SQLITE_OK; } return rc; } @@ -63964,16 +67318,19 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( /* If the requested key is one more than the previous key, then ** try to get there using sqlite3BtreeNext() rather than a full ** binary search. This is an optimization only. The correct answer - ** is still obtained without this ase, only a little more slowely */ + ** is still obtained without this case, only a little more slowely */ if( pCur->info.nKey+1==intKey && !pCur->skipNext ){ *pRes = 0; - rc = sqlite3BtreeNext(pCur, pRes); - if( rc ) return rc; - if( *pRes==0 ){ + rc = sqlite3BtreeNext(pCur, 0); + if( rc==SQLITE_OK ){ getCellInfo(pCur); if( pCur->info.nKey==intKey ){ return SQLITE_OK; } + }else if( rc==SQLITE_DONE ){ + rc = SQLITE_OK; + }else{ + return rc; } } } @@ -63992,22 +67349,23 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( rc = moveToRoot(pCur); if( rc ){ + if( rc==SQLITE_EMPTY ){ + assert( pCur->pgnoRoot==0 || pCur->pPage->nCell==0 ); + *pRes = -1; + return SQLITE_OK; + } return rc; } - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage] ); - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->isInit ); - assert( pCur->eState==CURSOR_INVALID || pCur->apPage[pCur->iPage]->nCell>0 ); - if( pCur->eState==CURSOR_INVALID ){ - *pRes = -1; - assert( pCur->pgnoRoot==0 || pCur->apPage[pCur->iPage]->nCell==0 ); - return SQLITE_OK; - } - assert( pCur->apPage[0]->intKey==pCur->curIntKey ); + assert( pCur->pPage ); + assert( pCur->pPage->isInit ); + assert( pCur->eState==CURSOR_VALID ); + assert( pCur->pPage->nCell > 0 ); + assert( pCur->iPage==0 || pCur->apPage[0]->intKey==pCur->curIntKey ); assert( pCur->curIntKey || pIdxKey ); for(;;){ int lwr, upr, idx, c; Pgno chldPg; - MemPage *pPage = pCur->apPage[pCur->iPage]; + MemPage *pPage = pCur->pPage; u8 *pCell; /* Pointer to current cell in pPage */ /* pPage->nCell must be greater than zero. If this is the root-page @@ -64022,14 +67380,16 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( upr = pPage->nCell-1; assert( biasRight==0 || biasRight==1 ); idx = upr>>(1-biasRight); /* idx = biasRight ? upr : (lwr+upr)/2; */ - pCur->aiIdx[pCur->iPage] = (u16)idx; + pCur->ix = (u16)idx; if( xRecordCompare==0 ){ for(;;){ i64 nCellKey; pCell = findCellPastPtr(pPage, idx); if( pPage->intKeyLeaf ){ while( 0x80 <= *(pCell++) ){ - if( pCell>=pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT; + if( pCell>=pPage->aDataEnd ){ + return SQLITE_CORRUPT_PAGE(pPage); + } } } getVarint(pCell, (u64*)&nCellKey); @@ -64041,7 +67401,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( if( lwr>upr ){ c = +1; break; } }else{ assert( nCellKey==intKey ); - pCur->aiIdx[pCur->iPage] = (u16)idx; + pCur->ix = (u16)idx; if( !pPage->leaf ){ lwr = idx; goto moveto_next_layer; @@ -64102,7 +67462,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( testcase( nCell==1 ); /* Invalid key size: 0x80 0x80 0x01 */ testcase( nCell==2 ); /* Minimum legal index key size */ if( nCell<2 ){ - rc = SQLITE_CORRUPT_BKPT; + rc = SQLITE_CORRUPT_PAGE(pPage); goto moveto_finish; } pCellKey = sqlite3Malloc( nCell+18 ); @@ -64110,7 +67470,7 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( rc = SQLITE_NOMEM_BKPT; goto moveto_finish; } - pCur->aiIdx[pCur->iPage] = (u16)idx; + pCur->ix = (u16)idx; rc = accessPayload(pCur, 0, nCell, (unsigned char*)pCellKey, 0); pCur->curFlags &= ~BTCF_ValidOvfl; if( rc ){ @@ -64132,8 +67492,8 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( assert( c==0 ); *pRes = 0; rc = SQLITE_OK; - pCur->aiIdx[pCur->iPage] = (u16)idx; - if( pIdxKey->errCode ) rc = SQLITE_CORRUPT; + pCur->ix = (u16)idx; + if( pIdxKey->errCode ) rc = SQLITE_CORRUPT_BKPT; goto moveto_finish; } if( lwr>upr ) break; @@ -64144,8 +67504,8 @@ SQLITE_PRIVATE int sqlite3BtreeMovetoUnpacked( assert( lwr==upr+1 || (pPage->intKey && !pPage->leaf) ); assert( pPage->isInit ); if( pPage->leaf ){ - assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell ); - pCur->aiIdx[pCur->iPage] = (u16)idx; + assert( pCur->ix<pCur->pPage->nCell ); + pCur->ix = (u16)idx; *pRes = c; rc = SQLITE_OK; goto moveto_finish; @@ -64156,7 +67516,7 @@ moveto_next_layer: }else{ chldPg = get4byte(findCell(pPage, lwr)); } - pCur->aiIdx[pCur->iPage] = (u16)lwr; + pCur->ix = (u16)lwr; rc = moveToChild(pCur, chldPg); if( rc ) break; } @@ -64183,10 +67543,37 @@ SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor *pCur){ } /* -** Advance the cursor to the next entry in the database. If -** successful then set *pRes=0. If the cursor -** was already pointing to the last entry in the database before -** this routine was called, then set *pRes=1. +** Return an estimate for the number of rows in the table that pCur is +** pointing to. Return a negative number if no estimate is currently +** available. +*/ +SQLITE_PRIVATE i64 sqlite3BtreeRowCountEst(BtCursor *pCur){ + i64 n; + u8 i; + + assert( cursorOwnsBtShared(pCur) ); + assert( sqlite3_mutex_held(pCur->pBtree->db->mutex) ); + + /* Currently this interface is only called by the OP_IfSmaller + ** opcode, and it that case the cursor will always be valid and + ** will always point to a leaf node. */ + if( NEVER(pCur->eState!=CURSOR_VALID) ) return -1; + if( NEVER(pCur->pPage->leaf==0) ) return -1; + + n = pCur->pPage->nCell; + for(i=0; i<pCur->iPage; i++){ + n *= pCur->apPage[i]->nCell; + } + return n; +} + +/* +** Advance the cursor to the next entry in the database. +** Return value: +** +** SQLITE_OK success +** SQLITE_DONE cursor is already pointing at the last element +** otherwise some kind of error occurred ** ** The main entry point is sqlite3BtreeNext(). That routine is optimized ** for the common case of merely incrementing the cell counter BtCursor.aiIdx @@ -64194,23 +67581,19 @@ SQLITE_PRIVATE int sqlite3BtreeEof(BtCursor *pCur){ ** routine is called when it is necessary to move to a different page or ** to restore the cursor. ** -** The calling function will set *pRes to 0 or 1. The initial *pRes value -** will be 1 if the cursor being stepped corresponds to an SQL index and -** if this routine could have been skipped if that SQL index had been -** a unique index. Otherwise the caller will have set *pRes to zero. -** Zero is the common case. The btree implementation is free to use the -** initial *pRes value as a hint to improve performance, but the current -** SQLite btree implementation does not. (Note that the comdb2 btree -** implementation does use this hint, however.) +** If bit 0x01 of the F argument in sqlite3BtreeNext(C,F) is 1, then the +** cursor corresponds to an SQL index and this routine could have been +** skipped if the SQL index had been a unique index. The F argument +** is a hint to the implement. SQLite btree implementation does not use +** this hint, but COMDB2 does. */ -static SQLITE_NOINLINE int btreeNext(BtCursor *pCur, int *pRes){ +static SQLITE_NOINLINE int btreeNext(BtCursor *pCur){ int rc; int idx; MemPage *pPage; assert( cursorOwnsBtShared(pCur) ); assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); - assert( *pRes==0 ); if( pCur->eState!=CURSOR_VALID ){ assert( (pCur->curFlags & BTCF_ValidOvfl)==0 ); rc = restoreCursorPosition(pCur); @@ -64218,8 +67601,7 @@ static SQLITE_NOINLINE int btreeNext(BtCursor *pCur, int *pRes){ return rc; } if( CURSOR_INVALID==pCur->eState ){ - *pRes = 1; - return SQLITE_OK; + return SQLITE_DONE; } if( pCur->skipNext ){ assert( pCur->eState==CURSOR_VALID || pCur->eState==CURSOR_SKIPNEXT ); @@ -64232,8 +67614,8 @@ static SQLITE_NOINLINE int btreeNext(BtCursor *pCur, int *pRes){ } } - pPage = pCur->apPage[pCur->iPage]; - idx = ++pCur->aiIdx[pCur->iPage]; + pPage = pCur->pPage; + idx = ++pCur->ix; assert( pPage->isInit ); /* If the database file is corrupt, it is possible for the value of idx @@ -64251,15 +67633,14 @@ static SQLITE_NOINLINE int btreeNext(BtCursor *pCur, int *pRes){ } do{ if( pCur->iPage==0 ){ - *pRes = 1; pCur->eState = CURSOR_INVALID; - return SQLITE_OK; + return SQLITE_DONE; } moveToParent(pCur); - pPage = pCur->apPage[pCur->iPage]; - }while( pCur->aiIdx[pCur->iPage]>=pPage->nCell ); + pPage = pCur->pPage; + }while( pCur->ix>=pPage->nCell ); if( pPage->intKey ){ - return sqlite3BtreeNext(pCur, pRes); + return sqlite3BtreeNext(pCur, 0); }else{ return SQLITE_OK; } @@ -64270,20 +67651,19 @@ static SQLITE_NOINLINE int btreeNext(BtCursor *pCur, int *pRes){ return moveToLeftmost(pCur); } } -SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){ +SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int flags){ MemPage *pPage; + UNUSED_PARAMETER( flags ); /* Used in COMDB2 but not native SQLite */ assert( cursorOwnsBtShared(pCur) ); - assert( pRes!=0 ); - assert( *pRes==0 || *pRes==1 ); + assert( flags==0 || flags==1 ); assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); pCur->info.nSize = 0; pCur->curFlags &= ~(BTCF_ValidNKey|BTCF_ValidOvfl); - *pRes = 0; - if( pCur->eState!=CURSOR_VALID ) return btreeNext(pCur, pRes); - pPage = pCur->apPage[pCur->iPage]; - if( (++pCur->aiIdx[pCur->iPage])>=pPage->nCell ){ - pCur->aiIdx[pCur->iPage]--; - return btreeNext(pCur, pRes); + if( pCur->eState!=CURSOR_VALID ) return btreeNext(pCur); + pPage = pCur->pPage; + if( (++pCur->ix)>=pPage->nCell ){ + pCur->ix--; + return btreeNext(pCur); } if( pPage->leaf ){ return SQLITE_OK; @@ -64293,10 +67673,12 @@ SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){ } /* -** Step the cursor to the back to the previous entry in the database. If -** successful then set *pRes=0. If the cursor -** was already pointing to the first entry in the database before -** this routine was called, then set *pRes=1. +** Step the cursor to the back to the previous entry in the database. +** Return values: +** +** SQLITE_OK success +** SQLITE_DONE the cursor is already on the first element of the table +** otherwise some kind of error occurred ** ** The main entry point is sqlite3BtreePrevious(). That routine is optimized ** for the common case of merely decrementing the cell counter BtCursor.aiIdx @@ -64304,22 +67686,17 @@ SQLITE_PRIVATE int sqlite3BtreeNext(BtCursor *pCur, int *pRes){ ** helper routine is called when it is necessary to move to a different page ** or to restore the cursor. ** -** The calling function will set *pRes to 0 or 1. The initial *pRes value -** will be 1 if the cursor being stepped corresponds to an SQL index and -** if this routine could have been skipped if that SQL index had been -** a unique index. Otherwise the caller will have set *pRes to zero. -** Zero is the common case. The btree implementation is free to use the -** initial *pRes value as a hint to improve performance, but the current -** SQLite btree implementation does not. (Note that the comdb2 btree -** implementation does use this hint, however.) +** If bit 0x01 of the F argument to sqlite3BtreePrevious(C,F) is 1, then +** the cursor corresponds to an SQL index and this routine could have been +** skipped if the SQL index had been a unique index. The F argument is a +** hint to the implement. The native SQLite btree implementation does not +** use this hint, but COMDB2 does. */ -static SQLITE_NOINLINE int btreePrevious(BtCursor *pCur, int *pRes){ +static SQLITE_NOINLINE int btreePrevious(BtCursor *pCur){ int rc; MemPage *pPage; assert( cursorOwnsBtShared(pCur) ); - assert( pRes!=0 ); - assert( *pRes==0 ); assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); assert( (pCur->curFlags & (BTCF_AtLast|BTCF_ValidOvfl|BTCF_ValidNKey))==0 ); assert( pCur->info.nSize==0 ); @@ -64329,8 +67706,7 @@ static SQLITE_NOINLINE int btreePrevious(BtCursor *pCur, int *pRes){ return rc; } if( CURSOR_INVALID==pCur->eState ){ - *pRes = 1; - return SQLITE_OK; + return SQLITE_DONE; } if( pCur->skipNext ){ assert( pCur->eState==CURSOR_VALID || pCur->eState==CURSOR_SKIPNEXT ); @@ -64343,50 +67719,48 @@ static SQLITE_NOINLINE int btreePrevious(BtCursor *pCur, int *pRes){ } } - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; assert( pPage->isInit ); if( !pPage->leaf ){ - int idx = pCur->aiIdx[pCur->iPage]; + int idx = pCur->ix; rc = moveToChild(pCur, get4byte(findCell(pPage, idx))); if( rc ) return rc; rc = moveToRightmost(pCur); }else{ - while( pCur->aiIdx[pCur->iPage]==0 ){ + while( pCur->ix==0 ){ if( pCur->iPage==0 ){ pCur->eState = CURSOR_INVALID; - *pRes = 1; - return SQLITE_OK; + return SQLITE_DONE; } moveToParent(pCur); } assert( pCur->info.nSize==0 ); assert( (pCur->curFlags & (BTCF_ValidOvfl))==0 ); - pCur->aiIdx[pCur->iPage]--; - pPage = pCur->apPage[pCur->iPage]; + pCur->ix--; + pPage = pCur->pPage; if( pPage->intKey && !pPage->leaf ){ - rc = sqlite3BtreePrevious(pCur, pRes); + rc = sqlite3BtreePrevious(pCur, 0); }else{ rc = SQLITE_OK; } } return rc; } -SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int *pRes){ +SQLITE_PRIVATE int sqlite3BtreePrevious(BtCursor *pCur, int flags){ assert( cursorOwnsBtShared(pCur) ); - assert( pRes!=0 ); - assert( *pRes==0 || *pRes==1 ); + assert( flags==0 || flags==1 ); assert( pCur->skipNext==0 || pCur->eState!=CURSOR_VALID ); - *pRes = 0; + UNUSED_PARAMETER( flags ); /* Used in COMDB2 but not native SQLite */ pCur->curFlags &= ~(BTCF_AtLast|BTCF_ValidOvfl|BTCF_ValidNKey); pCur->info.nSize = 0; if( pCur->eState!=CURSOR_VALID - || pCur->aiIdx[pCur->iPage]==0 - || pCur->apPage[pCur->iPage]->leaf==0 + || pCur->ix==0 + || pCur->pPage->leaf==0 ){ - return btreePrevious(pCur, pRes); + return btreePrevious(pCur); } - pCur->aiIdx[pCur->iPage]--; + pCur->ix--; return SQLITE_OK; } @@ -64492,7 +67866,7 @@ static int allocateBtreePage( } testcase( iTrunk==mxPage ); if( iTrunk>mxPage || nSearch++ > n ){ - rc = SQLITE_CORRUPT_BKPT; + rc = SQLITE_CORRUPT_PGNO(pPrevTrunk ? pPrevTrunk->pgno : 1); }else{ rc = btreeGetUnusedPage(pBt, iTrunk, &pTrunk, 0); } @@ -64521,7 +67895,7 @@ static int allocateBtreePage( TRACE(("ALLOCATE: %d trunk - %d free pages left\n", *pPgno, n-1)); }else if( k>(u32)(pBt->usableSize/4 - 2) ){ /* Value of k is out of range. Database corruption */ - rc = SQLITE_CORRUPT_BKPT; + rc = SQLITE_CORRUPT_PGNO(iTrunk); goto end_allocate_page; #ifndef SQLITE_OMIT_AUTOVACUUM }else if( searchList @@ -64555,7 +67929,7 @@ static int allocateBtreePage( MemPage *pNewTrunk; Pgno iNewTrunk = get4byte(&pTrunk->aData[8]); if( iNewTrunk>mxPage ){ - rc = SQLITE_CORRUPT_BKPT; + rc = SQLITE_CORRUPT_PGNO(iTrunk); goto end_allocate_page; } testcase( iNewTrunk==mxPage ); @@ -64620,7 +67994,7 @@ static int allocateBtreePage( iPage = get4byte(&aData[8+closest*4]); testcase( iPage==mxPage ); if( iPage>mxPage ){ - rc = SQLITE_CORRUPT_BKPT; + rc = SQLITE_CORRUPT_PGNO(iTrunk); goto end_allocate_page; } testcase( iPage==mxPage ); @@ -64869,16 +68243,15 @@ static void freePage(MemPage *pPage, int *pRC){ } /* -** Free any overflow pages associated with the given Cell. Write the -** local Cell size (the number of bytes on the original page, omitting -** overflow) into *pnSize. +** Free any overflow pages associated with the given Cell. Store +** size information about the cell in pInfo. */ static int clearCell( MemPage *pPage, /* The page that contains the Cell */ unsigned char *pCell, /* First byte of the Cell */ CellInfo *pInfo /* Size information about the cell */ ){ - BtShared *pBt = pPage->pBt; + BtShared *pBt; Pgno ovflPgno; int rc; int nOvfl; @@ -64889,10 +68262,14 @@ static int clearCell( if( pInfo->nLocal==pInfo->nPayload ){ return SQLITE_OK; /* No overflow pages. Return without doing anything */ } - if( pCell+pInfo->nSize-1 > pPage->aData+pPage->maskPage ){ - return SQLITE_CORRUPT_BKPT; /* Cell extends past end of page */ + testcase( pCell + pInfo->nSize == pPage->aDataEnd ); + testcase( pCell + (pInfo->nSize-1) == pPage->aDataEnd ); + if( pCell + pInfo->nSize > pPage->aDataEnd ){ + /* Cell extends past end of page */ + return SQLITE_CORRUPT_PAGE(pPage); } ovflPgno = get4byte(pCell + pInfo->nSize - 4); + pBt = pPage->pBt; assert( pBt->usableSize > 4 ); ovflPageSize = pBt->usableSize - 4; nOvfl = (pInfo->nPayload - pInfo->nLocal + ovflPageSize - 1)/ovflPageSize; @@ -64960,21 +68337,20 @@ static int fillInCell( ){ int nPayload; const u8 *pSrc; - int nSrc, n, rc; + int nSrc, n, rc, mn; int spaceLeft; - MemPage *pOvfl = 0; - MemPage *pToRelease = 0; + MemPage *pToRelease; unsigned char *pPrior; unsigned char *pPayload; - BtShared *pBt = pPage->pBt; - Pgno pgnoOvfl = 0; + BtShared *pBt; + Pgno pgnoOvfl; int nHeader; assert( sqlite3_mutex_held(pPage->pBt->mutex) ); /* pPage is not necessarily writeable since pCell might be auxiliary ** buffer space that is separate from the pPage buffer area */ - assert( pCell<pPage->aData || pCell>=&pPage->aData[pBt->pageSize] + assert( pCell<pPage->aData || pCell>=&pPage->aData[pPage->pBt->pageSize] || sqlite3PagerIswriteable(pPage->pDbPage) ); /* Fill in the header. */ @@ -64994,25 +68370,36 @@ static int fillInCell( } /* Fill in the payload */ + pPayload = &pCell[nHeader]; if( nPayload<=pPage->maxLocal ){ + /* This is the common case where everything fits on the btree page + ** and no overflow pages are required. */ n = nHeader + nPayload; testcase( n==3 ); testcase( n==4 ); if( n<4 ) n = 4; *pnSize = n; - spaceLeft = nPayload; - pPrior = pCell; - }else{ - int mn = pPage->minLocal; - n = mn + (nPayload - mn) % (pPage->pBt->usableSize - 4); - testcase( n==pPage->maxLocal ); - testcase( n==pPage->maxLocal+1 ); - if( n > pPage->maxLocal ) n = mn; - spaceLeft = n; - *pnSize = n + nHeader + 4; - pPrior = &pCell[nHeader+n]; + assert( nSrc<=nPayload ); + testcase( nSrc<nPayload ); + memcpy(pPayload, pSrc, nSrc); + memset(pPayload+nSrc, 0, nPayload-nSrc); + return SQLITE_OK; } - pPayload = &pCell[nHeader]; + + /* If we reach this point, it means that some of the content will need + ** to spill onto overflow pages. + */ + mn = pPage->minLocal; + n = mn + (nPayload - mn) % (pPage->pBt->usableSize - 4); + testcase( n==pPage->maxLocal ); + testcase( n==pPage->maxLocal+1 ); + if( n > pPage->maxLocal ) n = mn; + spaceLeft = n; + *pnSize = n + nHeader + 4; + pPrior = &pCell[nHeader+n]; + pToRelease = 0; + pgnoOvfl = 0; + pBt = pPage->pBt; /* At this point variables should be set as follows: ** @@ -65026,7 +68413,7 @@ static int fillInCell( ** Use a call to btreeParseCellPtr() to verify that the values above ** were computed correctly. */ -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG { CellInfo info; pPage->xParseCell(pPage, pCell, &info); @@ -65038,8 +68425,35 @@ static int fillInCell( #endif /* Write the payload into the local Cell and any extra into overflow pages */ - while( nPayload>0 ){ + while( 1 ){ + n = nPayload; + if( n>spaceLeft ) n = spaceLeft; + + /* If pToRelease is not zero than pPayload points into the data area + ** of pToRelease. Make sure pToRelease is still writeable. */ + assert( pToRelease==0 || sqlite3PagerIswriteable(pToRelease->pDbPage) ); + + /* If pPayload is part of the data area of pPage, then make sure pPage + ** is still writeable */ + assert( pPayload<pPage->aData || pPayload>=&pPage->aData[pBt->pageSize] + || sqlite3PagerIswriteable(pPage->pDbPage) ); + + if( nSrc>=n ){ + memcpy(pPayload, pSrc, n); + }else if( nSrc>0 ){ + n = nSrc; + memcpy(pPayload, pSrc, n); + }else{ + memset(pPayload, 0, n); + } + nPayload -= n; + if( nPayload<=0 ) break; + pPayload += n; + pSrc += n; + nSrc -= n; + spaceLeft -= n; if( spaceLeft==0 ){ + MemPage *pOvfl = 0; #ifndef SQLITE_OMIT_AUTOVACUUM Pgno pgnoPtrmap = pgnoOvfl; /* Overflow page pointer-map entry page */ if( pBt->autoVacuum ){ @@ -65092,30 +68506,6 @@ static int fillInCell( pPayload = &pOvfl->aData[4]; spaceLeft = pBt->usableSize - 4; } - n = nPayload; - if( n>spaceLeft ) n = spaceLeft; - - /* If pToRelease is not zero than pPayload points into the data area - ** of pToRelease. Make sure pToRelease is still writeable. */ - assert( pToRelease==0 || sqlite3PagerIswriteable(pToRelease->pDbPage) ); - - /* If pPayload is part of the data area of pPage, then make sure pPage - ** is still writeable */ - assert( pPayload<pPage->aData || pPayload>=&pPage->aData[pBt->pageSize] - || sqlite3PagerIswriteable(pPage->pDbPage) ); - - if( nSrc>0 ){ - if( n>nSrc ) n = nSrc; - assert( pSrc ); - memcpy(pPayload, pSrc, n); - }else{ - memset(pPayload, 0, n); - } - nPayload -= n; - pPayload += n; - pSrc += n; - nSrc -= n; - spaceLeft -= n; } releasePage(pToRelease); return SQLITE_OK; @@ -65147,7 +68537,7 @@ static void dropCell(MemPage *pPage, int idx, int sz, int *pRC){ hdr = pPage->hdrOffset; testcase( pc==get2byte(&data[hdr+5]) ); testcase( pc+sz==pPage->pBt->usableSize ); - if( pc < (u32)get2byte(&data[hdr+5]) || pc+sz > pPage->pBt->usableSize ){ + if( pc+sz > pPage->pBt->usableSize ){ *pRC = SQLITE_CORRUPT_BKPT; return; } @@ -65985,7 +69375,7 @@ static int balance_nonroot( ** In this case, temporarily copy the cell into the aOvflSpace[] ** buffer. It will be copied out again as soon as the aSpace[] buffer ** is allocated. */ - if( pBt->btsFlags & BTS_SECURE_DELETE ){ + if( pBt->btsFlags & BTS_FAST_SECURE ){ int iOff; iOff = SQLITE_PTR_TO_INT(apDiv[i]) - SQLITE_PTR_TO_INT(pParent->aData); @@ -66014,10 +69404,8 @@ static int balance_nonroot( + nMaxCells*sizeof(u16) /* b.szCell */ + pBt->pageSize; /* aSpace1 */ - /* EVIDENCE-OF: R-28375-38319 SQLite will never request a scratch buffer - ** that is more than 6 times the database page size. */ assert( szScratch<=6*(int)pBt->pageSize ); - b.apCell = sqlite3ScratchMalloc( szScratch ); + b.apCell = sqlite3StackAllocRaw(0, szScratch ); if( b.apCell==0 ){ rc = SQLITE_NOMEM_BKPT; goto balance_cleanup; @@ -66062,7 +69450,7 @@ static int balance_nonroot( } /* Load b.apCell[] with pointers to all cells in pOld. If pOld - ** constains overflow cells, include them in the b.apCell[] array + ** contains overflow cells, include them in the b.apCell[] array ** in the correct spot. ** ** Note that when there are multiple overflow cells, it is always the @@ -66552,7 +69940,7 @@ static int balance_nonroot( ** free space needs to be up front. */ assert( nNew==1 || CORRUPT_DB ); - rc = defragmentPage(apNew[0]); + rc = defragmentPage(apNew[0], -1); testcase( rc!=SQLITE_OK ); assert( apNew[0]->nFree == (get2byte(&apNew[0]->aData[5])-apNew[0]->cellOffset-apNew[0]->nCell*2) @@ -66595,7 +69983,7 @@ static int balance_nonroot( ** Cleanup before returning. */ balance_cleanup: - sqlite3ScratchFree(b.apCell); + sqlite3StackFree(0, b.apCell); for(i=0; i<nOld; i++){ releasePage(apOld[i]); } @@ -66694,7 +70082,7 @@ static int balance(BtCursor *pCur){ do { int iPage = pCur->iPage; - MemPage *pPage = pCur->apPage[iPage]; + MemPage *pPage = pCur->pPage; if( iPage==0 ){ if( pPage->nOverflow ){ @@ -66708,9 +70096,11 @@ static int balance(BtCursor *pCur){ rc = balance_deeper(pPage, &pCur->apPage[1]); if( rc==SQLITE_OK ){ pCur->iPage = 1; + pCur->ix = 0; pCur->aiIdx[0] = 0; - pCur->aiIdx[1] = 0; - assert( pCur->apPage[1]->nOverflow ); + pCur->apPage[0] = pPage; + pCur->pPage = pCur->apPage[1]; + assert( pCur->pPage->nOverflow ); } }else{ break; @@ -66790,6 +70180,7 @@ static int balance(BtCursor *pCur){ releasePage(pPage); pCur->iPage--; assert( pCur->iPage>=0 ); + pCur->pPage = pCur->apPage[pCur->iPage]; } }while( rc==SQLITE_OK ); @@ -66799,6 +70190,94 @@ static int balance(BtCursor *pCur){ return rc; } +/* Overwrite content from pX into pDest. Only do the write if the +** content is different from what is already there. +*/ +static int btreeOverwriteContent( + MemPage *pPage, /* MemPage on which writing will occur */ + u8 *pDest, /* Pointer to the place to start writing */ + const BtreePayload *pX, /* Source of data to write */ + int iOffset, /* Offset of first byte to write */ + int iAmt /* Number of bytes to be written */ +){ + int nData = pX->nData - iOffset; + if( nData<=0 ){ + /* Overwritting with zeros */ + int i; + for(i=0; i<iAmt && pDest[i]==0; i++){} + if( i<iAmt ){ + int rc = sqlite3PagerWrite(pPage->pDbPage); + if( rc ) return rc; + memset(pDest + i, 0, iAmt - i); + } + }else{ + if( nData<iAmt ){ + /* Mixed read data and zeros at the end. Make a recursive call + ** to write the zeros then fall through to write the real data */ + int rc = btreeOverwriteContent(pPage, pDest+nData, pX, iOffset+nData, + iAmt-nData); + if( rc ) return rc; + iAmt = nData; + } + if( memcmp(pDest, ((u8*)pX->pData) + iOffset, iAmt)!=0 ){ + int rc = sqlite3PagerWrite(pPage->pDbPage); + if( rc ) return rc; + memcpy(pDest, ((u8*)pX->pData) + iOffset, iAmt); + } + } + return SQLITE_OK; +} + +/* +** Overwrite the cell that cursor pCur is pointing to with fresh content +** contained in pX. +*/ +static int btreeOverwriteCell(BtCursor *pCur, const BtreePayload *pX){ + int iOffset; /* Next byte of pX->pData to write */ + int nTotal = pX->nData + pX->nZero; /* Total bytes of to write */ + int rc; /* Return code */ + MemPage *pPage = pCur->pPage; /* Page being written */ + BtShared *pBt; /* Btree */ + Pgno ovflPgno; /* Next overflow page to write */ + u32 ovflPageSize; /* Size to write on overflow page */ + + if( pCur->info.pPayload + pCur->info.nLocal > pPage->aDataEnd ){ + return SQLITE_CORRUPT_BKPT; + } + /* Overwrite the local portion first */ + rc = btreeOverwriteContent(pPage, pCur->info.pPayload, pX, + 0, pCur->info.nLocal); + if( rc ) return rc; + if( pCur->info.nLocal==nTotal ) return SQLITE_OK; + + /* Now overwrite the overflow pages */ + iOffset = pCur->info.nLocal; + assert( nTotal>=0 ); + assert( iOffset>=0 ); + ovflPgno = get4byte(pCur->info.pPayload + iOffset); + pBt = pPage->pBt; + ovflPageSize = pBt->usableSize - 4; + do{ + rc = btreeGetPage(pBt, ovflPgno, &pPage, 0); + if( rc ) return rc; + if( sqlite3PagerPageRefcount(pPage->pDbPage)!=1 ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + if( iOffset+ovflPageSize<(u32)nTotal ){ + ovflPgno = get4byte(pPage->aData); + }else{ + ovflPageSize = nTotal - iOffset; + } + rc = btreeOverwriteContent(pPage, pPage->aData+4, pX, + iOffset, ovflPageSize); + } + sqlite3PagerUnref(pPage->pDbPage); + if( rc ) return rc; + iOffset += ovflPageSize; + }while( iOffset<nTotal ); + return SQLITE_OK; +} + /* ** Insert a new record into the BTree. The content of the new record @@ -66886,45 +70365,93 @@ SQLITE_PRIVATE int sqlite3BtreeInsert( assert( pX->pKey==0 ); /* If this is an insert into a table b-tree, invalidate any incrblob ** cursors open on the row being replaced */ - invalidateIncrblobCursors(p, pX->nKey, 0); + invalidateIncrblobCursors(p, pCur->pgnoRoot, pX->nKey, 0); /* If BTREE_SAVEPOSITION is set, the cursor must already be pointing - ** to a row with the same key as the new entry being inserted. */ - assert( (flags & BTREE_SAVEPOSITION)==0 || - ((pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey==pCur->info.nKey) ); + ** to a row with the same key as the new entry being inserted. + */ +#ifdef SQLITE_DEBUG + if( flags & BTREE_SAVEPOSITION ){ + assert( pCur->curFlags & BTCF_ValidNKey ); + assert( pX->nKey==pCur->info.nKey ); + assert( pCur->info.nSize!=0 ); + assert( loc==0 ); + } +#endif - /* If the cursor is currently on the last row and we are appending a - ** new row onto the end, set the "loc" to avoid an unnecessary - ** btreeMoveto() call */ + /* On the other hand, BTREE_SAVEPOSITION==0 does not imply + ** that the cursor is not pointing to a row to be overwritten. + ** So do a complete check. + */ if( (pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey==pCur->info.nKey ){ - loc = 0; - }else if( (pCur->curFlags&BTCF_ValidNKey)!=0 && pX->nKey>0 - && pCur->info.nKey==pX->nKey-1 ){ - loc = -1; + /* The cursor is pointing to the entry that is to be + ** overwritten */ + assert( pX->nData>=0 && pX->nZero>=0 ); + if( pCur->info.nSize!=0 + && pCur->info.nPayload==(u32)pX->nData+pX->nZero + ){ + /* New entry is the same size as the old. Do an overwrite */ + return btreeOverwriteCell(pCur, pX); + } + assert( loc==0 ); }else if( loc==0 ){ + /* The cursor is *not* pointing to the cell to be overwritten, nor + ** to an adjacent cell. Move the cursor so that it is pointing either + ** to the cell to be overwritten or an adjacent cell. + */ rc = sqlite3BtreeMovetoUnpacked(pCur, 0, pX->nKey, flags!=0, &loc); if( rc ) return rc; } - }else if( loc==0 && (flags & BTREE_SAVEPOSITION)==0 ){ - if( pX->nMem ){ - UnpackedRecord r; - r.pKeyInfo = pCur->pKeyInfo; - r.aMem = pX->aMem; - r.nField = pX->nMem; - r.default_rc = 0; - r.errCode = 0; - r.r1 = 0; - r.r2 = 0; - r.eqSeen = 0; - rc = sqlite3BtreeMovetoUnpacked(pCur, &r, 0, flags!=0, &loc); - }else{ - rc = btreeMoveto(pCur, pX->pKey, pX->nKey, flags!=0, &loc); + }else{ + /* This is an index or a WITHOUT ROWID table */ + + /* If BTREE_SAVEPOSITION is set, the cursor must already be pointing + ** to a row with the same key as the new entry being inserted. + */ + assert( (flags & BTREE_SAVEPOSITION)==0 || loc==0 ); + + /* If the cursor is not already pointing either to the cell to be + ** overwritten, or if a new cell is being inserted, if the cursor is + ** not pointing to an immediately adjacent cell, then move the cursor + ** so that it does. + */ + if( loc==0 && (flags & BTREE_SAVEPOSITION)==0 ){ + if( pX->nMem ){ + UnpackedRecord r; + r.pKeyInfo = pCur->pKeyInfo; + r.aMem = pX->aMem; + r.nField = pX->nMem; + r.default_rc = 0; + r.errCode = 0; + r.r1 = 0; + r.r2 = 0; + r.eqSeen = 0; + rc = sqlite3BtreeMovetoUnpacked(pCur, &r, 0, flags!=0, &loc); + }else{ + rc = btreeMoveto(pCur, pX->pKey, pX->nKey, flags!=0, &loc); + } + if( rc ) return rc; + } + + /* If the cursor is currently pointing to an entry to be overwritten + ** and the new content is the same as as the old, then use the + ** overwrite optimization. + */ + if( loc==0 ){ + getCellInfo(pCur); + if( pCur->info.nKey==pX->nKey ){ + BtreePayload x2; + x2.pData = pX->pKey; + x2.nData = pX->nKey; + x2.nZero = 0; + return btreeOverwriteCell(pCur, &x2); + } } - if( rc ) return rc; + } assert( pCur->eState==CURSOR_VALID || (pCur->eState==CURSOR_INVALID && loc) ); - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; assert( pPage->intKey || pX->nKey>=0 ); assert( pPage->leaf || !pPage->intKey ); @@ -66938,7 +70465,7 @@ SQLITE_PRIVATE int sqlite3BtreeInsert( if( rc ) goto end_insert; assert( szNew==pPage->xCellSize(pPage, newCell) ); assert( szNew <= MX_CELL_SIZE(pBt) ); - idx = pCur->aiIdx[pCur->iPage]; + idx = pCur->ix; if( loc==0 ){ CellInfo info; assert( idx<pPage->nCell ); @@ -66951,12 +70478,18 @@ SQLITE_PRIVATE int sqlite3BtreeInsert( memcpy(newCell, oldCell, 4); } rc = clearCell(pPage, oldCell, &info); - if( info.nSize==szNew && info.nLocal==info.nPayload ){ + if( info.nSize==szNew && info.nLocal==info.nPayload + && (!ISAUTOVACUUM || szNew<pPage->minLocal) + ){ /* Overwrite the old cell with the new if they are the same size. ** We could also try to do this if the old cell is smaller, then add ** the leftover space to the free list. But experiments show that ** doing that is no faster then skipping this optimization and just - ** calling dropCell() and insertCell(). */ + ** calling dropCell() and insertCell(). + ** + ** This optimization cannot be used on an autovacuum database if the + ** new entry uses overflow pages, as the insertCell() call below is + ** necessary to add the PTRMAP_OVERFLOW1 pointer-map entry. */ assert( rc==SQLITE_OK ); /* clearCell never fails when nLocal==nPayload */ if( oldCell+szNew > pPage->aDataEnd ) return SQLITE_CORRUPT_BKPT; memcpy(oldCell, newCell, szNew); @@ -66966,7 +70499,8 @@ SQLITE_PRIVATE int sqlite3BtreeInsert( if( rc ) goto end_insert; }else if( loc<0 && pPage->nCell>0 ){ assert( pPage->leaf ); - idx = ++pCur->aiIdx[pCur->iPage]; + idx = ++pCur->ix; + pCur->curFlags &= ~BTCF_ValidNKey; }else{ assert( pPage->leaf ); } @@ -67004,10 +70538,10 @@ SQLITE_PRIVATE int sqlite3BtreeInsert( ** fails. Internal data structure corruption will result otherwise. ** Also, set the cursor state to invalid. This stops saveCursorPosition() ** from trying to save the current position of the cursor. */ - pCur->apPage[pCur->iPage]->nOverflow = 0; + pCur->pPage->nOverflow = 0; pCur->eState = CURSOR_INVALID; if( (flags & BTREE_SAVEPOSITION) && rc==SQLITE_OK ){ - rc = moveToRoot(pCur); + btreeReleaseAllCursorPages(pCur); if( pCur->pKeyInfo ){ assert( pCur->pKey==0 ); pCur->pKey = sqlite3Malloc( pX->nKey ); @@ -67021,7 +70555,7 @@ SQLITE_PRIVATE int sqlite3BtreeInsert( pCur->nKey = pX->nKey; } } - assert( pCur->apPage[pCur->iPage]->nOverflow==0 ); + assert( pCur->iPage<0 || pCur->pPage->nOverflow==0 ); end_insert: return rc; @@ -67062,13 +70596,13 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur, u8 flags){ assert( pCur->curFlags & BTCF_WriteFlag ); assert( hasSharedCacheTableLock(p, pCur->pgnoRoot, pCur->pKeyInfo!=0, 2) ); assert( !hasReadConflicts(p, pCur->pgnoRoot) ); - assert( pCur->aiIdx[pCur->iPage]<pCur->apPage[pCur->iPage]->nCell ); + assert( pCur->ix<pCur->pPage->nCell ); assert( pCur->eState==CURSOR_VALID ); assert( (flags & ~(BTREE_SAVEPOSITION | BTREE_AUXDELETE))==0 ); iCellDepth = pCur->iPage; - iCellIdx = pCur->aiIdx[iCellDepth]; - pPage = pCur->apPage[iCellDepth]; + iCellIdx = pCur->ix; + pPage = pCur->pPage; pCell = findCell(pPage, iCellIdx); /* If the bPreserve flag is set to true, then the cursor position must @@ -67101,8 +70635,8 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur, u8 flags){ ** sub-tree headed by the child page of the cell being deleted. This makes ** balancing the tree following the delete operation easier. */ if( !pPage->leaf ){ - int notUsed = 0; - rc = sqlite3BtreePrevious(pCur, ¬Used); + rc = sqlite3BtreePrevious(pCur, 0); + assert( rc!=SQLITE_DONE ); if( rc ) return rc; } @@ -67116,7 +70650,7 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur, u8 flags){ /* If this is a delete operation to remove a row from a table b-tree, ** invalidate any incrblob cursors open on the row being deleted. */ if( pCur->pKeyInfo==0 ){ - invalidateIncrblobCursors(p, pCur->info.nKey, 0); + invalidateIncrblobCursors(p, pCur->pgnoRoot, pCur->info.nKey, 0); } /* Make the page containing the entry to be deleted writable. Then free any @@ -67134,11 +70668,16 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur, u8 flags){ ** node. The cell from the leaf node needs to be moved to the internal ** node to replace the deleted cell. */ if( !pPage->leaf ){ - MemPage *pLeaf = pCur->apPage[pCur->iPage]; + MemPage *pLeaf = pCur->pPage; int nCell; - Pgno n = pCur->apPage[iCellDepth+1]->pgno; + Pgno n; unsigned char *pTmp; + if( iCellDepth<pCur->iPage-1 ){ + n = pCur->apPage[iCellDepth+1]->pgno; + }else{ + n = pCur->pPage->pgno; + } pCell = findCell(pLeaf, pLeaf->nCell-1); if( pCell<&pLeaf->aData[4] ) return SQLITE_CORRUPT_BKPT; nCell = pLeaf->xCellSize(pLeaf, pCell); @@ -67170,29 +70709,34 @@ SQLITE_PRIVATE int sqlite3BtreeDelete(BtCursor *pCur, u8 flags){ ** well. */ rc = balance(pCur); if( rc==SQLITE_OK && pCur->iPage>iCellDepth ){ + releasePageNotNull(pCur->pPage); + pCur->iPage--; while( pCur->iPage>iCellDepth ){ releasePage(pCur->apPage[pCur->iPage--]); } + pCur->pPage = pCur->apPage[pCur->iPage]; rc = balance(pCur); } if( rc==SQLITE_OK ){ if( bSkipnext ){ assert( bPreserve && (pCur->iPage==iCellDepth || CORRUPT_DB) ); - assert( pPage==pCur->apPage[pCur->iPage] || CORRUPT_DB ); + assert( pPage==pCur->pPage || CORRUPT_DB ); assert( (pPage->nCell>0 || CORRUPT_DB) && iCellIdx<=pPage->nCell ); pCur->eState = CURSOR_SKIPNEXT; if( iCellIdx>=pPage->nCell ){ pCur->skipNext = -1; - pCur->aiIdx[iCellDepth] = pPage->nCell-1; + pCur->ix = pPage->nCell-1; }else{ pCur->skipNext = 1; } }else{ rc = moveToRoot(pCur); if( bPreserve ){ + btreeReleaseAllCursorPages(pCur); pCur->eState = CURSOR_REQUIRESEEK; } + if( rc==SQLITE_EMPTY ) rc = SQLITE_OK; } } return rc; @@ -67443,7 +70987,7 @@ SQLITE_PRIVATE int sqlite3BtreeClearTable(Btree *p, int iTable, int *pnChange){ /* Invalidate all incrblob cursors open on table iTable (assuming iTable ** is the root of a table b-tree - if it is not, the following call is ** a no-op). */ - invalidateIncrblobCursors(p, 0, 1); + invalidateIncrblobCursors(p, (Pgno)iTable, 0, 1); rc = clearDatabasePage(pBt, (Pgno)iTable, 0, pnChange); } sqlite3BtreeLeave(p); @@ -67657,11 +71201,11 @@ SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *pCur, i64 *pnEntry){ i64 nEntry = 0; /* Value to return in *pnEntry */ int rc; /* Return code */ - if( pCur->pgnoRoot==0 ){ + rc = moveToRoot(pCur); + if( rc==SQLITE_EMPTY ){ *pnEntry = 0; return SQLITE_OK; } - rc = moveToRoot(pCur); /* Unless an error occurs, the following loop runs one iteration for each ** page in the B-Tree structure (not including overflow pages). @@ -67674,7 +71218,7 @@ SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *pCur, i64 *pnEntry){ ** this page contains countable entries. Increment the entry counter ** accordingly. */ - pPage = pCur->apPage[pCur->iPage]; + pPage = pCur->pPage; if( pPage->leaf || !pPage->intKey ){ nEntry += pPage->nCell; } @@ -67697,16 +71241,16 @@ SQLITE_PRIVATE int sqlite3BtreeCount(BtCursor *pCur, i64 *pnEntry){ return moveToRoot(pCur); } moveToParent(pCur); - }while ( pCur->aiIdx[pCur->iPage]>=pCur->apPage[pCur->iPage]->nCell ); + }while ( pCur->ix>=pCur->pPage->nCell ); - pCur->aiIdx[pCur->iPage]++; - pPage = pCur->apPage[pCur->iPage]; + pCur->ix++; + pPage = pCur->pPage; } /* Descend to the child node of the cell that the cursor currently ** points at. This is the right-child if (iIdx==pPage->nCell). */ - iIdx = pCur->aiIdx[pCur->iPage]; + iIdx = pCur->ix; if( iIdx==pPage->nCell ){ rc = moveToChild(pCur, get4byte(&pPage->aData[pPage->hdrOffset+8])); }else{ @@ -67742,14 +71286,14 @@ static void checkAppendMsg( pCheck->nErr++; va_start(ap, zFormat); if( pCheck->errMsg.nChar ){ - sqlite3StrAccumAppend(&pCheck->errMsg, "\n", 1); + sqlite3_str_append(&pCheck->errMsg, "\n", 1); } if( pCheck->zPfx ){ - sqlite3XPrintf(&pCheck->errMsg, pCheck->zPfx, pCheck->v1, pCheck->v2); + sqlite3_str_appendf(&pCheck->errMsg, pCheck->zPfx, pCheck->v1, pCheck->v2); } - sqlite3VXPrintf(&pCheck->errMsg, zFormat, ap); + sqlite3_str_vappendf(&pCheck->errMsg, zFormat, ap); va_end(ap); - if( pCheck->errMsg.accError==STRACCUM_NOMEM ){ + if( pCheck->errMsg.accError==SQLITE_NOMEM ){ pCheck->mallocFailed = 1; } } @@ -68091,6 +71635,7 @@ static int checkTreePage( checkAppendMsg(pCheck, "Rowid %lld out of order", info.nKey); } maxKey = info.nKey; + keyCanBeEqual = 0; /* Only the first key on the page may ==maxKey */ } /* Check the content overflow list */ @@ -68332,11 +71877,11 @@ integrity_ck_cleanup: sqlite3PageFree(sCheck.heap); sqlite3_free(sCheck.aPgRef); if( sCheck.mallocFailed ){ - sqlite3StrAccumReset(&sCheck.errMsg); + sqlite3_str_reset(&sCheck.errMsg); sCheck.nErr++; } *pnErr = sCheck.nErr; - if( sCheck.nErr==0 ) sqlite3StrAccumReset(&sCheck.errMsg); + if( sCheck.nErr==0 ) sqlite3_str_reset(&sCheck.errMsg); /* Make sure this analysis did not leave any unref() pages. */ assert( nRef==sqlite3PagerRefcount(pBt->pPager) ); sqlite3BtreeLeave(p); @@ -68540,7 +72085,7 @@ SQLITE_PRIVATE int sqlite3BtreePutData(BtCursor *pCsr, u32 offset, u32 amt, void && pCsr->pBt->inTransaction==TRANS_WRITE ); assert( hasSharedCacheTableLock(pCsr->pBtree, pCsr->pgnoRoot, 0, 2) ); assert( !hasReadConflicts(pCsr->pBtree, pCsr->pgnoRoot) ); - assert( pCsr->apPage[pCsr->iPage]->intKey ); + assert( pCsr->pPage->intKey ); return accessPayload(pCsr, offset, amt, (unsigned char *)z, 1); } @@ -69463,7 +73008,7 @@ copy_finished: */ SQLITE_PRIVATE int sqlite3VdbeCheckMemInvariants(Mem *p){ /* If MEM_Dyn is set then Mem.xDel!=0. - ** Mem.xDel is might not be initialized if MEM_Dyn is clear. + ** Mem.xDel might not be initialized if MEM_Dyn is clear. */ assert( (p->flags & MEM_Dyn)==0 || p->xDel!=0 ); @@ -69476,6 +73021,35 @@ SQLITE_PRIVATE int sqlite3VdbeCheckMemInvariants(Mem *p){ /* Cannot be both MEM_Int and MEM_Real at the same time */ assert( (p->flags & (MEM_Int|MEM_Real))!=(MEM_Int|MEM_Real) ); + if( p->flags & MEM_Null ){ + /* Cannot be both MEM_Null and some other type */ + assert( (p->flags & (MEM_Int|MEM_Real|MEM_Str|MEM_Blob + |MEM_RowSet|MEM_Frame|MEM_Agg))==0 ); + + /* If MEM_Null is set, then either the value is a pure NULL (the usual + ** case) or it is a pointer set using sqlite3_bind_pointer() or + ** sqlite3_result_pointer(). If a pointer, then MEM_Term must also be + ** set. + */ + if( (p->flags & (MEM_Term|MEM_Subtype))==(MEM_Term|MEM_Subtype) ){ + /* This is a pointer type. There may be a flag to indicate what to + ** do with the pointer. */ + assert( ((p->flags&MEM_Dyn)!=0 ? 1 : 0) + + ((p->flags&MEM_Ephem)!=0 ? 1 : 0) + + ((p->flags&MEM_Static)!=0 ? 1 : 0) <= 1 ); + + /* No other bits set */ + assert( (p->flags & ~(MEM_Null|MEM_Term|MEM_Subtype + |MEM_Dyn|MEM_Ephem|MEM_Static))==0 ); + }else{ + /* A pure NULL might have other flags, such as MEM_Static, MEM_Dyn, + ** MEM_Ephem, MEM_Cleared, or MEM_Subtype */ + } + }else{ + /* The MEM_Cleared bit is only allowed on NULLs */ + assert( (p->flags & MEM_Cleared)==0 ); + } + /* The szMalloc field holds the correct memory allocation size */ assert( p->szMalloc==0 || p->szMalloc==sqlite3DbMallocSize(p->db,p->zMalloc) ); @@ -69500,6 +73074,51 @@ SQLITE_PRIVATE int sqlite3VdbeCheckMemInvariants(Mem *p){ } #endif +#ifdef SQLITE_DEBUG +/* +** Check that string value of pMem agrees with its integer or real value. +** +** A single int or real value always converts to the same strings. But +** many different strings can be converted into the same int or real. +** If a table contains a numeric value and an index is based on the +** corresponding string value, then it is important that the string be +** derived from the numeric value, not the other way around, to ensure +** that the index and table are consistent. See ticket +** https://www.sqlite.org/src/info/343634942dd54ab (2018-01-31) for +** an example. +** +** This routine looks at pMem to verify that if it has both a numeric +** representation and a string representation then the string rep has +** been derived from the numeric and not the other way around. It returns +** true if everything is ok and false if there is a problem. +** +** This routine is for use inside of assert() statements only. +*/ +SQLITE_PRIVATE int sqlite3VdbeMemConsistentDualRep(Mem *p){ + char zBuf[100]; + char *z; + int i, j, incr; + if( (p->flags & MEM_Str)==0 ) return 1; + if( (p->flags & (MEM_Int|MEM_Real))==0 ) return 1; + if( p->flags & MEM_Int ){ + sqlite3_snprintf(sizeof(zBuf),zBuf,"%lld",p->u.i); + }else{ + sqlite3_snprintf(sizeof(zBuf),zBuf,"%!.15g",p->u.r); + } + z = p->z; + i = j = 0; + incr = 1; + if( p->enc!=SQLITE_UTF8 ){ + incr = 2; + if( p->enc==SQLITE_UTF16BE ) z++; + } + while( zBuf[j] ){ + if( zBuf[j++]!=z[i] ) return 0; + i += incr; + } + return 1; +} +#endif /* SQLITE_DEBUG */ /* ** If pMem is an object with a valid string representation, this routine @@ -69561,26 +73180,25 @@ SQLITE_PRIVATE SQLITE_NOINLINE int sqlite3VdbeMemGrow(Mem *pMem, int n, int bPre assert( pMem->szMalloc==0 || pMem->szMalloc==sqlite3DbMallocSize(pMem->db, pMem->zMalloc) ); - if( pMem->szMalloc<n ){ - if( n<32 ) n = 32; - if( bPreserve && pMem->szMalloc>0 && pMem->z==pMem->zMalloc ){ - pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n); - bPreserve = 0; - }else{ - if( pMem->szMalloc>0 ) sqlite3DbFree(pMem->db, pMem->zMalloc); - pMem->zMalloc = sqlite3DbMallocRaw(pMem->db, n); - } - if( pMem->zMalloc==0 ){ - sqlite3VdbeMemSetNull(pMem); - pMem->z = 0; - pMem->szMalloc = 0; - return SQLITE_NOMEM_BKPT; - }else{ - pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->zMalloc); - } + if( n<32 ) n = 32; + if( pMem->szMalloc>0 && bPreserve && pMem->z==pMem->zMalloc ){ + pMem->z = pMem->zMalloc = sqlite3DbReallocOrFree(pMem->db, pMem->z, n); + bPreserve = 0; + }else{ + if( pMem->szMalloc>0 ) sqlite3DbFreeNN(pMem->db, pMem->zMalloc); + pMem->zMalloc = sqlite3DbMallocRaw(pMem->db, n); + } + if( pMem->zMalloc==0 ){ + sqlite3VdbeMemSetNull(pMem); + pMem->z = 0; + pMem->szMalloc = 0; + return SQLITE_NOMEM_BKPT; + }else{ + pMem->szMalloc = sqlite3DbMallocSize(pMem->db, pMem->zMalloc); } - if( bPreserve && pMem->z && pMem->z!=pMem->zMalloc ){ + if( bPreserve && pMem->z ){ + assert( pMem->z!=pMem->zMalloc ); memcpy(pMem->zMalloc, pMem->z, pMem->n); } if( (pMem->flags&MEM_Dyn)!=0 ){ @@ -69619,6 +73237,20 @@ SQLITE_PRIVATE int sqlite3VdbeMemClearAndResize(Mem *pMem, int szNew){ } /* +** It is already known that pMem contains an unterminated string. +** Add the zero terminator. +*/ +static SQLITE_NOINLINE int vdbeMemAddTerminator(Mem *pMem){ + if( sqlite3VdbeMemGrow(pMem, pMem->n+2, 1) ){ + return SQLITE_NOMEM_BKPT; + } + pMem->z[pMem->n] = 0; + pMem->z[pMem->n+1] = 0; + pMem->flags |= MEM_Term; + return SQLITE_OK; +} + +/* ** Change pMem so that its MEM_Str or MEM_Blob value is stored in ** MEM.zMalloc, where it can be safely written. ** @@ -69630,12 +73262,8 @@ SQLITE_PRIVATE int sqlite3VdbeMemMakeWriteable(Mem *pMem){ if( (pMem->flags & (MEM_Str|MEM_Blob))!=0 ){ if( ExpandBlob(pMem) ) return SQLITE_NOMEM; if( pMem->szMalloc==0 || pMem->z!=pMem->zMalloc ){ - if( sqlite3VdbeMemGrow(pMem, pMem->n + 2, 1) ){ - return SQLITE_NOMEM_BKPT; - } - pMem->z[pMem->n] = 0; - pMem->z[pMem->n+1] = 0; - pMem->flags |= MEM_Term; + int rc = vdbeMemAddTerminator(pMem); + if( rc ) return rc; } } pMem->flags &= ~MEM_Ephem; @@ -69675,20 +73303,6 @@ SQLITE_PRIVATE int sqlite3VdbeMemExpandBlob(Mem *pMem){ #endif /* -** It is already known that pMem contains an unterminated string. -** Add the zero terminator. -*/ -static SQLITE_NOINLINE int vdbeMemAddTerminator(Mem *pMem){ - if( sqlite3VdbeMemGrow(pMem, pMem->n+2, 1) ){ - return SQLITE_NOMEM_BKPT; - } - pMem->z[pMem->n] = 0; - pMem->z[pMem->n+1] = 0; - pMem->flags |= MEM_Term; - return SQLITE_OK; -} - -/* ** Make sure the given Mem is \u0000 terminated. */ SQLITE_PRIVATE int sqlite3VdbeMemNulTerminate(Mem *pMem){ @@ -69762,26 +73376,24 @@ SQLITE_PRIVATE int sqlite3VdbeMemStringify(Mem *pMem, u8 enc, u8 bForce){ ** otherwise. */ SQLITE_PRIVATE int sqlite3VdbeMemFinalize(Mem *pMem, FuncDef *pFunc){ - int rc = SQLITE_OK; - if( ALWAYS(pFunc && pFunc->xFinalize) ){ - sqlite3_context ctx; - Mem t; - assert( (pMem->flags & MEM_Null)!=0 || pFunc==pMem->u.pDef ); - assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - memset(&ctx, 0, sizeof(ctx)); - memset(&t, 0, sizeof(t)); - t.flags = MEM_Null; - t.db = pMem->db; - ctx.pOut = &t; - ctx.pMem = pMem; - ctx.pFunc = pFunc; - pFunc->xFinalize(&ctx); /* IMP: R-24505-23230 */ - assert( (pMem->flags & MEM_Dyn)==0 ); - if( pMem->szMalloc>0 ) sqlite3DbFree(pMem->db, pMem->zMalloc); - memcpy(pMem, &t, sizeof(t)); - rc = ctx.isError; - } - return rc; + sqlite3_context ctx; + Mem t; + assert( pFunc!=0 ); + assert( pFunc->xFinalize!=0 ); + assert( (pMem->flags & MEM_Null)!=0 || pFunc==pMem->u.pDef ); + assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); + memset(&ctx, 0, sizeof(ctx)); + memset(&t, 0, sizeof(t)); + t.flags = MEM_Null; + t.db = pMem->db; + ctx.pOut = &t; + ctx.pMem = pMem; + ctx.pFunc = pFunc; + pFunc->xFinalize(&ctx); /* IMP: R-24505-23230 */ + assert( (pMem->flags & MEM_Dyn)==0 ); + if( pMem->szMalloc>0 ) sqlite3DbFreeNN(pMem->db, pMem->zMalloc); + memcpy(pMem, &t, sizeof(t)); + return ctx.isError; } /* @@ -69828,7 +73440,7 @@ static SQLITE_NOINLINE void vdbeMemClear(Mem *p){ vdbeMemClearExternAndSetNull(p); } if( p->szMalloc ){ - sqlite3DbFree(p->db, p->zMalloc); + sqlite3DbFreeNN(p->db, p->zMalloc); p->szMalloc = 0; } p->z = 0; @@ -69856,7 +73468,7 @@ SQLITE_PRIVATE void sqlite3VdbeMemRelease(Mem *p){ ** If the double is out of range of a 64-bit signed integer then ** return the closest available 64-bit signed integer. */ -static i64 doubleToInt64(double r){ +static SQLITE_NOINLINE i64 doubleToInt64(double r){ #ifdef SQLITE_OMIT_FLOATING_POINT /* When floating-point is omitted, double and int64 are the same thing */ return r; @@ -69892,6 +73504,11 @@ static i64 doubleToInt64(double r){ ** ** If pMem represents a string value, its encoding might be changed. */ +static SQLITE_NOINLINE i64 memIntValue(Mem *pMem){ + i64 value = 0; + sqlite3Atoi64(pMem->z, &value, pMem->n, pMem->enc); + return value; +} SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem *pMem){ int flags; assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); @@ -69902,10 +73519,8 @@ SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem *pMem){ }else if( flags & MEM_Real ){ return doubleToInt64(pMem->u.r); }else if( flags & (MEM_Str|MEM_Blob) ){ - i64 value = 0; assert( pMem->z || pMem->n==0 ); - sqlite3Atoi64(pMem->z, &value, pMem->n, pMem->enc); - return value; + return memIntValue(pMem); }else{ return 0; } @@ -69917,6 +73532,12 @@ SQLITE_PRIVATE i64 sqlite3VdbeIntValue(Mem *pMem){ ** value. If it is a string or blob, try to convert it to a double. ** If it is a NULL, return 0.0. */ +static SQLITE_NOINLINE double memRealValue(Mem *pMem){ + /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */ + double val = (double)0; + sqlite3AtoF(pMem->z, &val, pMem->n, pMem->enc); + return val; +} SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem *pMem){ assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); assert( EIGHT_BYTE_ALIGNMENT(pMem) ); @@ -69925,10 +73546,7 @@ SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem *pMem){ }else if( pMem->flags & MEM_Int ){ return (double)pMem->u.i; }else if( pMem->flags & (MEM_Str|MEM_Blob) ){ - /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */ - double val = (double)0; - sqlite3AtoF(pMem->z, &val, pMem->n, pMem->enc); - return val; + return memRealValue(pMem); }else{ /* (double)0 In case of SQLITE_OMIT_FLOATING_POINT... */ return (double)0; @@ -69936,6 +73554,16 @@ SQLITE_PRIVATE double sqlite3VdbeRealValue(Mem *pMem){ } /* +** Return 1 if pMem represents true, and return 0 if pMem represents false. +** Return the value ifNull if pMem is NULL. +*/ +SQLITE_PRIVATE int sqlite3VdbeBooleanValue(Mem *pMem, int ifNull){ + if( pMem->flags & MEM_Int ) return pMem->u.i!=0; + if( pMem->flags & MEM_Null ) return ifNull; + return sqlite3VdbeRealValue(pMem)!=0.0; +} + +/* ** The MEM structure is already a MEM_Real. Try to also make it a ** MEM_Int if we can. */ @@ -69990,6 +73618,18 @@ SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem *pMem){ return SQLITE_OK; } +/* Compare a floating point value to an integer. Return true if the two +** values are the same within the precision of the floating point value. +** +** For some versions of GCC on 32-bit machines, if you do the more obvious +** comparison of "r1==(double)i" you sometimes get an answer of false even +** though the r1 and (double)i values are bit-for-bit the same. +*/ +static int sqlite3RealSameAsInt(double r1, sqlite3_int64 i){ + double r2 = (double)i; + return memcmp(&r1, &r2, sizeof(r1))==0; +} + /* ** Convert pMem so that it has types MEM_Real or MEM_Int or both. ** Invalidate any prior representations. @@ -70000,14 +73640,21 @@ SQLITE_PRIVATE int sqlite3VdbeMemRealify(Mem *pMem){ */ SQLITE_PRIVATE int sqlite3VdbeMemNumerify(Mem *pMem){ if( (pMem->flags & (MEM_Int|MEM_Real|MEM_Null))==0 ){ + int rc; assert( (pMem->flags & (MEM_Blob|MEM_Str))!=0 ); assert( pMem->db==0 || sqlite3_mutex_held(pMem->db->mutex) ); - if( 0==sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc) ){ + rc = sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc); + if( rc==0 ){ MemSetTypeFlag(pMem, MEM_Int); }else{ - pMem->u.r = sqlite3VdbeRealValue(pMem); - MemSetTypeFlag(pMem, MEM_Real); - sqlite3VdbeIntegerAffinity(pMem); + i64 i = pMem->u.i; + sqlite3AtoF(pMem->z, &pMem->u.r, pMem->n, pMem->enc); + if( rc==1 && sqlite3RealSameAsInt(pMem->u.r, i) ){ + pMem->u.i = i; + MemSetTypeFlag(pMem, MEM_Int); + }else{ + MemSetTypeFlag(pMem, MEM_Real); + } } } assert( (pMem->flags & (MEM_Int|MEM_Real|MEM_Null))!=0 ); @@ -70133,6 +73780,27 @@ SQLITE_PRIVATE void sqlite3VdbeMemSetInt64(Mem *pMem, i64 val){ } } +/* A no-op destructor */ +SQLITE_PRIVATE void sqlite3NoopDestructor(void *p){ UNUSED_PARAMETER(p); } + +/* +** Set the value stored in *pMem should already be a NULL. +** Also store a pointer to go with it. +*/ +SQLITE_PRIVATE void sqlite3VdbeMemSetPointer( + Mem *pMem, + void *pPtr, + const char *zPType, + void (*xDestructor)(void*) +){ + assert( pMem->flags==MEM_Null ); + pMem->u.zPType = zPType ? zPType : ""; + pMem->z = pPtr; + pMem->flags = MEM_Null|MEM_Dyn|MEM_Subtype|MEM_Term; + pMem->eSubtype = 'p'; + pMem->xDel = xDestructor ? xDestructor : sqlite3NoopDestructor; +} + #ifndef SQLITE_OMIT_FLOATING_POINT /* ** Delete any previous value and set the value stored in *pMem to val, @@ -70313,7 +73981,7 @@ SQLITE_PRIVATE int sqlite3VdbeMemSetStr( if( nByte<0 ){ assert( enc!=0 ); if( enc==SQLITE_UTF8 ){ - nByte = sqlite3Strlen30(z); + nByte = 0x7fffffff & (int)strlen(z); if( nByte>iLimit ) nByte = iLimit+1; }else{ for(nByte=0; nByte<=iLimit && (z[nByte] | z[nByte+1]); nByte+=2){} @@ -70391,12 +74059,11 @@ static SQLITE_NOINLINE int vdbeMemFromBtreeResize( ){ int rc; pMem->flags = MEM_Null; - if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+2)) ){ + if( SQLITE_OK==(rc = sqlite3VdbeMemClearAndResize(pMem, amt+1)) ){ rc = sqlite3BtreePayload(pCur, offset, amt, pMem->z); if( rc==SQLITE_OK ){ - pMem->z[amt] = 0; - pMem->z[amt+1] = 0; - pMem->flags = MEM_Blob|MEM_Term; + pMem->z[amt] = 0; /* Overrun area used when reading malformed records */ + pMem->flags = MEM_Blob; pMem->n = (int)amt; }else{ sqlite3VdbeMemRelease(pMem); @@ -70465,6 +74132,7 @@ static SQLITE_NOINLINE const void *valueToText(sqlite3_value* pVal, u8 enc){ assert(pVal->enc==(enc & ~SQLITE_UTF16_ALIGNED) || pVal->db==0 || pVal->db->mallocFailed ); if( pVal->enc==(enc & ~SQLITE_UTF16_ALIGNED) ){ + assert( sqlite3VdbeMemConsistentDualRep(pVal) ); return pVal->z; }else{ return 0; @@ -70487,6 +74155,7 @@ SQLITE_PRIVATE const void *sqlite3ValueText(sqlite3_value* pVal, u8 enc){ assert( (enc&3)==(enc&~SQLITE_UTF16_ALIGNED) ); assert( (pVal->flags & MEM_RowSet)==0 ); if( (pVal->flags&(MEM_Str|MEM_Term))==(MEM_Str|MEM_Term) && pVal->enc==enc ){ + assert( sqlite3VdbeMemConsistentDualRep(pVal) ); return pVal->z; } if( pVal->flags&MEM_Null ){ @@ -70545,7 +74214,7 @@ static sqlite3_value *valueNew(sqlite3 *db, struct ValueNewStat4Ctx *p){ if( pRec ){ pRec->pKeyInfo = sqlite3KeyInfoOfIndex(p->pParse, pIdx); if( pRec->pKeyInfo ){ - assert( pRec->pKeyInfo->nField+pRec->pKeyInfo->nXField==nCol ); + assert( pRec->pKeyInfo->nAllField==nCol ); assert( pRec->pKeyInfo->enc==ENC(db) ); pRec->aMem = (Mem *)((u8*)pRec + ROUND8(sizeof(UnpackedRecord))); for(i=0; i<nCol; i++){ @@ -70553,7 +74222,7 @@ static sqlite3_value *valueNew(sqlite3 *db, struct ValueNewStat4Ctx *p){ pRec->aMem[i].db = db; } }else{ - sqlite3DbFree(db, pRec); + sqlite3DbFreeNN(db, pRec); pRec = 0; } } @@ -70665,7 +74334,7 @@ static int valueFromFunction( for(i=0; i<nVal; i++){ sqlite3ValueFree(apVal[i]); } - sqlite3DbFree(db, apVal); + sqlite3DbFreeNN(db, apVal); } *ppVal = pVal; @@ -70702,7 +74371,11 @@ static int valueFromExpr( assert( pExpr!=0 ); while( (op = pExpr->op)==TK_UPLUS || op==TK_SPAN ) pExpr = pExpr->pLeft; +#if defined(SQLITE_ENABLE_STAT3_OR_STAT4) + if( op==TK_REGISTER ) op = pExpr->op2; +#else if( NEVER(op==TK_REGISTER) ) op = pExpr->op2; +#endif /* Compressed expressions only appear when parsing the DEFAULT clause ** on a table column definition, and hence only when pCtx==0. This @@ -70753,7 +74426,7 @@ static int valueFromExpr( } }else if( op==TK_UMINUS ) { /* This branch happens for multiple negative signs. Ex: -(-5) */ - if( SQLITE_OK==sqlite3ValueFromExpr(db,pExpr->pLeft,enc,affinity,&pVal) + if( SQLITE_OK==valueFromExpr(db,pExpr->pLeft,enc,affinity,&pVal,pCtx) && pVal!=0 ){ sqlite3VdbeMemNumerify(pVal); @@ -70786,18 +74459,25 @@ static int valueFromExpr( 0, SQLITE_DYNAMIC); } #endif - #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 else if( op==TK_FUNCTION && pCtx!=0 ){ rc = valueFromFunction(db, pExpr, enc, affinity, &pVal, pCtx); } #endif + else if( op==TK_TRUEFALSE ){ + pVal = valueNew(db, pCtx); + pVal->flags = MEM_Int; + pVal->u.i = pExpr->u.zToken[4]==0; + } *ppVal = pVal; return rc; no_mem: - sqlite3OomFault(db); +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( pCtx==0 || pCtx->pParse->nErr==0 ) +#endif + sqlite3OomFault(db); sqlite3DbFree(db, zVal); assert( *ppVal==0 ); #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 @@ -70864,7 +74544,7 @@ static void recordFunc( putVarint32(&aRet[1], iSerial); sqlite3VdbeSerialPut(&aRet[1+nSerial], argv[0], iSerial); sqlite3_result_blob(context, aRet, nRet, SQLITE_TRANSIENT); - sqlite3DbFree(db, aRet); + sqlite3DbFreeNN(db, aRet); } } @@ -70910,14 +74590,13 @@ static int stat4ValueFromExpr( /* Skip over any TK_COLLATE nodes */ pExpr = sqlite3ExprSkipCollate(pExpr); + assert( pExpr==0 || pExpr->op!=TK_REGISTER || pExpr->op2!=TK_VARIABLE ); if( !pExpr ){ pVal = valueNew(db, pAlloc); if( pVal ){ sqlite3VdbeMemSetNull((Mem*)pVal); } - }else if( pExpr->op==TK_VARIABLE - || NEVER(pExpr->op==TK_REGISTER && pExpr->op2==TK_VARIABLE) - ){ + }else if( pExpr->op==TK_VARIABLE && (db->flags & SQLITE_EnableQPSG)==0 ){ Vdbe *v; int iBindVar = pExpr->iColumn; sqlite3VdbeSetVarmask(pParse->pVdbe, iBindVar); @@ -70925,9 +74604,7 @@ static int stat4ValueFromExpr( pVal = valueNew(db, pAlloc); if( pVal ){ rc = sqlite3VdbeMemCopy((Mem*)pVal, &v->aVar[iBindVar-1]); - if( rc==SQLITE_OK ){ - sqlite3ValueApplyAffinity(pVal, affinity, ENC(db)); - } + sqlite3ValueApplyAffinity(pVal, affinity, ENC(db)); pVal->db = pParse->db; } } @@ -71084,14 +74761,14 @@ SQLITE_PRIVATE int sqlite3Stat4Column( SQLITE_PRIVATE void sqlite3Stat4ProbeFree(UnpackedRecord *pRec){ if( pRec ){ int i; - int nCol = pRec->pKeyInfo->nField+pRec->pKeyInfo->nXField; + int nCol = pRec->pKeyInfo->nAllField; Mem *aMem = pRec->aMem; sqlite3 *db = aMem[0].db; for(i=0; i<nCol; i++){ sqlite3VdbeMemRelease(&aMem[i]); } sqlite3KeyInfoUnref(pRec->pKeyInfo); - sqlite3DbFree(db, pRec); + sqlite3DbFreeNN(db, pRec); } } #endif /* ifdef SQLITE_ENABLE_STAT4 */ @@ -71115,7 +74792,7 @@ SQLITE_PRIVATE void sqlite3ValueSetStr( SQLITE_PRIVATE void sqlite3ValueFree(sqlite3_value *v){ if( !v ) return; sqlite3VdbeMemRelease((Mem *)v); - sqlite3DbFree(((Mem*)v)->db, v); + sqlite3DbFreeNN(((Mem*)v)->db, v); } /* @@ -71180,10 +74857,12 @@ SQLITE_PRIVATE Vdbe *sqlite3VdbeCreate(Parse *pParse){ db->pVdbe = p; p->magic = VDBE_MAGIC_INIT; p->pParse = pParse; + pParse->pVdbe = p; assert( pParse->aLabel==0 ); assert( pParse->nLabel==0 ); assert( pParse->nOpAlloc==0 ); assert( pParse->szOpAlloc==0 ); + sqlite3VdbeAddOp2(p, OP_Init, 0, 1); return p; } @@ -71201,15 +74880,14 @@ SQLITE_PRIVATE void sqlite3VdbeError(Vdbe *p, const char *zFormat, ...){ /* ** Remember the SQL string for a prepared statement. */ -SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe *p, const char *z, int n, int isPrepareV2){ - assert( isPrepareV2==1 || isPrepareV2==0 ); +SQLITE_PRIVATE void sqlite3VdbeSetSql(Vdbe *p, const char *z, int n, u8 prepFlags){ if( p==0 ) return; -#if defined(SQLITE_OMIT_TRACE) && !defined(SQLITE_ENABLE_SQLLOG) - if( !isPrepareV2 ) return; -#endif + p->prepFlags = prepFlags; + if( (prepFlags & SQLITE_PREPARE_SAVESQL)==0 ){ + p->expmask = 0; + } assert( p->zSql==0 ); p->zSql = sqlite3DbStrNDup(p->db, z, n); - p->isPrepareV2 = (u8)isPrepareV2; } /* @@ -71231,7 +74909,10 @@ SQLITE_PRIVATE void sqlite3VdbeSwap(Vdbe *pA, Vdbe *pB){ zTmp = pA->zSql; pA->zSql = pB->zSql; pB->zSql = zTmp; - pB->isPrepareV2 = pA->isPrepareV2; + pB->expmask = pA->expmask; + pB->prepFlags = pA->prepFlags; + memcpy(pB->aCounter, pA->aCounter, sizeof(pB->aCounter)); + pB->aCounter[SQLITE_STMTSTATUS_REPREPARE]++; } /* @@ -71262,6 +74943,12 @@ static int growOpArray(Vdbe *v, int nOp){ UNUSED_PARAMETER(nOp); #endif + /* Ensure that the size of a VDBE does not grow too large */ + if( nNew > p->db->aLimit[SQLITE_LIMIT_VDBE_OP] ){ + sqlite3OomFault(p->db); + return SQLITE_NOMEM; + } + assert( nOp<=(1024/sizeof(Op)) ); assert( nNew>=(p->nOpAlloc+nOp) ); pNew = sqlite3DbRealloc(p->db, v->aOp, nNew*sizeof(Op)); @@ -71381,6 +75068,9 @@ SQLITE_PRIVATE int sqlite3VdbeLoadString(Vdbe *p, int iDest, const char *zStr){ ** "s" character in zTypes[], the register is a string if the argument is ** not NULL, or OP_Null if the value is a null pointer. For each "i" character ** in zTypes[], the register is initialized to an integer. +** +** If the input string does not end with "X" then an OP_ResultRow instruction +** is generated for the values inserted. */ SQLITE_PRIVATE void sqlite3VdbeMultiLoad(Vdbe *p, int iDest, const char *zTypes, ...){ va_list ap; @@ -71390,12 +75080,15 @@ SQLITE_PRIVATE void sqlite3VdbeMultiLoad(Vdbe *p, int iDest, const char *zTypes, for(i=0; (c = zTypes[i])!=0; i++){ if( c=='s' ){ const char *z = va_arg(ap, const char*); - sqlite3VdbeAddOp4(p, z==0 ? OP_Null : OP_String8, 0, iDest++, 0, z, 0); + sqlite3VdbeAddOp4(p, z==0 ? OP_Null : OP_String8, 0, iDest+i, 0, z, 0); + }else if( c=='i' ){ + sqlite3VdbeAddOp2(p, OP_Integer, va_arg(ap, int), iDest+i); }else{ - assert( c=='i' ); - sqlite3VdbeAddOp2(p, OP_Integer, va_arg(ap, int), iDest++); + goto skip_op_resultrow; } } + sqlite3VdbeAddOp2(p, OP_ResultRow, iDest, i); +skip_op_resultrow: va_end(ap); } @@ -71434,6 +75127,49 @@ SQLITE_PRIVATE int sqlite3VdbeAddOp4Dup8( return sqlite3VdbeAddOp4(p, op, p1, p2, p3, p4copy, p4type); } +#ifndef SQLITE_OMIT_EXPLAIN +/* +** Return the address of the current EXPLAIN QUERY PLAN baseline. +** 0 means "none". +*/ +SQLITE_PRIVATE int sqlite3VdbeExplainParent(Parse *pParse){ + VdbeOp *pOp; + if( pParse->addrExplain==0 ) return 0; + pOp = sqlite3VdbeGetOp(pParse->pVdbe, pParse->addrExplain); + return pOp->p2; +} + +/* +** Add a new OP_Explain opcode. +** +** If the bPush flag is true, then make this opcode the parent for +** subsequent Explains until sqlite3VdbeExplainPop() is called. +*/ +SQLITE_PRIVATE void sqlite3VdbeExplain(Parse *pParse, u8 bPush, const char *zFmt, ...){ + if( pParse->explain==2 ){ + char *zMsg; + Vdbe *v = pParse->pVdbe; + va_list ap; + int iThis; + va_start(ap, zFmt); + zMsg = sqlite3VMPrintf(pParse->db, zFmt, ap); + va_end(ap); + v = pParse->pVdbe; + iThis = v->nOp; + sqlite3VdbeAddOp4(v, OP_Explain, iThis, pParse->addrExplain, 0, + zMsg, P4_DYNAMIC); + if( bPush) pParse->addrExplain = iThis; + } +} + +/* +** Pop the EXPLAIN QUERY PLAN stack one level. +*/ +SQLITE_PRIVATE void sqlite3VdbeExplainPop(Parse *pParse){ + pParse->addrExplain = sqlite3VdbeExplainParent(pParse); +} +#endif /* SQLITE_OMIT_EXPLAIN */ + /* ** Add an OP_ParseSchema opcode. This routine is broken out from ** sqlite3VdbeAddOp4() since it needs to also needs to mark all btrees @@ -71523,10 +75259,29 @@ SQLITE_PRIVATE void sqlite3VdbeResolveLabel(Vdbe *v, int x){ assert( j<p->nLabel ); assert( j>=0 ); if( p->aLabel ){ +#ifdef SQLITE_DEBUG + if( p->db->flags & SQLITE_VdbeAddopTrace ){ + printf("RESOLVE LABEL %d to %d\n", x, v->nOp); + } +#endif + assert( p->aLabel[j]==(-1) ); /* Labels may only be resolved once */ p->aLabel[j] = v->nOp; } } +#ifdef SQLITE_COVERAGE_TEST +/* +** Return TRUE if and only if the label x has already been resolved. +** Return FALSE (zero) if label x is still unresolved. +** +** This routine is only used inside of testcase() macros, and so it +** only exists when measuring test coverage. +*/ +SQLITE_PRIVATE int sqlite3VdbeLabelHasBeenResolved(Vdbe *v, int x){ + return v->pParse->aLabel && v->pParse->aLabel[ADDR(x)]>=0; +} +#endif /* SQLITE_COVERAGE_TEST */ + /* ** Mark the VDBE as one that can only be run one time. */ @@ -71623,7 +75378,8 @@ static Op *opIterNext(VdbeOpIter *p){ ** * OP_VUpdate ** * OP_VRename ** * OP_FkCounter with P2==0 (immediate foreign key constraint) -** * OP_CreateTable and OP_InitCoroutine (for CREATE TABLE AS SELECT ...) +** * OP_CreateBtree/BTREE_INTKEY and OP_InitCoroutine +** (for CREATE TABLE AS SELECT ...) ** ** Then check that the value of Parse.mayAbort is true if an ** ABORT may be thrown, or false otherwise. Return true if it does @@ -71651,7 +75407,7 @@ SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *v, int mayAbort){ hasAbort = 1; break; } - if( opcode==OP_CreateTable ) hasCreateTable = 1; + if( opcode==OP_CreateBtree && pOp->p3==BTREE_INTKEY ) hasCreateTable = 1; if( opcode==OP_InitCoroutine ) hasInitCoroutine = 1; #ifndef SQLITE_OMIT_FOREIGN_KEY if( opcode==OP_FkCounter && pOp->p1==0 && pOp->p2==1 ){ @@ -71671,6 +75427,32 @@ SQLITE_PRIVATE int sqlite3VdbeAssertMayAbort(Vdbe *v, int mayAbort){ } #endif /* SQLITE_DEBUG - the sqlite3AssertMayAbort() function */ +#ifdef SQLITE_DEBUG +/* +** Increment the nWrite counter in the VDBE if the cursor is not an +** ephemeral cursor, or if the cursor argument is NULL. +*/ +SQLITE_PRIVATE void sqlite3VdbeIncrWriteCounter(Vdbe *p, VdbeCursor *pC){ + if( pC==0 + || (pC->eCurType!=CURTYPE_SORTER + && pC->eCurType!=CURTYPE_PSEUDO + && !pC->isEphemeral) + ){ + p->nWrite++; + } +} +#endif + +#ifdef SQLITE_DEBUG +/* +** Assert if an Abort at this point in time might result in a corrupt +** database. +*/ +SQLITE_PRIVATE void sqlite3VdbeAssertAbortable(Vdbe *p){ + assert( p->nWrite==0 || p->usesStmtJournal ); +} +#endif + /* ** This routine is called after all opcodes have been inserted. It loops ** through all the opcodes and fixes up some details. @@ -71730,6 +75512,27 @@ static void resolveP2Values(Vdbe *p, int *pMaxFuncArgs){ p->bIsReader = 1; break; } + case OP_Next: + case OP_NextIfOpen: + case OP_SorterNext: { + pOp->p4.xAdvance = sqlite3BtreeNext; + pOp->p4type = P4_ADVANCE; + /* The code generator never codes any of these opcodes as a jump + ** to a label. They are always coded as a jump backwards to a + ** known address */ + assert( pOp->p2>=0 ); + break; + } + case OP_Prev: + case OP_PrevIfOpen: { + pOp->p4.xAdvance = sqlite3BtreePrevious; + pOp->p4type = P4_ADVANCE; + /* The code generator never codes any of these opcodes as a jump + ** to a label. They are always coded as a jump backwards to a + ** known address */ + assert( pOp->p2>=0 ); + break; + } #ifndef SQLITE_OMIT_VIRTUALTABLE case OP_VUpdate: { if( pOp->p2>nMaxArgs ) nMaxArgs = pOp->p2; @@ -71741,27 +75544,25 @@ static void resolveP2Values(Vdbe *p, int *pMaxFuncArgs){ assert( pOp[-1].opcode==OP_Integer ); n = pOp[-1].p1; if( n>nMaxArgs ) nMaxArgs = n; - break; + /* Fall through into the default case */ } #endif - case OP_Next: - case OP_NextIfOpen: - case OP_SorterNext: { - pOp->p4.xAdvance = sqlite3BtreeNext; - pOp->p4type = P4_ADVANCE; - break; - } - case OP_Prev: - case OP_PrevIfOpen: { - pOp->p4.xAdvance = sqlite3BtreePrevious; - pOp->p4type = P4_ADVANCE; + default: { + if( pOp->p2<0 ){ + /* The mkopcodeh.tcl script has so arranged things that the only + ** non-jump opcodes less than SQLITE_MX_JUMP_CODE are guaranteed to + ** have non-negative values for P2. */ + assert( (sqlite3OpcodeProperty[pOp->opcode] & OPFLG_JUMP)!=0 ); + assert( ADDR(pOp->p2)<pParse->nLabel ); + pOp->p2 = aLabel[ADDR(pOp->p2)]; + } break; } } - if( (sqlite3OpcodeProperty[pOp->opcode] & OPFLG_JUMP)!=0 && pOp->p2<0 ){ - assert( ADDR(pOp->p2)<pParse->nLabel ); - pOp->p2 = aLabel[ADDR(pOp->p2)]; - } + /* The mkopcodeh.tcl script has so arranged things that the only + ** non-jump opcodes less than SQLITE_MX_JUMP_CODE are guaranteed to + ** have non-negative values for P2. */ + assert( (sqlite3OpcodeProperty[pOp->opcode]&OPFLG_JUMP)==0 || pOp->p2>=0); } if( pOp==p->aOp ) break; pOp--; @@ -71812,6 +75613,17 @@ SQLITE_PRIVATE void sqlite3VdbeVerifyNoResultRow(Vdbe *p){ #endif /* +** Generate code (a single OP_Abortable opcode) that will +** verify that the VDBE program can safely call Abort in the current +** context. +*/ +#if defined(SQLITE_DEBUG) +SQLITE_PRIVATE void sqlite3VdbeVerifyAbortable(Vdbe *p, int onError){ + if( onError==OE_Abort ) sqlite3VdbeAddOp0(p, OP_Abortable); +} +#endif + +/* ** This function returns a pointer to the array of opcodes associated with ** the Vdbe passed as the first argument. It is the callers responsibility ** to arrange for the returned array to be eventually freed using the @@ -71950,7 +75762,7 @@ SQLITE_PRIVATE void sqlite3VdbeJumpHere(Vdbe *p, int addr){ */ static void freeEphemeralFunction(sqlite3 *db, FuncDef *pDef){ if( (pDef->funcFlags & SQLITE_FUNC_EPHEM)!=0 ){ - sqlite3DbFree(db, pDef); + sqlite3DbFreeNN(db, pDef); } } @@ -71961,11 +75773,11 @@ static void vdbeFreeOpArray(sqlite3 *, Op *, int); */ static SQLITE_NOINLINE void freeP4Mem(sqlite3 *db, Mem *p){ if( p->szMalloc ) sqlite3DbFree(db, p->zMalloc); - sqlite3DbFree(db, p); + sqlite3DbFreeNN(db, p); } static SQLITE_NOINLINE void freeP4FuncCtx(sqlite3 *db, sqlite3_context *p){ freeEphemeralFunction(db, p->pFunc); - sqlite3DbFree(db, p); + sqlite3DbFreeNN(db, p); } static void freeP4(sqlite3 *db, int p4type, void *p4){ assert( db ); @@ -71977,6 +75789,7 @@ static void freeP4(sqlite3 *db, int p4type, void *p4){ case P4_REAL: case P4_INT64: case P4_DYNAMIC: + case P4_DYNBLOB: case P4_INTARRAY: { sqlite3DbFree(db, p4); break; @@ -72018,14 +75831,14 @@ static void freeP4(sqlite3 *db, int p4type, void *p4){ static void vdbeFreeOpArray(sqlite3 *db, Op *aOp, int nOp){ if( aOp ){ Op *pOp; - for(pOp=aOp; pOp<&aOp[nOp]; pOp++){ - if( pOp->p4type ) freeP4(db, pOp->p4type, pOp->p4.p); + for(pOp=&aOp[nOp-1]; pOp>=aOp; pOp--){ + if( pOp->p4type <= P4_FREE_IF_LE ) freeP4(db, pOp->p4type, pOp->p4.p); #ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS sqlite3DbFree(db, pOp->zComment); #endif } + sqlite3DbFreeNN(db, aOp); } - sqlite3DbFree(db, aOp); } /* @@ -72354,23 +76167,23 @@ static void displayP4Expr(StrAccum *p, Expr *pExpr){ const char *zOp = 0; switch( pExpr->op ){ case TK_STRING: - sqlite3XPrintf(p, "%Q", pExpr->u.zToken); + sqlite3_str_appendf(p, "%Q", pExpr->u.zToken); break; case TK_INTEGER: - sqlite3XPrintf(p, "%d", pExpr->u.iValue); + sqlite3_str_appendf(p, "%d", pExpr->u.iValue); break; case TK_NULL: - sqlite3XPrintf(p, "NULL"); + sqlite3_str_appendf(p, "NULL"); break; case TK_REGISTER: { - sqlite3XPrintf(p, "r[%d]", pExpr->iTable); + sqlite3_str_appendf(p, "r[%d]", pExpr->iTable); break; } case TK_COLUMN: { if( pExpr->iColumn<0 ){ - sqlite3XPrintf(p, "rowid"); + sqlite3_str_appendf(p, "rowid"); }else{ - sqlite3XPrintf(p, "c%d", (int)pExpr->iColumn); + sqlite3_str_appendf(p, "c%d", (int)pExpr->iColumn); } break; } @@ -72402,18 +76215,18 @@ static void displayP4Expr(StrAccum *p, Expr *pExpr){ case TK_NOTNULL: zOp = "NOTNULL"; break; default: - sqlite3XPrintf(p, "%s", "expr"); + sqlite3_str_appendf(p, "%s", "expr"); break; } if( zOp ){ - sqlite3XPrintf(p, "%s(", zOp); + sqlite3_str_appendf(p, "%s(", zOp); displayP4Expr(p, pExpr->pLeft); if( pExpr->pRight ){ - sqlite3StrAccumAppend(p, ",", 1); + sqlite3_str_append(p, ",", 1); displayP4Expr(p, pExpr->pRight); } - sqlite3StrAccumAppend(p, ")", 1); + sqlite3_str_append(p, ")", 1); } } #endif /* VDBE_DISPLAY_P4 && defined(SQLITE_ENABLE_CURSOR_HINTS) */ @@ -72434,14 +76247,15 @@ static char *displayP4(Op *pOp, char *zTemp, int nTemp){ int j; KeyInfo *pKeyInfo = pOp->p4.pKeyInfo; assert( pKeyInfo->aSortOrder!=0 ); - sqlite3XPrintf(&x, "k(%d", pKeyInfo->nField); - for(j=0; j<pKeyInfo->nField; j++){ + sqlite3_str_appendf(&x, "k(%d", pKeyInfo->nKeyField); + for(j=0; j<pKeyInfo->nKeyField; j++){ CollSeq *pColl = pKeyInfo->aColl[j]; const char *zColl = pColl ? pColl->zName : ""; if( strcmp(zColl, "BINARY")==0 ) zColl = "B"; - sqlite3XPrintf(&x, ",%s%s", pKeyInfo->aSortOrder[j] ? "-" : "", zColl); + sqlite3_str_appendf(&x, ",%s%s", + pKeyInfo->aSortOrder[j] ? "-" : "", zColl); } - sqlite3StrAccumAppend(&x, ")", 1); + sqlite3_str_append(&x, ")", 1); break; } #ifdef SQLITE_ENABLE_CURSOR_HINTS @@ -72452,31 +76266,31 @@ static char *displayP4(Op *pOp, char *zTemp, int nTemp){ #endif case P4_COLLSEQ: { CollSeq *pColl = pOp->p4.pColl; - sqlite3XPrintf(&x, "(%.20s)", pColl->zName); + sqlite3_str_appendf(&x, "(%.20s)", pColl->zName); break; } case P4_FUNCDEF: { FuncDef *pDef = pOp->p4.pFunc; - sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg); + sqlite3_str_appendf(&x, "%s(%d)", pDef->zName, pDef->nArg); break; } #if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) case P4_FUNCCTX: { FuncDef *pDef = pOp->p4.pCtx->pFunc; - sqlite3XPrintf(&x, "%s(%d)", pDef->zName, pDef->nArg); + sqlite3_str_appendf(&x, "%s(%d)", pDef->zName, pDef->nArg); break; } #endif case P4_INT64: { - sqlite3XPrintf(&x, "%lld", *pOp->p4.pI64); + sqlite3_str_appendf(&x, "%lld", *pOp->p4.pI64); break; } case P4_INT32: { - sqlite3XPrintf(&x, "%d", pOp->p4.i); + sqlite3_str_appendf(&x, "%d", pOp->p4.i); break; } case P4_REAL: { - sqlite3XPrintf(&x, "%.16g", *pOp->p4.pReal); + sqlite3_str_appendf(&x, "%.16g", *pOp->p4.pReal); break; } case P4_MEM: { @@ -72484,9 +76298,9 @@ static char *displayP4(Op *pOp, char *zTemp, int nTemp){ if( pMem->flags & MEM_Str ){ zP4 = pMem->z; }else if( pMem->flags & MEM_Int ){ - sqlite3XPrintf(&x, "%lld", pMem->u.i); + sqlite3_str_appendf(&x, "%lld", pMem->u.i); }else if( pMem->flags & MEM_Real ){ - sqlite3XPrintf(&x, "%.16g", pMem->u.r); + sqlite3_str_appendf(&x, "%.16g", pMem->u.r); }else if( pMem->flags & MEM_Null ){ zP4 = "NULL"; }else{ @@ -72498,7 +76312,7 @@ static char *displayP4(Op *pOp, char *zTemp, int nTemp){ #ifndef SQLITE_OMIT_VIRTUALTABLE case P4_VTAB: { sqlite3_vtab *pVtab = pOp->p4.pVtab->pVtab; - sqlite3XPrintf(&x, "vtab:%p", pVtab); + sqlite3_str_appendf(&x, "vtab:%p", pVtab); break; } #endif @@ -72507,23 +76321,24 @@ static char *displayP4(Op *pOp, char *zTemp, int nTemp){ int *ai = pOp->p4.ai; int n = ai[0]; /* The first element of an INTARRAY is always the ** count of the number of elements to follow */ - for(i=1; i<n; i++){ - sqlite3XPrintf(&x, ",%d", ai[i]); + for(i=1; i<=n; i++){ + sqlite3_str_appendf(&x, ",%d", ai[i]); } zTemp[0] = '['; - sqlite3StrAccumAppend(&x, "]", 1); + sqlite3_str_append(&x, "]", 1); break; } case P4_SUBPROGRAM: { - sqlite3XPrintf(&x, "program"); + sqlite3_str_appendf(&x, "program"); break; } + case P4_DYNBLOB: case P4_ADVANCE: { zTemp[0] = 0; break; } case P4_TABLE: { - sqlite3XPrintf(&x, "%s", pOp->p4.pTab->zName); + sqlite3_str_appendf(&x, "%s", pOp->p4.pTab->zName); break; } default: { @@ -72698,7 +76513,7 @@ static void releaseMemArray(Mem *p, int N){ if( p->flags&(MEM_Agg|MEM_Dyn|MEM_Frame|MEM_RowSet) ){ sqlite3VdbeMemRelease(p); }else if( p->szMalloc ){ - sqlite3DbFree(db, p->zMalloc); + sqlite3DbFreeNN(db, p->zMalloc); p->szMalloc = 0; } @@ -72735,6 +76550,9 @@ SQLITE_PRIVATE void sqlite3VdbeFrameDelete(VdbeFrame *p){ ** p->explain==2, only OP_Explain instructions are listed and these ** are shown in a different format. p->explain==2 is used to implement ** EXPLAIN QUERY PLAN. +** 2018-04-24: In p->explain==2 mode, the OP_Init opcodes of triggers +** are also shown, so that the boundaries between the main program and +** each trigger are clear. ** ** When p->explain==1, first the main program is listed, then each of ** the trigger subprograms are listed one by one. @@ -72750,6 +76568,8 @@ SQLITE_PRIVATE int sqlite3VdbeList( int i; /* Loop counter */ int rc = SQLITE_OK; /* Return code */ Mem *pMem = &p->aMem[1]; /* First Mem of result set */ + int bListSubprogs = (p->explain==1 || (db->flags & SQLITE_TriggerEQP)!=0); + Op *pOp = 0; assert( p->explain ); assert( p->magic==VDBE_MAGIC_RUN ); @@ -72762,7 +76582,7 @@ SQLITE_PRIVATE int sqlite3VdbeList( releaseMemArray(pMem, 8); p->pResultSet = 0; - if( p->rc==SQLITE_NOMEM_BKPT ){ + if( p->rc==SQLITE_NOMEM ){ /* This happens if a malloc() inside a call to sqlite3_column_text() or ** sqlite3_column_text16() failed. */ sqlite3OomFault(db); @@ -72777,7 +76597,7 @@ SQLITE_PRIVATE int sqlite3VdbeList( ** encountered, but p->pc will eventually catch up to nRow. */ nRow = p->nOp; - if( p->explain==1 ){ + if( bListSubprogs ){ /* The first 8 memory cells are used for the result set. So we will ** commandeer the 9th cell to use as storage for an array of pointers ** to trigger subprograms. The VDBE is guaranteed to have at least 9 @@ -72795,19 +76615,13 @@ SQLITE_PRIVATE int sqlite3VdbeList( } } - do{ + while(1){ /* Loop exits via break */ i = p->pc++; - }while( i<nRow && p->explain==2 && p->aOp[i].opcode!=OP_Explain ); - if( i>=nRow ){ - p->rc = SQLITE_OK; - rc = SQLITE_DONE; - }else if( db->u1.isInterrupted ){ - p->rc = SQLITE_INTERRUPT; - rc = SQLITE_ERROR; - sqlite3VdbeError(p, sqlite3ErrStr(p->rc)); - }else{ - char *zP4; - Op *pOp; + if( i>=nRow ){ + p->rc = SQLITE_OK; + rc = SQLITE_DONE; + break; + } if( i<p->nOp ){ /* The output line number is small enough that we are still in the ** main program. */ @@ -72822,94 +76636,113 @@ SQLITE_PRIVATE int sqlite3VdbeList( } pOp = &apSub[j]->aOp[i]; } - if( p->explain==1 ){ - pMem->flags = MEM_Int; - pMem->u.i = i; /* Program counter */ - pMem++; - - pMem->flags = MEM_Static|MEM_Str|MEM_Term; - pMem->z = (char*)sqlite3OpcodeName(pOp->opcode); /* Opcode */ - assert( pMem->z!=0 ); - pMem->n = sqlite3Strlen30(pMem->z); - pMem->enc = SQLITE_UTF8; - pMem++; - /* When an OP_Program opcode is encounter (the only opcode that has - ** a P4_SUBPROGRAM argument), expand the size of the array of subprograms - ** kept in p->aMem[9].z to hold the new program - assuming this subprogram - ** has not already been seen. - */ - if( pOp->p4type==P4_SUBPROGRAM ){ - int nByte = (nSub+1)*sizeof(SubProgram*); - int j; - for(j=0; j<nSub; j++){ - if( apSub[j]==pOp->p4.pProgram ) break; - } - if( j==nSub && SQLITE_OK==sqlite3VdbeMemGrow(pSub, nByte, nSub!=0) ){ - apSub = (SubProgram **)pSub->z; - apSub[nSub++] = pOp->p4.pProgram; - pSub->flags |= MEM_Blob; - pSub->n = nSub*sizeof(SubProgram*); + /* When an OP_Program opcode is encounter (the only opcode that has + ** a P4_SUBPROGRAM argument), expand the size of the array of subprograms + ** kept in p->aMem[9].z to hold the new program - assuming this subprogram + ** has not already been seen. + */ + if( bListSubprogs && pOp->p4type==P4_SUBPROGRAM ){ + int nByte = (nSub+1)*sizeof(SubProgram*); + int j; + for(j=0; j<nSub; j++){ + if( apSub[j]==pOp->p4.pProgram ) break; + } + if( j==nSub ){ + p->rc = sqlite3VdbeMemGrow(pSub, nByte, nSub!=0); + if( p->rc!=SQLITE_OK ){ + rc = SQLITE_ERROR; + break; } + apSub = (SubProgram **)pSub->z; + apSub[nSub++] = pOp->p4.pProgram; + pSub->flags |= MEM_Blob; + pSub->n = nSub*sizeof(SubProgram*); + nRow += pOp->p4.pProgram->nOp; } } + if( p->explain<2 ) break; + if( pOp->opcode==OP_Explain ) break; + if( pOp->opcode==OP_Init && p->pc>1 ) break; + } - pMem->flags = MEM_Int; - pMem->u.i = pOp->p1; /* P1 */ - pMem++; + if( rc==SQLITE_OK ){ + if( db->u1.isInterrupted ){ + p->rc = SQLITE_INTERRUPT; + rc = SQLITE_ERROR; + sqlite3VdbeError(p, sqlite3ErrStr(p->rc)); + }else{ + char *zP4; + if( p->explain==1 ){ + pMem->flags = MEM_Int; + pMem->u.i = i; /* Program counter */ + pMem++; + + pMem->flags = MEM_Static|MEM_Str|MEM_Term; + pMem->z = (char*)sqlite3OpcodeName(pOp->opcode); /* Opcode */ + assert( pMem->z!=0 ); + pMem->n = sqlite3Strlen30(pMem->z); + pMem->enc = SQLITE_UTF8; + pMem++; + } - pMem->flags = MEM_Int; - pMem->u.i = pOp->p2; /* P2 */ - pMem++; + pMem->flags = MEM_Int; + pMem->u.i = pOp->p1; /* P1 */ + pMem++; - pMem->flags = MEM_Int; - pMem->u.i = pOp->p3; /* P3 */ - pMem++; + pMem->flags = MEM_Int; + pMem->u.i = pOp->p2; /* P2 */ + pMem++; - if( sqlite3VdbeMemClearAndResize(pMem, 100) ){ /* P4 */ - assert( p->db->mallocFailed ); - return SQLITE_ERROR; - } - pMem->flags = MEM_Str|MEM_Term; - zP4 = displayP4(pOp, pMem->z, pMem->szMalloc); - if( zP4!=pMem->z ){ - pMem->n = 0; - sqlite3VdbeMemSetStr(pMem, zP4, -1, SQLITE_UTF8, 0); - }else{ - assert( pMem->z!=0 ); - pMem->n = sqlite3Strlen30(pMem->z); - pMem->enc = SQLITE_UTF8; - } - pMem++; + pMem->flags = MEM_Int; + pMem->u.i = pOp->p3; /* P3 */ + pMem++; - if( p->explain==1 ){ - if( sqlite3VdbeMemClearAndResize(pMem, 4) ){ + if( sqlite3VdbeMemClearAndResize(pMem, 100) ){ /* P4 */ assert( p->db->mallocFailed ); return SQLITE_ERROR; } pMem->flags = MEM_Str|MEM_Term; - pMem->n = 2; - sqlite3_snprintf(3, pMem->z, "%.2x", pOp->p5); /* P5 */ - pMem->enc = SQLITE_UTF8; + zP4 = displayP4(pOp, pMem->z, pMem->szMalloc); + if( zP4!=pMem->z ){ + pMem->n = 0; + sqlite3VdbeMemSetStr(pMem, zP4, -1, SQLITE_UTF8, 0); + }else{ + assert( pMem->z!=0 ); + pMem->n = sqlite3Strlen30(pMem->z); + pMem->enc = SQLITE_UTF8; + } pMem++; - + + if( p->explain==1 ){ + if( sqlite3VdbeMemClearAndResize(pMem, 4) ){ + assert( p->db->mallocFailed ); + return SQLITE_ERROR; + } + pMem->flags = MEM_Str|MEM_Term; + pMem->n = 2; + sqlite3_snprintf(3, pMem->z, "%.2x", pOp->p5); /* P5 */ + pMem->enc = SQLITE_UTF8; + pMem++; + #ifdef SQLITE_ENABLE_EXPLAIN_COMMENTS - if( sqlite3VdbeMemClearAndResize(pMem, 500) ){ - assert( p->db->mallocFailed ); - return SQLITE_ERROR; - } - pMem->flags = MEM_Str|MEM_Term; - pMem->n = displayComment(pOp, zP4, pMem->z, 500); - pMem->enc = SQLITE_UTF8; + if( sqlite3VdbeMemClearAndResize(pMem, 500) ){ + assert( p->db->mallocFailed ); + return SQLITE_ERROR; + } + pMem->flags = MEM_Str|MEM_Term; + pMem->n = displayComment(pOp, zP4, pMem->z, 500); + pMem->enc = SQLITE_UTF8; #else - pMem->flags = MEM_Null; /* Comment */ + pMem->flags = MEM_Null; /* Comment */ #endif - } + } - p->nResColumn = 8 - 4*(p->explain-1); - p->pResultSet = &p->aMem[1]; - p->rc = SQLITE_OK; - rc = SQLITE_ROW; + p->nResColumn = 8 - 4*(p->explain-1); + p->pResultSet = &p->aMem[1]; + p->rc = SQLITE_OK; + rc = SQLITE_ROW; + } } return rc; } @@ -73174,8 +77007,8 @@ SQLITE_PRIVATE void sqlite3VdbeFreeCursor(Vdbe *p, VdbeCursor *pCx){ break; } case CURTYPE_BTREE: { - if( pCx->pBtx ){ - sqlite3BtreeClose(pCx->pBtx); + if( pCx->isEphemeral ){ + if( pCx->pBtx ) sqlite3BtreeClose(pCx->pBtx); /* The pCx->pCursor will be close automatically, if it exists, by ** the call above. */ }else{ @@ -73272,44 +77105,24 @@ static void closeAllCursors(Vdbe *p){ } /* -** Clean up the VM after a single run. -*/ -static void Cleanup(Vdbe *p){ - sqlite3 *db = p->db; - -#ifdef SQLITE_DEBUG - /* Execute assert() statements to ensure that the Vdbe.apCsr[] and - ** Vdbe.aMem[] arrays have already been cleaned up. */ - int i; - if( p->apCsr ) for(i=0; i<p->nCursor; i++) assert( p->apCsr[i]==0 ); - if( p->aMem ){ - for(i=0; i<p->nMem; i++) assert( p->aMem[i].flags==MEM_Undefined ); - } -#endif - - sqlite3DbFree(db, p->zErrMsg); - p->zErrMsg = 0; - p->pResultSet = 0; -} - -/* ** Set the number of result columns that will be returned by this SQL ** statement. This is now set at compile time, rather than during ** execution of the vdbe program so that sqlite3_column_count() can ** be called on an SQL statement before sqlite3_step(). */ SQLITE_PRIVATE void sqlite3VdbeSetNumCols(Vdbe *p, int nResColumn){ - Mem *pColName; int n; sqlite3 *db = p->db; - releaseMemArray(p->aColName, p->nResColumn*COLNAME_N); - sqlite3DbFree(db, p->aColName); + if( p->nResColumn ){ + releaseMemArray(p->aColName, p->nResColumn*COLNAME_N); + sqlite3DbFree(db, p->aColName); + } n = nResColumn*COLNAME_N; p->nResColumn = (u16)nResColumn; - p->aColName = pColName = (Mem*)sqlite3DbMallocRawNN(db, sizeof(Mem)*n ); + p->aColName = (Mem*)sqlite3DbMallocRawNN(db, sizeof(Mem)*n ); if( p->aColName==0 ) return; - initMemArray(p->aColName, n, p->db, MEM_Null); + initMemArray(p->aColName, n, db, MEM_Null); } /* @@ -73399,6 +77212,7 @@ static int vdbeCommit(sqlite3 *db, Vdbe *p){ pPager = sqlite3BtreePager(pBt); if( db->aDb[i].safety_level!=PAGER_SYNCHRONOUS_OFF && aMJNeeded[sqlite3PagerGetJournalMode(pPager)] + && sqlite3PagerIsMemdb(pPager)==0 ){ assert( i!=1 ); nTrans++; @@ -73756,13 +77570,13 @@ SQLITE_PRIVATE int sqlite3VdbeHalt(Vdbe *p){ ** one, or the complete transaction if there is no statement transaction. */ + if( p->magic!=VDBE_MAGIC_RUN ){ + return SQLITE_OK; + } if( db->mallocFailed ){ p->rc = SQLITE_NOMEM_BKPT; } closeAllCursors(p); - if( p->magic!=VDBE_MAGIC_RUN ){ - return SQLITE_OK; - } checkActiveVdbeCnt(db); /* No commit or rollback needed if the program never started or if the @@ -73959,10 +77773,10 @@ SQLITE_PRIVATE int sqlite3VdbeTransferError(Vdbe *p){ sqlite3ValueSetStr(db->pErr, -1, p->zErrMsg, SQLITE_UTF8, SQLITE_TRANSIENT); sqlite3EndBenignMalloc(); db->bBenignMalloc--; - db->errCode = rc; - }else{ - sqlite3Error(db, rc); + }else if( db->pErr ){ + sqlite3ValueSetNull(db->pErr); } + db->errCode = rc; return rc; } @@ -73999,6 +77813,10 @@ static void vdbeInvokeSqllog(Vdbe *v){ ** VDBE_MAGIC_INIT. */ SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe *p){ +#if defined(SQLITE_DEBUG) || defined(VDBE_PROFILE) + int i; +#endif + sqlite3 *db; db = p->db; @@ -74016,8 +77834,6 @@ SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe *p){ if( p->pc>=0 ){ vdbeInvokeSqllog(p); sqlite3VdbeTransferError(p); - sqlite3DbFree(db, p->zErrMsg); - p->zErrMsg = 0; if( p->runOnlyOnce ) p->expired = 1; }else if( p->rc && p->expired ){ /* The expired flag was set on the VDBE before the first call @@ -74025,13 +77841,24 @@ SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe *p){ ** called), set the database error in this case as well. */ sqlite3ErrorWithMsg(db, p->rc, p->zErrMsg ? "%s" : 0, p->zErrMsg); - sqlite3DbFree(db, p->zErrMsg); - p->zErrMsg = 0; } - /* Reclaim all memory used by the VDBE + /* Reset register contents and reclaim error message memory. */ - Cleanup(p); +#ifdef SQLITE_DEBUG + /* Execute assert() statements to ensure that the Vdbe.apCsr[] and + ** Vdbe.aMem[] arrays have already been cleaned up. */ + if( p->apCsr ) for(i=0; i<p->nCursor; i++) assert( p->apCsr[i]==0 ); + if( p->aMem ){ + for(i=0; i<p->nMem; i++) assert( p->aMem[i].flags==MEM_Undefined ); + } +#endif + sqlite3DbFree(db, p->zErrMsg); + p->zErrMsg = 0; + p->pResultSet = 0; +#ifdef SQLITE_DEBUG + p->nWrite = 0; +#endif /* Save profiling information from this VDBE run. */ @@ -74039,7 +77866,6 @@ SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe *p){ { FILE *out = fopen("vdbe_profile.out", "a"); if( out ){ - int i; fprintf(out, "---- "); for(i=0; i<p->nOp; i++){ fprintf(out, "%02x", p->aOp[i].opcode); @@ -74069,7 +77895,6 @@ SQLITE_PRIVATE int sqlite3VdbeReset(Vdbe *p){ } } #endif - p->iCurrentTime = 0; p->magic = VDBE_MAGIC_RESET; return p->rc & db->errMask; } @@ -74108,16 +77933,18 @@ SQLITE_PRIVATE void sqlite3VdbeDeleteAuxData(sqlite3 *db, AuxData **pp, int iOp, while( *pp ){ AuxData *pAux = *pp; if( (iOp<0) - || (pAux->iOp==iOp && (pAux->iArg>31 || !(mask & MASKBIT32(pAux->iArg)))) + || (pAux->iAuxOp==iOp + && pAux->iAuxArg>=0 + && (pAux->iAuxArg>31 || !(mask & MASKBIT32(pAux->iAuxArg)))) ){ - testcase( pAux->iArg==31 ); - if( pAux->xDelete ){ - pAux->xDelete(pAux->pAux); + testcase( pAux->iAuxArg==31 ); + if( pAux->xDeleteAux ){ + pAux->xDeleteAux(pAux->pAux); } - *pp = pAux->pNext; + *pp = pAux->pNextAux; sqlite3DbFree(db, pAux); }else{ - pp= &pAux->pNext; + pp= &pAux->pNextAux; } } } @@ -74164,7 +77991,7 @@ SQLITE_PRIVATE void sqlite3VdbeClearObject(sqlite3 *db, Vdbe *p){ SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe *p){ sqlite3 *db; - if( NEVER(p==0) ) return; + assert( p!=0 ); db = p->db; assert( sqlite3_mutex_held(db->mutex) ); sqlite3VdbeClearObject(db, p); @@ -74179,7 +78006,7 @@ SQLITE_PRIVATE void sqlite3VdbeDelete(Vdbe *p){ } p->magic = VDBE_MAGIC_DEAD; p->db = 0; - sqlite3DbFree(db, p); + sqlite3DbFreeNN(db, p); } /* @@ -74251,19 +78078,18 @@ SQLITE_PRIVATE int sqlite3VdbeCursorRestore(VdbeCursor *p){ */ SQLITE_PRIVATE int sqlite3VdbeCursorMoveto(VdbeCursor **pp, int *piCol){ VdbeCursor *p = *pp; - if( p->eCurType==CURTYPE_BTREE ){ - if( p->deferredMoveto ){ - int iMap; - if( p->aAltMap && (iMap = p->aAltMap[1+*piCol])>0 ){ - *pp = p->pAltCursor; - *piCol = iMap - 1; - return SQLITE_OK; - } - return handleDeferredMoveto(p); - } - if( sqlite3BtreeCursorHasMoved(p->uc.pCursor) ){ - return handleMovedCursor(p); + assert( p->eCurType==CURTYPE_BTREE || p->eCurType==CURTYPE_PSEUDO ); + if( p->deferredMoveto ){ + int iMap; + if( p->aAltMap && (iMap = p->aAltMap[1+*piCol])>0 ){ + *pp = p->pAltCursor; + *piCol = iMap - 1; + return SQLITE_OK; } + return handleDeferredMoveto(p); + } + if( sqlite3BtreeCursorHasMoved(p->uc.pCursor) ){ + return handleMovedCursor(p); } return SQLITE_OK; } @@ -74561,7 +78387,13 @@ SQLITE_PRIVATE u32 sqlite3VdbeSerialGet( Mem *pMem /* Memory cell to write value into */ ){ switch( serial_type ){ - case 10: /* Reserved for future use */ + case 10: { /* Internal use only: NULL with virtual table + ** UPDATE no-change flag set */ + pMem->flags = MEM_Null|MEM_Zero; + pMem->n = 0; + pMem->u.nZero = 0; + break; + } case 11: /* Reserved for future use */ case 0: { /* Null */ /* EVIDENCE-OF: R-24078-09375 Value is a NULL. */ @@ -74659,13 +78491,13 @@ SQLITE_PRIVATE UnpackedRecord *sqlite3VdbeAllocUnpackedRecord( ){ UnpackedRecord *p; /* Unpacked record to return */ int nByte; /* Number of bytes required for *p */ - nByte = ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*(pKeyInfo->nField+1); + nByte = ROUND8(sizeof(UnpackedRecord)) + sizeof(Mem)*(pKeyInfo->nKeyField+1); p = (UnpackedRecord *)sqlite3DbMallocRaw(pKeyInfo->db, nByte); if( !p ) return 0; p->aMem = (Mem*)&((char*)p)[ROUND8(sizeof(UnpackedRecord))]; assert( pKeyInfo->aSortOrder!=0 ); p->pKeyInfo = pKeyInfo; - p->nField = pKeyInfo->nField + 1; + p->nField = pKeyInfo->nKeyField + 1; return p; } @@ -74705,11 +78537,11 @@ SQLITE_PRIVATE void sqlite3VdbeRecordUnpack( pMem++; if( (++u)>=p->nField ) break; } - assert( u<=pKeyInfo->nField + 1 ); + assert( u<=pKeyInfo->nKeyField + 1 ); p->nField = u; } -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG /* ** This function compares two index or table record keys in the same way ** as the sqlite3VdbeRecordCompare() routine. Unlike VdbeRecordCompare(), @@ -74754,9 +78586,9 @@ static int vdbeRecordCompareDebug( idx1 = getVarint32(aKey1, szHdr1); if( szHdr1>98307 ) return SQLITE_CORRUPT; d1 = szHdr1; - assert( pKeyInfo->nField+pKeyInfo->nXField>=pPKey2->nField || CORRUPT_DB ); + assert( pKeyInfo->nAllField>=pPKey2->nField || CORRUPT_DB ); assert( pKeyInfo->aSortOrder!=0 ); - assert( pKeyInfo->nField>0 ); + assert( pKeyInfo->nKeyField>0 ); assert( idx1<=szHdr1 || CORRUPT_DB ); do{ u32 serial_type1; @@ -74814,16 +78646,16 @@ debugCompareEnd: } #endif -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG /* ** Count the number of fields (a.k.a. columns) in the record given by ** pKey,nKey. The verify that this count is less than or equal to the -** limit given by pKeyInfo->nField + pKeyInfo->nXField. +** limit given by pKeyInfo->nAllField. ** ** If this constraint is not satisfied, it means that the high-speed ** vdbeRecordCompareInt() and vdbeRecordCompareString() routines will ** not work correctly. If this assert() ever fires, it probably means -** that the KeyInfo.nField or KeyInfo.nXField values were computed +** that the KeyInfo.nKeyField or KeyInfo.nAllField values were computed ** incorrectly. */ static void vdbeAssertFieldCountWithinLimits( @@ -74844,7 +78676,7 @@ static void vdbeAssertFieldCountWithinLimits( idx += getVarint32(aKey+idx, notUsed); nField++; } - assert( nField <= pKeyInfo->nField+pKeyInfo->nXField ); + assert( nField <= pKeyInfo->nAllField ); } #else # define vdbeAssertFieldCountWithinLimits(A,B,C) @@ -74869,7 +78701,6 @@ static int vdbeCompareMemString( }else{ int rc; const void *v1, *v2; - int n1, n2; Mem c1; Mem c2; sqlite3VdbeMemInit(&c1, pMem1->db, MEM_Null); @@ -74877,11 +78708,13 @@ static int vdbeCompareMemString( sqlite3VdbeMemShallowCopy(&c1, pMem1, MEM_Ephem); sqlite3VdbeMemShallowCopy(&c2, pMem2, MEM_Ephem); v1 = sqlite3ValueText((sqlite3_value*)&c1, pColl->enc); - n1 = v1==0 ? 0 : c1.n; v2 = sqlite3ValueText((sqlite3_value*)&c2, pColl->enc); - n2 = v2==0 ? 0 : c2.n; - rc = pColl->xCmp(pColl->pUser, n1, v1, n2, v2); - if( (v1==0 || v2==0) && prcErr ) *prcErr = SQLITE_NOMEM_BKPT; + if( (v1==0 || v2==0) ){ + if( prcErr ) *prcErr = SQLITE_NOMEM_BKPT; + rc = 0; + }else{ + rc = pColl->xCmp(pColl->pUser, c1.n, v1, c2.n, v2); + } sqlite3VdbeMemRelease(&c1); sqlite3VdbeMemRelease(&c2); return rc; @@ -74948,13 +78781,10 @@ static int sqlite3IntFloatCompare(i64 i, double r){ i64 y; double s; if( r<-9223372036854775808.0 ) return +1; - if( r>9223372036854775807.0 ) return -1; + if( r>=9223372036854775808.0 ) return -1; y = (i64)r; if( i<y ) return -1; - if( i>y ){ - if( y==SMALLEST_INT64 && r>0.0 ) return -1; - return +1; - } + if( i>y ) return +1; s = (double)i; if( s<r ) return -1; if( s>r ) return +1; @@ -75148,10 +78978,10 @@ SQLITE_PRIVATE int sqlite3VdbeRecordCompareWithSkip( } VVA_ONLY( mem1.szMalloc = 0; ) /* Only needed by assert() statements */ - assert( pPKey2->pKeyInfo->nField+pPKey2->pKeyInfo->nXField>=pPKey2->nField + assert( pPKey2->pKeyInfo->nAllField>=pPKey2->nField || CORRUPT_DB ); assert( pPKey2->pKeyInfo->aSortOrder!=0 ); - assert( pPKey2->pKeyInfo->nField>0 ); + assert( pPKey2->pKeyInfo->nKeyField>0 ); assert( idx1<=szHdr1 || CORRUPT_DB ); do{ u32 serial_type; @@ -75484,7 +79314,7 @@ SQLITE_PRIVATE RecordCompare sqlite3VdbeFindCompare(UnpackedRecord *p){ ** The easiest way to enforce this limit is to consider only records with ** 13 fields or less. If the first field is an integer, the maximum legal ** header size is (12*5 + 1 + 1) bytes. */ - if( (p->pKeyInfo->nField + p->pKeyInfo->nXField)<=13 ){ + if( p->pKeyInfo->nAllField<=13 ){ int flags = p->aMem[0].flags; if( p->pKeyInfo->aSortOrder[0] ){ p->r1 = 1; @@ -75667,6 +79497,13 @@ SQLITE_PRIVATE sqlite3 *sqlite3VdbeDb(Vdbe *v){ } /* +** Return the SQLITE_PREPARE flags for a Vdbe. +*/ +SQLITE_PRIVATE u8 sqlite3VdbePrepareFlags(Vdbe *v){ + return v->prepFlags; +} + +/* ** Return a pointer to an sqlite3_value structure containing the value bound ** parameter iVar of VM v. Except, if the value is an SQL NULL, return ** 0 instead. Unless it is NULL, apply affinity aff (one of the SQLITE_AFF_* @@ -75678,6 +79515,7 @@ SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetBoundValue(Vdbe *v, int iVar, u8 aff assert( iVar>0 ); if( v ){ Mem *pMem = &v->aVar[iVar-1]; + assert( (v->db->flags & SQLITE_EnableQPSG)==0 ); if( 0==(pMem->flags & MEM_Null) ){ sqlite3_value *pRet = sqlite3ValueNew(v->db); if( pRet ){ @@ -75697,13 +79535,36 @@ SQLITE_PRIVATE sqlite3_value *sqlite3VdbeGetBoundValue(Vdbe *v, int iVar, u8 aff */ SQLITE_PRIVATE void sqlite3VdbeSetVarmask(Vdbe *v, int iVar){ assert( iVar>0 ); - if( iVar>32 ){ - v->expmask = 0xffffffff; + assert( (v->db->flags & SQLITE_EnableQPSG)==0 ); + if( iVar>=32 ){ + v->expmask |= 0x80000000; }else{ v->expmask |= ((u32)1 << (iVar-1)); } } +/* +** Cause a function to throw an error if it was call from OP_PureFunc +** rather than OP_Function. +** +** OP_PureFunc means that the function must be deterministic, and should +** throw an error if it is given inputs that would make it non-deterministic. +** This routine is invoked by date/time functions that use non-deterministic +** features such as 'now'. +*/ +SQLITE_PRIVATE int sqlite3NotPureFunc(sqlite3_context *pCtx){ +#ifdef SQLITE_ENABLE_STAT3_OR_STAT4 + if( pCtx->pVdbe==0 ) return 1; +#endif + if( pCtx->pVdbe->aOp[pCtx->iOp].opcode==OP_PureFunc ){ + sqlite3_result_error(pCtx, + "non-deterministic function in index expression or CHECK constraint", + -1); + return 0; + } + return 1; +} + #ifndef SQLITE_OMIT_VIRTUALTABLE /* ** Transfer error message text from an sqlite3_vtab.zErrMsg (text stored @@ -75738,7 +79599,7 @@ static void vdbeFreeUnpacked(sqlite3 *db, int nField, UnpackedRecord *p){ Mem *pMem = &p->aMem[i]; if( pMem->zMalloc ) sqlite3VdbeMemRelease(pMem); } - sqlite3DbFree(db, p); + sqlite3DbFreeNN(db, p); } } #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ @@ -75788,7 +79649,7 @@ SQLITE_PRIVATE void sqlite3VdbePreUpdateHook( preupdate.iNewReg = iReg; preupdate.keyinfo.db = db; preupdate.keyinfo.enc = ENC(db); - preupdate.keyinfo.nField = pTab->nCol; + preupdate.keyinfo.nKeyField = pTab->nCol; preupdate.keyinfo.aSortOrder = (u8*)&fakeSortOrder; preupdate.iKey1 = iKey1; preupdate.iKey2 = iKey2; @@ -75798,14 +79659,14 @@ SQLITE_PRIVATE void sqlite3VdbePreUpdateHook( db->xPreUpdateCallback(db->pPreUpdateArg, db, op, zDb, zTbl, iKey1, iKey2); db->pPreUpdate = 0; sqlite3DbFree(db, preupdate.aRecord); - vdbeFreeUnpacked(db, preupdate.keyinfo.nField+1, preupdate.pUnpacked); - vdbeFreeUnpacked(db, preupdate.keyinfo.nField+1, preupdate.pNewUnpacked); + vdbeFreeUnpacked(db, preupdate.keyinfo.nKeyField+1, preupdate.pUnpacked); + vdbeFreeUnpacked(db, preupdate.keyinfo.nKeyField+1, preupdate.pNewUnpacked); if( preupdate.aNew ){ int i; for(i=0; i<pCsr->nField; i++){ sqlite3VdbeMemRelease(&preupdate.aNew[i]); } - sqlite3DbFree(db, preupdate.aNew); + sqlite3DbFreeNN(db, preupdate.aNew); } } #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ @@ -75968,7 +79829,8 @@ SQLITE_API int sqlite3_clear_bindings(sqlite3_stmt *pStmt){ sqlite3VdbeMemRelease(&p->aVar[i]); p->aVar[i].flags = MEM_Null; } - if( p->isPrepareV2 && p->expmask ){ + assert( (p->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || p->expmask==0 ); + if( p->expmask ){ p->expired = 1; } sqlite3_mutex_leave(mutex); @@ -76012,6 +79874,19 @@ SQLITE_API unsigned int sqlite3_value_subtype(sqlite3_value *pVal){ Mem *pMem = (Mem*)pVal; return ((pMem->flags & MEM_Subtype) ? pMem->eSubtype : 0); } +SQLITE_API void *sqlite3_value_pointer(sqlite3_value *pVal, const char *zPType){ + Mem *p = (Mem*)pVal; + if( (p->flags&(MEM_TypeMask|MEM_Term|MEM_Subtype)) == + (MEM_Null|MEM_Term|MEM_Subtype) + && zPType!=0 + && p->eSubtype=='p' + && strcmp(p->u.zPType, zPType)==0 + ){ + return (void*)p->z; + }else{ + return 0; + } +} SQLITE_API const unsigned char *sqlite3_value_text(sqlite3_value *pVal){ return (const unsigned char *)sqlite3ValueText(pVal, SQLITE_UTF8); } @@ -76068,6 +79943,11 @@ SQLITE_API int sqlite3_value_type(sqlite3_value* pVal){ return aType[pVal->flags&MEM_AffMask]; } +/* Return true if a parameter to xUpdate represents an unchanged column */ +SQLITE_API int sqlite3_value_nochange(sqlite3_value *pVal){ + return (pVal->flags&(MEM_Null|MEM_Zero))==(MEM_Null|MEM_Zero); +} + /* Make a copy of an sqlite3_value object */ SQLITE_API sqlite3_value *sqlite3_value_dup(const sqlite3_value *pOrig){ @@ -76167,14 +80047,12 @@ SQLITE_API void sqlite3_result_double(sqlite3_context *pCtx, double rVal){ SQLITE_API void sqlite3_result_error(sqlite3_context *pCtx, const char *z, int n){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_ERROR; - pCtx->fErrorOrAux = 1; sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF8, SQLITE_TRANSIENT); } #ifndef SQLITE_OMIT_UTF16 SQLITE_API void sqlite3_result_error16(sqlite3_context *pCtx, const void *z, int n){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_ERROR; - pCtx->fErrorOrAux = 1; sqlite3VdbeMemSetStr(pCtx->pOut, z, n, SQLITE_UTF16NATIVE, SQLITE_TRANSIENT); } #endif @@ -76190,6 +80068,18 @@ SQLITE_API void sqlite3_result_null(sqlite3_context *pCtx){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); sqlite3VdbeMemSetNull(pCtx->pOut); } +SQLITE_API void sqlite3_result_pointer( + sqlite3_context *pCtx, + void *pPtr, + const char *zPType, + void (*xDestructor)(void*) +){ + Mem *pOut = pCtx->pOut; + assert( sqlite3_mutex_held(pOut->db->mutex) ); + sqlite3VdbeMemRelease(pOut); + pOut->flags = MEM_Null; + sqlite3VdbeMemSetPointer(pOut, pPtr, zPType, xDestructor); +} SQLITE_API void sqlite3_result_subtype(sqlite3_context *pCtx, unsigned int eSubtype){ Mem *pOut = pCtx->pOut; assert( sqlite3_mutex_held(pOut->db->mutex) ); @@ -76268,8 +80158,7 @@ SQLITE_API int sqlite3_result_zeroblob64(sqlite3_context *pCtx, u64 n){ return SQLITE_OK; } SQLITE_API void sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){ - pCtx->isError = errCode; - pCtx->fErrorOrAux = 1; + pCtx->isError = errCode ? errCode : -1; #ifdef SQLITE_DEBUG if( pCtx->pVdbe ) pCtx->pVdbe->rcApp = errCode; #endif @@ -76283,7 +80172,6 @@ SQLITE_API void sqlite3_result_error_code(sqlite3_context *pCtx, int errCode){ SQLITE_API void sqlite3_result_error_toobig(sqlite3_context *pCtx){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); pCtx->isError = SQLITE_TOOBIG; - pCtx->fErrorOrAux = 1; sqlite3VdbeMemSetStr(pCtx->pOut, "string or blob too big", -1, SQLITE_UTF8, SQLITE_STATIC); } @@ -76293,7 +80181,6 @@ SQLITE_API void sqlite3_result_error_nomem(sqlite3_context *pCtx){ assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); sqlite3VdbeMemSetNull(pCtx->pOut); pCtx->isError = SQLITE_NOMEM_BKPT; - pCtx->fErrorOrAux = 1; sqlite3OomFault(pCtx->pOut->db); } @@ -76312,7 +80199,7 @@ static int doWalCallbacks(sqlite3 *db){ sqlite3BtreeEnter(pBt); nEntry = sqlite3PagerWalCallback(sqlite3BtreePager(pBt)); sqlite3BtreeLeave(pBt); - if( db->xWalCallback && nEntry>0 && rc==SQLITE_OK ){ + if( nEntry>0 && db->xWalCallback && rc==SQLITE_OK ){ rc = db->xWalCallback(db->pWalArg, db, db->aDb[i].zDbSName, nEntry); } } @@ -76422,7 +80309,7 @@ static int sqlite3Step(Vdbe *p){ if( rc!=SQLITE_ROW ) checkProfileCallback(db, p); #endif - if( rc==SQLITE_DONE ){ + if( rc==SQLITE_DONE && db->autoCommit ){ assert( p->rc==SQLITE_OK ); p->rc = doWalCallbacks(db); if( p->rc!=SQLITE_OK ){ @@ -76446,8 +80333,11 @@ end_of_step: || (rc&0xff)==SQLITE_BUSY || rc==SQLITE_MISUSE ); assert( (p->rc!=SQLITE_ROW && p->rc!=SQLITE_DONE) || p->rc==p->rcApp ); - if( p->isPrepareV2 && rc!=SQLITE_ROW && rc!=SQLITE_DONE ){ - /* If this statement was prepared using sqlite3_prepare_v2(), and an + if( (p->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 + && rc!=SQLITE_ROW + && rc!=SQLITE_DONE + ){ + /* If this statement was prepared using saved SQL and an ** error has occurred, then return the error code in p->rc to the ** caller. Set the error code in the database handle to the same value. */ @@ -76463,7 +80353,6 @@ end_of_step: */ SQLITE_API int sqlite3_step(sqlite3_stmt *pStmt){ int rc = SQLITE_OK; /* Result from sqlite3Step() */ - int rc2 = SQLITE_OK; /* Result from sqlite3Reprepare() */ Vdbe *v = (Vdbe*)pStmt; /* the prepared statement */ int cnt = 0; /* Counter to prevent infinite loop of reprepares */ sqlite3 *db; /* The database connection */ @@ -76477,32 +80366,31 @@ SQLITE_API int sqlite3_step(sqlite3_stmt *pStmt){ while( (rc = sqlite3Step(v))==SQLITE_SCHEMA && cnt++ < SQLITE_MAX_SCHEMA_RETRY ){ int savedPc = v->pc; - rc2 = rc = sqlite3Reprepare(v); - if( rc!=SQLITE_OK) break; + rc = sqlite3Reprepare(v); + if( rc!=SQLITE_OK ){ + /* This case occurs after failing to recompile an sql statement. + ** The error message from the SQL compiler has already been loaded + ** into the database handle. This block copies the error message + ** from the database handle into the statement and sets the statement + ** program counter to 0 to ensure that when the statement is + ** finalized or reset the parser error message is available via + ** sqlite3_errmsg() and sqlite3_errcode(). + */ + const char *zErr = (const char *)sqlite3_value_text(db->pErr); + sqlite3DbFree(db, v->zErrMsg); + if( !db->mallocFailed ){ + v->zErrMsg = sqlite3DbStrDup(db, zErr); + v->rc = rc = sqlite3ApiExit(db, rc); + } else { + v->zErrMsg = 0; + v->rc = rc = SQLITE_NOMEM_BKPT; + } + break; + } sqlite3_reset(pStmt); if( savedPc>=0 ) v->doingRerun = 1; assert( v->expired==0 ); } - if( rc2!=SQLITE_OK ){ - /* This case occurs after failing to recompile an sql statement. - ** The error message from the SQL compiler has already been loaded - ** into the database handle. This block copies the error message - ** from the database handle into the statement and sets the statement - ** program counter to 0 to ensure that when the statement is - ** finalized or reset the parser error message is available via - ** sqlite3_errmsg() and sqlite3_errcode(). - */ - const char *zErr = (const char *)sqlite3_value_text(db->pErr); - sqlite3DbFree(db, v->zErrMsg); - if( !db->mallocFailed ){ - v->zErrMsg = sqlite3DbStrDup(db, zErr); - v->rc = rc2; - } else { - v->zErrMsg = 0; - v->rc = rc = SQLITE_NOMEM_BKPT; - } - } - rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); return rc; } @@ -76533,6 +80421,25 @@ SQLITE_API sqlite3 *sqlite3_context_db_handle(sqlite3_context *p){ } /* +** If this routine is invoked from within an xColumn method of a virtual +** table, then it returns true if and only if the the call is during an +** UPDATE operation and the value of the column will not be modified +** by the UPDATE. +** +** If this routine is called from any context other than within the +** xColumn method of a virtual table, then the return value is meaningless +** and arbitrary. +** +** Virtual table implements might use this routine to optimize their +** performance by substituting a NULL result, or some other light-weight +** value, as a signal to the xUpdate routine that the column is unchanged. +*/ +SQLITE_API int sqlite3_vtab_nochange(sqlite3_context *p){ + assert( p ); + return sqlite3_value_nochange(p->pOut); +} + +/* ** Return the current time for a statement. If the current time ** is requested more than once within the same run of a single prepared ** statement, the exact same time is returned for each invocation regardless @@ -76556,28 +80463,6 @@ SQLITE_PRIVATE sqlite3_int64 sqlite3StmtCurrentTime(sqlite3_context *p){ } /* -** The following is the implementation of an SQL function that always -** fails with an error message stating that the function is used in the -** wrong context. The sqlite3_overload_function() API might construct -** SQL function that use this routine so that the functions will exist -** for name resolution but are actually overloaded by the xFindFunction -** method of virtual tables. -*/ -SQLITE_PRIVATE void sqlite3InvalidFunction( - sqlite3_context *context, /* The function calling context */ - int NotUsed, /* Number of arguments to the function */ - sqlite3_value **NotUsed2 /* Value of each argument */ -){ - const char *zName = context->pFunc->zName; - char *zErr; - UNUSED_PARAMETER2(NotUsed, NotUsed2); - zErr = sqlite3_mprintf( - "unable to use function %s in the requested context", zName); - sqlite3_result_error(context, zErr, -1); - sqlite3_free(zErr); -} - -/* ** Create a new aggregate context for p and return a pointer to ** its pMem->z element. */ @@ -76617,6 +80502,12 @@ SQLITE_API void *sqlite3_aggregate_context(sqlite3_context *p, int nByte){ /* ** Return the auxiliary data pointer, if any, for the iArg'th argument to ** the user-function defined by pCtx. +** +** The left-most argument is 0. +** +** Undocumented behavior: If iArg is negative then access a cache of +** auxiliary data pointers that is available to all functions within a +** single prepared statement. The iArg values must match. */ SQLITE_API void *sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){ AuxData *pAuxData; @@ -76627,17 +80518,24 @@ SQLITE_API void *sqlite3_get_auxdata(sqlite3_context *pCtx, int iArg){ #else assert( pCtx->pVdbe!=0 ); #endif - for(pAuxData=pCtx->pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNext){ - if( pAuxData->iOp==pCtx->iOp && pAuxData->iArg==iArg ) break; + for(pAuxData=pCtx->pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNextAux){ + if( pAuxData->iAuxArg==iArg && (pAuxData->iAuxOp==pCtx->iOp || iArg<0) ){ + return pAuxData->pAux; + } } - - return (pAuxData ? pAuxData->pAux : 0); + return 0; } /* ** Set the auxiliary data pointer and delete function, for the iArg'th ** argument to the user-function defined by pCtx. Any previous value is ** deleted by calling the delete function specified when it was set. +** +** The left-most argument is 0. +** +** Undocumented behavior: If iArg is negative then make the data available +** to all functions within the current prepared statement using iArg as an +** access code. */ SQLITE_API void sqlite3_set_auxdata( sqlite3_context *pCtx, @@ -76649,33 +80547,31 @@ SQLITE_API void sqlite3_set_auxdata( Vdbe *pVdbe = pCtx->pVdbe; assert( sqlite3_mutex_held(pCtx->pOut->db->mutex) ); - if( iArg<0 ) goto failed; #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 if( pVdbe==0 ) goto failed; #else assert( pVdbe!=0 ); #endif - for(pAuxData=pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNext){ - if( pAuxData->iOp==pCtx->iOp && pAuxData->iArg==iArg ) break; + for(pAuxData=pVdbe->pAuxData; pAuxData; pAuxData=pAuxData->pNextAux){ + if( pAuxData->iAuxArg==iArg && (pAuxData->iAuxOp==pCtx->iOp || iArg<0) ){ + break; + } } if( pAuxData==0 ){ pAuxData = sqlite3DbMallocZero(pVdbe->db, sizeof(AuxData)); if( !pAuxData ) goto failed; - pAuxData->iOp = pCtx->iOp; - pAuxData->iArg = iArg; - pAuxData->pNext = pVdbe->pAuxData; + pAuxData->iAuxOp = pCtx->iOp; + pAuxData->iAuxArg = iArg; + pAuxData->pNextAux = pVdbe->pAuxData; pVdbe->pAuxData = pAuxData; - if( pCtx->fErrorOrAux==0 ){ - pCtx->isError = 0; - pCtx->fErrorOrAux = 1; - } - }else if( pAuxData->xDelete ){ - pAuxData->xDelete(pAuxData->pAux); + if( pCtx->isError==0 ) pCtx->isError = -1; + }else if( pAuxData->xDeleteAux ){ + pAuxData->xDeleteAux(pAuxData->pAux); } pAuxData->pAux = pAux; - pAuxData->xDelete = xDelete; + pAuxData->xDeleteAux = xDelete; return; failed: @@ -77072,9 +80968,8 @@ static int vdbeUnbind(Vdbe *p, int i){ ** as if there had been a schema change, on the first sqlite3_step() call ** following any change to the bindings of that parameter. */ - if( p->isPrepareV2 && - ((i<32 && p->expmask & ((u32)1 << i)) || p->expmask==0xffffffff) - ){ + assert( (p->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || p->expmask==0 ); + if( p->expmask!=0 && (p->expmask & (i>=31 ? 0x80000000 : (u32)1<<i))!=0 ){ p->expired = 1; } return SQLITE_OK; @@ -77103,8 +80998,10 @@ static int bindText( if( rc==SQLITE_OK && encoding!=0 ){ rc = sqlite3VdbeChangeEncoding(pVar, ENC(p->db)); } - sqlite3Error(p->db, rc); - rc = sqlite3ApiExit(p->db, rc); + if( rc ){ + sqlite3Error(p->db, rc); + rc = sqlite3ApiExit(p->db, rc); + } } sqlite3_mutex_leave(p->db->mutex); }else if( xDel!=SQLITE_STATIC && xDel!=SQLITE_TRANSIENT ){ @@ -77175,6 +81072,24 @@ SQLITE_API int sqlite3_bind_null(sqlite3_stmt *pStmt, int i){ } return rc; } +SQLITE_API int sqlite3_bind_pointer( + sqlite3_stmt *pStmt, + int i, + void *pPtr, + const char *zPTtype, + void (*xDestructor)(void*) +){ + int rc; + Vdbe *p = (Vdbe*)pStmt; + rc = vdbeUnbind(p, i); + if( rc==SQLITE_OK ){ + sqlite3VdbeMemSetPointer(&p->aVar[i-1], pPtr, zPTtype, xDestructor); + sqlite3_mutex_leave(p->db->mutex); + }else if( xDestructor ){ + xDestructor(pPtr); + } + return rc; +} SQLITE_API int sqlite3_bind_text( sqlite3_stmt *pStmt, int i, @@ -77337,10 +81252,12 @@ SQLITE_API int sqlite3_transfer_bindings(sqlite3_stmt *pFromStmt, sqlite3_stmt * if( pFrom->nVar!=pTo->nVar ){ return SQLITE_ERROR; } - if( pTo->isPrepareV2 && pTo->expmask ){ + assert( (pTo->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || pTo->expmask==0 ); + if( pTo->expmask ){ pTo->expired = 1; } - if( pFrom->isPrepareV2 && pFrom->expmask ){ + assert( (pFrom->prepFlags & SQLITE_PREPARE_SAVESQL)!=0 || pFrom->expmask==0 ); + if( pFrom->expmask ){ pFrom->expired = 1; } return sqlite3TransferBindings(pFromStmt, pToStmt); @@ -77404,13 +81321,26 @@ SQLITE_API int sqlite3_stmt_status(sqlite3_stmt *pStmt, int op, int resetFlag){ Vdbe *pVdbe = (Vdbe*)pStmt; u32 v; #ifdef SQLITE_ENABLE_API_ARMOR - if( !pStmt ){ + if( !pStmt + || (op!=SQLITE_STMTSTATUS_MEMUSED && (op<0||op>=ArraySize(pVdbe->aCounter))) + ){ (void)SQLITE_MISUSE_BKPT; return 0; } #endif - v = pVdbe->aCounter[op]; - if( resetFlag ) pVdbe->aCounter[op] = 0; + if( op==SQLITE_STMTSTATUS_MEMUSED ){ + sqlite3 *db = pVdbe->db; + sqlite3_mutex_enter(db->mutex); + v = 0; + db->pnBytesFreed = (int*)&v; + sqlite3VdbeClearObject(db, pVdbe); + sqlite3DbFree(db, pVdbe); + db->pnBytesFreed = 0; + sqlite3_mutex_leave(db->mutex); + }else{ + v = pVdbe->aCounter[op]; + if( resetFlag ) pVdbe->aCounter[op] = 0; + } return (int)v; } @@ -77462,7 +81392,7 @@ static UnpackedRecord *vdbeUnpackRecord( pRet = sqlite3VdbeAllocUnpackedRecord(pKeyInfo); if( pRet ){ - memset(pRet->aMem, 0, sizeof(Mem)*(pKeyInfo->nField+1)); + memset(pRet->aMem, 0, sizeof(Mem)*(pKeyInfo->nKeyField+1)); sqlite3VdbeRecordUnpack(pKeyInfo, nKey, pKey, pRet); } return pRet; @@ -77535,7 +81465,7 @@ SQLITE_API int sqlite3_preupdate_old(sqlite3 *db, int iIdx, sqlite3_value **ppVa */ SQLITE_API int sqlite3_preupdate_count(sqlite3 *db){ PreUpdate *p = db->pPreUpdate; - return (p ? p->keyinfo.nField : 0); + return (p ? p->keyinfo.nKeyField : 0); } #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ @@ -77788,7 +81718,7 @@ SQLITE_PRIVATE char *sqlite3VdbeExpandSql( Mem *pVar; /* Value of a host parameter */ StrAccum out; /* Accumulate the output here */ #ifndef SQLITE_OMIT_UTF16 - Mem utf8; /* Used to convert UTF16 parameters into UTF8 for display */ + Mem utf8; /* Used to convert UTF16 into UTF8 for display */ #endif char zBase[100]; /* Initial working space */ @@ -77799,17 +81729,17 @@ SQLITE_PRIVATE char *sqlite3VdbeExpandSql( while( *zRawSql ){ const char *zStart = zRawSql; while( *(zRawSql++)!='\n' && *zRawSql ); - sqlite3StrAccumAppend(&out, "-- ", 3); + sqlite3_str_append(&out, "-- ", 3); assert( (zRawSql - zStart) > 0 ); - sqlite3StrAccumAppend(&out, zStart, (int)(zRawSql-zStart)); + sqlite3_str_append(&out, zStart, (int)(zRawSql-zStart)); } }else if( p->nVar==0 ){ - sqlite3StrAccumAppend(&out, zRawSql, sqlite3Strlen30(zRawSql)); + sqlite3_str_append(&out, zRawSql, sqlite3Strlen30(zRawSql)); }else{ while( zRawSql[0] ){ n = findNextHostParameter(zRawSql, &nToken); assert( n>0 ); - sqlite3StrAccumAppend(&out, zRawSql, n); + sqlite3_str_append(&out, zRawSql, n); zRawSql += n; assert( zRawSql[0] || nToken==0 ); if( nToken==0 ) break; @@ -77835,11 +81765,11 @@ SQLITE_PRIVATE char *sqlite3VdbeExpandSql( assert( idx>0 && idx<=p->nVar ); pVar = &p->aVar[idx-1]; if( pVar->flags & MEM_Null ){ - sqlite3StrAccumAppend(&out, "NULL", 4); + sqlite3_str_append(&out, "NULL", 4); }else if( pVar->flags & MEM_Int ){ - sqlite3XPrintf(&out, "%lld", pVar->u.i); + sqlite3_str_appendf(&out, "%lld", pVar->u.i); }else if( pVar->flags & MEM_Real ){ - sqlite3XPrintf(&out, "%!.15g", pVar->u.r); + sqlite3_str_appendf(&out, "%!.15g", pVar->u.r); }else if( pVar->flags & MEM_Str ){ int nOut; /* Number of bytes of the string text to include in output */ #ifndef SQLITE_OMIT_UTF16 @@ -77849,7 +81779,7 @@ SQLITE_PRIVATE char *sqlite3VdbeExpandSql( utf8.db = db; sqlite3VdbeMemSetStr(&utf8, pVar->z, pVar->n, enc, SQLITE_STATIC); if( SQLITE_NOMEM==sqlite3VdbeChangeEncoding(&utf8, SQLITE_UTF8) ){ - out.accError = STRACCUM_NOMEM; + out.accError = SQLITE_NOMEM; out.nAlloc = 0; } pVar = &utf8; @@ -77862,38 +81792,38 @@ SQLITE_PRIVATE char *sqlite3VdbeExpandSql( while( nOut<pVar->n && (pVar->z[nOut]&0xc0)==0x80 ){ nOut++; } } #endif - sqlite3XPrintf(&out, "'%.*q'", nOut, pVar->z); + sqlite3_str_appendf(&out, "'%.*q'", nOut, pVar->z); #ifdef SQLITE_TRACE_SIZE_LIMIT if( nOut<pVar->n ){ - sqlite3XPrintf(&out, "/*+%d bytes*/", pVar->n-nOut); + sqlite3_str_appendf(&out, "/*+%d bytes*/", pVar->n-nOut); } #endif #ifndef SQLITE_OMIT_UTF16 if( enc!=SQLITE_UTF8 ) sqlite3VdbeMemRelease(&utf8); #endif }else if( pVar->flags & MEM_Zero ){ - sqlite3XPrintf(&out, "zeroblob(%d)", pVar->u.nZero); + sqlite3_str_appendf(&out, "zeroblob(%d)", pVar->u.nZero); }else{ int nOut; /* Number of bytes of the blob to include in output */ assert( pVar->flags & MEM_Blob ); - sqlite3StrAccumAppend(&out, "x'", 2); + sqlite3_str_append(&out, "x'", 2); nOut = pVar->n; #ifdef SQLITE_TRACE_SIZE_LIMIT if( nOut>SQLITE_TRACE_SIZE_LIMIT ) nOut = SQLITE_TRACE_SIZE_LIMIT; #endif for(i=0; i<nOut; i++){ - sqlite3XPrintf(&out, "%02x", pVar->z[i]&0xff); + sqlite3_str_appendf(&out, "%02x", pVar->z[i]&0xff); } - sqlite3StrAccumAppend(&out, "'", 1); + sqlite3_str_append(&out, "'", 1); #ifdef SQLITE_TRACE_SIZE_LIMIT if( nOut<pVar->n ){ - sqlite3XPrintf(&out, "/*+%d bytes*/", pVar->n-nOut); + sqlite3_str_appendf(&out, "/*+%d bytes*/", pVar->n-nOut); } #endif } } } - if( out.accError ) sqlite3StrAccumReset(&out); + if( out.accError ) sqlite3_str_reset(&out); return sqlite3StrAccumFinish(&out); } @@ -78167,6 +82097,11 @@ static void applyNumericAffinity(Mem *pRec, int bTryForInt){ pRec->flags |= MEM_Real; if( bTryForInt ) sqlite3VdbeIntegerAffinity(pRec); } + /* TEXT->NUMERIC is many->one. Hence, it is important to invalidate the + ** string representation after computing a numeric equivalent, because the + ** string representation might not be the canonical representation for the + ** numeric value. Ticket [343634942dd54ab57b7024] 2018-01-31. */ + pRec->flags &= ~MEM_Str; } /* @@ -78257,7 +82192,7 @@ static u16 SQLITE_NOINLINE computeNumericType(Mem *pMem){ if( sqlite3AtoF(pMem->z, &pMem->u.r, pMem->n, pMem->enc)==0 ){ return 0; } - if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==SQLITE_OK ){ + if( sqlite3Atoi64(pMem->z, &pMem->u.i, pMem->n, pMem->enc)==0 ){ return MEM_Int; } return MEM_Real; @@ -78306,9 +82241,7 @@ SQLITE_PRIVATE void sqlite3VdbeMemPrettyPrint(Mem *pMem, char *zBuf){ }else{ c = 's'; } - - sqlite3_snprintf(100, zCsr, "%c", c); - zCsr += sqlite3Strlen30(zCsr); + *(zCsr++) = c; sqlite3_snprintf(100, zCsr, "%d[", pMem->n); zCsr += sqlite3Strlen30(zCsr); for(i=0; i<16 && i<pMem->n; i++){ @@ -78320,9 +82253,7 @@ SQLITE_PRIVATE void sqlite3VdbeMemPrettyPrint(Mem *pMem, char *zBuf){ if( z<32 || z>126 ) *zCsr++ = '.'; else *zCsr++ = z; } - - sqlite3_snprintf(100, zCsr, "]%s", encnames[pMem->enc]); - zCsr += sqlite3Strlen30(zCsr); + *(zCsr++) = ']'; if( f & MEM_Zero ){ sqlite3_snprintf(100, zCsr,"+%dz",pMem->u.nZero); zCsr += sqlite3Strlen30(zCsr); @@ -78371,7 +82302,7 @@ static void memTracePrint(Mem *p){ if( p->flags & MEM_Undefined ){ printf(" undefined"); }else if( p->flags & MEM_Null ){ - printf(" NULL"); + printf(p->flags & MEM_Zero ? " NULL-nochng" : " NULL"); }else if( (p->flags & (MEM_Int|MEM_Str))==(MEM_Int|MEM_Str) ){ printf(" si:%lld", p->u.i); }else if( p->flags & MEM_Int ){ @@ -78393,6 +82324,7 @@ static void registerTrace(int iReg, Mem *p){ printf("REG[%d] = ", iReg); memTracePrint(p); printf("\n"); + sqlite3VdbeCheckMemInvariants(p); } #endif @@ -78568,7 +82500,7 @@ SQLITE_PRIVATE int sqlite3VdbeExec( int iCompare = 0; /* Result of last comparison */ unsigned nVmStep = 0; /* Number of virtual machine steps */ #ifndef SQLITE_OMIT_PROGRESS_CALLBACK - unsigned nProgressLimit = 0;/* Invoke xProgress() when nVmStep reaches this */ + unsigned nProgressLimit; /* Invoke xProgress() when nVmStep reaches this */ #endif Mem *aMem = p->aMem; /* Copy of p->aMem */ Mem *pIn1 = 0; /* 1st input operand */ @@ -78600,6 +82532,8 @@ SQLITE_PRIVATE int sqlite3VdbeExec( u32 iPrior = p->aCounter[SQLITE_STMTSTATUS_VM_STEP]; assert( 0 < db->nProgressOps ); nProgressLimit = db->nProgressOps - (iPrior % db->nProgressOps); + }else{ + nProgressLimit = 0xffffffff; } #endif #ifdef SQLITE_DEBUG @@ -78636,7 +82570,7 @@ SQLITE_PRIVATE int sqlite3VdbeExec( assert( pOp>=aOp && pOp<&aOp[p->nOp]); #ifdef VDBE_PROFILE - start = sqlite3Hwtime(); + start = sqlite3NProfileCnt ? sqlite3NProfileCnt : sqlite3Hwtime(); #endif nVmStep++; #ifdef SQLITE_ENABLE_STMT_SCANSTATUS @@ -78759,7 +82693,7 @@ jump_to_p2_and_check_for_interrupt: pOp = &aOp[pOp->p2 - 1]; /* Opcodes that are used as the bottom of a loop (OP_Next, OP_Prev, - ** OP_VNext, OP_RowSetNext, or OP_SorterNext) all jump here upon + ** OP_VNext, or OP_SorterNext) all jump here upon ** completion. Check to see if sqlite3_interrupt() has been called ** or if the progress callback needs to be invoked. ** @@ -78777,7 +82711,7 @@ check_for_interrupt: ** If the progress callback returns non-zero, exit the virtual machine with ** a return code SQLITE_ABORT. */ - if( db->xProgress!=0 && nVmStep>=nProgressLimit ){ + if( nVmStep>=nProgressLimit && db->xProgress!=0 ){ assert( db->nProgressOps!=0 ); nProgressLimit = nVmStep + db->nProgressOps - (nVmStep%db->nProgressOps); if( db->xProgress(db->pProgressArg) ){ @@ -78903,6 +82837,9 @@ case OP_Yield: { /* in1, jump */ */ case OP_HaltIfNull: { /* in3 */ pIn3 = &aMem[pOp->p3]; +#ifdef SQLITE_DEBUG + if( pOp->p2==OE_Abort ){ sqlite3VdbeAssertAbortable(p); } +#endif if( (pIn3->flags & MEM_Null)==0 ) break; /* Fall through into OP_Halt */ } @@ -78942,6 +82879,9 @@ case OP_Halt: { int pcx; pcx = (int)(pOp - aOp); +#ifdef SQLITE_DEBUG + if( pOp->p2==OE_Abort ){ sqlite3VdbeAssertAbortable(p); } +#endif if( pOp->p1==SQLITE_OK && p->pFrame ){ /* Halt the sub-program. Return control to the parent frame. */ pFrame = p->pFrame; @@ -79147,7 +83087,7 @@ case OP_Null: { /* out2 */ case OP_SoftNull: { assert( pOp->p1>0 && pOp->p1<=(p->nMem+1 - p->nCursor) ); pOut = &aMem[pOp->p1]; - pOut->flags = (pOut->flags|MEM_Null)&~MEM_Undefined; + pOut->flags = (pOut->flags&~(MEM_Undefined|MEM_AffMask))|MEM_Null; break; } @@ -79319,7 +83259,7 @@ case OP_ResultRow: { /* Run the progress counter just before returning. */ if( db->xProgress!=0 - && nVmStep>=nProgressLimit + && nVmStep>=nProgressLimit && db->xProgress(db->pProgressArg)!=0 ){ rc = SQLITE_INTERRUPT; @@ -79490,7 +83430,6 @@ case OP_Remainder: { /* same as TK_REM, in1, in2, out3 */ type2 = numericType(pIn2); pOut = &aMem[pOp->p3]; flags = pIn1->flags | pIn2->flags; - if( (flags & MEM_Null)!=0 ) goto arithmetic_result_is_null; if( (type1 & type2 & MEM_Int)!=0 ){ iA = pIn1->u.i; iB = pIn2->u.i; @@ -79514,6 +83453,8 @@ case OP_Remainder: { /* same as TK_REM, in1, in2, out3 */ } pOut->u.i = iB; MemSetTypeFlag(pOut, MEM_Int); + }else if( (flags & MEM_Null)!=0 ){ + goto arithmetic_result_is_null; }else{ bIntint = 0; fp_math: @@ -79561,7 +83502,7 @@ arithmetic_result_is_null: /* Opcode: CollSeq P1 * * P4 ** -** P4 is a pointer to a CollSeq struct. If the next call to a user function +** P4 is a pointer to a CollSeq object. If the next call to a user function ** or aggregate calls sqlite3GetFuncCollSeq(), this collation sequence will ** be returned. This is used by the built-in min(), max() and nullif() ** functions. @@ -79582,117 +83523,6 @@ case OP_CollSeq: { break; } -/* Opcode: Function0 P1 P2 P3 P4 P5 -** Synopsis: r[P3]=func(r[P2@P5]) -** -** Invoke a user function (P4 is a pointer to a FuncDef object that -** defines the function) with P5 arguments taken from register P2 and -** successors. The result of the function is stored in register P3. -** Register P3 must not be one of the function inputs. -** -** P1 is a 32-bit bitmask indicating whether or not each argument to the -** function was determined to be constant at compile time. If the first -** argument was constant then bit 0 of P1 is set. This is used to determine -** whether meta data associated with a user function argument using the -** sqlite3_set_auxdata() API may be safely retained until the next -** invocation of this opcode. -** -** See also: Function, AggStep, AggFinal -*/ -/* Opcode: Function P1 P2 P3 P4 P5 -** Synopsis: r[P3]=func(r[P2@P5]) -** -** Invoke a user function (P4 is a pointer to an sqlite3_context object that -** contains a pointer to the function to be run) with P5 arguments taken -** from register P2 and successors. The result of the function is stored -** in register P3. Register P3 must not be one of the function inputs. -** -** P1 is a 32-bit bitmask indicating whether or not each argument to the -** function was determined to be constant at compile time. If the first -** argument was constant then bit 0 of P1 is set. This is used to determine -** whether meta data associated with a user function argument using the -** sqlite3_set_auxdata() API may be safely retained until the next -** invocation of this opcode. -** -** SQL functions are initially coded as OP_Function0 with P4 pointing -** to a FuncDef object. But on first evaluation, the P4 operand is -** automatically converted into an sqlite3_context object and the operation -** changed to this OP_Function opcode. In this way, the initialization of -** the sqlite3_context object occurs only once, rather than once for each -** evaluation of the function. -** -** See also: Function0, AggStep, AggFinal -*/ -case OP_Function0: { - int n; - sqlite3_context *pCtx; - - assert( pOp->p4type==P4_FUNCDEF ); - n = pOp->p5; - assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) ); - assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem+1 - p->nCursor)+1) ); - assert( pOp->p3<pOp->p2 || pOp->p3>=pOp->p2+n ); - pCtx = sqlite3DbMallocRawNN(db, sizeof(*pCtx) + (n-1)*sizeof(sqlite3_value*)); - if( pCtx==0 ) goto no_mem; - pCtx->pOut = 0; - pCtx->pFunc = pOp->p4.pFunc; - pCtx->iOp = (int)(pOp - aOp); - pCtx->pVdbe = p; - pCtx->argc = n; - pOp->p4type = P4_FUNCCTX; - pOp->p4.pCtx = pCtx; - pOp->opcode = OP_Function; - /* Fall through into OP_Function */ -} -case OP_Function: { - int i; - sqlite3_context *pCtx; - - assert( pOp->p4type==P4_FUNCCTX ); - pCtx = pOp->p4.pCtx; - - /* If this function is inside of a trigger, the register array in aMem[] - ** might change from one evaluation to the next. The next block of code - ** checks to see if the register array has changed, and if so it - ** reinitializes the relavant parts of the sqlite3_context object */ - pOut = &aMem[pOp->p3]; - if( pCtx->pOut != pOut ){ - pCtx->pOut = pOut; - for(i=pCtx->argc-1; i>=0; i--) pCtx->argv[i] = &aMem[pOp->p2+i]; - } - - memAboutToChange(p, pCtx->pOut); -#ifdef SQLITE_DEBUG - for(i=0; i<pCtx->argc; i++){ - assert( memIsValid(pCtx->argv[i]) ); - REGISTER_TRACE(pOp->p2+i, pCtx->argv[i]); - } -#endif - MemSetTypeFlag(pCtx->pOut, MEM_Null); - pCtx->fErrorOrAux = 0; - (*pCtx->pFunc->xSFunc)(pCtx, pCtx->argc, pCtx->argv);/* IMP: R-24505-23230 */ - - /* If the function returned an error, throw an exception */ - if( pCtx->fErrorOrAux ){ - if( pCtx->isError ){ - sqlite3VdbeError(p, "%s", sqlite3_value_text(pCtx->pOut)); - rc = pCtx->isError; - } - sqlite3VdbeDeleteAuxData(db, &p->pAuxData, pCtx->iOp, pOp->p1); - if( rc ) goto abort_due_to_error; - } - - /* Copy the result of the function into register P3 */ - if( pOut->flags & (MEM_Str|MEM_Blob) ){ - sqlite3VdbeChangeEncoding(pCtx->pOut, encoding); - if( sqlite3VdbeMemTooBig(pCtx->pOut) ) goto too_big; - } - - REGISTER_TRACE(pOp->p3, pCtx->pOut); - UPDATE_MAX_BLOBSIZE(pCtx->pOut); - break; -} - /* Opcode: BitAnd P1 P2 P3 * * ** Synopsis: r[P3]=r[P1]&r[P2] ** @@ -79842,11 +83672,11 @@ case OP_RealAffinity: { /* in1 */ ** Force the value in register P1 to be the type defined by P2. ** ** <ul> -** <li value="97"> TEXT -** <li value="98"> BLOB -** <li value="99"> NUMERIC -** <li value="100"> INTEGER -** <li value="101"> REAL +** <li> P2=='A' → BLOB +** <li> P2=='B' → TEXT +** <li> P2=='C' → NUMERIC +** <li> P2=='D' → INTEGER +** <li> P2=='E' → REAL ** </ul> ** ** A NULL value is not changed by this routine. It remains NULL. @@ -80058,13 +83888,23 @@ case OP_Ge: { /* same as TK_GE, jump, in1, in3 */ res = sqlite3MemCompare(pIn3, pIn1, pOp->p4.pColl); } compare_op: - switch( pOp->opcode ){ - case OP_Eq: res2 = res==0; break; - case OP_Ne: res2 = res; break; - case OP_Lt: res2 = res<0; break; - case OP_Le: res2 = res<=0; break; - case OP_Gt: res2 = res>0; break; - default: res2 = res>=0; break; + /* At this point, res is negative, zero, or positive if reg[P1] is + ** less than, equal to, or greater than reg[P3], respectively. Compute + ** the answer to this operator in res2, depending on what the comparison + ** operator actually is. The next block of code depends on the fact + ** that the 6 comparison operators are consecutive integers in this + ** order: NE, EQ, GT, LE, LT, GE */ + assert( OP_Eq==OP_Ne+1 ); assert( OP_Gt==OP_Ne+2 ); assert( OP_Le==OP_Ne+3 ); + assert( OP_Lt==OP_Ne+4 ); assert( OP_Ge==OP_Ne+5 ); + if( res<0 ){ /* ne, eq, gt, le, lt, ge */ + static const unsigned char aLTb[] = { 1, 0, 0, 1, 1, 0 }; + res2 = aLTb[pOp->opcode - OP_Ne]; + }else if( res==0 ){ + static const unsigned char aEQb[] = { 0, 1, 0, 1, 0, 1 }; + res2 = aEQb[pOp->opcode - OP_Ne]; + }else{ + static const unsigned char aGTb[] = { 1, 0, 1, 0, 0, 1 }; + res2 = aGTb[pOp->opcode - OP_Ne]; } /* Undo any changes made by applyAffinity() to the input registers. */ @@ -80076,7 +83916,6 @@ compare_op: if( pOp->p5 & SQLITE_STOREP2 ){ pOut = &aMem[pOp->p2]; iCompare = res; - res2 = res2!=0; /* For this path res2 must be exactly 0 or 1 */ if( (pOp->p5 & SQLITE_KEEPNULL)!=0 ){ /* The KEEPNULL flag prevents OP_Eq from overwriting a NULL with 1 ** and prevents OP_Ne from overwriting NULL with 0. This flag @@ -80190,7 +84029,7 @@ case OP_Compare: { assert( pKeyInfo!=0 ); p1 = pOp->p1; p2 = pOp->p2; -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG if( aPermute ){ int k, mx = 0; for(k=0; k<n; k++) if( aPermute[k]>mx ) mx = aPermute[k]; @@ -80207,7 +84046,7 @@ case OP_Compare: { assert( memIsValid(&aMem[p2+idx]) ); REGISTER_TRACE(p1+idx, &aMem[p1+idx]); REGISTER_TRACE(p2+idx, &aMem[p2+idx]); - assert( i<pKeyInfo->nField ); + assert( i<pKeyInfo->nKeyField ); pColl = pKeyInfo->aColl[i]; bRev = pKeyInfo->aSortOrder[i]; iCompare = sqlite3MemCompare(&aMem[p1+idx], &aMem[p2+idx], pColl); @@ -80261,18 +84100,8 @@ case OP_Or: { /* same as TK_OR, in1, in2, out3 */ int v1; /* Left operand: 0==FALSE, 1==TRUE, 2==UNKNOWN or NULL */ int v2; /* Right operand: 0==FALSE, 1==TRUE, 2==UNKNOWN or NULL */ - pIn1 = &aMem[pOp->p1]; - if( pIn1->flags & MEM_Null ){ - v1 = 2; - }else{ - v1 = sqlite3VdbeIntValue(pIn1)!=0; - } - pIn2 = &aMem[pOp->p2]; - if( pIn2->flags & MEM_Null ){ - v2 = 2; - }else{ - v2 = sqlite3VdbeIntValue(pIn2)!=0; - } + v1 = sqlite3VdbeBooleanValue(&aMem[pOp->p1], 2); + v2 = sqlite3VdbeBooleanValue(&aMem[pOp->p2], 2); if( pOp->opcode==OP_And ){ static const unsigned char and_logic[] = { 0, 0, 0, 0, 1, 2, 0, 2, 2 }; v1 = and_logic[v1*3+v2]; @@ -80290,6 +84119,35 @@ case OP_Or: { /* same as TK_OR, in1, in2, out3 */ break; } +/* Opcode: IsTrue P1 P2 P3 P4 * +** Synopsis: r[P2] = coalesce(r[P1]==TRUE,P3) ^ P4 +** +** This opcode implements the IS TRUE, IS FALSE, IS NOT TRUE, and +** IS NOT FALSE operators. +** +** Interpret the value in register P1 as a boolean value. Store that +** boolean (a 0 or 1) in register P2. Or if the value in register P1 is +** NULL, then the P3 is stored in register P2. Invert the answer if P4 +** is 1. +** +** The logic is summarized like this: +** +** <ul> +** <li> If P3==0 and P4==0 then r[P2] := r[P1] IS TRUE +** <li> If P3==1 and P4==1 then r[P2] := r[P1] IS FALSE +** <li> If P3==0 and P4==1 then r[P2] := r[P1] IS NOT TRUE +** <li> If P3==1 and P4==0 then r[P2] := r[P1] IS NOT FALSE +** </ul> +*/ +case OP_IsTrue: { /* in1, out2 */ + assert( pOp->p4type==P4_INT32 ); + assert( pOp->p4.i==0 || pOp->p4.i==1 ); + assert( pOp->p3==0 || pOp->p3==1 ); + sqlite3VdbeMemSetInt64(&aMem[pOp->p2], + sqlite3VdbeBooleanValue(&aMem[pOp->p1], pOp->p3) ^ pOp->p4.i); + break; +} + /* Opcode: Not P1 P2 * * * ** Synopsis: r[P2]= !r[P1] ** @@ -80300,10 +84158,10 @@ case OP_Or: { /* same as TK_OR, in1, in2, out3 */ case OP_Not: { /* same as TK_NOT, in1, out2 */ pIn1 = &aMem[pOp->p1]; pOut = &aMem[pOp->p2]; - sqlite3VdbeMemSetNull(pOut); if( (pIn1->flags & MEM_Null)==0 ){ - pOut->flags = MEM_Int; - pOut->u.i = !sqlite3VdbeIntValue(pIn1); + sqlite3VdbeMemSetInt64(pOut, !sqlite3VdbeBooleanValue(pIn1,0)); + }else{ + sqlite3VdbeMemSetNull(pOut); } break; } @@ -80328,19 +84186,39 @@ case OP_BitNot: { /* same as TK_BITNOT, in1, out2 */ /* Opcode: Once P1 P2 * * * ** -** If the P1 value is equal to the P1 value on the OP_Init opcode at -** instruction 0, then jump to P2. If the two P1 values differ, then -** set the P1 value on this opcode to equal the P1 value on the OP_Init -** and fall through. +** Fall through to the next instruction the first time this opcode is +** encountered on each invocation of the byte-code program. Jump to P2 +** on the second and all subsequent encounters during the same invocation. +** +** Top-level programs determine first invocation by comparing the P1 +** operand against the P1 operand on the OP_Init opcode at the beginning +** of the program. If the P1 values differ, then fall through and make +** the P1 of this opcode equal to the P1 of OP_Init. If P1 values are +** the same then take the jump. +** +** For subprograms, there is a bitmask in the VdbeFrame that determines +** whether or not the jump should be taken. The bitmask is necessary +** because the self-altering code trick does not work for recursive +** triggers. */ case OP_Once: { /* jump */ + u32 iAddr; /* Address of this instruction */ assert( p->aOp[0].opcode==OP_Init ); - VdbeBranchTaken(p->aOp[0].p1==pOp->p1, 2); - if( p->aOp[0].p1==pOp->p1 ){ - goto jump_to_p2; + if( p->pFrame ){ + iAddr = (int)(pOp - p->aOp); + if( (p->pFrame->aOnce[iAddr/8] & (1<<(iAddr & 7)))!=0 ){ + VdbeBranchTaken(1, 2); + goto jump_to_p2; + } + p->pFrame->aOnce[iAddr/8] |= 1<<(iAddr & 7); }else{ - pOp->p1 = p->aOp[0].p1; + if( p->aOp[0].p1==pOp->p1 ){ + VdbeBranchTaken(1, 2); + goto jump_to_p2; + } } + VdbeBranchTaken(0, 2); + pOp->p1 = p->aOp[0].p1; break; } @@ -80350,30 +84228,25 @@ case OP_Once: { /* jump */ ** is considered true if it is numeric and non-zero. If the value ** in P1 is NULL then take the jump if and only if P3 is non-zero. */ +case OP_If: { /* jump, in1 */ + int c; + c = sqlite3VdbeBooleanValue(&aMem[pOp->p1], pOp->p3); + VdbeBranchTaken(c!=0, 2); + if( c ) goto jump_to_p2; + break; +} + /* Opcode: IfNot P1 P2 P3 * * ** ** Jump to P2 if the value in register P1 is False. The value ** is considered false if it has a numeric value of zero. If the value ** in P1 is NULL then take the jump if and only if P3 is non-zero. */ -case OP_If: /* jump, in1 */ case OP_IfNot: { /* jump, in1 */ int c; - pIn1 = &aMem[pOp->p1]; - if( pIn1->flags & MEM_Null ){ - c = pOp->p3; - }else{ -#ifdef SQLITE_OMIT_FLOATING_POINT - c = sqlite3VdbeIntValue(pIn1)!=0; -#else - c = sqlite3VdbeRealValue(pIn1)!=0.0; -#endif - if( pOp->opcode==OP_IfNot ) c = !c; - } + c = !sqlite3VdbeBooleanValue(&aMem[pOp->p1], !pOp->p3); VdbeBranchTaken(c!=0, 2); - if( c ){ - goto jump_to_p2; - } + if( c ) goto jump_to_p2; break; } @@ -80405,6 +84278,54 @@ case OP_NotNull: { /* same as TK_NOTNULL, jump, in1 */ break; } +/* Opcode: IfNullRow P1 P2 P3 * * +** Synopsis: if P1.nullRow then r[P3]=NULL, goto P2 +** +** Check the cursor P1 to see if it is currently pointing at a NULL row. +** If it is, then set register P3 to NULL and jump immediately to P2. +** If P1 is not on a NULL row, then fall through without making any +** changes. +*/ +case OP_IfNullRow: { /* jump */ + assert( pOp->p1>=0 && pOp->p1<p->nCursor ); + assert( p->apCsr[pOp->p1]!=0 ); + if( p->apCsr[pOp->p1]->nullRow ){ + sqlite3VdbeMemSetNull(aMem + pOp->p3); + goto jump_to_p2; + } + break; +} + +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC +/* Opcode: Offset P1 P2 P3 * * +** Synopsis: r[P3] = sqlite_offset(P1) +** +** Store in register r[P3] the byte offset into the database file that is the +** start of the payload for the record at which that cursor P1 is currently +** pointing. +** +** P2 is the column number for the argument to the sqlite_offset() function. +** This opcode does not use P2 itself, but the P2 value is used by the +** code generator. The P1, P2, and P3 operands to this opcode are the +** same as for OP_Column. +** +** This opcode is only available if SQLite is compiled with the +** -DSQLITE_ENABLE_OFFSET_SQL_FUNC option. +*/ +case OP_Offset: { /* out3 */ + VdbeCursor *pC; /* The VDBE cursor */ + assert( pOp->p1>=0 && pOp->p1<p->nCursor ); + pC = p->apCsr[pOp->p1]; + pOut = &p->aMem[pOp->p3]; + if( NEVER(pC==0) || pC->eCurType!=CURTYPE_BTREE ){ + sqlite3VdbeMemSetNull(pOut); + }else{ + sqlite3VdbeMemSetInt64(pOut, sqlite3BtreeOffset(pC->uc.pCursor)); + } + break; +} +#endif /* SQLITE_ENABLE_OFFSET_SQL_FUNC */ + /* Opcode: Column P1 P2 P3 P4 P5 ** Synopsis: r[P3]=PX ** @@ -80416,7 +84337,7 @@ case OP_NotNull: { /* same as TK_NOTNULL, jump, in1 */ ** ** The value extracted is stored in register P3. ** -** If the column contains fewer than P2 fields, then extract a NULL. Or, +** If the record contains fewer than P2 fields, then extract a NULL. Or, ** if the P4 argument is a P4_MEM use the value of the P4 argument as ** the result. ** @@ -80425,7 +84346,7 @@ case OP_NotNull: { /* same as TK_NOTNULL, jump, in1 */ ** The first OP_Column against a pseudo-table after the value of the content ** register has changed should have this bit set. ** -** If the OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG bits are set on P5 when +** If the OPFLAG_LENGTHARG and OPFLAG_TYPEOFARG bits are set on P5 then ** the result is guaranteed to only be used as the argument of a length() ** or typeof() function, respectively. The loading of large blobs can be ** skipped for length() and all content loading can be skipped for typeof(). @@ -80442,16 +84363,16 @@ case OP_Column: { const u8 *zData; /* Part of the record being decoded */ const u8 *zHdr; /* Next unparsed byte of the header */ const u8 *zEndHdr; /* Pointer to first byte after the header */ - u32 offset; /* Offset into the data */ u64 offset64; /* 64-bit offset */ - u32 avail; /* Number of bytes of available data */ u32 t; /* A type code from the record header */ Mem *pReg; /* PseudoTable input register */ pC = p->apCsr[pOp->p1]; p2 = pOp->p2; - /* If the cursor cache is stale, bring it up-to-date */ + /* If the cursor cache is stale (meaning it is not currently point at + ** the correct row) then bring it up-to-date by doing the necessary + ** B-Tree seek. */ rc = sqlite3VdbeCursorMoveto(&pC, &p2); if( rc ) goto abort_due_to_error; @@ -80469,11 +84390,13 @@ case OP_Column: { if( pC->cacheStatus!=p->cacheCtr ){ /*OPTIMIZATION-IF-FALSE*/ if( pC->nullRow ){ if( pC->eCurType==CURTYPE_PSEUDO ){ - assert( pC->uc.pseudoTableReg>0 ); - pReg = &aMem[pC->uc.pseudoTableReg]; + /* For the special case of as pseudo-cursor, the seekResult field + ** identifies the register that holds the record */ + assert( pC->seekResult>0 ); + pReg = &aMem[pC->seekResult]; assert( pReg->flags & MEM_Blob ); assert( memIsValid(pReg) ); - pC->payloadSize = pC->szRow = avail = pReg->n; + pC->payloadSize = pC->szRow = pReg->n; pC->aRow = (u8*)pReg->z; }else{ sqlite3VdbeMemSetNull(pDest); @@ -80485,23 +84408,19 @@ case OP_Column: { assert( pCrsr ); assert( sqlite3BtreeCursorIsValid(pCrsr) ); pC->payloadSize = sqlite3BtreePayloadSize(pCrsr); - pC->aRow = sqlite3BtreePayloadFetch(pCrsr, &avail); - assert( avail<=65536 ); /* Maximum page size is 64KiB */ - if( pC->payloadSize <= (u32)avail ){ - pC->szRow = pC->payloadSize; - }else if( pC->payloadSize > (u32)db->aLimit[SQLITE_LIMIT_LENGTH] ){ + pC->aRow = sqlite3BtreePayloadFetch(pCrsr, &pC->szRow); + assert( pC->szRow<=pC->payloadSize ); + assert( pC->szRow<=65536 ); /* Maximum page size is 64KiB */ + if( pC->payloadSize > (u32)db->aLimit[SQLITE_LIMIT_LENGTH] ){ goto too_big; - }else{ - pC->szRow = avail; } } pC->cacheStatus = p->cacheCtr; - pC->iHdrOffset = getVarint32(pC->aRow, offset); + pC->iHdrOffset = getVarint32(pC->aRow, aOffset[0]); pC->nHdrParsed = 0; - aOffset[0] = offset; - if( avail<offset ){ /*OPTIMIZATION-IF-FALSE*/ + if( pC->szRow<aOffset[0] ){ /*OPTIMIZATION-IF-FALSE*/ /* pC->aRow does not have to hold the entire row, but it does at least ** need to cover the header of the record. If pC->aRow does not contain ** the complete header, then set it to zero, forcing the header to be @@ -80518,17 +84437,26 @@ case OP_Column: { ** 3-byte type for each of the maximum of 32768 columns plus three ** extra bytes for the header length itself. 32768*3 + 3 = 98307. */ - if( offset > 98307 || offset > pC->payloadSize ){ - rc = SQLITE_CORRUPT_BKPT; - goto abort_due_to_error; + if( aOffset[0] > 98307 || aOffset[0] > pC->payloadSize ){ + goto op_column_corrupt; } - }else if( offset>0 ){ /*OPTIMIZATION-IF-TRUE*/ - /* The following goto is an optimization. It can be omitted and - ** everything will still work. But OP_Column is measurably faster - ** by skipping the subsequent conditional, which is always true. + }else{ + /* This is an optimization. By skipping over the first few tests + ** (ex: pC->nHdrParsed<=p2) in the next section, we achieve a + ** measurable performance gain. + ** + ** This branch is taken even if aOffset[0]==0. Such a record is never + ** generated by SQLite, and could be considered corruption, but we + ** accept it for historical reasons. When aOffset[0]==0, the code this + ** branch jumps to reads past the end of the record, but never more + ** than a few bytes. Even if the record occurs at the end of the page + ** content area, the "page header" comes after the page content and so + ** this overread is harmless. Similar overreads can occur for a corrupt + ** database file. */ zData = pC->aRow; assert( pC->nHdrParsed<=p2 ); /* Conditional skipped */ + testcase( aOffset[0]==0 ); goto op_column_read_header; } } @@ -80557,6 +84485,7 @@ case OP_Column: { offset64 = aOffset[i]; zHdr = zData + pC->iHdrOffset; zEndHdr = zData + aOffset[0]; + testcase( zHdr>=zEndHdr ); do{ if( (t = zHdr[0])<0x80 ){ zHdr++; @@ -80577,9 +84506,13 @@ case OP_Column: { if( (zHdr>=zEndHdr && (zHdr>zEndHdr || offset64!=pC->payloadSize)) || (offset64 > pC->payloadSize) ){ - if( pC->aRow==0 ) sqlite3VdbeMemRelease(&sMem); - rc = SQLITE_CORRUPT_BKPT; - goto abort_due_to_error; + if( aOffset[0]==0 ){ + i = 0; + zHdr = zEndHdr; + }else{ + if( pC->aRow==0 ) sqlite3VdbeMemRelease(&sMem); + goto op_column_corrupt; + } } pC->nHdrParsed = i; @@ -80653,8 +84586,13 @@ case OP_Column: { ** 2. the length(X) function if X is a blob, and ** 3. if the content length is zero. ** So we might as well use bogus content rather than reading - ** content from disk. */ - static u8 aZero[8]; /* This is the bogus content */ + ** content from disk. + ** + ** Although sqlite3VdbeSerialGet() may read at most 8 bytes from the + ** buffer passed to it, debugging function VdbeMemPrettyPrint() may + ** read up to 16. So 16 bytes of bogus content is supplied. + */ + static u8 aZero[16]; /* This is the bogus content */ sqlite3VdbeSerialGet(aZero, t, pDest); }else{ rc = sqlite3VdbeMemFromBtree(pC->uc.pCursor, aOffset[p2], len, pDest); @@ -80668,6 +84606,15 @@ op_column_out: UPDATE_MAX_BLOBSIZE(pDest); REGISTER_TRACE(pOp->p3, pDest); break; + +op_column_corrupt: + if( aOp[0].p3>0 ){ + pOp = &aOp[aOp[0].p3-1]; + break; + }else{ + rc = SQLITE_CORRUPT_BKPT; + goto abort_due_to_error; + } } /* Opcode: Affinity P1 P2 * P4 * @@ -80675,24 +84622,24 @@ op_column_out: ** ** Apply affinities to a range of P2 registers starting with P1. ** -** P4 is a string that is P2 characters long. The nth character of the -** string indicates the column affinity that should be used for the nth +** P4 is a string that is P2 characters long. The N-th character of the +** string indicates the column affinity that should be used for the N-th ** memory cell in the range. */ case OP_Affinity: { const char *zAffinity; /* The affinity to be applied */ - char cAff; /* A single character of affinity */ zAffinity = pOp->p4.z; assert( zAffinity!=0 ); + assert( pOp->p2>0 ); assert( zAffinity[pOp->p2]==0 ); pIn1 = &aMem[pOp->p1]; - while( (cAff = *(zAffinity++))!=0 ){ + do{ assert( pIn1 <= &p->aMem[(p->nMem+1 - p->nCursor)] ); assert( memIsValid(pIn1) ); - applyAffinity(pIn1, cAff, encoding); + applyAffinity(pIn1, *(zAffinity++), encoding); pIn1++; - } + }while( zAffinity[0] ); break; } @@ -80703,8 +84650,8 @@ case OP_Affinity: { ** use as a data record in a database table or as a key ** in an index. The OP_Column opcode can decode the record later. ** -** P4 may be a string that is P2 characters long. The nth character of the -** string indicates the column affinity that should be used for the nth +** P4 may be a string that is P2 characters long. The N-th character of the +** string indicates the column affinity that should be used for the N-th ** field of the index key. ** ** The mapping from character to affinity is given by the SQLITE_AFF_ @@ -80792,9 +84739,18 @@ case OP_MakeRecord: { pRec = pLast; do{ assert( memIsValid(pRec) ); - pRec->uTemp = serial_type = sqlite3VdbeSerialType(pRec, file_format, &len); + serial_type = sqlite3VdbeSerialType(pRec, file_format, &len); if( pRec->flags & MEM_Zero ){ - if( nData ){ + if( serial_type==0 ){ + /* Values with MEM_Null and MEM_Zero are created by xColumn virtual + ** table methods that never invoke sqlite3_result_xxxxx() while + ** computing an unchanging column value in an UPDATE statement. + ** Give such values a special internal-use-only serial-type of 10 + ** so that they can be passed through to xUpdate and have + ** a true sqlite3_value_nochange(). */ + assert( pOp->p5==OPFLAG_NOCHNG_MAGIC || CORRUPT_DB ); + serial_type = 10; + }else if( nData ){ if( sqlite3VdbeMemExpandBlob(pRec) ) goto no_mem; }else{ nZero += pRec->u.nZero; @@ -80805,6 +84761,7 @@ case OP_MakeRecord: { testcase( serial_type==127 ); testcase( serial_type==128 ); nHdr += serial_type<=127 ? 1 : sqlite3VarintLen(serial_type); + pRec->uTemp = serial_type; if( pRec==pData0 ) break; pRec--; }while(1); @@ -80863,7 +84820,6 @@ case OP_MakeRecord: { pOut->u.nZero = nZero; pOut->flags |= MEM_Zero; } - pOut->enc = SQLITE_UTF8; /* In case the blob is ever converted to text */ REGISTER_TRACE(pOp->p3, pOut); UPDATE_MAX_BLOBSIZE(pOut); break; @@ -81009,7 +84965,7 @@ case OP_Savepoint: { int isSchemaChange; iSavepoint = db->nSavepoint - iSavepoint - 1; if( p1==SAVEPOINT_ROLLBACK ){ - isSchemaChange = (db->flags & SQLITE_InternChanges)!=0; + isSchemaChange = (db->mDbFlags & DBFLAG_SchemaChange)!=0; for(ii=0; ii<db->nDb; ii++){ rc = sqlite3BtreeTripAllCursors(db->aDb[ii].pBt, SQLITE_ABORT_ROLLBACK, @@ -81028,7 +84984,7 @@ case OP_Savepoint: { if( isSchemaChange ){ sqlite3ExpirePreparedStatements(db); sqlite3ResetAllSchemasOfConnection(db); - db->flags = (db->flags | SQLITE_InternChanges); + db->mDbFlags |= DBFLAG_SchemaChange; } } @@ -81296,6 +85252,8 @@ case OP_ReadCookie: { /* out2 */ */ case OP_SetCookie: { Db *pDb; + + sqlite3VdbeIncrWriteCounter(p, 0); assert( pOp->p2<SQLITE_N_BTREE_META ); assert( pOp->p1>=0 && pOp->p1<db->nDb ); assert( DbMaskTest(p->btreeMask, pOp->p1) ); @@ -81308,7 +85266,7 @@ case OP_SetCookie: { if( pOp->p2==BTREE_SCHEMA_VERSION ){ /* When the schema cookie changes, record the new cookie internally */ pDb->pSchema->schema_cookie = pOp->p3; - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; }else if( pOp->p2==BTREE_FILE_FORMAT ){ /* Record changes in the file format */ pDb->pSchema->file_format = pOp->p3; @@ -81447,7 +85405,7 @@ case OP_OpenWrite: assert( (pIn2->flags & MEM_Int)!=0 ); sqlite3VdbeMemIntegerify(pIn2); p2 = (int)pIn2->u.i; - /* The p2 value always comes from a prior OP_CreateTable opcode and + /* The p2 value always comes from a prior OP_CreateBtree opcode and ** that opcode will always set the p2 value to 2 or more or else fail. ** If there were a failure, the prepared statement would have halted ** before reaching this instruction. */ @@ -81457,7 +85415,7 @@ case OP_OpenWrite: pKeyInfo = pOp->p4.pKeyInfo; assert( pKeyInfo->enc==ENC(db) ); assert( pKeyInfo->db==db ); - nField = pKeyInfo->nField+pKeyInfo->nXField; + nField = pKeyInfo->nAllField; }else if( pOp->p4type==P4_INT32 ){ nField = pOp->p4.i; } @@ -81493,6 +85451,37 @@ open_cursor_set_hints: break; } +/* Opcode: OpenDup P1 P2 * * * +** +** Open a new cursor P1 that points to the same ephemeral table as +** cursor P2. The P2 cursor must have been opened by a prior OP_OpenEphemeral +** opcode. Only ephemeral cursors may be duplicated. +** +** Duplicate ephemeral cursors are used for self-joins of materialized views. +*/ +case OP_OpenDup: { + VdbeCursor *pOrig; /* The original cursor to be duplicated */ + VdbeCursor *pCx; /* The new cursor */ + + pOrig = p->apCsr[pOp->p2]; + assert( pOrig->pBtx!=0 ); /* Only ephemeral cursors can be duplicated */ + + pCx = allocateCursor(p, pOp->p1, pOrig->nField, -1, CURTYPE_BTREE); + if( pCx==0 ) goto no_mem; + pCx->nullRow = 1; + pCx->isEphemeral = 1; + pCx->pKeyInfo = pOrig->pKeyInfo; + pCx->isTable = pOrig->isTable; + rc = sqlite3BtreeCursor(pOrig->pBtx, MASTER_ROOT, BTREE_WRCSR, + pCx->pKeyInfo, pCx->uc.pCursor); + /* The sqlite3BtreeCursor() routine can only fail for the first cursor + ** opened for a database. Since there is already an open cursor when this + ** opcode is run, the sqlite3BtreeCursor() cannot fail */ + assert( rc==SQLITE_OK ); + break; +} + + /* Opcode: OpenEphemeral P1 P2 * P4 P5 ** Synopsis: nColumn=P2 ** @@ -81637,8 +85626,13 @@ case OP_OpenPseudo: { pCx = allocateCursor(p, pOp->p1, pOp->p3, -1, CURTYPE_PSEUDO); if( pCx==0 ) goto no_mem; pCx->nullRow = 1; - pCx->uc.pseudoTableReg = pOp->p2; + pCx->seekResult = pOp->p2; pCx->isTable = 1; + /* Give this pseudo-cursor a fake BtCursor pointer so that pCx + ** can be safely passed to sqlite3VdbeCursorMoveto(). This avoids a test + ** for pCx->eCurType==CURTYPE_BTREE inside of sqlite3VdbeCursorMoveto() + ** which is a performance optimization */ + pCx->uc.pCursor = sqlite3BtreeFakeValidCursor(); assert( pOp->p5==0 ); break; } @@ -81898,8 +85892,15 @@ case OP_SeekGT: { /* jump, in3 */ if( oc>=OP_SeekGE ){ assert( oc==OP_SeekGE || oc==OP_SeekGT ); if( res<0 || (res==0 && oc==OP_SeekGT) ){ res = 0; - rc = sqlite3BtreeNext(pC->uc.pCursor, &res); - if( rc!=SQLITE_OK ) goto abort_due_to_error; + rc = sqlite3BtreeNext(pC->uc.pCursor, 0); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_DONE ){ + rc = SQLITE_OK; + res = 1; + }else{ + goto abort_due_to_error; + } + } }else{ res = 0; } @@ -81907,8 +85908,15 @@ case OP_SeekGT: { /* jump, in3 */ assert( oc==OP_SeekLT || oc==OP_SeekLE ); if( res>0 || (res==0 && oc==OP_SeekLT) ){ res = 0; - rc = sqlite3BtreePrevious(pC->uc.pCursor, &res); - if( rc!=SQLITE_OK ) goto abort_due_to_error; + rc = sqlite3BtreePrevious(pC->uc.pCursor, 0); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_DONE ){ + rc = SQLITE_OK; + res = 1; + }else{ + goto abort_due_to_error; + } + } }else{ /* res might be negative because the table is empty. Check to ** see if this is the case. @@ -82028,10 +86036,12 @@ case OP_Found: { /* jump, in3 */ pIdxKey = &r; pFree = 0; }else{ + assert( pIn3->flags & MEM_Blob ); + rc = ExpandBlob(pIn3); + assert( rc==SQLITE_OK || rc==SQLITE_NOMEM ); + if( rc ) goto no_mem; pFree = pIdxKey = sqlite3VdbeAllocUnpackedRecord(pC->pKeyInfo); if( pIdxKey==0 ) goto no_mem; - assert( pIn3->flags & MEM_Blob ); - (void)ExpandBlob(pIn3); sqlite3VdbeRecordUnpack(pC->pKeyInfo, pIn3->n, pIn3->z, pIdxKey); } pIdxKey->default_rc = 0; @@ -82048,7 +86058,7 @@ case OP_Found: { /* jump, in3 */ } } rc = sqlite3BtreeMovetoUnpacked(pC->uc.pCursor, pIdxKey, 0, 0, &res); - if( pFree ) sqlite3DbFree(db, pFree); + if( pFree ) sqlite3DbFreeNN(db, pFree); if( rc!=SQLITE_OK ){ goto abort_due_to_error; } @@ -82208,6 +86218,7 @@ case OP_NewRowid: { /* out2 */ assert( pOp->p1>=0 && pOp->p1<p->nCursor ); pC = p->apCsr[pOp->p1]; assert( pC!=0 ); + assert( pC->isTable ); assert( pC->eCurType==CURTYPE_BTREE ); assert( pC->uc.pCursor!=0 ); { @@ -82364,10 +86375,8 @@ case OP_InsertInt: { int seekResult; /* Result of prior seek or 0 if no USESEEKRESULT flag */ const char *zDb; /* database name - used by the update hook */ Table *pTab; /* Table structure - used by update and pre-update hooks */ - int op; /* Opcode for update hook: SQLITE_UPDATE or SQLITE_INSERT */ BtreePayload x; /* Payload to be inserted */ - op = 0; pData = &aMem[pOp->p2]; assert( pOp->p1>=0 && pOp->p1<p->nCursor ); assert( memIsValid(pData) ); @@ -82378,6 +86387,7 @@ case OP_InsertInt: { assert( (pOp->p5 & OPFLAG_ISNOOP) || pC->isTable ); assert( pOp->p4type==P4_TABLE || pOp->p4type>=P4_STATIC ); REGISTER_TRACE(pOp->p2, pData); + sqlite3VdbeIncrWriteCounter(p, pC); if( pOp->opcode==OP_Insert ){ pKey = &aMem[pOp->p3]; @@ -82395,33 +86405,30 @@ case OP_InsertInt: { zDb = db->aDb[pC->iDb].zDbSName; pTab = pOp->p4.pTab; assert( (pOp->p5 & OPFLAG_ISNOOP) || HasRowid(pTab) ); - op = ((pOp->p5 & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_INSERT); }else{ - pTab = 0; /* Not needed. Silence a compiler warning. */ + pTab = 0; zDb = 0; /* Not needed. Silence a compiler warning. */ } #ifdef SQLITE_ENABLE_PREUPDATE_HOOK /* Invoke the pre-update hook, if any */ - if( db->xPreUpdateCallback - && pOp->p4type==P4_TABLE - && !(pOp->p5 & OPFLAG_ISUPDATE) - ){ - sqlite3VdbePreUpdateHook(p, pC, SQLITE_INSERT, zDb, pTab, x.nKey, pOp->p2); + if( pTab ){ + if( db->xPreUpdateCallback && !(pOp->p5 & OPFLAG_ISUPDATE) ){ + sqlite3VdbePreUpdateHook(p, pC, SQLITE_INSERT, zDb, pTab, x.nKey,pOp->p2); + } + if( db->xUpdateCallback==0 || pTab->aCol==0 ){ + /* Prevent post-update hook from running in cases when it should not */ + pTab = 0; + } } if( pOp->p5 & OPFLAG_ISNOOP ) break; #endif if( pOp->p5 & OPFLAG_NCHANGE ) p->nChange++; if( pOp->p5 & OPFLAG_LASTROWID ) db->lastRowid = x.nKey; - if( pData->flags & MEM_Null ){ - x.pData = 0; - x.nData = 0; - }else{ - assert( pData->flags & (MEM_Blob|MEM_Str) ); - x.pData = pData->z; - x.nData = pData->n; - } + assert( pData->flags & (MEM_Blob|MEM_Str) ); + x.pData = pData->z; + x.nData = pData->n; seekResult = ((pOp->p5 & OPFLAG_USESEEKRESULT) ? pC->seekResult : 0); if( pData->flags & MEM_Zero ){ x.nZero = pData->u.nZero; @@ -82437,8 +86444,12 @@ case OP_InsertInt: { /* Invoke the update-hook if required. */ if( rc ) goto abort_due_to_error; - if( db->xUpdateCallback && op ){ - db->xUpdateCallback(db->pUpdateArg, op, zDb, pTab->zName, x.nKey); + if( pTab ){ + assert( db->xUpdateCallback!=0 ); + assert( pTab->aCol!=0 ); + db->xUpdateCallback(db->pUpdateArg, + (pOp->p5 & OPFLAG_ISUPDATE) ? SQLITE_UPDATE : SQLITE_INSERT, + zDb, pTab->zName, x.nKey); } break; } @@ -82491,6 +86502,7 @@ case OP_Delete: { assert( pC->eCurType==CURTYPE_BTREE ); assert( pC->uc.pCursor!=0 ); assert( pC->deferredMoveto==0 ); + sqlite3VdbeIncrWriteCounter(p, pC); #ifdef SQLITE_DEBUG if( pOp->p4type==P4_TABLE && HasRowid(pOp->p4.pTab) && pOp->p5==0 ){ @@ -82659,10 +86671,10 @@ case OP_SorterData: { ** If the P1 cursor must be pointing to a valid row (not a NULL row) ** of a real table, not a pseudo-table. ** -** If P3!=0 then this opcode is allowed to make an ephermeral pointer +** If P3!=0 then this opcode is allowed to make an ephemeral pointer ** into the database page. That means that the content of the output ** register will be invalidated as soon as the cursor moves - including -** moves caused by other cursors that "save" the the current cursors +** moves caused by other cursors that "save" the current cursors ** position in order that they can write to the same table. If P3==0 ** then a copy of the data is made into memory. P3!=0 is faster, but ** P3==0 is safer. @@ -82788,7 +86800,17 @@ case OP_NullRow: { break; } -/* Opcode: Last P1 P2 P3 * * +/* Opcode: SeekEnd P1 * * * * +** +** Position cursor P1 at the end of the btree for the purpose of +** appending a new entry onto the btree. +** +** It is assumed that the cursor is used only for appending and so +** if the cursor is valid, then the cursor must already be pointing +** at the end of the btree and so no changes are made to +** the cursor. +*/ +/* Opcode: Last P1 P2 * * * ** ** The next use of the Rowid or Column or Prev instruction for P1 ** will refer to the last entry in the database table or index. @@ -82799,14 +86821,8 @@ case OP_NullRow: { ** This opcode leaves the cursor configured to move in reverse order, ** from the end toward the beginning. In other words, the cursor is ** configured to use Prev, not Next. -** -** If P3 is -1, then the cursor is positioned at the end of the btree -** for the purpose of appending a new entry onto the btree. In that -** case P2 must be 0. It is assumed that the cursor is used only for -** appending and so if the cursor is valid, then the cursor must already -** be pointing at the end of the btree and so no changes are made to -** the cursor. */ +case OP_SeekEnd: case OP_Last: { /* jump */ VdbeCursor *pC; BtCursor *pCrsr; @@ -82819,23 +86835,52 @@ case OP_Last: { /* jump */ pCrsr = pC->uc.pCursor; res = 0; assert( pCrsr!=0 ); - pC->seekResult = pOp->p3; #ifdef SQLITE_DEBUG - pC->seekOp = OP_Last; + pC->seekOp = pOp->opcode; #endif - if( pOp->p3==0 || !sqlite3BtreeCursorIsValidNN(pCrsr) ){ - rc = sqlite3BtreeLast(pCrsr, &res); - pC->nullRow = (u8)res; - pC->deferredMoveto = 0; - pC->cacheStatus = CACHE_STALE; - if( rc ) goto abort_due_to_error; - if( pOp->p2>0 ){ - VdbeBranchTaken(res!=0,2); - if( res ) goto jump_to_p2; - } - }else{ + if( pOp->opcode==OP_SeekEnd ){ assert( pOp->p2==0 ); + pC->seekResult = -1; + if( sqlite3BtreeCursorIsValidNN(pCrsr) ){ + break; + } + } + rc = sqlite3BtreeLast(pCrsr, &res); + pC->nullRow = (u8)res; + pC->deferredMoveto = 0; + pC->cacheStatus = CACHE_STALE; + if( rc ) goto abort_due_to_error; + if( pOp->p2>0 ){ + VdbeBranchTaken(res!=0,2); + if( res ) goto jump_to_p2; + } + break; +} + +/* Opcode: IfSmaller P1 P2 P3 * * +** +** Estimate the number of rows in the table P1. Jump to P2 if that +** estimate is less than approximately 2**(0.1*P3). +*/ +case OP_IfSmaller: { /* jump */ + VdbeCursor *pC; + BtCursor *pCrsr; + int res; + i64 sz; + + assert( pOp->p1>=0 && pOp->p1<p->nCursor ); + pC = p->apCsr[pOp->p1]; + assert( pC!=0 ); + pCrsr = pC->uc.pCursor; + assert( pCrsr ); + rc = sqlite3BtreeFirst(pCrsr, &res); + if( rc ) goto abort_due_to_error; + if( res==0 ){ + sz = sqlite3BtreeRowCountEst(pCrsr); + if( ALWAYS(sz>=0) && sqlite3LogEst((u64)sz)<pOp->p3 ) res = 1; } + VdbeBranchTaken(res!=0,2); + if( res ) goto jump_to_p2; break; } @@ -82985,12 +87030,10 @@ case OP_Rewind: { /* jump */ */ case OP_SorterNext: { /* jump */ VdbeCursor *pC; - int res; pC = p->apCsr[pOp->p1]; assert( isSorter(pC) ); - res = 0; - rc = sqlite3VdbeSorterNext(db, pC, &res); + rc = sqlite3VdbeSorterNext(db, pC); goto next_tail; case OP_PrevIfOpen: /* jump */ case OP_NextIfOpen: /* jump */ @@ -83001,12 +87044,9 @@ case OP_Next: /* jump */ assert( pOp->p1>=0 && pOp->p1<p->nCursor ); assert( pOp->p5<ArraySize(p->aCounter) ); pC = p->apCsr[pOp->p1]; - res = pOp->p3; assert( pC!=0 ); assert( pC->deferredMoveto==0 ); assert( pC->eCurType==CURTYPE_BTREE ); - assert( res==0 || (res==1 && pC->isTable==0) ); - testcase( res==1 ); assert( pOp->opcode!=OP_Next || pOp->p4.xAdvance==sqlite3BtreeNext ); assert( pOp->opcode!=OP_Prev || pOp->p4.xAdvance==sqlite3BtreePrevious ); assert( pOp->opcode!=OP_NextIfOpen || pOp->p4.xAdvance==sqlite3BtreeNext ); @@ -83021,21 +87061,21 @@ case OP_Next: /* jump */ || pC->seekOp==OP_SeekLT || pC->seekOp==OP_SeekLE || pC->seekOp==OP_Last ); - rc = pOp->p4.xAdvance(pC->uc.pCursor, &res); + rc = pOp->p4.xAdvance(pC->uc.pCursor, pOp->p3); next_tail: pC->cacheStatus = CACHE_STALE; - VdbeBranchTaken(res==0,2); - if( rc ) goto abort_due_to_error; - if( res==0 ){ + VdbeBranchTaken(rc==SQLITE_OK,2); + if( rc==SQLITE_OK ){ pC->nullRow = 0; p->aCounter[pOp->p5]++; #ifdef SQLITE_TEST sqlite3_search_count++; #endif goto jump_to_p2_and_check_for_interrupt; - }else{ - pC->nullRow = 1; } + if( rc!=SQLITE_DONE ) goto abort_due_to_error; + rc = SQLITE_OK; + pC->nullRow = 1; goto check_for_interrupt; } @@ -83081,6 +87121,7 @@ case OP_IdxInsert: { /* in2 */ assert( pOp->p1>=0 && pOp->p1<p->nCursor ); pC = p->apCsr[pOp->p1]; + sqlite3VdbeIncrWriteCounter(p, pC); assert( pC!=0 ); assert( isSorter(pC)==(pOp->opcode==OP_SorterInsert) ); pIn2 = &aMem[pOp->p2]; @@ -83127,6 +87168,7 @@ case OP_IdxDelete: { pC = p->apCsr[pOp->p1]; assert( pC!=0 ); assert( pC->eCurType==CURTYPE_BTREE ); + sqlite3VdbeIncrWriteCounter(p, pC); pCrsr = pC->uc.pCursor; assert( pCrsr!=0 ); assert( pOp->p5==0 ); @@ -83146,8 +87188,8 @@ case OP_IdxDelete: { break; } -/* Opcode: Seek P1 * P3 P4 * -** Synopsis: Move P3 to P1.rowid +/* Opcode: DeferredSeek P1 * P3 P4 * +** Synopsis: Move P3 to P1.rowid if needed ** ** P1 is an open index cursor and P3 is a cursor on the corresponding ** table. This opcode does a deferred seek of the P3 table cursor @@ -83174,11 +87216,11 @@ case OP_IdxDelete: { ** ** See also: Rowid, MakeRecord. */ -case OP_Seek: -case OP_IdxRowid: { /* out2 */ - VdbeCursor *pC; /* The P1 index cursor */ - VdbeCursor *pTabCur; /* The P2 table cursor (OP_Seek only) */ - i64 rowid; /* Rowid that P1 current points to */ +case OP_DeferredSeek: +case OP_IdxRowid: { /* out2 */ + VdbeCursor *pC; /* The P1 index cursor */ + VdbeCursor *pTabCur; /* The P2 table cursor (OP_DeferredSeek only) */ + i64 rowid; /* Rowid that P1 current points to */ assert( pOp->p1>=0 && pOp->p1<p->nCursor ); pC = p->apCsr[pOp->p1]; @@ -83204,7 +87246,7 @@ case OP_IdxRowid: { /* out2 */ if( rc!=SQLITE_OK ){ goto abort_due_to_error; } - if( pOp->opcode==OP_Seek ){ + if( pOp->opcode==OP_DeferredSeek ){ assert( pOp->p3>=0 && pOp->p3<p->nCursor ); pTabCur = p->apCsr[pOp->p3]; assert( pTabCur!=0 ); @@ -83331,10 +87373,17 @@ case OP_IdxGE: { /* jump */ ** might be moved into the newly deleted root page in order to keep all ** root pages contiguous at the beginning of the database. The former ** value of the root page that moved - its value before the move occurred - -** is stored in register P2. If no page -** movement was required (because the table being dropped was already -** the last one in the database) then a zero is stored in register P2. -** If AUTOVACUUM is disabled then a zero is stored in register P2. +** is stored in register P2. If no page movement was required (because the +** table being dropped was already the last one in the database) then a +** zero is stored in register P2. If AUTOVACUUM is disabled then a zero +** is stored in register P2. +** +** This opcode throws an error if there are any active reader VMs when +** it is invoked. This is done to avoid the difficulty associated with +** updating existing cursors when a root page is moved in an AUTOVACUUM +** database. This error is thrown even if the database is not an AUTOVACUUM +** db in order to avoid introducing an incompatibility between autovacuum +** and non-autovacuum modes. ** ** See also: Clear */ @@ -83342,6 +87391,7 @@ case OP_Destroy: { /* out2 */ int iMoved; int iDb; + sqlite3VdbeIncrWriteCounter(p, 0); assert( p->readOnly==0 ); assert( pOp->p1>1 ); pOut = out2Prerelease(p, pOp); @@ -83391,6 +87441,7 @@ case OP_Destroy: { /* out2 */ case OP_Clear: { int nChange; + sqlite3VdbeIncrWriteCounter(p, 0); nChange = 0; assert( p->readOnly==0 ); assert( DbMaskTest(p->btreeMask, pOp->p2) ); @@ -83434,55 +87485,47 @@ case OP_ResetSorter: { break; } -/* Opcode: CreateTable P1 P2 * * * -** Synopsis: r[P2]=root iDb=P1 -** -** Allocate a new table in the main database file if P1==0 or in the -** auxiliary database file if P1==1 or in an attached database if -** P1>1. Write the root page number of the new table into -** register P2 +/* Opcode: CreateBtree P1 P2 P3 * * +** Synopsis: r[P2]=root iDb=P1 flags=P3 ** -** The difference between a table and an index is this: A table must -** have a 4-byte integer key and can have arbitrary data. An index -** has an arbitrary key but no data. -** -** See also: CreateIndex -*/ -/* Opcode: CreateIndex P1 P2 * * * -** Synopsis: r[P2]=root iDb=P1 -** -** Allocate a new index in the main database file if P1==0 or in the -** auxiliary database file if P1==1 or in an attached database if -** P1>1. Write the root page number of the new table into -** register P2. -** -** See documentation on OP_CreateTable for additional information. +** Allocate a new b-tree in the main database file if P1==0 or in the +** TEMP database file if P1==1 or in an attached database if +** P1>1. The P3 argument must be 1 (BTREE_INTKEY) for a rowid table +** it must be 2 (BTREE_BLOBKEY) for an index or WITHOUT ROWID table. +** The root page number of the new b-tree is stored in register P2. */ -case OP_CreateIndex: /* out2 */ -case OP_CreateTable: { /* out2 */ +case OP_CreateBtree: { /* out2 */ int pgno; - int flags; Db *pDb; + sqlite3VdbeIncrWriteCounter(p, 0); pOut = out2Prerelease(p, pOp); pgno = 0; + assert( pOp->p3==BTREE_INTKEY || pOp->p3==BTREE_BLOBKEY ); assert( pOp->p1>=0 && pOp->p1<db->nDb ); assert( DbMaskTest(p->btreeMask, pOp->p1) ); assert( p->readOnly==0 ); pDb = &db->aDb[pOp->p1]; assert( pDb->pBt!=0 ); - if( pOp->opcode==OP_CreateTable ){ - /* flags = BTREE_INTKEY; */ - flags = BTREE_INTKEY; - }else{ - flags = BTREE_BLOBKEY; - } - rc = sqlite3BtreeCreateTable(pDb->pBt, &pgno, flags); + rc = sqlite3BtreeCreateTable(pDb->pBt, &pgno, pOp->p3); if( rc ) goto abort_due_to_error; pOut->u.i = pgno; break; } +/* Opcode: SqlExec * * * P4 * +** +** Run the SQL statement or statements specified in the P4 string. +*/ +case OP_SqlExec: { + sqlite3VdbeIncrWriteCounter(p, 0); + db->nSqlExec++; + rc = sqlite3_exec(db, pOp->p4.z, 0, 0, 0); + db->nSqlExec--; + if( rc ) goto abort_due_to_error; + break; +} + /* Opcode: ParseSchema P1 * * P4 * ** ** Read and parse all entries from the SQLITE_MASTER table of database P1 @@ -83527,7 +87570,7 @@ case OP_ParseSchema: { assert( !db->mallocFailed ); rc = sqlite3_exec(db, zSql, sqlite3InitCallback, &initData, 0); if( rc==SQLITE_OK ) rc = initData.rc; - sqlite3DbFree(db, zSql); + sqlite3DbFreeNN(db, zSql); db->init.busy = 0; } } @@ -83565,6 +87608,7 @@ case OP_LoadAnalysis: { ** schema consistent with what is on disk. */ case OP_DropTable: { + sqlite3VdbeIncrWriteCounter(p, 0); sqlite3UnlinkAndDeleteTable(db, pOp->p1, pOp->p4.z); break; } @@ -83578,6 +87622,7 @@ case OP_DropTable: { ** schema consistent with what is on disk. */ case OP_DropIndex: { + sqlite3VdbeIncrWriteCounter(p, 0); sqlite3UnlinkAndDeleteIndex(db, pOp->p1, pOp->p4.z); break; } @@ -83591,6 +87636,7 @@ case OP_DropIndex: { ** schema consistent with what is on disk. */ case OP_DropTrigger: { + sqlite3VdbeIncrWriteCounter(p, 0); sqlite3UnlinkAndDeleteTrigger(db, pOp->p1, pOp->p4.z); break; } @@ -83603,7 +87649,7 @@ case OP_DropTrigger: { ** register P1 the text of an error message describing any problems. ** If no problems are found, store a NULL in register P1. ** -** The register P3 contains the maximum number of allowed errors. +** The register P3 contains one less than the maximum number of allowed errors. ** At most reg(P3) errors will be reported. ** In other words, the analysis stops as soon as reg(P1) errors are ** seen. Reg(P1) is updated with the number of errors remaining. @@ -83627,7 +87673,7 @@ case OP_IntegrityCk: { nRoot = pOp->p2; aRoot = pOp->p4.ai; assert( nRoot>0 ); - assert( aRoot[nRoot]==0 ); + assert( aRoot[0]==nRoot ); assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) ); pnErr = &aMem[pOp->p3]; assert( (pnErr->flags & MEM_Int)!=0 ); @@ -83635,15 +87681,15 @@ case OP_IntegrityCk: { pIn1 = &aMem[pOp->p1]; assert( pOp->p5<db->nDb ); assert( DbMaskTest(p->btreeMask, pOp->p5) ); - z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, aRoot, nRoot, - (int)pnErr->u.i, &nErr); - pnErr->u.i -= nErr; + z = sqlite3BtreeIntegrityCheck(db->aDb[pOp->p5].pBt, &aRoot[1], nRoot, + (int)pnErr->u.i+1, &nErr); sqlite3VdbeMemSetNull(pIn1); if( nErr==0 ){ assert( z==0 ); }else if( z==0 ){ goto no_mem; }else{ + pnErr->u.i -= nErr-1; sqlite3VdbeMemSetStr(pIn1, z, -1, SQLITE_UTF8, sqlite3_free); } UPDATE_MAX_BLOBSIZE(pIn1); @@ -83655,7 +87701,7 @@ case OP_IntegrityCk: { /* Opcode: RowSetAdd P1 P2 * * * ** Synopsis: rowset(P1)=r[P2] ** -** Insert the integer value held by register P2 into a boolean index +** Insert the integer value held by register P2 into a RowSet object ** held in register P1. ** ** An assertion fails if P2 is not an integer. @@ -83675,8 +87721,9 @@ case OP_RowSetAdd: { /* in1, in2 */ /* Opcode: RowSetRead P1 P2 P3 * * ** Synopsis: r[P3]=rowset(P1) ** -** Extract the smallest value from boolean index P1 and put that value into -** register P3. Or, if boolean index P1 is initially empty, leave P3 +** Extract the smallest value from the RowSet object in P1 +** and put that value into register P3. +** Or, if RowSet object P1 is initially empty, leave P3 ** unchanged and jump to instruction P2. */ case OP_RowSetRead: { /* jump, in1, out3 */ @@ -83707,15 +87754,14 @@ case OP_RowSetRead: { /* jump, in1, out3 */ ** integer in P3 into the RowSet and continue on to the ** next opcode. ** -** The RowSet object is optimized for the case where successive sets -** of integers, where each set contains no duplicates. Each set -** of values is identified by a unique P4 value. The first set -** must have P4==0, the final set P4=-1. P4 must be either -1 or -** non-negative. For non-negative values of P4 only the lower 4 -** bits are significant. +** The RowSet object is optimized for the case where sets of integers +** are inserted in distinct phases, which each set contains no duplicates. +** Each set is identified by a unique P4 value. The first set +** must have P4==0, the final set must have P4==-1, and for all other sets +** must have P4>0. ** ** This allows optimizations: (a) when P4==0 there is no need to test -** the rowset object for P3, as it is guaranteed not to contain it, +** the RowSet object for P3, as it is guaranteed not to contain it, ** (b) when P4==-1 there is no need to insert the value, as it will ** never be tested for, and (c) when a value that is part of set X is ** inserted, there is no need to search to see if the same value was @@ -83822,7 +87868,8 @@ case OP_Program: { /* jump */ if( pProgram->nCsr==0 ) nMem++; nByte = ROUND8(sizeof(VdbeFrame)) + nMem * sizeof(Mem) - + pProgram->nCsr * sizeof(VdbeCursor *); + + pProgram->nCsr * sizeof(VdbeCursor*) + + (pProgram->nOp + 7)/8; pFrame = sqlite3DbMallocZero(db, nByte); if( !pFrame ){ goto no_mem; @@ -83873,6 +87920,8 @@ case OP_Program: { /* jump */ p->nMem = pFrame->nChildMem; p->nCursor = (u16)pFrame->nChildCsr; p->apCsr = (VdbeCursor **)&aMem[p->nMem]; + pFrame->aOnce = (u8*)&p->apCsr[pProgram->nCsr]; + memset(pFrame->aOnce, 0, (pProgram->nOp + 7)/8); p->aOp = aOp = pProgram->aOp; p->nOp = pProgram->nOp; #ifdef SQLITE_ENABLE_STMT_SCANSTATUS @@ -84116,12 +88165,17 @@ case OP_AggStep0: { assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) ); assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem+1 - p->nCursor)+1) ); assert( pOp->p3<pOp->p2 || pOp->p3>=pOp->p2+n ); - pCtx = sqlite3DbMallocRawNN(db, sizeof(*pCtx) + (n-1)*sizeof(sqlite3_value*)); + pCtx = sqlite3DbMallocRawNN(db, n*sizeof(sqlite3_value*) + + (sizeof(pCtx[0]) + sizeof(Mem) - sizeof(sqlite3_value*))); if( pCtx==0 ) goto no_mem; pCtx->pMem = 0; + pCtx->pOut = (Mem*)&(pCtx->argv[n]); + sqlite3VdbeMemInit(pCtx->pOut, db, MEM_Null); pCtx->pFunc = pOp->p4.pFunc; pCtx->iOp = (int)(pOp - aOp); pCtx->pVdbe = p; + pCtx->skipFlag = 0; + pCtx->isError = 0; pCtx->argc = n; pOp->p4type = P4_FUNCCTX; pOp->p4.pCtx = pCtx; @@ -84132,7 +88186,6 @@ case OP_AggStep: { int i; sqlite3_context *pCtx; Mem *pMem; - Mem t; assert( pOp->p4type==P4_FUNCCTX ); pCtx = pOp->p4.pCtx; @@ -84155,26 +88208,28 @@ case OP_AggStep: { #endif pMem->n++; - sqlite3VdbeMemInit(&t, db, MEM_Null); - pCtx->pOut = &t; - pCtx->fErrorOrAux = 0; - pCtx->skipFlag = 0; + assert( pCtx->pOut->flags==MEM_Null ); + assert( pCtx->isError==0 ); + assert( pCtx->skipFlag==0 ); (pCtx->pFunc->xSFunc)(pCtx,pCtx->argc,pCtx->argv); /* IMP: R-24505-23230 */ - if( pCtx->fErrorOrAux ){ - if( pCtx->isError ){ - sqlite3VdbeError(p, "%s", sqlite3_value_text(&t)); + if( pCtx->isError ){ + if( pCtx->isError>0 ){ + sqlite3VdbeError(p, "%s", sqlite3_value_text(pCtx->pOut)); rc = pCtx->isError; } - sqlite3VdbeMemRelease(&t); + if( pCtx->skipFlag ){ + assert( pOp[-1].opcode==OP_CollSeq ); + i = pOp[-1].p1; + if( i ) sqlite3VdbeMemSetInt64(&aMem[i], 1); + pCtx->skipFlag = 0; + } + sqlite3VdbeMemRelease(pCtx->pOut); + pCtx->pOut->flags = MEM_Null; + pCtx->isError = 0; if( rc ) goto abort_due_to_error; - }else{ - assert( t.flags==MEM_Null ); - } - if( pCtx->skipFlag ){ - assert( pOp[-1].opcode==OP_CollSeq ); - i = pOp[-1].p1; - if( i ) sqlite3VdbeMemSetInt64(&aMem[i], 1); } + assert( pCtx->pOut->flags==MEM_Null ); + assert( pCtx->skipFlag==0 ); break; } @@ -84428,7 +88483,7 @@ case OP_Expire: { */ case OP_TableLock: { u8 isWriteLock = (u8)pOp->p3; - if( isWriteLock || 0==(db->flags&SQLITE_ReadUncommitted) ){ + if( isWriteLock || 0==(db->flags&SQLITE_ReadUncommit) ){ int p1 = pOp->p1; assert( p1>=0 && p1<db->nDb ); assert( DbMaskTest(p->btreeMask, p1) ); @@ -84619,12 +88674,18 @@ case OP_VFilter: { /* jump */ #endif /* SQLITE_OMIT_VIRTUALTABLE */ #ifndef SQLITE_OMIT_VIRTUALTABLE -/* Opcode: VColumn P1 P2 P3 * * +/* Opcode: VColumn P1 P2 P3 * P5 ** Synopsis: r[P3]=vcolumn(P2) ** -** Store the value of the P2-th column of -** the row of the virtual-table that the -** P1 cursor is pointing to into register P3. +** Store in register P3 the value of the P2-th column of +** the current row of the virtual-table of cursor P1. +** +** If the VColumn opcode is being used to fetch the value of +** an unchanging column during an UPDATE operation, then the P5 +** value is 1. Otherwise, P5 is 0. The P5 value is returned +** by sqlite3_vtab_nochange() routine and can be used +** by virtual table implementations to return special "no-change" +** marks which can be more efficient, depending on the virtual table. */ case OP_VColumn: { sqlite3_vtab *pVtab; @@ -84646,10 +88707,17 @@ case OP_VColumn: { assert( pModule->xColumn ); memset(&sContext, 0, sizeof(sContext)); sContext.pOut = pDest; - MemSetTypeFlag(pDest, MEM_Null); + if( pOp->p5 ){ + sqlite3VdbeMemSetNull(pDest); + pDest->flags = MEM_Null|MEM_Zero; + pDest->u.nZero = 0; + }else{ + MemSetTypeFlag(pDest, MEM_Null); + } rc = pModule->xColumn(pCur->uc.pVCur, &sContext, pOp->p2); sqlite3VtabImportErrmsg(p, pVtab); - if( sContext.isError ){ + if( sContext.isError>0 ){ + sqlite3VdbeError(p, "%s", sqlite3_value_text(pDest)); rc = sContext.isError; } sqlite3VdbeChangeEncoding(pDest, encoding); @@ -84778,6 +88846,7 @@ case OP_VUpdate: { || pOp->p5==OE_Abort || pOp->p5==OE_Ignore || pOp->p5==OE_Replace ); assert( p->readOnly==0 ); + sqlite3VdbeIncrWriteCounter(p, 0); pVtab = pOp->p4.pVtab->pVtab; if( pVtab==0 || NEVER(pVtab->pModule==0) ){ rc = SQLITE_LOCKED; @@ -84857,8 +88926,131 @@ case OP_MaxPgcnt: { /* out2 */ } #endif +/* Opcode: Function0 P1 P2 P3 P4 P5 +** Synopsis: r[P3]=func(r[P2@P5]) +** +** Invoke a user function (P4 is a pointer to a FuncDef object that +** defines the function) with P5 arguments taken from register P2 and +** successors. The result of the function is stored in register P3. +** Register P3 must not be one of the function inputs. +** +** P1 is a 32-bit bitmask indicating whether or not each argument to the +** function was determined to be constant at compile time. If the first +** argument was constant then bit 0 of P1 is set. This is used to determine +** whether meta data associated with a user function argument using the +** sqlite3_set_auxdata() API may be safely retained until the next +** invocation of this opcode. +** +** See also: Function, AggStep, AggFinal +*/ +/* Opcode: Function P1 P2 P3 P4 P5 +** Synopsis: r[P3]=func(r[P2@P5]) +** +** Invoke a user function (P4 is a pointer to an sqlite3_context object that +** contains a pointer to the function to be run) with P5 arguments taken +** from register P2 and successors. The result of the function is stored +** in register P3. Register P3 must not be one of the function inputs. +** +** P1 is a 32-bit bitmask indicating whether or not each argument to the +** function was determined to be constant at compile time. If the first +** argument was constant then bit 0 of P1 is set. This is used to determine +** whether meta data associated with a user function argument using the +** sqlite3_set_auxdata() API may be safely retained until the next +** invocation of this opcode. +** +** SQL functions are initially coded as OP_Function0 with P4 pointing +** to a FuncDef object. But on first evaluation, the P4 operand is +** automatically converted into an sqlite3_context object and the operation +** changed to this OP_Function opcode. In this way, the initialization of +** the sqlite3_context object occurs only once, rather than once for each +** evaluation of the function. +** +** See also: Function0, AggStep, AggFinal +*/ +case OP_PureFunc0: +case OP_Function0: { + int n; + sqlite3_context *pCtx; + + assert( pOp->p4type==P4_FUNCDEF ); + n = pOp->p5; + assert( pOp->p3>0 && pOp->p3<=(p->nMem+1 - p->nCursor) ); + assert( n==0 || (pOp->p2>0 && pOp->p2+n<=(p->nMem+1 - p->nCursor)+1) ); + assert( pOp->p3<pOp->p2 || pOp->p3>=pOp->p2+n ); + pCtx = sqlite3DbMallocRawNN(db, sizeof(*pCtx) + (n-1)*sizeof(sqlite3_value*)); + if( pCtx==0 ) goto no_mem; + pCtx->pOut = 0; + pCtx->pFunc = pOp->p4.pFunc; + pCtx->iOp = (int)(pOp - aOp); + pCtx->pVdbe = p; + pCtx->isError = 0; + pCtx->argc = n; + pOp->p4type = P4_FUNCCTX; + pOp->p4.pCtx = pCtx; + assert( OP_PureFunc == OP_PureFunc0+2 ); + assert( OP_Function == OP_Function0+2 ); + pOp->opcode += 2; + /* Fall through into OP_Function */ +} +case OP_PureFunc: +case OP_Function: { + int i; + sqlite3_context *pCtx; + + assert( pOp->p4type==P4_FUNCCTX ); + pCtx = pOp->p4.pCtx; + + /* If this function is inside of a trigger, the register array in aMem[] + ** might change from one evaluation to the next. The next block of code + ** checks to see if the register array has changed, and if so it + ** reinitializes the relavant parts of the sqlite3_context object */ + pOut = &aMem[pOp->p3]; + if( pCtx->pOut != pOut ){ + pCtx->pOut = pOut; + for(i=pCtx->argc-1; i>=0; i--) pCtx->argv[i] = &aMem[pOp->p2+i]; + } + + memAboutToChange(p, pOut); +#ifdef SQLITE_DEBUG + for(i=0; i<pCtx->argc; i++){ + assert( memIsValid(pCtx->argv[i]) ); + REGISTER_TRACE(pOp->p2+i, pCtx->argv[i]); + } +#endif + MemSetTypeFlag(pOut, MEM_Null); + assert( pCtx->isError==0 ); + (*pCtx->pFunc->xSFunc)(pCtx, pCtx->argc, pCtx->argv);/* IMP: R-24505-23230 */ + + /* If the function returned an error, throw an exception */ + if( pCtx->isError ){ + if( pCtx->isError>0 ){ + sqlite3VdbeError(p, "%s", sqlite3_value_text(pOut)); + rc = pCtx->isError; + } + sqlite3VdbeDeleteAuxData(db, &p->pAuxData, pCtx->iOp, pOp->p1); + pCtx->isError = 0; + if( rc ) goto abort_due_to_error; + } + + /* Copy the result of the function into register P3 */ + if( pOut->flags & (MEM_Str|MEM_Blob) ){ + sqlite3VdbeChangeEncoding(pOut, encoding); + if( sqlite3VdbeMemTooBig(pOut) ) goto too_big; + } -/* Opcode: Init P1 P2 * P4 * + REGISTER_TRACE(pOp->p3, pOut); + UPDATE_MAX_BLOBSIZE(pOut); + break; +} + +/* Opcode: Trace P1 P2 * P4 * +** +** Write P4 on the statement trace output if statement tracing is +** enabled. +** +** Operand P1 must be 0x7fffffff and P2 must positive. +*/ +/* Opcode: Init P1 P2 P3 P4 * ** Synopsis: Start at P2 ** ** Programs contain a single instance of this opcode as the very first @@ -84872,10 +89064,16 @@ case OP_MaxPgcnt: { /* out2 */ ** ** Increment the value of P1 so that OP_Once opcodes will jump the ** first time they are evaluated for this run. +** +** If P3 is not zero, then it is an address to jump to if an SQLITE_CORRUPT +** error is encountered. */ +case OP_Trace: case OP_Init: { /* jump */ - char *zTrace; int i; +#ifndef SQLITE_OMIT_TRACE + char *zTrace; +#endif /* If the P4 argument is not NULL, then it must be an SQL comment string. ** The "--" string is broken up to prevent false-positives with srcck1.c. @@ -84887,7 +89085,9 @@ case OP_Init: { /* jump */ ** sqlite3_expanded_sql(P) otherwise. */ assert( pOp->p4.z==0 || strncmp(pOp->p4.z, "-" "- ", 3)==0 ); - assert( pOp==p->aOp ); /* Always instruction 0 */ + + /* OP_Init is always instruction 0 */ + assert( pOp==p->aOp || pOp->opcode==OP_Trace ); #ifndef SQLITE_OMIT_TRACE if( (db->mTrace & (SQLITE_TRACE_STMT|SQLITE_TRACE_LEGACY))!=0 @@ -84902,7 +89102,11 @@ case OP_Init: { /* jump */ sqlite3_free(z); }else #endif - { + if( db->nVdbeExec>1 ){ + char *z = sqlite3MPrintf(db, "-- %s", zTrace); + (void)db->xTrace(SQLITE_TRACE_STMT, db->pTraceArg, p, z); + sqlite3DbFree(db, z); + }else{ (void)db->xTrace(SQLITE_TRACE_STMT, db->pTraceArg, p, zTrace); } } @@ -84926,12 +89130,14 @@ case OP_Init: { /* jump */ #endif /* SQLITE_OMIT_TRACE */ assert( pOp->p2>0 ); if( pOp->p1>=sqlite3GlobalConfig.iOnceResetThreshold ){ + if( pOp->opcode==OP_Trace ) break; for(i=1; i<p->nOp; i++){ if( p->aOp[i].opcode==OP_Once ) p->aOp[i].p1 = 0; } pOp->p1 = 0; } pOp->p1++; + p->aCounter[SQLITE_STMTSTATUS_RUN]++; goto jump_to_p2; } @@ -84958,6 +89164,22 @@ case OP_CursorHint: { } #endif /* SQLITE_ENABLE_CURSOR_HINTS */ +#ifdef SQLITE_DEBUG +/* Opcode: Abortable * * * * * +** +** Verify that an Abort can happen. Assert if an Abort at this point +** might cause database corruption. This opcode only appears in debugging +** builds. +** +** An Abort is safe if either there have been no writes, or if there is +** an active statement journal. +*/ +case OP_Abortable: { + sqlite3VdbeAssertAbortable(p); + break; +} +#endif + /* Opcode: Noop * * * * * ** ** Do nothing. This instruction is often useful as a jump @@ -84969,8 +89191,9 @@ case OP_CursorHint: { ** This opcode records information from the optimizer. It is the ** the same as a no-op. This opcodesnever appears in a real VM program. */ -default: { /* This is really OP_Noop and OP_Explain */ +default: { /* This is really OP_Noop, OP_Explain */ assert( pOp->opcode==OP_Noop || pOp->opcode==OP_Explain ); + break; } @@ -84984,7 +89207,7 @@ default: { /* This is really OP_Noop and OP_Explain */ #ifdef VDBE_PROFILE { - u64 endTime = sqlite3Hwtime(); + u64 endTime = sqlite3NProfileCnt ? sqlite3NProfileCnt : sqlite3Hwtime(); if( endTime>start ) pOrigOp->cycles += endTime - start; pOrigOp->cnt++; } @@ -85141,11 +89364,12 @@ static int blobSeekToRow(Incrblob *p, sqlite3_int64 iRow, char **pzErr){ v->aMem[1].u.i = iRow; /* If the statement has been run before (and is paused at the OP_ResultRow) - ** then back it up to the point where it does the OP_SeekRowid. This could + ** then back it up to the point where it does the OP_NotExists. This could ** have been down with an extra OP_Goto, but simply setting the program ** counter is faster. */ - if( v->pc>3 ){ - v->pc = 3; + if( v->pc>4 ){ + v->pc = 4; + assert( v->aOp[v->pc].opcode==OP_NotExists ); rc = sqlite3VdbeExec(v); }else{ rc = sqlite3_step(p->pStmt); @@ -85207,8 +89431,8 @@ SQLITE_API int sqlite3_blob_open( int rc = SQLITE_OK; char *zErr = 0; Table *pTab; - Parse *pParse = 0; Incrblob *pBlob = 0; + Parse sParse; #ifdef SQLITE_ENABLE_API_ARMOR if( ppBlob==0 ){ @@ -85226,37 +89450,34 @@ SQLITE_API int sqlite3_blob_open( sqlite3_mutex_enter(db->mutex); pBlob = (Incrblob *)sqlite3DbMallocZero(db, sizeof(Incrblob)); - if( !pBlob ) goto blob_open_out; - pParse = sqlite3StackAllocRaw(db, sizeof(*pParse)); - if( !pParse ) goto blob_open_out; - do { - memset(pParse, 0, sizeof(Parse)); - pParse->db = db; + memset(&sParse, 0, sizeof(Parse)); + if( !pBlob ) goto blob_open_out; + sParse.db = db; sqlite3DbFree(db, zErr); zErr = 0; sqlite3BtreeEnterAll(db); - pTab = sqlite3LocateTable(pParse, 0, zTable, zDb); + pTab = sqlite3LocateTable(&sParse, 0, zTable, zDb); if( pTab && IsVirtual(pTab) ){ pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open virtual table: %s", zTable); + sqlite3ErrorMsg(&sParse, "cannot open virtual table: %s", zTable); } if( pTab && !HasRowid(pTab) ){ pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open table without rowid: %s", zTable); + sqlite3ErrorMsg(&sParse, "cannot open table without rowid: %s", zTable); } #ifndef SQLITE_OMIT_VIEW if( pTab && pTab->pSelect ){ pTab = 0; - sqlite3ErrorMsg(pParse, "cannot open view: %s", zTable); + sqlite3ErrorMsg(&sParse, "cannot open view: %s", zTable); } #endif if( !pTab ){ - if( pParse->zErrMsg ){ + if( sParse.zErrMsg ){ sqlite3DbFree(db, zErr); - zErr = pParse->zErrMsg; - pParse->zErrMsg = 0; + zErr = sParse.zErrMsg; + sParse.zErrMsg = 0; } rc = SQLITE_ERROR; sqlite3BtreeLeaveAll(db); @@ -85320,7 +89541,7 @@ SQLITE_API int sqlite3_blob_open( } } - pBlob->pStmt = (sqlite3_stmt *)sqlite3VdbeCreate(pParse); + pBlob->pStmt = (sqlite3_stmt *)sqlite3VdbeCreate(&sParse); assert( pBlob->pStmt || db->mallocFailed ); if( pBlob->pStmt ){ @@ -85356,7 +89577,8 @@ SQLITE_API int sqlite3_blob_open( sqlite3VdbeAddOp4Int(v, OP_Transaction, iDb, wrFlag, pTab->pSchema->schema_cookie, pTab->pSchema->iGeneration); - sqlite3VdbeChangeP5(v, 1); + sqlite3VdbeChangeP5(v, 1); + assert( sqlite3VdbeCurrentAddr(v)==2 || db->mallocFailed ); aOp = sqlite3VdbeAddOpList(v, ArraySize(openBlob), openBlob, iLn); /* Make sure a mutex is held on the table to be accessed */ @@ -85371,7 +89593,7 @@ SQLITE_API int sqlite3_blob_open( aOp[0].p1 = iDb; aOp[0].p2 = pTab->tnum; aOp[0].p3 = wrFlag; - sqlite3VdbeChangeP4(v, 1, pTab->zName, P4_TRANSIENT); + sqlite3VdbeChangeP4(v, 2, pTab->zName, P4_TRANSIENT); } if( db->mallocFailed==0 ){ #endif @@ -85393,10 +89615,10 @@ SQLITE_API int sqlite3_blob_open( aOp[1].p4.i = pTab->nCol+1; aOp[3].p2 = pTab->nCol; - pParse->nVar = 0; - pParse->nMem = 1; - pParse->nTab = 1; - sqlite3VdbeMakeReady(v, pParse); + sParse.nVar = 0; + sParse.nMem = 1; + sParse.nTab = 1; + sqlite3VdbeMakeReady(v, &sParse); } } @@ -85418,8 +89640,7 @@ blob_open_out: } sqlite3ErrorWithMsg(db, rc, (zErr ? "%s" : 0), zErr); sqlite3DbFree(db, zErr); - sqlite3ParserReset(pParse); - sqlite3StackFree(db, pParse); + sqlite3ParserReset(&sParse); rc = sqlite3ApiExit(db, rc); sqlite3_mutex_leave(db->mutex); return rc; @@ -86405,15 +90626,15 @@ static int vdbeSorterCompareText( int n2; int res; - getVarint32(&p1[1], n1); n1 = (n1 - 13) / 2; - getVarint32(&p2[1], n2); n2 = (n2 - 13) / 2; - res = memcmp(v1, v2, MIN(n1, n2)); + getVarint32(&p1[1], n1); + getVarint32(&p2[1], n2); + res = memcmp(v1, v2, (MIN(n1, n2) - 13)/2); if( res==0 ){ res = n1 - n2; } if( res==0 ){ - if( pTask->pSorter->pKeyInfo->nField>1 ){ + if( pTask->pSorter->pKeyInfo->nKeyField>1 ){ res = vdbeSorterCompareTail( pTask, pbKey2Cached, pKey1, nKey1, pKey2, nKey2 ); @@ -86448,42 +90669,41 @@ static int vdbeSorterCompareInt( assert( (s1>0 && s1<7) || s1==8 || s1==9 ); assert( (s2>0 && s2<7) || s2==8 || s2==9 ); - if( s1>7 && s2>7 ){ - res = s1 - s2; - }else{ - if( s1==s2 ){ - if( (*v1 ^ *v2) & 0x80 ){ - /* The two values have different signs */ - res = (*v1 & 0x80) ? -1 : +1; - }else{ - /* The two values have the same sign. Compare using memcmp(). */ - static const u8 aLen[] = {0, 1, 2, 3, 4, 6, 8 }; - int i; - res = 0; - for(i=0; i<aLen[s1]; i++){ - if( (res = v1[i] - v2[i]) ) break; + if( s1==s2 ){ + /* The two values have the same sign. Compare using memcmp(). */ + static const u8 aLen[] = {0, 1, 2, 3, 4, 6, 8, 0, 0, 0 }; + const u8 n = aLen[s1]; + int i; + res = 0; + for(i=0; i<n; i++){ + if( (res = v1[i] - v2[i])!=0 ){ + if( ((v1[0] ^ v2[0]) & 0x80)!=0 ){ + res = v1[0] & 0x80 ? -1 : +1; } + break; } + } + }else if( s1>7 && s2>7 ){ + res = s1 - s2; + }else{ + if( s2>7 ){ + res = +1; + }else if( s1>7 ){ + res = -1; }else{ - if( s2>7 ){ - res = +1; - }else if( s1>7 ){ - res = -1; - }else{ - res = s1 - s2; - } - assert( res!=0 ); + res = s1 - s2; + } + assert( res!=0 ); - if( res>0 ){ - if( *v1 & 0x80 ) res = -1; - }else{ - if( *v2 & 0x80 ) res = +1; - } + if( res>0 ){ + if( *v1 & 0x80 ) res = -1; + }else{ + if( *v2 & 0x80 ) res = +1; } } if( res==0 ){ - if( pTask->pSorter->pKeyInfo->nField>1 ){ + if( pTask->pSorter->pKeyInfo->nKeyField>1 ){ res = vdbeSorterCompareTail( pTask, pbKey2Cached, pKey1, nKey1, pKey2, nKey2 ); @@ -86498,7 +90718,7 @@ static int vdbeSorterCompareInt( /* ** Initialize the temporary index cursor just opened as a sorter cursor. ** -** Usually, the sorter module uses the value of (pCsr->pKeyInfo->nField) +** Usually, the sorter module uses the value of (pCsr->pKeyInfo->nKeyField) ** to determine the number of fields that should be compared from the ** records being sorted. However, if the value passed as argument nField ** is non-zero and the sorter is able to guarantee a stable sort, nField @@ -86551,7 +90771,7 @@ SQLITE_PRIVATE int sqlite3VdbeSorterInit( assert( pCsr->pKeyInfo && pCsr->pBtx==0 ); assert( pCsr->eCurType==CURTYPE_SORTER ); - szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nField-1)*sizeof(CollSeq*); + szKeyInfo = sizeof(KeyInfo) + (pCsr->pKeyInfo->nKeyField-1)*sizeof(CollSeq*); sz = sizeof(VdbeSorter) + nWorker * sizeof(SortSubtask); pSorter = (VdbeSorter*)sqlite3DbMallocZero(db, sz + szKeyInfo); @@ -86563,8 +90783,7 @@ SQLITE_PRIVATE int sqlite3VdbeSorterInit( memcpy(pKeyInfo, pCsr->pKeyInfo, szKeyInfo); pKeyInfo->db = 0; if( nField && nWorker==0 ){ - pKeyInfo->nXField += (pKeyInfo->nField - nField); - pKeyInfo->nField = nField; + pKeyInfo->nKeyField = nField; } pSorter->pgsz = pgsz = sqlite3BtreeGetPageSize(db->aDb[0].pBt); pSorter->nTask = nWorker + 1; @@ -86592,11 +90811,9 @@ SQLITE_PRIVATE int sqlite3VdbeSorterInit( mxCache = MIN(mxCache, SQLITE_MAX_PMASZ); pSorter->mxPmaSize = MAX(pSorter->mnPmaSize, (int)mxCache); - /* EVIDENCE-OF: R-26747-61719 When the application provides any amount of - ** scratch memory using SQLITE_CONFIG_SCRATCH, SQLite avoids unnecessary - ** large heap allocations. - */ - if( sqlite3GlobalConfig.pScratch==0 ){ + /* Avoid large memory allocations if the application has requested + ** SQLITE_CONFIG_SMALL_MALLOC. */ + if( sqlite3GlobalConfig.bSmallMalloc==0 ){ assert( pSorter->iMemory==0 ); pSorter->nMemory = pgsz; pSorter->list.aMemory = (u8*)sqlite3Malloc(pgsz); @@ -86604,7 +90821,7 @@ SQLITE_PRIVATE int sqlite3VdbeSorterInit( } } - if( (pKeyInfo->nField+pKeyInfo->nXField)<13 + if( pKeyInfo->nAllField<13 && (pKeyInfo->aColl[0]==0 || pKeyInfo->aColl[0]==db->pDfltColl) ){ pSorter->typeMask = SORTER_TYPE_INTEGER | SORTER_TYPE_TEXT; @@ -86919,7 +91136,7 @@ static int vdbeSortAllocUnpacked(SortSubtask *pTask){ if( pTask->pUnpacked==0 ){ pTask->pUnpacked = sqlite3VdbeAllocUnpackedRecord(pTask->pSorter->pKeyInfo); if( pTask->pUnpacked==0 ) return SQLITE_NOMEM_BKPT; - pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nField; + pTask->pUnpacked->nField = pTask->pSorter->pKeyInfo->nKeyField; pTask->pUnpacked->errCode = 0; } return SQLITE_OK; @@ -88203,9 +92420,13 @@ SQLITE_PRIVATE int sqlite3VdbeSorterRewind(const VdbeCursor *pCsr, int *pbEof){ } /* -** Advance to the next element in the sorter. +** Advance to the next element in the sorter. Return value: +** +** SQLITE_OK success +** SQLITE_DONE end of data +** otherwise some kind of error. */ -SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *db, const VdbeCursor *pCsr, int *pbEof){ +SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *db, const VdbeCursor *pCsr){ VdbeSorter *pSorter; int rc; /* Return code */ @@ -88219,21 +92440,22 @@ SQLITE_PRIVATE int sqlite3VdbeSorterNext(sqlite3 *db, const VdbeCursor *pCsr, in #if SQLITE_MAX_WORKER_THREADS>0 if( pSorter->bUseThreads ){ rc = vdbePmaReaderNext(pSorter->pReader); - *pbEof = (pSorter->pReader->pFd==0); + if( rc==SQLITE_OK && pSorter->pReader->pFd==0 ) rc = SQLITE_DONE; }else #endif /*if( !pSorter->bUseThreads )*/ { + int res = 0; assert( pSorter->pMerger!=0 ); assert( pSorter->pMerger->pTask==(&pSorter->aTask[0]) ); - rc = vdbeMergeEngineStep(pSorter->pMerger, pbEof); + rc = vdbeMergeEngineStep(pSorter->pMerger, &res); + if( rc==SQLITE_OK && res ) rc = SQLITE_DONE; } }else{ SorterRecord *pFree = pSorter->list.pList; pSorter->list.pList = pFree->u.pNext; pFree->u.pNext = 0; if( pSorter->list.aMemory==0 ) vdbeSorterRecordFree(db, pFree); - *pbEof = !pSorter->list.pList; - rc = SQLITE_OK; + rc = pSorter->list.pList ? SQLITE_OK : SQLITE_DONE; } return rc; } @@ -88438,7 +92660,8 @@ static int memjrnlRead( int iChunkOffset; FileChunk *pChunk; -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) if( (iAmt+iOfst)>p->endpoint.iOffset ){ return SQLITE_IOERR_SHORT_READ; } @@ -88557,7 +92780,8 @@ static int memjrnlWrite( ** atomic-write optimization. In this case the first 28 bytes of the ** journal file may be written as part of committing the transaction. */ assert( iOfst==p->endpoint.iOffset || iOfst==0 ); -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) if( iOfst==0 && p->pFirst ){ assert( p->nChunkSize>iAmt ); memcpy((u8*)p->pFirst->zChunk, zBuf, iAmt); @@ -88726,17 +92950,31 @@ SQLITE_PRIVATE void sqlite3MemJournalOpen(sqlite3_file *pJfd){ sqlite3JournalOpen(0, 0, pJfd, 0, -1); } -#ifdef SQLITE_ENABLE_ATOMIC_WRITE +#if defined(SQLITE_ENABLE_ATOMIC_WRITE) \ + || defined(SQLITE_ENABLE_BATCH_ATOMIC_WRITE) /* ** If the argument p points to a MemJournal structure that is not an ** in-memory-only journal file (i.e. is one that was opened with a +ve -** nSpill parameter), and the underlying file has not yet been created, -** create it now. +** nSpill parameter or as SQLITE_OPEN_MAIN_JOURNAL), and the underlying +** file has not yet been created, create it now. */ -SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *p){ +SQLITE_PRIVATE int sqlite3JournalCreate(sqlite3_file *pJfd){ int rc = SQLITE_OK; - if( p->pMethods==&MemJournalMethods && ((MemJournal*)p)->nSpill>0 ){ - rc = memjrnlCreateFile((MemJournal*)p); + MemJournal *p = (MemJournal*)pJfd; + if( p->pMethod==&MemJournalMethods && ( +#ifdef SQLITE_ENABLE_ATOMIC_WRITE + p->nSpill>0 +#else + /* While this appears to not be possible without ATOMIC_WRITE, the + ** paths are complex, so it seems prudent to leave the test in as + ** a NEVER(), in case our analysis is subtly flawed. */ + NEVER(p->nSpill>0) +#endif +#ifdef SQLITE_ENABLE_BATCH_ATOMIC_WRITE + || (p->flags & SQLITE_OPEN_MAIN_JOURNAL) +#endif + )){ + rc = memjrnlCreateFile(p); } return rc; } @@ -88790,11 +93028,11 @@ SQLITE_PRIVATE int sqlite3JournalSize(sqlite3_vfs *pVfs){ ** ** WRC_Continue Continue descending down the tree. ** -** WRC_Prune Do not descend into child nodes. But allow +** WRC_Prune Do not descend into child nodes, but allow ** the walk to continue with sibling nodes. ** ** WRC_Abort Do no more callbacks. Unwind the stack and -** return the top-level walk call. +** return from the top-level walk call. ** ** The return value from this routine is WRC_Abort to abandon the tree walk ** and WRC_Continue to continue. @@ -88803,16 +93041,22 @@ static SQLITE_NOINLINE int walkExpr(Walker *pWalker, Expr *pExpr){ int rc; testcase( ExprHasProperty(pExpr, EP_TokenOnly) ); testcase( ExprHasProperty(pExpr, EP_Reduced) ); - rc = pWalker->xExprCallback(pWalker, pExpr); - if( rc || ExprHasProperty(pExpr,(EP_TokenOnly|EP_Leaf)) ){ - return rc & WRC_Abort; - } - if( pExpr->pLeft && walkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort; - if( pExpr->pRight && walkExpr(pWalker, pExpr->pRight) ) return WRC_Abort; - if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort; - }else if( pExpr->x.pList ){ - if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort; + while(1){ + rc = pWalker->xExprCallback(pWalker, pExpr); + if( rc ) return rc & WRC_Abort; + if( !ExprHasProperty(pExpr,(EP_TokenOnly|EP_Leaf)) ){ + if( pExpr->pLeft && walkExpr(pWalker, pExpr->pLeft) ) return WRC_Abort; + assert( pExpr->x.pList==0 || pExpr->pRight==0 ); + if( pExpr->pRight ){ + pExpr = pExpr->pRight; + continue; + }else if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + if( sqlite3WalkSelect(pWalker, pExpr->x.pSelect) ) return WRC_Abort; + }else if( pExpr->x.pList ){ + if( sqlite3WalkExprList(pWalker, pExpr->x.pList) ) return WRC_Abort; + } + } + break; } return WRC_Continue; } @@ -88848,7 +93092,6 @@ SQLITE_PRIVATE int sqlite3WalkSelectExpr(Walker *pWalker, Select *p){ if( sqlite3WalkExpr(pWalker, p->pHaving) ) return WRC_Abort; if( sqlite3WalkExprList(pWalker, p->pOrderBy) ) return WRC_Abort; if( sqlite3WalkExpr(pWalker, p->pLimit) ) return WRC_Abort; - if( sqlite3WalkExpr(pWalker, p->pOffset) ) return WRC_Abort; return WRC_Continue; } @@ -88865,16 +93108,15 @@ SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker *pWalker, Select *p){ struct SrcList_item *pItem; pSrc = p->pSrc; - if( ALWAYS(pSrc) ){ - for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ - if( sqlite3WalkSelect(pWalker, pItem->pSelect) ){ - return WRC_Abort; - } - if( pItem->fg.isTabFunc - && sqlite3WalkExprList(pWalker, pItem->u1.pFuncArg) - ){ - return WRC_Abort; - } + assert( pSrc!=0 ); + for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ + if( pItem->pSelect && sqlite3WalkSelect(pWalker, pItem->pSelect) ){ + return WRC_Abort; + } + if( pItem->fg.isTabFunc + && sqlite3WalkExprList(pWalker, pItem->u1.pFuncArg) + ){ + return WRC_Abort; } } return WRC_Continue; @@ -88887,8 +93129,9 @@ SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker *pWalker, Select *p){ ** ** If it is not NULL, the xSelectCallback() callback is invoked before ** the walk of the expressions and FROM clause. The xSelectCallback2() -** method, if it is not NULL, is invoked following the walk of the -** expressions and FROM clause. +** method is invoked following the walk of the expressions and FROM clause, +** but only if both xSelectCallback and xSelectCallback2 are both non-NULL +** and if the expressions and FROM clause both return WRC_Continue; ** ** Return WRC_Continue under normal conditions. Return WRC_Abort if ** there is an abort request. @@ -88898,29 +93141,22 @@ SQLITE_PRIVATE int sqlite3WalkSelectFrom(Walker *pWalker, Select *p){ */ SQLITE_PRIVATE int sqlite3WalkSelect(Walker *pWalker, Select *p){ int rc; - if( p==0 || (pWalker->xSelectCallback==0 && pWalker->xSelectCallback2==0) ){ - return WRC_Continue; - } - rc = WRC_Continue; - pWalker->walkerDepth++; - while( p ){ - if( pWalker->xSelectCallback ){ - rc = pWalker->xSelectCallback(pWalker, p); - if( rc ) break; - } + if( p==0 ) return WRC_Continue; + if( pWalker->xSelectCallback==0 ) return WRC_Continue; + do{ + rc = pWalker->xSelectCallback(pWalker, p); + if( rc ) return rc & WRC_Abort; if( sqlite3WalkSelectExpr(pWalker, p) || sqlite3WalkSelectFrom(pWalker, p) ){ - pWalker->walkerDepth--; return WRC_Abort; } if( pWalker->xSelectCallback2 ){ pWalker->xSelectCallback2(pWalker, p); } p = p->pPrior; - } - pWalker->walkerDepth--; - return rc & WRC_Abort; + }while( p!=0 ); + return WRC_Continue; } /************** End of walker.c **********************************************/ @@ -89002,29 +93238,31 @@ static void resolveAlias( assert( pOrig!=0 ); db = pParse->db; pDup = sqlite3ExprDup(db, pOrig, 0); - if( pDup==0 ) return; - if( zType[0]!='G' ) incrAggFunctionDepth(pDup, nSubquery); - if( pExpr->op==TK_COLLATE ){ - pDup = sqlite3ExprAddCollateString(pParse, pDup, pExpr->u.zToken); - } - ExprSetProperty(pDup, EP_Alias); + if( pDup!=0 ){ + if( zType[0]!='G' ) incrAggFunctionDepth(pDup, nSubquery); + if( pExpr->op==TK_COLLATE ){ + pDup = sqlite3ExprAddCollateString(pParse, pDup, pExpr->u.zToken); + } + ExprSetProperty(pDup, EP_Alias); - /* Before calling sqlite3ExprDelete(), set the EP_Static flag. This - ** prevents ExprDelete() from deleting the Expr structure itself, - ** allowing it to be repopulated by the memcpy() on the following line. - ** The pExpr->u.zToken might point into memory that will be freed by the - ** sqlite3DbFree(db, pDup) on the last line of this block, so be sure to - ** make a copy of the token before doing the sqlite3DbFree(). - */ - ExprSetProperty(pExpr, EP_Static); - sqlite3ExprDelete(db, pExpr); - memcpy(pExpr, pDup, sizeof(*pExpr)); - if( !ExprHasProperty(pExpr, EP_IntValue) && pExpr->u.zToken!=0 ){ - assert( (pExpr->flags & (EP_Reduced|EP_TokenOnly))==0 ); - pExpr->u.zToken = sqlite3DbStrDup(db, pExpr->u.zToken); - pExpr->flags |= EP_MemToken; + /* Before calling sqlite3ExprDelete(), set the EP_Static flag. This + ** prevents ExprDelete() from deleting the Expr structure itself, + ** allowing it to be repopulated by the memcpy() on the following line. + ** The pExpr->u.zToken might point into memory that will be freed by the + ** sqlite3DbFree(db, pDup) on the last line of this block, so be sure to + ** make a copy of the token before doing the sqlite3DbFree(). + */ + ExprSetProperty(pExpr, EP_Static); + sqlite3ExprDelete(db, pExpr); + memcpy(pExpr, pDup, sizeof(*pExpr)); + if( !ExprHasProperty(pExpr, EP_IntValue) && pExpr->u.zToken!=0 ){ + assert( (pExpr->flags & (EP_Reduced|EP_TokenOnly))==0 ); + pExpr->u.zToken = sqlite3DbStrDup(db, pExpr->u.zToken); + pExpr->flags |= EP_MemToken; + } + sqlite3DbFree(db, pDup); } - sqlite3DbFree(db, pDup); + ExprSetProperty(pExpr, EP_Alias); } @@ -89118,7 +93356,7 @@ static int lookupName( struct SrcList_item *pMatch = 0; /* The matching pSrcList item */ NameContext *pTopNC = pNC; /* First namecontext in the list */ Schema *pSchema = 0; /* Schema of the expression */ - int isTrigger = 0; /* True if resolved to a trigger column */ + int eNewExprOp = TK_COLUMN; /* New value for pExpr->op on success */ Table *pTab = 0; /* Table hold the row */ Column *pCol; /* A column of pTab */ @@ -89156,7 +93394,8 @@ static int lookupName( } /* Start at the inner-most context and move outward until a match is found */ - while( pNC && cnt==0 ){ + assert( pNC && cnt==0 ); + do{ ExprList *pEList; SrcList *pSrcList = pNC->pSrcList; @@ -89222,22 +93461,35 @@ static int lookupName( } } /* if( pSrcList ) */ -#ifndef SQLITE_OMIT_TRIGGER +#if !defined(SQLITE_OMIT_TRIGGER) || !defined(SQLITE_OMIT_UPSERT) /* If we have not already resolved the name, then maybe - ** it is a new.* or old.* trigger argument reference + ** it is a new.* or old.* trigger argument reference. Or + ** maybe it is an excluded.* from an upsert. */ - if( zDb==0 && zTab!=0 && cntTab==0 && pParse->pTriggerTab!=0 ){ - int op = pParse->eTriggerOp; - assert( op==TK_DELETE || op==TK_UPDATE || op==TK_INSERT ); - if( op!=TK_DELETE && sqlite3StrICmp("new",zTab) == 0 ){ - pExpr->iTable = 1; - pTab = pParse->pTriggerTab; - }else if( op!=TK_INSERT && sqlite3StrICmp("old",zTab)==0 ){ - pExpr->iTable = 0; - pTab = pParse->pTriggerTab; - }else{ - pTab = 0; + if( zDb==0 && zTab!=0 && cntTab==0 ){ + pTab = 0; +#ifndef SQLITE_OMIT_TRIGGER + if( pParse->pTriggerTab!=0 ){ + int op = pParse->eTriggerOp; + assert( op==TK_DELETE || op==TK_UPDATE || op==TK_INSERT ); + if( op!=TK_DELETE && sqlite3StrICmp("new",zTab) == 0 ){ + pExpr->iTable = 1; + pTab = pParse->pTriggerTab; + }else if( op!=TK_INSERT && sqlite3StrICmp("old",zTab)==0 ){ + pExpr->iTable = 0; + pTab = pParse->pTriggerTab; + } + } +#endif /* SQLITE_OMIT_TRIGGER */ +#ifndef SQLITE_OMIT_UPSERT + if( (pNC->ncFlags & NC_UUpsert)!=0 ){ + Upsert *pUpsert = pNC->uNC.pUpsert; + if( pUpsert && sqlite3StrICmp("excluded",zTab)==0 ){ + pTab = pUpsert->pUpsertSrc->a[0].pTab; + pExpr->iTable = 2; + } } +#endif /* SQLITE_OMIT_UPSERT */ if( pTab ){ int iCol; @@ -89257,24 +93509,36 @@ static int lookupName( } if( iCol<pTab->nCol ){ cnt++; - if( iCol<0 ){ - pExpr->affinity = SQLITE_AFF_INTEGER; - }else if( pExpr->iTable==0 ){ - testcase( iCol==31 ); - testcase( iCol==32 ); - pParse->oldmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<<iCol)); - }else{ - testcase( iCol==31 ); - testcase( iCol==32 ); - pParse->newmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<<iCol)); +#ifndef SQLITE_OMIT_UPSERT + if( pExpr->iTable==2 ){ + testcase( iCol==(-1) ); + pExpr->iTable = pNC->uNC.pUpsert->regData + iCol; + eNewExprOp = TK_REGISTER; + ExprSetProperty(pExpr, EP_Alias); + }else +#endif /* SQLITE_OMIT_UPSERT */ + { +#ifndef SQLITE_OMIT_TRIGGER + if( iCol<0 ){ + pExpr->affinity = SQLITE_AFF_INTEGER; + }else if( pExpr->iTable==0 ){ + testcase( iCol==31 ); + testcase( iCol==32 ); + pParse->oldmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<<iCol)); + }else{ + testcase( iCol==31 ); + testcase( iCol==32 ); + pParse->newmask |= (iCol>=32 ? 0xffffffff : (((u32)1)<<iCol)); + } + pExpr->pTab = pTab; + pExpr->iColumn = (i16)iCol; + eNewExprOp = TK_TRIGGER; +#endif /* SQLITE_OMIT_TRIGGER */ } - pExpr->iColumn = (i16)iCol; - pExpr->pTab = pTab; - isTrigger = 1; } } } -#endif /* !defined(SQLITE_OMIT_TRIGGER) */ +#endif /* !defined(SQLITE_OMIT_TRIGGER) || !defined(SQLITE_OMIT_UPSERT) */ /* ** Perhaps the name is a reference to the ROWID @@ -89309,10 +93573,12 @@ static int lookupName( ** is supported for backwards compatibility only. Hence, we issue a warning ** on sqlite3_log() whenever the capability is used. */ - if( (pEList = pNC->pEList)!=0 - && zTab==0 + if( (pNC->ncFlags & NC_UEList)!=0 && cnt==0 + && zTab==0 ){ + pEList = pNC->uNC.pEList; + assert( pEList!=0 ); for(j=0; j<pEList->nExpr; j++){ char *zAs = pEList->a[j].zName; if( zAs!=0 && sqlite3StrICmp(zAs, zCol)==0 ){ @@ -89341,11 +93607,11 @@ static int lookupName( /* Advance to the next name context. The loop will exit when either ** we have a match (cnt>0) or when we run out of name contexts. */ - if( cnt==0 ){ - pNC = pNC->pNext; - nSubquery++; - } - } + if( cnt ) break; + pNC = pNC->pNext; + nSubquery++; + }while( pNC ); + /* ** If X and Y are NULL (in other words if only the column name Z is @@ -89357,10 +93623,16 @@ static int lookupName( ** Because no reference was made to outer contexts, the pNC->nRef ** fields are not changed in any context. */ - if( cnt==0 && zTab==0 && ExprHasProperty(pExpr,EP_DblQuoted) ){ - pExpr->op = TK_STRING; - pExpr->pTab = 0; - return WRC_Prune; + if( cnt==0 && zTab==0 ){ + assert( pExpr->op==TK_ID ); + if( ExprHasProperty(pExpr,EP_DblQuoted) ){ + pExpr->op = TK_STRING; + pExpr->pTab = 0; + return WRC_Prune; + } + if( sqlite3ExprIdToTrueFalse(pExpr) ){ + return WRC_Prune; + } } /* @@ -89403,7 +93675,8 @@ static int lookupName( pExpr->pLeft = 0; sqlite3ExprDelete(db, pExpr->pRight); pExpr->pRight = 0; - pExpr->op = (isTrigger ? TK_TRIGGER : TK_COLUMN); + pExpr->op = eNewExprOp; + ExprSetProperty(pExpr, EP_Leaf); lookupname_end: if( cnt==1 ){ assert( pNC!=0 ); @@ -89442,7 +93715,6 @@ SQLITE_PRIVATE Expr *sqlite3CreateColumnExpr(sqlite3 *db, SrcList *pSrc, int iSr testcase( iCol==BMS-1 ); pItem->colUsed |= ((Bitmask)1)<<(iCol>=BMS ? BMS-1 : iCol); } - ExprSetProperty(p, EP_Resolved); } return p; } @@ -89502,8 +93774,6 @@ static int resolveExprStep(Walker *pWalker, Expr *pExpr){ pParse = pNC->pParse; assert( pParse==pWalker->pParse ); - if( ExprHasProperty(pExpr, EP_Resolved) ) return WRC_Prune; - ExprSetProperty(pExpr, EP_Resolved); #ifndef NDEBUG if( pNC->pSrcList && pNC->pSrcList->nAlloc>0 ){ SrcList *pSrcList = pNC->pSrcList; @@ -89524,7 +93794,8 @@ static int resolveExprStep(Walker *pWalker, Expr *pExpr){ SrcList *pSrcList = pNC->pSrcList; struct SrcList_item *pItem; assert( pSrcList && pSrcList->nSrc==1 ); - pItem = pSrcList->a; + pItem = pSrcList->a; + assert( HasRowid(pItem->pTab) && pItem->pTab->pSelect==0 ); pExpr->op = TK_COLUMN; pExpr->pTab = pItem->pTab; pExpr->iTable = pItem->iCursor; @@ -89535,33 +93806,38 @@ static int resolveExprStep(Walker *pWalker, Expr *pExpr){ #endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) && !defined(SQLITE_OMIT_SUBQUERY) */ - /* A lone identifier is the name of a column. - */ - case TK_ID: { - return lookupName(pParse, 0, 0, pExpr->u.zToken, pNC, pExpr); - } - - /* A table name and column name: ID.ID + /* A column name: ID + ** Or table name and column name: ID.ID ** Or a database, table and column: ID.ID.ID + ** + ** The TK_ID and TK_OUT cases are combined so that there will only + ** be one call to lookupName(). Then the compiler will in-line + ** lookupName() for a size reduction and performance increase. */ + case TK_ID: case TK_DOT: { const char *zColumn; const char *zTable; const char *zDb; Expr *pRight; - /* if( pSrcList==0 ) break; */ - notValid(pParse, pNC, "the \".\" operator", NC_IdxExpr); - pRight = pExpr->pRight; - if( pRight->op==TK_ID ){ + if( pExpr->op==TK_ID ){ zDb = 0; - zTable = pExpr->pLeft->u.zToken; - zColumn = pRight->u.zToken; + zTable = 0; + zColumn = pExpr->u.zToken; }else{ - assert( pRight->op==TK_DOT ); - zDb = pExpr->pLeft->u.zToken; - zTable = pRight->pLeft->u.zToken; - zColumn = pRight->pRight->u.zToken; + notValid(pParse, pNC, "the \".\" operator", NC_IdxExpr); + pRight = pExpr->pRight; + if( pRight->op==TK_ID ){ + zDb = 0; + zTable = pExpr->pLeft->u.zToken; + zColumn = pRight->u.zToken; + }else{ + assert( pRight->op==TK_DOT ); + zDb = pExpr->pLeft->u.zToken; + zTable = pRight->pLeft->u.zToken; + zColumn = pRight->pRight->u.zToken; + } } return lookupName(pParse, zDb, zTable, zColumn, pNC, pExpr); } @@ -89705,15 +93981,30 @@ static int resolveExprStep(Walker *pWalker, Expr *pExpr){ notValid(pParse, pNC, "parameters", NC_IsCheck|NC_PartIdx|NC_IdxExpr); break; } + case TK_IS: + case TK_ISNOT: { + Expr *pRight; + assert( !ExprHasProperty(pExpr, EP_Reduced) ); + /* Handle special cases of "x IS TRUE", "x IS FALSE", "x IS NOT TRUE", + ** and "x IS NOT FALSE". */ + if( (pRight = pExpr->pRight)->op==TK_ID ){ + int rc = resolveExprStep(pWalker, pRight); + if( rc==WRC_Abort ) return WRC_Abort; + if( pRight->op==TK_TRUEFALSE ){ + pExpr->op2 = pExpr->op; + pExpr->op = TK_TRUTH; + return WRC_Continue; + } + } + /* Fall thru */ + } case TK_BETWEEN: case TK_EQ: case TK_NE: case TK_LT: case TK_LE: case TK_GT: - case TK_GE: - case TK_IS: - case TK_ISNOT: { + case TK_GE: { int nLeft, nRight; if( pParse->db->mallocFailed ) break; assert( pExpr->pLeft!=0 ); @@ -89816,8 +94107,8 @@ static int resolveOrderByTermToExprList( memset(&nc, 0, sizeof(nc)); nc.pParse = pParse; nc.pSrcList = pSelect->pSrc; - nc.pEList = pEList; - nc.ncFlags = NC_AllowAgg; + nc.uNC.pEList = pEList; + nc.ncFlags = NC_AllowAgg|NC_UEList; nc.nErr = 0; db = pParse->db; savedSuppErr = db->suppressErr; @@ -89831,7 +94122,7 @@ static int resolveOrderByTermToExprList( ** result-set entry. */ for(i=0; i<pEList->nExpr; i++){ - if( sqlite3ExprCompare(pEList->a[i].pExpr, pE, -1)<2 ){ + if( sqlite3ExprCompare(0, pEList->a[i].pExpr, pE, -1)<2 ){ return i+1; } } @@ -89882,12 +94173,10 @@ static int resolveCompoundOrderBy( pOrderBy = pSelect->pOrderBy; if( pOrderBy==0 ) return 0; db = pParse->db; -#if SQLITE_MAX_COLUMN if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ sqlite3ErrorMsg(pParse, "too many terms in ORDER BY clause"); return 1; } -#endif for(i=0; i<pOrderBy->nExpr; i++){ pOrderBy->a[i].done = 0; } @@ -89979,12 +94268,10 @@ SQLITE_PRIVATE int sqlite3ResolveOrderGroupBy( struct ExprList_item *pItem; if( pOrderBy==0 || pParse->db->mallocFailed ) return 0; -#if SQLITE_MAX_COLUMN if( pOrderBy->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ sqlite3ErrorMsg(pParse, "too many terms in %s BY clause", zType); return 1; } -#endif pEList = pSelect->pEList; assert( pEList!=0 ); /* sqlite3SelectNew() guarantees this */ for(i=0, pItem=pOrderBy->a; i<pOrderBy->nExpr; i++, pItem++){ @@ -90065,7 +94352,7 @@ static int resolveOrderGroupBy( return 1; } for(j=0; j<pSelect->pEList->nExpr; j++){ - if( sqlite3ExprCompare(pE, pSelect->pEList->a[j].pExpr, -1)==0 ){ + if( sqlite3ExprCompare(0, pE, pSelect->pEList->a[j].pExpr, -1)==0 ){ pItem->u.x.iOrderByCol = j+1; } } @@ -90122,8 +94409,7 @@ static int resolveSelectStep(Walker *pWalker, Select *p){ */ memset(&sNC, 0, sizeof(sNC)); sNC.pParse = pParse; - if( sqlite3ResolveExprNames(&sNC, p->pLimit) || - sqlite3ResolveExprNames(&sNC, p->pOffset) ){ + if( sqlite3ResolveExprNames(&sNC, p->pLimit) ){ return WRC_Abort; } @@ -90205,7 +94491,9 @@ static int resolveSelectStep(Walker *pWalker, Select *p){ ** Minor point: If this is the case, then the expression will be ** re-evaluated for each reference to it. */ - sNC.pEList = p->pEList; + assert( (sNC.ncFlags & (NC_UAggInfo|NC_UUpsert))==0 ); + sNC.uNC.pEList = p->pEList; + sNC.ncFlags |= NC_UEList; if( sqlite3ResolveExprNames(&sNC, p->pHaving) ) return WRC_Abort; if( sqlite3ResolveExprNames(&sNC, p->pWhere) ) return WRC_Abort; @@ -90351,37 +94639,29 @@ SQLITE_PRIVATE int sqlite3ResolveExprNames( u16 savedHasAgg; Walker w; - if( pExpr==0 ) return 0; -#if SQLITE_MAX_EXPR_DEPTH>0 - { - Parse *pParse = pNC->pParse; - if( sqlite3ExprCheckHeight(pParse, pExpr->nHeight+pNC->pParse->nHeight) ){ - return 1; - } - pParse->nHeight += pExpr->nHeight; - } -#endif + if( pExpr==0 ) return SQLITE_OK; savedHasAgg = pNC->ncFlags & (NC_HasAgg|NC_MinMaxAgg); pNC->ncFlags &= ~(NC_HasAgg|NC_MinMaxAgg); w.pParse = pNC->pParse; w.xExprCallback = resolveExprStep; w.xSelectCallback = resolveSelectStep; w.xSelectCallback2 = 0; - w.walkerDepth = 0; - w.eCode = 0; w.u.pNC = pNC; +#if SQLITE_MAX_EXPR_DEPTH>0 + w.pParse->nHeight += pExpr->nHeight; + if( sqlite3ExprCheckHeight(w.pParse, w.pParse->nHeight) ){ + return SQLITE_ERROR; + } +#endif sqlite3WalkExpr(&w, pExpr); #if SQLITE_MAX_EXPR_DEPTH>0 - pNC->pParse->nHeight -= pExpr->nHeight; + w.pParse->nHeight -= pExpr->nHeight; #endif - if( pNC->nErr>0 || w.pParse->nErr>0 ){ - ExprSetProperty(pExpr, EP_Error); - } if( pNC->ncFlags & NC_HasAgg ){ ExprSetProperty(pExpr, EP_Agg); } pNC->ncFlags |= savedHasAgg; - return ExprHasProperty(pExpr, EP_Error); + return pNC->nErr>0 || w.pParse->nErr>0; } /* @@ -90422,9 +94702,9 @@ SQLITE_PRIVATE void sqlite3ResolveSelectNames( Walker w; assert( p!=0 ); - memset(&w, 0, sizeof(w)); w.xExprCallback = resolveExprStep; w.xSelectCallback = resolveSelectStep; + w.xSelectCallback2 = 0; w.pParse = pParse; w.u.pNC = pOuterNC; sqlite3WalkSelect(&w, p); @@ -90446,7 +94726,7 @@ SQLITE_PRIVATE void sqlite3ResolveSelfReference( Table *pTab, /* The table being referenced */ int type, /* NC_IsCheck or NC_PartIdx or NC_IdxExpr */ Expr *pExpr, /* Expression to resolve. May be NULL. */ - ExprList *pList /* Expression list to resolve. May be NUL. */ + ExprList *pList /* Expression list to resolve. May be NULL. */ ){ SrcList sSrc; /* Fake SrcList for pParse->pNewTable */ NameContext sNC; /* Name context for pParse->pNewTable */ @@ -90527,7 +94807,7 @@ SQLITE_PRIVATE char sqlite3ExprAffinity(Expr *pExpr){ return sqlite3AffinityType(pExpr->u.zToken, 0); } #endif - if( op==TK_AGG_COLUMN || op==TK_COLUMN ){ + if( (op==TK_AGG_COLUMN || op==TK_COLUMN) && pExpr->pTab ){ return sqlite3TableColumnAffinity(pExpr->pTab, pExpr->iColumn); } if( op==TK_SELECT_COLUMN ){ @@ -90593,6 +94873,11 @@ SQLITE_PRIVATE Expr *sqlite3ExprSkipCollate(Expr *pExpr){ ** Return the collation sequence for the expression pExpr. If ** there is no defined collating sequence, return NULL. ** +** See also: sqlite3ExprNNCollSeq() +** +** The sqlite3ExprNNCollSeq() works the same exact that it returns the +** default collation if pExpr has no defined collation. +** ** The collating sequence might be determined by a COLLATE operator ** or by the presence of a column with a defined collating sequence. ** COLLATE operators take first precedence. Left operands take @@ -90658,6 +94943,32 @@ SQLITE_PRIVATE CollSeq *sqlite3ExprCollSeq(Parse *pParse, Expr *pExpr){ } /* +** Return the collation sequence for the expression pExpr. If +** there is no defined collating sequence, return a pointer to the +** defautl collation sequence. +** +** See also: sqlite3ExprCollSeq() +** +** The sqlite3ExprCollSeq() routine works the same except that it +** returns NULL if there is no defined collation. +*/ +SQLITE_PRIVATE CollSeq *sqlite3ExprNNCollSeq(Parse *pParse, Expr *pExpr){ + CollSeq *p = sqlite3ExprCollSeq(pParse, pExpr); + if( p==0 ) p = pParse->db->pDfltColl; + assert( p!=0 ); + return p; +} + +/* +** Return TRUE if the two expressions have equivalent collating sequences. +*/ +SQLITE_PRIVATE int sqlite3ExprCollSeqMatch(Parse *pParse, Expr *pE1, Expr *pE2){ + CollSeq *pColl1 = sqlite3ExprNNCollSeq(pParse, pE1); + CollSeq *pColl2 = sqlite3ExprNNCollSeq(pParse, pE2); + return sqlite3StrICmp(pColl1->zName, pColl2->zName)==0; +} + +/* ** pExpr is an operand of a comparison operator. aff2 is the ** type affinity of the other operand. This routine returns the ** type affinity that should be used for the comparison operator. @@ -90821,7 +95132,6 @@ SQLITE_PRIVATE int sqlite3ExprVectorSize(Expr *pExpr){ } } -#ifndef SQLITE_OMIT_SUBQUERY /* ** Return a pointer to a subexpression of pVector that is the i-th ** column of the vector (numbered starting with 0). The caller must @@ -90849,9 +95159,7 @@ SQLITE_PRIVATE Expr *sqlite3VectorFieldSubexpr(Expr *pVector, int i){ } return pVector; } -#endif /* !defined(SQLITE_OMIT_SUBQUERY) */ -#ifndef SQLITE_OMIT_SUBQUERY /* ** Compute and return a new Expr object which when passed to ** sqlite3ExprCode() will generate all necessary code to compute @@ -90909,7 +95217,6 @@ SQLITE_PRIVATE Expr *sqlite3ExprForVectorField( } return pRet; } -#endif /* !define(SQLITE_OMIT_SUBQUERY) */ /* ** If expression pExpr is of type TK_SELECT, generate code to evaluate @@ -91100,16 +95407,15 @@ static void heightOfExprList(ExprList *p, int *pnHeight){ } } } -static void heightOfSelect(Select *p, int *pnHeight){ - if( p ){ +static void heightOfSelect(Select *pSelect, int *pnHeight){ + Select *p; + for(p=pSelect; p; p=p->pPrior){ heightOfExpr(p->pWhere, pnHeight); heightOfExpr(p->pHaving, pnHeight); heightOfExpr(p->pLimit, pnHeight); - heightOfExpr(p->pOffset, pnHeight); heightOfExprList(p->pEList, pnHeight); heightOfExprList(p->pGroupBy, pnHeight); heightOfExprList(p->pOrderBy, pnHeight); - heightOfSelect(p->pPrior, pnHeight); } } @@ -91217,7 +95523,7 @@ SQLITE_PRIVATE Expr *sqlite3ExprAlloc( pNew->iAgg = -1; if( pToken ){ if( nExtra==0 ){ - pNew->flags |= EP_IntValue; + pNew->flags |= EP_IntValue|EP_Leaf; pNew->u.iValue = iValue; }else{ pNew->u.zToken = (char*)&pNew[1]; @@ -91248,7 +95554,7 @@ SQLITE_PRIVATE Expr *sqlite3Expr( ){ Token x; x.z = zToken; - x.n = zToken ? sqlite3Strlen30(zToken) : 0; + x.n = sqlite3Strlen30(zToken); return sqlite3ExprAlloc(db, op, &x, 0); } @@ -91394,6 +95700,7 @@ SQLITE_PRIVATE Expr *sqlite3ExprFunction(Parse *pParse, ExprList *pList, Token * return 0; } pNew->x.pList = pList; + ExprSetProperty(pNew, EP_HasFunc); assert( !ExprHasProperty(pNew, EP_xIsSelect) ); sqlite3ExprSetHeightAndFlags(pParse, pNew); return pNew; @@ -91425,7 +95732,7 @@ SQLITE_PRIVATE void sqlite3ExprAssignVarNumber(Parse *pParse, Expr *pExpr, u32 n z = pExpr->u.zToken; assert( z!=0 ); assert( z[0]!=0 ); - assert( n==sqlite3Strlen30(z) ); + assert( n==(u32)sqlite3Strlen30(z) ); if( z[1]==0 ){ /* Wildcard of the form "?". Assign the next variable number */ assert( z[0]=='?' ); @@ -91498,8 +95805,9 @@ static SQLITE_NOINLINE void sqlite3ExprDeleteNN(sqlite3 *db, Expr *p){ /* The Expr.x union is never used at the same time as Expr.pRight */ assert( p->x.pList==0 || p->pRight==0 ); if( p->pLeft && p->op!=TK_SELECT_COLUMN ) sqlite3ExprDeleteNN(db, p->pLeft); - sqlite3ExprDelete(db, p->pRight); - if( ExprHasProperty(p, EP_xIsSelect) ){ + if( p->pRight ){ + sqlite3ExprDeleteNN(db, p->pRight); + }else if( ExprHasProperty(p, EP_xIsSelect) ){ sqlite3SelectDelete(db, p->x.pSelect); }else{ sqlite3ExprListDelete(db, p->x.pList); @@ -91507,7 +95815,7 @@ static SQLITE_NOINLINE void sqlite3ExprDeleteNN(sqlite3 *db, Expr *p){ } if( ExprHasProperty(p, EP_MemToken) ) sqlite3DbFree(db, p->u.zToken); if( !ExprHasProperty(p, EP_Static) ){ - sqlite3DbFree(db, p); + sqlite3DbFreeNN(db, p); } } SQLITE_PRIVATE void sqlite3ExprDelete(sqlite3 *db, Expr *p){ @@ -91774,15 +96082,10 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListDup(sqlite3 *db, ExprList *p, int flags) Expr *pPriorSelectCol = 0; assert( db!=0 ); if( p==0 ) return 0; - pNew = sqlite3DbMallocRawNN(db, sizeof(*pNew) ); + pNew = sqlite3DbMallocRawNN(db, sqlite3DbMallocSize(db, p)); if( pNew==0 ) return 0; - pNew->nExpr = i = p->nExpr; - if( (flags & EXPRDUP_REDUCE)==0 ) for(i=1; i<p->nExpr; i+=i){} - pNew->a = pItem = sqlite3DbMallocRawNN(db, i*sizeof(p->a[0]) ); - if( pItem==0 ){ - sqlite3DbFree(db, pNew); - return 0; - } + pNew->nExpr = p->nExpr; + pItem = pNew->a; pOldItem = p->a; for(i=0; i<p->nExpr; i++, pItem++, pOldItem++){ Expr *pOldExpr = pOldItem->pExpr; @@ -91809,6 +96112,7 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListDup(sqlite3 *db, ExprList *p, int flags) pItem->sortOrder = pOldItem->sortOrder; pItem->done = 0; pItem->bSpanIsTab = pOldItem->bSpanIsTab; + pItem->bSorterRef = pOldItem->bSorterRef; pItem->u = pOldItem->u; } return pNew; @@ -91873,7 +96177,7 @@ SQLITE_PRIVATE IdList *sqlite3IdListDup(sqlite3 *db, IdList *p){ pNew->nId = p->nId; pNew->a = sqlite3DbMallocRawNN(db, p->nId*sizeof(p->a[0]) ); if( pNew->a==0 ){ - sqlite3DbFree(db, pNew); + sqlite3DbFreeNN(db, pNew); return 0; } /* Note that because the size of the allocation for p->a[] is not @@ -91907,7 +96211,6 @@ SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *pDup, int flags){ pNew->pNext = pNext; pNew->pPrior = 0; pNew->pLimit = sqlite3ExprDup(db, p->pLimit, flags); - pNew->pOffset = sqlite3ExprDup(db, p->pOffset, flags); pNew->iLimit = 0; pNew->iOffset = 0; pNew->selFlags = p->selFlags & ~SF_UsesEphemeral; @@ -91935,6 +96238,13 @@ SQLITE_PRIVATE Select *sqlite3SelectDup(sqlite3 *db, Select *p, int flags){ ** Add a new element to the end of an expression list. If pList is ** initially NULL, then create a new expression list. ** +** The pList argument must be either NULL or a pointer to an ExprList +** obtained from a prior call to sqlite3ExprListAppend(). This routine +** may not be used with an ExprList obtained from sqlite3ExprListDup(). +** Reason: This routine assumes that the number of slots in pList->a[] +** is a power of two. That is true for sqlite3ExprListAppend() returns +** but is not necessarily true from the return value of sqlite3ExprListDup(). +** ** If a memory allocation error occurs, the entire list is freed and ** NULL is returned. If non-NULL is returned, then it is guaranteed ** that the new entry was successfully appended. @@ -91944,6 +96254,7 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListAppend( ExprList *pList, /* List to which to append. Might be NULL */ Expr *pExpr /* Expression to be appended. Might be NULL */ ){ + struct ExprList_item *pItem; sqlite3 *db = pParse->db; assert( db!=0 ); if( pList==0 ){ @@ -91952,23 +96263,20 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListAppend( goto no_mem; } pList->nExpr = 0; - pList->a = sqlite3DbMallocRawNN(db, sizeof(pList->a[0])); - if( pList->a==0 ) goto no_mem; }else if( (pList->nExpr & (pList->nExpr-1))==0 ){ - struct ExprList_item *a; - assert( pList->nExpr>0 ); - a = sqlite3DbRealloc(db, pList->a, pList->nExpr*2*sizeof(pList->a[0])); - if( a==0 ){ + ExprList *pNew; + pNew = sqlite3DbRealloc(db, pList, + sizeof(*pList)+(2*pList->nExpr - 1)*sizeof(pList->a[0])); + if( pNew==0 ){ goto no_mem; } - pList->a = a; - } - assert( pList->a!=0 ); - if( 1 ){ - struct ExprList_item *pItem = &pList->a[pList->nExpr++]; - memset(pItem, 0, sizeof(*pItem)); - pItem->pExpr = pExpr; + pList = pNew; } + pItem = &pList->a[pList->nExpr++]; + assert( offsetof(struct ExprList_item,zName)==sizeof(pItem->pExpr) ); + assert( offsetof(struct ExprList_item,pExpr)==0 ); + memset(&pItem->zName,0,sizeof(*pItem)-offsetof(struct ExprList_item,zName)); + pItem->pExpr = pExpr; return pList; no_mem: @@ -92025,20 +96333,19 @@ SQLITE_PRIVATE ExprList *sqlite3ExprListAppendVector( } } - if( pExpr->op==TK_SELECT ){ - if( pList && pList->a[iFirst].pExpr ){ - Expr *pFirst = pList->a[iFirst].pExpr; - assert( pFirst->op==TK_SELECT_COLUMN ); + if( !db->mallocFailed && pExpr->op==TK_SELECT && ALWAYS(pList!=0) ){ + Expr *pFirst = pList->a[iFirst].pExpr; + assert( pFirst!=0 ); + assert( pFirst->op==TK_SELECT_COLUMN ); - /* Store the SELECT statement in pRight so it will be deleted when - ** sqlite3ExprListDelete() is called */ - pFirst->pRight = pExpr; - pExpr = 0; + /* Store the SELECT statement in pRight so it will be deleted when + ** sqlite3ExprListDelete() is called */ + pFirst->pRight = pExpr; + pExpr = 0; - /* Remember the size of the LHS in iTable so that we can check that - ** the RHS and LHS sizes match during code generation. */ - pFirst->iTable = pColumns->nId; - } + /* Remember the size of the LHS in iTable so that we can check that + ** the RHS and LHS sizes match during code generation. */ + pFirst->iTable = pColumns->nId; } vector_append_error: @@ -92097,17 +96404,16 @@ SQLITE_PRIVATE void sqlite3ExprListSetName( SQLITE_PRIVATE void sqlite3ExprListSetSpan( Parse *pParse, /* Parsing context */ ExprList *pList, /* List to which to add the span. */ - ExprSpan *pSpan /* The span to be added */ + const char *zStart, /* Start of the span */ + const char *zEnd /* End of the span */ ){ sqlite3 *db = pParse->db; assert( pList!=0 || db->mallocFailed!=0 ); if( pList ){ struct ExprList_item *pItem = &pList->a[pList->nExpr-1]; assert( pList->nExpr>0 ); - assert( db->mallocFailed || pItem->pExpr==pSpan->pExpr ); sqlite3DbFree(db, pItem->zSpan); - pItem->zSpan = sqlite3DbStrNDup(db, (char*)pSpan->zStart, - (int)(pSpan->zEnd - pSpan->zStart)); + pItem->zSpan = sqlite3DbSpanDup(db, zStart, zEnd); } } @@ -92132,16 +96438,16 @@ SQLITE_PRIVATE void sqlite3ExprListCheckLength( ** Delete an entire expression list. */ static SQLITE_NOINLINE void exprListDeleteNN(sqlite3 *db, ExprList *pList){ - int i; - struct ExprList_item *pItem; - assert( pList->a!=0 || pList->nExpr==0 ); - for(pItem=pList->a, i=0; i<pList->nExpr; i++, pItem++){ + int i = pList->nExpr; + struct ExprList_item *pItem = pList->a; + assert( pList->nExpr>0 ); + do{ sqlite3ExprDelete(db, pItem->pExpr); sqlite3DbFree(db, pItem->zName); sqlite3DbFree(db, pItem->zSpan); - } - sqlite3DbFree(db, pList->a); - sqlite3DbFree(db, pList); + pItem++; + }while( --i>0 ); + sqlite3DbFreeNN(db, pList); } SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3 *db, ExprList *pList){ if( pList ) exprListDeleteNN(db, pList); @@ -92154,17 +96460,57 @@ SQLITE_PRIVATE void sqlite3ExprListDelete(sqlite3 *db, ExprList *pList){ SQLITE_PRIVATE u32 sqlite3ExprListFlags(const ExprList *pList){ int i; u32 m = 0; - if( pList ){ - for(i=0; i<pList->nExpr; i++){ - Expr *pExpr = pList->a[i].pExpr; - assert( pExpr!=0 ); - m |= pExpr->flags; - } + assert( pList!=0 ); + for(i=0; i<pList->nExpr; i++){ + Expr *pExpr = pList->a[i].pExpr; + assert( pExpr!=0 ); + m |= pExpr->flags; } return m; } /* +** This is a SELECT-node callback for the expression walker that +** always "fails". By "fail" in this case, we mean set +** pWalker->eCode to zero and abort. +** +** This callback is used by multiple expression walkers. +*/ +SQLITE_PRIVATE int sqlite3SelectWalkFail(Walker *pWalker, Select *NotUsed){ + UNUSED_PARAMETER(NotUsed); + pWalker->eCode = 0; + return WRC_Abort; +} + +/* +** If the input expression is an ID with the name "true" or "false" +** then convert it into an TK_TRUEFALSE term. Return non-zero if +** the conversion happened, and zero if the expression is unaltered. +*/ +SQLITE_PRIVATE int sqlite3ExprIdToTrueFalse(Expr *pExpr){ + assert( pExpr->op==TK_ID || pExpr->op==TK_STRING ); + if( sqlite3StrICmp(pExpr->u.zToken, "true")==0 + || sqlite3StrICmp(pExpr->u.zToken, "false")==0 + ){ + pExpr->op = TK_TRUEFALSE; + return 1; + } + return 0; +} + +/* +** The argument must be a TK_TRUEFALSE Expr node. Return 1 if it is TRUE +** and 0 if it is FALSE. +*/ +SQLITE_PRIVATE int sqlite3ExprTruthValue(const Expr *pExpr){ + assert( pExpr->op==TK_TRUEFALSE ); + assert( sqlite3StrICmp(pExpr->u.zToken,"true")==0 + || sqlite3StrICmp(pExpr->u.zToken,"false")==0 ); + return pExpr->u.zToken[4]==0; +} + + +/* ** These routines are Walker callbacks used to check expressions to ** see if they are "constant" for some definition of constant. The ** Walker.eCode value determines the type of "constant" we are looking @@ -92211,6 +96557,12 @@ static int exprNodeIsConstant(Walker *pWalker, Expr *pExpr){ return WRC_Abort; } case TK_ID: + /* Convert "true" or "false" in a DEFAULT clause into the + ** appropriate TK_TRUEFALSE operator */ + if( sqlite3ExprIdToTrueFalse(pExpr) ){ + return WRC_Prune; + } + /* Fall thru */ case TK_COLUMN: case TK_AGG_FUNCTION: case TK_AGG_COLUMN: @@ -92220,10 +96572,14 @@ static int exprNodeIsConstant(Walker *pWalker, Expr *pExpr){ testcase( pExpr->op==TK_AGG_COLUMN ); if( pWalker->eCode==3 && pExpr->iTable==pWalker->u.iCur ){ return WRC_Continue; - }else{ - pWalker->eCode = 0; - return WRC_Abort; } + /* Fall through */ + case TK_IF_NULL_ROW: + case TK_REGISTER: + testcase( pExpr->op==TK_REGISTER ); + testcase( pExpr->op==TK_IF_NULL_ROW ); + pWalker->eCode = 0; + return WRC_Abort; case TK_VARIABLE: if( pWalker->eCode==5 ){ /* Silently convert bound parameters that appear inside of CREATE @@ -92238,22 +96594,19 @@ static int exprNodeIsConstant(Walker *pWalker, Expr *pExpr){ } /* Fall through */ default: - testcase( pExpr->op==TK_SELECT ); /* selectNodeIsConstant will disallow */ - testcase( pExpr->op==TK_EXISTS ); /* selectNodeIsConstant will disallow */ + testcase( pExpr->op==TK_SELECT ); /* sqlite3SelectWalkFail() disallows */ + testcase( pExpr->op==TK_EXISTS ); /* sqlite3SelectWalkFail() disallows */ return WRC_Continue; } } -static int selectNodeIsConstant(Walker *pWalker, Select *NotUsed){ - UNUSED_PARAMETER(NotUsed); - pWalker->eCode = 0; - return WRC_Abort; -} static int exprIsConst(Expr *p, int initFlag, int iCur){ Walker w; - memset(&w, 0, sizeof(w)); w.eCode = initFlag; w.xExprCallback = exprNodeIsConstant; - w.xSelectCallback = selectNodeIsConstant; + w.xSelectCallback = sqlite3SelectWalkFail; +#ifdef SQLITE_DEBUG + w.xSelectCallback2 = sqlite3SelectWalkAssert2; +#endif w.u.iCur = iCur; sqlite3WalkExpr(&w, p); return w.eCode; @@ -92291,6 +96644,65 @@ SQLITE_PRIVATE int sqlite3ExprIsTableConstant(Expr *p, int iCur){ return exprIsConst(p, 3, iCur); } + +/* +** sqlite3WalkExpr() callback used by sqlite3ExprIsConstantOrGroupBy(). +*/ +static int exprNodeIsConstantOrGroupBy(Walker *pWalker, Expr *pExpr){ + ExprList *pGroupBy = pWalker->u.pGroupBy; + int i; + + /* Check if pExpr is identical to any GROUP BY term. If so, consider + ** it constant. */ + for(i=0; i<pGroupBy->nExpr; i++){ + Expr *p = pGroupBy->a[i].pExpr; + if( sqlite3ExprCompare(0, pExpr, p, -1)<2 ){ + CollSeq *pColl = sqlite3ExprNNCollSeq(pWalker->pParse, p); + if( sqlite3_stricmp("BINARY", pColl->zName)==0 ){ + return WRC_Prune; + } + } + } + + /* Check if pExpr is a sub-select. If so, consider it variable. */ + if( ExprHasProperty(pExpr, EP_xIsSelect) ){ + pWalker->eCode = 0; + return WRC_Abort; + } + + return exprNodeIsConstant(pWalker, pExpr); +} + +/* +** Walk the expression tree passed as the first argument. Return non-zero +** if the expression consists entirely of constants or copies of terms +** in pGroupBy that sort with the BINARY collation sequence. +** +** This routine is used to determine if a term of the HAVING clause can +** be promoted into the WHERE clause. In order for such a promotion to work, +** the value of the HAVING clause term must be the same for all members of +** a "group". The requirement that the GROUP BY term must be BINARY +** assumes that no other collating sequence will have a finer-grained +** grouping than binary. In other words (A=B COLLATE binary) implies +** A=B in every other collating sequence. The requirement that the +** GROUP BY be BINARY is stricter than necessary. It would also work +** to promote HAVING clauses that use the same alternative collating +** sequence as the GROUP BY term, but that is much harder to check, +** alternative collating sequences are uncommon, and this is only an +** optimization, so we take the easy way out and simply require the +** GROUP BY to use the BINARY collating sequence. +*/ +SQLITE_PRIVATE int sqlite3ExprIsConstantOrGroupBy(Parse *pParse, Expr *p, ExprList *pGroupBy){ + Walker w; + w.eCode = 1; + w.xExprCallback = exprNodeIsConstantOrGroupBy; + w.xSelectCallback = 0; + w.u.pGroupBy = pGroupBy; + w.pParse = pParse; + sqlite3WalkExpr(&w, p); + return w.eCode; +} + /* ** Walk an expression tree. Return non-zero if the expression is constant ** or a function call with constant arguments. Return and 0 if there @@ -92312,10 +96724,12 @@ SQLITE_PRIVATE int sqlite3ExprIsConstantOrFunction(Expr *p, u8 isInit){ */ SQLITE_PRIVATE int sqlite3ExprContainsSubquery(Expr *p){ Walker w; - memset(&w, 0, sizeof(w)); w.eCode = 1; w.xExprCallback = sqlite3ExprWalkNoop; - w.xSelectCallback = selectNodeIsConstant; + w.xSelectCallback = sqlite3SelectWalkFail; +#ifdef SQLITE_DEBUG + w.xSelectCallback2 = sqlite3SelectWalkAssert2; +#endif sqlite3WalkExpr(&w, p); return w.eCode==0; } @@ -92329,6 +96743,7 @@ SQLITE_PRIVATE int sqlite3ExprContainsSubquery(Expr *p){ */ SQLITE_PRIVATE int sqlite3ExprIsInteger(Expr *p, int *pValue){ int rc = 0; + if( p==0 ) return 0; /* Can only happen following on OOM */ /* If an expression is an integer literal that fits in a signed 32-bit ** integer, then the EP_IntValue flag will have already been set */ @@ -92384,8 +96799,8 @@ SQLITE_PRIVATE int sqlite3ExprCanBeNull(const Expr *p){ case TK_BLOB: return 0; case TK_COLUMN: - assert( p->pTab!=0 ); return ExprHasProperty(p, EP_CanBeNull) || + p->pTab==0 || /* Reference to column of index on expression */ (p->iColumn>=0 && p->pTab->aCol[p->iColumn].notNull==0); default: return 1; @@ -92467,7 +96882,6 @@ static Select *isCandidateForInOpt(Expr *pX){ } assert( p->pGroupBy==0 ); /* Has no GROUP BY clause */ if( p->pLimit ) return 0; /* Has no LIMIT clause */ - assert( p->pOffset==0 ); /* No LIMIT means no OFFSET */ if( p->pWhere ) return 0; /* Has no WHERE clause */ pSrc = p->pSrc; assert( pSrc!=0 ); @@ -92557,16 +96971,15 @@ static int sqlite3InRhsIsConstant(Expr *pIn){ ** pX->iTable made to point to the ephemeral table instead of an ** existing table. ** -** The inFlags parameter must contain exactly one of the bits -** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP. If inFlags contains -** IN_INDEX_MEMBERSHIP, then the generated table will be used for a -** fast membership test. When the IN_INDEX_LOOP bit is set, the -** IN index will be used to loop over all values of the RHS of the -** IN operator. +** The inFlags parameter must contain, at a minimum, one of the bits +** IN_INDEX_MEMBERSHIP or IN_INDEX_LOOP but not both. If inFlags contains +** IN_INDEX_MEMBERSHIP, then the generated table will be used for a fast +** membership test. When the IN_INDEX_LOOP bit is set, the IN index will +** be used to loop over all values of the RHS of the IN operator. ** ** When IN_INDEX_LOOP is used (and the b-tree will be used to iterate ** through the set members) then the b-tree must not contain duplicates. -** An epheremal table must be used unless the selected columns are guaranteed +** An epheremal table will be created unless the selected columns are guaranteed ** to be unique - either because it is an INTEGER PRIMARY KEY or due to ** a UNIQUE constraint or index. ** @@ -92746,11 +97159,8 @@ SQLITE_PRIVATE int sqlite3FindInIndex( if( colUsed==(MASKBIT(nExpr)-1) ){ /* If we reach this point, that means the index pIdx is usable */ int iAddr = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); -#ifndef SQLITE_OMIT_EXPLAIN - sqlite3VdbeAddOp4(v, OP_Explain, 0, 0, 0, - sqlite3MPrintf(db, "USING INDEX %s FOR IN-OPERATOR",pIdx->zName), - P4_DYNAMIC); -#endif + ExplainQueryPlan((pParse, 0, + "USING INDEX %s FOR IN-OPERATOR",pIdx->zName)); sqlite3VdbeAddOp3(v, OP_OpenRead, iTab, pIdx->tnum, iDb); sqlite3VdbeSetP4KeyInfo(pParse, pIdx); VdbeComment((v, "%s", pIdx->zName)); @@ -92836,7 +97246,7 @@ static char *exprINAffinity(Parse *pParse, Expr *pExpr){ char *zRet; assert( pExpr->op==TK_IN ); - zRet = sqlite3DbMallocZero(pParse->db, nVal+1); + zRet = sqlite3DbMallocRaw(pParse->db, nVal+1); if( zRet ){ int i; for(i=0; i<nVal; i++){ @@ -92945,17 +97355,6 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( jmpIfDynamic = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); } -#ifndef SQLITE_OMIT_EXPLAIN - if( pParse->explain==2 ){ - char *zMsg = sqlite3MPrintf(pParse->db, "EXECUTE %s%s SUBQUERY %d", - jmpIfDynamic>=0?"":"CORRELATED ", - pExpr->op==TK_IN?"LIST":"SCALAR", - pParse->iNextSelectId - ); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } -#endif - switch( pExpr->op ){ case TK_IN: { int addr; /* Address of OP_OpenEphemeral instruction */ @@ -92993,6 +97392,9 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( Select *pSelect = pExpr->x.pSelect; ExprList *pEList = pSelect->pEList; + ExplainQueryPlan((pParse, 1, "%sLIST SUBQUERY", + jmpIfDynamic>=0?"":"CORRELATED " + )); assert( !isRowid ); /* If the LHS and RHS of the IN operator do not match, that ** error will have been caught long before we reach this point. */ @@ -93001,7 +97403,6 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( int i; sqlite3SelectDestInit(&dest, SRT_Set, pExpr->iTable); dest.zAffSdst = exprINAffinity(pParse, pExpr); - assert( (pExpr->iTable&0x0000FFFF)==pExpr->iTable ); pSelect->iLimit = 0; testcase( pSelect->selFlags & SF_Distinct ); testcase( pKeyInfo==0 ); /* Caused by OOM in sqlite3KeyInfoAlloc() */ @@ -93035,7 +97436,6 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( ExprList *pList = pExpr->x.pList; struct ExprList_item *pItem; int r1, r2, r3; - affinity = sqlite3ExprAffinity(pLeft); if( !affinity ){ affinity = SQLITE_AFF_BLOB; @@ -93048,7 +97448,7 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( /* Loop through each expression in <exprlist>. */ r1 = sqlite3GetTempReg(pParse); r2 = sqlite3GetTempReg(pParse); - if( isRowid ) sqlite3VdbeAddOp2(v, OP_Null, 0, r2); + if( isRowid ) sqlite3VdbeAddOp4(v, OP_Blob, 0, r2, 0, "", P4_STATIC); for(i=pList->nExpr, pItem=pList->a; i>0; i--, pItem++){ Expr *pE2 = pItem->pExpr; int iValToIns; @@ -93108,6 +97508,7 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( Select *pSel; /* SELECT statement to encode */ SelectDest dest; /* How to deal with SELECT result */ int nReg; /* Registers to allocate */ + Expr *pLimit; /* New limit expression */ testcase( pExpr->op==TK_EXISTS ); testcase( pExpr->op==TK_SELECT ); @@ -93115,6 +97516,8 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( assert( ExprHasProperty(pExpr, EP_xIsSelect) ); pSel = pExpr->x.pSelect; + ExplainQueryPlan((pParse, 1, "%sSCALAR SUBQUERY", + jmpIfDynamic>=0?"":"CORRELATED ")); nReg = pExpr->op==TK_SELECT ? pSel->pEList->nExpr : 1; sqlite3SelectDestInit(&dest, 0, pParse->nMem+1); pParse->nMem += nReg; @@ -93129,11 +97532,14 @@ SQLITE_PRIVATE int sqlite3CodeSubselect( sqlite3VdbeAddOp2(v, OP_Integer, 0, dest.iSDParm); VdbeComment((v, "Init EXISTS result")); } - sqlite3ExprDelete(pParse->db, pSel->pLimit); - pSel->pLimit = sqlite3ExprAlloc(pParse->db, TK_INTEGER, - &sqlite3IntTokens[1], 0); + pLimit = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[1], 0); + if( pSel->pLimit ){ + sqlite3ExprDelete(pParse->db, pSel->pLimit->pLeft); + pSel->pLimit->pLeft = pLimit; + }else{ + pSel->pLimit = sqlite3PExpr(pParse, TK_LIMIT, pLimit, 0); + } pSel->iLimit = 0; - pSel->selFlags &= ~SF_MultiValue; if( sqlite3Select(pParse, pSel, &dest) ){ return 0; } @@ -93476,7 +97882,7 @@ static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){ const char *z = pExpr->u.zToken; assert( z!=0 ); c = sqlite3DecOrHexToI64(z, &value); - if( c==1 || (c==2 && !negFlag) || (negFlag && value==SMALLEST_INT64)){ + if( (c==3 && !negFlag) || (c==2) || (negFlag && value==SMALLEST_INT64)){ #ifdef SQLITE_OMIT_FLOATING_POINT sqlite3ErrorMsg(pParse, "oversized integer: %s%s", negFlag ? "-" : "", z); #else @@ -93490,7 +97896,7 @@ static void codeInteger(Parse *pParse, Expr *pExpr, int negFlag, int iMem){ } #endif }else{ - if( negFlag ){ value = c==2 ? SMALLEST_INT64 : -value; } + if( negFlag ){ value = c==3 ? SMALLEST_INT64 : -value; } sqlite3VdbeAddOp4Dup8(v, OP_Int64, 0, iMem, 0, (u8*)&value, P4_INT64); } } @@ -93650,8 +98056,9 @@ SQLITE_PRIVATE void sqlite3ExprCodeLoadIndexColumn( if( iTabCol==XN_EXPR ){ assert( pIdx->aColExpr ); assert( pIdx->aColExpr->nExpr>iIdxCol ); - pParse->iSelfTab = iTabCur; + pParse->iSelfTab = iTabCur + 1; sqlite3ExprCodeCopy(pParse, pIdx->aColExpr->a[iIdxCol].pExpr, regOut); + pParse->iSelfTab = 0; }else{ sqlite3ExprCodeGetColumnOfTable(pParse->pVdbe, pIdx->pTable, iTabCur, iTabCol, regOut); @@ -93668,6 +98075,10 @@ SQLITE_PRIVATE void sqlite3ExprCodeGetColumnOfTable( int iCol, /* Index of the column to extract */ int regOut /* Extract the value into this register */ ){ + if( pTab==0 ){ + sqlite3VdbeAddOp3(v, OP_Column, iTabCur, iCol, regOut); + return; + } if( iCol<0 || iCol==pTab->iPKey ){ sqlite3VdbeAddOp2(v, OP_Rowid, iTabCur, regOut); }else{ @@ -93741,7 +98152,7 @@ SQLITE_PRIVATE void sqlite3ExprCodeGetColumnToReg( SQLITE_PRIVATE void sqlite3ExprCacheClear(Parse *pParse){ int i; -#if SQLITE_DEBUG +#ifdef SQLITE_DEBUG if( pParse->db->flags & SQLITE_VdbeAddopTrace ){ printf("CLEAR\n"); } @@ -93824,7 +98235,11 @@ static int exprCodeVector(Parse *pParse, Expr *p, int *piFreeable){ }else{ *piFreeable = 0; if( p->op==TK_SELECT ){ +#if SQLITE_OMIT_SUBQUERY + iResult = 0; +#else iResult = sqlite3CodeSubselect(pParse, p, 0, 0); +#endif }else{ int i; iResult = pParse->nMem+1; @@ -93865,6 +98280,7 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) return 0; } +expr_code_doover: if( pExpr==0 ){ op = TK_NULL; }else{ @@ -93887,13 +98303,13 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) case TK_COLUMN: { int iTab = pExpr->iTable; if( iTab<0 ){ - if( pParse->ckBase>0 ){ + if( pParse->iSelfTab<0 ){ /* Generating CHECK constraints or inserting into partial index */ - return pExpr->iColumn + pParse->ckBase; + return pExpr->iColumn - pParse->iSelfTab; }else{ /* Coding an expression that is part of an index where column names ** in the index refer to the table to which the index belongs */ - iTab = pParse->iSelfTab; + iTab = pParse->iSelfTab - 1; } } return sqlite3ExprCodeGetColumn(pParse, pExpr->pTab, @@ -93904,6 +98320,10 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) codeInteger(pParse, pExpr, 0, target); return target; } + case TK_TRUEFALSE: { + sqlite3VdbeAddOp2(v, OP_Integer, sqlite3ExprTruthValue(pExpr), target); + return target; + } #ifndef SQLITE_OMIT_FLOATING_POINT case TK_FLOAT: { assert( !ExprHasProperty(pExpr, EP_IntValue) ); @@ -94059,6 +98479,18 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) sqlite3VdbeAddOp2(v, op, r1, inReg); break; } + case TK_TRUTH: { + int isTrue; /* IS TRUE or IS NOT TRUE */ + int bNormal; /* IS TRUE or IS FALSE */ + r1 = sqlite3ExprCodeTemp(pParse, pExpr->pLeft, ®Free1); + testcase( regFree1==0 ); + isTrue = sqlite3ExprTruthValue(pExpr->pRight); + bNormal = pExpr->op2==TK_IS; + testcase( isTrue && bNormal); + testcase( !isTrue && bNormal); + sqlite3VdbeAddOp4Int(v, OP_IsTrue, r1, inReg, !isTrue, isTrue ^ bNormal); + break; + } case TK_ISNULL: case TK_NOTNULL: { int addr; @@ -94230,9 +98662,21 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) if( !pColl ) pColl = db->pDfltColl; sqlite3VdbeAddOp4(v, OP_CollSeq, 0, 0, 0, (char *)pColl, P4_COLLSEQ); } - sqlite3VdbeAddOp4(v, OP_Function0, constMask, r1, target, - (char*)pDef, P4_FUNCDEF); - sqlite3VdbeChangeP5(v, (u8)nFarg); +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC + if( pDef->funcFlags & SQLITE_FUNC_OFFSET ){ + Expr *pArg = pFarg->a[0].pExpr; + if( pArg->op==TK_COLUMN ){ + sqlite3VdbeAddOp3(v, OP_Offset, pArg->iTable, pArg->iColumn, target); + }else{ + sqlite3VdbeAddOp2(v, OP_Null, 0, target); + } + }else +#endif + { + sqlite3VdbeAddOp4(v, pParse->iSelfTab ? OP_PureFunc0 : OP_Function0, + constMask, r1, target, (char*)pDef, P4_FUNCDEF); + sqlite3VdbeChangeP5(v, (u8)nFarg); + } if( nFarg && constMask==0 ){ sqlite3ReleaseTempRange(pParse, r1, nFarg); } @@ -94297,7 +98741,8 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) case TK_SPAN: case TK_COLLATE: case TK_UPLUS: { - return sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); + pExpr = pExpr->pLeft; + goto expr_code_doover; /* 2018-04-28: Prevent deep recursion. OSSFuzz. */ } case TK_TRIGGER: { @@ -94335,10 +98780,9 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) assert( p1>=0 && p1<(pTab->nCol*2+2) ); sqlite3VdbeAddOp2(v, OP_Param, p1, target); - VdbeComment((v, "%s.%s -> $%d", + VdbeComment((v, "r[%d]=%s.%s", target, (pExpr->iTable ? "new" : "old"), - (pExpr->iColumn<0 ? "rowid" : pExpr->pTab->aCol[pExpr->iColumn].zName), - target + (pExpr->iColumn<0 ? "rowid" : pExpr->pTab->aCol[pExpr->iColumn].zName) )); #ifndef SQLITE_OMIT_FLOATING_POINT @@ -94361,6 +98805,17 @@ SQLITE_PRIVATE int sqlite3ExprCodeTarget(Parse *pParse, Expr *pExpr, int target) break; } + case TK_IF_NULL_ROW: { + int addrINR; + addrINR = sqlite3VdbeAddOp1(v, OP_IfNullRow, pExpr->iTable); + sqlite3ExprCachePush(pParse); + inReg = sqlite3ExprCodeTarget(pParse, pExpr->pLeft, target); + sqlite3ExprCachePop(pParse); + sqlite3VdbeJumpHere(v, addrINR); + sqlite3VdbeChangeP3(v, addrINR, inReg); + break; + } + /* ** Form A: ** CASE x WHEN e1 THEN r1 WHEN e2 THEN r2 ... WHEN eN THEN rN ELSE y END @@ -94499,7 +98954,7 @@ SQLITE_PRIVATE int sqlite3ExprCodeAtInit( struct ExprList_item *pItem; int i; for(pItem=p->a, i=p->nExpr; i>0; pItem++, i--){ - if( pItem->reusable && sqlite3ExprCompare(pItem->pExpr,pExpr,-1)==0 ){ + if( pItem->reusable && sqlite3ExprCompare(0,pItem->pExpr,pExpr,-1)==0 ){ return pItem->u.iConstExprReg; } } @@ -94625,7 +99080,9 @@ SQLITE_PRIVATE void sqlite3ExprCodeAndCache(Parse *pParse, Expr *pExpr, int targ ** Generate code that pushes the value of every element of the given ** expression list into a sequence of registers beginning at target. ** -** Return the number of elements evaluated. +** Return the number of elements evaluated. The number returned will +** usually be pList->nExpr but might be reduced if SQLITE_ECEL_OMITREF +** is defined. ** ** The SQLITE_ECEL_DUP flag prevents the arguments from being ** filled using OP_SCopy. OP_Copy must be used instead. @@ -94636,6 +99093,8 @@ SQLITE_PRIVATE void sqlite3ExprCodeAndCache(Parse *pParse, Expr *pExpr, int targ ** The SQLITE_ECEL_REF flag means that expressions in the list with ** ExprList.a[].u.x.iOrderByCol>0 have already been evaluated and stored ** in registers at srcReg, and so the value can be copied from there. +** If SQLITE_ECEL_OMITREF is also set, then the values with u.x.iOrderByCol>0 +** are simply omitted rather than being copied from srcReg. */ SQLITE_PRIVATE int sqlite3ExprCodeExprList( Parse *pParse, /* Parsing context */ @@ -94655,6 +99114,12 @@ SQLITE_PRIVATE int sqlite3ExprCodeExprList( if( !ConstFactorOk(pParse) ) flags &= ~SQLITE_ECEL_FACTOR; for(pItem=pList->a, i=0; i<n; i++, pItem++){ Expr *pExpr = pItem->pExpr; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( pItem->bSorterRef ){ + i--; + n--; + }else +#endif if( (flags & SQLITE_ECEL_REF)!=0 && (j = pItem->u.x.iOrderByCol)>0 ){ if( flags & SQLITE_ECEL_OMITREF ){ i--; @@ -94807,6 +99272,23 @@ SQLITE_PRIVATE void sqlite3ExprIfTrue(Parse *pParse, Expr *pExpr, int dest, int sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, jumpIfNull); break; } + case TK_TRUTH: { + int isNot; /* IS NOT TRUE or IS NOT FALSE */ + int isTrue; /* IS TRUE or IS NOT TRUE */ + testcase( jumpIfNull==0 ); + isNot = pExpr->op2==TK_ISNOT; + isTrue = sqlite3ExprTruthValue(pExpr->pRight); + testcase( isTrue && isNot ); + testcase( !isTrue && isNot ); + if( isTrue ^ isNot ){ + sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, + isNot ? SQLITE_JUMPIFNULL : 0); + }else{ + sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, + isNot ? SQLITE_JUMPIFNULL : 0); + } + break; + } case TK_IS: case TK_ISNOT: testcase( op==TK_IS ); @@ -94961,6 +99443,26 @@ SQLITE_PRIVATE void sqlite3ExprIfFalse(Parse *pParse, Expr *pExpr, int dest, int sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, jumpIfNull); break; } + case TK_TRUTH: { + int isNot; /* IS NOT TRUE or IS NOT FALSE */ + int isTrue; /* IS TRUE or IS NOT TRUE */ + testcase( jumpIfNull==0 ); + isNot = pExpr->op2==TK_ISNOT; + isTrue = sqlite3ExprTruthValue(pExpr->pRight); + testcase( isTrue && isNot ); + testcase( !isTrue && isNot ); + if( isTrue ^ isNot ){ + /* IS TRUE and IS NOT FALSE */ + sqlite3ExprIfFalse(pParse, pExpr->pLeft, dest, + isNot ? 0 : SQLITE_JUMPIFNULL); + + }else{ + /* IS FALSE and IS NOT TRUE */ + sqlite3ExprIfTrue(pParse, pExpr->pLeft, dest, + isNot ? 0 : SQLITE_JUMPIFNULL); + } + break; + } case TK_IS: case TK_ISNOT: testcase( pExpr->op==TK_IS ); @@ -95054,6 +99556,41 @@ SQLITE_PRIVATE void sqlite3ExprIfFalseDup(Parse *pParse, Expr *pExpr, int dest,i sqlite3ExprDelete(db, pCopy); } +/* +** Expression pVar is guaranteed to be an SQL variable. pExpr may be any +** type of expression. +** +** If pExpr is a simple SQL value - an integer, real, string, blob +** or NULL value - then the VDBE currently being prepared is configured +** to re-prepare each time a new value is bound to variable pVar. +** +** Additionally, if pExpr is a simple SQL value and the value is the +** same as that currently bound to variable pVar, non-zero is returned. +** Otherwise, if the values are not the same or if pExpr is not a simple +** SQL value, zero is returned. +*/ +static int exprCompareVariable(Parse *pParse, Expr *pVar, Expr *pExpr){ + int res = 0; + int iVar; + sqlite3_value *pL, *pR = 0; + + sqlite3ValueFromExpr(pParse->db, pExpr, SQLITE_UTF8, SQLITE_AFF_BLOB, &pR); + if( pR ){ + iVar = pVar->iColumn; + sqlite3VdbeSetVarmask(pParse->pVdbe, iVar); + pL = sqlite3VdbeGetBoundValue(pParse->pReprepare, iVar, SQLITE_AFF_BLOB); + if( pL ){ + if( sqlite3_value_type(pL)==SQLITE_TEXT ){ + sqlite3_value_text(pL); /* Make sure the encoding is UTF-8 */ + } + res = 0==sqlite3MemCompare(pL, pR, 0); + } + sqlite3ValueFree(pR); + sqlite3ValueFree(pL); + } + + return res; +} /* ** Do a deep comparison of two expression trees. Return 0 if the two @@ -95076,12 +99613,22 @@ SQLITE_PRIVATE void sqlite3ExprIfFalseDup(Parse *pParse, Expr *pExpr, int dest,i ** this routine is used, it does not hurt to get an extra 2 - that ** just might result in some slightly slower code. But returning ** an incorrect 0 or 1 could lead to a malfunction. +** +** If pParse is not NULL then TK_VARIABLE terms in pA with bindings in +** pParse->pReprepare can be matched against literals in pB. The +** pParse->pVdbe->expmask bitmask is updated for each variable referenced. +** If pParse is NULL (the normal case) then any TK_VARIABLE term in +** Argument pParse should normally be NULL. If it is not NULL and pA or +** pB causes a return value of 2. */ -SQLITE_PRIVATE int sqlite3ExprCompare(Expr *pA, Expr *pB, int iTab){ +SQLITE_PRIVATE int sqlite3ExprCompare(Parse *pParse, Expr *pA, Expr *pB, int iTab){ u32 combinedFlags; if( pA==0 || pB==0 ){ return pB==pA ? 0 : 2; } + if( pParse && pA->op==TK_VARIABLE && exprCompareVariable(pParse, pA, pB) ){ + return 0; + } combinedFlags = pA->flags | pB->flags; if( combinedFlags & EP_IntValue ){ if( (pA->flags&pB->flags&EP_IntValue)!=0 && pA->u.iValue==pB->u.iValue ){ @@ -95090,10 +99637,10 @@ SQLITE_PRIVATE int sqlite3ExprCompare(Expr *pA, Expr *pB, int iTab){ return 2; } if( pA->op!=pB->op ){ - if( pA->op==TK_COLLATE && sqlite3ExprCompare(pA->pLeft, pB, iTab)<2 ){ + if( pA->op==TK_COLLATE && sqlite3ExprCompare(pParse, pA->pLeft,pB,iTab)<2 ){ return 1; } - if( pB->op==TK_COLLATE && sqlite3ExprCompare(pA, pB->pLeft, iTab)<2 ){ + if( pB->op==TK_COLLATE && sqlite3ExprCompare(pParse, pA,pB->pLeft,iTab)<2 ){ return 1; } return 2; @@ -95101,17 +99648,20 @@ SQLITE_PRIVATE int sqlite3ExprCompare(Expr *pA, Expr *pB, int iTab){ if( pA->op!=TK_COLUMN && pA->op!=TK_AGG_COLUMN && pA->u.zToken ){ if( pA->op==TK_FUNCTION ){ if( sqlite3StrICmp(pA->u.zToken,pB->u.zToken)!=0 ) return 2; + }else if( pA->op==TK_COLLATE ){ + if( sqlite3_stricmp(pA->u.zToken,pB->u.zToken)!=0 ) return 2; }else if( strcmp(pA->u.zToken,pB->u.zToken)!=0 ){ - return pA->op==TK_COLLATE ? 1 : 2; + return 2; } } if( (pA->flags & EP_Distinct)!=(pB->flags & EP_Distinct) ) return 2; if( ALWAYS((combinedFlags & EP_TokenOnly)==0) ){ if( combinedFlags & EP_xIsSelect ) return 2; - if( sqlite3ExprCompare(pA->pLeft, pB->pLeft, iTab) ) return 2; - if( sqlite3ExprCompare(pA->pRight, pB->pRight, iTab) ) return 2; + if( sqlite3ExprCompare(pParse, pA->pLeft, pB->pLeft, iTab) ) return 2; + if( sqlite3ExprCompare(pParse, pA->pRight, pB->pRight, iTab) ) return 2; if( sqlite3ExprListCompare(pA->x.pList, pB->x.pList, iTab) ) return 2; - if( ALWAYS((combinedFlags & EP_Reduced)==0) && pA->op!=TK_STRING ){ + assert( (combinedFlags & EP_Reduced)==0 ); + if( pA->op!=TK_STRING && pA->op!=TK_TRUEFALSE ){ if( pA->iColumn!=pB->iColumn ) return 2; if( pA->iTable!=pB->iTable && (pA->iTable!=iTab || NEVER(pB->iTable>=0)) ) return 2; @@ -95144,12 +99694,23 @@ SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList *pA, ExprList *pB, int iTab){ Expr *pExprA = pA->a[i].pExpr; Expr *pExprB = pB->a[i].pExpr; if( pA->a[i].sortOrder!=pB->a[i].sortOrder ) return 1; - if( sqlite3ExprCompare(pExprA, pExprB, iTab) ) return 1; + if( sqlite3ExprCompare(0, pExprA, pExprB, iTab) ) return 1; } return 0; } /* +** Like sqlite3ExprCompare() except COLLATE operators at the top-level +** are ignored. +*/ +SQLITE_PRIVATE int sqlite3ExprCompareSkip(Expr *pA, Expr *pB, int iTab){ + return sqlite3ExprCompare(0, + sqlite3ExprSkipCollate(pA), + sqlite3ExprSkipCollate(pB), + iTab); +} + +/* ** Return true if we can prove the pE2 will always be true if pE1 is ** true. Return false if we cannot complete the proof or if pE2 might ** be false. Examples: @@ -95165,29 +99726,133 @@ SQLITE_PRIVATE int sqlite3ExprListCompare(ExprList *pA, ExprList *pB, int iTab){ ** When comparing TK_COLUMN nodes between pE1 and pE2, if pE2 has ** Expr.iTable<0 then assume a table number given by iTab. ** +** If pParse is not NULL, then the values of bound variables in pE1 are +** compared against literal values in pE2 and pParse->pVdbe->expmask is +** modified to record which bound variables are referenced. If pParse +** is NULL, then false will be returned if pE1 contains any bound variables. +** ** When in doubt, return false. Returning true might give a performance ** improvement. Returning false might cause a performance reduction, but ** it will always give the correct answer and is hence always safe. */ -SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Expr *pE1, Expr *pE2, int iTab){ - if( sqlite3ExprCompare(pE1, pE2, iTab)==0 ){ +SQLITE_PRIVATE int sqlite3ExprImpliesExpr(Parse *pParse, Expr *pE1, Expr *pE2, int iTab){ + if( sqlite3ExprCompare(pParse, pE1, pE2, iTab)==0 ){ return 1; } if( pE2->op==TK_OR - && (sqlite3ExprImpliesExpr(pE1, pE2->pLeft, iTab) - || sqlite3ExprImpliesExpr(pE1, pE2->pRight, iTab) ) + && (sqlite3ExprImpliesExpr(pParse, pE1, pE2->pLeft, iTab) + || sqlite3ExprImpliesExpr(pParse, pE1, pE2->pRight, iTab) ) ){ return 1; } if( pE2->op==TK_NOTNULL && pE1->op!=TK_ISNULL && pE1->op!=TK_IS ){ Expr *pX = sqlite3ExprSkipCollate(pE1->pLeft); testcase( pX!=pE1->pLeft ); - if( sqlite3ExprCompare(pX, pE2->pLeft, iTab)==0 ) return 1; + if( sqlite3ExprCompare(pParse, pX, pE2->pLeft, iTab)==0 ) return 1; } return 0; } /* +** This is the Expr node callback for sqlite3ExprImpliesNotNullRow(). +** If the expression node requires that the table at pWalker->iCur +** have a non-NULL column, then set pWalker->eCode to 1 and abort. +*/ +static int impliesNotNullRow(Walker *pWalker, Expr *pExpr){ + /* This routine is only called for WHERE clause expressions and so it + ** cannot have any TK_AGG_COLUMN entries because those are only found + ** in HAVING clauses. We can get a TK_AGG_FUNCTION in a WHERE clause, + ** but that is an illegal construct and the query will be rejected at + ** a later stage of processing, so the TK_AGG_FUNCTION case does not + ** need to be considered here. */ + assert( pExpr->op!=TK_AGG_COLUMN ); + testcase( pExpr->op==TK_AGG_FUNCTION ); + + if( ExprHasProperty(pExpr, EP_FromJoin) ) return WRC_Prune; + switch( pExpr->op ){ + case TK_ISNOT: + case TK_NOT: + case TK_ISNULL: + case TK_IS: + case TK_OR: + case TK_CASE: + case TK_IN: + case TK_FUNCTION: + testcase( pExpr->op==TK_ISNOT ); + testcase( pExpr->op==TK_NOT ); + testcase( pExpr->op==TK_ISNULL ); + testcase( pExpr->op==TK_IS ); + testcase( pExpr->op==TK_OR ); + testcase( pExpr->op==TK_CASE ); + testcase( pExpr->op==TK_IN ); + testcase( pExpr->op==TK_FUNCTION ); + return WRC_Prune; + case TK_COLUMN: + if( pWalker->u.iCur==pExpr->iTable ){ + pWalker->eCode = 1; + return WRC_Abort; + } + return WRC_Prune; + + /* Virtual tables are allowed to use constraints like x=NULL. So + ** a term of the form x=y does not prove that y is not null if x + ** is the column of a virtual table */ + case TK_EQ: + case TK_NE: + case TK_LT: + case TK_LE: + case TK_GT: + case TK_GE: + testcase( pExpr->op==TK_EQ ); + testcase( pExpr->op==TK_NE ); + testcase( pExpr->op==TK_LT ); + testcase( pExpr->op==TK_LE ); + testcase( pExpr->op==TK_GT ); + testcase( pExpr->op==TK_GE ); + if( (pExpr->pLeft->op==TK_COLUMN && IsVirtual(pExpr->pLeft->pTab)) + || (pExpr->pRight->op==TK_COLUMN && IsVirtual(pExpr->pRight->pTab)) + ){ + return WRC_Prune; + } + default: + return WRC_Continue; + } +} + +/* +** Return true (non-zero) if expression p can only be true if at least +** one column of table iTab is non-null. In other words, return true +** if expression p will always be NULL or false if every column of iTab +** is NULL. +** +** False negatives are acceptable. In other words, it is ok to return +** zero even if expression p will never be true of every column of iTab +** is NULL. A false negative is merely a missed optimization opportunity. +** +** False positives are not allowed, however. A false positive may result +** in an incorrect answer. +** +** Terms of p that are marked with EP_FromJoin (and hence that come from +** the ON or USING clauses of LEFT JOINS) are excluded from the analysis. +** +** This routine is used to check if a LEFT JOIN can be converted into +** an ordinary JOIN. The p argument is the WHERE clause. If the WHERE +** clause requires that some column of the right table of the LEFT JOIN +** be non-NULL, then the LEFT JOIN can be safely converted into an +** ordinary join. +*/ +SQLITE_PRIVATE int sqlite3ExprImpliesNonNullRow(Expr *p, int iTab){ + Walker w; + w.xExprCallback = impliesNotNullRow; + w.xSelectCallback = 0; + w.xSelectCallback2 = 0; + w.eCode = 0; + w.u.iCur = iTab; + sqlite3WalkExpr(&w, p); + return w.eCode; +} + +/* ** An instance of the following structure is used by the tree walker ** to determine if an expression can be evaluated by reference to the ** index only, without having to do a search for the corresponding @@ -95290,8 +99955,8 @@ SQLITE_PRIVATE int sqlite3FunctionUsesThisSrc(Expr *pExpr, SrcList *pSrcList){ Walker w; struct SrcCount cnt; assert( pExpr->op==TK_AGG_FUNCTION ); - memset(&w, 0, sizeof(w)); w.xExprCallback = exprSrcCount; + w.xSelectCallback = 0; w.u.pSrcCount = &cnt; cnt.pSrc = pSrcList; cnt.nThis = 0; @@ -95342,8 +100007,9 @@ static int analyzeAggregate(Walker *pWalker, Expr *pExpr){ NameContext *pNC = pWalker->u.pNC; Parse *pParse = pNC->pParse; SrcList *pSrcList = pNC->pSrcList; - AggInfo *pAggInfo = pNC->pAggInfo; + AggInfo *pAggInfo = pNC->uNC.pAggInfo; + assert( pNC->ncFlags & NC_UAggInfo ); switch( pExpr->op ){ case TK_AGG_COLUMN: case TK_COLUMN: { @@ -95423,7 +100089,7 @@ static int analyzeAggregate(Walker *pWalker, Expr *pExpr){ */ struct AggInfo_func *pItem = pAggInfo->aFunc; for(i=0; i<pAggInfo->nFunc; i++, pItem++){ - if( sqlite3ExprCompare(pItem->pExpr, pExpr, -1)==0 ){ + if( sqlite3ExprCompare(0, pItem->pExpr, pExpr, -1)==0 ){ break; } } @@ -95463,10 +100129,14 @@ static int analyzeAggregate(Walker *pWalker, Expr *pExpr){ return WRC_Continue; } static int analyzeAggregatesInSelect(Walker *pWalker, Select *pSelect){ - UNUSED_PARAMETER(pWalker); UNUSED_PARAMETER(pSelect); + pWalker->walkerDepth++; return WRC_Continue; } +static void analyzeAggregatesInSelectEnd(Walker *pWalker, Select *pSelect){ + UNUSED_PARAMETER(pSelect); + pWalker->walkerDepth--; +} /* ** Analyze the pExpr expression looking for aggregate functions and @@ -95479,9 +100149,10 @@ static int analyzeAggregatesInSelect(Walker *pWalker, Select *pSelect){ */ SQLITE_PRIVATE void sqlite3ExprAnalyzeAggregates(NameContext *pNC, Expr *pExpr){ Walker w; - memset(&w, 0, sizeof(w)); w.xExprCallback = analyzeAggregate; w.xSelectCallback = analyzeAggregatesInSelect; + w.xSelectCallback2 = analyzeAggregatesInSelectEnd; + w.walkerDepth = 0; w.u.pNC = pNC; assert( pNC->pSrcList!=0 ); sqlite3WalkExpr(&w, pExpr); @@ -95582,8 +100253,8 @@ SQLITE_PRIVATE void sqlite3ClearTempRegCache(Parse *pParse){ SQLITE_PRIVATE int sqlite3NoTempsInRange(Parse *pParse, int iFirst, int iLast){ int i; if( pParse->nRangeReg>0 - && pParse->iRangeReg+pParse->nRangeReg<iLast - && pParse->iRangeReg>=iFirst + && pParse->iRangeReg+pParse->nRangeReg > iFirst + && pParse->iRangeReg <= iLast ){ return 0; } @@ -95975,7 +100646,7 @@ static void reloadTableSchema(Parse *pParse, Table *pTab, const char *zName){ ** Or, if zName is not a system table, zero is returned. */ static int isSystemTable(Parse *pParse, const char *zName){ - if( sqlite3Strlen30(zName)>6 && 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ + if( 0==sqlite3StrNICmp(zName, "sqlite_", 7) ){ sqlite3ErrorMsg(pParse, "table %s may not be altered", zName); return 1; } @@ -96003,9 +100674,9 @@ SQLITE_PRIVATE void sqlite3AlterRenameTable( char *zWhere = 0; /* Where clause to locate temp triggers */ #endif VTable *pVTab = 0; /* Non-zero if this is a v-tab with an xRename() */ - int savedDbFlags; /* Saved value of db->flags */ + u32 savedDbFlags; /* Saved value of db->mDbFlags */ - savedDbFlags = db->flags; + savedDbFlags = db->mDbFlags; if( NEVER(db->mallocFailed) ) goto exit_rename_table; assert( pSrc->nSrc==1 ); assert( sqlite3BtreeHoldsAllMutexes(pParse->db) ); @@ -96014,7 +100685,7 @@ SQLITE_PRIVATE void sqlite3AlterRenameTable( if( !pTab ) goto exit_rename_table; iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); zDb = db->aDb[iDb].zDbSName; - db->flags |= SQLITE_PreferBuiltin; + db->mDbFlags |= DBFLAG_PreferBuiltin; /* Get a NULL terminated version of the new table name. */ zName = sqlite3NameFromToken(db, pName); @@ -96179,7 +100850,7 @@ SQLITE_PRIVATE void sqlite3AlterRenameTable( exit_rename_table: sqlite3SrcListDelete(db, pSrc); sqlite3DbFree(db, zName); - db->flags = savedDbFlags; + db->mDbFlags = savedDbFlags; } /* @@ -96280,11 +100951,11 @@ SQLITE_PRIVATE void sqlite3AlterFinishAddColumn(Parse *pParse, Token *pColDef){ zCol = sqlite3DbStrNDup(db, (char*)pColDef->z, pColDef->n); if( zCol ){ char *zEnd = &zCol[pColDef->n-1]; - int savedDbFlags = db->flags; + u32 savedDbFlags = db->mDbFlags; while( zEnd>zCol && (*zEnd==';' || sqlite3Isspace(*zEnd)) ){ *zEnd-- = '\0'; } - db->flags |= SQLITE_PreferBuiltin; + db->mDbFlags |= DBFLAG_PreferBuiltin; sqlite3NestedParse(pParse, "UPDATE \"%w\".%s SET " "sql = substr(sql,1,%d) || ', ' || %Q || substr(sql,%d) " @@ -96293,7 +100964,7 @@ SQLITE_PRIVATE void sqlite3AlterFinishAddColumn(Parse *pParse, Token *pColDef){ zTab ); sqlite3DbFree(db, zCol); - db->flags = savedDbFlags; + db->mDbFlags = savedDbFlags; } /* Make sure the schema version is at least 3. But do not upgrade @@ -96645,6 +101316,10 @@ static void openStatTable( "DELETE FROM %Q.%s WHERE %s=%Q", pDb->zDbSName, zTab, zWhereType, zWhere ); +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + }else if( db->xPreUpdateCallback ){ + sqlite3NestedParse(pParse, "DELETE FROM %Q.%s", pDb->zDbSName, zTab); +#endif }else{ /* The sqlite_stat[134] table already exists. Delete all rows. */ sqlite3VdbeAddOp2(v, OP_Clear, aRoot[i], iDb); @@ -96701,6 +101376,7 @@ struct Stat4Accum { Stat4Sample *aBest; /* Array of nCol best samples */ int iMin; /* Index in a[] of entry with minimum score */ int nSample; /* Current number of samples */ + int nMaxEqZero; /* Max leading 0 in anEq[] for any a[] entry */ int iGet; /* Index of current sample accessed by stat_get() */ Stat4Sample *a; /* Array of mxSample Stat4Sample objects */ sqlite3 *db; /* Database connection, for malloc() */ @@ -96965,6 +101641,13 @@ static void sampleInsert(Stat4Accum *p, Stat4Sample *pNew, int nEqZero){ assert( IsStat4 || nEqZero==0 ); #ifdef SQLITE_ENABLE_STAT4 + /* Stat4Accum.nMaxEqZero is set to the maximum number of leading 0 + ** values in the anEq[] array of any sample in Stat4Accum.a[]. In + ** other words, if nMaxEqZero is n, then it is guaranteed that there + ** are no samples with Stat4Sample.anEq[m]==0 for (m>=n). */ + if( nEqZero>p->nMaxEqZero ){ + p->nMaxEqZero = nEqZero; + } if( pNew->isPSample==0 ){ Stat4Sample *pUpgrade = 0; assert( pNew->anEq[pNew->iCol]>0 ); @@ -97062,12 +101745,22 @@ static void samplePushPrevious(Stat4Accum *p, int iChng){ } } - /* Update the anEq[] fields of any samples already collected. */ + /* Check that no sample contains an anEq[] entry with an index of + ** p->nMaxEqZero or greater set to zero. */ for(i=p->nSample-1; i>=0; i--){ int j; - for(j=iChng; j<p->nCol; j++){ - if( p->a[i].anEq[j]==0 ) p->a[i].anEq[j] = p->current.anEq[j]; + for(j=p->nMaxEqZero; j<p->nCol; j++) assert( p->a[i].anEq[j]>0 ); + } + + /* Update the anEq[] fields of any samples already collected. */ + if( iChng<p->nMaxEqZero ){ + for(i=p->nSample-1; i>=0; i--){ + int j; + for(j=iChng; j<p->nCol; j++){ + if( p->a[i].anEq[j]==0 ) p->a[i].anEq[j] = p->current.anEq[j]; + } } + p->nMaxEqZero = iChng; } #endif @@ -97391,6 +102084,9 @@ static void analyzeOneTable( int regIdxname = iMem++; /* Register containing index name */ int regStat1 = iMem++; /* Value for the stat column of sqlite_stat1 */ int regPrev = iMem; /* MUST BE LAST (see below) */ +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + Table *pStat1 = 0; +#endif pParse->nMem = MAX(pParse->nMem, iMem); v = sqlite3GetVdbe(pParse); @@ -97401,7 +102097,7 @@ static void analyzeOneTable( /* Do not gather statistics on views or virtual tables */ return; } - if( sqlite3_strlike("sqlite_%", pTab->zName, 0)==0 ){ + if( sqlite3_strlike("sqlite\\_%", pTab->zName, '\\')==0 ){ /* Do not gather statistics on system tables */ return; } @@ -97416,6 +102112,18 @@ static void analyzeOneTable( } #endif +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + if( db->xPreUpdateCallback ){ + pStat1 = (Table*)sqlite3DbMallocZero(db, sizeof(Table) + 13); + if( pStat1==0 ) return; + pStat1->zName = (char*)&pStat1[1]; + memcpy(pStat1->zName, "sqlite_stat1", 13); + pStat1->nCol = 3; + pStat1->iPKey = -1; + sqlite3VdbeAddOp4(pParse->pVdbe, OP_Noop, 0, 0, 0,(char*)pStat1,P4_DYNBLOB); + } +#endif + /* Establish a read-lock on the table at the shared-cache level. ** Open a read-only cursor on the table. Also allocate a cursor number ** to use for scanning indexes (iIdxCur). No index cursor is opened at @@ -97597,7 +102305,7 @@ static void analyzeOneTable( regKey = sqlite3GetTempRange(pParse, pPk->nKeyCol); for(j=0; j<pPk->nKeyCol; j++){ k = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[j]); - assert( k>=0 && k<pTab->nCol ); + assert( k>=0 && k<pIdx->nColumn ); sqlite3VdbeAddOp3(v, OP_Column, iIdxCur, k, regKey+j); VdbeComment((v, "%s", pTab->aCol[pPk->aiColumn[j]].zName)); } @@ -97617,6 +102325,9 @@ static void analyzeOneTable( sqlite3VdbeAddOp4(v, OP_MakeRecord, regTabname, 3, regTemp, "BBB", 0); sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid); sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid); +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + sqlite3VdbeChangeP4(v, -1, (char*)pStat1, P4_TABLE); +#endif sqlite3VdbeChangeP5(v, OPFLAG_APPEND); /* Add the entries to the stat3 or stat4 table. */ @@ -97680,6 +102391,9 @@ static void analyzeOneTable( sqlite3VdbeAddOp2(v, OP_NewRowid, iStatCur, regNewRowid); sqlite3VdbeAddOp3(v, OP_Insert, iStatCur, regTemp, regNewRowid); sqlite3VdbeChangeP5(v, OPFLAG_APPEND); +#ifdef SQLITE_ENABLE_PREUPDATE_HOOK + sqlite3VdbeChangeP4(v, -1, (char*)pStat1, P4_TABLE); +#endif sqlite3VdbeJumpHere(v, jZeroRows); } } @@ -97781,27 +102495,14 @@ SQLITE_PRIVATE void sqlite3Analyze(Parse *pParse, Token *pName1, Token *pName2){ if( i==1 ) continue; /* Do not analyze the TEMP database */ analyzeDatabase(pParse, i); } - }else if( pName2->n==0 ){ - /* Form 2: Analyze the database or table named */ - iDb = sqlite3FindDb(db, pName1); - if( iDb>=0 ){ - analyzeDatabase(pParse, iDb); - }else{ - z = sqlite3NameFromToken(db, pName1); - if( z ){ - if( (pIdx = sqlite3FindIndex(db, z, 0))!=0 ){ - analyzeTable(pParse, pIdx->pTable, pIdx); - }else if( (pTab = sqlite3LocateTable(pParse, 0, z, 0))!=0 ){ - analyzeTable(pParse, pTab, 0); - } - sqlite3DbFree(db, z); - } - } + }else if( pName2->n==0 && (iDb = sqlite3FindDb(db, pName1))>=0 ){ + /* Analyze the schema named as the argument */ + analyzeDatabase(pParse, iDb); }else{ - /* Form 3: Analyze the fully qualified table name */ + /* Form 3: Analyze the table or index named as an argument */ iDb = sqlite3TwoPartName(pParse, pName1, pName2, &pTableName); if( iDb>=0 ){ - zDb = db->aDb[iDb].zDbSName; + zDb = pName2->n ? db->aDb[iDb].zDbSName : 0; z = sqlite3NameFromToken(db, pTableName); if( z ){ if( (pIdx = sqlite3FindIndex(db, z, zDb))!=0 ){ @@ -97811,10 +102512,11 @@ SQLITE_PRIVATE void sqlite3Analyze(Parse *pParse, Token *pName1, Token *pName2){ } sqlite3DbFree(db, z); } - } + } + } + if( db->nSqlExec==0 && (v = sqlite3GetVdbe(pParse))!=0 ){ + sqlite3VdbeAddOp0(v, OP_Expire); } - v = sqlite3GetVdbe(pParse); - if( v ) sqlite3VdbeAddOp0(v, OP_Expire); } /* @@ -97943,7 +102645,11 @@ static int analysisLoader(void *pData, int argc, char **argv, char **NotUsed){ #endif pIndex->bUnordered = 0; decodeIntArray((char*)z, nCol, aiRowEst, pIndex->aiRowLogEst, pIndex); - if( pIndex->pPartIdxWhere==0 ) pTable->nRowLogEst = pIndex->aiRowLogEst[0]; + pIndex->hasStat1 = 1; + if( pIndex->pPartIdxWhere==0 ){ + pTable->nRowLogEst = pIndex->aiRowLogEst[0]; + pTable->tabFlags |= TF_HasStat1; + } }else{ Index fakeIdx; fakeIdx.szIdxRow = pTable->szTabRow; @@ -97952,6 +102658,7 @@ static int analysisLoader(void *pData, int argc, char **argv, char **NotUsed){ #endif decodeIntArray((char*)z, 1, 0, &pTable->nRowLogEst, &fakeIdx); pTable->szTabRow = fakeIdx.szIdxRow; + pTable->tabFlags |= TF_HasStat1; } return 0; @@ -98246,15 +102953,20 @@ SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3 *db, int iDb){ HashElem *i; char *zSql; int rc = SQLITE_OK; + Schema *pSchema = db->aDb[iDb].pSchema; assert( iDb>=0 && iDb<db->nDb ); assert( db->aDb[iDb].pBt!=0 ); /* Clear any prior statistics */ assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){ + for(i=sqliteHashFirst(&pSchema->tblHash); i; i=sqliteHashNext(i)){ + Table *pTab = sqliteHashData(i); + pTab->tabFlags &= ~TF_HasStat1; + } + for(i=sqliteHashFirst(&pSchema->idxHash); i; i=sqliteHashNext(i)){ Index *pIdx = sqliteHashData(i); - pIdx->aiRowLogEst[0] = 0; + pIdx->hasStat1 = 0; #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 sqlite3DeleteIndexSamples(db, pIdx); pIdx->aSample = 0; @@ -98277,9 +102989,9 @@ SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3 *db, int iDb){ /* Set appropriate defaults on all indexes not in the sqlite_stat1 table */ assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){ + for(i=sqliteHashFirst(&pSchema->idxHash); i; i=sqliteHashNext(i)){ Index *pIdx = sqliteHashData(i); - if( pIdx->aiRowLogEst[0]==0 ) sqlite3DefaultRowEst(pIdx); + if( !pIdx->hasStat1 ) sqlite3DefaultRowEst(pIdx); } /* Load the statistics from the sqlite_stat4 table. */ @@ -98289,7 +103001,7 @@ SQLITE_PRIVATE int sqlite3AnalysisLoad(sqlite3 *db, int iDb){ rc = loadStat4(db, sInfo.zDatabase); db->lookaside.bDisable--; } - for(i=sqliteHashFirst(&db->aDb[iDb].pSchema->idxHash);i;i=sqliteHashNext(i)){ + for(i=sqliteHashFirst(&pSchema->idxHash); i; i=sqliteHashNext(i)){ Index *pIdx = sqliteHashData(i); sqlite3_free(pIdx->aiRowEst); pIdx->aiRowEst = 0; @@ -98364,6 +103076,10 @@ static int resolveAttachExpr(NameContext *pName, Expr *pExpr) ** ** If the optional "KEY z" syntax is omitted, an SQL NULL is passed as the ** third argument. +** +** If the db->init.reopenMemdb flags is set, then instead of attaching a +** new database, close the database on db->init.iDb and reopen it as an +** empty MemDB. */ static void attachFunc( sqlite3_context *context, @@ -98378,102 +103094,119 @@ static void attachFunc( char *zPath = 0; char *zErr = 0; unsigned int flags; - Db *aNew; + Db *aNew; /* New array of Db pointers */ + Db *pNew; /* Db object for the newly attached database */ char *zErrDyn = 0; sqlite3_vfs *pVfs; UNUSED_PARAMETER(NotUsed); - zFile = (const char *)sqlite3_value_text(argv[0]); zName = (const char *)sqlite3_value_text(argv[1]); if( zFile==0 ) zFile = ""; if( zName==0 ) zName = ""; - /* Check for the following errors: - ** - ** * Too many attached databases, - ** * Transaction currently open - ** * Specified database name already being used. - */ - if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){ - zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d", - db->aLimit[SQLITE_LIMIT_ATTACHED] - ); - goto attach_error; - } - if( !db->autoCommit ){ - zErrDyn = sqlite3MPrintf(db, "cannot ATTACH database within transaction"); - goto attach_error; - } - for(i=0; i<db->nDb; i++){ - char *z = db->aDb[i].zDbSName; - assert( z && zName ); - if( sqlite3StrICmp(z, zName)==0 ){ - zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName); +#ifdef SQLITE_ENABLE_DESERIALIZE +# define REOPEN_AS_MEMDB(db) (db->init.reopenMemdb) +#else +# define REOPEN_AS_MEMDB(db) (0) +#endif + + if( REOPEN_AS_MEMDB(db) ){ + /* This is not a real ATTACH. Instead, this routine is being called + ** from sqlite3_deserialize() to close database db->init.iDb and + ** reopen it as a MemDB */ + pVfs = sqlite3_vfs_find("memdb"); + if( pVfs==0 ) return; + pNew = &db->aDb[db->init.iDb]; + if( pNew->pBt ) sqlite3BtreeClose(pNew->pBt); + pNew->pBt = 0; + pNew->pSchema = 0; + rc = sqlite3BtreeOpen(pVfs, "x", db, &pNew->pBt, 0, SQLITE_OPEN_MAIN_DB); + }else{ + /* This is a real ATTACH + ** + ** Check for the following errors: + ** + ** * Too many attached databases, + ** * Transaction currently open + ** * Specified database name already being used. + */ + if( db->nDb>=db->aLimit[SQLITE_LIMIT_ATTACHED]+2 ){ + zErrDyn = sqlite3MPrintf(db, "too many attached databases - max %d", + db->aLimit[SQLITE_LIMIT_ATTACHED] + ); goto attach_error; } + for(i=0; i<db->nDb; i++){ + char *z = db->aDb[i].zDbSName; + assert( z && zName ); + if( sqlite3StrICmp(z, zName)==0 ){ + zErrDyn = sqlite3MPrintf(db, "database %s is already in use", zName); + goto attach_error; + } + } + + /* Allocate the new entry in the db->aDb[] array and initialize the schema + ** hash tables. + */ + if( db->aDb==db->aDbStatic ){ + aNew = sqlite3DbMallocRawNN(db, sizeof(db->aDb[0])*3 ); + if( aNew==0 ) return; + memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2); + }else{ + aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) ); + if( aNew==0 ) return; + } + db->aDb = aNew; + pNew = &db->aDb[db->nDb]; + memset(pNew, 0, sizeof(*pNew)); + + /* Open the database file. If the btree is successfully opened, use + ** it to obtain the database schema. At this point the schema may + ** or may not be initialized. + */ + flags = db->openFlags; + rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ) sqlite3OomFault(db); + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); + return; + } + assert( pVfs ); + flags |= SQLITE_OPEN_MAIN_DB; + rc = sqlite3BtreeOpen(pVfs, zPath, db, &pNew->pBt, 0, flags); + sqlite3_free( zPath ); + db->nDb++; } - - /* Allocate the new entry in the db->aDb[] array and initialize the schema - ** hash tables. - */ - if( db->aDb==db->aDbStatic ){ - aNew = sqlite3DbMallocRawNN(db, sizeof(db->aDb[0])*3 ); - if( aNew==0 ) return; - memcpy(aNew, db->aDb, sizeof(db->aDb[0])*2); - }else{ - aNew = sqlite3DbRealloc(db, db->aDb, sizeof(db->aDb[0])*(db->nDb+1) ); - if( aNew==0 ) return; - } - db->aDb = aNew; - aNew = &db->aDb[db->nDb]; - memset(aNew, 0, sizeof(*aNew)); - - /* Open the database file. If the btree is successfully opened, use - ** it to obtain the database schema. At this point the schema may - ** or may not be initialized. - */ - flags = db->openFlags; - rc = sqlite3ParseUri(db->pVfs->zName, zFile, &flags, &pVfs, &zPath, &zErr); - if( rc!=SQLITE_OK ){ - if( rc==SQLITE_NOMEM ) sqlite3OomFault(db); - sqlite3_result_error(context, zErr, -1); - sqlite3_free(zErr); - return; - } - assert( pVfs ); - flags |= SQLITE_OPEN_MAIN_DB; - rc = sqlite3BtreeOpen(pVfs, zPath, db, &aNew->pBt, 0, flags); - sqlite3_free( zPath ); - db->nDb++; - db->skipBtreeMutex = 0; + db->noSharedCache = 0; if( rc==SQLITE_CONSTRAINT ){ rc = SQLITE_ERROR; zErrDyn = sqlite3MPrintf(db, "database is already attached"); }else if( rc==SQLITE_OK ){ Pager *pPager; - aNew->pSchema = sqlite3SchemaGet(db, aNew->pBt); - if( !aNew->pSchema ){ + pNew->pSchema = sqlite3SchemaGet(db, pNew->pBt); + if( !pNew->pSchema ){ rc = SQLITE_NOMEM_BKPT; - }else if( aNew->pSchema->file_format && aNew->pSchema->enc!=ENC(db) ){ + }else if( pNew->pSchema->file_format && pNew->pSchema->enc!=ENC(db) ){ zErrDyn = sqlite3MPrintf(db, "attached databases must use the same text encoding as main database"); rc = SQLITE_ERROR; } - sqlite3BtreeEnter(aNew->pBt); - pPager = sqlite3BtreePager(aNew->pBt); + sqlite3BtreeEnter(pNew->pBt); + pPager = sqlite3BtreePager(pNew->pBt); sqlite3PagerLockingMode(pPager, db->dfltLockMode); - sqlite3BtreeSecureDelete(aNew->pBt, + sqlite3BtreeSecureDelete(pNew->pBt, sqlite3BtreeSecureDelete(db->aDb[0].pBt,-1) ); #ifndef SQLITE_OMIT_PAGER_PRAGMAS - sqlite3BtreeSetPagerFlags(aNew->pBt, + sqlite3BtreeSetPagerFlags(pNew->pBt, PAGER_SYNCHRONOUS_FULL | (db->flags & PAGER_FLAGS_MASK)); #endif - sqlite3BtreeLeave(aNew->pBt); + sqlite3BtreeLeave(pNew->pBt); } - aNew->safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1; - aNew->zDbSName = sqlite3DbStrDup(db, zName); - if( rc==SQLITE_OK && aNew->zDbSName==0 ){ + pNew->safety_level = SQLITE_DEFAULT_SYNCHRONOUS+1; + if( !REOPEN_AS_MEMDB(db) ) pNew->zDbSName = sqlite3DbStrDup(db, zName); + if( rc==SQLITE_OK && pNew->zDbSName==0 ){ rc = SQLITE_NOMEM_BKPT; } @@ -98512,13 +103245,16 @@ static void attachFunc( /* If the file was opened successfully, read the schema for the new database. ** If this fails, or if opening the file failed, then close the file and - ** remove the entry from the db->aDb[] array. i.e. put everything back the way - ** we found it. + ** remove the entry from the db->aDb[] array. i.e. put everything back the + ** way we found it. */ if( rc==SQLITE_OK ){ sqlite3BtreeEnterAll(db); + db->init.iDb = 0; + db->mDbFlags &= ~(DBFLAG_SchemaKnownOk); rc = sqlite3Init(db, &zErrDyn); sqlite3BtreeLeaveAll(db); + assert( zErrDyn==0 || rc!=SQLITE_OK ); } #ifdef SQLITE_USER_AUTHENTICATION if( rc==SQLITE_OK ){ @@ -98530,21 +103266,23 @@ static void attachFunc( } #endif if( rc ){ - int iDb = db->nDb - 1; - assert( iDb>=2 ); - if( db->aDb[iDb].pBt ){ - sqlite3BtreeClose(db->aDb[iDb].pBt); - db->aDb[iDb].pBt = 0; - db->aDb[iDb].pSchema = 0; - } - sqlite3ResetAllSchemasOfConnection(db); - db->nDb = iDb; - if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ - sqlite3OomFault(db); - sqlite3DbFree(db, zErrDyn); - zErrDyn = sqlite3MPrintf(db, "out of memory"); - }else if( zErrDyn==0 ){ - zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile); + if( !REOPEN_AS_MEMDB(db) ){ + int iDb = db->nDb - 1; + assert( iDb>=2 ); + if( db->aDb[iDb].pBt ){ + sqlite3BtreeClose(db->aDb[iDb].pBt); + db->aDb[iDb].pBt = 0; + db->aDb[iDb].pSchema = 0; + } + sqlite3ResetAllSchemasOfConnection(db); + db->nDb = iDb; + if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ + sqlite3OomFault(db); + sqlite3DbFree(db, zErrDyn); + zErrDyn = sqlite3MPrintf(db, "out of memory"); + }else if( zErrDyn==0 ){ + zErrDyn = sqlite3MPrintf(db, "unable to open database: %s", zFile); + } } goto attach_error; } @@ -98596,11 +103334,6 @@ static void detachFunc( sqlite3_snprintf(sizeof(zErr),zErr, "cannot detach database %s", zName); goto detach_error; } - if( !db->autoCommit ){ - sqlite3_snprintf(sizeof(zErr), zErr, - "cannot DETACH database within transaction"); - goto detach_error; - } if( sqlite3BtreeIsInReadTrans(pDb->pBt) || sqlite3BtreeIsInBackup(pDb->pBt) ){ sqlite3_snprintf(sizeof(zErr),zErr, "database %s is locked", zName); goto detach_error; @@ -98791,6 +103524,9 @@ SQLITE_PRIVATE int sqlite3FixSrcList( if( sqlite3FixSelect(pFix, pItem->pSelect) ) return 1; if( sqlite3FixExpr(pFix, pItem->pOn) ) return 1; #endif + if( pItem->fg.isTabFunc && sqlite3FixExprList(pFix, pItem->u1.pFuncArg) ){ + return 1; + } } return 0; } @@ -98821,8 +103557,13 @@ SQLITE_PRIVATE int sqlite3FixSelect( if( sqlite3FixExpr(pFix, pSelect->pLimit) ){ return 1; } - if( sqlite3FixExpr(pFix, pSelect->pOffset) ){ - return 1; + if( pSelect->pWith ){ + int i; + for(i=0; i<pSelect->pWith->nCte; i++){ + if( sqlite3FixSelect(pFix, pSelect->pWith->a[i].pSelect) ){ + return 1; + } + } } pSelect = pSelect->pPrior; } @@ -98885,6 +103626,18 @@ SQLITE_PRIVATE int sqlite3FixTriggerStep( if( sqlite3FixExprList(pFix, pStep->pExprList) ){ return 1; } +#ifndef SQLITE_OMIT_UPSERT + if( pStep->pUpsert ){ + Upsert *pUp = pStep->pUpsert; + if( sqlite3FixExprList(pFix, pUp->pUpsertTarget) + || sqlite3FixExpr(pFix, pUp->pUpsertTargetWhere) + || sqlite3FixExprList(pFix, pUp->pUpsertSet) + || sqlite3FixExpr(pFix, pUp->pUpsertWhere) + ){ + return 1; + } + } +#endif pStep = pStep->pNext; } return 0; @@ -99013,11 +103766,9 @@ SQLITE_PRIVATE int sqlite3AuthReadCol( #endif ); if( rc==SQLITE_DENY ){ - if( db->nDb>2 || iDb!=0 ){ - sqlite3ErrorMsg(pParse, "access to %s.%s.%s is prohibited",zDb,zTab,zCol); - }else{ - sqlite3ErrorMsg(pParse, "access to %s.%s is prohibited", zTab, zCol); - } + char *z = sqlite3_mprintf("%s.%s", zTab, zCol); + if( db->nDb>2 || iDb!=0 ) z = sqlite3_mprintf("%s.%z", zDb, z); + sqlite3ErrorMsg(pParse, "access to %z is prohibited", z); pParse->rc = SQLITE_AUTH; }else if( rc!=SQLITE_IGNORE && rc!=SQLITE_OK ){ sqliteAuthBadReturnCode(pParse); @@ -99047,6 +103798,7 @@ SQLITE_PRIVATE void sqlite3AuthRead( int iDb; /* The index of the database the expression refers to */ int iCol; /* Index of column in table */ + assert( pExpr->op==TK_COLUMN || pExpr->op==TK_TRIGGER ); if( db->xAuth==0 ) return; iDb = sqlite3SchemaToIndex(pParse->db, pSchema); if( iDb<0 ){ @@ -99055,7 +103807,6 @@ SQLITE_PRIVATE void sqlite3AuthRead( return; } - assert( pExpr->op==TK_COLUMN || pExpr->op==TK_TRIGGER ); if( pExpr->op==TK_TRIGGER ){ pTab = pParse->pTriggerTab; }else{ @@ -99111,6 +103862,18 @@ SQLITE_PRIVATE int sqlite3AuthCheck( if( db->xAuth==0 ){ return SQLITE_OK; } + + /* EVIDENCE-OF: R-43249-19882 The third through sixth parameters to the + ** callback are either NULL pointers or zero-terminated strings that + ** contain additional details about the action to be authorized. + ** + ** The following testcase() macros show that any of the 3rd through 6th + ** parameters can be either NULL or a string. */ + testcase( zArg1==0 ); + testcase( zArg2==0 ); + testcase( zArg3==0 ); + testcase( pParse->zAuthContext==0 ); + rc = db->xAuth(db->pAuthArg, code, zArg1, zArg2, zArg3, pParse->zAuthContext #ifdef SQLITE_USER_AUTHENTICATION ,db->auth.zAuthUser @@ -99502,24 +104265,27 @@ SQLITE_PRIVATE Table *sqlite3LocateTable( const char *zDbase /* Name of the database. Might be NULL */ ){ Table *p; + sqlite3 *db = pParse->db; /* Read the database schema. If an error occurs, leave an error message ** and code in pParse and return NULL. */ - if( SQLITE_OK!=sqlite3ReadSchema(pParse) ){ + if( (db->mDbFlags & DBFLAG_SchemaKnownOk)==0 + && SQLITE_OK!=sqlite3ReadSchema(pParse) + ){ return 0; } - p = sqlite3FindTable(pParse->db, zName, zDbase); + p = sqlite3FindTable(db, zName, zDbase); if( p==0 ){ const char *zMsg = flags & LOCATE_VIEW ? "no such view" : "no such table"; #ifndef SQLITE_OMIT_VIRTUALTABLE - if( sqlite3FindDbName(pParse->db, zDbase)<1 ){ + if( sqlite3FindDbName(db, zDbase)<1 ){ /* If zName is the not the name of a table in the schema created using ** CREATE, then check to see if it is the name of an virtual table that ** can be an eponymous virtual table. */ - Module *pMod = (Module*)sqlite3HashFind(&pParse->db->aModule, zName); + Module *pMod = (Module*)sqlite3HashFind(&db->aModule, zName); if( pMod==0 && sqlite3_strnicmp(zName, "pragma_", 7)==0 ){ - pMod = sqlite3PragmaVtabRegister(pParse->db, zName); + pMod = sqlite3PragmaVtabRegister(db, zName); } if( pMod && sqlite3VtabEponymousTableInit(pParse, pMod) ){ return pMod->pEpoTab; @@ -99638,7 +104404,7 @@ SQLITE_PRIVATE void sqlite3UnlinkAndDeleteIndex(sqlite3 *db, int iDb, const char } freeIndex(db, pIndex); } - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; } /* @@ -99673,28 +104439,27 @@ SQLITE_PRIVATE void sqlite3CollapseDatabaseArray(sqlite3 *db){ /* ** Reset the schema for the database at index iDb. Also reset the -** TEMP schema. +** TEMP schema. The reset is deferred if db->nSchemaLock is not zero. +** Deferred resets may be run by calling with iDb<0. */ SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3 *db, int iDb){ - Db *pDb; + int i; assert( iDb<db->nDb ); - /* Case 1: Reset the single schema identified by iDb */ - pDb = &db->aDb[iDb]; - assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); - assert( pDb->pSchema!=0 ); - sqlite3SchemaClear(pDb->pSchema); + if( iDb>=0 ){ + assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); + DbSetProperty(db, iDb, DB_ResetWanted); + DbSetProperty(db, 1, DB_ResetWanted); + db->mDbFlags &= ~DBFLAG_SchemaKnownOk; + } - /* If any database other than TEMP is reset, then also reset TEMP - ** since TEMP might be holding triggers that reference tables in the - ** other database. - */ - if( iDb!=1 ){ - pDb = &db->aDb[1]; - assert( pDb->pSchema!=0 ); - sqlite3SchemaClear(pDb->pSchema); + if( db->nSchemaLock==0 ){ + for(i=0; i<db->nDb; i++){ + if( DbHasProperty(db, i, DB_ResetWanted) ){ + sqlite3SchemaClear(db->aDb[i].pSchema); + } + } } - return; } /* @@ -99704,13 +104469,14 @@ SQLITE_PRIVATE void sqlite3ResetOneSchema(sqlite3 *db, int iDb){ SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3 *db){ int i; sqlite3BtreeEnterAll(db); + assert( db->nSchemaLock==0 ); for(i=0; i<db->nDb; i++){ Db *pDb = &db->aDb[i]; if( pDb->pSchema ){ sqlite3SchemaClear(pDb->pSchema); } } - db->flags &= ~SQLITE_InternChanges; + db->mDbFlags &= ~(DBFLAG_SchemaChange|DBFLAG_SchemaKnownOk); sqlite3VtabUnlockList(db); sqlite3BtreeLeaveAll(db); sqlite3CollapseDatabaseArray(db); @@ -99720,7 +104486,7 @@ SQLITE_PRIVATE void sqlite3ResetAllSchemasOfConnection(sqlite3 *db){ ** This routine is called when a commit occurs. */ SQLITE_PRIVATE void sqlite3CommitInternalChanges(sqlite3 *db){ - db->flags &= ~SQLITE_InternChanges; + db->mDbFlags &= ~DBFLAG_SchemaChange; } /* @@ -99758,13 +104524,16 @@ SQLITE_PRIVATE void sqlite3DeleteColumnNames(sqlite3 *db, Table *pTable){ */ static void SQLITE_NOINLINE deleteTable(sqlite3 *db, Table *pTable){ Index *pIndex, *pNext; - TESTONLY( int nLookaside; ) /* Used to verify lookaside not used for schema */ +#ifdef SQLITE_DEBUG /* Record the number of outstanding lookaside allocations in schema Tables ** prior to doing any free() operations. Since schema Tables do not use ** lookaside, this number should not change. */ - TESTONLY( nLookaside = (db && (pTable->tabFlags & TF_Ephemeral)==0) ? - db->lookaside.nOut : 0 ); + int nLookaside = 0; + if( db && (pTable->tabFlags & TF_Ephemeral)==0 ){ + nLookaside = sqlite3LookasideUsed(db, 0); + } +#endif /* Delete all indices associated with this table. */ for(pIndex = pTable->pIndex; pIndex; pIndex=pNext){ @@ -99798,7 +104567,7 @@ static void SQLITE_NOINLINE deleteTable(sqlite3 *db, Table *pTable){ sqlite3DbFree(db, pTable); /* Verify that no lookaside memory was used by schema tables */ - assert( nLookaside==0 || nLookaside==db->lookaside.nOut ); + assert( nLookaside==0 || nLookaside==sqlite3LookasideUsed(db,0) ); } SQLITE_PRIVATE void sqlite3DeleteTable(sqlite3 *db, Table *pTable){ /* Do not delete the table until the reference count reaches zero. */ @@ -99824,7 +104593,7 @@ SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTable(sqlite3 *db, int iDb, const char pDb = &db->aDb[iDb]; p = sqlite3HashInsert(&pDb->pSchema->tblHash, zTabName, 0); sqlite3DeleteTable(db, p); - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; } /* @@ -99937,7 +104706,8 @@ SQLITE_PRIVATE int sqlite3TwoPartName( return -1; } }else{ - assert( db->init.iDb==0 || db->init.busy || (db->flags & SQLITE_Vacuum)!=0); + assert( db->init.iDb==0 || db->init.busy + || (db->mDbFlags & DBFLAG_Vacuum)!=0); iDb = db->init.iDb; *pUnqual = pName1; } @@ -100098,7 +104868,11 @@ SQLITE_PRIVATE void sqlite3StartTable( pTable->iPKey = -1; pTable->pSchema = db->aDb[iDb].pSchema; pTable->nTabRef = 1; +#ifdef SQLITE_DEFAULT_ROWEST + pTable->nRowLogEst = sqlite3LogEst(SQLITE_DEFAULT_ROWEST); +#else pTable->nRowLogEst = 200; assert( 200==sqlite3LogEst(1048576) ); +#endif assert( pParse->pNewTable==0 ); pParse->pNewTable = pTable; @@ -100165,7 +104939,8 @@ SQLITE_PRIVATE void sqlite3StartTable( }else #endif { - pParse->addrCrTab = sqlite3VdbeAddOp2(v, OP_CreateTable, iDb, reg2); + pParse->addrCrTab = + sqlite3VdbeAddOp3(v, OP_CreateBtree, iDb, reg2, BTREE_INTKEY); } sqlite3OpenMasterTable(pParse, iDb); sqlite3VdbeAddOp2(v, OP_NewRowid, 0, reg1); @@ -100214,12 +104989,10 @@ SQLITE_PRIVATE void sqlite3AddColumn(Parse *pParse, Token *pName, Token *pType){ Column *pCol; sqlite3 *db = pParse->db; if( (p = pParse->pNewTable)==0 ) return; -#if SQLITE_MAX_COLUMN if( p->nCol+1>db->aLimit[SQLITE_LIMIT_COLUMN] ){ sqlite3ErrorMsg(pParse, "too many columns on %s", p->zName); return; } -#endif z = sqlite3DbMallocRaw(db, pName->n + pType->n + 2); if( z==0 ) return; memcpy(z, pName->z, pName->n); @@ -100248,15 +105021,20 @@ SQLITE_PRIVATE void sqlite3AddColumn(Parse *pParse, Token *pName, Token *pType){ if( pType->n==0 ){ /* If there is no type specified, columns have the default affinity - ** 'BLOB'. */ + ** 'BLOB' with a default size of 4 bytes. */ pCol->affinity = SQLITE_AFF_BLOB; pCol->szEst = 1; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( 4>=sqlite3GlobalConfig.szSorterRef ){ + pCol->colFlags |= COLFLAG_SORTERREF; + } +#endif }else{ zType = z + sqlite3Strlen30(z) + 1; memcpy(zType, pType->z, pType->n); zType[pType->n] = 0; sqlite3Dequote(zType); - pCol->affinity = sqlite3AffinityType(zType, &pCol->szEst); + pCol->affinity = sqlite3AffinityType(zType, pCol); pCol->colFlags |= COLFLAG_HASTYPE; } p->nCol++; @@ -100271,9 +105049,24 @@ SQLITE_PRIVATE void sqlite3AddColumn(Parse *pParse, Token *pName, Token *pType){ */ SQLITE_PRIVATE void sqlite3AddNotNull(Parse *pParse, int onError){ Table *p; + Column *pCol; p = pParse->pNewTable; if( p==0 || NEVER(p->nCol<1) ) return; - p->aCol[p->nCol-1].notNull = (u8)onError; + pCol = &p->aCol[p->nCol-1]; + pCol->notNull = (u8)onError; + p->tabFlags |= TF_HasNotNull; + + /* Set the uniqNotNull flag on any UNIQUE or PK indexes already created + ** on this column. */ + if( pCol->colFlags & COLFLAG_UNIQUE ){ + Index *pIdx; + for(pIdx=p->pIndex; pIdx; pIdx=pIdx->pNext){ + assert( pIdx->nKeyCol==1 && pIdx->onError!=OE_None ); + if( pIdx->aiColumn[0]==p->nCol-1 ){ + pIdx->uniqNotNull = 1; + } + } + } } /* @@ -100301,7 +105094,7 @@ SQLITE_PRIVATE void sqlite3AddNotNull(Parse *pParse, int onError){ ** If none of the substrings in the above table are found, ** SQLITE_AFF_NUMERIC is returned. */ -SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn, u8 *pszEst){ +SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn, Column *pCol){ u32 h = 0; char aff = SQLITE_AFF_NUMERIC; const char *zChar = 0; @@ -100338,27 +105131,32 @@ SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn, u8 *pszEst){ } } - /* If pszEst is not NULL, store an estimate of the field size. The + /* If pCol is not NULL, store an estimate of the field size. The ** estimate is scaled so that the size of an integer is 1. */ - if( pszEst ){ - *pszEst = 1; /* default size is approx 4 bytes */ + if( pCol ){ + int v = 0; /* default size is approx 4 bytes */ if( aff<SQLITE_AFF_NUMERIC ){ if( zChar ){ while( zChar[0] ){ if( sqlite3Isdigit(zChar[0]) ){ - int v = 0; + /* BLOB(k), VARCHAR(k), CHAR(k) -> r=(k/4+1) */ sqlite3GetInt32(zChar, &v); - v = v/4 + 1; - if( v>255 ) v = 255; - *pszEst = v; /* BLOB(k), VARCHAR(k), CHAR(k) -> r=(k/4+1) */ break; } zChar++; } }else{ - *pszEst = 5; /* BLOB, TEXT, CLOB -> r=5 (approx 20 bytes)*/ + v = 16; /* BLOB, TEXT, CLOB -> r=5 (approx 20 bytes)*/ } } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( v>=sqlite3GlobalConfig.szSorterRef ){ + pCol->colFlags |= COLFLAG_SORTERREF; + } +#endif + v = v/4 + 1; + if( v>255 ) v = 255; + pCol->szEst = v; } return aff; } @@ -100373,34 +105171,37 @@ SQLITE_PRIVATE char sqlite3AffinityType(const char *zIn, u8 *pszEst){ ** This routine is called by the parser while in the middle of ** parsing a CREATE TABLE statement. */ -SQLITE_PRIVATE void sqlite3AddDefaultValue(Parse *pParse, ExprSpan *pSpan){ +SQLITE_PRIVATE void sqlite3AddDefaultValue( + Parse *pParse, /* Parsing context */ + Expr *pExpr, /* The parsed expression of the default value */ + const char *zStart, /* Start of the default value text */ + const char *zEnd /* First character past end of defaut value text */ +){ Table *p; Column *pCol; sqlite3 *db = pParse->db; p = pParse->pNewTable; if( p!=0 ){ pCol = &(p->aCol[p->nCol-1]); - if( !sqlite3ExprIsConstantOrFunction(pSpan->pExpr, db->init.busy) ){ + if( !sqlite3ExprIsConstantOrFunction(pExpr, db->init.busy) ){ sqlite3ErrorMsg(pParse, "default value of column [%s] is not constant", pCol->zName); }else{ /* A copy of pExpr is used instead of the original, as pExpr contains - ** tokens that point to volatile memory. The 'span' of the expression - ** is required by pragma table_info. + ** tokens that point to volatile memory. */ Expr x; sqlite3ExprDelete(db, pCol->pDflt); memset(&x, 0, sizeof(x)); x.op = TK_SPAN; - x.u.zToken = sqlite3DbStrNDup(db, (char*)pSpan->zStart, - (int)(pSpan->zEnd - pSpan->zStart)); - x.pLeft = pSpan->pExpr; + x.u.zToken = sqlite3DbSpanDup(db, zStart, zEnd); + x.pLeft = pExpr; x.flags = EP_Skip; pCol->pDflt = sqlite3ExprDup(db, &x, EXPRDUP_REDUCE); sqlite3DbFree(db, x.u.zToken); } } - sqlite3ExprDelete(db, pSpan->pExpr); + sqlite3ExprDelete(db, pExpr); } /* @@ -100631,7 +105432,7 @@ SQLITE_PRIVATE void sqlite3ChangeCookie(Parse *pParse, int iDb){ Vdbe *v = pParse->pVdbe; assert( sqlite3SchemaMutexHeld(db, iDb, 0) ); sqlite3VdbeAddOp3(v, OP_SetCookie, iDb, BTREE_SCHEMA_VERSION, - db->aDb[iDb].pSchema->schema_cookie+1); + (int)(1+(unsigned)db->aDb[iDb].pSchema->schema_cookie)); } /* @@ -100824,9 +105625,8 @@ static int hasColumn(const i16 *aiCol, int nCol, int x){ ** Changes include: ** ** (1) Set all columns of the PRIMARY KEY schema object to be NOT NULL. -** (2) Convert the OP_CreateTable into an OP_CreateIndex. There is -** no rowid btree for a WITHOUT ROWID. Instead, the canonical -** data storage is a covering index btree. +** (2) Convert P3 parameter of the OP_CreateBtree from BTREE_INTKEY +** into BTREE_BLOBKEY. ** (3) Bypass the creation of the sqlite_master table entry ** for the PRIMARY KEY as the primary key index is now ** identified by the sqlite_master table entry of the table itself. @@ -100834,7 +105634,7 @@ static int hasColumn(const i16 *aiCol, int nCol, int x){ ** schema to the rootpage from the main table. ** (5) Add all table columns to the PRIMARY KEY Index object ** so that the PRIMARY KEY is a covering index. The surplus -** columns are part of KeyInfo.nXField and are not used for +** columns are part of KeyInfo.nAllField and are not used for ** sorting or lookup or uniqueness checks. ** (6) Replace the rowid tail on all automatically generated UNIQUE ** indices with the PRIMARY KEY columns. @@ -100863,13 +105663,12 @@ static void convertToWithoutRowidTable(Parse *pParse, Table *pTab){ ** virtual tables */ if( IN_DECLARE_VTAB ) return; - /* Convert the OP_CreateTable opcode that would normally create the - ** root-page for the table into an OP_CreateIndex opcode. The index - ** created will become the PRIMARY KEY index. + /* Convert the P3 operand of the OP_CreateBtree opcode from BTREE_INTKEY + ** into BTREE_BLOBKEY. */ if( pParse->addrCrTab ){ assert( v ); - sqlite3VdbeChangeOpcode(v, pParse->addrCrTab, OP_CreateIndex); + sqlite3VdbeChangeP3(v, pParse->addrCrTab, BTREE_BLOBKEY); } /* Locate the PRIMARY KEY index. Or, if this table was originally @@ -100892,15 +105691,6 @@ static void convertToWithoutRowidTable(Parse *pParse, Table *pTab){ }else{ pPk = sqlite3PrimaryKeyIndex(pTab); - /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master - ** table entry. This is only required if currently generating VDBE - ** code for a CREATE TABLE (not when parsing one as part of reading - ** a database schema). */ - if( v ){ - assert( db->init.busy==0 ); - sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto); - } - /* ** Remove all redundant columns from the PRIMARY KEY. For example, change ** "PRIMARY KEY(a,b,a,b,c,b,c,d)" into just "PRIMARY KEY(a,b,c,d)". Later @@ -100920,6 +105710,15 @@ static void convertToWithoutRowidTable(Parse *pParse, Table *pTab){ if( !db->init.imposterTable ) pPk->uniqNotNull = 1; nPk = pPk->nKeyCol; + /* Bypass the creation of the PRIMARY KEY btree and the sqlite_master + ** table entry. This is only required if currently generating VDBE + ** code for a CREATE TABLE (not when parsing one as part of reading + ** a database schema). */ + if( v && pPk->tnum>0 ){ + assert( db->init.busy==0 ); + sqlite3VdbeChangeOpcode(v, pPk->tnum, OP_Goto); + } + /* The root page of the PRIMARY KEY is the table root page */ pPk->tnum = pTab->tnum; @@ -101007,8 +105806,6 @@ SQLITE_PRIVATE void sqlite3EndTable( p = pParse->pNewTable; if( p==0 ) return; - assert( !db->init.busy || !pSelect ); - /* If the db->init.busy is 1 it means we are reading the SQL off the ** "sqlite_master" or "sqlite_temp_master" table on the disk. ** So do not write to the disk again. Extract the root page number @@ -101019,6 +105816,10 @@ SQLITE_PRIVATE void sqlite3EndTable( ** table itself. So mark it read-only. */ if( db->init.busy ){ + if( pSelect ){ + sqlite3ErrorMsg(pParse, ""); + return; + } p->tnum = db->init.newTnum; if( p->tnum==1 ) p->tabFlags |= TF_Readonly; } @@ -101119,10 +105920,6 @@ SQLITE_PRIVATE void sqlite3EndTable( pParse->nTab = 2; addrTop = sqlite3VdbeCurrentAddr(v) + 1; sqlite3VdbeAddOp3(v, OP_InitCoroutine, regYield, 0, addrTop); - sqlite3SelectDestInit(&dest, SRT_Coroutine, regYield); - sqlite3Select(pParse, pSelect, &dest); - sqlite3VdbeEndCoroutine(v, regYield); - sqlite3VdbeJumpHere(v, addrTop - 1); if( pParse->nErr ) return; pSelTab = sqlite3ResultSetOfSelect(pParse, pSelect); if( pSelTab==0 ) return; @@ -101132,6 +105929,11 @@ SQLITE_PRIVATE void sqlite3EndTable( pSelTab->nCol = 0; pSelTab->aCol = 0; sqlite3DeleteTable(db, pSelTab); + sqlite3SelectDestInit(&dest, SRT_Coroutine, regYield); + sqlite3Select(pParse, pSelect, &dest); + if( pParse->nErr ) return; + sqlite3VdbeEndCoroutine(v, regYield); + sqlite3VdbeJumpHere(v, addrTop - 1); addrInsLoop = sqlite3VdbeAddOp1(v, OP_Yield, dest.iSDParm); VdbeCoverage(v); sqlite3VdbeAddOp3(v, OP_MakeRecord, dest.iSdst, dest.nSdst, regRec); @@ -101209,7 +106011,7 @@ SQLITE_PRIVATE void sqlite3EndTable( return; } pParse->pNewTable = 0; - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; #ifndef SQLITE_OMIT_ALTERTABLE if( !p->pSelect ){ @@ -101274,7 +106076,7 @@ SQLITE_PRIVATE void sqlite3CreateView( ** the end. */ sEnd = pParse->sLastToken; - assert( sEnd.z[0]!=0 ); + assert( sEnd.z[0]!=0 || sEnd.n==0 ); if( sEnd.z[0]!=';' ){ sEnd.z += sEnd.n; } @@ -101308,6 +106110,9 @@ SQLITE_PRIVATE int sqlite3ViewGetColumnNames(Parse *pParse, Table *pTable){ int nErr = 0; /* Number of errors encountered */ int n; /* Temporarily holds the number of cursors assigned */ sqlite3 *db = pParse->db; /* Database connection for malloc errors */ +#ifndef SQLITE_OMIT_VIRTUALTABLE + int rc; +#endif #ifndef SQLITE_OMIT_AUTHORIZATION sqlite3_xauth xAuth; /* Saved xAuth pointer */ #endif @@ -101315,8 +106120,11 @@ SQLITE_PRIVATE int sqlite3ViewGetColumnNames(Parse *pParse, Table *pTable){ assert( pTable ); #ifndef SQLITE_OMIT_VIRTUALTABLE - if( sqlite3VtabCallConnect(pParse, pTable) ){ - return SQLITE_ERROR; + db->nSchemaLock++; + rc = sqlite3VtabCallConnect(pParse, pTable); + db->nSchemaLock--; + if( rc ){ + return 1; } if( IsVirtual(pTable) ) return 0; #endif @@ -101512,14 +106320,6 @@ static void destroyRootPage(Parse *pParse, int iTable, int iDb){ ** is also added (this can happen with an auto-vacuum database). */ static void destroyTable(Parse *pParse, Table *pTab){ -#ifdef SQLITE_OMIT_AUTOVACUUM - Index *pIdx; - int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); - destroyRootPage(pParse, pTab->tnum, iDb); - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - destroyRootPage(pParse, pIdx->tnum, iDb); - } -#else /* If the database may be auto-vacuum capable (if SQLITE_OMIT_AUTOVACUUM ** is not defined), then it is important to call OP_Destroy on the ** table and index root-pages in order, starting with the numerically @@ -101562,7 +106362,6 @@ static void destroyTable(Parse *pParse, Table *pTab){ iDestroyed = iLargest; } } -#endif } /* @@ -101966,6 +106765,7 @@ static void sqlite3RefillIndex(Parse *pParse, Index *pIndex, int memRootPage){ sqlite3OpenTable(pParse, iTab, iDb, pTab, OP_OpenRead); addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iTab, 0); VdbeCoverage(v); regRecord = sqlite3GetTempReg(pParse); + sqlite3MultiWrite(pParse); sqlite3GenerateIndexKey(pParse,pIndex,iTab,regRecord,0,&iPartIdxLabel,0,0); sqlite3VdbeAddOp2(v, OP_SorterInsert, iSorter, regRecord); @@ -101979,17 +106779,18 @@ static void sqlite3RefillIndex(Parse *pParse, Index *pIndex, int memRootPage){ addr1 = sqlite3VdbeAddOp2(v, OP_SorterSort, iSorter, 0); VdbeCoverage(v); if( IsUniqueIndex(pIndex) ){ - int j2 = sqlite3VdbeCurrentAddr(v) + 3; - sqlite3VdbeGoto(v, j2); + int j2 = sqlite3VdbeGoto(v, 1); addr2 = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeVerifyAbortable(v, OE_Abort); sqlite3VdbeAddOp4Int(v, OP_SorterCompare, iSorter, j2, regRecord, pIndex->nKeyCol); VdbeCoverage(v); sqlite3UniqueConstraint(pParse, OE_Abort, pIndex); + sqlite3VdbeJumpHere(v, j2); }else{ addr2 = sqlite3VdbeCurrentAddr(v); } sqlite3VdbeAddOp3(v, OP_SorterData, iSorter, regRecord, iIdx); - sqlite3VdbeAddOp3(v, OP_Last, iIdx, 0, -1); + sqlite3VdbeAddOp1(v, OP_SeekEnd, iIdx); sqlite3VdbeAddOp2(v, OP_IdxInsert, iIdx, regRecord); sqlite3VdbeChangeP5(v, OPFLAG_USESEEKRESULT); sqlite3ReleaseTempReg(pParse, regRecord); @@ -102147,7 +106948,11 @@ SQLITE_PRIVATE void sqlite3CreateIndex( #if SQLITE_USER_AUTHENTICATION && sqlite3UserAuthTable(pTab->zName)==0 #endif - && sqlite3StrNICmp(&pTab->zName[7],"altertab_",9)!=0 ){ +#ifdef SQLITE_ALLOW_SQLITE_MASTER_INDEX + && sqlite3StrICmp(&pTab->zName[7],"master")!=0 +#endif + && sqlite3StrNICmp(&pTab->zName[7],"altertab_",9)!=0 + ){ sqlite3ErrorMsg(pParse, "table %s may not be indexed", pTab->zName); goto exit_create_index; } @@ -102238,7 +107043,9 @@ SQLITE_PRIVATE void sqlite3CreateIndex( */ if( pList==0 ){ Token prevCol; - sqlite3TokenInit(&prevCol, pTab->aCol[pTab->nCol-1].zName); + Column *pCol = &pTab->aCol[pTab->nCol-1]; + pCol->colFlags |= COLFLAG_UNIQUE; + sqlite3TokenInit(&prevCol, pCol->zName); pList = sqlite3ExprListAppend(pParse, 0, sqlite3ExprAlloc(db, TK_ID, &prevCol, 0)); if( pList==0 ) goto exit_create_index; @@ -102478,7 +107285,7 @@ SQLITE_PRIVATE void sqlite3CreateIndex( sqlite3OomFault(db); goto exit_create_index; } - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; if( pTblName!=0 ){ pIndex->tnum = db->init.newTnum; } @@ -102514,7 +107321,7 @@ SQLITE_PRIVATE void sqlite3CreateIndex( ** that case the convertToWithoutRowidTable() routine will replace ** the Noop with a Goto to jump over the VDBE code generated below. */ pIndex->tnum = sqlite3VdbeAddOp0(v, OP_Noop); - sqlite3VdbeAddOp2(v, OP_CreateIndex, iDb, iMem); + sqlite3VdbeAddOp3(v, OP_CreateBtree, iDb, iMem, BTREE_BLOBKEY); /* Gather the complete text of the CREATE INDEX statement into ** the zStmt variable @@ -102613,6 +107420,9 @@ SQLITE_PRIVATE void sqlite3DefaultRowEst(Index *pIdx){ int nCopy = MIN(ArraySize(aVal), pIdx->nKeyCol); int i; + /* Indexes with default row estimates should not have stat1 data */ + assert( !pIdx->hasStat1 ); + /* Set the first entry (number of rows in the index) to the estimated ** number of rows in the table, or half the number of rows in the table ** for a partial index. But do not let the estimate drop below 10. */ @@ -102778,7 +107588,7 @@ SQLITE_PRIVATE void sqlite3IdListDelete(sqlite3 *db, IdList *pList){ sqlite3DbFree(db, pList->a[i].zName); } sqlite3DbFree(db, pList->a); - sqlite3DbFree(db, pList); + sqlite3DbFreeNN(db, pList); } /* @@ -102923,12 +107733,12 @@ SQLITE_PRIVATE SrcList *sqlite3SrcListAppend( pDatabase = 0; } if( pDatabase ){ - Token *pTemp = pDatabase; - pDatabase = pTable; - pTable = pTemp; + pItem->zName = sqlite3NameFromToken(db, pDatabase); + pItem->zDatabase = sqlite3NameFromToken(db, pTable); + }else{ + pItem->zName = sqlite3NameFromToken(db, pTable); + pItem->zDatabase = 0; } - pItem->zName = sqlite3NameFromToken(db, pTable); - pItem->zDatabase = sqlite3NameFromToken(db, pDatabase); return pList; } @@ -102968,7 +107778,7 @@ SQLITE_PRIVATE void sqlite3SrcListDelete(sqlite3 *db, SrcList *pList){ sqlite3ExprDelete(db, pItem->pOn); sqlite3IdListDelete(db, pItem->pUsing); } - sqlite3DbFree(db, pList); + sqlite3DbFreeNN(db, pList); } /* @@ -103006,9 +107816,10 @@ SQLITE_PRIVATE SrcList *sqlite3SrcListAppendFromTerm( goto append_from_error; } p = sqlite3SrcListAppend(db, p, pTable, pDatabase); - if( p==0 || NEVER(p->nSrc==0) ){ + if( p==0 ){ goto append_from_error; } + assert( p->nSrc>0 ); pItem = &p->a[p->nSrc-1]; assert( pAlias!=0 ); if( pAlias->n ){ @@ -103033,8 +107844,10 @@ SQLITE_PRIVATE SrcList *sqlite3SrcListAppendFromTerm( */ SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *pParse, SrcList *p, Token *pIndexedBy){ assert( pIndexedBy!=0 ); - if( p && ALWAYS(p->nSrc>0) ){ - struct SrcList_item *pItem = &p->a[p->nSrc-1]; + if( p && pIndexedBy->n>0 ){ + struct SrcList_item *pItem; + assert( p->nSrc>0 ); + pItem = &p->a[p->nSrc-1]; assert( pItem->fg.notIndexed==0 ); assert( pItem->fg.isIndexedBy==0 ); assert( pItem->fg.isTabFunc==0 ); @@ -103044,7 +107857,7 @@ SQLITE_PRIVATE void sqlite3SrcListIndexedBy(Parse *pParse, SrcList *p, Token *pI pItem->fg.notIndexed = 1; }else{ pItem->u1.zIndexedBy = sqlite3NameFromToken(pParse->db, pIndexedBy); - pItem->fg.isIndexedBy = (pItem->u1.zIndexedBy!=0); + pItem->fg.isIndexedBy = 1; } } } @@ -103117,36 +107930,25 @@ SQLITE_PRIVATE void sqlite3BeginTransaction(Parse *pParse, int type){ } /* -** Generate VDBE code for a COMMIT statement. +** Generate VDBE code for a COMMIT or ROLLBACK statement. +** Code for ROLLBACK is generated if eType==TK_ROLLBACK. Otherwise +** code is generated for a COMMIT. */ -SQLITE_PRIVATE void sqlite3CommitTransaction(Parse *pParse){ +SQLITE_PRIVATE void sqlite3EndTransaction(Parse *pParse, int eType){ Vdbe *v; + int isRollback; assert( pParse!=0 ); assert( pParse->db!=0 ); - if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "COMMIT", 0, 0) ){ + assert( eType==TK_COMMIT || eType==TK_END || eType==TK_ROLLBACK ); + isRollback = eType==TK_ROLLBACK; + if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, + isRollback ? "ROLLBACK" : "COMMIT", 0, 0) ){ return; } v = sqlite3GetVdbe(pParse); if( v ){ - sqlite3VdbeAddOp1(v, OP_AutoCommit, 1); - } -} - -/* -** Generate VDBE code for a ROLLBACK statement. -*/ -SQLITE_PRIVATE void sqlite3RollbackTransaction(Parse *pParse){ - Vdbe *v; - - assert( pParse!=0 ); - assert( pParse->db!=0 ); - if( sqlite3AuthCheck(pParse, SQLITE_TRANSACTION, "ROLLBACK", 0, 0) ){ - return; - } - v = sqlite3GetVdbe(pParse); - if( v ){ - sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, 1); + sqlite3VdbeAddOp2(v, OP_AutoCommit, 1, isRollback); } } @@ -103329,14 +108131,16 @@ SQLITE_PRIVATE void sqlite3UniqueConstraint( sqlite3StrAccumInit(&errMsg, pParse->db, 0, 0, 200); if( pIdx->aColExpr ){ - sqlite3XPrintf(&errMsg, "index '%q'", pIdx->zName); + sqlite3_str_appendf(&errMsg, "index '%q'", pIdx->zName); }else{ for(j=0; j<pIdx->nKeyCol; j++){ char *zCol; assert( pIdx->aiColumn[j]>=0 ); zCol = pTab->aCol[pIdx->aiColumn[j]].zName; - if( j ) sqlite3StrAccumAppend(&errMsg, ", ", 2); - sqlite3XPrintf(&errMsg, "%s.%s", pTab->zName, zCol); + if( j ) sqlite3_str_append(&errMsg, ", ", 2); + sqlite3_str_appendall(&errMsg, pTab->zName); + sqlite3_str_append(&errMsg, ".", 1); + sqlite3_str_appendall(&errMsg, zCol); } } zErr = sqlite3StrAccumFinish(&errMsg); @@ -103524,6 +108328,18 @@ SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoOfIndex(Parse *pParse, Index *pIdx){ pKey->aSortOrder[i] = pIdx->aSortOrder[i]; } if( pParse->nErr ){ + assert( pParse->rc==SQLITE_ERROR_MISSING_COLLSEQ ); + if( pIdx->bNoQuery==0 ){ + /* Deactivate the index because it contains an unknown collating + ** sequence. The only way to reactive the index is to reload the + ** schema. Adding the missing collating sequence later does not + ** reactive the index. The application had the chance to register + ** the missing index using the collation-needed callback. For + ** simplicity, SQLite will not give the application a second chance. + */ + pIdx->bNoQuery = 1; + pParse->rc = SQLITE_ERROR_RETRY; + } sqlite3KeyInfoUnref(pKey); pKey = 0; } @@ -103709,6 +108525,7 @@ SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq( assert( !p || p->xCmp ); if( p==0 ){ sqlite3ErrorMsg(pParse, "no such collation sequence: %s", zName); + pParse->rc = SQLITE_ERROR_MISSING_COLLSEQ; } return p; } @@ -103725,7 +108542,7 @@ SQLITE_PRIVATE CollSeq *sqlite3GetCollSeq( ** from the main database is substituted, if one is available. */ SQLITE_PRIVATE int sqlite3CheckCollSeq(Parse *pParse, CollSeq *pColl){ - if( pColl ){ + if( pColl && pColl->xCmp==0 ){ const char *zName = pColl->zName; sqlite3 *db = pParse->db; CollSeq *p = sqlite3GetCollSeq(pParse, ENC(db), pColl, zName); @@ -103761,8 +108578,8 @@ static CollSeq *findCollSeqEntry( pColl = sqlite3HashFind(&db->aCollSeq, zName); if( 0==pColl && create ){ - int nName = sqlite3Strlen30(zName); - pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName + 1); + int nName = sqlite3Strlen30(zName) + 1; + pColl = sqlite3DbMallocZero(db, 3*sizeof(*pColl) + nName); if( pColl ){ CollSeq *pDel = 0; pColl[0].zName = (char*)&pColl[3]; @@ -103772,7 +108589,6 @@ static CollSeq *findCollSeqEntry( pColl[2].zName = (char*)&pColl[3]; pColl[2].enc = SQLITE_UTF16BE; memcpy(pColl[0].zName, zName, nName); - pColl[0].zName[nName] = 0; pDel = sqlite3HashInsert(&db->aCollSeq, pColl[0].zName, pColl); /* If a malloc() failure occurred in sqlite3HashInsert(), it will @@ -103912,7 +108728,8 @@ SQLITE_PRIVATE void sqlite3InsertBuiltinFuncs( FuncDef *pOther; const char *zName = aDef[i].zName; int nName = sqlite3Strlen30(zName); - int h = (sqlite3UpperToLower[(u8)zName[0]] + nName) % SQLITE_FUNC_HASH_SZ; + int h = (zName[0] + nName) % SQLITE_FUNC_HASH_SZ; + assert( zName[0]>='a' && zName[0]<='z' ); pOther = functionSearch(h, zName); if( pOther ){ assert( pOther!=&aDef[i] && pOther->pNext!=&aDef[i] ); @@ -103978,7 +108795,7 @@ SQLITE_PRIVATE FuncDef *sqlite3FindFunction( /* If no match is found, search the built-in functions. ** - ** If the SQLITE_PreferBuiltin flag is set, then search the built-in + ** If the DBFLAG_PreferBuiltin flag is set, then search the built-in ** functions even if a prior app-defined function was found. And give ** priority to built-in functions. ** @@ -103988,7 +108805,7 @@ SQLITE_PRIVATE FuncDef *sqlite3FindFunction( ** new function. But the FuncDefs for built-in functions are read-only. ** So we must not search for built-ins when creating a new function. */ - if( !createFlag && (pBest==0 || (db->flags & SQLITE_PreferBuiltin)!=0) ){ + if( !createFlag && (pBest==0 || (db->mDbFlags & DBFLAG_PreferBuiltin)!=0) ){ bestScore = 0; h = (sqlite3UpperToLower[(u8)zName[0]] + nName) % SQLITE_FUNC_HASH_SZ; p = functionSearch(h, zName); @@ -104009,10 +108826,12 @@ SQLITE_PRIVATE FuncDef *sqlite3FindFunction( if( createFlag && bestScore<FUNC_PERFECT_MATCH && (pBest = sqlite3DbMallocZero(db, sizeof(*pBest)+nName+1))!=0 ){ FuncDef *pOther; + u8 *z; pBest->zName = (const char*)&pBest[1]; pBest->nArg = (u16)nArg; pBest->funcFlags = enc; memcpy((char*)&pBest[1], zName, nName+1); + for(z=(u8*)pBest->zName; *z; z++) *z = sqlite3UpperToLower[*z]; pOther = (FuncDef*)sqlite3HashInsert(&db->aFunc, pBest->zName, pBest); if( pOther==pBest ){ sqlite3DbFree(db, pBest); @@ -104061,8 +108880,8 @@ SQLITE_PRIVATE void sqlite3SchemaClear(void *p){ pSchema->pSeqTab = 0; if( pSchema->schemaFlags & DB_SchemaLoaded ){ pSchema->iGeneration++; - pSchema->schemaFlags &= ~DB_SchemaLoaded; } + pSchema->schemaFlags &= ~(DB_SchemaLoaded|DB_ResetWanted); } /* @@ -104182,6 +109001,8 @@ SQLITE_PRIVATE void sqlite3MaterializeView( Parse *pParse, /* Parsing context */ Table *pView, /* View definition */ Expr *pWhere, /* Optional WHERE clause to be added */ + ExprList *pOrderBy, /* Optional ORDER BY clause */ + Expr *pLimit, /* Optional LIMIT clause */ int iCur /* Cursor number for ephemeral table */ ){ SelectDest dest; @@ -104198,8 +109019,8 @@ SQLITE_PRIVATE void sqlite3MaterializeView( assert( pFrom->a[0].pOn==0 ); assert( pFrom->a[0].pUsing==0 ); } - pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, 0, - SF_IncludeHidden, 0, 0); + pSel = sqlite3SelectNew(pParse, 0, pFrom, pWhere, 0, 0, pOrderBy, + SF_IncludeHidden, pLimit); sqlite3SelectDestInit(&dest, SRT_EphemTab, iCur); sqlite3Select(pParse, pSel, &dest); sqlite3SelectDelete(db, pSel); @@ -104221,29 +109042,29 @@ SQLITE_PRIVATE Expr *sqlite3LimitWhere( Expr *pWhere, /* The WHERE clause. May be null */ ExprList *pOrderBy, /* The ORDER BY clause. May be null */ Expr *pLimit, /* The LIMIT clause. May be null */ - Expr *pOffset, /* The OFFSET clause. May be null */ char *zStmtType /* Either DELETE or UPDATE. For err msgs. */ ){ - Expr *pWhereRowid = NULL; /* WHERE rowid .. */ + sqlite3 *db = pParse->db; + Expr *pLhs = NULL; /* LHS of IN(SELECT...) operator */ Expr *pInClause = NULL; /* WHERE rowid IN ( select ) */ - Expr *pSelectRowid = NULL; /* SELECT rowid ... */ ExprList *pEList = NULL; /* Expression list contaning only pSelectRowid */ SrcList *pSelectSrc = NULL; /* SELECT rowid FROM x ... (dup of pSrc) */ Select *pSelect = NULL; /* Complete SELECT tree */ + Table *pTab; /* Check that there isn't an ORDER BY without a LIMIT clause. */ - if( pOrderBy && (pLimit == 0) ) { + if( pOrderBy && pLimit==0 ) { sqlite3ErrorMsg(pParse, "ORDER BY without LIMIT on %s", zStmtType); - goto limit_where_cleanup; + sqlite3ExprDelete(pParse->db, pWhere); + sqlite3ExprListDelete(pParse->db, pOrderBy); + return 0; } /* We only need to generate a select expression if there ** is a limit/offset term to enforce. */ if( pLimit == 0 ) { - /* if pLimit is null, pOffset will always be null as well. */ - assert( pOffset == 0 ); return pWhere; } @@ -104256,36 +109077,47 @@ SQLITE_PRIVATE Expr *sqlite3LimitWhere( ** ); */ - pSelectRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0); - if( pSelectRowid == 0 ) goto limit_where_cleanup; - pEList = sqlite3ExprListAppend(pParse, 0, pSelectRowid); - if( pEList == 0 ) goto limit_where_cleanup; + pTab = pSrc->a[0].pTab; + if( HasRowid(pTab) ){ + pLhs = sqlite3PExpr(pParse, TK_ROW, 0, 0); + pEList = sqlite3ExprListAppend( + pParse, 0, sqlite3PExpr(pParse, TK_ROW, 0, 0) + ); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + if( pPk->nKeyCol==1 ){ + const char *zName = pTab->aCol[pPk->aiColumn[0]].zName; + pLhs = sqlite3Expr(db, TK_ID, zName); + pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db, TK_ID, zName)); + }else{ + int i; + for(i=0; i<pPk->nKeyCol; i++){ + Expr *p = sqlite3Expr(db, TK_ID, pTab->aCol[pPk->aiColumn[i]].zName); + pEList = sqlite3ExprListAppend(pParse, pEList, p); + } + pLhs = sqlite3PExpr(pParse, TK_VECTOR, 0, 0); + if( pLhs ){ + pLhs->x.pList = sqlite3ExprListDup(db, pEList, 0); + } + } + } /* duplicate the FROM clause as it is needed by both the DELETE/UPDATE tree ** and the SELECT subtree. */ + pSrc->a[0].pTab = 0; pSelectSrc = sqlite3SrcListDup(pParse->db, pSrc, 0); - if( pSelectSrc == 0 ) { - sqlite3ExprListDelete(pParse->db, pEList); - goto limit_where_cleanup; - } + pSrc->a[0].pTab = pTab; + pSrc->a[0].pIBIndex = 0; /* generate the SELECT expression tree. */ - pSelect = sqlite3SelectNew(pParse,pEList,pSelectSrc,pWhere,0,0, - pOrderBy,0,pLimit,pOffset); - if( pSelect == 0 ) return 0; + pSelect = sqlite3SelectNew(pParse, pEList, pSelectSrc, pWhere, 0 ,0, + pOrderBy,0,pLimit + ); /* now generate the new WHERE rowid IN clause for the DELETE/UDPATE */ - pWhereRowid = sqlite3PExpr(pParse, TK_ROW, 0, 0); - pInClause = pWhereRowid ? sqlite3PExpr(pParse, TK_IN, pWhereRowid, 0) : 0; + pInClause = sqlite3PExpr(pParse, TK_IN, pLhs, 0); sqlite3PExprAddSelect(pParse, pInClause, pSelect); return pInClause; - -limit_where_cleanup: - sqlite3ExprDelete(pParse->db, pWhere); - sqlite3ExprListDelete(pParse->db, pOrderBy); - sqlite3ExprDelete(pParse->db, pLimit); - sqlite3ExprDelete(pParse->db, pOffset); - return 0; } #endif /* defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) */ /* && !defined(SQLITE_OMIT_SUBQUERY) */ @@ -104300,7 +109132,9 @@ limit_where_cleanup: SQLITE_PRIVATE void sqlite3DeleteFrom( Parse *pParse, /* The parser context */ SrcList *pTabList, /* The table from which we should delete things */ - Expr *pWhere /* The WHERE clause. May be null */ + Expr *pWhere, /* The WHERE clause. May be null */ + ExprList *pOrderBy, /* ORDER BY clause. May be null */ + Expr *pLimit /* LIMIT clause. May be null */ ){ Vdbe *v; /* The virtual database engine */ Table *pTab; /* The table from which records will be deleted */ @@ -104315,7 +109149,7 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( AuthContext sContext; /* Authorization context */ NameContext sNC; /* Name context to resolve expressions in */ int iDb; /* Database number */ - int memCnt = -1; /* Memory cell used for change counting */ + int memCnt = 0; /* Memory cell used for change counting */ int rcauth; /* Value returned by authorization callback */ int eOnePass; /* ONEPASS_OFF or _SINGLE or _MULTI */ int aiCurOnePass[2]; /* The write cursors opened by WHERE_ONEPASS */ @@ -104345,6 +109179,7 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( } assert( pTabList->nSrc==1 ); + /* Locate the table which we want to delete. This table has to be ** put in an SrcList structure because some of the subroutines we ** will be calling are designed to work with multiple tables and expect @@ -104359,16 +109194,26 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( #ifndef SQLITE_OMIT_TRIGGER pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); isView = pTab->pSelect!=0; - bComplex = pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0); #else # define pTrigger 0 # define isView 0 #endif + bComplex = pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0); #ifdef SQLITE_OMIT_VIEW # undef isView # define isView 0 #endif +#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT + if( !isView ){ + pWhere = sqlite3LimitWhere( + pParse, pTabList, pWhere, pOrderBy, pLimit, "DELETE" + ); + pOrderBy = 0; + pLimit = 0; + } +#endif + /* If pTab is really a view, make sure it has been initialized. */ if( sqlite3ViewGetColumnNames(pParse, pTab) ){ @@ -104409,15 +109254,19 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( goto delete_from_cleanup; } if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); - sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3BeginWriteOperation(pParse, bComplex, iDb); /* If we are trying to delete from a view, realize that view into ** an ephemeral table. */ #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) if( isView ){ - sqlite3MaterializeView(pParse, pTab, pWhere, iTabCur); + sqlite3MaterializeView(pParse, pTab, + pWhere, pOrderBy, pLimit, iTabCur + ); iDataCur = iIdxCur = iTabCur; + pOrderBy = 0; + pLimit = 0; } #endif @@ -104433,7 +109282,10 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( /* Initialize the counter of the number of rows deleted, if ** we are counting rows. */ - if( db->flags & SQLITE_CountRows ){ + if( (db->flags & SQLITE_CountRows)!=0 + && !pParse->nested + && !pParse->pTriggerTab + ){ memCnt = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, memCnt); } @@ -104442,7 +109294,14 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( /* Special case: A DELETE without a WHERE clause deletes everything. ** It is easier just to erase the whole table. Prior to version 3.6.5, ** this optimization caused the row change count (the value returned by - ** API function sqlite3_count_changes) to be set incorrectly. */ + ** API function sqlite3_count_changes) to be set incorrectly. + ** + ** The "rcauth==SQLITE_OK" terms is the + ** IMPLEMENTATION-OF: R-17228-37124 If the action code is SQLITE_DELETE and + ** the callback returns SQLITE_IGNORE then the DELETE operation proceeds but + ** the truncate optimization is disabled and all rows are deleted + ** individually. + */ if( rcauth==SQLITE_OK && pWhere==0 && !bComplex @@ -104454,7 +109313,7 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( assert( !isView ); sqlite3TableLock(pParse, iDb, pTab->tnum, 1, pTab->zName); if( HasRowid(pTab) ){ - sqlite3VdbeAddOp4(v, OP_Clear, pTab->tnum, iDb, memCnt, + sqlite3VdbeAddOp4(v, OP_Clear, pTab->tnum, iDb, memCnt ? memCnt : -1, pTab->zName, P4_STATIC); } for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ @@ -104499,9 +109358,10 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); assert( IsVirtual(pTab)==0 || eOnePass!=ONEPASS_MULTI ); assert( IsVirtual(pTab) || bComplex || eOnePass!=ONEPASS_OFF ); + if( eOnePass!=ONEPASS_SINGLE ) sqlite3MultiWrite(pParse); /* Keep track of the number of rows to be deleted */ - if( db->flags & SQLITE_CountRows ){ + if( memCnt ){ sqlite3VdbeAddOp2(v, OP_AddImm, memCnt, 1); } @@ -104544,7 +109404,7 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( sqlite3VdbeAddOp4Int(v, OP_IdxInsert, iEphCur, iKey, iPk, nPk); }else{ /* Add the rowid of the row to be deleted to the RowSet */ - nKey = 1; /* OP_Seek always uses a single rowid */ + nKey = 1; /* OP_DeferredSeek always uses a single rowid */ sqlite3VdbeAddOp2(v, OP_RowSetAdd, iRowSet, iKey); } } @@ -104587,7 +109447,11 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( } }else if( pPk ){ addrLoop = sqlite3VdbeAddOp1(v, OP_Rewind, iEphCur); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_RowData, iEphCur, iKey); + if( IsVirtual(pTab) ){ + sqlite3VdbeAddOp3(v, OP_Column, iEphCur, 0, iKey); + }else{ + sqlite3VdbeAddOp2(v, OP_RowData, iEphCur, iKey); + } assert( nKey==0 ); /* OP_Found will use a composite key */ }else{ addrLoop = sqlite3VdbeAddOp3(v, OP_RowSetRead, iRowSet, 0, iKey); @@ -104600,13 +109464,16 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( if( IsVirtual(pTab) ){ const char *pVTab = (const char *)sqlite3GetVTable(db, pTab); sqlite3VtabMakeWritable(pParse, pTab); - sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iKey, pVTab, P4_VTAB); - sqlite3VdbeChangeP5(v, OE_Abort); assert( eOnePass==ONEPASS_OFF || eOnePass==ONEPASS_SINGLE ); sqlite3MayAbort(pParse); - if( eOnePass==ONEPASS_SINGLE && sqlite3IsToplevel(pParse) ){ - pParse->isMultiWrite = 0; + if( eOnePass==ONEPASS_SINGLE ){ + sqlite3VdbeAddOp1(v, OP_Close, iTabCur); + if( sqlite3IsToplevel(pParse) ){ + pParse->isMultiWrite = 0; + } } + sqlite3VdbeAddOp4(v, OP_VUpdate, 0, 1, iKey, pVTab, P4_VTAB); + sqlite3VdbeChangeP5(v, OE_Abort); }else #endif { @@ -104640,7 +109507,7 @@ SQLITE_PRIVATE void sqlite3DeleteFrom( ** generating code because of a call to sqlite3NestedParse(), do not ** invoke the callback function. */ - if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ + if( memCnt ){ sqlite3VdbeAddOp2(v, OP_ResultRow, memCnt, 1); sqlite3VdbeSetNumCols(v, 1); sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows deleted", SQLITE_STATIC); @@ -104650,6 +109517,10 @@ delete_from_cleanup: sqlite3AuthContextPop(&sContext); sqlite3SrcListDelete(db, pTabList); sqlite3ExprDelete(db, pWhere); +#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) + sqlite3ExprListDelete(db, pOrderBy); + sqlite3ExprDelete(db, pLimit); +#endif sqlite3DbFree(db, aToOpen); return; } @@ -104807,7 +109678,7 @@ SQLITE_PRIVATE void sqlite3GenerateRowDelete( u8 p5 = 0; sqlite3GenerateRowIndexDelete(pParse, pTab, iDataCur, iIdxCur,0,iIdxNoSeek); sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, (count?OPFLAG_NCHANGE:0)); - if( pParse->nested==0 ){ + if( pParse->nested==0 || 0==sqlite3_stricmp(pTab->zName, "sqlite_stat1") ){ sqlite3VdbeAppendP4(v, (char*)pTab, P4_TABLE); } if( eMode!=ONEPASS_OFF ){ @@ -104937,10 +109808,11 @@ SQLITE_PRIVATE int sqlite3GenerateIndexKey( if( piPartIdxLabel ){ if( pIdx->pPartIdxWhere ){ *piPartIdxLabel = sqlite3VdbeMakeLabel(v); - pParse->iSelfTab = iDataCur; + pParse->iSelfTab = iDataCur + 1; sqlite3ExprCachePush(pParse); sqlite3ExprIfFalseDup(pParse, pIdx->pPartIdxWhere, *piPartIdxLabel, SQLITE_JUMPIFNULL); + pParse->iSelfTab = 0; }else{ *piPartIdxLabel = 0; } @@ -105027,6 +109899,8 @@ static CollSeq *sqlite3GetFuncCollSeq(sqlite3_context *context){ ** iteration of the aggregate loop. */ static void sqlite3SkipAccumulatorLoad(sqlite3_context *context){ + assert( context->isError<=0 ); + context->isError = -1; context->skipFlag = 1; } @@ -105068,16 +109942,20 @@ static void typeofFunc( int NotUsed, sqlite3_value **argv ){ - const char *z = 0; + static const char *azType[] = { "integer", "real", "text", "blob", "null" }; + int i = sqlite3_value_type(argv[0]) - 1; UNUSED_PARAMETER(NotUsed); - switch( sqlite3_value_type(argv[0]) ){ - case SQLITE_INTEGER: z = "integer"; break; - case SQLITE_TEXT: z = "text"; break; - case SQLITE_FLOAT: z = "real"; break; - case SQLITE_BLOB: z = "blob"; break; - default: z = "null"; break; - } - sqlite3_result_text(context, z, -1, SQLITE_STATIC); + assert( i>=0 && i<ArraySize(azType) ); + assert( SQLITE_INTEGER==1 ); + assert( SQLITE_FLOAT==2 ); + assert( SQLITE_TEXT==3 ); + assert( SQLITE_BLOB==4 ); + assert( SQLITE_NULL==5 ); + /* EVIDENCE-OF: R-01470-60482 The sqlite3_value_type(V) interface returns + ** the datatype code for the initial datatype of the sqlite3_value object + ** V. The returned value is one of SQLITE_INTEGER, SQLITE_FLOAT, + ** SQLITE_TEXT, SQLITE_BLOB, or SQLITE_NULL. */ + sqlite3_result_text(context, azType[i], -1, SQLITE_STATIC); } @@ -105089,8 +109967,6 @@ static void lengthFunc( int argc, sqlite3_value **argv ){ - int len; - assert( argc==1 ); UNUSED_PARAMETER(argc); switch( sqlite3_value_type(argv[0]) ){ @@ -105102,13 +109978,17 @@ static void lengthFunc( } case SQLITE_TEXT: { const unsigned char *z = sqlite3_value_text(argv[0]); + const unsigned char *z0; + unsigned char c; if( z==0 ) return; - len = 0; - while( *z ){ - len++; - SQLITE_SKIP_UTF8(z); + z0 = z; + while( (c = *z)!=0 ){ + z++; + if( c>=0xc0 ){ + while( (*z & 0xc0)==0x80 ){ z++; z0++; } + } } - sqlite3_result_int(context, len); + sqlite3_result_int(context, (int)(z-z0)); break; } default: { @@ -105196,15 +110076,13 @@ static void instrFunc( if( typeHaystack==SQLITE_BLOB && typeNeedle==SQLITE_BLOB ){ zHaystack = sqlite3_value_blob(argv[0]); zNeedle = sqlite3_value_blob(argv[1]); - assert( zNeedle!=0 ); - assert( zHaystack!=0 || nHaystack==0 ); isText = 0; }else{ zHaystack = sqlite3_value_text(argv[0]); zNeedle = sqlite3_value_text(argv[1]); isText = 1; - if( zHaystack==0 || zNeedle==0 ) return; } + if( zNeedle==0 || (nHaystack && zHaystack==0) ) return; while( nNeedle<=nHaystack && memcmp(zHaystack, zNeedle, nNeedle)!=0 ){ N++; do{ @@ -105237,7 +110115,7 @@ static void printfFunc( x.apArg = argv+1; sqlite3StrAccumInit(&str, db, 0, 0, db->aLimit[SQLITE_LIMIT_LENGTH]); str.printfFlags = SQLITE_PRINTF_SQLFUNC; - sqlite3XPrintf(&str, zFormat, &x); + sqlite3_str_appendf(&str, zFormat, &x); n = str.nChar; sqlite3_result_text(context, sqlite3StrAccumFinish(&str), n, SQLITE_DYNAMIC); @@ -105688,16 +110566,20 @@ static int patternCompare( ** c or cx. */ if( c<=0x80 ){ - u32 cx; + char zStop[3]; int bMatch; if( noCase ){ - cx = sqlite3Toupper(c); - c = sqlite3Tolower(c); + zStop[0] = sqlite3Toupper(c); + zStop[1] = sqlite3Tolower(c); + zStop[2] = 0; }else{ - cx = c; + zStop[0] = c; + zStop[1] = 0; } - while( (c2 = *(zString++))!=0 ){ - if( c2!=c && c2!=cx ) continue; + while(1){ + zString += strcspn((const char*)zString, zStop); + if( zString[0]==0 ) break; + zString++; bMatch = patternCompare(zPattern,zString,pInfo,matchOther); if( bMatch!=SQLITE_NOMATCH ) return bMatch; } @@ -105855,7 +110737,8 @@ static void likeFunc( #ifdef SQLITE_TEST sqlite3_like_count++; #endif - sqlite3_result_int(context, patternCompare(zB, zA, pInfo, escape)==SQLITE_MATCH); + sqlite3_result_int(context, + patternCompare(zB, zA, pInfo, escape)==SQLITE_MATCH); } } @@ -106180,6 +111063,8 @@ static void replaceFunc( i64 nOut; /* Maximum size of zOut */ int loopLimit; /* Last zStr[] that might match zPattern[] */ int i, j; /* Loop counters */ + unsigned cntExpand; /* Number zOut expansions */ + sqlite3 *db = sqlite3_context_db_handle(context); assert( argc==3 ); UNUSED_PARAMETER(argc); @@ -106211,33 +111096,40 @@ static void replaceFunc( return; } loopLimit = nStr - nPattern; + cntExpand = 0; for(i=j=0; i<=loopLimit; i++){ if( zStr[i]!=zPattern[0] || memcmp(&zStr[i], zPattern, nPattern) ){ zOut[j++] = zStr[i]; }else{ - u8 *zOld; - sqlite3 *db = sqlite3_context_db_handle(context); - nOut += nRep - nPattern; - testcase( nOut-1==db->aLimit[SQLITE_LIMIT_LENGTH] ); - testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] ); - if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){ - sqlite3_result_error_toobig(context); - sqlite3_free(zOut); - return; - } - zOld = zOut; - zOut = sqlite3_realloc64(zOut, (int)nOut); - if( zOut==0 ){ - sqlite3_result_error_nomem(context); - sqlite3_free(zOld); - return; + if( nRep>nPattern ){ + nOut += nRep - nPattern; + testcase( nOut-1==db->aLimit[SQLITE_LIMIT_LENGTH] ); + testcase( nOut-2==db->aLimit[SQLITE_LIMIT_LENGTH] ); + if( nOut-1>db->aLimit[SQLITE_LIMIT_LENGTH] ){ + sqlite3_result_error_toobig(context); + sqlite3_free(zOut); + return; + } + cntExpand++; + if( (cntExpand&(cntExpand-1))==0 ){ + /* Grow the size of the output buffer only on substitutions + ** whose index is a power of two: 1, 2, 4, 8, 16, 32, ... */ + u8 *zOld; + zOld = zOut; + zOut = sqlite3_realloc64(zOut, (int)nOut + (nOut - nStr - 1)); + if( zOut==0 ){ + sqlite3_result_error_nomem(context); + sqlite3_free(zOld); + return; + } + } } memcpy(&zOut[j], zRep, nRep); j += nRep; i += nPattern-1; } } - assert( j+nStr-i+1==nOut ); + assert( j+nStr-i+1<=nOut ); memcpy(&zOut[j], &zStr[i], nStr-i); j += nStr - i; assert( j<=nOut ); @@ -106626,20 +111518,20 @@ static void groupConcatStep( zSep = ","; nSep = 1; } - if( zSep ) sqlite3StrAccumAppend(pAccum, zSep, nSep); + if( zSep ) sqlite3_str_append(pAccum, zSep, nSep); } zVal = (char*)sqlite3_value_text(argv[0]); nVal = sqlite3_value_bytes(argv[0]); - if( zVal ) sqlite3StrAccumAppend(pAccum, zVal, nVal); + if( zVal ) sqlite3_str_append(pAccum, zVal, nVal); } } static void groupConcatFinalize(sqlite3_context *context){ StrAccum *pAccum; pAccum = sqlite3_aggregate_context(context, 0); if( pAccum ){ - if( pAccum->accError==STRACCUM_TOOBIG ){ + if( pAccum->accError==SQLITE_TOOBIG ){ sqlite3_result_error_toobig(context); - }else if( pAccum->accError==STRACCUM_NOMEM ){ + }else if( pAccum->accError==SQLITE_NOMEM ){ sqlite3_result_error_nomem(context); }else{ sqlite3_result_text(context, sqlite3StrAccumFinish(pAccum), -1, @@ -106696,9 +111588,14 @@ SQLITE_PRIVATE void sqlite3RegisterLikeFunctions(sqlite3 *db, int caseSensitive) /* ** pExpr points to an expression which implements a function. If ** it is appropriate to apply the LIKE optimization to that function -** then set aWc[0] through aWc[2] to the wildcard characters and -** return TRUE. If the function is not a LIKE-style function then -** return FALSE. +** then set aWc[0] through aWc[2] to the wildcard characters and the +** escape character and then return TRUE. If the function is not a +** LIKE-style function then return FALSE. +** +** The expression "a LIKE b ESCAPE c" is only considered a valid LIKE +** operator if c is a string literal that is exactly one byte in length. +** That one byte is stored in aWc[3]. aWc[3] is set to zero if there is +** no ESCAPE clause. ** ** *pIsNocase is set to true if uppercase and lowercase are equivalent for ** the function (default for LIKE). If the function makes the distinction @@ -106707,17 +111604,26 @@ SQLITE_PRIVATE void sqlite3RegisterLikeFunctions(sqlite3 *db, int caseSensitive) */ SQLITE_PRIVATE int sqlite3IsLikeFunction(sqlite3 *db, Expr *pExpr, int *pIsNocase, char *aWc){ FuncDef *pDef; - if( pExpr->op!=TK_FUNCTION - || !pExpr->x.pList - || pExpr->x.pList->nExpr!=2 - ){ + int nExpr; + if( pExpr->op!=TK_FUNCTION || !pExpr->x.pList ){ return 0; } assert( !ExprHasProperty(pExpr, EP_xIsSelect) ); - pDef = sqlite3FindFunction(db, pExpr->u.zToken, 2, SQLITE_UTF8, 0); + nExpr = pExpr->x.pList->nExpr; + pDef = sqlite3FindFunction(db, pExpr->u.zToken, nExpr, SQLITE_UTF8, 0); if( NEVER(pDef==0) || (pDef->funcFlags & SQLITE_FUNC_LIKE)==0 ){ return 0; } + if( nExpr<3 ){ + aWc[3] = 0; + }else{ + Expr *pEscape = pExpr->x.pList->a[2].pExpr; + char *zEscape; + if( pEscape->op!=TK_STRING ) return 0; + zEscape = pEscape->u.zToken; + if( zEscape[0]==0 || zEscape[1]!=0 ) return 0; + aWc[3] = zEscape[0]; + } /* The memcpy() statement assumes that the wildcard characters are ** the first three statements in the compareInfo structure. The @@ -106770,6 +111676,10 @@ SQLITE_PRIVATE void sqlite3RegisterBuiltinFunctions(void){ #ifdef SQLITE_DEBUG FUNCTION2(affinity, 1, 0, 0, noopFunc, SQLITE_FUNC_AFFINITY), #endif +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC + FUNCTION2(sqlite_offset, 1, 0, 0, noopFunc, SQLITE_FUNC_OFFSET| + SQLITE_FUNC_TYPEOF), +#endif FUNCTION(ltrim, 1, 1, 0, trimFunc ), FUNCTION(ltrim, 2, 1, 0, trimFunc ), FUNCTION(rtrim, 1, 2, 0, trimFunc ), @@ -107198,6 +112108,12 @@ static void fkLookupParent( int iCur = pParse->nTab - 1; /* Cursor number to use */ int iOk = sqlite3VdbeMakeLabel(v); /* jump here if parent key found */ + sqlite3VdbeVerifyAbortable(v, + (!pFKey->isDeferred + && !(pParse->db->flags & SQLITE_DeferFKs) + && !pParse->pToplevel + && !pParse->isMultiWrite) ? OE_Abort : OE_Ignore); + /* If nIncr is less than zero, then check at runtime if there are any ** outstanding constraints to resolve. If there are not, there is no need ** to check if deleting this row resolves any outstanding violations. @@ -107500,10 +112416,12 @@ static void fkScanChildren( /* Create VDBE to loop through the entries in pSrc that match the WHERE ** clause. For each row found, increment either the deferred or immediate ** foreign key constraint counter. */ - pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0, 0, 0); - sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); - if( pWInfo ){ - sqlite3WhereEnd(pWInfo); + if( pParse->nErr==0 ){ + pWInfo = sqlite3WhereBegin(pParse, pSrc, pWhere, 0, 0, 0, 0); + sqlite3VdbeAddOp2(v, OP_FkCounter, pFKey->isDeferred, nIncr); + if( pWInfo ){ + sqlite3WhereEnd(pWInfo); + } } /* Clean up the WHERE clause constructed above. */ @@ -107590,7 +112508,7 @@ SQLITE_PRIVATE void sqlite3FkDropTable(Parse *pParse, SrcList *pName, Table *pTa } pParse->disableTriggers = 1; - sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0); + sqlite3DeleteFrom(pParse, sqlite3SrcListDup(db, pName, 0), 0, 0, 0); pParse->disableTriggers = 0; /* If the DELETE has generated immediate foreign key constraint @@ -107603,6 +112521,7 @@ SQLITE_PRIVATE void sqlite3FkDropTable(Parse *pParse, SrcList *pName, Table *pTa ** constraints are violated. */ if( (db->flags & SQLITE_DeferFKs)==0 ){ + sqlite3VdbeVerifyAbortable(v, OE_Abort); sqlite3VdbeAddOp2(v, OP_FkIfZero, 0, sqlite3VdbeCurrentAddr(v)+2); VdbeCoverage(v); sqlite3HaltConstraint(pParse, SQLITE_CONSTRAINT_FOREIGNKEY, @@ -107954,8 +112873,16 @@ SQLITE_PRIVATE u32 sqlite3FkOldmask( ** UPDATE statement modifies the rowid fields of the table. ** ** If any foreign key processing will be required, this function returns -** true. If there is no foreign key related processing, this function -** returns false. +** non-zero. If there is no foreign key related processing, this function +** returns zero. +** +** For an UPDATE, this function returns 2 if: +** +** * There are any FKs for which pTab is the child and the parent table, or +** * the UPDATE modifies one or more parent keys for which the action is +** not "NO ACTION" (i.e. is CASCADE, SET DEFAULT or SET NULL). +** +** Or, assuming some other foreign key processing is required, 1. */ SQLITE_PRIVATE int sqlite3FkRequired( Parse *pParse, /* Parse context */ @@ -107963,12 +112890,13 @@ SQLITE_PRIVATE int sqlite3FkRequired( int *aChange, /* Non-NULL for UPDATE operations */ int chngRowid /* True for UPDATE that affects rowid */ ){ + int eRet = 0; if( pParse->db->flags&SQLITE_ForeignKeys ){ if( !aChange ){ /* A DELETE operation. Foreign key processing is required if the ** table in question is either the child or parent table for any ** foreign key constraint. */ - return (sqlite3FkReferences(pTab) || pTab->pFKey); + eRet = (sqlite3FkReferences(pTab) || pTab->pFKey); }else{ /* This is an UPDATE. Foreign key processing is only required if the ** operation modifies one or more child or parent key columns. */ @@ -107976,16 +112904,22 @@ SQLITE_PRIVATE int sqlite3FkRequired( /* Check if any child key columns are being modified. */ for(p=pTab->pFKey; p; p=p->pNextFrom){ - if( fkChildIsModified(pTab, p, aChange, chngRowid) ) return 1; + if( 0==sqlite3_stricmp(pTab->zName, p->zTo) ) return 2; + if( fkChildIsModified(pTab, p, aChange, chngRowid) ){ + eRet = 1; + } } /* Check if any parent key columns are being modified. */ for(p=sqlite3FkReferences(pTab); p; p=p->pNextTo){ - if( fkParentIsModified(pTab, p, aChange, chngRowid) ) return 1; + if( fkParentIsModified(pTab, p, aChange, chngRowid) ){ + if( p->aAction[1]!=OE_None ) return 2; + eRet = 1; + } } } } - return 0; + return eRet; } /* @@ -108133,7 +113067,7 @@ static Trigger *fkActionTrigger( sqlite3ExprListAppend(pParse, 0, pRaise), sqlite3SrcListAppend(db, 0, &tFrom, 0), pWhere, - 0, 0, 0, 0, 0, 0 + 0, 0, 0, 0, 0 ); pWhere = 0; } @@ -108484,11 +113418,12 @@ static int readsTable(Parse *p, int iDb, Table *pTab){ ** first use of table pTab. On 2nd and subsequent uses, the original ** AutoincInfo structure is used. ** -** Three memory locations are allocated: +** Four consecutive registers are allocated: ** -** (1) Register to hold the name of the pTab table. -** (2) Register to hold the maximum ROWID of pTab. -** (3) Register to hold the rowid in sqlite_sequence of pTab +** (1) The name of the pTab table. +** (2) The maximum ROWID of pTab. +** (3) The rowid in sqlite_sequence of pTab +** (4) The original value of the max ROWID in pTab, or NULL if none ** ** The 2nd register is the one that is returned. That is all the ** insert routine needs to know about. @@ -108499,11 +113434,26 @@ static int autoIncBegin( Table *pTab /* The table we are writing to */ ){ int memId = 0; /* Register holding maximum rowid */ + assert( pParse->db->aDb[iDb].pSchema!=0 ); if( (pTab->tabFlags & TF_Autoincrement)!=0 - && (pParse->db->flags & SQLITE_Vacuum)==0 + && (pParse->db->mDbFlags & DBFLAG_Vacuum)==0 ){ Parse *pToplevel = sqlite3ParseToplevel(pParse); AutoincInfo *pInfo; + Table *pSeqTab = pParse->db->aDb[iDb].pSchema->pSeqTab; + + /* Verify that the sqlite_sequence table exists and is an ordinary + ** rowid table with exactly two columns. + ** Ticket d8dc2b3a58cd5dc2918a1d4acb 2018-05-23 */ + if( pSeqTab==0 + || !HasRowid(pSeqTab) + || IsVirtual(pSeqTab) + || pSeqTab->nCol!=2 + ){ + pParse->nErr++; + pParse->rc = SQLITE_CORRUPT_SEQUENCE; + return 0; + } pInfo = pToplevel->pAinc; while( pInfo && pInfo->pTab!=pTab ){ pInfo = pInfo->pNext; } @@ -108516,7 +113466,7 @@ static int autoIncBegin( pInfo->iDb = iDb; pToplevel->nMem++; /* Register to hold name of table */ pInfo->regCtr = ++pToplevel->nMem; /* Max rowid register */ - pToplevel->nMem++; /* Rowid in sqlite_sequence */ + pToplevel->nMem +=2; /* Rowid in sqlite_sequence + orig max val */ } memId = pInfo->regCtr; } @@ -108544,15 +113494,17 @@ SQLITE_PRIVATE void sqlite3AutoincrementBegin(Parse *pParse){ static const int iLn = VDBE_OFFSET_LINENO(2); static const VdbeOpList autoInc[] = { /* 0 */ {OP_Null, 0, 0, 0}, - /* 1 */ {OP_Rewind, 0, 9, 0}, + /* 1 */ {OP_Rewind, 0, 10, 0}, /* 2 */ {OP_Column, 0, 0, 0}, - /* 3 */ {OP_Ne, 0, 7, 0}, + /* 3 */ {OP_Ne, 0, 9, 0}, /* 4 */ {OP_Rowid, 0, 0, 0}, /* 5 */ {OP_Column, 0, 1, 0}, - /* 6 */ {OP_Goto, 0, 9, 0}, - /* 7 */ {OP_Next, 0, 2, 0}, - /* 8 */ {OP_Integer, 0, 0, 0}, - /* 9 */ {OP_Close, 0, 0, 0} + /* 6 */ {OP_AddImm, 0, 0, 0}, + /* 7 */ {OP_Copy, 0, 0, 0}, + /* 8 */ {OP_Goto, 0, 11, 0}, + /* 9 */ {OP_Next, 0, 2, 0}, + /* 10 */ {OP_Integer, 0, 0, 0}, + /* 11 */ {OP_Close, 0, 0, 0} }; VdbeOp *aOp; pDb = &db->aDb[p->iDb]; @@ -108563,14 +113515,17 @@ SQLITE_PRIVATE void sqlite3AutoincrementBegin(Parse *pParse){ aOp = sqlite3VdbeAddOpList(v, ArraySize(autoInc), autoInc, iLn); if( aOp==0 ) break; aOp[0].p2 = memId; - aOp[0].p3 = memId+1; + aOp[0].p3 = memId+2; aOp[2].p3 = memId; aOp[3].p1 = memId-1; aOp[3].p3 = memId; aOp[3].p5 = SQLITE_JUMPIFNULL; aOp[4].p2 = memId+1; aOp[5].p3 = memId; - aOp[8].p2 = memId; + aOp[6].p1 = memId; + aOp[7].p2 = memId+2; + aOp[7].p1 = memId; + aOp[10].p2 = memId; } } @@ -108617,6 +113572,8 @@ static SQLITE_NOINLINE void autoIncrementEnd(Parse *pParse){ iRec = sqlite3GetTempReg(pParse); assert( sqlite3SchemaMutexHeld(db, 0, pDb->pSchema) ); + sqlite3VdbeAddOp3(v, OP_Le, memId+2, sqlite3VdbeCurrentAddr(v)+7, memId); + VdbeCoverage(v); sqlite3OpenTable(pParse, 0, p->iDb, pDb->pSchema->pSeqTab, OP_OpenWrite); aOp = sqlite3VdbeAddOpList(v, ArraySize(autoIncEnd), autoIncEnd, iLn); if( aOp==0 ) break; @@ -108754,11 +113711,11 @@ SQLITE_PRIVATE void sqlite3Insert( SrcList *pTabList, /* Name of table into which we are inserting */ Select *pSelect, /* A SELECT statement to use as the data source */ IdList *pColumn, /* Column names corresponding to IDLIST. */ - int onError /* How to handle constraint errors */ + int onError, /* How to handle constraint errors */ + Upsert *pUpsert /* ON CONFLICT clauses for upsert, or NULL */ ){ sqlite3 *db; /* The main database structure */ Table *pTab; /* The table to insert into. aka TABLE */ - char *zTab; /* Name of the table into which we are inserting */ int i, j; /* Loop counters */ Vdbe *v; /* Generate code into this virtual machine */ Index *pIdx; /* For looping over indices of the table */ @@ -108795,10 +113752,10 @@ SQLITE_PRIVATE void sqlite3Insert( #endif db = pParse->db; - memset(&dest, 0, sizeof(dest)); if( pParse->nErr || db->mallocFailed ){ goto insert_cleanup; } + dest.iSDParm = 0; /* Suppress a harmless compiler warning */ /* If the Select object is really just a simple VALUES() list with a ** single row (the common case) then keep that one row of values @@ -108814,8 +113771,6 @@ SQLITE_PRIVATE void sqlite3Insert( /* Locate the table into which we will be inserting new information. */ assert( pTabList->nSrc==1 ); - zTab = pTabList->a[0].zName; - if( NEVER(zTab==0) ) goto insert_cleanup; pTab = sqlite3SrcListLookup(pParse, pTabList); if( pTab==0 ){ goto insert_cleanup; @@ -109052,7 +114007,10 @@ SQLITE_PRIVATE void sqlite3Insert( /* Initialize the count of rows to be inserted */ - if( db->flags & SQLITE_CountRows ){ + if( (db->flags & SQLITE_CountRows)!=0 + && !pParse->nested + && !pParse->pTriggerTab + ){ regRowCount = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); } @@ -109072,6 +114030,19 @@ SQLITE_PRIVATE void sqlite3Insert( pParse->nMem += pIdx->nColumn; } } +#ifndef SQLITE_OMIT_UPSERT + if( pUpsert ){ + pTabList->a[0].iCursor = iDataCur; + pUpsert->pUpsertSrc = pTabList; + pUpsert->regData = regData; + pUpsert->iDataCur = iDataCur; + pUpsert->iIdxCur = iIdxCur; + if( pUpsert->pUpsertTarget ){ + sqlite3UpsertAnalyzeTarget(pParse, pTabList, pUpsert); + } + } +#endif + /* This is the top of the main insertion loop */ if( useTempTable ){ @@ -109186,7 +114157,8 @@ SQLITE_PRIVATE void sqlite3Insert( VdbeOp *pOp; sqlite3ExprCode(pParse, pList->a[ipkColumn].pExpr, regRowid); pOp = sqlite3VdbeGetOp(v, -1); - if( ALWAYS(pOp) && pOp->opcode==OP_Null && !IsVirtual(pTab) ){ + assert( pOp!=0 ); + if( pOp->opcode==OP_Null && !IsVirtual(pTab) ){ appendFlag = 1; pOp->opcode = OP_NewRowid; pOp->p1 = iDataCur; @@ -109273,7 +114245,7 @@ SQLITE_PRIVATE void sqlite3Insert( int isReplace; /* Set to true if constraints may cause a replace */ int bUseSeek; /* True to use OPFLAG_SEEKRESULT */ sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, - regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace, 0 + regIns, 0, ipkColumn>=0, onError, endOfLoop, &isReplace, 0, pUpsert ); sqlite3FkCheck(pParse, pTab, 0, regIns, 0, 0); @@ -109296,7 +114268,7 @@ SQLITE_PRIVATE void sqlite3Insert( /* Update the count of rows that are inserted */ - if( (db->flags & SQLITE_CountRows)!=0 ){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); } @@ -109333,7 +114305,7 @@ insert_end: ** generating code because of a call to sqlite3NestedParse(), do not ** invoke the callback function. */ - if( (db->flags&SQLITE_CountRows) && !pParse->nested && !pParse->pTriggerTab ){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); sqlite3VdbeSetNumCols(v, 1); sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows inserted", SQLITE_STATIC); @@ -109342,6 +114314,7 @@ insert_end: insert_cleanup: sqlite3SrcListDelete(db, pTabList); sqlite3ExprListDelete(db, pList); + sqlite3UpsertDelete(db, pUpsert); sqlite3SelectDelete(db, pSelect); sqlite3IdListDelete(db, pColumn); sqlite3DbFree(db, aRegIdx); @@ -109414,6 +114387,44 @@ static int checkConstraintUnchanged(Expr *pExpr, int *aiChng, int chngRowid){ } /* +** An instance of the ConstraintAddr object remembers the byte-code addresses +** for sections of the constraint checks that deal with uniqueness constraints +** on the rowid and on the upsert constraint. +** +** This information is passed into checkReorderConstraintChecks() to insert +** some OP_Goto operations so that the rowid and upsert constraints occur +** in the correct order relative to other constraints. +*/ +typedef struct ConstraintAddr ConstraintAddr; +struct ConstraintAddr { + int ipkTop; /* Subroutine for rowid constraint check */ + int upsertTop; /* Label for upsert constraint check subroutine */ + int upsertTop2; /* Copy of upsertTop not cleared by the call */ + int upsertBtm; /* upsert constraint returns to this label */ + int ipkBtm; /* Return opcode rowid constraint check */ +}; + +/* +** Generate any OP_Goto operations needed to cause constraints to be +** run that haven't already been run. +*/ +static void reorderConstraintChecks(Vdbe *v, ConstraintAddr *p){ + if( p->upsertTop ){ + testcase( sqlite3VdbeLabelHasBeenResolved(v, p->upsertTop) ); + sqlite3VdbeGoto(v, p->upsertTop); + VdbeComment((v, "call upsert subroutine")); + sqlite3VdbeResolveLabel(v, p->upsertBtm); + p->upsertTop = 0; + } + if( p->ipkTop ){ + sqlite3VdbeGoto(v, p->ipkTop); + VdbeComment((v, "call rowid unique-check subroutine")); + sqlite3VdbeJumpHere(v, p->ipkBtm); + p->ipkTop = 0; + } +} + +/* ** Generate code to do constraint checks prior to an INSERT or an UPDATE ** on table pTab. ** @@ -109508,7 +114519,8 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( u8 overrideError, /* Override onError to this if not OE_Default */ int ignoreDest, /* Jump to this label on an OE_Ignore resolution */ int *pbMayReplace, /* OUT: Set to true if constraint may cause a replace */ - int *aiChng /* column i is unchanged if aiChng[i]<0 */ + int *aiChng, /* column i is unchanged if aiChng[i]<0 */ + Upsert *pUpsert /* ON CONFLICT clauses, if any. NULL otherwise */ ){ Vdbe *v; /* VDBE under constrution */ Index *pIdx; /* Pointer to one of the indices */ @@ -109521,10 +114533,11 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( int addr1; /* Address of jump instruction */ int seenReplace = 0; /* True if REPLACE is used to resolve INT PK conflict */ int nPkField; /* Number of fields in PRIMARY KEY. 1 for ROWID tables */ - int ipkTop = 0; /* Top of the rowid change constraint check */ - int ipkBottom = 0; /* Bottom of the rowid change constraint check */ + ConstraintAddr sAddr;/* Address information for constraint reordering */ + Index *pUpIdx = 0; /* Index to which to apply the upsert */ u8 isUpdate; /* True if this is an UPDATE operation */ u8 bAffinityDone = 0; /* True if the OP_Affinity operation has been run */ + int upsertBypass = 0; /* Address of Goto to bypass upsert subroutine */ isUpdate = regOldData!=0; db = pParse->db; @@ -109532,6 +114545,7 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( assert( v!=0 ); assert( pTab->pSelect==0 ); /* This table is not a VIEW */ nCol = pTab->nCol; + memset(&sAddr, 0, sizeof(sAddr)); /* pPk is the PRIMARY KEY index for WITHOUT ROWID tables and NULL for ** normal rowid tables. nPkField is the number of key fields in the @@ -109607,13 +114621,14 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( #ifndef SQLITE_OMIT_CHECK if( pTab->pCheck && (db->flags & SQLITE_IgnoreChecks)==0 ){ ExprList *pCheck = pTab->pCheck; - pParse->ckBase = regNewData+1; + pParse->iSelfTab = -(regNewData+1); onError = overrideError!=OE_Default ? overrideError : OE_Abort; for(i=0; i<pCheck->nExpr; i++){ int allOk; Expr *pExpr = pCheck->a[i].pExpr; if( aiChng && checkConstraintUnchanged(pExpr, aiChng, pkChng) ) continue; allOk = sqlite3VdbeMakeLabel(v); + sqlite3VdbeVerifyAbortable(v, onError); sqlite3ExprIfTrue(pParse, pExpr, allOk, SQLITE_JUMPIFNULL); if( onError==OE_Ignore ){ sqlite3VdbeGoto(v, ignoreDest); @@ -109627,9 +114642,50 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( } sqlite3VdbeResolveLabel(v, allOk); } + pParse->iSelfTab = 0; } #endif /* !defined(SQLITE_OMIT_CHECK) */ + /* UNIQUE and PRIMARY KEY constraints should be handled in the following + ** order: + ** + ** (1) OE_Abort, OE_Fail, OE_Rollback, OE_Ignore + ** (2) OE_Update + ** (3) OE_Replace + ** + ** OE_Fail and OE_Ignore must happen before any changes are made. + ** OE_Update guarantees that only a single row will change, so it + ** must happen before OE_Replace. Technically, OE_Abort and OE_Rollback + ** could happen in any order, but they are grouped up front for + ** convenience. + ** + ** Constraint checking code is generated in this order: + ** (A) The rowid constraint + ** (B) Unique index constraints that do not have OE_Replace as their + ** default conflict resolution strategy + ** (C) Unique index that do use OE_Replace by default. + ** + ** The ordering of (2) and (3) is accomplished by making sure the linked + ** list of indexes attached to a table puts all OE_Replace indexes last + ** in the list. See sqlite3CreateIndex() for where that happens. + */ + + if( pUpsert ){ + if( pUpsert->pUpsertTarget==0 ){ + /* An ON CONFLICT DO NOTHING clause, without a constraint-target. + ** Make all unique constraint resolution be OE_Ignore */ + assert( pUpsert->pUpsertSet==0 ); + overrideError = OE_Ignore; + pUpsert = 0; + }else if( (pUpIdx = pUpsert->pUpsertIdx)!=0 ){ + /* If the constraint-target is on some column other than + ** then ROWID, then we might need to move the UPSERT around + ** so that it occurs in the correct order. */ + sAddr.upsertTop = sAddr.upsertTop2 = sqlite3VdbeMakeLabel(v); + sAddr.upsertBtm = sqlite3VdbeMakeLabel(v); + } + } + /* If rowid is changing, make sure the new rowid does not previously ** exist in the table. */ @@ -109644,13 +114700,13 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( onError = OE_Abort; } - if( isUpdate ){ - /* pkChng!=0 does not mean that the rowid has changed, only that - ** it might have changed. Skip the conflict logic below if the rowid - ** is unchanged. */ - sqlite3VdbeAddOp3(v, OP_Eq, regNewData, addrRowidOk, regOldData); - sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); - VdbeCoverage(v); + /* figure out whether or not upsert applies in this case */ + if( pUpsert && pUpsert->pUpsertIdx==0 ){ + if( pUpsert->pUpsertSet==0 ){ + onError = OE_Ignore; /* DO NOTHING is the same as INSERT OR IGNORE */ + }else{ + onError = OE_Update; /* DO UPDATE */ + } } /* If the response to a rowid conflict is REPLACE but the response @@ -109658,21 +114714,34 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( ** to defer the running of the rowid conflict checking until after ** the UNIQUE constraints have run. */ - if( onError==OE_Replace && overrideError!=OE_Replace ){ - for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->onError==OE_Ignore || pIdx->onError==OE_Fail ){ - ipkTop = sqlite3VdbeAddOp0(v, OP_Goto); - break; - } - } + assert( OE_Update>OE_Replace ); + assert( OE_Ignore<OE_Replace ); + assert( OE_Fail<OE_Replace ); + assert( OE_Abort<OE_Replace ); + assert( OE_Rollback<OE_Replace ); + if( onError>=OE_Replace + && (pUpsert || onError!=overrideError) + && pTab->pIndex + ){ + sAddr.ipkTop = sqlite3VdbeAddOp0(v, OP_Goto)+1; + } + + if( isUpdate ){ + /* pkChng!=0 does not mean that the rowid has changed, only that + ** it might have changed. Skip the conflict logic below if the rowid + ** is unchanged. */ + sqlite3VdbeAddOp3(v, OP_Eq, regNewData, addrRowidOk, regOldData); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); + VdbeCoverage(v); } /* Check to see if the new rowid already exists in the table. Skip ** the following conflict logic if it does not. */ + VdbeNoopComment((v, "uniqueness check for ROWID")); + sqlite3VdbeVerifyAbortable(v, onError); sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, addrRowidOk, regNewData); VdbeCoverage(v); - /* Generate code that deals with a rowid collision */ switch( onError ){ default: { onError = OE_Abort; @@ -109681,6 +114750,9 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( case OE_Rollback: case OE_Abort: case OE_Fail: { + testcase( onError==OE_Rollback ); + testcase( onError==OE_Abort ); + testcase( onError==OE_Fail ); sqlite3RowidConstraint(pParse, onError, pTab); break; } @@ -109717,14 +114789,13 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( regNewData, 1, 0, OE_Replace, 1, -1); }else{ #ifdef SQLITE_ENABLE_PREUPDATE_HOOK - if( HasRowid(pTab) ){ - /* This OP_Delete opcode fires the pre-update-hook only. It does - ** not modify the b-tree. It is more efficient to let the coming - ** OP_Insert replace the existing entry than it is to delete the - ** existing entry and then insert a new one. */ - sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, OPFLAG_ISNOOP); - sqlite3VdbeAppendP4(v, pTab, P4_TABLE); - } + assert( HasRowid(pTab) ); + /* This OP_Delete opcode fires the pre-update-hook only. It does + ** not modify the b-tree. It is more efficient to let the coming + ** OP_Insert replace the existing entry than it is to delete the + ** existing entry and then insert a new one. */ + sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, OPFLAG_ISNOOP); + sqlite3VdbeAppendP4(v, pTab, P4_TABLE); #endif /* SQLITE_ENABLE_PREUPDATE_HOOK */ if( pTab->pIndex ){ sqlite3MultiWrite(pParse); @@ -109734,16 +114805,22 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( seenReplace = 1; break; } +#ifndef SQLITE_OMIT_UPSERT + case OE_Update: { + sqlite3UpsertDoUpdate(pParse, pUpsert, pTab, 0, iDataCur); + /* Fall through */ + } +#endif case OE_Ignore: { - /*assert( seenReplace==0 );*/ + testcase( onError==OE_Ignore ); sqlite3VdbeGoto(v, ignoreDest); break; } } sqlite3VdbeResolveLabel(v, addrRowidOk); - if( ipkTop ){ - ipkBottom = sqlite3VdbeAddOp0(v, OP_Goto); - sqlite3VdbeJumpHere(v, ipkTop); + if( sAddr.ipkTop ){ + sAddr.ipkBtm = sqlite3VdbeAddOp0(v, OP_Goto); + sqlite3VdbeJumpHere(v, sAddr.ipkTop-1); } } @@ -109761,20 +114838,29 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( int addrUniqueOk; /* Jump here if the UNIQUE constraint is satisfied */ if( aRegIdx[ix]==0 ) continue; /* Skip indices that do not change */ + if( pUpIdx==pIdx ){ + addrUniqueOk = sAddr.upsertBtm; + upsertBypass = sqlite3VdbeGoto(v, 0); + VdbeComment((v, "Skip upsert subroutine")); + sqlite3VdbeResolveLabel(v, sAddr.upsertTop2); + }else{ + addrUniqueOk = sqlite3VdbeMakeLabel(v); + } + VdbeNoopComment((v, "uniqueness check for %s", pIdx->zName)); if( bAffinityDone==0 ){ sqlite3TableAffinity(v, pTab, regNewData+1); bAffinityDone = 1; } iThisCur = iIdxCur+ix; - addrUniqueOk = sqlite3VdbeMakeLabel(v); + /* Skip partial indices for which the WHERE clause is not true */ if( pIdx->pPartIdxWhere ){ sqlite3VdbeAddOp2(v, OP_Null, 0, aRegIdx[ix]); - pParse->ckBase = regNewData+1; + pParse->iSelfTab = -(regNewData+1); sqlite3ExprIfFalseDup(pParse, pIdx->pPartIdxWhere, addrUniqueOk, SQLITE_JUMPIFNULL); - pParse->ckBase = 0; + pParse->iSelfTab = 0; } /* Create a record for this index entry as it should appear after @@ -109785,9 +114871,9 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( int iField = pIdx->aiColumn[i]; int x; if( iField==XN_EXPR ){ - pParse->ckBase = regNewData+1; + pParse->iSelfTab = -(regNewData+1); sqlite3ExprCodeCopy(pParse, pIdx->aColExpr->a[i].pExpr, regIdx+i); - pParse->ckBase = 0; + pParse->iSelfTab = 0; VdbeComment((v, "%s column %d", pIdx->zName, i)); }else{ if( iField==XN_ROWID || iField==pTab->iPKey ){ @@ -109801,6 +114887,9 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( } sqlite3VdbeAddOp3(v, OP_MakeRecord, regIdx, pIdx->nColumn, aRegIdx[ix]); VdbeComment((v, "for %s", pIdx->zName)); +#ifdef SQLITE_ENABLE_NULL_TRIM + if( pIdx->idxType==2 ) sqlite3SetMakeRecordP5(v, pIdx->pTable); +#endif /* In an UPDATE operation, if this index is the PRIMARY KEY index ** of a WITHOUT ROWID table and there has been no change the @@ -109823,6 +114912,24 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( onError = OE_Abort; } + /* Figure out if the upsert clause applies to this index */ + if( pUpIdx==pIdx ){ + if( pUpsert->pUpsertSet==0 ){ + onError = OE_Ignore; /* DO NOTHING is the same as INSERT OR IGNORE */ + }else{ + onError = OE_Update; /* DO UPDATE */ + } + } + + /* Invoke subroutines to handle IPK replace and upsert prior to running + ** the first REPLACE constraint check. */ + if( onError==OE_Replace ){ + testcase( sAddr.ipkTop ); + testcase( sAddr.upsertTop + && sqlite3VdbeLabelHasBeenResolved(v,sAddr.upsertTop) ); + reorderConstraintChecks(v, &sAddr); + } + /* Collision detection may be omitted if all of the following are true: ** (1) The conflict resolution algorithm is REPLACE ** (2) The table is a WITHOUT ROWID table @@ -109843,6 +114950,8 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( } /* Check to see if the new index entry will be unique */ + sqlite3ExprCachePush(pParse); + sqlite3VdbeVerifyAbortable(v, onError); sqlite3VdbeAddOp4Int(v, OP_NoConflict, iThisCur, addrUniqueOk, regIdx, pIdx->nKeyCol); VdbeCoverage(v); @@ -109904,25 +115013,37 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( /* Generate code that executes if the new index entry is not unique */ assert( onError==OE_Rollback || onError==OE_Abort || onError==OE_Fail - || onError==OE_Ignore || onError==OE_Replace ); + || onError==OE_Ignore || onError==OE_Replace || onError==OE_Update ); switch( onError ){ case OE_Rollback: case OE_Abort: case OE_Fail: { + testcase( onError==OE_Rollback ); + testcase( onError==OE_Abort ); + testcase( onError==OE_Fail ); sqlite3UniqueConstraint(pParse, onError, pIdx); break; } +#ifndef SQLITE_OMIT_UPSERT + case OE_Update: { + sqlite3UpsertDoUpdate(pParse, pUpsert, pTab, pIdx, iIdxCur+ix); + /* Fall through */ + } +#endif case OE_Ignore: { + testcase( onError==OE_Ignore ); sqlite3VdbeGoto(v, ignoreDest); break; } default: { Trigger *pTrigger = 0; assert( onError==OE_Replace ); - sqlite3MultiWrite(pParse); if( db->flags&SQLITE_RecTriggers ){ pTrigger = sqlite3TriggersExist(pParse, pTab, TK_DELETE, 0, 0); } + if( pTrigger || sqlite3FkRequired(pParse, pTab, 0, 0) ){ + sqlite3MultiWrite(pParse); + } sqlite3GenerateRowDelete(pParse, pTab, pTrigger, iDataCur, iIdxCur, regR, nPkField, 0, OE_Replace, (pIdx==pPk ? ONEPASS_SINGLE : ONEPASS_OFF), iThisCur); @@ -109930,13 +115051,19 @@ SQLITE_PRIVATE void sqlite3GenerateConstraintChecks( break; } } - sqlite3VdbeResolveLabel(v, addrUniqueOk); + if( pUpIdx==pIdx ){ + sqlite3VdbeJumpHere(v, upsertBypass); + }else{ + sqlite3VdbeResolveLabel(v, addrUniqueOk); + } + sqlite3ExprCachePop(pParse); if( regR!=regIdx ) sqlite3ReleaseTempRange(pParse, regR, nPkField); + } - if( ipkTop ){ - sqlite3VdbeGoto(v, ipkTop+1); - sqlite3VdbeJumpHere(v, ipkBottom); - } + testcase( sAddr.ipkTop!=0 ); + testcase( sAddr.upsertTop + && sqlite3VdbeLabelHasBeenResolved(v,sAddr.upsertTop) ); + reorderConstraintChecks(v, &sAddr); *pbMayReplace = seenReplace; VdbeModuleComment((v, "END: GenCnstCks(%d)", seenReplace)); @@ -109956,8 +115083,11 @@ SQLITE_PRIVATE void sqlite3SetMakeRecordP5(Vdbe *v, Table *pTab){ ** version 2 and later (SQLite version 3.1.4, 2005-02-20). */ if( pTab->pSchema->file_format<2 ) return; - for(i=pTab->nCol; i>1 && pTab->aCol[i-1].pDflt==0; i--){} - sqlite3VdbeChangeP5(v, i); + for(i=pTab->nCol-1; i>0; i--){ + if( pTab->aCol[i].pDflt!=0 ) break; + if( pTab->aCol[i].colFlags & COLFLAG_PRIMKEY ) break; + } + sqlite3VdbeChangeP5(v, i+1); } #endif @@ -110166,7 +115296,7 @@ static int xferCompatibleIndex(Index *pDest, Index *pSrc){ } if( pSrc->aiColumn[i]==XN_EXPR ){ assert( pSrc->aColExpr!=0 && pDest->aColExpr!=0 ); - if( sqlite3ExprCompare(pSrc->aColExpr->a[i].pExpr, + if( sqlite3ExprCompare(0, pSrc->aColExpr->a[i].pExpr, pDest->aColExpr->a[i].pExpr, -1)!=0 ){ return 0; /* Different expressions in the index */ } @@ -110178,7 +115308,7 @@ static int xferCompatibleIndex(Index *pDest, Index *pSrc){ return 0; /* Different collating sequences */ } } - if( sqlite3ExprCompare(pSrc->pPartIdxWhere, pDest->pPartIdxWhere, -1) ){ + if( sqlite3ExprCompare(0, pSrc->pPartIdxWhere, pDest->pPartIdxWhere, -1) ){ return 0; /* Different WHERE clauses */ } @@ -110247,7 +115377,7 @@ static int xferOptimization( return 0; /* tab1 must not have triggers */ } #ifndef SQLITE_OMIT_VIRTUALTABLE - if( pDest->tabFlags & TF_Virtual ){ + if( IsVirtual(pDest) ){ return 0; /* tab1 must not be a virtual table */ } #endif @@ -110276,7 +115406,6 @@ static int xferOptimization( if( pSelect->pLimit ){ return 0; /* SELECT may not have a LIMIT clause */ } - assert( pSelect->pOffset==0 ); /* Must be so if pLimit==0 */ if( pSelect->pPrior ){ return 0; /* SELECT may not be a compound query */ } @@ -110309,7 +115438,7 @@ static int xferOptimization( return 0; /* source and destination must both be WITHOUT ROWID or not */ } #ifndef SQLITE_OMIT_VIRTUALTABLE - if( pSrc->tabFlags & TF_Virtual ){ + if( IsVirtual(pSrc) ){ return 0; /* tab2 must not be a virtual table */ } #endif @@ -110326,7 +115455,7 @@ static int xferOptimization( Column *pDestCol = &pDest->aCol[i]; Column *pSrcCol = &pSrc->aCol[i]; #ifdef SQLITE_ENABLE_HIDDEN_COLUMNS - if( (db->flags & SQLITE_Vacuum)==0 + if( (db->mDbFlags & DBFLAG_Vacuum)==0 && (pDestCol->colFlags | pSrcCol->colFlags) & COLFLAG_HIDDEN ){ return 0; /* Neither table may have __hidden__ columns */ @@ -110402,15 +115531,15 @@ static int xferOptimization( regRowid = sqlite3GetTempReg(pParse); sqlite3OpenTable(pParse, iDest, iDbDest, pDest, OP_OpenWrite); assert( HasRowid(pDest) || destHasUniqueIdx ); - if( (db->flags & SQLITE_Vacuum)==0 && ( + if( (db->mDbFlags & DBFLAG_Vacuum)==0 && ( (pDest->iPKey<0 && pDest->pIndex!=0) /* (1) */ || destHasUniqueIdx /* (2) */ || (onError!=OE_Abort && onError!=OE_Rollback) /* (3) */ )){ /* In some circumstances, we are able to run the xfer optimization ** only if the destination table is initially empty. Unless the - ** SQLITE_Vacuum flag is set, this block generates code to make - ** that determination. If SQLITE_Vacuum is set, then the destination + ** DBFLAG_Vacuum flag is set, this block generates code to make + ** that determination. If DBFLAG_Vacuum is set, then the destination ** table is always empty. ** ** Conditions under which the destination must be empty: @@ -110434,6 +115563,7 @@ static int xferOptimization( emptySrcTest = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); if( pDest->iPKey>=0 ){ addr1 = sqlite3VdbeAddOp2(v, OP_Rowid, iSrc, regRowid); + sqlite3VdbeVerifyAbortable(v, onError); addr2 = sqlite3VdbeAddOp3(v, OP_NotExists, iDest, 0, regRowid); VdbeCoverage(v); sqlite3RowidConstraint(pParse, onError, pDest); @@ -110446,8 +115576,8 @@ static int xferOptimization( assert( (pDest->tabFlags & TF_Autoincrement)==0 ); } sqlite3VdbeAddOp3(v, OP_RowData, iSrc, regData, 1); - if( db->flags & SQLITE_Vacuum ){ - sqlite3VdbeAddOp3(v, OP_Last, iDest, 0, -1); + if( db->mDbFlags & DBFLAG_Vacuum ){ + sqlite3VdbeAddOp1(v, OP_SeekEnd, iDest); insFlags = OPFLAG_NCHANGE|OPFLAG_LASTROWID| OPFLAG_APPEND|OPFLAG_USESEEKRESULT; }else{ @@ -110478,13 +115608,13 @@ static int xferOptimization( VdbeComment((v, "%s", pDestIdx->zName)); addr1 = sqlite3VdbeAddOp2(v, OP_Rewind, iSrc, 0); VdbeCoverage(v); sqlite3VdbeAddOp3(v, OP_RowData, iSrc, regData, 1); - if( db->flags & SQLITE_Vacuum ){ + if( db->mDbFlags & DBFLAG_Vacuum ){ /* This INSERT command is part of a VACUUM operation, which guarantees ** that the destination table is empty. If all indexed columns use ** collation sequence BINARY, then it can also be assumed that the ** index will be populated by inserting keys in strictly sorted ** order. In this case, instead of seeking within the b-tree as part - ** of every OP_IdxInsert opcode, an OP_Last is added before the + ** of every OP_IdxInsert opcode, an OP_SeekEnd is added before the ** OP_IdxInsert to seek to the point within the b-tree where each key ** should be inserted. This is faster. ** @@ -110495,13 +115625,11 @@ static int xferOptimization( ** sorted order. */ for(i=0; i<pSrcIdx->nColumn; i++){ const char *zColl = pSrcIdx->azColl[i]; - assert( sqlite3_stricmp(sqlite3StrBINARY, zColl)!=0 - || sqlite3StrBINARY==zColl ); if( sqlite3_stricmp(sqlite3StrBINARY, zColl) ) break; } if( i==pSrcIdx->nColumn ){ idxInsFlags = OPFLAG_USESEEKRESULT; - sqlite3VdbeAddOp3(v, OP_Last, iDest, 0, -1); + sqlite3VdbeAddOp1(v, OP_SeekEnd, iDest); } } if( !HasRowid(pSrc) && pDestIdx->idxType==2 ){ @@ -110606,7 +115734,7 @@ SQLITE_API int sqlite3_exec( (SQLITE_DONE==rc && !callbackIsInit && db->flags&SQLITE_NullCallback)) ){ if( !callbackIsInit ){ - azCols = sqlite3DbMallocZero(db, 2*nCol*sizeof(const char*) + 1); + azCols = sqlite3DbMallocRaw(db, (2*nCol+1)*sizeof(const char*)); if( azCols==0 ){ goto exec_out; } @@ -110627,6 +115755,7 @@ SQLITE_API int sqlite3_exec( goto exec_out; } } + azVals[i] = 0; } if( xCallback(pArg, nCol, azVals, azCols) ){ /* EVIDENCE-OF: R-38229-40159 If the callback function to @@ -110659,11 +115788,8 @@ exec_out: rc = sqlite3ApiExit(db, rc); if( rc!=SQLITE_OK && pzErrMsg ){ - int nErrMsg = 1 + sqlite3Strlen30(sqlite3_errmsg(db)); - *pzErrMsg = sqlite3Malloc(nErrMsg); - if( *pzErrMsg ){ - memcpy(*pzErrMsg, sqlite3_errmsg(db), nErrMsg); - }else{ + *pzErrMsg = sqlite3DbStrDup(0, sqlite3_errmsg(db)); + if( *pzErrMsg==0 ){ rc = SQLITE_NOMEM_BKPT; sqlite3Error(db, SQLITE_NOMEM); } @@ -110834,7 +115960,7 @@ struct sqlite3_api_routines { int (*set_authorizer)(sqlite3*,int(*)(void*,int,const char*,const char*, const char*,const char*),void*); void (*set_auxdata)(sqlite3_context*,int,void*,void (*)(void*)); - char * (*snprintf)(int,char*,const char*,...); + char * (*xsnprintf)(int,char*,const char*,...); int (*step)(sqlite3_stmt*); int (*table_column_metadata)(sqlite3*,const char*,const char*,const char*, char const**,char const**,int*,int*,int*); @@ -110946,7 +116072,7 @@ struct sqlite3_api_routines { int (*uri_boolean)(const char*,const char*,int); sqlite3_int64 (*uri_int64)(const char*,const char*,sqlite3_int64); const char *(*uri_parameter)(const char*,const char*); - char *(*vsnprintf)(int,char*,const char*,va_list); + char *(*xvsnprintf)(int,char*,const char*,va_list); int (*wal_checkpoint_v2)(sqlite3*,const char*,int,int*,int*); /* Version 3.8.7 and later */ int (*auto_extension)(void(*)(void)); @@ -110982,6 +116108,34 @@ struct sqlite3_api_routines { /* Version 3.14.0 and later */ int (*trace_v2)(sqlite3*,unsigned,int(*)(unsigned,void*,void*,void*),void*); char *(*expanded_sql)(sqlite3_stmt*); + /* Version 3.18.0 and later */ + void (*set_last_insert_rowid)(sqlite3*,sqlite3_int64); + /* Version 3.20.0 and later */ + int (*prepare_v3)(sqlite3*,const char*,int,unsigned int, + sqlite3_stmt**,const char**); + int (*prepare16_v3)(sqlite3*,const void*,int,unsigned int, + sqlite3_stmt**,const void**); + int (*bind_pointer)(sqlite3_stmt*,int,void*,const char*,void(*)(void*)); + void (*result_pointer)(sqlite3_context*,void*,const char*,void(*)(void*)); + void *(*value_pointer)(sqlite3_value*,const char*); + int (*vtab_nochange)(sqlite3_context*); + int (*value_nochange)(sqlite3_value*); + const char *(*vtab_collation)(sqlite3_index_info*,int); + /* Version 3.24.0 and later */ + int (*keyword_count)(void); + int (*keyword_name)(int,const char**,int*); + int (*keyword_check)(const char*,int); + sqlite3_str *(*str_new)(sqlite3*); + char *(*str_finish)(sqlite3_str*); + void (*str_appendf)(sqlite3_str*, const char *zFormat, ...); + void (*str_vappendf)(sqlite3_str*, const char *zFormat, va_list); + void (*str_append)(sqlite3_str*, const char *zIn, int N); + void (*str_appendall)(sqlite3_str*, const char *zIn); + void (*str_appendchar)(sqlite3_str*, int N, char C); + void (*str_reset)(sqlite3_str*); + int (*str_errcode)(sqlite3_str*); + int (*str_length)(sqlite3_str*); + char *(*str_value)(sqlite3_str*); }; /* @@ -111108,7 +116262,7 @@ typedef int (*sqlite3_loadext_entry)( #define sqlite3_rollback_hook sqlite3_api->rollback_hook #define sqlite3_set_authorizer sqlite3_api->set_authorizer #define sqlite3_set_auxdata sqlite3_api->set_auxdata -#define sqlite3_snprintf sqlite3_api->snprintf +#define sqlite3_snprintf sqlite3_api->xsnprintf #define sqlite3_step sqlite3_api->step #define sqlite3_table_column_metadata sqlite3_api->table_column_metadata #define sqlite3_thread_cleanup sqlite3_api->thread_cleanup @@ -111132,7 +116286,7 @@ typedef int (*sqlite3_loadext_entry)( #define sqlite3_value_text16le sqlite3_api->value_text16le #define sqlite3_value_type sqlite3_api->value_type #define sqlite3_vmprintf sqlite3_api->vmprintf -#define sqlite3_vsnprintf sqlite3_api->vsnprintf +#define sqlite3_vsnprintf sqlite3_api->xvsnprintf #define sqlite3_overload_function sqlite3_api->overload_function #define sqlite3_prepare_v2 sqlite3_api->prepare_v2 #define sqlite3_prepare16_v2 sqlite3_api->prepare16_v2 @@ -111208,7 +116362,7 @@ typedef int (*sqlite3_loadext_entry)( #define sqlite3_uri_boolean sqlite3_api->uri_boolean #define sqlite3_uri_int64 sqlite3_api->uri_int64 #define sqlite3_uri_parameter sqlite3_api->uri_parameter -#define sqlite3_uri_vsnprintf sqlite3_api->vsnprintf +#define sqlite3_uri_vsnprintf sqlite3_api->xvsnprintf #define sqlite3_wal_checkpoint_v2 sqlite3_api->wal_checkpoint_v2 /* Version 3.8.7 and later */ #define sqlite3_auto_extension sqlite3_api->auto_extension @@ -111240,6 +116394,33 @@ typedef int (*sqlite3_loadext_entry)( /* Version 3.14.0 and later */ #define sqlite3_trace_v2 sqlite3_api->trace_v2 #define sqlite3_expanded_sql sqlite3_api->expanded_sql +/* Version 3.18.0 and later */ +#define sqlite3_set_last_insert_rowid sqlite3_api->set_last_insert_rowid +/* Version 3.20.0 and later */ +#define sqlite3_prepare_v3 sqlite3_api->prepare_v3 +#define sqlite3_prepare16_v3 sqlite3_api->prepare16_v3 +#define sqlite3_bind_pointer sqlite3_api->bind_pointer +#define sqlite3_result_pointer sqlite3_api->result_pointer +#define sqlite3_value_pointer sqlite3_api->value_pointer +/* Version 3.22.0 and later */ +#define sqlite3_vtab_nochange sqlite3_api->vtab_nochange +#define sqlite3_value_nochange sqlite3_api->value_nochange +#define sqlite3_vtab_collation sqlite3_api->vtab_collation +/* Version 3.24.0 and later */ +#define sqlite3_keyword_count sqlite3_api->keyword_count +#define sqlite3_keyword_name sqlite3_api->keyword_name +#define sqlite3_keyword_check sqlite3_api->keyword_check +#define sqlite3_str_new sqlite3_api->str_new +#define sqlite3_str_finish sqlite3_api->str_finish +#define sqlite3_str_appendf sqlite3_api->str_appendf +#define sqlite3_str_vappendf sqlite3_api->str_vappendf +#define sqlite3_str_append sqlite3_api->str_append +#define sqlite3_str_appendall sqlite3_api->str_appendall +#define sqlite3_str_appendchar sqlite3_api->str_appendchar +#define sqlite3_str_reset sqlite3_api->str_reset +#define sqlite3_str_errcode sqlite3_api->str_errcode +#define sqlite3_str_length sqlite3_api->str_length +#define sqlite3_str_value sqlite3_api->str_value #endif /* !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) */ #if !defined(SQLITE_CORE) && !defined(SQLITE_OMIT_LOAD_EXTENSION) @@ -111295,6 +116476,7 @@ typedef int (*sqlite3_loadext_entry)( # define sqlite3_open16 0 # define sqlite3_prepare16 0 # define sqlite3_prepare16_v2 0 +# define sqlite3_prepare16_v3 0 # define sqlite3_result_error16 0 # define sqlite3_result_text16 0 # define sqlite3_result_text16be 0 @@ -111665,7 +116847,34 @@ static const sqlite3_api_routines sqlite3Apis = { sqlite3_system_errno, /* Version 3.14.0 and later */ sqlite3_trace_v2, - sqlite3_expanded_sql + sqlite3_expanded_sql, + /* Version 3.18.0 and later */ + sqlite3_set_last_insert_rowid, + /* Version 3.20.0 and later */ + sqlite3_prepare_v3, + sqlite3_prepare16_v3, + sqlite3_bind_pointer, + sqlite3_result_pointer, + sqlite3_value_pointer, + /* Version 3.22.0 and later */ + sqlite3_vtab_nochange, + sqlite3_value_nochange, + sqlite3_vtab_collation, + /* Version 3.24.0 and later */ + sqlite3_keyword_count, + sqlite3_keyword_name, + sqlite3_keyword_check, + sqlite3_str_new, + sqlite3_str_finish, + sqlite3_str_appendf, + sqlite3_str_vappendf, + sqlite3_str_append, + sqlite3_str_appendall, + sqlite3_str_appendchar, + sqlite3_str_reset, + sqlite3_str_errcode, + sqlite3_str_length, + sqlite3_str_value }; /* @@ -112087,34 +117296,38 @@ SQLITE_PRIVATE void sqlite3AutoLoadExtensions(sqlite3 *db){ #define PragTyp_ENCODING 12 #define PragTyp_FOREIGN_KEY_CHECK 13 #define PragTyp_FOREIGN_KEY_LIST 14 -#define PragTyp_INCREMENTAL_VACUUM 15 -#define PragTyp_INDEX_INFO 16 -#define PragTyp_INDEX_LIST 17 -#define PragTyp_INTEGRITY_CHECK 18 -#define PragTyp_JOURNAL_MODE 19 -#define PragTyp_JOURNAL_SIZE_LIMIT 20 -#define PragTyp_LOCK_PROXY_FILE 21 -#define PragTyp_LOCKING_MODE 22 -#define PragTyp_PAGE_COUNT 23 -#define PragTyp_MMAP_SIZE 24 -#define PragTyp_PAGE_SIZE 25 -#define PragTyp_SECURE_DELETE 26 -#define PragTyp_SHRINK_MEMORY 27 -#define PragTyp_SOFT_HEAP_LIMIT 28 -#define PragTyp_STATS 29 -#define PragTyp_SYNCHRONOUS 30 -#define PragTyp_TABLE_INFO 31 -#define PragTyp_TEMP_STORE 32 -#define PragTyp_TEMP_STORE_DIRECTORY 33 -#define PragTyp_THREADS 34 -#define PragTyp_WAL_AUTOCHECKPOINT 35 -#define PragTyp_WAL_CHECKPOINT 36 -#define PragTyp_ACTIVATE_EXTENSIONS 37 -#define PragTyp_HEXKEY 38 -#define PragTyp_KEY 39 -#define PragTyp_REKEY 40 -#define PragTyp_LOCK_STATUS 41 -#define PragTyp_PARSER_TRACE 42 +#define PragTyp_FUNCTION_LIST 15 +#define PragTyp_INCREMENTAL_VACUUM 16 +#define PragTyp_INDEX_INFO 17 +#define PragTyp_INDEX_LIST 18 +#define PragTyp_INTEGRITY_CHECK 19 +#define PragTyp_JOURNAL_MODE 20 +#define PragTyp_JOURNAL_SIZE_LIMIT 21 +#define PragTyp_LOCK_PROXY_FILE 22 +#define PragTyp_LOCKING_MODE 23 +#define PragTyp_PAGE_COUNT 24 +#define PragTyp_MMAP_SIZE 25 +#define PragTyp_MODULE_LIST 26 +#define PragTyp_OPTIMIZE 27 +#define PragTyp_PAGE_SIZE 28 +#define PragTyp_PRAGMA_LIST 29 +#define PragTyp_SECURE_DELETE 30 +#define PragTyp_SHRINK_MEMORY 31 +#define PragTyp_SOFT_HEAP_LIMIT 32 +#define PragTyp_SYNCHRONOUS 33 +#define PragTyp_TABLE_INFO 34 +#define PragTyp_TEMP_STORE 35 +#define PragTyp_TEMP_STORE_DIRECTORY 36 +#define PragTyp_THREADS 37 +#define PragTyp_WAL_AUTOCHECKPOINT 38 +#define PragTyp_WAL_CHECKPOINT 39 +#define PragTyp_ACTIVATE_EXTENSIONS 40 +#define PragTyp_HEXKEY 41 +#define PragTyp_KEY 42 +#define PragTyp_REKEY 43 +#define PragTyp_LOCK_STATUS 44 +#define PragTyp_PARSER_TRACE 45 +#define PragTyp_STATS 46 /* Property flags associated with various pragma. */ #define PragFlg_NeedSchema 0x01 /* Force schema load before running */ @@ -112138,47 +117351,51 @@ static const char *const pragCName[] = { /* 4 */ "notnull", /* 5 */ "dflt_value", /* 6 */ "pk", - /* 7 */ "table", /* Used by: stats */ - /* 8 */ "index", - /* 9 */ "width", - /* 10 */ "height", - /* 11 */ "seqno", /* Used by: index_info */ - /* 12 */ "cid", - /* 13 */ "name", - /* 14 */ "seqno", /* Used by: index_xinfo */ - /* 15 */ "cid", - /* 16 */ "name", - /* 17 */ "desc", - /* 18 */ "coll", - /* 19 */ "key", - /* 20 */ "seq", /* Used by: index_list */ - /* 21 */ "name", - /* 22 */ "unique", - /* 23 */ "origin", - /* 24 */ "partial", - /* 25 */ "seq", /* Used by: database_list */ - /* 26 */ "name", - /* 27 */ "file", - /* 28 */ "seq", /* Used by: collation_list */ - /* 29 */ "name", - /* 30 */ "id", /* Used by: foreign_key_list */ - /* 31 */ "seq", - /* 32 */ "table", - /* 33 */ "from", - /* 34 */ "to", - /* 35 */ "on_update", - /* 36 */ "on_delete", - /* 37 */ "match", - /* 38 */ "table", /* Used by: foreign_key_check */ - /* 39 */ "rowid", - /* 40 */ "parent", - /* 41 */ "fkid", - /* 42 */ "busy", /* Used by: wal_checkpoint */ - /* 43 */ "log", - /* 44 */ "checkpointed", - /* 45 */ "timeout", /* Used by: busy_timeout */ - /* 46 */ "database", /* Used by: lock_status */ - /* 47 */ "status", + /* 7 */ "tbl", /* Used by: stats */ + /* 8 */ "idx", + /* 9 */ "wdth", + /* 10 */ "hght", + /* 11 */ "flgs", + /* 12 */ "seqno", /* Used by: index_info */ + /* 13 */ "cid", + /* 14 */ "name", + /* 15 */ "seqno", /* Used by: index_xinfo */ + /* 16 */ "cid", + /* 17 */ "name", + /* 18 */ "desc", + /* 19 */ "coll", + /* 20 */ "key", + /* 21 */ "seq", /* Used by: index_list */ + /* 22 */ "name", + /* 23 */ "unique", + /* 24 */ "origin", + /* 25 */ "partial", + /* 26 */ "seq", /* Used by: database_list */ + /* 27 */ "name", + /* 28 */ "file", + /* 29 */ "name", /* Used by: function_list */ + /* 30 */ "builtin", + /* 31 */ "name", /* Used by: module_list pragma_list */ + /* 32 */ "seq", /* Used by: collation_list */ + /* 33 */ "name", + /* 34 */ "id", /* Used by: foreign_key_list */ + /* 35 */ "seq", + /* 36 */ "table", + /* 37 */ "from", + /* 38 */ "to", + /* 39 */ "on_update", + /* 40 */ "on_delete", + /* 41 */ "match", + /* 42 */ "table", /* Used by: foreign_key_check */ + /* 43 */ "rowid", + /* 44 */ "parent", + /* 45 */ "fkid", + /* 46 */ "busy", /* Used by: wal_checkpoint */ + /* 47 */ "log", + /* 48 */ "checkpointed", + /* 49 */ "timeout", /* Used by: busy_timeout */ + /* 50 */ "database", /* Used by: lock_status */ + /* 51 */ "status", }; /* Definitions of all built-in pragmas */ @@ -112224,7 +117441,7 @@ static const PragmaName aPragmaName[] = { {/* zName: */ "busy_timeout", /* ePragTyp: */ PragTyp_BUSY_TIMEOUT, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 45, 1, + /* ColNames: */ 49, 1, /* iArg: */ 0 }, #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) {/* zName: */ "cache_size", @@ -112261,7 +117478,7 @@ static const PragmaName aPragmaName[] = { {/* zName: */ "collation_list", /* ePragTyp: */ PragTyp_COLLATION_LIST, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 28, 2, + /* ColNames: */ 32, 2, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_COMPILEOPTION_DIAGS) @@ -112296,7 +117513,7 @@ static const PragmaName aPragmaName[] = { {/* zName: */ "database_list", /* ePragTyp: */ PragTyp_DATABASE_LIST, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0, - /* ColNames: */ 25, 3, + /* ColNames: */ 26, 3, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) && !defined(SQLITE_OMIT_DEPRECATED) @@ -112332,15 +117549,15 @@ static const PragmaName aPragmaName[] = { #if !defined(SQLITE_OMIT_FOREIGN_KEY) && !defined(SQLITE_OMIT_TRIGGER) {/* zName: */ "foreign_key_check", /* ePragTyp: */ PragTyp_FOREIGN_KEY_CHECK, - /* ePragFlg: */ PragFlg_NeedSchema, - /* ColNames: */ 38, 4, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0, + /* ColNames: */ 42, 4, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FOREIGN_KEY) {/* zName: */ "foreign_key_list", /* ePragTyp: */ PragTyp_FOREIGN_KEY_LIST, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 30, 8, + /* ColNames: */ 34, 8, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) @@ -112371,6 +117588,15 @@ static const PragmaName aPragmaName[] = { /* ColNames: */ 0, 0, /* iArg: */ SQLITE_FullFSync }, #endif +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) +#if defined(SQLITE_INTROSPECTION_PRAGMAS) + {/* zName: */ "function_list", + /* ePragTyp: */ PragTyp_FUNCTION_LIST, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 29, 2, + /* iArg: */ 0 }, +#endif +#endif #if defined(SQLITE_HAS_CODEC) {/* zName: */ "hexkey", /* ePragTyp: */ PragTyp_HEXKEY, @@ -112403,23 +117629,23 @@ static const PragmaName aPragmaName[] = { {/* zName: */ "index_info", /* ePragTyp: */ PragTyp_INDEX_INFO, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 11, 3, + /* ColNames: */ 12, 3, /* iArg: */ 0 }, {/* zName: */ "index_list", /* ePragTyp: */ PragTyp_INDEX_LIST, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 20, 5, + /* ColNames: */ 21, 5, /* iArg: */ 0 }, {/* zName: */ "index_xinfo", /* ePragTyp: */ PragTyp_INDEX_INFO, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result1|PragFlg_SchemaOpt, - /* ColNames: */ 14, 6, + /* ColNames: */ 15, 6, /* iArg: */ 1 }, #endif #if !defined(SQLITE_OMIT_INTEGRITY_CHECK) {/* zName: */ "integrity_check", /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, - /* ePragFlg: */ PragFlg_NeedSchema, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_Result1, /* ColNames: */ 0, 0, /* iArg: */ 0 }, #endif @@ -112460,7 +117686,7 @@ static const PragmaName aPragmaName[] = { {/* zName: */ "lock_status", /* ePragTyp: */ PragTyp_LOCK_STATUS, /* ePragFlg: */ PragFlg_Result0, - /* ColNames: */ 46, 2, + /* ColNames: */ 50, 2, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) @@ -112479,6 +117705,24 @@ static const PragmaName aPragmaName[] = { /* ePragFlg: */ 0, /* ColNames: */ 0, 0, /* iArg: */ 0 }, +#endif +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) +#if !defined(SQLITE_OMIT_VIRTUALTABLE) +#if defined(SQLITE_INTROSPECTION_PRAGMAS) + {/* zName: */ "module_list", + /* ePragTyp: */ PragTyp_MODULE_LIST, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 31, 1, + /* iArg: */ 0 }, +#endif +#endif +#endif + {/* zName: */ "optimize", + /* ePragTyp: */ PragTyp_OPTIMIZE, + /* ePragFlg: */ PragFlg_Result1|PragFlg_NeedSchema, + /* ColNames: */ 0, 0, + /* iArg: */ 0 }, +#if !defined(SQLITE_OMIT_PAGER_PRAGMAS) {/* zName: */ "page_count", /* ePragTyp: */ PragTyp_PAGE_COUNT, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, @@ -112497,6 +117741,13 @@ static const PragmaName aPragmaName[] = { /* ColNames: */ 0, 0, /* iArg: */ 0 }, #endif +#if defined(SQLITE_INTROSPECTION_PRAGMAS) + {/* zName: */ "pragma_list", + /* ePragTyp: */ PragTyp_PRAGMA_LIST, + /* ePragFlg: */ PragFlg_Result0, + /* ColNames: */ 31, 1, + /* iArg: */ 0 }, +#endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) {/* zName: */ "query_only", /* ePragTyp: */ PragTyp_FLAG, @@ -112507,7 +117758,7 @@ static const PragmaName aPragmaName[] = { #if !defined(SQLITE_OMIT_INTEGRITY_CHECK) {/* zName: */ "quick_check", /* ePragTyp: */ PragTyp_INTEGRITY_CHECK, - /* ePragFlg: */ PragFlg_NeedSchema, + /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_Result1, /* ColNames: */ 0, 0, /* iArg: */ 0 }, #endif @@ -112516,7 +117767,7 @@ static const PragmaName aPragmaName[] = { /* ePragTyp: */ PragTyp_FLAG, /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1, /* ColNames: */ 0, 0, - /* iArg: */ SQLITE_ReadUncommitted }, + /* iArg: */ SQLITE_ReadUncommit }, {/* zName: */ "recursive_triggers", /* ePragTyp: */ PragTyp_FLAG, /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1, @@ -112577,11 +117828,11 @@ static const PragmaName aPragmaName[] = { /* iArg: */ SQLITE_SqlTrace }, #endif #endif -#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) +#if !defined(SQLITE_OMIT_SCHEMA_PRAGMAS) && defined(SQLITE_DEBUG) {/* zName: */ "stats", /* ePragTyp: */ PragTyp_STATS, /* ePragFlg: */ PragFlg_NeedSchema|PragFlg_Result0|PragFlg_SchemaReq, - /* ColNames: */ 7, 4, + /* ColNames: */ 7, 5, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_PAGER_PRAGMAS) @@ -112660,7 +117911,7 @@ static const PragmaName aPragmaName[] = { {/* zName: */ "wal_checkpoint", /* ePragTyp: */ PragTyp_WAL_CHECKPOINT, /* ePragFlg: */ PragFlg_NeedSchema, - /* ColNames: */ 42, 3, + /* ColNames: */ 46, 3, /* iArg: */ 0 }, #endif #if !defined(SQLITE_OMIT_FLAG_PRAGMAS) @@ -112668,10 +117919,10 @@ static const PragmaName aPragmaName[] = { /* ePragTyp: */ PragTyp_FLAG, /* ePragFlg: */ PragFlg_Result0|PragFlg_NoColumns1, /* ColNames: */ 0, 0, - /* iArg: */ SQLITE_WriteSchema|SQLITE_RecoveryMode }, + /* iArg: */ SQLITE_WriteSchema }, #endif }; -/* Number of pragmas: 60 on by default, 73 total. */ +/* Number of pragmas: 60 on by default, 77 total. */ /************** End of pragma.h **********************************************/ /************** Continuing where we left off in pragma.c *********************/ @@ -112942,6 +118193,22 @@ static const PragmaName *pragmaLocate(const char *zName){ } /* +** Helper subroutine for PRAGMA integrity_check: +** +** Generate code to output a single-column result row with a value of the +** string held in register 3. Decrement the result count in register 1 +** and halt if the maximum number of result rows have been issued. +*/ +static int integrityCheckResultRow(Vdbe *v){ + int addr; + sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); + addr = sqlite3VdbeAddOp3(v, OP_IfPos, 1, sqlite3VdbeCurrentAddr(v)+2, 1); + VdbeCoverage(v); + sqlite3VdbeAddOp0(v, OP_Halt); + return addr; +} + +/* ** Process a pragma statement. ** ** Pragmas are of this form: @@ -113145,18 +118412,22 @@ SQLITE_PRIVATE void sqlite3Pragma( /* ** PRAGMA [schema.]secure_delete - ** PRAGMA [schema.]secure_delete=ON/OFF + ** PRAGMA [schema.]secure_delete=ON/OFF/FAST ** ** The first form reports the current setting for the ** secure_delete flag. The second form changes the secure_delete - ** flag setting and reports thenew value. + ** flag setting and reports the new value. */ case PragTyp_SECURE_DELETE: { Btree *pBt = pDb->pBt; int b = -1; assert( pBt!=0 ); if( zRight ){ - b = sqlite3GetBoolean(zRight, 0); + if( sqlite3_stricmp(zRight, "fast")==0 ){ + b = 2; + }else{ + b = sqlite3GetBoolean(zRight, 0); + } } if( pId2->n==0 && b>=0 ){ int ii; @@ -113645,7 +118916,7 @@ SQLITE_PRIVATE void sqlite3Pragma( if( !db->autoCommit ){ sqlite3ErrorMsg(pParse, "Safety level may not be changed inside a transaction"); - }else{ + }else if( iDb!=1 ){ int iLevel = (getSafetyLevel(zRight,0,1)+1) & PAGER_SYNCHRONOUS_MASK; if( iLevel==0 ) iLevel = 1; pDb->safety_level = iLevel; @@ -113706,6 +118977,7 @@ SQLITE_PRIVATE void sqlite3Pragma( ** type: Column declaration type. ** notnull: True if 'NOT NULL' is part of column declaration ** dflt_value: The default value for the column, if any. + ** pk: Non-zero for PK fields. */ case PragTyp_TABLE_INFO: if( zRight ){ Table *pTab; @@ -113738,35 +119010,37 @@ SQLITE_PRIVATE void sqlite3Pragma( pCol->notNull ? 1 : 0, pCol->pDflt ? pCol->pDflt->u.zToken : 0, k); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 6); } } } break; +#ifdef SQLITE_DEBUG case PragTyp_STATS: { Index *pIdx; HashElem *i; - pParse->nMem = 4; + pParse->nMem = 5; sqlite3CodeVerifySchema(pParse, iDb); for(i=sqliteHashFirst(&pDb->pSchema->tblHash); i; i=sqliteHashNext(i)){ Table *pTab = sqliteHashData(i); - sqlite3VdbeMultiLoad(v, 1, "ssii", + sqlite3VdbeMultiLoad(v, 1, "ssiii", pTab->zName, 0, pTab->szTabRow, - pTab->nRowLogEst); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4); + pTab->nRowLogEst, + pTab->tabFlags); for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - sqlite3VdbeMultiLoad(v, 2, "sii", + sqlite3VdbeMultiLoad(v, 2, "siiiX", pIdx->zName, pIdx->szIdxRow, - pIdx->aiRowLogEst[0]); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 4); + pIdx->aiRowLogEst[0], + pIdx->hasStat1); + sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 5); } } } break; +#endif case PragTyp_INDEX_INFO: if( zRight ){ Index *pIdx; @@ -113789,10 +119063,10 @@ SQLITE_PRIVATE void sqlite3Pragma( assert( pParse->nMem<=pPragma->nPragCName ); for(i=0; i<mx; i++){ i16 cnum = pIdx->aiColumn[i]; - sqlite3VdbeMultiLoad(v, 1, "iis", i, cnum, + sqlite3VdbeMultiLoad(v, 1, "iisX", i, cnum, cnum<0 ? 0 : pTab->aCol[cnum].zName); if( pPragma->iArg ){ - sqlite3VdbeMultiLoad(v, 4, "isi", + sqlite3VdbeMultiLoad(v, 4, "isiX", pIdx->aSortOrder[i], pIdx->azColl[i], i<pIdx->nKeyCol); @@ -113819,7 +119093,6 @@ SQLITE_PRIVATE void sqlite3Pragma( IsUniqueIndex(pIdx), azOrigin[pIdx->idxType], pIdx->pPartIdxWhere!=0); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 5); } } } @@ -113835,7 +119108,6 @@ SQLITE_PRIVATE void sqlite3Pragma( i, db->aDb[i].zDbSName, sqlite3BtreeGetFilename(db->aDb[i].pBt)); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 3); } } break; @@ -113847,10 +119119,49 @@ SQLITE_PRIVATE void sqlite3Pragma( for(p=sqliteHashFirst(&db->aCollSeq); p; p=sqliteHashNext(p)){ CollSeq *pColl = (CollSeq *)sqliteHashData(p); sqlite3VdbeMultiLoad(v, 1, "is", i++, pColl->zName); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); } } break; + +#ifdef SQLITE_INTROSPECTION_PRAGMAS + case PragTyp_FUNCTION_LIST: { + int i; + HashElem *j; + FuncDef *p; + pParse->nMem = 2; + for(i=0; i<SQLITE_FUNC_HASH_SZ; i++){ + for(p=sqlite3BuiltinFunctions.a[i]; p; p=p->u.pHash ){ + sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 1); + } + } + for(j=sqliteHashFirst(&db->aFunc); j; j=sqliteHashNext(j)){ + p = (FuncDef*)sqliteHashData(j); + sqlite3VdbeMultiLoad(v, 1, "si", p->zName, 0); + } + } + break; + +#ifndef SQLITE_OMIT_VIRTUALTABLE + case PragTyp_MODULE_LIST: { + HashElem *j; + pParse->nMem = 1; + for(j=sqliteHashFirst(&db->aModule); j; j=sqliteHashNext(j)){ + Module *pMod = (Module*)sqliteHashData(j); + sqlite3VdbeMultiLoad(v, 1, "s", pMod->zName); + } + } + break; +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + + case PragTyp_PRAGMA_LIST: { + int i; + for(i=0; i<ArraySize(aPragmaName); i++){ + sqlite3VdbeMultiLoad(v, 1, "s", aPragmaName[i].zName); + } + } + break; +#endif /* SQLITE_INTROSPECTION_PRAGMAS */ + #endif /* SQLITE_OMIT_SCHEMA_PRAGMAS */ #ifndef SQLITE_OMIT_FOREIGN_KEY @@ -113876,7 +119187,6 @@ SQLITE_PRIVATE void sqlite3Pragma( actionName(pFK->aAction[1]), /* ON UPDATE */ actionName(pFK->aAction[0]), /* ON DELETE */ "NONE"); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 8); } ++i; pFK = pFK->pNextFrom; @@ -113955,34 +119265,38 @@ SQLITE_PRIVATE void sqlite3Pragma( assert( x==0 ); } addrOk = sqlite3VdbeMakeLabel(v); - if( pParent && pIdx==0 ){ - int iKey = pFK->aCol[0].iFrom; - assert( iKey>=0 && iKey<pTab->nCol ); - if( iKey!=pTab->iPKey ){ - sqlite3VdbeAddOp3(v, OP_Column, 0, iKey, regRow); - sqlite3ColumnDefault(v, pTab, iKey, regRow); - sqlite3VdbeAddOp2(v, OP_IsNull, regRow, addrOk); VdbeCoverage(v); - }else{ - sqlite3VdbeAddOp2(v, OP_Rowid, 0, regRow); - } - sqlite3VdbeAddOp3(v, OP_SeekRowid, i, 0, regRow); VdbeCoverage(v); + + /* Generate code to read the child key values into registers + ** regRow..regRow+n. If any of the child key values are NULL, this + ** row cannot cause an FK violation. Jump directly to addrOk in + ** this case. */ + for(j=0; j<pFK->nCol; j++){ + int iCol = aiCols ? aiCols[j] : pFK->aCol[j].iFrom; + sqlite3ExprCodeGetColumnOfTable(v, pTab, 0, iCol, regRow+j); + sqlite3VdbeAddOp2(v, OP_IsNull, regRow+j, addrOk); VdbeCoverage(v); + } + + /* Generate code to query the parent index for a matching parent + ** key. If a match is found, jump to addrOk. */ + if( pIdx ){ + sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, pFK->nCol, regKey, + sqlite3IndexAffinityStr(db,pIdx), pFK->nCol); + sqlite3VdbeAddOp4Int(v, OP_Found, i, addrOk, regKey, 0); + VdbeCoverage(v); + }else if( pParent ){ + int jmp = sqlite3VdbeCurrentAddr(v)+2; + sqlite3VdbeAddOp3(v, OP_SeekRowid, i, jmp, regRow); VdbeCoverage(v); sqlite3VdbeGoto(v, addrOk); - sqlite3VdbeJumpHere(v, sqlite3VdbeCurrentAddr(v)-2); + assert( pFK->nCol==1 ); + } + + /* Generate code to report an FK violation to the caller. */ + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp2(v, OP_Rowid, 0, regResult+1); }else{ - for(j=0; j<pFK->nCol; j++){ - sqlite3ExprCodeGetColumnOfTable(v, pTab, 0, - aiCols ? aiCols[j] : pFK->aCol[j].iFrom, regRow+j); - sqlite3VdbeAddOp2(v, OP_IsNull, regRow+j, addrOk); VdbeCoverage(v); - } - if( pParent ){ - sqlite3VdbeAddOp4(v, OP_MakeRecord, regRow, pFK->nCol, regKey, - sqlite3IndexAffinityStr(db,pIdx), pFK->nCol); - sqlite3VdbeAddOp4Int(v, OP_Found, i, addrOk, regKey, 0); - VdbeCoverage(v); - } + sqlite3VdbeAddOp2(v, OP_Null, 0, regResult+1); } - sqlite3VdbeAddOp2(v, OP_Rowid, 0, regResult+1); - sqlite3VdbeMultiLoad(v, regResult+2, "si", pFK->zTo, i-1); + sqlite3VdbeMultiLoad(v, regResult+2, "siX", pFK->zTo, i-1); sqlite3VdbeAddOp2(v, OP_ResultRow, regResult, 4); sqlite3VdbeResolveLabel(v, addrOk); sqlite3DbFree(db, aiCols); @@ -114023,9 +119337,17 @@ SQLITE_PRIVATE void sqlite3Pragma( #endif #ifndef SQLITE_OMIT_INTEGRITY_CHECK - /* Pragma "quick_check" is reduced version of + /* PRAGMA integrity_check + ** PRAGMA integrity_check(N) + ** PRAGMA quick_check + ** PRAGMA quick_check(N) + ** + ** Verify the integrity of the database. + ** + ** The "quick_check" is reduced version of ** integrity_check designed to detect most database corruption - ** without most of the overhead of a full integrity-check. + ** without the overhead of cross-checking indexes. Quick_check + ** is linear time wherease integrity_check is O(NlogN). */ case PragTyp_INTEGRITY_CHECK: { int i, j, addr, mxErr; @@ -114056,25 +119378,20 @@ SQLITE_PRIVATE void sqlite3Pragma( mxErr = SQLITE_INTEGRITY_CHECK_ERROR_MAX; } } - sqlite3VdbeAddOp2(v, OP_Integer, mxErr, 1); /* reg[1] holds errors left */ + sqlite3VdbeAddOp2(v, OP_Integer, mxErr-1, 1); /* reg[1] holds errors left */ /* Do an integrity check on each database file */ for(i=0; i<db->nDb; i++){ - HashElem *x; - Hash *pTbls; - int *aRoot; - int cnt = 0; - int mxIdx = 0; - int nIdx; + HashElem *x; /* For looping over tables in the schema */ + Hash *pTbls; /* Set of all tables in the schema */ + int *aRoot; /* Array of root page numbers of all btrees */ + int cnt = 0; /* Number of entries in aRoot[] */ + int mxIdx = 0; /* Maximum number of indexes for any table */ if( OMIT_TEMPDB && i==1 ) continue; if( iDb>=0 && i!=iDb ) continue; sqlite3CodeVerifySchema(pParse, i); - addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Halt if out of errors */ - VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); - sqlite3VdbeJumpHere(v, addr); /* Do an integrity check of the B-Tree ** @@ -114084,8 +119401,9 @@ SQLITE_PRIVATE void sqlite3Pragma( assert( sqlite3SchemaMutexHeld(db, i, 0) ); pTbls = &db->aDb[i].pSchema->tblHash; for(cnt=0, x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){ - Table *pTab = sqliteHashData(x); - Index *pIdx; + Table *pTab = sqliteHashData(x); /* Current table */ + Index *pIdx; /* An index on pTab */ + int nIdx; /* Number of indexes on pTab */ if( HasRowid(pTab) ) cnt++; for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ cnt++; } if( nIdx>mxIdx ) mxIdx = nIdx; @@ -114095,15 +119413,16 @@ SQLITE_PRIVATE void sqlite3Pragma( for(cnt=0, x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){ Table *pTab = sqliteHashData(x); Index *pIdx; - if( HasRowid(pTab) ) aRoot[cnt++] = pTab->tnum; + if( HasRowid(pTab) ) aRoot[++cnt] = pTab->tnum; for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - aRoot[cnt++] = pIdx->tnum; + aRoot[++cnt] = pIdx->tnum; } } - aRoot[cnt] = 0; + aRoot[0] = cnt; /* Make sure sufficient number of registers have been allocated */ pParse->nMem = MAX( pParse->nMem, 8+mxIdx ); + sqlite3ClearTempRegCache(pParse); /* Do the b-tree integrity checks */ sqlite3VdbeAddOp4(v, OP_IntegrityCk, 2, cnt, 1, (char*)aRoot,P4_INTARRAY); @@ -114112,14 +119431,13 @@ SQLITE_PRIVATE void sqlite3Pragma( sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, sqlite3MPrintf(db, "*** in database %s ***\n", db->aDb[i].zDbSName), P4_DYNAMIC); - sqlite3VdbeAddOp3(v, OP_Move, 2, 4, 1); - sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 2); - sqlite3VdbeAddOp2(v, OP_ResultRow, 2, 1); + sqlite3VdbeAddOp3(v, OP_Concat, 2, 3, 3); + integrityCheckResultRow(v); sqlite3VdbeJumpHere(v, addr); /* Make sure all the indices are constructed correctly. */ - for(x=sqliteHashFirst(pTbls); x && !isQuick; x=sqliteHashNext(x)){ + for(x=sqliteHashFirst(pTbls); x; x=sqliteHashNext(x)){ Table *pTab = sqliteHashData(x); Index *pIdx, *pPk; Index *pPrior = 0; @@ -114127,15 +119445,14 @@ SQLITE_PRIVATE void sqlite3Pragma( int iDataCur, iIdxCur; int r1 = -1; - if( pTab->pIndex==0 ) continue; + if( pTab->tnum<1 ) continue; /* Skip VIEWs or VIRTUAL TABLEs */ pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); - addr = sqlite3VdbeAddOp1(v, OP_IfPos, 1); /* Stop if out of errors */ - VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); - sqlite3VdbeJumpHere(v, addr); sqlite3ExprCacheClear(pParse); sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenRead, 0, 1, 0, &iDataCur, &iIdxCur); + /* reg[7] counts the number of entries in the table. + ** reg[8+i] counts the number of entries in the i-th index + */ sqlite3VdbeAddOp2(v, OP_Integer, 0, 7); for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ sqlite3VdbeAddOp2(v, OP_Integer, 0, 8+j); /* index entries counter */ @@ -114147,88 +119464,110 @@ SQLITE_PRIVATE void sqlite3Pragma( /* Verify that all NOT NULL columns really are NOT NULL */ for(j=0; j<pTab->nCol; j++){ char *zErr; - int jmp2, jmp3; + int jmp2; if( j==pTab->iPKey ) continue; if( pTab->aCol[j].notNull==0 ) continue; sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur, j, 3); sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG); jmp2 = sqlite3VdbeAddOp1(v, OP_NotNull, 3); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ zErr = sqlite3MPrintf(db, "NULL value in %s.%s", pTab->zName, pTab->aCol[j].zName); sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC); - sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); - jmp3 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v); - sqlite3VdbeAddOp0(v, OP_Halt); + integrityCheckResultRow(v); sqlite3VdbeJumpHere(v, jmp2); - sqlite3VdbeJumpHere(v, jmp3); } - /* Validate index entries for the current row */ - for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ - int jmp2, jmp3, jmp4, jmp5; - int ckUniq = sqlite3VdbeMakeLabel(v); - if( pPk==pIdx ) continue; - r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3, - pPrior, r1); - pPrior = pIdx; - sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1); /* increment entry count */ - /* Verify that an index entry exists for the current table row */ - jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1, - pIdx->nColumn); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ - sqlite3VdbeLoadString(v, 3, "row "); - sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3); - sqlite3VdbeLoadString(v, 4, " missing from index "); - sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); - jmp5 = sqlite3VdbeLoadString(v, 4, pIdx->zName); - sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); - sqlite3VdbeAddOp2(v, OP_ResultRow, 3, 1); - jmp4 = sqlite3VdbeAddOp1(v, OP_IfPos, 1); VdbeCoverage(v); - sqlite3VdbeAddOp0(v, OP_Halt); - sqlite3VdbeJumpHere(v, jmp2); - /* For UNIQUE indexes, verify that only one entry exists with the - ** current key. The entry is unique if (1) any column is NULL - ** or (2) the next entry has a different key */ - if( IsUniqueIndex(pIdx) ){ - int uniqOk = sqlite3VdbeMakeLabel(v); - int jmp6; - int kk; - for(kk=0; kk<pIdx->nKeyCol; kk++){ - int iCol = pIdx->aiColumn[kk]; - assert( iCol!=XN_ROWID && iCol<pTab->nCol ); - if( iCol>=0 && pTab->aCol[iCol].notNull ) continue; - sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk); - VdbeCoverage(v); + /* Verify CHECK constraints */ + if( pTab->pCheck && (db->flags & SQLITE_IgnoreChecks)==0 ){ + ExprList *pCheck = sqlite3ExprListDup(db, pTab->pCheck, 0); + if( db->mallocFailed==0 ){ + int addrCkFault = sqlite3VdbeMakeLabel(v); + int addrCkOk = sqlite3VdbeMakeLabel(v); + char *zErr; + int k; + pParse->iSelfTab = iDataCur + 1; + sqlite3ExprCachePush(pParse); + for(k=pCheck->nExpr-1; k>0; k--){ + sqlite3ExprIfFalse(pParse, pCheck->a[k].pExpr, addrCkFault, 0); } - jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v); - sqlite3VdbeGoto(v, uniqOk); - sqlite3VdbeJumpHere(v, jmp6); - sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1, - pIdx->nKeyCol); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); /* Decrement error limit */ - sqlite3VdbeLoadString(v, 3, "non-unique entry in index "); - sqlite3VdbeGoto(v, jmp5); - sqlite3VdbeResolveLabel(v, uniqOk); + sqlite3ExprIfTrue(pParse, pCheck->a[0].pExpr, addrCkOk, + SQLITE_JUMPIFNULL); + sqlite3VdbeResolveLabel(v, addrCkFault); + pParse->iSelfTab = 0; + zErr = sqlite3MPrintf(db, "CHECK constraint failed in %s", + pTab->zName); + sqlite3VdbeAddOp4(v, OP_String8, 0, 3, 0, zErr, P4_DYNAMIC); + integrityCheckResultRow(v); + sqlite3VdbeResolveLabel(v, addrCkOk); + sqlite3ExprCachePop(pParse); + } + sqlite3ExprListDelete(db, pCheck); + } + if( !isQuick ){ /* Omit the remaining tests for quick_check */ + /* Sanity check on record header decoding */ + sqlite3VdbeAddOp3(v, OP_Column, iDataCur, pTab->nCol-1, 3); + sqlite3VdbeChangeP5(v, OPFLAG_TYPEOFARG); + /* Validate index entries for the current row */ + for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ + int jmp2, jmp3, jmp4, jmp5; + int ckUniq = sqlite3VdbeMakeLabel(v); + if( pPk==pIdx ) continue; + r1 = sqlite3GenerateIndexKey(pParse, pIdx, iDataCur, 0, 0, &jmp3, + pPrior, r1); + pPrior = pIdx; + sqlite3VdbeAddOp2(v, OP_AddImm, 8+j, 1);/* increment entry count */ + /* Verify that an index entry exists for the current table row */ + jmp2 = sqlite3VdbeAddOp4Int(v, OP_Found, iIdxCur+j, ckUniq, r1, + pIdx->nColumn); VdbeCoverage(v); + sqlite3VdbeLoadString(v, 3, "row "); + sqlite3VdbeAddOp3(v, OP_Concat, 7, 3, 3); + sqlite3VdbeLoadString(v, 4, " missing from index "); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); + jmp5 = sqlite3VdbeLoadString(v, 4, pIdx->zName); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 3, 3); + jmp4 = integrityCheckResultRow(v); + sqlite3VdbeJumpHere(v, jmp2); + /* For UNIQUE indexes, verify that only one entry exists with the + ** current key. The entry is unique if (1) any column is NULL + ** or (2) the next entry has a different key */ + if( IsUniqueIndex(pIdx) ){ + int uniqOk = sqlite3VdbeMakeLabel(v); + int jmp6; + int kk; + for(kk=0; kk<pIdx->nKeyCol; kk++){ + int iCol = pIdx->aiColumn[kk]; + assert( iCol!=XN_ROWID && iCol<pTab->nCol ); + if( iCol>=0 && pTab->aCol[iCol].notNull ) continue; + sqlite3VdbeAddOp2(v, OP_IsNull, r1+kk, uniqOk); + VdbeCoverage(v); + } + jmp6 = sqlite3VdbeAddOp1(v, OP_Next, iIdxCur+j); VdbeCoverage(v); + sqlite3VdbeGoto(v, uniqOk); + sqlite3VdbeJumpHere(v, jmp6); + sqlite3VdbeAddOp4Int(v, OP_IdxGT, iIdxCur+j, uniqOk, r1, + pIdx->nKeyCol); VdbeCoverage(v); + sqlite3VdbeLoadString(v, 3, "non-unique entry in index "); + sqlite3VdbeGoto(v, jmp5); + sqlite3VdbeResolveLabel(v, uniqOk); + } + sqlite3VdbeJumpHere(v, jmp4); + sqlite3ResolvePartIdxLabel(pParse, jmp3); } - sqlite3VdbeJumpHere(v, jmp4); - sqlite3ResolvePartIdxLabel(pParse, jmp3); } sqlite3VdbeAddOp2(v, OP_Next, iDataCur, loopTop); VdbeCoverage(v); sqlite3VdbeJumpHere(v, loopTop-1); #ifndef SQLITE_OMIT_BTREECOUNT - sqlite3VdbeLoadString(v, 2, "wrong # of entries in index "); - for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ - if( pPk==pIdx ) continue; - addr = sqlite3VdbeCurrentAddr(v); - sqlite3VdbeAddOp2(v, OP_IfPos, 1, addr+2); VdbeCoverage(v); - sqlite3VdbeAddOp2(v, OP_Halt, 0, 0); - sqlite3VdbeAddOp2(v, OP_Count, iIdxCur+j, 3); - sqlite3VdbeAddOp3(v, OP_Eq, 8+j, addr+8, 3); VdbeCoverage(v); - sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); - sqlite3VdbeAddOp2(v, OP_AddImm, 1, -1); - sqlite3VdbeLoadString(v, 3, pIdx->zName); - sqlite3VdbeAddOp3(v, OP_Concat, 3, 2, 7); - sqlite3VdbeAddOp2(v, OP_ResultRow, 7, 1); + if( !isQuick ){ + sqlite3VdbeLoadString(v, 2, "wrong # of entries in index "); + for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ + if( pPk==pIdx ) continue; + sqlite3VdbeAddOp2(v, OP_Count, iIdxCur+j, 3); + addr = sqlite3VdbeAddOp3(v, OP_Eq, 8+j, 0, 3); VdbeCoverage(v); + sqlite3VdbeChangeP5(v, SQLITE_NOTNULL); + sqlite3VdbeLoadString(v, 4, pIdx->zName); + sqlite3VdbeAddOp3(v, OP_Concat, 4, 2, 3); + integrityCheckResultRow(v); + sqlite3VdbeJumpHere(v, addr); + } } #endif /* SQLITE_OMIT_BTREECOUNT */ } @@ -114237,18 +119576,24 @@ SQLITE_PRIVATE void sqlite3Pragma( static const int iLn = VDBE_OFFSET_LINENO(2); static const VdbeOpList endCode[] = { { OP_AddImm, 1, 0, 0}, /* 0 */ - { OP_If, 1, 4, 0}, /* 1 */ + { OP_IfNotZero, 1, 4, 0}, /* 1 */ { OP_String8, 0, 3, 0}, /* 2 */ { OP_ResultRow, 3, 1, 0}, /* 3 */ + { OP_Halt, 0, 0, 0}, /* 4 */ + { OP_String8, 0, 3, 0}, /* 5 */ + { OP_Goto, 0, 3, 0}, /* 6 */ }; VdbeOp *aOp; aOp = sqlite3VdbeAddOpList(v, ArraySize(endCode), endCode, iLn); if( aOp ){ - aOp[0].p2 = -mxErr; + aOp[0].p2 = 1-mxErr; aOp[2].p4type = P4_STATIC; aOp[2].p4.z = "ok"; + aOp[5].p4type = P4_STATIC; + aOp[5].p4.z = (char*)sqlite3ErrStr(SQLITE_CORRUPT); } + sqlite3VdbeChangeP3(v, 0, sqlite3VdbeCurrentAddr(v)-2); } } break; @@ -114471,6 +119816,119 @@ SQLITE_PRIVATE void sqlite3Pragma( } /* + ** PRAGMA optimize + ** PRAGMA optimize(MASK) + ** PRAGMA schema.optimize + ** PRAGMA schema.optimize(MASK) + ** + ** Attempt to optimize the database. All schemas are optimized in the first + ** two forms, and only the specified schema is optimized in the latter two. + ** + ** The details of optimizations performed by this pragma are expected + ** to change and improve over time. Applications should anticipate that + ** this pragma will perform new optimizations in future releases. + ** + ** The optional argument is a bitmask of optimizations to perform: + ** + ** 0x0001 Debugging mode. Do not actually perform any optimizations + ** but instead return one line of text for each optimization + ** that would have been done. Off by default. + ** + ** 0x0002 Run ANALYZE on tables that might benefit. On by default. + ** See below for additional information. + ** + ** 0x0004 (Not yet implemented) Record usage and performance + ** information from the current session in the + ** database file so that it will be available to "optimize" + ** pragmas run by future database connections. + ** + ** 0x0008 (Not yet implemented) Create indexes that might have + ** been helpful to recent queries + ** + ** The default MASK is and always shall be 0xfffe. 0xfffe means perform all + ** of the optimizations listed above except Debug Mode, including new + ** optimizations that have not yet been invented. If new optimizations are + ** ever added that should be off by default, those off-by-default + ** optimizations will have bitmasks of 0x10000 or larger. + ** + ** DETERMINATION OF WHEN TO RUN ANALYZE + ** + ** In the current implementation, a table is analyzed if only if all of + ** the following are true: + ** + ** (1) MASK bit 0x02 is set. + ** + ** (2) The query planner used sqlite_stat1-style statistics for one or + ** more indexes of the table at some point during the lifetime of + ** the current connection. + ** + ** (3) One or more indexes of the table are currently unanalyzed OR + ** the number of rows in the table has increased by 25 times or more + ** since the last time ANALYZE was run. + ** + ** The rules for when tables are analyzed are likely to change in + ** future releases. + */ + case PragTyp_OPTIMIZE: { + int iDbLast; /* Loop termination point for the schema loop */ + int iTabCur; /* Cursor for a table whose size needs checking */ + HashElem *k; /* Loop over tables of a schema */ + Schema *pSchema; /* The current schema */ + Table *pTab; /* A table in the schema */ + Index *pIdx; /* An index of the table */ + LogEst szThreshold; /* Size threshold above which reanalysis is needd */ + char *zSubSql; /* SQL statement for the OP_SqlExec opcode */ + u32 opMask; /* Mask of operations to perform */ + + if( zRight ){ + opMask = (u32)sqlite3Atoi(zRight); + if( (opMask & 0x02)==0 ) break; + }else{ + opMask = 0xfffe; + } + iTabCur = pParse->nTab++; + for(iDbLast = zDb?iDb:db->nDb-1; iDb<=iDbLast; iDb++){ + if( iDb==1 ) continue; + sqlite3CodeVerifySchema(pParse, iDb); + pSchema = db->aDb[iDb].pSchema; + for(k=sqliteHashFirst(&pSchema->tblHash); k; k=sqliteHashNext(k)){ + pTab = (Table*)sqliteHashData(k); + + /* If table pTab has not been used in a way that would benefit from + ** having analysis statistics during the current session, then skip it. + ** This also has the effect of skipping virtual tables and views */ + if( (pTab->tabFlags & TF_StatsUsed)==0 ) continue; + + /* Reanalyze if the table is 25 times larger than the last analysis */ + szThreshold = pTab->nRowLogEst + 46; assert( sqlite3LogEst(25)==46 ); + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( !pIdx->hasStat1 ){ + szThreshold = 0; /* Always analyze if any index lacks statistics */ + break; + } + } + if( szThreshold ){ + sqlite3OpenTable(pParse, iTabCur, iDb, pTab, OP_OpenRead); + sqlite3VdbeAddOp3(v, OP_IfSmaller, iTabCur, + sqlite3VdbeCurrentAddr(v)+2+(opMask&1), szThreshold); + VdbeCoverage(v); + } + zSubSql = sqlite3MPrintf(db, "ANALYZE \"%w\".\"%w\"", + db->aDb[iDb].zDbSName, pTab->zName); + if( opMask & 0x01 ){ + int r1 = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp4(v, OP_String8, 0, r1, 0, zSubSql, P4_DYNAMIC); + sqlite3VdbeAddOp2(v, OP_ResultRow, r1, 1); + }else{ + sqlite3VdbeAddOp4(v, OP_SqlExec, 0, 0, 0, zSubSql, P4_DYNAMIC); + } + } + } + sqlite3VdbeAddOp0(v, OP_Expire); + break; + } + + /* ** PRAGMA busy_timeout ** PRAGMA busy_timeout = N ** @@ -114550,7 +120008,6 @@ SQLITE_PRIVATE void sqlite3Pragma( zState = azLockName[j]; } sqlite3VdbeMultiLoad(v, 1, "ss", db->aDb[i].zDbSName, zState); - sqlite3VdbeAddOp2(v, OP_ResultRow, 1, 2); } break; } @@ -114656,26 +120113,26 @@ static int pragmaVtabConnect( UNUSED_PARAMETER(argc); UNUSED_PARAMETER(argv); sqlite3StrAccumInit(&acc, 0, zBuf, sizeof(zBuf), 0); - sqlite3StrAccumAppendAll(&acc, "CREATE TABLE x"); + sqlite3_str_appendall(&acc, "CREATE TABLE x"); for(i=0, j=pPragma->iPragCName; i<pPragma->nPragCName; i++, j++){ - sqlite3XPrintf(&acc, "%c\"%s\"", cSep, pragCName[j]); + sqlite3_str_appendf(&acc, "%c\"%s\"", cSep, pragCName[j]); cSep = ','; } if( i==0 ){ - sqlite3XPrintf(&acc, "(\"%s\"", pPragma->zName); + sqlite3_str_appendf(&acc, "(\"%s\"", pPragma->zName); cSep = ','; i++; } j = 0; if( pPragma->mPragFlg & PragFlg_Result1 ){ - sqlite3StrAccumAppendAll(&acc, ",arg HIDDEN"); + sqlite3_str_appendall(&acc, ",arg HIDDEN"); j++; } if( pPragma->mPragFlg & (PragFlg_SchemaOpt|PragFlg_SchemaReq) ){ - sqlite3StrAccumAppendAll(&acc, ",schema HIDDEN"); + sqlite3_str_appendall(&acc, ",schema HIDDEN"); j++; } - sqlite3StrAccumAppend(&acc, ")", 1); + sqlite3_str_append(&acc, ")", 1); sqlite3StrAccumFinish(&acc); assert( strlen(zBuf) < sizeof(zBuf)-1 ); rc = sqlite3_declare_vtab(db, zBuf); @@ -114816,20 +120273,24 @@ static int pragmaVtabFilter( pragmaVtabCursorClear(pCsr); j = (pTab->pName->mPragFlg & PragFlg_Result1)!=0 ? 0 : 1; for(i=0; i<argc; i++, j++){ + const char *zText = (const char*)sqlite3_value_text(argv[i]); assert( j<ArraySize(pCsr->azArg) ); - pCsr->azArg[j] = sqlite3_mprintf("%s", sqlite3_value_text(argv[i])); - if( pCsr->azArg[j]==0 ){ - return SQLITE_NOMEM; + assert( pCsr->azArg[j]==0 ); + if( zText ){ + pCsr->azArg[j] = sqlite3_mprintf("%s", zText); + if( pCsr->azArg[j]==0 ){ + return SQLITE_NOMEM; + } } } sqlite3StrAccumInit(&acc, 0, 0, 0, pTab->db->aLimit[SQLITE_LIMIT_SQL_LENGTH]); - sqlite3StrAccumAppendAll(&acc, "PRAGMA "); + sqlite3_str_appendall(&acc, "PRAGMA "); if( pCsr->azArg[1] ){ - sqlite3XPrintf(&acc, "%Q.", pCsr->azArg[1]); + sqlite3_str_appendf(&acc, "%Q.", pCsr->azArg[1]); } - sqlite3StrAccumAppendAll(&acc, pTab->pName->zName); + sqlite3_str_appendall(&acc, pTab->pName->zName); if( pCsr->azArg[0] ){ - sqlite3XPrintf(&acc, "=%Q", pCsr->azArg[0]); + sqlite3_str_appendf(&acc, "=%Q", pCsr->azArg[0]); } zSql = sqlite3StrAccumFinish(&acc); if( zSql==0 ) return SQLITE_NOMEM; @@ -114952,11 +120413,11 @@ static void corruptSchema( const char *zExtra /* Error information */ ){ sqlite3 *db = pData->db; - if( !db->mallocFailed && (db->flags & SQLITE_RecoveryMode)==0 ){ + if( !db->mallocFailed && (db->flags & SQLITE_WriteSchema)==0 ){ char *z; if( zObj==0 ) zObj = "?"; z = sqlite3MPrintf(db, "malformed database schema (%s)", zObj); - if( zExtra ) z = sqlite3MPrintf(db, "%z - %s", z, zExtra); + if( zExtra && zExtra[0] ) z = sqlite3MPrintf(db, "%z - %s", z, zExtra); sqlite3DbFree(db, *pData->pzErrMsg); *pData->pzErrMsg = z; } @@ -115012,7 +120473,7 @@ SQLITE_PRIVATE int sqlite3InitCallback(void *pInit, int argc, char **argv, char rc = db->errCode; assert( (rc&0xFF)==(rcp&0xFF) ); db->init.iDb = saved_iDb; - assert( saved_iDb==0 || (db->flags & SQLITE_Vacuum)!=0 ); + assert( saved_iDb==0 || (db->mDbFlags & DBFLAG_Vacuum)!=0 ); if( SQLITE_OK!=rc ){ if( db->init.orphanTrigger ){ assert( iDb==1 ); @@ -115072,11 +120533,14 @@ static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ const char *zMasterName; int openedTransaction = 0; + assert( (db->mDbFlags & DBFLAG_SchemaKnownOk)==0 ); assert( iDb>=0 && iDb<db->nDb ); assert( db->aDb[iDb].pSchema ); assert( sqlite3_mutex_held(db->mutex) ); assert( iDb==1 || sqlite3BtreeHoldsMutex(db->aDb[iDb].pBt) ); + db->init.busy = 1; + /* Construct the in-memory representation schema tables (sqlite_master or ** sqlite_temp_master) by invoking the parser directly. The appropriate ** table name will be inserted automatically by the parser so we can just @@ -115085,7 +120549,7 @@ static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ azArg[0] = zMasterName = SCHEMA_TABLE(iDb); azArg[1] = "1"; azArg[2] = "CREATE TABLE x(type text,name text,tbl_name text," - "rootpage integer,sql text)"; + "rootpage int,sql text)"; azArg[3] = 0; initData.db = db; initData.iDb = iDb; @@ -115101,10 +120565,10 @@ static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ */ pDb = &db->aDb[iDb]; if( pDb->pBt==0 ){ - if( !OMIT_TEMPDB && ALWAYS(iDb==1) ){ - DbSetProperty(db, 1, DB_SchemaLoaded); - } - return SQLITE_OK; + assert( iDb==1 ); + DbSetProperty(db, 1, DB_SchemaLoaded); + rc = SQLITE_OK; + goto error_out; } /* If there is not already a read-only (or read-write) transaction opened @@ -115140,6 +120604,9 @@ static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ for(i=0; i<ArraySize(meta); i++){ sqlite3BtreeGetMeta(pDb->pBt, i+1, (u32 *)&meta[i]); } + if( (db->flags & SQLITE_ResetDatabase)!=0 ){ + memset(meta, 0, sizeof(meta)); + } pDb->pSchema->schema_cookie = meta[BTREE_SCHEMA_VERSION-1]; /* If opening a non-empty database, check the text encoding. For the @@ -115239,8 +120706,8 @@ static int sqlite3InitOne(sqlite3 *db, int iDb, char **pzErrMsg){ rc = SQLITE_NOMEM_BKPT; sqlite3ResetAllSchemasOfConnection(db); } - if( rc==SQLITE_OK || (db->flags&SQLITE_RecoveryMode)){ - /* Black magic: If the SQLITE_RecoveryMode flag is set, then consider + if( rc==SQLITE_OK || (db->flags&SQLITE_WriteSchema)){ + /* Black magic: If the SQLITE_WriteSchema flag is set, then consider ** the schema loaded, even if errors occurred. In this situation the ** current sqlite3_prepare() operation will fail, but the following one ** will attempt to compile the supplied statement against whatever subset @@ -115263,9 +120730,13 @@ initone_error_out: sqlite3BtreeLeave(pDb->pBt); error_out: - if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ - sqlite3OomFault(db); + if( rc ){ + if( rc==SQLITE_NOMEM || rc==SQLITE_IOERR_NOMEM ){ + sqlite3OomFault(db); + } + sqlite3ResetOneSchema(db, iDb); } + db->init.busy = 0; return rc; } @@ -115281,42 +120752,30 @@ error_out: */ SQLITE_PRIVATE int sqlite3Init(sqlite3 *db, char **pzErrMsg){ int i, rc; - int commit_internal = !(db->flags&SQLITE_InternChanges); + int commit_internal = !(db->mDbFlags&DBFLAG_SchemaChange); assert( sqlite3_mutex_held(db->mutex) ); assert( sqlite3BtreeHoldsMutex(db->aDb[0].pBt) ); assert( db->init.busy==0 ); - rc = SQLITE_OK; - db->init.busy = 1; ENC(db) = SCHEMA_ENC(db); - for(i=0; rc==SQLITE_OK && i<db->nDb; i++){ - if( DbHasProperty(db, i, DB_SchemaLoaded) || i==1 ) continue; - rc = sqlite3InitOne(db, i, pzErrMsg); - if( rc ){ - sqlite3ResetOneSchema(db, i); - } + assert( db->nDb>0 ); + /* Do the main schema first */ + if( !DbHasProperty(db, 0, DB_SchemaLoaded) ){ + rc = sqlite3InitOne(db, 0, pzErrMsg); + if( rc ) return rc; } - - /* Once all the other databases have been initialized, load the schema - ** for the TEMP database. This is loaded last, as the TEMP database - ** schema may contain references to objects in other databases. - */ -#ifndef SQLITE_OMIT_TEMPDB - assert( db->nDb>1 ); - if( rc==SQLITE_OK && !DbHasProperty(db, 1, DB_SchemaLoaded) ){ - rc = sqlite3InitOne(db, 1, pzErrMsg); - if( rc ){ - sqlite3ResetOneSchema(db, 1); + /* All other schemas after the main schema. The "temp" schema must be last */ + for(i=db->nDb-1; i>0; i--){ + assert( i==1 || sqlite3BtreeHoldsMutex(db->aDb[i].pBt) ); + if( !DbHasProperty(db, i, DB_SchemaLoaded) ){ + rc = sqlite3InitOne(db, i, pzErrMsg); + if( rc ) return rc; } } -#endif - - db->init.busy = 0; - if( rc==SQLITE_OK && commit_internal ){ + if( commit_internal ){ sqlite3CommitInternalChanges(db); } - - return rc; + return SQLITE_OK; } /* @@ -115329,10 +120788,12 @@ SQLITE_PRIVATE int sqlite3ReadSchema(Parse *pParse){ assert( sqlite3_mutex_held(db->mutex) ); if( !db->init.busy ){ rc = sqlite3Init(db, &pParse->zErrMsg); - } - if( rc!=SQLITE_OK ){ - pParse->rc = rc; - pParse->nErr++; + if( rc!=SQLITE_OK ){ + pParse->rc = rc; + pParse->nErr++; + }else if( db->noSharedCache ){ + db->mDbFlags |= DBFLAG_SchemaKnownOk; + } } return rc; } @@ -115407,7 +120868,8 @@ SQLITE_PRIVATE int sqlite3SchemaToIndex(sqlite3 *db, Schema *pSchema){ */ assert( sqlite3_mutex_held(db->mutex) ); if( pSchema ){ - for(i=0; ALWAYS(i<db->nDb); i++){ + for(i=0; 1; i++){ + assert( i<db->nDb ); if( db->aDb[i].pSchema==pSchema ){ break; } @@ -115421,16 +120883,14 @@ SQLITE_PRIVATE int sqlite3SchemaToIndex(sqlite3 *db, Schema *pSchema){ ** Free all memory allocations in the pParse object */ SQLITE_PRIVATE void sqlite3ParserReset(Parse *pParse){ - if( pParse ){ - sqlite3 *db = pParse->db; - sqlite3DbFree(db, pParse->aLabel); - sqlite3ExprListDelete(db, pParse->pConstExpr); - if( db ){ - assert( db->lookaside.bDisable >= pParse->disableLookaside ); - db->lookaside.bDisable -= pParse->disableLookaside; - } - pParse->disableLookaside = 0; + sqlite3 *db = pParse->db; + sqlite3DbFree(db, pParse->aLabel); + sqlite3ExprListDelete(db, pParse->pConstExpr); + if( db ){ + assert( db->lookaside.bDisable >= pParse->disableLookaside ); + db->lookaside.bDisable -= pParse->disableLookaside; } + pParse->disableLookaside = 0; } /* @@ -115440,7 +120900,7 @@ static int sqlite3Prepare( sqlite3 *db, /* Database handle. */ const char *zSql, /* UTF-8 encoded SQL statement. */ int nBytes, /* Length of zSql in bytes. */ - int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */ + u32 prepFlags, /* Zero or more SQLITE_PREPARE_* flags */ Vdbe *pReprepare, /* VM being reprepared */ sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ const char **pzTail /* OUT: End of parsed string */ @@ -115457,6 +120917,14 @@ static int sqlite3Prepare( /* assert( !db->mallocFailed ); // not true with SQLITE_USE_ALLOCA */ assert( sqlite3_mutex_held(db->mutex) ); + /* For a long-term use prepared statement avoid the use of + ** lookaside memory. + */ + if( prepFlags & SQLITE_PREPARE_PERSISTENT ){ + sParse.disableLookaside++; + db->lookaside.bDisable++; + } + /* Check to verify that it is possible to get a read lock on all ** database schemas. The inability to get a read lock indicates that ** some other database connection is holding a write-lock, which in @@ -115488,7 +120956,7 @@ static int sqlite3Prepare( if( rc ){ const char *zDb = db->aDb[i].zDbSName; sqlite3ErrorWithMsg(db, rc, "database schema is locked: %s", zDb); - testcase( db->flags & SQLITE_ReadUncommitted ); + testcase( db->flags & SQLITE_ReadUncommit ); goto end_prepare; } } @@ -115536,7 +121004,7 @@ static int sqlite3Prepare( if( rc==SQLITE_OK && sParse.pVdbe && sParse.explain ){ static const char * const azColName[] = { "addr", "opcode", "p1", "p2", "p3", "p4", "p5", "comment", - "selectid", "order", "from", "detail" + "id", "parent", "notused", "detail" }; int iFirst, mx; if( sParse.explain==2 ){ @@ -115556,8 +121024,7 @@ static int sqlite3Prepare( #endif if( db->init.busy==0 ){ - Vdbe *pVdbe = sParse.pVdbe; - sqlite3VdbeSetSql(pVdbe, zSql, (int)(sParse.zTail-zSql), saveSqlFlag); + sqlite3VdbeSetSql(sParse.pVdbe, zSql, (int)(sParse.zTail-zSql), prepFlags); } if( sParse.pVdbe && (rc!=SQLITE_OK || db->mallocFailed) ){ sqlite3VdbeFinalize(sParse.pVdbe); @@ -115583,20 +121050,19 @@ static int sqlite3Prepare( end_prepare: sqlite3ParserReset(&sParse); - rc = sqlite3ApiExit(db, rc); - assert( (rc&db->errMask)==rc ); return rc; } static int sqlite3LockAndPrepare( sqlite3 *db, /* Database handle. */ const char *zSql, /* UTF-8 encoded SQL statement. */ int nBytes, /* Length of zSql in bytes. */ - int saveSqlFlag, /* True to copy SQL text into the sqlite3_stmt */ + u32 prepFlags, /* Zero or more SQLITE_PREPARE_* flags */ Vdbe *pOld, /* VM being reprepared */ sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ const char **pzTail /* OUT: End of parsed string */ ){ int rc; + int cnt = 0; #ifdef SQLITE_ENABLE_API_ARMOR if( ppStmt==0 ) return SQLITE_MISUSE_BKPT; @@ -115607,14 +121073,18 @@ static int sqlite3LockAndPrepare( } sqlite3_mutex_enter(db->mutex); sqlite3BtreeEnterAll(db); - rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail); - if( rc==SQLITE_SCHEMA ){ - sqlite3_finalize(*ppStmt); - rc = sqlite3Prepare(db, zSql, nBytes, saveSqlFlag, pOld, ppStmt, pzTail); - } + do{ + /* Make multiple attempts to compile the SQL, until it either succeeds + ** or encounters a permanent error. A schema problem after one schema + ** reset is considered a permanent error. */ + rc = sqlite3Prepare(db, zSql, nBytes, prepFlags, pOld, ppStmt, pzTail); + assert( rc==SQLITE_OK || *ppStmt==0 ); + }while( rc==SQLITE_ERROR_RETRY + || (rc==SQLITE_SCHEMA && (sqlite3ResetOneSchema(db,-1), cnt++)==0) ); sqlite3BtreeLeaveAll(db); + rc = sqlite3ApiExit(db, rc); + assert( (rc&db->errMask)==rc ); sqlite3_mutex_leave(db->mutex); - assert( rc==SQLITE_OK || *ppStmt==0 ); return rc; } @@ -115631,13 +121101,15 @@ SQLITE_PRIVATE int sqlite3Reprepare(Vdbe *p){ sqlite3_stmt *pNew; const char *zSql; sqlite3 *db; + u8 prepFlags; assert( sqlite3_mutex_held(sqlite3VdbeDb(p)->mutex) ); zSql = sqlite3_sql((sqlite3_stmt *)p); assert( zSql!=0 ); /* Reprepare only called for prepare_v2() statements */ db = sqlite3VdbeDb(p); assert( sqlite3_mutex_held(db->mutex) ); - rc = sqlite3LockAndPrepare(db, zSql, -1, 0, p, &pNew, 0); + prepFlags = sqlite3VdbePrepareFlags(p); + rc = sqlite3LockAndPrepare(db, zSql, -1, prepFlags, p, &pNew, 0); if( rc ){ if( rc==SQLITE_NOMEM ){ sqlite3OomFault(db); @@ -115683,8 +121155,36 @@ SQLITE_API int sqlite3_prepare_v2( const char **pzTail /* OUT: End of parsed string */ ){ int rc; - rc = sqlite3LockAndPrepare(db,zSql,nBytes,1,0,ppStmt,pzTail); - assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ + /* EVIDENCE-OF: R-37923-12173 The sqlite3_prepare_v2() interface works + ** exactly the same as sqlite3_prepare_v3() with a zero prepFlags + ** parameter. + ** + ** Proof in that the 5th parameter to sqlite3LockAndPrepare is 0 */ + rc = sqlite3LockAndPrepare(db,zSql,nBytes,SQLITE_PREPARE_SAVESQL,0, + ppStmt,pzTail); + assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); + return rc; +} +SQLITE_API int sqlite3_prepare_v3( + sqlite3 *db, /* Database handle. */ + const char *zSql, /* UTF-8 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_* flags */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const char **pzTail /* OUT: End of parsed string */ +){ + int rc; + /* EVIDENCE-OF: R-56861-42673 sqlite3_prepare_v3() differs from + ** sqlite3_prepare_v2() only in having the extra prepFlags parameter, + ** which is a bit array consisting of zero or more of the + ** SQLITE_PREPARE_* flags. + ** + ** Proof by comparison to the implementation of sqlite3_prepare_v2() + ** directly above. */ + rc = sqlite3LockAndPrepare(db,zSql,nBytes, + SQLITE_PREPARE_SAVESQL|(prepFlags&SQLITE_PREPARE_MASK), + 0,ppStmt,pzTail); + assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); return rc; } @@ -115697,7 +121197,7 @@ static int sqlite3Prepare16( sqlite3 *db, /* Database handle. */ const void *zSql, /* UTF-16 encoded SQL statement. */ int nBytes, /* Length of zSql in bytes. */ - int saveSqlFlag, /* True to save SQL text into the sqlite3_stmt */ + u32 prepFlags, /* Zero or more SQLITE_PREPARE_* flags */ sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ const void **pzTail /* OUT: End of parsed string */ ){ @@ -115725,7 +121225,7 @@ static int sqlite3Prepare16( sqlite3_mutex_enter(db->mutex); zSql8 = sqlite3Utf16to8(db, zSql, nBytes, SQLITE_UTF16NATIVE); if( zSql8 ){ - rc = sqlite3LockAndPrepare(db, zSql8, -1, saveSqlFlag, 0, ppStmt, &zTail8); + rc = sqlite3LockAndPrepare(db, zSql8, -1, prepFlags, 0, ppStmt, &zTail8); } if( zTail8 && pzTail ){ @@ -115771,7 +121271,22 @@ SQLITE_API int sqlite3_prepare16_v2( const void **pzTail /* OUT: End of parsed string */ ){ int rc; - rc = sqlite3Prepare16(db,zSql,nBytes,1,ppStmt,pzTail); + rc = sqlite3Prepare16(db,zSql,nBytes,SQLITE_PREPARE_SAVESQL,ppStmt,pzTail); + assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ + return rc; +} +SQLITE_API int sqlite3_prepare16_v3( + sqlite3 *db, /* Database handle. */ + const void *zSql, /* UTF-16 encoded SQL statement. */ + int nBytes, /* Length of zSql in bytes. */ + unsigned int prepFlags, /* Zero or more SQLITE_PREPARE_* flags */ + sqlite3_stmt **ppStmt, /* OUT: A pointer to the prepared statement */ + const void **pzTail /* OUT: End of parsed string */ +){ + int rc; + rc = sqlite3Prepare16(db,zSql,nBytes, + SQLITE_PREPARE_SAVESQL|(prepFlags&SQLITE_PREPARE_MASK), + ppStmt,pzTail); assert( rc==SQLITE_OK || ppStmt==0 || *ppStmt==0 ); /* VERIFY: F13021 */ return rc; } @@ -115803,8 +121318,7 @@ SQLITE_API int sqlite3_prepare16_v2( /***/ int sqlite3SelectTrace = 0; # define SELECTTRACE(K,P,S,X) \ if(sqlite3SelectTrace&(K)) \ - sqlite3DebugPrintf("%*s%s.%p: ",(P)->nSelectIndent*2-2,"",\ - (S)->zSelName,(S)),\ + sqlite3DebugPrintf("%s/%d/%p: ",(S)->zSelName,(P)->addrExplain,(S)),\ sqlite3DebugPrintf X #else # define SELECTTRACE(K,P,S,X) @@ -115827,6 +121341,20 @@ struct DistinctCtx { /* ** An instance of the following object is used to record information about ** the ORDER BY (or GROUP BY) clause of query is being coded. +** +** The aDefer[] array is used by the sorter-references optimization. For +** example, assuming there is no index that can be used for the ORDER BY, +** for the query: +** +** SELECT a, bigblob FROM t1 ORDER BY a LIMIT 10; +** +** it may be more efficient to add just the "a" values to the sorter, and +** retrieve the associated "bigblob" values directly from table t1 as the +** 10 smallest "a" values are extracted from the sorter. +** +** When the sorter-reference optimization is used, there is one entry in the +** aDefer[] array for each database table that may be read as values are +** extracted from the sorter. */ typedef struct SortCtx SortCtx; struct SortCtx { @@ -115839,6 +121367,15 @@ struct SortCtx { int labelDone; /* Jump here when done, ex: LIMIT reached */ u8 sortFlags; /* Zero or more SORTFLAG_* bits */ u8 bOrderedInnerLoop; /* ORDER BY correctly sorts the inner loop */ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + u8 nDefer; /* Number of valid entries in aDefer[] */ + struct DeferredCsr { + Table *pTab; /* Table definition */ + int iCsr; /* Cursor number for table */ + int nKey; /* Number of PK columns for table pTab (>=1) */ + } aDefer[4]; +#endif + struct RowLoadInfo *pDeferredRowLoad; /* Deferred row loading info or NULL */ }; #define SORTFLAG_UseSorter 0x01 /* Use SorterOpen instead of OpenEphemeral */ @@ -115856,9 +121393,8 @@ static void clearSelect(sqlite3 *db, Select *p, int bFree){ sqlite3ExprDelete(db, p->pHaving); sqlite3ExprListDelete(db, p->pOrderBy); sqlite3ExprDelete(db, p->pLimit); - sqlite3ExprDelete(db, p->pOffset); - if( p->pWith ) sqlite3WithDelete(db, p->pWith); - if( bFree ) sqlite3DbFree(db, p); + if( OK_IF_ALWAYS_TRUE(p->pWith) ) sqlite3WithDelete(db, p->pWith); + if( bFree ) sqlite3DbFreeNN(db, p); p = pPrior; bFree = 1; } @@ -115889,19 +121425,18 @@ SQLITE_PRIVATE Select *sqlite3SelectNew( Expr *pHaving, /* the HAVING clause */ ExprList *pOrderBy, /* the ORDER BY clause */ u32 selFlags, /* Flag parameters, such as SF_Distinct */ - Expr *pLimit, /* LIMIT value. NULL means not used */ - Expr *pOffset /* OFFSET value. NULL means no offset */ + Expr *pLimit /* LIMIT value. NULL means not used */ ){ Select *pNew; Select standin; - sqlite3 *db = pParse->db; - pNew = sqlite3DbMallocRawNN(db, sizeof(*pNew) ); + pNew = sqlite3DbMallocRawNN(pParse->db, sizeof(*pNew) ); if( pNew==0 ){ - assert( db->mallocFailed ); + assert( pParse->db->mallocFailed ); pNew = &standin; } if( pEList==0 ){ - pEList = sqlite3ExprListAppend(pParse, 0, sqlite3Expr(db,TK_ASTERISK,0)); + pEList = sqlite3ExprListAppend(pParse, 0, + sqlite3Expr(pParse->db,TK_ASTERISK,0)); } pNew->pEList = pEList; pNew->op = TK_SELECT; @@ -115914,7 +121449,7 @@ SQLITE_PRIVATE Select *sqlite3SelectNew( pNew->addrOpenEphm[0] = -1; pNew->addrOpenEphm[1] = -1; pNew->nSelectRow = 0; - if( pSrc==0 ) pSrc = sqlite3DbMallocZero(db, sizeof(*pSrc)); + if( pSrc==0 ) pSrc = sqlite3DbMallocZero(pParse->db, sizeof(*pSrc)); pNew->pSrc = pSrc; pNew->pWhere = pWhere; pNew->pGroupBy = pGroupBy; @@ -115923,11 +121458,9 @@ SQLITE_PRIVATE Select *sqlite3SelectNew( pNew->pPrior = 0; pNew->pNext = 0; pNew->pLimit = pLimit; - pNew->pOffset = pOffset; pNew->pWith = 0; - assert( pOffset==0 || pLimit!=0 || pParse->nErr>0 || db->mallocFailed!=0 ); - if( db->mallocFailed ) { - clearSelect(db, pNew, pNew!=&standin); + if( pParse->db->mallocFailed ) { + clearSelect(pParse->db, pNew, pNew!=&standin); pNew = 0; }else{ assert( pNew->pSrc!=0 || pParse->nErr>0 ); @@ -115952,7 +121485,7 @@ SQLITE_PRIVATE void sqlite3SelectSetName(Select *p, const char *zName){ ** Delete the given Select structure and all of its substructures. */ SQLITE_PRIVATE void sqlite3SelectDelete(sqlite3 *db, Select *p){ - if( p ) clearSelect(db, p, 1); + if( OK_IF_ALWAYS_TRUE(p) ) clearSelect(db, p, 1); } /* @@ -116169,6 +121702,29 @@ static void setJoinExpr(Expr *p, int iTable){ } } +/* Undo the work of setJoinExpr(). In the expression tree p, convert every +** term that is marked with EP_FromJoin and iRightJoinTable==iTable into +** an ordinary term that omits the EP_FromJoin mark. +** +** This happens when a LEFT JOIN is simplified into an ordinary JOIN. +*/ +static void unsetJoinExpr(Expr *p, int iTable){ + while( p ){ + if( ExprHasProperty(p, EP_FromJoin) + && (iTable<0 || p->iRightJoinTable==iTable) ){ + ExprClearProperty(p, EP_FromJoin); + } + if( p->op==TK_FUNCTION && p->x.pList ){ + int i; + for(i=0; i<p->x.pList->nExpr; i++){ + unsetJoinExpr(p->x.pList->a[i].pExpr, iTable); + } + } + unsetJoinExpr(p->pLeft, iTable); + p = p->pRight; + } +} + /* ** This routine processes the join information for a SELECT statement. ** ON and USING clauses are converted into extra terms of the WHERE clause. @@ -116193,11 +121749,10 @@ static int sqliteProcessJoin(Parse *pParse, Select *p){ pLeft = &pSrc->a[0]; pRight = &pLeft[1]; for(i=0; i<pSrc->nSrc-1; i++, pRight++, pLeft++){ - Table *pLeftTab = pLeft->pTab; Table *pRightTab = pRight->pTab; int isOuter; - if( NEVER(pLeftTab==0 || pRightTab==0) ) continue; + if( NEVER(pLeft->pTab==0 || pRightTab==0) ) continue; isOuter = (pRight->fg.jointype & JT_OUTER)!=0; /* When the NATURAL keyword is present, add WHERE clause terms for @@ -116280,6 +121835,62 @@ static KeyInfo *keyInfoFromExprList( ); /* +** An instance of this object holds information (beyond pParse and pSelect) +** needed to load the next result row that is to be added to the sorter. +*/ +typedef struct RowLoadInfo RowLoadInfo; +struct RowLoadInfo { + int regResult; /* Store results in array of registers here */ + u8 ecelFlags; /* Flag argument to ExprCodeExprList() */ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + ExprList *pExtra; /* Extra columns needed by sorter refs */ + int regExtraResult; /* Where to load the extra columns */ +#endif +}; + +/* +** This routine does the work of loading query data into an array of +** registers so that it can be added to the sorter. +*/ +static void innerLoopLoadRow( + Parse *pParse, /* Statement under construction */ + Select *pSelect, /* The query being coded */ + RowLoadInfo *pInfo /* Info needed to complete the row load */ +){ + sqlite3ExprCodeExprList(pParse, pSelect->pEList, pInfo->regResult, + 0, pInfo->ecelFlags); +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( pInfo->pExtra ){ + sqlite3ExprCodeExprList(pParse, pInfo->pExtra, pInfo->regExtraResult, 0, 0); + sqlite3ExprListDelete(pParse->db, pInfo->pExtra); + } +#endif +} + +/* +** Code the OP_MakeRecord instruction that generates the entry to be +** added into the sorter. +** +** Return the register in which the result is stored. +*/ +static int makeSorterRecord( + Parse *pParse, + SortCtx *pSort, + Select *pSelect, + int regBase, + int nBase +){ + int nOBSat = pSort->nOBSat; + Vdbe *v = pParse->pVdbe; + int regOut = ++pParse->nMem; + if( pSort->pDeferredRowLoad ){ + innerLoopLoadRow(pParse, pSelect, pSort->pDeferredRowLoad); + } + sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regOut); + return regOut; +} + +/* ** Generate code that will push the record in registers regData ** through regData+nData-1 onto the sorter. */ @@ -116289,7 +121900,7 @@ static void pushOntoSorter( Select *pSelect, /* The whole SELECT statement */ int regData, /* First register holding data to be sorted */ int regOrigData, /* First register holding data before packing */ - int nData, /* Number of elements in the data array */ + int nData, /* Number of elements in the regData data array */ int nPrefixReg /* No. of reg prior to regData available for use */ ){ Vdbe *v = pParse->pVdbe; /* Stmt under construction */ @@ -116297,16 +121908,32 @@ static void pushOntoSorter( int nExpr = pSort->pOrderBy->nExpr; /* No. of ORDER BY terms */ int nBase = nExpr + bSeq + nData; /* Fields in sorter record */ int regBase; /* Regs for sorter record */ - int regRecord = ++pParse->nMem; /* Assembled sorter record */ + int regRecord = 0; /* Assembled sorter record */ int nOBSat = pSort->nOBSat; /* ORDER BY terms to skip */ int op; /* Opcode to add sorter record to sorter */ int iLimit; /* LIMIT counter */ + int iSkip = 0; /* End of the sorter insert loop */ assert( bSeq==0 || bSeq==1 ); + + /* Three cases: + ** (1) The data to be sorted has already been packed into a Record + ** by a prior OP_MakeRecord. In this case nData==1 and regData + ** will be completely unrelated to regOrigData. + ** (2) All output columns are included in the sort record. In that + ** case regData==regOrigData. + ** (3) Some output columns are omitted from the sort record due to + ** the SQLITE_ENABLE_SORTER_REFERENCE optimization, or due to the + ** SQLITE_ECEL_OMITREF optimization, or due to the + ** SortCtx.pDeferredRowLoad optimiation. In any of these cases + ** regOrigData is 0 to prevent this routine from trying to copy + ** values that might not yet exist. + */ assert( nData==1 || regData==regOrigData || regOrigData==0 ); + if( nPrefixReg ){ assert( nPrefixReg==nExpr+bSeq ); - regBase = regData - nExpr - bSeq; + regBase = regData - nPrefixReg; }else{ regBase = pParse->nMem + 1; pParse->nMem += nBase; @@ -116322,7 +121949,6 @@ static void pushOntoSorter( if( nPrefixReg==0 && nData>0 ){ sqlite3ExprCodeMove(pParse, regData, regBase+nExpr+bSeq, nData); } - sqlite3VdbeAddOp3(v, OP_MakeRecord, regBase+nOBSat, nBase-nOBSat, regRecord); if( nOBSat>0 ){ int regPrevKey; /* The first nOBSat columns of the previous row */ int addrFirst; /* Address of the OP_IfNot opcode */ @@ -116331,6 +121957,7 @@ static void pushOntoSorter( int nKey; /* Number of sorting key columns, including OP_Sequence */ KeyInfo *pKI; /* Original KeyInfo on the sorter table */ + regRecord = makeSorterRecord(pParse, pSort, pSelect, regBase, nBase); regPrevKey = pParse->nMem+1; pParse->nMem += pSort->nOBSat; nKey = nExpr - pSort->nOBSat + bSeq; @@ -116345,11 +121972,11 @@ static void pushOntoSorter( if( pParse->db->mallocFailed ) return; pOp->p2 = nKey + nData; pKI = pOp->p4.pKeyInfo; - memset(pKI->aSortOrder, 0, pKI->nField); /* Makes OP_Jump below testable */ + memset(pKI->aSortOrder, 0, pKI->nKeyField); /* Makes OP_Jump testable */ sqlite3VdbeChangeP4(v, -1, (char*)pKI, P4_KEYINFO); - testcase( pKI->nXField>2 ); + testcase( pKI->nAllField > pKI->nKeyField+2 ); pOp->p4.pKeyInfo = keyInfoFromExprList(pParse, pSort->pOrderBy, nOBSat, - pKI->nXField-1); + pKI->nAllField-pKI->nKeyField-1); addrJmp = sqlite3VdbeCurrentAddr(v); sqlite3VdbeAddOp3(v, OP_Jump, addrJmp+1, 0, addrJmp+1); VdbeCoverage(v); pSort->labelBkOut = sqlite3VdbeMakeLabel(v); @@ -116364,6 +121991,34 @@ static void pushOntoSorter( sqlite3ExprCodeMove(pParse, regBase, regPrevKey, pSort->nOBSat); sqlite3VdbeJumpHere(v, addrJmp); } + if( iLimit ){ + /* At this point the values for the new sorter entry are stored + ** in an array of registers. They need to be composed into a record + ** and inserted into the sorter if either (a) there are currently + ** less than LIMIT+OFFSET items or (b) the new record is smaller than + ** the largest record currently in the sorter. If (b) is true and there + ** are already LIMIT+OFFSET items in the sorter, delete the largest + ** entry before inserting the new one. This way there are never more + ** than LIMIT+OFFSET items in the sorter. + ** + ** If the new record does not need to be inserted into the sorter, + ** jump to the next iteration of the loop. Or, if the + ** pSort->bOrderedInnerLoop flag is set to indicate that the inner + ** loop delivers items in sorted order, jump to the next iteration + ** of the outer loop. + */ + int iCsr = pSort->iECursor; + sqlite3VdbeAddOp2(v, OP_IfNotZero, iLimit, sqlite3VdbeCurrentAddr(v)+4); + VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Last, iCsr, 0); + iSkip = sqlite3VdbeAddOp4Int(v, OP_IdxLE, + iCsr, 0, regBase+nOBSat, nExpr-nOBSat); + VdbeCoverage(v); + sqlite3VdbeAddOp1(v, OP_Delete, iCsr); + } + if( regRecord==0 ){ + regRecord = makeSorterRecord(pParse, pSort, pSelect, regBase, nBase); + } if( pSort->sortFlags & SORTFLAG_UseSorter ){ op = OP_SorterInsert; }else{ @@ -116371,33 +122026,10 @@ static void pushOntoSorter( } sqlite3VdbeAddOp4Int(v, op, pSort->iECursor, regRecord, regBase+nOBSat, nBase-nOBSat); - if( iLimit ){ - int addr; - int r1 = 0; - /* Fill the sorter until it contains LIMIT+OFFSET entries. (The iLimit - ** register is initialized with value of LIMIT+OFFSET.) After the sorter - ** fills up, delete the least entry in the sorter after each insert. - ** Thus we never hold more than the LIMIT+OFFSET rows in memory at once */ - addr = sqlite3VdbeAddOp1(v, OP_IfNotZero, iLimit); VdbeCoverage(v); - sqlite3VdbeAddOp1(v, OP_Last, pSort->iECursor); - if( pSort->bOrderedInnerLoop ){ - r1 = ++pParse->nMem; - sqlite3VdbeAddOp3(v, OP_Column, pSort->iECursor, nExpr, r1); - VdbeComment((v, "seq")); - } - sqlite3VdbeAddOp1(v, OP_Delete, pSort->iECursor); - if( pSort->bOrderedInnerLoop ){ - /* If the inner loop is driven by an index such that values from - ** the same iteration of the inner loop are in sorted order, then - ** immediately jump to the next iteration of an inner loop if the - ** entry from the current iteration does not fit into the top - ** LIMIT+OFFSET entries of the sorter. */ - int iBrk = sqlite3VdbeCurrentAddr(v) + 2; - sqlite3VdbeAddOp3(v, OP_Eq, regBase+nExpr, iBrk, r1); - sqlite3VdbeChangeP5(v, SQLITE_NULLEQ); - VdbeCoverage(v); - } - sqlite3VdbeJumpHere(v, addr); + if( iSkip ){ + assert( pSort->bOrderedInnerLoop==0 || pSort->bOrderedInnerLoop==1 ); + sqlite3VdbeChangeP2(v, iSkip, + sqlite3VdbeCurrentAddr(v) + pSort->bOrderedInnerLoop); } } @@ -116443,20 +122075,100 @@ static void codeDistinct( sqlite3ReleaseTempReg(pParse, r1); } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES +/* +** This function is called as part of inner-loop generation for a SELECT +** statement with an ORDER BY that is not optimized by an index. It +** determines the expressions, if any, that the sorter-reference +** optimization should be used for. The sorter-reference optimization +** is used for SELECT queries like: +** +** SELECT a, bigblob FROM t1 ORDER BY a LIMIT 10 +** +** If the optimization is used for expression "bigblob", then instead of +** storing values read from that column in the sorter records, the PK of +** the row from table t1 is stored instead. Then, as records are extracted from +** the sorter to return to the user, the required value of bigblob is +** retrieved directly from table t1. If the values are very large, this +** can be more efficient than storing them directly in the sorter records. +** +** The ExprList_item.bSorterRef flag is set for each expression in pEList +** for which the sorter-reference optimization should be enabled. +** Additionally, the pSort->aDefer[] array is populated with entries +** for all cursors required to evaluate all selected expressions. Finally. +** output variable (*ppExtra) is set to an expression list containing +** expressions for all extra PK values that should be stored in the +** sorter records. +*/ +static void selectExprDefer( + Parse *pParse, /* Leave any error here */ + SortCtx *pSort, /* Sorter context */ + ExprList *pEList, /* Expressions destined for sorter */ + ExprList **ppExtra /* Expressions to append to sorter record */ +){ + int i; + int nDefer = 0; + ExprList *pExtra = 0; + for(i=0; i<pEList->nExpr; i++){ + struct ExprList_item *pItem = &pEList->a[i]; + if( pItem->u.x.iOrderByCol==0 ){ + Expr *pExpr = pItem->pExpr; + Table *pTab = pExpr->pTab; + if( pExpr->op==TK_COLUMN && pExpr->iColumn>=0 && pTab && !IsVirtual(pTab) + && (pTab->aCol[pExpr->iColumn].colFlags & COLFLAG_SORTERREF) + ){ + int j; + for(j=0; j<nDefer; j++){ + if( pSort->aDefer[j].iCsr==pExpr->iTable ) break; + } + if( j==nDefer ){ + if( nDefer==ArraySize(pSort->aDefer) ){ + continue; + }else{ + int nKey = 1; + int k; + Index *pPk = 0; + if( !HasRowid(pTab) ){ + pPk = sqlite3PrimaryKeyIndex(pTab); + nKey = pPk->nKeyCol; + } + for(k=0; k<nKey; k++){ + Expr *pNew = sqlite3PExpr(pParse, TK_COLUMN, 0, 0); + if( pNew ){ + pNew->iTable = pExpr->iTable; + pNew->pTab = pExpr->pTab; + pNew->iColumn = pPk ? pPk->aiColumn[k] : -1; + pExtra = sqlite3ExprListAppend(pParse, pExtra, pNew); + } + } + pSort->aDefer[nDefer].pTab = pExpr->pTab; + pSort->aDefer[nDefer].iCsr = pExpr->iTable; + pSort->aDefer[nDefer].nKey = nKey; + nDefer++; + } + } + pItem->bSorterRef = 1; + } + } + } + pSort->nDefer = (u8)nDefer; + *ppExtra = pExtra; +} +#endif + /* ** This routine generates the code for the inside of the inner loop ** of a SELECT. ** -** If srcTab is negative, then the pEList expressions +** If srcTab is negative, then the p->pEList expressions ** are evaluated in order to get the data for this row. If srcTab is -** zero or more, then data is pulled from srcTab and pEList is used only +** zero or more, then data is pulled from srcTab and p->pEList is used only ** to get the number of columns and the collation sequence for each column. */ static void selectInnerLoop( Parse *pParse, /* The parser context */ Select *p, /* The complete select statement being coded */ - ExprList *pEList, /* List of values being extracted */ - int srcTab, /* Pull data from this table */ + int srcTab, /* Pull data from this table if non-negative */ SortCtx *pSort, /* If not NULL, info on how to process ORDER BY */ DistinctCtx *pDistinct, /* If not NULL, info on how to process DISTINCT */ SelectDest *pDest, /* How to dispose of the results */ @@ -116470,6 +122182,7 @@ static void selectInnerLoop( int iParm = pDest->iSDParm; /* First argument to disposal method */ int nResultCol; /* Number of result columns */ int nPrefixReg = 0; /* Number of extra registers before regResult */ + RowLoadInfo sRowLoadInfo; /* Info for deferred row loading */ /* Usually, regResult is the first cell in an array of memory cells ** containing the current result row. In this case regOrig is set to the @@ -116480,7 +122193,7 @@ static void selectInnerLoop( int regOrig; /* Start of memory holding full result (or 0) */ assert( v ); - assert( pEList!=0 ); + assert( p->pEList!=0 ); hasDistinct = pDistinct ? pDistinct->eTnctType : WHERE_DISTINCT_NOOP; if( pSort && pSort->pOrderBy==0 ) pSort = 0; if( pSort==0 && !hasDistinct ){ @@ -116490,7 +122203,7 @@ static void selectInnerLoop( /* Pull the requested columns. */ - nResultCol = pEList->nExpr; + nResultCol = p->pEList->nExpr; if( pDest->iSdst==0 ){ if( pSort ){ @@ -116513,37 +122226,92 @@ static void selectInnerLoop( if( srcTab>=0 ){ for(i=0; i<nResultCol; i++){ sqlite3VdbeAddOp3(v, OP_Column, srcTab, i, regResult+i); - VdbeComment((v, "%s", pEList->a[i].zName)); + VdbeComment((v, "%s", p->pEList->a[i].zName)); } }else if( eDest!=SRT_Exists ){ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + ExprList *pExtra = 0; +#endif /* If the destination is an EXISTS(...) expression, the actual ** values returned by the SELECT are not required. */ - u8 ecelFlags; + u8 ecelFlags; /* "ecel" is an abbreviation of "ExprCodeExprList" */ + ExprList *pEList; if( eDest==SRT_Mem || eDest==SRT_Output || eDest==SRT_Coroutine ){ ecelFlags = SQLITE_ECEL_DUP; }else{ ecelFlags = 0; } if( pSort && hasDistinct==0 && eDest!=SRT_EphemTab && eDest!=SRT_Table ){ - /* For each expression in pEList that is a copy of an expression in + /* For each expression in p->pEList that is a copy of an expression in ** the ORDER BY clause (pSort->pOrderBy), set the associated ** iOrderByCol value to one more than the index of the ORDER BY ** expression within the sort-key that pushOntoSorter() will generate. - ** This allows the pEList field to be omitted from the sorted record, + ** This allows the p->pEList field to be omitted from the sorted record, ** saving space and CPU cycles. */ ecelFlags |= (SQLITE_ECEL_OMITREF|SQLITE_ECEL_REF); + for(i=pSort->nOBSat; i<pSort->pOrderBy->nExpr; i++){ int j; if( (j = pSort->pOrderBy->a[i].u.x.iOrderByCol)>0 ){ - pEList->a[j-1].u.x.iOrderByCol = i+1-pSort->nOBSat; + p->pEList->a[j-1].u.x.iOrderByCol = i+1-pSort->nOBSat; } } - regOrig = 0; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + selectExprDefer(pParse, pSort, p->pEList, &pExtra); + if( pExtra && pParse->db->mallocFailed==0 ){ + /* If there are any extra PK columns to add to the sorter records, + ** allocate extra memory cells and adjust the OpenEphemeral + ** instruction to account for the larger records. This is only + ** required if there are one or more WITHOUT ROWID tables with + ** composite primary keys in the SortCtx.aDefer[] array. */ + VdbeOp *pOp = sqlite3VdbeGetOp(v, pSort->addrSortIndex); + pOp->p2 += (pExtra->nExpr - pSort->nDefer); + pOp->p4.pKeyInfo->nAllField += (pExtra->nExpr - pSort->nDefer); + pParse->nMem += pExtra->nExpr; + } +#endif + + /* Adjust nResultCol to account for columns that are omitted + ** from the sorter by the optimizations in this branch */ + pEList = p->pEList; + for(i=0; i<pEList->nExpr; i++){ + if( pEList->a[i].u.x.iOrderByCol>0 +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + || pEList->a[i].bSorterRef +#endif + ){ + nResultCol--; + regOrig = 0; + } + } + + testcase( regOrig ); + testcase( eDest==SRT_Set ); + testcase( eDest==SRT_Mem ); + testcase( eDest==SRT_Coroutine ); + testcase( eDest==SRT_Output ); assert( eDest==SRT_Set || eDest==SRT_Mem || eDest==SRT_Coroutine || eDest==SRT_Output ); } - nResultCol = sqlite3ExprCodeExprList(pParse,pEList,regResult,0,ecelFlags); + sRowLoadInfo.regResult = regResult; + sRowLoadInfo.ecelFlags = ecelFlags; +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + sRowLoadInfo.pExtra = pExtra; + sRowLoadInfo.regExtraResult = regResult + nResultCol; + if( pExtra ) nResultCol += pExtra->nExpr; +#endif + if( p->iLimit + && (ecelFlags & SQLITE_ECEL_OMITREF)!=0 + && nPrefixReg>0 + ){ + assert( pSort!=0 ); + assert( hasDistinct==0 ); + pSort->pDeferredRowLoad = &sRowLoadInfo; + regOrig = 0; + }else{ + innerLoopLoadRow(pParse, p, &sRowLoadInfo); + } } /* If the DISTINCT keyword was present on the SELECT statement @@ -116575,7 +122343,7 @@ static void selectInnerLoop( iJump = sqlite3VdbeCurrentAddr(v) + nResultCol; for(i=0; i<nResultCol; i++){ - CollSeq *pColl = sqlite3ExprCollSeq(pParse, pEList->a[i].pExpr); + CollSeq *pColl = sqlite3ExprCollSeq(pParse, p->pEList->a[i].pExpr); if( i<nResultCol-1 ){ sqlite3VdbeAddOp3(v, OP_Ne, regResult+i, iJump, regPrev+i); VdbeCoverage(v); @@ -116659,7 +122427,8 @@ static void selectInnerLoop( } #endif if( pSort ){ - pushOntoSorter(pParse, pSort, p, r1+nPrefixReg,regResult,1,nPrefixReg); + assert( regResult==regOrig ); + pushOntoSorter(pParse, pSort, p, r1+nPrefixReg, regOrig, 1, nPrefixReg); }else{ int r2 = sqlite3GetTempReg(pParse); sqlite3VdbeAddOp2(v, OP_NewRowid, iParm, r2); @@ -116814,12 +122583,12 @@ static void selectInnerLoop( ** X extra columns. */ SQLITE_PRIVATE KeyInfo *sqlite3KeyInfoAlloc(sqlite3 *db, int N, int X){ - int nExtra = (N+X)*(sizeof(CollSeq*)+1); + int nExtra = (N+X)*(sizeof(CollSeq*)+1) - sizeof(CollSeq*); KeyInfo *p = sqlite3DbMallocRawNN(db, sizeof(KeyInfo) + nExtra); if( p ){ p->aSortOrder = (u8*)&p->aColl[N+X]; - p->nField = (u16)N; - p->nXField = (u16)X; + p->nKeyField = (u16)N; + p->nAllField = (u16)(N+X); p->enc = ENC(db); p->db = db; p->nRef = 1; @@ -116837,7 +122606,7 @@ SQLITE_PRIVATE void sqlite3KeyInfoUnref(KeyInfo *p){ if( p ){ assert( p->nRef>0 ); p->nRef--; - if( p->nRef==0 ) sqlite3DbFree(p->db, p); + if( p->nRef==0 ) sqlite3DbFreeNN(p->db, p); } } @@ -116893,10 +122662,7 @@ static KeyInfo *keyInfoFromExprList( if( pInfo ){ assert( sqlite3KeyInfoIsWriteable(pInfo) ); for(i=iStart, pItem=pList->a+iStart; i<nExpr; i++, pItem++){ - CollSeq *pColl; - pColl = sqlite3ExprCollSeq(pParse, pItem->pExpr); - if( !pColl ) pColl = db->pDfltColl; - pInfo->aColl[i-iStart] = pColl; + pInfo->aColl[i-iStart] = sqlite3ExprNNCollSeq(pParse, pItem->pExpr); pInfo->aSortOrder[i-iStart] = pItem->sortOrder; } } @@ -116929,11 +122695,7 @@ static const char *selectOpName(int id){ ** is determined by the zUsage argument. */ static void explainTempTable(Parse *pParse, const char *zUsage){ - if( pParse->explain==2 ){ - Vdbe *v = pParse->pVdbe; - char *zMsg = sqlite3MPrintf(pParse->db, "USE TEMP B-TREE FOR %s", zUsage); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } + ExplainQueryPlan((pParse, 0, "USE TEMP B-TREE FOR %s", zUsage)); } /* @@ -116951,42 +122713,6 @@ static void explainTempTable(Parse *pParse, const char *zUsage){ # define explainSetInteger(y,z) #endif -#if !defined(SQLITE_OMIT_EXPLAIN) && !defined(SQLITE_OMIT_COMPOUND_SELECT) -/* -** Unless an "EXPLAIN QUERY PLAN" command is being processed, this function -** is a no-op. Otherwise, it adds a single row of output to the EQP result, -** where the caption is of one of the two forms: -** -** "COMPOSITE SUBQUERIES iSub1 and iSub2 (op)" -** "COMPOSITE SUBQUERIES iSub1 and iSub2 USING TEMP B-TREE (op)" -** -** where iSub1 and iSub2 are the integers passed as the corresponding -** function parameters, and op is the text representation of the parameter -** of the same name. The parameter "op" must be one of TK_UNION, TK_EXCEPT, -** TK_INTERSECT or TK_ALL. The first form is used if argument bUseTmp is -** false, or the second form if it is true. -*/ -static void explainComposite( - Parse *pParse, /* Parse context */ - int op, /* One of TK_UNION, TK_EXCEPT etc. */ - int iSub1, /* Subquery id 1 */ - int iSub2, /* Subquery id 2 */ - int bUseTmp /* True if a temp table was used */ -){ - assert( op==TK_UNION || op==TK_EXCEPT || op==TK_INTERSECT || op==TK_ALL ); - if( pParse->explain==2 ){ - Vdbe *v = pParse->pVdbe; - char *zMsg = sqlite3MPrintf( - pParse->db, "COMPOUND SUBQUERIES %d AND %d %s(%s)", iSub1, iSub2, - bUseTmp?"USING TEMP B-TREE ":"", selectOpName(op) - ); - sqlite3VdbeAddOp4(v, OP_Explain, pParse->iSelectId, 0, 0, zMsg, P4_DYNAMIC); - } -} -#else -/* No-op versions of the explainXXX() functions and macros. */ -# define explainComposite(v,w,x,y,z) -#endif /* ** If the inner loop was generated using a non-null pOrderBy argument, @@ -117004,7 +122730,7 @@ static void generateSortTail( Vdbe *v = pParse->pVdbe; /* The prepared statement */ int addrBreak = pSort->labelDone; /* Jump here to exit loop */ int addrContinue = sqlite3VdbeMakeLabel(v); /* Jump here for next cycle */ - int addr; + int addr; /* Top of output loop. Jump for Next. */ int addrOnce = 0; int iTab; ExprList *pOrderBy = pSort->pOrderBy; @@ -117013,11 +122739,11 @@ static void generateSortTail( int regRow; int regRowid; int iCol; - int nKey; + int nKey; /* Number of key columns in sorter record */ int iSortTab; /* Sorter cursor to read from */ - int nSortData; /* Trailing values to read from sorter */ int i; int bSeq; /* True if sorter record includes seq. no. */ + int nRefKey = 0; struct ExprList_item *aOutEx = p->pEList->a; assert( addrBreak<0 ); @@ -117026,15 +122752,24 @@ static void generateSortTail( sqlite3VdbeGoto(v, addrBreak); sqlite3VdbeResolveLabel(v, pSort->labelBkOut); } + +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + /* Open any cursors needed for sorter-reference expressions */ + for(i=0; i<pSort->nDefer; i++){ + Table *pTab = pSort->aDefer[i].pTab; + int iDb = sqlite3SchemaToIndex(pParse->db, pTab->pSchema); + sqlite3OpenTable(pParse, pSort->aDefer[i].iCsr, iDb, pTab, OP_OpenRead); + nRefKey = MAX(nRefKey, pSort->aDefer[i].nKey); + } +#endif + iTab = pSort->iECursor; if( eDest==SRT_Output || eDest==SRT_Coroutine || eDest==SRT_Mem ){ regRowid = 0; regRow = pDest->iSdst; - nSortData = nColumn; }else{ regRowid = sqlite3GetTempReg(pParse); regRow = sqlite3GetTempRange(pParse, nColumn); - nSortData = nColumn; } nKey = pOrderBy->nExpr - pSort->nOBSat; if( pSort->sortFlags & SORTFLAG_UseSorter ){ @@ -117043,7 +122778,8 @@ static void generateSortTail( if( pSort->labelBkOut ){ addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); } - sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, nKey+1+nSortData); + sqlite3VdbeAddOp3(v, OP_OpenPseudo, iSortTab, regSortOut, + nKey+1+nColumn+nRefKey); if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); addr = 1 + sqlite3VdbeAddOp2(v, OP_SorterSort, iTab, addrBreak); VdbeCoverage(v); @@ -117056,15 +122792,59 @@ static void generateSortTail( iSortTab = iTab; bSeq = 1; } - for(i=0, iCol=nKey+bSeq; i<nSortData; i++){ - int iRead; - if( aOutEx[i].u.x.iOrderByCol ){ - iRead = aOutEx[i].u.x.iOrderByCol-1; - }else{ - iRead = iCol++; + for(i=0, iCol=nKey+bSeq-1; i<nColumn; i++){ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( aOutEx[i].bSorterRef ) continue; +#endif + if( aOutEx[i].u.x.iOrderByCol==0 ) iCol++; + } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( pSort->nDefer ){ + int iKey = iCol+1; + int regKey = sqlite3GetTempRange(pParse, nRefKey); + + for(i=0; i<pSort->nDefer; i++){ + int iCsr = pSort->aDefer[i].iCsr; + Table *pTab = pSort->aDefer[i].pTab; + int nKey = pSort->aDefer[i].nKey; + + sqlite3VdbeAddOp1(v, OP_NullRow, iCsr); + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iKey++, regKey); + sqlite3VdbeAddOp3(v, OP_SeekRowid, iCsr, + sqlite3VdbeCurrentAddr(v)+1, regKey); + }else{ + int k; + int iJmp; + assert( sqlite3PrimaryKeyIndex(pTab)->nKeyCol==nKey ); + for(k=0; k<nKey; k++){ + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iKey++, regKey+k); + } + iJmp = sqlite3VdbeCurrentAddr(v); + sqlite3VdbeAddOp4Int(v, OP_SeekGE, iCsr, iJmp+2, regKey, nKey); + sqlite3VdbeAddOp4Int(v, OP_IdxLE, iCsr, iJmp+3, regKey, nKey); + sqlite3VdbeAddOp1(v, OP_NullRow, iCsr); + } + } + sqlite3ReleaseTempRange(pParse, regKey, nRefKey); + } +#endif + for(i=nColumn-1; i>=0; i--){ +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + if( aOutEx[i].bSorterRef ){ + sqlite3ExprCode(pParse, aOutEx[i].pExpr, regRow+i); + }else +#endif + { + int iRead; + if( aOutEx[i].u.x.iOrderByCol ){ + iRead = aOutEx[i].u.x.iOrderByCol-1; + }else{ + iRead = iCol--; + } + sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iRead, regRow+i); + VdbeComment((v, "%s", aOutEx[i].zName?aOutEx[i].zName : aOutEx[i].zSpan)); } - sqlite3VdbeAddOp3(v, OP_Column, iSortTab, iRead, regRow+i); - VdbeComment((v, "%s", aOutEx[i].zName ? aOutEx[i].zName : aOutEx[i].zSpan)); } switch( eDest ){ case SRT_Table: @@ -117146,23 +122926,23 @@ static void generateSortTail( ** the SQLITE_ENABLE_COLUMN_METADATA compile-time option is used. */ #ifdef SQLITE_ENABLE_COLUMN_METADATA -# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,C,D,E,F) +# define columnType(A,B,C,D,E) columnTypeImpl(A,B,C,D,E) #else /* if !defined(SQLITE_ENABLE_COLUMN_METADATA) */ -# define columnType(A,B,C,D,E,F) columnTypeImpl(A,B,F) +# define columnType(A,B,C,D,E) columnTypeImpl(A,B) #endif static const char *columnTypeImpl( NameContext *pNC, +#ifndef SQLITE_ENABLE_COLUMN_METADATA + Expr *pExpr +#else Expr *pExpr, -#ifdef SQLITE_ENABLE_COLUMN_METADATA const char **pzOrigDb, const char **pzOrigTab, - const char **pzOrigCol, + const char **pzOrigCol #endif - u8 *pEstWidth ){ char const *zType = 0; int j; - u8 estWidth = 1; #ifdef SQLITE_ENABLE_COLUMN_METADATA char const *zOrigDb = 0; char const *zOrigTab = 0; @@ -117171,8 +122951,9 @@ static const char *columnTypeImpl( assert( pExpr!=0 ); assert( pNC->pSrcList!=0 ); + assert( pExpr->op!=TK_AGG_COLUMN ); /* This routine runes before aggregates + ** are processed */ switch( pExpr->op ){ - case TK_AGG_COLUMN: case TK_COLUMN: { /* The expression is a column. Locate the table the column is being ** extracted from in NameContext.pSrcList. This table may be real @@ -117181,8 +122962,6 @@ static const char *columnTypeImpl( Table *pTab = 0; /* Table structure column is extracted from */ Select *pS = 0; /* Select the column is extracted from */ int iCol = pExpr->iColumn; /* Index of column in pTab */ - testcase( pExpr->op==TK_AGG_COLUMN ); - testcase( pExpr->op==TK_COLUMN ); while( pNC && !pTab ){ SrcList *pTabList = pNC->pSrcList; for(j=0;j<pTabList->nSrc && pTabList->a[j].iCursor!=pExpr->iTable;j++); @@ -117221,46 +123000,42 @@ static const char *columnTypeImpl( ** of the SELECT statement. Return the declaration type and origin ** data for the result-set column of the sub-select. */ - if( iCol>=0 && ALWAYS(iCol<pS->pEList->nExpr) ){ + if( iCol>=0 && iCol<pS->pEList->nExpr ){ /* If iCol is less than zero, then the expression requests the ** rowid of the sub-select or view. This expression is legal (see ** test case misc2.2.2) - it always evaluates to NULL. - ** - ** The ALWAYS() is because iCol>=pS->pEList->nExpr will have been - ** caught already by name resolution. */ NameContext sNC; Expr *p = pS->pEList->a[iCol].pExpr; sNC.pSrcList = pS->pSrc; sNC.pNext = pNC; sNC.pParse = pNC->pParse; - zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol, &estWidth); + zType = columnType(&sNC, p,&zOrigDb,&zOrigTab,&zOrigCol); } - }else if( pTab->pSchema ){ - /* A real table */ + }else{ + /* A real table or a CTE table */ assert( !pS ); - if( iCol<0 ) iCol = pTab->iPKey; - assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) ); #ifdef SQLITE_ENABLE_COLUMN_METADATA + if( iCol<0 ) iCol = pTab->iPKey; + assert( iCol==XN_ROWID || (iCol>=0 && iCol<pTab->nCol) ); if( iCol<0 ){ zType = "INTEGER"; zOrigCol = "rowid"; }else{ zOrigCol = pTab->aCol[iCol].zName; zType = sqlite3ColumnType(&pTab->aCol[iCol],0); - estWidth = pTab->aCol[iCol].szEst; } zOrigTab = pTab->zName; - if( pNC->pParse ){ + if( pNC->pParse && pTab->pSchema ){ int iDb = sqlite3SchemaToIndex(pNC->pParse->db, pTab->pSchema); zOrigDb = pNC->pParse->db->aDb[iDb].zDbSName; } #else + assert( iCol==XN_ROWID || (iCol>=0 && iCol<pTab->nCol) ); if( iCol<0 ){ zType = "INTEGER"; }else{ zType = sqlite3ColumnType(&pTab->aCol[iCol],0); - estWidth = pTab->aCol[iCol].szEst; } #endif } @@ -117279,7 +123054,7 @@ static const char *columnTypeImpl( sNC.pSrcList = pS->pSrc; sNC.pNext = pNC; sNC.pParse = pNC->pParse; - zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, &estWidth); + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol); break; } #endif @@ -117293,7 +123068,6 @@ static const char *columnTypeImpl( *pzOrigCol = zOrigCol; } #endif - if( pEstWidth ) *pEstWidth = estWidth; return zType; } @@ -117312,6 +123086,7 @@ static void generateColumnTypes( NameContext sNC; sNC.pSrcList = pTabList; sNC.pParse = pParse; + sNC.pNext = 0; for(i=0; i<pEList->nExpr; i++){ Expr *p = pEList->a[i].pExpr; const char *zType; @@ -117319,7 +123094,7 @@ static void generateColumnTypes( const char *zOrigDb = 0; const char *zOrigTab = 0; const char *zOrigCol = 0; - zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol, 0); + zType = columnType(&sNC, p, &zOrigDb, &zOrigTab, &zOrigCol); /* The vdbe must make its own copy of the column-type and other ** column specific strings, in case the schema is reset before this @@ -117329,27 +123104,56 @@ static void generateColumnTypes( sqlite3VdbeSetColName(v, i, COLNAME_TABLE, zOrigTab, SQLITE_TRANSIENT); sqlite3VdbeSetColName(v, i, COLNAME_COLUMN, zOrigCol, SQLITE_TRANSIENT); #else - zType = columnType(&sNC, p, 0, 0, 0, 0); + zType = columnType(&sNC, p, 0, 0, 0); #endif sqlite3VdbeSetColName(v, i, COLNAME_DECLTYPE, zType, SQLITE_TRANSIENT); } #endif /* !defined(SQLITE_OMIT_DECLTYPE) */ } + /* -** Generate code that will tell the VDBE the names of columns -** in the result set. This information is used to provide the -** azCol[] values in the callback. +** Compute the column names for a SELECT statement. +** +** The only guarantee that SQLite makes about column names is that if the +** column has an AS clause assigning it a name, that will be the name used. +** That is the only documented guarantee. However, countless applications +** developed over the years have made baseless assumptions about column names +** and will break if those assumptions changes. Hence, use extreme caution +** when modifying this routine to avoid breaking legacy. +** +** See Also: sqlite3ColumnsFromExprList() +** +** The PRAGMA short_column_names and PRAGMA full_column_names settings are +** deprecated. The default setting is short=ON, full=OFF. 99.9% of all +** applications should operate this way. Nevertheless, we need to support the +** other modes for legacy: +** +** short=OFF, full=OFF: Column name is the text of the expression has it +** originally appears in the SELECT statement. In +** other words, the zSpan of the result expression. +** +** short=ON, full=OFF: (This is the default setting). If the result +** refers directly to a table column, then the +** result column name is just the table column +** name: COLUMN. Otherwise use zSpan. +** +** full=ON, short=ANY: If the result refers directly to a table column, +** then the result column name with the table name +** prefix, ex: TABLE.COLUMN. Otherwise use zSpan. */ static void generateColumnNames( Parse *pParse, /* Parser context */ - SrcList *pTabList, /* List of tables */ - ExprList *pEList /* Expressions defining the result set */ + Select *pSelect /* Generate column names for this SELECT statement */ ){ Vdbe *v = pParse->pVdbe; - int i, j; + int i; + Table *pTab; + SrcList *pTabList; + ExprList *pEList; sqlite3 *db = pParse->db; - int fullNames, shortNames; + int fullName; /* TABLE.COLUMN if no AS clause and is a direct table ref */ + int srcName; /* COLUMN or TABLE.COLUMN if no AS clause and is direct */ #ifndef SQLITE_OMIT_EXPLAIN /* If this is an EXPLAIN, skip this step */ @@ -117358,29 +123162,33 @@ static void generateColumnNames( } #endif - if( pParse->colNamesSet || db->mallocFailed ) return; + if( pParse->colNamesSet ) return; + /* Column names are determined by the left-most term of a compound select */ + while( pSelect->pPrior ) pSelect = pSelect->pPrior; + SELECTTRACE(1,pParse,pSelect,("generating column names\n")); + pTabList = pSelect->pSrc; + pEList = pSelect->pEList; assert( v!=0 ); assert( pTabList!=0 ); pParse->colNamesSet = 1; - fullNames = (db->flags & SQLITE_FullColNames)!=0; - shortNames = (db->flags & SQLITE_ShortColNames)!=0; + fullName = (db->flags & SQLITE_FullColNames)!=0; + srcName = (db->flags & SQLITE_ShortColNames)!=0 || fullName; sqlite3VdbeSetNumCols(v, pEList->nExpr); for(i=0; i<pEList->nExpr; i++){ - Expr *p; - p = pEList->a[i].pExpr; - if( NEVER(p==0) ) continue; + Expr *p = pEList->a[i].pExpr; + + assert( p!=0 ); + assert( p->op!=TK_AGG_COLUMN ); /* Agg processing has not run yet */ + assert( p->op!=TK_COLUMN || p->pTab!=0 ); /* Covering idx not yet coded */ if( pEList->a[i].zName ){ + /* An AS clause always takes first priority */ char *zName = pEList->a[i].zName; sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_TRANSIENT); - }else if( p->op==TK_COLUMN || p->op==TK_AGG_COLUMN ){ - Table *pTab; + }else if( srcName && p->op==TK_COLUMN ){ char *zCol; int iCol = p->iColumn; - for(j=0; ALWAYS(j<pTabList->nSrc); j++){ - if( pTabList->a[j].iCursor==p->iTable ) break; - } - assert( j<pTabList->nSrc ); - pTab = pTabList->a[j].pTab; + pTab = p->pTab; + assert( pTab!=0 ); if( iCol<0 ) iCol = pTab->iPKey; assert( iCol==-1 || (iCol>=0 && iCol<pTab->nCol) ); if( iCol<0 ){ @@ -117388,10 +123196,7 @@ static void generateColumnNames( }else{ zCol = pTab->aCol[iCol].zName; } - if( !shortNames && !fullNames ){ - sqlite3VdbeSetColName(v, i, COLNAME_NAME, - sqlite3DbStrDup(db, pEList->a[i].zSpan), SQLITE_DYNAMIC); - }else if( fullNames ){ + if( fullName ){ char *zName = 0; zName = sqlite3MPrintf(db, "%s.%s", pTab->zName, zCol); sqlite3VdbeSetColName(v, i, COLNAME_NAME, zName, SQLITE_DYNAMIC); @@ -117419,6 +123224,15 @@ static void generateColumnNames( ** ** Return SQLITE_OK on success. If a memory allocation error occurs, ** store NULL in *paCol and 0 in *pnCol and return SQLITE_NOMEM. +** +** The only guarantee that SQLite makes about column names is that if the +** column has an AS clause assigning it a name, that will be the name used. +** That is the only documented guarantee. However, countless applications +** developed over the years have made baseless assumptions about column names +** and will break if those assumptions changes. Hence, use extreme caution +** when modifying this routine to avoid breaking legacy. +** +** See Also: generateColumnNames() */ SQLITE_PRIVATE int sqlite3ColumnsFromExprList( Parse *pParse, /* Parsing context */ @@ -117431,7 +123245,6 @@ SQLITE_PRIVATE int sqlite3ColumnsFromExprList( u32 cnt; /* Index added to make the name unique */ Column *aCol, *pCol; /* For looping over result columns */ int nCol; /* Number of columns in the result set */ - Expr *p; /* Expression for a single result column */ char *zName; /* Column name */ int nName; /* Size of name in zName[] */ Hash ht; /* Hash table of column names */ @@ -117441,6 +123254,7 @@ SQLITE_PRIVATE int sqlite3ColumnsFromExprList( nCol = pEList->nExpr; aCol = sqlite3DbMallocZero(db, sizeof(aCol[0])*nCol); testcase( aCol==0 ); + if( nCol>32767 ) nCol = 32767; }else{ nCol = 0; aCol = 0; @@ -117452,20 +123266,20 @@ SQLITE_PRIVATE int sqlite3ColumnsFromExprList( for(i=0, pCol=aCol; i<nCol && !db->mallocFailed; i++, pCol++){ /* Get an appropriate name for the column */ - p = sqlite3ExprSkipCollate(pEList->a[i].pExpr); if( (zName = pEList->a[i].zName)!=0 ){ /* If the column contains an "AS <name>" phrase, use <name> as the name */ }else{ - Expr *pColExpr = p; /* The expression that is the result column name */ - Table *pTab; /* Table associated with this expression */ + Expr *pColExpr = sqlite3ExprSkipCollate(pEList->a[i].pExpr); while( pColExpr->op==TK_DOT ){ pColExpr = pColExpr->pRight; assert( pColExpr!=0 ); } - if( pColExpr->op==TK_COLUMN && ALWAYS(pColExpr->pTab!=0) ){ + assert( pColExpr->op!=TK_AGG_COLUMN ); + if( pColExpr->op==TK_COLUMN ){ /* For columns use the column name name */ int iCol = pColExpr->iColumn; - pTab = pColExpr->pTab; + Table *pTab = pColExpr->pTab; + assert( pTab!=0 ); if( iCol<0 ) iCol = pTab->iPKey; zName = iCol>=0 ? pTab->aCol[iCol].zName : "rowid"; }else if( pColExpr->op==TK_ID ){ @@ -117476,7 +123290,11 @@ SQLITE_PRIVATE int sqlite3ColumnsFromExprList( zName = pEList->a[i].zSpan; } } - zName = sqlite3MPrintf(db, "%s", zName); + if( zName ){ + zName = sqlite3DbStrDup(db, zName); + }else{ + zName = sqlite3MPrintf(db,"column%d",i+1); + } /* Make sure the column name is unique. If the name is not unique, ** append an integer to the name so that it becomes unique. @@ -117533,7 +123351,6 @@ SQLITE_PRIVATE void sqlite3SelectAddColumnTypeAndCollation( int i; Expr *p; struct ExprList_item *a; - u64 szAll = 0; assert( pSelect!=0 ); assert( (pSelect->selFlags & SF_Resolved)!=0 ); @@ -117546,10 +123363,11 @@ SQLITE_PRIVATE void sqlite3SelectAddColumnTypeAndCollation( const char *zType; int n, m; p = a[i].pExpr; - zType = columnType(&sNC, p, 0, 0, 0, &pCol->szEst); - szAll += pCol->szEst; + zType = columnType(&sNC, p, 0, 0, 0); + /* pCol->szEst = ... // Column size est for SELECT tables never used */ pCol->affinity = sqlite3ExprAffinity(p); - if( zType && (m = sqlite3Strlen30(zType))>0 ){ + if( zType ){ + m = sqlite3Strlen30(zType); n = sqlite3Strlen30(pCol->zName); pCol->zName = sqlite3DbReallocOrFree(db, pCol->zName, n+m+2); if( pCol->zName ){ @@ -117563,7 +123381,7 @@ SQLITE_PRIVATE void sqlite3SelectAddColumnTypeAndCollation( pCol->zColl = sqlite3DbStrDup(db, pColl->zName); } } - pTab->szTabRow = sqlite3LogEst(szAll*4); + pTab->szTabRow = 1; /* Any non-zero value works */ } /* @@ -117606,25 +123424,22 @@ SQLITE_PRIVATE Table *sqlite3ResultSetOfSelect(Parse *pParse, Select *pSelect){ ** Get a VDBE for the given parser context. Create a new one if necessary. ** If an error occurs, return NULL and leave a message in pParse. */ -static SQLITE_NOINLINE Vdbe *allocVdbe(Parse *pParse){ - Vdbe *v = pParse->pVdbe = sqlite3VdbeCreate(pParse); - if( v ) sqlite3VdbeAddOp2(v, OP_Init, 0, 1); +SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){ + if( pParse->pVdbe ){ + return pParse->pVdbe; + } if( pParse->pToplevel==0 && OptimizationEnabled(pParse->db,SQLITE_FactorOutConst) ){ pParse->okConstFactor = 1; } - return v; -} -SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){ - Vdbe *v = pParse->pVdbe; - return v ? v : allocVdbe(pParse); + return sqlite3VdbeCreate(pParse); } /* ** Compute the iLimit and iOffset fields of the SELECT based on the -** pLimit and pOffset expressions. pLimit and pOffset hold the expressions +** pLimit expressions. pLimit->pLeft and pLimit->pRight hold the expressions ** that appear in the original SQL statement after the LIMIT and OFFSET ** keywords. Or NULL if those keywords are omitted. iLimit and iOffset ** are the integer memory register numbers for counters used to compute @@ -117632,15 +123447,15 @@ SQLITE_PRIVATE Vdbe *sqlite3GetVdbe(Parse *pParse){ ** iLimit and iOffset are negative. ** ** This routine changes the values of iLimit and iOffset only if -** a limit or offset is defined by pLimit and pOffset. iLimit and -** iOffset should have been preset to appropriate default values (zero) +** a limit or offset is defined by pLimit->pLeft and pLimit->pRight. iLimit +** and iOffset should have been preset to appropriate default values (zero) ** prior to calling this routine. ** ** The iOffset register (if it exists) is initialized to the value ** of the OFFSET. The iLimit register is initialized to LIMIT. Register ** iOffset+1 is initialized to LIMIT+OFFSET. ** -** Only if pLimit!=0 or pOffset!=0 do the limit registers get +** Only if pLimit->pLeft!=0 do the limit registers get ** redefined. The UNION ALL operator uses this property to force ** the reuse of the same limit and offset registers across multiple ** SELECT statements. @@ -117650,6 +123465,8 @@ static void computeLimitRegisters(Parse *pParse, Select *p, int iBreak){ int iLimit = 0; int iOffset; int n; + Expr *pLimit = p->pLimit; + if( p->iLimit ) return; /* @@ -117659,12 +123476,13 @@ static void computeLimitRegisters(Parse *pParse, Select *p, int iBreak){ ** no rows. */ sqlite3ExprCacheClear(pParse); - assert( p->pOffset==0 || p->pLimit!=0 ); - if( p->pLimit ){ + if( pLimit ){ + assert( pLimit->op==TK_LIMIT ); + assert( pLimit->pLeft!=0 ); p->iLimit = iLimit = ++pParse->nMem; v = sqlite3GetVdbe(pParse); assert( v!=0 ); - if( sqlite3ExprIsInteger(p->pLimit, &n) ){ + if( sqlite3ExprIsInteger(pLimit->pLeft, &n) ){ sqlite3VdbeAddOp2(v, OP_Integer, n, iLimit); VdbeComment((v, "LIMIT counter")); if( n==0 ){ @@ -117674,15 +123492,15 @@ static void computeLimitRegisters(Parse *pParse, Select *p, int iBreak){ p->selFlags |= SF_FixedLimit; } }else{ - sqlite3ExprCode(pParse, p->pLimit, iLimit); + sqlite3ExprCode(pParse, pLimit->pLeft, iLimit); sqlite3VdbeAddOp1(v, OP_MustBeInt, iLimit); VdbeCoverage(v); VdbeComment((v, "LIMIT counter")); sqlite3VdbeAddOp2(v, OP_IfNot, iLimit, iBreak); VdbeCoverage(v); } - if( p->pOffset ){ + if( pLimit->pRight ){ p->iOffset = iOffset = ++pParse->nMem; pParse->nMem++; /* Allocate an extra register for limit+offset */ - sqlite3ExprCode(pParse, p->pOffset, iOffset); + sqlite3ExprCode(pParse, pLimit->pRight, iOffset); sqlite3VdbeAddOp1(v, OP_MustBeInt, iOffset); VdbeCoverage(v); VdbeComment((v, "OFFSET counter")); sqlite3VdbeAddOp3(v, OP_OffsetLimit, iLimit, iOffset+1, iOffset); @@ -117812,7 +123630,7 @@ static void generateWithRecursiveQuery( int i; /* Loop counter */ int rc; /* Result code */ ExprList *pOrderBy; /* The ORDER BY clause */ - Expr *pLimit, *pOffset; /* Saved LIMIT and OFFSET */ + Expr *pLimit; /* Saved LIMIT and OFFSET */ int regLimit, regOffset; /* Registers used by LIMIT and OFFSET */ /* Obtain authorization to do a recursive query */ @@ -117823,10 +123641,9 @@ static void generateWithRecursiveQuery( p->nSelectRow = 320; /* 4 billion rows */ computeLimitRegisters(pParse, p, addrBreak); pLimit = p->pLimit; - pOffset = p->pOffset; regLimit = p->iLimit; regOffset = p->iOffset; - p->pLimit = p->pOffset = 0; + p->pLimit = 0; p->iLimit = p->iOffset = 0; pOrderBy = p->pOrderBy; @@ -117872,6 +123689,7 @@ static void generateWithRecursiveQuery( /* Store the results of the setup-query in Queue. */ pSetup->pNext = 0; + ExplainQueryPlan((pParse, 1, "SETUP")); rc = sqlite3Select(pParse, pSetup, &destQueue); pSetup->pNext = p; if( rc ) goto end_of_recursive_query; @@ -117891,7 +123709,7 @@ static void generateWithRecursiveQuery( /* Output the single row in Current */ addrCont = sqlite3VdbeMakeLabel(v); codeOffset(v, regOffset, addrCont); - selectInnerLoop(pParse, p, p->pEList, iCurrent, + selectInnerLoop(pParse, p, iCurrent, 0, 0, pDest, addrCont, addrBreak); if( regLimit ){ sqlite3VdbeAddOp2(v, OP_DecrJumpZero, regLimit, addrBreak); @@ -117906,6 +123724,7 @@ static void generateWithRecursiveQuery( sqlite3ErrorMsg(pParse, "recursive aggregate queries not supported"); }else{ p->pPrior = 0; + ExplainQueryPlan((pParse, 1, "RECURSIVE STEP")); sqlite3Select(pParse, p, &destQueue); assert( p->pPrior==0 ); p->pPrior = pSetup; @@ -117919,7 +123738,6 @@ end_of_recursive_query: sqlite3ExprListDelete(pParse->db, p->pOrderBy); p->pOrderBy = pOrderBy; p->pLimit = pLimit; - p->pOffset = pOffset; return; } #endif /* SQLITE_OMIT_CTE */ @@ -117938,36 +123756,38 @@ static int multiSelectOrderBy( ** on a VALUES clause. ** ** Because the Select object originates from a VALUES clause: -** (1) It has no LIMIT or OFFSET +** (1) There is no LIMIT or OFFSET or else there is a LIMIT of exactly 1 ** (2) All terms are UNION ALL ** (3) There is no ORDER BY clause +** +** The "LIMIT of exactly 1" case of condition (1) comes about when a VALUES +** clause occurs within scalar expression (ex: "SELECT (VALUES(1),(2),(3))"). +** The sqlite3CodeSubselect will have added the LIMIT 1 clause in tht case. +** Since the limit is exactly 1, we only need to evalutes the left-most VALUES. */ static int multiSelectValues( Parse *pParse, /* Parsing context */ Select *p, /* The right-most of SELECTs to be coded */ SelectDest *pDest /* What to do with query results */ ){ - Select *pPrior; int nRow = 1; int rc = 0; + int bShowAll = p->pLimit==0; assert( p->selFlags & SF_MultiValue ); do{ assert( p->selFlags & SF_Values ); assert( p->op==TK_ALL || (p->op==TK_SELECT && p->pPrior==0) ); - assert( p->pLimit==0 ); - assert( p->pOffset==0 ); assert( p->pNext==0 || p->pEList->nExpr==p->pNext->pEList->nExpr ); if( p->pPrior==0 ) break; assert( p->pPrior->pNext==p ); p = p->pPrior; - nRow++; + nRow += bShowAll; }while(1); + ExplainQueryPlan((pParse, 0, "SCAN %d CONSTANT ROW%s", nRow, + nRow==1 ? "" : "S")); while( p ){ - pPrior = p->pPrior; - p->pPrior = 0; - rc = sqlite3Select(pParse, p, pDest); - p->pPrior = pPrior; - if( rc ) break; + selectInnerLoop(pParse, p, -1, 0, 0, pDest, 1, 1); + if( !bShowAll ) break; p->nSelectRow = nRow; p = p->pNext; } @@ -118016,10 +123836,6 @@ static int multiSelect( SelectDest dest; /* Alternative data destination */ Select *pDelete = 0; /* Chain of simple selects to delete */ sqlite3 *db; /* Database connection */ -#ifndef SQLITE_OMIT_EXPLAIN - int iSub1 = 0; /* EQP id of left-hand query */ - int iSub2 = 0; /* EQP id of right-hand query */ -#endif /* Make sure there is no ORDER BY or LIMIT clause on prior SELECTs. Only ** the last (right-most) SELECT in the series may have an ORDER BY or LIMIT. @@ -118029,15 +123845,9 @@ static int multiSelect( db = pParse->db; pPrior = p->pPrior; dest = *pDest; - if( pPrior->pOrderBy ){ - sqlite3ErrorMsg(pParse,"ORDER BY clause should come after %s not before", - selectOpName(p->op)); - rc = 1; - goto multi_select_end; - } - if( pPrior->pLimit ){ - sqlite3ErrorMsg(pParse,"LIMIT clause should come after %s not before", - selectOpName(p->op)); + if( pPrior->pOrderBy || pPrior->pLimit ){ + sqlite3ErrorMsg(pParse,"%s clause should come after %s not before", + pPrior->pOrderBy!=0 ? "ORDER BY" : "LIMIT", selectOpName(p->op)); rc = 1; goto multi_select_end; } @@ -118076,236 +123886,231 @@ static int multiSelect( */ if( p->pOrderBy ){ return multiSelectOrderBy(pParse, p, pDest); - }else + }else{ - /* Generate code for the left and right SELECT statements. - */ - switch( p->op ){ - case TK_ALL: { - int addr = 0; - int nLimit; - assert( !pPrior->pLimit ); - pPrior->iLimit = p->iLimit; - pPrior->iOffset = p->iOffset; - pPrior->pLimit = p->pLimit; - pPrior->pOffset = p->pOffset; - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &dest); - p->pLimit = 0; - p->pOffset = 0; - if( rc ){ - goto multi_select_end; - } - p->pPrior = 0; - p->iLimit = pPrior->iLimit; - p->iOffset = pPrior->iOffset; - if( p->iLimit ){ - addr = sqlite3VdbeAddOp1(v, OP_IfNot, p->iLimit); VdbeCoverage(v); - VdbeComment((v, "Jump ahead if LIMIT reached")); - if( p->iOffset ){ - sqlite3VdbeAddOp3(v, OP_OffsetLimit, - p->iLimit, p->iOffset+1, p->iOffset); +#ifndef SQLITE_OMIT_EXPLAIN + if( pPrior->pPrior==0 ){ + ExplainQueryPlan((pParse, 1, "COMPOUND QUERY")); + ExplainQueryPlan((pParse, 1, "LEFT-MOST SUBQUERY")); + } +#endif + + /* Generate code for the left and right SELECT statements. + */ + switch( p->op ){ + case TK_ALL: { + int addr = 0; + int nLimit; + assert( !pPrior->pLimit ); + pPrior->iLimit = p->iLimit; + pPrior->iOffset = p->iOffset; + pPrior->pLimit = p->pLimit; + rc = sqlite3Select(pParse, pPrior, &dest); + p->pLimit = 0; + if( rc ){ + goto multi_select_end; + } + p->pPrior = 0; + p->iLimit = pPrior->iLimit; + p->iOffset = pPrior->iOffset; + if( p->iLimit ){ + addr = sqlite3VdbeAddOp1(v, OP_IfNot, p->iLimit); VdbeCoverage(v); + VdbeComment((v, "Jump ahead if LIMIT reached")); + if( p->iOffset ){ + sqlite3VdbeAddOp3(v, OP_OffsetLimit, + p->iLimit, p->iOffset+1, p->iOffset); + } } + ExplainQueryPlan((pParse, 1, "UNION ALL")); + rc = sqlite3Select(pParse, p, &dest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); + if( pPrior->pLimit + && sqlite3ExprIsInteger(pPrior->pLimit->pLeft, &nLimit) + && nLimit>0 && p->nSelectRow > sqlite3LogEst((u64)nLimit) + ){ + p->nSelectRow = sqlite3LogEst((u64)nLimit); + } + if( addr ){ + sqlite3VdbeJumpHere(v, addr); + } + break; } - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &dest); - testcase( rc!=SQLITE_OK ); - pDelete = p->pPrior; - p->pPrior = pPrior; - p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); - if( pPrior->pLimit - && sqlite3ExprIsInteger(pPrior->pLimit, &nLimit) - && nLimit>0 && p->nSelectRow > sqlite3LogEst((u64)nLimit) - ){ - p->nSelectRow = sqlite3LogEst((u64)nLimit); - } - if( addr ){ - sqlite3VdbeJumpHere(v, addr); - } - break; - } - case TK_EXCEPT: - case TK_UNION: { - int unionTab; /* Cursor number of the temporary table holding result */ - u8 op = 0; /* One of the SRT_ operations to apply to self */ - int priorOp; /* The SRT_ operation to apply to prior selects */ - Expr *pLimit, *pOffset; /* Saved values of p->nLimit and p->nOffset */ - int addr; - SelectDest uniondest; - - testcase( p->op==TK_EXCEPT ); - testcase( p->op==TK_UNION ); - priorOp = SRT_Union; - if( dest.eDest==priorOp ){ - /* We can reuse a temporary table generated by a SELECT to our - ** right. + case TK_EXCEPT: + case TK_UNION: { + int unionTab; /* Cursor number of the temp table holding result */ + u8 op = 0; /* One of the SRT_ operations to apply to self */ + int priorOp; /* The SRT_ operation to apply to prior selects */ + Expr *pLimit; /* Saved values of p->nLimit */ + int addr; + SelectDest uniondest; + + testcase( p->op==TK_EXCEPT ); + testcase( p->op==TK_UNION ); + priorOp = SRT_Union; + if( dest.eDest==priorOp ){ + /* We can reuse a temporary table generated by a SELECT to our + ** right. + */ + assert( p->pLimit==0 ); /* Not allowed on leftward elements */ + unionTab = dest.iSDParm; + }else{ + /* We will need to create our own temporary table to hold the + ** intermediate results. + */ + unionTab = pParse->nTab++; + assert( p->pOrderBy==0 ); + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0); + assert( p->addrOpenEphm[0] == -1 ); + p->addrOpenEphm[0] = addr; + findRightmost(p)->selFlags |= SF_UsesEphemeral; + assert( p->pEList ); + } + + /* Code the SELECT statements to our left */ - assert( p->pLimit==0 ); /* Not allowed on leftward elements */ - assert( p->pOffset==0 ); /* Not allowed on leftward elements */ - unionTab = dest.iSDParm; - }else{ - /* We will need to create our own temporary table to hold the - ** intermediate results. + assert( !pPrior->pOrderBy ); + sqlite3SelectDestInit(&uniondest, priorOp, unionTab); + rc = sqlite3Select(pParse, pPrior, &uniondest); + if( rc ){ + goto multi_select_end; + } + + /* Code the current SELECT statement */ - unionTab = pParse->nTab++; + if( p->op==TK_EXCEPT ){ + op = SRT_Except; + }else{ + assert( p->op==TK_UNION ); + op = SRT_Union; + } + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + uniondest.eDest = op; + ExplainQueryPlan((pParse, 1, "%s USING TEMP B-TREE", + selectOpName(p->op))); + rc = sqlite3Select(pParse, p, &uniondest); + testcase( rc!=SQLITE_OK ); + /* Query flattening in sqlite3Select() might refill p->pOrderBy. + ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ + sqlite3ExprListDelete(db, p->pOrderBy); + pDelete = p->pPrior; + p->pPrior = pPrior; + p->pOrderBy = 0; + if( p->op==TK_UNION ){ + p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); + } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + p->iLimit = 0; + p->iOffset = 0; + + /* Convert the data in the temporary table into whatever form + ** it is that we currently need. + */ + assert( unionTab==dest.iSDParm || dest.eDest!=priorOp ); + if( dest.eDest!=priorOp ){ + int iCont, iBreak, iStart; + assert( p->pEList ); + iBreak = sqlite3VdbeMakeLabel(v); + iCont = sqlite3VdbeMakeLabel(v); + computeLimitRegisters(pParse, p, iBreak); + sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v); + iStart = sqlite3VdbeCurrentAddr(v); + selectInnerLoop(pParse, p, unionTab, + 0, 0, &dest, iCont, iBreak); + sqlite3VdbeResolveLabel(v, iCont); + sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v); + sqlite3VdbeResolveLabel(v, iBreak); + sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0); + } + break; + } + default: assert( p->op==TK_INTERSECT ); { + int tab1, tab2; + int iCont, iBreak, iStart; + Expr *pLimit; + int addr; + SelectDest intersectdest; + int r1; + + /* INTERSECT is different from the others since it requires + ** two temporary tables. Hence it has its own case. Begin + ** by allocating the tables we will need. + */ + tab1 = pParse->nTab++; + tab2 = pParse->nTab++; assert( p->pOrderBy==0 ); - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, unionTab, 0); + + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0); assert( p->addrOpenEphm[0] == -1 ); p->addrOpenEphm[0] = addr; findRightmost(p)->selFlags |= SF_UsesEphemeral; assert( p->pEList ); - } - - /* Code the SELECT statements to our left - */ - assert( !pPrior->pOrderBy ); - sqlite3SelectDestInit(&uniondest, priorOp, unionTab); - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &uniondest); - if( rc ){ - goto multi_select_end; - } - - /* Code the current SELECT statement - */ - if( p->op==TK_EXCEPT ){ - op = SRT_Except; - }else{ - assert( p->op==TK_UNION ); - op = SRT_Union; - } - p->pPrior = 0; - pLimit = p->pLimit; - p->pLimit = 0; - pOffset = p->pOffset; - p->pOffset = 0; - uniondest.eDest = op; - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &uniondest); - testcase( rc!=SQLITE_OK ); - /* Query flattening in sqlite3Select() might refill p->pOrderBy. - ** Be sure to delete p->pOrderBy, therefore, to avoid a memory leak. */ - sqlite3ExprListDelete(db, p->pOrderBy); - pDelete = p->pPrior; - p->pPrior = pPrior; - p->pOrderBy = 0; - if( p->op==TK_UNION ){ - p->nSelectRow = sqlite3LogEstAdd(p->nSelectRow, pPrior->nSelectRow); - } - sqlite3ExprDelete(db, p->pLimit); - p->pLimit = pLimit; - p->pOffset = pOffset; - p->iLimit = 0; - p->iOffset = 0; - - /* Convert the data in the temporary table into whatever form - ** it is that we currently need. - */ - assert( unionTab==dest.iSDParm || dest.eDest!=priorOp ); - if( dest.eDest!=priorOp ){ - int iCont, iBreak, iStart; - assert( p->pEList ); - if( dest.eDest==SRT_Output ){ - Select *pFirst = p; - while( pFirst->pPrior ) pFirst = pFirst->pPrior; - generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList); + + /* Code the SELECTs to our left into temporary table "tab1". + */ + sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1); + rc = sqlite3Select(pParse, pPrior, &intersectdest); + if( rc ){ + goto multi_select_end; } + + /* Code the current SELECT into temporary table "tab2" + */ + addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0); + assert( p->addrOpenEphm[1] == -1 ); + p->addrOpenEphm[1] = addr; + p->pPrior = 0; + pLimit = p->pLimit; + p->pLimit = 0; + intersectdest.iSDParm = tab2; + ExplainQueryPlan((pParse, 1, "%s USING TEMP B-TREE", + selectOpName(p->op))); + rc = sqlite3Select(pParse, p, &intersectdest); + testcase( rc!=SQLITE_OK ); + pDelete = p->pPrior; + p->pPrior = pPrior; + if( p->nSelectRow>pPrior->nSelectRow ){ + p->nSelectRow = pPrior->nSelectRow; + } + sqlite3ExprDelete(db, p->pLimit); + p->pLimit = pLimit; + + /* Generate code to take the intersection of the two temporary + ** tables. + */ + assert( p->pEList ); iBreak = sqlite3VdbeMakeLabel(v); iCont = sqlite3VdbeMakeLabel(v); computeLimitRegisters(pParse, p, iBreak); - sqlite3VdbeAddOp2(v, OP_Rewind, unionTab, iBreak); VdbeCoverage(v); - iStart = sqlite3VdbeCurrentAddr(v); - selectInnerLoop(pParse, p, p->pEList, unionTab, + sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v); + r1 = sqlite3GetTempReg(pParse); + iStart = sqlite3VdbeAddOp2(v, OP_RowData, tab1, r1); + sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); + VdbeCoverage(v); + sqlite3ReleaseTempReg(pParse, r1); + selectInnerLoop(pParse, p, tab1, 0, 0, &dest, iCont, iBreak); sqlite3VdbeResolveLabel(v, iCont); - sqlite3VdbeAddOp2(v, OP_Next, unionTab, iStart); VdbeCoverage(v); + sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v); sqlite3VdbeResolveLabel(v, iBreak); - sqlite3VdbeAddOp2(v, OP_Close, unionTab, 0); + sqlite3VdbeAddOp2(v, OP_Close, tab2, 0); + sqlite3VdbeAddOp2(v, OP_Close, tab1, 0); + break; } - break; } - default: assert( p->op==TK_INTERSECT ); { - int tab1, tab2; - int iCont, iBreak, iStart; - Expr *pLimit, *pOffset; - int addr; - SelectDest intersectdest; - int r1; - - /* INTERSECT is different from the others since it requires - ** two temporary tables. Hence it has its own case. Begin - ** by allocating the tables we will need. - */ - tab1 = pParse->nTab++; - tab2 = pParse->nTab++; - assert( p->pOrderBy==0 ); - - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab1, 0); - assert( p->addrOpenEphm[0] == -1 ); - p->addrOpenEphm[0] = addr; - findRightmost(p)->selFlags |= SF_UsesEphemeral; - assert( p->pEList ); - - /* Code the SELECTs to our left into temporary table "tab1". - */ - sqlite3SelectDestInit(&intersectdest, SRT_Union, tab1); - explainSetInteger(iSub1, pParse->iNextSelectId); - rc = sqlite3Select(pParse, pPrior, &intersectdest); - if( rc ){ - goto multi_select_end; - } - - /* Code the current SELECT into temporary table "tab2" - */ - addr = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, tab2, 0); - assert( p->addrOpenEphm[1] == -1 ); - p->addrOpenEphm[1] = addr; - p->pPrior = 0; - pLimit = p->pLimit; - p->pLimit = 0; - pOffset = p->pOffset; - p->pOffset = 0; - intersectdest.iSDParm = tab2; - explainSetInteger(iSub2, pParse->iNextSelectId); - rc = sqlite3Select(pParse, p, &intersectdest); - testcase( rc!=SQLITE_OK ); - pDelete = p->pPrior; - p->pPrior = pPrior; - if( p->nSelectRow>pPrior->nSelectRow ) p->nSelectRow = pPrior->nSelectRow; - sqlite3ExprDelete(db, p->pLimit); - p->pLimit = pLimit; - p->pOffset = pOffset; - - /* Generate code to take the intersection of the two temporary - ** tables. - */ - assert( p->pEList ); - if( dest.eDest==SRT_Output ){ - Select *pFirst = p; - while( pFirst->pPrior ) pFirst = pFirst->pPrior; - generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList); - } - iBreak = sqlite3VdbeMakeLabel(v); - iCont = sqlite3VdbeMakeLabel(v); - computeLimitRegisters(pParse, p, iBreak); - sqlite3VdbeAddOp2(v, OP_Rewind, tab1, iBreak); VdbeCoverage(v); - r1 = sqlite3GetTempReg(pParse); - iStart = sqlite3VdbeAddOp2(v, OP_RowData, tab1, r1); - sqlite3VdbeAddOp4Int(v, OP_NotFound, tab2, iCont, r1, 0); VdbeCoverage(v); - sqlite3ReleaseTempReg(pParse, r1); - selectInnerLoop(pParse, p, p->pEList, tab1, - 0, 0, &dest, iCont, iBreak); - sqlite3VdbeResolveLabel(v, iCont); - sqlite3VdbeAddOp2(v, OP_Next, tab1, iStart); VdbeCoverage(v); - sqlite3VdbeResolveLabel(v, iBreak); - sqlite3VdbeAddOp2(v, OP_Close, tab2, 0); - sqlite3VdbeAddOp2(v, OP_Close, tab1, 0); - break; + + #ifndef SQLITE_OMIT_EXPLAIN + if( p->pNext==0 ){ + ExplainQueryPlanPop(pParse); } + #endif } - - explainComposite(pParse, p->op, iSub1, iSub2, p->op!=TK_ALL); - + /* Compute collating sequences used by ** temporary tables needed to implement the compound select. ** Attach the KeyInfo structure to all temporary tables. @@ -118643,10 +124448,6 @@ static int multiSelectOrderBy( ExprList *pOrderBy; /* The ORDER BY clause */ int nOrderBy; /* Number of terms in the ORDER BY clause */ int *aPermute; /* Mapping from ORDER BY terms to result set columns */ -#ifndef SQLITE_OMIT_EXPLAIN - int iSub1; /* EQP id of left-hand query */ - int iSub2; /* EQP id of right-hand query */ -#endif assert( p->pOrderBy!=0 ); assert( pKeyDup==0 ); /* "Managed" code needs this. Ticket #3382. */ @@ -118682,7 +124483,7 @@ static int multiSelectOrderBy( if( pNew==0 ) return SQLITE_NOMEM_BKPT; pNew->flags |= EP_IntValue; pNew->u.iValue = i; - pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew); + p->pOrderBy = pOrderBy = sqlite3ExprListAppend(pParse, pOrderBy, pNew); if( pOrderBy ) pOrderBy->a[nOrderBy++].u.x.iOrderByCol = (u16)i; } } @@ -118758,8 +124559,6 @@ static int multiSelectOrderBy( } sqlite3ExprDelete(db, p->pLimit); p->pLimit = 0; - sqlite3ExprDelete(db, p->pOffset); - p->pOffset = 0; regAddrA = ++pParse->nMem; regAddrB = ++pParse->nMem; @@ -118768,6 +124567,8 @@ static int multiSelectOrderBy( sqlite3SelectDestInit(&destA, SRT_Coroutine, regAddrA); sqlite3SelectDestInit(&destB, SRT_Coroutine, regAddrB); + ExplainQueryPlan((pParse, 1, "MERGE (%s)", selectOpName(p->op))); + /* Generate a coroutine to evaluate the SELECT statement to the ** left of the compound operator - the "A" select. */ @@ -118775,7 +124576,7 @@ static int multiSelectOrderBy( addr1 = sqlite3VdbeAddOp3(v, OP_InitCoroutine, regAddrA, 0, addrSelectA); VdbeComment((v, "left SELECT")); pPrior->iLimit = regLimitA; - explainSetInteger(iSub1, pParse->iNextSelectId); + ExplainQueryPlan((pParse, 1, "LEFT")); sqlite3Select(pParse, pPrior, &destA); sqlite3VdbeEndCoroutine(v, regAddrA); sqlite3VdbeJumpHere(v, addr1); @@ -118790,7 +124591,7 @@ static int multiSelectOrderBy( savedOffset = p->iOffset; p->iLimit = regLimitB; p->iOffset = 0; - explainSetInteger(iSub2, pParse->iNextSelectId); + ExplainQueryPlan((pParse, 1, "RIGHT")); sqlite3Select(pParse, p, &destB); p->iLimit = savedLimit; p->iOffset = savedOffset; @@ -118892,14 +124693,6 @@ static int multiSelectOrderBy( */ sqlite3VdbeResolveLabel(v, labelEnd); - /* Set the number of output columns - */ - if( pDest->eDest==SRT_Output ){ - Select *pFirst = pPrior; - while( pFirst->pPrior ) pFirst = pFirst->pPrior; - generateColumnNames(pParse, pFirst->pSrc, pFirst->pEList); - } - /* Reassembly the compound query so that it will be freed correctly ** by the calling function */ if( p->pPrior ){ @@ -118910,15 +124703,30 @@ static int multiSelectOrderBy( /*** TBD: Insert subroutine calls to close cursors on incomplete **** subqueries ****/ - explainComposite(pParse, p->op, iSub1, iSub2, 0); + ExplainQueryPlanPop(pParse); return pParse->nErr!=0; } #endif #if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + +/* An instance of the SubstContext object describes an substitution edit +** to be performed on a parse tree. +** +** All references to columns in table iTable are to be replaced by corresponding +** expressions in pEList. +*/ +typedef struct SubstContext { + Parse *pParse; /* The parsing context */ + int iTable; /* Replace references to this table */ + int iNewTable; /* New table number */ + int isLeftJoin; /* Add TK_IF_NULL_ROW opcodes on each replacement */ + ExprList *pEList; /* Replacement expressions */ +} SubstContext; + /* Forward Declarations */ -static void substExprList(Parse*, ExprList*, int, ExprList*); -static void substSelect(Parse*, Select *, int, ExprList*, int); +static void substExprList(SubstContext*, ExprList*); +static void substSelect(SubstContext*, Select*, int); /* ** Scan through the expression pExpr. Replace every reference to @@ -118929,84 +124737,97 @@ static void substSelect(Parse*, Select *, int, ExprList*, int); ** This routine is part of the flattening procedure. A subquery ** whose result set is defined by pEList appears as entry in the ** FROM clause of a SELECT such that the VDBE cursor assigned to that -** FORM clause entry is iTable. This routine make the necessary +** FORM clause entry is iTable. This routine makes the necessary ** changes to pExpr so that it refers directly to the source table ** of the subquery rather the result set of the subquery. */ static Expr *substExpr( - Parse *pParse, /* Report errors here */ - Expr *pExpr, /* Expr in which substitution occurs */ - int iTable, /* Table to be substituted */ - ExprList *pEList /* Substitute expressions */ + SubstContext *pSubst, /* Description of the substitution */ + Expr *pExpr /* Expr in which substitution occurs */ ){ - sqlite3 *db = pParse->db; if( pExpr==0 ) return 0; - if( pExpr->op==TK_COLUMN && pExpr->iTable==iTable ){ + if( ExprHasProperty(pExpr, EP_FromJoin) + && pExpr->iRightJoinTable==pSubst->iTable + ){ + pExpr->iRightJoinTable = pSubst->iNewTable; + } + if( pExpr->op==TK_COLUMN && pExpr->iTable==pSubst->iTable ){ if( pExpr->iColumn<0 ){ pExpr->op = TK_NULL; }else{ Expr *pNew; - Expr *pCopy = pEList->a[pExpr->iColumn].pExpr; - assert( pEList!=0 && pExpr->iColumn<pEList->nExpr ); + Expr *pCopy = pSubst->pEList->a[pExpr->iColumn].pExpr; + Expr ifNullRow; + assert( pSubst->pEList!=0 && pExpr->iColumn<pSubst->pEList->nExpr ); assert( pExpr->pLeft==0 && pExpr->pRight==0 ); if( sqlite3ExprIsVector(pCopy) ){ - sqlite3VectorErrorMsg(pParse, pCopy); + sqlite3VectorErrorMsg(pSubst->pParse, pCopy); }else{ + sqlite3 *db = pSubst->pParse->db; + if( pSubst->isLeftJoin && pCopy->op!=TK_COLUMN ){ + memset(&ifNullRow, 0, sizeof(ifNullRow)); + ifNullRow.op = TK_IF_NULL_ROW; + ifNullRow.pLeft = pCopy; + ifNullRow.iTable = pSubst->iNewTable; + pCopy = &ifNullRow; + } pNew = sqlite3ExprDup(db, pCopy, 0); - if( pNew && (pExpr->flags & EP_FromJoin) ){ + if( pNew && pSubst->isLeftJoin ){ + ExprSetProperty(pNew, EP_CanBeNull); + } + if( pNew && ExprHasProperty(pExpr,EP_FromJoin) ){ pNew->iRightJoinTable = pExpr->iRightJoinTable; - pNew->flags |= EP_FromJoin; + ExprSetProperty(pNew, EP_FromJoin); } sqlite3ExprDelete(db, pExpr); pExpr = pNew; } } }else{ - pExpr->pLeft = substExpr(pParse, pExpr->pLeft, iTable, pEList); - pExpr->pRight = substExpr(pParse, pExpr->pRight, iTable, pEList); + if( pExpr->op==TK_IF_NULL_ROW && pExpr->iTable==pSubst->iTable ){ + pExpr->iTable = pSubst->iNewTable; + } + pExpr->pLeft = substExpr(pSubst, pExpr->pLeft); + pExpr->pRight = substExpr(pSubst, pExpr->pRight); if( ExprHasProperty(pExpr, EP_xIsSelect) ){ - substSelect(pParse, pExpr->x.pSelect, iTable, pEList, 1); + substSelect(pSubst, pExpr->x.pSelect, 1); }else{ - substExprList(pParse, pExpr->x.pList, iTable, pEList); + substExprList(pSubst, pExpr->x.pList); } } return pExpr; } static void substExprList( - Parse *pParse, /* Report errors here */ - ExprList *pList, /* List to scan and in which to make substitutes */ - int iTable, /* Table to be substituted */ - ExprList *pEList /* Substitute values */ + SubstContext *pSubst, /* Description of the substitution */ + ExprList *pList /* List to scan and in which to make substitutes */ ){ int i; if( pList==0 ) return; for(i=0; i<pList->nExpr; i++){ - pList->a[i].pExpr = substExpr(pParse, pList->a[i].pExpr, iTable, pEList); + pList->a[i].pExpr = substExpr(pSubst, pList->a[i].pExpr); } } static void substSelect( - Parse *pParse, /* Report errors here */ - Select *p, /* SELECT statement in which to make substitutions */ - int iTable, /* Table to be replaced */ - ExprList *pEList, /* Substitute values */ - int doPrior /* Do substitutes on p->pPrior too */ + SubstContext *pSubst, /* Description of the substitution */ + Select *p, /* SELECT statement in which to make substitutions */ + int doPrior /* Do substitutes on p->pPrior too */ ){ SrcList *pSrc; struct SrcList_item *pItem; int i; if( !p ) return; do{ - substExprList(pParse, p->pEList, iTable, pEList); - substExprList(pParse, p->pGroupBy, iTable, pEList); - substExprList(pParse, p->pOrderBy, iTable, pEList); - p->pHaving = substExpr(pParse, p->pHaving, iTable, pEList); - p->pWhere = substExpr(pParse, p->pWhere, iTable, pEList); + substExprList(pSubst, p->pEList); + substExprList(pSubst, p->pGroupBy); + substExprList(pSubst, p->pOrderBy); + p->pHaving = substExpr(pSubst, p->pHaving); + p->pWhere = substExpr(pSubst, p->pWhere); pSrc = p->pSrc; assert( pSrc!=0 ); for(i=pSrc->nSrc, pItem=pSrc->a; i>0; i--, pItem++){ - substSelect(pParse, pItem->pSelect, iTable, pEList, 1); + substSelect(pSubst, pItem->pSelect, 1); if( pItem->fg.isTabFunc ){ - substExprList(pParse, pItem->u1.pFuncArg, iTable, pEList); + substExprList(pSubst, pItem->u1.pFuncArg); } } }while( doPrior && (p = p->pPrior)!=0 ); @@ -119040,66 +124861,74 @@ static void substSelect( ** exist on the table t1, a complete scan of the data might be ** avoided. ** -** Flattening is only attempted if all of the following are true: +** Flattening is subject to the following constraints: ** -** (1) The subquery and the outer query do not both use aggregates. +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** The subquery and the outer query cannot both be aggregates. ** -** (2) The subquery is not an aggregate or (2a) the outer query is not a join -** and (2b) the outer query does not use subqueries other than the one -** FROM-clause subquery that is a candidate for flattening. (2b is -** due to ticket [2f7170d73bf9abf80] from 2015-02-09.) +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** (2) If the subquery is an aggregate then +** (2a) the outer query must not be a join and +** (2b) the outer query must not use subqueries +** other than the one FROM-clause subquery that is a candidate +** for flattening. (This is due to ticket [2f7170d73bf9abf80] +** from 2015-02-09.) ** -** (3) The subquery is not the right operand of a left outer join -** (Originally ticket #306. Strengthened by ticket #3300) +** (3) If the subquery is the right operand of a LEFT JOIN then +** (3a) the subquery may not be a join and +** (3b) the FROM clause of the subquery may not contain a virtual +** table and +** (3c) the outer query may not be an aggregate. ** -** (4) The subquery is not DISTINCT. +** (4) The subquery can not be DISTINCT. ** ** (**) At one point restrictions (4) and (5) defined a subset of DISTINCT ** sub-queries that were excluded from this optimization. Restriction ** (4) has since been expanded to exclude all DISTINCT subqueries. ** -** (6) The subquery does not use aggregates or the outer query is not -** DISTINCT. +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** If the subquery is aggregate, the outer query may not be DISTINCT. ** -** (7) The subquery has a FROM clause. TODO: For subqueries without -** A FROM clause, consider adding a FROM close with the special +** (7) The subquery must have a FROM clause. TODO: For subqueries without +** A FROM clause, consider adding a FROM clause with the special ** table sqlite_once that consists of a single row containing a ** single NULL. ** -** (8) The subquery does not use LIMIT or the outer query is not a join. +** (8) If the subquery uses LIMIT then the outer query may not be a join. ** -** (9) The subquery does not use LIMIT or the outer query does not use -** aggregates. +** (9) If the subquery uses LIMIT then the outer query may not be aggregate. ** ** (**) Restriction (10) was removed from the code on 2005-02-05 but we ** accidently carried the comment forward until 2014-09-15. Original -** text: "The subquery does not use aggregates or the outer query -** does not use LIMIT." +** constraint: "If the subquery is aggregate then the outer query +** may not use LIMIT." ** -** (11) The subquery and the outer query do not both have ORDER BY clauses. +** (11) The subquery and the outer query may not both have ORDER BY clauses. ** ** (**) Not implemented. Subsumed into restriction (3). Was previously ** a separate restriction deriving from ticket #350. ** -** (13) The subquery and outer query do not both use LIMIT. +** (13) The subquery and outer query may not both use LIMIT. ** -** (14) The subquery does not use OFFSET. +** (14) The subquery may not use OFFSET. ** -** (15) The outer query is not part of a compound select or the -** subquery does not have a LIMIT clause. +** (15) If the outer query is part of a compound select, then the +** subquery may not use LIMIT. ** (See ticket #2339 and ticket [02a8e81d44]). ** -** (16) The outer query is not an aggregate or the subquery does -** not contain ORDER BY. (Ticket #2942) This used to not matter +** (16) If the outer query is aggregate, then the subquery may not +** use ORDER BY. (Ticket #2942) This used to not matter ** until we introduced the group_concat() function. ** -** (17) The sub-query is not a compound select, or it is a UNION ALL -** compound clause made up entirely of non-aggregate queries, and -** the parent query: -** -** * is not itself part of a compound select, -** * is not an aggregate or DISTINCT query, and -** * is not a join +** (17) If the subquery is a compound select, then +** (17a) all compound operators must be a UNION ALL, and +** (17b) no terms within the subquery compound may be aggregate +** or DISTINCT, and +** (17c) every term within the subquery compound must have a FROM clause +** (17d) the outer query may not be +** (17d1) aggregate, or +** (17d2) DISTINCT, or +** (17d3) a join. ** ** The parent and sub-query may contain WHERE clauses. Subject to ** rules (11), (13) and (14), they may also contain ORDER BY, @@ -119115,10 +124944,10 @@ static void substSelect( ** syntax error and return a detailed message. ** ** (18) If the sub-query is a compound select, then all terms of the -** ORDER by clause of the parent must be simple references to +** ORDER BY clause of the parent must be simple references to ** columns of the sub-query. ** -** (19) The subquery does not use LIMIT or the outer query does not +** (19) If the subquery uses LIMIT then the outer query may not ** have a WHERE clause. ** ** (20) If the sub-query is a compound select, then it must not use @@ -119127,17 +124956,19 @@ static void substSelect( ** appear as unmodified result columns in the outer query. But we ** have other optimizations in mind to deal with that case. ** -** (21) The subquery does not use LIMIT or the outer query is not +** (21) If the subquery uses LIMIT then the outer query may not be ** DISTINCT. (See ticket [752e1646fc]). ** -** (22) The subquery is not a recursive CTE. +** (22) The subquery may not be a recursive CTE. ** -** (23) The parent is not a recursive CTE, or the sub-query is not a -** compound query. This restriction is because transforming the +** (**) Subsumed into restriction (17d3). Was: If the outer query is +** a recursive CTE, then the sub-query may not be a compound query. +** This restriction is because transforming the ** parent to a compound query confuses the code that handles ** recursive queries in multiSelect(). ** -** (24) The subquery is not an aggregate that uses the built-in min() or +** (**) We no longer attempt to flatten aggregate subqueries. Was: +** The subquery may not be an aggregate that uses the built-in min() or ** or max() functions. (Without this restriction, a query like: ** "SELECT x FROM (SELECT max(y), x FROM t1)" would not necessarily ** return the value X for which Y was maximal.) @@ -119145,7 +124976,7 @@ static void substSelect( ** ** In this routine, the "p" parameter is a pointer to the outer query. ** The subquery is p->pSrc->a[iFrom]. isAgg is true if the outer query -** uses aggregates and subqueryIsAgg is true if the subquery uses aggregates. +** uses aggregates. ** ** If flattening is not attempted, this routine is a no-op and returns 0. ** If flattening is attempted this routine returns 1. @@ -119157,8 +124988,7 @@ static int flattenSubquery( Parse *pParse, /* Parsing context */ Select *p, /* The parent or outer SELECT statement */ int iFrom, /* Index in p->pSrc->a[] of the inner subquery */ - int isAgg, /* True if outer SELECT uses aggregate functions */ - int subqueryIsAgg /* True if the subquery uses aggregate functions */ + int isAgg /* True if outer SELECT uses aggregate functions */ ){ const char *zSavedAuthContext = pParse->zAuthContext; Select *pParent; /* Current UNION ALL term of the other query */ @@ -119166,8 +124996,9 @@ static int flattenSubquery( Select *pSub1; /* Pointer to the rightmost select in sub-query */ SrcList *pSrc; /* The FROM clause of the outer query */ SrcList *pSubSrc; /* The FROM clause of the subquery */ - ExprList *pList; /* The result set of the outer query */ int iParent; /* VDBE cursor number of the pSub result set temp table */ + int iNewParent = -1;/* Replacement table for iParent */ + int isLeftJoin = 0; /* True if pSub is the right side of a LEFT JOIN */ int i; /* Loop counter */ Expr *pWhere; /* The WHERE clause */ struct SrcList_item *pSubitem; /* The subquery */ @@ -119176,7 +125007,7 @@ static int flattenSubquery( /* Check to see if flattening is permitted. Return 0 if not. */ assert( p!=0 ); - assert( p->pPrior==0 ); /* Unable to flatten compound queries */ + assert( p->pPrior==0 ); if( OptimizationDisabled(db, SQLITE_QueryFlattener) ) return 0; pSrc = p->pSrc; assert( pSrc && iFrom>=0 && iFrom<pSrc->nSrc ); @@ -119184,17 +125015,7 @@ static int flattenSubquery( iParent = pSubitem->iCursor; pSub = pSubitem->pSelect; assert( pSub!=0 ); - if( subqueryIsAgg ){ - if( isAgg ) return 0; /* Restriction (1) */ - if( pSrc->nSrc>1 ) return 0; /* Restriction (2a) */ - if( (p->pWhere && ExprHasProperty(p->pWhere,EP_Subquery)) - || (sqlite3ExprListFlags(p->pEList) & EP_Subquery)!=0 - || (sqlite3ExprListFlags(p->pOrderBy) & EP_Subquery)!=0 - ){ - return 0; /* Restriction (2b) */ - } - } - + pSubSrc = pSub->pSrc; assert( pSubSrc ); /* Prior to version 3.1.2, when LIMIT and OFFSET had to be simple constants, @@ -119203,18 +125024,15 @@ static int flattenSubquery( ** became arbitrary expressions, we were forced to add restrictions (13) ** and (14). */ if( pSub->pLimit && p->pLimit ) return 0; /* Restriction (13) */ - if( pSub->pOffset ) return 0; /* Restriction (14) */ + if( pSub->pLimit && pSub->pLimit->pRight ) return 0; /* Restriction (14) */ if( (p->selFlags & SF_Compound)!=0 && pSub->pLimit ){ return 0; /* Restriction (15) */ } if( pSubSrc->nSrc==0 ) return 0; /* Restriction (7) */ - if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (5) */ + if( pSub->selFlags & SF_Distinct ) return 0; /* Restriction (4) */ if( pSub->pLimit && (pSrc->nSrc>1 || isAgg) ){ return 0; /* Restrictions (8)(9) */ } - if( (p->selFlags & SF_Distinct)!=0 && subqueryIsAgg ){ - return 0; /* Restriction (6) */ - } if( p->pOrderBy && pSub->pOrderBy ){ return 0; /* Restriction (11) */ } @@ -119223,19 +125041,14 @@ static int flattenSubquery( if( pSub->pLimit && (p->selFlags & SF_Distinct)!=0 ){ return 0; /* Restriction (21) */ } - testcase( pSub->selFlags & SF_Recursive ); - testcase( pSub->selFlags & SF_MinMaxAgg ); - if( pSub->selFlags & (SF_Recursive|SF_MinMaxAgg) ){ - return 0; /* Restrictions (22) and (24) */ - } - if( (p->selFlags & SF_Recursive) && pSub->pPrior ){ - return 0; /* Restriction (23) */ + if( pSub->selFlags & (SF_Recursive) ){ + return 0; /* Restrictions (22) */ } - /* OBSOLETE COMMENT 1: - ** Restriction 3: If the subquery is a join, make sure the subquery is - ** not used as the right operand of an outer join. Examples of why this - ** is not allowed: + /* + ** If the subquery is the right operand of a LEFT JOIN, then the + ** subquery may not be a join itself (3a). Example of why this is not + ** allowed: ** ** t1 LEFT OUTER JOIN (t2 JOIN t3) ** @@ -119245,56 +125058,57 @@ static int flattenSubquery( ** ** which is not at all the same thing. ** - ** OBSOLETE COMMENT 2: - ** Restriction 12: If the subquery is the right operand of a left outer - ** join, make sure the subquery has no WHERE clause. - ** An examples of why this is not allowed: + ** If the subquery is the right operand of a LEFT JOIN, then the outer + ** query cannot be an aggregate. (3c) This is an artifact of the way + ** aggregates are processed - there is no mechanism to determine if + ** the LEFT JOIN table should be all-NULL. ** - ** t1 LEFT OUTER JOIN (SELECT * FROM t2 WHERE t2.x>0) - ** - ** If we flatten the above, we would get - ** - ** (t1 LEFT OUTER JOIN t2) WHERE t2.x>0 - ** - ** But the t2.x>0 test will always fail on a NULL row of t2, which - ** effectively converts the OUTER JOIN into an INNER JOIN. - ** - ** THIS OVERRIDES OBSOLETE COMMENTS 1 AND 2 ABOVE: - ** Ticket #3300 shows that flattening the right term of a LEFT JOIN - ** is fraught with danger. Best to avoid the whole thing. If the - ** subquery is the right term of a LEFT JOIN, then do not flatten. + ** See also tickets #306, #350, and #3300. */ if( (pSubitem->fg.jointype & JT_OUTER)!=0 ){ - return 0; + isLeftJoin = 1; + if( pSubSrc->nSrc>1 || isAgg || IsVirtual(pSubSrc->a[0].pTab) ){ + /* (3a) (3c) (3b) */ + return 0; + } } +#ifdef SQLITE_EXTRA_IFNULLROW + else if( iFrom>0 && !isAgg ){ + /* Setting isLeftJoin to -1 causes OP_IfNullRow opcodes to be generated for + ** every reference to any result column from subquery in a join, even + ** though they are not necessary. This will stress-test the OP_IfNullRow + ** opcode. */ + isLeftJoin = -1; + } +#endif - /* Restriction 17: If the sub-query is a compound SELECT, then it must + /* Restriction (17): If the sub-query is a compound SELECT, then it must ** use only the UNION ALL operator. And none of the simple select queries ** that make up the compound SELECT are allowed to be aggregate or distinct ** queries. */ if( pSub->pPrior ){ if( pSub->pOrderBy ){ - return 0; /* Restriction 20 */ + return 0; /* Restriction (20) */ } if( isAgg || (p->selFlags & SF_Distinct)!=0 || pSrc->nSrc!=1 ){ - return 0; + return 0; /* (17d1), (17d2), or (17d3) */ } for(pSub1=pSub; pSub1; pSub1=pSub1->pPrior){ testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Distinct ); testcase( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))==SF_Aggregate ); assert( pSub->pSrc!=0 ); assert( pSub->pEList->nExpr==pSub1->pEList->nExpr ); - if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 - || (pSub1->pPrior && pSub1->op!=TK_ALL) - || pSub1->pSrc->nSrc<1 + if( (pSub1->selFlags & (SF_Distinct|SF_Aggregate))!=0 /* (17b) */ + || (pSub1->pPrior && pSub1->op!=TK_ALL) /* (17a) */ + || pSub1->pSrc->nSrc<1 /* (17c) */ ){ return 0; } testcase( pSub1->pSrc->nSrc>1 ); } - /* Restriction 18. */ + /* Restriction (18). */ if( p->pOrderBy ){ int ii; for(ii=0; ii<p->pOrderBy->nExpr; ii++){ @@ -119303,6 +125117,14 @@ static int flattenSubquery( } } + /* Ex-restriction (23): + ** The only way that the recursive part of a CTE can contain a compound + ** subquery is for the subquery to be one term of a join. But if the + ** subquery is a join, then the flattening has already been stopped by + ** restriction (17d3) + */ + assert( (p->selFlags & SF_Recursive)==0 || pSub->pPrior==0 ); + /***** If we reach this point, flattening is permitted. *****/ SELECTTRACE(1,pParse,p,("flatten %s.%p from term %d\n", pSub->zSelName, pSub, iFrom)); @@ -119350,16 +125172,13 @@ static int flattenSubquery( Select *pNew; ExprList *pOrderBy = p->pOrderBy; Expr *pLimit = p->pLimit; - Expr *pOffset = p->pOffset; Select *pPrior = p->pPrior; p->pOrderBy = 0; p->pSrc = 0; p->pPrior = 0; p->pLimit = 0; - p->pOffset = 0; pNew = sqlite3SelectDup(db, p, 0); sqlite3SelectSetName(pNew, pSub->zSelName); - p->pOffset = pOffset; p->pLimit = pLimit; p->pOrderBy = pOrderBy; p->pSrc = pSrc; @@ -119371,9 +125190,8 @@ static int flattenSubquery( if( pPrior ) pPrior->pNext = pNew; pNew->pNext = p; p->pPrior = pNew; - SELECTTRACE(2,pParse,p, - ("compound-subquery flattener creates %s.%p as peer\n", - pNew->zSelName, pNew)); + SELECTTRACE(2,pParse,p,("compound-subquery flattener" + " creates %s.%p as peer\n",pNew->zSelName, pNew)); } if( db->mallocFailed ) return 1; } @@ -119474,6 +125292,7 @@ static int flattenSubquery( sqlite3IdListDelete(db, pSrc->a[i+iFrom].pUsing); assert( pSrc->a[i+iFrom].fg.isTabFunc==0 ); pSrc->a[i+iFrom] = pSubSrc->a[i]; + iNewParent = pSubSrc->a[i].iCursor; memset(&pSubSrc->a[i], 0, sizeof(pSubSrc->a[i])); } pSrc->a[iFrom].fg.jointype = jointype; @@ -119490,14 +125309,6 @@ static int flattenSubquery( ** We look at every expression in the outer query and every place we see ** "a" we substitute "x*3" and every place we see "b" we substitute "y+10". */ - pList = pParent->pEList; - for(i=0; i<pList->nExpr; i++){ - if( pList->a[i].zName==0 ){ - char *zName = sqlite3DbStrDup(db, pList->a[i].zSpan); - sqlite3Dequote(zName); - pList->a[i].zName = zName; - } - } if( pSub->pOrderBy ){ /* At this point, any non-zero iOrderByCol values indicate that the ** ORDER BY column expression is identical to the iOrderByCol'th @@ -119514,24 +125325,23 @@ static int flattenSubquery( pOrderBy->a[i].u.x.iOrderByCol = 0; } assert( pParent->pOrderBy==0 ); - assert( pSub->pPrior==0 ); pParent->pOrderBy = pOrderBy; pSub->pOrderBy = 0; } pWhere = sqlite3ExprDup(db, pSub->pWhere, 0); - if( subqueryIsAgg ){ - assert( pParent->pHaving==0 ); - pParent->pHaving = pParent->pWhere; - pParent->pWhere = pWhere; - pParent->pHaving = sqlite3ExprAnd(db, - sqlite3ExprDup(db, pSub->pHaving, 0), pParent->pHaving - ); - assert( pParent->pGroupBy==0 ); - pParent->pGroupBy = sqlite3ExprListDup(db, pSub->pGroupBy, 0); - }else{ - pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere); + if( isLeftJoin>0 ){ + setJoinExpr(pWhere, iNewParent); + } + pParent->pWhere = sqlite3ExprAnd(db, pWhere, pParent->pWhere); + if( db->mallocFailed==0 ){ + SubstContext x; + x.pParse = pParse; + x.iTable = iParent; + x.iNewTable = iNewParent; + x.isLeftJoin = isLeftJoin; + x.pEList = pSub->pEList; + substSelect(&x, pParent, 0); } - substSelect(pParse, pParent, iParent, pSub->pEList, 0); /* The flattened query is distinct if either the inner or the ** outer query is distinct. @@ -119585,21 +125395,35 @@ static int flattenSubquery( ** ** Do not attempt this optimization if: ** -** (1) The inner query is an aggregate. (In that case, we'd really want -** to copy the outer WHERE-clause terms onto the HAVING clause of the -** inner query. But they probably won't help there so do not bother.) +** (1) (** This restriction was removed on 2017-09-29. We used to +** disallow this optimization for aggregate subqueries, but now +** it is allowed by putting the extra terms on the HAVING clause. +** The added HAVING clause is pointless if the subquery lacks +** a GROUP BY clause. But such a HAVING clause is also harmless +** so there does not appear to be any reason to add extra logic +** to suppress it. **) ** ** (2) The inner query is the recursive part of a common table expression. ** ** (3) The inner query has a LIMIT clause (since the changes to the WHERE ** close would change the meaning of the LIMIT). ** -** (4) The inner query is the right operand of a LEFT JOIN. (The caller -** enforces this restriction since this routine does not have enough -** information to know.) +** (4) The inner query is the right operand of a LEFT JOIN and the +** expression to be pushed down does not come from the ON clause +** on that LEFT JOIN. ** ** (5) The WHERE clause expression originates in the ON or USING clause -** of a LEFT JOIN. +** of a LEFT JOIN where iCursor is not the right-hand table of that +** left join. An example: +** +** SELECT * +** FROM (SELECT 1 AS a1 UNION ALL SELECT 2) AS aa +** JOIN (SELECT 1 AS b2 UNION ALL SELECT 2) AS bb ON (a1=b2) +** LEFT JOIN (SELECT 8 AS c3 UNION ALL SELECT 9) AS cc ON (b2=2); +** +** The correct answer is three rows: (1,1,NULL),(2,2,8),(2,2,9). +** But if the (b2=2) term were to be pushed down into the bb subquery, +** then the (1,1,NULL) row would be suppressed. ** ** Return 0 if no changes are made and non-zero if one or more WHERE clause ** terms are duplicated into the subquery. @@ -119608,34 +125432,61 @@ static int pushDownWhereTerms( Parse *pParse, /* Parse context (for malloc() and error reporting) */ Select *pSubq, /* The subquery whose WHERE clause is to be augmented */ Expr *pWhere, /* The WHERE clause of the outer query */ - int iCursor /* Cursor number of the subquery */ + int iCursor, /* Cursor number of the subquery */ + int isLeftJoin /* True if pSubq is the right term of a LEFT JOIN */ ){ Expr *pNew; int nChng = 0; - Select *pX; /* For looping over compound SELECTs in pSubq */ if( pWhere==0 ) return 0; - for(pX=pSubq; pX; pX=pX->pPrior){ - if( (pX->selFlags & (SF_Aggregate|SF_Recursive))!=0 ){ - testcase( pX->selFlags & SF_Aggregate ); - testcase( pX->selFlags & SF_Recursive ); - testcase( pX!=pSubq ); - return 0; /* restrictions (1) and (2) */ + if( pSubq->selFlags & SF_Recursive ) return 0; /* restriction (2) */ + +#ifdef SQLITE_DEBUG + /* Only the first term of a compound can have a WITH clause. But make + ** sure no other terms are marked SF_Recursive in case something changes + ** in the future. + */ + { + Select *pX; + for(pX=pSubq; pX; pX=pX->pPrior){ + assert( (pX->selFlags & (SF_Recursive))==0 ); } } +#endif + if( pSubq->pLimit!=0 ){ return 0; /* restriction (3) */ } while( pWhere->op==TK_AND ){ - nChng += pushDownWhereTerms(pParse, pSubq, pWhere->pRight, iCursor); + nChng += pushDownWhereTerms(pParse, pSubq, pWhere->pRight, + iCursor, isLeftJoin); pWhere = pWhere->pLeft; } - if( ExprHasProperty(pWhere,EP_FromJoin) ) return 0; /* restriction 5 */ + if( isLeftJoin + && (ExprHasProperty(pWhere,EP_FromJoin)==0 + || pWhere->iRightJoinTable!=iCursor) + ){ + return 0; /* restriction (4) */ + } + if( ExprHasProperty(pWhere,EP_FromJoin) && pWhere->iRightJoinTable!=iCursor ){ + return 0; /* restriction (5) */ + } if( sqlite3ExprIsTableConstant(pWhere, iCursor) ){ nChng++; while( pSubq ){ + SubstContext x; pNew = sqlite3ExprDup(pParse->db, pWhere, 0); - pNew = substExpr(pParse, pNew, iCursor, pSubq->pEList); - pSubq->pWhere = sqlite3ExprAnd(pParse->db, pSubq->pWhere, pNew); + unsetJoinExpr(pNew, -1); + x.pParse = pParse; + x.iTable = iCursor; + x.iNewTable = iCursor; + x.isLeftJoin = 0; + x.pEList = pSubq->pEList; + pNew = substExpr(&x, pNew); + if( pSubq->selFlags & SF_Aggregate ){ + pSubq->pHaving = sqlite3ExprAnd(pParse->db, pSubq->pHaving, pNew); + }else{ + pSubq->pWhere = sqlite3ExprAnd(pParse->db, pSubq->pWhere, pNew); + } pSubq = pSubq->pPrior; } } @@ -119644,42 +125495,44 @@ static int pushDownWhereTerms( #endif /* !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) */ /* -** Based on the contents of the AggInfo structure indicated by the first -** argument, this function checks if the following are true: +** The pFunc is the only aggregate function in the query. Check to see +** if the query is a candidate for the min/max optimization. ** -** * the query contains just a single aggregate function, -** * the aggregate function is either min() or max(), and -** * the argument to the aggregate function is a column value. +** If the query is a candidate for the min/max optimization, then set +** *ppMinMax to be an ORDER BY clause to be used for the optimization +** and return either WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX depending on +** whether pFunc is a min() or max() function. ** -** If all of the above are true, then WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX -** is returned as appropriate. Also, *ppMinMax is set to point to the -** list of arguments passed to the aggregate before returning. +** If the query is not a candidate for the min/max optimization, return +** WHERE_ORDERBY_NORMAL (which must be zero). ** -** Or, if the conditions above are not met, *ppMinMax is set to 0 and -** WHERE_ORDERBY_NORMAL is returned. +** This routine must be called after aggregate functions have been +** located but before their arguments have been subjected to aggregate +** analysis. */ -static u8 minMaxQuery(AggInfo *pAggInfo, ExprList **ppMinMax){ - int eRet = WHERE_ORDERBY_NORMAL; /* Return value */ - - *ppMinMax = 0; - if( pAggInfo->nFunc==1 ){ - Expr *pExpr = pAggInfo->aFunc[0].pExpr; /* Aggregate function */ - ExprList *pEList = pExpr->x.pList; /* Arguments to agg function */ - - assert( pExpr->op==TK_AGG_FUNCTION ); - if( pEList && pEList->nExpr==1 && pEList->a[0].pExpr->op==TK_AGG_COLUMN ){ - const char *zFunc = pExpr->u.zToken; - if( sqlite3StrICmp(zFunc, "min")==0 ){ - eRet = WHERE_ORDERBY_MIN; - *ppMinMax = pEList; - }else if( sqlite3StrICmp(zFunc, "max")==0 ){ - eRet = WHERE_ORDERBY_MAX; - *ppMinMax = pEList; - } - } - } - - assert( *ppMinMax==0 || (*ppMinMax)->nExpr==1 ); +static u8 minMaxQuery(sqlite3 *db, Expr *pFunc, ExprList **ppMinMax){ + int eRet = WHERE_ORDERBY_NORMAL; /* Return value */ + ExprList *pEList = pFunc->x.pList; /* Arguments to agg function */ + const char *zFunc; /* Name of aggregate function pFunc */ + ExprList *pOrderBy; + u8 sortOrder; + + assert( *ppMinMax==0 ); + assert( pFunc->op==TK_AGG_FUNCTION ); + if( pEList==0 || pEList->nExpr!=1 ) return eRet; + zFunc = pFunc->u.zToken; + if( sqlite3StrICmp(zFunc, "min")==0 ){ + eRet = WHERE_ORDERBY_MIN; + sortOrder = SQLITE_SO_ASC; + }else if( sqlite3StrICmp(zFunc, "max")==0 ){ + eRet = WHERE_ORDERBY_MAX; + sortOrder = SQLITE_SO_DESC; + }else{ + return eRet; + } + *ppMinMax = pOrderBy = sqlite3ExprListDup(db, pEList, 0); + assert( pOrderBy!=0 || db->mallocFailed ); + if( pOrderBy ) pOrderBy->a[0].sortOrder = sortOrder; return eRet; } @@ -119810,7 +125663,6 @@ static int convertCompoundSelectToSubquery(Walker *pWalker, Select *p){ assert( pNew->pPrior!=0 ); pNew->pPrior->pNext = pNew; pNew->pLimit = 0; - pNew->pOffset = 0; return WRC_Continue; } @@ -119963,7 +125815,8 @@ static int withExpand( ); return SQLITE_ERROR; } - assert( pTab->nTabRef==1 || ((pSel->selFlags&SF_Recursive) && pTab->nTabRef==2 )); + assert( pTab->nTabRef==1 || + ((pSel->selFlags&SF_Recursive) && pTab->nTabRef==2 )); pCte->zCteErr = "circular reference: %s"; pSavedWith = pParse->pWith; @@ -120020,7 +125873,7 @@ static int withExpand( */ static void selectPopWith(Walker *pWalker, Select *p){ Parse *pParse = pWalker->pParse; - if( pParse->pWith && p->pPrior==0 ){ + if( OK_IF_ALWAYS_TRUE(pParse->pWith) && p->pPrior==0 ){ With *pWith = findRightmost(p)->pWith; if( pWith!=0 ){ assert( pParse->pWith==pWith ); @@ -120065,19 +125918,19 @@ static int selectExpander(Walker *pWalker, Select *p){ sqlite3 *db = pParse->db; Expr *pE, *pRight, *pExpr; u16 selFlags = p->selFlags; + u32 elistFlags = 0; p->selFlags |= SF_Expanded; if( db->mallocFailed ){ return WRC_Abort; } - if( NEVER(p->pSrc==0) || (selFlags & SF_Expanded)!=0 ){ + assert( p->pSrc!=0 ); + if( (selFlags & SF_Expanded)!=0 ){ return WRC_Prune; } pTabList = p->pSrc; pEList = p->pEList; - if( p->pWith ){ - sqlite3WithPush(pParse, p->pWith, 0); - } + sqlite3WithPush(pParse, p->pWith, 0); /* Make sure cursor numbers have been assigned to all entries in ** the FROM clause of the SELECT statement. @@ -120107,7 +125960,11 @@ static int selectExpander(Walker *pWalker, Select *p){ pFrom->pTab = pTab = sqlite3DbMallocZero(db, sizeof(Table)); if( pTab==0 ) return WRC_Abort; pTab->nTabRef = 1; - pTab->zName = sqlite3MPrintf(db, "sqlite_sq_%p", (void*)pTab); + if( pFrom->zAlias ){ + pTab->zName = sqlite3DbStrDup(db, pFrom->zAlias); + }else{ + pTab->zName = sqlite3MPrintf(db, "subquery_%p", (void*)pTab); + } while( pSel->pPrior ){ pSel = pSel->pPrior; } sqlite3ColumnsFromExprList(pParse, pSel->pEList,&pTab->nCol,&pTab->aCol); pTab->iPKey = -1; @@ -120173,6 +126030,7 @@ static int selectExpander(Walker *pWalker, Select *p){ assert( pE->op!=TK_DOT || pE->pRight!=0 ); assert( pE->op!=TK_DOT || (pE->pLeft!=0 && pE->pLeft->op==TK_ID) ); if( pE->op==TK_DOT && pE->pRight->op==TK_ASTERISK ) break; + elistFlags |= pE->flags; } if( k<pEList->nExpr ){ /* @@ -120188,6 +126046,7 @@ static int selectExpander(Walker *pWalker, Select *p){ for(k=0; k<pEList->nExpr; k++){ pE = a[k].pExpr; + elistFlags |= pE->flags; pRight = pE->pRight; assert( pE->op!=TK_DOT || pRight!=0 ); if( pE->op!=TK_ASTERISK @@ -120317,12 +126176,15 @@ static int selectExpander(Walker *pWalker, Select *p){ sqlite3ExprListDelete(db, pEList); p->pEList = pNew; } -#if SQLITE_MAX_COLUMN - if( p->pEList && p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ - sqlite3ErrorMsg(pParse, "too many columns in result set"); - return WRC_Abort; + if( p->pEList ){ + if( p->pEList->nExpr>db->aLimit[SQLITE_LIMIT_COLUMN] ){ + sqlite3ErrorMsg(pParse, "too many columns in result set"); + return WRC_Abort; + } + if( (elistFlags & (EP_HasFunc|EP_Subquery))!=0 ){ + p->selFlags |= SF_ComplexResult; + } } -#endif return WRC_Continue; } @@ -120341,6 +126203,25 @@ SQLITE_PRIVATE int sqlite3ExprWalkNoop(Walker *NotUsed, Expr *NotUsed2){ } /* +** No-op routine for the parse-tree walker for SELECT statements. +** subquery in the parser tree. +*/ +SQLITE_PRIVATE int sqlite3SelectWalkNoop(Walker *NotUsed, Select *NotUsed2){ + UNUSED_PARAMETER2(NotUsed, NotUsed2); + return WRC_Continue; +} + +#if SQLITE_DEBUG +/* +** Always assert. This xSelectCallback2 implementation proves that the +** xSelectCallback2 is never invoked. +*/ +SQLITE_PRIVATE void sqlite3SelectWalkAssert2(Walker *NotUsed, Select *NotUsed2){ + UNUSED_PARAMETER2(NotUsed, NotUsed2); + assert( 0 ); +} +#endif +/* ** This routine "expands" a SELECT statement and all of its subqueries. ** For additional information on what it means to "expand" a SELECT ** statement, see the comment on the selectExpand worker callback above. @@ -120355,11 +126236,11 @@ SQLITE_PRIVATE int sqlite3ExprWalkNoop(Walker *NotUsed, Expr *NotUsed2){ */ static void sqlite3SelectExpand(Parse *pParse, Select *pSelect){ Walker w; - memset(&w, 0, sizeof(w)); w.xExprCallback = sqlite3ExprWalkNoop; w.pParse = pParse; - if( pParse->hasCompound ){ + if( OK_IF_ALWAYS_TRUE(pParse->hasCompound) ){ w.xSelectCallback = convertCompoundSelectToSubquery; + w.xSelectCallback2 = 0; sqlite3WalkSelect(&w, pSelect); } w.xSelectCallback = selectExpander; @@ -120419,7 +126300,7 @@ static void selectAddSubqueryTypeInfo(Walker *pWalker, Select *p){ static void sqlite3SelectAddTypeInfo(Parse *pParse, Select *pSelect){ #ifndef SQLITE_OMIT_SUBQUERY Walker w; - memset(&w, 0, sizeof(w)); + w.xSelectCallback = sqlite3SelectWalkNoop; w.xSelectCallback2 = selectAddSubqueryTypeInfo; w.xExprCallback = sqlite3ExprWalkNoop; w.pParse = pParse; @@ -120445,15 +126326,13 @@ SQLITE_PRIVATE void sqlite3SelectPrep( Select *p, /* The SELECT statement being coded. */ NameContext *pOuterNC /* Name context for container */ ){ - sqlite3 *db; - if( NEVER(p==0) ) return; - db = pParse->db; - if( db->mallocFailed ) return; + assert( p!=0 || pParse->db->mallocFailed ); + if( pParse->db->mallocFailed ) return; if( p->selFlags & SF_HasTypeInfo ) return; sqlite3SelectExpand(pParse, p); - if( pParse->nErr || db->mallocFailed ) return; + if( pParse->nErr || pParse->db->mallocFailed ) return; sqlite3ResolveSelectNames(pParse, p, pOuterNC); - if( pParse->nErr || db->mallocFailed ) return; + if( pParse->nErr || pParse->db->mallocFailed ) return; sqlite3SelectAddTypeInfo(pParse, p); } @@ -120612,14 +126491,11 @@ static void explainSimpleCount( ){ if( pParse->explain==2 ){ int bCover = (pIdx!=0 && (HasRowid(pTab) || !IsPrimaryKeyIndex(pIdx))); - char *zEqp = sqlite3MPrintf(pParse->db, "SCAN TABLE %s%s%s", + sqlite3VdbeExplain(pParse, 0, "SCAN TABLE %s%s%s", pTab->zName, bCover ? " USING COVERING INDEX " : "", bCover ? pIdx->zName : "" ); - sqlite3VdbeAddOp4( - pParse->pVdbe, OP_Explain, pParse->iSelectId, 0, 0, zEqp, P4_DYNAMIC - ); } } #else @@ -120627,6 +126503,176 @@ static void explainSimpleCount( #endif /* +** sqlite3WalkExpr() callback used by havingToWhere(). +** +** If the node passed to the callback is a TK_AND node, return +** WRC_Continue to tell sqlite3WalkExpr() to iterate through child nodes. +** +** Otherwise, return WRC_Prune. In this case, also check if the +** sub-expression matches the criteria for being moved to the WHERE +** clause. If so, add it to the WHERE clause and replace the sub-expression +** within the HAVING expression with a constant "1". +*/ +static int havingToWhereExprCb(Walker *pWalker, Expr *pExpr){ + if( pExpr->op!=TK_AND ){ + Select *pS = pWalker->u.pSelect; + if( sqlite3ExprIsConstantOrGroupBy(pWalker->pParse, pExpr, pS->pGroupBy) ){ + sqlite3 *db = pWalker->pParse->db; + Expr *pNew = sqlite3ExprAlloc(db, TK_INTEGER, &sqlite3IntTokens[1], 0); + if( pNew ){ + Expr *pWhere = pS->pWhere; + SWAP(Expr, *pNew, *pExpr); + pNew = sqlite3ExprAnd(db, pWhere, pNew); + pS->pWhere = pNew; + pWalker->eCode = 1; + } + } + return WRC_Prune; + } + return WRC_Continue; +} + +/* +** Transfer eligible terms from the HAVING clause of a query, which is +** processed after grouping, to the WHERE clause, which is processed before +** grouping. For example, the query: +** +** SELECT * FROM <tables> WHERE a=? GROUP BY b HAVING b=? AND c=? +** +** can be rewritten as: +** +** SELECT * FROM <tables> WHERE a=? AND b=? GROUP BY b HAVING c=? +** +** A term of the HAVING expression is eligible for transfer if it consists +** entirely of constants and expressions that are also GROUP BY terms that +** use the "BINARY" collation sequence. +*/ +static void havingToWhere(Parse *pParse, Select *p){ + Walker sWalker; + memset(&sWalker, 0, sizeof(sWalker)); + sWalker.pParse = pParse; + sWalker.xExprCallback = havingToWhereExprCb; + sWalker.u.pSelect = p; + sqlite3WalkExpr(&sWalker, p->pHaving); +#if SELECTTRACE_ENABLED + if( sWalker.eCode && (sqlite3SelectTrace & 0x100)!=0 ){ + SELECTTRACE(0x100,pParse,p,("Move HAVING terms into WHERE:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif +} + +/* +** Check to see if the pThis entry of pTabList is a self-join of a prior view. +** If it is, then return the SrcList_item for the prior view. If it is not, +** then return 0. +*/ +static struct SrcList_item *isSelfJoinView( + SrcList *pTabList, /* Search for self-joins in this FROM clause */ + struct SrcList_item *pThis /* Search for prior reference to this subquery */ +){ + struct SrcList_item *pItem; + for(pItem = pTabList->a; pItem<pThis; pItem++){ + if( pItem->pSelect==0 ) continue; + if( pItem->fg.viaCoroutine ) continue; + if( pItem->zName==0 ) continue; + if( sqlite3_stricmp(pItem->zDatabase, pThis->zDatabase)!=0 ) continue; + if( sqlite3_stricmp(pItem->zName, pThis->zName)!=0 ) continue; + if( sqlite3ExprCompare(0, + pThis->pSelect->pWhere, pItem->pSelect->pWhere, -1) + ){ + /* The view was modified by some other optimization such as + ** pushDownWhereTerms() */ + continue; + } + return pItem; + } + return 0; +} + +#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION +/* +** Attempt to transform a query of the form +** +** SELECT count(*) FROM (SELECT x FROM t1 UNION ALL SELECT y FROM t2) +** +** Into this: +** +** SELECT (SELECT count(*) FROM t1)+(SELECT count(*) FROM t2) +** +** The transformation only works if all of the following are true: +** +** * The subquery is a UNION ALL of two or more terms +** * There is no WHERE or GROUP BY or HAVING clauses on the subqueries +** * The outer query is a simple count(*) +** +** Return TRUE if the optimization is undertaken. +*/ +static int countOfViewOptimization(Parse *pParse, Select *p){ + Select *pSub, *pPrior; + Expr *pExpr; + Expr *pCount; + sqlite3 *db; + if( (p->selFlags & SF_Aggregate)==0 ) return 0; /* This is an aggregate */ + if( p->pEList->nExpr!=1 ) return 0; /* Single result column */ + pExpr = p->pEList->a[0].pExpr; + if( pExpr->op!=TK_AGG_FUNCTION ) return 0; /* Result is an aggregate */ + if( sqlite3_stricmp(pExpr->u.zToken,"count") ) return 0; /* Is count() */ + if( pExpr->x.pList!=0 ) return 0; /* Must be count(*) */ + if( p->pSrc->nSrc!=1 ) return 0; /* One table in FROM */ + pSub = p->pSrc->a[0].pSelect; + if( pSub==0 ) return 0; /* The FROM is a subquery */ + if( pSub->pPrior==0 ) return 0; /* Must be a compound ry */ + do{ + if( pSub->op!=TK_ALL && pSub->pPrior ) return 0; /* Must be UNION ALL */ + if( pSub->pWhere ) return 0; /* No WHERE clause */ + if( pSub->selFlags & SF_Aggregate ) return 0; /* Not an aggregate */ + pSub = pSub->pPrior; /* Repeat over compound */ + }while( pSub ); + + /* If we reach this point then it is OK to perform the transformation */ + + db = pParse->db; + pCount = pExpr; + pExpr = 0; + pSub = p->pSrc->a[0].pSelect; + p->pSrc->a[0].pSelect = 0; + sqlite3SrcListDelete(db, p->pSrc); + p->pSrc = sqlite3DbMallocZero(pParse->db, sizeof(*p->pSrc)); + while( pSub ){ + Expr *pTerm; + pPrior = pSub->pPrior; + pSub->pPrior = 0; + pSub->pNext = 0; + pSub->selFlags |= SF_Aggregate; + pSub->selFlags &= ~SF_Compound; + pSub->nSelectRow = 0; + sqlite3ExprListDelete(db, pSub->pEList); + pTerm = pPrior ? sqlite3ExprDup(db, pCount, 0) : pCount; + pSub->pEList = sqlite3ExprListAppend(pParse, 0, pTerm); + pTerm = sqlite3PExpr(pParse, TK_SELECT, 0, 0); + sqlite3PExprAddSelect(pParse, pTerm, pSub); + if( pExpr==0 ){ + pExpr = pTerm; + }else{ + pExpr = sqlite3PExpr(pParse, TK_PLUS, pTerm, pExpr); + } + pSub = pPrior; + } + p->pEList->a[0].pExpr = pExpr; + p->selFlags &= ~SF_Aggregate; + +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x400 ){ + SELECTTRACE(0x400,pParse,p,("After count-of-view optimization:\n")); + sqlite3TreeViewSelect(0, p, 0); + } +#endif + return 1; +} +#endif /* SQLITE_COUNTOFVIEW_OPTIMIZATION */ + +/* ** Generate code for the SELECT statement given in the p argument. ** ** The results are returned according to the SelectDest structure. @@ -120659,21 +126705,18 @@ SQLITE_PRIVATE int sqlite3Select( AggInfo sAggInfo; /* Information used by aggregate queries */ int iEnd; /* Address of the end of the query */ sqlite3 *db; /* The database connection */ - -#ifndef SQLITE_OMIT_EXPLAIN - int iRestoreSelectId = pParse->iSelectId; - pParse->iSelectId = pParse->iNextSelectId++; -#endif + ExprList *pMinMaxOrderBy = 0; /* Added ORDER BY for min/max queries */ + u8 minMaxFlag; /* Flag for min/max queries */ db = pParse->db; + v = sqlite3GetVdbe(pParse); if( p==0 || db->mallocFailed || pParse->nErr ){ return 1; } if( sqlite3AuthCheck(pParse, SQLITE_SELECT, 0, 0, 0) ) return 1; memset(&sAggInfo, 0, sizeof(sAggInfo)); #if SELECTTRACE_ENABLED - pParse->nSelectIndent++; - SELECTTRACE(1,pParse,p, ("begin processing:\n")); + SELECTTRACE(1,pParse,p, ("begin processing:\n", pParse->addrExplain)); if( sqlite3SelectTrace & 0x100 ){ sqlite3TreeViewSelect(0, p, 0); } @@ -120704,20 +126747,39 @@ SQLITE_PRIVATE int sqlite3Select( assert( p->pEList!=0 ); isAgg = (p->selFlags & SF_Aggregate)!=0; #if SELECTTRACE_ENABLED - if( sqlite3SelectTrace & 0x100 ){ - SELECTTRACE(0x100,pParse,p, ("after name resolution:\n")); + if( sqlite3SelectTrace & 0x104 ){ + SELECTTRACE(0x104,pParse,p, ("after name resolution:\n")); sqlite3TreeViewSelect(0, p, 0); } #endif - /* Try to flatten subqueries in the FROM clause up into the main query + if( pDest->eDest==SRT_Output ){ + generateColumnNames(pParse, p); + } + + /* Try to various optimizations (flattening subqueries, and strength + ** reduction of join operators) in the FROM clause up into the main query */ #if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) for(i=0; !p->pPrior && i<pTabList->nSrc; i++){ struct SrcList_item *pItem = &pTabList->a[i]; Select *pSub = pItem->pSelect; - int isAggSub; Table *pTab = pItem->pTab; + + /* Convert LEFT JOIN into JOIN if there are terms of the right table + ** of the LEFT JOIN used in the WHERE clause. + */ + if( (pItem->fg.jointype & JT_LEFT)!=0 + && sqlite3ExprImpliesNonNullRow(p->pWhere, pItem->iCursor) + && OptimizationEnabled(db, SQLITE_SimplifyJoin) + ){ + SELECTTRACE(0x100,pParse,p, + ("LEFT-JOIN simplifies to JOIN on term %d\n",i)); + pItem->fg.jointype &= ~(JT_LEFT|JT_OUTER); + unsetJoinExpr(p->pWhere, pItem->iCursor); + } + + /* No futher action if this term of the FROM clause is no a subquery */ if( pSub==0 ) continue; /* Catch mismatch in the declared columns of a view and the number of @@ -120728,13 +126790,45 @@ SQLITE_PRIVATE int sqlite3Select( goto select_end; } - isAggSub = (pSub->selFlags & SF_Aggregate)!=0; - if( flattenSubquery(pParse, p, i, isAgg, isAggSub) ){ + /* Do not try to flatten an aggregate subquery. + ** + ** Flattening an aggregate subquery is only possible if the outer query + ** is not a join. But if the outer query is not a join, then the subquery + ** will be implemented as a co-routine and there is no advantage to + ** flattening in that case. + */ + if( (pSub->selFlags & SF_Aggregate)!=0 ) continue; + assert( pSub->pGroupBy==0 ); + + /* If the outer query contains a "complex" result set (that is, + ** if the result set of the outer query uses functions or subqueries) + ** and if the subquery contains an ORDER BY clause and if + ** it will be implemented as a co-routine, then do not flatten. This + ** restriction allows SQL constructs like this: + ** + ** SELECT expensive_function(x) + ** FROM (SELECT x FROM tab ORDER BY y LIMIT 10); + ** + ** The expensive_function() is only computed on the 10 rows that + ** are output, rather than every row of the table. + ** + ** The requirement that the outer query have a complex result set + ** means that flattening does occur on simpler SQL constraints without + ** the expensive_function() like: + ** + ** SELECT x FROM (SELECT x FROM tab ORDER BY y LIMIT 10); + */ + if( pSub->pOrderBy!=0 + && i==0 + && (p->selFlags & SF_ComplexResult)!=0 + && (pTabList->nSrc==1 + || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0) + ){ + continue; + } + + if( flattenSubquery(pParse, p, i, isAgg) ){ /* This subquery can be absorbed into its parent. */ - if( isAggSub ){ - isAgg = 1; - p->selFlags |= SF_Aggregate; - } i = -1; } pTabList = p->pSrc; @@ -120745,33 +126839,59 @@ SQLITE_PRIVATE int sqlite3Select( } #endif - /* Get a pointer the VDBE under construction, allocating a new VDBE if one - ** does not already exist */ - v = sqlite3GetVdbe(pParse); - if( v==0 ) goto select_end; - #ifndef SQLITE_OMIT_COMPOUND_SELECT /* Handle compound SELECT statements using the separate multiSelect() ** procedure. */ if( p->pPrior ){ rc = multiSelect(pParse, p, pDest); - explainSetInteger(pParse->iSelectId, iRestoreSelectId); #if SELECTTRACE_ENABLED - SELECTTRACE(1,pParse,p,("end compound-select processing\n")); - pParse->nSelectIndent--; + SELECTTRACE(0x1,pParse,p,("end compound-select processing\n")); + if( (sqlite3SelectTrace & 0x2000)!=0 && ExplainQueryPlanParent(pParse)==0 ){ + sqlite3TreeViewSelect(0, p, 0); + } #endif + if( p->pNext==0 ) ExplainQueryPlanPop(pParse); return rc; } #endif - /* Generate code for all sub-queries in the FROM clause + /* For each term in the FROM clause, do two things: + ** (1) Authorized unreferenced tables + ** (2) Generate code for all sub-queries */ -#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) for(i=0; i<pTabList->nSrc; i++){ struct SrcList_item *pItem = &pTabList->a[i]; SelectDest dest; - Select *pSub = pItem->pSelect; + Select *pSub; +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + const char *zSavedAuthContext; +#endif + + /* Issue SQLITE_READ authorizations with a fake column name for any + ** tables that are referenced but from which no values are extracted. + ** Examples of where these kinds of null SQLITE_READ authorizations + ** would occur: + ** + ** SELECT count(*) FROM t1; -- SQLITE_READ t1."" + ** SELECT t1.* FROM t1, t2; -- SQLITE_READ t2."" + ** + ** The fake column name is an empty string. It is possible for a table to + ** have a column named by the empty string, in which case there is no way to + ** distinguish between an unreferenced table and an actual reference to the + ** "" column. The original design was for the fake column name to be a NULL, + ** which would be unambiguous. But legacy authorization callbacks might + ** assume the column name is non-NULL and segfault. The use of an empty + ** string for the fake column name seems safer. + */ + if( pItem->colUsed==0 ){ + sqlite3AuthCheck(pParse, SQLITE_READ, pItem->zName, "", pItem->zDatabase); + } + +#if !defined(SQLITE_OMIT_SUBQUERY) || !defined(SQLITE_OMIT_VIEW) + /* Generate code for all sub-queries in the FROM clause + */ + pSub = pItem->pSelect; if( pSub==0 ) continue; /* Sometimes the code for a subquery will be generated more than @@ -120782,6 +126902,10 @@ SQLITE_PRIVATE int sqlite3Select( ** to be invoked again. */ if( pItem->addrFillSub ){ if( pItem->fg.viaCoroutine==0 ){ + /* The subroutine that manifests the view might be a one-time routine, + ** or it might need to be rerun on each iteration because it + ** encodes a correlated subquery. */ + testcase( sqlite3VdbeGetOp(v, pItem->addrFillSub)->opcode==OP_Once ); sqlite3VdbeAddOp2(v, OP_Gosub, pItem->regReturn, pItem->addrFillSub); } continue; @@ -120799,8 +126923,9 @@ SQLITE_PRIVATE int sqlite3Select( /* Make copies of constant WHERE-clause terms in the outer query down ** inside the subquery. This can help the subquery to run more efficiently. */ - if( (pItem->fg.jointype & JT_OUTER)==0 - && pushDownWhereTerms(pParse, pSub, p->pWhere, pItem->iCursor) + if( OptimizationEnabled(db, SQLITE_PushDown) + && pushDownWhereTerms(pParse, pSub, p->pWhere, pItem->iCursor, + (pItem->fg.jointype & JT_OUTER)!=0) ){ #if SELECTTRACE_ENABLED if( sqlite3SelectTrace & 0x100 ){ @@ -120808,18 +126933,18 @@ SQLITE_PRIVATE int sqlite3Select( sqlite3TreeViewSelect(0, p, 0); } #endif + }else{ + SELECTTRACE(0x100,pParse,p,("Push-down not possible\n")); } + zSavedAuthContext = pParse->zAuthContext; + pParse->zAuthContext = pItem->zName; + /* Generate code to implement the subquery ** - ** The subquery is implemented as a co-routine if all of these are true: - ** (1) The subquery is guaranteed to be the outer loop (so that it - ** does not need to be computed more than once) - ** (2) The ALL keyword after SELECT is omitted. (Applications are - ** allowed to say "SELECT ALL" instead of just "SELECT" to disable - ** the use of co-routines.) - ** (3) Co-routines are not disabled using sqlite3_test_control() - ** with SQLITE_TESTCTRL_OPTIMIZATIONS. + ** The subquery is implemented as a co-routine if the subquery is + ** guaranteed to be the outer loop (so that it does not need to be + ** computed more than once) ** ** TODO: Are there other reasons beside (1) to use a co-routine ** implementation? @@ -120827,19 +126952,18 @@ SQLITE_PRIVATE int sqlite3Select( if( i==0 && (pTabList->nSrc==1 || (pTabList->a[1].fg.jointype&(JT_LEFT|JT_CROSS))!=0) /* (1) */ - && (p->selFlags & SF_All)==0 /* (2) */ - && OptimizationEnabled(db, SQLITE_SubqCoroutine) /* (3) */ ){ /* Implement a co-routine that will return a single row of the result ** set on each invocation. */ int addrTop = sqlite3VdbeCurrentAddr(v)+1; + pItem->regReturn = ++pParse->nMem; sqlite3VdbeAddOp3(v, OP_InitCoroutine, pItem->regReturn, 0, addrTop); VdbeComment((v, "%s", pItem->pTab->zName)); pItem->addrFillSub = addrTop; sqlite3SelectDestInit(&dest, SRT_Coroutine, pItem->regReturn); - explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); + ExplainQueryPlan((pParse, 1, "CO-ROUTINE 0x%p", pSub)); sqlite3Select(pParse, pSub, &dest); pItem->pTab->nRowLogEst = pSub->nSelectRow; pItem->fg.viaCoroutine = 1; @@ -120856,6 +126980,8 @@ SQLITE_PRIVATE int sqlite3Select( int topAddr; int onceAddr = 0; int retAddr; + struct SrcList_item *pPrior; + assert( pItem->addrFillSub==0 ); pItem->regReturn = ++pParse->nMem; topAddr = sqlite3VdbeAddOp2(v, OP_Integer, 0, pItem->regReturn); @@ -120869,9 +126995,16 @@ SQLITE_PRIVATE int sqlite3Select( }else{ VdbeNoopComment((v, "materialize \"%s\"", pItem->pTab->zName)); } - sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor); - explainSetInteger(pItem->iSelectId, (u8)pParse->iNextSelectId); - sqlite3Select(pParse, pSub, &dest); + pPrior = isSelfJoinView(pTabList, pItem); + if( pPrior ){ + sqlite3VdbeAddOp2(v, OP_OpenDup, pItem->iCursor, pPrior->iCursor); + assert( pPrior->pSelect!=0 ); + pSub->nSelectRow = pPrior->pSelect->nSelectRow; + }else{ + sqlite3SelectDestInit(&dest, SRT_EphemTab, pItem->iCursor); + ExplainQueryPlan((pParse, 1, "MATERIALIZE 0x%p", pSub)); + sqlite3Select(pParse, pSub, &dest); + } pItem->pTab->nRowLogEst = pSub->nSelectRow; if( onceAddr ) sqlite3VdbeJumpHere(v, onceAddr); retAddr = sqlite3VdbeAddOp1(v, OP_Return, pItem->regReturn); @@ -120881,8 +127014,9 @@ SQLITE_PRIVATE int sqlite3Select( } if( db->mallocFailed ) goto select_end; pParse->nHeight -= sqlite3SelectExprHeight(p); - } + pParse->zAuthContext = zSavedAuthContext; #endif + } /* Various elements of the SELECT copied into local variables for ** convenience */ @@ -120899,6 +127033,16 @@ SQLITE_PRIVATE int sqlite3Select( } #endif +#ifdef SQLITE_COUNTOFVIEW_OPTIMIZATION + if( OptimizationEnabled(db, SQLITE_QueryFlattener|SQLITE_CountOfView) + && countOfViewOptimization(pParse, p) + ){ + if( db->mallocFailed ) goto select_end; + pEList = p->pEList; + pTabList = p->pSrc; + } +#endif + /* If the query is DISTINCT with an ORDER BY but is not an aggregate, and ** if the select-list is the same as the ORDER BY list, then this query ** can be rewritten as a GROUP BY. In other words, this: @@ -120992,6 +127136,7 @@ SQLITE_PRIVATE int sqlite3Select( wctrlFlags |= p->selFlags & SF_FixedLimit; /* Begin the database scan. */ + SELECTTRACE(1,pParse,p,("WhereBegin\n")); pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, sSort.pOrderBy, p->pEList, wctrlFlags, p->nSelectRow); if( pWInfo==0 ) goto select_end; @@ -121018,7 +127163,8 @@ SQLITE_PRIVATE int sqlite3Select( } /* Use the standard inner loop. */ - selectInnerLoop(pParse, p, pEList, -1, &sSort, &sDistinct, pDest, + assert( p->pEList==pEList ); + selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest, sqlite3WhereContinueLabel(pWInfo), sqlite3WhereBreakLabel(pWInfo)); @@ -121083,16 +127229,29 @@ SQLITE_PRIVATE int sqlite3Select( memset(&sNC, 0, sizeof(sNC)); sNC.pParse = pParse; sNC.pSrcList = pTabList; - sNC.pAggInfo = &sAggInfo; + sNC.uNC.pAggInfo = &sAggInfo; + VVA_ONLY( sNC.ncFlags = NC_UAggInfo; ) sAggInfo.mnReg = pParse->nMem+1; sAggInfo.nSortingColumn = pGroupBy ? pGroupBy->nExpr : 0; sAggInfo.pGroupBy = pGroupBy; sqlite3ExprAnalyzeAggList(&sNC, pEList); sqlite3ExprAnalyzeAggList(&sNC, sSort.pOrderBy); if( pHaving ){ + if( pGroupBy ){ + assert( pWhere==p->pWhere ); + assert( pHaving==p->pHaving ); + assert( pGroupBy==p->pGroupBy ); + havingToWhere(pParse, p); + pWhere = p->pWhere; + } sqlite3ExprAnalyzeAggregates(&sNC, pHaving); } sAggInfo.nAccumulator = sAggInfo.nColumn; + if( p->pGroupBy==0 && p->pHaving==0 && sAggInfo.nFunc==1 ){ + minMaxFlag = minMaxQuery(db, sAggInfo.aFunc[0].pExpr, &pMinMaxOrderBy); + }else{ + minMaxFlag = WHERE_ORDERBY_NORMAL; + } for(i=0; i<sAggInfo.nFunc; i++){ assert( !ExprHasProperty(sAggInfo.aFunc[i].pExpr, EP_xIsSelect) ); sNC.ncFlags |= NC_InAggFunc; @@ -121101,6 +127260,24 @@ SQLITE_PRIVATE int sqlite3Select( } sAggInfo.mxReg = pParse->nMem; if( db->mallocFailed ) goto select_end; +#if SELECTTRACE_ENABLED + if( sqlite3SelectTrace & 0x400 ){ + int ii; + SELECTTRACE(0x400,pParse,p,("After aggregate analysis:\n")); + sqlite3TreeViewSelect(0, p, 0); + for(ii=0; ii<sAggInfo.nColumn; ii++){ + sqlite3DebugPrintf("agg-column[%d] iMem=%d\n", + ii, sAggInfo.aCol[ii].iMem); + sqlite3TreeViewExpr(0, sAggInfo.aCol[ii].pExpr, 0); + } + for(ii=0; ii<sAggInfo.nFunc; ii++){ + sqlite3DebugPrintf("agg-func[%d]: iMem=%d\n", + ii, sAggInfo.aFunc[ii].iMem); + sqlite3TreeViewExpr(0, sAggInfo.aFunc[ii].pExpr, 0); + } + } +#endif + /* Processing for aggregates with GROUP BY is very different and ** much more complex than aggregates without a GROUP BY. @@ -121151,6 +127328,7 @@ SQLITE_PRIVATE int sqlite3Select( ** in the right order to begin with. */ sqlite3VdbeAddOp2(v, OP_Gosub, regReset, addrReset); + SELECTTRACE(1,pParse,p,("WhereBegin\n")); pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pGroupBy, 0, WHERE_GROUPBY | (orderByGrp ? WHERE_SORTBYGROUP : 0), 0 ); @@ -121316,7 +127494,7 @@ SQLITE_PRIVATE int sqlite3Select( sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); finalizeAggFunctions(pParse, &sAggInfo); sqlite3ExprIfFalse(pParse, pHaving, addrOutputRow+1, SQLITE_JUMPIFNULL); - selectInnerLoop(pParse, p, p->pEList, -1, &sSort, + selectInnerLoop(pParse, p, -1, &sSort, &sDistinct, pDest, addrOutputRow+1, addrSetAbort); sqlite3VdbeAddOp1(v, OP_Return, regOutputRow); @@ -121330,7 +127508,6 @@ SQLITE_PRIVATE int sqlite3Select( } /* endif pGroupBy. Begin aggregate queries without GROUP BY: */ else { - ExprList *pDel = 0; #ifndef SQLITE_OMIT_BTREECOUNT Table *pTab; if( (pTab = isSimpleCount(p, &sAggInfo))!=0 ){ @@ -121392,67 +127569,32 @@ SQLITE_PRIVATE int sqlite3Select( }else #endif /* SQLITE_OMIT_BTREECOUNT */ { - /* Check if the query is of one of the following forms: - ** - ** SELECT min(x) FROM ... - ** SELECT max(x) FROM ... - ** - ** If it is, then ask the code in where.c to attempt to sort results - ** as if there was an "ORDER ON x" or "ORDER ON x DESC" clause. - ** If where.c is able to produce results sorted in this order, then - ** add vdbe code to break out of the processing loop after the - ** first iteration (since the first iteration of the loop is - ** guaranteed to operate on the row with the minimum or maximum - ** value of x, the only row required). - ** - ** A special flag must be passed to sqlite3WhereBegin() to slightly - ** modify behavior as follows: - ** - ** + If the query is a "SELECT min(x)", then the loop coded by - ** where.c should not iterate over any values with a NULL value - ** for x. - ** - ** + The optimizer code in where.c (the thing that decides which - ** index or indices to use) should place a different priority on - ** satisfying the 'ORDER BY' clause than it does in other cases. - ** Refer to code and comments in where.c for details. - */ - ExprList *pMinMax = 0; - u8 flag = WHERE_ORDERBY_NORMAL; - - assert( p->pGroupBy==0 ); - assert( flag==0 ); - if( p->pHaving==0 ){ - flag = minMaxQuery(&sAggInfo, &pMinMax); - } - assert( flag==0 || (pMinMax!=0 && pMinMax->nExpr==1) ); - - if( flag ){ - pMinMax = sqlite3ExprListDup(db, pMinMax, 0); - pDel = pMinMax; - assert( db->mallocFailed || pMinMax!=0 ); - if( !db->mallocFailed ){ - pMinMax->a[0].sortOrder = flag!=WHERE_ORDERBY_MIN ?1:0; - pMinMax->a[0].pExpr->op = TK_COLUMN; - } - } - /* This case runs if the aggregate has no GROUP BY clause. The ** processing is much simpler since there is only a single row ** of output. */ + assert( p->pGroupBy==0 ); resetAccumulator(pParse, &sAggInfo); - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMax, 0,flag,0); + + /* If this query is a candidate for the min/max optimization, then + ** minMaxFlag will have been previously set to either + ** WHERE_ORDERBY_MIN or WHERE_ORDERBY_MAX and pMinMaxOrderBy will + ** be an appropriate ORDER BY expression for the optimization. + */ + assert( minMaxFlag==WHERE_ORDERBY_NORMAL || pMinMaxOrderBy!=0 ); + assert( pMinMaxOrderBy==0 || pMinMaxOrderBy->nExpr==1 ); + + SELECTTRACE(1,pParse,p,("WhereBegin\n")); + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, pMinMaxOrderBy, + 0, minMaxFlag, 0); if( pWInfo==0 ){ - sqlite3ExprListDelete(db, pDel); goto select_end; } updateAccumulator(pParse, &sAggInfo); - assert( pMinMax==0 || pMinMax->nExpr==1 ); if( sqlite3WhereIsOrdered(pWInfo)>0 ){ sqlite3VdbeGoto(v, sqlite3WhereBreakLabel(pWInfo)); VdbeComment((v, "%s() by index", - (flag==WHERE_ORDERBY_MIN?"min":"max"))); + (minMaxFlag==WHERE_ORDERBY_MIN?"min":"max"))); } sqlite3WhereEnd(pWInfo); finalizeAggFunctions(pParse, &sAggInfo); @@ -121460,9 +127602,8 @@ SQLITE_PRIVATE int sqlite3Select( sSort.pOrderBy = 0; sqlite3ExprIfFalse(pParse, pHaving, addrEnd, SQLITE_JUMPIFNULL); - selectInnerLoop(pParse, p, p->pEList, -1, 0, 0, + selectInnerLoop(pParse, p, -1, 0, 0, pDest, addrEnd, addrEnd); - sqlite3ExprListDelete(db, pDel); } sqlite3VdbeResolveLabel(v, addrEnd); @@ -121478,6 +127619,7 @@ SQLITE_PRIVATE int sqlite3Select( if( sSort.pOrderBy ){ explainTempTable(pParse, sSort.nOBSat>0 ? "RIGHT PART OF ORDER BY":"ORDER BY"); + assert( p->pEList==pEList ); generateSortTail(pParse, p, &sSort, pEList->nExpr, pDest); } @@ -121493,20 +127635,16 @@ SQLITE_PRIVATE int sqlite3Select( ** successful coding of the SELECT. */ select_end: - explainSetInteger(pParse->iSelectId, iRestoreSelectId); - - /* Identify column names if results of the SELECT are to be output. - */ - if( rc==SQLITE_OK && pDest->eDest==SRT_Output ){ - generateColumnNames(pParse, pTabList, pEList); - } - + sqlite3ExprListDelete(db, pMinMaxOrderBy); sqlite3DbFree(db, sAggInfo.aCol); sqlite3DbFree(db, sAggInfo.aFunc); #if SELECTTRACE_ENABLED - SELECTTRACE(1,pParse,p,("end processing\n")); - pParse->nSelectIndent--; + SELECTTRACE(0x1,pParse,p,("end processing\n")); + if( (sqlite3SelectTrace & 0x2000)!=0 && ExplainQueryPlanParent(pParse)==0 ){ + sqlite3TreeViewSelect(0, p, 0); + } #endif + ExplainQueryPlanPop(pParse); return rc; } @@ -121740,6 +127878,8 @@ SQLITE_PRIVATE void sqlite3DeleteTriggerStep(sqlite3 *db, TriggerStep *pTriggerS sqlite3ExprListDelete(db, pTmp->pExprList); sqlite3SelectDelete(db, pTmp->pSelect); sqlite3IdListDelete(db, pTmp->pIdList); + sqlite3UpsertDelete(db, pTmp->pUpsert); + sqlite3DbFree(db, pTmp->zSpan); sqlite3DbFree(db, pTmp); } @@ -122021,6 +128161,7 @@ SQLITE_PRIVATE void sqlite3FinishTrigger( if( v==0 ) goto triggerfinish_cleanup; sqlite3BeginWriteOperation(pParse, 0, iDb); z = sqlite3DbStrNDup(db, (char*)pAll->z, pAll->n); + testcase( z==0 ); sqlite3NestedParse(pParse, "INSERT INTO %Q.%s VALUES('trigger',%Q,%Q,0,'CREATE TRIGGER %q')", db->aDb[iDb].zDbSName, MASTER_NAME, zName, @@ -122054,13 +128195,29 @@ triggerfinish_cleanup: } /* +** Duplicate a range of text from an SQL statement, then convert all +** whitespace characters into ordinary space characters. +*/ +static char *triggerSpanDup(sqlite3 *db, const char *zStart, const char *zEnd){ + char *z = sqlite3DbSpanDup(db, zStart, zEnd); + int i; + if( z ) for(i=0; z[i]; i++) if( sqlite3Isspace(z[i]) ) z[i] = ' '; + return z; +} + +/* ** Turn a SELECT statement (that the pSelect parameter points to) into ** a trigger step. Return a pointer to a TriggerStep structure. ** ** The parser calls this routine when it finds a SELECT statement in ** body of a TRIGGER. */ -SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3 *db, Select *pSelect){ +SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep( + sqlite3 *db, /* Database connection */ + Select *pSelect, /* The SELECT statement */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ +){ TriggerStep *pTriggerStep = sqlite3DbMallocZero(db, sizeof(TriggerStep)); if( pTriggerStep==0 ) { sqlite3SelectDelete(db, pSelect); @@ -122069,6 +128226,7 @@ SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3 *db, Select *pSelec pTriggerStep->op = TK_SELECT; pTriggerStep->pSelect = pSelect; pTriggerStep->orconf = OE_Default; + pTriggerStep->zSpan = triggerSpanDup(db, zStart, zEnd); return pTriggerStep; } @@ -122081,7 +128239,9 @@ SQLITE_PRIVATE TriggerStep *sqlite3TriggerSelectStep(sqlite3 *db, Select *pSelec static TriggerStep *triggerStepAllocate( sqlite3 *db, /* Database connection */ u8 op, /* Trigger opcode */ - Token *pName /* The target name */ + Token *pName, /* The target name */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ TriggerStep *pTriggerStep; @@ -122092,6 +128252,7 @@ static TriggerStep *triggerStepAllocate( sqlite3Dequote(z); pTriggerStep->zTarget = z; pTriggerStep->op = op; + pTriggerStep->zSpan = triggerSpanDup(db, zStart, zEnd); } return pTriggerStep; } @@ -122108,19 +128269,26 @@ SQLITE_PRIVATE TriggerStep *sqlite3TriggerInsertStep( Token *pTableName, /* Name of the table into which we insert */ IdList *pColumn, /* List of columns in pTableName to insert into */ Select *pSelect, /* A SELECT statement that supplies values */ - u8 orconf /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */ + u8 orconf, /* The conflict algorithm (OE_Abort, OE_Replace, etc.) */ + Upsert *pUpsert, /* ON CONFLICT clauses for upsert */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ TriggerStep *pTriggerStep; assert(pSelect != 0 || db->mallocFailed); - pTriggerStep = triggerStepAllocate(db, TK_INSERT, pTableName); + pTriggerStep = triggerStepAllocate(db, TK_INSERT, pTableName, zStart, zEnd); if( pTriggerStep ){ pTriggerStep->pSelect = sqlite3SelectDup(db, pSelect, EXPRDUP_REDUCE); pTriggerStep->pIdList = pColumn; + pTriggerStep->pUpsert = pUpsert; pTriggerStep->orconf = orconf; }else{ + testcase( pColumn ); sqlite3IdListDelete(db, pColumn); + testcase( pUpsert ); + sqlite3UpsertDelete(db, pUpsert); } sqlite3SelectDelete(db, pSelect); @@ -122137,11 +128305,13 @@ SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep( Token *pTableName, /* Name of the table to be updated */ ExprList *pEList, /* The SET clause: list of column and new values */ Expr *pWhere, /* The WHERE clause */ - u8 orconf /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */ + u8 orconf, /* The conflict algorithm. (OE_Abort, OE_Ignore, etc) */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ TriggerStep *pTriggerStep; - pTriggerStep = triggerStepAllocate(db, TK_UPDATE, pTableName); + pTriggerStep = triggerStepAllocate(db, TK_UPDATE, pTableName, zStart, zEnd); if( pTriggerStep ){ pTriggerStep->pExprList = sqlite3ExprListDup(db, pEList, EXPRDUP_REDUCE); pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); @@ -122160,11 +128330,13 @@ SQLITE_PRIVATE TriggerStep *sqlite3TriggerUpdateStep( SQLITE_PRIVATE TriggerStep *sqlite3TriggerDeleteStep( sqlite3 *db, /* Database connection */ Token *pTableName, /* The table from which rows are deleted */ - Expr *pWhere /* The WHERE clause */ + Expr *pWhere, /* The WHERE clause */ + const char *zStart, /* Start of SQL text */ + const char *zEnd /* End of SQL text */ ){ TriggerStep *pTriggerStep; - pTriggerStep = triggerStepAllocate(db, TK_DELETE, pTableName); + pTriggerStep = triggerStepAllocate(db, TK_DELETE, pTableName, zStart, zEnd); if( pTriggerStep ){ pTriggerStep->pWhere = sqlite3ExprDup(db, pWhere, EXPRDUP_REDUCE); pTriggerStep->orconf = OE_Default; @@ -122299,7 +128471,7 @@ SQLITE_PRIVATE void sqlite3UnlinkAndDeleteTrigger(sqlite3 *db, int iDb, const ch *pp = (*pp)->pNext; } sqlite3DeleteTrigger(db, pTrigger); - db->flags |= SQLITE_InternChanges; + db->mDbFlags |= DBFLAG_SchemaChange; } } @@ -122419,13 +128591,21 @@ static int codeTriggerProgram( pParse->eOrconf = (orconf==OE_Default)?pStep->orconf:(u8)orconf; assert( pParse->okConstFactor==0 ); +#ifndef SQLITE_OMIT_TRACE + if( pStep->zSpan ){ + sqlite3VdbeAddOp4(v, OP_Trace, 0x7fffffff, 1, 0, + sqlite3MPrintf(db, "-- %s", pStep->zSpan), + P4_DYNAMIC); + } +#endif + switch( pStep->op ){ case TK_UPDATE: { sqlite3Update(pParse, targetSrcList(pParse, pStep), sqlite3ExprListDup(db, pStep->pExprList, 0), sqlite3ExprDup(db, pStep->pWhere, 0), - pParse->eOrconf + pParse->eOrconf, 0, 0, 0 ); break; } @@ -122434,14 +128614,15 @@ static int codeTriggerProgram( targetSrcList(pParse, pStep), sqlite3SelectDup(db, pStep->pSelect, 0), sqlite3IdListDup(db, pStep->pIdList), - pParse->eOrconf + pParse->eOrconf, + sqlite3UpsertDup(db, pStep->pUpsert) ); break; } case TK_DELETE: { sqlite3DeleteFrom(pParse, targetSrcList(pParse, pStep), - sqlite3ExprDup(db, pStep->pWhere, 0) + sqlite3ExprDup(db, pStep->pWhere, 0), 0, 0 ); break; } @@ -122559,9 +128740,11 @@ static TriggerPrg *codeRowTrigger( pTab->zName )); #ifndef SQLITE_OMIT_TRACE - sqlite3VdbeChangeP4(v, -1, - sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC - ); + if( pTrigger->zName ){ + sqlite3VdbeChangeP4(v, -1, + sqlite3MPrintf(db, "-- TRIGGER %s", pTrigger->zName), P4_DYNAMIC + ); + } #endif /* If one was specified, code the WHEN clause. If it evaluates to false @@ -122589,7 +128772,7 @@ static TriggerPrg *codeRowTrigger( VdbeComment((v, "End: %s.%s", pTrigger->zName, onErrorText(orconf))); transferParseError(pParse, pSubParse); - if( db->mallocFailed==0 ){ + if( db->mallocFailed==0 && pParse->nErr==0 ){ pProgram->aOp = sqlite3VdbeTakeOpArray(v, &pProgram->nOp, &pTop->nMaxArg); } pProgram->nMem = pSubParse->nMem; @@ -122908,7 +129091,10 @@ SQLITE_PRIVATE void sqlite3Update( SrcList *pTabList, /* The table in which we should change things */ ExprList *pChanges, /* Things to be changed */ Expr *pWhere, /* The WHERE clause. May be null */ - int onError /* How to handle constraint errors */ + int onError, /* How to handle constraint errors */ + ExprList *pOrderBy, /* ORDER BY clause. May be null */ + Expr *pLimit, /* LIMIT clause. May be null */ + Upsert *pUpsert /* ON CONFLICT clause, or null */ ){ int i, j; /* Loop counters */ Table *pTab; /* The table to be updated */ @@ -122993,6 +129179,16 @@ SQLITE_PRIVATE void sqlite3Update( # define isView 0 #endif +#ifdef SQLITE_ENABLE_UPDATE_DELETE_LIMIT + if( !isView ){ + pWhere = sqlite3LimitWhere( + pParse, pTabList, pWhere, pOrderBy, pLimit, "UPDATE" + ); + pOrderBy = 0; + pLimit = 0; + } +#endif + if( sqlite3ViewGetColumnNames(pParse, pTab) ){ goto update_cleanup; } @@ -123005,16 +129201,23 @@ SQLITE_PRIVATE void sqlite3Update( ** need to occur right after the database cursor. So go ahead and ** allocate enough space, just in case. */ - pTabList->a[0].iCursor = iBaseCur = iDataCur = pParse->nTab++; + iBaseCur = iDataCur = pParse->nTab++; iIdxCur = iDataCur+1; pPk = HasRowid(pTab) ? 0 : sqlite3PrimaryKeyIndex(pTab); + testcase( pPk!=0 && pPk!=pTab->pIndex ); for(nIdx=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, nIdx++){ - if( IsPrimaryKeyIndex(pIdx) && pPk!=0 ){ + if( pPk==pIdx ){ iDataCur = pParse->nTab; - pTabList->a[0].iCursor = iDataCur; } pParse->nTab++; } + if( pUpsert ){ + /* On an UPSERT, reuse the same cursors already opened by INSERT */ + iDataCur = pUpsert->iDataCur; + iIdxCur = pUpsert->iIdxCur; + pParse->nTab = iBaseCur; + } + pTabList->a[0].iCursor = iDataCur; /* Allocate space for aXRef[], aRegIdx[], and aToOpen[]. ** Initialize aXRef[] and aToOpen[] to their default values. @@ -123031,6 +129234,8 @@ SQLITE_PRIVATE void sqlite3Update( memset(&sNC, 0, sizeof(sNC)); sNC.pParse = pParse; sNC.pSrcList = pTabList; + sNC.uNC.pUpsert = pUpsert; + sNC.ncFlags = NC_UUpsert; /* Resolve the column names in all the expressions of the ** of the UPDATE statement. Also find the column index @@ -123102,7 +129307,7 @@ SQLITE_PRIVATE void sqlite3Update( */ for(j=0, pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext, j++){ int reg; - if( chngKey || hasFK || pIdx->pPartIdxWhere || pIdx==pPk ){ + if( chngKey || hasFK>1 || pIdx->pPartIdxWhere || pIdx==pPk ){ reg = ++pParse->nMem; pParse->nMem += pIdx->nColumn; }else{ @@ -123134,7 +129339,7 @@ SQLITE_PRIVATE void sqlite3Update( v = sqlite3GetVdbe(pParse); if( v==0 ) goto update_cleanup; if( pParse->nested==0 ) sqlite3VdbeCountChanges(v); - sqlite3BeginWriteOperation(pParse, 1, iDb); + sqlite3BeginWriteOperation(pParse, pTrigger || hasFK, iDb); /* Allocate required registers. */ if( !IsVirtual(pTab) ){ @@ -123161,7 +129366,11 @@ SQLITE_PRIVATE void sqlite3Update( */ #if !defined(SQLITE_OMIT_VIEW) && !defined(SQLITE_OMIT_TRIGGER) if( isView ){ - sqlite3MaterializeView(pParse, pTab, pWhere, iDataCur); + sqlite3MaterializeView(pParse, pTab, + pWhere, pOrderBy, pLimit, iDataCur + ); + pOrderBy = 0; + pLimit = 0; } #endif @@ -123181,8 +129390,16 @@ SQLITE_PRIVATE void sqlite3Update( } #endif - /* Initialize the count of updated rows */ - if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab ){ + /* Jump to labelBreak to abandon further processing of this UPDATE */ + labelContinue = labelBreak = sqlite3VdbeMakeLabel(v); + + /* Not an UPSERT. Normal processing. Begin by + ** initialize the count of updated rows */ + if( (db->flags&SQLITE_CountRows)!=0 + && !pParse->pTriggerTab + && !pParse->nested + && pUpsert==0 + ){ regRowCount = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, regRowCount); } @@ -123195,46 +129412,61 @@ SQLITE_PRIVATE void sqlite3Update( iPk = pParse->nMem+1; pParse->nMem += nPk; regKey = ++pParse->nMem; - iEph = pParse->nTab++; - - sqlite3VdbeAddOp2(v, OP_Null, 0, iPk); - addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk); - sqlite3VdbeSetP4KeyInfo(pParse, pPk); - } - - /* Begin the database scan. - ** - ** Do not consider a single-pass strategy for a multi-row update if - ** there are any triggers or foreign keys to process, or rows may - ** be deleted as a result of REPLACE conflict handling. Any of these - ** things might disturb a cursor being used to scan through the table - ** or index, causing a single-pass approach to malfunction. */ - flags = WHERE_ONEPASS_DESIRED|WHERE_SEEK_UNIQ_TABLE; - if( !pParse->nested && !pTrigger && !hasFK && !chngKey && !bReplace ){ - flags |= WHERE_ONEPASS_MULTIROW; - } - pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, flags, iIdxCur); - if( pWInfo==0 ) goto update_cleanup; - - /* A one-pass strategy that might update more than one row may not - ** be used if any column of the index used for the scan is being - ** updated. Otherwise, if there is an index on "b", statements like - ** the following could create an infinite loop: - ** - ** UPDATE t1 SET b=b+1 WHERE b>? - ** - ** Fall back to ONEPASS_OFF if where.c has selected a ONEPASS_MULTI - ** strategy that uses an index for which one or more columns are being - ** updated. */ - eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); - if( eOnePass==ONEPASS_MULTI ){ - int iCur = aiCurOnePass[1]; - if( iCur>=0 && iCur!=iDataCur && aToOpen[iCur-iBaseCur] ){ - eOnePass = ONEPASS_OFF; + if( pUpsert==0 ){ + iEph = pParse->nTab++; + sqlite3VdbeAddOp3(v, OP_Null, 0, iPk, iPk+nPk-1); + addrOpen = sqlite3VdbeAddOp2(v, OP_OpenEphemeral, iEph, nPk); + sqlite3VdbeSetP4KeyInfo(pParse, pPk); } - assert( iCur!=iDataCur || !HasRowid(pTab) ); } + if( pUpsert ){ + /* If this is an UPSERT, then all cursors have already been opened by + ** the outer INSERT and the data cursor should be pointing at the row + ** that is to be updated. So bypass the code that searches for the + ** row(s) to be updated. + */ + pWInfo = 0; + eOnePass = ONEPASS_SINGLE; + sqlite3ExprIfFalse(pParse, pWhere, labelBreak, SQLITE_JUMPIFNULL); + }else{ + /* Begin the database scan. + ** + ** Do not consider a single-pass strategy for a multi-row update if + ** there are any triggers or foreign keys to process, or rows may + ** be deleted as a result of REPLACE conflict handling. Any of these + ** things might disturb a cursor being used to scan through the table + ** or index, causing a single-pass approach to malfunction. */ + flags = WHERE_ONEPASS_DESIRED|WHERE_SEEK_UNIQ_TABLE; + if( !pParse->nested && !pTrigger && !hasFK && !chngKey && !bReplace ){ + flags |= WHERE_ONEPASS_MULTIROW; + } + pWInfo = sqlite3WhereBegin(pParse, pTabList, pWhere, 0, 0, flags, iIdxCur); + if( pWInfo==0 ) goto update_cleanup; + + /* A one-pass strategy that might update more than one row may not + ** be used if any column of the index used for the scan is being + ** updated. Otherwise, if there is an index on "b", statements like + ** the following could create an infinite loop: + ** + ** UPDATE t1 SET b=b+1 WHERE b>? + ** + ** Fall back to ONEPASS_OFF if where.c has selected a ONEPASS_MULTI + ** strategy that uses an index for which one or more columns are being + ** updated. */ + eOnePass = sqlite3WhereOkOnePass(pWInfo, aiCurOnePass); + if( eOnePass!=ONEPASS_SINGLE ){ + sqlite3MultiWrite(pParse); + if( eOnePass==ONEPASS_MULTI ){ + int iCur = aiCurOnePass[1]; + if( iCur>=0 && iCur!=iDataCur && aToOpen[iCur-iBaseCur] ){ + eOnePass = ONEPASS_OFF; + } + assert( iCur!=iDataCur || !HasRowid(pTab) ); + } + } + } + if( HasRowid(pTab) ){ /* Read the rowid of the current row of the WHERE scan. In ONEPASS_OFF ** mode, write the rowid into the FIFO. In either of the one-pass modes, @@ -123254,7 +129486,7 @@ SQLITE_PRIVATE void sqlite3Update( sqlite3ExprCodeGetColumnOfTable(v, pTab, iDataCur,pPk->aiColumn[i],iPk+i); } if( eOnePass ){ - sqlite3VdbeChangeToNoop(v, addrOpen); + if( addrOpen ) sqlite3VdbeChangeToNoop(v, addrOpen); nKey = nPk; regKey = iPk; }else{ @@ -123264,59 +129496,58 @@ SQLITE_PRIVATE void sqlite3Update( } } - if( eOnePass!=ONEPASS_MULTI ){ - sqlite3WhereEnd(pWInfo); - } - - labelBreak = sqlite3VdbeMakeLabel(v); - if( !isView ){ - int addrOnce = 0; - - /* Open every index that needs updating. */ - if( eOnePass!=ONEPASS_OFF ){ - if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0; - if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0; - } - - if( eOnePass==ONEPASS_MULTI && (nIdx-(aiCurOnePass[1]>=0))>0 ){ - addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); + if( pUpsert==0 ){ + if( eOnePass!=ONEPASS_MULTI ){ + sqlite3WhereEnd(pWInfo); } - sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, aToOpen, - 0, 0); - if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); - } - - /* Top of the update loop */ - if( eOnePass!=ONEPASS_OFF ){ - if( !isView && aiCurOnePass[0]!=iDataCur && aiCurOnePass[1]!=iDataCur ){ - assert( pPk ); - sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey, nKey); - VdbeCoverageNeverTaken(v); + + if( !isView ){ + int addrOnce = 0; + + /* Open every index that needs updating. */ + if( eOnePass!=ONEPASS_OFF ){ + if( aiCurOnePass[0]>=0 ) aToOpen[aiCurOnePass[0]-iBaseCur] = 0; + if( aiCurOnePass[1]>=0 ) aToOpen[aiCurOnePass[1]-iBaseCur] = 0; + } + + if( eOnePass==ONEPASS_MULTI && (nIdx-(aiCurOnePass[1]>=0))>0 ){ + addrOnce = sqlite3VdbeAddOp0(v, OP_Once); VdbeCoverage(v); + } + sqlite3OpenTableAndIndices(pParse, pTab, OP_OpenWrite, 0, iBaseCur, + aToOpen, 0, 0); + if( addrOnce ) sqlite3VdbeJumpHere(v, addrOnce); } - if( eOnePass==ONEPASS_SINGLE ){ - labelContinue = labelBreak; - }else{ + + /* Top of the update loop */ + if( eOnePass!=ONEPASS_OFF ){ + if( !isView && aiCurOnePass[0]!=iDataCur && aiCurOnePass[1]!=iDataCur ){ + assert( pPk ); + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelBreak, regKey,nKey); + VdbeCoverageNeverTaken(v); + } + if( eOnePass!=ONEPASS_SINGLE ){ + labelContinue = sqlite3VdbeMakeLabel(v); + } + sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak); + VdbeCoverageIf(v, pPk==0); + VdbeCoverageIf(v, pPk!=0); + }else if( pPk ){ labelContinue = sqlite3VdbeMakeLabel(v); + sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); + addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey); + sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0); + VdbeCoverage(v); + }else{ + labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet,labelBreak, + regOldRowid); + VdbeCoverage(v); + sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); + VdbeCoverage(v); } - sqlite3VdbeAddOp2(v, OP_IsNull, pPk ? regKey : regOldRowid, labelBreak); - VdbeCoverageIf(v, pPk==0); - VdbeCoverageIf(v, pPk!=0); - }else if( pPk ){ - labelContinue = sqlite3VdbeMakeLabel(v); - sqlite3VdbeAddOp2(v, OP_Rewind, iEph, labelBreak); VdbeCoverage(v); - addrTop = sqlite3VdbeAddOp2(v, OP_RowData, iEph, regKey); - sqlite3VdbeAddOp4Int(v, OP_NotFound, iDataCur, labelContinue, regKey, 0); - VdbeCoverage(v); - }else{ - labelContinue = sqlite3VdbeAddOp3(v, OP_RowSetRead, regRowSet, labelBreak, - regOldRowid); - VdbeCoverage(v); - sqlite3VdbeAddOp3(v, OP_NotExists, iDataCur, labelContinue, regOldRowid); - VdbeCoverage(v); } - /* If the record number will change, set register regNewRowid to - ** contain the new value. If the record number is not being modified, + /* If the rowid value will change, set register regNewRowid to + ** contain the new value. If the rowid is not being modified, ** then regNewRowid is the same register as regOldRowid, which is ** already populated. */ assert( chngKey || pTrigger || hasFK || regOldRowid==regNewRowid ); @@ -123380,6 +129611,12 @@ SQLITE_PRIVATE void sqlite3Update( testcase( i==31 ); testcase( i==32 ); sqlite3ExprCodeGetColumnToReg(pParse, pTab, i, iDataCur, regNew+i); + if( tmask & TRIGGER_BEFORE ){ + /* This value will be recomputed in After-BEFORE-trigger-reload-loop + ** below, so make sure that it is not cached and reused. + ** Ticket d85fffd6ffe856092ed8daefa811b1e399706b28. */ + sqlite3ExprCacheRemove(pParse, regNew+i, 1); + } }else{ sqlite3VdbeAddOp2(v, OP_Null, 0, regNew+i); } @@ -123408,10 +129645,14 @@ SQLITE_PRIVATE void sqlite3Update( VdbeCoverage(v); } - /* If it did not delete it, the row-trigger may still have modified + /* After-BEFORE-trigger-reload-loop: + ** If it did not delete it, the BEFORE trigger may still have modified ** some of the columns of the row being updated. Load the values for - ** all columns not modified by the update statement into their - ** registers in case this has happened. + ** all columns not modified by the update statement into their registers + ** in case this has happened. Only unmodified columns are reloaded. + ** The values computed for modified columns use the values before the + ** BEFORE trigger runs. See test case trigger1-18.0 (added 2018-04-26) + ** for an example. */ for(i=0; i<pTab->nCol; i++){ if( aXRef[i]<0 && i!=pTab->iPKey ){ @@ -123427,7 +129668,7 @@ SQLITE_PRIVATE void sqlite3Update( assert( regOldRowid>0 ); sqlite3GenerateConstraintChecks(pParse, pTab, aRegIdx, iDataCur, iIdxCur, regNewRowid, regOldRowid, chngKey, onError, labelContinue, &bReplace, - aXRef); + aXRef, 0); /* Do FK constraint checks. */ if( hasFK ){ @@ -123457,7 +129698,7 @@ SQLITE_PRIVATE void sqlite3Update( assert( regNew==regNewRowid+1 ); #ifdef SQLITE_ENABLE_PREUPDATE_HOOK sqlite3VdbeAddOp3(v, OP_Delete, iDataCur, - OPFLAG_ISUPDATE | ((hasFK || chngKey) ? 0 : OPFLAG_ISNOOP), + OPFLAG_ISUPDATE | ((hasFK>1 || chngKey) ? 0 : OPFLAG_ISNOOP), regNewRowid ); if( eOnePass==ONEPASS_MULTI ){ @@ -123468,7 +129709,7 @@ SQLITE_PRIVATE void sqlite3Update( sqlite3VdbeAppendP4(v, pTab, P4_TABLE); } #else - if( hasFK || chngKey ){ + if( hasFK>1 || chngKey ){ sqlite3VdbeAddOp2(v, OP_Delete, iDataCur, 0); } #endif @@ -123497,7 +129738,7 @@ SQLITE_PRIVATE void sqlite3Update( /* Increment the row counter */ - if( (db->flags & SQLITE_CountRows) && !pParse->pTriggerTab){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_AddImm, regRowCount, 1); } @@ -123524,16 +129765,15 @@ SQLITE_PRIVATE void sqlite3Update( ** maximum rowid counter values recorded while inserting into ** autoincrement tables. */ - if( pParse->nested==0 && pParse->pTriggerTab==0 ){ + if( pParse->nested==0 && pParse->pTriggerTab==0 && pUpsert==0 ){ sqlite3AutoincrementEnd(pParse); } /* - ** Return the number of rows that were changed. If this routine is - ** generating code because of a call to sqlite3NestedParse(), do not - ** invoke the callback function. + ** Return the number of rows that were changed, if we are tracking + ** that information. */ - if( (db->flags&SQLITE_CountRows) && !pParse->pTriggerTab && !pParse->nested ){ + if( regRowCount ){ sqlite3VdbeAddOp2(v, OP_ResultRow, regRowCount, 1); sqlite3VdbeSetNumCols(v, 1); sqlite3VdbeSetColName(v, 0, COLNAME_NAME, "rows updated", SQLITE_STATIC); @@ -123545,6 +129785,10 @@ update_cleanup: sqlite3SrcListDelete(db, pTabList); sqlite3ExprListDelete(db, pChanges); sqlite3ExprDelete(db, pWhere); +#if defined(SQLITE_ENABLE_UPDATE_DELETE_LIMIT) + sqlite3ExprListDelete(db, pOrderBy); + sqlite3ExprDelete(db, pLimit); +#endif return; } /* Make sure "isView" and other macros defined above are undefined. Otherwise @@ -123601,10 +129845,10 @@ static void updateVirtualTable( int regRowid; /* Register for ephem table rowid */ int iCsr = pSrc->a[0].iCursor; /* Cursor used for virtual table scan */ int aDummy[2]; /* Unused arg for sqlite3WhereOkOnePass() */ - int bOnePass; /* True to use onepass strategy */ + int eOnePass; /* True to use onepass strategy */ int addr; /* Address of OP_OpenEphemeral */ - /* Allocate nArg registers to martial the arguments to VUpdate. Then + /* Allocate nArg registers in which to gather the arguments for VUpdate. Then ** create and open the ephemeral table in which the records created from ** these arguments will be temporarily stored. */ assert( v ); @@ -123620,40 +129864,58 @@ static void updateVirtualTable( if( pWInfo==0 ) return; /* Populate the argument registers. */ - sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg); - if( pRowid ){ - sqlite3ExprCode(pParse, pRowid, regArg+1); - }else{ - sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1); - } for(i=0; i<pTab->nCol; i++){ if( aXRef[i]>=0 ){ sqlite3ExprCode(pParse, pChanges->a[aXRef[i]].pExpr, regArg+2+i); }else{ sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, i, regArg+2+i); + sqlite3VdbeChangeP5(v, 1); /* Enable sqlite3_vtab_nochange() */ + } + } + if( HasRowid(pTab) ){ + sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg); + if( pRowid ){ + sqlite3ExprCode(pParse, pRowid, regArg+1); + }else{ + sqlite3VdbeAddOp2(v, OP_Rowid, iCsr, regArg+1); } + }else{ + Index *pPk; /* PRIMARY KEY index */ + i16 iPk; /* PRIMARY KEY column */ + pPk = sqlite3PrimaryKeyIndex(pTab); + assert( pPk!=0 ); + assert( pPk->nKeyCol==1 ); + iPk = pPk->aiColumn[0]; + sqlite3VdbeAddOp3(v, OP_VColumn, iCsr, iPk, regArg); + sqlite3VdbeAddOp2(v, OP_SCopy, regArg+2+iPk, regArg+1); } - bOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy); + eOnePass = sqlite3WhereOkOnePass(pWInfo, aDummy); - if( bOnePass ){ + /* There is no ONEPASS_MULTI on virtual tables */ + assert( eOnePass==ONEPASS_OFF || eOnePass==ONEPASS_SINGLE ); + + if( eOnePass ){ /* If using the onepass strategy, no-op out the OP_OpenEphemeral coded - ** above. Also, if this is a top-level parse (not a trigger), clear the - ** multi-write flag so that the VM does not open a statement journal */ + ** above. */ sqlite3VdbeChangeToNoop(v, addr); - if( sqlite3IsToplevel(pParse) ){ - pParse->isMultiWrite = 0; - } + sqlite3VdbeAddOp1(v, OP_Close, iCsr); }else{ /* Create a record from the argument register contents and insert it into ** the ephemeral table. */ + sqlite3MultiWrite(pParse); sqlite3VdbeAddOp3(v, OP_MakeRecord, regArg, nArg, regRec); +#ifdef SQLITE_DEBUG + /* Signal an assert() within OP_MakeRecord that it is allowed to + ** accept no-change records with serial_type 10 */ + sqlite3VdbeChangeP5(v, OPFLAG_NOCHNG_MAGIC); +#endif sqlite3VdbeAddOp2(v, OP_NewRowid, ephemTab, regRowid); sqlite3VdbeAddOp3(v, OP_Insert, ephemTab, regRec, regRowid); } - if( bOnePass==0 ){ + if( eOnePass==ONEPASS_OFF ){ /* End the virtual table scan */ sqlite3WhereEnd(pWInfo); @@ -123673,7 +129935,7 @@ static void updateVirtualTable( /* End of the ephemeral table scan. Or, if using the onepass strategy, ** jump to here if the scan visited zero rows. */ - if( bOnePass==0 ){ + if( eOnePass==ONEPASS_OFF ){ sqlite3VdbeAddOp2(v, OP_Next, ephemTab, addr+1); VdbeCoverage(v); sqlite3VdbeJumpHere(v, addr); sqlite3VdbeAddOp2(v, OP_Close, ephemTab, 0); @@ -123684,6 +129946,259 @@ static void updateVirtualTable( #endif /* SQLITE_OMIT_VIRTUALTABLE */ /************** End of update.c **********************************************/ +/************** Begin file upsert.c ******************************************/ +/* +** 2018-04-12 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** This file contains code to implement various aspects of UPSERT +** processing and handling of the Upsert object. +*/ +/* #include "sqliteInt.h" */ + +#ifndef SQLITE_OMIT_UPSERT +/* +** Free a list of Upsert objects +*/ +SQLITE_PRIVATE void sqlite3UpsertDelete(sqlite3 *db, Upsert *p){ + if( p ){ + sqlite3ExprListDelete(db, p->pUpsertTarget); + sqlite3ExprDelete(db, p->pUpsertTargetWhere); + sqlite3ExprListDelete(db, p->pUpsertSet); + sqlite3ExprDelete(db, p->pUpsertWhere); + sqlite3DbFree(db, p); + } +} + +/* +** Duplicate an Upsert object. +*/ +SQLITE_PRIVATE Upsert *sqlite3UpsertDup(sqlite3 *db, Upsert *p){ + if( p==0 ) return 0; + return sqlite3UpsertNew(db, + sqlite3ExprListDup(db, p->pUpsertTarget, 0), + sqlite3ExprDup(db, p->pUpsertTargetWhere, 0), + sqlite3ExprListDup(db, p->pUpsertSet, 0), + sqlite3ExprDup(db, p->pUpsertWhere, 0) + ); +} + +/* +** Create a new Upsert object. +*/ +SQLITE_PRIVATE Upsert *sqlite3UpsertNew( + sqlite3 *db, /* Determines which memory allocator to use */ + ExprList *pTarget, /* Target argument to ON CONFLICT, or NULL */ + Expr *pTargetWhere, /* Optional WHERE clause on the target */ + ExprList *pSet, /* UPDATE columns, or NULL for a DO NOTHING */ + Expr *pWhere /* WHERE clause for the ON CONFLICT UPDATE */ +){ + Upsert *pNew; + pNew = sqlite3DbMallocRaw(db, sizeof(Upsert)); + if( pNew==0 ){ + sqlite3ExprListDelete(db, pTarget); + sqlite3ExprDelete(db, pTargetWhere); + sqlite3ExprListDelete(db, pSet); + sqlite3ExprDelete(db, pWhere); + return 0; + }else{ + pNew->pUpsertTarget = pTarget; + pNew->pUpsertTargetWhere = pTargetWhere; + pNew->pUpsertSet = pSet; + pNew->pUpsertWhere = pWhere; + pNew->pUpsertIdx = 0; + } + return pNew; +} + +/* +** Analyze the ON CONFLICT clause described by pUpsert. Resolve all +** symbols in the conflict-target. +** +** Return SQLITE_OK if everything works, or an error code is something +** is wrong. +*/ +SQLITE_PRIVATE int sqlite3UpsertAnalyzeTarget( + Parse *pParse, /* The parsing context */ + SrcList *pTabList, /* Table into which we are inserting */ + Upsert *pUpsert /* The ON CONFLICT clauses */ +){ + Table *pTab; /* That table into which we are inserting */ + int rc; /* Result code */ + int iCursor; /* Cursor used by pTab */ + Index *pIdx; /* One of the indexes of pTab */ + ExprList *pTarget; /* The conflict-target clause */ + Expr *pTerm; /* One term of the conflict-target clause */ + NameContext sNC; /* Context for resolving symbolic names */ + Expr sCol[2]; /* Index column converted into an Expr */ + + assert( pTabList->nSrc==1 ); + assert( pTabList->a[0].pTab!=0 ); + assert( pUpsert!=0 ); + assert( pUpsert->pUpsertTarget!=0 ); + + /* Resolve all symbolic names in the conflict-target clause, which + ** includes both the list of columns and the optional partial-index + ** WHERE clause. + */ + memset(&sNC, 0, sizeof(sNC)); + sNC.pParse = pParse; + sNC.pSrcList = pTabList; + rc = sqlite3ResolveExprListNames(&sNC, pUpsert->pUpsertTarget); + if( rc ) return rc; + rc = sqlite3ResolveExprNames(&sNC, pUpsert->pUpsertTargetWhere); + if( rc ) return rc; + + /* Check to see if the conflict target matches the rowid. */ + pTab = pTabList->a[0].pTab; + pTarget = pUpsert->pUpsertTarget; + iCursor = pTabList->a[0].iCursor; + if( HasRowid(pTab) + && pTarget->nExpr==1 + && (pTerm = pTarget->a[0].pExpr)->op==TK_COLUMN + && pTerm->iColumn==XN_ROWID + ){ + /* The conflict-target is the rowid of the primary table */ + assert( pUpsert->pUpsertIdx==0 ); + return SQLITE_OK; + } + + /* Initialize sCol[0..1] to be an expression parse tree for a + ** single column of an index. The sCol[0] node will be the TK_COLLATE + ** operator and sCol[1] will be the TK_COLUMN operator. Code below + ** will populate the specific collation and column number values + ** prior to comparing against the conflict-target expression. + */ + memset(sCol, 0, sizeof(sCol)); + sCol[0].op = TK_COLLATE; + sCol[0].pLeft = &sCol[1]; + sCol[1].op = TK_COLUMN; + sCol[1].iTable = pTabList->a[0].iCursor; + + /* Check for matches against other indexes */ + for(pIdx=pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + int ii, jj, nn; + if( !IsUniqueIndex(pIdx) ) continue; + if( pTarget->nExpr!=pIdx->nKeyCol ) continue; + if( pIdx->pPartIdxWhere ){ + if( pUpsert->pUpsertTargetWhere==0 ) continue; + if( sqlite3ExprCompare(pParse, pUpsert->pUpsertTargetWhere, + pIdx->pPartIdxWhere, iCursor)!=0 ){ + continue; + } + } + nn = pIdx->nKeyCol; + for(ii=0; ii<nn; ii++){ + Expr *pExpr; + sCol[0].u.zToken = (char*)pIdx->azColl[ii]; + if( pIdx->aiColumn[ii]==XN_EXPR ){ + assert( pIdx->aColExpr!=0 ); + assert( pIdx->aColExpr->nExpr>ii ); + pExpr = pIdx->aColExpr->a[ii].pExpr; + if( pExpr->op!=TK_COLLATE ){ + sCol[0].pLeft = pExpr; + pExpr = &sCol[0]; + } + }else{ + sCol[0].pLeft = &sCol[1]; + sCol[1].iColumn = pIdx->aiColumn[ii]; + pExpr = &sCol[0]; + } + for(jj=0; jj<nn; jj++){ + if( sqlite3ExprCompare(pParse, pTarget->a[jj].pExpr, pExpr,iCursor)<2 ){ + break; /* Column ii of the index matches column jj of target */ + } + } + if( jj>=nn ){ + /* The target contains no match for column jj of the index */ + break; + } + } + if( ii<nn ){ + /* Column ii of the index did not match any term of the conflict target. + ** Continue the search with the next index. */ + continue; + } + pUpsert->pUpsertIdx = pIdx; + return SQLITE_OK; + } + sqlite3ErrorMsg(pParse, "ON CONFLICT clause does not match any " + "PRIMARY KEY or UNIQUE constraint"); + return SQLITE_ERROR; +} + +/* +** Generate bytecode that does an UPDATE as part of an upsert. +** +** If pIdx is NULL, then the UNIQUE constraint that failed was the IPK. +** In this case parameter iCur is a cursor open on the table b-tree that +** currently points to the conflicting table row. Otherwise, if pIdx +** is not NULL, then pIdx is the constraint that failed and iCur is a +** cursor points to the conflicting row. +*/ +SQLITE_PRIVATE void sqlite3UpsertDoUpdate( + Parse *pParse, /* The parsing and code-generating context */ + Upsert *pUpsert, /* The ON CONFLICT clause for the upsert */ + Table *pTab, /* The table being updated */ + Index *pIdx, /* The UNIQUE constraint that failed */ + int iCur /* Cursor for pIdx (or pTab if pIdx==NULL) */ +){ + Vdbe *v = pParse->pVdbe; + sqlite3 *db = pParse->db; + SrcList *pSrc; /* FROM clause for the UPDATE */ + int iDataCur = pUpsert->iDataCur; + + assert( v!=0 ); + VdbeNoopComment((v, "Begin DO UPDATE of UPSERT")); + if( pIdx && iCur!=iDataCur ){ + if( HasRowid(pTab) ){ + int regRowid = sqlite3GetTempReg(pParse); + sqlite3VdbeAddOp2(v, OP_IdxRowid, iCur, regRowid); + sqlite3VdbeAddOp3(v, OP_SeekRowid, iDataCur, 0, regRowid); + VdbeCoverage(v); + sqlite3ReleaseTempReg(pParse, regRowid); + }else{ + Index *pPk = sqlite3PrimaryKeyIndex(pTab); + int nPk = pPk->nKeyCol; + int iPk = pParse->nMem+1; + int i; + pParse->nMem += nPk; + for(i=0; i<nPk; i++){ + int k; + assert( pPk->aiColumn[i]>=0 ); + k = sqlite3ColumnOfIndex(pIdx, pPk->aiColumn[i]); + sqlite3VdbeAddOp3(v, OP_Column, iCur, k, iPk+i); + VdbeComment((v, "%s.%s", pIdx->zName, + pTab->aCol[pPk->aiColumn[i]].zName)); + } + sqlite3VdbeVerifyAbortable(v, OE_Abort); + i = sqlite3VdbeAddOp4Int(v, OP_Found, iDataCur, 0, iPk, nPk); + VdbeCoverage(v); + sqlite3VdbeAddOp4(v, OP_Halt, SQLITE_CORRUPT, OE_Abort, 0, + "corrupt database", P4_STATIC); + sqlite3VdbeJumpHere(v, i); + } + } + /* pUpsert does not own pUpsertSrc - the outer INSERT statement does. So + ** we have to make a copy before passing it down into sqlite3Update() */ + pSrc = sqlite3SrcListDup(db, pUpsert->pUpsertSrc, 0); + sqlite3Update(pParse, pSrc, pUpsert->pUpsertSet, + pUpsert->pUpsertWhere, OE_Abort, 0, 0, pUpsert); + pUpsert->pUpsertSet = 0; /* Will have been deleted by sqlite3Update() */ + pUpsert->pUpsertWhere = 0; /* Will have been deleted by sqlite3Update() */ + VdbeNoopComment((v, "End DO UPDATE of UPSERT")); +} + +#endif /* SQLITE_OMIT_UPSERT */ + +/************** End of upsert.c **********************************************/ /************** Begin file vacuum.c ******************************************/ /* ** 2003 April 6 @@ -123726,8 +130241,14 @@ static int execSql(sqlite3 *db, char **pzErrMsg, const char *zSql){ while( SQLITE_ROW==(rc = sqlite3_step(pStmt)) ){ const char *zSubSql = (const char*)sqlite3_column_text(pStmt,0); assert( sqlite3_strnicmp(zSql,"SELECT",6)==0 ); - if( zSubSql ){ - assert( zSubSql[0]!='S' ); + /* The secondary SQL must be one of CREATE TABLE, CREATE INDEX, + ** or INSERT. Historically there have been attacks that first + ** corrupt the sqlite_master.sql field with other kinds of statements + ** then run VACUUM to get those statements to execute at inappropriate + ** times. */ + if( zSubSql + && (strncmp(zSubSql,"CRE",3)==0 || strncmp(zSubSql,"INS",3)==0) + ){ rc = execSql(db, pzErrMsg, zSubSql); if( rc!=SQLITE_OK ) break; } @@ -123785,8 +130306,25 @@ static int execSqlF(sqlite3 *db, char **pzErrMsg, const char *zSql, ...){ */ SQLITE_PRIVATE void sqlite3Vacuum(Parse *pParse, Token *pNm){ Vdbe *v = sqlite3GetVdbe(pParse); - int iDb = pNm ? sqlite3TwoPartName(pParse, pNm, pNm, &pNm) : 0; - if( v && (iDb>=2 || iDb==0) ){ + int iDb = 0; + if( v==0 ) return; + if( pNm ){ +#ifndef SQLITE_BUG_COMPATIBLE_20160819 + /* Default behavior: Report an error if the argument to VACUUM is + ** not recognized */ + iDb = sqlite3TwoPartName(pParse, pNm, pNm, &pNm); + if( iDb<0 ) return; +#else + /* When SQLITE_BUG_COMPATIBLE_20160819 is defined, unrecognized arguments + ** to VACUUM are silently ignored. This is a back-out of a bug fix that + ** occurred on 2016-08-19 (https://www.sqlite.org/src/info/083f9e6270). + ** The buggy behavior is required for binary compatibility with some + ** legacy applications. */ + iDb = sqlite3FindDb(pParse->db, pNm); + if( iDb<0 ) iDb = 0; +#endif + } + if( iDb!=1 ){ sqlite3VdbeAddOp1(v, OP_Vacuum, iDb); sqlite3VdbeUsesBtree(v, iDb); } @@ -123800,7 +130338,8 @@ SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){ int rc = SQLITE_OK; /* Return code from service routines */ Btree *pMain; /* The database being vacuumed */ Btree *pTemp; /* The temporary database we vacuum into */ - int saved_flags; /* Saved value of the db->flags */ + u16 saved_mDbFlags; /* Saved value of db->mDbFlags */ + u32 saved_flags; /* Saved value of db->flags */ int saved_nChange; /* Saved value of db->nChange */ int saved_nTotalChange; /* Saved value of db->nTotalChange */ u8 saved_mTrace; /* Saved trace settings */ @@ -123823,11 +130362,12 @@ SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){ ** restored before returning. Then set the writable-schema flag, and ** disable CHECK and foreign key constraints. */ saved_flags = db->flags; + saved_mDbFlags = db->mDbFlags; saved_nChange = db->nChange; saved_nTotalChange = db->nTotalChange; saved_mTrace = db->mTrace; - db->flags |= (SQLITE_WriteSchema | SQLITE_IgnoreChecks - | SQLITE_PreferBuiltin | SQLITE_Vacuum); + db->flags |= SQLITE_WriteSchema | SQLITE_IgnoreChecks; + db->mDbFlags |= DBFLAG_PreferBuiltin | DBFLAG_Vacuum; db->flags &= ~(SQLITE_ForeignKeys | SQLITE_ReverseOrder | SQLITE_CountRows); db->mTrace = 0; @@ -123871,7 +130411,7 @@ SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){ extern void sqlite3CodecGetKey(sqlite3*, int, void**, int*); int nKey; char *zKey; - sqlite3CodecGetKey(db, 0, (void**)&zKey, &nKey); + sqlite3CodecGetKey(db, iDb, (void**)&zKey, &nKey); if( nKey ) db->nextPagesize = 0; } #endif @@ -123921,7 +130461,7 @@ SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){ if( rc!=SQLITE_OK ) goto end_of_vacuum; rc = execSqlF(db, pzErrMsg, "SELECT sql FROM \"%w\".sqlite_master" - " WHERE type='index' AND length(sql)>10", + " WHERE type='index'", zDbMain ); if( rc!=SQLITE_OK ) goto end_of_vacuum; @@ -123938,8 +130478,8 @@ SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){ "WHERE type='table'AND coalesce(rootpage,1)>0", zDbMain ); - assert( (db->flags & SQLITE_Vacuum)!=0 ); - db->flags &= ~SQLITE_Vacuum; + assert( (db->mDbFlags & DBFLAG_Vacuum)!=0 ); + db->mDbFlags &= ~DBFLAG_Vacuum; if( rc!=SQLITE_OK ) goto end_of_vacuum; /* Copy the triggers, views, and virtual tables from the main database @@ -124007,6 +130547,7 @@ SQLITE_PRIVATE int sqlite3RunVacuum(char **pzErrMsg, sqlite3 *db, int iDb){ end_of_vacuum: /* Restore the original value of db->flags */ db->init.iDb = 0; + db->mDbFlags = saved_mDbFlags; db->flags = saved_flags; db->nChange = saved_nChange; db->nTotalChange = saved_nTotalChange; @@ -124083,8 +130624,10 @@ SQLITE_PRIVATE Module *sqlite3VtabCreateModule( ){ Module *pMod; int nName = sqlite3Strlen30(zName); - pMod = (Module *)sqlite3DbMallocRawNN(db, sizeof(Module) + nName + 1); - if( pMod ){ + pMod = (Module *)sqlite3Malloc(sizeof(Module) + nName + 1); + if( pMod==0 ){ + sqlite3OomFault(db); + }else{ Module *pDel; char *zCopy = (char *)(&pMod[1]); memcpy(zCopy, zName, nName+1); @@ -124380,8 +130923,7 @@ SQLITE_PRIVATE void sqlite3VtabBeginParse( iDb = sqlite3SchemaToIndex(db, pTable->pSchema); assert( iDb>=0 ); - pTable->tabFlags |= TF_Virtual; - pTable->nModuleArg = 0; + assert( pTable->nModuleArg==0 ); addModuleArgument(db, pTable, sqlite3NameFromToken(db, pModuleName)); addModuleArgument(db, pTable, 0); addModuleArgument(db, pTable, sqlite3DbStrDup(db, pTable->zName)); @@ -124560,13 +131102,14 @@ static int vtabCallConstructor( } } - zModuleName = sqlite3MPrintf(db, "%s", pTab->zName); + zModuleName = sqlite3DbStrDup(db, pTab->zName); if( !zModuleName ){ return SQLITE_NOMEM_BKPT; } - pVTable = sqlite3DbMallocZero(db, sizeof(VTable)); + pVTable = sqlite3MallocZero(sizeof(VTable)); if( !pVTable ){ + sqlite3OomFault(db); sqlite3DbFree(db, zModuleName); return SQLITE_NOMEM_BKPT; } @@ -124669,7 +131212,7 @@ SQLITE_PRIVATE int sqlite3VtabCallConnect(Parse *pParse, Table *pTab){ int rc; assert( pTab ); - if( (pTab->tabFlags & TF_Virtual)==0 || sqlite3GetVTable(db, pTab) ){ + if( !IsVirtual(pTab) || sqlite3GetVTable(db, pTab) ){ return SQLITE_OK; } @@ -124686,6 +131229,7 @@ SQLITE_PRIVATE int sqlite3VtabCallConnect(Parse *pParse, Table *pTab){ rc = vtabCallConstructor(db, pTab, pMod, pMod->pModule->xConnect, &zErr); if( rc!=SQLITE_OK ){ sqlite3ErrorMsg(pParse, "%s", zErr); + pParse->rc = rc; } sqlite3DbFree(db, zErr); } @@ -124739,7 +131283,7 @@ SQLITE_PRIVATE int sqlite3VtabCallCreate(sqlite3 *db, int iDb, const char *zTab, const char *zMod; pTab = sqlite3FindTable(db, zTab, db->aDb[iDb].zDbSName); - assert( pTab && (pTab->tabFlags & TF_Virtual)!=0 && !pTab->pVTable ); + assert( pTab && IsVirtual(pTab) && !pTab->pVTable ); /* Locate the required virtual table module */ zMod = pTab->azModuleArg[0]; @@ -124775,10 +131319,10 @@ SQLITE_PRIVATE int sqlite3VtabCallCreate(sqlite3 *db, int iDb, const char *zTab, */ SQLITE_API int sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){ VtabCtx *pCtx; - Parse *pParse; int rc = SQLITE_OK; Table *pTab; char *zErr = 0; + Parse sParse; #ifdef SQLITE_ENABLE_API_ARMOR if( !sqlite3SafetyCheckOk(db) || zCreateTable==0 ){ @@ -124793,57 +131337,57 @@ SQLITE_API int sqlite3_declare_vtab(sqlite3 *db, const char *zCreateTable){ return SQLITE_MISUSE_BKPT; } pTab = pCtx->pTab; - assert( (pTab->tabFlags & TF_Virtual)!=0 ); + assert( IsVirtual(pTab) ); - pParse = sqlite3StackAllocZero(db, sizeof(*pParse)); - if( pParse==0 ){ - rc = SQLITE_NOMEM_BKPT; - }else{ - pParse->declareVtab = 1; - pParse->db = db; - pParse->nQueryLoop = 1; - - if( SQLITE_OK==sqlite3RunParser(pParse, zCreateTable, &zErr) - && pParse->pNewTable - && !db->mallocFailed - && !pParse->pNewTable->pSelect - && (pParse->pNewTable->tabFlags & TF_Virtual)==0 - ){ - if( !pTab->aCol ){ - Table *pNew = pParse->pNewTable; - Index *pIdx; - pTab->aCol = pNew->aCol; - pTab->nCol = pNew->nCol; - pTab->tabFlags |= pNew->tabFlags & (TF_WithoutRowid|TF_NoVisibleRowid); - pNew->nCol = 0; - pNew->aCol = 0; - assert( pTab->pIndex==0 ); - if( !HasRowid(pNew) && pCtx->pVTable->pMod->pModule->xUpdate!=0 ){ - rc = SQLITE_ERROR; - } - pIdx = pNew->pIndex; - if( pIdx ){ - assert( pIdx->pNext==0 ); - pTab->pIndex = pIdx; - pNew->pIndex = 0; - pIdx->pTable = pTab; - } + memset(&sParse, 0, sizeof(sParse)); + sParse.declareVtab = 1; + sParse.db = db; + sParse.nQueryLoop = 1; + if( SQLITE_OK==sqlite3RunParser(&sParse, zCreateTable, &zErr) + && sParse.pNewTable + && !db->mallocFailed + && !sParse.pNewTable->pSelect + && !IsVirtual(sParse.pNewTable) + ){ + if( !pTab->aCol ){ + Table *pNew = sParse.pNewTable; + Index *pIdx; + pTab->aCol = pNew->aCol; + pTab->nCol = pNew->nCol; + pTab->tabFlags |= pNew->tabFlags & (TF_WithoutRowid|TF_NoVisibleRowid); + pNew->nCol = 0; + pNew->aCol = 0; + assert( pTab->pIndex==0 ); + assert( HasRowid(pNew) || sqlite3PrimaryKeyIndex(pNew)!=0 ); + if( !HasRowid(pNew) + && pCtx->pVTable->pMod->pModule->xUpdate!=0 + && sqlite3PrimaryKeyIndex(pNew)->nKeyCol!=1 + ){ + /* WITHOUT ROWID virtual tables must either be read-only (xUpdate==0) + ** or else must have a single-column PRIMARY KEY */ + rc = SQLITE_ERROR; + } + pIdx = pNew->pIndex; + if( pIdx ){ + assert( pIdx->pNext==0 ); + pTab->pIndex = pIdx; + pNew->pIndex = 0; + pIdx->pTable = pTab; } - pCtx->bDeclared = 1; - }else{ - sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); - sqlite3DbFree(db, zErr); - rc = SQLITE_ERROR; - } - pParse->declareVtab = 0; - - if( pParse->pVdbe ){ - sqlite3VdbeFinalize(pParse->pVdbe); } - sqlite3DeleteTable(db, pParse->pNewTable); - sqlite3ParserReset(pParse); - sqlite3StackFree(db, pParse); + pCtx->bDeclared = 1; + }else{ + sqlite3ErrorWithMsg(db, SQLITE_ERROR, (zErr ? "%s" : 0), zErr); + sqlite3DbFree(db, zErr); + rc = SQLITE_ERROR; + } + sParse.declareVtab = 0; + + if( sParse.pVdbe ){ + sqlite3VdbeFinalize(sParse.pVdbe); } + sqlite3DeleteTable(db, sParse.pNewTable); + sqlite3ParserReset(&sParse); assert( (rc&0xff)==rc ); rc = sqlite3ApiExit(db, rc); @@ -125087,16 +131631,13 @@ SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction( void *pArg = 0; FuncDef *pNew; int rc = 0; - char *zLowerName; - unsigned char *z; - /* Check to see the left operand is a column in a virtual table */ if( NEVER(pExpr==0) ) return pDef; if( pExpr->op!=TK_COLUMN ) return pDef; pTab = pExpr->pTab; - if( NEVER(pTab==0) ) return pDef; - if( (pTab->tabFlags & TF_Virtual)==0 ) return pDef; + if( pTab==0 ) return pDef; + if( !IsVirtual(pTab) ) return pDef; pVtab = sqlite3GetVTable(db, pTab)->pVtab; assert( pVtab!=0 ); assert( pVtab->pModule!=0 ); @@ -125104,16 +131645,22 @@ SQLITE_PRIVATE FuncDef *sqlite3VtabOverloadFunction( if( pMod->xFindFunction==0 ) return pDef; /* Call the xFindFunction method on the virtual table implementation - ** to see if the implementation wants to overload this function + ** to see if the implementation wants to overload this function. + ** + ** Though undocumented, we have historically always invoked xFindFunction + ** with an all lower-case function name. Continue in this tradition to + ** avoid any chance of an incompatibility. */ - zLowerName = sqlite3DbStrDup(db, pDef->zName); - if( zLowerName ){ - for(z=(unsigned char*)zLowerName; *z; z++){ - *z = sqlite3UpperToLower[*z]; +#ifdef SQLITE_DEBUG + { + int i; + for(i=0; pDef->zName[i]; i++){ + unsigned char x = (unsigned char)pDef->zName[i]; + assert( x==sqlite3UpperToLower[x] ); } - rc = pMod->xFindFunction(pVtab, nArg, zLowerName, &xSFunc, &pArg); - sqlite3DbFree(db, zLowerName); } +#endif + rc = pMod->xFindFunction(pVtab, nArg, pDef->zName, &xSFunc, &pArg); if( rc==0 ){ return pDef; } @@ -125191,8 +131738,7 @@ SQLITE_PRIVATE int sqlite3VtabEponymousTableInit(Parse *pParse, Module *pMod){ pMod->pEpoTab = pTab; pTab->nTabRef = 1; pTab->pSchema = db->aDb[0].pSchema; - pTab->tabFlags |= TF_Virtual; - pTab->nModuleArg = 0; + assert( pTab->nModuleArg==0 ); pTab->iPKey = -1; addModuleArgument(db, pTab, sqlite3DbStrDup(db, pTab->zName)); addModuleArgument(db, pTab, 0); @@ -125263,7 +131809,7 @@ SQLITE_API int sqlite3_vtab_config(sqlite3 *db, int op, ...){ if( !p ){ rc = SQLITE_MISUSE_BKPT; }else{ - assert( p->pTab==0 || (p->pTab->tabFlags & TF_Virtual)!=0 ); + assert( p->pTab==0 || IsVirtual(p->pTab) ); p->pVTable->bConstraint = (u8)va_arg(ap, int); } break; @@ -125326,7 +131872,7 @@ SQLITE_API int sqlite3_vtab_config(sqlite3 *db, int op, ...){ ** Trace output macros */ #if defined(SQLITE_TEST) || defined(SQLITE_DEBUG) -/***/ int sqlite3WhereTrace; +/***/ extern int sqlite3WhereTrace; #endif #if defined(SQLITE_DEBUG) \ && (defined(SQLITE_TEST) || defined(SQLITE_ENABLE_WHERETRACE)) @@ -125431,6 +131977,7 @@ struct WhereLoop { u16 nEq; /* Number of equality constraints */ u16 nBtm; /* Size of BTM vector */ u16 nTop; /* Size of TOP vector */ + u16 nIdxCol; /* Index column used for ORDER BY */ Index *pIndex; /* Index used, or NULL */ } btree; struct { /* Information for virtual tables */ @@ -125590,6 +132137,7 @@ struct WhereTerm { #define TERM_LIKECOND 0x200 /* Conditionally this LIKE operator term */ #define TERM_LIKE 0x400 /* The original LIKE operator */ #define TERM_IS 0x800 /* Term.pExpr is an IS operator */ +#define TERM_VARSELECT 0x1000 /* Term.pExpr contains a correlated sub-query */ /* ** An instance of the WhereScan object is used as an iterator for locating @@ -125679,6 +132227,7 @@ struct WhereAndInfo { ** no gaps. */ struct WhereMaskSet { + int bVarSelect; /* Used by sqlite3WhereExprUsage() */ int n; /* Number of assigned cursor values */ int ix[BMS]; /* Cursor assigned to each bit */ }; @@ -125702,8 +132251,13 @@ struct WhereLoopBuilder { UnpackedRecord *pRec; /* Probe for stat4 (if required) */ int nRecValid; /* Number of valid fields currently in pRec */ #endif + unsigned int bldFlags; /* SQLITE_BLDF_* flags */ }; +/* Allowed values for WhereLoopBuider.bldFlags */ +#define SQLITE_BLDF_INDEXED 0x0001 /* An index is used */ +#define SQLITE_BLDF_UNIQUE 0x0002 /* All keys of a UNIQUE index used */ + /* ** The WHERE clause processing routine has two halves. The ** first part does the start of the WHERE loop and the second @@ -125718,7 +132272,8 @@ struct WhereInfo { Parse *pParse; /* Parsing and code generating context */ SrcList *pTabList; /* List of tables in the join */ ExprList *pOrderBy; /* The ORDER BY clause or NULL */ - ExprList *pDistinctSet; /* DISTINCT over all these values */ + ExprList *pResultSet; /* Result set of the query */ + Expr *pWhere; /* The complete WHERE clause */ LogEst iLimit; /* LIMIT if wctrlFlags has WHERE_USE_LIMIT */ int aiCurOnePass[2]; /* OP_OpenWrite cursors for the ONEPASS opt */ int iContinue; /* Jump here to continue with next record */ @@ -125765,12 +132320,10 @@ SQLITE_PRIVATE int sqlite3WhereExplainOneScan( Parse *pParse, /* Parse context */ SrcList *pTabList, /* Table list this loop refers to */ WhereLevel *pLevel, /* Scan to write OP_Explain opcode for */ - int iLevel, /* Value for "level" column of output */ - int iFrom, /* Value for "from" column of output */ u16 wctrlFlags /* Flags passed to sqlite3WhereBegin() */ ); #else -# define sqlite3WhereExplainOneScan(u,v,w,x,y,z) 0 +# define sqlite3WhereExplainOneScan(u,v,w,x) 0 #endif /* SQLITE_OMIT_EXPLAIN */ #ifdef SQLITE_ENABLE_STMT_SCANSTATUS SQLITE_PRIVATE void sqlite3WhereAddScanStatus( @@ -125813,7 +132366,6 @@ SQLITE_PRIVATE void sqlite3WhereTabFuncArgs(Parse*, struct SrcList_item*, WhereC ** WO_LE == SQLITE_INDEX_CONSTRAINT_LE ** WO_GT == SQLITE_INDEX_CONSTRAINT_GT ** WO_GE == SQLITE_INDEX_CONSTRAINT_GE -** WO_MATCH == SQLITE_INDEX_CONSTRAINT_MATCH */ #define WO_IN 0x0001 #define WO_EQ 0x0002 @@ -125821,7 +132373,7 @@ SQLITE_PRIVATE void sqlite3WhereTabFuncArgs(Parse*, struct SrcList_item*, WhereC #define WO_LE (WO_EQ<<(TK_LE-TK_EQ)) #define WO_GT (WO_EQ<<(TK_GT-TK_EQ)) #define WO_GE (WO_EQ<<(TK_GE-TK_EQ)) -#define WO_MATCH 0x0040 +#define WO_AUX 0x0040 /* Op useful to virtual tables only */ #define WO_IS 0x0080 #define WO_ISNULL 0x0100 #define WO_OR 0x0200 /* Two or more OR-connected terms */ @@ -125891,23 +132443,23 @@ static void explainAppendTerm( int i; assert( nTerm>=1 ); - if( bAnd ) sqlite3StrAccumAppend(pStr, " AND ", 5); + if( bAnd ) sqlite3_str_append(pStr, " AND ", 5); - if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, "(", 1); for(i=0; i<nTerm; i++){ - if( i ) sqlite3StrAccumAppend(pStr, ",", 1); - sqlite3StrAccumAppendAll(pStr, explainIndexColumnName(pIdx, iTerm+i)); + if( i ) sqlite3_str_append(pStr, ",", 1); + sqlite3_str_appendall(pStr, explainIndexColumnName(pIdx, iTerm+i)); } - if( nTerm>1 ) sqlite3StrAccumAppend(pStr, ")", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, ")", 1); - sqlite3StrAccumAppend(pStr, zOp, 1); + sqlite3_str_append(pStr, zOp, 1); - if( nTerm>1 ) sqlite3StrAccumAppend(pStr, "(", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, "(", 1); for(i=0; i<nTerm; i++){ - if( i ) sqlite3StrAccumAppend(pStr, ",", 1); - sqlite3StrAccumAppend(pStr, "?", 1); + if( i ) sqlite3_str_append(pStr, ",", 1); + sqlite3_str_append(pStr, "?", 1); } - if( nTerm>1 ) sqlite3StrAccumAppend(pStr, ")", 1); + if( nTerm>1 ) sqlite3_str_append(pStr, ")", 1); } /* @@ -125931,11 +132483,11 @@ static void explainIndexRange(StrAccum *pStr, WhereLoop *pLoop){ int i, j; if( nEq==0 && (pLoop->wsFlags&(WHERE_BTM_LIMIT|WHERE_TOP_LIMIT))==0 ) return; - sqlite3StrAccumAppend(pStr, " (", 2); + sqlite3_str_append(pStr, " (", 2); for(i=0; i<nEq; i++){ const char *z = explainIndexColumnName(pIndex, i); - if( i ) sqlite3StrAccumAppend(pStr, " AND ", 5); - sqlite3XPrintf(pStr, i>=nSkip ? "%s=?" : "ANY(%s)", z); + if( i ) sqlite3_str_append(pStr, " AND ", 5); + sqlite3_str_appendf(pStr, i>=nSkip ? "%s=?" : "ANY(%s)", z); } j = i; @@ -125946,7 +132498,7 @@ static void explainIndexRange(StrAccum *pStr, WhereLoop *pLoop){ if( pLoop->wsFlags&WHERE_TOP_LIMIT ){ explainAppendTerm(pStr, pIndex, pLoop->u.btree.nTop, j, i, "<"); } - sqlite3StrAccumAppend(pStr, ")", 1); + sqlite3_str_append(pStr, ")", 1); } /* @@ -125962,19 +132514,16 @@ SQLITE_PRIVATE int sqlite3WhereExplainOneScan( Parse *pParse, /* Parse context */ SrcList *pTabList, /* Table list this loop refers to */ WhereLevel *pLevel, /* Scan to write OP_Explain opcode for */ - int iLevel, /* Value for "level" column of output */ - int iFrom, /* Value for "from" column of output */ u16 wctrlFlags /* Flags passed to sqlite3WhereBegin() */ ){ int ret = 0; #if !defined(SQLITE_DEBUG) && !defined(SQLITE_ENABLE_STMT_SCANSTATUS) - if( pParse->explain==2 ) + if( sqlite3ParseToplevel(pParse)->explain==2 ) #endif { struct SrcList_item *pItem = &pTabList->a[pLevel->iFrom]; Vdbe *v = pParse->pVdbe; /* VM being constructed */ sqlite3 *db = pParse->db; /* Database handle */ - int iId = pParse->iSelectId; /* Select id (left-most output column) */ int isSearch; /* True for a SEARCH. False for SCAN. */ WhereLoop *pLoop; /* The controlling WhereLoop object */ u32 flags; /* Flags that describe this loop */ @@ -125991,15 +132540,15 @@ SQLITE_PRIVATE int sqlite3WhereExplainOneScan( || (wctrlFlags&(WHERE_ORDERBY_MIN|WHERE_ORDERBY_MAX)); sqlite3StrAccumInit(&str, db, zBuf, sizeof(zBuf), SQLITE_MAX_LENGTH); - sqlite3StrAccumAppendAll(&str, isSearch ? "SEARCH" : "SCAN"); + sqlite3_str_appendall(&str, isSearch ? "SEARCH" : "SCAN"); if( pItem->pSelect ){ - sqlite3XPrintf(&str, " SUBQUERY %d", pItem->iSelectId); + sqlite3_str_appendf(&str, " SUBQUERY 0x%p", pItem->pSelect); }else{ - sqlite3XPrintf(&str, " TABLE %s", pItem->zName); + sqlite3_str_appendf(&str, " TABLE %s", pItem->zName); } if( pItem->zAlias ){ - sqlite3XPrintf(&str, " AS %s", pItem->zAlias); + sqlite3_str_appendf(&str, " AS %s", pItem->zAlias); } if( (flags & (WHERE_IPK|WHERE_VIRTUALTABLE))==0 ){ const char *zFmt = 0; @@ -126022,8 +132571,8 @@ SQLITE_PRIVATE int sqlite3WhereExplainOneScan( zFmt = "INDEX %s"; } if( zFmt ){ - sqlite3StrAccumAppend(&str, " USING ", 7); - sqlite3XPrintf(&str, zFmt, pIdx->zName); + sqlite3_str_append(&str, " USING ", 7); + sqlite3_str_appendf(&str, zFmt, pIdx->zName); explainIndexRange(&str, pLoop); } }else if( (flags & WHERE_IPK)!=0 && (flags & WHERE_CONSTRAINT)!=0 ){ @@ -126038,23 +132587,26 @@ SQLITE_PRIVATE int sqlite3WhereExplainOneScan( assert( flags&WHERE_TOP_LIMIT); zRangeOp = "<"; } - sqlite3XPrintf(&str, " USING INTEGER PRIMARY KEY (rowid%s?)",zRangeOp); + sqlite3_str_appendf(&str, + " USING INTEGER PRIMARY KEY (rowid%s?)",zRangeOp); } #ifndef SQLITE_OMIT_VIRTUALTABLE else if( (flags & WHERE_VIRTUALTABLE)!=0 ){ - sqlite3XPrintf(&str, " VIRTUAL TABLE INDEX %d:%s", + sqlite3_str_appendf(&str, " VIRTUAL TABLE INDEX %d:%s", pLoop->u.vtab.idxNum, pLoop->u.vtab.idxStr); } #endif #ifdef SQLITE_EXPLAIN_ESTIMATED_ROWS if( pLoop->nOut>=10 ){ - sqlite3XPrintf(&str, " (~%llu rows)", sqlite3LogEstToInt(pLoop->nOut)); + sqlite3_str_appendf(&str, " (~%llu rows)", + sqlite3LogEstToInt(pLoop->nOut)); }else{ - sqlite3StrAccumAppend(&str, " (~1 row)", 9); + sqlite3_str_append(&str, " (~1 row)", 9); } #endif zMsg = sqlite3StrAccumFinish(&str); - ret = sqlite3VdbeAddOp4(v, OP_Explain, iId, iLevel, iFrom, zMsg,P4_DYNAMIC); + ret = sqlite3VdbeAddOp4(v, OP_Explain, sqlite3VdbeCurrentAddr(v), + pParse->addrExplain, 0, zMsg,P4_DYNAMIC); } return ret; } @@ -126134,8 +132686,8 @@ SQLITE_PRIVATE void sqlite3WhereAddScanStatus( */ static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){ int nLoop = 0; - while( ALWAYS(pTerm!=0) - && (pTerm->wtFlags & TERM_CODED)==0 + assert( pTerm!=0 ); + while( (pTerm->wtFlags & TERM_CODED)==0 && (pLevel->iLeftJoin==0 || ExprHasProperty(pTerm->pExpr, EP_FromJoin)) && (pLevel->notReady & pTerm->prereqAll)==0 ){ @@ -126146,6 +132698,7 @@ static void disableTerm(WhereLevel *pLevel, WhereTerm *pTerm){ } if( pTerm->iParent<0 ) break; pTerm = &pTerm->pWC->a[pTerm->iParent]; + assert( pTerm!=0 ); pTerm->nChild--; if( pTerm->nChild!=0 ) break; nLoop++; @@ -126216,6 +132769,102 @@ static void updateRangeAffinityStr( } } + +/* +** pX is an expression of the form: (vector) IN (SELECT ...) +** In other words, it is a vector IN operator with a SELECT clause on the +** LHS. But not all terms in the vector are indexable and the terms might +** not be in the correct order for indexing. +** +** This routine makes a copy of the input pX expression and then adjusts +** the vector on the LHS with corresponding changes to the SELECT so that +** the vector contains only index terms and those terms are in the correct +** order. The modified IN expression is returned. The caller is responsible +** for deleting the returned expression. +** +** Example: +** +** CREATE TABLE t1(a,b,c,d,e,f); +** CREATE INDEX t1x1 ON t1(e,c); +** SELECT * FROM t1 WHERE (a,b,c,d,e) IN (SELECT v,w,x,y,z FROM t2) +** \_______________________________________/ +** The pX expression +** +** Since only columns e and c can be used with the index, in that order, +** the modified IN expression that is returned will be: +** +** (e,c) IN (SELECT z,x FROM t2) +** +** The reduced pX is different from the original (obviously) and thus is +** only used for indexing, to improve performance. The original unaltered +** IN expression must also be run on each output row for correctness. +*/ +static Expr *removeUnindexableInClauseTerms( + Parse *pParse, /* The parsing context */ + int iEq, /* Look at loop terms starting here */ + WhereLoop *pLoop, /* The current loop */ + Expr *pX /* The IN expression to be reduced */ +){ + sqlite3 *db = pParse->db; + Expr *pNew = sqlite3ExprDup(db, pX, 0); + if( db->mallocFailed==0 ){ + ExprList *pOrigRhs = pNew->x.pSelect->pEList; /* Original unmodified RHS */ + ExprList *pOrigLhs = pNew->pLeft->x.pList; /* Original unmodified LHS */ + ExprList *pRhs = 0; /* New RHS after modifications */ + ExprList *pLhs = 0; /* New LHS after mods */ + int i; /* Loop counter */ + Select *pSelect; /* Pointer to the SELECT on the RHS */ + + for(i=iEq; i<pLoop->nLTerm; i++){ + if( pLoop->aLTerm[i]->pExpr==pX ){ + int iField = pLoop->aLTerm[i]->iField - 1; + assert( pOrigRhs->a[iField].pExpr!=0 ); + pRhs = sqlite3ExprListAppend(pParse, pRhs, pOrigRhs->a[iField].pExpr); + pOrigRhs->a[iField].pExpr = 0; + assert( pOrigLhs->a[iField].pExpr!=0 ); + pLhs = sqlite3ExprListAppend(pParse, pLhs, pOrigLhs->a[iField].pExpr); + pOrigLhs->a[iField].pExpr = 0; + } + } + sqlite3ExprListDelete(db, pOrigRhs); + sqlite3ExprListDelete(db, pOrigLhs); + pNew->pLeft->x.pList = pLhs; + pNew->x.pSelect->pEList = pRhs; + if( pLhs && pLhs->nExpr==1 ){ + /* Take care here not to generate a TK_VECTOR containing only a + ** single value. Since the parser never creates such a vector, some + ** of the subroutines do not handle this case. */ + Expr *p = pLhs->a[0].pExpr; + pLhs->a[0].pExpr = 0; + sqlite3ExprDelete(db, pNew->pLeft); + pNew->pLeft = p; + } + pSelect = pNew->x.pSelect; + if( pSelect->pOrderBy ){ + /* If the SELECT statement has an ORDER BY clause, zero the + ** iOrderByCol variables. These are set to non-zero when an + ** ORDER BY term exactly matches one of the terms of the + ** result-set. Since the result-set of the SELECT statement may + ** have been modified or reordered, these variables are no longer + ** set correctly. Since setting them is just an optimization, + ** it's easiest just to zero them here. */ + ExprList *pOrderBy = pSelect->pOrderBy; + for(i=0; i<pOrderBy->nExpr; i++){ + pOrderBy->a[i].u.x.iOrderByCol = 0; + } + } + +#if 0 + printf("For indexing, change the IN expr:\n"); + sqlite3TreeViewExpr(0, pX, 0); + printf("Into:\n"); + sqlite3TreeViewExpr(0, pNew, 0); +#endif + } + return pNew; +} + + /* ** Generate code for a single equality term of the WHERE clause. An equality ** term can be either X=expr or X IN (...). pTerm is the term to be @@ -126278,68 +132927,23 @@ static int codeEqualityTerm( } } for(i=iEq;i<pLoop->nLTerm; i++){ - if( ALWAYS(pLoop->aLTerm[i]) && pLoop->aLTerm[i]->pExpr==pX ) nEq++; + assert( pLoop->aLTerm[i]!=0 ); + if( pLoop->aLTerm[i]->pExpr==pX ) nEq++; } if( (pX->flags & EP_xIsSelect)==0 || pX->x.pSelect->pEList->nExpr==1 ){ eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, 0); }else{ - Select *pSelect = pX->x.pSelect; sqlite3 *db = pParse->db; - u16 savedDbOptFlags = db->dbOptFlags; - ExprList *pOrigRhs = pSelect->pEList; - ExprList *pOrigLhs = pX->pLeft->x.pList; - ExprList *pRhs = 0; /* New Select.pEList for RHS */ - ExprList *pLhs = 0; /* New pX->pLeft vector */ - - for(i=iEq;i<pLoop->nLTerm; i++){ - if( pLoop->aLTerm[i]->pExpr==pX ){ - int iField = pLoop->aLTerm[i]->iField - 1; - Expr *pNewRhs = sqlite3ExprDup(db, pOrigRhs->a[iField].pExpr, 0); - Expr *pNewLhs = sqlite3ExprDup(db, pOrigLhs->a[iField].pExpr, 0); + pX = removeUnindexableInClauseTerms(pParse, iEq, pLoop, pX); - pRhs = sqlite3ExprListAppend(pParse, pRhs, pNewRhs); - pLhs = sqlite3ExprListAppend(pParse, pLhs, pNewLhs); - } - } if( !db->mallocFailed ){ - Expr *pLeft = pX->pLeft; - - if( pSelect->pOrderBy ){ - /* If the SELECT statement has an ORDER BY clause, zero the - ** iOrderByCol variables. These are set to non-zero when an - ** ORDER BY term exactly matches one of the terms of the - ** result-set. Since the result-set of the SELECT statement may - ** have been modified or reordered, these variables are no longer - ** set correctly. Since setting them is just an optimization, - ** it's easiest just to zero them here. */ - ExprList *pOrderBy = pSelect->pOrderBy; - for(i=0; i<pOrderBy->nExpr; i++){ - pOrderBy->a[i].u.x.iOrderByCol = 0; - } - } - - /* Take care here not to generate a TK_VECTOR containing only a - ** single value. Since the parser never creates such a vector, some - ** of the subroutines do not handle this case. */ - if( pLhs->nExpr==1 ){ - pX->pLeft = pLhs->a[0].pExpr; - }else{ - pLeft->x.pList = pLhs; - aiMap = (int*)sqlite3DbMallocZero(pParse->db, sizeof(int) * nEq); - testcase( aiMap==0 ); - } - pSelect->pEList = pRhs; - db->dbOptFlags |= SQLITE_QueryFlattener; + aiMap = (int*)sqlite3DbMallocZero(pParse->db, sizeof(int)*nEq); eType = sqlite3FindInIndex(pParse, pX, IN_INDEX_LOOP, 0, aiMap); - db->dbOptFlags = savedDbOptFlags; - testcase( aiMap!=0 && aiMap[0]!=0 ); - pSelect->pEList = pOrigRhs; - pLeft->x.pList = pOrigLhs; - pX->pLeft = pLeft; + pTerm->pExpr->iTable = pX->iTable; } - sqlite3ExprListDelete(pParse->db, pLhs); - sqlite3ExprListDelete(pParse->db, pRhs); + sqlite3ExprDelete(db, pX); + pX = pTerm->pExpr; } if( eType==IN_INDEX_INDEX_DESC ){ @@ -126634,7 +133238,7 @@ static int codeCursorHintIsOrFunction(Walker *pWalker, Expr *pExpr){ pWalker->eCode = 1; }else if( pExpr->op==TK_FUNCTION ){ int d1; - char d2[3]; + char d2[4]; if( 0==sqlite3IsLikeFunction(pWalker->pParse->db, pExpr, &d1, d2) ){ pWalker->eCode = 1; } @@ -126806,10 +133410,10 @@ static void codeCursorHint( ** ** Normally, this is just: ** -** OP_Seek $iCur $iRowid +** OP_DeferredSeek $iCur $iRowid ** ** However, if the scan currently being coded is a branch of an OR-loop and -** the statement currently being coded is a SELECT, then P3 of the OP_Seek +** the statement currently being coded is a SELECT, then P3 of OP_DeferredSeek ** is set to iIdxCur and P4 is set to point to an array of integers ** containing one entry for each column of the table cursor iCur is open ** on. For each table column, if the column is the i'th column of the @@ -126828,7 +133432,7 @@ static void codeDeferredSeek( assert( iIdxCur>0 ); assert( pIdx->aiColumn[pIdx->nColumn-1]==-1 ); - sqlite3VdbeAddOp3(v, OP_Seek, iIdxCur, 0, iCur); + sqlite3VdbeAddOp3(v, OP_DeferredSeek, iIdxCur, 0, iCur); if( (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE) && DbMaskAllZero(sqlite3ParseToplevel(pParse)->writeMask) ){ @@ -126857,7 +133461,7 @@ static void codeDeferredSeek( */ static void codeExprOrVector(Parse *pParse, Expr *p, int iReg, int nReg){ assert( nReg>0 ); - if( sqlite3ExprIsVector(p) ){ + if( p && sqlite3ExprIsVector(p) ){ #ifndef SQLITE_OMIT_SUBQUERY if( (p->flags & EP_xIsSelect) ){ Vdbe *v = pParse->pVdbe; @@ -126879,6 +133483,69 @@ static void codeExprOrVector(Parse *pParse, Expr *p, int iReg, int nReg){ } } +/* An instance of the IdxExprTrans object carries information about a +** mapping from an expression on table columns into a column in an index +** down through the Walker. +*/ +typedef struct IdxExprTrans { + Expr *pIdxExpr; /* The index expression */ + int iTabCur; /* The cursor of the corresponding table */ + int iIdxCur; /* The cursor for the index */ + int iIdxCol; /* The column for the index */ +} IdxExprTrans; + +/* The walker node callback used to transform matching expressions into +** a reference to an index column for an index on an expression. +** +** If pExpr matches, then transform it into a reference to the index column +** that contains the value of pExpr. +*/ +static int whereIndexExprTransNode(Walker *p, Expr *pExpr){ + IdxExprTrans *pX = p->u.pIdxTrans; + if( sqlite3ExprCompare(0, pExpr, pX->pIdxExpr, pX->iTabCur)==0 ){ + pExpr->op = TK_COLUMN; + pExpr->iTable = pX->iIdxCur; + pExpr->iColumn = pX->iIdxCol; + pExpr->pTab = 0; + return WRC_Prune; + }else{ + return WRC_Continue; + } +} + +/* +** For an indexes on expression X, locate every instance of expression X +** in pExpr and change that subexpression into a reference to the appropriate +** column of the index. +*/ +static void whereIndexExprTrans( + Index *pIdx, /* The Index */ + int iTabCur, /* Cursor of the table that is being indexed */ + int iIdxCur, /* Cursor of the index itself */ + WhereInfo *pWInfo /* Transform expressions in this WHERE clause */ +){ + int iIdxCol; /* Column number of the index */ + ExprList *aColExpr; /* Expressions that are indexed */ + Walker w; + IdxExprTrans x; + aColExpr = pIdx->aColExpr; + if( aColExpr==0 ) return; /* Not an index on expressions */ + memset(&w, 0, sizeof(w)); + w.xExprCallback = whereIndexExprTransNode; + w.u.pIdxTrans = &x; + x.iTabCur = iTabCur; + x.iIdxCur = iIdxCur; + for(iIdxCol=0; iIdxCol<aColExpr->nExpr; iIdxCol++){ + if( pIdx->aiColumn[iIdxCol]!=XN_EXPR ) continue; + assert( aColExpr->a[iIdxCol].pExpr!=0 ); + x.iIdxCol = iIdxCol; + x.pIdxExpr = aColExpr->a[iIdxCol].pExpr; + sqlite3WalkExpr(&w, pWInfo->pWhere); + sqlite3WalkExprList(&w, pWInfo->pOrderBy); + sqlite3WalkExprList(&w, pWInfo->pResultSet); + } +} + /* ** Generate code for the start of the iLevel-th loop in the WHERE clause ** implementation described by pWInfo. @@ -126902,9 +133569,12 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( Vdbe *v; /* The prepared stmt under constructions */ struct SrcList_item *pTabItem; /* FROM clause term being coded */ int addrBrk; /* Jump here to break out of the loop */ + int addrHalt; /* addrBrk for the outermost loop */ int addrCont; /* Jump here to continue with next cycle */ int iRowidReg = 0; /* Rowid is stored in this register, if not zero */ int iReleaseReg = 0; /* Temp register to free before returning */ + Index *pIdx = 0; /* Index used by loop (if any) */ + int iLoop; /* Iteration of constraint generator loop */ pParse = pWInfo->pParse; v = pParse->pVdbe; @@ -126937,12 +133607,20 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( ** initialize a memory cell that records if this table matches any ** row of the left table of the join. */ + assert( (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE) + || pLevel->iFrom>0 || (pTabItem[0].fg.jointype & JT_LEFT)==0 + ); if( pLevel->iFrom>0 && (pTabItem[0].fg.jointype & JT_LEFT)!=0 ){ pLevel->iLeftJoin = ++pParse->nMem; sqlite3VdbeAddOp2(v, OP_Integer, 0, pLevel->iLeftJoin); VdbeComment((v, "init LEFT JOIN no-match flag")); } + /* Compute a safe address to jump to if we discover that the table for + ** this loop is empty and can never contribute content. */ + for(j=iLevel; j>0 && pWInfo->a[j].iLeftJoin==0; j--){} + addrHalt = pWInfo->a[j].addrBrk; + /* Special case of a FROM clause subquery implemented as a co-routine */ if( pTabItem->fg.viaCoroutine ){ int regYield = pTabItem->regReturn; @@ -127112,7 +133790,15 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( if( sqlite3ExprIsVector(pX->pRight) ){ r1 = rTemp = sqlite3GetTempReg(pParse); codeExprOrVector(pParse, pX->pRight, r1, 1); - op = aMoveOp[(pX->op - TK_GT) | 0x0001]; + testcase( pX->op==TK_GT ); + testcase( pX->op==TK_GE ); + testcase( pX->op==TK_LT ); + testcase( pX->op==TK_LE ); + op = aMoveOp[((pX->op - TK_GT - 1) & 0x3) | 0x1]; + assert( pX->op!=TK_GT || op==OP_SeekGE ); + assert( pX->op!=TK_GE || op==OP_SeekGE ); + assert( pX->op!=TK_LT || op==OP_SeekLE ); + assert( pX->op!=TK_LE || op==OP_SeekLE ); }else{ r1 = sqlite3ExprCodeTemp(pParse, pX->pRight, &rTemp); disableTerm(pLevel, pStart); @@ -127127,7 +133813,7 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( sqlite3ExprCacheAffinityChange(pParse, r1, 1); sqlite3ReleaseTempReg(pParse, rTemp); }else{ - sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrBrk); + sqlite3VdbeAddOp2(v, bRev ? OP_Last : OP_Rewind, iCur, addrHalt); VdbeCoverageIf(v, bRev==0); VdbeCoverageIf(v, bRev!=0); } @@ -127225,7 +133911,6 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( int endEq; /* True if range end uses ==, >= or <= */ int start_constraints; /* Start of range is constrained */ int nConstraint; /* Number of constraint terms */ - Index *pIdx; /* The index we will be using */ int iIdxCur; /* The VDBE cursor for the index */ int nExtraReg = 0; /* Number of extra registers needed */ int op; /* Instruction opcode */ @@ -127408,6 +134093,7 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( } }else if( bStopAtNull ){ sqlite3VdbeAddOp2(v, OP_Null, 0, regBase+nEq); + sqlite3ExprCacheRemove(pParse, regBase+nEq, 1); endEq = 0; nConstraint++; } @@ -127454,6 +134140,20 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( iRowidReg, pPk->nKeyCol); VdbeCoverage(v); } + /* If pIdx is an index on one or more expressions, then look through + ** all the expressions in pWInfo and try to transform matching expressions + ** into reference to index columns. + ** + ** Do not do this for the RHS of a LEFT JOIN. This is because the + ** expression may be evaluated after OP_NullRow has been executed on + ** the cursor. In this case it is important to do the full evaluation, + ** as the result of the expression may not be NULL, even if all table + ** column values are. https://www.sqlite.org/src/info/7fa8049685b50b5a + */ + if( pLevel->iLeftJoin==0 ){ + whereIndexExprTrans(pIdx, iCur, iIdxCur, pWInfo); + } + /* Record the instruction used to terminate the loop. */ if( pLoop->wsFlags & WHERE_ONEROW ){ pLevel->op = OP_Noop; @@ -127469,6 +134169,7 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( }else{ assert( pLevel->p5==0 ); } + if( omitTable ) pIdx = 0; }else #ifndef SQLITE_OMIT_OR_OPTIMIZATION @@ -127607,7 +134308,6 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( for(iTerm=0; iTerm<pWC->nTerm; iTerm++){ Expr *pExpr = pWC->a[iTerm].pExpr; if( &pWC->a[iTerm] == pTerm ) continue; - if( ExprHasProperty(pExpr, EP_FromJoin) ) continue; testcase( pWC->a[iTerm].wtFlags & TERM_VIRTUAL ); testcase( pWC->a[iTerm].wtFlags & TERM_CODED ); if( (pWC->a[iTerm].wtFlags & (TERM_VIRTUAL|TERM_CODED))!=0 ) continue; @@ -127626,13 +134326,17 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( ** sub-WHERE clause is to to invoke the main loop body as a subroutine. */ wctrlFlags = WHERE_OR_SUBCLAUSE | (pWInfo->wctrlFlags & WHERE_SEEK_TABLE); + ExplainQueryPlan((pParse, 1, "MULTI-INDEX OR")); for(ii=0; ii<pOrWc->nTerm; ii++){ WhereTerm *pOrTerm = &pOrWc->a[ii]; if( pOrTerm->leftCursor==iCur || (pOrTerm->eOperator & WO_AND)!=0 ){ WhereInfo *pSubWInfo; /* Info for single OR-term scan */ Expr *pOrExpr = pOrTerm->pExpr; /* Current OR clause term */ int jmp1 = 0; /* Address of jump operation */ - if( pAndExpr && !ExprHasProperty(pOrExpr, EP_FromJoin) ){ + assert( (pTabItem[0].fg.jointype & JT_LEFT)==0 + || ExprHasProperty(pOrExpr, EP_FromJoin) + ); + if( pAndExpr ){ pAndExpr->pLeft = pOrExpr; pOrExpr = pAndExpr; } @@ -127644,7 +134348,7 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( if( pSubWInfo ){ WhereLoop *pSubLoop; int addrExplain = sqlite3WhereExplainOneScan( - pParse, pOrTab, &pSubWInfo->a[0], iLevel, pLevel->iFrom, 0 + pParse, pOrTab, &pSubWInfo->a[0], 0 ); sqlite3WhereAddScanStatus(v, pOrTab, &pSubWInfo->a[0], addrExplain); @@ -127743,6 +134447,7 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( } } } + ExplainQueryPlanPop(pParse); pLevel->u.pCovidx = pCov; if( pCov ) pLevel->iIdxCur = iCovCur; if( pAndExpr ){ @@ -127773,7 +134478,7 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( codeCursorHint(pTabItem, pWInfo, pLevel, 0); pLevel->op = aStep[bRev]; pLevel->p1 = iCur; - pLevel->p2 = 1 + sqlite3VdbeAddOp2(v, aStart[bRev], iCur, addrBrk); + pLevel->p2 = 1 + sqlite3VdbeAddOp2(v, aStart[bRev], iCur, addrHalt); VdbeCoverageIf(v, bRev==0); VdbeCoverageIf(v, bRev!=0); pLevel->p5 = SQLITE_STMTSTATUS_FULLSCAN_STEP; @@ -127786,43 +134491,76 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( /* Insert code to test every subexpression that can be completely ** computed using the current set of tables. + ** + ** This loop may run between one and three times, depending on the + ** constraints to be generated. The value of stack variable iLoop + ** determines the constraints coded by each iteration, as follows: + ** + ** iLoop==1: Code only expressions that are entirely covered by pIdx. + ** iLoop==2: Code remaining expressions that do not contain correlated + ** sub-queries. + ** iLoop==3: Code all remaining expressions. + ** + ** An effort is made to skip unnecessary iterations of the loop. */ - for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){ - Expr *pE; - int skipLikeAddr = 0; - testcase( pTerm->wtFlags & TERM_VIRTUAL ); - testcase( pTerm->wtFlags & TERM_CODED ); - if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue; - if( (pTerm->prereqAll & pLevel->notReady)!=0 ){ - testcase( pWInfo->untestedTerms==0 - && (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE)!=0 ); - pWInfo->untestedTerms = 1; - continue; - } - pE = pTerm->pExpr; - assert( pE!=0 ); - if( pLevel->iLeftJoin && !ExprHasProperty(pE, EP_FromJoin) ){ - continue; - } - if( pTerm->wtFlags & TERM_LIKECOND ){ - /* If the TERM_LIKECOND flag is set, that means that the range search - ** is sufficient to guarantee that the LIKE operator is true, so we - ** can skip the call to the like(A,B) function. But this only works - ** for strings. So do not skip the call to the function on the pass - ** that compares BLOBs. */ + iLoop = (pIdx ? 1 : 2); + do{ + int iNext = 0; /* Next value for iLoop */ + for(pTerm=pWC->a, j=pWC->nTerm; j>0; j--, pTerm++){ + Expr *pE; + int skipLikeAddr = 0; + testcase( pTerm->wtFlags & TERM_VIRTUAL ); + testcase( pTerm->wtFlags & TERM_CODED ); + if( pTerm->wtFlags & (TERM_VIRTUAL|TERM_CODED) ) continue; + if( (pTerm->prereqAll & pLevel->notReady)!=0 ){ + testcase( pWInfo->untestedTerms==0 + && (pWInfo->wctrlFlags & WHERE_OR_SUBCLAUSE)!=0 ); + pWInfo->untestedTerms = 1; + continue; + } + pE = pTerm->pExpr; + assert( pE!=0 ); + if( (pTabItem->fg.jointype&JT_LEFT) && !ExprHasProperty(pE,EP_FromJoin) ){ + continue; + } + + if( iLoop==1 && !sqlite3ExprCoveredByIndex(pE, pLevel->iTabCur, pIdx) ){ + iNext = 2; + continue; + } + if( iLoop<3 && (pTerm->wtFlags & TERM_VARSELECT) ){ + if( iNext==0 ) iNext = 3; + continue; + } + + if( (pTerm->wtFlags & TERM_LIKECOND)!=0 ){ + /* If the TERM_LIKECOND flag is set, that means that the range search + ** is sufficient to guarantee that the LIKE operator is true, so we + ** can skip the call to the like(A,B) function. But this only works + ** for strings. So do not skip the call to the function on the pass + ** that compares BLOBs. */ #ifdef SQLITE_LIKE_DOESNT_MATCH_BLOBS - continue; + continue; #else - u32 x = pLevel->iLikeRepCntr; - assert( x>0 ); - skipLikeAddr = sqlite3VdbeAddOp1(v, (x&1)? OP_IfNot : OP_If, (int)(x>>1)); - VdbeCoverage(v); + u32 x = pLevel->iLikeRepCntr; + if( x>0 ){ + skipLikeAddr = sqlite3VdbeAddOp1(v, (x&1)?OP_IfNot:OP_If,(int)(x>>1)); + } + VdbeCoverage(v); +#endif + } +#ifdef WHERETRACE_ENABLED /* 0xffff */ + if( sqlite3WhereTrace ){ + VdbeNoopComment((v, "WhereTerm[%d] (%p) priority=%d", + pWC->nTerm-j, pTerm, iLoop)); + } #endif + sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL); + if( skipLikeAddr ) sqlite3VdbeJumpHere(v, skipLikeAddr); + pTerm->wtFlags |= TERM_CODED; } - sqlite3ExprIfFalse(pParse, pE, addrCont, SQLITE_JUMPIFNULL); - if( skipLikeAddr ) sqlite3VdbeJumpHere(v, skipLikeAddr); - pTerm->wtFlags |= TERM_CODED; - } + iLoop = iNext; + }while( iLoop>0 ); /* Insert code to test for implied constraints based on transitivity ** of the "==" operator. @@ -127847,6 +134585,12 @@ SQLITE_PRIVATE Bitmask sqlite3WhereCodeOneLoopStart( WO_EQ|WO_IN|WO_IS, 0); if( pAlt==0 ) continue; if( pAlt->wtFlags & (TERM_CODED) ) continue; + if( (pAlt->eOperator & WO_IN) + && (pAlt->pExpr->flags & EP_xIsSelect) + && (pAlt->pExpr->x.pSelect->pEList->nExpr>1) + ){ + continue; + } testcase( pAlt->eOperator & WO_EQ ); testcase( pAlt->eOperator & WO_IS ); testcase( pAlt->eOperator & WO_IN ); @@ -128079,12 +134823,12 @@ static int isLikeOrGlob( int *pisComplete, /* True if the only wildcard is % in the last character */ int *pnoCase /* True if uppercase is equivalent to lowercase */ ){ - const char *z = 0; /* String on RHS of LIKE operator */ + const u8 *z = 0; /* String on RHS of LIKE operator */ Expr *pRight, *pLeft; /* Right and left size of LIKE operator */ ExprList *pList; /* List of operands to the LIKE operator */ int c; /* One character in z[] */ int cnt; /* Number of non-wildcard prefix characters */ - char wc[3]; /* Wildcard characters */ + char wc[4]; /* Wildcard characters */ sqlite3 *db = pParse->db; /* Database connection */ sqlite3_value *pVal = 0; int op; /* Opcode of pRight */ @@ -128098,41 +134842,75 @@ static int isLikeOrGlob( #endif pList = pExpr->x.pList; pLeft = pList->a[1].pExpr; - if( pLeft->op!=TK_COLUMN - || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT - || IsVirtual(pLeft->pTab) /* Value might be numeric */ - ){ - /* IMP: R-02065-49465 The left-hand side of the LIKE or GLOB operator must - ** be the name of an indexed column with TEXT affinity. */ - return 0; - } - assert( pLeft->iColumn!=(-1) ); /* Because IPK never has AFF_TEXT */ pRight = sqlite3ExprSkipCollate(pList->a[0].pExpr); op = pRight->op; - if( op==TK_VARIABLE ){ + if( op==TK_VARIABLE && (db->flags & SQLITE_EnableQPSG)==0 ){ Vdbe *pReprepare = pParse->pReprepare; int iCol = pRight->iColumn; pVal = sqlite3VdbeGetBoundValue(pReprepare, iCol, SQLITE_AFF_BLOB); if( pVal && sqlite3_value_type(pVal)==SQLITE_TEXT ){ - z = (char *)sqlite3_value_text(pVal); + z = sqlite3_value_text(pVal); } sqlite3VdbeSetVarmask(pParse->pVdbe, iCol); assert( pRight->op==TK_VARIABLE || pRight->op==TK_REGISTER ); }else if( op==TK_STRING ){ - z = pRight->u.zToken; + z = (u8*)pRight->u.zToken; } if( z ){ + + /* If the RHS begins with a digit or a minus sign, then the LHS must + ** be an ordinary column (not a virtual table column) with TEXT affinity. + ** Otherwise the LHS might be numeric and "lhs >= rhs" would be false + ** even though "lhs LIKE rhs" is true. But if the RHS does not start + ** with a digit or '-', then "lhs LIKE rhs" will always be false if + ** the LHS is numeric and so the optimization still works. + */ + if( sqlite3Isdigit(z[0]) || z[0]=='-' ){ + if( pLeft->op!=TK_COLUMN + || sqlite3ExprAffinity(pLeft)!=SQLITE_AFF_TEXT + || IsVirtual(pLeft->pTab) /* Value might be numeric */ + ){ + sqlite3ValueFree(pVal); + return 0; + } + } + + /* Count the number of prefix characters prior to the first wildcard */ cnt = 0; while( (c=z[cnt])!=0 && c!=wc[0] && c!=wc[1] && c!=wc[2] ){ cnt++; + if( c==wc[3] && z[cnt]!=0 ) cnt++; } + + /* The optimization is possible only if (1) the pattern does not begin + ** with a wildcard and if (2) the non-wildcard prefix does not end with + ** an (illegal 0xff) character. The second condition is necessary so + ** that we can increment the prefix key to find an upper bound for the + ** range search. + */ if( cnt!=0 && 255!=(u8)z[cnt-1] ){ Expr *pPrefix; + + /* A "complete" match if the pattern ends with "*" or "%" */ *pisComplete = c==wc[0] && z[cnt+1]==0; - pPrefix = sqlite3Expr(db, TK_STRING, z); - if( pPrefix ) pPrefix->u.zToken[cnt] = 0; + + /* Get the pattern prefix. Remove all escapes from the prefix. */ + pPrefix = sqlite3Expr(db, TK_STRING, (char*)z); + if( pPrefix ){ + int iFrom, iTo; + char *zNew = pPrefix->u.zToken; + zNew[cnt] = 0; + for(iFrom=iTo=0; iFrom<cnt; iFrom++){ + if( zNew[iFrom]==wc[3] ) iFrom++; + zNew[iTo++] = zNew[iFrom]; + } + zNew[iTo] = 0; + } *ppPrefix = pPrefix; + + /* If the RHS pattern is a bound parameter, make arrangements to + ** reprepare the statement when that parameter is rebound */ if( op==TK_VARIABLE ){ Vdbe *v = pParse->pVdbe; sqlite3VdbeSetVarmask(v, pRight->iColumn); @@ -128163,48 +134941,84 @@ static int isLikeOrGlob( #ifndef SQLITE_OMIT_VIRTUALTABLE /* -** Check to see if the given expression is of the form -** -** column OP expr -** -** where OP is one of MATCH, GLOB, LIKE or REGEXP and "column" is a -** column of a virtual table. -** -** If it is then return TRUE. If not, return FALSE. -*/ -static int isMatchOfColumn( +** Check to see if the pExpr expression is a form that needs to be passed +** to the xBestIndex method of virtual tables. Forms of interest include: +** +** Expression Virtual Table Operator +** ----------------------- --------------------------------- +** 1. column MATCH expr SQLITE_INDEX_CONSTRAINT_MATCH +** 2. column GLOB expr SQLITE_INDEX_CONSTRAINT_GLOB +** 3. column LIKE expr SQLITE_INDEX_CONSTRAINT_LIKE +** 4. column REGEXP expr SQLITE_INDEX_CONSTRAINT_REGEXP +** 5. column != expr SQLITE_INDEX_CONSTRAINT_NE +** 6. expr != column SQLITE_INDEX_CONSTRAINT_NE +** 7. column IS NOT expr SQLITE_INDEX_CONSTRAINT_ISNOT +** 8. expr IS NOT column SQLITE_INDEX_CONSTRAINT_ISNOT +** 9. column IS NOT NULL SQLITE_INDEX_CONSTRAINT_ISNOTNULL +** +** In every case, "column" must be a column of a virtual table. If there +** is a match, set *ppLeft to the "column" expression, set *ppRight to the +** "expr" expression (even though in forms (6) and (8) the column is on the +** right and the expression is on the left). Also set *peOp2 to the +** appropriate virtual table operator. The return value is 1 or 2 if there +** is a match. The usual return is 1, but if the RHS is also a column +** of virtual table in forms (5) or (7) then return 2. +** +** If the expression matches none of the patterns above, return 0. +*/ +static int isAuxiliaryVtabOperator( Expr *pExpr, /* Test this expression */ - unsigned char *peOp2 /* OUT: 0 for MATCH, or else an op2 value */ -){ - static const struct Op2 { - const char *zOp; - unsigned char eOp2; - } aOp[] = { - { "match", SQLITE_INDEX_CONSTRAINT_MATCH }, - { "glob", SQLITE_INDEX_CONSTRAINT_GLOB }, - { "like", SQLITE_INDEX_CONSTRAINT_LIKE }, - { "regexp", SQLITE_INDEX_CONSTRAINT_REGEXP } - }; - ExprList *pList; - Expr *pCol; /* Column reference */ - int i; + unsigned char *peOp2, /* OUT: 0 for MATCH, or else an op2 value */ + Expr **ppLeft, /* Column expression to left of MATCH/op2 */ + Expr **ppRight /* Expression to left of MATCH/op2 */ +){ + if( pExpr->op==TK_FUNCTION ){ + static const struct Op2 { + const char *zOp; + unsigned char eOp2; + } aOp[] = { + { "match", SQLITE_INDEX_CONSTRAINT_MATCH }, + { "glob", SQLITE_INDEX_CONSTRAINT_GLOB }, + { "like", SQLITE_INDEX_CONSTRAINT_LIKE }, + { "regexp", SQLITE_INDEX_CONSTRAINT_REGEXP } + }; + ExprList *pList; + Expr *pCol; /* Column reference */ + int i; - if( pExpr->op!=TK_FUNCTION ){ - return 0; - } - pList = pExpr->x.pList; - if( pList==0 || pList->nExpr!=2 ){ - return 0; - } - pCol = pList->a[1].pExpr; - if( pCol->op!=TK_COLUMN || !IsVirtual(pCol->pTab) ){ - return 0; - } - for(i=0; i<ArraySize(aOp); i++){ - if( sqlite3StrICmp(pExpr->u.zToken, aOp[i].zOp)==0 ){ - *peOp2 = aOp[i].eOp2; - return 1; + pList = pExpr->x.pList; + if( pList==0 || pList->nExpr!=2 ){ + return 0; + } + pCol = pList->a[1].pExpr; + if( pCol->op!=TK_COLUMN || !IsVirtual(pCol->pTab) ){ + return 0; } + for(i=0; i<ArraySize(aOp); i++){ + if( sqlite3StrICmp(pExpr->u.zToken, aOp[i].zOp)==0 ){ + *peOp2 = aOp[i].eOp2; + *ppRight = pList->a[0].pExpr; + *ppLeft = pCol; + return 1; + } + } + }else if( pExpr->op==TK_NE || pExpr->op==TK_ISNOT || pExpr->op==TK_NOTNULL ){ + int res = 0; + Expr *pLeft = pExpr->pLeft; + Expr *pRight = pExpr->pRight; + if( pLeft->op==TK_COLUMN && IsVirtual(pLeft->pTab) ){ + res++; + } + if( pRight && pRight->op==TK_COLUMN && IsVirtual(pRight->pTab) ){ + res++; + SWAP(Expr*, pLeft, pRight); + } + *ppLeft = pLeft; + *ppRight = pRight; + if( pExpr->op==TK_NE ) *peOp2 = SQLITE_INDEX_CONSTRAINT_NE; + if( pExpr->op==TK_ISNOT ) *peOp2 = SQLITE_INDEX_CONSTRAINT_ISNOT; + if( pExpr->op==TK_NOTNULL ) *peOp2 = SQLITE_INDEX_CONSTRAINT_ISNOTNULL; + return res; } return 0; } @@ -128283,8 +135097,8 @@ static void whereCombineDisjuncts( && (eOp & (WO_EQ|WO_GT|WO_GE))!=eOp ) return; assert( pOne->pExpr->pLeft!=0 && pOne->pExpr->pRight!=0 ); assert( pTwo->pExpr->pLeft!=0 && pTwo->pExpr->pRight!=0 ); - if( sqlite3ExprCompare(pOne->pExpr->pLeft, pTwo->pExpr->pLeft, -1) ) return; - if( sqlite3ExprCompare(pOne->pExpr->pRight, pTwo->pExpr->pRight, -1) )return; + if( sqlite3ExprCompare(0,pOne->pExpr->pLeft, pTwo->pExpr->pLeft, -1) ) return; + if( sqlite3ExprCompare(0,pOne->pExpr->pRight, pTwo->pExpr->pRight,-1) )return; /* If we reach this point, it means the two subterms can be combined */ if( (eOp & (eOp-1))!=0 ){ if( eOp & (WO_LT|WO_LE) ){ @@ -128455,7 +135269,7 @@ static void exprAnalyzeOrTerm( for(j=0, pAndTerm=pAndWC->a; j<pAndWC->nTerm; j++, pAndTerm++){ assert( pAndTerm->pExpr ); if( allowedOp(pAndTerm->pExpr->op) - || pAndTerm->eOperator==WO_MATCH + || pAndTerm->eOperator==WO_AUX ){ b |= sqlite3WhereGetMask(&pWInfo->sMaskSet, pAndTerm->leftCursor); } @@ -128633,7 +135447,6 @@ static void exprAnalyzeOrTerm( }else{ sqlite3ExprListDelete(db, pList); } - pTerm->eOperator = WO_NOOP; /* case 1 trumps case 3 */ } } } @@ -128657,7 +135470,6 @@ static void exprAnalyzeOrTerm( static int termIsEquivalence(Parse *pParse, Expr *pExpr){ char aff1, aff2; CollSeq *pColl; - const char *zColl1, *zColl2; if( !OptimizationEnabled(pParse->db, SQLITE_Transitive) ) return 0; if( pExpr->op!=TK_EQ && pExpr->op!=TK_IS ) return 0; if( ExprHasProperty(pExpr, EP_FromJoin) ) return 0; @@ -128670,11 +135482,7 @@ static int termIsEquivalence(Parse *pParse, Expr *pExpr){ } pColl = sqlite3BinaryCompareCollSeq(pParse, pExpr->pLeft, pExpr->pRight); if( pColl==0 || sqlite3StrICmp(pColl->zName, "BINARY")==0 ) return 1; - pColl = sqlite3ExprCollSeq(pParse, pExpr->pLeft); - zColl1 = pColl ? pColl->zName : 0; - pColl = sqlite3ExprCollSeq(pParse, pExpr->pRight); - zColl2 = pColl ? pColl->zName : 0; - return sqlite3_stricmp(zColl1, zColl2)==0; + return sqlite3ExprCollSeqMatch(pParse, pExpr->pLeft, pExpr->pRight); } /* @@ -128696,6 +135504,9 @@ static Bitmask exprSelectUsage(WhereMaskSet *pMaskSet, Select *pS){ for(i=0; i<pSrc->nSrc; i++){ mask |= exprSelectUsage(pMaskSet, pSrc->a[i].pSelect); mask |= sqlite3WhereExprUsage(pMaskSet, pSrc->a[i].pOn); + if( pSrc->a[i].fg.isTabFunc ){ + mask |= sqlite3WhereExprListUsage(pMaskSet, pSrc->a[i].u1.pFuncArg); + } } } pS = pS->pPrior; @@ -128707,8 +135518,8 @@ static Bitmask exprSelectUsage(WhereMaskSet *pMaskSet, Select *pS){ ** Expression pExpr is one operand of a comparison operator that might ** be useful for indexing. This routine checks to see if pExpr appears ** in any index. Return TRUE (1) if pExpr is an indexed term and return -** FALSE (0) if not. If TRUE is returned, also set *piCur to the cursor -** number of the table that is indexed and *piColumn to the column number +** FALSE (0) if not. If TRUE is returned, also set aiCurCol[0] to the cursor +** number of the table that is indexed and aiCurCol[1] to the column number ** of the column that is indexed, or XN_EXPR (-2) if an expression is being ** indexed. ** @@ -128716,18 +135527,37 @@ static Bitmask exprSelectUsage(WhereMaskSet *pMaskSet, Select *pS){ ** true even if that particular column is not indexed, because the column ** might be added to an automatic index later. */ -static int exprMightBeIndexed( +static SQLITE_NOINLINE int exprMightBeIndexed2( SrcList *pFrom, /* The FROM clause */ - int op, /* The specific comparison operator */ Bitmask mPrereq, /* Bitmask of FROM clause terms referenced by pExpr */ - Expr *pExpr, /* An operand of a comparison operator */ - int *piCur, /* Write the referenced table cursor number here */ - int *piColumn /* Write the referenced table column number here */ + int *aiCurCol, /* Write the referenced table cursor and column here */ + Expr *pExpr /* An operand of a comparison operator */ ){ Index *pIdx; int i; int iCur; - + for(i=0; mPrereq>1; i++, mPrereq>>=1){} + iCur = pFrom->a[i].iCursor; + for(pIdx=pFrom->a[i].pTab->pIndex; pIdx; pIdx=pIdx->pNext){ + if( pIdx->aColExpr==0 ) continue; + for(i=0; i<pIdx->nKeyCol; i++){ + if( pIdx->aiColumn[i]!=XN_EXPR ) continue; + if( sqlite3ExprCompareSkip(pExpr, pIdx->aColExpr->a[i].pExpr, iCur)==0 ){ + aiCurCol[0] = iCur; + aiCurCol[1] = XN_EXPR; + return 1; + } + } + } + return 0; +} +static int exprMightBeIndexed( + SrcList *pFrom, /* The FROM clause */ + Bitmask mPrereq, /* Bitmask of FROM clause terms referenced by pExpr */ + int *aiCurCol, /* Write the referenced table cursor & column here */ + Expr *pExpr, /* An operand of a comparison operator */ + int op /* The specific comparison operator */ +){ /* If this expression is a vector to the left or right of a ** inequality constraint (>, <, >= or <=), perform the processing ** on the first element of the vector. */ @@ -128739,26 +135569,13 @@ static int exprMightBeIndexed( } if( pExpr->op==TK_COLUMN ){ - *piCur = pExpr->iTable; - *piColumn = pExpr->iColumn; + aiCurCol[0] = pExpr->iTable; + aiCurCol[1] = pExpr->iColumn; return 1; } if( mPrereq==0 ) return 0; /* No table references */ if( (mPrereq&(mPrereq-1))!=0 ) return 0; /* Refs more than one table */ - for(i=0; mPrereq>1; i++, mPrereq>>=1){} - iCur = pFrom->a[i].iCursor; - for(pIdx=pFrom->a[i].pTab->pIndex; pIdx; pIdx=pIdx->pNext){ - if( pIdx->aColExpr==0 ) continue; - for(i=0; i<pIdx->nKeyCol; i++){ - if( pIdx->aiColumn[i]!=XN_EXPR ) continue; - if( sqlite3ExprCompare(pExpr, pIdx->aColExpr->a[i].pExpr, iCur)==0 ){ - *piCur = iCur; - *piColumn = XN_EXPR; - return 1; - } - } - } - return 0; + return exprMightBeIndexed2(pFrom,mPrereq,aiCurCol,pExpr); } /* @@ -128797,7 +135614,7 @@ static void exprAnalyze( int op; /* Top-level operator. pExpr->op */ Parse *pParse = pWInfo->pParse; /* Parsing context */ sqlite3 *db = pParse->db; /* Database connection */ - unsigned char eOp2; /* op2 value for LIKE/REGEXP/GLOB */ + unsigned char eOp2 = 0; /* op2 value for LIKE/REGEXP/GLOB */ int nLeft; /* Number of elements on left side vector */ if( db->mallocFailed ){ @@ -128822,7 +135639,9 @@ static void exprAnalyze( }else{ pTerm->prereqRight = sqlite3WhereExprUsage(pMaskSet, pExpr->pRight); } + pMaskSet->bVarSelect = 0; prereqAll = sqlite3WhereExprUsage(pMaskSet, pExpr); + if( pMaskSet->bVarSelect ) pTerm->wtFlags |= TERM_VARSELECT; if( ExprHasProperty(pExpr, EP_FromJoin) ){ Bitmask x = sqlite3WhereGetMask(pMaskSet, pExpr->iRightJoinTable); prereqAll |= x; @@ -128838,7 +135657,7 @@ static void exprAnalyze( pTerm->iParent = -1; pTerm->eOperator = 0; if( allowedOp(op) ){ - int iCur, iColumn; + int aiCurCol[2]; Expr *pLeft = sqlite3ExprSkipCollate(pExpr->pLeft); Expr *pRight = sqlite3ExprSkipCollate(pExpr->pRight); u16 opMask = (pTerm->prereqRight & prereqLeft)==0 ? WO_ALL : WO_EQUIV; @@ -128849,14 +135668,14 @@ static void exprAnalyze( pLeft = pLeft->x.pList->a[pTerm->iField-1].pExpr; } - if( exprMightBeIndexed(pSrc, op, prereqLeft, pLeft, &iCur, &iColumn) ){ - pTerm->leftCursor = iCur; - pTerm->u.leftColumn = iColumn; + if( exprMightBeIndexed(pSrc, prereqLeft, aiCurCol, pLeft, op) ){ + pTerm->leftCursor = aiCurCol[0]; + pTerm->u.leftColumn = aiCurCol[1]; pTerm->eOperator = operatorMask(op) & opMask; } if( op==TK_IS ) pTerm->wtFlags |= TERM_IS; if( pRight - && exprMightBeIndexed(pSrc, op, pTerm->prereqRight, pRight, &iCur,&iColumn) + && exprMightBeIndexed(pSrc, pTerm->prereqRight, aiCurCol, pRight, op) ){ WhereTerm *pNew; Expr *pDup; @@ -128886,8 +135705,8 @@ static void exprAnalyze( pNew = pTerm; } exprCommute(pParse, pDup); - pNew->leftCursor = iCur; - pNew->u.leftColumn = iColumn; + pNew->leftCursor = aiCurCol[0]; + pNew->u.leftColumn = aiCurCol[1]; testcase( (prereqLeft | extraRight) != prereqLeft ); pNew->prereqRight = prereqLeft | extraRight; pNew->prereqAll = prereqAll; @@ -129029,38 +135848,46 @@ static void exprAnalyze( #endif /* SQLITE_OMIT_LIKE_OPTIMIZATION */ #ifndef SQLITE_OMIT_VIRTUALTABLE - /* Add a WO_MATCH auxiliary term to the constraint set if the - ** current expression is of the form: column MATCH expr. + /* Add a WO_AUX auxiliary term to the constraint set if the + ** current expression is of the form "column OP expr" where OP + ** is an operator that gets passed into virtual tables but which is + ** not normally optimized for ordinary tables. In other words, OP + ** is one of MATCH, LIKE, GLOB, REGEXP, !=, IS, IS NOT, or NOT NULL. ** This information is used by the xBestIndex methods of ** virtual tables. The native query optimizer does not attempt ** to do anything with MATCH functions. */ - if( pWC->op==TK_AND && isMatchOfColumn(pExpr, &eOp2) ){ - int idxNew; - Expr *pRight, *pLeft; - WhereTerm *pNewTerm; - Bitmask prereqColumn, prereqExpr; - - pRight = pExpr->x.pList->a[0].pExpr; - pLeft = pExpr->x.pList->a[1].pExpr; - prereqExpr = sqlite3WhereExprUsage(pMaskSet, pRight); - prereqColumn = sqlite3WhereExprUsage(pMaskSet, pLeft); - if( (prereqExpr & prereqColumn)==0 ){ - Expr *pNewExpr; - pNewExpr = sqlite3PExpr(pParse, TK_MATCH, - 0, sqlite3ExprDup(db, pRight, 0)); - idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); - testcase( idxNew==0 ); - pNewTerm = &pWC->a[idxNew]; - pNewTerm->prereqRight = prereqExpr; - pNewTerm->leftCursor = pLeft->iTable; - pNewTerm->u.leftColumn = pLeft->iColumn; - pNewTerm->eOperator = WO_MATCH; - pNewTerm->eMatchOp = eOp2; - markTermAsChild(pWC, idxNew, idxTerm); - pTerm = &pWC->a[idxTerm]; - pTerm->wtFlags |= TERM_COPIED; - pNewTerm->prereqAll = pTerm->prereqAll; + if( pWC->op==TK_AND ){ + Expr *pRight = 0, *pLeft = 0; + int res = isAuxiliaryVtabOperator(pExpr, &eOp2, &pLeft, &pRight); + while( res-- > 0 ){ + int idxNew; + WhereTerm *pNewTerm; + Bitmask prereqColumn, prereqExpr; + + prereqExpr = sqlite3WhereExprUsage(pMaskSet, pRight); + prereqColumn = sqlite3WhereExprUsage(pMaskSet, pLeft); + if( (prereqExpr & prereqColumn)==0 ){ + Expr *pNewExpr; + pNewExpr = sqlite3PExpr(pParse, TK_MATCH, + 0, sqlite3ExprDup(db, pRight, 0)); + if( ExprHasProperty(pExpr, EP_FromJoin) && pNewExpr ){ + ExprSetProperty(pNewExpr, EP_FromJoin); + } + idxNew = whereClauseInsert(pWC, pNewExpr, TERM_VIRTUAL|TERM_DYNAMIC); + testcase( idxNew==0 ); + pNewTerm = &pWC->a[idxNew]; + pNewTerm->prereqRight = prereqExpr; + pNewTerm->leftCursor = pLeft->iTable; + pNewTerm->u.leftColumn = pLeft->iColumn; + pNewTerm->eOperator = WO_AUX; + pNewTerm->eMatchOp = eOp2; + markTermAsChild(pWC, idxNew, idxTerm); + pTerm = &pWC->a[idxTerm]; + pTerm->wtFlags |= TERM_COPIED; + pNewTerm->prereqAll = pTerm->prereqAll; + } + SWAP(Expr*, pLeft, pRight); } } #endif /* SQLITE_OMIT_VIRTUALTABLE */ @@ -129092,7 +135919,7 @@ static void exprAnalyze( exprAnalyze(pSrc, pWC, idxNew); } pTerm = &pWC->a[idxTerm]; - pTerm->wtFlags = TERM_CODED|TERM_VIRTUAL; /* Disable the original */ + pTerm->wtFlags |= TERM_CODED|TERM_VIRTUAL; /* Disable the original */ pTerm->eOperator = 0; } @@ -129246,13 +136073,16 @@ SQLITE_PRIVATE Bitmask sqlite3WhereExprUsage(WhereMaskSet *pMaskSet, Expr *p){ Bitmask mask; if( p==0 ) return 0; if( p->op==TK_COLUMN ){ - mask = sqlite3WhereGetMask(pMaskSet, p->iTable); - return mask; + return sqlite3WhereGetMask(pMaskSet, p->iTable); } + mask = (p->op==TK_IF_NULL_ROW) ? sqlite3WhereGetMask(pMaskSet, p->iTable) : 0; assert( !ExprHasProperty(p, EP_TokenOnly) ); - mask = p->pRight ? sqlite3WhereExprUsage(pMaskSet, p->pRight) : 0; if( p->pLeft ) mask |= sqlite3WhereExprUsage(pMaskSet, p->pLeft); - if( ExprHasProperty(p, EP_xIsSelect) ){ + if( p->pRight ){ + mask |= sqlite3WhereExprUsage(pMaskSet, p->pRight); + assert( p->x.pList==0 ); + }else if( ExprHasProperty(p, EP_xIsSelect) ){ + if( ExprHasProperty(p, EP_VarSelect) ) pMaskSet->bVarSelect = 1; mask |= exprSelectUsage(pMaskSet, p->x.pSelect); }else if( p->x.pList ){ mask |= sqlite3WhereExprListUsage(pMaskSet, p->x.pList); @@ -129352,6 +136182,21 @@ SQLITE_PRIVATE void sqlite3WhereTabFuncArgs( /* #include "sqliteInt.h" */ /* #include "whereInt.h" */ +/* +** Extra information appended to the end of sqlite3_index_info but not +** visible to the xBestIndex function, at least not directly. The +** sqlite3_vtab_collation() interface knows how to reach it, however. +** +** This object is not an API and can be changed from one release to the +** next. As long as allocateIndexInfo() and sqlite3_vtab_collation() +** agree on the structure, all will be well. +*/ +typedef struct HiddenIndexInfo HiddenIndexInfo; +struct HiddenIndexInfo { + WhereClause *pWC; /* The Where clause being analyzed */ + Parse *pParse; /* The parsing context */ +}; + /* Forward declaration of methods */ static int whereLoopResize(sqlite3*, WhereLoop*, int); @@ -129542,7 +136387,8 @@ static WhereTerm *whereScanNext(WhereScan *pScan){ if( pTerm->leftCursor==iCur && pTerm->u.leftColumn==iColumn && (iColumn!=XN_EXPR - || sqlite3ExprCompare(pTerm->pExpr->pLeft,pScan->pIdxExpr,iCur)==0) + || sqlite3ExprCompareSkip(pTerm->pExpr->pLeft, + pScan->pIdxExpr,iCur)==0) && (pScan->iEquiv<=1 || !ExprHasProperty(pTerm->pExpr, EP_FromJoin)) ){ if( (pTerm->eOperator & WO_EQUIV)!=0 @@ -129735,8 +136581,8 @@ static int findIndexCol( && p->iColumn==pIdx->aiColumn[iCol] && p->iTable==iBase ){ - CollSeq *pColl = sqlite3ExprCollSeq(pParse, pList->a[i].pExpr); - if( pColl && 0==sqlite3StrICmp(pColl->zName, zColl) ){ + CollSeq *pColl = sqlite3ExprNNCollSeq(pParse, pList->a[i].pExpr); + if( 0==sqlite3StrICmp(pColl->zName, zColl) ){ return i; } } @@ -129849,14 +136695,16 @@ static LogEst estLog(LogEst N){ ** value stored in its output register. */ static void translateColumnToCopy( - Vdbe *v, /* The VDBE containing code to translate */ + Parse *pParse, /* Parsing context */ int iStart, /* Translate from this opcode to the end */ int iTabCur, /* OP_Column/OP_Rowid references to this table */ int iRegister, /* The first column is in this register */ int bIncrRowid /* If non-zero, transform OP_rowid to OP_AddImm(1) */ ){ + Vdbe *v = pParse->pVdbe; VdbeOp *pOp = sqlite3VdbeGetOp(v, iStart); int iEnd = sqlite3VdbeCurrentAddr(v); + if( pParse->db->mallocFailed ) return; for(; iStart<iEnd; iStart++, pOp++){ if( pOp->p1!=iTabCur ) continue; if( pOp->opcode==OP_Column ){ @@ -129938,6 +136786,15 @@ static int termCanDriveIndex( char aff; if( pTerm->leftCursor!=pSrc->iCursor ) return 0; if( (pTerm->eOperator & (WO_EQ|WO_IS))==0 ) return 0; + if( (pSrc->fg.jointype & JT_LEFT) + && !ExprHasProperty(pTerm->pExpr, EP_FromJoin) + && (pTerm->eOperator & WO_IS) + ){ + /* Cannot use an IS term from the WHERE clause as an index driver for + ** the RHS of a LEFT JOIN. Such a term can only be used if it is from + ** the ON clause. */ + return 0; + } if( (pTerm->prereqRight & notReady)!=0 ) return 0; if( pTerm->u.leftColumn<0 ) return 0; aff = pSrc->pTab->aCol[pTerm->u.leftColumn].affinity; @@ -130134,7 +136991,9 @@ static void constructAutomaticIndex( if( pPartial ) sqlite3VdbeResolveLabel(v, iContinue); if( pTabItem->fg.viaCoroutine ){ sqlite3VdbeChangeP2(v, addrCounter, regBase+n); - translateColumnToCopy(v, addrTop, pLevel->iTabCur, pTabItem->regResult, 1); + testcase( pParse->db->mallocFailed ); + translateColumnToCopy(pParse, addrTop, pLevel->iTabCur, + pTabItem->regResult, 1); sqlite3VdbeGoto(v, addrTop); pTabItem->fg.viaCoroutine = 0; }else{ @@ -130160,11 +137019,11 @@ end_auto_index_create: ** by passing the pointer returned by this function to sqlite3_free(). */ static sqlite3_index_info *allocateIndexInfo( - Parse *pParse, - WhereClause *pWC, + Parse *pParse, /* The parsing context */ + WhereClause *pWC, /* The WHERE clause being analyzed */ Bitmask mUnusable, /* Ignore terms with these prereqs */ - struct SrcList_item *pSrc, - ExprList *pOrderBy, + struct SrcList_item *pSrc, /* The FROM clause term that is the vtab */ + ExprList *pOrderBy, /* The ORDER BY clause */ u16 *pmNoOmit /* Mask of terms not to omit */ ){ int i, j; @@ -130172,6 +137031,7 @@ static sqlite3_index_info *allocateIndexInfo( struct sqlite3_index_constraint *pIdxCons; struct sqlite3_index_orderby *pIdxOrderBy; struct sqlite3_index_constraint_usage *pUsage; + struct HiddenIndexInfo *pHidden; WhereTerm *pTerm; int nOrderBy; sqlite3_index_info *pIdxInfo; @@ -130187,7 +137047,7 @@ static sqlite3_index_info *allocateIndexInfo( testcase( pTerm->eOperator & WO_ISNULL ); testcase( pTerm->eOperator & WO_IS ); testcase( pTerm->eOperator & WO_ALL ); - if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV|WO_IS))==0 ) continue; + if( (pTerm->eOperator & ~(WO_EQUIV))==0 ) continue; if( pTerm->wtFlags & TERM_VNULL ) continue; assert( pTerm->u.leftColumn>=(-1) ); nTerm++; @@ -130213,7 +137073,7 @@ static sqlite3_index_info *allocateIndexInfo( */ pIdxInfo = sqlite3DbMallocZero(pParse->db, sizeof(*pIdxInfo) + (sizeof(*pIdxCons) + sizeof(*pUsage))*nTerm - + sizeof(*pIdxOrderBy)*nOrderBy ); + + sizeof(*pIdxOrderBy)*nOrderBy + sizeof(*pHidden) ); if( pIdxInfo==0 ){ sqlite3ErrorMsg(pParse, "out of memory"); return 0; @@ -130224,7 +137084,8 @@ static sqlite3_index_info *allocateIndexInfo( ** changing them. We have to do some funky casting in order to ** initialize those fields. */ - pIdxCons = (struct sqlite3_index_constraint*)&pIdxInfo[1]; + pHidden = (struct HiddenIndexInfo*)&pIdxInfo[1]; + pIdxCons = (struct sqlite3_index_constraint*)&pHidden[1]; pIdxOrderBy = (struct sqlite3_index_orderby*)&pIdxCons[nTerm]; pUsage = (struct sqlite3_index_constraint_usage*)&pIdxOrderBy[nOrderBy]; *(int*)&pIdxInfo->nConstraint = nTerm; @@ -130234,8 +137095,10 @@ static sqlite3_index_info *allocateIndexInfo( *(struct sqlite3_index_constraint_usage**)&pIdxInfo->aConstraintUsage = pUsage; + pHidden->pWC = pWC; + pHidden->pParse = pParse; for(i=j=0, pTerm=pWC->a; i<pWC->nTerm; i++, pTerm++){ - u8 op; + u16 op; if( pTerm->leftCursor != pSrc->iCursor ) continue; if( pTerm->prereqRight & mUnusable ) continue; assert( IsPowerOfTwo(pTerm->eOperator & ~WO_EQUIV) ); @@ -130243,34 +137106,40 @@ static sqlite3_index_info *allocateIndexInfo( testcase( pTerm->eOperator & WO_IS ); testcase( pTerm->eOperator & WO_ISNULL ); testcase( pTerm->eOperator & WO_ALL ); - if( (pTerm->eOperator & ~(WO_ISNULL|WO_EQUIV|WO_IS))==0 ) continue; + if( (pTerm->eOperator & ~(WO_EQUIV))==0 ) continue; if( pTerm->wtFlags & TERM_VNULL ) continue; assert( pTerm->u.leftColumn>=(-1) ); pIdxCons[j].iColumn = pTerm->u.leftColumn; pIdxCons[j].iTermOffset = i; - op = (u8)pTerm->eOperator & WO_ALL; + op = pTerm->eOperator & WO_ALL; if( op==WO_IN ) op = WO_EQ; - if( op==WO_MATCH ){ - op = pTerm->eMatchOp; - } - pIdxCons[j].op = op; - /* The direct assignment in the previous line is possible only because - ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The - ** following asserts verify this fact. */ - assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ ); - assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT ); - assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE ); - assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT ); - assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE ); - assert( WO_MATCH==SQLITE_INDEX_CONSTRAINT_MATCH ); - assert( pTerm->eOperator & (WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_MATCH) ); - - if( op & (WO_LT|WO_LE|WO_GT|WO_GE) - && sqlite3ExprIsVector(pTerm->pExpr->pRight) - ){ - if( i<16 ) mNoOmit |= (1 << i); - if( op==WO_LT ) pIdxCons[j].op = WO_LE; - if( op==WO_GT ) pIdxCons[j].op = WO_GE; + if( op==WO_AUX ){ + pIdxCons[j].op = pTerm->eMatchOp; + }else if( op & (WO_ISNULL|WO_IS) ){ + if( op==WO_ISNULL ){ + pIdxCons[j].op = SQLITE_INDEX_CONSTRAINT_ISNULL; + }else{ + pIdxCons[j].op = SQLITE_INDEX_CONSTRAINT_IS; + } + }else{ + pIdxCons[j].op = (u8)op; + /* The direct assignment in the previous line is possible only because + ** the WO_ and SQLITE_INDEX_CONSTRAINT_ codes are identical. The + ** following asserts verify this fact. */ + assert( WO_EQ==SQLITE_INDEX_CONSTRAINT_EQ ); + assert( WO_LT==SQLITE_INDEX_CONSTRAINT_LT ); + assert( WO_LE==SQLITE_INDEX_CONSTRAINT_LE ); + assert( WO_GT==SQLITE_INDEX_CONSTRAINT_GT ); + assert( WO_GE==SQLITE_INDEX_CONSTRAINT_GE ); + assert( pTerm->eOperator&(WO_IN|WO_EQ|WO_LT|WO_LE|WO_GT|WO_GE|WO_AUX) ); + + if( op & (WO_LT|WO_LE|WO_GT|WO_GE) + && sqlite3ExprIsVector(pTerm->pExpr->pRight) + ){ + if( i<16 ) mNoOmit |= (1 << i); + if( op==WO_LT ) pIdxCons[j].op = WO_LE; + if( op==WO_GT ) pIdxCons[j].op = WO_GE; + } } j++; @@ -130520,7 +137389,7 @@ static int whereKeyStats( iGap = iGap/3; } aStat[0] = iLower + iGap; - aStat[1] = pIdx->aAvgEq[iCol]; + aStat[1] = pIdx->aAvgEq[nField-1]; } /* Restore the pRec->nField value before returning. */ @@ -131114,7 +137983,7 @@ static void whereLoopClearUnion(sqlite3 *db, WhereLoop *p){ p->u.vtab.idxStr = 0; }else if( (p->wsFlags & WHERE_AUTO_INDEX)!=0 && p->u.btree.pIndex!=0 ){ sqlite3DbFree(db, p->u.btree.pIndex->zColAff); - sqlite3DbFree(db, p->u.btree.pIndex); + sqlite3DbFreeNN(db, p->u.btree.pIndex); p->u.btree.pIndex = 0; } } @@ -131124,7 +137993,7 @@ static void whereLoopClearUnion(sqlite3 *db, WhereLoop *p){ ** Deallocate internal memory used by a WhereLoop object */ static void whereLoopClear(sqlite3 *db, WhereLoop *p){ - if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFree(db, p->aLTerm); + if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFreeNN(db, p->aLTerm); whereLoopClearUnion(db, p); whereLoopInit(p); } @@ -131139,7 +138008,7 @@ static int whereLoopResize(sqlite3 *db, WhereLoop *p, int n){ paNew = sqlite3DbMallocRawNN(db, sizeof(p->aLTerm[0])*n); if( paNew==0 ) return SQLITE_NOMEM_BKPT; memcpy(paNew, p->aLTerm, sizeof(p->aLTerm[0])*p->nLSlot); - if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFree(db, p->aLTerm); + if( p->aLTerm!=p->aLTermSpace ) sqlite3DbFreeNN(db, p->aLTerm); p->aLTerm = paNew; p->nLSlot = n; return SQLITE_OK; @@ -131169,47 +138038,47 @@ static int whereLoopXfer(sqlite3 *db, WhereLoop *pTo, WhereLoop *pFrom){ */ static void whereLoopDelete(sqlite3 *db, WhereLoop *p){ whereLoopClear(db, p); - sqlite3DbFree(db, p); + sqlite3DbFreeNN(db, p); } /* ** Free a WhereInfo structure */ static void whereInfoFree(sqlite3 *db, WhereInfo *pWInfo){ - if( ALWAYS(pWInfo) ){ - int i; - for(i=0; i<pWInfo->nLevel; i++){ - WhereLevel *pLevel = &pWInfo->a[i]; - if( pLevel->pWLoop && (pLevel->pWLoop->wsFlags & WHERE_IN_ABLE) ){ - sqlite3DbFree(db, pLevel->u.in.aInLoop); - } - } - sqlite3WhereClauseClear(&pWInfo->sWC); - while( pWInfo->pLoops ){ - WhereLoop *p = pWInfo->pLoops; - pWInfo->pLoops = p->pNextLoop; - whereLoopDelete(db, p); + int i; + assert( pWInfo!=0 ); + for(i=0; i<pWInfo->nLevel; i++){ + WhereLevel *pLevel = &pWInfo->a[i]; + if( pLevel->pWLoop && (pLevel->pWLoop->wsFlags & WHERE_IN_ABLE) ){ + sqlite3DbFree(db, pLevel->u.in.aInLoop); } - sqlite3DbFree(db, pWInfo); } + sqlite3WhereClauseClear(&pWInfo->sWC); + while( pWInfo->pLoops ){ + WhereLoop *p = pWInfo->pLoops; + pWInfo->pLoops = p->pNextLoop; + whereLoopDelete(db, p); + } + sqlite3DbFreeNN(db, pWInfo); } /* ** Return TRUE if all of the following are true: ** ** (1) X has the same or lower cost that Y -** (2) X is a proper subset of Y -** (3) X skips at least as many columns as Y -** -** By "proper subset" we mean that X uses fewer WHERE clause terms -** than Y and that every WHERE clause term used by X is also used -** by Y. +** (2) X uses fewer WHERE clause terms than Y +** (3) Every WHERE clause term used by X is also used by Y +** (4) X skips at least as many columns as Y +** (5) If X is a covering index, than Y is too ** +** Conditions (2) and (3) mean that X is a "proper subset" of Y. ** If X is a proper subset of Y then Y is a better choice and ought ** to have a lower cost. This routine returns TRUE when that cost -** relationship is inverted and needs to be adjusted. The third rule +** relationship is inverted and needs to be adjusted. Constraint (4) ** was added because if X uses skip-scan less than Y it still might -** deserve a lower cost even if it is a proper subset of Y. +** deserve a lower cost even if it is a proper subset of Y. Constraint (5) +** was added because a covering index probably deserves to have a lower cost +** than a non-covering index even if it is a proper subset. */ static int whereLoopCheaperProperSubset( const WhereLoop *pX, /* First WhereLoop to compare */ @@ -131231,6 +138100,10 @@ static int whereLoopCheaperProperSubset( } if( j<0 ) return 0; /* X not a subset of Y since term X[i] not used by Y */ } + if( (pX->wsFlags&WHERE_IDX_ONLY)!=0 + && (pY->wsFlags&WHERE_IDX_ONLY)==0 ){ + return 0; /* Constraint (5) */ + } return 1; /* All conditions meet */ } @@ -131273,16 +138146,17 @@ static void whereLoopAdjustCost(const WhereLoop *p, WhereLoop *pTemplate){ /* ** Search the list of WhereLoops in *ppPrev looking for one that can be -** supplanted by pTemplate. +** replaced by pTemplate. ** -** Return NULL if the WhereLoop list contains an entry that can supplant -** pTemplate, in other words if pTemplate does not belong on the list. +** Return NULL if pTemplate does not belong on the WhereLoop list. +** In other words if pTemplate ought to be dropped from further consideration. ** -** If pX is a WhereLoop that pTemplate can supplant, then return the +** If pX is a WhereLoop that pTemplate can replace, then return the ** link that points to pX. ** -** If pTemplate cannot supplant any existing element of the list but needs -** to be added to the list, then return a pointer to the tail of the list. +** If pTemplate cannot replace any existing element of the list but needs +** to be added to the list as a new entry, then return a pointer to the +** tail of the list. */ static WhereLoop **whereLoopFindLesser( WhereLoop **ppPrev, @@ -131427,8 +138301,10 @@ static int whereLoopInsert(WhereLoopBuilder *pBuilder, WhereLoop *pTemplate){ if( p!=0 ){ sqlite3DebugPrintf("replace: "); whereLoopPrint(p, pBuilder->pWC); + sqlite3DebugPrintf(" with: "); + }else{ + sqlite3DebugPrintf(" add: "); } - sqlite3DebugPrintf(" add: "); whereLoopPrint(pTemplate, pBuilder->pWC); } #endif @@ -131660,8 +138536,8 @@ static int whereLoopAddBtreeIndex( pNew = pBuilder->pNew; if( db->mallocFailed ) return SQLITE_NOMEM_BKPT; - WHERETRACE(0x800, ("BEGIN addBtreeIdx(%s), nEq=%d\n", - pProbe->zName, pNew->u.btree.nEq)); + WHERETRACE(0x800, ("BEGIN %s.addBtreeIdx(%s), nEq=%d\n", + pProbe->pTable->zName,pProbe->zName, pNew->u.btree.nEq)); assert( (pNew->wsFlags & WHERE_VIRTUALTABLE)==0 ); assert( (pNew->wsFlags & WHERE_TOP_LIMIT)==0 ); @@ -131707,18 +138583,20 @@ static int whereLoopAddBtreeIndex( ** to mix with a lower range bound from some other source */ if( pTerm->wtFlags & TERM_LIKEOPT && pTerm->eOperator==WO_LT ) continue; - /* Do not allow IS constraints from the WHERE clause to be used by the + /* Do not allow constraints from the WHERE clause to be used by the ** right table of a LEFT JOIN. Only constraints in the ON clause are ** allowed */ if( (pSrc->fg.jointype & JT_LEFT)!=0 && !ExprHasProperty(pTerm->pExpr, EP_FromJoin) - && (eOp & (WO_IS|WO_ISNULL))!=0 ){ - testcase( eOp & WO_IS ); - testcase( eOp & WO_ISNULL ); continue; } + if( IsUniqueIndex(pProbe) && saved_nEq==pProbe->nKeyCol-1 ){ + pBuilder->bldFlags |= SQLITE_BLDF_UNIQUE; + }else{ + pBuilder->bldFlags |= SQLITE_BLDF_INDEXED; + } pNew->wsFlags = saved_wsFlags; pNew->u.btree.nEq = saved_nEq; pNew->u.btree.nBtm = saved_nBtm; @@ -131761,12 +138639,14 @@ static int whereLoopAddBtreeIndex( pNew->wsFlags |= WHERE_COLUMN_EQ; assert( saved_nEq==pNew->u.btree.nEq ); if( iCol==XN_ROWID - || (iCol>0 && nInMul==0 && saved_nEq==pProbe->nKeyCol-1) + || (iCol>=0 && nInMul==0 && saved_nEq==pProbe->nKeyCol-1) ){ - if( iCol>=0 && pProbe->uniqNotNull==0 ){ - pNew->wsFlags |= WHERE_UNQ_WANTED; - }else{ + if( iCol==XN_ROWID || pProbe->uniqNotNull + || (pProbe->nKeyCol==1 && pProbe->onError && eOp==WO_EQ) + ){ pNew->wsFlags |= WHERE_ONEROW; + }else{ + pNew->wsFlags |= WHERE_UNQ_WANTED; } } }else if( eOp & WO_ISNULL ){ @@ -131940,8 +138820,8 @@ static int whereLoopAddBtreeIndex( pNew->wsFlags = saved_wsFlags; } - WHERETRACE(0x800, ("END addBtreeIdx(%s), nEq=%d, rc=%d\n", - pProbe->zName, saved_nEq, rc)); + WHERETRACE(0x800, ("END %s.addBtreeIdx(%s), nEq=%d, rc=%d\n", + pProbe->pTable->zName, pProbe->zName, saved_nEq, rc)); return rc; } @@ -131974,7 +138854,7 @@ static int indexMightHelpWithOrderBy( }else if( (aColExpr = pIndex->aColExpr)!=0 ){ for(jj=0; jj<pIndex->nKeyCol; jj++){ if( pIndex->aiColumn[jj]!=XN_EXPR ) continue; - if( sqlite3ExprCompare(pExpr,aColExpr->a[jj].pExpr,iCursor)==0 ){ + if( sqlite3ExprCompareSkip(pExpr,aColExpr->a[jj].pExpr,iCursor)==0 ){ return 1; } } @@ -132007,14 +138887,16 @@ static Bitmask columnsInIndex(Index *pIdx){ static int whereUsablePartialIndex(int iTab, WhereClause *pWC, Expr *pWhere){ int i; WhereTerm *pTerm; + Parse *pParse = pWC->pWInfo->pParse; while( pWhere->op==TK_AND ){ if( !whereUsablePartialIndex(iTab,pWC,pWhere->pLeft) ) return 0; pWhere = pWhere->pRight; } + if( pParse->db->flags & SQLITE_EnableQPSG ) pParse = 0; for(i=0, pTerm=pWC->a; i<pWC->nTerm; i++, pTerm++){ Expr *pExpr = pTerm->pExpr; - if( sqlite3ExprImpliesExpr(pExpr, pWhere, iTab) - && (!ExprHasProperty(pExpr, EP_FromJoin) || pExpr->iRightJoinTable==iTab) + if( (!ExprHasProperty(pExpr, EP_FromJoin) || pExpr->iRightJoinTable==iTab) + && sqlite3ExprImpliesExpr(pParse, pExpr, pWhere, iTab) ){ return 1; } @@ -132143,14 +139025,16 @@ static int whereLoopAddBtree( /* TUNING: One-time cost for computing the automatic index is ** estimated to be X*N*log2(N) where N is the number of rows in ** the table being indexed and where X is 7 (LogEst=28) for normal - ** tables or 1.375 (LogEst=4) for views and subqueries. The value + ** tables or 0.5 (LogEst=-10) for views and subqueries. The value ** of X is smaller for views and subqueries so that the query planner ** will be more aggressive about generating automatic indexes for ** those objects, since there is no opportunity to add schema ** indexes on subqueries and views. */ - pNew->rSetup = rLogSize + rSize + 4; + pNew->rSetup = rLogSize + rSize; if( pTab->pSelect==0 && (pTab->tabFlags & TF_Ephemeral)==0 ){ - pNew->rSetup += 24; + pNew->rSetup += 28; + }else{ + pNew->rSetup -= 10; } ApplyCostMultiplier(pNew->rSetup, pTab->costMult); if( pNew->rSetup<0 ) pNew->rSetup = 0; @@ -132168,14 +139052,17 @@ static int whereLoopAddBtree( } #endif /* SQLITE_OMIT_AUTOMATIC_INDEX */ - /* Loop over all indices - */ - for(; rc==SQLITE_OK && pProbe; pProbe=pProbe->pNext, iSortIdx++){ + /* Loop over all indices. If there was an INDEXED BY clause, then only + ** consider index pProbe. */ + for(; rc==SQLITE_OK && pProbe; + pProbe=(pSrc->pIBIndex ? 0 : pProbe->pNext), iSortIdx++ + ){ if( pProbe->pPartIdxWhere!=0 && !whereUsablePartialIndex(pSrc->iCursor, pWC, pProbe->pPartIdxWhere) ){ testcase( pNew->iTab!=pSrc->iCursor ); /* See ticket [98d973b8f5] */ continue; /* Partial index inappropriate for this query */ } + if( pProbe->bNoQuery ) continue; rSize = pProbe->aiRowLogEst[0]; pNew->u.btree.nEq = 0; pNew->u.btree.nBtm = 0; @@ -132266,16 +139153,20 @@ static int whereLoopAddBtree( } } + pBuilder->bldFlags = 0; rc = whereLoopAddBtreeIndex(pBuilder, pSrc, pProbe, 0); + if( pBuilder->bldFlags==SQLITE_BLDF_INDEXED ){ + /* If a non-unique index is used, or if a prefix of the key for + ** unique index is used (making the index functionally non-unique) + ** then the sqlite_stat1 data becomes important for scoring the + ** plan */ + pTab->tabFlags |= TF_StatsUsed; + } #ifdef SQLITE_ENABLE_STAT3_OR_STAT4 sqlite3Stat4ProbeFree(pBuilder->pRec); pBuilder->nRecValid = 0; pBuilder->pRec = 0; #endif - - /* If there was an INDEXED BY clause, then only that one index is - ** considered. */ - if( pSrc->pIBIndex ) break; } return rc; } @@ -132370,9 +139261,9 @@ static int whereLoopAddVirtualOne( || pNew->aLTerm[iTerm]!=0 || pIdxCons->usable==0 ){ - rc = SQLITE_ERROR; sqlite3ErrorMsg(pParse,"%s.xBestIndex malfunction",pSrc->pTab->zName); - return rc; + testcase( pIdxInfo->needToFreeIdxStr ); + return SQLITE_ERROR; } testcase( iTerm==nConstraint-1 ); testcase( j==0 ); @@ -132400,6 +139291,15 @@ static int whereLoopAddVirtualOne( pNew->u.vtab.omitMask &= ~mNoOmit; pNew->nLTerm = mxTerm+1; + for(i=0; i<=mxTerm; i++){ + if( pNew->aLTerm[i]==0 ){ + /* The non-zero argvIdx values must be contiguous. Raise an + ** error if they are not */ + sqlite3ErrorMsg(pParse,"%s.xBestIndex malfunction",pSrc->pTab->zName); + testcase( pIdxInfo->needToFreeIdxStr ); + return SQLITE_ERROR; + } + } assert( pNew->nLTerm<=pNew->nLSlot ); pNew->u.vtab.idxNum = pIdxInfo->idxNum; pNew->u.vtab.needFree = pIdxInfo->needToFreeIdxStr; @@ -132430,6 +139330,27 @@ static int whereLoopAddVirtualOne( return rc; } +/* +** If this function is invoked from within an xBestIndex() callback, it +** returns a pointer to a buffer containing the name of the collation +** sequence associated with element iCons of the sqlite3_index_info.aConstraint +** array. Or, if iCons is out of range or there is no active xBestIndex +** call, return NULL. +*/ +SQLITE_API const char *sqlite3_vtab_collation(sqlite3_index_info *pIdxInfo, int iCons){ + HiddenIndexInfo *pHidden = (HiddenIndexInfo*)&pIdxInfo[1]; + const char *zRet = 0; + if( iCons>=0 && iCons<pIdxInfo->nConstraint ){ + CollSeq *pC = 0; + int iTerm = pIdxInfo->aConstraint[iCons].iTermOffset; + Expr *pX = pHidden->pWC->a[iTerm].pExpr; + if( pX->pLeft ){ + pC = sqlite3BinaryCompareCollSeq(pHidden->pParse, pX->pLeft, pX->pRight); + } + zRet = (pC ? pC->zName : "BINARY"); + } + return zRet; +} /* ** Add all WhereLoop objects for a table of the join identified by @@ -132494,6 +139415,7 @@ static int whereLoopAddVirtual( } /* First call xBestIndex() with all constraints usable. */ + WHERETRACE(0x800, ("BEGIN %s.addVirtual()\n", pSrc->pTab->zName)); WHERETRACE(0x40, (" VirtualOne: all usable\n")); rc = whereLoopAddVirtualOne(pBuilder, mPrereq, ALLBITS, 0, p, mNoOmit, &bIn); @@ -132568,7 +139490,8 @@ static int whereLoopAddVirtual( } if( p->needToFreeIdxStr ) sqlite3_free(p->idxStr); - sqlite3DbFree(pParse->db, p); + sqlite3DbFreeNN(pParse->db, p); + WHERETRACE(0x800, ("END %s.addVirtual(), rc=%d\n", pSrc->pTab->zName, rc)); return rc; } #endif /* SQLITE_OMIT_VIRTUALTABLE */ @@ -132752,7 +139675,7 @@ static int whereLoopAddAll(WhereLoopBuilder *pBuilder){ } /* -** Examine a WherePath (with the addition of the extra WhereLoop of the 5th +** Examine a WherePath (with the addition of the extra WhereLoop of the 6th ** parameters) to see if it outputs rows in the requested ORDER BY ** (or GROUP BY) without requiring a separate sort operation. Return N: ** @@ -132847,6 +139770,8 @@ static i8 wherePathSatisfiesOrderBy( if( pLoop->wsFlags & WHERE_VIRTUALTABLE ){ if( pLoop->u.vtab.isOrdered ) obSat = obDone; break; + }else{ + pLoop->u.btree.nIdxCol = 0; } iCur = pWInfo->pTabList->a[pLoop->iTab].iCursor; @@ -132872,14 +139797,10 @@ static i8 wherePathSatisfiesOrderBy( if( j>=pLoop->nLTerm ) continue; } if( (pTerm->eOperator&(WO_EQ|WO_IS))!=0 && pOBExpr->iColumn>=0 ){ - const char *z1, *z2; - pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); - if( !pColl ) pColl = db->pDfltColl; - z1 = pColl->zName; - pColl = sqlite3ExprCollSeq(pWInfo->pParse, pTerm->pExpr); - if( !pColl ) pColl = db->pDfltColl; - z2 = pColl->zName; - if( sqlite3StrICmp(z1, z2)!=0 ) continue; + if( sqlite3ExprCollSeqMatch(pWInfo->pParse, + pOrderBy->a[i].pExpr, pTerm->pExpr)==0 ){ + continue; + } testcase( pTerm->pExpr->op==TK_IS ); } obSat |= MASKBIT(i); @@ -132951,7 +139872,7 @@ static i8 wherePathSatisfiesOrderBy( if( pIndex ){ iColumn = pIndex->aiColumn[j]; revIdx = pIndex->aSortOrder[j]; - if( iColumn==pIndex->pTable->iPKey ) iColumn = -1; + if( iColumn==pIndex->pTable->iPKey ) iColumn = XN_ROWID; }else{ iColumn = XN_ROWID; revIdx = 0; @@ -132978,20 +139899,21 @@ static i8 wherePathSatisfiesOrderBy( testcase( wctrlFlags & WHERE_GROUPBY ); testcase( wctrlFlags & WHERE_DISTINCTBY ); if( (wctrlFlags & (WHERE_GROUPBY|WHERE_DISTINCTBY))==0 ) bOnce = 0; - if( iColumn>=(-1) ){ + if( iColumn>=XN_ROWID ){ if( pOBExpr->op!=TK_COLUMN ) continue; if( pOBExpr->iTable!=iCur ) continue; if( pOBExpr->iColumn!=iColumn ) continue; }else{ - if( sqlite3ExprCompare(pOBExpr,pIndex->aColExpr->a[j].pExpr,iCur) ){ + Expr *pIdxExpr = pIndex->aColExpr->a[j].pExpr; + if( sqlite3ExprCompareSkip(pOBExpr, pIdxExpr, iCur) ){ continue; } } - if( iColumn>=0 ){ - pColl = sqlite3ExprCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); - if( !pColl ) pColl = db->pDfltColl; + if( iColumn!=XN_ROWID ){ + pColl = sqlite3ExprNNCollSeq(pWInfo->pParse, pOrderBy->a[i].pExpr); if( sqlite3StrICmp(pColl->zName, pIndex->azColl[j])!=0 ) continue; } + pLoop->u.btree.nIdxCol = j+1; isMatch = 1; break; } @@ -133248,12 +140170,15 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ if( (pWLoop->prereq & ~pFrom->maskLoop)!=0 ) continue; if( (pWLoop->maskSelf & pFrom->maskLoop)!=0 ) continue; - if( (pWLoop->wsFlags & WHERE_AUTO_INDEX)!=0 && pFrom->nRow<10 ){ + if( (pWLoop->wsFlags & WHERE_AUTO_INDEX)!=0 && pFrom->nRow<3 ){ /* Do not use an automatic index if the this loop is expected - ** to run less than 2 times. */ + ** to run less than 1.25 times. It is tempting to also exclude + ** automatic index usage on an outer loop, but sometimes an automatic + ** index is useful in the outer loop of a correlated subquery. */ assert( 10==sqlite3LogEst(2) ); continue; } + /* At this point, pWLoop is a candidate to be the next loop. ** Compute its cost */ rUnsorted = sqlite3LogEstAdd(pWLoop->rSetup,pWLoop->rRun + pFrom->nRow); @@ -133281,6 +140206,7 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ rUnsorted, rCost)); }else{ rCost = rUnsorted; + rUnsorted -= 2; /* TUNING: Slight bias in favor of no-sort plans */ } /* Check to see if pWLoop should be added to the set of @@ -133312,8 +140238,8 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ ** this candidate as not viable. */ #ifdef WHERETRACE_ENABLED /* 0x4 */ if( sqlite3WhereTrace&0x4 ){ - sqlite3DebugPrintf("Skip %s cost=%-3d,%3d order=%c\n", - wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, + sqlite3DebugPrintf("Skip %s cost=%-3d,%3d,%3d order=%c\n", + wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted, isOrdered>=0 ? isOrdered+'0' : '?'); } #endif @@ -133331,26 +140257,36 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ pTo = &aTo[jj]; #ifdef WHERETRACE_ENABLED /* 0x4 */ if( sqlite3WhereTrace&0x4 ){ - sqlite3DebugPrintf("New %s cost=%-3d,%3d order=%c\n", - wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, + sqlite3DebugPrintf("New %s cost=%-3d,%3d,%3d order=%c\n", + wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted, isOrdered>=0 ? isOrdered+'0' : '?'); } #endif }else{ /* Control reaches here if best-so-far path pTo=aTo[jj] covers the - ** same set of loops and has the sam isOrdered setting as the + ** same set of loops and has the same isOrdered setting as the ** candidate path. Check to see if the candidate should replace - ** pTo or if the candidate should be skipped */ - if( pTo->rCost<rCost || (pTo->rCost==rCost && pTo->nRow<=nOut) ){ + ** pTo or if the candidate should be skipped. + ** + ** The conditional is an expanded vector comparison equivalent to: + ** (pTo->rCost,pTo->nRow,pTo->rUnsorted) <= (rCost,nOut,rUnsorted) + */ + if( pTo->rCost<rCost + || (pTo->rCost==rCost + && (pTo->nRow<nOut + || (pTo->nRow==nOut && pTo->rUnsorted<=rUnsorted) + ) + ) + ){ #ifdef WHERETRACE_ENABLED /* 0x4 */ if( sqlite3WhereTrace&0x4 ){ sqlite3DebugPrintf( - "Skip %s cost=%-3d,%3d order=%c", - wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, + "Skip %s cost=%-3d,%3d,%3d order=%c", + wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted, isOrdered>=0 ? isOrdered+'0' : '?'); - sqlite3DebugPrintf(" vs %s cost=%-3d,%d order=%c\n", + sqlite3DebugPrintf(" vs %s cost=%-3d,%3d,%3d order=%c\n", wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow, - pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); + pTo->rUnsorted, pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); } #endif /* Discard the candidate path from further consideration */ @@ -133363,12 +140299,12 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ #ifdef WHERETRACE_ENABLED /* 0x4 */ if( sqlite3WhereTrace&0x4 ){ sqlite3DebugPrintf( - "Update %s cost=%-3d,%3d order=%c", - wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, + "Update %s cost=%-3d,%3d,%3d order=%c", + wherePathName(pFrom, iLoop, pWLoop), rCost, nOut, rUnsorted, isOrdered>=0 ? isOrdered+'0' : '?'); - sqlite3DebugPrintf(" was %s cost=%-3d,%3d order=%c\n", + sqlite3DebugPrintf(" was %s cost=%-3d,%3d,%3d order=%c\n", wherePathName(pTo, iLoop+1, 0), pTo->rCost, pTo->nRow, - pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); + pTo->rUnsorted, pTo->isOrdered>=0 ? pTo->isOrdered+'0' : '?'); } #endif } @@ -133423,7 +140359,7 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ if( nFrom==0 ){ sqlite3ErrorMsg(pParse, "no query solution"); - sqlite3DbFree(db, pSpace); + sqlite3DbFreeNN(db, pSpace); return SQLITE_ERROR; } @@ -133446,9 +140382,9 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ && nRowEst ){ Bitmask notUsed; - int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pDistinctSet, pFrom, + int rc = wherePathSatisfiesOrderBy(pWInfo, pWInfo->pResultSet, pFrom, WHERE_DISTINCTBY, nLoop-1, pFrom->aLoop[nLoop-1], ¬Used); - if( rc==pWInfo->pDistinctSet->nExpr ){ + if( rc==pWInfo->pResultSet->nExpr ){ pWInfo->eDistinct = WHERE_DISTINCT_ORDERED; } } @@ -133499,7 +140435,7 @@ static int wherePathSolver(WhereInfo *pWInfo, LogEst nRowEst){ pWInfo->nRowOut = pFrom->nRow; /* Free temporary memory and return success */ - sqlite3DbFree(db, pSpace); + sqlite3DbFreeNN(db, pSpace); return SQLITE_OK; } @@ -133577,7 +140513,8 @@ static int whereShortCut(WhereLoopBuilder *pBuilder){ if( pLoop->wsFlags ){ pLoop->nOut = (LogEst)1; pWInfo->a[0].pWLoop = pLoop; - pLoop->maskSelf = sqlite3WhereGetMask(&pWInfo->sMaskSet, iCur); + assert( pWInfo->sMaskSet.n==1 && iCur==pWInfo->sMaskSet.ix[0] ); + pLoop->maskSelf = 1; /* sqlite3WhereGetMask(&pWInfo->sMaskSet, iCur); */ pWInfo->a[0].iTabCur = iCur; pWInfo->nRowOut = 1; if( pWInfo->pOrderBy ) pWInfo->nOBSat = pWInfo->pOrderBy->nExpr; @@ -133593,6 +140530,32 @@ static int whereShortCut(WhereLoopBuilder *pBuilder){ } /* +** Helper function for exprIsDeterministic(). +*/ +static int exprNodeIsDeterministic(Walker *pWalker, Expr *pExpr){ + if( pExpr->op==TK_FUNCTION && ExprHasProperty(pExpr, EP_ConstFunc)==0 ){ + pWalker->eCode = 0; + return WRC_Abort; + } + return WRC_Continue; +} + +/* +** Return true if the expression contains no non-deterministic SQL +** functions. Do not consider non-deterministic SQL functions that are +** part of sub-select statements. +*/ +static int exprIsDeterministic(Expr *p){ + Walker w; + memset(&w, 0, sizeof(w)); + w.eCode = 1; + w.xExprCallback = exprNodeIsDeterministic; + w.xSelectCallback = sqlite3SelectWalkFail; + sqlite3WalkExpr(&w, p); + return w.eCode; +} + +/* ** Generate the beginning of the loop used for WHERE clause processing. ** The return value is a pointer to an opaque structure that contains ** information needed to terminate the loop. Later, the calling routine @@ -133685,7 +140648,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( SrcList *pTabList, /* FROM clause: A list of all tables to be scanned */ Expr *pWhere, /* The WHERE clause */ ExprList *pOrderBy, /* An ORDER BY (or GROUP BY) clause, or NULL */ - ExprList *pDistinctSet, /* Try not to output two rows that duplicate these */ + ExprList *pResultSet, /* Query result set. Req'd for DISTINCT */ u16 wctrlFlags, /* The WHERE_* flags defined in sqliteInt.h */ int iAuxArg /* If WHERE_OR_SUBCLAUSE is set, index cursor number ** If WHERE_USE_LIMIT, then the limit amount */ @@ -133761,7 +140724,8 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( pWInfo->pParse = pParse; pWInfo->pTabList = pTabList; pWInfo->pOrderBy = pOrderBy; - pWInfo->pDistinctSet = pDistinctSet; + pWInfo->pWhere = pWhere; + pWInfo->pResultSet = pResultSet; pWInfo->aiCurOnePass[0] = pWInfo->aiCurOnePass[1] = -1; pWInfo->nLevel = nTabList; pWInfo->iBreak = pWInfo->iContinue = sqlite3VdbeMakeLabel(v); @@ -133789,17 +140753,6 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( sqlite3WhereClauseInit(&pWInfo->sWC, pWInfo); sqlite3WhereSplit(&pWInfo->sWC, pWhere, TK_AND); - /* Special case: a WHERE clause that is constant. Evaluate the - ** expression and either jump over all of the code or fall thru. - */ - for(ii=0; ii<sWLB.pWC->nTerm; ii++){ - if( nTabList==0 || sqlite3ExprIsConstantNotJoin(sWLB.pWC->a[ii].pExpr) ){ - sqlite3ExprIfFalse(pParse, sWLB.pWC->a[ii].pExpr, pWInfo->iBreak, - SQLITE_JUMPIFNULL); - sWLB.pWC->a[ii].wtFlags |= TERM_CODED; - } - } - /* Special case: No FROM clause */ if( nTabList==0 ){ @@ -133807,45 +140760,71 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( if( wctrlFlags & WHERE_WANT_DISTINCT ){ pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; } + ExplainQueryPlan((pParse, 0, "SCAN CONSTANT ROW")); + }else{ + /* Assign a bit from the bitmask to every term in the FROM clause. + ** + ** The N-th term of the FROM clause is assigned a bitmask of 1<<N. + ** + ** The rule of the previous sentence ensures thta if X is the bitmask for + ** a table T, then X-1 is the bitmask for all other tables to the left of T. + ** Knowing the bitmask for all tables to the left of a left join is + ** important. Ticket #3015. + ** + ** Note that bitmasks are created for all pTabList->nSrc tables in + ** pTabList, not just the first nTabList tables. nTabList is normally + ** equal to pTabList->nSrc but might be shortened to 1 if the + ** WHERE_OR_SUBCLAUSE flag is set. + */ + ii = 0; + do{ + createMask(pMaskSet, pTabList->a[ii].iCursor); + sqlite3WhereTabFuncArgs(pParse, &pTabList->a[ii], &pWInfo->sWC); + }while( (++ii)<pTabList->nSrc ); + #ifdef SQLITE_DEBUG + { + Bitmask mx = 0; + for(ii=0; ii<pTabList->nSrc; ii++){ + Bitmask m = sqlite3WhereGetMask(pMaskSet, pTabList->a[ii].iCursor); + assert( m>=mx ); + mx = m; + } + } + #endif } + + /* Analyze all of the subexpressions. */ + sqlite3WhereExprAnalyze(pTabList, &pWInfo->sWC); + if( db->mallocFailed ) goto whereBeginError; - /* Assign a bit from the bitmask to every term in the FROM clause. + /* Special case: WHERE terms that do not refer to any tables in the join + ** (constant expressions). Evaluate each such term, and jump over all the + ** generated code if the result is not true. ** - ** The N-th term of the FROM clause is assigned a bitmask of 1<<N. + ** Do not do this if the expression contains non-deterministic functions + ** that are not within a sub-select. This is not strictly required, but + ** preserves SQLite's legacy behaviour in the following two cases: ** - ** The rule of the previous sentence ensures thta if X is the bitmask for - ** a table T, then X-1 is the bitmask for all other tables to the left of T. - ** Knowing the bitmask for all tables to the left of a left join is - ** important. Ticket #3015. - ** - ** Note that bitmasks are created for all pTabList->nSrc tables in - ** pTabList, not just the first nTabList tables. nTabList is normally - ** equal to pTabList->nSrc but might be shortened to 1 if the - ** WHERE_OR_SUBCLAUSE flag is set. + ** FROM ... WHERE random()>0; -- eval random() once per row + ** FROM ... WHERE (SELECT random())>0; -- eval random() once overall */ - for(ii=0; ii<pTabList->nSrc; ii++){ - createMask(pMaskSet, pTabList->a[ii].iCursor); - sqlite3WhereTabFuncArgs(pParse, &pTabList->a[ii], &pWInfo->sWC); - } -#ifdef SQLITE_DEBUG - for(ii=0; ii<pTabList->nSrc; ii++){ - Bitmask m = sqlite3WhereGetMask(pMaskSet, pTabList->a[ii].iCursor); - assert( m==MASKBIT(ii) ); + for(ii=0; ii<sWLB.pWC->nTerm; ii++){ + WhereTerm *pT = &sWLB.pWC->a[ii]; + if( pT->wtFlags & TERM_VIRTUAL ) continue; + if( pT->prereqAll==0 && (nTabList==0 || exprIsDeterministic(pT->pExpr)) ){ + sqlite3ExprIfFalse(pParse, pT->pExpr, pWInfo->iBreak, SQLITE_JUMPIFNULL); + pT->wtFlags |= TERM_CODED; + } } -#endif - - /* Analyze all of the subexpressions. */ - sqlite3WhereExprAnalyze(pTabList, &pWInfo->sWC); - if( db->mallocFailed ) goto whereBeginError; if( wctrlFlags & WHERE_WANT_DISTINCT ){ - if( isDistinctRedundant(pParse, pTabList, &pWInfo->sWC, pDistinctSet) ){ + if( isDistinctRedundant(pParse, pTabList, &pWInfo->sWC, pResultSet) ){ /* The DISTINCT marking is pointless. Ignore it. */ pWInfo->eDistinct = WHERE_DISTINCT_UNIQUE; }else if( pOrderBy==0 ){ /* Try to ORDER BY the result set to make distinct processing easier */ pWInfo->wctrlFlags |= WHERE_DISTINCTBY; - pWInfo->pOrderBy = pDistinctSet; + pWInfo->pOrderBy = pResultSet; } } @@ -133874,7 +140853,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( static const char zLabel[] = "0123456789abcdefghijklmnopqrstuvwyxz" "ABCDEFGHIJKLMNOPQRSTUVWYXZ"; for(p=pWInfo->pLoops, i=0; p; p=p->pNextLoop, i++){ - p->cId = zLabel[i%sizeof(zLabel)]; + p->cId = zLabel[i%(sizeof(zLabel)-1)]; whereLoopPrint(p, sWLB.pWC); } } @@ -133919,35 +140898,80 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( } } #endif - /* Attempt to omit tables from the join that do not effect the result */ + + /* Attempt to omit tables from the join that do not affect the result. + ** For a table to not affect the result, the following must be true: + ** + ** 1) The query must not be an aggregate. + ** 2) The table must be the RHS of a LEFT JOIN. + ** 3) Either the query must be DISTINCT, or else the ON or USING clause + ** must contain a constraint that limits the scan of the table to + ** at most a single row. + ** 4) The table must not be referenced by any part of the query apart + ** from its own USING or ON clause. + ** + ** For example, given: + ** + ** CREATE TABLE t1(ipk INTEGER PRIMARY KEY, v1); + ** CREATE TABLE t2(ipk INTEGER PRIMARY KEY, v2); + ** CREATE TABLE t3(ipk INTEGER PRIMARY KEY, v3); + ** + ** then table t2 can be omitted from the following: + ** + ** SELECT v1, v3 FROM t1 + ** LEFT JOIN t2 USING (t1.ipk=t2.ipk) + ** LEFT JOIN t3 USING (t1.ipk=t3.ipk) + ** + ** or from: + ** + ** SELECT DISTINCT v1, v3 FROM t1 + ** LEFT JOIN t2 + ** LEFT JOIN t3 USING (t1.ipk=t3.ipk) + */ + notReady = ~(Bitmask)0; if( pWInfo->nLevel>=2 - && pDistinctSet!=0 + && pResultSet!=0 /* guarantees condition (1) above */ && OptimizationEnabled(db, SQLITE_OmitNoopJoin) ){ - Bitmask tabUsed = sqlite3WhereExprListUsage(pMaskSet, pDistinctSet); + int i; + Bitmask tabUsed = sqlite3WhereExprListUsage(pMaskSet, pResultSet); if( sWLB.pOrderBy ){ tabUsed |= sqlite3WhereExprListUsage(pMaskSet, sWLB.pOrderBy); } - while( pWInfo->nLevel>=2 ){ + for(i=pWInfo->nLevel-1; i>=1; i--){ WhereTerm *pTerm, *pEnd; - pLoop = pWInfo->a[pWInfo->nLevel-1].pWLoop; - if( (pWInfo->pTabList->a[pLoop->iTab].fg.jointype & JT_LEFT)==0 ) break; + struct SrcList_item *pItem; + pLoop = pWInfo->a[i].pWLoop; + pItem = &pWInfo->pTabList->a[pLoop->iTab]; + if( (pItem->fg.jointype & JT_LEFT)==0 ) continue; if( (wctrlFlags & WHERE_WANT_DISTINCT)==0 && (pLoop->wsFlags & WHERE_ONEROW)==0 ){ - break; + continue; } - if( (tabUsed & pLoop->maskSelf)!=0 ) break; + if( (tabUsed & pLoop->maskSelf)!=0 ) continue; pEnd = sWLB.pWC->a + sWLB.pWC->nTerm; for(pTerm=sWLB.pWC->a; pTerm<pEnd; pTerm++){ - if( (pTerm->prereqAll & pLoop->maskSelf)!=0 - && !ExprHasProperty(pTerm->pExpr, EP_FromJoin) - ){ - break; + if( (pTerm->prereqAll & pLoop->maskSelf)!=0 ){ + if( !ExprHasProperty(pTerm->pExpr, EP_FromJoin) + || pTerm->pExpr->iRightJoinTable!=pItem->iCursor + ){ + break; + } } } - if( pTerm<pEnd ) break; + if( pTerm<pEnd ) continue; WHERETRACE(0xffff, ("-> drop loop %c not used\n", pLoop->cId)); + notReady &= ~pLoop->maskSelf; + for(pTerm=sWLB.pWC->a; pTerm<pEnd; pTerm++){ + if( (pTerm->prereqAll & pLoop->maskSelf)!=0 ){ + pTerm->wtFlags |= TERM_CODED; + } + } + if( i!=pWInfo->nLevel-1 ){ + int nByte = (pWInfo->nLevel-1-i) * sizeof(WhereLevel); + memmove(&pWInfo->a[i], &pWInfo->a[i+1], nByte); + } pWInfo->nLevel--; nTabList--; } @@ -133957,15 +140981,32 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( /* If the caller is an UPDATE or DELETE statement that is requesting ** to use a one-pass algorithm, determine if this is appropriate. + ** + ** A one-pass approach can be used if the caller has requested one + ** and either (a) the scan visits at most one row or (b) each + ** of the following are true: + ** + ** * the caller has indicated that a one-pass approach can be used + ** with multiple rows (by setting WHERE_ONEPASS_MULTIROW), and + ** * the table is not a virtual table, and + ** * either the scan does not use the OR optimization or the caller + ** is a DELETE operation (WHERE_DUPLICATES_OK is only specified + ** for DELETE). + ** + ** The last qualification is because an UPDATE statement uses + ** WhereInfo.aiCurOnePass[1] to determine whether or not it really can + ** use a one-pass approach, and this is not set accurately for scans + ** that use the OR optimization. */ assert( (wctrlFlags & WHERE_ONEPASS_DESIRED)==0 || pWInfo->nLevel==1 ); if( (wctrlFlags & WHERE_ONEPASS_DESIRED)!=0 ){ int wsFlags = pWInfo->a[0].pWLoop->wsFlags; int bOnerow = (wsFlags & WHERE_ONEROW)!=0; - if( bOnerow - || ((wctrlFlags & WHERE_ONEPASS_MULTIROW)!=0 - && 0==(wsFlags & WHERE_VIRTUALTABLE)) - ){ + if( bOnerow || ( + 0!=(wctrlFlags & WHERE_ONEPASS_MULTIROW) + && 0==(wsFlags & WHERE_VIRTUALTABLE) + && (0==(wsFlags & WHERE_MULTI_OR) || (wctrlFlags & WHERE_DUPLICATES_OK)) + )){ pWInfo->eOnePass = bOnerow ? ONEPASS_SINGLE : ONEPASS_MULTI; if( HasRowid(pTabList->a[0].pTab) && (wsFlags & WHERE_IDX_ONLY) ){ if( wctrlFlags & WHERE_ONEPASS_MULTIROW ){ @@ -134037,7 +141078,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( Index *pIx = pLoop->u.btree.pIndex; int iIndexCur; int op = OP_OpenRead; - /* iAuxArg is always set if to a positive value if ONEPASS is possible */ + /* iAuxArg is always set to a positive value if ONEPASS is possible */ assert( iAuxArg!=0 || (pWInfo->wctrlFlags & WHERE_ONEPASS_DESIRED)==0 ); if( !HasRowid(pTab) && IsPrimaryKeyIndex(pIx) && (wctrlFlags & WHERE_OR_SUBCLAUSE)!=0 @@ -134071,6 +141112,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( if( (pLoop->wsFlags & WHERE_CONSTRAINT)!=0 && (pLoop->wsFlags & (WHERE_COLUMN_RANGE|WHERE_SKIPSCAN))==0 && (pWInfo->wctrlFlags&WHERE_ORDERBY_MIN)==0 + && pWInfo->eDistinct!=WHERE_DISTINCT_ORDERED ){ sqlite3VdbeChangeP5(v, OPFLAG_SEEKEQ); /* Hint to COMDB2 */ } @@ -134101,7 +141143,6 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( ** loop below generates code for a single nested loop of the VM ** program. */ - notReady = ~(Bitmask)0; for(ii=0; ii<nTabList; ii++){ int addrExplain; int wsFlags; @@ -134115,7 +141156,7 @@ SQLITE_PRIVATE WhereInfo *sqlite3WhereBegin( } #endif addrExplain = sqlite3WhereExplainOneScan( - pParse, pTabList, pLevel, ii, pLevel->iFrom, wctrlFlags + pParse, pTabList, pLevel, wctrlFlags ); pLevel->addrBody = sqlite3VdbeCurrentAddr(v); notReady = sqlite3WhereCodeOneLoopStart(pWInfo, ii, notReady); @@ -134159,14 +141200,44 @@ SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ int addr; pLevel = &pWInfo->a[i]; pLoop = pLevel->pWLoop; - sqlite3VdbeResolveLabel(v, pLevel->addrCont); if( pLevel->op!=OP_Noop ){ +#ifndef SQLITE_DISABLE_SKIPAHEAD_DISTINCT + int addrSeek = 0; + Index *pIdx; + int n; + if( pWInfo->eDistinct==WHERE_DISTINCT_ORDERED + && i==pWInfo->nLevel-1 /* Ticket [ef9318757b152e3] 2017-10-21 */ + && (pLoop->wsFlags & WHERE_INDEXED)!=0 + && (pIdx = pLoop->u.btree.pIndex)->hasStat1 + && (n = pLoop->u.btree.nIdxCol)>0 + && pIdx->aiRowLogEst[n]>=36 + ){ + int r1 = pParse->nMem+1; + int j, op; + for(j=0; j<n; j++){ + sqlite3VdbeAddOp3(v, OP_Column, pLevel->iIdxCur, j, r1+j); + } + pParse->nMem += n+1; + op = pLevel->op==OP_Prev ? OP_SeekLT : OP_SeekGT; + addrSeek = sqlite3VdbeAddOp4Int(v, op, pLevel->iIdxCur, 0, r1, n); + VdbeCoverageIf(v, op==OP_SeekLT); + VdbeCoverageIf(v, op==OP_SeekGT); + sqlite3VdbeAddOp2(v, OP_Goto, 1, pLevel->p2); + } +#endif /* SQLITE_DISABLE_SKIPAHEAD_DISTINCT */ + /* The common case: Advance to the next row */ + sqlite3VdbeResolveLabel(v, pLevel->addrCont); sqlite3VdbeAddOp3(v, pLevel->op, pLevel->p1, pLevel->p2, pLevel->p3); sqlite3VdbeChangeP5(v, pLevel->p5); VdbeCoverage(v); VdbeCoverageIf(v, pLevel->op==OP_Next); VdbeCoverageIf(v, pLevel->op==OP_Prev); VdbeCoverageIf(v, pLevel->op==OP_VNext); +#ifndef SQLITE_DISABLE_SKIPAHEAD_DISTINCT + if( addrSeek ) sqlite3VdbeJumpHere(v, addrSeek); +#endif + }else{ + sqlite3VdbeResolveLabel(v, pLevel->addrCont); } if( pLoop->wsFlags & WHERE_IN_ABLE && pLevel->u.in.nIn>0 ){ struct InLoop *pIn; @@ -134202,7 +141273,8 @@ SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ addr = sqlite3VdbeAddOp1(v, OP_IfPos, pLevel->iLeftJoin); VdbeCoverage(v); assert( (ws & WHERE_IDX_ONLY)==0 || (ws & WHERE_INDEXED)!=0 ); if( (ws & WHERE_IDX_ONLY)==0 ){ - sqlite3VdbeAddOp1(v, OP_NullRow, pTabList->a[i].iCursor); + assert( pLevel->iTabCur==pTabList->a[pLevel->iFrom].iCursor ); + sqlite3VdbeAddOp1(v, OP_NullRow, pLevel->iTabCur); } if( (ws & WHERE_INDEXED) || ((ws & WHERE_MULTI_OR) && pLevel->u.pCovidx) @@ -134239,8 +141311,9 @@ SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ ** the co-routine into OP_Copy of result contained in a register. ** OP_Rowid becomes OP_Null. */ - if( pTabItem->fg.viaCoroutine && !db->mallocFailed ){ - translateColumnToCopy(v, pLevel->addrBody, pLevel->iTabCur, + if( pTabItem->fg.viaCoroutine ){ + testcase( pParse->db->mallocFailed ); + translateColumnToCopy(pParse, pLevel->addrBody, pLevel->iTabCur, pTabItem->regResult, 0); continue; } @@ -134270,7 +141343,11 @@ SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ pOp = sqlite3VdbeGetOp(v, k); for(; k<last; k++, pOp++){ if( pOp->p1!=pLevel->iTabCur ) continue; - if( pOp->opcode==OP_Column ){ + if( pOp->opcode==OP_Column +#ifdef SQLITE_ENABLE_OFFSET_SQL_FUNC + || pOp->opcode==OP_Offset +#endif + ){ int x = pOp->p2; assert( pIdx->pTable==pTab ); if( !HasRowid(pTab) ){ @@ -134288,6 +141365,8 @@ SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ }else if( pOp->opcode==OP_Rowid ){ pOp->p1 = pLevel->iIdxCur; pOp->opcode = OP_IdxRowid; + }else if( pOp->opcode==OP_IfNullRow ){ + pOp->p1 = pLevel->iIdxCur; } } } @@ -134368,15 +141447,6 @@ SQLITE_PRIVATE void sqlite3WhereEnd(WhereInfo *pWInfo){ #define YYMALLOCARGTYPE u64 /* -** An instance of this structure holds information about the -** LIMIT clause of a SELECT statement. -*/ -struct LimitVal { - Expr *pLimit; /* The LIMIT expression. NULL if there is no limit */ - Expr *pOffset; /* The OFFSET expression. NULL if there is none */ -}; - -/* ** An instance of the following structure describes the event of a ** TRIGGER. "a" is the event type, one of TK_UPDATE, TK_INSERT, ** TK_DELETE, or TK_INSTEAD. If the event is of the form @@ -134419,20 +141489,12 @@ static void disableLookaside(Parse *pParse){ } } - /* This is a utility routine used to set the ExprSpan.zStart and - ** ExprSpan.zEnd values of pOut so that the span covers the complete - ** range of text beginning with pStart and going to the end of pEnd. - */ - static void spanSet(ExprSpan *pOut, Token *pStart, Token *pEnd){ - pOut->zStart = pStart->z; - pOut->zEnd = &pEnd->z[pEnd->n]; - } /* Construct a new Expr object from a single identifier. Use the ** new Expr to populate pOut. Set the span of pOut to be the identifier ** that created the expression. */ - static void spanExpr(ExprSpan *pOut, Parse *pParse, int op, Token t){ + static Expr *tokenExpr(Parse *pParse, int op, Token t){ Expr *p = sqlite3DbMallocRawNN(pParse->db, sizeof(Expr)+t.n+1); if( p ){ memset(p, 0, sizeof(Expr)); @@ -134450,45 +141512,9 @@ static void disableLookaside(Parse *pParse){ p->nHeight = 1; #endif } - pOut->pExpr = p; - pOut->zStart = t.z; - pOut->zEnd = &t.z[t.n]; - } - - /* This routine constructs a binary expression node out of two ExprSpan - ** objects and uses the result to populate a new ExprSpan object. - */ - static void spanBinaryExpr( - Parse *pParse, /* The parsing context. Errors accumulate here */ - int op, /* The binary operation */ - ExprSpan *pLeft, /* The left operand, and output */ - ExprSpan *pRight /* The right operand */ - ){ - pLeft->pExpr = sqlite3PExpr(pParse, op, pLeft->pExpr, pRight->pExpr); - pLeft->zEnd = pRight->zEnd; - } - - /* If doNot is true, then add a TK_NOT Expr-node wrapper around the - ** outside of *ppExpr. - */ - static void exprNot(Parse *pParse, int doNot, ExprSpan *pSpan){ - if( doNot ){ - pSpan->pExpr = sqlite3PExpr(pParse, TK_NOT, pSpan->pExpr, 0); - } + return p; } - /* Construct an expression node for a unary postfix operator - */ - static void spanUnaryPostfix( - Parse *pParse, /* Parsing context to record errors */ - int op, /* The operator */ - ExprSpan *pOperand, /* The operand, and output */ - Token *pPostOp /* The operand token for setting the span */ - ){ - pOperand->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0); - pOperand->zEnd = &pPostOp->z[pPostOp->n]; - } - /* A routine to convert a binary TK_IS or TK_ISNOT expression into a ** unary TK_ISNULL or TK_NOTNULL expression. */ static void binaryToUnaryIfNull(Parse *pParse, Expr *pY, Expr *pA, int op){ @@ -134500,20 +141526,6 @@ static void disableLookaside(Parse *pParse){ } } - /* Construct an expression node for a unary prefix operator - */ - static void spanUnaryPrefix( - ExprSpan *pOut, /* Write the new expression node here */ - Parse *pParse, /* Parsing context to record errors */ - int op, /* The operator */ - ExprSpan *pOperand, /* The operand */ - Token *pPreOp /* The operand token for setting the span */ - ){ - pOut->zStart = pPreOp->z; - pOut->pExpr = sqlite3PExpr(pParse, op, pOperand->pExpr, 0); - pOut->zEnd = pOperand->zEnd; - } - /* Add a single new term to an ExprList that is used to store a ** list of identifiers. Report an error if the ID list contains ** a COLLATE clause or an ASC or DESC keyword, except ignore the @@ -134576,63 +141588,74 @@ static void disableLookaside(Parse *pParse){ ** zero the stack is dynamically sized using realloc() ** sqlite3ParserARG_SDECL A static variable declaration for the %extra_argument ** sqlite3ParserARG_PDECL A parameter declaration for the %extra_argument +** sqlite3ParserARG_PARAM Code to pass %extra_argument as a subroutine parameter ** sqlite3ParserARG_STORE Code to store %extra_argument into yypParser ** sqlite3ParserARG_FETCH Code to extract %extra_argument from yypParser +** sqlite3ParserCTX_* As sqlite3ParserARG_ except for %extra_context ** YYERRORSYMBOL is the code number of the error symbol. If not ** defined, then do no error processing. ** YYNSTATE the combined number of states. ** YYNRULE the number of rules in the grammar +** YYNTOKEN Number of terminal symbols ** YY_MAX_SHIFT Maximum value for shift actions ** YY_MIN_SHIFTREDUCE Minimum value for shift-reduce actions ** YY_MAX_SHIFTREDUCE Maximum value for shift-reduce actions -** YY_MIN_REDUCE Maximum value for reduce actions ** YY_ERROR_ACTION The yy_action[] code for syntax error ** YY_ACCEPT_ACTION The yy_action[] code for accept ** YY_NO_ACTION The yy_action[] code for no-op +** YY_MIN_REDUCE Minimum value for reduce actions +** YY_MAX_REDUCE Maximum value for reduce actions */ #ifndef INTERFACE # define INTERFACE 1 #endif /************* Begin control #defines *****************************************/ #define YYCODETYPE unsigned char -#define YYNOCODE 252 +#define YYNOCODE 255 #define YYACTIONTYPE unsigned short int -#define YYWILDCARD 96 +#define YYWILDCARD 84 #define sqlite3ParserTOKENTYPE Token typedef union { int yyinit; sqlite3ParserTOKENTYPE yy0; - Expr* yy72; - TriggerStep* yy145; - ExprList* yy148; - SrcList* yy185; - ExprSpan yy190; - int yy194; - Select* yy243; - IdList* yy254; - With* yy285; - struct TrigEvent yy332; - struct LimitVal yy354; - struct {int value; int mask;} yy497; + const char* yy36; + TriggerStep* yy47; + With* yy91; + struct {int value; int mask;} yy107; + Expr* yy182; + Upsert* yy198; + ExprList* yy232; + struct TrigEvent yy300; + Select* yy399; + SrcList* yy427; + int yy502; + IdList* yy510; } YYMINORTYPE; #ifndef YYSTACKDEPTH #define YYSTACKDEPTH 100 #endif -#define sqlite3ParserARG_SDECL Parse *pParse; -#define sqlite3ParserARG_PDECL ,Parse *pParse -#define sqlite3ParserARG_FETCH Parse *pParse = yypParser->pParse -#define sqlite3ParserARG_STORE yypParser->pParse = pParse +#define sqlite3ParserARG_SDECL +#define sqlite3ParserARG_PDECL +#define sqlite3ParserARG_PARAM +#define sqlite3ParserARG_FETCH +#define sqlite3ParserARG_STORE +#define sqlite3ParserCTX_SDECL Parse *pParse; +#define sqlite3ParserCTX_PDECL ,Parse *pParse +#define sqlite3ParserCTX_PARAM ,pParse +#define sqlite3ParserCTX_FETCH Parse *pParse=yypParser->pParse; +#define sqlite3ParserCTX_STORE yypParser->pParse=pParse; #define YYFALLBACK 1 -#define YYNSTATE 456 -#define YYNRULE 332 -#define YY_MAX_SHIFT 455 -#define YY_MIN_SHIFTREDUCE 668 -#define YY_MAX_SHIFTREDUCE 999 -#define YY_MIN_REDUCE 1000 -#define YY_MAX_REDUCE 1331 -#define YY_ERROR_ACTION 1332 -#define YY_ACCEPT_ACTION 1333 -#define YY_NO_ACTION 1334 +#define YYNSTATE 490 +#define YYNRULE 341 +#define YYNTOKEN 145 +#define YY_MAX_SHIFT 489 +#define YY_MIN_SHIFTREDUCE 705 +#define YY_MAX_SHIFTREDUCE 1045 +#define YY_ERROR_ACTION 1046 +#define YY_ACCEPT_ACTION 1047 +#define YY_NO_ACTION 1048 +#define YY_MIN_REDUCE 1049 +#define YY_MAX_REDUCE 1389 /************* End control #defines *******************************************/ /* Define the yytestcase() macro to be a no-op if is not already defined @@ -134662,9 +141685,6 @@ typedef union { ** N between YY_MIN_SHIFTREDUCE Shift to an arbitrary state then ** and YY_MAX_SHIFTREDUCE reduce by rule N-YY_MIN_SHIFTREDUCE. ** -** N between YY_MIN_REDUCE Reduce by rule N-YY_MIN_REDUCE -** and YY_MAX_REDUCE -** ** N == YY_ERROR_ACTION A syntax error has occurred. ** ** N == YY_ACCEPT_ACTION The parser accepts its input. @@ -134672,25 +141692,22 @@ typedef union { ** N == YY_NO_ACTION No such action. Denotes unused ** slots in the yy_action[] table. ** +** N between YY_MIN_REDUCE Reduce by rule N-YY_MIN_REDUCE +** and YY_MAX_REDUCE +** ** The action table is constructed as a single large table named yy_action[]. ** Given state S and lookahead X, the action is computed as either: ** ** (A) N = yy_action[ yy_shift_ofst[S] + X ] ** (B) N = yy_default[S] ** -** The (A) formula is preferred. The B formula is used instead if: -** (1) The yy_shift_ofst[S]+X value is out of range, or -** (2) yy_lookahead[yy_shift_ofst[S]+X] is not equal to X, or -** (3) yy_shift_ofst[S] equal YY_SHIFT_USE_DFLT. -** (Implementation note: YY_SHIFT_USE_DFLT is chosen so that -** YY_SHIFT_USE_DFLT+X will be out of range for all possible lookaheads X. -** Hence only tests (1) and (2) need to be evaluated.) +** The (A) formula is preferred. The B formula is used instead if +** yy_lookahead[yy_shift_ofst[S]+X] is not equal to X. ** ** The formulas above are for computing the action when the lookahead is ** a terminal symbol. If the lookahead is a non-terminal (as occurs after ** a reduce action) then the yy_reduce_ofst[] array is used in place of -** the yy_shift_ofst[] array and YY_REDUCE_USE_DFLT is used in place of -** YY_SHIFT_USE_DFLT. +** the yy_shift_ofst[] array. ** ** The following are the tables generated in this section: ** @@ -134704,463 +141721,503 @@ typedef union { ** yy_default[] Default action for each state. ** *********** Begin parsing tables **********************************************/ -#define YY_ACTTAB_COUNT (1567) +#define YY_ACTTAB_COUNT (1657) static const YYACTIONTYPE yy_action[] = { - /* 0 */ 325, 832, 351, 825, 5, 203, 203, 819, 99, 100, - /* 10 */ 90, 842, 842, 854, 857, 846, 846, 97, 97, 98, - /* 20 */ 98, 98, 98, 301, 96, 96, 96, 96, 95, 95, - /* 30 */ 94, 94, 94, 93, 351, 325, 977, 977, 824, 824, - /* 40 */ 826, 947, 354, 99, 100, 90, 842, 842, 854, 857, - /* 50 */ 846, 846, 97, 97, 98, 98, 98, 98, 338, 96, - /* 60 */ 96, 96, 96, 95, 95, 94, 94, 94, 93, 351, - /* 70 */ 95, 95, 94, 94, 94, 93, 351, 791, 977, 977, - /* 80 */ 325, 94, 94, 94, 93, 351, 792, 75, 99, 100, - /* 90 */ 90, 842, 842, 854, 857, 846, 846, 97, 97, 98, - /* 100 */ 98, 98, 98, 450, 96, 96, 96, 96, 95, 95, - /* 110 */ 94, 94, 94, 93, 351, 1333, 155, 155, 2, 325, - /* 120 */ 275, 146, 132, 52, 52, 93, 351, 99, 100, 90, - /* 130 */ 842, 842, 854, 857, 846, 846, 97, 97, 98, 98, - /* 140 */ 98, 98, 101, 96, 96, 96, 96, 95, 95, 94, - /* 150 */ 94, 94, 93, 351, 958, 958, 325, 268, 428, 413, - /* 160 */ 411, 61, 752, 752, 99, 100, 90, 842, 842, 854, - /* 170 */ 857, 846, 846, 97, 97, 98, 98, 98, 98, 60, - /* 180 */ 96, 96, 96, 96, 95, 95, 94, 94, 94, 93, - /* 190 */ 351, 325, 270, 329, 273, 277, 959, 960, 250, 99, - /* 200 */ 100, 90, 842, 842, 854, 857, 846, 846, 97, 97, - /* 210 */ 98, 98, 98, 98, 301, 96, 96, 96, 96, 95, - /* 220 */ 95, 94, 94, 94, 93, 351, 325, 938, 1326, 698, - /* 230 */ 706, 1326, 242, 412, 99, 100, 90, 842, 842, 854, - /* 240 */ 857, 846, 846, 97, 97, 98, 98, 98, 98, 347, - /* 250 */ 96, 96, 96, 96, 95, 95, 94, 94, 94, 93, - /* 260 */ 351, 325, 938, 1327, 384, 699, 1327, 381, 379, 99, - /* 270 */ 100, 90, 842, 842, 854, 857, 846, 846, 97, 97, - /* 280 */ 98, 98, 98, 98, 701, 96, 96, 96, 96, 95, - /* 290 */ 95, 94, 94, 94, 93, 351, 325, 92, 89, 178, - /* 300 */ 833, 936, 373, 700, 99, 100, 90, 842, 842, 854, - /* 310 */ 857, 846, 846, 97, 97, 98, 98, 98, 98, 375, - /* 320 */ 96, 96, 96, 96, 95, 95, 94, 94, 94, 93, - /* 330 */ 351, 325, 1276, 947, 354, 818, 936, 739, 739, 99, - /* 340 */ 100, 90, 842, 842, 854, 857, 846, 846, 97, 97, - /* 350 */ 98, 98, 98, 98, 230, 96, 96, 96, 96, 95, - /* 360 */ 95, 94, 94, 94, 93, 351, 325, 969, 227, 92, - /* 370 */ 89, 178, 373, 300, 99, 100, 90, 842, 842, 854, - /* 380 */ 857, 846, 846, 97, 97, 98, 98, 98, 98, 921, - /* 390 */ 96, 96, 96, 96, 95, 95, 94, 94, 94, 93, - /* 400 */ 351, 325, 449, 447, 447, 447, 147, 737, 737, 99, - /* 410 */ 100, 90, 842, 842, 854, 857, 846, 846, 97, 97, - /* 420 */ 98, 98, 98, 98, 296, 96, 96, 96, 96, 95, - /* 430 */ 95, 94, 94, 94, 93, 351, 325, 419, 231, 958, - /* 440 */ 958, 158, 25, 422, 99, 100, 90, 842, 842, 854, - /* 450 */ 857, 846, 846, 97, 97, 98, 98, 98, 98, 450, - /* 460 */ 96, 96, 96, 96, 95, 95, 94, 94, 94, 93, - /* 470 */ 351, 443, 224, 224, 420, 958, 958, 962, 325, 52, - /* 480 */ 52, 959, 960, 176, 415, 78, 99, 100, 90, 842, - /* 490 */ 842, 854, 857, 846, 846, 97, 97, 98, 98, 98, - /* 500 */ 98, 379, 96, 96, 96, 96, 95, 95, 94, 94, - /* 510 */ 94, 93, 351, 325, 428, 418, 298, 959, 960, 962, - /* 520 */ 81, 99, 88, 90, 842, 842, 854, 857, 846, 846, - /* 530 */ 97, 97, 98, 98, 98, 98, 717, 96, 96, 96, - /* 540 */ 96, 95, 95, 94, 94, 94, 93, 351, 325, 843, - /* 550 */ 843, 855, 858, 996, 318, 343, 379, 100, 90, 842, - /* 560 */ 842, 854, 857, 846, 846, 97, 97, 98, 98, 98, - /* 570 */ 98, 450, 96, 96, 96, 96, 95, 95, 94, 94, - /* 580 */ 94, 93, 351, 325, 350, 350, 350, 260, 377, 340, - /* 590 */ 929, 52, 52, 90, 842, 842, 854, 857, 846, 846, - /* 600 */ 97, 97, 98, 98, 98, 98, 361, 96, 96, 96, - /* 610 */ 96, 95, 95, 94, 94, 94, 93, 351, 86, 445, - /* 620 */ 847, 3, 1203, 361, 360, 378, 344, 813, 958, 958, - /* 630 */ 1300, 86, 445, 729, 3, 212, 169, 287, 405, 282, - /* 640 */ 404, 199, 232, 450, 300, 760, 83, 84, 280, 245, - /* 650 */ 262, 365, 251, 85, 352, 352, 92, 89, 178, 83, - /* 660 */ 84, 242, 412, 52, 52, 448, 85, 352, 352, 246, - /* 670 */ 959, 960, 194, 455, 670, 402, 399, 398, 448, 243, - /* 680 */ 221, 114, 434, 776, 361, 450, 397, 268, 747, 224, - /* 690 */ 224, 132, 132, 198, 832, 434, 452, 451, 428, 427, - /* 700 */ 819, 415, 734, 713, 132, 52, 52, 832, 268, 452, - /* 710 */ 451, 734, 194, 819, 363, 402, 399, 398, 450, 1271, - /* 720 */ 1271, 23, 958, 958, 86, 445, 397, 3, 228, 429, - /* 730 */ 895, 824, 824, 826, 827, 19, 203, 720, 52, 52, - /* 740 */ 428, 408, 439, 249, 824, 824, 826, 827, 19, 229, - /* 750 */ 403, 153, 83, 84, 761, 177, 241, 450, 721, 85, - /* 760 */ 352, 352, 120, 157, 959, 960, 58, 977, 409, 355, - /* 770 */ 330, 448, 268, 428, 430, 320, 790, 32, 32, 86, - /* 780 */ 445, 776, 3, 341, 98, 98, 98, 98, 434, 96, - /* 790 */ 96, 96, 96, 95, 95, 94, 94, 94, 93, 351, - /* 800 */ 832, 120, 452, 451, 813, 887, 819, 83, 84, 977, - /* 810 */ 813, 132, 410, 920, 85, 352, 352, 132, 407, 789, - /* 820 */ 958, 958, 92, 89, 178, 917, 448, 262, 370, 261, - /* 830 */ 82, 914, 80, 262, 370, 261, 776, 824, 824, 826, - /* 840 */ 827, 19, 934, 434, 96, 96, 96, 96, 95, 95, - /* 850 */ 94, 94, 94, 93, 351, 832, 74, 452, 451, 958, - /* 860 */ 958, 819, 959, 960, 120, 92, 89, 178, 945, 2, - /* 870 */ 918, 965, 268, 1, 976, 76, 445, 762, 3, 708, - /* 880 */ 901, 901, 387, 958, 958, 757, 919, 371, 740, 778, - /* 890 */ 756, 257, 824, 824, 826, 827, 19, 417, 741, 450, - /* 900 */ 24, 959, 960, 83, 84, 369, 958, 958, 177, 226, - /* 910 */ 85, 352, 352, 885, 315, 314, 313, 215, 311, 10, - /* 920 */ 10, 683, 448, 349, 348, 959, 960, 909, 777, 157, - /* 930 */ 120, 958, 958, 337, 776, 416, 711, 310, 450, 434, - /* 940 */ 450, 321, 450, 791, 103, 200, 175, 450, 959, 960, - /* 950 */ 908, 832, 792, 452, 451, 9, 9, 819, 10, 10, - /* 960 */ 52, 52, 51, 51, 180, 716, 248, 10, 10, 171, - /* 970 */ 170, 167, 339, 959, 960, 247, 984, 702, 702, 450, - /* 980 */ 715, 233, 686, 982, 889, 983, 182, 914, 824, 824, - /* 990 */ 826, 827, 19, 183, 256, 423, 132, 181, 394, 10, - /* 1000 */ 10, 889, 891, 749, 958, 958, 917, 268, 985, 198, - /* 1010 */ 985, 349, 348, 425, 415, 299, 817, 832, 326, 825, - /* 1020 */ 120, 332, 133, 819, 268, 98, 98, 98, 98, 91, - /* 1030 */ 96, 96, 96, 96, 95, 95, 94, 94, 94, 93, - /* 1040 */ 351, 157, 810, 371, 382, 359, 959, 960, 358, 268, - /* 1050 */ 450, 918, 368, 324, 824, 824, 826, 450, 709, 450, - /* 1060 */ 264, 380, 889, 450, 877, 746, 253, 919, 255, 433, - /* 1070 */ 36, 36, 234, 450, 234, 120, 269, 37, 37, 12, - /* 1080 */ 12, 334, 272, 27, 27, 450, 330, 118, 450, 162, - /* 1090 */ 742, 280, 450, 38, 38, 450, 985, 356, 985, 450, - /* 1100 */ 709, 1210, 450, 132, 450, 39, 39, 450, 40, 40, - /* 1110 */ 450, 362, 41, 41, 450, 42, 42, 450, 254, 28, - /* 1120 */ 28, 450, 29, 29, 31, 31, 450, 43, 43, 450, - /* 1130 */ 44, 44, 450, 714, 45, 45, 450, 11, 11, 767, - /* 1140 */ 450, 46, 46, 450, 268, 450, 105, 105, 450, 47, - /* 1150 */ 47, 450, 48, 48, 450, 237, 33, 33, 450, 172, - /* 1160 */ 49, 49, 450, 50, 50, 34, 34, 274, 122, 122, - /* 1170 */ 450, 123, 123, 450, 124, 124, 450, 898, 56, 56, - /* 1180 */ 450, 897, 35, 35, 450, 267, 450, 817, 450, 817, - /* 1190 */ 106, 106, 450, 53, 53, 385, 107, 107, 450, 817, - /* 1200 */ 108, 108, 817, 450, 104, 104, 121, 121, 119, 119, - /* 1210 */ 450, 117, 112, 112, 450, 276, 450, 225, 111, 111, - /* 1220 */ 450, 730, 450, 109, 109, 450, 673, 674, 675, 912, - /* 1230 */ 110, 110, 317, 998, 55, 55, 57, 57, 692, 331, - /* 1240 */ 54, 54, 26, 26, 696, 30, 30, 317, 937, 197, - /* 1250 */ 196, 195, 335, 281, 336, 446, 331, 745, 689, 436, - /* 1260 */ 440, 444, 120, 72, 386, 223, 175, 345, 757, 933, - /* 1270 */ 20, 286, 319, 756, 815, 372, 374, 202, 202, 202, - /* 1280 */ 263, 395, 285, 74, 208, 21, 696, 719, 718, 884, - /* 1290 */ 120, 120, 120, 120, 120, 754, 278, 828, 77, 74, - /* 1300 */ 726, 727, 785, 783, 880, 202, 999, 208, 894, 893, - /* 1310 */ 894, 893, 694, 816, 763, 116, 774, 1290, 431, 432, - /* 1320 */ 302, 999, 390, 303, 823, 697, 691, 680, 159, 289, - /* 1330 */ 679, 884, 681, 952, 291, 218, 293, 7, 316, 828, - /* 1340 */ 173, 805, 259, 364, 252, 911, 376, 713, 295, 435, - /* 1350 */ 308, 168, 955, 993, 135, 400, 990, 284, 882, 881, - /* 1360 */ 205, 928, 926, 59, 333, 62, 144, 156, 130, 72, - /* 1370 */ 802, 366, 367, 393, 137, 185, 189, 160, 139, 383, - /* 1380 */ 67, 896, 140, 141, 142, 148, 389, 812, 775, 266, - /* 1390 */ 219, 190, 154, 391, 913, 876, 271, 406, 191, 322, - /* 1400 */ 682, 733, 192, 342, 732, 724, 731, 711, 723, 421, - /* 1410 */ 705, 71, 323, 6, 204, 771, 288, 79, 297, 346, - /* 1420 */ 772, 704, 290, 283, 703, 770, 292, 294, 967, 239, - /* 1430 */ 769, 102, 862, 438, 426, 240, 424, 442, 73, 213, - /* 1440 */ 688, 238, 22, 453, 953, 214, 217, 216, 454, 677, - /* 1450 */ 676, 671, 753, 125, 115, 235, 126, 669, 353, 166, - /* 1460 */ 127, 244, 179, 357, 306, 304, 305, 307, 113, 892, - /* 1470 */ 327, 890, 811, 328, 134, 128, 136, 138, 743, 258, - /* 1480 */ 907, 184, 143, 129, 910, 186, 63, 64, 145, 187, - /* 1490 */ 906, 65, 8, 66, 13, 188, 202, 899, 265, 149, - /* 1500 */ 987, 388, 150, 685, 161, 392, 285, 193, 279, 396, - /* 1510 */ 151, 401, 68, 14, 15, 722, 69, 236, 831, 131, - /* 1520 */ 830, 860, 70, 751, 16, 414, 755, 4, 174, 220, - /* 1530 */ 222, 784, 201, 152, 779, 77, 74, 17, 18, 875, - /* 1540 */ 861, 859, 916, 864, 915, 207, 206, 942, 163, 437, - /* 1550 */ 948, 943, 164, 209, 1002, 441, 863, 165, 210, 829, - /* 1560 */ 695, 87, 312, 211, 1292, 1291, 309, + /* 0 */ 349, 99, 96, 185, 99, 96, 185, 233, 1047, 1, + /* 10 */ 1, 489, 2, 1051, 484, 477, 477, 477, 260, 351, + /* 20 */ 121, 1310, 1120, 1120, 1178, 1115, 1094, 1128, 380, 380, + /* 30 */ 380, 835, 454, 410, 1115, 59, 59, 1357, 425, 836, + /* 40 */ 710, 711, 712, 106, 107, 97, 1023, 1023, 900, 903, + /* 50 */ 892, 892, 104, 104, 105, 105, 105, 105, 346, 238, + /* 60 */ 238, 99, 96, 185, 238, 238, 889, 889, 901, 904, + /* 70 */ 460, 481, 351, 99, 96, 185, 481, 347, 1177, 82, + /* 80 */ 388, 214, 182, 23, 194, 103, 103, 103, 103, 102, + /* 90 */ 102, 101, 101, 101, 100, 381, 106, 107, 97, 1023, + /* 100 */ 1023, 900, 903, 892, 892, 104, 104, 105, 105, 105, + /* 110 */ 105, 10, 385, 484, 24, 484, 1333, 489, 2, 1051, + /* 120 */ 335, 1043, 108, 893, 260, 351, 121, 99, 96, 185, + /* 130 */ 100, 381, 386, 1128, 59, 59, 59, 59, 103, 103, + /* 140 */ 103, 103, 102, 102, 101, 101, 101, 100, 381, 106, + /* 150 */ 107, 97, 1023, 1023, 900, 903, 892, 892, 104, 104, + /* 160 */ 105, 105, 105, 105, 360, 238, 238, 170, 170, 467, + /* 170 */ 455, 467, 464, 67, 381, 329, 169, 481, 351, 343, + /* 180 */ 338, 400, 1044, 68, 101, 101, 101, 100, 381, 393, + /* 190 */ 194, 103, 103, 103, 103, 102, 102, 101, 101, 101, + /* 200 */ 100, 381, 106, 107, 97, 1023, 1023, 900, 903, 892, + /* 210 */ 892, 104, 104, 105, 105, 105, 105, 483, 385, 103, + /* 220 */ 103, 103, 103, 102, 102, 101, 101, 101, 100, 381, + /* 230 */ 268, 351, 946, 946, 422, 296, 102, 102, 101, 101, + /* 240 */ 101, 100, 381, 861, 103, 103, 103, 103, 102, 102, + /* 250 */ 101, 101, 101, 100, 381, 106, 107, 97, 1023, 1023, + /* 260 */ 900, 903, 892, 892, 104, 104, 105, 105, 105, 105, + /* 270 */ 484, 983, 1383, 206, 1353, 1383, 438, 435, 434, 281, + /* 280 */ 396, 269, 1089, 941, 351, 1002, 433, 861, 743, 401, + /* 290 */ 282, 57, 57, 482, 145, 791, 791, 103, 103, 103, + /* 300 */ 103, 102, 102, 101, 101, 101, 100, 381, 106, 107, + /* 310 */ 97, 1023, 1023, 900, 903, 892, 892, 104, 104, 105, + /* 320 */ 105, 105, 105, 281, 1002, 1003, 1004, 206, 879, 319, + /* 330 */ 438, 435, 434, 981, 259, 474, 360, 351, 1118, 1118, + /* 340 */ 433, 736, 379, 378, 872, 1002, 1356, 322, 871, 766, + /* 350 */ 103, 103, 103, 103, 102, 102, 101, 101, 101, 100, + /* 360 */ 381, 106, 107, 97, 1023, 1023, 900, 903, 892, 892, + /* 370 */ 104, 104, 105, 105, 105, 105, 484, 801, 484, 871, + /* 380 */ 871, 873, 401, 282, 1002, 1003, 1004, 1030, 360, 1030, + /* 390 */ 351, 983, 1384, 213, 880, 1384, 145, 59, 59, 59, + /* 400 */ 59, 1002, 244, 103, 103, 103, 103, 102, 102, 101, + /* 410 */ 101, 101, 100, 381, 106, 107, 97, 1023, 1023, 900, + /* 420 */ 903, 892, 892, 104, 104, 105, 105, 105, 105, 274, + /* 430 */ 484, 110, 467, 479, 467, 444, 259, 474, 232, 232, + /* 440 */ 1002, 1003, 1004, 351, 210, 335, 982, 866, 1385, 336, + /* 450 */ 481, 59, 59, 981, 245, 307, 103, 103, 103, 103, + /* 460 */ 102, 102, 101, 101, 101, 100, 381, 106, 107, 97, + /* 470 */ 1023, 1023, 900, 903, 892, 892, 104, 104, 105, 105, + /* 480 */ 105, 105, 453, 459, 484, 408, 377, 259, 474, 271, + /* 490 */ 183, 273, 209, 208, 207, 356, 351, 307, 178, 177, + /* 500 */ 127, 1006, 1098, 14, 14, 43, 43, 1044, 425, 103, + /* 510 */ 103, 103, 103, 102, 102, 101, 101, 101, 100, 381, + /* 520 */ 106, 107, 97, 1023, 1023, 900, 903, 892, 892, 104, + /* 530 */ 104, 105, 105, 105, 105, 294, 1132, 408, 160, 484, + /* 540 */ 408, 1006, 129, 962, 1209, 239, 239, 481, 307, 425, + /* 550 */ 1309, 1097, 351, 235, 243, 272, 820, 481, 963, 425, + /* 560 */ 11, 11, 103, 103, 103, 103, 102, 102, 101, 101, + /* 570 */ 101, 100, 381, 964, 362, 1002, 106, 107, 97, 1023, + /* 580 */ 1023, 900, 903, 892, 892, 104, 104, 105, 105, 105, + /* 590 */ 105, 1275, 161, 126, 777, 289, 1209, 292, 1072, 357, + /* 600 */ 1209, 1127, 476, 357, 778, 425, 247, 425, 351, 248, + /* 610 */ 414, 364, 414, 171, 1002, 1003, 1004, 84, 103, 103, + /* 620 */ 103, 103, 102, 102, 101, 101, 101, 100, 381, 1002, + /* 630 */ 184, 484, 106, 107, 97, 1023, 1023, 900, 903, 892, + /* 640 */ 892, 104, 104, 105, 105, 105, 105, 1123, 1209, 287, + /* 650 */ 484, 1209, 11, 11, 179, 820, 259, 474, 307, 237, + /* 660 */ 182, 351, 321, 365, 414, 308, 367, 366, 1002, 1003, + /* 670 */ 1004, 44, 44, 87, 103, 103, 103, 103, 102, 102, + /* 680 */ 101, 101, 101, 100, 381, 106, 107, 97, 1023, 1023, + /* 690 */ 900, 903, 892, 892, 104, 104, 105, 105, 105, 105, + /* 700 */ 246, 368, 280, 128, 10, 358, 146, 796, 835, 258, + /* 710 */ 1020, 88, 795, 86, 351, 421, 836, 943, 376, 348, + /* 720 */ 191, 943, 1318, 267, 308, 279, 456, 103, 103, 103, + /* 730 */ 103, 102, 102, 101, 101, 101, 100, 381, 106, 95, + /* 740 */ 97, 1023, 1023, 900, 903, 892, 892, 104, 104, 105, + /* 750 */ 105, 105, 105, 420, 249, 238, 238, 238, 238, 79, + /* 760 */ 375, 125, 305, 29, 262, 978, 351, 481, 337, 481, + /* 770 */ 756, 755, 304, 278, 415, 15, 81, 940, 1126, 940, + /* 780 */ 103, 103, 103, 103, 102, 102, 101, 101, 101, 100, + /* 790 */ 381, 107, 97, 1023, 1023, 900, 903, 892, 892, 104, + /* 800 */ 104, 105, 105, 105, 105, 457, 263, 484, 174, 484, + /* 810 */ 238, 238, 863, 407, 402, 216, 216, 351, 409, 193, + /* 820 */ 283, 216, 481, 81, 763, 764, 266, 5, 13, 13, + /* 830 */ 34, 34, 103, 103, 103, 103, 102, 102, 101, 101, + /* 840 */ 101, 100, 381, 97, 1023, 1023, 900, 903, 892, 892, + /* 850 */ 104, 104, 105, 105, 105, 105, 93, 475, 1002, 4, + /* 860 */ 403, 1002, 340, 431, 1002, 297, 212, 1277, 81, 746, + /* 870 */ 1163, 152, 926, 478, 166, 212, 757, 829, 930, 939, + /* 880 */ 216, 939, 858, 103, 103, 103, 103, 102, 102, 101, + /* 890 */ 101, 101, 100, 381, 238, 238, 382, 1002, 1003, 1004, + /* 900 */ 1002, 1003, 1004, 1002, 1003, 1004, 481, 439, 472, 746, + /* 910 */ 105, 105, 105, 105, 98, 758, 1162, 145, 930, 412, + /* 920 */ 879, 406, 793, 81, 395, 89, 90, 91, 105, 105, + /* 930 */ 105, 105, 1323, 92, 484, 382, 486, 485, 240, 275, + /* 940 */ 871, 103, 103, 103, 103, 102, 102, 101, 101, 101, + /* 950 */ 100, 381, 1096, 371, 355, 45, 45, 259, 474, 103, + /* 960 */ 103, 103, 103, 102, 102, 101, 101, 101, 100, 381, + /* 970 */ 1150, 871, 871, 873, 874, 21, 1332, 991, 384, 730, + /* 980 */ 722, 242, 123, 1298, 124, 875, 333, 333, 332, 227, + /* 990 */ 330, 991, 384, 719, 256, 242, 484, 391, 413, 1297, + /* 1000 */ 333, 333, 332, 227, 330, 748, 187, 719, 265, 470, + /* 1010 */ 1279, 1002, 484, 417, 391, 390, 264, 11, 11, 284, + /* 1020 */ 187, 732, 265, 93, 475, 875, 4, 1279, 1281, 419, + /* 1030 */ 264, 369, 416, 11, 11, 1159, 288, 484, 399, 1346, + /* 1040 */ 478, 379, 378, 291, 484, 293, 189, 250, 295, 1027, + /* 1050 */ 1002, 1003, 1004, 190, 1029, 1111, 140, 188, 11, 11, + /* 1060 */ 189, 732, 1028, 382, 923, 46, 46, 190, 1095, 230, + /* 1070 */ 140, 188, 462, 93, 475, 472, 4, 300, 309, 391, + /* 1080 */ 373, 6, 1069, 217, 739, 310, 1030, 879, 1030, 1171, + /* 1090 */ 478, 352, 1279, 90, 91, 800, 259, 474, 1208, 484, + /* 1100 */ 92, 1268, 382, 486, 485, 352, 1002, 871, 879, 426, + /* 1110 */ 259, 474, 172, 382, 238, 238, 1146, 170, 1021, 389, + /* 1120 */ 47, 47, 1157, 739, 872, 472, 481, 469, 871, 350, + /* 1130 */ 1214, 83, 475, 389, 4, 1078, 1071, 879, 871, 871, + /* 1140 */ 873, 874, 21, 90, 91, 1002, 1003, 1004, 478, 251, + /* 1150 */ 92, 251, 382, 486, 485, 443, 370, 871, 1021, 871, + /* 1160 */ 871, 873, 224, 241, 306, 441, 301, 440, 211, 1060, + /* 1170 */ 820, 382, 822, 447, 299, 1059, 484, 1061, 1143, 962, + /* 1180 */ 430, 796, 484, 472, 1340, 312, 795, 465, 871, 871, + /* 1190 */ 873, 874, 21, 314, 963, 879, 316, 59, 59, 1002, + /* 1200 */ 9, 90, 91, 48, 48, 238, 238, 210, 92, 964, + /* 1210 */ 382, 486, 485, 176, 334, 871, 242, 481, 1193, 238, + /* 1220 */ 238, 333, 333, 332, 227, 330, 394, 270, 719, 277, + /* 1230 */ 471, 481, 467, 466, 484, 145, 217, 1201, 1002, 1003, + /* 1240 */ 1004, 187, 3, 265, 184, 445, 871, 871, 873, 874, + /* 1250 */ 21, 264, 1337, 450, 1051, 39, 39, 392, 356, 260, + /* 1260 */ 342, 121, 468, 411, 436, 821, 180, 1094, 1128, 820, + /* 1270 */ 303, 1021, 1272, 1271, 299, 259, 474, 238, 238, 1002, + /* 1280 */ 473, 189, 484, 318, 327, 238, 238, 484, 190, 481, + /* 1290 */ 446, 140, 188, 1343, 238, 238, 1038, 481, 148, 175, + /* 1300 */ 238, 238, 484, 49, 49, 219, 481, 484, 35, 35, + /* 1310 */ 1317, 1021, 481, 484, 1035, 484, 1315, 484, 1002, 1003, + /* 1320 */ 1004, 484, 66, 36, 36, 194, 352, 484, 38, 38, + /* 1330 */ 484, 259, 474, 69, 50, 50, 51, 51, 52, 52, + /* 1340 */ 359, 484, 12, 12, 484, 1198, 484, 158, 53, 53, + /* 1350 */ 405, 112, 112, 385, 389, 484, 26, 484, 143, 484, + /* 1360 */ 150, 484, 54, 54, 397, 40, 40, 55, 55, 484, + /* 1370 */ 79, 484, 153, 1190, 484, 154, 56, 56, 41, 41, + /* 1380 */ 58, 58, 133, 133, 484, 398, 484, 429, 484, 155, + /* 1390 */ 134, 134, 135, 135, 484, 63, 63, 484, 341, 484, + /* 1400 */ 339, 484, 196, 484, 156, 42, 42, 113, 113, 60, + /* 1410 */ 60, 484, 404, 484, 27, 114, 114, 1204, 115, 115, + /* 1420 */ 111, 111, 132, 132, 131, 131, 1266, 418, 484, 162, + /* 1430 */ 484, 200, 119, 119, 118, 118, 484, 74, 424, 484, + /* 1440 */ 1286, 484, 231, 484, 202, 484, 167, 286, 427, 116, + /* 1450 */ 116, 117, 117, 290, 203, 442, 1062, 62, 62, 204, + /* 1460 */ 64, 64, 61, 61, 33, 33, 37, 37, 344, 372, + /* 1470 */ 1114, 1105, 748, 1113, 374, 1112, 254, 458, 1086, 255, + /* 1480 */ 345, 1085, 302, 1084, 1355, 78, 1154, 311, 1104, 449, + /* 1490 */ 452, 1155, 1153, 218, 7, 313, 315, 320, 1152, 85, + /* 1500 */ 1252, 317, 109, 80, 463, 225, 461, 1068, 25, 487, + /* 1510 */ 997, 323, 257, 226, 229, 228, 1136, 324, 325, 326, + /* 1520 */ 488, 136, 1057, 1052, 1302, 1303, 1301, 706, 1300, 137, + /* 1530 */ 122, 138, 383, 173, 1082, 261, 186, 252, 1081, 65, + /* 1540 */ 387, 120, 938, 936, 855, 353, 149, 1079, 139, 151, + /* 1550 */ 192, 780, 195, 276, 952, 157, 141, 361, 70, 363, + /* 1560 */ 859, 159, 71, 72, 142, 73, 955, 354, 147, 197, + /* 1570 */ 198, 951, 130, 16, 199, 285, 216, 1032, 201, 423, + /* 1580 */ 164, 944, 163, 28, 721, 428, 304, 165, 205, 759, + /* 1590 */ 75, 432, 298, 17, 18, 437, 76, 253, 878, 144, + /* 1600 */ 877, 906, 77, 986, 30, 448, 987, 31, 451, 181, + /* 1610 */ 234, 236, 168, 828, 823, 89, 910, 921, 81, 907, + /* 1620 */ 215, 905, 909, 961, 960, 19, 221, 20, 220, 22, + /* 1630 */ 32, 331, 876, 731, 94, 790, 794, 8, 992, 222, + /* 1640 */ 480, 328, 1048, 1048, 1048, 1048, 1048, 1048, 1048, 1048, + /* 1650 */ 223, 1048, 1048, 1048, 1048, 1348, 1347, }; static const YYCODETYPE yy_lookahead[] = { - /* 0 */ 19, 95, 53, 97, 22, 24, 24, 101, 27, 28, - /* 10 */ 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, - /* 20 */ 39, 40, 41, 152, 43, 44, 45, 46, 47, 48, - /* 30 */ 49, 50, 51, 52, 53, 19, 55, 55, 132, 133, - /* 40 */ 134, 1, 2, 27, 28, 29, 30, 31, 32, 33, - /* 50 */ 34, 35, 36, 37, 38, 39, 40, 41, 187, 43, - /* 60 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, - /* 70 */ 47, 48, 49, 50, 51, 52, 53, 61, 97, 97, - /* 80 */ 19, 49, 50, 51, 52, 53, 70, 26, 27, 28, - /* 90 */ 29, 30, 31, 32, 33, 34, 35, 36, 37, 38, - /* 100 */ 39, 40, 41, 152, 43, 44, 45, 46, 47, 48, - /* 110 */ 49, 50, 51, 52, 53, 144, 145, 146, 147, 19, - /* 120 */ 16, 22, 92, 172, 173, 52, 53, 27, 28, 29, - /* 130 */ 30, 31, 32, 33, 34, 35, 36, 37, 38, 39, - /* 140 */ 40, 41, 81, 43, 44, 45, 46, 47, 48, 49, - /* 150 */ 50, 51, 52, 53, 55, 56, 19, 152, 207, 208, - /* 160 */ 115, 24, 117, 118, 27, 28, 29, 30, 31, 32, - /* 170 */ 33, 34, 35, 36, 37, 38, 39, 40, 41, 79, - /* 180 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, - /* 190 */ 53, 19, 88, 157, 90, 23, 97, 98, 193, 27, - /* 200 */ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, - /* 210 */ 38, 39, 40, 41, 152, 43, 44, 45, 46, 47, - /* 220 */ 48, 49, 50, 51, 52, 53, 19, 22, 23, 172, - /* 230 */ 23, 26, 119, 120, 27, 28, 29, 30, 31, 32, - /* 240 */ 33, 34, 35, 36, 37, 38, 39, 40, 41, 187, - /* 250 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, - /* 260 */ 53, 19, 22, 23, 228, 23, 26, 231, 152, 27, - /* 270 */ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, - /* 280 */ 38, 39, 40, 41, 172, 43, 44, 45, 46, 47, - /* 290 */ 48, 49, 50, 51, 52, 53, 19, 221, 222, 223, - /* 300 */ 23, 96, 152, 172, 27, 28, 29, 30, 31, 32, - /* 310 */ 33, 34, 35, 36, 37, 38, 39, 40, 41, 152, - /* 320 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, - /* 330 */ 53, 19, 0, 1, 2, 23, 96, 190, 191, 27, - /* 340 */ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, - /* 350 */ 38, 39, 40, 41, 238, 43, 44, 45, 46, 47, - /* 360 */ 48, 49, 50, 51, 52, 53, 19, 185, 218, 221, - /* 370 */ 222, 223, 152, 152, 27, 28, 29, 30, 31, 32, - /* 380 */ 33, 34, 35, 36, 37, 38, 39, 40, 41, 241, - /* 390 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, - /* 400 */ 53, 19, 152, 168, 169, 170, 22, 190, 191, 27, - /* 410 */ 28, 29, 30, 31, 32, 33, 34, 35, 36, 37, - /* 420 */ 38, 39, 40, 41, 152, 43, 44, 45, 46, 47, - /* 430 */ 48, 49, 50, 51, 52, 53, 19, 19, 218, 55, - /* 440 */ 56, 24, 22, 152, 27, 28, 29, 30, 31, 32, - /* 450 */ 33, 34, 35, 36, 37, 38, 39, 40, 41, 152, - /* 460 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, - /* 470 */ 53, 250, 194, 195, 56, 55, 56, 55, 19, 172, - /* 480 */ 173, 97, 98, 152, 206, 138, 27, 28, 29, 30, - /* 490 */ 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, - /* 500 */ 41, 152, 43, 44, 45, 46, 47, 48, 49, 50, - /* 510 */ 51, 52, 53, 19, 207, 208, 152, 97, 98, 97, - /* 520 */ 138, 27, 28, 29, 30, 31, 32, 33, 34, 35, - /* 530 */ 36, 37, 38, 39, 40, 41, 181, 43, 44, 45, - /* 540 */ 46, 47, 48, 49, 50, 51, 52, 53, 19, 30, - /* 550 */ 31, 32, 33, 247, 248, 19, 152, 28, 29, 30, - /* 560 */ 31, 32, 33, 34, 35, 36, 37, 38, 39, 40, - /* 570 */ 41, 152, 43, 44, 45, 46, 47, 48, 49, 50, - /* 580 */ 51, 52, 53, 19, 168, 169, 170, 238, 19, 53, - /* 590 */ 152, 172, 173, 29, 30, 31, 32, 33, 34, 35, - /* 600 */ 36, 37, 38, 39, 40, 41, 152, 43, 44, 45, - /* 610 */ 46, 47, 48, 49, 50, 51, 52, 53, 19, 20, - /* 620 */ 101, 22, 23, 169, 170, 56, 207, 85, 55, 56, - /* 630 */ 23, 19, 20, 26, 22, 99, 100, 101, 102, 103, - /* 640 */ 104, 105, 238, 152, 152, 210, 47, 48, 112, 152, - /* 650 */ 108, 109, 110, 54, 55, 56, 221, 222, 223, 47, - /* 660 */ 48, 119, 120, 172, 173, 66, 54, 55, 56, 152, - /* 670 */ 97, 98, 99, 148, 149, 102, 103, 104, 66, 154, - /* 680 */ 23, 156, 83, 26, 230, 152, 113, 152, 163, 194, - /* 690 */ 195, 92, 92, 30, 95, 83, 97, 98, 207, 208, - /* 700 */ 101, 206, 179, 180, 92, 172, 173, 95, 152, 97, - /* 710 */ 98, 188, 99, 101, 219, 102, 103, 104, 152, 119, - /* 720 */ 120, 196, 55, 56, 19, 20, 113, 22, 193, 163, - /* 730 */ 11, 132, 133, 134, 135, 136, 24, 65, 172, 173, - /* 740 */ 207, 208, 250, 152, 132, 133, 134, 135, 136, 193, - /* 750 */ 78, 84, 47, 48, 49, 98, 199, 152, 86, 54, - /* 760 */ 55, 56, 196, 152, 97, 98, 209, 55, 163, 244, - /* 770 */ 107, 66, 152, 207, 208, 164, 175, 172, 173, 19, - /* 780 */ 20, 124, 22, 111, 38, 39, 40, 41, 83, 43, - /* 790 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, - /* 800 */ 95, 196, 97, 98, 85, 152, 101, 47, 48, 97, - /* 810 */ 85, 92, 207, 193, 54, 55, 56, 92, 49, 175, - /* 820 */ 55, 56, 221, 222, 223, 12, 66, 108, 109, 110, - /* 830 */ 137, 163, 139, 108, 109, 110, 26, 132, 133, 134, - /* 840 */ 135, 136, 152, 83, 43, 44, 45, 46, 47, 48, - /* 850 */ 49, 50, 51, 52, 53, 95, 26, 97, 98, 55, - /* 860 */ 56, 101, 97, 98, 196, 221, 222, 223, 146, 147, - /* 870 */ 57, 171, 152, 22, 26, 19, 20, 49, 22, 179, - /* 880 */ 108, 109, 110, 55, 56, 116, 73, 219, 75, 124, - /* 890 */ 121, 152, 132, 133, 134, 135, 136, 163, 85, 152, - /* 900 */ 232, 97, 98, 47, 48, 237, 55, 56, 98, 5, - /* 910 */ 54, 55, 56, 193, 10, 11, 12, 13, 14, 172, - /* 920 */ 173, 17, 66, 47, 48, 97, 98, 152, 124, 152, - /* 930 */ 196, 55, 56, 186, 124, 152, 106, 160, 152, 83, - /* 940 */ 152, 164, 152, 61, 22, 211, 212, 152, 97, 98, - /* 950 */ 152, 95, 70, 97, 98, 172, 173, 101, 172, 173, - /* 960 */ 172, 173, 172, 173, 60, 181, 62, 172, 173, 47, - /* 970 */ 48, 123, 186, 97, 98, 71, 100, 55, 56, 152, - /* 980 */ 181, 186, 21, 107, 152, 109, 82, 163, 132, 133, - /* 990 */ 134, 135, 136, 89, 16, 207, 92, 93, 19, 172, - /* 1000 */ 173, 169, 170, 195, 55, 56, 12, 152, 132, 30, - /* 1010 */ 134, 47, 48, 186, 206, 225, 152, 95, 114, 97, - /* 1020 */ 196, 245, 246, 101, 152, 38, 39, 40, 41, 42, - /* 1030 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, - /* 1040 */ 53, 152, 163, 219, 152, 141, 97, 98, 193, 152, - /* 1050 */ 152, 57, 91, 164, 132, 133, 134, 152, 55, 152, - /* 1060 */ 152, 237, 230, 152, 103, 193, 88, 73, 90, 75, - /* 1070 */ 172, 173, 183, 152, 185, 196, 152, 172, 173, 172, - /* 1080 */ 173, 217, 152, 172, 173, 152, 107, 22, 152, 24, - /* 1090 */ 193, 112, 152, 172, 173, 152, 132, 242, 134, 152, - /* 1100 */ 97, 140, 152, 92, 152, 172, 173, 152, 172, 173, - /* 1110 */ 152, 100, 172, 173, 152, 172, 173, 152, 140, 172, - /* 1120 */ 173, 152, 172, 173, 172, 173, 152, 172, 173, 152, - /* 1130 */ 172, 173, 152, 152, 172, 173, 152, 172, 173, 213, - /* 1140 */ 152, 172, 173, 152, 152, 152, 172, 173, 152, 172, - /* 1150 */ 173, 152, 172, 173, 152, 210, 172, 173, 152, 26, - /* 1160 */ 172, 173, 152, 172, 173, 172, 173, 152, 172, 173, - /* 1170 */ 152, 172, 173, 152, 172, 173, 152, 59, 172, 173, - /* 1180 */ 152, 63, 172, 173, 152, 193, 152, 152, 152, 152, - /* 1190 */ 172, 173, 152, 172, 173, 77, 172, 173, 152, 152, - /* 1200 */ 172, 173, 152, 152, 172, 173, 172, 173, 172, 173, - /* 1210 */ 152, 22, 172, 173, 152, 152, 152, 22, 172, 173, - /* 1220 */ 152, 152, 152, 172, 173, 152, 7, 8, 9, 163, - /* 1230 */ 172, 173, 22, 23, 172, 173, 172, 173, 166, 167, - /* 1240 */ 172, 173, 172, 173, 55, 172, 173, 22, 23, 108, - /* 1250 */ 109, 110, 217, 152, 217, 166, 167, 163, 163, 163, - /* 1260 */ 163, 163, 196, 130, 217, 211, 212, 217, 116, 23, - /* 1270 */ 22, 101, 26, 121, 23, 23, 23, 26, 26, 26, - /* 1280 */ 23, 23, 112, 26, 26, 37, 97, 100, 101, 55, - /* 1290 */ 196, 196, 196, 196, 196, 23, 23, 55, 26, 26, - /* 1300 */ 7, 8, 23, 152, 23, 26, 96, 26, 132, 132, - /* 1310 */ 134, 134, 23, 152, 152, 26, 152, 122, 152, 191, - /* 1320 */ 152, 96, 234, 152, 152, 152, 152, 152, 197, 210, - /* 1330 */ 152, 97, 152, 152, 210, 233, 210, 198, 150, 97, - /* 1340 */ 184, 201, 239, 214, 214, 201, 239, 180, 214, 227, - /* 1350 */ 200, 198, 155, 67, 243, 176, 69, 175, 175, 175, - /* 1360 */ 122, 159, 159, 240, 159, 240, 22, 220, 27, 130, - /* 1370 */ 201, 18, 159, 18, 189, 158, 158, 220, 192, 159, - /* 1380 */ 137, 236, 192, 192, 192, 189, 74, 189, 159, 235, - /* 1390 */ 159, 158, 22, 177, 201, 201, 159, 107, 158, 177, - /* 1400 */ 159, 174, 158, 76, 174, 182, 174, 106, 182, 125, - /* 1410 */ 174, 107, 177, 22, 159, 216, 215, 137, 159, 53, - /* 1420 */ 216, 176, 215, 174, 174, 216, 215, 215, 174, 229, - /* 1430 */ 216, 129, 224, 177, 126, 229, 127, 177, 128, 25, - /* 1440 */ 162, 226, 26, 161, 13, 153, 6, 153, 151, 151, - /* 1450 */ 151, 151, 205, 165, 178, 178, 165, 4, 3, 22, - /* 1460 */ 165, 142, 15, 94, 202, 204, 203, 201, 16, 23, - /* 1470 */ 249, 23, 120, 249, 246, 111, 131, 123, 20, 16, - /* 1480 */ 1, 125, 123, 111, 56, 64, 37, 37, 131, 122, - /* 1490 */ 1, 37, 5, 37, 22, 107, 26, 80, 140, 80, - /* 1500 */ 87, 72, 107, 20, 24, 19, 112, 105, 23, 79, - /* 1510 */ 22, 79, 22, 22, 22, 58, 22, 79, 23, 68, - /* 1520 */ 23, 23, 26, 116, 22, 26, 23, 22, 122, 23, - /* 1530 */ 23, 56, 64, 22, 124, 26, 26, 64, 64, 23, - /* 1540 */ 23, 23, 23, 11, 23, 22, 26, 23, 22, 24, - /* 1550 */ 1, 23, 22, 26, 251, 24, 23, 22, 122, 23, - /* 1560 */ 23, 22, 15, 122, 122, 122, 23, + /* 0 */ 174, 226, 227, 228, 226, 227, 228, 172, 145, 146, + /* 10 */ 147, 148, 149, 150, 153, 169, 170, 171, 155, 19, + /* 20 */ 157, 246, 192, 193, 177, 181, 182, 164, 169, 170, + /* 30 */ 171, 31, 164, 153, 190, 174, 175, 187, 153, 39, + /* 40 */ 7, 8, 9, 43, 44, 45, 46, 47, 48, 49, + /* 50 */ 50, 51, 52, 53, 54, 55, 56, 57, 174, 196, + /* 60 */ 197, 226, 227, 228, 196, 197, 46, 47, 48, 49, + /* 70 */ 209, 208, 19, 226, 227, 228, 208, 174, 177, 26, + /* 80 */ 195, 213, 214, 22, 221, 85, 86, 87, 88, 89, + /* 90 */ 90, 91, 92, 93, 94, 95, 43, 44, 45, 46, + /* 100 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, + /* 110 */ 57, 172, 249, 153, 53, 153, 147, 148, 149, 150, + /* 120 */ 22, 23, 69, 103, 155, 19, 157, 226, 227, 228, + /* 130 */ 94, 95, 247, 164, 174, 175, 174, 175, 85, 86, + /* 140 */ 87, 88, 89, 90, 91, 92, 93, 94, 95, 43, + /* 150 */ 44, 45, 46, 47, 48, 49, 50, 51, 52, 53, + /* 160 */ 54, 55, 56, 57, 153, 196, 197, 153, 153, 209, + /* 170 */ 210, 209, 210, 67, 95, 161, 237, 208, 19, 165, + /* 180 */ 165, 242, 84, 24, 91, 92, 93, 94, 95, 223, + /* 190 */ 221, 85, 86, 87, 88, 89, 90, 91, 92, 93, + /* 200 */ 94, 95, 43, 44, 45, 46, 47, 48, 49, 50, + /* 210 */ 51, 52, 53, 54, 55, 56, 57, 153, 249, 85, + /* 220 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + /* 230 */ 219, 19, 109, 110, 111, 23, 89, 90, 91, 92, + /* 240 */ 93, 94, 95, 73, 85, 86, 87, 88, 89, 90, + /* 250 */ 91, 92, 93, 94, 95, 43, 44, 45, 46, 47, + /* 260 */ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, + /* 270 */ 153, 22, 23, 101, 173, 26, 104, 105, 106, 109, + /* 280 */ 110, 111, 181, 11, 19, 59, 114, 73, 23, 110, + /* 290 */ 111, 174, 175, 116, 80, 118, 119, 85, 86, 87, + /* 300 */ 88, 89, 90, 91, 92, 93, 94, 95, 43, 44, + /* 310 */ 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, + /* 320 */ 55, 56, 57, 109, 98, 99, 100, 101, 83, 153, + /* 330 */ 104, 105, 106, 84, 120, 121, 153, 19, 192, 193, + /* 340 */ 114, 23, 89, 90, 99, 59, 23, 230, 103, 26, + /* 350 */ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, + /* 360 */ 95, 43, 44, 45, 46, 47, 48, 49, 50, 51, + /* 370 */ 52, 53, 54, 55, 56, 57, 153, 91, 153, 134, + /* 380 */ 135, 136, 110, 111, 98, 99, 100, 134, 153, 136, + /* 390 */ 19, 22, 23, 26, 23, 26, 80, 174, 175, 174, + /* 400 */ 175, 59, 219, 85, 86, 87, 88, 89, 90, 91, + /* 410 */ 92, 93, 94, 95, 43, 44, 45, 46, 47, 48, + /* 420 */ 49, 50, 51, 52, 53, 54, 55, 56, 57, 16, + /* 430 */ 153, 22, 209, 210, 209, 210, 120, 121, 196, 197, + /* 440 */ 98, 99, 100, 19, 46, 22, 23, 23, 252, 253, + /* 450 */ 208, 174, 175, 84, 219, 153, 85, 86, 87, 88, + /* 460 */ 89, 90, 91, 92, 93, 94, 95, 43, 44, 45, + /* 470 */ 46, 47, 48, 49, 50, 51, 52, 53, 54, 55, + /* 480 */ 56, 57, 153, 153, 153, 153, 209, 120, 121, 76, + /* 490 */ 153, 78, 109, 110, 111, 97, 19, 153, 89, 90, + /* 500 */ 198, 59, 183, 174, 175, 174, 175, 84, 153, 85, + /* 510 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + /* 520 */ 43, 44, 45, 46, 47, 48, 49, 50, 51, 52, + /* 530 */ 53, 54, 55, 56, 57, 16, 197, 153, 22, 153, + /* 540 */ 153, 99, 198, 12, 153, 196, 197, 208, 153, 153, + /* 550 */ 195, 183, 19, 23, 222, 142, 26, 208, 27, 153, + /* 560 */ 174, 175, 85, 86, 87, 88, 89, 90, 91, 92, + /* 570 */ 93, 94, 95, 42, 188, 59, 43, 44, 45, 46, + /* 580 */ 47, 48, 49, 50, 51, 52, 53, 54, 55, 56, + /* 590 */ 57, 195, 22, 198, 63, 76, 153, 78, 167, 168, + /* 600 */ 153, 195, 167, 168, 73, 153, 222, 153, 19, 222, + /* 610 */ 153, 220, 153, 24, 98, 99, 100, 140, 85, 86, + /* 620 */ 87, 88, 89, 90, 91, 92, 93, 94, 95, 59, + /* 630 */ 100, 153, 43, 44, 45, 46, 47, 48, 49, 50, + /* 640 */ 51, 52, 53, 54, 55, 56, 57, 195, 153, 195, + /* 650 */ 153, 153, 174, 175, 26, 125, 120, 121, 153, 213, + /* 660 */ 214, 19, 153, 220, 153, 153, 188, 220, 98, 99, + /* 670 */ 100, 174, 175, 140, 85, 86, 87, 88, 89, 90, + /* 680 */ 91, 92, 93, 94, 95, 43, 44, 45, 46, 47, + /* 690 */ 48, 49, 50, 51, 52, 53, 54, 55, 56, 57, + /* 700 */ 243, 189, 243, 198, 172, 250, 251, 117, 31, 201, + /* 710 */ 26, 139, 122, 141, 19, 220, 39, 29, 220, 211, + /* 720 */ 24, 33, 153, 164, 153, 164, 19, 85, 86, 87, + /* 730 */ 88, 89, 90, 91, 92, 93, 94, 95, 43, 44, + /* 740 */ 45, 46, 47, 48, 49, 50, 51, 52, 53, 54, + /* 750 */ 55, 56, 57, 65, 243, 196, 197, 196, 197, 131, + /* 760 */ 189, 22, 103, 24, 153, 23, 19, 208, 26, 208, + /* 770 */ 102, 103, 113, 23, 242, 22, 26, 134, 164, 136, + /* 780 */ 85, 86, 87, 88, 89, 90, 91, 92, 93, 94, + /* 790 */ 95, 44, 45, 46, 47, 48, 49, 50, 51, 52, + /* 800 */ 53, 54, 55, 56, 57, 98, 153, 153, 124, 153, + /* 810 */ 196, 197, 23, 23, 61, 26, 26, 19, 23, 123, + /* 820 */ 23, 26, 208, 26, 7, 8, 153, 22, 174, 175, + /* 830 */ 174, 175, 85, 86, 87, 88, 89, 90, 91, 92, + /* 840 */ 93, 94, 95, 45, 46, 47, 48, 49, 50, 51, + /* 850 */ 52, 53, 54, 55, 56, 57, 19, 20, 59, 22, + /* 860 */ 111, 59, 164, 23, 59, 23, 26, 153, 26, 59, + /* 870 */ 153, 72, 23, 36, 72, 26, 35, 23, 59, 134, + /* 880 */ 26, 136, 133, 85, 86, 87, 88, 89, 90, 91, + /* 890 */ 92, 93, 94, 95, 196, 197, 59, 98, 99, 100, + /* 900 */ 98, 99, 100, 98, 99, 100, 208, 66, 71, 99, + /* 910 */ 54, 55, 56, 57, 58, 74, 153, 80, 99, 19, + /* 920 */ 83, 223, 23, 26, 153, 26, 89, 90, 54, 55, + /* 930 */ 56, 57, 153, 96, 153, 98, 99, 100, 22, 153, + /* 940 */ 103, 85, 86, 87, 88, 89, 90, 91, 92, 93, + /* 950 */ 94, 95, 183, 112, 158, 174, 175, 120, 121, 85, + /* 960 */ 86, 87, 88, 89, 90, 91, 92, 93, 94, 95, + /* 970 */ 215, 134, 135, 136, 137, 138, 0, 1, 2, 23, + /* 980 */ 21, 5, 26, 153, 22, 59, 10, 11, 12, 13, + /* 990 */ 14, 1, 2, 17, 212, 5, 153, 153, 98, 153, + /* 1000 */ 10, 11, 12, 13, 14, 108, 30, 17, 32, 193, + /* 1010 */ 153, 59, 153, 153, 170, 171, 40, 174, 175, 153, + /* 1020 */ 30, 59, 32, 19, 20, 99, 22, 170, 171, 233, + /* 1030 */ 40, 188, 236, 174, 175, 153, 153, 153, 79, 123, + /* 1040 */ 36, 89, 90, 153, 153, 153, 70, 188, 153, 97, + /* 1050 */ 98, 99, 100, 77, 102, 153, 80, 81, 174, 175, + /* 1060 */ 70, 99, 110, 59, 105, 174, 175, 77, 153, 238, + /* 1070 */ 80, 81, 188, 19, 20, 71, 22, 153, 153, 235, + /* 1080 */ 19, 22, 164, 24, 59, 153, 134, 83, 136, 153, + /* 1090 */ 36, 115, 235, 89, 90, 91, 120, 121, 153, 153, + /* 1100 */ 96, 142, 98, 99, 100, 115, 59, 103, 83, 239, + /* 1110 */ 120, 121, 199, 59, 196, 197, 153, 153, 59, 143, + /* 1120 */ 174, 175, 153, 98, 99, 71, 208, 153, 103, 165, + /* 1130 */ 153, 19, 20, 143, 22, 153, 153, 83, 134, 135, + /* 1140 */ 136, 137, 138, 89, 90, 98, 99, 100, 36, 185, + /* 1150 */ 96, 187, 98, 99, 100, 91, 95, 103, 99, 134, + /* 1160 */ 135, 136, 101, 102, 103, 104, 105, 106, 107, 153, + /* 1170 */ 26, 59, 125, 164, 113, 153, 153, 153, 212, 12, + /* 1180 */ 19, 117, 153, 71, 153, 212, 122, 164, 134, 135, + /* 1190 */ 136, 137, 138, 212, 27, 83, 212, 174, 175, 59, + /* 1200 */ 200, 89, 90, 174, 175, 196, 197, 46, 96, 42, + /* 1210 */ 98, 99, 100, 172, 151, 103, 5, 208, 203, 196, + /* 1220 */ 197, 10, 11, 12, 13, 14, 216, 216, 17, 244, + /* 1230 */ 63, 208, 209, 210, 153, 80, 24, 203, 98, 99, + /* 1240 */ 100, 30, 22, 32, 100, 164, 134, 135, 136, 137, + /* 1250 */ 138, 40, 148, 164, 150, 174, 175, 102, 97, 155, + /* 1260 */ 203, 157, 164, 244, 178, 125, 186, 182, 164, 125, + /* 1270 */ 177, 59, 177, 177, 113, 120, 121, 196, 197, 59, + /* 1280 */ 232, 70, 153, 216, 202, 196, 197, 153, 77, 208, + /* 1290 */ 209, 80, 81, 156, 196, 197, 60, 208, 248, 200, + /* 1300 */ 196, 197, 153, 174, 175, 123, 208, 153, 174, 175, + /* 1310 */ 160, 99, 208, 153, 38, 153, 160, 153, 98, 99, + /* 1320 */ 100, 153, 245, 174, 175, 221, 115, 153, 174, 175, + /* 1330 */ 153, 120, 121, 245, 174, 175, 174, 175, 174, 175, + /* 1340 */ 160, 153, 174, 175, 153, 225, 153, 22, 174, 175, + /* 1350 */ 97, 174, 175, 249, 143, 153, 224, 153, 43, 153, + /* 1360 */ 191, 153, 174, 175, 18, 174, 175, 174, 175, 153, + /* 1370 */ 131, 153, 194, 203, 153, 194, 174, 175, 174, 175, + /* 1380 */ 174, 175, 174, 175, 153, 160, 153, 18, 153, 194, + /* 1390 */ 174, 175, 174, 175, 153, 174, 175, 153, 225, 153, + /* 1400 */ 203, 153, 159, 153, 194, 174, 175, 174, 175, 174, + /* 1410 */ 175, 153, 203, 153, 224, 174, 175, 191, 174, 175, + /* 1420 */ 174, 175, 174, 175, 174, 175, 203, 160, 153, 191, + /* 1430 */ 153, 159, 174, 175, 174, 175, 153, 139, 62, 153, + /* 1440 */ 241, 153, 160, 153, 159, 153, 22, 240, 179, 174, + /* 1450 */ 175, 174, 175, 160, 159, 97, 160, 174, 175, 159, + /* 1460 */ 174, 175, 174, 175, 174, 175, 174, 175, 179, 64, + /* 1470 */ 176, 184, 108, 176, 95, 176, 234, 126, 176, 234, + /* 1480 */ 179, 178, 176, 176, 176, 97, 218, 217, 184, 179, + /* 1490 */ 179, 218, 218, 160, 22, 217, 217, 160, 218, 139, + /* 1500 */ 229, 217, 130, 129, 127, 25, 128, 163, 26, 162, + /* 1510 */ 13, 206, 231, 154, 6, 154, 207, 205, 204, 203, + /* 1520 */ 152, 166, 152, 152, 172, 172, 172, 4, 172, 166, + /* 1530 */ 180, 166, 3, 22, 172, 144, 15, 180, 172, 172, + /* 1540 */ 82, 16, 23, 23, 121, 254, 132, 172, 112, 124, + /* 1550 */ 24, 20, 126, 16, 1, 124, 112, 61, 53, 37, + /* 1560 */ 133, 132, 53, 53, 112, 53, 98, 254, 251, 34, + /* 1570 */ 123, 1, 5, 22, 97, 142, 26, 75, 123, 41, + /* 1580 */ 97, 68, 68, 24, 20, 19, 113, 22, 107, 28, + /* 1590 */ 22, 67, 23, 22, 22, 67, 22, 67, 23, 37, + /* 1600 */ 23, 23, 26, 23, 22, 24, 23, 22, 24, 123, + /* 1610 */ 23, 23, 22, 98, 125, 26, 11, 23, 26, 23, + /* 1620 */ 34, 23, 23, 23, 23, 34, 22, 34, 26, 22, + /* 1630 */ 22, 15, 23, 23, 22, 117, 23, 22, 1, 123, + /* 1640 */ 26, 23, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1650 */ 123, 255, 255, 255, 255, 123, 123, 255, 255, 255, + /* 1660 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1670 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1680 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1690 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1700 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1710 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1720 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1730 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1740 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1750 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1760 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1770 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1780 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1790 */ 255, 255, 255, 255, 255, 255, 255, 255, 255, 255, + /* 1800 */ 255, 255, }; -#define YY_SHIFT_USE_DFLT (1567) -#define YY_SHIFT_COUNT (455) -#define YY_SHIFT_MIN (-94) -#define YY_SHIFT_MAX (1549) -static const short yy_shift_ofst[] = { - /* 0 */ 40, 599, 904, 612, 760, 760, 760, 760, 725, -19, - /* 10 */ 16, 16, 100, 760, 760, 760, 760, 760, 760, 760, - /* 20 */ 876, 876, 573, 542, 719, 600, 61, 137, 172, 207, - /* 30 */ 242, 277, 312, 347, 382, 417, 459, 459, 459, 459, - /* 40 */ 459, 459, 459, 459, 459, 459, 459, 459, 459, 459, - /* 50 */ 459, 459, 459, 494, 459, 529, 564, 564, 705, 760, - /* 60 */ 760, 760, 760, 760, 760, 760, 760, 760, 760, 760, - /* 70 */ 760, 760, 760, 760, 760, 760, 760, 760, 760, 760, - /* 80 */ 760, 760, 760, 760, 760, 760, 760, 760, 760, 760, - /* 90 */ 856, 760, 760, 760, 760, 760, 760, 760, 760, 760, - /* 100 */ 760, 760, 760, 760, 987, 746, 746, 746, 746, 746, - /* 110 */ 801, 23, 32, 949, 961, 979, 964, 964, 949, 73, - /* 120 */ 113, -51, 1567, 1567, 1567, 536, 536, 536, 99, 99, - /* 130 */ 813, 813, 667, 205, 240, 949, 949, 949, 949, 949, - /* 140 */ 949, 949, 949, 949, 949, 949, 949, 949, 949, 949, - /* 150 */ 949, 949, 949, 949, 949, 332, 1011, 422, 422, 113, - /* 160 */ 30, 30, 30, 30, 30, 30, 1567, 1567, 1567, 922, - /* 170 */ -94, -94, 384, 613, 828, 420, 765, 804, 851, 949, - /* 180 */ 949, 949, 949, 949, 949, 949, 949, 949, 949, 949, - /* 190 */ 949, 949, 949, 949, 949, 672, 672, 672, 949, 949, - /* 200 */ 657, 949, 949, 949, -18, 949, 949, 994, 949, 949, - /* 210 */ 949, 949, 949, 949, 949, 949, 949, 949, 772, 1118, - /* 220 */ 712, 712, 712, 810, 45, 769, 1219, 1133, 418, 418, - /* 230 */ 569, 1133, 569, 830, 607, 663, 882, 418, 693, 882, - /* 240 */ 882, 848, 1152, 1065, 1286, 1238, 1238, 1287, 1287, 1238, - /* 250 */ 1344, 1341, 1239, 1353, 1353, 1353, 1353, 1238, 1355, 1239, - /* 260 */ 1344, 1341, 1341, 1239, 1238, 1355, 1243, 1312, 1238, 1238, - /* 270 */ 1355, 1370, 1238, 1355, 1238, 1355, 1370, 1290, 1290, 1290, - /* 280 */ 1327, 1370, 1290, 1301, 1290, 1327, 1290, 1290, 1284, 1304, - /* 290 */ 1284, 1304, 1284, 1304, 1284, 1304, 1238, 1391, 1238, 1280, - /* 300 */ 1370, 1366, 1366, 1370, 1302, 1308, 1310, 1309, 1239, 1414, - /* 310 */ 1416, 1431, 1431, 1440, 1440, 1440, 1440, 1567, 1567, 1567, - /* 320 */ 1567, 1567, 1567, 1567, 1567, 519, 978, 1210, 1225, 104, - /* 330 */ 1141, 1189, 1246, 1248, 1251, 1252, 1253, 1257, 1258, 1273, - /* 340 */ 1003, 1187, 1293, 1170, 1272, 1279, 1234, 1281, 1176, 1177, - /* 350 */ 1289, 1242, 1195, 1453, 1455, 1437, 1319, 1447, 1369, 1452, - /* 360 */ 1446, 1448, 1352, 1345, 1364, 1354, 1458, 1356, 1463, 1479, - /* 370 */ 1359, 1357, 1449, 1450, 1454, 1456, 1372, 1428, 1421, 1367, - /* 380 */ 1489, 1487, 1472, 1388, 1358, 1417, 1470, 1419, 1413, 1429, - /* 390 */ 1395, 1480, 1483, 1486, 1394, 1402, 1488, 1430, 1490, 1491, - /* 400 */ 1485, 1492, 1432, 1457, 1494, 1438, 1451, 1495, 1497, 1498, - /* 410 */ 1496, 1407, 1502, 1503, 1505, 1499, 1406, 1506, 1507, 1475, - /* 420 */ 1468, 1511, 1410, 1509, 1473, 1510, 1474, 1516, 1509, 1517, - /* 430 */ 1518, 1519, 1520, 1521, 1523, 1532, 1524, 1526, 1525, 1527, - /* 440 */ 1528, 1530, 1531, 1527, 1533, 1535, 1536, 1537, 1539, 1436, - /* 450 */ 1441, 1442, 1443, 1543, 1547, 1549, +#define YY_SHIFT_COUNT (489) +#define YY_SHIFT_MIN (0) +#define YY_SHIFT_MAX (1637) +static const unsigned short int yy_shift_ofst[] = { + /* 0 */ 990, 976, 1211, 837, 837, 316, 1054, 1054, 1054, 1054, + /* 10 */ 214, 0, 0, 106, 642, 1054, 1054, 1054, 1054, 1054, + /* 20 */ 1054, 1054, 1054, 952, 952, 226, 1155, 316, 316, 316, + /* 30 */ 316, 316, 316, 53, 159, 212, 265, 318, 371, 424, + /* 40 */ 477, 533, 589, 642, 642, 642, 642, 642, 642, 642, + /* 50 */ 642, 642, 642, 642, 642, 642, 642, 642, 642, 642, + /* 60 */ 695, 642, 747, 798, 798, 1004, 1054, 1054, 1054, 1054, + /* 70 */ 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, + /* 80 */ 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, + /* 90 */ 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1112, 1054, 1054, + /* 100 */ 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, 1054, + /* 110 */ 1054, 856, 874, 874, 874, 874, 874, 134, 147, 93, + /* 120 */ 342, 959, 1161, 253, 253, 342, 367, 367, 367, 367, + /* 130 */ 179, 36, 79, 1657, 1657, 1657, 1061, 1061, 1061, 516, + /* 140 */ 799, 516, 516, 531, 531, 802, 249, 369, 342, 342, + /* 150 */ 342, 342, 342, 342, 342, 342, 342, 342, 342, 342, + /* 160 */ 342, 342, 342, 342, 342, 342, 342, 342, 342, 272, + /* 170 */ 442, 442, 536, 1657, 1657, 1657, 1025, 245, 245, 570, + /* 180 */ 172, 286, 805, 1047, 1140, 1220, 342, 342, 342, 342, + /* 190 */ 342, 342, 342, 342, 170, 342, 342, 342, 342, 342, + /* 200 */ 342, 342, 342, 342, 342, 342, 342, 841, 841, 841, + /* 210 */ 342, 342, 342, 342, 530, 342, 342, 342, 1059, 342, + /* 220 */ 342, 1167, 342, 342, 342, 342, 342, 342, 342, 342, + /* 230 */ 123, 688, 177, 1212, 1212, 1212, 1212, 1144, 177, 177, + /* 240 */ 1064, 409, 33, 628, 707, 707, 900, 628, 628, 900, + /* 250 */ 897, 323, 398, 677, 677, 677, 707, 572, 684, 590, + /* 260 */ 739, 1236, 1182, 1182, 1276, 1276, 1182, 1253, 1325, 1315, + /* 270 */ 1239, 1346, 1346, 1346, 1346, 1182, 1369, 1239, 1239, 1253, + /* 280 */ 1325, 1315, 1315, 1239, 1182, 1369, 1298, 1376, 1182, 1369, + /* 290 */ 1424, 1182, 1369, 1182, 1369, 1424, 1358, 1358, 1358, 1405, + /* 300 */ 1424, 1358, 1364, 1358, 1405, 1358, 1358, 1424, 1379, 1379, + /* 310 */ 1424, 1351, 1388, 1351, 1388, 1351, 1388, 1351, 1388, 1182, + /* 320 */ 1472, 1182, 1360, 1372, 1377, 1374, 1378, 1239, 1480, 1482, + /* 330 */ 1497, 1497, 1508, 1508, 1508, 1657, 1657, 1657, 1657, 1657, + /* 340 */ 1657, 1657, 1657, 1657, 1657, 1657, 1657, 1657, 1657, 1657, + /* 350 */ 1657, 20, 413, 98, 423, 519, 383, 962, 742, 61, + /* 360 */ 696, 749, 750, 753, 789, 790, 795, 797, 840, 842, + /* 370 */ 810, 668, 817, 659, 819, 849, 854, 899, 643, 745, + /* 380 */ 956, 926, 916, 1523, 1529, 1511, 1391, 1521, 1458, 1525, + /* 390 */ 1519, 1520, 1423, 1414, 1436, 1526, 1425, 1531, 1426, 1537, + /* 400 */ 1553, 1431, 1427, 1444, 1496, 1522, 1429, 1505, 1509, 1510, + /* 410 */ 1512, 1452, 1468, 1535, 1447, 1570, 1567, 1551, 1477, 1433, + /* 420 */ 1513, 1550, 1514, 1502, 1538, 1455, 1483, 1559, 1564, 1566, + /* 430 */ 1473, 1481, 1565, 1524, 1568, 1571, 1569, 1572, 1528, 1561, + /* 440 */ 1574, 1530, 1562, 1575, 1577, 1578, 1576, 1580, 1582, 1581, + /* 450 */ 1583, 1585, 1584, 1486, 1587, 1588, 1515, 1586, 1590, 1489, + /* 460 */ 1589, 1591, 1592, 1593, 1594, 1596, 1598, 1589, 1599, 1600, + /* 470 */ 1602, 1601, 1604, 1605, 1607, 1608, 1609, 1610, 1612, 1613, + /* 480 */ 1615, 1614, 1518, 1516, 1527, 1532, 1533, 1618, 1616, 1637, }; -#define YY_REDUCE_USE_DFLT (-130) -#define YY_REDUCE_COUNT (324) -#define YY_REDUCE_MIN (-129) -#define YY_REDUCE_MAX (1300) +#define YY_REDUCE_COUNT (350) +#define YY_REDUCE_MIN (-225) +#define YY_REDUCE_MAX (1375) static const short yy_reduce_ofst[] = { - /* 0 */ -29, 566, 525, 605, -49, 307, 491, 533, 668, 435, - /* 10 */ 601, 644, 148, 747, 786, 795, 419, 788, 827, 790, - /* 20 */ 454, 832, 889, 495, 824, 734, 76, 76, 76, 76, - /* 30 */ 76, 76, 76, 76, 76, 76, 76, 76, 76, 76, - /* 40 */ 76, 76, 76, 76, 76, 76, 76, 76, 76, 76, - /* 50 */ 76, 76, 76, 76, 76, 76, 76, 76, 783, 898, - /* 60 */ 905, 907, 911, 921, 933, 936, 940, 943, 947, 950, - /* 70 */ 952, 955, 958, 962, 965, 969, 974, 977, 980, 984, - /* 80 */ 988, 991, 993, 996, 999, 1002, 1006, 1010, 1018, 1021, - /* 90 */ 1024, 1028, 1032, 1034, 1036, 1040, 1046, 1051, 1058, 1062, - /* 100 */ 1064, 1068, 1070, 1073, 76, 76, 76, 76, 76, 76, - /* 110 */ 76, 76, 76, 855, 36, 523, 235, 416, 777, 76, - /* 120 */ 278, 76, 76, 76, 76, 700, 700, 700, 150, 220, - /* 130 */ 147, 217, 221, 306, 306, 611, 5, 535, 556, 620, - /* 140 */ 720, 872, 897, 116, 864, 349, 1035, 1037, 404, 1047, - /* 150 */ 992, -129, 1050, 492, 62, 722, 879, 1072, 1089, 808, - /* 160 */ 1066, 1094, 1095, 1096, 1097, 1098, 776, 1054, 557, 57, - /* 170 */ 112, 131, 167, 182, 250, 272, 291, 331, 364, 438, - /* 180 */ 497, 517, 591, 653, 690, 739, 775, 798, 892, 908, - /* 190 */ 924, 930, 1015, 1063, 1069, 355, 784, 799, 981, 1101, - /* 200 */ 926, 1151, 1161, 1162, 945, 1164, 1166, 1128, 1168, 1171, - /* 210 */ 1172, 250, 1173, 1174, 1175, 1178, 1180, 1181, 1088, 1102, - /* 220 */ 1119, 1124, 1126, 926, 1131, 1139, 1188, 1140, 1129, 1130, - /* 230 */ 1103, 1144, 1107, 1179, 1156, 1167, 1182, 1134, 1122, 1183, - /* 240 */ 1184, 1150, 1153, 1197, 1111, 1202, 1203, 1123, 1125, 1205, - /* 250 */ 1147, 1185, 1169, 1186, 1190, 1191, 1192, 1213, 1217, 1193, - /* 260 */ 1157, 1196, 1198, 1194, 1220, 1218, 1145, 1154, 1229, 1231, - /* 270 */ 1233, 1216, 1237, 1240, 1241, 1244, 1222, 1227, 1230, 1232, - /* 280 */ 1223, 1235, 1236, 1245, 1249, 1226, 1250, 1254, 1199, 1201, - /* 290 */ 1204, 1207, 1209, 1211, 1214, 1212, 1255, 1208, 1259, 1215, - /* 300 */ 1256, 1200, 1206, 1260, 1247, 1261, 1263, 1262, 1266, 1278, - /* 310 */ 1282, 1292, 1294, 1297, 1298, 1299, 1300, 1221, 1224, 1228, - /* 320 */ 1288, 1291, 1276, 1277, 1295, + /* 0 */ -137, -31, 1104, 1023, 1081, -132, -40, -38, 223, 225, + /* 10 */ 698, -153, -99, -225, -165, 386, 478, 843, 859, -139, + /* 20 */ 884, 117, 277, 844, 857, 964, 559, 561, 614, 918, + /* 30 */ 1009, 1089, 1098, -222, -222, -222, -222, -222, -222, -222, + /* 40 */ -222, -222, -222, -222, -222, -222, -222, -222, -222, -222, + /* 50 */ -222, -222, -222, -222, -222, -222, -222, -222, -222, -222, + /* 60 */ -222, -222, -222, -222, -222, 329, 331, 497, 654, 656, + /* 70 */ 781, 891, 946, 1029, 1129, 1134, 1149, 1154, 1160, 1162, + /* 80 */ 1164, 1168, 1174, 1177, 1188, 1191, 1193, 1202, 1204, 1206, + /* 90 */ 1208, 1216, 1218, 1221, 1231, 1233, 1235, 1241, 1244, 1246, + /* 100 */ 1248, 1250, 1258, 1260, 1275, 1277, 1283, 1286, 1288, 1290, + /* 110 */ 1292, -222, -222, -222, -222, -222, -222, -222, -222, -222, + /* 120 */ -115, 796, -156, -154, -141, 14, 242, 349, 242, 349, + /* 130 */ -61, -222, -222, -222, -222, -222, 101, 101, 101, 332, + /* 140 */ 302, 384, 387, -170, 146, 344, 196, 196, 15, 11, + /* 150 */ 183, 235, 395, 355, 396, 406, 452, 457, 391, 459, + /* 160 */ 443, 447, 511, 495, 454, 512, 505, 571, 498, 532, + /* 170 */ 431, 435, 339, 455, 446, 508, -174, -116, -97, -120, + /* 180 */ -150, 64, 176, 330, 337, 509, 569, 611, 653, 673, + /* 190 */ 714, 717, 763, 771, -34, 779, 786, 830, 846, 860, + /* 200 */ 866, 882, 883, 890, 892, 895, 902, 319, 368, 769, + /* 210 */ 915, 924, 925, 932, 755, 936, 945, 963, 782, 969, + /* 220 */ 974, 816, 977, 64, 982, 983, 1016, 1022, 1024, 1031, + /* 230 */ 870, 831, 913, 966, 973, 981, 984, 755, 913, 913, + /* 240 */ 1000, 1041, 1063, 1015, 1010, 1011, 985, 1034, 1057, 1019, + /* 250 */ 1086, 1080, 1085, 1093, 1095, 1096, 1067, 1048, 1082, 1099, + /* 260 */ 1137, 1050, 1150, 1156, 1077, 1088, 1180, 1120, 1132, 1169, + /* 270 */ 1170, 1178, 1181, 1195, 1210, 1225, 1243, 1197, 1209, 1173, + /* 280 */ 1190, 1226, 1238, 1223, 1267, 1272, 1199, 1207, 1282, 1285, + /* 290 */ 1269, 1293, 1295, 1296, 1300, 1289, 1294, 1297, 1299, 1287, + /* 300 */ 1301, 1302, 1303, 1306, 1304, 1307, 1308, 1310, 1242, 1245, + /* 310 */ 1311, 1268, 1270, 1273, 1278, 1274, 1279, 1280, 1284, 1333, + /* 320 */ 1271, 1337, 1281, 1309, 1305, 1312, 1314, 1316, 1344, 1347, + /* 330 */ 1359, 1361, 1368, 1370, 1371, 1291, 1313, 1317, 1355, 1352, + /* 340 */ 1353, 1354, 1356, 1363, 1350, 1357, 1362, 1366, 1367, 1375, + /* 350 */ 1365, }; static const YYACTIONTYPE yy_default[] = { - /* 0 */ 1281, 1271, 1271, 1271, 1203, 1203, 1203, 1203, 1271, 1096, - /* 10 */ 1125, 1125, 1255, 1332, 1332, 1332, 1332, 1332, 1332, 1202, - /* 20 */ 1332, 1332, 1332, 1332, 1271, 1100, 1131, 1332, 1332, 1332, - /* 30 */ 1332, 1204, 1205, 1332, 1332, 1332, 1254, 1256, 1141, 1140, - /* 40 */ 1139, 1138, 1237, 1112, 1136, 1129, 1133, 1204, 1198, 1199, - /* 50 */ 1197, 1201, 1205, 1332, 1132, 1167, 1182, 1166, 1332, 1332, - /* 60 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 70 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 80 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 90 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 100 */ 1332, 1332, 1332, 1332, 1176, 1181, 1188, 1180, 1177, 1169, - /* 110 */ 1168, 1170, 1171, 1332, 1019, 1067, 1332, 1332, 1332, 1172, - /* 120 */ 1332, 1173, 1185, 1184, 1183, 1262, 1289, 1288, 1332, 1332, - /* 130 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 140 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 150 */ 1332, 1332, 1332, 1332, 1332, 1281, 1271, 1025, 1025, 1332, - /* 160 */ 1271, 1271, 1271, 1271, 1271, 1271, 1267, 1100, 1091, 1332, - /* 170 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 180 */ 1259, 1257, 1332, 1218, 1332, 1332, 1332, 1332, 1332, 1332, - /* 190 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 200 */ 1332, 1332, 1332, 1332, 1096, 1332, 1332, 1332, 1332, 1332, - /* 210 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1283, 1332, 1232, - /* 220 */ 1096, 1096, 1096, 1098, 1080, 1090, 1004, 1135, 1114, 1114, - /* 230 */ 1321, 1135, 1321, 1042, 1303, 1039, 1125, 1114, 1200, 1125, - /* 240 */ 1125, 1097, 1090, 1332, 1324, 1105, 1105, 1323, 1323, 1105, - /* 250 */ 1146, 1070, 1135, 1076, 1076, 1076, 1076, 1105, 1016, 1135, - /* 260 */ 1146, 1070, 1070, 1135, 1105, 1016, 1236, 1318, 1105, 1105, - /* 270 */ 1016, 1211, 1105, 1016, 1105, 1016, 1211, 1068, 1068, 1068, - /* 280 */ 1057, 1211, 1068, 1042, 1068, 1057, 1068, 1068, 1118, 1113, - /* 290 */ 1118, 1113, 1118, 1113, 1118, 1113, 1105, 1206, 1105, 1332, - /* 300 */ 1211, 1215, 1215, 1211, 1130, 1119, 1128, 1126, 1135, 1022, - /* 310 */ 1060, 1286, 1286, 1282, 1282, 1282, 1282, 1329, 1329, 1267, - /* 320 */ 1298, 1298, 1044, 1044, 1298, 1332, 1332, 1332, 1332, 1332, - /* 330 */ 1332, 1293, 1332, 1220, 1332, 1332, 1332, 1332, 1332, 1332, - /* 340 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 350 */ 1332, 1332, 1152, 1332, 1000, 1264, 1332, 1332, 1263, 1332, - /* 360 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 370 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1320, - /* 380 */ 1332, 1332, 1332, 1332, 1332, 1332, 1235, 1234, 1332, 1332, - /* 390 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 400 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, - /* 410 */ 1332, 1082, 1332, 1332, 1332, 1307, 1332, 1332, 1332, 1332, - /* 420 */ 1332, 1332, 1332, 1127, 1332, 1120, 1332, 1332, 1311, 1332, - /* 430 */ 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1332, 1273, - /* 440 */ 1332, 1332, 1332, 1272, 1332, 1332, 1332, 1332, 1332, 1154, - /* 450 */ 1332, 1153, 1157, 1332, 1010, 1332, + /* 0 */ 1389, 1389, 1389, 1261, 1046, 1151, 1261, 1261, 1261, 1261, + /* 10 */ 1046, 1181, 1181, 1312, 1077, 1046, 1046, 1046, 1046, 1046, + /* 20 */ 1046, 1260, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 30 */ 1046, 1046, 1046, 1187, 1046, 1046, 1046, 1046, 1262, 1263, + /* 40 */ 1046, 1046, 1046, 1311, 1313, 1197, 1196, 1195, 1194, 1294, + /* 50 */ 1168, 1192, 1185, 1189, 1256, 1257, 1255, 1259, 1262, 1263, + /* 60 */ 1046, 1188, 1226, 1240, 1225, 1046, 1046, 1046, 1046, 1046, + /* 70 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 80 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 90 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 100 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 110 */ 1046, 1234, 1239, 1246, 1238, 1235, 1228, 1227, 1229, 1230, + /* 120 */ 1046, 1067, 1116, 1046, 1046, 1046, 1329, 1328, 1046, 1046, + /* 130 */ 1077, 1231, 1232, 1243, 1242, 1241, 1319, 1345, 1344, 1046, + /* 140 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 150 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 160 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1077, + /* 170 */ 1073, 1073, 1046, 1324, 1151, 1142, 1046, 1046, 1046, 1046, + /* 180 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1316, 1314, 1046, + /* 190 */ 1276, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 200 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 210 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1147, 1046, + /* 220 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1339, + /* 230 */ 1046, 1289, 1130, 1147, 1147, 1147, 1147, 1149, 1131, 1129, + /* 240 */ 1141, 1077, 1053, 1191, 1170, 1170, 1378, 1191, 1191, 1378, + /* 250 */ 1091, 1359, 1088, 1181, 1181, 1181, 1170, 1258, 1148, 1141, + /* 260 */ 1046, 1381, 1156, 1156, 1380, 1380, 1156, 1200, 1206, 1119, + /* 270 */ 1191, 1125, 1125, 1125, 1125, 1156, 1064, 1191, 1191, 1200, + /* 280 */ 1206, 1119, 1119, 1191, 1156, 1064, 1293, 1375, 1156, 1064, + /* 290 */ 1269, 1156, 1064, 1156, 1064, 1269, 1117, 1117, 1117, 1106, + /* 300 */ 1269, 1117, 1091, 1117, 1106, 1117, 1117, 1269, 1273, 1273, + /* 310 */ 1269, 1174, 1169, 1174, 1169, 1174, 1169, 1174, 1169, 1156, + /* 320 */ 1264, 1156, 1046, 1186, 1175, 1184, 1182, 1191, 1070, 1109, + /* 330 */ 1342, 1342, 1338, 1338, 1338, 1386, 1386, 1324, 1354, 1077, + /* 340 */ 1077, 1077, 1077, 1354, 1093, 1093, 1077, 1077, 1077, 1077, + /* 350 */ 1354, 1046, 1046, 1046, 1046, 1046, 1046, 1349, 1046, 1278, + /* 360 */ 1160, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 370 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 380 */ 1046, 1046, 1211, 1046, 1049, 1321, 1046, 1046, 1320, 1046, + /* 390 */ 1046, 1046, 1046, 1046, 1046, 1161, 1046, 1046, 1046, 1046, + /* 400 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 410 */ 1046, 1046, 1046, 1046, 1377, 1046, 1046, 1046, 1046, 1046, + /* 420 */ 1046, 1292, 1291, 1046, 1046, 1158, 1046, 1046, 1046, 1046, + /* 430 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 440 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 450 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 460 */ 1183, 1046, 1176, 1046, 1046, 1046, 1046, 1368, 1046, 1046, + /* 470 */ 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, 1046, + /* 480 */ 1046, 1363, 1133, 1213, 1046, 1212, 1216, 1046, 1058, 1046, }; /********** End of lemon-generated parsing tables *****************************/ @@ -135182,36 +142239,52 @@ static const YYACTIONTYPE yy_default[] = { static const YYCODETYPE yyFallback[] = { 0, /* $ => nothing */ 0, /* SEMI => nothing */ - 55, /* EXPLAIN => ID */ - 55, /* QUERY => ID */ - 55, /* PLAN => ID */ - 55, /* BEGIN => ID */ + 59, /* EXPLAIN => ID */ + 59, /* QUERY => ID */ + 59, /* PLAN => ID */ + 59, /* BEGIN => ID */ 0, /* TRANSACTION => nothing */ - 55, /* DEFERRED => ID */ - 55, /* IMMEDIATE => ID */ - 55, /* EXCLUSIVE => ID */ + 59, /* DEFERRED => ID */ + 59, /* IMMEDIATE => ID */ + 59, /* EXCLUSIVE => ID */ 0, /* COMMIT => nothing */ - 55, /* END => ID */ - 55, /* ROLLBACK => ID */ - 55, /* SAVEPOINT => ID */ - 55, /* RELEASE => ID */ + 59, /* END => ID */ + 59, /* ROLLBACK => ID */ + 59, /* SAVEPOINT => ID */ + 59, /* RELEASE => ID */ 0, /* TO => nothing */ 0, /* TABLE => nothing */ 0, /* CREATE => nothing */ - 55, /* IF => ID */ + 59, /* IF => ID */ 0, /* NOT => nothing */ 0, /* EXISTS => nothing */ - 55, /* TEMP => ID */ + 59, /* TEMP => ID */ 0, /* LP => nothing */ 0, /* RP => nothing */ 0, /* AS => nothing */ - 55, /* WITHOUT => ID */ + 59, /* WITHOUT => ID */ 0, /* COMMA => nothing */ + 59, /* ABORT => ID */ + 59, /* ACTION => ID */ + 59, /* AFTER => ID */ + 59, /* ANALYZE => ID */ + 59, /* ASC => ID */ + 59, /* ATTACH => ID */ + 59, /* BEFORE => ID */ + 59, /* BY => ID */ + 59, /* CASCADE => ID */ + 59, /* CAST => ID */ + 59, /* CONFLICT => ID */ + 59, /* DATABASE => ID */ + 59, /* DESC => ID */ + 59, /* DETACH => ID */ + 59, /* EACH => ID */ + 59, /* FAIL => ID */ 0, /* OR => nothing */ 0, /* AND => nothing */ 0, /* IS => nothing */ - 55, /* MATCH => ID */ - 55, /* LIKE_KW => ID */ + 59, /* MATCH => ID */ + 59, /* LIKE_KW => ID */ 0, /* BETWEEN => nothing */ 0, /* IN => nothing */ 0, /* ISNULL => nothing */ @@ -135223,59 +142296,31 @@ static const YYCODETYPE yyFallback[] = { 0, /* LT => nothing */ 0, /* GE => nothing */ 0, /* ESCAPE => nothing */ - 0, /* BITAND => nothing */ - 0, /* BITOR => nothing */ - 0, /* LSHIFT => nothing */ - 0, /* RSHIFT => nothing */ - 0, /* PLUS => nothing */ - 0, /* MINUS => nothing */ - 0, /* STAR => nothing */ - 0, /* SLASH => nothing */ - 0, /* REM => nothing */ - 0, /* CONCAT => nothing */ - 0, /* COLLATE => nothing */ - 0, /* BITNOT => nothing */ 0, /* ID => nothing */ - 0, /* INDEXED => nothing */ - 55, /* ABORT => ID */ - 55, /* ACTION => ID */ - 55, /* AFTER => ID */ - 55, /* ANALYZE => ID */ - 55, /* ASC => ID */ - 55, /* ATTACH => ID */ - 55, /* BEFORE => ID */ - 55, /* BY => ID */ - 55, /* CASCADE => ID */ - 55, /* CAST => ID */ - 55, /* COLUMNKW => ID */ - 55, /* CONFLICT => ID */ - 55, /* DATABASE => ID */ - 55, /* DESC => ID */ - 55, /* DETACH => ID */ - 55, /* EACH => ID */ - 55, /* FAIL => ID */ - 55, /* FOR => ID */ - 55, /* IGNORE => ID */ - 55, /* INITIALLY => ID */ - 55, /* INSTEAD => ID */ - 55, /* NO => ID */ - 55, /* KEY => ID */ - 55, /* OF => ID */ - 55, /* OFFSET => ID */ - 55, /* PRAGMA => ID */ - 55, /* RAISE => ID */ - 55, /* RECURSIVE => ID */ - 55, /* REPLACE => ID */ - 55, /* RESTRICT => ID */ - 55, /* ROW => ID */ - 55, /* TRIGGER => ID */ - 55, /* VACUUM => ID */ - 55, /* VIEW => ID */ - 55, /* VIRTUAL => ID */ - 55, /* WITH => ID */ - 55, /* REINDEX => ID */ - 55, /* RENAME => ID */ - 55, /* CTIME_KW => ID */ + 59, /* COLUMNKW => ID */ + 59, /* DO => ID */ + 59, /* FOR => ID */ + 59, /* IGNORE => ID */ + 59, /* INITIALLY => ID */ + 59, /* INSTEAD => ID */ + 59, /* NO => ID */ + 59, /* KEY => ID */ + 59, /* OF => ID */ + 59, /* OFFSET => ID */ + 59, /* PRAGMA => ID */ + 59, /* RAISE => ID */ + 59, /* RECURSIVE => ID */ + 59, /* REPLACE => ID */ + 59, /* RESTRICT => ID */ + 59, /* ROW => ID */ + 59, /* TRIGGER => ID */ + 59, /* VACUUM => ID */ + 59, /* VIEW => ID */ + 59, /* VIRTUAL => ID */ + 59, /* WITH => ID */ + 59, /* REINDEX => ID */ + 59, /* RENAME => ID */ + 59, /* CTIME_KW => ID */ }; #endif /* YYFALLBACK */ @@ -135315,12 +142360,14 @@ struct yyParser { int yyerrcnt; /* Shifts left before out of the error */ #endif sqlite3ParserARG_SDECL /* A place to hold %extra_argument */ + sqlite3ParserCTX_SDECL /* A place to hold %extra_context */ #if YYSTACKDEPTH<=0 int yystksz; /* Current side of the stack */ yyStackEntry *yystack; /* The parser's stack */ yyStackEntry yystk0; /* First stack entry */ #else yyStackEntry yystack[YYSTACKDEPTH]; /* The parser's stack */ + yyStackEntry *yystackEnd; /* Last entry in the stack */ #endif }; typedef struct yyParser yyParser; @@ -135357,75 +142404,267 @@ SQLITE_PRIVATE void sqlite3ParserTrace(FILE *TraceFILE, char *zTracePrompt){ } #endif /* NDEBUG */ -#ifndef NDEBUG +#if defined(YYCOVERAGE) || !defined(NDEBUG) /* For tracing shifts, the names of all terminals and nonterminals ** are required. The following table supplies these names */ static const char *const yyTokenName[] = { - "$", "SEMI", "EXPLAIN", "QUERY", - "PLAN", "BEGIN", "TRANSACTION", "DEFERRED", - "IMMEDIATE", "EXCLUSIVE", "COMMIT", "END", - "ROLLBACK", "SAVEPOINT", "RELEASE", "TO", - "TABLE", "CREATE", "IF", "NOT", - "EXISTS", "TEMP", "LP", "RP", - "AS", "WITHOUT", "COMMA", "OR", - "AND", "IS", "MATCH", "LIKE_KW", - "BETWEEN", "IN", "ISNULL", "NOTNULL", - "NE", "EQ", "GT", "LE", - "LT", "GE", "ESCAPE", "BITAND", - "BITOR", "LSHIFT", "RSHIFT", "PLUS", - "MINUS", "STAR", "SLASH", "REM", - "CONCAT", "COLLATE", "BITNOT", "ID", - "INDEXED", "ABORT", "ACTION", "AFTER", - "ANALYZE", "ASC", "ATTACH", "BEFORE", - "BY", "CASCADE", "CAST", "COLUMNKW", - "CONFLICT", "DATABASE", "DESC", "DETACH", - "EACH", "FAIL", "FOR", "IGNORE", - "INITIALLY", "INSTEAD", "NO", "KEY", - "OF", "OFFSET", "PRAGMA", "RAISE", - "RECURSIVE", "REPLACE", "RESTRICT", "ROW", - "TRIGGER", "VACUUM", "VIEW", "VIRTUAL", - "WITH", "REINDEX", "RENAME", "CTIME_KW", - "ANY", "STRING", "JOIN_KW", "CONSTRAINT", - "DEFAULT", "NULL", "PRIMARY", "UNIQUE", - "CHECK", "REFERENCES", "AUTOINCR", "ON", - "INSERT", "DELETE", "UPDATE", "SET", - "DEFERRABLE", "FOREIGN", "DROP", "UNION", - "ALL", "EXCEPT", "INTERSECT", "SELECT", - "VALUES", "DISTINCT", "DOT", "FROM", - "JOIN", "USING", "ORDER", "GROUP", - "HAVING", "LIMIT", "WHERE", "INTO", - "FLOAT", "BLOB", "INTEGER", "VARIABLE", - "CASE", "WHEN", "THEN", "ELSE", - "INDEX", "ALTER", "ADD", "error", - "input", "cmdlist", "ecmd", "explain", - "cmdx", "cmd", "transtype", "trans_opt", - "nm", "savepoint_opt", "create_table", "create_table_args", - "createkw", "temp", "ifnotexists", "dbnm", - "columnlist", "conslist_opt", "table_options", "select", - "columnname", "carglist", "typetoken", "typename", - "signed", "plus_num", "minus_num", "ccons", - "term", "expr", "onconf", "sortorder", - "autoinc", "eidlist_opt", "refargs", "defer_subclause", - "refarg", "refact", "init_deferred_pred_opt", "conslist", - "tconscomma", "tcons", "sortlist", "eidlist", - "defer_subclause_opt", "orconf", "resolvetype", "raisetype", - "ifexists", "fullname", "selectnowith", "oneselect", - "with", "multiselect_op", "distinct", "selcollist", - "from", "where_opt", "groupby_opt", "having_opt", - "orderby_opt", "limit_opt", "values", "nexprlist", - "exprlist", "sclp", "as", "seltablist", - "stl_prefix", "joinop", "indexed_opt", "on_opt", - "using_opt", "idlist", "setlist", "insert_cmd", - "idlist_opt", "likeop", "between_op", "in_op", - "paren_exprlist", "case_operand", "case_exprlist", "case_else", - "uniqueflag", "collate", "nmnum", "trigger_decl", - "trigger_cmd_list", "trigger_time", "trigger_event", "foreach_clause", - "when_clause", "trigger_cmd", "trnm", "tridxby", - "database_kw_opt", "key_opt", "add_column_fullname", "kwcolumn_opt", - "create_vtab", "vtabarglist", "vtabarg", "vtabargtoken", - "lp", "anylist", "wqlist", + /* 0 */ "$", + /* 1 */ "SEMI", + /* 2 */ "EXPLAIN", + /* 3 */ "QUERY", + /* 4 */ "PLAN", + /* 5 */ "BEGIN", + /* 6 */ "TRANSACTION", + /* 7 */ "DEFERRED", + /* 8 */ "IMMEDIATE", + /* 9 */ "EXCLUSIVE", + /* 10 */ "COMMIT", + /* 11 */ "END", + /* 12 */ "ROLLBACK", + /* 13 */ "SAVEPOINT", + /* 14 */ "RELEASE", + /* 15 */ "TO", + /* 16 */ "TABLE", + /* 17 */ "CREATE", + /* 18 */ "IF", + /* 19 */ "NOT", + /* 20 */ "EXISTS", + /* 21 */ "TEMP", + /* 22 */ "LP", + /* 23 */ "RP", + /* 24 */ "AS", + /* 25 */ "WITHOUT", + /* 26 */ "COMMA", + /* 27 */ "ABORT", + /* 28 */ "ACTION", + /* 29 */ "AFTER", + /* 30 */ "ANALYZE", + /* 31 */ "ASC", + /* 32 */ "ATTACH", + /* 33 */ "BEFORE", + /* 34 */ "BY", + /* 35 */ "CASCADE", + /* 36 */ "CAST", + /* 37 */ "CONFLICT", + /* 38 */ "DATABASE", + /* 39 */ "DESC", + /* 40 */ "DETACH", + /* 41 */ "EACH", + /* 42 */ "FAIL", + /* 43 */ "OR", + /* 44 */ "AND", + /* 45 */ "IS", + /* 46 */ "MATCH", + /* 47 */ "LIKE_KW", + /* 48 */ "BETWEEN", + /* 49 */ "IN", + /* 50 */ "ISNULL", + /* 51 */ "NOTNULL", + /* 52 */ "NE", + /* 53 */ "EQ", + /* 54 */ "GT", + /* 55 */ "LE", + /* 56 */ "LT", + /* 57 */ "GE", + /* 58 */ "ESCAPE", + /* 59 */ "ID", + /* 60 */ "COLUMNKW", + /* 61 */ "DO", + /* 62 */ "FOR", + /* 63 */ "IGNORE", + /* 64 */ "INITIALLY", + /* 65 */ "INSTEAD", + /* 66 */ "NO", + /* 67 */ "KEY", + /* 68 */ "OF", + /* 69 */ "OFFSET", + /* 70 */ "PRAGMA", + /* 71 */ "RAISE", + /* 72 */ "RECURSIVE", + /* 73 */ "REPLACE", + /* 74 */ "RESTRICT", + /* 75 */ "ROW", + /* 76 */ "TRIGGER", + /* 77 */ "VACUUM", + /* 78 */ "VIEW", + /* 79 */ "VIRTUAL", + /* 80 */ "WITH", + /* 81 */ "REINDEX", + /* 82 */ "RENAME", + /* 83 */ "CTIME_KW", + /* 84 */ "ANY", + /* 85 */ "BITAND", + /* 86 */ "BITOR", + /* 87 */ "LSHIFT", + /* 88 */ "RSHIFT", + /* 89 */ "PLUS", + /* 90 */ "MINUS", + /* 91 */ "STAR", + /* 92 */ "SLASH", + /* 93 */ "REM", + /* 94 */ "CONCAT", + /* 95 */ "COLLATE", + /* 96 */ "BITNOT", + /* 97 */ "ON", + /* 98 */ "INDEXED", + /* 99 */ "STRING", + /* 100 */ "JOIN_KW", + /* 101 */ "CONSTRAINT", + /* 102 */ "DEFAULT", + /* 103 */ "NULL", + /* 104 */ "PRIMARY", + /* 105 */ "UNIQUE", + /* 106 */ "CHECK", + /* 107 */ "REFERENCES", + /* 108 */ "AUTOINCR", + /* 109 */ "INSERT", + /* 110 */ "DELETE", + /* 111 */ "UPDATE", + /* 112 */ "SET", + /* 113 */ "DEFERRABLE", + /* 114 */ "FOREIGN", + /* 115 */ "DROP", + /* 116 */ "UNION", + /* 117 */ "ALL", + /* 118 */ "EXCEPT", + /* 119 */ "INTERSECT", + /* 120 */ "SELECT", + /* 121 */ "VALUES", + /* 122 */ "DISTINCT", + /* 123 */ "DOT", + /* 124 */ "FROM", + /* 125 */ "JOIN", + /* 126 */ "USING", + /* 127 */ "ORDER", + /* 128 */ "GROUP", + /* 129 */ "HAVING", + /* 130 */ "LIMIT", + /* 131 */ "WHERE", + /* 132 */ "INTO", + /* 133 */ "NOTHING", + /* 134 */ "FLOAT", + /* 135 */ "BLOB", + /* 136 */ "INTEGER", + /* 137 */ "VARIABLE", + /* 138 */ "CASE", + /* 139 */ "WHEN", + /* 140 */ "THEN", + /* 141 */ "ELSE", + /* 142 */ "INDEX", + /* 143 */ "ALTER", + /* 144 */ "ADD", + /* 145 */ "input", + /* 146 */ "cmdlist", + /* 147 */ "ecmd", + /* 148 */ "cmdx", + /* 149 */ "explain", + /* 150 */ "cmd", + /* 151 */ "transtype", + /* 152 */ "trans_opt", + /* 153 */ "nm", + /* 154 */ "savepoint_opt", + /* 155 */ "create_table", + /* 156 */ "create_table_args", + /* 157 */ "createkw", + /* 158 */ "temp", + /* 159 */ "ifnotexists", + /* 160 */ "dbnm", + /* 161 */ "columnlist", + /* 162 */ "conslist_opt", + /* 163 */ "table_options", + /* 164 */ "select", + /* 165 */ "columnname", + /* 166 */ "carglist", + /* 167 */ "typetoken", + /* 168 */ "typename", + /* 169 */ "signed", + /* 170 */ "plus_num", + /* 171 */ "minus_num", + /* 172 */ "scanpt", + /* 173 */ "ccons", + /* 174 */ "term", + /* 175 */ "expr", + /* 176 */ "onconf", + /* 177 */ "sortorder", + /* 178 */ "autoinc", + /* 179 */ "eidlist_opt", + /* 180 */ "refargs", + /* 181 */ "defer_subclause", + /* 182 */ "refarg", + /* 183 */ "refact", + /* 184 */ "init_deferred_pred_opt", + /* 185 */ "conslist", + /* 186 */ "tconscomma", + /* 187 */ "tcons", + /* 188 */ "sortlist", + /* 189 */ "eidlist", + /* 190 */ "defer_subclause_opt", + /* 191 */ "orconf", + /* 192 */ "resolvetype", + /* 193 */ "raisetype", + /* 194 */ "ifexists", + /* 195 */ "fullname", + /* 196 */ "selectnowith", + /* 197 */ "oneselect", + /* 198 */ "wqlist", + /* 199 */ "multiselect_op", + /* 200 */ "distinct", + /* 201 */ "selcollist", + /* 202 */ "from", + /* 203 */ "where_opt", + /* 204 */ "groupby_opt", + /* 205 */ "having_opt", + /* 206 */ "orderby_opt", + /* 207 */ "limit_opt", + /* 208 */ "values", + /* 209 */ "nexprlist", + /* 210 */ "exprlist", + /* 211 */ "sclp", + /* 212 */ "as", + /* 213 */ "seltablist", + /* 214 */ "stl_prefix", + /* 215 */ "joinop", + /* 216 */ "indexed_opt", + /* 217 */ "on_opt", + /* 218 */ "using_opt", + /* 219 */ "xfullname", + /* 220 */ "idlist", + /* 221 */ "with", + /* 222 */ "setlist", + /* 223 */ "insert_cmd", + /* 224 */ "idlist_opt", + /* 225 */ "upsert", + /* 226 */ "likeop", + /* 227 */ "between_op", + /* 228 */ "in_op", + /* 229 */ "paren_exprlist", + /* 230 */ "case_operand", + /* 231 */ "case_exprlist", + /* 232 */ "case_else", + /* 233 */ "uniqueflag", + /* 234 */ "collate", + /* 235 */ "nmnum", + /* 236 */ "trigger_decl", + /* 237 */ "trigger_cmd_list", + /* 238 */ "trigger_time", + /* 239 */ "trigger_event", + /* 240 */ "foreach_clause", + /* 241 */ "when_clause", + /* 242 */ "trigger_cmd", + /* 243 */ "trnm", + /* 244 */ "tridxby", + /* 245 */ "database_kw_opt", + /* 246 */ "key_opt", + /* 247 */ "add_column_fullname", + /* 248 */ "kwcolumn_opt", + /* 249 */ "create_vtab", + /* 250 */ "vtabarglist", + /* 251 */ "vtabarg", + /* 252 */ "vtabargtoken", + /* 253 */ "lp", + /* 254 */ "anylist", }; -#endif /* NDEBUG */ +#endif /* defined(YYCOVERAGE) || !defined(NDEBUG) */ #ifndef NDEBUG /* For tracing reduce actions, the names of all rules are required. @@ -135439,33 +142678,33 @@ static const char *const yyRuleName[] = { /* 5 */ "transtype ::= DEFERRED", /* 6 */ "transtype ::= IMMEDIATE", /* 7 */ "transtype ::= EXCLUSIVE", - /* 8 */ "cmd ::= COMMIT trans_opt", - /* 9 */ "cmd ::= END trans_opt", - /* 10 */ "cmd ::= ROLLBACK trans_opt", - /* 11 */ "cmd ::= SAVEPOINT nm", - /* 12 */ "cmd ::= RELEASE savepoint_opt nm", - /* 13 */ "cmd ::= ROLLBACK trans_opt TO savepoint_opt nm", - /* 14 */ "create_table ::= createkw temp TABLE ifnotexists nm dbnm", - /* 15 */ "createkw ::= CREATE", - /* 16 */ "ifnotexists ::=", - /* 17 */ "ifnotexists ::= IF NOT EXISTS", - /* 18 */ "temp ::= TEMP", - /* 19 */ "temp ::=", - /* 20 */ "create_table_args ::= LP columnlist conslist_opt RP table_options", - /* 21 */ "create_table_args ::= AS select", - /* 22 */ "table_options ::=", - /* 23 */ "table_options ::= WITHOUT nm", - /* 24 */ "columnname ::= nm typetoken", - /* 25 */ "typetoken ::=", - /* 26 */ "typetoken ::= typename LP signed RP", - /* 27 */ "typetoken ::= typename LP signed COMMA signed RP", - /* 28 */ "typename ::= typename ID|STRING", + /* 8 */ "cmd ::= COMMIT|END trans_opt", + /* 9 */ "cmd ::= ROLLBACK trans_opt", + /* 10 */ "cmd ::= SAVEPOINT nm", + /* 11 */ "cmd ::= RELEASE savepoint_opt nm", + /* 12 */ "cmd ::= ROLLBACK trans_opt TO savepoint_opt nm", + /* 13 */ "create_table ::= createkw temp TABLE ifnotexists nm dbnm", + /* 14 */ "createkw ::= CREATE", + /* 15 */ "ifnotexists ::=", + /* 16 */ "ifnotexists ::= IF NOT EXISTS", + /* 17 */ "temp ::= TEMP", + /* 18 */ "temp ::=", + /* 19 */ "create_table_args ::= LP columnlist conslist_opt RP table_options", + /* 20 */ "create_table_args ::= AS select", + /* 21 */ "table_options ::=", + /* 22 */ "table_options ::= WITHOUT nm", + /* 23 */ "columnname ::= nm typetoken", + /* 24 */ "typetoken ::=", + /* 25 */ "typetoken ::= typename LP signed RP", + /* 26 */ "typetoken ::= typename LP signed COMMA signed RP", + /* 27 */ "typename ::= typename ID|STRING", + /* 28 */ "scanpt ::=", /* 29 */ "ccons ::= CONSTRAINT nm", - /* 30 */ "ccons ::= DEFAULT term", + /* 30 */ "ccons ::= DEFAULT scanpt term scanpt", /* 31 */ "ccons ::= DEFAULT LP expr RP", - /* 32 */ "ccons ::= DEFAULT PLUS term", - /* 33 */ "ccons ::= DEFAULT MINUS term", - /* 34 */ "ccons ::= DEFAULT ID|INDEXED", + /* 32 */ "ccons ::= DEFAULT PLUS term scanpt", + /* 33 */ "ccons ::= DEFAULT MINUS term scanpt", + /* 34 */ "ccons ::= DEFAULT scanpt ID|INDEXED", /* 35 */ "ccons ::= NOT NULL onconf", /* 36 */ "ccons ::= PRIMARY KEY sortorder onconf autoinc", /* 37 */ "ccons ::= UNIQUE onconf", @@ -135511,258 +142750,267 @@ static const char *const yyRuleName[] = { /* 77 */ "cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select", /* 78 */ "cmd ::= DROP VIEW ifexists fullname", /* 79 */ "cmd ::= select", - /* 80 */ "select ::= with selectnowith", - /* 81 */ "selectnowith ::= selectnowith multiselect_op oneselect", - /* 82 */ "multiselect_op ::= UNION", - /* 83 */ "multiselect_op ::= UNION ALL", - /* 84 */ "multiselect_op ::= EXCEPT|INTERSECT", - /* 85 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt", - /* 86 */ "values ::= VALUES LP nexprlist RP", - /* 87 */ "values ::= values COMMA LP exprlist RP", - /* 88 */ "distinct ::= DISTINCT", - /* 89 */ "distinct ::= ALL", - /* 90 */ "distinct ::=", - /* 91 */ "sclp ::=", - /* 92 */ "selcollist ::= sclp expr as", - /* 93 */ "selcollist ::= sclp STAR", - /* 94 */ "selcollist ::= sclp nm DOT STAR", - /* 95 */ "as ::= AS nm", - /* 96 */ "as ::=", - /* 97 */ "from ::=", - /* 98 */ "from ::= FROM seltablist", - /* 99 */ "stl_prefix ::= seltablist joinop", - /* 100 */ "stl_prefix ::=", - /* 101 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt", - /* 102 */ "seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt", - /* 103 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt", - /* 104 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt", - /* 105 */ "dbnm ::=", - /* 106 */ "dbnm ::= DOT nm", - /* 107 */ "fullname ::= nm dbnm", - /* 108 */ "joinop ::= COMMA|JOIN", - /* 109 */ "joinop ::= JOIN_KW JOIN", - /* 110 */ "joinop ::= JOIN_KW nm JOIN", - /* 111 */ "joinop ::= JOIN_KW nm nm JOIN", - /* 112 */ "on_opt ::= ON expr", - /* 113 */ "on_opt ::=", - /* 114 */ "indexed_opt ::=", - /* 115 */ "indexed_opt ::= INDEXED BY nm", - /* 116 */ "indexed_opt ::= NOT INDEXED", - /* 117 */ "using_opt ::= USING LP idlist RP", - /* 118 */ "using_opt ::=", - /* 119 */ "orderby_opt ::=", - /* 120 */ "orderby_opt ::= ORDER BY sortlist", - /* 121 */ "sortlist ::= sortlist COMMA expr sortorder", - /* 122 */ "sortlist ::= expr sortorder", - /* 123 */ "sortorder ::= ASC", - /* 124 */ "sortorder ::= DESC", - /* 125 */ "sortorder ::=", - /* 126 */ "groupby_opt ::=", - /* 127 */ "groupby_opt ::= GROUP BY nexprlist", - /* 128 */ "having_opt ::=", - /* 129 */ "having_opt ::= HAVING expr", - /* 130 */ "limit_opt ::=", - /* 131 */ "limit_opt ::= LIMIT expr", - /* 132 */ "limit_opt ::= LIMIT expr OFFSET expr", - /* 133 */ "limit_opt ::= LIMIT expr COMMA expr", - /* 134 */ "cmd ::= with DELETE FROM fullname indexed_opt where_opt", - /* 135 */ "where_opt ::=", - /* 136 */ "where_opt ::= WHERE expr", - /* 137 */ "cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt", - /* 138 */ "setlist ::= setlist COMMA nm EQ expr", - /* 139 */ "setlist ::= setlist COMMA LP idlist RP EQ expr", - /* 140 */ "setlist ::= nm EQ expr", - /* 141 */ "setlist ::= LP idlist RP EQ expr", - /* 142 */ "cmd ::= with insert_cmd INTO fullname idlist_opt select", - /* 143 */ "cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES", - /* 144 */ "insert_cmd ::= INSERT orconf", - /* 145 */ "insert_cmd ::= REPLACE", - /* 146 */ "idlist_opt ::=", - /* 147 */ "idlist_opt ::= LP idlist RP", - /* 148 */ "idlist ::= idlist COMMA nm", - /* 149 */ "idlist ::= nm", - /* 150 */ "expr ::= LP expr RP", - /* 151 */ "term ::= NULL", - /* 152 */ "expr ::= ID|INDEXED", - /* 153 */ "expr ::= JOIN_KW", - /* 154 */ "expr ::= nm DOT nm", - /* 155 */ "expr ::= nm DOT nm DOT nm", - /* 156 */ "term ::= FLOAT|BLOB", - /* 157 */ "term ::= STRING", - /* 158 */ "term ::= INTEGER", - /* 159 */ "expr ::= VARIABLE", - /* 160 */ "expr ::= expr COLLATE ID|STRING", - /* 161 */ "expr ::= CAST LP expr AS typetoken RP", - /* 162 */ "expr ::= ID|INDEXED LP distinct exprlist RP", - /* 163 */ "expr ::= ID|INDEXED LP STAR RP", - /* 164 */ "term ::= CTIME_KW", - /* 165 */ "expr ::= LP nexprlist COMMA expr RP", - /* 166 */ "expr ::= expr AND expr", - /* 167 */ "expr ::= expr OR expr", - /* 168 */ "expr ::= expr LT|GT|GE|LE expr", - /* 169 */ "expr ::= expr EQ|NE expr", - /* 170 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr", - /* 171 */ "expr ::= expr PLUS|MINUS expr", - /* 172 */ "expr ::= expr STAR|SLASH|REM expr", - /* 173 */ "expr ::= expr CONCAT expr", - /* 174 */ "likeop ::= LIKE_KW|MATCH", - /* 175 */ "likeop ::= NOT LIKE_KW|MATCH", - /* 176 */ "expr ::= expr likeop expr", - /* 177 */ "expr ::= expr likeop expr ESCAPE expr", - /* 178 */ "expr ::= expr ISNULL|NOTNULL", - /* 179 */ "expr ::= expr NOT NULL", - /* 180 */ "expr ::= expr IS expr", - /* 181 */ "expr ::= expr IS NOT expr", - /* 182 */ "expr ::= NOT expr", - /* 183 */ "expr ::= BITNOT expr", - /* 184 */ "expr ::= MINUS expr", - /* 185 */ "expr ::= PLUS expr", - /* 186 */ "between_op ::= BETWEEN", - /* 187 */ "between_op ::= NOT BETWEEN", - /* 188 */ "expr ::= expr between_op expr AND expr", - /* 189 */ "in_op ::= IN", - /* 190 */ "in_op ::= NOT IN", - /* 191 */ "expr ::= expr in_op LP exprlist RP", - /* 192 */ "expr ::= LP select RP", - /* 193 */ "expr ::= expr in_op LP select RP", - /* 194 */ "expr ::= expr in_op nm dbnm paren_exprlist", - /* 195 */ "expr ::= EXISTS LP select RP", - /* 196 */ "expr ::= CASE case_operand case_exprlist case_else END", - /* 197 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr", - /* 198 */ "case_exprlist ::= WHEN expr THEN expr", - /* 199 */ "case_else ::= ELSE expr", - /* 200 */ "case_else ::=", - /* 201 */ "case_operand ::= expr", - /* 202 */ "case_operand ::=", - /* 203 */ "exprlist ::=", - /* 204 */ "nexprlist ::= nexprlist COMMA expr", - /* 205 */ "nexprlist ::= expr", - /* 206 */ "paren_exprlist ::=", - /* 207 */ "paren_exprlist ::= LP exprlist RP", - /* 208 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt", - /* 209 */ "uniqueflag ::= UNIQUE", - /* 210 */ "uniqueflag ::=", - /* 211 */ "eidlist_opt ::=", - /* 212 */ "eidlist_opt ::= LP eidlist RP", - /* 213 */ "eidlist ::= eidlist COMMA nm collate sortorder", - /* 214 */ "eidlist ::= nm collate sortorder", - /* 215 */ "collate ::=", - /* 216 */ "collate ::= COLLATE ID|STRING", - /* 217 */ "cmd ::= DROP INDEX ifexists fullname", - /* 218 */ "cmd ::= VACUUM", - /* 219 */ "cmd ::= VACUUM nm", - /* 220 */ "cmd ::= PRAGMA nm dbnm", - /* 221 */ "cmd ::= PRAGMA nm dbnm EQ nmnum", - /* 222 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP", - /* 223 */ "cmd ::= PRAGMA nm dbnm EQ minus_num", - /* 224 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP", - /* 225 */ "plus_num ::= PLUS INTEGER|FLOAT", - /* 226 */ "minus_num ::= MINUS INTEGER|FLOAT", - /* 227 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END", - /* 228 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause", - /* 229 */ "trigger_time ::= BEFORE", - /* 230 */ "trigger_time ::= AFTER", - /* 231 */ "trigger_time ::= INSTEAD OF", - /* 232 */ "trigger_time ::=", - /* 233 */ "trigger_event ::= DELETE|INSERT", - /* 234 */ "trigger_event ::= UPDATE", - /* 235 */ "trigger_event ::= UPDATE OF idlist", - /* 236 */ "when_clause ::=", - /* 237 */ "when_clause ::= WHEN expr", - /* 238 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI", - /* 239 */ "trigger_cmd_list ::= trigger_cmd SEMI", - /* 240 */ "trnm ::= nm DOT nm", - /* 241 */ "tridxby ::= INDEXED BY nm", - /* 242 */ "tridxby ::= NOT INDEXED", - /* 243 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt", - /* 244 */ "trigger_cmd ::= insert_cmd INTO trnm idlist_opt select", - /* 245 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt", - /* 246 */ "trigger_cmd ::= select", - /* 247 */ "expr ::= RAISE LP IGNORE RP", - /* 248 */ "expr ::= RAISE LP raisetype COMMA nm RP", - /* 249 */ "raisetype ::= ROLLBACK", - /* 250 */ "raisetype ::= ABORT", - /* 251 */ "raisetype ::= FAIL", - /* 252 */ "cmd ::= DROP TRIGGER ifexists fullname", - /* 253 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt", - /* 254 */ "cmd ::= DETACH database_kw_opt expr", - /* 255 */ "key_opt ::=", - /* 256 */ "key_opt ::= KEY expr", - /* 257 */ "cmd ::= REINDEX", - /* 258 */ "cmd ::= REINDEX nm dbnm", - /* 259 */ "cmd ::= ANALYZE", - /* 260 */ "cmd ::= ANALYZE nm dbnm", - /* 261 */ "cmd ::= ALTER TABLE fullname RENAME TO nm", - /* 262 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist", - /* 263 */ "add_column_fullname ::= fullname", - /* 264 */ "cmd ::= create_vtab", - /* 265 */ "cmd ::= create_vtab LP vtabarglist RP", - /* 266 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm", - /* 267 */ "vtabarg ::=", - /* 268 */ "vtabargtoken ::= ANY", - /* 269 */ "vtabargtoken ::= lp anylist RP", - /* 270 */ "lp ::= LP", - /* 271 */ "with ::=", - /* 272 */ "with ::= WITH wqlist", - /* 273 */ "with ::= WITH RECURSIVE wqlist", - /* 274 */ "wqlist ::= nm eidlist_opt AS LP select RP", - /* 275 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP", - /* 276 */ "input ::= cmdlist", - /* 277 */ "cmdlist ::= cmdlist ecmd", - /* 278 */ "cmdlist ::= ecmd", - /* 279 */ "ecmd ::= SEMI", - /* 280 */ "ecmd ::= explain cmdx SEMI", - /* 281 */ "explain ::=", - /* 282 */ "trans_opt ::=", - /* 283 */ "trans_opt ::= TRANSACTION", - /* 284 */ "trans_opt ::= TRANSACTION nm", - /* 285 */ "savepoint_opt ::= SAVEPOINT", - /* 286 */ "savepoint_opt ::=", - /* 287 */ "cmd ::= create_table create_table_args", - /* 288 */ "columnlist ::= columnlist COMMA columnname carglist", - /* 289 */ "columnlist ::= columnname carglist", - /* 290 */ "nm ::= ID|INDEXED", - /* 291 */ "nm ::= STRING", - /* 292 */ "nm ::= JOIN_KW", - /* 293 */ "typetoken ::= typename", - /* 294 */ "typename ::= ID|STRING", - /* 295 */ "signed ::= plus_num", - /* 296 */ "signed ::= minus_num", - /* 297 */ "carglist ::= carglist ccons", - /* 298 */ "carglist ::=", - /* 299 */ "ccons ::= NULL onconf", - /* 300 */ "conslist_opt ::= COMMA conslist", - /* 301 */ "conslist ::= conslist tconscomma tcons", - /* 302 */ "conslist ::= tcons", - /* 303 */ "tconscomma ::=", - /* 304 */ "defer_subclause_opt ::= defer_subclause", - /* 305 */ "resolvetype ::= raisetype", - /* 306 */ "selectnowith ::= oneselect", - /* 307 */ "oneselect ::= values", - /* 308 */ "sclp ::= selcollist COMMA", - /* 309 */ "as ::= ID|STRING", - /* 310 */ "expr ::= term", - /* 311 */ "exprlist ::= nexprlist", - /* 312 */ "nmnum ::= plus_num", - /* 313 */ "nmnum ::= nm", - /* 314 */ "nmnum ::= ON", - /* 315 */ "nmnum ::= DELETE", - /* 316 */ "nmnum ::= DEFAULT", - /* 317 */ "plus_num ::= INTEGER|FLOAT", - /* 318 */ "foreach_clause ::=", - /* 319 */ "foreach_clause ::= FOR EACH ROW", - /* 320 */ "trnm ::= nm", - /* 321 */ "tridxby ::=", - /* 322 */ "database_kw_opt ::= DATABASE", - /* 323 */ "database_kw_opt ::=", - /* 324 */ "kwcolumn_opt ::=", - /* 325 */ "kwcolumn_opt ::= COLUMNKW", - /* 326 */ "vtabarglist ::= vtabarg", - /* 327 */ "vtabarglist ::= vtabarglist COMMA vtabarg", - /* 328 */ "vtabarg ::= vtabarg vtabargtoken", - /* 329 */ "anylist ::=", - /* 330 */ "anylist ::= anylist LP anylist RP", - /* 331 */ "anylist ::= anylist ANY", + /* 80 */ "select ::= WITH wqlist selectnowith", + /* 81 */ "select ::= WITH RECURSIVE wqlist selectnowith", + /* 82 */ "select ::= selectnowith", + /* 83 */ "selectnowith ::= selectnowith multiselect_op oneselect", + /* 84 */ "multiselect_op ::= UNION", + /* 85 */ "multiselect_op ::= UNION ALL", + /* 86 */ "multiselect_op ::= EXCEPT|INTERSECT", + /* 87 */ "oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt", + /* 88 */ "values ::= VALUES LP nexprlist RP", + /* 89 */ "values ::= values COMMA LP exprlist RP", + /* 90 */ "distinct ::= DISTINCT", + /* 91 */ "distinct ::= ALL", + /* 92 */ "distinct ::=", + /* 93 */ "sclp ::=", + /* 94 */ "selcollist ::= sclp scanpt expr scanpt as", + /* 95 */ "selcollist ::= sclp scanpt STAR", + /* 96 */ "selcollist ::= sclp scanpt nm DOT STAR", + /* 97 */ "as ::= AS nm", + /* 98 */ "as ::=", + /* 99 */ "from ::=", + /* 100 */ "from ::= FROM seltablist", + /* 101 */ "stl_prefix ::= seltablist joinop", + /* 102 */ "stl_prefix ::=", + /* 103 */ "seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt", + /* 104 */ "seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt", + /* 105 */ "seltablist ::= stl_prefix LP select RP as on_opt using_opt", + /* 106 */ "seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt", + /* 107 */ "dbnm ::=", + /* 108 */ "dbnm ::= DOT nm", + /* 109 */ "fullname ::= nm", + /* 110 */ "fullname ::= nm DOT nm", + /* 111 */ "xfullname ::= nm", + /* 112 */ "xfullname ::= nm DOT nm", + /* 113 */ "xfullname ::= nm DOT nm AS nm", + /* 114 */ "xfullname ::= nm AS nm", + /* 115 */ "joinop ::= COMMA|JOIN", + /* 116 */ "joinop ::= JOIN_KW JOIN", + /* 117 */ "joinop ::= JOIN_KW nm JOIN", + /* 118 */ "joinop ::= JOIN_KW nm nm JOIN", + /* 119 */ "on_opt ::= ON expr", + /* 120 */ "on_opt ::=", + /* 121 */ "indexed_opt ::=", + /* 122 */ "indexed_opt ::= INDEXED BY nm", + /* 123 */ "indexed_opt ::= NOT INDEXED", + /* 124 */ "using_opt ::= USING LP idlist RP", + /* 125 */ "using_opt ::=", + /* 126 */ "orderby_opt ::=", + /* 127 */ "orderby_opt ::= ORDER BY sortlist", + /* 128 */ "sortlist ::= sortlist COMMA expr sortorder", + /* 129 */ "sortlist ::= expr sortorder", + /* 130 */ "sortorder ::= ASC", + /* 131 */ "sortorder ::= DESC", + /* 132 */ "sortorder ::=", + /* 133 */ "groupby_opt ::=", + /* 134 */ "groupby_opt ::= GROUP BY nexprlist", + /* 135 */ "having_opt ::=", + /* 136 */ "having_opt ::= HAVING expr", + /* 137 */ "limit_opt ::=", + /* 138 */ "limit_opt ::= LIMIT expr", + /* 139 */ "limit_opt ::= LIMIT expr OFFSET expr", + /* 140 */ "limit_opt ::= LIMIT expr COMMA expr", + /* 141 */ "cmd ::= with DELETE FROM xfullname indexed_opt where_opt", + /* 142 */ "where_opt ::=", + /* 143 */ "where_opt ::= WHERE expr", + /* 144 */ "cmd ::= with UPDATE orconf xfullname indexed_opt SET setlist where_opt", + /* 145 */ "setlist ::= setlist COMMA nm EQ expr", + /* 146 */ "setlist ::= setlist COMMA LP idlist RP EQ expr", + /* 147 */ "setlist ::= nm EQ expr", + /* 148 */ "setlist ::= LP idlist RP EQ expr", + /* 149 */ "cmd ::= with insert_cmd INTO xfullname idlist_opt select upsert", + /* 150 */ "cmd ::= with insert_cmd INTO xfullname idlist_opt DEFAULT VALUES", + /* 151 */ "upsert ::=", + /* 152 */ "upsert ::= ON CONFLICT LP sortlist RP where_opt DO UPDATE SET setlist where_opt", + /* 153 */ "upsert ::= ON CONFLICT LP sortlist RP where_opt DO NOTHING", + /* 154 */ "upsert ::= ON CONFLICT DO NOTHING", + /* 155 */ "insert_cmd ::= INSERT orconf", + /* 156 */ "insert_cmd ::= REPLACE", + /* 157 */ "idlist_opt ::=", + /* 158 */ "idlist_opt ::= LP idlist RP", + /* 159 */ "idlist ::= idlist COMMA nm", + /* 160 */ "idlist ::= nm", + /* 161 */ "expr ::= LP expr RP", + /* 162 */ "expr ::= ID|INDEXED", + /* 163 */ "expr ::= JOIN_KW", + /* 164 */ "expr ::= nm DOT nm", + /* 165 */ "expr ::= nm DOT nm DOT nm", + /* 166 */ "term ::= NULL|FLOAT|BLOB", + /* 167 */ "term ::= STRING", + /* 168 */ "term ::= INTEGER", + /* 169 */ "expr ::= VARIABLE", + /* 170 */ "expr ::= expr COLLATE ID|STRING", + /* 171 */ "expr ::= CAST LP expr AS typetoken RP", + /* 172 */ "expr ::= ID|INDEXED LP distinct exprlist RP", + /* 173 */ "expr ::= ID|INDEXED LP STAR RP", + /* 174 */ "term ::= CTIME_KW", + /* 175 */ "expr ::= LP nexprlist COMMA expr RP", + /* 176 */ "expr ::= expr AND expr", + /* 177 */ "expr ::= expr OR expr", + /* 178 */ "expr ::= expr LT|GT|GE|LE expr", + /* 179 */ "expr ::= expr EQ|NE expr", + /* 180 */ "expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr", + /* 181 */ "expr ::= expr PLUS|MINUS expr", + /* 182 */ "expr ::= expr STAR|SLASH|REM expr", + /* 183 */ "expr ::= expr CONCAT expr", + /* 184 */ "likeop ::= NOT LIKE_KW|MATCH", + /* 185 */ "expr ::= expr likeop expr", + /* 186 */ "expr ::= expr likeop expr ESCAPE expr", + /* 187 */ "expr ::= expr ISNULL|NOTNULL", + /* 188 */ "expr ::= expr NOT NULL", + /* 189 */ "expr ::= expr IS expr", + /* 190 */ "expr ::= expr IS NOT expr", + /* 191 */ "expr ::= NOT expr", + /* 192 */ "expr ::= BITNOT expr", + /* 193 */ "expr ::= MINUS expr", + /* 194 */ "expr ::= PLUS expr", + /* 195 */ "between_op ::= BETWEEN", + /* 196 */ "between_op ::= NOT BETWEEN", + /* 197 */ "expr ::= expr between_op expr AND expr", + /* 198 */ "in_op ::= IN", + /* 199 */ "in_op ::= NOT IN", + /* 200 */ "expr ::= expr in_op LP exprlist RP", + /* 201 */ "expr ::= LP select RP", + /* 202 */ "expr ::= expr in_op LP select RP", + /* 203 */ "expr ::= expr in_op nm dbnm paren_exprlist", + /* 204 */ "expr ::= EXISTS LP select RP", + /* 205 */ "expr ::= CASE case_operand case_exprlist case_else END", + /* 206 */ "case_exprlist ::= case_exprlist WHEN expr THEN expr", + /* 207 */ "case_exprlist ::= WHEN expr THEN expr", + /* 208 */ "case_else ::= ELSE expr", + /* 209 */ "case_else ::=", + /* 210 */ "case_operand ::= expr", + /* 211 */ "case_operand ::=", + /* 212 */ "exprlist ::=", + /* 213 */ "nexprlist ::= nexprlist COMMA expr", + /* 214 */ "nexprlist ::= expr", + /* 215 */ "paren_exprlist ::=", + /* 216 */ "paren_exprlist ::= LP exprlist RP", + /* 217 */ "cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt", + /* 218 */ "uniqueflag ::= UNIQUE", + /* 219 */ "uniqueflag ::=", + /* 220 */ "eidlist_opt ::=", + /* 221 */ "eidlist_opt ::= LP eidlist RP", + /* 222 */ "eidlist ::= eidlist COMMA nm collate sortorder", + /* 223 */ "eidlist ::= nm collate sortorder", + /* 224 */ "collate ::=", + /* 225 */ "collate ::= COLLATE ID|STRING", + /* 226 */ "cmd ::= DROP INDEX ifexists fullname", + /* 227 */ "cmd ::= VACUUM", + /* 228 */ "cmd ::= VACUUM nm", + /* 229 */ "cmd ::= PRAGMA nm dbnm", + /* 230 */ "cmd ::= PRAGMA nm dbnm EQ nmnum", + /* 231 */ "cmd ::= PRAGMA nm dbnm LP nmnum RP", + /* 232 */ "cmd ::= PRAGMA nm dbnm EQ minus_num", + /* 233 */ "cmd ::= PRAGMA nm dbnm LP minus_num RP", + /* 234 */ "plus_num ::= PLUS INTEGER|FLOAT", + /* 235 */ "minus_num ::= MINUS INTEGER|FLOAT", + /* 236 */ "cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END", + /* 237 */ "trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause", + /* 238 */ "trigger_time ::= BEFORE|AFTER", + /* 239 */ "trigger_time ::= INSTEAD OF", + /* 240 */ "trigger_time ::=", + /* 241 */ "trigger_event ::= DELETE|INSERT", + /* 242 */ "trigger_event ::= UPDATE", + /* 243 */ "trigger_event ::= UPDATE OF idlist", + /* 244 */ "when_clause ::=", + /* 245 */ "when_clause ::= WHEN expr", + /* 246 */ "trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI", + /* 247 */ "trigger_cmd_list ::= trigger_cmd SEMI", + /* 248 */ "trnm ::= nm DOT nm", + /* 249 */ "tridxby ::= INDEXED BY nm", + /* 250 */ "tridxby ::= NOT INDEXED", + /* 251 */ "trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt", + /* 252 */ "trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select upsert scanpt", + /* 253 */ "trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt", + /* 254 */ "trigger_cmd ::= scanpt select scanpt", + /* 255 */ "expr ::= RAISE LP IGNORE RP", + /* 256 */ "expr ::= RAISE LP raisetype COMMA nm RP", + /* 257 */ "raisetype ::= ROLLBACK", + /* 258 */ "raisetype ::= ABORT", + /* 259 */ "raisetype ::= FAIL", + /* 260 */ "cmd ::= DROP TRIGGER ifexists fullname", + /* 261 */ "cmd ::= ATTACH database_kw_opt expr AS expr key_opt", + /* 262 */ "cmd ::= DETACH database_kw_opt expr", + /* 263 */ "key_opt ::=", + /* 264 */ "key_opt ::= KEY expr", + /* 265 */ "cmd ::= REINDEX", + /* 266 */ "cmd ::= REINDEX nm dbnm", + /* 267 */ "cmd ::= ANALYZE", + /* 268 */ "cmd ::= ANALYZE nm dbnm", + /* 269 */ "cmd ::= ALTER TABLE fullname RENAME TO nm", + /* 270 */ "cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist", + /* 271 */ "add_column_fullname ::= fullname", + /* 272 */ "cmd ::= create_vtab", + /* 273 */ "cmd ::= create_vtab LP vtabarglist RP", + /* 274 */ "create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm", + /* 275 */ "vtabarg ::=", + /* 276 */ "vtabargtoken ::= ANY", + /* 277 */ "vtabargtoken ::= lp anylist RP", + /* 278 */ "lp ::= LP", + /* 279 */ "with ::= WITH wqlist", + /* 280 */ "with ::= WITH RECURSIVE wqlist", + /* 281 */ "wqlist ::= nm eidlist_opt AS LP select RP", + /* 282 */ "wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP", + /* 283 */ "input ::= cmdlist", + /* 284 */ "cmdlist ::= cmdlist ecmd", + /* 285 */ "cmdlist ::= ecmd", + /* 286 */ "ecmd ::= SEMI", + /* 287 */ "ecmd ::= cmdx SEMI", + /* 288 */ "ecmd ::= explain cmdx", + /* 289 */ "trans_opt ::=", + /* 290 */ "trans_opt ::= TRANSACTION", + /* 291 */ "trans_opt ::= TRANSACTION nm", + /* 292 */ "savepoint_opt ::= SAVEPOINT", + /* 293 */ "savepoint_opt ::=", + /* 294 */ "cmd ::= create_table create_table_args", + /* 295 */ "columnlist ::= columnlist COMMA columnname carglist", + /* 296 */ "columnlist ::= columnname carglist", + /* 297 */ "nm ::= ID|INDEXED", + /* 298 */ "nm ::= STRING", + /* 299 */ "nm ::= JOIN_KW", + /* 300 */ "typetoken ::= typename", + /* 301 */ "typename ::= ID|STRING", + /* 302 */ "signed ::= plus_num", + /* 303 */ "signed ::= minus_num", + /* 304 */ "carglist ::= carglist ccons", + /* 305 */ "carglist ::=", + /* 306 */ "ccons ::= NULL onconf", + /* 307 */ "conslist_opt ::= COMMA conslist", + /* 308 */ "conslist ::= conslist tconscomma tcons", + /* 309 */ "conslist ::= tcons", + /* 310 */ "tconscomma ::=", + /* 311 */ "defer_subclause_opt ::= defer_subclause", + /* 312 */ "resolvetype ::= raisetype", + /* 313 */ "selectnowith ::= oneselect", + /* 314 */ "oneselect ::= values", + /* 315 */ "sclp ::= selcollist COMMA", + /* 316 */ "as ::= ID|STRING", + /* 317 */ "expr ::= term", + /* 318 */ "likeop ::= LIKE_KW|MATCH", + /* 319 */ "exprlist ::= nexprlist", + /* 320 */ "nmnum ::= plus_num", + /* 321 */ "nmnum ::= nm", + /* 322 */ "nmnum ::= ON", + /* 323 */ "nmnum ::= DELETE", + /* 324 */ "nmnum ::= DEFAULT", + /* 325 */ "plus_num ::= INTEGER|FLOAT", + /* 326 */ "foreach_clause ::=", + /* 327 */ "foreach_clause ::= FOR EACH ROW", + /* 328 */ "trnm ::= nm", + /* 329 */ "tridxby ::=", + /* 330 */ "database_kw_opt ::= DATABASE", + /* 331 */ "database_kw_opt ::=", + /* 332 */ "kwcolumn_opt ::=", + /* 333 */ "kwcolumn_opt ::= COLUMNKW", + /* 334 */ "vtabarglist ::= vtabarg", + /* 335 */ "vtabarglist ::= vtabarglist COMMA vtabarg", + /* 336 */ "vtabarg ::= vtabarg vtabargtoken", + /* 337 */ "anylist ::=", + /* 338 */ "anylist ::= anylist LP anylist RP", + /* 339 */ "anylist ::= anylist ANY", + /* 340 */ "with ::=", }; #endif /* NDEBUG */ @@ -135811,26 +143059,30 @@ static int yyGrowStack(yyParser *p){ /* Initialize a new parser that has already been allocated. */ -SQLITE_PRIVATE void sqlite3ParserInit(void *yypParser){ - yyParser *pParser = (yyParser*)yypParser; +SQLITE_PRIVATE void sqlite3ParserInit(void *yypRawParser sqlite3ParserCTX_PDECL){ + yyParser *yypParser = (yyParser*)yypRawParser; + sqlite3ParserCTX_STORE #ifdef YYTRACKMAXSTACKDEPTH - pParser->yyhwm = 0; + yypParser->yyhwm = 0; #endif #if YYSTACKDEPTH<=0 - pParser->yytos = NULL; - pParser->yystack = NULL; - pParser->yystksz = 0; - if( yyGrowStack(pParser) ){ - pParser->yystack = &pParser->yystk0; - pParser->yystksz = 1; + yypParser->yytos = NULL; + yypParser->yystack = NULL; + yypParser->yystksz = 0; + if( yyGrowStack(yypParser) ){ + yypParser->yystack = &yypParser->yystk0; + yypParser->yystksz = 1; } #endif #ifndef YYNOERRORRECOVERY - pParser->yyerrcnt = -1; + yypParser->yyerrcnt = -1; +#endif + yypParser->yytos = yypParser->yystack; + yypParser->yystack[0].stateno = 0; + yypParser->yystack[0].major = 0; +#if YYSTACKDEPTH>0 + yypParser->yystackEnd = &yypParser->yystack[YYSTACKDEPTH-1]; #endif - pParser->yytos = pParser->yystack; - pParser->yystack[0].stateno = 0; - pParser->yystack[0].major = 0; } #ifndef sqlite3Parser_ENGINEALWAYSONSTACK @@ -135846,11 +143098,14 @@ SQLITE_PRIVATE void sqlite3ParserInit(void *yypParser){ ** A pointer to a parser. This pointer is used in subsequent calls ** to sqlite3Parser and sqlite3ParserFree. */ -SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(YYMALLOCARGTYPE)){ - yyParser *pParser; - pParser = (yyParser*)(*mallocProc)( (YYMALLOCARGTYPE)sizeof(yyParser) ); - if( pParser ) sqlite3ParserInit(pParser); - return pParser; +SQLITE_PRIVATE void *sqlite3ParserAlloc(void *(*mallocProc)(YYMALLOCARGTYPE) sqlite3ParserCTX_PDECL){ + yyParser *yypParser; + yypParser = (yyParser*)(*mallocProc)( (YYMALLOCARGTYPE)sizeof(yyParser) ); + if( yypParser ){ + sqlite3ParserCTX_STORE + sqlite3ParserInit(yypParser sqlite3ParserCTX_PARAM); + } + return (void*)yypParser; } #endif /* sqlite3Parser_ENGINEALWAYSONSTACK */ @@ -135867,7 +143122,8 @@ static void yy_destructor( YYCODETYPE yymajor, /* Type code for object to destroy */ YYMINORTYPE *yypminor /* The object to be destroyed */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH switch( yymajor ){ /* Here is inserted the actions which take place when a ** terminal or non-terminal is destroyed. This can happen @@ -135880,77 +143136,73 @@ static void yy_destructor( ** inside the C code. */ /********* Begin destructor definitions ***************************************/ - case 163: /* select */ - case 194: /* selectnowith */ - case 195: /* oneselect */ - case 206: /* values */ -{ -sqlite3SelectDelete(pParse->db, (yypminor->yy243)); -} - break; - case 172: /* term */ - case 173: /* expr */ + case 164: /* select */ + case 196: /* selectnowith */ + case 197: /* oneselect */ + case 208: /* values */ { -sqlite3ExprDelete(pParse->db, (yypminor->yy190).pExpr); +sqlite3SelectDelete(pParse->db, (yypminor->yy399)); } break; - case 177: /* eidlist_opt */ - case 186: /* sortlist */ - case 187: /* eidlist */ - case 199: /* selcollist */ - case 202: /* groupby_opt */ - case 204: /* orderby_opt */ - case 207: /* nexprlist */ - case 208: /* exprlist */ - case 209: /* sclp */ - case 218: /* setlist */ - case 224: /* paren_exprlist */ - case 226: /* case_exprlist */ + case 174: /* term */ + case 175: /* expr */ + case 203: /* where_opt */ + case 205: /* having_opt */ + case 217: /* on_opt */ + case 230: /* case_operand */ + case 232: /* case_else */ + case 241: /* when_clause */ + case 246: /* key_opt */ { -sqlite3ExprListDelete(pParse->db, (yypminor->yy148)); +sqlite3ExprDelete(pParse->db, (yypminor->yy182)); } break; - case 193: /* fullname */ - case 200: /* from */ - case 211: /* seltablist */ - case 212: /* stl_prefix */ + case 179: /* eidlist_opt */ + case 188: /* sortlist */ + case 189: /* eidlist */ + case 201: /* selcollist */ + case 204: /* groupby_opt */ + case 206: /* orderby_opt */ + case 209: /* nexprlist */ + case 210: /* exprlist */ + case 211: /* sclp */ + case 222: /* setlist */ + case 229: /* paren_exprlist */ + case 231: /* case_exprlist */ { -sqlite3SrcListDelete(pParse->db, (yypminor->yy185)); +sqlite3ExprListDelete(pParse->db, (yypminor->yy232)); } break; - case 196: /* with */ - case 250: /* wqlist */ + case 195: /* fullname */ + case 202: /* from */ + case 213: /* seltablist */ + case 214: /* stl_prefix */ + case 219: /* xfullname */ { -sqlite3WithDelete(pParse->db, (yypminor->yy285)); +sqlite3SrcListDelete(pParse->db, (yypminor->yy427)); } break; - case 201: /* where_opt */ - case 203: /* having_opt */ - case 215: /* on_opt */ - case 225: /* case_operand */ - case 227: /* case_else */ - case 236: /* when_clause */ - case 241: /* key_opt */ + case 198: /* wqlist */ { -sqlite3ExprDelete(pParse->db, (yypminor->yy72)); +sqlite3WithDelete(pParse->db, (yypminor->yy91)); } break; - case 216: /* using_opt */ - case 217: /* idlist */ - case 220: /* idlist_opt */ + case 218: /* using_opt */ + case 220: /* idlist */ + case 224: /* idlist_opt */ { -sqlite3IdListDelete(pParse->db, (yypminor->yy254)); +sqlite3IdListDelete(pParse->db, (yypminor->yy510)); } break; - case 232: /* trigger_cmd_list */ - case 237: /* trigger_cmd */ + case 237: /* trigger_cmd_list */ + case 242: /* trigger_cmd */ { -sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy145)); +sqlite3DeleteTriggerStep(pParse->db, (yypminor->yy47)); } break; - case 234: /* trigger_event */ + case 239: /* trigger_event */ { -sqlite3IdListDelete(pParse->db, (yypminor->yy332).b); +sqlite3IdListDelete(pParse->db, (yypminor->yy300).b); } break; /********* End destructor definitions *****************************************/ @@ -136021,24 +143273,66 @@ SQLITE_PRIVATE int sqlite3ParserStackPeak(void *p){ } #endif +/* This array of booleans keeps track of the parser statement +** coverage. The element yycoverage[X][Y] is set when the parser +** is in state X and has a lookahead token Y. In a well-tested +** systems, every element of this matrix should end up being set. +*/ +#if defined(YYCOVERAGE) +static unsigned char yycoverage[YYNSTATE][YYNTOKEN]; +#endif + +/* +** Write into out a description of every state/lookahead combination that +** +** (1) has not been used by the parser, and +** (2) is not a syntax error. +** +** Return the number of missed state/lookahead combinations. +*/ +#if defined(YYCOVERAGE) +SQLITE_PRIVATE int sqlite3ParserCoverage(FILE *out){ + int stateno, iLookAhead, i; + int nMissed = 0; + for(stateno=0; stateno<YYNSTATE; stateno++){ + i = yy_shift_ofst[stateno]; + for(iLookAhead=0; iLookAhead<YYNTOKEN; iLookAhead++){ + if( yy_lookahead[i+iLookAhead]!=iLookAhead ) continue; + if( yycoverage[stateno][iLookAhead]==0 ) nMissed++; + if( out ){ + fprintf(out,"State %d lookahead %s %s\n", stateno, + yyTokenName[iLookAhead], + yycoverage[stateno][iLookAhead] ? "ok" : "missed"); + } + } + } + return nMissed; +} +#endif + /* ** Find the appropriate action for a parser given the terminal ** look-ahead token iLookAhead. */ -static unsigned int yy_find_shift_action( - yyParser *pParser, /* The parser */ - YYCODETYPE iLookAhead /* The look-ahead token */ +static YYACTIONTYPE yy_find_shift_action( + YYCODETYPE iLookAhead, /* The look-ahead token */ + YYACTIONTYPE stateno /* Current state number */ ){ int i; - int stateno = pParser->yytos->stateno; - - if( stateno>=YY_MIN_REDUCE ) return stateno; + + if( stateno>YY_MAX_SHIFT ) return stateno; assert( stateno <= YY_SHIFT_COUNT ); +#if defined(YYCOVERAGE) + yycoverage[stateno][iLookAhead] = 1; +#endif do{ i = yy_shift_ofst[stateno]; + assert( i>=0 ); + assert( i+YYNTOKEN<=(int)sizeof(yy_lookahead)/sizeof(yy_lookahead[0]) ); assert( iLookAhead!=YYNOCODE ); + assert( iLookAhead < YYNTOKEN ); i += iLookAhead; - if( i<0 || i>=YY_ACTTAB_COUNT || yy_lookahead[i]!=iLookAhead ){ + if( yy_lookahead[i]!=iLookAhead ){ #ifdef YYFALLBACK YYCODETYPE iFallback; /* Fallback token */ if( iLookAhead<sizeof(yyFallback)/sizeof(yyFallback[0]) @@ -136089,7 +143383,7 @@ static unsigned int yy_find_shift_action( ** look-ahead token iLookAhead. */ static int yy_find_reduce_action( - int stateno, /* Current state number */ + YYACTIONTYPE stateno, /* Current state number */ YYCODETYPE iLookAhead /* The look-ahead token */ ){ int i; @@ -136101,7 +143395,6 @@ static int yy_find_reduce_action( assert( stateno<=YY_REDUCE_COUNT ); #endif i = yy_reduce_ofst[stateno]; - assert( i!=YY_REDUCE_USE_DFLT ); assert( iLookAhead!=YYNOCODE ); i += iLookAhead; #ifdef YYERRORSYMBOL @@ -136119,7 +143412,8 @@ static int yy_find_reduce_action( ** The following routine is called if the stack overflows. */ static void yyStackOverflow(yyParser *yypParser){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #ifndef NDEBUG if( yyTraceFILE ){ fprintf(yyTraceFILE,"%sStack Overflow!\n",yyTracePrompt); @@ -136132,27 +143426,29 @@ static void yyStackOverflow(yyParser *yypParser){ sqlite3ErrorMsg(pParse, "parser stack overflow"); /******** End %stack_overflow code ********************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument var */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument var */ + sqlite3ParserCTX_STORE } /* ** Print tracing information for a SHIFT action */ #ifndef NDEBUG -static void yyTraceShift(yyParser *yypParser, int yyNewState){ +static void yyTraceShift(yyParser *yypParser, int yyNewState, const char *zTag){ if( yyTraceFILE ){ if( yyNewState<YYNSTATE ){ - fprintf(yyTraceFILE,"%sShift '%s', go to state %d\n", - yyTracePrompt,yyTokenName[yypParser->yytos->major], + fprintf(yyTraceFILE,"%s%s '%s', go to state %d\n", + yyTracePrompt, zTag, yyTokenName[yypParser->yytos->major], yyNewState); }else{ - fprintf(yyTraceFILE,"%sShift '%s'\n", - yyTracePrompt,yyTokenName[yypParser->yytos->major]); + fprintf(yyTraceFILE,"%s%s '%s', pending reduce %d\n", + yyTracePrompt, zTag, yyTokenName[yypParser->yytos->major], + yyNewState - YY_MIN_REDUCE); } } } #else -# define yyTraceShift(X,Y) +# define yyTraceShift(X,Y,Z) #endif /* @@ -136160,8 +143456,8 @@ static void yyTraceShift(yyParser *yypParser, int yyNewState){ */ static void yy_shift( yyParser *yypParser, /* The parser to be shifted */ - int yyNewState, /* The new state to shift in */ - int yyMajor, /* The major token to shift in */ + YYACTIONTYPE yyNewState, /* The new state to shift in */ + YYCODETYPE yyMajor, /* The major token to shift in */ sqlite3ParserTOKENTYPE yyMinor /* The minor token to shift in */ ){ yyStackEntry *yytos; @@ -136173,7 +143469,7 @@ static void yy_shift( } #endif #if YYSTACKDEPTH>0 - if( yypParser->yytos>=&yypParser->yystack[YYSTACKDEPTH] ){ + if( yypParser->yytos>yypParser->yystackEnd ){ yypParser->yytos--; yyStackOverflow(yypParser); return; @@ -136191,351 +143487,360 @@ static void yy_shift( yyNewState += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE; } yytos = yypParser->yytos; - yytos->stateno = (YYACTIONTYPE)yyNewState; - yytos->major = (YYCODETYPE)yyMajor; + yytos->stateno = yyNewState; + yytos->major = yyMajor; yytos->minor.yy0 = yyMinor; - yyTraceShift(yypParser, yyNewState); + yyTraceShift(yypParser, yyNewState, "Shift"); } /* The following table contains information about every rule that ** is used during the reduce. */ static const struct { - YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ - unsigned char nrhs; /* Number of right-hand side symbols in the rule */ + YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ + signed char nrhs; /* Negative of the number of RHS symbols in the rule */ } yyRuleInfo[] = { - { 147, 1 }, - { 147, 3 }, - { 148, 1 }, - { 149, 3 }, - { 150, 0 }, - { 150, 1 }, - { 150, 1 }, - { 150, 1 }, - { 149, 2 }, - { 149, 2 }, - { 149, 2 }, - { 149, 2 }, - { 149, 3 }, - { 149, 5 }, - { 154, 6 }, - { 156, 1 }, - { 158, 0 }, - { 158, 3 }, - { 157, 1 }, - { 157, 0 }, - { 155, 5 }, - { 155, 2 }, - { 162, 0 }, - { 162, 2 }, - { 164, 2 }, - { 166, 0 }, - { 166, 4 }, - { 166, 6 }, - { 167, 2 }, - { 171, 2 }, - { 171, 2 }, - { 171, 4 }, - { 171, 3 }, - { 171, 3 }, - { 171, 2 }, - { 171, 3 }, - { 171, 5 }, - { 171, 2 }, - { 171, 4 }, - { 171, 4 }, - { 171, 1 }, - { 171, 2 }, - { 176, 0 }, - { 176, 1 }, - { 178, 0 }, - { 178, 2 }, - { 180, 2 }, - { 180, 3 }, - { 180, 3 }, - { 180, 3 }, - { 181, 2 }, - { 181, 2 }, - { 181, 1 }, - { 181, 1 }, - { 181, 2 }, - { 179, 3 }, - { 179, 2 }, - { 182, 0 }, - { 182, 2 }, - { 182, 2 }, - { 161, 0 }, - { 184, 1 }, - { 185, 2 }, - { 185, 7 }, - { 185, 5 }, - { 185, 5 }, - { 185, 10 }, - { 188, 0 }, - { 174, 0 }, - { 174, 3 }, - { 189, 0 }, - { 189, 2 }, - { 190, 1 }, - { 190, 1 }, - { 149, 4 }, - { 192, 2 }, - { 192, 0 }, - { 149, 9 }, - { 149, 4 }, - { 149, 1 }, - { 163, 2 }, - { 194, 3 }, - { 197, 1 }, - { 197, 2 }, - { 197, 1 }, - { 195, 9 }, - { 206, 4 }, - { 206, 5 }, - { 198, 1 }, - { 198, 1 }, - { 198, 0 }, - { 209, 0 }, - { 199, 3 }, - { 199, 2 }, - { 199, 4 }, - { 210, 2 }, - { 210, 0 }, - { 200, 0 }, - { 200, 2 }, - { 212, 2 }, - { 212, 0 }, - { 211, 7 }, - { 211, 9 }, - { 211, 7 }, - { 211, 7 }, - { 159, 0 }, - { 159, 2 }, - { 193, 2 }, - { 213, 1 }, - { 213, 2 }, - { 213, 3 }, - { 213, 4 }, - { 215, 2 }, - { 215, 0 }, - { 214, 0 }, - { 214, 3 }, - { 214, 2 }, - { 216, 4 }, - { 216, 0 }, - { 204, 0 }, - { 204, 3 }, - { 186, 4 }, - { 186, 2 }, - { 175, 1 }, - { 175, 1 }, - { 175, 0 }, - { 202, 0 }, - { 202, 3 }, - { 203, 0 }, - { 203, 2 }, - { 205, 0 }, - { 205, 2 }, - { 205, 4 }, - { 205, 4 }, - { 149, 6 }, - { 201, 0 }, - { 201, 2 }, - { 149, 8 }, - { 218, 5 }, - { 218, 7 }, - { 218, 3 }, - { 218, 5 }, - { 149, 6 }, - { 149, 7 }, - { 219, 2 }, - { 219, 1 }, - { 220, 0 }, - { 220, 3 }, - { 217, 3 }, - { 217, 1 }, - { 173, 3 }, - { 172, 1 }, - { 173, 1 }, - { 173, 1 }, - { 173, 3 }, - { 173, 5 }, - { 172, 1 }, - { 172, 1 }, - { 172, 1 }, - { 173, 1 }, - { 173, 3 }, - { 173, 6 }, - { 173, 5 }, - { 173, 4 }, - { 172, 1 }, - { 173, 5 }, - { 173, 3 }, - { 173, 3 }, - { 173, 3 }, - { 173, 3 }, - { 173, 3 }, - { 173, 3 }, - { 173, 3 }, - { 173, 3 }, - { 221, 1 }, - { 221, 2 }, - { 173, 3 }, - { 173, 5 }, - { 173, 2 }, - { 173, 3 }, - { 173, 3 }, - { 173, 4 }, - { 173, 2 }, - { 173, 2 }, - { 173, 2 }, - { 173, 2 }, - { 222, 1 }, - { 222, 2 }, - { 173, 5 }, - { 223, 1 }, - { 223, 2 }, - { 173, 5 }, - { 173, 3 }, - { 173, 5 }, - { 173, 5 }, - { 173, 4 }, - { 173, 5 }, - { 226, 5 }, - { 226, 4 }, - { 227, 2 }, - { 227, 0 }, - { 225, 1 }, - { 225, 0 }, - { 208, 0 }, - { 207, 3 }, - { 207, 1 }, - { 224, 0 }, - { 224, 3 }, - { 149, 12 }, - { 228, 1 }, - { 228, 0 }, - { 177, 0 }, - { 177, 3 }, - { 187, 5 }, - { 187, 3 }, - { 229, 0 }, - { 229, 2 }, - { 149, 4 }, - { 149, 1 }, - { 149, 2 }, - { 149, 3 }, - { 149, 5 }, - { 149, 6 }, - { 149, 5 }, - { 149, 6 }, - { 169, 2 }, - { 170, 2 }, - { 149, 5 }, - { 231, 11 }, - { 233, 1 }, - { 233, 1 }, - { 233, 2 }, - { 233, 0 }, - { 234, 1 }, - { 234, 1 }, - { 234, 3 }, - { 236, 0 }, - { 236, 2 }, - { 232, 3 }, - { 232, 2 }, - { 238, 3 }, - { 239, 3 }, - { 239, 2 }, - { 237, 7 }, - { 237, 5 }, - { 237, 5 }, - { 237, 1 }, - { 173, 4 }, - { 173, 6 }, - { 191, 1 }, - { 191, 1 }, - { 191, 1 }, - { 149, 4 }, - { 149, 6 }, - { 149, 3 }, - { 241, 0 }, - { 241, 2 }, - { 149, 1 }, - { 149, 3 }, - { 149, 1 }, - { 149, 3 }, - { 149, 6 }, - { 149, 7 }, - { 242, 1 }, - { 149, 1 }, - { 149, 4 }, - { 244, 8 }, - { 246, 0 }, - { 247, 1 }, - { 247, 3 }, - { 248, 1 }, - { 196, 0 }, - { 196, 2 }, - { 196, 3 }, - { 250, 6 }, - { 250, 8 }, - { 144, 1 }, - { 145, 2 }, - { 145, 1 }, - { 146, 1 }, - { 146, 3 }, - { 147, 0 }, - { 151, 0 }, - { 151, 1 }, - { 151, 2 }, - { 153, 1 }, - { 153, 0 }, - { 149, 2 }, - { 160, 4 }, - { 160, 2 }, - { 152, 1 }, - { 152, 1 }, - { 152, 1 }, - { 166, 1 }, - { 167, 1 }, - { 168, 1 }, - { 168, 1 }, - { 165, 2 }, - { 165, 0 }, - { 171, 2 }, - { 161, 2 }, - { 183, 3 }, - { 183, 1 }, - { 184, 0 }, - { 188, 1 }, - { 190, 1 }, - { 194, 1 }, - { 195, 1 }, - { 209, 2 }, - { 210, 1 }, - { 173, 1 }, - { 208, 1 }, - { 230, 1 }, - { 230, 1 }, - { 230, 1 }, - { 230, 1 }, - { 230, 1 }, - { 169, 1 }, - { 235, 0 }, - { 235, 3 }, - { 238, 1 }, - { 239, 0 }, - { 240, 1 }, - { 240, 0 }, - { 243, 0 }, - { 243, 1 }, - { 245, 1 }, - { 245, 3 }, - { 246, 2 }, - { 249, 0 }, - { 249, 4 }, - { 249, 2 }, + { 149, -1 }, /* (0) explain ::= EXPLAIN */ + { 149, -3 }, /* (1) explain ::= EXPLAIN QUERY PLAN */ + { 148, -1 }, /* (2) cmdx ::= cmd */ + { 150, -3 }, /* (3) cmd ::= BEGIN transtype trans_opt */ + { 151, 0 }, /* (4) transtype ::= */ + { 151, -1 }, /* (5) transtype ::= DEFERRED */ + { 151, -1 }, /* (6) transtype ::= IMMEDIATE */ + { 151, -1 }, /* (7) transtype ::= EXCLUSIVE */ + { 150, -2 }, /* (8) cmd ::= COMMIT|END trans_opt */ + { 150, -2 }, /* (9) cmd ::= ROLLBACK trans_opt */ + { 150, -2 }, /* (10) cmd ::= SAVEPOINT nm */ + { 150, -3 }, /* (11) cmd ::= RELEASE savepoint_opt nm */ + { 150, -5 }, /* (12) cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */ + { 155, -6 }, /* (13) create_table ::= createkw temp TABLE ifnotexists nm dbnm */ + { 157, -1 }, /* (14) createkw ::= CREATE */ + { 159, 0 }, /* (15) ifnotexists ::= */ + { 159, -3 }, /* (16) ifnotexists ::= IF NOT EXISTS */ + { 158, -1 }, /* (17) temp ::= TEMP */ + { 158, 0 }, /* (18) temp ::= */ + { 156, -5 }, /* (19) create_table_args ::= LP columnlist conslist_opt RP table_options */ + { 156, -2 }, /* (20) create_table_args ::= AS select */ + { 163, 0 }, /* (21) table_options ::= */ + { 163, -2 }, /* (22) table_options ::= WITHOUT nm */ + { 165, -2 }, /* (23) columnname ::= nm typetoken */ + { 167, 0 }, /* (24) typetoken ::= */ + { 167, -4 }, /* (25) typetoken ::= typename LP signed RP */ + { 167, -6 }, /* (26) typetoken ::= typename LP signed COMMA signed RP */ + { 168, -2 }, /* (27) typename ::= typename ID|STRING */ + { 172, 0 }, /* (28) scanpt ::= */ + { 173, -2 }, /* (29) ccons ::= CONSTRAINT nm */ + { 173, -4 }, /* (30) ccons ::= DEFAULT scanpt term scanpt */ + { 173, -4 }, /* (31) ccons ::= DEFAULT LP expr RP */ + { 173, -4 }, /* (32) ccons ::= DEFAULT PLUS term scanpt */ + { 173, -4 }, /* (33) ccons ::= DEFAULT MINUS term scanpt */ + { 173, -3 }, /* (34) ccons ::= DEFAULT scanpt ID|INDEXED */ + { 173, -3 }, /* (35) ccons ::= NOT NULL onconf */ + { 173, -5 }, /* (36) ccons ::= PRIMARY KEY sortorder onconf autoinc */ + { 173, -2 }, /* (37) ccons ::= UNIQUE onconf */ + { 173, -4 }, /* (38) ccons ::= CHECK LP expr RP */ + { 173, -4 }, /* (39) ccons ::= REFERENCES nm eidlist_opt refargs */ + { 173, -1 }, /* (40) ccons ::= defer_subclause */ + { 173, -2 }, /* (41) ccons ::= COLLATE ID|STRING */ + { 178, 0 }, /* (42) autoinc ::= */ + { 178, -1 }, /* (43) autoinc ::= AUTOINCR */ + { 180, 0 }, /* (44) refargs ::= */ + { 180, -2 }, /* (45) refargs ::= refargs refarg */ + { 182, -2 }, /* (46) refarg ::= MATCH nm */ + { 182, -3 }, /* (47) refarg ::= ON INSERT refact */ + { 182, -3 }, /* (48) refarg ::= ON DELETE refact */ + { 182, -3 }, /* (49) refarg ::= ON UPDATE refact */ + { 183, -2 }, /* (50) refact ::= SET NULL */ + { 183, -2 }, /* (51) refact ::= SET DEFAULT */ + { 183, -1 }, /* (52) refact ::= CASCADE */ + { 183, -1 }, /* (53) refact ::= RESTRICT */ + { 183, -2 }, /* (54) refact ::= NO ACTION */ + { 181, -3 }, /* (55) defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ + { 181, -2 }, /* (56) defer_subclause ::= DEFERRABLE init_deferred_pred_opt */ + { 184, 0 }, /* (57) init_deferred_pred_opt ::= */ + { 184, -2 }, /* (58) init_deferred_pred_opt ::= INITIALLY DEFERRED */ + { 184, -2 }, /* (59) init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ + { 162, 0 }, /* (60) conslist_opt ::= */ + { 186, -1 }, /* (61) tconscomma ::= COMMA */ + { 187, -2 }, /* (62) tcons ::= CONSTRAINT nm */ + { 187, -7 }, /* (63) tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */ + { 187, -5 }, /* (64) tcons ::= UNIQUE LP sortlist RP onconf */ + { 187, -5 }, /* (65) tcons ::= CHECK LP expr RP onconf */ + { 187, -10 }, /* (66) tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */ + { 190, 0 }, /* (67) defer_subclause_opt ::= */ + { 176, 0 }, /* (68) onconf ::= */ + { 176, -3 }, /* (69) onconf ::= ON CONFLICT resolvetype */ + { 191, 0 }, /* (70) orconf ::= */ + { 191, -2 }, /* (71) orconf ::= OR resolvetype */ + { 192, -1 }, /* (72) resolvetype ::= IGNORE */ + { 192, -1 }, /* (73) resolvetype ::= REPLACE */ + { 150, -4 }, /* (74) cmd ::= DROP TABLE ifexists fullname */ + { 194, -2 }, /* (75) ifexists ::= IF EXISTS */ + { 194, 0 }, /* (76) ifexists ::= */ + { 150, -9 }, /* (77) cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */ + { 150, -4 }, /* (78) cmd ::= DROP VIEW ifexists fullname */ + { 150, -1 }, /* (79) cmd ::= select */ + { 164, -3 }, /* (80) select ::= WITH wqlist selectnowith */ + { 164, -4 }, /* (81) select ::= WITH RECURSIVE wqlist selectnowith */ + { 164, -1 }, /* (82) select ::= selectnowith */ + { 196, -3 }, /* (83) selectnowith ::= selectnowith multiselect_op oneselect */ + { 199, -1 }, /* (84) multiselect_op ::= UNION */ + { 199, -2 }, /* (85) multiselect_op ::= UNION ALL */ + { 199, -1 }, /* (86) multiselect_op ::= EXCEPT|INTERSECT */ + { 197, -9 }, /* (87) oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ + { 208, -4 }, /* (88) values ::= VALUES LP nexprlist RP */ + { 208, -5 }, /* (89) values ::= values COMMA LP exprlist RP */ + { 200, -1 }, /* (90) distinct ::= DISTINCT */ + { 200, -1 }, /* (91) distinct ::= ALL */ + { 200, 0 }, /* (92) distinct ::= */ + { 211, 0 }, /* (93) sclp ::= */ + { 201, -5 }, /* (94) selcollist ::= sclp scanpt expr scanpt as */ + { 201, -3 }, /* (95) selcollist ::= sclp scanpt STAR */ + { 201, -5 }, /* (96) selcollist ::= sclp scanpt nm DOT STAR */ + { 212, -2 }, /* (97) as ::= AS nm */ + { 212, 0 }, /* (98) as ::= */ + { 202, 0 }, /* (99) from ::= */ + { 202, -2 }, /* (100) from ::= FROM seltablist */ + { 214, -2 }, /* (101) stl_prefix ::= seltablist joinop */ + { 214, 0 }, /* (102) stl_prefix ::= */ + { 213, -7 }, /* (103) seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ + { 213, -9 }, /* (104) seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */ + { 213, -7 }, /* (105) seltablist ::= stl_prefix LP select RP as on_opt using_opt */ + { 213, -7 }, /* (106) seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ + { 160, 0 }, /* (107) dbnm ::= */ + { 160, -2 }, /* (108) dbnm ::= DOT nm */ + { 195, -1 }, /* (109) fullname ::= nm */ + { 195, -3 }, /* (110) fullname ::= nm DOT nm */ + { 219, -1 }, /* (111) xfullname ::= nm */ + { 219, -3 }, /* (112) xfullname ::= nm DOT nm */ + { 219, -5 }, /* (113) xfullname ::= nm DOT nm AS nm */ + { 219, -3 }, /* (114) xfullname ::= nm AS nm */ + { 215, -1 }, /* (115) joinop ::= COMMA|JOIN */ + { 215, -2 }, /* (116) joinop ::= JOIN_KW JOIN */ + { 215, -3 }, /* (117) joinop ::= JOIN_KW nm JOIN */ + { 215, -4 }, /* (118) joinop ::= JOIN_KW nm nm JOIN */ + { 217, -2 }, /* (119) on_opt ::= ON expr */ + { 217, 0 }, /* (120) on_opt ::= */ + { 216, 0 }, /* (121) indexed_opt ::= */ + { 216, -3 }, /* (122) indexed_opt ::= INDEXED BY nm */ + { 216, -2 }, /* (123) indexed_opt ::= NOT INDEXED */ + { 218, -4 }, /* (124) using_opt ::= USING LP idlist RP */ + { 218, 0 }, /* (125) using_opt ::= */ + { 206, 0 }, /* (126) orderby_opt ::= */ + { 206, -3 }, /* (127) orderby_opt ::= ORDER BY sortlist */ + { 188, -4 }, /* (128) sortlist ::= sortlist COMMA expr sortorder */ + { 188, -2 }, /* (129) sortlist ::= expr sortorder */ + { 177, -1 }, /* (130) sortorder ::= ASC */ + { 177, -1 }, /* (131) sortorder ::= DESC */ + { 177, 0 }, /* (132) sortorder ::= */ + { 204, 0 }, /* (133) groupby_opt ::= */ + { 204, -3 }, /* (134) groupby_opt ::= GROUP BY nexprlist */ + { 205, 0 }, /* (135) having_opt ::= */ + { 205, -2 }, /* (136) having_opt ::= HAVING expr */ + { 207, 0 }, /* (137) limit_opt ::= */ + { 207, -2 }, /* (138) limit_opt ::= LIMIT expr */ + { 207, -4 }, /* (139) limit_opt ::= LIMIT expr OFFSET expr */ + { 207, -4 }, /* (140) limit_opt ::= LIMIT expr COMMA expr */ + { 150, -6 }, /* (141) cmd ::= with DELETE FROM xfullname indexed_opt where_opt */ + { 203, 0 }, /* (142) where_opt ::= */ + { 203, -2 }, /* (143) where_opt ::= WHERE expr */ + { 150, -8 }, /* (144) cmd ::= with UPDATE orconf xfullname indexed_opt SET setlist where_opt */ + { 222, -5 }, /* (145) setlist ::= setlist COMMA nm EQ expr */ + { 222, -7 }, /* (146) setlist ::= setlist COMMA LP idlist RP EQ expr */ + { 222, -3 }, /* (147) setlist ::= nm EQ expr */ + { 222, -5 }, /* (148) setlist ::= LP idlist RP EQ expr */ + { 150, -7 }, /* (149) cmd ::= with insert_cmd INTO xfullname idlist_opt select upsert */ + { 150, -7 }, /* (150) cmd ::= with insert_cmd INTO xfullname idlist_opt DEFAULT VALUES */ + { 225, 0 }, /* (151) upsert ::= */ + { 225, -11 }, /* (152) upsert ::= ON CONFLICT LP sortlist RP where_opt DO UPDATE SET setlist where_opt */ + { 225, -8 }, /* (153) upsert ::= ON CONFLICT LP sortlist RP where_opt DO NOTHING */ + { 225, -4 }, /* (154) upsert ::= ON CONFLICT DO NOTHING */ + { 223, -2 }, /* (155) insert_cmd ::= INSERT orconf */ + { 223, -1 }, /* (156) insert_cmd ::= REPLACE */ + { 224, 0 }, /* (157) idlist_opt ::= */ + { 224, -3 }, /* (158) idlist_opt ::= LP idlist RP */ + { 220, -3 }, /* (159) idlist ::= idlist COMMA nm */ + { 220, -1 }, /* (160) idlist ::= nm */ + { 175, -3 }, /* (161) expr ::= LP expr RP */ + { 175, -1 }, /* (162) expr ::= ID|INDEXED */ + { 175, -1 }, /* (163) expr ::= JOIN_KW */ + { 175, -3 }, /* (164) expr ::= nm DOT nm */ + { 175, -5 }, /* (165) expr ::= nm DOT nm DOT nm */ + { 174, -1 }, /* (166) term ::= NULL|FLOAT|BLOB */ + { 174, -1 }, /* (167) term ::= STRING */ + { 174, -1 }, /* (168) term ::= INTEGER */ + { 175, -1 }, /* (169) expr ::= VARIABLE */ + { 175, -3 }, /* (170) expr ::= expr COLLATE ID|STRING */ + { 175, -6 }, /* (171) expr ::= CAST LP expr AS typetoken RP */ + { 175, -5 }, /* (172) expr ::= ID|INDEXED LP distinct exprlist RP */ + { 175, -4 }, /* (173) expr ::= ID|INDEXED LP STAR RP */ + { 174, -1 }, /* (174) term ::= CTIME_KW */ + { 175, -5 }, /* (175) expr ::= LP nexprlist COMMA expr RP */ + { 175, -3 }, /* (176) expr ::= expr AND expr */ + { 175, -3 }, /* (177) expr ::= expr OR expr */ + { 175, -3 }, /* (178) expr ::= expr LT|GT|GE|LE expr */ + { 175, -3 }, /* (179) expr ::= expr EQ|NE expr */ + { 175, -3 }, /* (180) expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ + { 175, -3 }, /* (181) expr ::= expr PLUS|MINUS expr */ + { 175, -3 }, /* (182) expr ::= expr STAR|SLASH|REM expr */ + { 175, -3 }, /* (183) expr ::= expr CONCAT expr */ + { 226, -2 }, /* (184) likeop ::= NOT LIKE_KW|MATCH */ + { 175, -3 }, /* (185) expr ::= expr likeop expr */ + { 175, -5 }, /* (186) expr ::= expr likeop expr ESCAPE expr */ + { 175, -2 }, /* (187) expr ::= expr ISNULL|NOTNULL */ + { 175, -3 }, /* (188) expr ::= expr NOT NULL */ + { 175, -3 }, /* (189) expr ::= expr IS expr */ + { 175, -4 }, /* (190) expr ::= expr IS NOT expr */ + { 175, -2 }, /* (191) expr ::= NOT expr */ + { 175, -2 }, /* (192) expr ::= BITNOT expr */ + { 175, -2 }, /* (193) expr ::= MINUS expr */ + { 175, -2 }, /* (194) expr ::= PLUS expr */ + { 227, -1 }, /* (195) between_op ::= BETWEEN */ + { 227, -2 }, /* (196) between_op ::= NOT BETWEEN */ + { 175, -5 }, /* (197) expr ::= expr between_op expr AND expr */ + { 228, -1 }, /* (198) in_op ::= IN */ + { 228, -2 }, /* (199) in_op ::= NOT IN */ + { 175, -5 }, /* (200) expr ::= expr in_op LP exprlist RP */ + { 175, -3 }, /* (201) expr ::= LP select RP */ + { 175, -5 }, /* (202) expr ::= expr in_op LP select RP */ + { 175, -5 }, /* (203) expr ::= expr in_op nm dbnm paren_exprlist */ + { 175, -4 }, /* (204) expr ::= EXISTS LP select RP */ + { 175, -5 }, /* (205) expr ::= CASE case_operand case_exprlist case_else END */ + { 231, -5 }, /* (206) case_exprlist ::= case_exprlist WHEN expr THEN expr */ + { 231, -4 }, /* (207) case_exprlist ::= WHEN expr THEN expr */ + { 232, -2 }, /* (208) case_else ::= ELSE expr */ + { 232, 0 }, /* (209) case_else ::= */ + { 230, -1 }, /* (210) case_operand ::= expr */ + { 230, 0 }, /* (211) case_operand ::= */ + { 210, 0 }, /* (212) exprlist ::= */ + { 209, -3 }, /* (213) nexprlist ::= nexprlist COMMA expr */ + { 209, -1 }, /* (214) nexprlist ::= expr */ + { 229, 0 }, /* (215) paren_exprlist ::= */ + { 229, -3 }, /* (216) paren_exprlist ::= LP exprlist RP */ + { 150, -12 }, /* (217) cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */ + { 233, -1 }, /* (218) uniqueflag ::= UNIQUE */ + { 233, 0 }, /* (219) uniqueflag ::= */ + { 179, 0 }, /* (220) eidlist_opt ::= */ + { 179, -3 }, /* (221) eidlist_opt ::= LP eidlist RP */ + { 189, -5 }, /* (222) eidlist ::= eidlist COMMA nm collate sortorder */ + { 189, -3 }, /* (223) eidlist ::= nm collate sortorder */ + { 234, 0 }, /* (224) collate ::= */ + { 234, -2 }, /* (225) collate ::= COLLATE ID|STRING */ + { 150, -4 }, /* (226) cmd ::= DROP INDEX ifexists fullname */ + { 150, -1 }, /* (227) cmd ::= VACUUM */ + { 150, -2 }, /* (228) cmd ::= VACUUM nm */ + { 150, -3 }, /* (229) cmd ::= PRAGMA nm dbnm */ + { 150, -5 }, /* (230) cmd ::= PRAGMA nm dbnm EQ nmnum */ + { 150, -6 }, /* (231) cmd ::= PRAGMA nm dbnm LP nmnum RP */ + { 150, -5 }, /* (232) cmd ::= PRAGMA nm dbnm EQ minus_num */ + { 150, -6 }, /* (233) cmd ::= PRAGMA nm dbnm LP minus_num RP */ + { 170, -2 }, /* (234) plus_num ::= PLUS INTEGER|FLOAT */ + { 171, -2 }, /* (235) minus_num ::= MINUS INTEGER|FLOAT */ + { 150, -5 }, /* (236) cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ + { 236, -11 }, /* (237) trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ + { 238, -1 }, /* (238) trigger_time ::= BEFORE|AFTER */ + { 238, -2 }, /* (239) trigger_time ::= INSTEAD OF */ + { 238, 0 }, /* (240) trigger_time ::= */ + { 239, -1 }, /* (241) trigger_event ::= DELETE|INSERT */ + { 239, -1 }, /* (242) trigger_event ::= UPDATE */ + { 239, -3 }, /* (243) trigger_event ::= UPDATE OF idlist */ + { 241, 0 }, /* (244) when_clause ::= */ + { 241, -2 }, /* (245) when_clause ::= WHEN expr */ + { 237, -3 }, /* (246) trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ + { 237, -2 }, /* (247) trigger_cmd_list ::= trigger_cmd SEMI */ + { 243, -3 }, /* (248) trnm ::= nm DOT nm */ + { 244, -3 }, /* (249) tridxby ::= INDEXED BY nm */ + { 244, -2 }, /* (250) tridxby ::= NOT INDEXED */ + { 242, -8 }, /* (251) trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt */ + { 242, -8 }, /* (252) trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select upsert scanpt */ + { 242, -6 }, /* (253) trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt */ + { 242, -3 }, /* (254) trigger_cmd ::= scanpt select scanpt */ + { 175, -4 }, /* (255) expr ::= RAISE LP IGNORE RP */ + { 175, -6 }, /* (256) expr ::= RAISE LP raisetype COMMA nm RP */ + { 193, -1 }, /* (257) raisetype ::= ROLLBACK */ + { 193, -1 }, /* (258) raisetype ::= ABORT */ + { 193, -1 }, /* (259) raisetype ::= FAIL */ + { 150, -4 }, /* (260) cmd ::= DROP TRIGGER ifexists fullname */ + { 150, -6 }, /* (261) cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ + { 150, -3 }, /* (262) cmd ::= DETACH database_kw_opt expr */ + { 246, 0 }, /* (263) key_opt ::= */ + { 246, -2 }, /* (264) key_opt ::= KEY expr */ + { 150, -1 }, /* (265) cmd ::= REINDEX */ + { 150, -3 }, /* (266) cmd ::= REINDEX nm dbnm */ + { 150, -1 }, /* (267) cmd ::= ANALYZE */ + { 150, -3 }, /* (268) cmd ::= ANALYZE nm dbnm */ + { 150, -6 }, /* (269) cmd ::= ALTER TABLE fullname RENAME TO nm */ + { 150, -7 }, /* (270) cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */ + { 247, -1 }, /* (271) add_column_fullname ::= fullname */ + { 150, -1 }, /* (272) cmd ::= create_vtab */ + { 150, -4 }, /* (273) cmd ::= create_vtab LP vtabarglist RP */ + { 249, -8 }, /* (274) create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */ + { 251, 0 }, /* (275) vtabarg ::= */ + { 252, -1 }, /* (276) vtabargtoken ::= ANY */ + { 252, -3 }, /* (277) vtabargtoken ::= lp anylist RP */ + { 253, -1 }, /* (278) lp ::= LP */ + { 221, -2 }, /* (279) with ::= WITH wqlist */ + { 221, -3 }, /* (280) with ::= WITH RECURSIVE wqlist */ + { 198, -6 }, /* (281) wqlist ::= nm eidlist_opt AS LP select RP */ + { 198, -8 }, /* (282) wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */ + { 145, -1 }, /* (283) input ::= cmdlist */ + { 146, -2 }, /* (284) cmdlist ::= cmdlist ecmd */ + { 146, -1 }, /* (285) cmdlist ::= ecmd */ + { 147, -1 }, /* (286) ecmd ::= SEMI */ + { 147, -2 }, /* (287) ecmd ::= cmdx SEMI */ + { 147, -2 }, /* (288) ecmd ::= explain cmdx */ + { 152, 0 }, /* (289) trans_opt ::= */ + { 152, -1 }, /* (290) trans_opt ::= TRANSACTION */ + { 152, -2 }, /* (291) trans_opt ::= TRANSACTION nm */ + { 154, -1 }, /* (292) savepoint_opt ::= SAVEPOINT */ + { 154, 0 }, /* (293) savepoint_opt ::= */ + { 150, -2 }, /* (294) cmd ::= create_table create_table_args */ + { 161, -4 }, /* (295) columnlist ::= columnlist COMMA columnname carglist */ + { 161, -2 }, /* (296) columnlist ::= columnname carglist */ + { 153, -1 }, /* (297) nm ::= ID|INDEXED */ + { 153, -1 }, /* (298) nm ::= STRING */ + { 153, -1 }, /* (299) nm ::= JOIN_KW */ + { 167, -1 }, /* (300) typetoken ::= typename */ + { 168, -1 }, /* (301) typename ::= ID|STRING */ + { 169, -1 }, /* (302) signed ::= plus_num */ + { 169, -1 }, /* (303) signed ::= minus_num */ + { 166, -2 }, /* (304) carglist ::= carglist ccons */ + { 166, 0 }, /* (305) carglist ::= */ + { 173, -2 }, /* (306) ccons ::= NULL onconf */ + { 162, -2 }, /* (307) conslist_opt ::= COMMA conslist */ + { 185, -3 }, /* (308) conslist ::= conslist tconscomma tcons */ + { 185, -1 }, /* (309) conslist ::= tcons */ + { 186, 0 }, /* (310) tconscomma ::= */ + { 190, -1 }, /* (311) defer_subclause_opt ::= defer_subclause */ + { 192, -1 }, /* (312) resolvetype ::= raisetype */ + { 196, -1 }, /* (313) selectnowith ::= oneselect */ + { 197, -1 }, /* (314) oneselect ::= values */ + { 211, -2 }, /* (315) sclp ::= selcollist COMMA */ + { 212, -1 }, /* (316) as ::= ID|STRING */ + { 175, -1 }, /* (317) expr ::= term */ + { 226, -1 }, /* (318) likeop ::= LIKE_KW|MATCH */ + { 210, -1 }, /* (319) exprlist ::= nexprlist */ + { 235, -1 }, /* (320) nmnum ::= plus_num */ + { 235, -1 }, /* (321) nmnum ::= nm */ + { 235, -1 }, /* (322) nmnum ::= ON */ + { 235, -1 }, /* (323) nmnum ::= DELETE */ + { 235, -1 }, /* (324) nmnum ::= DEFAULT */ + { 170, -1 }, /* (325) plus_num ::= INTEGER|FLOAT */ + { 240, 0 }, /* (326) foreach_clause ::= */ + { 240, -3 }, /* (327) foreach_clause ::= FOR EACH ROW */ + { 243, -1 }, /* (328) trnm ::= nm */ + { 244, 0 }, /* (329) tridxby ::= */ + { 245, -1 }, /* (330) database_kw_opt ::= DATABASE */ + { 245, 0 }, /* (331) database_kw_opt ::= */ + { 248, 0 }, /* (332) kwcolumn_opt ::= */ + { 248, -1 }, /* (333) kwcolumn_opt ::= COLUMNKW */ + { 250, -1 }, /* (334) vtabarglist ::= vtabarg */ + { 250, -3 }, /* (335) vtabarglist ::= vtabarglist COMMA vtabarg */ + { 251, -2 }, /* (336) vtabarg ::= vtabarg vtabargtoken */ + { 254, 0 }, /* (337) anylist ::= */ + { 254, -4 }, /* (338) anylist ::= anylist LP anylist RP */ + { 254, -2 }, /* (339) anylist ::= anylist ANY */ + { 221, 0 }, /* (340) with ::= */ }; static void yy_accept(yyParser*); /* Forward Declaration */ @@ -136543,22 +143848,39 @@ static void yy_accept(yyParser*); /* Forward Declaration */ /* ** Perform a reduce action and the shift that must immediately ** follow the reduce. +** +** The yyLookahead and yyLookaheadToken parameters provide reduce actions +** access to the lookahead token (if any). The yyLookahead will be YYNOCODE +** if the lookahead token has already been consumed. As this procedure is +** only called from one place, optimizing compilers will in-line it, which +** means that the extra parameters have no performance impact. */ -static void yy_reduce( +static YYACTIONTYPE yy_reduce( yyParser *yypParser, /* The parser */ - unsigned int yyruleno /* Number of the rule by which to reduce */ + unsigned int yyruleno, /* Number of the rule by which to reduce */ + int yyLookahead, /* Lookahead token, or YYNOCODE if none */ + sqlite3ParserTOKENTYPE yyLookaheadToken /* Value of the lookahead token */ + sqlite3ParserCTX_PDECL /* %extra_context */ ){ int yygoto; /* The next state */ int yyact; /* The next action */ yyStackEntry *yymsp; /* The top of the parser's stack */ int yysize; /* Amount to pop the stack */ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + (void)yyLookahead; + (void)yyLookaheadToken; yymsp = yypParser->yytos; #ifndef NDEBUG if( yyTraceFILE && yyruleno<(int)(sizeof(yyRuleName)/sizeof(yyRuleName[0])) ){ yysize = yyRuleInfo[yyruleno].nrhs; - fprintf(yyTraceFILE, "%sReduce [%s], go to state %d.\n", yyTracePrompt, - yyRuleName[yyruleno], yymsp[-yysize].stateno); + if( yysize ){ + fprintf(yyTraceFILE, "%sReduce %d [%s], go to state %d.\n", + yyTracePrompt, + yyruleno, yyRuleName[yyruleno], yymsp[yysize].stateno); + }else{ + fprintf(yyTraceFILE, "%sReduce %d [%s].\n", + yyTracePrompt, yyruleno, yyRuleName[yyruleno]); + } } #endif /* NDEBUG */ @@ -136573,15 +143895,21 @@ static void yy_reduce( } #endif #if YYSTACKDEPTH>0 - if( yypParser->yytos>=&yypParser->yystack[YYSTACKDEPTH-1] ){ + if( yypParser->yytos>=yypParser->yystackEnd ){ yyStackOverflow(yypParser); - return; + /* The call to yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } #else if( yypParser->yytos>=&yypParser->yystack[yypParser->yystksz-1] ){ if( yyGrowStack(yypParser) ){ yyStackOverflow(yypParser); - return; + /* The call to yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } yymsp = yypParser->yytos; } @@ -136609,310 +143937,336 @@ static void yy_reduce( { sqlite3FinishCoding(pParse); } break; case 3: /* cmd ::= BEGIN transtype trans_opt */ -{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy194);} +{sqlite3BeginTransaction(pParse, yymsp[-1].minor.yy502);} break; case 4: /* transtype ::= */ -{yymsp[1].minor.yy194 = TK_DEFERRED;} +{yymsp[1].minor.yy502 = TK_DEFERRED;} break; case 5: /* transtype ::= DEFERRED */ case 6: /* transtype ::= IMMEDIATE */ yytestcase(yyruleno==6); case 7: /* transtype ::= EXCLUSIVE */ yytestcase(yyruleno==7); -{yymsp[0].minor.yy194 = yymsp[0].major; /*A-overwrites-X*/} +{yymsp[0].minor.yy502 = yymsp[0].major; /*A-overwrites-X*/} break; - case 8: /* cmd ::= COMMIT trans_opt */ - case 9: /* cmd ::= END trans_opt */ yytestcase(yyruleno==9); -{sqlite3CommitTransaction(pParse);} + case 8: /* cmd ::= COMMIT|END trans_opt */ + case 9: /* cmd ::= ROLLBACK trans_opt */ yytestcase(yyruleno==9); +{sqlite3EndTransaction(pParse,yymsp[-1].major);} break; - case 10: /* cmd ::= ROLLBACK trans_opt */ -{sqlite3RollbackTransaction(pParse);} - break; - case 11: /* cmd ::= SAVEPOINT nm */ + case 10: /* cmd ::= SAVEPOINT nm */ { sqlite3Savepoint(pParse, SAVEPOINT_BEGIN, &yymsp[0].minor.yy0); } break; - case 12: /* cmd ::= RELEASE savepoint_opt nm */ + case 11: /* cmd ::= RELEASE savepoint_opt nm */ { sqlite3Savepoint(pParse, SAVEPOINT_RELEASE, &yymsp[0].minor.yy0); } break; - case 13: /* cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */ + case 12: /* cmd ::= ROLLBACK trans_opt TO savepoint_opt nm */ { sqlite3Savepoint(pParse, SAVEPOINT_ROLLBACK, &yymsp[0].minor.yy0); } break; - case 14: /* create_table ::= createkw temp TABLE ifnotexists nm dbnm */ + case 13: /* create_table ::= createkw temp TABLE ifnotexists nm dbnm */ { - sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy194,0,0,yymsp[-2].minor.yy194); + sqlite3StartTable(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,yymsp[-4].minor.yy502,0,0,yymsp[-2].minor.yy502); } break; - case 15: /* createkw ::= CREATE */ + case 14: /* createkw ::= CREATE */ {disableLookaside(pParse);} break; - case 16: /* ifnotexists ::= */ - case 19: /* temp ::= */ yytestcase(yyruleno==19); - case 22: /* table_options ::= */ yytestcase(yyruleno==22); + case 15: /* ifnotexists ::= */ + case 18: /* temp ::= */ yytestcase(yyruleno==18); + case 21: /* table_options ::= */ yytestcase(yyruleno==21); case 42: /* autoinc ::= */ yytestcase(yyruleno==42); case 57: /* init_deferred_pred_opt ::= */ yytestcase(yyruleno==57); case 67: /* defer_subclause_opt ::= */ yytestcase(yyruleno==67); case 76: /* ifexists ::= */ yytestcase(yyruleno==76); - case 90: /* distinct ::= */ yytestcase(yyruleno==90); - case 215: /* collate ::= */ yytestcase(yyruleno==215); -{yymsp[1].minor.yy194 = 0;} + case 92: /* distinct ::= */ yytestcase(yyruleno==92); + case 224: /* collate ::= */ yytestcase(yyruleno==224); +{yymsp[1].minor.yy502 = 0;} break; - case 17: /* ifnotexists ::= IF NOT EXISTS */ -{yymsp[-2].minor.yy194 = 1;} + case 16: /* ifnotexists ::= IF NOT EXISTS */ +{yymsp[-2].minor.yy502 = 1;} break; - case 18: /* temp ::= TEMP */ + case 17: /* temp ::= TEMP */ case 43: /* autoinc ::= AUTOINCR */ yytestcase(yyruleno==43); -{yymsp[0].minor.yy194 = 1;} +{yymsp[0].minor.yy502 = 1;} break; - case 20: /* create_table_args ::= LP columnlist conslist_opt RP table_options */ + case 19: /* create_table_args ::= LP columnlist conslist_opt RP table_options */ { - sqlite3EndTable(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,yymsp[0].minor.yy194,0); + sqlite3EndTable(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,yymsp[0].minor.yy502,0); } break; - case 21: /* create_table_args ::= AS select */ + case 20: /* create_table_args ::= AS select */ { - sqlite3EndTable(pParse,0,0,0,yymsp[0].minor.yy243); - sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy243); + sqlite3EndTable(pParse,0,0,0,yymsp[0].minor.yy399); + sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy399); } break; - case 23: /* table_options ::= WITHOUT nm */ + case 22: /* table_options ::= WITHOUT nm */ { if( yymsp[0].minor.yy0.n==5 && sqlite3_strnicmp(yymsp[0].minor.yy0.z,"rowid",5)==0 ){ - yymsp[-1].minor.yy194 = TF_WithoutRowid | TF_NoVisibleRowid; + yymsp[-1].minor.yy502 = TF_WithoutRowid | TF_NoVisibleRowid; }else{ - yymsp[-1].minor.yy194 = 0; + yymsp[-1].minor.yy502 = 0; sqlite3ErrorMsg(pParse, "unknown table option: %.*s", yymsp[0].minor.yy0.n, yymsp[0].minor.yy0.z); } } break; - case 24: /* columnname ::= nm typetoken */ + case 23: /* columnname ::= nm typetoken */ {sqlite3AddColumn(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0);} break; - case 25: /* typetoken ::= */ + case 24: /* typetoken ::= */ case 60: /* conslist_opt ::= */ yytestcase(yyruleno==60); - case 96: /* as ::= */ yytestcase(yyruleno==96); + case 98: /* as ::= */ yytestcase(yyruleno==98); {yymsp[1].minor.yy0.n = 0; yymsp[1].minor.yy0.z = 0;} break; - case 26: /* typetoken ::= typename LP signed RP */ + case 25: /* typetoken ::= typename LP signed RP */ { yymsp[-3].minor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-3].minor.yy0.z); } break; - case 27: /* typetoken ::= typename LP signed COMMA signed RP */ + case 26: /* typetoken ::= typename LP signed COMMA signed RP */ { yymsp[-5].minor.yy0.n = (int)(&yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n] - yymsp[-5].minor.yy0.z); } break; - case 28: /* typename ::= typename ID|STRING */ + case 27: /* typename ::= typename ID|STRING */ {yymsp[-1].minor.yy0.n=yymsp[0].minor.yy0.n+(int)(yymsp[0].minor.yy0.z-yymsp[-1].minor.yy0.z);} break; + case 28: /* scanpt ::= */ +{ + assert( yyLookahead!=YYNOCODE ); + yymsp[1].minor.yy36 = yyLookaheadToken.z; +} + break; case 29: /* ccons ::= CONSTRAINT nm */ case 62: /* tcons ::= CONSTRAINT nm */ yytestcase(yyruleno==62); {pParse->constraintName = yymsp[0].minor.yy0;} break; - case 30: /* ccons ::= DEFAULT term */ - case 32: /* ccons ::= DEFAULT PLUS term */ yytestcase(yyruleno==32); -{sqlite3AddDefaultValue(pParse,&yymsp[0].minor.yy190);} + case 30: /* ccons ::= DEFAULT scanpt term scanpt */ +{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy182,yymsp[-2].minor.yy36,yymsp[0].minor.yy36);} break; case 31: /* ccons ::= DEFAULT LP expr RP */ -{sqlite3AddDefaultValue(pParse,&yymsp[-1].minor.yy190);} +{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy182,yymsp[-2].minor.yy0.z+1,yymsp[0].minor.yy0.z);} break; - case 33: /* ccons ::= DEFAULT MINUS term */ + case 32: /* ccons ::= DEFAULT PLUS term scanpt */ +{sqlite3AddDefaultValue(pParse,yymsp[-1].minor.yy182,yymsp[-2].minor.yy0.z,yymsp[0].minor.yy36);} + break; + case 33: /* ccons ::= DEFAULT MINUS term scanpt */ { - ExprSpan v; - v.pExpr = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy190.pExpr, 0); - v.zStart = yymsp[-1].minor.yy0.z; - v.zEnd = yymsp[0].minor.yy190.zEnd; - sqlite3AddDefaultValue(pParse,&v); + Expr *p = sqlite3PExpr(pParse, TK_UMINUS, yymsp[-1].minor.yy182, 0); + sqlite3AddDefaultValue(pParse,p,yymsp[-2].minor.yy0.z,yymsp[0].minor.yy36); } break; - case 34: /* ccons ::= DEFAULT ID|INDEXED */ + case 34: /* ccons ::= DEFAULT scanpt ID|INDEXED */ { - ExprSpan v; - spanExpr(&v, pParse, TK_STRING, yymsp[0].minor.yy0); - sqlite3AddDefaultValue(pParse,&v); + Expr *p = tokenExpr(pParse, TK_STRING, yymsp[0].minor.yy0); + if( p ){ + sqlite3ExprIdToTrueFalse(p); + testcase( p->op==TK_TRUEFALSE && sqlite3ExprTruthValue(p) ); + } + sqlite3AddDefaultValue(pParse,p,yymsp[0].minor.yy0.z,yymsp[0].minor.yy0.z+yymsp[0].minor.yy0.n); } break; case 35: /* ccons ::= NOT NULL onconf */ -{sqlite3AddNotNull(pParse, yymsp[0].minor.yy194);} +{sqlite3AddNotNull(pParse, yymsp[0].minor.yy502);} break; case 36: /* ccons ::= PRIMARY KEY sortorder onconf autoinc */ -{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy194,yymsp[0].minor.yy194,yymsp[-2].minor.yy194);} +{sqlite3AddPrimaryKey(pParse,0,yymsp[-1].minor.yy502,yymsp[0].minor.yy502,yymsp[-2].minor.yy502);} break; case 37: /* ccons ::= UNIQUE onconf */ -{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy194,0,0,0,0, +{sqlite3CreateIndex(pParse,0,0,0,0,yymsp[0].minor.yy502,0,0,0,0, SQLITE_IDXTYPE_UNIQUE);} break; case 38: /* ccons ::= CHECK LP expr RP */ -{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy190.pExpr);} +{sqlite3AddCheckConstraint(pParse,yymsp[-1].minor.yy182);} break; case 39: /* ccons ::= REFERENCES nm eidlist_opt refargs */ -{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy148,yymsp[0].minor.yy194);} +{sqlite3CreateForeignKey(pParse,0,&yymsp[-2].minor.yy0,yymsp[-1].minor.yy232,yymsp[0].minor.yy502);} break; case 40: /* ccons ::= defer_subclause */ -{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy194);} +{sqlite3DeferForeignKey(pParse,yymsp[0].minor.yy502);} break; case 41: /* ccons ::= COLLATE ID|STRING */ {sqlite3AddCollateType(pParse, &yymsp[0].minor.yy0);} break; case 44: /* refargs ::= */ -{ yymsp[1].minor.yy194 = OE_None*0x0101; /* EV: R-19803-45884 */} +{ yymsp[1].minor.yy502 = OE_None*0x0101; /* EV: R-19803-45884 */} break; case 45: /* refargs ::= refargs refarg */ -{ yymsp[-1].minor.yy194 = (yymsp[-1].minor.yy194 & ~yymsp[0].minor.yy497.mask) | yymsp[0].minor.yy497.value; } +{ yymsp[-1].minor.yy502 = (yymsp[-1].minor.yy502 & ~yymsp[0].minor.yy107.mask) | yymsp[0].minor.yy107.value; } break; case 46: /* refarg ::= MATCH nm */ -{ yymsp[-1].minor.yy497.value = 0; yymsp[-1].minor.yy497.mask = 0x000000; } +{ yymsp[-1].minor.yy107.value = 0; yymsp[-1].minor.yy107.mask = 0x000000; } break; case 47: /* refarg ::= ON INSERT refact */ -{ yymsp[-2].minor.yy497.value = 0; yymsp[-2].minor.yy497.mask = 0x000000; } +{ yymsp[-2].minor.yy107.value = 0; yymsp[-2].minor.yy107.mask = 0x000000; } break; case 48: /* refarg ::= ON DELETE refact */ -{ yymsp[-2].minor.yy497.value = yymsp[0].minor.yy194; yymsp[-2].minor.yy497.mask = 0x0000ff; } +{ yymsp[-2].minor.yy107.value = yymsp[0].minor.yy502; yymsp[-2].minor.yy107.mask = 0x0000ff; } break; case 49: /* refarg ::= ON UPDATE refact */ -{ yymsp[-2].minor.yy497.value = yymsp[0].minor.yy194<<8; yymsp[-2].minor.yy497.mask = 0x00ff00; } +{ yymsp[-2].minor.yy107.value = yymsp[0].minor.yy502<<8; yymsp[-2].minor.yy107.mask = 0x00ff00; } break; case 50: /* refact ::= SET NULL */ -{ yymsp[-1].minor.yy194 = OE_SetNull; /* EV: R-33326-45252 */} +{ yymsp[-1].minor.yy502 = OE_SetNull; /* EV: R-33326-45252 */} break; case 51: /* refact ::= SET DEFAULT */ -{ yymsp[-1].minor.yy194 = OE_SetDflt; /* EV: R-33326-45252 */} +{ yymsp[-1].minor.yy502 = OE_SetDflt; /* EV: R-33326-45252 */} break; case 52: /* refact ::= CASCADE */ -{ yymsp[0].minor.yy194 = OE_Cascade; /* EV: R-33326-45252 */} +{ yymsp[0].minor.yy502 = OE_Cascade; /* EV: R-33326-45252 */} break; case 53: /* refact ::= RESTRICT */ -{ yymsp[0].minor.yy194 = OE_Restrict; /* EV: R-33326-45252 */} +{ yymsp[0].minor.yy502 = OE_Restrict; /* EV: R-33326-45252 */} break; case 54: /* refact ::= NO ACTION */ -{ yymsp[-1].minor.yy194 = OE_None; /* EV: R-33326-45252 */} +{ yymsp[-1].minor.yy502 = OE_None; /* EV: R-33326-45252 */} break; case 55: /* defer_subclause ::= NOT DEFERRABLE init_deferred_pred_opt */ -{yymsp[-2].minor.yy194 = 0;} +{yymsp[-2].minor.yy502 = 0;} break; case 56: /* defer_subclause ::= DEFERRABLE init_deferred_pred_opt */ case 71: /* orconf ::= OR resolvetype */ yytestcase(yyruleno==71); - case 144: /* insert_cmd ::= INSERT orconf */ yytestcase(yyruleno==144); -{yymsp[-1].minor.yy194 = yymsp[0].minor.yy194;} + case 155: /* insert_cmd ::= INSERT orconf */ yytestcase(yyruleno==155); +{yymsp[-1].minor.yy502 = yymsp[0].minor.yy502;} break; case 58: /* init_deferred_pred_opt ::= INITIALLY DEFERRED */ case 75: /* ifexists ::= IF EXISTS */ yytestcase(yyruleno==75); - case 187: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==187); - case 190: /* in_op ::= NOT IN */ yytestcase(yyruleno==190); - case 216: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==216); -{yymsp[-1].minor.yy194 = 1;} + case 196: /* between_op ::= NOT BETWEEN */ yytestcase(yyruleno==196); + case 199: /* in_op ::= NOT IN */ yytestcase(yyruleno==199); + case 225: /* collate ::= COLLATE ID|STRING */ yytestcase(yyruleno==225); +{yymsp[-1].minor.yy502 = 1;} break; case 59: /* init_deferred_pred_opt ::= INITIALLY IMMEDIATE */ -{yymsp[-1].minor.yy194 = 0;} +{yymsp[-1].minor.yy502 = 0;} break; case 61: /* tconscomma ::= COMMA */ {pParse->constraintName.n = 0;} break; case 63: /* tcons ::= PRIMARY KEY LP sortlist autoinc RP onconf */ -{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy148,yymsp[0].minor.yy194,yymsp[-2].minor.yy194,0);} +{sqlite3AddPrimaryKey(pParse,yymsp[-3].minor.yy232,yymsp[0].minor.yy502,yymsp[-2].minor.yy502,0);} break; case 64: /* tcons ::= UNIQUE LP sortlist RP onconf */ -{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy148,yymsp[0].minor.yy194,0,0,0,0, +{sqlite3CreateIndex(pParse,0,0,0,yymsp[-2].minor.yy232,yymsp[0].minor.yy502,0,0,0,0, SQLITE_IDXTYPE_UNIQUE);} break; case 65: /* tcons ::= CHECK LP expr RP onconf */ -{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy190.pExpr);} +{sqlite3AddCheckConstraint(pParse,yymsp[-2].minor.yy182);} break; case 66: /* tcons ::= FOREIGN KEY LP eidlist RP REFERENCES nm eidlist_opt refargs defer_subclause_opt */ { - sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy148, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy148, yymsp[-1].minor.yy194); - sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy194); + sqlite3CreateForeignKey(pParse, yymsp[-6].minor.yy232, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy232, yymsp[-1].minor.yy502); + sqlite3DeferForeignKey(pParse, yymsp[0].minor.yy502); } break; case 68: /* onconf ::= */ case 70: /* orconf ::= */ yytestcase(yyruleno==70); -{yymsp[1].minor.yy194 = OE_Default;} +{yymsp[1].minor.yy502 = OE_Default;} break; case 69: /* onconf ::= ON CONFLICT resolvetype */ -{yymsp[-2].minor.yy194 = yymsp[0].minor.yy194;} +{yymsp[-2].minor.yy502 = yymsp[0].minor.yy502;} break; case 72: /* resolvetype ::= IGNORE */ -{yymsp[0].minor.yy194 = OE_Ignore;} +{yymsp[0].minor.yy502 = OE_Ignore;} break; case 73: /* resolvetype ::= REPLACE */ - case 145: /* insert_cmd ::= REPLACE */ yytestcase(yyruleno==145); -{yymsp[0].minor.yy194 = OE_Replace;} + case 156: /* insert_cmd ::= REPLACE */ yytestcase(yyruleno==156); +{yymsp[0].minor.yy502 = OE_Replace;} break; case 74: /* cmd ::= DROP TABLE ifexists fullname */ { - sqlite3DropTable(pParse, yymsp[0].minor.yy185, 0, yymsp[-1].minor.yy194); + sqlite3DropTable(pParse, yymsp[0].minor.yy427, 0, yymsp[-1].minor.yy502); } break; case 77: /* cmd ::= createkw temp VIEW ifnotexists nm dbnm eidlist_opt AS select */ { - sqlite3CreateView(pParse, &yymsp[-8].minor.yy0, &yymsp[-4].minor.yy0, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy148, yymsp[0].minor.yy243, yymsp[-7].minor.yy194, yymsp[-5].minor.yy194); + sqlite3CreateView(pParse, &yymsp[-8].minor.yy0, &yymsp[-4].minor.yy0, &yymsp[-3].minor.yy0, yymsp[-2].minor.yy232, yymsp[0].minor.yy399, yymsp[-7].minor.yy502, yymsp[-5].minor.yy502); } break; case 78: /* cmd ::= DROP VIEW ifexists fullname */ { - sqlite3DropTable(pParse, yymsp[0].minor.yy185, 1, yymsp[-1].minor.yy194); + sqlite3DropTable(pParse, yymsp[0].minor.yy427, 1, yymsp[-1].minor.yy502); } break; case 79: /* cmd ::= select */ { SelectDest dest = {SRT_Output, 0, 0, 0, 0, 0}; - sqlite3Select(pParse, yymsp[0].minor.yy243, &dest); - sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy243); + sqlite3Select(pParse, yymsp[0].minor.yy399, &dest); + sqlite3SelectDelete(pParse->db, yymsp[0].minor.yy399); } break; - case 80: /* select ::= with selectnowith */ + case 80: /* select ::= WITH wqlist selectnowith */ { - Select *p = yymsp[0].minor.yy243; + Select *p = yymsp[0].minor.yy399; if( p ){ - p->pWith = yymsp[-1].minor.yy285; + p->pWith = yymsp[-1].minor.yy91; parserDoubleLinkSelect(pParse, p); }else{ - sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy285); + sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy91); } - yymsp[-1].minor.yy243 = p; /*A-overwrites-W*/ + yymsp[-2].minor.yy399 = p; } break; - case 81: /* selectnowith ::= selectnowith multiselect_op oneselect */ + case 81: /* select ::= WITH RECURSIVE wqlist selectnowith */ { - Select *pRhs = yymsp[0].minor.yy243; - Select *pLhs = yymsp[-2].minor.yy243; + Select *p = yymsp[0].minor.yy399; + if( p ){ + p->pWith = yymsp[-1].minor.yy91; + parserDoubleLinkSelect(pParse, p); + }else{ + sqlite3WithDelete(pParse->db, yymsp[-1].minor.yy91); + } + yymsp[-3].minor.yy399 = p; +} + break; + case 82: /* select ::= selectnowith */ +{ + Select *p = yymsp[0].minor.yy399; + if( p ){ + parserDoubleLinkSelect(pParse, p); + } + yymsp[0].minor.yy399 = p; /*A-overwrites-X*/ +} + break; + case 83: /* selectnowith ::= selectnowith multiselect_op oneselect */ +{ + Select *pRhs = yymsp[0].minor.yy399; + Select *pLhs = yymsp[-2].minor.yy399; if( pRhs && pRhs->pPrior ){ SrcList *pFrom; Token x; x.n = 0; parserDoubleLinkSelect(pParse, pRhs); pFrom = sqlite3SrcListAppendFromTerm(pParse,0,0,0,&x,pRhs,0,0); - pRhs = sqlite3SelectNew(pParse,0,pFrom,0,0,0,0,0,0,0); + pRhs = sqlite3SelectNew(pParse,0,pFrom,0,0,0,0,0,0); } if( pRhs ){ - pRhs->op = (u8)yymsp[-1].minor.yy194; + pRhs->op = (u8)yymsp[-1].minor.yy502; pRhs->pPrior = pLhs; if( ALWAYS(pLhs) ) pLhs->selFlags &= ~SF_MultiValue; pRhs->selFlags &= ~SF_MultiValue; - if( yymsp[-1].minor.yy194!=TK_ALL ) pParse->hasCompound = 1; + if( yymsp[-1].minor.yy502!=TK_ALL ) pParse->hasCompound = 1; }else{ sqlite3SelectDelete(pParse->db, pLhs); } - yymsp[-2].minor.yy243 = pRhs; + yymsp[-2].minor.yy399 = pRhs; } break; - case 82: /* multiselect_op ::= UNION */ - case 84: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==84); -{yymsp[0].minor.yy194 = yymsp[0].major; /*A-overwrites-OP*/} + case 84: /* multiselect_op ::= UNION */ + case 86: /* multiselect_op ::= EXCEPT|INTERSECT */ yytestcase(yyruleno==86); +{yymsp[0].minor.yy502 = yymsp[0].major; /*A-overwrites-OP*/} break; - case 83: /* multiselect_op ::= UNION ALL */ -{yymsp[-1].minor.yy194 = TK_ALL;} + case 85: /* multiselect_op ::= UNION ALL */ +{yymsp[-1].minor.yy502 = TK_ALL;} break; - case 85: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ + case 87: /* oneselect ::= SELECT distinct selcollist from where_opt groupby_opt having_opt orderby_opt limit_opt */ { #if SELECTTRACE_ENABLED Token s = yymsp[-8].minor.yy0; /*A-overwrites-S*/ #endif - yymsp[-8].minor.yy243 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy148,yymsp[-5].minor.yy185,yymsp[-4].minor.yy72,yymsp[-3].minor.yy148,yymsp[-2].minor.yy72,yymsp[-1].minor.yy148,yymsp[-7].minor.yy194,yymsp[0].minor.yy354.pLimit,yymsp[0].minor.yy354.pOffset); + yymsp[-8].minor.yy399 = sqlite3SelectNew(pParse,yymsp[-6].minor.yy232,yymsp[-5].minor.yy427,yymsp[-4].minor.yy182,yymsp[-3].minor.yy232,yymsp[-2].minor.yy182,yymsp[-1].minor.yy232,yymsp[-7].minor.yy502,yymsp[0].minor.yy182); #if SELECTTRACE_ENABLED /* Populate the Select.zSelName[] string that is used to help with ** query planner debugging, to differentiate between multiple Select @@ -136923,488 +144277,492 @@ static void yy_reduce( ** comment to be the zSelName value. Otherwise, the label is #N where ** is an integer that is incremented with each SELECT statement seen. */ - if( yymsp[-8].minor.yy243!=0 ){ + if( yymsp[-8].minor.yy399!=0 ){ const char *z = s.z+6; int i; - sqlite3_snprintf(sizeof(yymsp[-8].minor.yy243->zSelName), yymsp[-8].minor.yy243->zSelName, "#%d", - ++pParse->nSelect); + sqlite3_snprintf(sizeof(yymsp[-8].minor.yy399->zSelName), yymsp[-8].minor.yy399->zSelName,"#%d",++pParse->nSelect); while( z[0]==' ' ) z++; if( z[0]=='/' && z[1]=='*' ){ z += 2; while( z[0]==' ' ) z++; for(i=0; sqlite3Isalnum(z[i]); i++){} - sqlite3_snprintf(sizeof(yymsp[-8].minor.yy243->zSelName), yymsp[-8].minor.yy243->zSelName, "%.*s", i, z); + sqlite3_snprintf(sizeof(yymsp[-8].minor.yy399->zSelName), yymsp[-8].minor.yy399->zSelName, "%.*s", i, z); } } #endif /* SELECTRACE_ENABLED */ } break; - case 86: /* values ::= VALUES LP nexprlist RP */ + case 88: /* values ::= VALUES LP nexprlist RP */ { - yymsp[-3].minor.yy243 = sqlite3SelectNew(pParse,yymsp[-1].minor.yy148,0,0,0,0,0,SF_Values,0,0); + yymsp[-3].minor.yy399 = sqlite3SelectNew(pParse,yymsp[-1].minor.yy232,0,0,0,0,0,SF_Values,0); } break; - case 87: /* values ::= values COMMA LP exprlist RP */ + case 89: /* values ::= values COMMA LP exprlist RP */ { - Select *pRight, *pLeft = yymsp[-4].minor.yy243; - pRight = sqlite3SelectNew(pParse,yymsp[-1].minor.yy148,0,0,0,0,0,SF_Values|SF_MultiValue,0,0); + Select *pRight, *pLeft = yymsp[-4].minor.yy399; + pRight = sqlite3SelectNew(pParse,yymsp[-1].minor.yy232,0,0,0,0,0,SF_Values|SF_MultiValue,0); if( ALWAYS(pLeft) ) pLeft->selFlags &= ~SF_MultiValue; if( pRight ){ pRight->op = TK_ALL; pRight->pPrior = pLeft; - yymsp[-4].minor.yy243 = pRight; + yymsp[-4].minor.yy399 = pRight; }else{ - yymsp[-4].minor.yy243 = pLeft; + yymsp[-4].minor.yy399 = pLeft; } } break; - case 88: /* distinct ::= DISTINCT */ -{yymsp[0].minor.yy194 = SF_Distinct;} + case 90: /* distinct ::= DISTINCT */ +{yymsp[0].minor.yy502 = SF_Distinct;} break; - case 89: /* distinct ::= ALL */ -{yymsp[0].minor.yy194 = SF_All;} + case 91: /* distinct ::= ALL */ +{yymsp[0].minor.yy502 = SF_All;} break; - case 91: /* sclp ::= */ - case 119: /* orderby_opt ::= */ yytestcase(yyruleno==119); - case 126: /* groupby_opt ::= */ yytestcase(yyruleno==126); - case 203: /* exprlist ::= */ yytestcase(yyruleno==203); - case 206: /* paren_exprlist ::= */ yytestcase(yyruleno==206); - case 211: /* eidlist_opt ::= */ yytestcase(yyruleno==211); -{yymsp[1].minor.yy148 = 0;} + case 93: /* sclp ::= */ + case 126: /* orderby_opt ::= */ yytestcase(yyruleno==126); + case 133: /* groupby_opt ::= */ yytestcase(yyruleno==133); + case 212: /* exprlist ::= */ yytestcase(yyruleno==212); + case 215: /* paren_exprlist ::= */ yytestcase(yyruleno==215); + case 220: /* eidlist_opt ::= */ yytestcase(yyruleno==220); +{yymsp[1].minor.yy232 = 0;} break; - case 92: /* selcollist ::= sclp expr as */ + case 94: /* selcollist ::= sclp scanpt expr scanpt as */ { - yymsp[-2].minor.yy148 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy148, yymsp[-1].minor.yy190.pExpr); - if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yymsp[-2].minor.yy148, &yymsp[0].minor.yy0, 1); - sqlite3ExprListSetSpan(pParse,yymsp[-2].minor.yy148,&yymsp[-1].minor.yy190); + yymsp[-4].minor.yy232 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy232, yymsp[-2].minor.yy182); + if( yymsp[0].minor.yy0.n>0 ) sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy232, &yymsp[0].minor.yy0, 1); + sqlite3ExprListSetSpan(pParse,yymsp[-4].minor.yy232,yymsp[-3].minor.yy36,yymsp[-1].minor.yy36); } break; - case 93: /* selcollist ::= sclp STAR */ + case 95: /* selcollist ::= sclp scanpt STAR */ { Expr *p = sqlite3Expr(pParse->db, TK_ASTERISK, 0); - yymsp[-1].minor.yy148 = sqlite3ExprListAppend(pParse, yymsp[-1].minor.yy148, p); + yymsp[-2].minor.yy232 = sqlite3ExprListAppend(pParse, yymsp[-2].minor.yy232, p); } break; - case 94: /* selcollist ::= sclp nm DOT STAR */ + case 96: /* selcollist ::= sclp scanpt nm DOT STAR */ { Expr *pRight = sqlite3PExpr(pParse, TK_ASTERISK, 0, 0); Expr *pLeft = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *pDot = sqlite3PExpr(pParse, TK_DOT, pLeft, pRight); - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148, pDot); + yymsp[-4].minor.yy232 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy232, pDot); } break; - case 95: /* as ::= AS nm */ - case 106: /* dbnm ::= DOT nm */ yytestcase(yyruleno==106); - case 225: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==225); - case 226: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==226); + case 97: /* as ::= AS nm */ + case 108: /* dbnm ::= DOT nm */ yytestcase(yyruleno==108); + case 234: /* plus_num ::= PLUS INTEGER|FLOAT */ yytestcase(yyruleno==234); + case 235: /* minus_num ::= MINUS INTEGER|FLOAT */ yytestcase(yyruleno==235); {yymsp[-1].minor.yy0 = yymsp[0].minor.yy0;} break; - case 97: /* from ::= */ -{yymsp[1].minor.yy185 = sqlite3DbMallocZero(pParse->db, sizeof(*yymsp[1].minor.yy185));} + case 99: /* from ::= */ +{yymsp[1].minor.yy427 = sqlite3DbMallocZero(pParse->db, sizeof(*yymsp[1].minor.yy427));} break; - case 98: /* from ::= FROM seltablist */ + case 100: /* from ::= FROM seltablist */ { - yymsp[-1].minor.yy185 = yymsp[0].minor.yy185; - sqlite3SrcListShiftJoinType(yymsp[-1].minor.yy185); + yymsp[-1].minor.yy427 = yymsp[0].minor.yy427; + sqlite3SrcListShiftJoinType(yymsp[-1].minor.yy427); } break; - case 99: /* stl_prefix ::= seltablist joinop */ + case 101: /* stl_prefix ::= seltablist joinop */ { - if( ALWAYS(yymsp[-1].minor.yy185 && yymsp[-1].minor.yy185->nSrc>0) ) yymsp[-1].minor.yy185->a[yymsp[-1].minor.yy185->nSrc-1].fg.jointype = (u8)yymsp[0].minor.yy194; + if( ALWAYS(yymsp[-1].minor.yy427 && yymsp[-1].minor.yy427->nSrc>0) ) yymsp[-1].minor.yy427->a[yymsp[-1].minor.yy427->nSrc-1].fg.jointype = (u8)yymsp[0].minor.yy502; } break; - case 100: /* stl_prefix ::= */ -{yymsp[1].minor.yy185 = 0;} + case 102: /* stl_prefix ::= */ +{yymsp[1].minor.yy427 = 0;} break; - case 101: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ + case 103: /* seltablist ::= stl_prefix nm dbnm as indexed_opt on_opt using_opt */ { - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); - sqlite3SrcListIndexedBy(pParse, yymsp[-6].minor.yy185, &yymsp[-2].minor.yy0); + yymsp[-6].minor.yy427 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy427,&yymsp[-5].minor.yy0,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,0,yymsp[-1].minor.yy182,yymsp[0].minor.yy510); + sqlite3SrcListIndexedBy(pParse, yymsp[-6].minor.yy427, &yymsp[-2].minor.yy0); } break; - case 102: /* seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */ + case 104: /* seltablist ::= stl_prefix nm dbnm LP exprlist RP as on_opt using_opt */ { - yymsp[-8].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-8].minor.yy185,&yymsp[-7].minor.yy0,&yymsp[-6].minor.yy0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); - sqlite3SrcListFuncArgs(pParse, yymsp[-8].minor.yy185, yymsp[-4].minor.yy148); + yymsp[-8].minor.yy427 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-8].minor.yy427,&yymsp[-7].minor.yy0,&yymsp[-6].minor.yy0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy182,yymsp[0].minor.yy510); + sqlite3SrcListFuncArgs(pParse, yymsp[-8].minor.yy427, yymsp[-4].minor.yy232); } break; - case 103: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */ + case 105: /* seltablist ::= stl_prefix LP select RP as on_opt using_opt */ { - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy243,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); + yymsp[-6].minor.yy427 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy427,0,0,&yymsp[-2].minor.yy0,yymsp[-4].minor.yy399,yymsp[-1].minor.yy182,yymsp[0].minor.yy510); } break; - case 104: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ + case 106: /* seltablist ::= stl_prefix LP seltablist RP as on_opt using_opt */ { - if( yymsp[-6].minor.yy185==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy72==0 && yymsp[0].minor.yy254==0 ){ - yymsp[-6].minor.yy185 = yymsp[-4].minor.yy185; - }else if( yymsp[-4].minor.yy185->nSrc==1 ){ - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,0,0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); - if( yymsp[-6].minor.yy185 ){ - struct SrcList_item *pNew = &yymsp[-6].minor.yy185->a[yymsp[-6].minor.yy185->nSrc-1]; - struct SrcList_item *pOld = yymsp[-4].minor.yy185->a; + if( yymsp[-6].minor.yy427==0 && yymsp[-2].minor.yy0.n==0 && yymsp[-1].minor.yy182==0 && yymsp[0].minor.yy510==0 ){ + yymsp[-6].minor.yy427 = yymsp[-4].minor.yy427; + }else if( yymsp[-4].minor.yy427->nSrc==1 ){ + yymsp[-6].minor.yy427 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy427,0,0,&yymsp[-2].minor.yy0,0,yymsp[-1].minor.yy182,yymsp[0].minor.yy510); + if( yymsp[-6].minor.yy427 ){ + struct SrcList_item *pNew = &yymsp[-6].minor.yy427->a[yymsp[-6].minor.yy427->nSrc-1]; + struct SrcList_item *pOld = yymsp[-4].minor.yy427->a; pNew->zName = pOld->zName; pNew->zDatabase = pOld->zDatabase; pNew->pSelect = pOld->pSelect; pOld->zName = pOld->zDatabase = 0; pOld->pSelect = 0; } - sqlite3SrcListDelete(pParse->db, yymsp[-4].minor.yy185); + sqlite3SrcListDelete(pParse->db, yymsp[-4].minor.yy427); }else{ Select *pSubquery; - sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy185); - pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy185,0,0,0,0,SF_NestedFrom,0,0); - yymsp[-6].minor.yy185 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy185,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy72,yymsp[0].minor.yy254); + sqlite3SrcListShiftJoinType(yymsp[-4].minor.yy427); + pSubquery = sqlite3SelectNew(pParse,0,yymsp[-4].minor.yy427,0,0,0,0,SF_NestedFrom,0); + yymsp[-6].minor.yy427 = sqlite3SrcListAppendFromTerm(pParse,yymsp[-6].minor.yy427,0,0,&yymsp[-2].minor.yy0,pSubquery,yymsp[-1].minor.yy182,yymsp[0].minor.yy510); } } break; - case 105: /* dbnm ::= */ - case 114: /* indexed_opt ::= */ yytestcase(yyruleno==114); + case 107: /* dbnm ::= */ + case 121: /* indexed_opt ::= */ yytestcase(yyruleno==121); {yymsp[1].minor.yy0.z=0; yymsp[1].minor.yy0.n=0;} break; - case 107: /* fullname ::= nm dbnm */ -{yymsp[-1].minor.yy185 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/} + case 109: /* fullname ::= nm */ + case 111: /* xfullname ::= nm */ yytestcase(yyruleno==111); +{yymsp[0].minor.yy427 = sqlite3SrcListAppend(pParse->db,0,&yymsp[0].minor.yy0,0); /*A-overwrites-X*/} break; - case 108: /* joinop ::= COMMA|JOIN */ -{ yymsp[0].minor.yy194 = JT_INNER; } + case 110: /* fullname ::= nm DOT nm */ + case 112: /* xfullname ::= nm DOT nm */ yytestcase(yyruleno==112); +{yymsp[-2].minor.yy427 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/} break; - case 109: /* joinop ::= JOIN_KW JOIN */ -{yymsp[-1].minor.yy194 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); /*X-overwrites-A*/} + case 113: /* xfullname ::= nm DOT nm AS nm */ +{ + yymsp[-4].minor.yy427 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,&yymsp[-2].minor.yy0); /*A-overwrites-X*/ + if( yymsp[-4].minor.yy427 ) yymsp[-4].minor.yy427->a[0].zAlias = sqlite3NameFromToken(pParse->db, &yymsp[0].minor.yy0); +} + break; + case 114: /* xfullname ::= nm AS nm */ +{ + yymsp[-2].minor.yy427 = sqlite3SrcListAppend(pParse->db,0,&yymsp[-2].minor.yy0,0); /*A-overwrites-X*/ + if( yymsp[-2].minor.yy427 ) yymsp[-2].minor.yy427->a[0].zAlias = sqlite3NameFromToken(pParse->db, &yymsp[0].minor.yy0); +} break; - case 110: /* joinop ::= JOIN_KW nm JOIN */ -{yymsp[-2].minor.yy194 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); /*X-overwrites-A*/} + case 115: /* joinop ::= COMMA|JOIN */ +{ yymsp[0].minor.yy502 = JT_INNER; } break; - case 111: /* joinop ::= JOIN_KW nm nm JOIN */ -{yymsp[-3].minor.yy194 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0);/*X-overwrites-A*/} + case 116: /* joinop ::= JOIN_KW JOIN */ +{yymsp[-1].minor.yy502 = sqlite3JoinType(pParse,&yymsp[-1].minor.yy0,0,0); /*X-overwrites-A*/} break; - case 112: /* on_opt ::= ON expr */ - case 129: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==129); - case 136: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==136); - case 199: /* case_else ::= ELSE expr */ yytestcase(yyruleno==199); -{yymsp[-1].minor.yy72 = yymsp[0].minor.yy190.pExpr;} + case 117: /* joinop ::= JOIN_KW nm JOIN */ +{yymsp[-2].minor.yy502 = sqlite3JoinType(pParse,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0,0); /*X-overwrites-A*/} break; - case 113: /* on_opt ::= */ - case 128: /* having_opt ::= */ yytestcase(yyruleno==128); - case 135: /* where_opt ::= */ yytestcase(yyruleno==135); - case 200: /* case_else ::= */ yytestcase(yyruleno==200); - case 202: /* case_operand ::= */ yytestcase(yyruleno==202); -{yymsp[1].minor.yy72 = 0;} + case 118: /* joinop ::= JOIN_KW nm nm JOIN */ +{yymsp[-3].minor.yy502 = sqlite3JoinType(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0);/*X-overwrites-A*/} break; - case 115: /* indexed_opt ::= INDEXED BY nm */ + case 119: /* on_opt ::= ON expr */ + case 136: /* having_opt ::= HAVING expr */ yytestcase(yyruleno==136); + case 143: /* where_opt ::= WHERE expr */ yytestcase(yyruleno==143); + case 208: /* case_else ::= ELSE expr */ yytestcase(yyruleno==208); +{yymsp[-1].minor.yy182 = yymsp[0].minor.yy182;} + break; + case 120: /* on_opt ::= */ + case 135: /* having_opt ::= */ yytestcase(yyruleno==135); + case 137: /* limit_opt ::= */ yytestcase(yyruleno==137); + case 142: /* where_opt ::= */ yytestcase(yyruleno==142); + case 209: /* case_else ::= */ yytestcase(yyruleno==209); + case 211: /* case_operand ::= */ yytestcase(yyruleno==211); +{yymsp[1].minor.yy182 = 0;} + break; + case 122: /* indexed_opt ::= INDEXED BY nm */ {yymsp[-2].minor.yy0 = yymsp[0].minor.yy0;} break; - case 116: /* indexed_opt ::= NOT INDEXED */ + case 123: /* indexed_opt ::= NOT INDEXED */ {yymsp[-1].minor.yy0.z=0; yymsp[-1].minor.yy0.n=1;} break; - case 117: /* using_opt ::= USING LP idlist RP */ -{yymsp[-3].minor.yy254 = yymsp[-1].minor.yy254;} + case 124: /* using_opt ::= USING LP idlist RP */ +{yymsp[-3].minor.yy510 = yymsp[-1].minor.yy510;} break; - case 118: /* using_opt ::= */ - case 146: /* idlist_opt ::= */ yytestcase(yyruleno==146); -{yymsp[1].minor.yy254 = 0;} + case 125: /* using_opt ::= */ + case 157: /* idlist_opt ::= */ yytestcase(yyruleno==157); +{yymsp[1].minor.yy510 = 0;} break; - case 120: /* orderby_opt ::= ORDER BY sortlist */ - case 127: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==127); -{yymsp[-2].minor.yy148 = yymsp[0].minor.yy148;} + case 127: /* orderby_opt ::= ORDER BY sortlist */ + case 134: /* groupby_opt ::= GROUP BY nexprlist */ yytestcase(yyruleno==134); +{yymsp[-2].minor.yy232 = yymsp[0].minor.yy232;} break; - case 121: /* sortlist ::= sortlist COMMA expr sortorder */ + case 128: /* sortlist ::= sortlist COMMA expr sortorder */ { - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148,yymsp[-1].minor.yy190.pExpr); - sqlite3ExprListSetSortOrder(yymsp[-3].minor.yy148,yymsp[0].minor.yy194); + yymsp[-3].minor.yy232 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy232,yymsp[-1].minor.yy182); + sqlite3ExprListSetSortOrder(yymsp[-3].minor.yy232,yymsp[0].minor.yy502); } break; - case 122: /* sortlist ::= expr sortorder */ + case 129: /* sortlist ::= expr sortorder */ { - yymsp[-1].minor.yy148 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy190.pExpr); /*A-overwrites-Y*/ - sqlite3ExprListSetSortOrder(yymsp[-1].minor.yy148,yymsp[0].minor.yy194); + yymsp[-1].minor.yy232 = sqlite3ExprListAppend(pParse,0,yymsp[-1].minor.yy182); /*A-overwrites-Y*/ + sqlite3ExprListSetSortOrder(yymsp[-1].minor.yy232,yymsp[0].minor.yy502); } break; - case 123: /* sortorder ::= ASC */ -{yymsp[0].minor.yy194 = SQLITE_SO_ASC;} + case 130: /* sortorder ::= ASC */ +{yymsp[0].minor.yy502 = SQLITE_SO_ASC;} break; - case 124: /* sortorder ::= DESC */ -{yymsp[0].minor.yy194 = SQLITE_SO_DESC;} + case 131: /* sortorder ::= DESC */ +{yymsp[0].minor.yy502 = SQLITE_SO_DESC;} break; - case 125: /* sortorder ::= */ -{yymsp[1].minor.yy194 = SQLITE_SO_UNDEFINED;} + case 132: /* sortorder ::= */ +{yymsp[1].minor.yy502 = SQLITE_SO_UNDEFINED;} break; - case 130: /* limit_opt ::= */ -{yymsp[1].minor.yy354.pLimit = 0; yymsp[1].minor.yy354.pOffset = 0;} + case 138: /* limit_opt ::= LIMIT expr */ +{yymsp[-1].minor.yy182 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[0].minor.yy182,0);} break; - case 131: /* limit_opt ::= LIMIT expr */ -{yymsp[-1].minor.yy354.pLimit = yymsp[0].minor.yy190.pExpr; yymsp[-1].minor.yy354.pOffset = 0;} + case 139: /* limit_opt ::= LIMIT expr OFFSET expr */ +{yymsp[-3].minor.yy182 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[-2].minor.yy182,yymsp[0].minor.yy182);} break; - case 132: /* limit_opt ::= LIMIT expr OFFSET expr */ -{yymsp[-3].minor.yy354.pLimit = yymsp[-2].minor.yy190.pExpr; yymsp[-3].minor.yy354.pOffset = yymsp[0].minor.yy190.pExpr;} + case 140: /* limit_opt ::= LIMIT expr COMMA expr */ +{yymsp[-3].minor.yy182 = sqlite3PExpr(pParse,TK_LIMIT,yymsp[0].minor.yy182,yymsp[-2].minor.yy182);} break; - case 133: /* limit_opt ::= LIMIT expr COMMA expr */ -{yymsp[-3].minor.yy354.pOffset = yymsp[-2].minor.yy190.pExpr; yymsp[-3].minor.yy354.pLimit = yymsp[0].minor.yy190.pExpr;} - break; - case 134: /* cmd ::= with DELETE FROM fullname indexed_opt where_opt */ + case 141: /* cmd ::= with DELETE FROM xfullname indexed_opt where_opt */ { - sqlite3WithPush(pParse, yymsp[-5].minor.yy285, 1); - sqlite3SrcListIndexedBy(pParse, yymsp[-2].minor.yy185, &yymsp[-1].minor.yy0); - sqlite3DeleteFrom(pParse,yymsp[-2].minor.yy185,yymsp[0].minor.yy72); + sqlite3SrcListIndexedBy(pParse, yymsp[-2].minor.yy427, &yymsp[-1].minor.yy0); + sqlite3DeleteFrom(pParse,yymsp[-2].minor.yy427,yymsp[0].minor.yy182,0,0); } break; - case 137: /* cmd ::= with UPDATE orconf fullname indexed_opt SET setlist where_opt */ + case 144: /* cmd ::= with UPDATE orconf xfullname indexed_opt SET setlist where_opt */ { - sqlite3WithPush(pParse, yymsp[-7].minor.yy285, 1); - sqlite3SrcListIndexedBy(pParse, yymsp[-4].minor.yy185, &yymsp[-3].minor.yy0); - sqlite3ExprListCheckLength(pParse,yymsp[-1].minor.yy148,"set list"); - sqlite3Update(pParse,yymsp[-4].minor.yy185,yymsp[-1].minor.yy148,yymsp[0].minor.yy72,yymsp[-5].minor.yy194); + sqlite3SrcListIndexedBy(pParse, yymsp[-4].minor.yy427, &yymsp[-3].minor.yy0); + sqlite3ExprListCheckLength(pParse,yymsp[-1].minor.yy232,"set list"); + sqlite3Update(pParse,yymsp[-4].minor.yy427,yymsp[-1].minor.yy232,yymsp[0].minor.yy182,yymsp[-5].minor.yy502,0,0,0); } break; - case 138: /* setlist ::= setlist COMMA nm EQ expr */ + case 145: /* setlist ::= setlist COMMA nm EQ expr */ { - yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy148, yymsp[0].minor.yy190.pExpr); - sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy148, &yymsp[-2].minor.yy0, 1); + yymsp[-4].minor.yy232 = sqlite3ExprListAppend(pParse, yymsp[-4].minor.yy232, yymsp[0].minor.yy182); + sqlite3ExprListSetName(pParse, yymsp[-4].minor.yy232, &yymsp[-2].minor.yy0, 1); } break; - case 139: /* setlist ::= setlist COMMA LP idlist RP EQ expr */ + case 146: /* setlist ::= setlist COMMA LP idlist RP EQ expr */ { - yymsp[-6].minor.yy148 = sqlite3ExprListAppendVector(pParse, yymsp[-6].minor.yy148, yymsp[-3].minor.yy254, yymsp[0].minor.yy190.pExpr); + yymsp[-6].minor.yy232 = sqlite3ExprListAppendVector(pParse, yymsp[-6].minor.yy232, yymsp[-3].minor.yy510, yymsp[0].minor.yy182); } break; - case 140: /* setlist ::= nm EQ expr */ + case 147: /* setlist ::= nm EQ expr */ { - yylhsminor.yy148 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy190.pExpr); - sqlite3ExprListSetName(pParse, yylhsminor.yy148, &yymsp[-2].minor.yy0, 1); + yylhsminor.yy232 = sqlite3ExprListAppend(pParse, 0, yymsp[0].minor.yy182); + sqlite3ExprListSetName(pParse, yylhsminor.yy232, &yymsp[-2].minor.yy0, 1); } - yymsp[-2].minor.yy148 = yylhsminor.yy148; + yymsp[-2].minor.yy232 = yylhsminor.yy232; break; - case 141: /* setlist ::= LP idlist RP EQ expr */ + case 148: /* setlist ::= LP idlist RP EQ expr */ { - yymsp[-4].minor.yy148 = sqlite3ExprListAppendVector(pParse, 0, yymsp[-3].minor.yy254, yymsp[0].minor.yy190.pExpr); + yymsp[-4].minor.yy232 = sqlite3ExprListAppendVector(pParse, 0, yymsp[-3].minor.yy510, yymsp[0].minor.yy182); } break; - case 142: /* cmd ::= with insert_cmd INTO fullname idlist_opt select */ + case 149: /* cmd ::= with insert_cmd INTO xfullname idlist_opt select upsert */ { - sqlite3WithPush(pParse, yymsp[-5].minor.yy285, 1); - sqlite3Insert(pParse, yymsp[-2].minor.yy185, yymsp[0].minor.yy243, yymsp[-1].minor.yy254, yymsp[-4].minor.yy194); + sqlite3Insert(pParse, yymsp[-3].minor.yy427, yymsp[-1].minor.yy399, yymsp[-2].minor.yy510, yymsp[-5].minor.yy502, yymsp[0].minor.yy198); } break; - case 143: /* cmd ::= with insert_cmd INTO fullname idlist_opt DEFAULT VALUES */ + case 150: /* cmd ::= with insert_cmd INTO xfullname idlist_opt DEFAULT VALUES */ { - sqlite3WithPush(pParse, yymsp[-6].minor.yy285, 1); - sqlite3Insert(pParse, yymsp[-3].minor.yy185, 0, yymsp[-2].minor.yy254, yymsp[-5].minor.yy194); + sqlite3Insert(pParse, yymsp[-3].minor.yy427, 0, yymsp[-2].minor.yy510, yymsp[-5].minor.yy502, 0); } break; - case 147: /* idlist_opt ::= LP idlist RP */ -{yymsp[-2].minor.yy254 = yymsp[-1].minor.yy254;} + case 151: /* upsert ::= */ +{ yymsp[1].minor.yy198 = 0; } + break; + case 152: /* upsert ::= ON CONFLICT LP sortlist RP where_opt DO UPDATE SET setlist where_opt */ +{ yymsp[-10].minor.yy198 = sqlite3UpsertNew(pParse->db,yymsp[-7].minor.yy232,yymsp[-5].minor.yy182,yymsp[-1].minor.yy232,yymsp[0].minor.yy182);} break; - case 148: /* idlist ::= idlist COMMA nm */ -{yymsp[-2].minor.yy254 = sqlite3IdListAppend(pParse->db,yymsp[-2].minor.yy254,&yymsp[0].minor.yy0);} + case 153: /* upsert ::= ON CONFLICT LP sortlist RP where_opt DO NOTHING */ +{ yymsp[-7].minor.yy198 = sqlite3UpsertNew(pParse->db,yymsp[-4].minor.yy232,yymsp[-2].minor.yy182,0,0); } break; - case 149: /* idlist ::= nm */ -{yymsp[0].minor.yy254 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0); /*A-overwrites-Y*/} + case 154: /* upsert ::= ON CONFLICT DO NOTHING */ +{ yymsp[-3].minor.yy198 = sqlite3UpsertNew(pParse->db,0,0,0,0); } break; - case 150: /* expr ::= LP expr RP */ -{spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ yymsp[-2].minor.yy190.pExpr = yymsp[-1].minor.yy190.pExpr;} + case 158: /* idlist_opt ::= LP idlist RP */ +{yymsp[-2].minor.yy510 = yymsp[-1].minor.yy510;} break; - case 151: /* term ::= NULL */ - case 156: /* term ::= FLOAT|BLOB */ yytestcase(yyruleno==156); - case 157: /* term ::= STRING */ yytestcase(yyruleno==157); -{spanExpr(&yymsp[0].minor.yy190,pParse,yymsp[0].major,yymsp[0].minor.yy0);/*A-overwrites-X*/} + case 159: /* idlist ::= idlist COMMA nm */ +{yymsp[-2].minor.yy510 = sqlite3IdListAppend(pParse->db,yymsp[-2].minor.yy510,&yymsp[0].minor.yy0);} break; - case 152: /* expr ::= ID|INDEXED */ - case 153: /* expr ::= JOIN_KW */ yytestcase(yyruleno==153); -{spanExpr(&yymsp[0].minor.yy190,pParse,TK_ID,yymsp[0].minor.yy0); /*A-overwrites-X*/} + case 160: /* idlist ::= nm */ +{yymsp[0].minor.yy510 = sqlite3IdListAppend(pParse->db,0,&yymsp[0].minor.yy0); /*A-overwrites-Y*/} break; - case 154: /* expr ::= nm DOT nm */ + case 161: /* expr ::= LP expr RP */ +{yymsp[-2].minor.yy182 = yymsp[-1].minor.yy182;} + break; + case 162: /* expr ::= ID|INDEXED */ + case 163: /* expr ::= JOIN_KW */ yytestcase(yyruleno==163); +{yymsp[0].minor.yy182=tokenExpr(pParse,TK_ID,yymsp[0].minor.yy0); /*A-overwrites-X*/} + break; + case 164: /* expr ::= nm DOT nm */ { Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1); - spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp2); + yylhsminor.yy182 = sqlite3PExpr(pParse, TK_DOT, temp1, temp2); } + yymsp[-2].minor.yy182 = yylhsminor.yy182; break; - case 155: /* expr ::= nm DOT nm DOT nm */ + case 165: /* expr ::= nm DOT nm DOT nm */ { Expr *temp1 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-4].minor.yy0, 1); Expr *temp2 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[-2].minor.yy0, 1); Expr *temp3 = sqlite3ExprAlloc(pParse->db, TK_ID, &yymsp[0].minor.yy0, 1); Expr *temp4 = sqlite3PExpr(pParse, TK_DOT, temp2, temp3); - spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_DOT, temp1, temp4); + yylhsminor.yy182 = sqlite3PExpr(pParse, TK_DOT, temp1, temp4); } + yymsp[-4].minor.yy182 = yylhsminor.yy182; break; - case 158: /* term ::= INTEGER */ + case 166: /* term ::= NULL|FLOAT|BLOB */ + case 167: /* term ::= STRING */ yytestcase(yyruleno==167); +{yymsp[0].minor.yy182=tokenExpr(pParse,yymsp[0].major,yymsp[0].minor.yy0); /*A-overwrites-X*/} + break; + case 168: /* term ::= INTEGER */ { - yylhsminor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_INTEGER, &yymsp[0].minor.yy0, 1); - yylhsminor.yy190.zStart = yymsp[0].minor.yy0.z; - yylhsminor.yy190.zEnd = yymsp[0].minor.yy0.z + yymsp[0].minor.yy0.n; - if( yylhsminor.yy190.pExpr ) yylhsminor.yy190.pExpr->flags |= EP_Leaf; + yylhsminor.yy182 = sqlite3ExprAlloc(pParse->db, TK_INTEGER, &yymsp[0].minor.yy0, 1); } - yymsp[0].minor.yy190 = yylhsminor.yy190; + yymsp[0].minor.yy182 = yylhsminor.yy182; break; - case 159: /* expr ::= VARIABLE */ + case 169: /* expr ::= VARIABLE */ { if( !(yymsp[0].minor.yy0.z[0]=='#' && sqlite3Isdigit(yymsp[0].minor.yy0.z[1])) ){ u32 n = yymsp[0].minor.yy0.n; - spanExpr(&yymsp[0].minor.yy190, pParse, TK_VARIABLE, yymsp[0].minor.yy0); - sqlite3ExprAssignVarNumber(pParse, yymsp[0].minor.yy190.pExpr, n); + yymsp[0].minor.yy182 = tokenExpr(pParse, TK_VARIABLE, yymsp[0].minor.yy0); + sqlite3ExprAssignVarNumber(pParse, yymsp[0].minor.yy182, n); }else{ /* When doing a nested parse, one can include terms in an expression ** that look like this: #1 #2 ... These terms refer to registers ** in the virtual machine. #N is the N-th register. */ Token t = yymsp[0].minor.yy0; /*A-overwrites-X*/ assert( t.n>=2 ); - spanSet(&yymsp[0].minor.yy190, &t, &t); if( pParse->nested==0 ){ sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &t); - yymsp[0].minor.yy190.pExpr = 0; + yymsp[0].minor.yy182 = 0; }else{ - yymsp[0].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_REGISTER, 0, 0); - if( yymsp[0].minor.yy190.pExpr ) sqlite3GetInt32(&t.z[1], &yymsp[0].minor.yy190.pExpr->iTable); + yymsp[0].minor.yy182 = sqlite3PExpr(pParse, TK_REGISTER, 0, 0); + if( yymsp[0].minor.yy182 ) sqlite3GetInt32(&t.z[1], &yymsp[0].minor.yy182->iTable); } } } break; - case 160: /* expr ::= expr COLLATE ID|STRING */ + case 170: /* expr ::= expr COLLATE ID|STRING */ { - yymsp[-2].minor.yy190.pExpr = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy190.pExpr, &yymsp[0].minor.yy0, 1); - yymsp[-2].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + yymsp[-2].minor.yy182 = sqlite3ExprAddCollateToken(pParse, yymsp[-2].minor.yy182, &yymsp[0].minor.yy0, 1); } break; - case 161: /* expr ::= CAST LP expr AS typetoken RP */ + case 171: /* expr ::= CAST LP expr AS typetoken RP */ { - spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-5].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_CAST, &yymsp[-1].minor.yy0, 1); - sqlite3ExprAttachSubtrees(pParse->db, yymsp[-5].minor.yy190.pExpr, yymsp[-3].minor.yy190.pExpr, 0); + yymsp[-5].minor.yy182 = sqlite3ExprAlloc(pParse->db, TK_CAST, &yymsp[-1].minor.yy0, 1); + sqlite3ExprAttachSubtrees(pParse->db, yymsp[-5].minor.yy182, yymsp[-3].minor.yy182, 0); } break; - case 162: /* expr ::= ID|INDEXED LP distinct exprlist RP */ + case 172: /* expr ::= ID|INDEXED LP distinct exprlist RP */ { - if( yymsp[-1].minor.yy148 && yymsp[-1].minor.yy148->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){ + if( yymsp[-1].minor.yy232 && yymsp[-1].minor.yy232->nExpr>pParse->db->aLimit[SQLITE_LIMIT_FUNCTION_ARG] ){ sqlite3ErrorMsg(pParse, "too many arguments on function %T", &yymsp[-4].minor.yy0); } - yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy148, &yymsp[-4].minor.yy0); - spanSet(&yylhsminor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); - if( yymsp[-2].minor.yy194==SF_Distinct && yylhsminor.yy190.pExpr ){ - yylhsminor.yy190.pExpr->flags |= EP_Distinct; + yylhsminor.yy182 = sqlite3ExprFunction(pParse, yymsp[-1].minor.yy232, &yymsp[-4].minor.yy0); + if( yymsp[-2].minor.yy502==SF_Distinct && yylhsminor.yy182 ){ + yylhsminor.yy182->flags |= EP_Distinct; } } - yymsp[-4].minor.yy190 = yylhsminor.yy190; + yymsp[-4].minor.yy182 = yylhsminor.yy182; break; - case 163: /* expr ::= ID|INDEXED LP STAR RP */ + case 173: /* expr ::= ID|INDEXED LP STAR RP */ { - yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0); - spanSet(&yylhsminor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); + yylhsminor.yy182 = sqlite3ExprFunction(pParse, 0, &yymsp[-3].minor.yy0); } - yymsp[-3].minor.yy190 = yylhsminor.yy190; + yymsp[-3].minor.yy182 = yylhsminor.yy182; break; - case 164: /* term ::= CTIME_KW */ + case 174: /* term ::= CTIME_KW */ { - yylhsminor.yy190.pExpr = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0); - spanSet(&yylhsminor.yy190, &yymsp[0].minor.yy0, &yymsp[0].minor.yy0); + yylhsminor.yy182 = sqlite3ExprFunction(pParse, 0, &yymsp[0].minor.yy0); } - yymsp[0].minor.yy190 = yylhsminor.yy190; + yymsp[0].minor.yy182 = yylhsminor.yy182; break; - case 165: /* expr ::= LP nexprlist COMMA expr RP */ + case 175: /* expr ::= LP nexprlist COMMA expr RP */ { - ExprList *pList = sqlite3ExprListAppend(pParse, yymsp[-3].minor.yy148, yymsp[-1].minor.yy190.pExpr); - yylhsminor.yy190.pExpr = sqlite3PExpr(pParse, TK_VECTOR, 0, 0); - if( yylhsminor.yy190.pExpr ){ - yylhsminor.yy190.pExpr->x.pList = pList; - spanSet(&yylhsminor.yy190, &yymsp[-4].minor.yy0, &yymsp[0].minor.yy0); + ExprList *pList = sqlite3ExprListAppend(pParse, yymsp[-3].minor.yy232, yymsp[-1].minor.yy182); + yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_VECTOR, 0, 0); + if( yymsp[-4].minor.yy182 ){ + yymsp[-4].minor.yy182->x.pList = pList; }else{ sqlite3ExprListDelete(pParse->db, pList); } } - yymsp[-4].minor.yy190 = yylhsminor.yy190; - break; - case 166: /* expr ::= expr AND expr */ - case 167: /* expr ::= expr OR expr */ yytestcase(yyruleno==167); - case 168: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==168); - case 169: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==169); - case 170: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==170); - case 171: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==171); - case 172: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==172); - case 173: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==173); -{spanBinaryExpr(pParse,yymsp[-1].major,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy190);} break; - case 174: /* likeop ::= LIKE_KW|MATCH */ -{yymsp[0].minor.yy0=yymsp[0].minor.yy0;/*A-overwrites-X*/} + case 176: /* expr ::= expr AND expr */ + case 177: /* expr ::= expr OR expr */ yytestcase(yyruleno==177); + case 178: /* expr ::= expr LT|GT|GE|LE expr */ yytestcase(yyruleno==178); + case 179: /* expr ::= expr EQ|NE expr */ yytestcase(yyruleno==179); + case 180: /* expr ::= expr BITAND|BITOR|LSHIFT|RSHIFT expr */ yytestcase(yyruleno==180); + case 181: /* expr ::= expr PLUS|MINUS expr */ yytestcase(yyruleno==181); + case 182: /* expr ::= expr STAR|SLASH|REM expr */ yytestcase(yyruleno==182); + case 183: /* expr ::= expr CONCAT expr */ yytestcase(yyruleno==183); +{yymsp[-2].minor.yy182=sqlite3PExpr(pParse,yymsp[-1].major,yymsp[-2].minor.yy182,yymsp[0].minor.yy182);} break; - case 175: /* likeop ::= NOT LIKE_KW|MATCH */ + case 184: /* likeop ::= NOT LIKE_KW|MATCH */ {yymsp[-1].minor.yy0=yymsp[0].minor.yy0; yymsp[-1].minor.yy0.n|=0x80000000; /*yymsp[-1].minor.yy0-overwrite-yymsp[0].minor.yy0*/} break; - case 176: /* expr ::= expr likeop expr */ + case 185: /* expr ::= expr likeop expr */ { ExprList *pList; int bNot = yymsp[-1].minor.yy0.n & 0x80000000; yymsp[-1].minor.yy0.n &= 0x7fffffff; - pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy190.pExpr); - yymsp[-2].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy0); - exprNot(pParse, bNot, &yymsp[-2].minor.yy190); - yymsp[-2].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd; - if( yymsp[-2].minor.yy190.pExpr ) yymsp[-2].minor.yy190.pExpr->flags |= EP_InfixFunc; + pList = sqlite3ExprListAppend(pParse,0, yymsp[0].minor.yy182); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[-2].minor.yy182); + yymsp[-2].minor.yy182 = sqlite3ExprFunction(pParse, pList, &yymsp[-1].minor.yy0); + if( bNot ) yymsp[-2].minor.yy182 = sqlite3PExpr(pParse, TK_NOT, yymsp[-2].minor.yy182, 0); + if( yymsp[-2].minor.yy182 ) yymsp[-2].minor.yy182->flags |= EP_InfixFunc; } break; - case 177: /* expr ::= expr likeop expr ESCAPE expr */ + case 186: /* expr ::= expr likeop expr ESCAPE expr */ { ExprList *pList; int bNot = yymsp[-3].minor.yy0.n & 0x80000000; yymsp[-3].minor.yy0.n &= 0x7fffffff; - pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy0); - exprNot(pParse, bNot, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd; - if( yymsp[-4].minor.yy190.pExpr ) yymsp[-4].minor.yy190.pExpr->flags |= EP_InfixFunc; + pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy182); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[-4].minor.yy182); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy182); + yymsp[-4].minor.yy182 = sqlite3ExprFunction(pParse, pList, &yymsp[-3].minor.yy0); + if( bNot ) yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy182, 0); + if( yymsp[-4].minor.yy182 ) yymsp[-4].minor.yy182->flags |= EP_InfixFunc; } break; - case 178: /* expr ::= expr ISNULL|NOTNULL */ -{spanUnaryPostfix(pParse,yymsp[0].major,&yymsp[-1].minor.yy190,&yymsp[0].minor.yy0);} + case 187: /* expr ::= expr ISNULL|NOTNULL */ +{yymsp[-1].minor.yy182 = sqlite3PExpr(pParse,yymsp[0].major,yymsp[-1].minor.yy182,0);} break; - case 179: /* expr ::= expr NOT NULL */ -{spanUnaryPostfix(pParse,TK_NOTNULL,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy0);} + case 188: /* expr ::= expr NOT NULL */ +{yymsp[-2].minor.yy182 = sqlite3PExpr(pParse,TK_NOTNULL,yymsp[-2].minor.yy182,0);} break; - case 180: /* expr ::= expr IS expr */ + case 189: /* expr ::= expr IS expr */ { - spanBinaryExpr(pParse,TK_IS,&yymsp[-2].minor.yy190,&yymsp[0].minor.yy190); - binaryToUnaryIfNull(pParse, yymsp[0].minor.yy190.pExpr, yymsp[-2].minor.yy190.pExpr, TK_ISNULL); + yymsp[-2].minor.yy182 = sqlite3PExpr(pParse,TK_IS,yymsp[-2].minor.yy182,yymsp[0].minor.yy182); + binaryToUnaryIfNull(pParse, yymsp[0].minor.yy182, yymsp[-2].minor.yy182, TK_ISNULL); } break; - case 181: /* expr ::= expr IS NOT expr */ + case 190: /* expr ::= expr IS NOT expr */ { - spanBinaryExpr(pParse,TK_ISNOT,&yymsp[-3].minor.yy190,&yymsp[0].minor.yy190); - binaryToUnaryIfNull(pParse, yymsp[0].minor.yy190.pExpr, yymsp[-3].minor.yy190.pExpr, TK_NOTNULL); + yymsp[-3].minor.yy182 = sqlite3PExpr(pParse,TK_ISNOT,yymsp[-3].minor.yy182,yymsp[0].minor.yy182); + binaryToUnaryIfNull(pParse, yymsp[0].minor.yy182, yymsp[-3].minor.yy182, TK_NOTNULL); } break; - case 182: /* expr ::= NOT expr */ - case 183: /* expr ::= BITNOT expr */ yytestcase(yyruleno==183); -{spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,yymsp[-1].major,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/} + case 191: /* expr ::= NOT expr */ + case 192: /* expr ::= BITNOT expr */ yytestcase(yyruleno==192); +{yymsp[-1].minor.yy182 = sqlite3PExpr(pParse, yymsp[-1].major, yymsp[0].minor.yy182, 0);/*A-overwrites-B*/} break; - case 184: /* expr ::= MINUS expr */ -{spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,TK_UMINUS,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/} + case 193: /* expr ::= MINUS expr */ +{yymsp[-1].minor.yy182 = sqlite3PExpr(pParse, TK_UMINUS, yymsp[0].minor.yy182, 0);} break; - case 185: /* expr ::= PLUS expr */ -{spanUnaryPrefix(&yymsp[-1].minor.yy190,pParse,TK_UPLUS,&yymsp[0].minor.yy190,&yymsp[-1].minor.yy0);/*A-overwrites-B*/} + case 194: /* expr ::= PLUS expr */ +{yymsp[-1].minor.yy182 = sqlite3PExpr(pParse, TK_UPLUS, yymsp[0].minor.yy182, 0);} break; - case 186: /* between_op ::= BETWEEN */ - case 189: /* in_op ::= IN */ yytestcase(yyruleno==189); -{yymsp[0].minor.yy194 = 0;} + case 195: /* between_op ::= BETWEEN */ + case 198: /* in_op ::= IN */ yytestcase(yyruleno==198); +{yymsp[0].minor.yy502 = 0;} break; - case 188: /* expr ::= expr between_op expr AND expr */ + case 197: /* expr ::= expr between_op expr AND expr */ { - ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr); - pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy190.pExpr, 0); - if( yymsp[-4].minor.yy190.pExpr ){ - yymsp[-4].minor.yy190.pExpr->x.pList = pList; + ExprList *pList = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy182); + pList = sqlite3ExprListAppend(pParse,pList, yymsp[0].minor.yy182); + yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_BETWEEN, yymsp[-4].minor.yy182, 0); + if( yymsp[-4].minor.yy182 ){ + yymsp[-4].minor.yy182->x.pList = pList; }else{ sqlite3ExprListDelete(pParse->db, pList); } - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = yymsp[0].minor.yy190.zEnd; + if( yymsp[-3].minor.yy502 ) yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy182, 0); } break; - case 191: /* expr ::= expr in_op LP exprlist RP */ + case 200: /* expr ::= expr in_op LP exprlist RP */ { - if( yymsp[-1].minor.yy148==0 ){ + if( yymsp[-1].minor.yy232==0 ){ /* Expressions of the form ** ** expr1 IN () @@ -137413,9 +144771,9 @@ static void yy_reduce( ** simplify to constants 0 (false) and 1 (true), respectively, ** regardless of the value of expr1. */ - sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy190.pExpr); - yymsp[-4].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[yymsp[-3].minor.yy194],1); - }else if( yymsp[-1].minor.yy148->nExpr==1 ){ + sqlite3ExprDelete(pParse->db, yymsp[-4].minor.yy182); + yymsp[-4].minor.yy182 = sqlite3ExprAlloc(pParse->db, TK_INTEGER,&sqlite3IntTokens[yymsp[-3].minor.yy502],1); + }else if( yymsp[-1].minor.yy232->nExpr==1 ){ /* Expressions of the form: ** ** expr1 IN (?1) @@ -137432,204 +144790,195 @@ static void yy_reduce( ** affinity or the collating sequence to use for comparison. Otherwise, ** the semantics would be subtly different from IN or NOT IN. */ - Expr *pRHS = yymsp[-1].minor.yy148->a[0].pExpr; - yymsp[-1].minor.yy148->a[0].pExpr = 0; - sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy148); + Expr *pRHS = yymsp[-1].minor.yy232->a[0].pExpr; + yymsp[-1].minor.yy232->a[0].pExpr = 0; + sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy232); /* pRHS cannot be NULL because a malloc error would have been detected ** before now and control would have never reached this point */ if( ALWAYS(pRHS) ){ pRHS->flags &= ~EP_Collate; pRHS->flags |= EP_Generic; } - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, yymsp[-3].minor.yy194 ? TK_NE : TK_EQ, yymsp[-4].minor.yy190.pExpr, pRHS); + yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, yymsp[-3].minor.yy502 ? TK_NE : TK_EQ, yymsp[-4].minor.yy182, pRHS); }else{ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); - if( yymsp[-4].minor.yy190.pExpr ){ - yymsp[-4].minor.yy190.pExpr->x.pList = yymsp[-1].minor.yy148; - sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy190.pExpr); + yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy182, 0); + if( yymsp[-4].minor.yy182 ){ + yymsp[-4].minor.yy182->x.pList = yymsp[-1].minor.yy232; + sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy182); }else{ - sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy148); + sqlite3ExprListDelete(pParse->db, yymsp[-1].minor.yy232); } - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); + if( yymsp[-3].minor.yy502 ) yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy182, 0); } - yymsp[-4].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; } break; - case 192: /* expr ::= LP select RP */ + case 201: /* expr ::= LP select RP */ { - spanSet(&yymsp[-2].minor.yy190,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ - yymsp[-2].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_SELECT, 0, 0); - sqlite3PExprAddSelect(pParse, yymsp[-2].minor.yy190.pExpr, yymsp[-1].minor.yy243); + yymsp[-2].minor.yy182 = sqlite3PExpr(pParse, TK_SELECT, 0, 0); + sqlite3PExprAddSelect(pParse, yymsp[-2].minor.yy182, yymsp[-1].minor.yy399); } break; - case 193: /* expr ::= expr in_op LP select RP */ + case 202: /* expr ::= expr in_op LP select RP */ { - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); - sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy190.pExpr, yymsp[-1].minor.yy243); - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = &yymsp[0].minor.yy0.z[yymsp[0].minor.yy0.n]; + yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy182, 0); + sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy182, yymsp[-1].minor.yy399); + if( yymsp[-3].minor.yy502 ) yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy182, 0); } break; - case 194: /* expr ::= expr in_op nm dbnm paren_exprlist */ + case 203: /* expr ::= expr in_op nm dbnm paren_exprlist */ { SrcList *pSrc = sqlite3SrcListAppend(pParse->db, 0,&yymsp[-2].minor.yy0,&yymsp[-1].minor.yy0); - Select *pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0,0); - if( yymsp[0].minor.yy148 ) sqlite3SrcListFuncArgs(pParse, pSelect ? pSrc : 0, yymsp[0].minor.yy148); - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy190.pExpr, 0); - sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy190.pExpr, pSelect); - exprNot(pParse, yymsp[-3].minor.yy194, &yymsp[-4].minor.yy190); - yymsp[-4].minor.yy190.zEnd = yymsp[-1].minor.yy0.z ? &yymsp[-1].minor.yy0.z[yymsp[-1].minor.yy0.n] : &yymsp[-2].minor.yy0.z[yymsp[-2].minor.yy0.n]; + Select *pSelect = sqlite3SelectNew(pParse, 0,pSrc,0,0,0,0,0,0); + if( yymsp[0].minor.yy232 ) sqlite3SrcListFuncArgs(pParse, pSelect ? pSrc : 0, yymsp[0].minor.yy232); + yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_IN, yymsp[-4].minor.yy182, 0); + sqlite3PExprAddSelect(pParse, yymsp[-4].minor.yy182, pSelect); + if( yymsp[-3].minor.yy502 ) yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_NOT, yymsp[-4].minor.yy182, 0); } break; - case 195: /* expr ::= EXISTS LP select RP */ + case 204: /* expr ::= EXISTS LP select RP */ { Expr *p; - spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-B*/ - p = yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_EXISTS, 0, 0); - sqlite3PExprAddSelect(pParse, p, yymsp[-1].minor.yy243); + p = yymsp[-3].minor.yy182 = sqlite3PExpr(pParse, TK_EXISTS, 0, 0); + sqlite3PExprAddSelect(pParse, p, yymsp[-1].minor.yy399); } break; - case 196: /* expr ::= CASE case_operand case_exprlist case_else END */ + case 205: /* expr ::= CASE case_operand case_exprlist case_else END */ { - spanSet(&yymsp[-4].minor.yy190,&yymsp[-4].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-C*/ - yymsp[-4].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy72, 0); - if( yymsp[-4].minor.yy190.pExpr ){ - yymsp[-4].minor.yy190.pExpr->x.pList = yymsp[-1].minor.yy72 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy148,yymsp[-1].minor.yy72) : yymsp[-2].minor.yy148; - sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy190.pExpr); + yymsp[-4].minor.yy182 = sqlite3PExpr(pParse, TK_CASE, yymsp[-3].minor.yy182, 0); + if( yymsp[-4].minor.yy182 ){ + yymsp[-4].minor.yy182->x.pList = yymsp[-1].minor.yy182 ? sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy232,yymsp[-1].minor.yy182) : yymsp[-2].minor.yy232; + sqlite3ExprSetHeightAndFlags(pParse, yymsp[-4].minor.yy182); }else{ - sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy148); - sqlite3ExprDelete(pParse->db, yymsp[-1].minor.yy72); + sqlite3ExprListDelete(pParse->db, yymsp[-2].minor.yy232); + sqlite3ExprDelete(pParse->db, yymsp[-1].minor.yy182); } } break; - case 197: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */ + case 206: /* case_exprlist ::= case_exprlist WHEN expr THEN expr */ { - yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy148, yymsp[-2].minor.yy190.pExpr); - yymsp[-4].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy148, yymsp[0].minor.yy190.pExpr); + yymsp[-4].minor.yy232 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy232, yymsp[-2].minor.yy182); + yymsp[-4].minor.yy232 = sqlite3ExprListAppend(pParse,yymsp[-4].minor.yy232, yymsp[0].minor.yy182); } break; - case 198: /* case_exprlist ::= WHEN expr THEN expr */ + case 207: /* case_exprlist ::= WHEN expr THEN expr */ { - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy190.pExpr); - yymsp[-3].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy148, yymsp[0].minor.yy190.pExpr); + yymsp[-3].minor.yy232 = sqlite3ExprListAppend(pParse,0, yymsp[-2].minor.yy182); + yymsp[-3].minor.yy232 = sqlite3ExprListAppend(pParse,yymsp[-3].minor.yy232, yymsp[0].minor.yy182); } break; - case 201: /* case_operand ::= expr */ -{yymsp[0].minor.yy72 = yymsp[0].minor.yy190.pExpr; /*A-overwrites-X*/} + case 210: /* case_operand ::= expr */ +{yymsp[0].minor.yy182 = yymsp[0].minor.yy182; /*A-overwrites-X*/} break; - case 204: /* nexprlist ::= nexprlist COMMA expr */ -{yymsp[-2].minor.yy148 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy148,yymsp[0].minor.yy190.pExpr);} + case 213: /* nexprlist ::= nexprlist COMMA expr */ +{yymsp[-2].minor.yy232 = sqlite3ExprListAppend(pParse,yymsp[-2].minor.yy232,yymsp[0].minor.yy182);} break; - case 205: /* nexprlist ::= expr */ -{yymsp[0].minor.yy148 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy190.pExpr); /*A-overwrites-Y*/} + case 214: /* nexprlist ::= expr */ +{yymsp[0].minor.yy232 = sqlite3ExprListAppend(pParse,0,yymsp[0].minor.yy182); /*A-overwrites-Y*/} break; - case 207: /* paren_exprlist ::= LP exprlist RP */ - case 212: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==212); -{yymsp[-2].minor.yy148 = yymsp[-1].minor.yy148;} + case 216: /* paren_exprlist ::= LP exprlist RP */ + case 221: /* eidlist_opt ::= LP eidlist RP */ yytestcase(yyruleno==221); +{yymsp[-2].minor.yy232 = yymsp[-1].minor.yy232;} break; - case 208: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */ + case 217: /* cmd ::= createkw uniqueflag INDEX ifnotexists nm dbnm ON nm LP sortlist RP where_opt */ { sqlite3CreateIndex(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, - sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy148, yymsp[-10].minor.yy194, - &yymsp[-11].minor.yy0, yymsp[0].minor.yy72, SQLITE_SO_ASC, yymsp[-8].minor.yy194, SQLITE_IDXTYPE_APPDEF); + sqlite3SrcListAppend(pParse->db,0,&yymsp[-4].minor.yy0,0), yymsp[-2].minor.yy232, yymsp[-10].minor.yy502, + &yymsp[-11].minor.yy0, yymsp[0].minor.yy182, SQLITE_SO_ASC, yymsp[-8].minor.yy502, SQLITE_IDXTYPE_APPDEF); } break; - case 209: /* uniqueflag ::= UNIQUE */ - case 250: /* raisetype ::= ABORT */ yytestcase(yyruleno==250); -{yymsp[0].minor.yy194 = OE_Abort;} + case 218: /* uniqueflag ::= UNIQUE */ + case 258: /* raisetype ::= ABORT */ yytestcase(yyruleno==258); +{yymsp[0].minor.yy502 = OE_Abort;} break; - case 210: /* uniqueflag ::= */ -{yymsp[1].minor.yy194 = OE_None;} + case 219: /* uniqueflag ::= */ +{yymsp[1].minor.yy502 = OE_None;} break; - case 213: /* eidlist ::= eidlist COMMA nm collate sortorder */ + case 222: /* eidlist ::= eidlist COMMA nm collate sortorder */ { - yymsp[-4].minor.yy148 = parserAddExprIdListTerm(pParse, yymsp[-4].minor.yy148, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy194, yymsp[0].minor.yy194); + yymsp[-4].minor.yy232 = parserAddExprIdListTerm(pParse, yymsp[-4].minor.yy232, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy502, yymsp[0].minor.yy502); } break; - case 214: /* eidlist ::= nm collate sortorder */ + case 223: /* eidlist ::= nm collate sortorder */ { - yymsp[-2].minor.yy148 = parserAddExprIdListTerm(pParse, 0, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy194, yymsp[0].minor.yy194); /*A-overwrites-Y*/ + yymsp[-2].minor.yy232 = parserAddExprIdListTerm(pParse, 0, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy502, yymsp[0].minor.yy502); /*A-overwrites-Y*/ } break; - case 217: /* cmd ::= DROP INDEX ifexists fullname */ -{sqlite3DropIndex(pParse, yymsp[0].minor.yy185, yymsp[-1].minor.yy194);} + case 226: /* cmd ::= DROP INDEX ifexists fullname */ +{sqlite3DropIndex(pParse, yymsp[0].minor.yy427, yymsp[-1].minor.yy502);} break; - case 218: /* cmd ::= VACUUM */ + case 227: /* cmd ::= VACUUM */ {sqlite3Vacuum(pParse,0);} break; - case 219: /* cmd ::= VACUUM nm */ + case 228: /* cmd ::= VACUUM nm */ {sqlite3Vacuum(pParse,&yymsp[0].minor.yy0);} break; - case 220: /* cmd ::= PRAGMA nm dbnm */ + case 229: /* cmd ::= PRAGMA nm dbnm */ {sqlite3Pragma(pParse,&yymsp[-1].minor.yy0,&yymsp[0].minor.yy0,0,0);} break; - case 221: /* cmd ::= PRAGMA nm dbnm EQ nmnum */ + case 230: /* cmd ::= PRAGMA nm dbnm EQ nmnum */ {sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,0);} break; - case 222: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */ + case 231: /* cmd ::= PRAGMA nm dbnm LP nmnum RP */ {sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,0);} break; - case 223: /* cmd ::= PRAGMA nm dbnm EQ minus_num */ + case 232: /* cmd ::= PRAGMA nm dbnm EQ minus_num */ {sqlite3Pragma(pParse,&yymsp[-3].minor.yy0,&yymsp[-2].minor.yy0,&yymsp[0].minor.yy0,1);} break; - case 224: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */ + case 233: /* cmd ::= PRAGMA nm dbnm LP minus_num RP */ {sqlite3Pragma(pParse,&yymsp[-4].minor.yy0,&yymsp[-3].minor.yy0,&yymsp[-1].minor.yy0,1);} break; - case 227: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ + case 236: /* cmd ::= createkw trigger_decl BEGIN trigger_cmd_list END */ { Token all; all.z = yymsp[-3].minor.yy0.z; all.n = (int)(yymsp[0].minor.yy0.z - yymsp[-3].minor.yy0.z) + yymsp[0].minor.yy0.n; - sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy145, &all); + sqlite3FinishTrigger(pParse, yymsp[-1].minor.yy47, &all); } break; - case 228: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ + case 237: /* trigger_decl ::= temp TRIGGER ifnotexists nm dbnm trigger_time trigger_event ON fullname foreach_clause when_clause */ { - sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy194, yymsp[-4].minor.yy332.a, yymsp[-4].minor.yy332.b, yymsp[-2].minor.yy185, yymsp[0].minor.yy72, yymsp[-10].minor.yy194, yymsp[-8].minor.yy194); + sqlite3BeginTrigger(pParse, &yymsp[-7].minor.yy0, &yymsp[-6].minor.yy0, yymsp[-5].minor.yy502, yymsp[-4].minor.yy300.a, yymsp[-4].minor.yy300.b, yymsp[-2].minor.yy427, yymsp[0].minor.yy182, yymsp[-10].minor.yy502, yymsp[-8].minor.yy502); yymsp[-10].minor.yy0 = (yymsp[-6].minor.yy0.n==0?yymsp[-7].minor.yy0:yymsp[-6].minor.yy0); /*A-overwrites-T*/ } break; - case 229: /* trigger_time ::= BEFORE */ -{ yymsp[0].minor.yy194 = TK_BEFORE; } + case 238: /* trigger_time ::= BEFORE|AFTER */ +{ yymsp[0].minor.yy502 = yymsp[0].major; /*A-overwrites-X*/ } break; - case 230: /* trigger_time ::= AFTER */ -{ yymsp[0].minor.yy194 = TK_AFTER; } + case 239: /* trigger_time ::= INSTEAD OF */ +{ yymsp[-1].minor.yy502 = TK_INSTEAD;} break; - case 231: /* trigger_time ::= INSTEAD OF */ -{ yymsp[-1].minor.yy194 = TK_INSTEAD;} + case 240: /* trigger_time ::= */ +{ yymsp[1].minor.yy502 = TK_BEFORE; } break; - case 232: /* trigger_time ::= */ -{ yymsp[1].minor.yy194 = TK_BEFORE; } + case 241: /* trigger_event ::= DELETE|INSERT */ + case 242: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==242); +{yymsp[0].minor.yy300.a = yymsp[0].major; /*A-overwrites-X*/ yymsp[0].minor.yy300.b = 0;} break; - case 233: /* trigger_event ::= DELETE|INSERT */ - case 234: /* trigger_event ::= UPDATE */ yytestcase(yyruleno==234); -{yymsp[0].minor.yy332.a = yymsp[0].major; /*A-overwrites-X*/ yymsp[0].minor.yy332.b = 0;} + case 243: /* trigger_event ::= UPDATE OF idlist */ +{yymsp[-2].minor.yy300.a = TK_UPDATE; yymsp[-2].minor.yy300.b = yymsp[0].minor.yy510;} break; - case 235: /* trigger_event ::= UPDATE OF idlist */ -{yymsp[-2].minor.yy332.a = TK_UPDATE; yymsp[-2].minor.yy332.b = yymsp[0].minor.yy254;} + case 244: /* when_clause ::= */ + case 263: /* key_opt ::= */ yytestcase(yyruleno==263); +{ yymsp[1].minor.yy182 = 0; } break; - case 236: /* when_clause ::= */ - case 255: /* key_opt ::= */ yytestcase(yyruleno==255); -{ yymsp[1].minor.yy72 = 0; } + case 245: /* when_clause ::= WHEN expr */ + case 264: /* key_opt ::= KEY expr */ yytestcase(yyruleno==264); +{ yymsp[-1].minor.yy182 = yymsp[0].minor.yy182; } break; - case 237: /* when_clause ::= WHEN expr */ - case 256: /* key_opt ::= KEY expr */ yytestcase(yyruleno==256); -{ yymsp[-1].minor.yy72 = yymsp[0].minor.yy190.pExpr; } - break; - case 238: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ + case 246: /* trigger_cmd_list ::= trigger_cmd_list trigger_cmd SEMI */ { - assert( yymsp[-2].minor.yy145!=0 ); - yymsp[-2].minor.yy145->pLast->pNext = yymsp[-1].minor.yy145; - yymsp[-2].minor.yy145->pLast = yymsp[-1].minor.yy145; + assert( yymsp[-2].minor.yy47!=0 ); + yymsp[-2].minor.yy47->pLast->pNext = yymsp[-1].minor.yy47; + yymsp[-2].minor.yy47->pLast = yymsp[-1].minor.yy47; } break; - case 239: /* trigger_cmd_list ::= trigger_cmd SEMI */ + case 247: /* trigger_cmd_list ::= trigger_cmd SEMI */ { - assert( yymsp[-1].minor.yy145!=0 ); - yymsp[-1].minor.yy145->pLast = yymsp[-1].minor.yy145; + assert( yymsp[-1].minor.yy47!=0 ); + yymsp[-1].minor.yy47->pLast = yymsp[-1].minor.yy47; } break; - case 240: /* trnm ::= nm DOT nm */ + case 248: /* trnm ::= nm DOT nm */ { yymsp[-2].minor.yy0 = yymsp[0].minor.yy0; sqlite3ErrorMsg(pParse, @@ -137637,216 +144986,217 @@ static void yy_reduce( "statements within triggers"); } break; - case 241: /* tridxby ::= INDEXED BY nm */ + case 249: /* tridxby ::= INDEXED BY nm */ { sqlite3ErrorMsg(pParse, "the INDEXED BY clause is not allowed on UPDATE or DELETE statements " "within triggers"); } break; - case 242: /* tridxby ::= NOT INDEXED */ + case 250: /* tridxby ::= NOT INDEXED */ { sqlite3ErrorMsg(pParse, "the NOT INDEXED clause is not allowed on UPDATE or DELETE statements " "within triggers"); } break; - case 243: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt */ -{yymsp[-6].minor.yy145 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-4].minor.yy0, yymsp[-1].minor.yy148, yymsp[0].minor.yy72, yymsp[-5].minor.yy194);} + case 251: /* trigger_cmd ::= UPDATE orconf trnm tridxby SET setlist where_opt scanpt */ +{yylhsminor.yy47 = sqlite3TriggerUpdateStep(pParse->db, &yymsp[-5].minor.yy0, yymsp[-2].minor.yy232, yymsp[-1].minor.yy182, yymsp[-6].minor.yy502, yymsp[-7].minor.yy0.z, yymsp[0].minor.yy36);} + yymsp[-7].minor.yy47 = yylhsminor.yy47; break; - case 244: /* trigger_cmd ::= insert_cmd INTO trnm idlist_opt select */ -{yymsp[-4].minor.yy145 = sqlite3TriggerInsertStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[-1].minor.yy254, yymsp[0].minor.yy243, yymsp[-4].minor.yy194);/*A-overwrites-R*/} + case 252: /* trigger_cmd ::= scanpt insert_cmd INTO trnm idlist_opt select upsert scanpt */ +{ + yylhsminor.yy47 = sqlite3TriggerInsertStep(pParse->db,&yymsp[-4].minor.yy0,yymsp[-3].minor.yy510,yymsp[-2].minor.yy399,yymsp[-6].minor.yy502,yymsp[-1].minor.yy198,yymsp[-7].minor.yy36,yymsp[0].minor.yy36);/*yylhsminor.yy47-overwrites-yymsp[-6].minor.yy502*/ +} + yymsp[-7].minor.yy47 = yylhsminor.yy47; break; - case 245: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt */ -{yymsp[-4].minor.yy145 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-2].minor.yy0, yymsp[0].minor.yy72);} + case 253: /* trigger_cmd ::= DELETE FROM trnm tridxby where_opt scanpt */ +{yylhsminor.yy47 = sqlite3TriggerDeleteStep(pParse->db, &yymsp[-3].minor.yy0, yymsp[-1].minor.yy182, yymsp[-5].minor.yy0.z, yymsp[0].minor.yy36);} + yymsp[-5].minor.yy47 = yylhsminor.yy47; break; - case 246: /* trigger_cmd ::= select */ -{yymsp[0].minor.yy145 = sqlite3TriggerSelectStep(pParse->db, yymsp[0].minor.yy243); /*A-overwrites-X*/} + case 254: /* trigger_cmd ::= scanpt select scanpt */ +{yylhsminor.yy47 = sqlite3TriggerSelectStep(pParse->db, yymsp[-1].minor.yy399, yymsp[-2].minor.yy36, yymsp[0].minor.yy36); /*yylhsminor.yy47-overwrites-yymsp[-1].minor.yy399*/} + yymsp[-2].minor.yy47 = yylhsminor.yy47; break; - case 247: /* expr ::= RAISE LP IGNORE RP */ + case 255: /* expr ::= RAISE LP IGNORE RP */ { - spanSet(&yymsp[-3].minor.yy190,&yymsp[-3].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-3].minor.yy190.pExpr = sqlite3PExpr(pParse, TK_RAISE, 0, 0); - if( yymsp[-3].minor.yy190.pExpr ){ - yymsp[-3].minor.yy190.pExpr->affinity = OE_Ignore; + yymsp[-3].minor.yy182 = sqlite3PExpr(pParse, TK_RAISE, 0, 0); + if( yymsp[-3].minor.yy182 ){ + yymsp[-3].minor.yy182->affinity = OE_Ignore; } } break; - case 248: /* expr ::= RAISE LP raisetype COMMA nm RP */ + case 256: /* expr ::= RAISE LP raisetype COMMA nm RP */ { - spanSet(&yymsp[-5].minor.yy190,&yymsp[-5].minor.yy0,&yymsp[0].minor.yy0); /*A-overwrites-X*/ - yymsp[-5].minor.yy190.pExpr = sqlite3ExprAlloc(pParse->db, TK_RAISE, &yymsp[-1].minor.yy0, 1); - if( yymsp[-5].minor.yy190.pExpr ) { - yymsp[-5].minor.yy190.pExpr->affinity = (char)yymsp[-3].minor.yy194; + yymsp[-5].minor.yy182 = sqlite3ExprAlloc(pParse->db, TK_RAISE, &yymsp[-1].minor.yy0, 1); + if( yymsp[-5].minor.yy182 ) { + yymsp[-5].minor.yy182->affinity = (char)yymsp[-3].minor.yy502; } } break; - case 249: /* raisetype ::= ROLLBACK */ -{yymsp[0].minor.yy194 = OE_Rollback;} + case 257: /* raisetype ::= ROLLBACK */ +{yymsp[0].minor.yy502 = OE_Rollback;} break; - case 251: /* raisetype ::= FAIL */ -{yymsp[0].minor.yy194 = OE_Fail;} + case 259: /* raisetype ::= FAIL */ +{yymsp[0].minor.yy502 = OE_Fail;} break; - case 252: /* cmd ::= DROP TRIGGER ifexists fullname */ + case 260: /* cmd ::= DROP TRIGGER ifexists fullname */ { - sqlite3DropTrigger(pParse,yymsp[0].minor.yy185,yymsp[-1].minor.yy194); + sqlite3DropTrigger(pParse,yymsp[0].minor.yy427,yymsp[-1].minor.yy502); } break; - case 253: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ + case 261: /* cmd ::= ATTACH database_kw_opt expr AS expr key_opt */ { - sqlite3Attach(pParse, yymsp[-3].minor.yy190.pExpr, yymsp[-1].minor.yy190.pExpr, yymsp[0].minor.yy72); + sqlite3Attach(pParse, yymsp[-3].minor.yy182, yymsp[-1].minor.yy182, yymsp[0].minor.yy182); } break; - case 254: /* cmd ::= DETACH database_kw_opt expr */ + case 262: /* cmd ::= DETACH database_kw_opt expr */ { - sqlite3Detach(pParse, yymsp[0].minor.yy190.pExpr); + sqlite3Detach(pParse, yymsp[0].minor.yy182); } break; - case 257: /* cmd ::= REINDEX */ + case 265: /* cmd ::= REINDEX */ {sqlite3Reindex(pParse, 0, 0);} break; - case 258: /* cmd ::= REINDEX nm dbnm */ + case 266: /* cmd ::= REINDEX nm dbnm */ {sqlite3Reindex(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} break; - case 259: /* cmd ::= ANALYZE */ + case 267: /* cmd ::= ANALYZE */ {sqlite3Analyze(pParse, 0, 0);} break; - case 260: /* cmd ::= ANALYZE nm dbnm */ + case 268: /* cmd ::= ANALYZE nm dbnm */ {sqlite3Analyze(pParse, &yymsp[-1].minor.yy0, &yymsp[0].minor.yy0);} break; - case 261: /* cmd ::= ALTER TABLE fullname RENAME TO nm */ + case 269: /* cmd ::= ALTER TABLE fullname RENAME TO nm */ { - sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy185,&yymsp[0].minor.yy0); + sqlite3AlterRenameTable(pParse,yymsp[-3].minor.yy427,&yymsp[0].minor.yy0); } break; - case 262: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */ + case 270: /* cmd ::= ALTER TABLE add_column_fullname ADD kwcolumn_opt columnname carglist */ { yymsp[-1].minor.yy0.n = (int)(pParse->sLastToken.z-yymsp[-1].minor.yy0.z) + pParse->sLastToken.n; sqlite3AlterFinishAddColumn(pParse, &yymsp[-1].minor.yy0); } break; - case 263: /* add_column_fullname ::= fullname */ + case 271: /* add_column_fullname ::= fullname */ { disableLookaside(pParse); - sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy185); + sqlite3AlterBeginAddColumn(pParse, yymsp[0].minor.yy427); } break; - case 264: /* cmd ::= create_vtab */ + case 272: /* cmd ::= create_vtab */ {sqlite3VtabFinishParse(pParse,0);} break; - case 265: /* cmd ::= create_vtab LP vtabarglist RP */ + case 273: /* cmd ::= create_vtab LP vtabarglist RP */ {sqlite3VtabFinishParse(pParse,&yymsp[0].minor.yy0);} break; - case 266: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */ + case 274: /* create_vtab ::= createkw VIRTUAL TABLE ifnotexists nm dbnm USING nm */ { - sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy194); + sqlite3VtabBeginParse(pParse, &yymsp[-3].minor.yy0, &yymsp[-2].minor.yy0, &yymsp[0].minor.yy0, yymsp[-4].minor.yy502); } break; - case 267: /* vtabarg ::= */ + case 275: /* vtabarg ::= */ {sqlite3VtabArgInit(pParse);} break; - case 268: /* vtabargtoken ::= ANY */ - case 269: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==269); - case 270: /* lp ::= LP */ yytestcase(yyruleno==270); + case 276: /* vtabargtoken ::= ANY */ + case 277: /* vtabargtoken ::= lp anylist RP */ yytestcase(yyruleno==277); + case 278: /* lp ::= LP */ yytestcase(yyruleno==278); {sqlite3VtabArgExtend(pParse,&yymsp[0].minor.yy0);} break; - case 271: /* with ::= */ -{yymsp[1].minor.yy285 = 0;} - break; - case 272: /* with ::= WITH wqlist */ -{ yymsp[-1].minor.yy285 = yymsp[0].minor.yy285; } + case 279: /* with ::= WITH wqlist */ + case 280: /* with ::= WITH RECURSIVE wqlist */ yytestcase(yyruleno==280); +{ sqlite3WithPush(pParse, yymsp[0].minor.yy91, 1); } break; - case 273: /* with ::= WITH RECURSIVE wqlist */ -{ yymsp[-2].minor.yy285 = yymsp[0].minor.yy285; } - break; - case 274: /* wqlist ::= nm eidlist_opt AS LP select RP */ + case 281: /* wqlist ::= nm eidlist_opt AS LP select RP */ { - yymsp[-5].minor.yy285 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy148, yymsp[-1].minor.yy243); /*A-overwrites-X*/ + yymsp[-5].minor.yy91 = sqlite3WithAdd(pParse, 0, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy232, yymsp[-1].minor.yy399); /*A-overwrites-X*/ } break; - case 275: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */ + case 282: /* wqlist ::= wqlist COMMA nm eidlist_opt AS LP select RP */ { - yymsp[-7].minor.yy285 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy285, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy148, yymsp[-1].minor.yy243); + yymsp[-7].minor.yy91 = sqlite3WithAdd(pParse, yymsp[-7].minor.yy91, &yymsp[-5].minor.yy0, yymsp[-4].minor.yy232, yymsp[-1].minor.yy399); } break; default: - /* (276) input ::= cmdlist */ yytestcase(yyruleno==276); - /* (277) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==277); - /* (278) cmdlist ::= ecmd (OPTIMIZED OUT) */ assert(yyruleno!=278); - /* (279) ecmd ::= SEMI */ yytestcase(yyruleno==279); - /* (280) ecmd ::= explain cmdx SEMI */ yytestcase(yyruleno==280); - /* (281) explain ::= */ yytestcase(yyruleno==281); - /* (282) trans_opt ::= */ yytestcase(yyruleno==282); - /* (283) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==283); - /* (284) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==284); - /* (285) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==285); - /* (286) savepoint_opt ::= */ yytestcase(yyruleno==286); - /* (287) cmd ::= create_table create_table_args */ yytestcase(yyruleno==287); - /* (288) columnlist ::= columnlist COMMA columnname carglist */ yytestcase(yyruleno==288); - /* (289) columnlist ::= columnname carglist */ yytestcase(yyruleno==289); - /* (290) nm ::= ID|INDEXED */ yytestcase(yyruleno==290); - /* (291) nm ::= STRING */ yytestcase(yyruleno==291); - /* (292) nm ::= JOIN_KW */ yytestcase(yyruleno==292); - /* (293) typetoken ::= typename */ yytestcase(yyruleno==293); - /* (294) typename ::= ID|STRING */ yytestcase(yyruleno==294); - /* (295) signed ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=295); - /* (296) signed ::= minus_num (OPTIMIZED OUT) */ assert(yyruleno!=296); - /* (297) carglist ::= carglist ccons */ yytestcase(yyruleno==297); - /* (298) carglist ::= */ yytestcase(yyruleno==298); - /* (299) ccons ::= NULL onconf */ yytestcase(yyruleno==299); - /* (300) conslist_opt ::= COMMA conslist */ yytestcase(yyruleno==300); - /* (301) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==301); - /* (302) conslist ::= tcons (OPTIMIZED OUT) */ assert(yyruleno!=302); - /* (303) tconscomma ::= */ yytestcase(yyruleno==303); - /* (304) defer_subclause_opt ::= defer_subclause (OPTIMIZED OUT) */ assert(yyruleno!=304); - /* (305) resolvetype ::= raisetype (OPTIMIZED OUT) */ assert(yyruleno!=305); - /* (306) selectnowith ::= oneselect (OPTIMIZED OUT) */ assert(yyruleno!=306); - /* (307) oneselect ::= values */ yytestcase(yyruleno==307); - /* (308) sclp ::= selcollist COMMA */ yytestcase(yyruleno==308); - /* (309) as ::= ID|STRING */ yytestcase(yyruleno==309); - /* (310) expr ::= term (OPTIMIZED OUT) */ assert(yyruleno!=310); - /* (311) exprlist ::= nexprlist */ yytestcase(yyruleno==311); - /* (312) nmnum ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=312); - /* (313) nmnum ::= nm (OPTIMIZED OUT) */ assert(yyruleno!=313); - /* (314) nmnum ::= ON */ yytestcase(yyruleno==314); - /* (315) nmnum ::= DELETE */ yytestcase(yyruleno==315); - /* (316) nmnum ::= DEFAULT */ yytestcase(yyruleno==316); - /* (317) plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==317); - /* (318) foreach_clause ::= */ yytestcase(yyruleno==318); - /* (319) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==319); - /* (320) trnm ::= nm */ yytestcase(yyruleno==320); - /* (321) tridxby ::= */ yytestcase(yyruleno==321); - /* (322) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==322); - /* (323) database_kw_opt ::= */ yytestcase(yyruleno==323); - /* (324) kwcolumn_opt ::= */ yytestcase(yyruleno==324); - /* (325) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==325); - /* (326) vtabarglist ::= vtabarg */ yytestcase(yyruleno==326); - /* (327) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==327); - /* (328) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==328); - /* (329) anylist ::= */ yytestcase(yyruleno==329); - /* (330) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==330); - /* (331) anylist ::= anylist ANY */ yytestcase(yyruleno==331); + /* (283) input ::= cmdlist */ yytestcase(yyruleno==283); + /* (284) cmdlist ::= cmdlist ecmd */ yytestcase(yyruleno==284); + /* (285) cmdlist ::= ecmd (OPTIMIZED OUT) */ assert(yyruleno!=285); + /* (286) ecmd ::= SEMI */ yytestcase(yyruleno==286); + /* (287) ecmd ::= cmdx SEMI */ yytestcase(yyruleno==287); + /* (288) ecmd ::= explain cmdx */ yytestcase(yyruleno==288); + /* (289) trans_opt ::= */ yytestcase(yyruleno==289); + /* (290) trans_opt ::= TRANSACTION */ yytestcase(yyruleno==290); + /* (291) trans_opt ::= TRANSACTION nm */ yytestcase(yyruleno==291); + /* (292) savepoint_opt ::= SAVEPOINT */ yytestcase(yyruleno==292); + /* (293) savepoint_opt ::= */ yytestcase(yyruleno==293); + /* (294) cmd ::= create_table create_table_args */ yytestcase(yyruleno==294); + /* (295) columnlist ::= columnlist COMMA columnname carglist */ yytestcase(yyruleno==295); + /* (296) columnlist ::= columnname carglist */ yytestcase(yyruleno==296); + /* (297) nm ::= ID|INDEXED */ yytestcase(yyruleno==297); + /* (298) nm ::= STRING */ yytestcase(yyruleno==298); + /* (299) nm ::= JOIN_KW */ yytestcase(yyruleno==299); + /* (300) typetoken ::= typename */ yytestcase(yyruleno==300); + /* (301) typename ::= ID|STRING */ yytestcase(yyruleno==301); + /* (302) signed ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=302); + /* (303) signed ::= minus_num (OPTIMIZED OUT) */ assert(yyruleno!=303); + /* (304) carglist ::= carglist ccons */ yytestcase(yyruleno==304); + /* (305) carglist ::= */ yytestcase(yyruleno==305); + /* (306) ccons ::= NULL onconf */ yytestcase(yyruleno==306); + /* (307) conslist_opt ::= COMMA conslist */ yytestcase(yyruleno==307); + /* (308) conslist ::= conslist tconscomma tcons */ yytestcase(yyruleno==308); + /* (309) conslist ::= tcons (OPTIMIZED OUT) */ assert(yyruleno!=309); + /* (310) tconscomma ::= */ yytestcase(yyruleno==310); + /* (311) defer_subclause_opt ::= defer_subclause (OPTIMIZED OUT) */ assert(yyruleno!=311); + /* (312) resolvetype ::= raisetype (OPTIMIZED OUT) */ assert(yyruleno!=312); + /* (313) selectnowith ::= oneselect (OPTIMIZED OUT) */ assert(yyruleno!=313); + /* (314) oneselect ::= values */ yytestcase(yyruleno==314); + /* (315) sclp ::= selcollist COMMA */ yytestcase(yyruleno==315); + /* (316) as ::= ID|STRING */ yytestcase(yyruleno==316); + /* (317) expr ::= term (OPTIMIZED OUT) */ assert(yyruleno!=317); + /* (318) likeop ::= LIKE_KW|MATCH */ yytestcase(yyruleno==318); + /* (319) exprlist ::= nexprlist */ yytestcase(yyruleno==319); + /* (320) nmnum ::= plus_num (OPTIMIZED OUT) */ assert(yyruleno!=320); + /* (321) nmnum ::= nm (OPTIMIZED OUT) */ assert(yyruleno!=321); + /* (322) nmnum ::= ON */ yytestcase(yyruleno==322); + /* (323) nmnum ::= DELETE */ yytestcase(yyruleno==323); + /* (324) nmnum ::= DEFAULT */ yytestcase(yyruleno==324); + /* (325) plus_num ::= INTEGER|FLOAT */ yytestcase(yyruleno==325); + /* (326) foreach_clause ::= */ yytestcase(yyruleno==326); + /* (327) foreach_clause ::= FOR EACH ROW */ yytestcase(yyruleno==327); + /* (328) trnm ::= nm */ yytestcase(yyruleno==328); + /* (329) tridxby ::= */ yytestcase(yyruleno==329); + /* (330) database_kw_opt ::= DATABASE */ yytestcase(yyruleno==330); + /* (331) database_kw_opt ::= */ yytestcase(yyruleno==331); + /* (332) kwcolumn_opt ::= */ yytestcase(yyruleno==332); + /* (333) kwcolumn_opt ::= COLUMNKW */ yytestcase(yyruleno==333); + /* (334) vtabarglist ::= vtabarg */ yytestcase(yyruleno==334); + /* (335) vtabarglist ::= vtabarglist COMMA vtabarg */ yytestcase(yyruleno==335); + /* (336) vtabarg ::= vtabarg vtabargtoken */ yytestcase(yyruleno==336); + /* (337) anylist ::= */ yytestcase(yyruleno==337); + /* (338) anylist ::= anylist LP anylist RP */ yytestcase(yyruleno==338); + /* (339) anylist ::= anylist ANY */ yytestcase(yyruleno==339); + /* (340) with ::= */ yytestcase(yyruleno==340); break; /********** End reduce actions ************************************************/ }; assert( yyruleno<sizeof(yyRuleInfo)/sizeof(yyRuleInfo[0]) ); yygoto = yyRuleInfo[yyruleno].lhs; yysize = yyRuleInfo[yyruleno].nrhs; - yyact = yy_find_reduce_action(yymsp[-yysize].stateno,(YYCODETYPE)yygoto); - if( yyact <= YY_MAX_SHIFTREDUCE ){ - if( yyact>YY_MAX_SHIFT ){ - yyact += YY_MIN_REDUCE - YY_MIN_SHIFTREDUCE; - } - yymsp -= yysize-1; - yypParser->yytos = yymsp; - yymsp->stateno = (YYACTIONTYPE)yyact; - yymsp->major = (YYCODETYPE)yygoto; - yyTraceShift(yypParser, yyact); - }else{ - assert( yyact == YY_ACCEPT_ACTION ); - yypParser->yytos -= yysize; - yy_accept(yypParser); - } + yyact = yy_find_reduce_action(yymsp[yysize].stateno,(YYCODETYPE)yygoto); + + /* There are no SHIFTREDUCE actions on nonterminals because the table + ** generator has simplified them to pure REDUCE actions. */ + assert( !(yyact>YY_MAX_SHIFT && yyact<=YY_MAX_SHIFTREDUCE) ); + + /* It is not possible for a REDUCE to be followed by an error */ + assert( yyact!=YY_ERROR_ACTION ); + + yymsp += yysize+1; + yypParser->yytos = yymsp; + yymsp->stateno = (YYACTIONTYPE)yyact; + yymsp->major = (YYCODETYPE)yygoto; + yyTraceShift(yypParser, yyact, "... then shift"); + return yyact; } /* @@ -137856,7 +145206,8 @@ static void yy_reduce( static void yy_parse_failed( yyParser *yypParser /* The parser */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #ifndef NDEBUG if( yyTraceFILE ){ fprintf(yyTraceFILE,"%sFail!\n",yyTracePrompt); @@ -137867,7 +145218,8 @@ static void yy_parse_failed( ** parser fails */ /************ Begin %parse_failure code ***************************************/ /************ End %parse_failure code *****************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserCTX_STORE } #endif /* YYNOERRORRECOVERY */ @@ -137879,15 +145231,20 @@ static void yy_syntax_error( int yymajor, /* The major type of the error token */ sqlite3ParserTOKENTYPE yyminor /* The minor type of the error token */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #define TOKEN yyminor /************ Begin %syntax_error code ****************************************/ UNUSED_PARAMETER(yymajor); /* Silence some compiler warnings */ - assert( TOKEN.z[0] ); /* The tokenizer always gives us a token */ - sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN); + if( TOKEN.z[0] ){ + sqlite3ErrorMsg(pParse, "near \"%T\": syntax error", &TOKEN); + }else{ + sqlite3ErrorMsg(pParse, "incomplete input"); + } /************ End %syntax_error code ******************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserCTX_STORE } /* @@ -137896,7 +145253,8 @@ static void yy_syntax_error( static void yy_accept( yyParser *yypParser /* The parser */ ){ - sqlite3ParserARG_FETCH; + sqlite3ParserARG_FETCH + sqlite3ParserCTX_FETCH #ifndef NDEBUG if( yyTraceFILE ){ fprintf(yyTraceFILE,"%sAccept!\n",yyTracePrompt); @@ -137910,7 +145268,8 @@ static void yy_accept( ** parser accepts */ /*********** Begin %parse_accept code *****************************************/ /*********** End %parse_accept code *******************************************/ - sqlite3ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3ParserCTX_STORE } /* The main parser program. @@ -137939,38 +145298,51 @@ SQLITE_PRIVATE void sqlite3Parser( sqlite3ParserARG_PDECL /* Optional %extra_argument parameter */ ){ YYMINORTYPE yyminorunion; - unsigned int yyact; /* The parser action. */ + YYACTIONTYPE yyact; /* The parser action. */ #if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY) int yyendofinput; /* True if we are at the end of input */ #endif #ifdef YYERRORSYMBOL int yyerrorhit = 0; /* True if yymajor has invoked an error */ #endif - yyParser *yypParser; /* The parser */ + yyParser *yypParser = (yyParser*)yyp; /* The parser */ + sqlite3ParserCTX_FETCH + sqlite3ParserARG_STORE - yypParser = (yyParser*)yyp; assert( yypParser->yytos!=0 ); #if !defined(YYERRORSYMBOL) && !defined(YYNOERRORRECOVERY) yyendofinput = (yymajor==0); #endif - sqlite3ParserARG_STORE; + yyact = yypParser->yytos->stateno; #ifndef NDEBUG if( yyTraceFILE ){ - fprintf(yyTraceFILE,"%sInput '%s'\n",yyTracePrompt,yyTokenName[yymajor]); + if( yyact < YY_MIN_REDUCE ){ + fprintf(yyTraceFILE,"%sInput '%s' in state %d\n", + yyTracePrompt,yyTokenName[yymajor],yyact); + }else{ + fprintf(yyTraceFILE,"%sInput '%s' with pending reduce %d\n", + yyTracePrompt,yyTokenName[yymajor],yyact-YY_MIN_REDUCE); + } } #endif do{ - yyact = yy_find_shift_action(yypParser,(YYCODETYPE)yymajor); - if( yyact <= YY_MAX_SHIFTREDUCE ){ + assert( yyact==yypParser->yytos->stateno ); + yyact = yy_find_shift_action(yymajor,yyact); + if( yyact >= YY_MIN_REDUCE ){ + yyact = yy_reduce(yypParser,yyact-YY_MIN_REDUCE,yymajor, + yyminor sqlite3ParserCTX_PARAM); + }else if( yyact <= YY_MAX_SHIFTREDUCE ){ yy_shift(yypParser,yyact,yymajor,yyminor); #ifndef YYNOERRORRECOVERY yypParser->yyerrcnt--; #endif - yymajor = YYNOCODE; - }else if( yyact <= YY_MAX_REDUCE ){ - yy_reduce(yypParser,yyact-YY_MIN_REDUCE); + break; + }else if( yyact==YY_ACCEPT_ACTION ){ + yypParser->yytos--; + yy_accept(yypParser); + return; }else{ assert( yyact == YY_ERROR_ACTION ); yyminorunion.yy0 = yyminor; @@ -138037,6 +145409,8 @@ SQLITE_PRIVATE void sqlite3Parser( } yypParser->yyerrcnt = 3; yyerrorhit = 1; + if( yymajor==YYNOCODE ) break; + yyact = yypParser->yytos->stateno; #elif defined(YYNOERRORRECOVERY) /* If the YYNOERRORRECOVERY macro is defined, then do not attempt to ** do any kind of error recovery. Instead, simply invoke the syntax @@ -138047,8 +145421,7 @@ SQLITE_PRIVATE void sqlite3Parser( */ yy_syntax_error(yypParser,yymajor, yyminor); yy_destructor(yypParser,(YYCODETYPE)yymajor,&yyminorunion); - yymajor = YYNOCODE; - + break; #else /* YYERRORSYMBOL is not defined */ /* This is what we do if the grammar does not define ERROR: ** @@ -138070,10 +145443,10 @@ SQLITE_PRIVATE void sqlite3Parser( yypParser->yyerrcnt = -1; #endif } - yymajor = YYNOCODE; + break; #endif } - }while( yymajor!=YYNOCODE && yypParser->yytos>yypParser->yystack ); + }while( yypParser->yytos>yypParser->yystack ); #ifndef NDEBUG if( yyTraceFILE ){ yyStackEntry *i; @@ -138250,135 +145623,148 @@ const unsigned char ebcdicToAscii[] = { ** is substantially reduced. This is important for embedded applications ** on platforms with limited memory. */ -/* Hash score: 182 */ +/* Hash score: 185 */ +/* zKWText[] encodes 845 bytes of keyword text in 561 bytes */ +/* REINDEXEDESCAPEACHECKEYBEFOREIGNOREGEXPLAINSTEADDATABASELECT */ +/* ABLEFTHENDEFERRABLELSEXCEPTRANSACTIONATURALTERAISEXCLUSIVE */ +/* XISTSAVEPOINTERSECTRIGGEREFERENCESCONSTRAINTOFFSETEMPORARY */ +/* UNIQUERYWITHOUTERELEASEATTACHAVINGROUPDATEBEGINNERECURSIVE */ +/* BETWEENOTHINGLOBYCASCADELETECASECOLLATECREATECURRENT_DATE */ +/* DETACHIMMEDIATEJOINSERTLIKEMATCHPLANALYZEPRAGMABORTVALUES */ +/* VIRTUALIMITWHENOTNULLWHERENAMEAFTEREPLACEANDEFAULT */ +/* AUTOINCREMENTCASTCOLUMNCOMMITCONFLICTCROSSCURRENT_TIMESTAMP */ +/* RIMARYDEFERREDISTINCTDORDERESTRICTDROPFAILFROMFULLIFISNULL */ +/* RIGHTROLLBACKROWUNIONUSINGVACUUMVIEWINITIALLY */ +static const char zKWText[560] = { + 'R','E','I','N','D','E','X','E','D','E','S','C','A','P','E','A','C','H', + 'E','C','K','E','Y','B','E','F','O','R','E','I','G','N','O','R','E','G', + 'E','X','P','L','A','I','N','S','T','E','A','D','D','A','T','A','B','A', + 'S','E','L','E','C','T','A','B','L','E','F','T','H','E','N','D','E','F', + 'E','R','R','A','B','L','E','L','S','E','X','C','E','P','T','R','A','N', + 'S','A','C','T','I','O','N','A','T','U','R','A','L','T','E','R','A','I', + 'S','E','X','C','L','U','S','I','V','E','X','I','S','T','S','A','V','E', + 'P','O','I','N','T','E','R','S','E','C','T','R','I','G','G','E','R','E', + 'F','E','R','E','N','C','E','S','C','O','N','S','T','R','A','I','N','T', + 'O','F','F','S','E','T','E','M','P','O','R','A','R','Y','U','N','I','Q', + 'U','E','R','Y','W','I','T','H','O','U','T','E','R','E','L','E','A','S', + 'E','A','T','T','A','C','H','A','V','I','N','G','R','O','U','P','D','A', + 'T','E','B','E','G','I','N','N','E','R','E','C','U','R','S','I','V','E', + 'B','E','T','W','E','E','N','O','T','H','I','N','G','L','O','B','Y','C', + 'A','S','C','A','D','E','L','E','T','E','C','A','S','E','C','O','L','L', + 'A','T','E','C','R','E','A','T','E','C','U','R','R','E','N','T','_','D', + 'A','T','E','D','E','T','A','C','H','I','M','M','E','D','I','A','T','E', + 'J','O','I','N','S','E','R','T','L','I','K','E','M','A','T','C','H','P', + 'L','A','N','A','L','Y','Z','E','P','R','A','G','M','A','B','O','R','T', + 'V','A','L','U','E','S','V','I','R','T','U','A','L','I','M','I','T','W', + 'H','E','N','O','T','N','U','L','L','W','H','E','R','E','N','A','M','E', + 'A','F','T','E','R','E','P','L','A','C','E','A','N','D','E','F','A','U', + 'L','T','A','U','T','O','I','N','C','R','E','M','E','N','T','C','A','S', + 'T','C','O','L','U','M','N','C','O','M','M','I','T','C','O','N','F','L', + 'I','C','T','C','R','O','S','S','C','U','R','R','E','N','T','_','T','I', + 'M','E','S','T','A','M','P','R','I','M','A','R','Y','D','E','F','E','R', + 'R','E','D','I','S','T','I','N','C','T','D','O','R','D','E','R','E','S', + 'T','R','I','C','T','D','R','O','P','F','A','I','L','F','R','O','M','F', + 'U','L','L','I','F','I','S','N','U','L','L','R','I','G','H','T','R','O', + 'L','L','B','A','C','K','R','O','W','U','N','I','O','N','U','S','I','N', + 'G','V','A','C','U','U','M','V','I','E','W','I','N','I','T','I','A','L', + 'L','Y', +}; +/* aKWHash[i] is the hash value for the i-th keyword */ +static const unsigned char aKWHash[127] = { + 74, 108, 119, 72, 0, 45, 0, 0, 81, 0, 76, 61, 0, + 42, 12, 77, 15, 0, 118, 84, 54, 116, 0, 19, 0, 0, + 123, 0, 121, 111, 0, 22, 96, 0, 9, 0, 0, 68, 69, + 0, 67, 6, 0, 48, 93, 105, 0, 120, 104, 0, 0, 44, + 0, 106, 24, 0, 17, 0, 124, 53, 23, 0, 5, 62, 25, + 99, 0, 0, 126, 112, 60, 125, 57, 28, 55, 0, 94, 0, + 103, 26, 0, 102, 0, 0, 0, 98, 95, 100, 91, 115, 14, + 39, 114, 0, 80, 0, 109, 92, 90, 32, 0, 122, 79, 117, + 86, 46, 83, 0, 0, 97, 40, 59, 110, 0, 36, 0, 0, + 29, 0, 89, 87, 88, 0, 20, 85, 0, 56, +}; +/* aKWNext[] forms the hash collision chain. If aKWHash[i]==0 +** then the i-th keyword has no more hash collisions. Otherwise, +** the next keyword with the same hash is aKWHash[i]-1. */ +static const unsigned char aKWNext[126] = { + 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, + 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 0, 0, 0, 33, 0, 21, 0, 0, 0, 0, 0, 50, + 0, 43, 3, 47, 0, 0, 0, 0, 0, 0, 0, 0, 0, + 0, 1, 64, 0, 0, 65, 0, 41, 0, 38, 0, 0, 0, + 0, 0, 49, 75, 0, 0, 30, 0, 58, 0, 0, 63, 31, + 52, 16, 34, 10, 0, 0, 0, 0, 0, 0, 0, 11, 70, + 78, 0, 8, 0, 18, 51, 0, 107, 101, 0, 113, 0, 73, + 27, 37, 71, 82, 0, 35, 66, 0, 0, +}; +/* aKWLen[i] is the length (in bytes) of the i-th keyword */ +static const unsigned char aKWLen[126] = { + 7, 7, 5, 4, 6, 4, 5, 3, 6, 7, 3, 6, 6, + 7, 7, 3, 8, 2, 6, 5, 4, 4, 3, 10, 4, 6, + 11, 6, 2, 7, 5, 5, 9, 6, 9, 9, 7, 10, 10, + 4, 6, 2, 3, 9, 4, 2, 6, 5, 7, 4, 5, 7, + 6, 6, 5, 6, 5, 5, 9, 7, 7, 4, 2, 7, 3, + 6, 4, 7, 6, 12, 6, 9, 4, 6, 4, 5, 4, 7, + 6, 5, 6, 7, 5, 4, 7, 3, 2, 4, 5, 6, 5, + 7, 3, 7, 13, 2, 2, 4, 6, 6, 8, 5, 17, 12, + 7, 8, 8, 2, 2, 5, 8, 4, 4, 4, 4, 2, 6, + 5, 8, 3, 5, 5, 6, 4, 9, 3, +}; +/* aKWOffset[i] is the index into zKWText[] of the start of +** the text for the i-th keyword. */ +static const unsigned short int aKWOffset[126] = { + 0, 2, 2, 8, 9, 14, 16, 20, 23, 25, 25, 29, 33, + 36, 41, 46, 48, 53, 54, 59, 62, 65, 67, 69, 78, 81, + 86, 91, 95, 96, 101, 105, 109, 117, 122, 128, 136, 142, 152, + 159, 162, 162, 165, 167, 167, 171, 176, 179, 184, 184, 188, 192, + 199, 204, 209, 212, 218, 221, 225, 234, 240, 246, 249, 251, 252, + 256, 262, 266, 273, 279, 291, 297, 306, 308, 314, 318, 323, 325, + 332, 337, 342, 348, 354, 359, 362, 362, 362, 365, 369, 372, 378, + 382, 389, 391, 398, 400, 402, 411, 415, 421, 427, 435, 440, 440, + 456, 463, 470, 471, 478, 479, 483, 491, 495, 499, 503, 507, 509, + 515, 520, 528, 531, 536, 541, 547, 551, 556, +}; +/* aKWCode[i] is the parser symbol code for the i-th keyword */ +static const unsigned char aKWCode[126] = { + TK_REINDEX, TK_INDEXED, TK_INDEX, TK_DESC, TK_ESCAPE, + TK_EACH, TK_CHECK, TK_KEY, TK_BEFORE, TK_FOREIGN, + TK_FOR, TK_IGNORE, TK_LIKE_KW, TK_EXPLAIN, TK_INSTEAD, + TK_ADD, TK_DATABASE, TK_AS, TK_SELECT, TK_TABLE, + TK_JOIN_KW, TK_THEN, TK_END, TK_DEFERRABLE, TK_ELSE, + TK_EXCEPT, TK_TRANSACTION,TK_ACTION, TK_ON, TK_JOIN_KW, + TK_ALTER, TK_RAISE, TK_EXCLUSIVE, TK_EXISTS, TK_SAVEPOINT, + TK_INTERSECT, TK_TRIGGER, TK_REFERENCES, TK_CONSTRAINT, TK_INTO, + TK_OFFSET, TK_OF, TK_SET, TK_TEMP, TK_TEMP, + TK_OR, TK_UNIQUE, TK_QUERY, TK_WITHOUT, TK_WITH, + TK_JOIN_KW, TK_RELEASE, TK_ATTACH, TK_HAVING, TK_GROUP, + TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RECURSIVE, TK_BETWEEN, + TK_NOTHING, TK_LIKE_KW, TK_BY, TK_CASCADE, TK_ASC, + TK_DELETE, TK_CASE, TK_COLLATE, TK_CREATE, TK_CTIME_KW, + TK_DETACH, TK_IMMEDIATE, TK_JOIN, TK_INSERT, TK_LIKE_KW, + TK_MATCH, TK_PLAN, TK_ANALYZE, TK_PRAGMA, TK_ABORT, + TK_VALUES, TK_VIRTUAL, TK_LIMIT, TK_WHEN, TK_NOTNULL, + TK_NOT, TK_NO, TK_NULL, TK_WHERE, TK_RENAME, + TK_AFTER, TK_REPLACE, TK_AND, TK_DEFAULT, TK_AUTOINCR, + TK_TO, TK_IN, TK_CAST, TK_COLUMNKW, TK_COMMIT, + TK_CONFLICT, TK_JOIN_KW, TK_CTIME_KW, TK_CTIME_KW, TK_PRIMARY, + TK_DEFERRED, TK_DISTINCT, TK_IS, TK_DO, TK_ORDER, + TK_RESTRICT, TK_DROP, TK_FAIL, TK_FROM, TK_JOIN_KW, + TK_IF, TK_ISNULL, TK_JOIN_KW, TK_ROLLBACK, TK_ROW, + TK_UNION, TK_USING, TK_VACUUM, TK_VIEW, TK_INITIALLY, + TK_ALL, +}; +/* Check to see if z[0..n-1] is a keyword. If it is, write the +** parser symbol code for that keyword into *pType. Always +** return the integer n (the length of the token). */ static int keywordCode(const char *z, int n, int *pType){ - /* zText[] encodes 834 bytes of keywords in 554 bytes */ - /* REINDEXEDESCAPEACHECKEYBEFOREIGNOREGEXPLAINSTEADDATABASELECT */ - /* ABLEFTHENDEFERRABLELSEXCEPTRANSACTIONATURALTERAISEXCLUSIVE */ - /* XISTSAVEPOINTERSECTRIGGEREFERENCESCONSTRAINTOFFSETEMPORARY */ - /* UNIQUERYWITHOUTERELEASEATTACHAVINGROUPDATEBEGINNERECURSIVE */ - /* BETWEENOTNULLIKECASCADELETECASECOLLATECREATECURRENT_DATEDETACH */ - /* IMMEDIATEJOINSERTMATCHPLANALYZEPRAGMABORTVALUESVIRTUALIMITWHEN */ - /* WHERENAMEAFTEREPLACEANDEFAULTAUTOINCREMENTCASTCOLUMNCOMMIT */ - /* CONFLICTCROSSCURRENT_TIMESTAMPRIMARYDEFERREDISTINCTDROPFAIL */ - /* FROMFULLGLOBYIFISNULLORDERESTRICTRIGHTROLLBACKROWUNIONUSING */ - /* VACUUMVIEWINITIALLY */ - static const char zText[553] = { - 'R','E','I','N','D','E','X','E','D','E','S','C','A','P','E','A','C','H', - 'E','C','K','E','Y','B','E','F','O','R','E','I','G','N','O','R','E','G', - 'E','X','P','L','A','I','N','S','T','E','A','D','D','A','T','A','B','A', - 'S','E','L','E','C','T','A','B','L','E','F','T','H','E','N','D','E','F', - 'E','R','R','A','B','L','E','L','S','E','X','C','E','P','T','R','A','N', - 'S','A','C','T','I','O','N','A','T','U','R','A','L','T','E','R','A','I', - 'S','E','X','C','L','U','S','I','V','E','X','I','S','T','S','A','V','E', - 'P','O','I','N','T','E','R','S','E','C','T','R','I','G','G','E','R','E', - 'F','E','R','E','N','C','E','S','C','O','N','S','T','R','A','I','N','T', - 'O','F','F','S','E','T','E','M','P','O','R','A','R','Y','U','N','I','Q', - 'U','E','R','Y','W','I','T','H','O','U','T','E','R','E','L','E','A','S', - 'E','A','T','T','A','C','H','A','V','I','N','G','R','O','U','P','D','A', - 'T','E','B','E','G','I','N','N','E','R','E','C','U','R','S','I','V','E', - 'B','E','T','W','E','E','N','O','T','N','U','L','L','I','K','E','C','A', - 'S','C','A','D','E','L','E','T','E','C','A','S','E','C','O','L','L','A', - 'T','E','C','R','E','A','T','E','C','U','R','R','E','N','T','_','D','A', - 'T','E','D','E','T','A','C','H','I','M','M','E','D','I','A','T','E','J', - 'O','I','N','S','E','R','T','M','A','T','C','H','P','L','A','N','A','L', - 'Y','Z','E','P','R','A','G','M','A','B','O','R','T','V','A','L','U','E', - 'S','V','I','R','T','U','A','L','I','M','I','T','W','H','E','N','W','H', - 'E','R','E','N','A','M','E','A','F','T','E','R','E','P','L','A','C','E', - 'A','N','D','E','F','A','U','L','T','A','U','T','O','I','N','C','R','E', - 'M','E','N','T','C','A','S','T','C','O','L','U','M','N','C','O','M','M', - 'I','T','C','O','N','F','L','I','C','T','C','R','O','S','S','C','U','R', - 'R','E','N','T','_','T','I','M','E','S','T','A','M','P','R','I','M','A', - 'R','Y','D','E','F','E','R','R','E','D','I','S','T','I','N','C','T','D', - 'R','O','P','F','A','I','L','F','R','O','M','F','U','L','L','G','L','O', - 'B','Y','I','F','I','S','N','U','L','L','O','R','D','E','R','E','S','T', - 'R','I','C','T','R','I','G','H','T','R','O','L','L','B','A','C','K','R', - 'O','W','U','N','I','O','N','U','S','I','N','G','V','A','C','U','U','M', - 'V','I','E','W','I','N','I','T','I','A','L','L','Y', - }; - static const unsigned char aHash[127] = { - 76, 105, 117, 74, 0, 45, 0, 0, 82, 0, 77, 0, 0, - 42, 12, 78, 15, 0, 116, 85, 54, 112, 0, 19, 0, 0, - 121, 0, 119, 115, 0, 22, 93, 0, 9, 0, 0, 70, 71, - 0, 69, 6, 0, 48, 90, 102, 0, 118, 101, 0, 0, 44, - 0, 103, 24, 0, 17, 0, 122, 53, 23, 0, 5, 110, 25, - 96, 0, 0, 124, 106, 60, 123, 57, 28, 55, 0, 91, 0, - 100, 26, 0, 99, 0, 0, 0, 95, 92, 97, 88, 109, 14, - 39, 108, 0, 81, 0, 18, 89, 111, 32, 0, 120, 80, 113, - 62, 46, 84, 0, 0, 94, 40, 59, 114, 0, 36, 0, 0, - 29, 0, 86, 63, 64, 0, 20, 61, 0, 56, - }; - static const unsigned char aNext[124] = { - 0, 0, 0, 0, 4, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 2, 0, 0, 0, 0, 0, 0, 13, 0, 0, 0, 0, - 0, 7, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, 0, - 0, 0, 0, 0, 33, 0, 21, 0, 0, 0, 0, 0, 50, - 0, 43, 3, 47, 0, 0, 0, 0, 30, 0, 58, 0, 38, - 0, 0, 0, 1, 66, 0, 0, 67, 0, 41, 0, 0, 0, - 0, 0, 0, 49, 65, 0, 0, 0, 0, 31, 52, 16, 34, - 10, 0, 0, 0, 0, 0, 0, 0, 11, 72, 79, 0, 8, - 0, 104, 98, 0, 107, 0, 87, 0, 75, 51, 0, 27, 37, - 73, 83, 0, 35, 68, 0, 0, - }; - static const unsigned char aLen[124] = { - 7, 7, 5, 4, 6, 4, 5, 3, 6, 7, 3, 6, 6, - 7, 7, 3, 8, 2, 6, 5, 4, 4, 3, 10, 4, 6, - 11, 6, 2, 7, 5, 5, 9, 6, 9, 9, 7, 10, 10, - 4, 6, 2, 3, 9, 4, 2, 6, 5, 7, 4, 5, 7, - 6, 6, 5, 6, 5, 5, 9, 7, 7, 3, 2, 4, 4, - 7, 3, 6, 4, 7, 6, 12, 6, 9, 4, 6, 5, 4, - 7, 6, 5, 6, 7, 5, 4, 5, 6, 5, 7, 3, 7, - 13, 2, 2, 4, 6, 6, 8, 5, 17, 12, 7, 8, 8, - 2, 4, 4, 4, 4, 4, 2, 2, 6, 5, 8, 5, 8, - 3, 5, 5, 6, 4, 9, 3, - }; - static const unsigned short int aOffset[124] = { - 0, 2, 2, 8, 9, 14, 16, 20, 23, 25, 25, 29, 33, - 36, 41, 46, 48, 53, 54, 59, 62, 65, 67, 69, 78, 81, - 86, 91, 95, 96, 101, 105, 109, 117, 122, 128, 136, 142, 152, - 159, 162, 162, 165, 167, 167, 171, 176, 179, 184, 184, 188, 192, - 199, 204, 209, 212, 218, 221, 225, 234, 240, 240, 240, 243, 246, - 250, 251, 255, 261, 265, 272, 278, 290, 296, 305, 307, 313, 318, - 320, 327, 332, 337, 343, 349, 354, 358, 361, 367, 371, 378, 380, - 387, 389, 391, 400, 404, 410, 416, 424, 429, 429, 445, 452, 459, - 460, 467, 471, 475, 479, 483, 486, 488, 490, 496, 500, 508, 513, - 521, 524, 529, 534, 540, 544, 549, - }; - static const unsigned char aCode[124] = { - TK_REINDEX, TK_INDEXED, TK_INDEX, TK_DESC, TK_ESCAPE, - TK_EACH, TK_CHECK, TK_KEY, TK_BEFORE, TK_FOREIGN, - TK_FOR, TK_IGNORE, TK_LIKE_KW, TK_EXPLAIN, TK_INSTEAD, - TK_ADD, TK_DATABASE, TK_AS, TK_SELECT, TK_TABLE, - TK_JOIN_KW, TK_THEN, TK_END, TK_DEFERRABLE, TK_ELSE, - TK_EXCEPT, TK_TRANSACTION,TK_ACTION, TK_ON, TK_JOIN_KW, - TK_ALTER, TK_RAISE, TK_EXCLUSIVE, TK_EXISTS, TK_SAVEPOINT, - TK_INTERSECT, TK_TRIGGER, TK_REFERENCES, TK_CONSTRAINT, TK_INTO, - TK_OFFSET, TK_OF, TK_SET, TK_TEMP, TK_TEMP, - TK_OR, TK_UNIQUE, TK_QUERY, TK_WITHOUT, TK_WITH, - TK_JOIN_KW, TK_RELEASE, TK_ATTACH, TK_HAVING, TK_GROUP, - TK_UPDATE, TK_BEGIN, TK_JOIN_KW, TK_RECURSIVE, TK_BETWEEN, - TK_NOTNULL, TK_NOT, TK_NO, TK_NULL, TK_LIKE_KW, - TK_CASCADE, TK_ASC, TK_DELETE, TK_CASE, TK_COLLATE, - TK_CREATE, TK_CTIME_KW, TK_DETACH, TK_IMMEDIATE, TK_JOIN, - TK_INSERT, TK_MATCH, TK_PLAN, TK_ANALYZE, TK_PRAGMA, - TK_ABORT, TK_VALUES, TK_VIRTUAL, TK_LIMIT, TK_WHEN, - TK_WHERE, TK_RENAME, TK_AFTER, TK_REPLACE, TK_AND, - TK_DEFAULT, TK_AUTOINCR, TK_TO, TK_IN, TK_CAST, - TK_COLUMNKW, TK_COMMIT, TK_CONFLICT, TK_JOIN_KW, TK_CTIME_KW, - TK_CTIME_KW, TK_PRIMARY, TK_DEFERRED, TK_DISTINCT, TK_IS, - TK_DROP, TK_FAIL, TK_FROM, TK_JOIN_KW, TK_LIKE_KW, - TK_BY, TK_IF, TK_ISNULL, TK_ORDER, TK_RESTRICT, - TK_JOIN_KW, TK_ROLLBACK, TK_ROW, TK_UNION, TK_USING, - TK_VACUUM, TK_VIEW, TK_INITIALLY, TK_ALL, - }; int i, j; const char *zKW; if( n>=2 ){ i = ((charMap(z[0])*4) ^ (charMap(z[n-1])*3) ^ n) % 127; - for(i=((int)aHash[i])-1; i>=0; i=((int)aNext[i])-1){ - if( aLen[i]!=n ) continue; + for(i=((int)aKWHash[i])-1; i>=0; i=((int)aKWNext[i])-1){ + if( aKWLen[i]!=n ) continue; j = 0; - zKW = &zText[aOffset[i]]; + zKW = &zKWText[aKWOffset[i]]; #ifdef SQLITE_ASCII while( j<n && (z[j]&~0x20)==zKW[j] ){ j++; } #endif @@ -138446,71 +145832,73 @@ static int keywordCode(const char *z, int n, int *pType){ testcase( i==57 ); /* INNER */ testcase( i==58 ); /* RECURSIVE */ testcase( i==59 ); /* BETWEEN */ - testcase( i==60 ); /* NOTNULL */ - testcase( i==61 ); /* NOT */ - testcase( i==62 ); /* NO */ - testcase( i==63 ); /* NULL */ - testcase( i==64 ); /* LIKE */ - testcase( i==65 ); /* CASCADE */ - testcase( i==66 ); /* ASC */ - testcase( i==67 ); /* DELETE */ - testcase( i==68 ); /* CASE */ - testcase( i==69 ); /* COLLATE */ - testcase( i==70 ); /* CREATE */ - testcase( i==71 ); /* CURRENT_DATE */ - testcase( i==72 ); /* DETACH */ - testcase( i==73 ); /* IMMEDIATE */ - testcase( i==74 ); /* JOIN */ - testcase( i==75 ); /* INSERT */ - testcase( i==76 ); /* MATCH */ - testcase( i==77 ); /* PLAN */ - testcase( i==78 ); /* ANALYZE */ - testcase( i==79 ); /* PRAGMA */ - testcase( i==80 ); /* ABORT */ - testcase( i==81 ); /* VALUES */ - testcase( i==82 ); /* VIRTUAL */ - testcase( i==83 ); /* LIMIT */ - testcase( i==84 ); /* WHEN */ - testcase( i==85 ); /* WHERE */ - testcase( i==86 ); /* RENAME */ - testcase( i==87 ); /* AFTER */ - testcase( i==88 ); /* REPLACE */ - testcase( i==89 ); /* AND */ - testcase( i==90 ); /* DEFAULT */ - testcase( i==91 ); /* AUTOINCREMENT */ - testcase( i==92 ); /* TO */ - testcase( i==93 ); /* IN */ - testcase( i==94 ); /* CAST */ - testcase( i==95 ); /* COLUMN */ - testcase( i==96 ); /* COMMIT */ - testcase( i==97 ); /* CONFLICT */ - testcase( i==98 ); /* CROSS */ - testcase( i==99 ); /* CURRENT_TIMESTAMP */ - testcase( i==100 ); /* CURRENT_TIME */ - testcase( i==101 ); /* PRIMARY */ - testcase( i==102 ); /* DEFERRED */ - testcase( i==103 ); /* DISTINCT */ - testcase( i==104 ); /* IS */ - testcase( i==105 ); /* DROP */ - testcase( i==106 ); /* FAIL */ - testcase( i==107 ); /* FROM */ - testcase( i==108 ); /* FULL */ - testcase( i==109 ); /* GLOB */ - testcase( i==110 ); /* BY */ - testcase( i==111 ); /* IF */ - testcase( i==112 ); /* ISNULL */ - testcase( i==113 ); /* ORDER */ - testcase( i==114 ); /* RESTRICT */ - testcase( i==115 ); /* RIGHT */ - testcase( i==116 ); /* ROLLBACK */ - testcase( i==117 ); /* ROW */ - testcase( i==118 ); /* UNION */ - testcase( i==119 ); /* USING */ - testcase( i==120 ); /* VACUUM */ - testcase( i==121 ); /* VIEW */ - testcase( i==122 ); /* INITIALLY */ - testcase( i==123 ); /* ALL */ - *pType = aCode[i]; + testcase( i==60 ); /* NOTHING */ + testcase( i==61 ); /* GLOB */ + testcase( i==62 ); /* BY */ + testcase( i==63 ); /* CASCADE */ + testcase( i==64 ); /* ASC */ + testcase( i==65 ); /* DELETE */ + testcase( i==66 ); /* CASE */ + testcase( i==67 ); /* COLLATE */ + testcase( i==68 ); /* CREATE */ + testcase( i==69 ); /* CURRENT_DATE */ + testcase( i==70 ); /* DETACH */ + testcase( i==71 ); /* IMMEDIATE */ + testcase( i==72 ); /* JOIN */ + testcase( i==73 ); /* INSERT */ + testcase( i==74 ); /* LIKE */ + testcase( i==75 ); /* MATCH */ + testcase( i==76 ); /* PLAN */ + testcase( i==77 ); /* ANALYZE */ + testcase( i==78 ); /* PRAGMA */ + testcase( i==79 ); /* ABORT */ + testcase( i==80 ); /* VALUES */ + testcase( i==81 ); /* VIRTUAL */ + testcase( i==82 ); /* LIMIT */ + testcase( i==83 ); /* WHEN */ + testcase( i==84 ); /* NOTNULL */ + testcase( i==85 ); /* NOT */ + testcase( i==86 ); /* NO */ + testcase( i==87 ); /* NULL */ + testcase( i==88 ); /* WHERE */ + testcase( i==89 ); /* RENAME */ + testcase( i==90 ); /* AFTER */ + testcase( i==91 ); /* REPLACE */ + testcase( i==92 ); /* AND */ + testcase( i==93 ); /* DEFAULT */ + testcase( i==94 ); /* AUTOINCREMENT */ + testcase( i==95 ); /* TO */ + testcase( i==96 ); /* IN */ + testcase( i==97 ); /* CAST */ + testcase( i==98 ); /* COLUMN */ + testcase( i==99 ); /* COMMIT */ + testcase( i==100 ); /* CONFLICT */ + testcase( i==101 ); /* CROSS */ + testcase( i==102 ); /* CURRENT_TIMESTAMP */ + testcase( i==103 ); /* CURRENT_TIME */ + testcase( i==104 ); /* PRIMARY */ + testcase( i==105 ); /* DEFERRED */ + testcase( i==106 ); /* DISTINCT */ + testcase( i==107 ); /* IS */ + testcase( i==108 ); /* DO */ + testcase( i==109 ); /* ORDER */ + testcase( i==110 ); /* RESTRICT */ + testcase( i==111 ); /* DROP */ + testcase( i==112 ); /* FAIL */ + testcase( i==113 ); /* FROM */ + testcase( i==114 ); /* FULL */ + testcase( i==115 ); /* IF */ + testcase( i==116 ); /* ISNULL */ + testcase( i==117 ); /* RIGHT */ + testcase( i==118 ); /* ROLLBACK */ + testcase( i==119 ); /* ROW */ + testcase( i==120 ); /* UNION */ + testcase( i==121 ); /* USING */ + testcase( i==122 ); /* VACUUM */ + testcase( i==123 ); /* VIEW */ + testcase( i==124 ); /* INITIALLY */ + testcase( i==125 ); /* ALL */ + *pType = aKWCode[i]; break; } } @@ -138521,7 +145909,17 @@ SQLITE_PRIVATE int sqlite3KeywordCode(const unsigned char *z, int n){ keywordCode((char*)z, n, &id); return id; } -#define SQLITE_N_KEYWORD 124 +#define SQLITE_N_KEYWORD 126 +SQLITE_API int sqlite3_keyword_name(int i,const char **pzName,int *pnName){ + if( i<0 || i>=SQLITE_N_KEYWORD ) return SQLITE_ERROR; + *pzName = zKWText + aKWOffset[i]; + *pnName = aKWLen[i]; + return SQLITE_OK; +} +SQLITE_API int sqlite3_keyword_count(void){ return SQLITE_N_KEYWORD; } +SQLITE_API int sqlite3_keyword_check(const char *zName, int nName){ + return TK_ID!=sqlite3KeywordCode((const u8*)zName, nName); +} /************** End of keywordhash.h *****************************************/ /************** Continuing where we left off in tokenize.c *******************/ @@ -138857,14 +146255,14 @@ SQLITE_PRIVATE int sqlite3GetToken(const unsigned char *z, int *tokenType){ */ SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzErrMsg){ int nErr = 0; /* Number of errors encountered */ - int i; /* Loop counter */ void *pEngine; /* The LEMON-generated LALR(1) parser */ + int n = 0; /* Length of the next token token */ int tokenType; /* type of the next token */ int lastTokenParsed = -1; /* type of the previous token */ sqlite3 *db = pParse->db; /* The database connection */ int mxSqlLen; /* Max length of an SQL string */ #ifdef sqlite3Parser_ENGINEALWAYSONSTACK - unsigned char zSpace[sizeof(yyParser)]; /* Space for parser engine object */ + yyParser sEngine; /* Space to hold the Lemon-generated Parser object */ #endif assert( zSql!=0 ); @@ -138874,14 +146272,13 @@ SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzEr } pParse->rc = SQLITE_OK; pParse->zTail = zSql; - i = 0; assert( pzErrMsg!=0 ); /* sqlite3ParserTrace(stdout, "parser: "); */ #ifdef sqlite3Parser_ENGINEALWAYSONSTACK - pEngine = zSpace; - sqlite3ParserInit(pEngine); + pEngine = &sEngine; + sqlite3ParserInit(pEngine, pParse); #else - pEngine = sqlite3ParserAlloc(sqlite3Malloc); + pEngine = sqlite3ParserAlloc(sqlite3Malloc, pParse); if( pEngine==0 ){ sqlite3OomFault(db); return SQLITE_NOMEM_BKPT; @@ -138892,12 +146289,10 @@ SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzEr assert( pParse->nVar==0 ); assert( pParse->pVList==0 ); while( 1 ){ - assert( i>=0 ); - if( zSql[i]!=0 ){ - pParse->sLastToken.z = &zSql[i]; - pParse->sLastToken.n = sqlite3GetToken((u8*)&zSql[i],&tokenType); - i += pParse->sLastToken.n; - if( i>mxSqlLen ){ + if( zSql[0]!=0 ){ + n = sqlite3GetToken((u8*)zSql, &tokenType); + mxSqlLen -= n; + if( mxSqlLen<0 ){ pParse->rc = SQLITE_TOOBIG; break; } @@ -138911,6 +146306,7 @@ SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzEr }else{ tokenType = TK_SEMI; } + n = 0; } if( tokenType>=TK_SPACE ){ assert( tokenType==TK_SPACE || tokenType==TK_ILLEGAL ); @@ -138919,18 +146315,21 @@ SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzEr break; } if( tokenType==TK_ILLEGAL ){ - sqlite3ErrorMsg(pParse, "unrecognized token: \"%T\"", - &pParse->sLastToken); + sqlite3ErrorMsg(pParse, "unrecognized token: \"%.*s\"", n, zSql); break; } + zSql += n; }else{ - sqlite3Parser(pEngine, tokenType, pParse->sLastToken, pParse); + pParse->sLastToken.z = zSql; + pParse->sLastToken.n = n; + sqlite3Parser(pEngine, tokenType, pParse->sLastToken); lastTokenParsed = tokenType; + zSql += n; if( pParse->rc!=SQLITE_OK || db->mallocFailed ) break; } } assert( nErr==0 ); - pParse->zTail = &zSql[i]; + pParse->zTail = zSql; #ifdef YYTRACKMAXSTACKDEPTH sqlite3_mutex_enter(sqlite3MallocMutex()); sqlite3StatusHighwater(SQLITE_STATUS_PARSER_STACK, @@ -138985,7 +146384,7 @@ SQLITE_PRIVATE int sqlite3RunParser(Parse *pParse, const char *zSql, char **pzEr while( pParse->pAinc ){ AutoincInfo *p = pParse->pAinc; pParse->pAinc = p->pNext; - sqlite3DbFree(db, p); + sqlite3DbFreeNN(db, p); } while( pParse->pZombieTab ){ Table *p = pParse->pZombieTab; @@ -139362,6 +146761,10 @@ SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db); */ /* #include "sqlite3.h" */ +#ifdef SQLITE_OMIT_VIRTUALTABLE +# undef SQLITE_ENABLE_RTREE +#endif + #if 0 extern "C" { #endif /* __cplusplus */ @@ -139375,7 +146778,7 @@ SQLITE_PRIVATE int sqlite3RtreeInit(sqlite3 *db); /************** End of rtree.h ***********************************************/ /************** Continuing where we left off in main.c ***********************/ #endif -#ifdef SQLITE_ENABLE_ICU +#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS) /************** Include sqliteicu.h in the middle of main.c ******************/ /************** Begin file sqliteicu.h ***************************************/ /* @@ -139412,6 +146815,9 @@ SQLITE_PRIVATE int sqlite3IcuInit(sqlite3 *db); #ifdef SQLITE_ENABLE_JSON1 SQLITE_PRIVATE int sqlite3Json1Init(sqlite3*); #endif +#ifdef SQLITE_ENABLE_STMTVTAB +SQLITE_PRIVATE int sqlite3StmtVtabInit(sqlite3*); +#endif #ifdef SQLITE_ENABLE_FTS5 SQLITE_PRIVATE int sqlite3Fts5Init(sqlite3*); #endif @@ -139428,11 +146834,13 @@ SQLITE_API const char sqlite3_version[] = SQLITE_VERSION; */ SQLITE_API const char *sqlite3_libversion(void){ return sqlite3_version; } -/* IMPLEMENTATION-OF: R-63124-39300 The sqlite3_sourceid() function returns a +/* IMPLEMENTATION-OF: R-25063-23286 The sqlite3_sourceid() function returns a ** pointer to a string constant whose value is the same as the -** SQLITE_SOURCE_ID C preprocessor macro. +** SQLITE_SOURCE_ID C preprocessor macro. Except if SQLite is built using +** an edited copy of the amalgamation, then the last four characters of +** the hash might be different from SQLITE_SOURCE_ID. */ -SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } +/* SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } */ /* IMPLEMENTATION-OF: R-35210-63508 The sqlite3_libversion_number() function ** returns an integer equal to SQLITE_VERSION_NUMBER. @@ -139618,6 +147026,11 @@ SQLITE_API int sqlite3_initialize(void){ sqlite3GlobalConfig.isPCacheInit = 1; rc = sqlite3OsInit(); } +#ifdef SQLITE_ENABLE_DESERIALIZE + if( rc==SQLITE_OK ){ + rc = sqlite3MemdbInit(); + } +#endif if( rc==SQLITE_OK ){ sqlite3PCacheBufferSetup( sqlite3GlobalConfig.pPage, sqlite3GlobalConfig.szPage, sqlite3GlobalConfig.nPage); @@ -139650,7 +147063,7 @@ SQLITE_API int sqlite3_initialize(void){ #ifndef NDEBUG #ifndef SQLITE_OMIT_FLOATING_POINT /* This section of code's only "output" is via assert() statements. */ - if ( rc==SQLITE_OK ){ + if( rc==SQLITE_OK ){ u64 x = (((u64)1)<<63)-1; double y; assert(sizeof(x)==8); @@ -139817,14 +147230,8 @@ SQLITE_API int sqlite3_config(int op, ...){ sqlite3GlobalConfig.bMemstat = va_arg(ap, int); break; } - case SQLITE_CONFIG_SCRATCH: { - /* EVIDENCE-OF: R-08404-60887 There are three arguments to - ** SQLITE_CONFIG_SCRATCH: A pointer an 8-byte aligned memory buffer from - ** which the scratch allocations will be drawn, the size of each scratch - ** allocation (sz), and the maximum number of scratch allocations (N). */ - sqlite3GlobalConfig.pScratch = va_arg(ap, void*); - sqlite3GlobalConfig.szScratch = va_arg(ap, int); - sqlite3GlobalConfig.nScratch = va_arg(ap, int); + case SQLITE_CONFIG_SMALL_MALLOC: { + sqlite3GlobalConfig.bSmallMalloc = va_arg(ap, int); break; } case SQLITE_CONFIG_PAGECACHE: { @@ -140022,6 +147429,17 @@ SQLITE_API int sqlite3_config(int op, ...){ break; } +#ifdef SQLITE_ENABLE_SORTER_REFERENCES + case SQLITE_CONFIG_SORTERREF_SIZE: { + int iVal = va_arg(ap, int); + if( iVal<0 ){ + iVal = SQLITE_DEFAULT_SORTERREF_SIZE; + } + sqlite3GlobalConfig.szSorterRef = (u32)iVal; + break; + } +#endif /* SQLITE_ENABLE_SORTER_REFERENCES */ + default: { rc = SQLITE_ERROR; break; @@ -140045,7 +147463,8 @@ SQLITE_API int sqlite3_config(int op, ...){ static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){ #ifndef SQLITE_OMIT_LOOKASIDE void *pStart; - if( db->lookaside.nOut ){ + + if( sqlite3LookasideUsed(db,0)>0 ){ return SQLITE_BUSY; } /* Free any existing lookaside buffer for this handle before @@ -140073,16 +147492,18 @@ static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){ pStart = pBuf; } db->lookaside.pStart = pStart; + db->lookaside.pInit = 0; db->lookaside.pFree = 0; db->lookaside.sz = (u16)sz; if( pStart ){ int i; LookasideSlot *p; assert( sz > (int)sizeof(LookasideSlot*) ); + db->lookaside.nSlot = cnt; p = (LookasideSlot*)pStart; for(i=cnt-1; i>=0; i--){ - p->pNext = db->lookaside.pFree; - db->lookaside.pFree = p; + p->pNext = db->lookaside.pInit; + db->lookaside.pInit = p; p = (LookasideSlot*)&((u8*)p)[sz]; } db->lookaside.pEnd = p; @@ -140093,6 +147514,7 @@ static int setupLookaside(sqlite3 *db, void *pBuf, int sz, int cnt){ db->lookaside.pEnd = db; db->lookaside.bDisable = 1; db->lookaside.bMalloced = 0; + db->lookaside.nSlot = 0; } #endif /* SQLITE_OMIT_LOOKASIDE */ return SQLITE_OK; @@ -140174,6 +147596,8 @@ SQLITE_API int sqlite3_db_config(sqlite3 *db, int op, ...){ va_start(ap, op); switch( op ){ case SQLITE_DBCONFIG_MAINDBNAME: { + /* IMP: R-06824-28531 */ + /* IMP: R-36257-52125 */ db->aDb[0].zDbSName = va_arg(ap,char*); rc = SQLITE_OK; break; @@ -140195,6 +147619,9 @@ SQLITE_API int sqlite3_db_config(sqlite3 *db, int op, ...){ { SQLITE_DBCONFIG_ENABLE_FTS3_TOKENIZER, SQLITE_Fts3Tokenizer }, { SQLITE_DBCONFIG_ENABLE_LOAD_EXTENSION, SQLITE_LoadExtension }, { SQLITE_DBCONFIG_NO_CKPT_ON_CLOSE, SQLITE_NoCkptOnClose }, + { SQLITE_DBCONFIG_ENABLE_QPSG, SQLITE_EnableQPSG }, + { SQLITE_DBCONFIG_TRIGGER_EQP, SQLITE_TriggerEQP }, + { SQLITE_DBCONFIG_RESET_DATABASE, SQLITE_ResetDatabase }, }; unsigned int i; rc = SQLITE_ERROR; /* IMP: R-42790-23372 */ @@ -140202,7 +147629,7 @@ SQLITE_API int sqlite3_db_config(sqlite3 *db, int op, ...){ if( aFlagOp[i].op==op ){ int onoff = va_arg(ap, int); int *pRes = va_arg(ap, int*); - int oldFlags = db->flags; + u32 oldFlags = db->flags; if( onoff>0 ){ db->flags |= aFlagOp[i].mask; }else if( onoff==0 ){ @@ -140251,6 +147678,7 @@ static int binCollFunc( /* EVIDENCE-OF: R-65033-28449 The built-in BINARY collation compares ** strings byte by byte using the memcmp() function from the standard C ** library. */ + assert( pKey1 && pKey2 ); rc = memcmp(pKey1, pKey2, n); if( rc==0 ){ if( padFlag @@ -140306,6 +147734,21 @@ SQLITE_API sqlite_int64 sqlite3_last_insert_rowid(sqlite3 *db){ } /* +** Set the value returned by the sqlite3_last_insert_rowid() API function. +*/ +SQLITE_API void sqlite3_set_last_insert_rowid(sqlite3 *db, sqlite3_int64 iRowid){ +#ifdef SQLITE_ENABLE_API_ARMOR + if( !sqlite3SafetyCheckOk(db) ){ + (void)SQLITE_MISUSE_BKPT; + return; + } +#endif + sqlite3_mutex_enter(db->mutex); + db->lastRowid = iRowid; + sqlite3_mutex_leave(db->mutex); +} + +/* ** Return the number of changes in the most recent call to sqlite3_exec(). */ SQLITE_API int sqlite3_changes(sqlite3 *db){ @@ -140593,7 +148036,7 @@ SQLITE_PRIVATE void sqlite3LeaveMutexAndCloseZombie(sqlite3 *db){ sqlite3_mutex_leave(db->mutex); db->magic = SQLITE_MAGIC_CLOSED; sqlite3_mutex_free(db->mutex); - assert( db->lookaside.nOut==0 ); /* Fails on a lookaside memory leak */ + assert( sqlite3LookasideUsed(db,0)==0 ); if( db->lookaside.bMalloced ){ sqlite3_free(db->lookaside.pStart); } @@ -140621,7 +148064,7 @@ SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3 *db, int tripCode){ ** the database rollback and schema reset, which can cause false ** corruption reports in some cases. */ sqlite3BtreeEnterAll(db); - schemaChange = (db->flags & SQLITE_InternChanges)!=0 && db->init.busy==0; + schemaChange = (db->mDbFlags & DBFLAG_SchemaChange)!=0 && db->init.busy==0; for(i=0; i<db->nDb; i++){ Btree *p = db->aDb[i].pBt; @@ -140635,7 +148078,7 @@ SQLITE_PRIVATE void sqlite3RollbackAll(sqlite3 *db, int tripCode){ sqlite3VtabRollback(db); sqlite3EndBenignMalloc(); - if( (db->flags&SQLITE_InternChanges)!=0 && db->init.busy==0 ){ + if( (db->mDbFlags&DBFLAG_SchemaChange)!=0 && db->init.busy==0 ){ sqlite3ExpirePreparedStatements(db); sqlite3ResetAllSchemasOfConnection(db); } @@ -140676,9 +148119,10 @@ SQLITE_PRIVATE const char *sqlite3ErrName(int rc){ case SQLITE_NOMEM: zName = "SQLITE_NOMEM"; break; case SQLITE_READONLY: zName = "SQLITE_READONLY"; break; case SQLITE_READONLY_RECOVERY: zName = "SQLITE_READONLY_RECOVERY"; break; - case SQLITE_READONLY_CANTLOCK: zName = "SQLITE_READONLY_CANTLOCK"; break; + case SQLITE_READONLY_CANTINIT: zName = "SQLITE_READONLY_CANTINIT"; break; case SQLITE_READONLY_ROLLBACK: zName = "SQLITE_READONLY_ROLLBACK"; break; case SQLITE_READONLY_DBMOVED: zName = "SQLITE_READONLY_DBMOVED"; break; + case SQLITE_READONLY_DIRECTORY: zName = "SQLITE_READONLY_DIRECTORY";break; case SQLITE_INTERRUPT: zName = "SQLITE_INTERRUPT"; break; case SQLITE_IOERR: zName = "SQLITE_IOERR"; break; case SQLITE_IOERR_READ: zName = "SQLITE_IOERR_READ"; break; @@ -140768,10 +148212,10 @@ SQLITE_PRIVATE const char *sqlite3ErrName(int rc){ SQLITE_PRIVATE const char *sqlite3ErrStr(int rc){ static const char* const aMsg[] = { /* SQLITE_OK */ "not an error", - /* SQLITE_ERROR */ "SQL logic error or missing database", + /* SQLITE_ERROR */ "SQL logic error", /* SQLITE_INTERNAL */ 0, /* SQLITE_PERM */ "access permission denied", - /* SQLITE_ABORT */ "callback requested query abort", + /* SQLITE_ABORT */ "query aborted", /* SQLITE_BUSY */ "database is locked", /* SQLITE_LOCKED */ "database table is locked", /* SQLITE_NOMEM */ "out of memory", @@ -140783,17 +148227,23 @@ SQLITE_PRIVATE const char *sqlite3ErrStr(int rc){ /* SQLITE_FULL */ "database or disk is full", /* SQLITE_CANTOPEN */ "unable to open database file", /* SQLITE_PROTOCOL */ "locking protocol", - /* SQLITE_EMPTY */ "table contains no data", + /* SQLITE_EMPTY */ 0, /* SQLITE_SCHEMA */ "database schema has changed", /* SQLITE_TOOBIG */ "string or blob too big", /* SQLITE_CONSTRAINT */ "constraint failed", /* SQLITE_MISMATCH */ "datatype mismatch", - /* SQLITE_MISUSE */ "library routine called out of sequence", + /* SQLITE_MISUSE */ "bad parameter or other API misuse", +#ifdef SQLITE_DISABLE_LFS /* SQLITE_NOLFS */ "large file support is disabled", +#else + /* SQLITE_NOLFS */ 0, +#endif /* SQLITE_AUTH */ "authorization denied", - /* SQLITE_FORMAT */ "auxiliary database format error", - /* SQLITE_RANGE */ "bind or column index out of range", - /* SQLITE_NOTADB */ "file is encrypted or is not a database", + /* SQLITE_FORMAT */ 0, + /* SQLITE_RANGE */ "column index out of range", + /* SQLITE_NOTADB */ "file is not a database", + /* SQLITE_NOTICE */ "notification message", + /* SQLITE_WARNING */ "warning message", }; const char *zErr = "unknown error"; switch( rc ){ @@ -140801,6 +148251,14 @@ SQLITE_PRIVATE const char *sqlite3ErrStr(int rc){ zErr = "abort due to ROLLBACK"; break; } + case SQLITE_ROW: { + zErr = "another row available"; + break; + } + case SQLITE_DONE: { + zErr = "no more rows available"; + break; + } default: { rc &= 0xff; if( ALWAYS(rc>=0) && rc<ArraySize(aMsg) && aMsg[rc]!=0 ){ @@ -140817,21 +148275,40 @@ SQLITE_PRIVATE const char *sqlite3ErrStr(int rc){ ** again until a timeout value is reached. The timeout value is ** an integer number of milliseconds passed in as the first ** argument. +** +** Return non-zero to retry the lock. Return zero to stop trying +** and cause SQLite to return SQLITE_BUSY. */ static int sqliteDefaultBusyCallback( - void *ptr, /* Database connection */ - int count /* Number of times table has been busy */ + void *ptr, /* Database connection */ + int count, /* Number of times table has been busy */ + sqlite3_file *pFile /* The file on which the lock occurred */ ){ #if SQLITE_OS_WIN || HAVE_USLEEP + /* This case is for systems that have support for sleeping for fractions of + ** a second. Examples: All windows systems, unix systems with usleep() */ static const u8 delays[] = { 1, 2, 5, 10, 15, 20, 25, 25, 25, 50, 50, 100 }; static const u8 totals[] = { 0, 1, 3, 8, 18, 33, 53, 78, 103, 128, 178, 228 }; # define NDELAY ArraySize(delays) sqlite3 *db = (sqlite3 *)ptr; - int timeout = db->busyTimeout; + int tmout = db->busyTimeout; int delay, prior; +#ifdef SQLITE_ENABLE_SETLK_TIMEOUT + if( sqlite3OsFileControl(pFile,SQLITE_FCNTL_LOCK_TIMEOUT,&tmout)==SQLITE_OK ){ + if( count ){ + tmout = 0; + sqlite3OsFileControl(pFile, SQLITE_FCNTL_LOCK_TIMEOUT, &tmout); + return 0; + }else{ + return 1; + } + } +#else + UNUSED_PARAMETER(pFile); +#endif assert( count>=0 ); if( count < NDELAY ){ delay = delays[count]; @@ -140840,16 +148317,19 @@ static int sqliteDefaultBusyCallback( delay = delays[NDELAY-1]; prior = totals[NDELAY-1] + delay*(count-(NDELAY-1)); } - if( prior + delay > timeout ){ - delay = timeout - prior; + if( prior + delay > tmout ){ + delay = tmout - prior; if( delay<=0 ) return 0; } sqlite3OsSleep(db->pVfs, delay*1000); return 1; #else + /* This case for unix systems that lack usleep() support. Sleeping + ** must be done in increments of whole seconds */ sqlite3 *db = (sqlite3 *)ptr; - int timeout = ((sqlite3 *)ptr)->busyTimeout; - if( (count+1)*1000 > timeout ){ + int tmout = ((sqlite3 *)ptr)->busyTimeout; + UNUSED_PARAMETER(pFile); + if( (count+1)*1000 > tmout ){ return 0; } sqlite3OsSleep(db->pVfs, 1000000); @@ -140860,14 +148340,25 @@ static int sqliteDefaultBusyCallback( /* ** Invoke the given busy handler. ** -** This routine is called when an operation failed with a lock. +** This routine is called when an operation failed to acquire a +** lock on VFS file pFile. +** ** If this routine returns non-zero, the lock is retried. If it ** returns 0, the operation aborts with an SQLITE_BUSY error. */ -SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p){ +SQLITE_PRIVATE int sqlite3InvokeBusyHandler(BusyHandler *p, sqlite3_file *pFile){ int rc; - if( NEVER(p==0) || p->xFunc==0 || p->nBusy<0 ) return 0; - rc = p->xFunc(p->pArg, p->nBusy); + if( p->xBusyHandler==0 || p->nBusy<0 ) return 0; + if( p->bExtraFileArg ){ + /* Add an extra parameter with the pFile pointer to the end of the + ** callback argument list */ + int (*xTra)(void*,int,sqlite3_file*); + xTra = (int(*)(void*,int,sqlite3_file*))p->xBusyHandler; + rc = xTra(p->pBusyArg, p->nBusy, pFile); + }else{ + /* Legacy style busy handler callback */ + rc = p->xBusyHandler(p->pBusyArg, p->nBusy); + } if( rc==0 ){ p->nBusy = -1; }else{ @@ -140889,9 +148380,10 @@ SQLITE_API int sqlite3_busy_handler( if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; #endif sqlite3_mutex_enter(db->mutex); - db->busyHandler.xFunc = xBusy; - db->busyHandler.pArg = pArg; + db->busyHandler.xBusyHandler = xBusy; + db->busyHandler.pBusyArg = pArg; db->busyHandler.nBusy = 0; + db->busyHandler.bExtraFileArg = 0; db->busyTimeout = 0; sqlite3_mutex_leave(db->mutex); return SQLITE_OK; @@ -140939,8 +148431,10 @@ SQLITE_API int sqlite3_busy_timeout(sqlite3 *db, int ms){ if( !sqlite3SafetyCheckOk(db) ) return SQLITE_MISUSE_BKPT; #endif if( ms>0 ){ - sqlite3_busy_handler(db, sqliteDefaultBusyCallback, (void*)db); + sqlite3_busy_handler(db, (int(*)(void*,int))sqliteDefaultBusyCallback, + (void*)db); db->busyTimeout = ms; + db->busyHandler.bExtraFileArg = 1; }else{ sqlite3_busy_handler(db, 0, 0); } @@ -141101,11 +148595,13 @@ SQLITE_API int sqlite3_create_function_v2( #endif sqlite3_mutex_enter(db->mutex); if( xDestroy ){ - pArg = (FuncDestructor *)sqlite3DbMallocZero(db, sizeof(FuncDestructor)); + pArg = (FuncDestructor *)sqlite3Malloc(sizeof(FuncDestructor)); if( !pArg ){ + sqlite3OomFault(db); xDestroy(p); goto out; } + pArg->nRef = 0; pArg->xDestroy = xDestroy; pArg->pUserData = p; } @@ -141113,7 +148609,7 @@ SQLITE_API int sqlite3_create_function_v2( if( pArg && pArg->nRef==0 ){ assert( rc!=SQLITE_OK ); xDestroy(p); - sqlite3DbFree(db, pArg); + sqlite3_free(pArg); } out: @@ -141152,6 +148648,28 @@ SQLITE_API int sqlite3_create_function16( /* +** The following is the implementation of an SQL function that always +** fails with an error message stating that the function is used in the +** wrong context. The sqlite3_overload_function() API might construct +** SQL function that use this routine so that the functions will exist +** for name resolution but are actually overloaded by the xFindFunction +** method of virtual tables. +*/ +static void sqlite3InvalidFunction( + sqlite3_context *context, /* The function calling context */ + int NotUsed, /* Number of arguments to the function */ + sqlite3_value **NotUsed2 /* Value of each argument */ +){ + const char *zName = (const char*)sqlite3_user_data(context); + char *zErr; + UNUSED_PARAMETER2(NotUsed, NotUsed2); + zErr = sqlite3_mprintf( + "unable to use function %s in the requested context", zName); + sqlite3_result_error(context, zErr, -1); + sqlite3_free(zErr); +} + +/* ** Declare that a function has been overloaded by a virtual table. ** ** If the function already exists as a regular global function, then @@ -141168,7 +148686,8 @@ SQLITE_API int sqlite3_overload_function( const char *zName, int nArg ){ - int rc = SQLITE_OK; + int rc; + char *zCopy; #ifdef SQLITE_ENABLE_API_ARMOR if( !sqlite3SafetyCheckOk(db) || zName==0 || nArg<-2 ){ @@ -141176,13 +148695,13 @@ SQLITE_API int sqlite3_overload_function( } #endif sqlite3_mutex_enter(db->mutex); - if( sqlite3FindFunction(db, zName, nArg, SQLITE_UTF8, 0)==0 ){ - rc = sqlite3CreateFunc(db, zName, nArg, SQLITE_UTF8, - 0, sqlite3InvalidFunction, 0, 0, 0); - } - rc = sqlite3ApiExit(db, rc); + rc = sqlite3FindFunction(db, zName, nArg, SQLITE_UTF8, 0)!=0; sqlite3_mutex_leave(db->mutex); - return rc; + if( rc ) return SQLITE_OK; + zCopy = sqlite3_mprintf(zName); + if( zCopy==0 ) return SQLITE_NOMEM; + return sqlite3_create_function_v2(db, zName, nArg, SQLITE_UTF8, + zCopy, sqlite3InvalidFunction, 0, 0, sqlite3_free); } #ifndef SQLITE_OMIT_TRACE @@ -141533,7 +149052,8 @@ SQLITE_API int sqlite3_wal_checkpoint(sqlite3 *db, const char *zDb){ ** checkpointed. If an error is encountered it is returned immediately - ** no attempt is made to checkpoint any remaining databases. ** -** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL or RESTART. +** Parameter eMode is one of SQLITE_CHECKPOINT_PASSIVE, FULL, RESTART +** or TRUNCATE. */ SQLITE_PRIVATE int sqlite3Checkpoint(sqlite3 *db, int iDb, int eMode, int *pnLog, int *pnCkpt){ int rc = SQLITE_OK; /* Return code */ @@ -141633,12 +149153,9 @@ SQLITE_API const void *sqlite3_errmsg16(sqlite3 *db){ 'o', 'u', 't', ' ', 'o', 'f', ' ', 'm', 'e', 'm', 'o', 'r', 'y', 0 }; static const u16 misuse[] = { - 'l', 'i', 'b', 'r', 'a', 'r', 'y', ' ', - 'r', 'o', 'u', 't', 'i', 'n', 'e', ' ', - 'c', 'a', 'l', 'l', 'e', 'd', ' ', - 'o', 'u', 't', ' ', - 'o', 'f', ' ', - 's', 'e', 'q', 'u', 'e', 'n', 'c', 'e', 0 + 'b', 'a', 'd', ' ', 'p', 'a', 'r', 'a', 'm', 'e', 't', 'e', 'r', ' ', + 'o', 'r', ' ', 'o', 't', 'h', 'e', 'r', ' ', 'A', 'P', 'I', ' ', + 'm', 'i', 's', 'u', 's', 'e', 0 }; const void *z; @@ -142173,26 +149690,6 @@ static int openDatabase( if( rc ) return rc; #endif - /* Only allow sensible combinations of bits in the flags argument. - ** Throw an error if any non-sense combination is used. If we - ** do not block illegal combinations here, it could trigger - ** assert() statements in deeper layers. Sensible combinations - ** are: - ** - ** 1: SQLITE_OPEN_READONLY - ** 2: SQLITE_OPEN_READWRITE - ** 6: SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE - */ - assert( SQLITE_OPEN_READONLY == 0x01 ); - assert( SQLITE_OPEN_READWRITE == 0x02 ); - assert( SQLITE_OPEN_CREATE == 0x04 ); - testcase( (1<<(flags&7))==0x02 ); /* READONLY */ - testcase( (1<<(flags&7))==0x04 ); /* READWRITE */ - testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */ - if( ((1<<(flags&7)) & 0x46)==0 ){ - return SQLITE_MISUSE_BKPT; /* IMP: R-65497-44594 */ - } - if( sqlite3GlobalConfig.bCoreMutex==0 ){ isThreadsafe = 0; }else if( flags & SQLITE_OPEN_NOMUTEX ){ @@ -142202,6 +149699,7 @@ static int openDatabase( }else{ isThreadsafe = sqlite3GlobalConfig.bFullMutex; } + if( flags & SQLITE_OPEN_PRIVATECACHE ){ flags &= ~SQLITE_OPEN_SHAREDCACHE; }else if( sqlite3GlobalConfig.sharedCacheEnabled ){ @@ -142234,13 +149732,20 @@ static int openDatabase( /* Allocate the sqlite data structure */ db = sqlite3MallocZero( sizeof(sqlite3) ); if( db==0 ) goto opendb_out; - if( isThreadsafe ){ + if( isThreadsafe +#ifdef SQLITE_ENABLE_MULTITHREADED_CHECKS + || sqlite3GlobalConfig.bCoreMutex +#endif + ){ db->mutex = sqlite3MutexAlloc(SQLITE_MUTEX_RECURSIVE); if( db->mutex==0 ){ sqlite3_free(db); db = 0; goto opendb_out; } + if( isThreadsafe==0 ){ + sqlite3MutexWarnOnContention(db->mutex); + } } sqlite3_mutex_enter(db->mutex); db->errMask = 0xff; @@ -142284,6 +149789,9 @@ static int openDatabase( #if defined(SQLITE_ENABLE_FTS3_TOKENIZER) | SQLITE_Fts3Tokenizer #endif +#if defined(SQLITE_ENABLE_QPSG) + | SQLITE_EnableQPSG +#endif ; sqlite3HashInit(&db->aCollSeq); #ifndef SQLITE_OMIT_VIRTUALTABLE @@ -142311,9 +149819,30 @@ static int openDatabase( db->pDfltColl = sqlite3FindCollSeq(db, SQLITE_UTF8, sqlite3StrBINARY, 0); assert( db->pDfltColl!=0 ); - /* Parse the filename/URI argument. */ + /* Parse the filename/URI argument + ** + ** Only allow sensible combinations of bits in the flags argument. + ** Throw an error if any non-sense combination is used. If we + ** do not block illegal combinations here, it could trigger + ** assert() statements in deeper layers. Sensible combinations + ** are: + ** + ** 1: SQLITE_OPEN_READONLY + ** 2: SQLITE_OPEN_READWRITE + ** 6: SQLITE_OPEN_READWRITE | SQLITE_OPEN_CREATE + */ db->openFlags = flags; - rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg); + assert( SQLITE_OPEN_READONLY == 0x01 ); + assert( SQLITE_OPEN_READWRITE == 0x02 ); + assert( SQLITE_OPEN_CREATE == 0x04 ); + testcase( (1<<(flags&7))==0x02 ); /* READONLY */ + testcase( (1<<(flags&7))==0x04 ); /* READWRITE */ + testcase( (1<<(flags&7))==0x40 ); /* READWRITE | CREATE */ + if( ((1<<(flags&7)) & 0x46)==0 ){ + rc = SQLITE_MISUSE_BKPT; /* IMP: R-65497-44594 */ + }else{ + rc = sqlite3ParseUri(zVfs, zFilename, &flags, &db->pVfs, &zOpen, &zErrMsg); + } if( rc!=SQLITE_OK ){ if( rc==SQLITE_NOMEM ) sqlite3OomFault(db); sqlite3ErrorWithMsg(db, rc, zErrMsg ? "%s" : 0, zErrMsg); @@ -142398,7 +149927,7 @@ static int openDatabase( } #endif -#ifdef SQLITE_ENABLE_ICU +#if defined(SQLITE_ENABLE_ICU) || defined(SQLITE_ENABLE_ICU_COLLATIONS) if( !db->mallocFailed && rc==SQLITE_OK ){ rc = sqlite3IcuInit(db); } @@ -142410,6 +149939,12 @@ static int openDatabase( } #endif +#ifdef SQLITE_ENABLE_DBPAGE_VTAB + if( !db->mallocFailed && rc==SQLITE_OK){ + rc = sqlite3DbpageRegister(db); + } +#endif + #ifdef SQLITE_ENABLE_DBSTAT_VTAB if( !db->mallocFailed && rc==SQLITE_OK){ rc = sqlite3DbstatRegister(db); @@ -142422,6 +149957,12 @@ static int openDatabase( } #endif +#ifdef SQLITE_ENABLE_STMTVTAB + if( !db->mallocFailed && rc==SQLITE_OK){ + rc = sqlite3StmtVtabInit(db); + } +#endif + /* -DSQLITE_DEFAULT_LOCKING_MODE=1 makes EXCLUSIVE the default locking ** mode. -DSQLITE_DEFAULT_LOCKING_MODE=0 make NORMAL the default locking ** mode. Doing nothing at all also makes NORMAL the default. @@ -142464,16 +150005,18 @@ opendb_out: #endif #if defined(SQLITE_HAS_CODEC) if( rc==SQLITE_OK ){ - const char *zHexKey = sqlite3_uri_parameter(zOpen, "hexkey"); - if( zHexKey && zHexKey[0] ){ + const char *zKey; + if( (zKey = sqlite3_uri_parameter(zOpen, "hexkey"))!=0 && zKey[0] ){ u8 iByte; int i; - char zKey[40]; - for(i=0, iByte=0; i<sizeof(zKey)*2 && sqlite3Isxdigit(zHexKey[i]); i++){ - iByte = (iByte<<4) + sqlite3HexToInt(zHexKey[i]); - if( (i&1)!=0 ) zKey[i/2] = iByte; + char zDecoded[40]; + for(i=0, iByte=0; i<sizeof(zDecoded)*2 && sqlite3Isxdigit(zKey[i]); i++){ + iByte = (iByte<<4) + sqlite3HexToInt(zKey[i]); + if( (i&1)!=0 ) zDecoded[i/2] = iByte; } - sqlite3_key_v2(db, 0, zKey, i/2); + sqlite3_key_v2(db, 0, zDecoded, i/2); + }else if( (zKey = sqlite3_uri_parameter(zOpen, "key"))!=0 ){ + sqlite3_key_v2(db, 0, zKey, sqlite3Strlen30(zKey)); } } #endif @@ -142686,31 +150229,37 @@ SQLITE_API int sqlite3_get_autocommit(sqlite3 *db){ ** 2. Invoke sqlite3_log() to provide the source code location where ** a low-level error is first detected. */ -static int reportError(int iErr, int lineno, const char *zType){ +SQLITE_PRIVATE int sqlite3ReportError(int iErr, int lineno, const char *zType){ sqlite3_log(iErr, "%s at line %d of [%.10s]", zType, lineno, 20+sqlite3_sourceid()); return iErr; } SQLITE_PRIVATE int sqlite3CorruptError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_CORRUPT, lineno, "database corruption"); + return sqlite3ReportError(SQLITE_CORRUPT, lineno, "database corruption"); } SQLITE_PRIVATE int sqlite3MisuseError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_MISUSE, lineno, "misuse"); + return sqlite3ReportError(SQLITE_MISUSE, lineno, "misuse"); } SQLITE_PRIVATE int sqlite3CantopenError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_CANTOPEN, lineno, "cannot open file"); + return sqlite3ReportError(SQLITE_CANTOPEN, lineno, "cannot open file"); } #ifdef SQLITE_DEBUG +SQLITE_PRIVATE int sqlite3CorruptPgnoError(int lineno, Pgno pgno){ + char zMsg[100]; + sqlite3_snprintf(sizeof(zMsg), zMsg, "database corruption page %d", pgno); + testcase( sqlite3GlobalConfig.xLog!=0 ); + return sqlite3ReportError(SQLITE_CORRUPT, lineno, zMsg); +} SQLITE_PRIVATE int sqlite3NomemError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_NOMEM, lineno, "OOM"); + return sqlite3ReportError(SQLITE_NOMEM, lineno, "OOM"); } SQLITE_PRIVATE int sqlite3IoerrnomemError(int lineno){ testcase( sqlite3GlobalConfig.xLog!=0 ); - return reportError(SQLITE_IOERR_NOMEM, lineno, "I/O OOM error"); + return sqlite3ReportError(SQLITE_IOERR_NOMEM, lineno, "I/O OOM error"); } #endif @@ -142903,10 +150452,8 @@ SQLITE_API int sqlite3_file_control(sqlite3 *db, const char *zDbName, int op, vo }else if( op==SQLITE_FCNTL_JOURNAL_POINTER ){ *(sqlite3_file**)pArg = sqlite3PagerJrnlFile(pPager); rc = SQLITE_OK; - }else if( fd->pMethods ){ - rc = sqlite3OsFileControl(fd, op, pArg); }else{ - rc = SQLITE_NOTFOUND; + rc = sqlite3OsFileControl(fd, op, pArg); } sqlite3BtreeLeave(pBtree); } @@ -143055,7 +150602,7 @@ SQLITE_API int sqlite3_test_control(int op, ...){ ** This action provides a run-time test to see how the ALWAYS and ** NEVER macros were defined at compile-time. ** - ** The return value is ALWAYS(X). + ** The return value is ALWAYS(X) if X is true, or 0 if X is false. ** ** The recommended test is X==2. If the return value is 2, that means ** ALWAYS() and NEVER() are both no-op pass-through macros, which is the @@ -143078,7 +150625,7 @@ SQLITE_API int sqlite3_test_control(int op, ...){ */ case SQLITE_TESTCTRL_ALWAYS: { int x = va_arg(ap,int); - rc = ALWAYS(x); + rc = x ? ALWAYS(x) : 0; break; } @@ -143127,40 +150674,6 @@ SQLITE_API int sqlite3_test_control(int op, ...){ break; } -#ifdef SQLITE_N_KEYWORD - /* sqlite3_test_control(SQLITE_TESTCTRL_ISKEYWORD, const char *zWord) - ** - ** If zWord is a keyword recognized by the parser, then return the - ** number of keywords. Or if zWord is not a keyword, return 0. - ** - ** This test feature is only available in the amalgamation since - ** the SQLITE_N_KEYWORD macro is not defined in this file if SQLite - ** is built using separate source files. - */ - case SQLITE_TESTCTRL_ISKEYWORD: { - const char *zWord = va_arg(ap, const char*); - int n = sqlite3Strlen30(zWord); - rc = (sqlite3KeywordCode((u8*)zWord, n)!=TK_ID) ? SQLITE_N_KEYWORD : 0; - break; - } -#endif - - /* sqlite3_test_control(SQLITE_TESTCTRL_SCRATCHMALLOC, sz, &pNew, pFree); - ** - ** Pass pFree into sqlite3ScratchFree(). - ** If sz>0 then allocate a scratch buffer into pNew. - */ - case SQLITE_TESTCTRL_SCRATCHMALLOC: { - void *pFree, **ppNew; - int sz; - sz = va_arg(ap, int); - ppNew = va_arg(ap, void**); - pFree = va_arg(ap, void*); - if( sz ) *ppNew = sqlite3ScratchMalloc(sz); - sqlite3ScratchFree(pFree); - break; - } - /* sqlite3_test_control(SQLITE_TESTCTRL_LOCALTIME_FAULT, int onoff); ** ** If parameter onoff is non-zero, configure the wrappers so that all @@ -143254,6 +150767,22 @@ SQLITE_API int sqlite3_test_control(int op, ...){ sqlite3_mutex_leave(db->mutex); break; } + +#if defined(YYCOVERAGE) + /* sqlite3_test_control(SQLITE_TESTCTRL_PARSER_COVERAGE, FILE *out) + ** + ** This test control (only available when SQLite is compiled with + ** -DYYCOVERAGE) writes a report onto "out" that shows all + ** state/lookahead combinations in the parser state machine + ** which are never exercised. If any state is missed, make the + ** return code SQLITE_ERROR. + */ + case SQLITE_TESTCTRL_PARSER_COVERAGE: { + FILE *out = va_arg(ap, FILE*); + if( sqlite3ParserCoverage(out) ) rc = SQLITE_ERROR; + break; + } +#endif /* defined(YYCOVERAGE) */ } va_end(ap); #endif /* SQLITE_UNTESTABLE */ @@ -143302,7 +150831,7 @@ SQLITE_API sqlite3_int64 sqlite3_uri_int64( ){ const char *z = sqlite3_uri_parameter(zFilename, zParam); sqlite3_int64 v; - if( z && sqlite3DecOrHexToI64(z, &v)==SQLITE_OK ){ + if( z && sqlite3DecOrHexToI64(z, &v)==0 ){ bDflt = v; } return bDflt; @@ -143463,6 +150992,58 @@ SQLITE_API void sqlite3_snapshot_free(sqlite3_snapshot *pSnapshot){ } #endif /* SQLITE_ENABLE_SNAPSHOT */ +#ifndef SQLITE_OMIT_COMPILEOPTION_DIAGS +/* +** Given the name of a compile-time option, return true if that option +** was used and false if not. +** +** The name can optionally begin with "SQLITE_" but the "SQLITE_" prefix +** is not required for a match. +*/ +SQLITE_API int sqlite3_compileoption_used(const char *zOptName){ + int i, n; + int nOpt; + const char **azCompileOpt; + +#if SQLITE_ENABLE_API_ARMOR + if( zOptName==0 ){ + (void)SQLITE_MISUSE_BKPT; + return 0; + } +#endif + + azCompileOpt = sqlite3CompileOptions(&nOpt); + + if( sqlite3StrNICmp(zOptName, "SQLITE_", 7)==0 ) zOptName += 7; + n = sqlite3Strlen30(zOptName); + + /* Since nOpt is normally in single digits, a linear search is + ** adequate. No need for a binary search. */ + for(i=0; i<nOpt; i++){ + if( sqlite3StrNICmp(zOptName, azCompileOpt[i], n)==0 + && sqlite3IsIdChar((unsigned char)azCompileOpt[i][n])==0 + ){ + return 1; + } + } + return 0; +} + +/* +** Return the N-th compile-time option string. If N is out of range, +** return a NULL pointer. +*/ +SQLITE_API const char *sqlite3_compileoption_get(int N){ + int nOpt; + const char **azCompileOpt; + azCompileOpt = sqlite3CompileOptions(&nOpt); + if( N>=0 && N<nOpt ){ + return azCompileOpt[N]; + } + return 0; +} +#endif /* SQLITE_OMIT_COMPILEOPTION_DIAGS */ + /************** End of main.c ************************************************/ /************** Begin file notify.c ******************************************/ /* @@ -144959,7 +152540,7 @@ SQLITE_PRIVATE int sqlite3Fts3ExprParse(sqlite3_tokenizer *, int, ); SQLITE_PRIVATE void sqlite3Fts3ExprFree(Fts3Expr *); #ifdef SQLITE_TEST -SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db); +SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db, Fts3Hash*); SQLITE_PRIVATE int sqlite3Fts3InitTerm(sqlite3 *db); #endif @@ -145055,8 +152636,9 @@ SQLITE_PRIVATE int sqlite3Fts3PutVarint(char *p, sqlite_int64 v){ ** Return the number of bytes read, or 0 on error. ** The value is stored in *v. */ -SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *p, sqlite_int64 *v){ - const char *pStart = p; +SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *pBuf, sqlite_int64 *v){ + const unsigned char *p = (const unsigned char*)pBuf; + const unsigned char *pStart = p; u32 a; u64 b; int shift; @@ -145077,8 +152659,8 @@ SQLITE_PRIVATE int sqlite3Fts3GetVarint(const char *p, sqlite_int64 *v){ } /* -** Similar to sqlite3Fts3GetVarint(), except that the output is truncated to a -** 32-bit integer before it is returned. +** Similar to sqlite3Fts3GetVarint(), except that the output is truncated to +** a non-negative 32-bit integer before it is returned. */ SQLITE_PRIVATE int sqlite3Fts3GetVarint32(const char *p, int *pi){ u32 a; @@ -145094,7 +152676,9 @@ SQLITE_PRIVATE int sqlite3Fts3GetVarint32(const char *p, int *pi){ GETVARINT_STEP(a, p, 14, 0x3FFF, 0x200000, *pi, 3); GETVARINT_STEP(a, p, 21, 0x1FFFFF, 0x10000000, *pi, 4); a = (a & 0x0FFFFFFF ); - *pi = (int)(a | ((u32)(*p & 0x0F) << 28)); + *pi = (int)(a | ((u32)(*p & 0x07) << 28)); + assert( 0==(a & 0x80000000) ); + assert( *pi>=0 ); return 5; } @@ -145924,65 +153508,66 @@ static int fts3InitVtab( break; } } - if( iOpt==SizeofArray(aFts4Opt) ){ - sqlite3Fts3ErrMsg(pzErr, "unrecognized parameter: %s", z); - rc = SQLITE_ERROR; - }else{ - switch( iOpt ){ - case 0: /* MATCHINFO */ - if( strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "fts3", 4) ){ - sqlite3Fts3ErrMsg(pzErr, "unrecognized matchinfo: %s", zVal); - rc = SQLITE_ERROR; - } - bNoDocsize = 1; - break; + switch( iOpt ){ + case 0: /* MATCHINFO */ + if( strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "fts3", 4) ){ + sqlite3Fts3ErrMsg(pzErr, "unrecognized matchinfo: %s", zVal); + rc = SQLITE_ERROR; + } + bNoDocsize = 1; + break; - case 1: /* PREFIX */ - sqlite3_free(zPrefix); - zPrefix = zVal; - zVal = 0; - break; + case 1: /* PREFIX */ + sqlite3_free(zPrefix); + zPrefix = zVal; + zVal = 0; + break; - case 2: /* COMPRESS */ - sqlite3_free(zCompress); - zCompress = zVal; - zVal = 0; - break; + case 2: /* COMPRESS */ + sqlite3_free(zCompress); + zCompress = zVal; + zVal = 0; + break; - case 3: /* UNCOMPRESS */ - sqlite3_free(zUncompress); - zUncompress = zVal; - zVal = 0; - break; + case 3: /* UNCOMPRESS */ + sqlite3_free(zUncompress); + zUncompress = zVal; + zVal = 0; + break; - case 4: /* ORDER */ - if( (strlen(zVal)!=3 || sqlite3_strnicmp(zVal, "asc", 3)) - && (strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "desc", 4)) - ){ - sqlite3Fts3ErrMsg(pzErr, "unrecognized order: %s", zVal); - rc = SQLITE_ERROR; - } - bDescIdx = (zVal[0]=='d' || zVal[0]=='D'); - break; + case 4: /* ORDER */ + if( (strlen(zVal)!=3 || sqlite3_strnicmp(zVal, "asc", 3)) + && (strlen(zVal)!=4 || sqlite3_strnicmp(zVal, "desc", 4)) + ){ + sqlite3Fts3ErrMsg(pzErr, "unrecognized order: %s", zVal); + rc = SQLITE_ERROR; + } + bDescIdx = (zVal[0]=='d' || zVal[0]=='D'); + break; - case 5: /* CONTENT */ - sqlite3_free(zContent); - zContent = zVal; - zVal = 0; - break; + case 5: /* CONTENT */ + sqlite3_free(zContent); + zContent = zVal; + zVal = 0; + break; - case 6: /* LANGUAGEID */ - assert( iOpt==6 ); - sqlite3_free(zLanguageid); - zLanguageid = zVal; - zVal = 0; - break; + case 6: /* LANGUAGEID */ + assert( iOpt==6 ); + sqlite3_free(zLanguageid); + zLanguageid = zVal; + zVal = 0; + break; - case 7: /* NOTINDEXED */ - azNotindexed[nNotindexed++] = zVal; - zVal = 0; - break; - } + case 7: /* NOTINDEXED */ + azNotindexed[nNotindexed++] = zVal; + zVal = 0; + break; + + default: + assert( iOpt==SizeofArray(aFts4Opt) ); + sqlite3Fts3ErrMsg(pzErr, "unrecognized parameter: %s", z); + rc = SQLITE_ERROR; + break; } sqlite3_free(zVal); } @@ -146103,7 +153688,9 @@ static int fts3InitVtab( char *z; int n = 0; z = (char *)sqlite3Fts3NextToken(aCol[iCol], &n); - memcpy(zCsr, z, n); + if( n>0 ){ + memcpy(zCsr, z, n); + } zCsr[n] = '\0'; sqlite3Fts3Dequote(zCsr); p->azColumn[iCol] = zCsr; @@ -146408,17 +153995,26 @@ static void fts3CursorFinalizeStmt(Fts3Cursor *pCsr){ } /* +** Free all resources currently held by the cursor passed as the only +** argument. +*/ +static void fts3ClearCursor(Fts3Cursor *pCsr){ + fts3CursorFinalizeStmt(pCsr); + sqlite3Fts3FreeDeferredTokens(pCsr); + sqlite3_free(pCsr->aDoclist); + sqlite3Fts3MIBufferFree(pCsr->pMIBuffer); + sqlite3Fts3ExprFree(pCsr->pExpr); + memset(&(&pCsr->base)[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor)); +} + +/* ** Close the cursor. For additional information see the documentation ** on the xClose method of the virtual table interface. */ static int fts3CloseMethod(sqlite3_vtab_cursor *pCursor){ Fts3Cursor *pCsr = (Fts3Cursor *)pCursor; assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); - fts3CursorFinalizeStmt(pCsr); - sqlite3Fts3ExprFree(pCsr->pExpr); - sqlite3Fts3FreeDeferredTokens(pCsr); - sqlite3_free(pCsr->aDoclist); - sqlite3Fts3MIBufferFree(pCsr->pMIBuffer); + fts3ClearCursor(pCsr); assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); sqlite3_free(pCsr); return SQLITE_OK; @@ -146444,7 +154040,7 @@ static int fts3CursorSeekStmt(Fts3Cursor *pCsr){ }else{ zSql = sqlite3_mprintf("SELECT %s WHERE rowid = ?", p->zReadExprlist); if( !zSql ) return SQLITE_NOMEM; - rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0); + rc = sqlite3_prepare_v3(p->db, zSql,-1,SQLITE_PREPARE_PERSISTENT,&pCsr->pStmt,0); sqlite3_free(zSql); } if( rc==SQLITE_OK ) pCsr->bSeekStmt = 1; @@ -146549,7 +154145,8 @@ static int fts3ScanInteriorNode( isFirstTerm = 0; zCsr += fts3GetVarint32(zCsr, &nSuffix); - if( nPrefix<0 || nSuffix<0 || &zCsr[nSuffix]>zEnd ){ + assert( nPrefix>=0 && nSuffix>=0 ); + if( &zCsr[nSuffix]>zEnd ){ rc = FTS_CORRUPT_VTAB; goto finish_scan; } @@ -147359,7 +154956,7 @@ SQLITE_PRIVATE int sqlite3Fts3FirstFilter( fts3ColumnlistCopy(0, &p); } - while( p<pEnd && *p==0x01 ){ + while( p<pEnd ){ sqlite3_int64 iCol; p++; p += sqlite3Fts3GetVarint(p, &iCol); @@ -147918,11 +155515,7 @@ static int fts3FilterMethod( assert( iIdx==nVal ); /* In case the cursor has been used before, clear it now. */ - fts3CursorFinalizeStmt(pCsr); - sqlite3_free(pCsr->aDoclist); - sqlite3Fts3MIBufferFree(pCsr->pMIBuffer); - sqlite3Fts3ExprFree(pCsr->pExpr); - memset(&pCursor[1], 0, sizeof(Fts3Cursor)-sizeof(sqlite3_vtab_cursor)); + fts3ClearCursor(pCsr); /* Set the lower and upper bounds on docids to return */ pCsr->iMinDocid = fts3DocidRange(pDocidGe, SMALLEST_INT64); @@ -147980,7 +155573,7 @@ static int fts3FilterMethod( ); } if( zSql ){ - rc = sqlite3_prepare_v2(p->db, zSql, -1, &pCsr->pStmt, 0); + rc = sqlite3_prepare_v3(p->db,zSql,-1,SQLITE_PREPARE_PERSISTENT,&pCsr->pStmt,0); sqlite3_free(zSql); }else{ rc = SQLITE_NOMEM; @@ -148001,7 +155594,12 @@ static int fts3FilterMethod( ** routine to find out if it has reached the end of a result set. */ static int fts3EofMethod(sqlite3_vtab_cursor *pCursor){ - return ((Fts3Cursor *)pCursor)->isEof; + Fts3Cursor *pCsr = (Fts3Cursor*)pCursor; + if( pCsr->isEof ){ + fts3ClearCursor(pCsr); + pCsr->isEof = 1; + } + return pCsr->isEof; } /* @@ -148039,33 +155637,37 @@ static int fts3ColumnMethod( /* The column value supplied by SQLite must be in range. */ assert( iCol>=0 && iCol<=p->nColumn+2 ); - if( iCol==p->nColumn+1 ){ - /* This call is a request for the "docid" column. Since "docid" is an - ** alias for "rowid", use the xRowid() method to obtain the value. - */ - sqlite3_result_int64(pCtx, pCsr->iPrevId); - }else if( iCol==p->nColumn ){ - /* The extra column whose name is the same as the table. - ** Return a blob which is a pointer to the cursor. */ - sqlite3_result_blob(pCtx, &pCsr, sizeof(pCsr), SQLITE_TRANSIENT); - }else if( iCol==p->nColumn+2 && pCsr->pExpr ){ - sqlite3_result_int64(pCtx, pCsr->iLangid); - }else{ - /* The requested column is either a user column (one that contains - ** indexed data), or the language-id column. */ - rc = fts3CursorSeek(0, pCsr); + switch( iCol-p->nColumn ){ + case 0: + /* The special 'table-name' column */ + sqlite3_result_pointer(pCtx, pCsr, "fts3cursor", 0); + break; - if( rc==SQLITE_OK ){ - if( iCol==p->nColumn+2 ){ - int iLangid = 0; - if( p->zLanguageid ){ - iLangid = sqlite3_column_int(pCsr->pStmt, p->nColumn+1); - } - sqlite3_result_int(pCtx, iLangid); - }else if( sqlite3_data_count(pCsr->pStmt)>(iCol+1) ){ + case 1: + /* The docid column */ + sqlite3_result_int64(pCtx, pCsr->iPrevId); + break; + + case 2: + if( pCsr->pExpr ){ + sqlite3_result_int64(pCtx, pCsr->iLangid); + break; + }else if( p->zLanguageid==0 ){ + sqlite3_result_int(pCtx, 0); + break; + }else{ + iCol = p->nColumn; + /* fall-through */ + } + + default: + /* A user column. Or, if this is a full-table scan, possibly the + ** language-id column. Seek the cursor. */ + rc = fts3CursorSeek(0, pCsr); + if( rc==SQLITE_OK && sqlite3_data_count(pCsr->pStmt)-1>iCol ){ sqlite3_result_value(pCtx, sqlite3_column_value(pCsr->pStmt, iCol+1)); } - } + break; } assert( ((Fts3Table *)pCsr->base.pVtab)->pSegments==0 ); @@ -148114,8 +155716,10 @@ static int fts3SyncMethod(sqlite3_vtab *pVtab){ const u32 nMinMerge = 64; /* Minimum amount of incr-merge work to do */ Fts3Table *p = (Fts3Table*)pVtab; - int rc = sqlite3Fts3PendingTermsFlush(p); + int rc; + i64 iLastRowid = sqlite3_last_insert_rowid(p->db); + rc = sqlite3Fts3PendingTermsFlush(p); if( rc==SQLITE_OK && p->nLeafAdd>(nMinMerge/16) && p->nAutoincrmerge && p->nAutoincrmerge!=0xff @@ -148130,6 +155734,7 @@ static int fts3SyncMethod(sqlite3_vtab *pVtab){ if( A>(int)nMinMerge ) rc = sqlite3Fts3Incrmerge(p, A, p->nAutoincrmerge); } sqlite3Fts3SegmentsClose(p); + sqlite3_set_last_insert_rowid(p->db, iLastRowid); return rc; } @@ -148142,17 +155747,11 @@ static int fts3SyncMethod(sqlite3_vtab *pVtab){ static int fts3SetHasStat(Fts3Table *p){ int rc = SQLITE_OK; if( p->bHasStat==2 ){ - const char *zFmt ="SELECT 1 FROM %Q.sqlite_master WHERE tbl_name='%q_stat'"; - char *zSql = sqlite3_mprintf(zFmt, p->zDb, p->zName); - if( zSql ){ - sqlite3_stmt *pStmt = 0; - rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, 0); - if( rc==SQLITE_OK ){ - int bHasStat = (sqlite3_step(pStmt)==SQLITE_ROW); - rc = sqlite3_finalize(pStmt); - if( rc==SQLITE_OK ) p->bHasStat = (u8)bHasStat; - } - sqlite3_free(zSql); + char *zTbl = sqlite3_mprintf("%s_stat", p->zName); + if( zTbl ){ + int res = sqlite3_table_column_metadata(p->db, p->zDb, zTbl, 0,0,0,0,0,0); + sqlite3_free(zTbl); + p->bHasStat = (res==SQLITE_OK); }else{ rc = SQLITE_NOMEM; } @@ -148259,18 +155858,17 @@ static int fts3FunctionArg( sqlite3_value *pVal, /* argv[0] passed to function */ Fts3Cursor **ppCsr /* OUT: Store cursor handle here */ ){ - Fts3Cursor *pRet; - if( sqlite3_value_type(pVal)!=SQLITE_BLOB - || sqlite3_value_bytes(pVal)!=sizeof(Fts3Cursor *) - ){ + int rc; + *ppCsr = (Fts3Cursor*)sqlite3_value_pointer(pVal, "fts3cursor"); + if( (*ppCsr)!=0 ){ + rc = SQLITE_OK; + }else{ char *zErr = sqlite3_mprintf("illegal first argument to %s", zFunc); sqlite3_result_error(pContext, zErr, -1); sqlite3_free(zErr); - return SQLITE_ERROR; + rc = SQLITE_ERROR; } - memcpy(&pRet, sqlite3_value_blob(pVal), sizeof(Fts3Cursor *)); - *ppCsr = pRet; - return SQLITE_OK; + return rc; } /* @@ -148652,12 +156250,12 @@ SQLITE_PRIVATE int sqlite3Fts3Init(sqlite3 *db){ #ifdef SQLITE_TEST if( rc==SQLITE_OK ){ - rc = sqlite3Fts3ExprInitTestInterface(db); + rc = sqlite3Fts3ExprInitTestInterface(db, pHash); } #endif /* Create the virtual table wrapper around the hash-table and overload - ** the two scalar functions. If this is successful, register the + ** the four scalar functions. If this is successful, register the ** module with sqlite. */ if( SQLITE_OK==rc @@ -149240,7 +156838,7 @@ static int fts3EvalIncrPhraseNext( ** one incremental token. In which case the bIncr flag is set. */ assert( p->bIncr==1 ); - if( p->nToken==1 && p->bIncr ){ + if( p->nToken==1 ){ rc = sqlite3Fts3MsrIncrNext(pTab, p->aToken[0].pSegcsr, &pDL->iDocid, &pDL->pList, &pDL->nList ); @@ -149473,6 +157071,7 @@ static void fts3EvalTokenCosts( ** the number of overflow pages consumed by a record B bytes in size. */ static int fts3EvalAverageDocsize(Fts3Cursor *pCsr, int *pnPage){ + int rc = SQLITE_OK; if( pCsr->nRowAvg==0 ){ /* The average document size, which is required to calculate the cost ** of each doclist, has not yet been determined. Read the required @@ -149485,7 +157084,6 @@ static int fts3EvalAverageDocsize(Fts3Cursor *pCsr, int *pnPage){ ** data stored in all rows of each column of the table, from left ** to right. */ - int rc; Fts3Table *p = (Fts3Table*)pCsr->base.pVtab; sqlite3_stmt *pStmt; sqlite3_int64 nDoc = 0; @@ -149512,11 +157110,10 @@ static int fts3EvalAverageDocsize(Fts3Cursor *pCsr, int *pnPage){ pCsr->nRowAvg = (int)(((nByte / nDoc) + p->nPgsz) / p->nPgsz); assert( pCsr->nRowAvg>0 ); rc = sqlite3_reset(pStmt); - if( rc!=SQLITE_OK ) return rc; } *pnPage = pCsr->nRowAvg; - return SQLITE_OK; + return rc; } /* @@ -149866,7 +157463,8 @@ static void fts3EvalNextRow( pExpr->iDocid = pLeft->iDocid; pExpr->bEof = (pLeft->bEof || pRight->bEof); if( pExpr->eType==FTSQUERY_NEAR && pExpr->bEof ){ - if( pRight->pPhrase && pRight->pPhrase->doclist.aAll ){ + assert( pRight->eType==FTSQUERY_PHRASE ); + if( pRight->pPhrase->doclist.aAll ){ Fts3Doclist *pDl = &pRight->pPhrase->doclist; while( *pRc==SQLITE_OK && pRight->bEof==0 ){ memset(pDl->pList, 0, pDl->nList); @@ -149895,7 +157493,7 @@ static void fts3EvalNextRow( if( pRight->bEof || (pLeft->bEof==0 && iCmp<0) ){ fts3EvalNextRow(pCsr, pLeft, pRc); - }else if( pLeft->bEof || (pRight->bEof==0 && iCmp>0) ){ + }else if( pLeft->bEof || iCmp>0 ){ fts3EvalNextRow(pCsr, pRight, pRc); }else{ fts3EvalNextRow(pCsr, pLeft, pRc); @@ -149987,7 +157585,6 @@ static int fts3EvalNearTest(Fts3Expr *pExpr, int *pRc){ */ if( *pRc==SQLITE_OK && pExpr->eType==FTSQUERY_NEAR - && pExpr->bEof==0 && (pExpr->pParent==0 || pExpr->pParent->eType!=FTSQUERY_NEAR) ){ Fts3Expr *p; @@ -149996,42 +157593,39 @@ static int fts3EvalNearTest(Fts3Expr *pExpr, int *pRc){ /* Allocate temporary working space. */ for(p=pExpr; p->pLeft; p=p->pLeft){ + assert( p->pRight->pPhrase->doclist.nList>0 ); nTmp += p->pRight->pPhrase->doclist.nList; } nTmp += p->pPhrase->doclist.nList; - if( nTmp==0 ){ + aTmp = sqlite3_malloc(nTmp*2); + if( !aTmp ){ + *pRc = SQLITE_NOMEM; res = 0; }else{ - aTmp = sqlite3_malloc(nTmp*2); - if( !aTmp ){ - *pRc = SQLITE_NOMEM; - res = 0; - }else{ - char *aPoslist = p->pPhrase->doclist.pList; - int nToken = p->pPhrase->nToken; - - for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){ - Fts3Phrase *pPhrase = p->pRight->pPhrase; - int nNear = p->nNear; - res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); - } - - aPoslist = pExpr->pRight->pPhrase->doclist.pList; - nToken = pExpr->pRight->pPhrase->nToken; - for(p=pExpr->pLeft; p && res; p=p->pLeft){ - int nNear; - Fts3Phrase *pPhrase; - assert( p->pParent && p->pParent->pLeft==p ); - nNear = p->pParent->nNear; - pPhrase = ( - p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase - ); - res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); - } + char *aPoslist = p->pPhrase->doclist.pList; + int nToken = p->pPhrase->nToken; + + for(p=p->pParent;res && p && p->eType==FTSQUERY_NEAR; p=p->pParent){ + Fts3Phrase *pPhrase = p->pRight->pPhrase; + int nNear = p->nNear; + res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); } - sqlite3_free(aTmp); + aPoslist = pExpr->pRight->pPhrase->doclist.pList; + nToken = pExpr->pRight->pPhrase->nToken; + for(p=pExpr->pLeft; p && res; p=p->pLeft){ + int nNear; + Fts3Phrase *pPhrase; + assert( p->pParent && p->pParent->pLeft==p ); + nNear = p->pParent->nNear; + pPhrase = ( + p->eType==FTSQUERY_NEAR ? p->pRight->pPhrase : p->pPhrase + ); + res = fts3EvalNearTrim(nNear, aTmp, &aPoslist, &nToken, pPhrase); + } } + + sqlite3_free(aTmp); } return res; @@ -152317,34 +159911,6 @@ SQLITE_PRIVATE void sqlite3Fts3ExprFree(Fts3Expr *pDel){ /* #include <stdio.h> */ /* -** Function to query the hash-table of tokenizers (see README.tokenizers). -*/ -static int queryTestTokenizer( - sqlite3 *db, - const char *zName, - const sqlite3_tokenizer_module **pp -){ - int rc; - sqlite3_stmt *pStmt; - const char zSql[] = "SELECT fts3_tokenizer(?)"; - - *pp = 0; - rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); - if( rc!=SQLITE_OK ){ - return rc; - } - - sqlite3_bind_text(pStmt, 1, zName, -1, SQLITE_STATIC); - if( SQLITE_ROW==sqlite3_step(pStmt) ){ - if( sqlite3_column_type(pStmt, 0)==SQLITE_BLOB ){ - memcpy((void *)pp, sqlite3_column_blob(pStmt, 0), sizeof(*pp)); - } - } - - return sqlite3_finalize(pStmt); -} - -/* ** Return a pointer to a buffer containing a text representation of the ** expression passed as the first argument. The buffer is obtained from ** sqlite3_malloc(). It is the responsibility of the caller to use @@ -152411,12 +159977,12 @@ static char *exprToString(Fts3Expr *pExpr, char *zBuf){ ** ** SELECT fts3_exprtest('simple', 'Bill col2:Bloggs', 'col1', 'col2'); */ -static void fts3ExprTest( +static void fts3ExprTestCommon( + int bRebalance, sqlite3_context *context, int argc, sqlite3_value **argv ){ - sqlite3_tokenizer_module const *pModule = 0; sqlite3_tokenizer *pTokenizer = 0; int rc; char **azCol = 0; @@ -152426,7 +159992,9 @@ static void fts3ExprTest( int ii; Fts3Expr *pExpr; char *zBuf = 0; - sqlite3 *db = sqlite3_context_db_handle(context); + Fts3Hash *pHash = (Fts3Hash*)sqlite3_user_data(context); + const char *zTokenizer = 0; + char *zErr = 0; if( argc<3 ){ sqlite3_result_error(context, @@ -152435,23 +160003,17 @@ static void fts3ExprTest( return; } - rc = queryTestTokenizer(db, - (const char *)sqlite3_value_text(argv[0]), &pModule); - if( rc==SQLITE_NOMEM ){ - sqlite3_result_error_nomem(context); - goto exprtest_out; - }else if( !pModule ){ - sqlite3_result_error(context, "No such tokenizer module", -1); - goto exprtest_out; - } - - rc = pModule->xCreate(0, 0, &pTokenizer); - assert( rc==SQLITE_NOMEM || rc==SQLITE_OK ); - if( rc==SQLITE_NOMEM ){ - sqlite3_result_error_nomem(context); - goto exprtest_out; + zTokenizer = (const char*)sqlite3_value_text(argv[0]); + rc = sqlite3Fts3InitTokenizer(pHash, zTokenizer, &pTokenizer, &zErr); + if( rc!=SQLITE_OK ){ + if( rc==SQLITE_NOMEM ){ + sqlite3_result_error_nomem(context); + }else{ + sqlite3_result_error(context, zErr, -1); + } + sqlite3_free(zErr); + return; } - pTokenizer->pModule = pModule; zExpr = (const char *)sqlite3_value_text(argv[1]); nExpr = sqlite3_value_bytes(argv[1]); @@ -152465,7 +160027,7 @@ static void fts3ExprTest( azCol[ii] = (char *)sqlite3_value_text(argv[ii+2]); } - if( sqlite3_user_data(context) ){ + if( bRebalance ){ char *zDummy = 0; rc = sqlite3Fts3ExprParse( pTokenizer, 0, azCol, 0, nCol, nCol, zExpr, nExpr, &pExpr, &zDummy @@ -152491,23 +160053,38 @@ static void fts3ExprTest( sqlite3Fts3ExprFree(pExpr); exprtest_out: - if( pModule && pTokenizer ){ - rc = pModule->xDestroy(pTokenizer); + if( pTokenizer ){ + rc = pTokenizer->pModule->xDestroy(pTokenizer); } sqlite3_free(azCol); } +static void fts3ExprTest( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + fts3ExprTestCommon(0, context, argc, argv); +} +static void fts3ExprTestRebalance( + sqlite3_context *context, + int argc, + sqlite3_value **argv +){ + fts3ExprTestCommon(1, context, argc, argv); +} + /* ** Register the query expression parser test function fts3_exprtest() ** with database connection db. */ -SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3* db){ +SQLITE_PRIVATE int sqlite3Fts3ExprInitTestInterface(sqlite3 *db, Fts3Hash *pHash){ int rc = sqlite3_create_function( - db, "fts3_exprtest", -1, SQLITE_UTF8, 0, fts3ExprTest, 0, 0 + db, "fts3_exprtest", -1, SQLITE_UTF8, (void*)pHash, fts3ExprTest, 0, 0 ); if( rc==SQLITE_OK ){ rc = sqlite3_create_function(db, "fts3_exprtest_rebalance", - -1, SQLITE_UTF8, (void *)1, fts3ExprTest, 0, 0 + -1, SQLITE_UTF8, (void*)pHash, fts3ExprTestRebalance, 0, 0 ); } return rc; @@ -155191,7 +162768,8 @@ static int fts3SqlStmt( if( !zSql ){ rc = SQLITE_NOMEM; }else{ - rc = sqlite3_prepare_v2(p->db, zSql, -1, &pStmt, NULL); + rc = sqlite3_prepare_v3(p->db, zSql, -1, SQLITE_PREPARE_PERSISTENT, + &pStmt, NULL); sqlite3_free(zSql); assert( rc==SQLITE_OK || pStmt==0 ); p->aStmt[eStmt] = pStmt; @@ -156691,6 +164269,7 @@ static int fts3WriteSegment( sqlite3_bind_blob(pStmt, 2, z, n, SQLITE_STATIC); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); + sqlite3_bind_null(pStmt, 2); } return rc; } @@ -156747,6 +164326,7 @@ static int fts3WriteSegdir( sqlite3_bind_blob(pStmt, 6, zRoot, nRoot, SQLITE_STATIC); sqlite3_step(pStmt); rc = sqlite3_reset(pStmt); + sqlite3_bind_null(pStmt, 6); } return rc; } @@ -158226,6 +165806,7 @@ static void fts3UpdateDocTotals( sqlite3_bind_blob(pStmt, 2, pBlob, nBlob, SQLITE_STATIC); sqlite3_step(pStmt); *pRC = sqlite3_reset(pStmt); + sqlite3_bind_null(pStmt, 2); sqlite3_free(a); } @@ -159414,6 +166995,7 @@ static int fts3TruncateSegment( sqlite3_bind_int(pChomp, 4, iIdx); sqlite3_step(pChomp); rc = sqlite3_reset(pChomp); + sqlite3_bind_null(pChomp, 2); } } @@ -159493,6 +167075,7 @@ static int fts3IncrmergeHintStore(Fts3Table *p, Blob *pHint){ sqlite3_bind_blob(pReplace, 2, pHint->a, pHint->n, SQLITE_STATIC); sqlite3_step(pReplace); rc = sqlite3_reset(pReplace); + sqlite3_bind_null(pReplace, 2); } return rc; @@ -159740,11 +167323,14 @@ SQLITE_PRIVATE int sqlite3Fts3Incrmerge(Fts3Table *p, int nMerge, int nMin){ ** Convert the text beginning at *pz into an integer and return ** its value. Advance *pz to point to the first character past ** the integer. +** +** This function used for parameters to merge= and incrmerge= +** commands. */ static int fts3Getint(const char **pz){ const char *z = *pz; int i = 0; - while( (*z)>='0' && (*z)<='9' ) i = 10*i + *(z++) - '0'; + while( (*z)>='0' && (*z)<='9' && i<214748363 ) i = 10*i + *(z++) - '0'; *pz = z; return i; } @@ -160304,7 +167890,6 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( ){ Fts3Table *p = (Fts3Table *)pVtab; int rc = SQLITE_OK; /* Return Code */ - int isRemove = 0; /* True for an UPDATE or DELETE */ u32 *aSzIns = 0; /* Sizes of inserted documents */ u32 *aSzDel = 0; /* Sizes of deleted documents */ int nChng = 0; /* Net change in number of documents */ @@ -160402,7 +167987,6 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( if( sqlite3_value_type(apVal[0])!=SQLITE_NULL ){ assert( sqlite3_value_type(apVal[0])==SQLITE_INTEGER ); rc = fts3DeleteByRowid(p, apVal[0], &nChng, aSzDel); - isRemove = 1; } /* If this is an INSERT or UPDATE operation, insert the new record. */ @@ -160414,7 +167998,7 @@ SQLITE_PRIVATE int sqlite3Fts3UpdateMethod( rc = FTS_CORRUPT_VTAB; } } - if( rc==SQLITE_OK && (!isRemove || *pRowid!=p->iPrevDocid ) ){ + if( rc==SQLITE_OK ){ rc = fts3PendingTermsDocid(p, 0, iLangid, *pRowid); } if( rc==SQLITE_OK ){ @@ -162310,16 +169894,16 @@ static int unicodeAddExceptions( ){ const unsigned char *z = (const unsigned char *)zIn; const unsigned char *zTerm = &z[nIn]; - int iCode; + unsigned int iCode; int nEntry = 0; assert( bAlnum==0 || bAlnum==1 ); while( z<zTerm ){ READ_UTF8(z, zTerm, iCode); - assert( (sqlite3FtsUnicodeIsalnum(iCode) & 0xFFFFFFFE)==0 ); - if( sqlite3FtsUnicodeIsalnum(iCode)!=bAlnum - && sqlite3FtsUnicodeIsdiacritic(iCode)==0 + assert( (sqlite3FtsUnicodeIsalnum((int)iCode) & 0xFFFFFFFE)==0 ); + if( sqlite3FtsUnicodeIsalnum((int)iCode)!=bAlnum + && sqlite3FtsUnicodeIsdiacritic((int)iCode)==0 ){ nEntry++; } @@ -162336,13 +169920,13 @@ static int unicodeAddExceptions( z = (const unsigned char *)zIn; while( z<zTerm ){ READ_UTF8(z, zTerm, iCode); - if( sqlite3FtsUnicodeIsalnum(iCode)!=bAlnum - && sqlite3FtsUnicodeIsdiacritic(iCode)==0 + if( sqlite3FtsUnicodeIsalnum((int)iCode)!=bAlnum + && sqlite3FtsUnicodeIsdiacritic((int)iCode)==0 ){ int i, j; - for(i=0; i<nNew && aNew[i]<iCode; i++); + for(i=0; i<nNew && aNew[i]<(int)iCode; i++); for(j=nNew; j>i; j--) aNew[j] = aNew[j-1]; - aNew[i] = iCode; + aNew[i] = (int)iCode; nNew++; } } @@ -162492,7 +170076,7 @@ static int unicodeNext( ){ unicode_cursor *pCsr = (unicode_cursor *)pC; unicode_tokenizer *p = ((unicode_tokenizer *)pCsr->base.pTokenizer); - int iCode = 0; + unsigned int iCode = 0; char *zOut; const unsigned char *z = &pCsr->aInput[pCsr->iOff]; const unsigned char *zStart = z; @@ -162504,7 +170088,7 @@ static int unicodeNext( ** the input. */ while( z<zTerm ){ READ_UTF8(z, zTerm, iCode); - if( unicodeIsAlnum(p, iCode) ) break; + if( unicodeIsAlnum(p, (int)iCode) ) break; zStart = z; } if( zStart>=zTerm ) return SQLITE_DONE; @@ -162524,7 +170108,7 @@ static int unicodeNext( /* Write the folded case of the last character read to the output */ zEnd = z; - iOut = sqlite3FtsUnicodeFold(iCode, p->bRemoveDiacritic); + iOut = sqlite3FtsUnicodeFold((int)iCode, p->bRemoveDiacritic); if( iOut ){ WRITE_UTF8(zOut, iOut); } @@ -162532,8 +170116,8 @@ static int unicodeNext( /* If the cursor is not at EOF, read the next character */ if( z>=zTerm ) break; READ_UTF8(z, zTerm, iCode); - }while( unicodeIsAlnum(p, iCode) - || sqlite3FtsUnicodeIsdiacritic(iCode) + }while( unicodeIsAlnum(p, (int)iCode) + || sqlite3FtsUnicodeIsdiacritic((int)iCode) ); /* Set the output variables and return. */ @@ -162697,9 +170281,9 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeIsalnum(int c){ 0xFFFFFFFF, 0xFC00FFFF, 0xF8000001, 0xF8000001, }; - if( c<128 ){ - return ( (aAscii[c >> 5] & (1 << (c & 0x001F)))==0 ); - }else if( c<(1<<22) ){ + if( (unsigned int)c<128 ){ + return ( (aAscii[c >> 5] & ((unsigned int)1 << (c & 0x001F)))==0 ); + }else if( (unsigned int)c<(1<<22) ){ unsigned int key = (((unsigned int)c)<<10) | 0x000003FF; int iRes = 0; int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1; @@ -162892,16 +170476,17 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){ int ret = c; - assert( c>=0 ); assert( sizeof(unsigned short)==2 && sizeof(unsigned char)==1 ); if( c<128 ){ if( c>='A' && c<='Z' ) ret = c + ('a' - 'A'); }else if( c<65536 ){ + const struct TableEntry *p; int iHi = sizeof(aEntry)/sizeof(aEntry[0]) - 1; int iLo = 0; int iRes = -1; + assert( c>aEntry[0].iCode ); while( iHi>=iLo ){ int iTest = (iHi + iLo) / 2; int cmp = (c - aEntry[iTest].iCode); @@ -162912,14 +170497,12 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){ iHi = iTest-1; } } - assert( iRes<0 || c>=aEntry[iRes].iCode ); - if( iRes>=0 ){ - const struct TableEntry *p = &aEntry[iRes]; - if( c<(p->iCode + p->nRange) && 0==(0x01 & p->flags & (p->iCode ^ c)) ){ - ret = (c + (aiOff[p->flags>>1])) & 0x0000FFFF; - assert( ret>0 ); - } + assert( iRes>=0 && c>=aEntry[iRes].iCode ); + p = &aEntry[iRes]; + if( c<(p->iCode + p->nRange) && 0==(0x01 & p->flags & (p->iCode ^ c)) ){ + ret = (c + (aiOff[p->flags>>1])) & 0x0000FFFF; + assert( ret>0 ); } if( bRemoveDiacritic ) ret = remove_diacritic(ret); @@ -162962,14 +170545,15 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){ ** ** CREATE TABLE %_node(nodeno INTEGER PRIMARY KEY, data BLOB) ** CREATE TABLE %_parent(nodeno INTEGER PRIMARY KEY, parentnode INTEGER) -** CREATE TABLE %_rowid(rowid INTEGER PRIMARY KEY, nodeno INTEGER) +** CREATE TABLE %_rowid(rowid INTEGER PRIMARY KEY, nodeno INTEGER, ...) ** ** The data for each node of the r-tree structure is stored in the %_node ** table. For each node that is not the root node of the r-tree, there is ** an entry in the %_parent table associating the node with its parent. ** And for each row of data in the table, there is an entry in the %_rowid ** table that maps from the entries rowid to the id of the node that it -** is stored on. +** is stored on. If the r-tree contains auxiliary columns, those are stored +** on the end of the %_rowid table. ** ** The root node of an r-tree always exists, even if the r-tree table is ** empty. The nodeno of the root node is always 1. All other nodes in the @@ -162990,7 +170574,8 @@ SQLITE_PRIVATE int sqlite3FtsUnicodeFold(int c, int bRemoveDiacritic){ ** child page. */ -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_RTREE) +#if !defined(SQLITE_CORE) \ + || (defined(SQLITE_ENABLE_RTREE) && !defined(SQLITE_OMIT_VIRTUALTABLE)) #ifndef SQLITE_CORE /* #include "sqlite3ext.h" */ @@ -163031,6 +170616,9 @@ typedef struct RtreeSearchPoint RtreeSearchPoint; /* The rtree may have between 1 and RTREE_MAX_DIMENSIONS dimensions. */ #define RTREE_MAX_DIMENSIONS 5 +/* Maximum number of auxiliary columns */ +#define RTREE_MAX_AUX_COLUMN 100 + /* Size of hash table Rtree.aHash. This hash table is not expected to ** ever contain very many entries, so a fixed number of buckets is ** used. @@ -163059,12 +170647,15 @@ struct Rtree { u8 eCoordType; /* RTREE_COORD_REAL32 or RTREE_COORD_INT32 */ u8 nBytesPerCell; /* Bytes consumed per cell */ u8 inWrTrans; /* True if inside write transaction */ + u8 nAux; /* # of auxiliary columns in %_rowid */ int iDepth; /* Current depth of the r-tree structure */ char *zDb; /* Name of database containing r-tree table */ char *zName; /* Name of r-tree table */ u32 nBusy; /* Current number of users of this structure */ i64 nRowEst; /* Estimated number of rows in this table */ u32 nCursor; /* Number of open cursors */ + u32 nNodeRef; /* Number RtreeNodes with positive nRef */ + char *zReadAuxSql; /* SQL for statement to read aux data */ /* List of nodes removed during a CondenseTree operation. List is ** linked together via the pointer normally used for hash chains - @@ -163091,6 +170682,9 @@ struct Rtree { sqlite3_stmt *pWriteParent; sqlite3_stmt *pDeleteParent; + /* Statement for writing to the "aux:" fields, if there are any */ + sqlite3_stmt *pWriteAux; + RtreeNode *aHash[HASHSIZE]; /* Hash table of in-memory nodes. */ }; @@ -163147,7 +170741,7 @@ struct RtreeSearchPoint { ** The smallest possible node-size is (512-64)==448 bytes. And the largest ** supported cell size is 48 bytes (8 byte rowid + ten 4 byte coordinates). ** Therefore all non-root nodes must contain at least 3 entries. Since -** 2^40 is greater than 2^64, an r-tree structure always has a depth of +** 3^40 is greater than 2^64, an r-tree structure always has a depth of ** 40 or less. */ #define RTREE_MAX_DEPTH 40 @@ -163167,6 +170761,7 @@ struct RtreeCursor { sqlite3_vtab_cursor base; /* Base class. Must be first */ u8 atEOF; /* True if at end of search */ u8 bPoint; /* True if sPoint is valid */ + u8 bAuxValid; /* True if pReadAux is valid */ int iStrategy; /* Copy of idxNum search parameter */ int nConstraint; /* Number of entries in aConstraint */ RtreeConstraint *aConstraint; /* Search constraints. */ @@ -163174,6 +170769,7 @@ struct RtreeCursor { int nPoint; /* Number of slots used in aPoint[] */ int mxLevel; /* iLevel value for root of the tree */ RtreeSearchPoint *aPoint; /* Priority queue for search points */ + sqlite3_stmt *pReadAux; /* Statement to read aux-data */ RtreeSearchPoint sPoint; /* Cached next search point */ RtreeNode *aNode[RTREE_CACHE_SZ]; /* Rtree node cache */ u32 anQueue[RTREE_MAX_DEPTH+1]; /* Number of queued entries by iLevel */ @@ -163277,14 +170873,6 @@ struct RtreeGeomCallback { void *pContext; }; - -/* -** Value for the first field of every RtreeMatchArg object. The MATCH -** operator tests that the first field of a blob operand matches this -** value to avoid operating on invalid blobs (which could cause a segfault). -*/ -#define RTREE_GEOMETRY_MAGIC 0x891245AB - /* ** An instance of this structure (in the form of a BLOB) is returned by ** the SQL functions that sqlite3_rtree_geometry_callback() and @@ -163292,7 +170880,7 @@ struct RtreeGeomCallback { ** operand to the MATCH operator of an R-Tree. */ struct RtreeMatchArg { - u32 magic; /* Always RTREE_GEOMETRY_MAGIC */ + u32 iSize; /* Size of this object */ RtreeGeomCallback cb; /* Info about the callback functions */ int nParam; /* Number of parameters to the SQL function */ sqlite3_value **apSqlParam; /* Original SQL parameter values */ @@ -163306,7 +170894,11 @@ struct RtreeMatchArg { # define MIN(x,y) ((x) > (y) ? (y) : (x)) #endif -/* What version of GCC is being used. 0 means GCC is not being used */ +/* What version of GCC is being used. 0 means GCC is not being used . +** Note that the GCC_VERSION macro will also be set correctly when using +** clang, since clang works hard to be gcc compatible. So the gcc +** optimizations will also work when compiling with clang. +*/ #ifndef GCC_VERSION #if defined(__GNUC__) && !defined(SQLITE_DISABLE_INTRINSIC) # define GCC_VERSION (__GNUC__*1000000+__GNUC_MINOR__*1000+__GNUC_PATCHLEVEL__) @@ -163315,16 +170907,6 @@ struct RtreeMatchArg { #endif #endif -/* What version of CLANG is being used. 0 means CLANG is not being used */ -#ifndef CLANG_VERSION -#if defined(__clang__) && !defined(_WIN32) && !defined(SQLITE_DISABLE_INTRINSIC) -# define CLANG_VERSION \ - (__clang_major__*1000000+__clang_minor__*1000+__clang_patchlevel__) -#else -# define CLANG_VERSION 0 -#endif -#endif - /* The testcase() macro should already be defined in the amalgamation. If ** it is not, make it a no-op. */ @@ -163375,7 +170957,7 @@ static void readCoord(u8 *p, RtreeCoord *pCoord){ assert( ((((char*)p) - (char*)0)&3)==0 ); /* p is always 4-byte aligned */ #if SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300 pCoord->u = _byteswap_ulong(*(u32*)p); -#elif SQLITE_BYTEORDER==1234 && (GCC_VERSION>=4003000 || CLANG_VERSION>=3000000) +#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000 pCoord->u = __builtin_bswap32(*(u32*)p); #elif SQLITE_BYTEORDER==4321 pCoord->u = *(u32*)p; @@ -163393,7 +170975,7 @@ static i64 readInt64(u8 *p){ u64 x; memcpy(&x, p, 8); return (i64)_byteswap_uint64(x); -#elif SQLITE_BYTEORDER==1234 && (GCC_VERSION>=4003000 || CLANG_VERSION>=3000000) +#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000 u64 x; memcpy(&x, p, 8); return (i64)__builtin_bswap64(x); @@ -163402,15 +170984,15 @@ static i64 readInt64(u8 *p){ memcpy(&x, p, 8); return x; #else - return ( - (((i64)p[0]) << 56) + - (((i64)p[1]) << 48) + - (((i64)p[2]) << 40) + - (((i64)p[3]) << 32) + - (((i64)p[4]) << 24) + - (((i64)p[5]) << 16) + - (((i64)p[6]) << 8) + - (((i64)p[7]) << 0) + return (i64)( + (((u64)p[0]) << 56) + + (((u64)p[1]) << 48) + + (((u64)p[2]) << 40) + + (((u64)p[3]) << 32) + + (((u64)p[4]) << 24) + + (((u64)p[5]) << 16) + + (((u64)p[6]) << 8) + + (((u64)p[7]) << 0) ); #endif } @@ -163429,7 +171011,7 @@ static int writeCoord(u8 *p, RtreeCoord *pCoord){ assert( ((((char*)p) - (char*)0)&3)==0 ); /* p is always 4-byte aligned */ assert( sizeof(RtreeCoord)==4 ); assert( sizeof(u32)==4 ); -#if SQLITE_BYTEORDER==1234 && (GCC_VERSION>=4003000 || CLANG_VERSION>=3000000) +#if SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000 i = __builtin_bswap32(pCoord->u); memcpy(p, &i, 4); #elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300 @@ -163448,7 +171030,7 @@ static int writeCoord(u8 *p, RtreeCoord *pCoord){ return 4; } static int writeInt64(u8 *p, i64 i){ -#if SQLITE_BYTEORDER==1234 && (GCC_VERSION>=4003000 || CLANG_VERSION>=3000000) +#if SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000 i = (i64)__builtin_bswap64((u64)i); memcpy(p, &i, 8); #elif SQLITE_BYTEORDER==1234 && MSVC_VERSION>=1300 @@ -163474,6 +171056,7 @@ static int writeInt64(u8 *p, i64 i){ */ static void nodeReference(RtreeNode *p){ if( p ){ + assert( p->nRef>0 ); p->nRef++; } } @@ -163541,6 +171124,7 @@ static RtreeNode *nodeNew(Rtree *pRtree, RtreeNode *pParent){ memset(pNode, 0, sizeof(RtreeNode) + pRtree->iNodeSize); pNode->zData = (u8 *)&pNode[1]; pNode->nRef = 1; + pRtree->nNodeRef++; pNode->pParent = pParent; pNode->isDirty = 1; nodeReference(pParent); @@ -163574,10 +171158,10 @@ static int nodeAcquire( /* Check if the requested node is already in the hash table. If so, ** increase its reference count and return it. */ - if( (pNode = nodeHashLookup(pRtree, iNode)) ){ + if( (pNode = nodeHashLookup(pRtree, iNode))!=0 ){ assert( !pParent || !pNode->pParent || pNode->pParent==pParent ); if( pParent && !pNode->pParent ){ - nodeReference(pParent); + pParent->nRef++; pNode->pParent = pParent; } pNode->nRef++; @@ -163616,6 +171200,7 @@ static int nodeAcquire( pNode->pParent = pParent; pNode->zData = (u8 *)&pNode[1]; pNode->nRef = 1; + pRtree->nNodeRef++; pNode->iNode = iNode; pNode->isDirty = 0; pNode->pNext = 0; @@ -163656,7 +171241,10 @@ static int nodeAcquire( } *ppNode = pNode; }else{ - sqlite3_free(pNode); + if( pNode ){ + pRtree->nNodeRef--; + sqlite3_free(pNode); + } *ppNode = 0; } @@ -163736,6 +171324,7 @@ static int nodeWrite(Rtree *pRtree, RtreeNode *pNode){ sqlite3_step(p); pNode->isDirty = 0; rc = sqlite3_reset(p); + sqlite3_bind_null(p, 2); if( pNode->iNode==0 && rc==SQLITE_OK ){ pNode->iNode = sqlite3_last_insert_rowid(pRtree->db); nodeHashInsert(pRtree, pNode); @@ -163752,8 +171341,10 @@ static int nodeRelease(Rtree *pRtree, RtreeNode *pNode){ int rc = SQLITE_OK; if( pNode ){ assert( pNode->nRef>0 ); + assert( pRtree->nNodeRef>0 ); pNode->nRef--; if( pNode->nRef==0 ){ + pRtree->nNodeRef--; if( pNode->iNode==1 ){ pRtree->iDepth = -1; } @@ -163870,8 +171461,9 @@ static void rtreeRelease(Rtree *pRtree){ pRtree->nBusy--; if( pRtree->nBusy==0 ){ pRtree->inWrTrans = 0; - pRtree->nCursor = 0; + assert( pRtree->nCursor==0 ); nodeBlobReset(pRtree); + assert( pRtree->nNodeRef==0 ); sqlite3_finalize(pRtree->pWriteNode); sqlite3_finalize(pRtree->pDeleteNode); sqlite3_finalize(pRtree->pReadRowid); @@ -163880,6 +171472,8 @@ static void rtreeRelease(Rtree *pRtree){ sqlite3_finalize(pRtree->pReadParent); sqlite3_finalize(pRtree->pWriteParent); sqlite3_finalize(pRtree->pDeleteParent); + sqlite3_finalize(pRtree->pWriteAux); + sqlite3_free(pRtree->zReadAuxSql); sqlite3_free(pRtree); } } @@ -163968,6 +171562,7 @@ static int rtreeClose(sqlite3_vtab_cursor *cur){ RtreeCursor *pCsr = (RtreeCursor *)cur; assert( pRtree->nCursor>0 ); freeCursorConstraints(pCsr); + sqlite3_finalize(pCsr->pReadAux); sqlite3_free(pCsr->aPoint); for(ii=0; ii<RTREE_CACHE_SZ; ii++) nodeRelease(pRtree, pCsr->aNode[ii]); sqlite3_free(pCsr); @@ -164004,7 +171599,7 @@ static int rtreeEof(sqlite3_vtab_cursor *cur){ c.u = _byteswap_ulong(*(u32*)a); \ r = eInt ? (sqlite3_rtree_dbl)c.i : (sqlite3_rtree_dbl)c.f; \ } -#elif SQLITE_BYTEORDER==1234 && (GCC_VERSION>=4003000 || CLANG_VERSION>=3000000) +#elif SQLITE_BYTEORDER==1234 && GCC_VERSION>=4003000 #define RTREE_DECODE_COORD(eInt, a, r) { \ RtreeCoord c; /* Coordinate decoded */ \ c.u = __builtin_bswap32(*(u32*)a); \ @@ -164339,7 +171934,7 @@ static RtreeSearchPoint *rtreeSearchPointNew( if( ii<RTREE_CACHE_SZ ){ assert( pCur->aNode[ii]==0 ); pCur->aNode[ii] = pCur->aNode[0]; - }else{ + }else{ nodeRelease(RTREE_OF_CURSOR(pCur), pCur->aNode[0]); } pCur->aNode[0] = 0; @@ -164510,6 +172105,10 @@ static int rtreeNext(sqlite3_vtab_cursor *pVtabCursor){ /* Move to the next entry that matches the configured constraints. */ RTREE_QUEUE_TRACE(pCsr, "POP-Nx:"); + if( pCsr->bAuxValid ){ + pCsr->bAuxValid = 0; + sqlite3_reset(pCsr->pReadAux); + } rtreeSearchPointPop(pCsr); rc = rtreeStepToLeaf(pCsr); return rc; @@ -164544,7 +172143,7 @@ static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ if( p==0 ) return SQLITE_OK; if( i==0 ){ sqlite3_result_int64(ctx, nodeGetRowid(pRtree, pNode, p->iCell)); - }else{ + }else if( i<=pRtree->nDim2 ){ nodeGetCoord(pRtree, pNode, p->iCell, i-1, &c); #ifndef SQLITE_RTREE_INT_ONLY if( pRtree->eCoordType==RTREE_COORD_REAL32 ){ @@ -164555,7 +172154,27 @@ static int rtreeColumn(sqlite3_vtab_cursor *cur, sqlite3_context *ctx, int i){ assert( pRtree->eCoordType==RTREE_COORD_INT32 ); sqlite3_result_int(ctx, c.i); } - } + }else{ + if( !pCsr->bAuxValid ){ + if( pCsr->pReadAux==0 ){ + rc = sqlite3_prepare_v3(pRtree->db, pRtree->zReadAuxSql, -1, 0, + &pCsr->pReadAux, 0); + if( rc ) return rc; + } + sqlite3_bind_int64(pCsr->pReadAux, 1, + nodeGetRowid(pRtree, pNode, p->iCell)); + rc = sqlite3_step(pCsr->pReadAux); + if( rc==SQLITE_ROW ){ + pCsr->bAuxValid = 1; + }else{ + sqlite3_reset(pCsr->pReadAux); + if( rc==SQLITE_DONE ) rc = SQLITE_OK; + return rc; + } + } + sqlite3_result_value(ctx, + sqlite3_column_value(pCsr->pReadAux, i - pRtree->nDim2 + 1)); + } return SQLITE_OK; } @@ -164593,33 +172212,17 @@ static int findLeafNode( ** operator. */ static int deserializeGeometry(sqlite3_value *pValue, RtreeConstraint *pCons){ - RtreeMatchArg *pBlob; /* BLOB returned by geometry function */ + RtreeMatchArg *pBlob, *pSrc; /* BLOB returned by geometry function */ sqlite3_rtree_query_info *pInfo; /* Callback information */ - int nBlob; /* Size of the geometry function blob */ - int nExpected; /* Expected size of the BLOB */ - - /* Check that value is actually a blob. */ - if( sqlite3_value_type(pValue)!=SQLITE_BLOB ) return SQLITE_ERROR; - /* Check that the blob is roughly the right size. */ - nBlob = sqlite3_value_bytes(pValue); - if( nBlob<(int)sizeof(RtreeMatchArg) ){ - return SQLITE_ERROR; - } - - pInfo = (sqlite3_rtree_query_info*)sqlite3_malloc( sizeof(*pInfo)+nBlob ); + pSrc = sqlite3_value_pointer(pValue, "RtreeMatchArg"); + if( pSrc==0 ) return SQLITE_ERROR; + pInfo = (sqlite3_rtree_query_info*) + sqlite3_malloc64( sizeof(*pInfo)+pSrc->iSize ); if( !pInfo ) return SQLITE_NOMEM; memset(pInfo, 0, sizeof(*pInfo)); pBlob = (RtreeMatchArg*)&pInfo[1]; - - memcpy(pBlob, sqlite3_value_blob(pValue), nBlob); - nExpected = (int)(sizeof(RtreeMatchArg) + - pBlob->nParam*sizeof(sqlite3_value*) + - (pBlob->nParam-1)*sizeof(RtreeDValue)); - if( pBlob->magic!=RTREE_GEOMETRY_MAGIC || nBlob!=nExpected ){ - sqlite3_free(pInfo); - return SQLITE_ERROR; - } + memcpy(pBlob, pSrc, pSrc->iSize); pInfo->pContext = pBlob->cb.pContext; pInfo->nParam = pBlob->nParam; pInfo->aParam = pBlob->aParam; @@ -164649,14 +172252,17 @@ static int rtreeFilter( int ii; int rc = SQLITE_OK; int iCell = 0; + sqlite3_stmt *pStmt; rtreeReference(pRtree); /* Reset the cursor to the same state as rtreeOpen() leaves it in. */ freeCursorConstraints(pCsr); sqlite3_free(pCsr->aPoint); + pStmt = pCsr->pReadAux; memset(pCsr, 0, sizeof(RtreeCursor)); pCsr->base.pVtab = (sqlite3_vtab*)pRtree; + pCsr->pReadAux = pStmt; pCsr->iStrategy = idxNum; if( idxNum==1 ){ @@ -164819,10 +172425,14 @@ static int rtreeBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ */ pIdxInfo->estimatedCost = 30.0; pIdxInfo->estimatedRows = 1; + pIdxInfo->idxFlags = SQLITE_INDEX_SCAN_UNIQUE; return SQLITE_OK; } - if( p->usable && (p->iColumn>0 || p->op==SQLITE_INDEX_CONSTRAINT_MATCH) ){ + if( p->usable + && ((p->iColumn>0 && p->iColumn<=pRtree->nDim2) + || p->op==SQLITE_INDEX_CONSTRAINT_MATCH) + ){ u8 op; switch( p->op ){ case SQLITE_INDEX_CONSTRAINT_EQ: op = RTREE_EQ; break; @@ -164989,7 +172599,7 @@ static int ChooseLeaf( ){ int rc; int ii; - RtreeNode *pNode; + RtreeNode *pNode = 0; rc = nodeAcquire(pRtree, 1, 0, &pNode); for(ii=0; rc==SQLITE_OK && ii<(pRtree->iDepth-iHeight); ii++){ @@ -165395,7 +173005,7 @@ static int SplitNode( }else{ pLeft = pNode; pRight = nodeNew(pRtree, pLeft->pParent); - nodeReference(pLeft); + pLeft->nRef++; } if( !pLeft || !pRight ){ @@ -165821,7 +173431,7 @@ static int rtreeDeleteRowid(Rtree *pRtree, sqlite3_int64 iDelete){ int rc; /* Return code */ RtreeNode *pLeaf = 0; /* Leaf node containing record iDelete */ int iCell; /* Index of iDelete cell in pLeaf */ - RtreeNode *pRoot; /* Root node of rtree structure */ + RtreeNode *pRoot = 0; /* Root node of rtree structure */ /* Obtain a reference to the root node to initialize Rtree.iDepth */ @@ -165864,7 +173474,7 @@ static int rtreeDeleteRowid(Rtree *pRtree, sqlite3_int64 iDelete){ */ if( rc==SQLITE_OK && pRtree->iDepth>0 && NCELL(pRoot)==1 ){ int rc2; - RtreeNode *pChild; + RtreeNode *pChild = 0; i64 iChild = nodeGetRowid(pRtree, pRoot, 0); rc = nodeAcquire(pRtree, iChild, pRoot, &pChild); if( rc==SQLITE_OK ){ @@ -165885,6 +173495,7 @@ static int rtreeDeleteRowid(Rtree *pRtree, sqlite3_int64 iDelete){ rc = reinsertNodeContent(pRtree, pLeaf); } pRtree->pDeleted = pLeaf->pNext; + pRtree->nNodeRef--; sqlite3_free(pLeaf); } @@ -165981,7 +173592,7 @@ static int rtreeConstraintError(Rtree *pRtree, int iCol){ static int rtreeUpdate( sqlite3_vtab *pVtab, int nData, - sqlite3_value **azData, + sqlite3_value **aData, sqlite_int64 *pRowid ){ Rtree *pRtree = (Rtree *)pVtab; @@ -165989,6 +173600,12 @@ static int rtreeUpdate( RtreeCell cell; /* New cell to insert if nData>1 */ int bHaveRowid = 0; /* Set to 1 after new rowid is determined */ + if( pRtree->nNodeRef ){ + /* Unable to write to the btree while another cursor is reading from it, + ** since the write might do a rebalance which would disrupt the read + ** cursor. */ + return SQLITE_LOCKED_VTAB; + } rtreeReference(pRtree); assert(nData>=1); @@ -166007,8 +173624,10 @@ static int rtreeUpdate( */ if( nData>1 ){ int ii; + int nn = nData - 4; - /* Populate the cell.aCoord[] array. The first coordinate is azData[3]. + if( nn > pRtree->nDim2 ) nn = pRtree->nDim2; + /* Populate the cell.aCoord[] array. The first coordinate is aData[3]. ** ** NB: nData can only be less than nDim*2+3 if the rtree is mis-declared ** with "column" that are interpreted as table constraints. @@ -166016,13 +173635,12 @@ static int rtreeUpdate( ** This problem was discovered after years of use, so we silently ignore ** these kinds of misdeclared tables to avoid breaking any legacy. */ - assert( nData<=(pRtree->nDim2 + 3) ); #ifndef SQLITE_RTREE_INT_ONLY if( pRtree->eCoordType==RTREE_COORD_REAL32 ){ - for(ii=0; ii<nData-4; ii+=2){ - cell.aCoord[ii].f = rtreeValueDown(azData[ii+3]); - cell.aCoord[ii+1].f = rtreeValueUp(azData[ii+4]); + for(ii=0; ii<nn; ii+=2){ + cell.aCoord[ii].f = rtreeValueDown(aData[ii+3]); + cell.aCoord[ii+1].f = rtreeValueUp(aData[ii+4]); if( cell.aCoord[ii].f>cell.aCoord[ii+1].f ){ rc = rtreeConstraintError(pRtree, ii+1); goto constraint; @@ -166031,9 +173649,9 @@ static int rtreeUpdate( }else #endif { - for(ii=0; ii<nData-4; ii+=2){ - cell.aCoord[ii].i = sqlite3_value_int(azData[ii+3]); - cell.aCoord[ii+1].i = sqlite3_value_int(azData[ii+4]); + for(ii=0; ii<nn; ii+=2){ + cell.aCoord[ii].i = sqlite3_value_int(aData[ii+3]); + cell.aCoord[ii+1].i = sqlite3_value_int(aData[ii+4]); if( cell.aCoord[ii].i>cell.aCoord[ii+1].i ){ rc = rtreeConstraintError(pRtree, ii+1); goto constraint; @@ -166043,10 +173661,10 @@ static int rtreeUpdate( /* If a rowid value was supplied, check if it is already present in ** the table. If so, the constraint has failed. */ - if( sqlite3_value_type(azData[2])!=SQLITE_NULL ){ - cell.iRowid = sqlite3_value_int64(azData[2]); - if( sqlite3_value_type(azData[0])==SQLITE_NULL - || sqlite3_value_int64(azData[0])!=cell.iRowid + if( sqlite3_value_type(aData[2])!=SQLITE_NULL ){ + cell.iRowid = sqlite3_value_int64(aData[2]); + if( sqlite3_value_type(aData[0])==SQLITE_NULL + || sqlite3_value_int64(aData[0])!=cell.iRowid ){ int steprc; sqlite3_bind_int64(pRtree->pReadRowid, 1, cell.iRowid); @@ -166065,16 +173683,16 @@ static int rtreeUpdate( } } - /* If azData[0] is not an SQL NULL value, it is the rowid of a + /* If aData[0] is not an SQL NULL value, it is the rowid of a ** record to delete from the r-tree table. The following block does ** just that. */ - if( sqlite3_value_type(azData[0])!=SQLITE_NULL ){ - rc = rtreeDeleteRowid(pRtree, sqlite3_value_int64(azData[0])); + if( sqlite3_value_type(aData[0])!=SQLITE_NULL ){ + rc = rtreeDeleteRowid(pRtree, sqlite3_value_int64(aData[0])); } - /* If the azData[] array contains more than one element, elements - ** (azData[2]..azData[argc-1]) contain a new record to insert into + /* If the aData[] array contains more than one element, elements + ** (aData[2]..aData[argc-1]) contain a new record to insert into ** the r-tree structure. */ if( rc==SQLITE_OK && nData>1 ){ @@ -166099,6 +173717,16 @@ static int rtreeUpdate( rc = rc2; } } + if( pRtree->nAux ){ + sqlite3_stmt *pUp = pRtree->pWriteAux; + int jj; + sqlite3_bind_int64(pUp, 1, *pRowid); + for(jj=0; jj<pRtree->nAux; jj++){ + sqlite3_bind_value(pUp, jj+2, aData[pRtree->nDim2+3+jj]); + } + sqlite3_step(pUp); + rc = sqlite3_reset(pUp); + } } constraint: @@ -166142,12 +173770,36 @@ static int rtreeRename(sqlite3_vtab *pVtab, const char *zNewName){ , pRtree->zDb, pRtree->zName, zNewName ); if( zSql ){ + nodeBlobReset(pRtree); rc = sqlite3_exec(pRtree->db, zSql, 0, 0, 0); sqlite3_free(zSql); } return rc; } +/* +** The xSavepoint method. +** +** This module does not need to do anything to support savepoints. However, +** it uses this hook to close any open blob handle. This is done because a +** DROP TABLE command - which fortunately always opens a savepoint - cannot +** succeed if there are any open blob handles. i.e. if the blob handle were +** not closed here, the following would fail: +** +** BEGIN; +** INSERT INTO rtree... +** DROP TABLE <tablename>; -- Would fail with SQLITE_LOCKED +** COMMIT; +*/ +static int rtreeSavepoint(sqlite3_vtab *pVtab, int iSavepoint){ + Rtree *pRtree = (Rtree *)pVtab; + int iwt = pRtree->inWrTrans; + UNUSED_PARAMETER(iSavepoint); + pRtree->inWrTrans = 0; + nodeBlobReset(pRtree); + pRtree->inWrTrans = iwt; + return SQLITE_OK; +} /* ** This function populates the pRtree->nRowEst variable with an estimate @@ -166194,7 +173846,7 @@ static int rtreeQueryStat1(sqlite3 *db, Rtree *pRtree){ } static sqlite3_module rtreeModule = { - 0, /* iVersion */ + 2, /* iVersion */ rtreeCreate, /* xCreate - create a table */ rtreeConnect, /* xConnect - connect to an existing table */ rtreeBestIndex, /* xBestIndex - Determine search strategy */ @@ -166214,7 +173866,7 @@ static sqlite3_module rtreeModule = { rtreeEndTransaction, /* xRollback - rollback transaction */ 0, /* xFindFunction - function overloading */ rtreeRename, /* xRename - rename the table */ - 0, /* xSavepoint */ + rtreeSavepoint, /* xSavepoint */ 0, /* xRelease */ 0, /* xRollbackTo */ }; @@ -166231,18 +173883,18 @@ static int rtreeSqlInit( #define N_STATEMENT 8 static const char *azSql[N_STATEMENT] = { /* Write the xxx_node table */ - "INSERT OR REPLACE INTO '%q'.'%q_node' VALUES(:1, :2)", - "DELETE FROM '%q'.'%q_node' WHERE nodeno = :1", + "INSERT OR REPLACE INTO '%q'.'%q_node' VALUES(?1, ?2)", + "DELETE FROM '%q'.'%q_node' WHERE nodeno = ?1", /* Read and write the xxx_rowid table */ - "SELECT nodeno FROM '%q'.'%q_rowid' WHERE rowid = :1", - "INSERT OR REPLACE INTO '%q'.'%q_rowid' VALUES(:1, :2)", - "DELETE FROM '%q'.'%q_rowid' WHERE rowid = :1", + "SELECT nodeno FROM '%q'.'%q_rowid' WHERE rowid = ?1", + "INSERT OR REPLACE INTO '%q'.'%q_rowid' VALUES(?1, ?2)", + "DELETE FROM '%q'.'%q_rowid' WHERE rowid = ?1", /* Read and write the xxx_parent table */ - "SELECT parentnode FROM '%q'.'%q_parent' WHERE nodeno = :1", - "INSERT OR REPLACE INTO '%q'.'%q_parent' VALUES(:1, :2)", - "DELETE FROM '%q'.'%q_parent' WHERE nodeno = :1" + "SELECT parentnode FROM '%q'.'%q_parent' WHERE nodeno = ?1", + "INSERT OR REPLACE INTO '%q'.'%q_parent' VALUES(?1, ?2)", + "DELETE FROM '%q'.'%q_parent' WHERE nodeno = ?1" }; sqlite3_stmt **appStmt[N_STATEMENT]; int i; @@ -166250,14 +173902,25 @@ static int rtreeSqlInit( pRtree->db = db; if( isCreate ){ - char *zCreate = sqlite3_mprintf( -"CREATE TABLE \"%w\".\"%w_node\"(nodeno INTEGER PRIMARY KEY, data BLOB);" -"CREATE TABLE \"%w\".\"%w_rowid\"(rowid INTEGER PRIMARY KEY, nodeno INTEGER);" -"CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY," - " parentnode INTEGER);" -"INSERT INTO '%q'.'%q_node' VALUES(1, zeroblob(%d))", - zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, zDb, zPrefix, pRtree->iNodeSize - ); + char *zCreate; + sqlite3_str *p = sqlite3_str_new(db); + int ii; + sqlite3_str_appendf(p, + "CREATE TABLE \"%w\".\"%w_rowid\"(rowid INTEGER PRIMARY KEY,nodeno", + zDb, zPrefix); + for(ii=0; ii<pRtree->nAux; ii++){ + sqlite3_str_appendf(p,",a%d",ii); + } + sqlite3_str_appendf(p, + ");CREATE TABLE \"%w\".\"%w_node\"(nodeno INTEGER PRIMARY KEY,data);", + zDb, zPrefix); + sqlite3_str_appendf(p, + "CREATE TABLE \"%w\".\"%w_parent\"(nodeno INTEGER PRIMARY KEY,parentnode);", + zDb, zPrefix); + sqlite3_str_appendf(p, + "INSERT INTO \"%w\".\"%w_node\"VALUES(1,zeroblob(%d))", + zDb, zPrefix, pRtree->iNodeSize); + zCreate = sqlite3_str_finish(p); if( !zCreate ){ return SQLITE_NOMEM; } @@ -166279,14 +173942,51 @@ static int rtreeSqlInit( rc = rtreeQueryStat1(db, pRtree); for(i=0; i<N_STATEMENT && rc==SQLITE_OK; i++){ - char *zSql = sqlite3_mprintf(azSql[i], zDb, zPrefix); + char *zSql; + const char *zFormat; + if( i!=3 || pRtree->nAux==0 ){ + zFormat = azSql[i]; + }else { + /* An UPSERT is very slightly slower than REPLACE, but it is needed + ** if there are auxiliary columns */ + zFormat = "INSERT INTO\"%w\".\"%w_rowid\"(rowid,nodeno)VALUES(?1,?2)" + "ON CONFLICT(rowid)DO UPDATE SET nodeno=excluded.nodeno"; + } + zSql = sqlite3_mprintf(zFormat, zDb, zPrefix); if( zSql ){ - rc = sqlite3_prepare_v2(db, zSql, -1, appStmt[i], 0); + rc = sqlite3_prepare_v3(db, zSql, -1, SQLITE_PREPARE_PERSISTENT, + appStmt[i], 0); }else{ rc = SQLITE_NOMEM; } sqlite3_free(zSql); } + if( pRtree->nAux ){ + pRtree->zReadAuxSql = sqlite3_mprintf( + "SELECT * FROM \"%w\".\"%w_rowid\" WHERE rowid=?1", + zDb, zPrefix); + if( pRtree->zReadAuxSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + sqlite3_str *p = sqlite3_str_new(db); + int ii; + char *zSql; + sqlite3_str_appendf(p, "UPDATE \"%w\".\"%w_rowid\"SET ", zDb, zPrefix); + for(ii=0; ii<pRtree->nAux; ii++){ + if( ii ) sqlite3_str_append(p, ",", 1); + sqlite3_str_appendf(p,"a%d=?%d",ii,ii+2); + } + sqlite3_str_appendf(p, " WHERE rowid=?1"); + zSql = sqlite3_str_finish(p); + if( zSql==0 ){ + rc = SQLITE_NOMEM; + }else{ + rc = sqlite3_prepare_v3(db, zSql, -1, SQLITE_PREPARE_PERSISTENT, + &pRtree->pWriteAux, 0); + sqlite3_free(zSql); + } + } + } return rc; } @@ -166356,6 +174056,10 @@ static int getNodeSize( rc = getIntFromStmt(db, zSql, &pRtree->iNodeSize); if( rc!=SQLITE_OK ){ *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + }else if( pRtree->iNodeSize<(512-64) ){ + rc = SQLITE_CORRUPT_VTAB; + *pzErr = sqlite3_mprintf("undersize RTree blobs in \"%q_node\"", + pRtree->zName); } } @@ -166385,17 +174089,22 @@ static int rtreeInit( int nDb; /* Length of string argv[1] */ int nName; /* Length of string argv[2] */ int eCoordType = (pAux ? RTREE_COORD_INT32 : RTREE_COORD_REAL32); + sqlite3_str *pSql; + char *zSql; + int ii = 4; + int iErr; const char *aErrMsg[] = { 0, /* 0 */ "Wrong number of columns for an rtree table", /* 1 */ "Too few columns for an rtree table", /* 2 */ - "Too many columns for an rtree table" /* 3 */ + "Too many columns for an rtree table", /* 3 */ + "Auxiliary rtree columns must be last" /* 4 */ }; - int iErr = (argc<6) ? 2 : argc>(RTREE_MAX_DIMENSIONS*2+4) ? 3 : argc%2; - if( aErrMsg[iErr] ){ - *pzErr = sqlite3_mprintf("%s", aErrMsg[iErr]); + assert( RTREE_MAX_AUX_COLUMN<256 ); /* Aux columns counted by a u8 */ + if( argc>RTREE_MAX_AUX_COLUMN+3 ){ + *pzErr = sqlite3_mprintf("%s", aErrMsg[3]); return SQLITE_ERROR; } @@ -166413,53 +174122,73 @@ static int rtreeInit( pRtree->base.pModule = &rtreeModule; pRtree->zDb = (char *)&pRtree[1]; pRtree->zName = &pRtree->zDb[nDb+1]; - pRtree->nDim = (u8)((argc-4)/2); - pRtree->nDim2 = pRtree->nDim*2; - pRtree->nBytesPerCell = 8 + pRtree->nDim2*4; pRtree->eCoordType = (u8)eCoordType; memcpy(pRtree->zDb, argv[1], nDb); memcpy(pRtree->zName, argv[2], nName); - /* Figure out the node size to use. */ - rc = getNodeSize(db, pRtree, isCreate, pzErr); /* Create/Connect to the underlying relational database schema. If ** that is successful, call sqlite3_declare_vtab() to configure ** the r-tree table schema. */ - if( rc==SQLITE_OK ){ - if( (rc = rtreeSqlInit(pRtree, db, argv[1], argv[2], isCreate)) ){ - *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + pSql = sqlite3_str_new(db); + sqlite3_str_appendf(pSql, "CREATE TABLE x(%s", argv[3]); + for(ii=4; ii<argc; ii++){ + if( argv[ii][0]=='+' ){ + pRtree->nAux++; + sqlite3_str_appendf(pSql, ",%s", argv[ii]+1); + }else if( pRtree->nAux>0 ){ + break; }else{ - char *zSql = sqlite3_mprintf("CREATE TABLE x(%s", argv[3]); - char *zTmp; - int ii; - for(ii=4; zSql && ii<argc; ii++){ - zTmp = zSql; - zSql = sqlite3_mprintf("%s, %s", zTmp, argv[ii]); - sqlite3_free(zTmp); - } - if( zSql ){ - zTmp = zSql; - zSql = sqlite3_mprintf("%s);", zTmp); - sqlite3_free(zTmp); - } - if( !zSql ){ - rc = SQLITE_NOMEM; - }else if( SQLITE_OK!=(rc = sqlite3_declare_vtab(db, zSql)) ){ - *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); - } - sqlite3_free(zSql); + pRtree->nDim2++; + sqlite3_str_appendf(pSql, ",%s", argv[ii]); } } + sqlite3_str_appendf(pSql, ");"); + zSql = sqlite3_str_finish(pSql); + if( !zSql ){ + rc = SQLITE_NOMEM; + }else if( ii<argc ){ + *pzErr = sqlite3_mprintf("%s", aErrMsg[4]); + rc = SQLITE_ERROR; + }else if( SQLITE_OK!=(rc = sqlite3_declare_vtab(db, zSql)) ){ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + } + sqlite3_free(zSql); + if( rc ) goto rtreeInit_fail; + pRtree->nDim = pRtree->nDim2/2; + if( pRtree->nDim<1 ){ + iErr = 2; + }else if( pRtree->nDim2>RTREE_MAX_DIMENSIONS*2 ){ + iErr = 3; + }else if( pRtree->nDim2 % 2 ){ + iErr = 1; + }else{ + iErr = 0; + } + if( iErr ){ + *pzErr = sqlite3_mprintf("%s", aErrMsg[iErr]); + goto rtreeInit_fail; + } + pRtree->nBytesPerCell = 8 + pRtree->nDim2*4; - if( rc==SQLITE_OK ){ - *ppVtab = (sqlite3_vtab *)pRtree; - }else{ - assert( *ppVtab==0 ); - assert( pRtree->nBusy==1 ); - rtreeRelease(pRtree); + /* Figure out the node size to use. */ + rc = getNodeSize(db, pRtree, isCreate, pzErr); + if( rc ) goto rtreeInit_fail; + rc = rtreeSqlInit(pRtree, db, argv[1], argv[2], isCreate); + if( rc ){ + *pzErr = sqlite3_mprintf("%s", sqlite3_errmsg(db)); + goto rtreeInit_fail; } + + *ppVtab = (sqlite3_vtab *)pRtree; + return SQLITE_OK; + +rtreeInit_fail: + if( rc==SQLITE_OK ) rc = SQLITE_ERROR; + assert( *ppVtab==0 ); + assert( pRtree->nBusy==1 ); + rtreeRelease(pRtree); return rc; } @@ -166548,6 +174277,474 @@ static void rtreedepth(sqlite3_context *ctx, int nArg, sqlite3_value **apArg){ } /* +** Context object passed between the various routines that make up the +** implementation of integrity-check function rtreecheck(). +*/ +typedef struct RtreeCheck RtreeCheck; +struct RtreeCheck { + sqlite3 *db; /* Database handle */ + const char *zDb; /* Database containing rtree table */ + const char *zTab; /* Name of rtree table */ + int bInt; /* True for rtree_i32 table */ + int nDim; /* Number of dimensions for this rtree tbl */ + sqlite3_stmt *pGetNode; /* Statement used to retrieve nodes */ + sqlite3_stmt *aCheckMapping[2]; /* Statements to query %_parent/%_rowid */ + int nLeaf; /* Number of leaf cells in table */ + int nNonLeaf; /* Number of non-leaf cells in table */ + int rc; /* Return code */ + char *zReport; /* Message to report */ + int nErr; /* Number of lines in zReport */ +}; + +#define RTREE_CHECK_MAX_ERROR 100 + +/* +** Reset SQL statement pStmt. If the sqlite3_reset() call returns an error, +** and RtreeCheck.rc==SQLITE_OK, set RtreeCheck.rc to the error code. +*/ +static void rtreeCheckReset(RtreeCheck *pCheck, sqlite3_stmt *pStmt){ + int rc = sqlite3_reset(pStmt); + if( pCheck->rc==SQLITE_OK ) pCheck->rc = rc; +} + +/* +** The second and subsequent arguments to this function are a format string +** and printf style arguments. This function formats the string and attempts +** to compile it as an SQL statement. +** +** If successful, a pointer to the new SQL statement is returned. Otherwise, +** NULL is returned and an error code left in RtreeCheck.rc. +*/ +static sqlite3_stmt *rtreeCheckPrepare( + RtreeCheck *pCheck, /* RtreeCheck object */ + const char *zFmt, ... /* Format string and trailing args */ +){ + va_list ap; + char *z; + sqlite3_stmt *pRet = 0; + + va_start(ap, zFmt); + z = sqlite3_vmprintf(zFmt, ap); + + if( pCheck->rc==SQLITE_OK ){ + if( z==0 ){ + pCheck->rc = SQLITE_NOMEM; + }else{ + pCheck->rc = sqlite3_prepare_v2(pCheck->db, z, -1, &pRet, 0); + } + } + + sqlite3_free(z); + va_end(ap); + return pRet; +} + +/* +** The second and subsequent arguments to this function are a printf() +** style format string and arguments. This function formats the string and +** appends it to the report being accumuated in pCheck. +*/ +static void rtreeCheckAppendMsg(RtreeCheck *pCheck, const char *zFmt, ...){ + va_list ap; + va_start(ap, zFmt); + if( pCheck->rc==SQLITE_OK && pCheck->nErr<RTREE_CHECK_MAX_ERROR ){ + char *z = sqlite3_vmprintf(zFmt, ap); + if( z==0 ){ + pCheck->rc = SQLITE_NOMEM; + }else{ + pCheck->zReport = sqlite3_mprintf("%z%s%z", + pCheck->zReport, (pCheck->zReport ? "\n" : ""), z + ); + if( pCheck->zReport==0 ){ + pCheck->rc = SQLITE_NOMEM; + } + } + pCheck->nErr++; + } + va_end(ap); +} + +/* +** This function is a no-op if there is already an error code stored +** in the RtreeCheck object indicated by the first argument. NULL is +** returned in this case. +** +** Otherwise, the contents of rtree table node iNode are loaded from +** the database and copied into a buffer obtained from sqlite3_malloc(). +** If no error occurs, a pointer to the buffer is returned and (*pnNode) +** is set to the size of the buffer in bytes. +** +** Or, if an error does occur, NULL is returned and an error code left +** in the RtreeCheck object. The final value of *pnNode is undefined in +** this case. +*/ +static u8 *rtreeCheckGetNode(RtreeCheck *pCheck, i64 iNode, int *pnNode){ + u8 *pRet = 0; /* Return value */ + + assert( pCheck->rc==SQLITE_OK ); + if( pCheck->pGetNode==0 ){ + pCheck->pGetNode = rtreeCheckPrepare(pCheck, + "SELECT data FROM %Q.'%q_node' WHERE nodeno=?", + pCheck->zDb, pCheck->zTab + ); + } + + if( pCheck->rc==SQLITE_OK ){ + sqlite3_bind_int64(pCheck->pGetNode, 1, iNode); + if( sqlite3_step(pCheck->pGetNode)==SQLITE_ROW ){ + int nNode = sqlite3_column_bytes(pCheck->pGetNode, 0); + const u8 *pNode = (const u8*)sqlite3_column_blob(pCheck->pGetNode, 0); + pRet = sqlite3_malloc(nNode); + if( pRet==0 ){ + pCheck->rc = SQLITE_NOMEM; + }else{ + memcpy(pRet, pNode, nNode); + *pnNode = nNode; + } + } + rtreeCheckReset(pCheck, pCheck->pGetNode); + if( pCheck->rc==SQLITE_OK && pRet==0 ){ + rtreeCheckAppendMsg(pCheck, "Node %lld missing from database", iNode); + } + } + + return pRet; +} + +/* +** This function is used to check that the %_parent (if bLeaf==0) or %_rowid +** (if bLeaf==1) table contains a specified entry. The schemas of the +** two tables are: +** +** CREATE TABLE %_parent(nodeno INTEGER PRIMARY KEY, parentnode INTEGER) +** CREATE TABLE %_rowid(rowid INTEGER PRIMARY KEY, nodeno INTEGER, ...) +** +** In both cases, this function checks that there exists an entry with +** IPK value iKey and the second column set to iVal. +** +*/ +static void rtreeCheckMapping( + RtreeCheck *pCheck, /* RtreeCheck object */ + int bLeaf, /* True for a leaf cell, false for interior */ + i64 iKey, /* Key for mapping */ + i64 iVal /* Expected value for mapping */ +){ + int rc; + sqlite3_stmt *pStmt; + const char *azSql[2] = { + "SELECT parentnode FROM %Q.'%q_parent' WHERE nodeno=?1", + "SELECT nodeno FROM %Q.'%q_rowid' WHERE rowid=?1" + }; + + assert( bLeaf==0 || bLeaf==1 ); + if( pCheck->aCheckMapping[bLeaf]==0 ){ + pCheck->aCheckMapping[bLeaf] = rtreeCheckPrepare(pCheck, + azSql[bLeaf], pCheck->zDb, pCheck->zTab + ); + } + if( pCheck->rc!=SQLITE_OK ) return; + + pStmt = pCheck->aCheckMapping[bLeaf]; + sqlite3_bind_int64(pStmt, 1, iKey); + rc = sqlite3_step(pStmt); + if( rc==SQLITE_DONE ){ + rtreeCheckAppendMsg(pCheck, "Mapping (%lld -> %lld) missing from %s table", + iKey, iVal, (bLeaf ? "%_rowid" : "%_parent") + ); + }else if( rc==SQLITE_ROW ){ + i64 ii = sqlite3_column_int64(pStmt, 0); + if( ii!=iVal ){ + rtreeCheckAppendMsg(pCheck, + "Found (%lld -> %lld) in %s table, expected (%lld -> %lld)", + iKey, ii, (bLeaf ? "%_rowid" : "%_parent"), iKey, iVal + ); + } + } + rtreeCheckReset(pCheck, pStmt); +} + +/* +** Argument pCell points to an array of coordinates stored on an rtree page. +** This function checks that the coordinates are internally consistent (no +** x1>x2 conditions) and adds an error message to the RtreeCheck object +** if they are not. +** +** Additionally, if pParent is not NULL, then it is assumed to point to +** the array of coordinates on the parent page that bound the page +** containing pCell. In this case it is also verified that the two +** sets of coordinates are mutually consistent and an error message added +** to the RtreeCheck object if they are not. +*/ +static void rtreeCheckCellCoord( + RtreeCheck *pCheck, + i64 iNode, /* Node id to use in error messages */ + int iCell, /* Cell number to use in error messages */ + u8 *pCell, /* Pointer to cell coordinates */ + u8 *pParent /* Pointer to parent coordinates */ +){ + RtreeCoord c1, c2; + RtreeCoord p1, p2; + int i; + + for(i=0; i<pCheck->nDim; i++){ + readCoord(&pCell[4*2*i], &c1); + readCoord(&pCell[4*(2*i + 1)], &c2); + + /* printf("%e, %e\n", c1.u.f, c2.u.f); */ + if( pCheck->bInt ? c1.i>c2.i : c1.f>c2.f ){ + rtreeCheckAppendMsg(pCheck, + "Dimension %d of cell %d on node %lld is corrupt", i, iCell, iNode + ); + } + + if( pParent ){ + readCoord(&pParent[4*2*i], &p1); + readCoord(&pParent[4*(2*i + 1)], &p2); + + if( (pCheck->bInt ? c1.i<p1.i : c1.f<p1.f) + || (pCheck->bInt ? c2.i>p2.i : c2.f>p2.f) + ){ + rtreeCheckAppendMsg(pCheck, + "Dimension %d of cell %d on node %lld is corrupt relative to parent" + , i, iCell, iNode + ); + } + } + } +} + +/* +** Run rtreecheck() checks on node iNode, which is at depth iDepth within +** the r-tree structure. Argument aParent points to the array of coordinates +** that bound node iNode on the parent node. +** +** If any problems are discovered, an error message is appended to the +** report accumulated in the RtreeCheck object. +*/ +static void rtreeCheckNode( + RtreeCheck *pCheck, + int iDepth, /* Depth of iNode (0==leaf) */ + u8 *aParent, /* Buffer containing parent coords */ + i64 iNode /* Node to check */ +){ + u8 *aNode = 0; + int nNode = 0; + + assert( iNode==1 || aParent!=0 ); + assert( pCheck->nDim>0 ); + + aNode = rtreeCheckGetNode(pCheck, iNode, &nNode); + if( aNode ){ + if( nNode<4 ){ + rtreeCheckAppendMsg(pCheck, + "Node %lld is too small (%d bytes)", iNode, nNode + ); + }else{ + int nCell; /* Number of cells on page */ + int i; /* Used to iterate through cells */ + if( aParent==0 ){ + iDepth = readInt16(aNode); + if( iDepth>RTREE_MAX_DEPTH ){ + rtreeCheckAppendMsg(pCheck, "Rtree depth out of range (%d)", iDepth); + sqlite3_free(aNode); + return; + } + } + nCell = readInt16(&aNode[2]); + if( (4 + nCell*(8 + pCheck->nDim*2*4))>nNode ){ + rtreeCheckAppendMsg(pCheck, + "Node %lld is too small for cell count of %d (%d bytes)", + iNode, nCell, nNode + ); + }else{ + for(i=0; i<nCell; i++){ + u8 *pCell = &aNode[4 + i*(8 + pCheck->nDim*2*4)]; + i64 iVal = readInt64(pCell); + rtreeCheckCellCoord(pCheck, iNode, i, &pCell[8], aParent); + + if( iDepth>0 ){ + rtreeCheckMapping(pCheck, 0, iVal, iNode); + rtreeCheckNode(pCheck, iDepth-1, &pCell[8], iVal); + pCheck->nNonLeaf++; + }else{ + rtreeCheckMapping(pCheck, 1, iVal, iNode); + pCheck->nLeaf++; + } + } + } + } + sqlite3_free(aNode); + } +} + +/* +** The second argument to this function must be either "_rowid" or +** "_parent". This function checks that the number of entries in the +** %_rowid or %_parent table is exactly nExpect. If not, it adds +** an error message to the report in the RtreeCheck object indicated +** by the first argument. +*/ +static void rtreeCheckCount(RtreeCheck *pCheck, const char *zTbl, i64 nExpect){ + if( pCheck->rc==SQLITE_OK ){ + sqlite3_stmt *pCount; + pCount = rtreeCheckPrepare(pCheck, "SELECT count(*) FROM %Q.'%q%s'", + pCheck->zDb, pCheck->zTab, zTbl + ); + if( pCount ){ + if( sqlite3_step(pCount)==SQLITE_ROW ){ + i64 nActual = sqlite3_column_int64(pCount, 0); + if( nActual!=nExpect ){ + rtreeCheckAppendMsg(pCheck, "Wrong number of entries in %%%s table" + " - expected %lld, actual %lld" , zTbl, nExpect, nActual + ); + } + } + pCheck->rc = sqlite3_finalize(pCount); + } + } +} + +/* +** This function does the bulk of the work for the rtree integrity-check. +** It is called by rtreecheck(), which is the SQL function implementation. +*/ +static int rtreeCheckTable( + sqlite3 *db, /* Database handle to access db through */ + const char *zDb, /* Name of db ("main", "temp" etc.) */ + const char *zTab, /* Name of rtree table to check */ + char **pzReport /* OUT: sqlite3_malloc'd report text */ +){ + RtreeCheck check; /* Common context for various routines */ + sqlite3_stmt *pStmt = 0; /* Used to find column count of rtree table */ + int bEnd = 0; /* True if transaction should be closed */ + int nAux = 0; /* Number of extra columns. */ + + /* Initialize the context object */ + memset(&check, 0, sizeof(check)); + check.db = db; + check.zDb = zDb; + check.zTab = zTab; + + /* If there is not already an open transaction, open one now. This is + ** to ensure that the queries run as part of this integrity-check operate + ** on a consistent snapshot. */ + if( sqlite3_get_autocommit(db) ){ + check.rc = sqlite3_exec(db, "BEGIN", 0, 0, 0); + bEnd = 1; + } + + /* Find the number of auxiliary columns */ + if( check.rc==SQLITE_OK ){ + pStmt = rtreeCheckPrepare(&check, "SELECT * FROM %Q.'%q_rowid'", zDb, zTab); + if( pStmt ){ + nAux = sqlite3_column_count(pStmt) - 2; + sqlite3_finalize(pStmt); + } + check.rc = SQLITE_OK; + } + + /* Find number of dimensions in the rtree table. */ + pStmt = rtreeCheckPrepare(&check, "SELECT * FROM %Q.%Q", zDb, zTab); + if( pStmt ){ + int rc; + check.nDim = (sqlite3_column_count(pStmt) - 1 - nAux) / 2; + if( check.nDim<1 ){ + rtreeCheckAppendMsg(&check, "Schema corrupt or not an rtree"); + }else if( SQLITE_ROW==sqlite3_step(pStmt) ){ + check.bInt = (sqlite3_column_type(pStmt, 1)==SQLITE_INTEGER); + } + rc = sqlite3_finalize(pStmt); + if( rc!=SQLITE_CORRUPT ) check.rc = rc; + } + + /* Do the actual integrity-check */ + if( check.nDim>=1 ){ + if( check.rc==SQLITE_OK ){ + rtreeCheckNode(&check, 0, 0, 1); + } + rtreeCheckCount(&check, "_rowid", check.nLeaf); + rtreeCheckCount(&check, "_parent", check.nNonLeaf); + } + + /* Finalize SQL statements used by the integrity-check */ + sqlite3_finalize(check.pGetNode); + sqlite3_finalize(check.aCheckMapping[0]); + sqlite3_finalize(check.aCheckMapping[1]); + + /* If one was opened, close the transaction */ + if( bEnd ){ + int rc = sqlite3_exec(db, "END", 0, 0, 0); + if( check.rc==SQLITE_OK ) check.rc = rc; + } + *pzReport = check.zReport; + return check.rc; +} + +/* +** Usage: +** +** rtreecheck(<rtree-table>); +** rtreecheck(<database>, <rtree-table>); +** +** Invoking this SQL function runs an integrity-check on the named rtree +** table. The integrity-check verifies the following: +** +** 1. For each cell in the r-tree structure (%_node table), that: +** +** a) for each dimension, (coord1 <= coord2). +** +** b) unless the cell is on the root node, that the cell is bounded +** by the parent cell on the parent node. +** +** c) for leaf nodes, that there is an entry in the %_rowid +** table corresponding to the cell's rowid value that +** points to the correct node. +** +** d) for cells on non-leaf nodes, that there is an entry in the +** %_parent table mapping from the cell's child node to the +** node that it resides on. +** +** 2. That there are the same number of entries in the %_rowid table +** as there are leaf cells in the r-tree structure, and that there +** is a leaf cell that corresponds to each entry in the %_rowid table. +** +** 3. That there are the same number of entries in the %_parent table +** as there are non-leaf cells in the r-tree structure, and that +** there is a non-leaf cell that corresponds to each entry in the +** %_parent table. +*/ +static void rtreecheck( + sqlite3_context *ctx, + int nArg, + sqlite3_value **apArg +){ + if( nArg!=1 && nArg!=2 ){ + sqlite3_result_error(ctx, + "wrong number of arguments to function rtreecheck()", -1 + ); + }else{ + int rc; + char *zReport = 0; + const char *zDb = (const char*)sqlite3_value_text(apArg[0]); + const char *zTab; + if( nArg==1 ){ + zTab = zDb; + zDb = "main"; + }else{ + zTab = (const char*)sqlite3_value_text(apArg[1]); + } + rc = rtreeCheckTable(sqlite3_context_db_handle(ctx), zDb, zTab, &zReport); + if( rc==SQLITE_OK ){ + sqlite3_result_text(ctx, zReport ? zReport : "ok", -1, SQLITE_TRANSIENT); + }else{ + sqlite3_result_error_code(ctx, rc); + } + sqlite3_free(zReport); + } +} + + +/* ** Register the r-tree module with database handle db. This creates the ** virtual table module "rtree" and the debugging/analysis scalar ** function "rtreenode". @@ -166561,6 +174758,9 @@ SQLITE_PRIVATE int sqlite3RtreeInit(sqlite3 *db){ rc = sqlite3_create_function(db, "rtreedepth", 1, utf8, 0,rtreedepth, 0, 0); } if( rc==SQLITE_OK ){ + rc = sqlite3_create_function(db, "rtreecheck", -1, utf8, 0,rtreecheck, 0,0); + } + if( rc==SQLITE_OK ){ #ifdef SQLITE_RTREE_INT_ONLY void *c = (void *)RTREE_COORD_INT32; #else @@ -166628,7 +174828,7 @@ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){ sqlite3_result_error_nomem(ctx); }else{ int i; - pBlob->magic = RTREE_GEOMETRY_MAGIC; + pBlob->iSize = nBlob; pBlob->cb = pGeomCtx[0]; pBlob->apSqlParam = (sqlite3_value**)&pBlob->aParam[nArg]; pBlob->nParam = nArg; @@ -166645,7 +174845,7 @@ static void geomCallback(sqlite3_context *ctx, int nArg, sqlite3_value **aArg){ sqlite3_result_error_nomem(ctx); rtreeMatchArgFree(pBlob); }else{ - sqlite3_result_blob(ctx, pBlob, nBlob, rtreeMatchArgFree); + sqlite3_result_pointer(ctx, pBlob, "RtreeMatchArg", rtreeMatchArgFree); } } } @@ -166746,7 +174946,9 @@ SQLITE_API int sqlite3_rtree_init( ** provide case-independent matching. */ -#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) +#if !defined(SQLITE_CORE) \ + || defined(SQLITE_ENABLE_ICU) \ + || defined(SQLITE_ENABLE_ICU_COLLATIONS) /* Include ICU headers */ #include <unicode/utypes.h> @@ -166764,6 +174966,26 @@ SQLITE_API int sqlite3_rtree_init( #endif /* +** This function is called when an ICU function called from within +** the implementation of an SQL scalar function returns an error. +** +** The scalar function context passed as the first argument is +** loaded with an error message based on the following two args. +*/ +static void icuFunctionError( + sqlite3_context *pCtx, /* SQLite scalar function context */ + const char *zName, /* Name of ICU function that failed */ + UErrorCode e /* Error code returned by ICU function */ +){ + char zBuf[128]; + sqlite3_snprintf(128, zBuf, "ICU error: %s(): %s", zName, u_errorName(e)); + zBuf[127] = '\0'; + sqlite3_result_error(pCtx, zBuf, -1); +} + +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) + +/* ** Maximum length (in bytes) of the pattern in a LIKE or GLOB ** operator. */ @@ -166820,15 +175042,15 @@ static int icuLikeCompare( const uint8_t *zString, /* The UTF-8 string to compare against */ const UChar32 uEsc /* The escape character */ ){ - static const int MATCH_ONE = (UChar32)'_'; - static const int MATCH_ALL = (UChar32)'%'; + static const uint32_t MATCH_ONE = (uint32_t)'_'; + static const uint32_t MATCH_ALL = (uint32_t)'%'; int prevEscape = 0; /* True if the previous character was uEsc */ while( 1 ){ /* Read (and consume) the next character from the input pattern. */ - UChar32 uPattern; + uint32_t uPattern; SQLITE_ICU_READ_UTF8(zPattern, uPattern); if( uPattern==0 ) break; @@ -166870,16 +175092,16 @@ static int icuLikeCompare( if( *zString==0 ) return 0; SQLITE_ICU_SKIP_UTF8(zString); - }else if( !prevEscape && uPattern==uEsc){ + }else if( !prevEscape && uPattern==(uint32_t)uEsc){ /* Case 3. */ prevEscape = 1; }else{ /* Case 4. */ - UChar32 uString; + uint32_t uString; SQLITE_ICU_READ_UTF8(zString, uString); - uString = u_foldCase(uString, U_FOLD_CASE_DEFAULT); - uPattern = u_foldCase(uPattern, U_FOLD_CASE_DEFAULT); + uString = (uint32_t)u_foldCase((UChar32)uString, U_FOLD_CASE_DEFAULT); + uPattern = (uint32_t)u_foldCase((UChar32)uPattern, U_FOLD_CASE_DEFAULT); if( uString!=uPattern ){ return 0; } @@ -166943,24 +175165,6 @@ static void icuLikeFunc( } /* -** This function is called when an ICU function called from within -** the implementation of an SQL scalar function returns an error. -** -** The scalar function context passed as the first argument is -** loaded with an error message based on the following two args. -*/ -static void icuFunctionError( - sqlite3_context *pCtx, /* SQLite scalar function context */ - const char *zName, /* Name of ICU function that failed */ - UErrorCode e /* Error code returned by ICU function */ -){ - char zBuf[128]; - sqlite3_snprintf(128, zBuf, "ICU error: %s(): %s", zName, u_errorName(e)); - zBuf[127] = '\0'; - sqlite3_result_error(pCtx, zBuf, -1); -} - -/* ** Function to delete compiled regexp objects. Registered as ** a destructor function with sqlite3_set_auxdata(). */ @@ -167125,6 +175329,8 @@ static void icuCaseFunc16(sqlite3_context *p, int nArg, sqlite3_value **apArg){ assert( 0 ); /* Unreachable */ } +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) */ + /* ** Collation sequence destructor function. The pCtx argument points to ** a UCollator structure previously allocated using ucol_open(). @@ -167219,6 +175425,7 @@ SQLITE_PRIVATE int sqlite3IcuInit(sqlite3 *db){ void (*xFunc)(sqlite3_context*,int,sqlite3_value**); } scalars[] = { {"icu_load_collation", 2, SQLITE_UTF8, 1, icuLoadCollation}, +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) {"regexp", 2, SQLITE_ANY|SQLITE_DETERMINISTIC, 0, icuRegexpFunc}, {"lower", 1, SQLITE_UTF16|SQLITE_DETERMINISTIC, 0, icuCaseFunc16}, {"lower", 2, SQLITE_UTF16|SQLITE_DETERMINISTIC, 0, icuCaseFunc16}, @@ -167230,10 +175437,10 @@ SQLITE_PRIVATE int sqlite3IcuInit(sqlite3 *db){ {"upper", 2, SQLITE_UTF8|SQLITE_DETERMINISTIC, 1, icuCaseFunc16}, {"like", 2, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuLikeFunc}, {"like", 3, SQLITE_UTF8|SQLITE_DETERMINISTIC, 0, icuLikeFunc}, +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_ICU) */ }; int rc = SQLITE_OK; int i; - for(i=0; rc==SQLITE_OK && i<(int)(sizeof(scalars)/sizeof(scalars[0])); i++){ const struct IcuScalar *p = &scalars[i]; @@ -167976,6 +176183,28 @@ SQLITE_API sqlite3rbu *sqlite3rbu_vacuum( ); /* +** Configure a limit for the amount of temp space that may be used by +** the RBU handle passed as the first argument. The new limit is specified +** in bytes by the second parameter. If it is positive, the limit is updated. +** If the second parameter to this function is passed zero, then the limit +** is removed entirely. If the second parameter is negative, the limit is +** not modified (this is useful for querying the current limit). +** +** In all cases the returned value is the current limit in bytes (zero +** indicates unlimited). +** +** If the temp space limit is exceeded during operation, an SQLITE_FULL +** error is returned. +*/ +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size_limit(sqlite3rbu*, sqlite3_int64); + +/* +** Return the current amount of temp file space, in bytes, currently used by +** the RBU handle passed as the only argument. +*/ +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size(sqlite3rbu*); + +/* ** Internally, each RBU connection uses a separate SQLite database ** connection to access the target and rbu update databases. This ** API allows the application direct access to these database handles. @@ -168043,10 +176272,10 @@ SQLITE_API int sqlite3rbu_savestate(sqlite3rbu *pRbu); ** ** If an error has already occurred as part of an sqlite3rbu_step() ** or sqlite3rbu_open() call, or if one occurs within this function, an -** SQLite error code is returned. Additionally, *pzErrmsg may be set to -** point to a buffer containing a utf-8 formatted English language error -** message. It is the responsibility of the caller to eventually free any -** such buffer using sqlite3_free(). +** SQLite error code is returned. Additionally, if pzErrmsg is not NULL, +** *pzErrmsg may be set to point to a buffer containing a utf-8 formatted +** English language error message. It is the responsibility of the caller to +** eventually free any such buffer using sqlite3_free(). ** ** Otherwise, if no error occurs, this function returns SQLITE_OK if the ** update has been partially applied, or SQLITE_DONE if it has been @@ -168101,7 +176330,7 @@ SQLITE_API sqlite3_int64 sqlite3rbu_progress(sqlite3rbu *pRbu); ** table exists but is not correctly populated, the value of the *pnOne ** output variable during stage 1 is undefined. */ -SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *pRbu, int *pnOne, int *pnTwo); +SQLITE_API void sqlite3rbu_bp_progress(sqlite3rbu *pRbu, int *pnOne, int*pnTwo); /* ** Obtain an indication as to the current stage of an RBU update or vacuum. @@ -168211,6 +176440,13 @@ SQLITE_API void sqlite3rbu_destroy_vfs(const char *zName); /* Maximum number of prepared UPDATE statements held by this module */ #define SQLITE_RBU_UPDATE_CACHESIZE 16 +/* Delta checksums disabled by default. Compile with -DRBU_ENABLE_DELTA_CKSUM +** to enable checksum verification. +*/ +#ifndef RBU_ENABLE_DELTA_CKSUM +# define RBU_ENABLE_DELTA_CKSUM 0 +#endif + /* ** Swap two objects of type TYPE. */ @@ -168261,6 +176497,10 @@ SQLITE_API void sqlite3rbu_destroy_vfs(const char *zName); ** ** RBU_STATE_OALSZ: ** Valid if STAGE==1. The size in bytes of the *-oal file. +** +** RBU_STATE_DATATBL: +** Only valid if STAGE==1. The RBU database name of the table +** currently being read. */ #define RBU_STATE_STAGE 1 #define RBU_STATE_TBL 2 @@ -168271,6 +176511,7 @@ SQLITE_API void sqlite3rbu_destroy_vfs(const char *zName); #define RBU_STATE_COOKIE 7 #define RBU_STATE_OALSZ 8 #define RBU_STATE_PHASEONESTEP 9 +#define RBU_STATE_DATATBL 10 #define RBU_STAGE_OAL 1 #define RBU_STAGE_MOVE 2 @@ -168313,6 +176554,7 @@ typedef sqlite3_int64 i64; struct RbuState { int eStage; char *zTbl; + char *zDataTbl; char *zIdx; i64 iWalCksum; int nRow; @@ -168471,6 +176713,7 @@ struct sqlite3rbu { RbuObjIter objiter; /* Iterator for skipping through tbl/idx */ const char *zVfsName; /* Name of automatically created rbu vfs */ rbu_file *pTargetFd; /* File handle open on target db */ + int nPagePerSector; /* Pages per sector for pTargetFd */ i64 iOalSz; i64 nPhaseOneStep; @@ -168485,6 +176728,8 @@ struct sqlite3rbu { int pgsz; u8 *aBuf; i64 iWalCksum; + i64 szTemp; /* Current size of all temp files in use */ + i64 szTempLimit; /* Total size limit for temp files */ /* Used in RBU vacuum mode only */ int nRbu; /* Number of RBU VFS in the stack */ @@ -168493,23 +176738,33 @@ struct sqlite3rbu { /* ** An rbu VFS is implemented using an instance of this structure. +** +** Variable pRbu is only non-NULL for automatically created RBU VFS objects. +** It is NULL for RBU VFS objects created explicitly using +** sqlite3rbu_create_vfs(). It is used to track the total amount of temp +** space used by the RBU handle. */ struct rbu_vfs { sqlite3_vfs base; /* rbu VFS shim methods */ sqlite3_vfs *pRealVfs; /* Underlying VFS */ sqlite3_mutex *mutex; /* Mutex to protect pMain */ + sqlite3rbu *pRbu; /* Owner RBU object */ rbu_file *pMain; /* Linked list of main db files */ }; /* ** Each file opened by an rbu VFS is represented by an instance of ** the following structure. +** +** If this is a temporary file (pRbu!=0 && flags&DELETE_ON_CLOSE), variable +** "sz" is set to the current size of the database file. */ struct rbu_file { sqlite3_file base; /* sqlite3_file methods */ sqlite3_file *pReal; /* Underlying file handle */ rbu_vfs *pRbuVfs; /* Pointer to the rbu_vfs object */ sqlite3rbu *pRbu; /* Pointer to rbu object (rbu target only) */ + i64 sz; /* Size of file in bytes (temp only) */ int openFlags; /* Flags this file was opened with */ u32 iCookie; /* Cookie value for main db files */ @@ -168572,6 +176827,7 @@ static unsigned int rbuDeltaGetInt(const char **pz, int *pLen){ return v; } +#if RBU_ENABLE_DELTA_CKSUM /* ** Compute a 32-bit checksum on the N-byte buffer. Return the result. */ @@ -168606,6 +176862,7 @@ static unsigned int rbuDeltaChecksum(const char *zIn, size_t N){ } return sum3; } +#endif /* ** Apply a delta. @@ -168636,7 +176893,7 @@ static int rbuDeltaApply( ){ unsigned int limit; unsigned int total = 0; -#ifndef FOSSIL_OMIT_DELTA_CKSUM_TEST +#if RBU_ENABLE_DELTA_CKSUM char *zOrigOut = zOut; #endif @@ -168691,7 +176948,7 @@ static int rbuDeltaApply( case ';': { zDelta++; lenDelta--; zOut[0] = 0; -#ifndef FOSSIL_OMIT_DELTA_CKSUM_TEST +#if RBU_ENABLE_DELTA_CKSUM if( cnt!=rbuDeltaChecksum(zOrigOut, total) ){ /* ERROR: bad checksum */ return -1; @@ -169899,7 +178156,7 @@ static void rbuCreateImposterTable2(sqlite3rbu *p, RbuObjIter *pIter){ int iCid = sqlite3_column_int(pXInfo, 1); int bDesc = sqlite3_column_int(pXInfo, 3); const char *zCollate = (const char*)sqlite3_column_text(pXInfo, 4); - zCols = rbuMPrintf(p, "%z%sc%d %s COLLATE %s", zCols, zComma, + zCols = rbuMPrintf(p, "%z%sc%d %s COLLATE %Q", zCols, zComma, iCid, pIter->azTblType[iCid], zCollate ); zPk = rbuMPrintf(p, "%z%sc%d%s", zPk, zComma, iCid, bDesc?" DESC":""); @@ -169960,7 +178217,7 @@ static void rbuCreateImposterTable(sqlite3rbu *p, RbuObjIter *pIter){ ** "PRIMARY KEY" to the imposter table column declaration. */ zPk = "PRIMARY KEY "; } - zSql = rbuMPrintf(p, "%z%s\"%w\" %s %sCOLLATE %s%s", + zSql = rbuMPrintf(p, "%z%s\"%w\" %s %sCOLLATE %Q%s", zSql, zComma, zCol, pIter->azTblType[iCol], zPk, zColl, (pIter->abNotNull[iCol] ? " NOT NULL" : "") ); @@ -170361,6 +178618,7 @@ static sqlite3 *rbuOpenDbhandle( static void rbuFreeState(RbuState *p){ if( p ){ sqlite3_free(p->zTbl); + sqlite3_free(p->zDataTbl); sqlite3_free(p->zIdx); sqlite3_free(p); } @@ -170431,6 +178689,10 @@ static RbuState *rbuLoadState(sqlite3rbu *p){ pRet->nPhaseOneStep = sqlite3_column_int64(pStmt, 1); break; + case RBU_STATE_DATATBL: + pRet->zDataTbl = rbuStrndup((char*)sqlite3_column_text(pStmt, 1), &rc); + break; + default: rc = SQLITE_CORRUPT; break; @@ -170735,6 +178997,23 @@ static void rbuSetupCheckpoint(sqlite3rbu *p, RbuState *pState){ if( p->nFrame==0 || (pState && pState->iWalCksum!=p->iWalCksum) ){ p->rc = SQLITE_DONE; p->eStage = RBU_STAGE_DONE; + }else{ + int nSectorSize; + sqlite3_file *pDb = p->pTargetFd->pReal; + sqlite3_file *pWal = p->pTargetFd->pWalFd->pReal; + assert( p->nPagePerSector==0 ); + nSectorSize = pDb->pMethods->xSectorSize(pDb); + if( nSectorSize>p->pgsz ){ + p->nPagePerSector = nSectorSize / p->pgsz; + }else{ + p->nPagePerSector = 1; + } + + /* Call xSync() on the wal file. This causes SQLite to sync the + ** directory in which the target database and the wal file reside, in + ** case it has not been synced since the rename() call in + ** rbuMoveOalFile(). */ + p->rc = pWal->pMethods->xSync(pWal, SQLITE_SYNC_NORMAL); } } } @@ -171188,7 +179467,8 @@ static void rbuSaveState(sqlite3rbu *p, int eStage){ "(%d, %lld), " "(%d, %lld), " "(%d, %lld), " - "(%d, %lld) ", + "(%d, %lld), " + "(%d, %Q) ", p->zStateDb, RBU_STATE_STAGE, eStage, RBU_STATE_TBL, p->objiter.zTbl, @@ -171198,7 +179478,8 @@ static void rbuSaveState(sqlite3rbu *p, int eStage){ RBU_STATE_CKPT, p->iWalCksum, RBU_STATE_COOKIE, (i64)pFd->iCookie, RBU_STATE_OALSZ, p->iOalSz, - RBU_STATE_PHASEONESTEP, p->nPhaseOneStep + RBU_STATE_PHASEONESTEP, p->nPhaseOneStep, + RBU_STATE_DATATBL, p->objiter.zDataTbl ) ); assert( pInsert==0 || rc==SQLITE_OK ); @@ -171390,9 +179671,26 @@ SQLITE_API int sqlite3rbu_step(sqlite3rbu *p){ p->rc = SQLITE_DONE; } }else{ - RbuFrame *pFrame = &p->aFrame[p->nStep]; - rbuCheckpointFrame(p, pFrame); - p->nStep++; + /* At one point the following block copied a single frame from the + ** wal file to the database file. So that one call to sqlite3rbu_step() + ** checkpointed a single frame. + ** + ** However, if the sector-size is larger than the page-size, and the + ** application calls sqlite3rbu_savestate() or close() immediately + ** after this step, then rbu_step() again, then a power failure occurs, + ** then the database page written here may be damaged. Work around + ** this by checkpointing frames until the next page in the aFrame[] + ** lies on a different disk sector to the current one. */ + u32 iSector; + do{ + RbuFrame *pFrame = &p->aFrame[p->nStep]; + iSector = (pFrame->iDbPage-1) / p->nPagePerSector; + rbuCheckpointFrame(p, pFrame); + p->nStep++; + }while( p->nStep<p->nFrame + && iSector==((p->aFrame[p->nStep].iDbPage-1) / p->nPagePerSector) + && p->rc==SQLITE_OK + ); } p->nProgress++; } @@ -171437,7 +179735,8 @@ static void rbuSetupOal(sqlite3rbu *p, RbuState *pState){ while( rc==SQLITE_OK && pIter->zTbl && (pIter->bCleanup || rbuStrCompare(pIter->zIdx, pState->zIdx) - || rbuStrCompare(pIter->zTbl, pState->zTbl) + || (pState->zDataTbl==0 && rbuStrCompare(pIter->zTbl, pState->zTbl)) + || (pState->zDataTbl && rbuStrCompare(pIter->zDataTbl, pState->zDataTbl)) )){ rc = rbuObjIterNext(p, pIter); } @@ -171489,6 +179788,7 @@ static void rbuCreateVfs(sqlite3rbu *p){ sqlite3_vfs *pVfs = sqlite3_vfs_find(zRnd); assert( pVfs ); p->zVfsName = pVfs->zName; + ((rbu_vfs*)pVfs)->pRbu = p; } } @@ -171833,6 +180133,12 @@ SQLITE_API int sqlite3rbu_close(sqlite3rbu *p, char **pzErrmsg){ p->rc = sqlite3_exec(p->dbMain, "COMMIT", 0, 0, &p->zErrmsg); } + /* Sync the db file if currently doing an incremental checkpoint */ + if( p->rc==SQLITE_OK && p->eStage==RBU_STAGE_CKPT ){ + sqlite3_file *pDb = p->pTargetFd->pReal; + p->rc = pDb->pMethods->xSync(pDb, SQLITE_SYNC_NORMAL); + } + rbuSaveState(p, p->eStage); if( p->rc==SQLITE_OK && p->eStage==RBU_STAGE_OAL ){ @@ -171855,13 +180161,18 @@ SQLITE_API int sqlite3rbu_close(sqlite3rbu *p, char **pzErrmsg){ /* Close the open database handle and VFS object. */ sqlite3_close(p->dbRbu); sqlite3_close(p->dbMain); + assert( p->szTemp==0 ); rbuDeleteVfs(p); sqlite3_free(p->aBuf); sqlite3_free(p->aFrame); rbuEditErrmsg(p); rc = p->rc; - *pzErrmsg = p->zErrmsg; + if( pzErrmsg ){ + *pzErrmsg = p->zErrmsg; + }else{ + sqlite3_free(p->zErrmsg); + } sqlite3_free(p->zState); sqlite3_free(p); }else{ @@ -171957,6 +180268,12 @@ SQLITE_API int sqlite3rbu_savestate(sqlite3rbu *p){ if( rc==SQLITE_OK ) rc = sqlite3_exec(p->dbMain, "COMMIT", 0, 0, 0); } + /* Sync the db file */ + if( rc==SQLITE_OK && p->eStage==RBU_STAGE_CKPT ){ + sqlite3_file *pDb = p->pTargetFd->pReal; + rc = pDb->pMethods->xSync(pDb, SQLITE_SYNC_NORMAL); + } + p->rc = rc; rbuSaveState(p, p->eStage); rc = p->rc; @@ -172032,6 +180349,7 @@ SQLITE_API int sqlite3rbu_savestate(sqlite3rbu *p){ */ static void rbuUnlockShm(rbu_file *p){ + assert( p->openFlags & SQLITE_OPEN_MAIN_DB ); if( p->pRbu ){ int (*xShmLock)(sqlite3_file*,int,int,int) = p->pReal->pMethods->xShmLock; int i; @@ -172045,6 +180363,18 @@ static void rbuUnlockShm(rbu_file *p){ } /* +*/ +static int rbuUpdateTempSize(rbu_file *pFd, sqlite3_int64 nNew){ + sqlite3rbu *pRbu = pFd->pRbu; + i64 nDiff = nNew - pFd->sz; + pRbu->szTemp += nDiff; + pFd->sz = nNew; + assert( pRbu->szTemp>=0 ); + if( pRbu->szTempLimit && pRbu->szTemp>pRbu->szTempLimit ) return SQLITE_FULL; + return SQLITE_OK; +} + +/* ** Close an rbu file. */ static int rbuVfsClose(sqlite3_file *pFile){ @@ -172069,6 +180399,9 @@ static int rbuVfsClose(sqlite3_file *pFile){ rbuUnlockShm(p); p->pReal->pMethods->xShmUnmap(p->pReal, 0); } + else if( (p->openFlags & SQLITE_OPEN_DELETEONCLOSE) && p->pRbu ){ + rbuUpdateTempSize(p, 0); + } /* Close the underlying file handle */ rc = p->pReal->pMethods->xClose(p->pReal); @@ -172186,11 +180519,19 @@ static int rbuVfsWrite( assert( p->openFlags & SQLITE_OPEN_MAIN_DB ); rc = rbuCaptureDbWrite(p->pRbu, iOfst); }else{ - if( pRbu && pRbu->eStage==RBU_STAGE_OAL - && (p->openFlags & SQLITE_OPEN_WAL) - && iOfst>=pRbu->iOalSz - ){ - pRbu->iOalSz = iAmt + iOfst; + if( pRbu ){ + if( pRbu->eStage==RBU_STAGE_OAL + && (p->openFlags & SQLITE_OPEN_WAL) + && iOfst>=pRbu->iOalSz + ){ + pRbu->iOalSz = iAmt + iOfst; + }else if( p->openFlags & SQLITE_OPEN_DELETEONCLOSE ){ + i64 szNew = iAmt+iOfst; + if( szNew>p->sz ){ + rc = rbuUpdateTempSize(p, szNew); + if( rc!=SQLITE_OK ) return rc; + } + } } rc = p->pReal->pMethods->xWrite(p->pReal, zBuf, iAmt, iOfst); if( rc==SQLITE_OK && iOfst==0 && (p->openFlags & SQLITE_OPEN_MAIN_DB) ){ @@ -172209,6 +180550,10 @@ static int rbuVfsWrite( */ static int rbuVfsTruncate(sqlite3_file *pFile, sqlite_int64 size){ rbu_file *p = (rbu_file*)pFile; + if( (p->openFlags & SQLITE_OPEN_DELETEONCLOSE) && p->pRbu ){ + int rc = rbuUpdateTempSize(p, size); + if( rc!=SQLITE_OK ) return rc; + } return p->pReal->pMethods->xTruncate(p->pReal, size); } @@ -172598,6 +180943,8 @@ static int rbuVfsOpen( pDb->pWalFd = pFd; } } + }else{ + pFd->pRbu = pRbuVfs->pRbu; } if( oflags & SQLITE_OPEN_MAIN_DB @@ -172674,7 +181021,9 @@ static int rbuVfsAccess( if( *pResOut ){ rc = SQLITE_CANTOPEN; }else{ - *pResOut = 1; + sqlite3_int64 sz = 0; + rc = rbuVfsFileSize(&pDb->base, &sz); + *pResOut = (sz>0); } } } @@ -172863,6 +181212,20 @@ SQLITE_API int sqlite3rbu_create_vfs(const char *zName, const char *zParent){ return rc; } +/* +** Configure the aggregate temp file size limit for this RBU handle. +*/ +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size_limit(sqlite3rbu *pRbu, sqlite3_int64 n){ + if( n>=0 ){ + pRbu->szTempLimit = n; + } + return pRbu->szTempLimit; +} + +SQLITE_API sqlite3_int64 sqlite3rbu_temp_size(sqlite3rbu *pRbu){ + return pRbu->szTemp; +} + /**************************************************************************/ @@ -173296,7 +181659,7 @@ static void statSizeAndOffset(StatCursor *pCsr){ */ fd = sqlite3PagerFile(pPager); x[0] = pCsr->iPageno; - if( fd->pMethods!=0 && sqlite3OsFileControl(fd, 230440, &x)==SQLITE_OK ){ + if( sqlite3OsFileControl(fd, 230440, &x)==SQLITE_OK ){ pCsr->iOffset = x[0]; pCsr->szPage = (int)x[1]; } @@ -173566,6 +181929,9 @@ SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3 *db){ 0, /* xRollback */ 0, /* xFindMethod */ 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ }; return sqlite3_create_module(db, "dbstat", &dbstat_module, 0); } @@ -173574,6 +181940,420 @@ SQLITE_PRIVATE int sqlite3DbstatRegister(sqlite3 *db){ return SQLITE_OK; } #endif /* SQLITE_ENABLE_DBSTAT_VTAB */ /************** End of dbstat.c **********************************************/ +/************** Begin file dbpage.c ******************************************/ +/* +** 2017-10-11 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +****************************************************************************** +** +** This file contains an implementation of the "sqlite_dbpage" virtual table. +** +** The sqlite_dbpage virtual table is used to read or write whole raw +** pages of the database file. The pager interface is used so that +** uncommitted changes and changes recorded in the WAL file are correctly +** retrieved. +** +** Usage example: +** +** SELECT data FROM sqlite_dbpage('aux1') WHERE pgno=123; +** +** This is an eponymous virtual table so it does not need to be created before +** use. The optional argument to the sqlite_dbpage() table name is the +** schema for the database file that is to be read. The default schema is +** "main". +** +** The data field of sqlite_dbpage table can be updated. The new +** value must be a BLOB which is the correct page size, otherwise the +** update fails. Rows may not be deleted or inserted. +*/ + +/* #include "sqliteInt.h" ** Requires access to internal data structures ** */ +#if (defined(SQLITE_ENABLE_DBPAGE_VTAB) || defined(SQLITE_TEST)) \ + && !defined(SQLITE_OMIT_VIRTUALTABLE) + +typedef struct DbpageTable DbpageTable; +typedef struct DbpageCursor DbpageCursor; + +struct DbpageCursor { + sqlite3_vtab_cursor base; /* Base class. Must be first */ + int pgno; /* Current page number */ + int mxPgno; /* Last page to visit on this scan */ + Pager *pPager; /* Pager being read/written */ + DbPage *pPage1; /* Page 1 of the database */ + int iDb; /* Index of database to analyze */ + int szPage; /* Size of each page in bytes */ +}; + +struct DbpageTable { + sqlite3_vtab base; /* Base class. Must be first */ + sqlite3 *db; /* The database */ +}; + +/* Columns */ +#define DBPAGE_COLUMN_PGNO 0 +#define DBPAGE_COLUMN_DATA 1 +#define DBPAGE_COLUMN_SCHEMA 2 + + + +/* +** Connect to or create a dbpagevfs virtual table. +*/ +static int dbpageConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + DbpageTable *pTab = 0; + int rc = SQLITE_OK; + + rc = sqlite3_declare_vtab(db, + "CREATE TABLE x(pgno INTEGER PRIMARY KEY, data BLOB, schema HIDDEN)"); + if( rc==SQLITE_OK ){ + pTab = (DbpageTable *)sqlite3_malloc64(sizeof(DbpageTable)); + if( pTab==0 ) rc = SQLITE_NOMEM_BKPT; + } + + assert( rc==SQLITE_OK || pTab==0 ); + if( rc==SQLITE_OK ){ + memset(pTab, 0, sizeof(DbpageTable)); + pTab->db = db; + } + + *ppVtab = (sqlite3_vtab*)pTab; + return rc; +} + +/* +** Disconnect from or destroy a dbpagevfs virtual table. +*/ +static int dbpageDisconnect(sqlite3_vtab *pVtab){ + sqlite3_free(pVtab); + return SQLITE_OK; +} + +/* +** idxNum: +** +** 0 schema=main, full table scan +** 1 schema=main, pgno=?1 +** 2 schema=?1, full table scan +** 3 schema=?1, pgno=?2 +*/ +static int dbpageBestIndex(sqlite3_vtab *tab, sqlite3_index_info *pIdxInfo){ + int i; + int iPlan = 0; + + /* If there is a schema= constraint, it must be honored. Report a + ** ridiculously large estimated cost if the schema= constraint is + ** unavailable + */ + for(i=0; i<pIdxInfo->nConstraint; i++){ + struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[i]; + if( p->iColumn!=DBPAGE_COLUMN_SCHEMA ) continue; + if( p->op!=SQLITE_INDEX_CONSTRAINT_EQ ) continue; + if( !p->usable ){ + /* No solution. Use the default SQLITE_BIG_DBL cost */ + pIdxInfo->estimatedRows = 0x7fffffff; + return SQLITE_OK; + } + iPlan = 2; + pIdxInfo->aConstraintUsage[i].argvIndex = 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + break; + } + + /* If we reach this point, it means that either there is no schema= + ** constraint (in which case we use the "main" schema) or else the + ** schema constraint was accepted. Lower the estimated cost accordingly + */ + pIdxInfo->estimatedCost = 1.0e6; + + /* Check for constraints against pgno */ + for(i=0; i<pIdxInfo->nConstraint; i++){ + struct sqlite3_index_constraint *p = &pIdxInfo->aConstraint[i]; + if( p->usable && p->iColumn<=0 && p->op==SQLITE_INDEX_CONSTRAINT_EQ ){ + pIdxInfo->estimatedRows = 1; + pIdxInfo->idxFlags = SQLITE_INDEX_SCAN_UNIQUE; + pIdxInfo->estimatedCost = 1.0; + pIdxInfo->aConstraintUsage[i].argvIndex = iPlan ? 2 : 1; + pIdxInfo->aConstraintUsage[i].omit = 1; + iPlan |= 1; + break; + } + } + pIdxInfo->idxNum = iPlan; + + if( pIdxInfo->nOrderBy>=1 + && pIdxInfo->aOrderBy[0].iColumn<=0 + && pIdxInfo->aOrderBy[0].desc==0 + ){ + pIdxInfo->orderByConsumed = 1; + } + return SQLITE_OK; +} + +/* +** Open a new dbpagevfs cursor. +*/ +static int dbpageOpen(sqlite3_vtab *pVTab, sqlite3_vtab_cursor **ppCursor){ + DbpageCursor *pCsr; + + pCsr = (DbpageCursor *)sqlite3_malloc64(sizeof(DbpageCursor)); + if( pCsr==0 ){ + return SQLITE_NOMEM_BKPT; + }else{ + memset(pCsr, 0, sizeof(DbpageCursor)); + pCsr->base.pVtab = pVTab; + pCsr->pgno = -1; + } + + *ppCursor = (sqlite3_vtab_cursor *)pCsr; + return SQLITE_OK; +} + +/* +** Close a dbpagevfs cursor. +*/ +static int dbpageClose(sqlite3_vtab_cursor *pCursor){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + if( pCsr->pPage1 ) sqlite3PagerUnrefPageOne(pCsr->pPage1); + sqlite3_free(pCsr); + return SQLITE_OK; +} + +/* +** Move a dbpagevfs cursor to the next entry in the file. +*/ +static int dbpageNext(sqlite3_vtab_cursor *pCursor){ + int rc = SQLITE_OK; + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + pCsr->pgno++; + return rc; +} + +static int dbpageEof(sqlite3_vtab_cursor *pCursor){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + return pCsr->pgno > pCsr->mxPgno; +} + +/* +** idxNum: +** +** 0 schema=main, full table scan +** 1 schema=main, pgno=?1 +** 2 schema=?1, full table scan +** 3 schema=?1, pgno=?2 +** +** idxStr is not used +*/ +static int dbpageFilter( + sqlite3_vtab_cursor *pCursor, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + DbpageTable *pTab = (DbpageTable *)pCursor->pVtab; + int rc; + sqlite3 *db = pTab->db; + Btree *pBt; + + /* Default setting is no rows of result */ + pCsr->pgno = 1; + pCsr->mxPgno = 0; + + if( idxNum & 2 ){ + const char *zSchema; + assert( argc>=1 ); + zSchema = (const char*)sqlite3_value_text(argv[0]); + pCsr->iDb = sqlite3FindDbName(db, zSchema); + if( pCsr->iDb<0 ) return SQLITE_OK; + }else{ + pCsr->iDb = 0; + } + pBt = db->aDb[pCsr->iDb].pBt; + if( pBt==0 ) return SQLITE_OK; + pCsr->pPager = sqlite3BtreePager(pBt); + pCsr->szPage = sqlite3BtreeGetPageSize(pBt); + pCsr->mxPgno = sqlite3BtreeLastPage(pBt); + if( idxNum & 1 ){ + assert( argc>(idxNum>>1) ); + pCsr->pgno = sqlite3_value_int(argv[idxNum>>1]); + if( pCsr->pgno<1 || pCsr->pgno>pCsr->mxPgno ){ + pCsr->pgno = 1; + pCsr->mxPgno = 0; + }else{ + pCsr->mxPgno = pCsr->pgno; + } + }else{ + assert( pCsr->pgno==1 ); + } + if( pCsr->pPage1 ) sqlite3PagerUnrefPageOne(pCsr->pPage1); + rc = sqlite3PagerGet(pCsr->pPager, 1, &pCsr->pPage1, 0); + return rc; +} + +static int dbpageColumn( + sqlite3_vtab_cursor *pCursor, + sqlite3_context *ctx, + int i +){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + int rc = SQLITE_OK; + switch( i ){ + case 0: { /* pgno */ + sqlite3_result_int(ctx, pCsr->pgno); + break; + } + case 1: { /* data */ + DbPage *pDbPage = 0; + rc = sqlite3PagerGet(pCsr->pPager, pCsr->pgno, (DbPage**)&pDbPage, 0); + if( rc==SQLITE_OK ){ + sqlite3_result_blob(ctx, sqlite3PagerGetData(pDbPage), pCsr->szPage, + SQLITE_TRANSIENT); + } + sqlite3PagerUnref(pDbPage); + break; + } + default: { /* schema */ + sqlite3 *db = sqlite3_context_db_handle(ctx); + sqlite3_result_text(ctx, db->aDb[pCsr->iDb].zDbSName, -1, SQLITE_STATIC); + break; + } + } + return SQLITE_OK; +} + +static int dbpageRowid(sqlite3_vtab_cursor *pCursor, sqlite_int64 *pRowid){ + DbpageCursor *pCsr = (DbpageCursor *)pCursor; + *pRowid = pCsr->pgno; + return SQLITE_OK; +} + +static int dbpageUpdate( + sqlite3_vtab *pVtab, + int argc, + sqlite3_value **argv, + sqlite_int64 *pRowid +){ + DbpageTable *pTab = (DbpageTable *)pVtab; + Pgno pgno; + DbPage *pDbPage = 0; + int rc = SQLITE_OK; + char *zErr = 0; + const char *zSchema; + int iDb; + Btree *pBt; + Pager *pPager; + int szPage; + + if( argc==1 ){ + zErr = "cannot delete"; + goto update_fail; + } + pgno = sqlite3_value_int(argv[0]); + if( (Pgno)sqlite3_value_int(argv[1])!=pgno ){ + zErr = "cannot insert"; + goto update_fail; + } + zSchema = (const char*)sqlite3_value_text(argv[4]); + iDb = zSchema ? sqlite3FindDbName(pTab->db, zSchema) : -1; + if( iDb<0 ){ + zErr = "no such schema"; + goto update_fail; + } + pBt = pTab->db->aDb[iDb].pBt; + if( pgno<1 || pBt==0 || pgno>(int)sqlite3BtreeLastPage(pBt) ){ + zErr = "bad page number"; + goto update_fail; + } + szPage = sqlite3BtreeGetPageSize(pBt); + if( sqlite3_value_type(argv[3])!=SQLITE_BLOB + || sqlite3_value_bytes(argv[3])!=szPage + ){ + zErr = "bad page value"; + goto update_fail; + } + pPager = sqlite3BtreePager(pBt); + rc = sqlite3PagerGet(pPager, pgno, (DbPage**)&pDbPage, 0); + if( rc==SQLITE_OK ){ + rc = sqlite3PagerWrite(pDbPage); + if( rc==SQLITE_OK ){ + memcpy(sqlite3PagerGetData(pDbPage), + sqlite3_value_blob(argv[3]), + szPage); + } + } + sqlite3PagerUnref(pDbPage); + return rc; + +update_fail: + sqlite3_free(pVtab->zErrMsg); + pVtab->zErrMsg = sqlite3_mprintf("%s", zErr); + return SQLITE_ERROR; +} + +/* Since we do not know in advance which database files will be +** written by the sqlite_dbpage virtual table, start a write transaction +** on them all. +*/ +static int dbpageBegin(sqlite3_vtab *pVtab){ + DbpageTable *pTab = (DbpageTable *)pVtab; + sqlite3 *db = pTab->db; + int i; + for(i=0; i<db->nDb; i++){ + Btree *pBt = db->aDb[i].pBt; + if( pBt ) sqlite3BtreeBeginTrans(pBt, 1); + } + return SQLITE_OK; +} + + +/* +** Invoke this routine to register the "dbpage" virtual table module +*/ +SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3 *db){ + static sqlite3_module dbpage_module = { + 0, /* iVersion */ + dbpageConnect, /* xCreate */ + dbpageConnect, /* xConnect */ + dbpageBestIndex, /* xBestIndex */ + dbpageDisconnect, /* xDisconnect */ + dbpageDisconnect, /* xDestroy */ + dbpageOpen, /* xOpen - open a cursor */ + dbpageClose, /* xClose - close a cursor */ + dbpageFilter, /* xFilter - configure scan constraints */ + dbpageNext, /* xNext - advance a cursor */ + dbpageEof, /* xEof - check for end of scan */ + dbpageColumn, /* xColumn - read data */ + dbpageRowid, /* xRowid - read data */ + dbpageUpdate, /* xUpdate */ + dbpageBegin, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ + }; + return sqlite3_create_module(db, "sqlite_dbpage", &dbpage_module, 0); +} +#elif defined(SQLITE_ENABLE_DBPAGE_VTAB) +SQLITE_PRIVATE int sqlite3DbpageRegister(sqlite3 *db){ return SQLITE_OK; } +#endif /* SQLITE_ENABLE_DBSTAT_VTAB */ + +/************** End of dbpage.c **********************************************/ /************** Begin file sqlite3session.c **********************************/ #if defined(SQLITE_ENABLE_SESSION) && defined(SQLITE_ENABLE_PREUPDATE_HOOK) @@ -173623,6 +182403,7 @@ struct sqlite3_session { int rc; /* Non-zero if an error has occurred */ void *pFilterCtx; /* First argument to pass to xTableFilter */ int (*xTableFilter)(void *pCtx, const char *zTab); + sqlite3_value *pZeroBlob; /* Value containing X'' */ sqlite3_session *pNext; /* Next session object on same db. */ SessionTable *pTable; /* List of attached tables */ SessionHook hook; /* APIs to grab new and old data with */ @@ -173644,7 +182425,7 @@ struct SessionBuffer { ** sqlite3changeset_start_strm()). */ struct SessionInput { - int bNoDiscard; /* If true, discard no data */ + int bNoDiscard; /* If true, do not discard in InputBuffer() */ int iCurrent; /* Offset in aData[] of current change */ int iNext; /* Offset in aData[] of next change */ u8 *aData; /* Pointer to buffer containing changeset */ @@ -173690,6 +182471,7 @@ struct SessionTable { SessionTable *pNext; char *zName; /* Local name of table */ int nCol; /* Number of columns in table zName */ + int bStat1; /* True if this is sqlite_stat1 */ const char **azCol; /* Column names */ u8 *abPK; /* Array of primary key flags */ int nEntry; /* Total number of entries in hash table */ @@ -173807,8 +182589,8 @@ struct SessionTable { ** statement. ** ** For a DELETE change, all fields within the record except those associated -** with PRIMARY KEY columns are set to "undefined". The PRIMARY KEY fields -** contain the values identifying the row to delete. +** with PRIMARY KEY columns are omitted. The PRIMARY KEY fields contain the +** values identifying the row to delete. ** ** For an UPDATE change, all fields except those associated with PRIMARY KEY ** columns and columns that are modified by the UPDATE are set to "undefined". @@ -174073,6 +182855,7 @@ static int sessionPreupdateHash( h = sessionHashAppendBlob(h, n, z); }else{ assert( eType==SQLITE_NULL ); + assert( pTab->bStat1==0 || i!=1 ); *pbNullPK = 1; } } @@ -174090,7 +182873,7 @@ static int sessionPreupdateHash( static int sessionSerialLen(u8 *a){ int e = *a; int n; - if( e==0 ) return 1; + if( e==0 || e==0xFF ) return 1; if( e==SQLITE_NULL ) return 1; if( e==SQLITE_INTEGER || e==SQLITE_FLOAT ) return 9; return sessionVarintGet(&a[1], &n) + 1 + n; @@ -174170,7 +182953,7 @@ static int sessionChangeEqual( int n1 = sessionSerialLen(a1); int n2 = sessionSerialLen(a2); - if( pTab->abPK[iCol] && (n1!=n2 || memcmp(a1, a2, n1)) ){ + if( n1!=n2 || memcmp(a1, a2, n1) ){ return 0; } a1 += n1; @@ -174413,9 +183196,8 @@ static int sessionPreupdateEqual( }else{ z = sqlite3_value_blob(pVal); } - if( memcmp(a, z, n) ) return 0; + if( n>0 && memcmp(a, z, n) ) return 0; a += n; - break; } } } @@ -174471,9 +183253,7 @@ static int sessionGrowHash(int bPatchset, SessionTable *pTab){ /* ** This function queries the database for the names of the columns of table -** zThis, in schema zDb. It is expected that the table has nCol columns. If -** not, SQLITE_SCHEMA is returned and none of the output variables are -** populated. +** zThis, in schema zDb. ** ** Otherwise, if they are not NULL, variable *pnCol is set to the number ** of columns in the database table and variable *pzTab is set to point to a @@ -174494,9 +183274,7 @@ static int sessionGrowHash(int bPatchset, SessionTable *pTab){ ** *pabPK = {1, 0, 0, 1} ** ** All returned buffers are part of the same single allocation, which must -** be freed using sqlite3_free() by the caller. If pazCol was not NULL, then -** pointer *pazCol should be freed to release all memory. Otherwise, pointer -** *pabPK. It is illegal for both pazCol and pabPK to be NULL. +** be freed using sqlite3_free() by the caller */ static int sessionTableInfo( sqlite3 *db, /* Database connection */ @@ -174521,7 +183299,23 @@ static int sessionTableInfo( assert( pazCol && pabPK ); nThis = sqlite3Strlen30(zThis); - zPragma = sqlite3_mprintf("PRAGMA '%q'.table_info('%q')", zDb, zThis); + if( nThis==12 && 0==sqlite3_stricmp("sqlite_stat1", zThis) ){ + rc = sqlite3_table_column_metadata(db, zDb, zThis, 0, 0, 0, 0, 0, 0); + if( rc==SQLITE_OK ){ + /* For sqlite_stat1, pretend that (tbl,idx) is the PRIMARY KEY. */ + zPragma = sqlite3_mprintf( + "SELECT 0, 'tbl', '', 0, '', 1 UNION ALL " + "SELECT 1, 'idx', '', 0, '', 2 UNION ALL " + "SELECT 2, 'stat', '', 0, '', 0" + ); + }else if( rc==SQLITE_ERROR ){ + zPragma = sqlite3_mprintf(""); + }else{ + return rc; + } + }else{ + zPragma = sqlite3_mprintf("PRAGMA '%q'.table_info('%q')", zDb, zThis); + } if( !zPragma ) return SQLITE_NOMEM; rc = sqlite3_prepare_v2(db, zPragma, -1, &pStmt, 0); @@ -174613,12 +183407,56 @@ static int sessionInitTable(sqlite3_session *pSession, SessionTable *pTab){ break; } } + if( 0==sqlite3_stricmp("sqlite_stat1", pTab->zName) ){ + pTab->bStat1 = 1; + } } } return (pSession->rc || pTab->abPK==0); } /* +** Versions of the four methods in object SessionHook for use with the +** sqlite_stat1 table. The purpose of this is to substitute a zero-length +** blob each time a NULL value is read from the "idx" column of the +** sqlite_stat1 table. +*/ +typedef struct SessionStat1Ctx SessionStat1Ctx; +struct SessionStat1Ctx { + SessionHook hook; + sqlite3_session *pSession; +}; +static int sessionStat1Old(void *pCtx, int iCol, sqlite3_value **ppVal){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + sqlite3_value *pVal = 0; + int rc = p->hook.xOld(p->hook.pCtx, iCol, &pVal); + if( rc==SQLITE_OK && iCol==1 && sqlite3_value_type(pVal)==SQLITE_NULL ){ + pVal = p->pSession->pZeroBlob; + } + *ppVal = pVal; + return rc; +} +static int sessionStat1New(void *pCtx, int iCol, sqlite3_value **ppVal){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + sqlite3_value *pVal = 0; + int rc = p->hook.xNew(p->hook.pCtx, iCol, &pVal); + if( rc==SQLITE_OK && iCol==1 && sqlite3_value_type(pVal)==SQLITE_NULL ){ + pVal = p->pSession->pZeroBlob; + } + *ppVal = pVal; + return rc; +} +static int sessionStat1Count(void *pCtx){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + return p->hook.xCount(p->hook.pCtx); +} +static int sessionStat1Depth(void *pCtx){ + SessionStat1Ctx *p = (SessionStat1Ctx*)pCtx; + return p->hook.xDepth(p->hook.pCtx); +} + + +/* ** This function is only called from with a pre-update-hook reporting a ** change on table pTab (attached to session pSession). The type of change ** (UPDATE, INSERT, DELETE) is specified by the first argument. @@ -174634,6 +183472,7 @@ static void sessionPreupdateOneChange( int iHash; int bNull = 0; int rc = SQLITE_OK; + SessionStat1Ctx stat1 = {0}; if( pSession->rc ) return; @@ -174653,6 +183492,25 @@ static void sessionPreupdateOneChange( return; } + if( pTab->bStat1 ){ + stat1.hook = pSession->hook; + stat1.pSession = pSession; + pSession->hook.pCtx = (void*)&stat1; + pSession->hook.xNew = sessionStat1New; + pSession->hook.xOld = sessionStat1Old; + pSession->hook.xCount = sessionStat1Count; + pSession->hook.xDepth = sessionStat1Depth; + if( pSession->pZeroBlob==0 ){ + sqlite3_value *p = sqlite3ValueNew(0); + if( p==0 ){ + rc = SQLITE_NOMEM; + goto error_out; + } + sqlite3ValueSetStr(p, 0, "", 0, SQLITE_STATIC); + pSession->pZeroBlob = p; + } + } + /* Calculate the hash-key for this change. If the primary key of the row ** includes a NULL value, exit early. Such changes are ignored by the ** session module. */ @@ -174742,6 +183600,9 @@ static void sessionPreupdateOneChange( /* If an error has occurred, mark the session object as failed. */ error_out: + if( pTab->bStat1 ){ + pSession->hook = stat1.hook; + } if( rc!=SQLITE_OK ){ pSession->rc = rc; } @@ -175078,7 +183939,6 @@ SQLITE_API int sqlite3session_diff( if( abPK[i] ) bHasPk = 1; } } - } sqlite3_free((char*)azCol); if( bMismatch ){ @@ -175204,6 +184064,7 @@ SQLITE_API void sqlite3session_delete(sqlite3_session *pSession){ } } sqlite3_mutex_leave(sqlite3_db_mutex(db)); + sqlite3ValueFree(pSession->pZeroBlob); /* Delete all attached table objects. And the contents of their ** associated hash-tables. */ @@ -175671,28 +184532,42 @@ static int sessionSelectStmt( sqlite3_stmt **ppStmt /* OUT: Prepared SELECT statement */ ){ int rc = SQLITE_OK; - int i; - const char *zSep = ""; - SessionBuffer buf = {0, 0, 0}; + char *zSql = 0; + int nSql = -1; - sessionAppendStr(&buf, "SELECT * FROM ", &rc); - sessionAppendIdent(&buf, zDb, &rc); - sessionAppendStr(&buf, ".", &rc); - sessionAppendIdent(&buf, zTab, &rc); - sessionAppendStr(&buf, " WHERE ", &rc); - for(i=0; i<nCol; i++){ - if( abPK[i] ){ - sessionAppendStr(&buf, zSep, &rc); - sessionAppendIdent(&buf, azCol[i], &rc); - sessionAppendStr(&buf, " = ?", &rc); - sessionAppendInteger(&buf, i+1, &rc); - zSep = " AND "; + if( 0==sqlite3_stricmp("sqlite_stat1", zTab) ){ + zSql = sqlite3_mprintf( + "SELECT tbl, ?2, stat FROM %Q.sqlite_stat1 WHERE tbl IS ?1 AND " + "idx IS (CASE WHEN ?2=X'' THEN NULL ELSE ?2 END)", zDb + ); + if( zSql==0 ) rc = SQLITE_NOMEM; + }else{ + int i; + const char *zSep = ""; + SessionBuffer buf = {0, 0, 0}; + + sessionAppendStr(&buf, "SELECT * FROM ", &rc); + sessionAppendIdent(&buf, zDb, &rc); + sessionAppendStr(&buf, ".", &rc); + sessionAppendIdent(&buf, zTab, &rc); + sessionAppendStr(&buf, " WHERE ", &rc); + for(i=0; i<nCol; i++){ + if( abPK[i] ){ + sessionAppendStr(&buf, zSep, &rc); + sessionAppendIdent(&buf, azCol[i], &rc); + sessionAppendStr(&buf, " IS ?", &rc); + sessionAppendInteger(&buf, i+1, &rc); + zSep = " AND "; + } } + zSql = (char*)buf.aBuf; + nSql = buf.nBuf; } + if( rc==SQLITE_OK ){ - rc = sqlite3_prepare_v2(db, (char *)buf.aBuf, buf.nBuf, ppStmt, 0); + rc = sqlite3_prepare_v2(db, zSql, nSql, ppStmt, 0); } - sqlite3_free(buf.aBuf); + sqlite3_free(zSql); return rc; } @@ -176075,7 +184950,7 @@ SQLITE_API int sqlite3changeset_start_strm( ** object and the buffer is full, discard some data to free up space. */ static void sessionDiscardData(SessionInput *pIn){ - if( pIn->bEof && pIn->xInput && pIn->iNext>=SESSIONS_STRM_CHUNK_SIZE ){ + if( pIn->xInput && pIn->iNext>=SESSIONS_STRM_CHUNK_SIZE ){ int nMove = pIn->buf.nBuf - pIn->iNext; assert( nMove>=0 ); if( nMove>0 ){ @@ -176203,13 +185078,16 @@ static int sessionReadRecord( if( abPK && abPK[i]==0 ) continue; rc = sessionInputBuffer(pIn, 9); if( rc==SQLITE_OK ){ - eType = pIn->aData[pIn->iNext++]; - } - - assert( apOut[i]==0 ); - if( eType ){ - apOut[i] = sqlite3ValueNew(0); - if( !apOut[i] ) rc = SQLITE_NOMEM; + if( pIn->iNext>=pIn->nData ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + eType = pIn->aData[pIn->iNext++]; + assert( apOut[i]==0 ); + if( eType ){ + apOut[i] = sqlite3ValueNew(0); + if( !apOut[i] ) rc = SQLITE_NOMEM; + } + } } if( rc==SQLITE_OK ){ @@ -176219,10 +185097,14 @@ static int sessionReadRecord( pIn->iNext += sessionVarintGet(aVal, &nByte); rc = sessionInputBuffer(pIn, nByte); if( rc==SQLITE_OK ){ - u8 enc = (eType==SQLITE_TEXT ? SQLITE_UTF8 : 0); - rc = sessionValueSetStr(apOut[i],&pIn->aData[pIn->iNext],nByte,enc); + if( nByte<0 || nByte>pIn->nData-pIn->iNext ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + u8 enc = (eType==SQLITE_TEXT ? SQLITE_UTF8 : 0); + rc = sessionValueSetStr(apOut[i],&pIn->aData[pIn->iNext],nByte,enc); + pIn->iNext += nByte; + } } - pIn->iNext += nByte; } if( eType==SQLITE_INTEGER || eType==SQLITE_FLOAT ){ sqlite3_int64 v = sessionGetI64(aVal); @@ -176262,8 +185144,19 @@ static int sessionChangesetBufferTblhdr(SessionInput *pIn, int *pnByte){ rc = sessionInputBuffer(pIn, 9); if( rc==SQLITE_OK ){ nRead += sessionVarintGet(&pIn->aData[pIn->iNext + nRead], &nCol); - rc = sessionInputBuffer(pIn, nRead+nCol+100); - nRead += nCol; + /* The hard upper limit for the number of columns in an SQLite + ** database table is, according to sqliteLimit.h, 32676. So + ** consider any table-header that purports to have more than 65536 + ** columns to be corrupt. This is convenient because otherwise, + ** if the (nCol>65536) condition below were omitted, a sufficiently + ** large value for nCol may cause nRead to wrap around and become + ** negative. Leading to a crash. */ + if( nCol<0 || nCol>65536 ){ + rc = SQLITE_CORRUPT_BKPT; + }else{ + rc = sessionInputBuffer(pIn, nRead+nCol+100); + nRead += nCol; + } } while( rc==SQLITE_OK ){ @@ -176340,11 +185233,15 @@ static int sessionChangesetReadTblhdr(sqlite3_changeset_iter *p){ int nByte; int nVarint; nVarint = sessionVarintGet(&p->in.aData[p->in.iNext], &p->nCol); - nCopy -= nVarint; - p->in.iNext += nVarint; - nByte = p->nCol * sizeof(sqlite3_value*) * 2 + nCopy; - p->tblhdr.nBuf = 0; - sessionBufferGrow(&p->tblhdr, nByte, &rc); + if( p->nCol>0 ){ + nCopy -= nVarint; + p->in.iNext += nVarint; + nByte = p->nCol * sizeof(sqlite3_value*) * 2 + nCopy; + p->tblhdr.nBuf = 0; + sessionBufferGrow(&p->tblhdr, nByte, &rc); + }else{ + rc = SQLITE_CORRUPT_BKPT; + } } if( rc==SQLITE_OK ){ @@ -176379,7 +185276,8 @@ static int sessionChangesetReadTblhdr(sqlite3_changeset_iter *p){ static int sessionChangesetNext( sqlite3_changeset_iter *p, /* Changeset iterator */ u8 **paRec, /* If non-NULL, store record pointer here */ - int *pnRec /* If non-NULL, store size of record here */ + int *pnRec, /* If non-NULL, store size of record here */ + int *pbNew /* If non-NULL, true if new table */ ){ int i; u8 op; @@ -176413,14 +185311,23 @@ static int sessionChangesetNext( p->in.iCurrent = p->in.iNext; op = p->in.aData[p->in.iNext++]; - if( op=='T' || op=='P' ){ + while( op=='T' || op=='P' ){ + if( pbNew ) *pbNew = 1; p->bPatchset = (op=='P'); if( sessionChangesetReadTblhdr(p) ) return p->rc; if( (p->rc = sessionInputBuffer(&p->in, 2)) ) return p->rc; p->in.iCurrent = p->in.iNext; + if( p->in.iNext>=p->in.nData ) return SQLITE_DONE; op = p->in.aData[p->in.iNext++]; } + if( p->zTab==0 ){ + /* The first record in the changeset is not a table header. Must be a + ** corrupt changeset. */ + assert( p->in.iNext==1 ); + return (p->rc = SQLITE_CORRUPT_BKPT); + } + p->op = op; p->bIndirect = p->in.aData[p->in.iNext++]; if( p->op!=SQLITE_UPDATE && p->op!=SQLITE_DELETE && p->op!=SQLITE_INSERT ){ @@ -176463,9 +185370,9 @@ static int sessionChangesetNext( ** new.* to old.*, to accommodate the code that reads these arrays. */ for(i=0; i<p->nCol; i++){ assert( p->apValue[i]==0 ); - assert( p->abPK[i]==0 || p->apValue[i+p->nCol] ); if( p->abPK[i] ){ p->apValue[i] = p->apValue[i+p->nCol]; + if( p->apValue[i]==0 ) return (p->rc = SQLITE_CORRUPT_BKPT); p->apValue[i+p->nCol] = 0; } } @@ -176484,7 +185391,7 @@ static int sessionChangesetNext( ** callback by changeset_apply(). */ SQLITE_API int sqlite3changeset_next(sqlite3_changeset_iter *p){ - return sessionChangesetNext(p, 0, 0); + return sessionChangesetNext(p, 0, 0, 0); } /* @@ -176860,9 +185767,11 @@ struct SessionApplyCtx { int nCol; /* Size of azCol[] and abPK[] arrays */ const char **azCol; /* Array of column names */ u8 *abPK; /* Boolean array - true if column is in PK */ - + int bStat1; /* True if table is sqlite_stat1 */ int bDeferConstraints; /* True to defer constraints */ SessionBuffer constraints; /* Deferred constraints are stored here */ + SessionBuffer rebase; /* Rebase information (if any) here */ + int bRebaseStarted; /* If table header is already in rebase */ }; /* @@ -177030,6 +185939,7 @@ static int sessionUpdateRow( return rc; } + /* ** Formulate and prepare an SQL statement to query table zTab by primary ** key. Assuming the following table structure: @@ -177091,6 +186001,46 @@ static int sessionInsertRow( return rc; } +static int sessionPrepare(sqlite3 *db, sqlite3_stmt **pp, const char *zSql){ + return sqlite3_prepare_v2(db, zSql, -1, pp, 0); +} + +/* +** Prepare statements for applying changes to the sqlite_stat1 table. +** These are similar to those created by sessionSelectRow(), +** sessionInsertRow(), sessionUpdateRow() and sessionDeleteRow() for +** other tables. +*/ +static int sessionStat1Sql(sqlite3 *db, SessionApplyCtx *p){ + int rc = sessionSelectRow(db, "sqlite_stat1", p); + if( rc==SQLITE_OK ){ + rc = sessionPrepare(db, &p->pInsert, + "INSERT INTO main.sqlite_stat1 VALUES(?1, " + "CASE WHEN length(?2)=0 AND typeof(?2)='blob' THEN NULL ELSE ?2 END, " + "?3)" + ); + } + if( rc==SQLITE_OK ){ + rc = sessionPrepare(db, &p->pUpdate, + "UPDATE main.sqlite_stat1 SET " + "tbl = CASE WHEN ?2 THEN ?3 ELSE tbl END, " + "idx = CASE WHEN ?5 THEN ?6 ELSE idx END, " + "stat = CASE WHEN ?8 THEN ?9 ELSE stat END " + "WHERE tbl=?1 AND idx IS " + "CASE WHEN length(?4)=0 AND typeof(?4)='blob' THEN NULL ELSE ?4 END " + "AND (?10 OR ?8=0 OR stat IS ?7)" + ); + } + if( rc==SQLITE_OK ){ + rc = sessionPrepare(db, &p->pDelete, + "DELETE FROM main.sqlite_stat1 WHERE tbl=?1 AND idx IS " + "CASE WHEN length(?2)=0 AND typeof(?2)='blob' THEN NULL ELSE ?2 END " + "AND (?4 OR stat IS ?3)" + ); + } + return rc; +} + /* ** A wrapper around sqlite3_bind_value() that detects an extra problem. ** See comments in the body of this function for details. @@ -177148,7 +186098,13 @@ static int sessionBindRow( if( !abPK || abPK[i] ){ sqlite3_value *pVal; (void)xValue(pIter, i, &pVal); - rc = sessionBindValue(pStmt, i+1, pVal); + if( pVal==0 ){ + /* The value in the changeset was "undefined". This indicates a + ** corrupt changeset blob. */ + rc = SQLITE_CORRUPT_BKPT; + }else{ + rc = sessionBindValue(pStmt, i+1, pVal); + } } } return rc; @@ -177197,6 +186153,54 @@ static int sessionSeekToRow( } /* +** This function is called from within sqlite3changset_apply_v2() when +** a conflict is encountered and resolved using conflict resolution +** mode eType (either SQLITE_CHANGESET_OMIT or SQLITE_CHANGESET_REPLACE).. +** It adds a conflict resolution record to the buffer in +** SessionApplyCtx.rebase, which will eventually be returned to the caller +** of apply_v2() as the "rebase" buffer. +** +** Return SQLITE_OK if successful, or an SQLite error code otherwise. +*/ +static int sessionRebaseAdd( + SessionApplyCtx *p, /* Apply context */ + int eType, /* Conflict resolution (OMIT or REPLACE) */ + sqlite3_changeset_iter *pIter /* Iterator pointing at current change */ +){ + int rc = SQLITE_OK; + int i; + int eOp = pIter->op; + if( p->bRebaseStarted==0 ){ + /* Append a table-header to the rebase buffer */ + const char *zTab = pIter->zTab; + sessionAppendByte(&p->rebase, 'T', &rc); + sessionAppendVarint(&p->rebase, p->nCol, &rc); + sessionAppendBlob(&p->rebase, p->abPK, p->nCol, &rc); + sessionAppendBlob(&p->rebase, (u8*)zTab, (int)strlen(zTab)+1, &rc); + p->bRebaseStarted = 1; + } + + assert( eType==SQLITE_CHANGESET_REPLACE||eType==SQLITE_CHANGESET_OMIT ); + assert( eOp==SQLITE_DELETE || eOp==SQLITE_INSERT || eOp==SQLITE_UPDATE ); + + sessionAppendByte(&p->rebase, + (eOp==SQLITE_DELETE ? SQLITE_DELETE : SQLITE_INSERT), &rc + ); + sessionAppendByte(&p->rebase, (eType==SQLITE_CHANGESET_REPLACE), &rc); + for(i=0; i<p->nCol; i++){ + sqlite3_value *pVal = 0; + if( eOp==SQLITE_DELETE || (eOp==SQLITE_UPDATE && p->abPK[i]) ){ + sqlite3changeset_old(pIter, i, &pVal); + }else{ + sqlite3changeset_new(pIter, i, &pVal); + } + sessionAppendValue(&p->rebase, pVal, &rc); + } + + return rc; +} + +/* ** Invoke the conflict handler for the change that the changeset iterator ** currently points to. ** @@ -177271,7 +186275,7 @@ static int sessionConflictHandler( u8 *aBlob = &pIter->in.aData[pIter->in.iCurrent]; int nBlob = pIter->in.iNext - pIter->in.iCurrent; sessionAppendBlob(&p->constraints, aBlob, nBlob, &rc); - res = SQLITE_CHANGESET_OMIT; + return SQLITE_OK; }else{ /* No other row with the new.* primary key. */ res = xConflict(pCtx, eType+1, pIter); @@ -177297,6 +186301,9 @@ static int sessionConflictHandler( rc = SQLITE_MISUSE; break; } + if( rc==SQLITE_OK ){ + rc = sessionRebaseAdd(p, res, pIter); + } } return rc; @@ -177421,11 +186428,25 @@ static int sessionApplyOneOp( }else{ assert( op==SQLITE_INSERT ); - rc = sessionBindRow(pIter, sqlite3changeset_new, nCol, 0, p->pInsert); - if( rc!=SQLITE_OK ) return rc; + if( p->bStat1 ){ + /* Check if there is a conflicting row. For sqlite_stat1, this needs + ** to be done using a SELECT, as there is no PRIMARY KEY in the + ** database schema to throw an exception if a duplicate is inserted. */ + rc = sessionSeekToRow(p->db, pIter, p->abPK, p->pSelect); + if( rc==SQLITE_ROW ){ + rc = SQLITE_CONSTRAINT; + sqlite3_reset(p->pSelect); + } + } + + if( rc==SQLITE_OK ){ + rc = sessionBindRow(pIter, sqlite3changeset_new, nCol, 0, p->pInsert); + if( rc!=SQLITE_OK ) return rc; + + sqlite3_step(p->pInsert); + rc = sqlite3_reset(p->pInsert); + } - sqlite3_step(p->pInsert); - rc = sqlite3_reset(p->pInsert); if( (rc&0xff)==SQLITE_CONSTRAINT ){ rc = sessionConflictHandler( SQLITE_CHANGESET_CONFLICT, p, pIter, xConflict, pCtx, pbReplace @@ -177458,42 +186479,42 @@ static int sessionApplyOneWithRetry( int rc; rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, &bReplace, &bRetry); - assert( rc==SQLITE_OK || (bRetry==0 && bReplace==0) ); - - /* If the bRetry flag is set, the change has not been applied due to an - ** SQLITE_CHANGESET_DATA problem (i.e. this is an UPDATE or DELETE and - ** a row with the correct PK is present in the db, but one or more other - ** fields do not contain the expected values) and the conflict handler - ** returned SQLITE_CHANGESET_REPLACE. In this case retry the operation, - ** but pass NULL as the final argument so that sessionApplyOneOp() ignores - ** the SQLITE_CHANGESET_DATA problem. */ - if( bRetry ){ - assert( pIter->op==SQLITE_UPDATE || pIter->op==SQLITE_DELETE ); - rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0); - } - - /* If the bReplace flag is set, the change is an INSERT that has not - ** been performed because the database already contains a row with the - ** specified primary key and the conflict handler returned - ** SQLITE_CHANGESET_REPLACE. In this case remove the conflicting row - ** before reattempting the INSERT. */ - else if( bReplace ){ - assert( pIter->op==SQLITE_INSERT ); - rc = sqlite3_exec(db, "SAVEPOINT replace_op", 0, 0, 0); - if( rc==SQLITE_OK ){ - rc = sessionBindRow(pIter, - sqlite3changeset_new, pApply->nCol, pApply->abPK, pApply->pDelete); - sqlite3_bind_int(pApply->pDelete, pApply->nCol+1, 1); - } - if( rc==SQLITE_OK ){ - sqlite3_step(pApply->pDelete); - rc = sqlite3_reset(pApply->pDelete); - } - if( rc==SQLITE_OK ){ + if( rc==SQLITE_OK ){ + /* If the bRetry flag is set, the change has not been applied due to an + ** SQLITE_CHANGESET_DATA problem (i.e. this is an UPDATE or DELETE and + ** a row with the correct PK is present in the db, but one or more other + ** fields do not contain the expected values) and the conflict handler + ** returned SQLITE_CHANGESET_REPLACE. In this case retry the operation, + ** but pass NULL as the final argument so that sessionApplyOneOp() ignores + ** the SQLITE_CHANGESET_DATA problem. */ + if( bRetry ){ + assert( pIter->op==SQLITE_UPDATE || pIter->op==SQLITE_DELETE ); rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0); } - if( rc==SQLITE_OK ){ - rc = sqlite3_exec(db, "RELEASE replace_op", 0, 0, 0); + + /* If the bReplace flag is set, the change is an INSERT that has not + ** been performed because the database already contains a row with the + ** specified primary key and the conflict handler returned + ** SQLITE_CHANGESET_REPLACE. In this case remove the conflicting row + ** before reattempting the INSERT. */ + else if( bReplace ){ + assert( pIter->op==SQLITE_INSERT ); + rc = sqlite3_exec(db, "SAVEPOINT replace_op", 0, 0, 0); + if( rc==SQLITE_OK ){ + rc = sessionBindRow(pIter, + sqlite3changeset_new, pApply->nCol, pApply->abPK, pApply->pDelete); + sqlite3_bind_int(pApply->pDelete, pApply->nCol+1, 1); + } + if( rc==SQLITE_OK ){ + sqlite3_step(pApply->pDelete); + rc = sqlite3_reset(pApply->pDelete); + } + if( rc==SQLITE_OK ){ + rc = sessionApplyOneOp(pIter, pApply, xConflict, pCtx, 0, 0); + } + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(db, "RELEASE replace_op", 0, 0, 0); + } } } @@ -177569,10 +186590,12 @@ static int sessionChangesetApply( int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ sqlite3_changeset_iter *p /* Handle describing change and conflict */ ), - void *pCtx /* First argument passed to xConflict */ + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, /* OUT: Rebase information */ + int flags /* SESSION_APPLY_XXX flags */ ){ int schemaMismatch = 0; - int rc; /* Return code */ + int rc = SQLITE_OK; /* Return code */ const char *zTab = 0; /* Name of current table */ int nTab = 0; /* Result of sqlite3Strlen30(zTab) */ SessionApplyCtx sApply; /* changeset_apply() context object */ @@ -177583,7 +186606,9 @@ static int sessionChangesetApply( pIter->in.bNoDiscard = 1; memset(&sApply, 0, sizeof(sApply)); sqlite3_mutex_enter(sqlite3_db_mutex(db)); - rc = sqlite3_exec(db, "SAVEPOINT changeset_apply", 0, 0, 0); + if( (flags & SQLITE_CHANGESETAPPLY_NOSAVEPOINT)==0 ){ + rc = sqlite3_exec(db, "SAVEPOINT changeset_apply", 0, 0, 0); + } if( rc==SQLITE_OK ){ rc = sqlite3_exec(db, "PRAGMA defer_foreign_keys = 1", 0, 0, 0); } @@ -177607,9 +186632,18 @@ static int sessionChangesetApply( sqlite3_finalize(sApply.pUpdate); sqlite3_finalize(sApply.pInsert); sqlite3_finalize(sApply.pSelect); - memset(&sApply, 0, sizeof(sApply)); sApply.db = db; + sApply.pDelete = 0; + sApply.pUpdate = 0; + sApply.pInsert = 0; + sApply.pSelect = 0; + sApply.nCol = 0; + sApply.azCol = 0; + sApply.abPK = 0; + sApply.bStat1 = 0; sApply.bDeferConstraints = 1; + sApply.bRebaseStarted = 0; + memset(&sApply.constraints, 0, sizeof(SessionBuffer)); /* If an xFilter() callback was specified, invoke it now. If the ** xFilter callback returns zero, skip this table. If it returns @@ -177658,12 +186692,20 @@ static int sessionChangesetApply( } else{ sApply.nCol = nCol; - if((rc = sessionSelectRow(db, zTab, &sApply)) - || (rc = sessionUpdateRow(db, zTab, &sApply)) - || (rc = sessionDeleteRow(db, zTab, &sApply)) - || (rc = sessionInsertRow(db, zTab, &sApply)) - ){ - break; + if( 0==sqlite3_stricmp(zTab, "sqlite_stat1") ){ + if( (rc = sessionStat1Sql(db, &sApply) ) ){ + break; + } + sApply.bStat1 = 1; + }else{ + if((rc = sessionSelectRow(db, zTab, &sApply)) + || (rc = sessionUpdateRow(db, zTab, &sApply)) + || (rc = sessionDeleteRow(db, zTab, &sApply)) + || (rc = sessionInsertRow(db, zTab, &sApply)) + ){ + break; + } + sApply.bStat1 = 0; } } nTab = sqlite3Strlen30(zTab); @@ -177704,24 +186746,63 @@ static int sessionChangesetApply( } sqlite3_exec(db, "PRAGMA defer_foreign_keys = 0", 0, 0, 0); - if( rc==SQLITE_OK ){ - rc = sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); - }else{ - sqlite3_exec(db, "ROLLBACK TO changeset_apply", 0, 0, 0); - sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); + if( (flags & SQLITE_CHANGESETAPPLY_NOSAVEPOINT)==0 ){ + if( rc==SQLITE_OK ){ + rc = sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); + }else{ + sqlite3_exec(db, "ROLLBACK TO changeset_apply", 0, 0, 0); + sqlite3_exec(db, "RELEASE changeset_apply", 0, 0, 0); + } } + if( rc==SQLITE_OK && bPatchset==0 && ppRebase && pnRebase ){ + *ppRebase = (void*)sApply.rebase.aBuf; + *pnRebase = sApply.rebase.nBuf; + sApply.rebase.aBuf = 0; + } sqlite3_finalize(sApply.pInsert); sqlite3_finalize(sApply.pDelete); sqlite3_finalize(sApply.pUpdate); sqlite3_finalize(sApply.pSelect); sqlite3_free((char*)sApply.azCol); /* cast works around VC++ bug */ sqlite3_free((char*)sApply.constraints.aBuf); + sqlite3_free((char*)sApply.rebase.aBuf); sqlite3_mutex_leave(sqlite3_db_mutex(db)); return rc; } /* +** Apply the changeset passed via pChangeset/nChangeset to the main +** database attached to handle "db". +*/ +SQLITE_API int sqlite3changeset_apply_v2( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int nChangeset, /* Size of changeset in bytes */ + void *pChangeset, /* Changeset blob */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, + int flags +){ + sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */ + int rc = sqlite3changeset_start(&pIter, nChangeset, pChangeset); + if( rc==SQLITE_OK ){ + rc = sessionChangesetApply( + db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase, flags + ); + } + return rc; +} + +/* ** Apply the changeset passed via pChangeset/nChangeset to the main database ** attached to handle "db". Invoke the supplied conflict handler callback ** to resolve any conflicts encountered while applying the change. @@ -177741,12 +186822,9 @@ SQLITE_API int sqlite3changeset_apply( ), void *pCtx /* First argument passed to xConflict */ ){ - sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */ - int rc = sqlite3changeset_start(&pIter, nChangeset, pChangeset); - if( rc==SQLITE_OK ){ - rc = sessionChangesetApply(db, pIter, xFilter, xConflict, pCtx); - } - return rc; + return sqlite3changeset_apply_v2( + db, nChangeset, pChangeset, xFilter, xConflict, pCtx, 0, 0, 0 + ); } /* @@ -177754,7 +186832,7 @@ SQLITE_API int sqlite3changeset_apply( ** attached to handle "db". Invoke the supplied conflict handler callback ** to resolve any conflicts encountered while applying the change. */ -SQLITE_API int sqlite3changeset_apply_strm( +SQLITE_API int sqlite3changeset_apply_v2_strm( sqlite3 *db, /* Apply change to "main" db of this handle */ int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */ void *pIn, /* First arg for xInput */ @@ -177767,15 +186845,38 @@ SQLITE_API int sqlite3changeset_apply_strm( int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ sqlite3_changeset_iter *p /* Handle describing change and conflict */ ), - void *pCtx /* First argument passed to xConflict */ + void *pCtx, /* First argument passed to xConflict */ + void **ppRebase, int *pnRebase, + int flags ){ sqlite3_changeset_iter *pIter; /* Iterator to skip through changeset */ int rc = sqlite3changeset_start_strm(&pIter, xInput, pIn); if( rc==SQLITE_OK ){ - rc = sessionChangesetApply(db, pIter, xFilter, xConflict, pCtx); + rc = sessionChangesetApply( + db, pIter, xFilter, xConflict, pCtx, ppRebase, pnRebase, flags + ); } return rc; } +SQLITE_API int sqlite3changeset_apply_strm( + sqlite3 *db, /* Apply change to "main" db of this handle */ + int (*xInput)(void *pIn, void *pData, int *pnData), /* Input function */ + void *pIn, /* First arg for xInput */ + int(*xFilter)( + void *pCtx, /* Copy of sixth arg to _apply() */ + const char *zTab /* Table name */ + ), + int(*xConflict)( + void *pCtx, /* Copy of sixth arg to _apply() */ + int eConflict, /* DATA, MISSING, CONFLICT, CONSTRAINT */ + sqlite3_changeset_iter *p /* Handle describing change and conflict */ + ), + void *pCtx /* First argument passed to xConflict */ +){ + return sqlite3changeset_apply_v2_strm( + db, xInput, pIn, xFilter, xConflict, pCtx, 0, 0, 0 + ); +} /* ** sqlite3_changegroup handle. @@ -177793,6 +186894,7 @@ struct sqlite3_changegroup { */ static int sessionChangeMerge( SessionTable *pTab, /* Table structure */ + int bRebase, /* True for a rebase hash-table */ int bPatchset, /* True for patchsets */ SessionChange *pExist, /* Existing change */ int op2, /* Second change operation */ @@ -177802,6 +186904,7 @@ static int sessionChangeMerge( SessionChange **ppNew /* OUT: Merged change */ ){ SessionChange *pNew = 0; + int rc = SQLITE_OK; if( !pExist ){ pNew = (SessionChange *)sqlite3_malloc(sizeof(SessionChange) + nRec); @@ -177811,9 +186914,66 @@ static int sessionChangeMerge( memset(pNew, 0, sizeof(SessionChange)); pNew->op = op2; pNew->bIndirect = bIndirect; - pNew->nRecord = nRec; pNew->aRecord = (u8*)&pNew[1]; - memcpy(pNew->aRecord, aRec, nRec); + if( bIndirect==0 || bRebase==0 ){ + pNew->nRecord = nRec; + memcpy(pNew->aRecord, aRec, nRec); + }else{ + int i; + u8 *pIn = aRec; + u8 *pOut = pNew->aRecord; + for(i=0; i<pTab->nCol; i++){ + int nIn = sessionSerialLen(pIn); + if( *pIn==0 ){ + *pOut++ = 0; + }else if( pTab->abPK[i]==0 ){ + *pOut++ = 0xFF; + }else{ + memcpy(pOut, pIn, nIn); + pOut += nIn; + } + pIn += nIn; + } + pNew->nRecord = pOut - pNew->aRecord; + } + }else if( bRebase ){ + if( pExist->op==SQLITE_DELETE && pExist->bIndirect ){ + *ppNew = pExist; + }else{ + int nByte = nRec + pExist->nRecord + sizeof(SessionChange); + pNew = (SessionChange*)sqlite3_malloc(nByte); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + int i; + u8 *a1 = pExist->aRecord; + u8 *a2 = aRec; + u8 *pOut; + + memset(pNew, 0, nByte); + pNew->bIndirect = bIndirect || pExist->bIndirect; + pNew->op = op2; + pOut = pNew->aRecord = (u8*)&pNew[1]; + + for(i=0; i<pTab->nCol; i++){ + int n1 = sessionSerialLen(a1); + int n2 = sessionSerialLen(a2); + if( *a1==0xFF || (pTab->abPK[i]==0 && bIndirect) ){ + *pOut++ = 0xFF; + }else if( *a2==0 ){ + memcpy(pOut, a1, n1); + pOut += n1; + }else{ + memcpy(pOut, a2, n2); + pOut += n2; + } + a1 += n1; + a2 += n2; + } + pNew->nRecord = pOut - pNew->aRecord; + } + sqlite3_free(pExist); + } }else{ int op1 = pExist->op; @@ -177907,7 +187067,7 @@ static int sessionChangeMerge( } *ppNew = pNew; - return SQLITE_OK; + return rc; } /* @@ -177916,15 +187076,15 @@ static int sessionChangeMerge( */ static int sessionChangesetToHash( sqlite3_changeset_iter *pIter, /* Iterator to read from */ - sqlite3_changegroup *pGrp /* Changegroup object to add changeset to */ + sqlite3_changegroup *pGrp, /* Changegroup object to add changeset to */ + int bRebase /* True if hash table is for rebasing */ ){ u8 *aRec; int nRec; int rc = SQLITE_OK; SessionTable *pTab = 0; - - while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec) ){ + while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec, 0) ){ const char *zNew; int nCol; int op; @@ -178004,7 +187164,7 @@ static int sessionChangesetToHash( } } - rc = sessionChangeMerge(pTab, + rc = sessionChangeMerge(pTab, bRebase, pIter->bPatchset, pExist, op, bIndirect, aRec, nRec, &pChange ); if( rc ) break; @@ -178112,7 +187272,7 @@ SQLITE_API int sqlite3changegroup_add(sqlite3_changegroup *pGrp, int nData, void rc = sqlite3changeset_start(&pIter, nData, pData); if( rc==SQLITE_OK ){ - rc = sessionChangesetToHash(pIter, pGrp); + rc = sessionChangesetToHash(pIter, pGrp, 0); } sqlite3changeset_finalize(pIter); return rc; @@ -178143,7 +187303,7 @@ SQLITE_API int sqlite3changegroup_add_strm( rc = sqlite3changeset_start_strm(&pIter, xInput, pIn); if( rc==SQLITE_OK ){ - rc = sessionChangesetToHash(pIter, pGrp); + rc = sessionChangesetToHash(pIter, pGrp, 0); } sqlite3changeset_finalize(pIter); return rc; @@ -178228,6 +187388,349 @@ SQLITE_API int sqlite3changeset_concat_strm( return rc; } +/* +** Changeset rebaser handle. +*/ +struct sqlite3_rebaser { + sqlite3_changegroup grp; /* Hash table */ +}; + +/* +** Buffers a1 and a2 must both contain a sessions module record nCol +** fields in size. This function appends an nCol sessions module +** record to buffer pBuf that is a copy of a1, except that for +** each field that is undefined in a1[], swap in the field from a2[]. +*/ +static void sessionAppendRecordMerge( + SessionBuffer *pBuf, /* Buffer to append to */ + int nCol, /* Number of columns in each record */ + u8 *a1, int n1, /* Record 1 */ + u8 *a2, int n2, /* Record 2 */ + int *pRc /* IN/OUT: error code */ +){ + sessionBufferGrow(pBuf, n1+n2, pRc); + if( *pRc==SQLITE_OK ){ + int i; + u8 *pOut = &pBuf->aBuf[pBuf->nBuf]; + for(i=0; i<nCol; i++){ + int nn1 = sessionSerialLen(a1); + int nn2 = sessionSerialLen(a2); + if( *a1==0 || *a1==0xFF ){ + memcpy(pOut, a2, nn2); + pOut += nn2; + }else{ + memcpy(pOut, a1, nn1); + pOut += nn1; + } + a1 += nn1; + a2 += nn2; + } + + pBuf->nBuf = pOut-pBuf->aBuf; + assert( pBuf->nBuf<=pBuf->nAlloc ); + } +} + +/* +** This function is called when rebasing a local UPDATE change against one +** or more remote UPDATE changes. The aRec/nRec buffer contains the current +** old.* and new.* records for the change. The rebase buffer (a single +** record) is in aChange/nChange. The rebased change is appended to buffer +** pBuf. +** +** Rebasing the UPDATE involves: +** +** * Removing any changes to fields for which the corresponding field +** in the rebase buffer is set to "replaced" (type 0xFF). If this +** means the UPDATE change updates no fields, nothing is appended +** to the output buffer. +** +** * For each field modified by the local change for which the +** corresponding field in the rebase buffer is not "undefined" (0x00) +** or "replaced" (0xFF), the old.* value is replaced by the value +** in the rebase buffer. +*/ +static void sessionAppendPartialUpdate( + SessionBuffer *pBuf, /* Append record here */ + sqlite3_changeset_iter *pIter, /* Iterator pointed at local change */ + u8 *aRec, int nRec, /* Local change */ + u8 *aChange, int nChange, /* Record to rebase against */ + int *pRc /* IN/OUT: Return Code */ +){ + sessionBufferGrow(pBuf, 2+nRec+nChange, pRc); + if( *pRc==SQLITE_OK ){ + int bData = 0; + u8 *pOut = &pBuf->aBuf[pBuf->nBuf]; + int i; + u8 *a1 = aRec; + u8 *a2 = aChange; + + *pOut++ = SQLITE_UPDATE; + *pOut++ = pIter->bIndirect; + for(i=0; i<pIter->nCol; i++){ + int n1 = sessionSerialLen(a1); + int n2 = sessionSerialLen(a2); + if( pIter->abPK[i] || a2[0]==0 ){ + if( !pIter->abPK[i] ) bData = 1; + memcpy(pOut, a1, n1); + pOut += n1; + }else if( a2[0]!=0xFF ){ + bData = 1; + memcpy(pOut, a2, n2); + pOut += n2; + }else{ + *pOut++ = '\0'; + } + a1 += n1; + a2 += n2; + } + if( bData ){ + a2 = aChange; + for(i=0; i<pIter->nCol; i++){ + int n1 = sessionSerialLen(a1); + int n2 = sessionSerialLen(a2); + if( pIter->abPK[i] || a2[0]!=0xFF ){ + memcpy(pOut, a1, n1); + pOut += n1; + }else{ + *pOut++ = '\0'; + } + a1 += n1; + a2 += n2; + } + pBuf->nBuf = (pOut - pBuf->aBuf); + } + } +} + +/* +** pIter is configured to iterate through a changeset. This function rebases +** that changeset according to the current configuration of the rebaser +** object passed as the first argument. If no error occurs and argument xOutput +** is not NULL, then the changeset is returned to the caller by invoking +** xOutput zero or more times and SQLITE_OK returned. Or, if xOutput is NULL, +** then (*ppOut) is set to point to a buffer containing the rebased changeset +** before this function returns. In this case (*pnOut) is set to the size of +** the buffer in bytes. It is the responsibility of the caller to eventually +** free the (*ppOut) buffer using sqlite3_free(). +** +** If an error occurs, an SQLite error code is returned. If ppOut and +** pnOut are not NULL, then the two output parameters are set to 0 before +** returning. +*/ +static int sessionRebase( + sqlite3_rebaser *p, /* Rebaser hash table */ + sqlite3_changeset_iter *pIter, /* Input data */ + int (*xOutput)(void *pOut, const void *pData, int nData), + void *pOut, /* Context for xOutput callback */ + int *pnOut, /* OUT: Number of bytes in output changeset */ + void **ppOut /* OUT: Inverse of pChangeset */ +){ + int rc = SQLITE_OK; + u8 *aRec = 0; + int nRec = 0; + int bNew = 0; + SessionTable *pTab = 0; + SessionBuffer sOut = {0,0,0}; + + while( SQLITE_ROW==sessionChangesetNext(pIter, &aRec, &nRec, &bNew) ){ + SessionChange *pChange = 0; + int bDone = 0; + + if( bNew ){ + const char *zTab = pIter->zTab; + for(pTab=p->grp.pList; pTab; pTab=pTab->pNext){ + if( 0==sqlite3_stricmp(pTab->zName, zTab) ) break; + } + bNew = 0; + + /* A patchset may not be rebased */ + if( pIter->bPatchset ){ + rc = SQLITE_ERROR; + } + + /* Append a table header to the output for this new table */ + sessionAppendByte(&sOut, pIter->bPatchset ? 'P' : 'T', &rc); + sessionAppendVarint(&sOut, pIter->nCol, &rc); + sessionAppendBlob(&sOut, pIter->abPK, pIter->nCol, &rc); + sessionAppendBlob(&sOut,(u8*)pIter->zTab,(int)strlen(pIter->zTab)+1,&rc); + } + + if( pTab && rc==SQLITE_OK ){ + int iHash = sessionChangeHash(pTab, 0, aRec, pTab->nChange); + + for(pChange=pTab->apChange[iHash]; pChange; pChange=pChange->pNext){ + if( sessionChangeEqual(pTab, 0, aRec, 0, pChange->aRecord) ){ + break; + } + } + } + + if( pChange ){ + assert( pChange->op==SQLITE_DELETE || pChange->op==SQLITE_INSERT ); + switch( pIter->op ){ + case SQLITE_INSERT: + if( pChange->op==SQLITE_INSERT ){ + bDone = 1; + if( pChange->bIndirect==0 ){ + sessionAppendByte(&sOut, SQLITE_UPDATE, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendBlob(&sOut, pChange->aRecord, pChange->nRecord, &rc); + sessionAppendBlob(&sOut, aRec, nRec, &rc); + } + } + break; + + case SQLITE_UPDATE: + bDone = 1; + if( pChange->op==SQLITE_DELETE ){ + if( pChange->bIndirect==0 ){ + u8 *pCsr = aRec; + sessionSkipRecord(&pCsr, pIter->nCol); + sessionAppendByte(&sOut, SQLITE_INSERT, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendRecordMerge(&sOut, pIter->nCol, + pCsr, nRec-(pCsr-aRec), + pChange->aRecord, pChange->nRecord, &rc + ); + } + }else{ + sessionAppendPartialUpdate(&sOut, pIter, + aRec, nRec, pChange->aRecord, pChange->nRecord, &rc + ); + } + break; + + default: + assert( pIter->op==SQLITE_DELETE ); + bDone = 1; + if( pChange->op==SQLITE_INSERT ){ + sessionAppendByte(&sOut, SQLITE_DELETE, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendRecordMerge(&sOut, pIter->nCol, + pChange->aRecord, pChange->nRecord, aRec, nRec, &rc + ); + } + break; + } + } + + if( bDone==0 ){ + sessionAppendByte(&sOut, pIter->op, &rc); + sessionAppendByte(&sOut, pIter->bIndirect, &rc); + sessionAppendBlob(&sOut, aRec, nRec, &rc); + } + if( rc==SQLITE_OK && xOutput && sOut.nBuf>SESSIONS_STRM_CHUNK_SIZE ){ + rc = xOutput(pOut, sOut.aBuf, sOut.nBuf); + sOut.nBuf = 0; + } + if( rc ) break; + } + + if( rc!=SQLITE_OK ){ + sqlite3_free(sOut.aBuf); + memset(&sOut, 0, sizeof(sOut)); + } + + if( rc==SQLITE_OK ){ + if( xOutput ){ + if( sOut.nBuf>0 ){ + rc = xOutput(pOut, sOut.aBuf, sOut.nBuf); + } + }else{ + *ppOut = (void*)sOut.aBuf; + *pnOut = sOut.nBuf; + sOut.aBuf = 0; + } + } + sqlite3_free(sOut.aBuf); + return rc; +} + +/* +** Create a new rebaser object. +*/ +SQLITE_API int sqlite3rebaser_create(sqlite3_rebaser **ppNew){ + int rc = SQLITE_OK; + sqlite3_rebaser *pNew; + + pNew = sqlite3_malloc(sizeof(sqlite3_rebaser)); + if( pNew==0 ){ + rc = SQLITE_NOMEM; + }else{ + memset(pNew, 0, sizeof(sqlite3_rebaser)); + } + *ppNew = pNew; + return rc; +} + +/* +** Call this one or more times to configure a rebaser. +*/ +SQLITE_API int sqlite3rebaser_configure( + sqlite3_rebaser *p, + int nRebase, const void *pRebase +){ + sqlite3_changeset_iter *pIter = 0; /* Iterator opened on pData/nData */ + int rc; /* Return code */ + rc = sqlite3changeset_start(&pIter, nRebase, (void*)pRebase); + if( rc==SQLITE_OK ){ + rc = sessionChangesetToHash(pIter, &p->grp, 1); + } + sqlite3changeset_finalize(pIter); + return rc; +} + +/* +** Rebase a changeset according to current rebaser configuration +*/ +SQLITE_API int sqlite3rebaser_rebase( + sqlite3_rebaser *p, + int nIn, const void *pIn, + int *pnOut, void **ppOut +){ + sqlite3_changeset_iter *pIter = 0; /* Iterator to skip through input */ + int rc = sqlite3changeset_start(&pIter, nIn, (void*)pIn); + + if( rc==SQLITE_OK ){ + rc = sessionRebase(p, pIter, 0, 0, pnOut, ppOut); + sqlite3changeset_finalize(pIter); + } + + return rc; +} + +/* +** Rebase a changeset according to current rebaser configuration +*/ +SQLITE_API int sqlite3rebaser_rebase_strm( + sqlite3_rebaser *p, + int (*xInput)(void *pIn, void *pData, int *pnData), + void *pIn, + int (*xOutput)(void *pOut, const void *pData, int nData), + void *pOut +){ + sqlite3_changeset_iter *pIter = 0; /* Iterator to skip through input */ + int rc = sqlite3changeset_start_strm(&pIter, xInput, pIn); + + if( rc==SQLITE_OK ){ + rc = sessionRebase(p, pIter, xOutput, pOut, 0, 0); + sqlite3changeset_finalize(pIter); + } + + return rc; +} + +/* +** Destroy a rebaser object +*/ +SQLITE_API void sqlite3rebaser_delete(sqlite3_rebaser *p){ + if( p ){ + sessionDeleteTable(p->grp.pList); + sqlite3_free(p); + } +} + #endif /* SQLITE_ENABLE_SESSION && SQLITE_ENABLE_PREUPDATE_HOOK */ /************** End of sqlite3session.c **************************************/ @@ -178324,6 +187827,7 @@ static const char jsonIsSpace[] = { ** but the definitions need to be repeated for separate compilation. */ typedef sqlite3_uint64 u64; typedef unsigned int u32; + typedef unsigned short int u16; typedef unsigned char u8; #endif @@ -178372,9 +187876,10 @@ static const char * const jsonType[] = { #define JNODE_RAW 0x01 /* Content is raw, not JSON encoded */ #define JNODE_ESCAPE 0x02 /* Content is text with \ escapes */ #define JNODE_REMOVE 0x04 /* Do not output */ -#define JNODE_REPLACE 0x08 /* Replace with JsonNode.iVal */ -#define JNODE_APPEND 0x10 /* More ARRAY/OBJECT entries at u.iAppend */ -#define JNODE_LABEL 0x20 /* Is a label of an object */ +#define JNODE_REPLACE 0x08 /* Replace with JsonNode.u.iReplace */ +#define JNODE_PATCH 0x10 /* Patch with JsonNode.u.pPatch */ +#define JNODE_APPEND 0x20 /* More ARRAY/OBJECT entries at u.iAppend */ +#define JNODE_LABEL 0x40 /* Is a label of an object */ /* A single node of parsed JSON @@ -178382,12 +187887,13 @@ static const char * const jsonType[] = { struct JsonNode { u8 eType; /* One of the JSON_ type values */ u8 jnFlags; /* JNODE flags */ - u8 iVal; /* Replacement value when JNODE_REPLACE */ u32 n; /* Bytes of content, or number of sub-nodes */ union { const char *zJContent; /* Content for INT, REAL, and STRING */ u32 iAppend; /* More terms for ARRAY and OBJECT */ u32 iKey; /* Key for ARRAY objects in json_tree() */ + u32 iReplace; /* Replacement content for JNODE_REPLACE */ + JsonNode *pPatch; /* Node chain of patch for JNODE_PATCH */ } u; }; @@ -178401,8 +187907,19 @@ struct JsonParse { u32 *aUp; /* Index of parent of each node */ u8 oom; /* Set to true if out of memory */ u8 nErr; /* Number of errors seen */ + u16 iDepth; /* Nesting depth */ + int nJson; /* Length of the zJson string in bytes */ }; +/* +** Maximum nesting depth of JSON for this implementation. +** +** This limit is needed to avoid a stack overflow in the recursive +** descent parser. A depth of 2000 is far deeper than any sane JSON +** should go. +*/ +#define JSON_MAX_DEPTH 2000 + /************************************************************************** ** Utility routines for dealing with JsonString objects **************************************************************************/ @@ -178635,6 +188152,14 @@ static void jsonParseReset(JsonParse *pParse){ } /* +** Free a JsonParse object that was obtained from sqlite3_malloc(). +*/ +static void jsonParseFree(JsonParse *pParse){ + jsonParseReset(pParse); + sqlite3_free(pParse); +} + +/* ** Convert the JsonNode pNode into a pure JSON string and ** append to pOut. Subsubstructure is also included. Return ** the number of JsonNode objects that are encoded. @@ -178644,6 +188169,13 @@ static void jsonRenderNode( JsonString *pOut, /* Write JSON here */ sqlite3_value **aReplace /* Replacement values */ ){ + if( pNode->jnFlags & (JNODE_REPLACE|JNODE_PATCH) ){ + if( pNode->jnFlags & JNODE_REPLACE ){ + jsonAppendValue(pOut, aReplace[pNode->u.iReplace]); + return; + } + pNode = pNode->u.pPatch; + } switch( pNode->eType ){ default: { assert( pNode->eType==JSON_NULL ); @@ -178675,12 +188207,7 @@ static void jsonRenderNode( jsonAppendChar(pOut, '['); for(;;){ while( j<=pNode->n ){ - if( pNode[j].jnFlags & (JNODE_REMOVE|JNODE_REPLACE) ){ - if( pNode[j].jnFlags & JNODE_REPLACE ){ - jsonAppendSeparator(pOut); - jsonAppendValue(pOut, aReplace[pNode[j].iVal]); - } - }else{ + if( (pNode[j].jnFlags & JNODE_REMOVE)==0 ){ jsonAppendSeparator(pOut); jsonRenderNode(&pNode[j], pOut, aReplace); } @@ -178702,11 +188229,7 @@ static void jsonRenderNode( jsonAppendSeparator(pOut); jsonRenderNode(&pNode[j], pOut, aReplace); jsonAppendChar(pOut, ':'); - if( pNode[j+1].jnFlags & JNODE_REPLACE ){ - jsonAppendValue(pOut, aReplace[pNode[j+1].iVal]); - }else{ - jsonRenderNode(&pNode[j+1], pOut, aReplace); - } + jsonRenderNode(&pNode[j+1], pOut, aReplace); } j += 1 + jsonNodeSize(&pNode[j+1]); } @@ -178933,7 +188456,6 @@ static int jsonParseAddNode( p = &pParse->aNode[pParse->nNode]; p->eType = (u8)eType; p->jnFlags = 0; - p->iVal = 0; p->n = n; p->u.zJContent = zContent; return pParse->nNode++; @@ -178962,15 +188484,18 @@ static int jsonParseValue(JsonParse *pParse, u32 i){ int iThis; int x; JsonNode *pNode; - while( safe_isspace(pParse->zJson[i]) ){ i++; } - if( (c = pParse->zJson[i])=='{' ){ + const char *z = pParse->zJson; + while( safe_isspace(z[i]) ){ i++; } + if( (c = z[i])=='{' ){ /* Parse object */ iThis = jsonParseAddNode(pParse, JSON_OBJECT, 0, 0); if( iThis<0 ) return -1; for(j=i+1;;j++){ - while( safe_isspace(pParse->zJson[j]) ){ j++; } + while( safe_isspace(z[j]) ){ j++; } + if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1; x = jsonParseValue(pParse, j); if( x<0 ){ + pParse->iDepth--; if( x==(-2) && pParse->nNode==(u32)iThis+1 ) return j+1; return -1; } @@ -178979,14 +188504,15 @@ static int jsonParseValue(JsonParse *pParse, u32 i){ if( pNode->eType!=JSON_STRING ) return -1; pNode->jnFlags |= JNODE_LABEL; j = x; - while( safe_isspace(pParse->zJson[j]) ){ j++; } - if( pParse->zJson[j]!=':' ) return -1; + while( safe_isspace(z[j]) ){ j++; } + if( z[j]!=':' ) return -1; j++; x = jsonParseValue(pParse, j); + pParse->iDepth--; if( x<0 ) return -1; j = x; - while( safe_isspace(pParse->zJson[j]) ){ j++; } - c = pParse->zJson[j]; + while( safe_isspace(z[j]) ){ j++; } + c = z[j]; if( c==',' ) continue; if( c!='}' ) return -1; break; @@ -178998,15 +188524,17 @@ static int jsonParseValue(JsonParse *pParse, u32 i){ iThis = jsonParseAddNode(pParse, JSON_ARRAY, 0, 0); if( iThis<0 ) return -1; for(j=i+1;;j++){ - while( safe_isspace(pParse->zJson[j]) ){ j++; } + while( safe_isspace(z[j]) ){ j++; } + if( ++pParse->iDepth > JSON_MAX_DEPTH ) return -1; x = jsonParseValue(pParse, j); + pParse->iDepth--; if( x<0 ){ if( x==(-3) && pParse->nNode==(u32)iThis+1 ) return j+1; return -1; } j = x; - while( safe_isspace(pParse->zJson[j]) ){ j++; } - c = pParse->zJson[j]; + while( safe_isspace(z[j]) ){ j++; } + c = z[j]; if( c==',' ) continue; if( c!=']' ) return -1; break; @@ -179018,13 +188546,16 @@ static int jsonParseValue(JsonParse *pParse, u32 i){ u8 jnFlags = 0; j = i+1; for(;;){ - c = pParse->zJson[j]; - if( c==0 ) return -1; + c = z[j]; + if( (c & ~0x1f)==0 ){ + /* Control characters are not allowed in strings */ + return -1; + } if( c=='\\' ){ - c = pParse->zJson[++j]; + c = z[++j]; if( c=='"' || c=='\\' || c=='/' || c=='b' || c=='f' || c=='n' || c=='r' || c=='t' - || (c=='u' && jsonIs4Hex(pParse->zJson+j+1)) ){ + || (c=='u' && jsonIs4Hex(z+j+1)) ){ jnFlags = JNODE_ESCAPE; }else{ return -1; @@ -179034,55 +188565,60 @@ static int jsonParseValue(JsonParse *pParse, u32 i){ } j++; } - jsonParseAddNode(pParse, JSON_STRING, j+1-i, &pParse->zJson[i]); + jsonParseAddNode(pParse, JSON_STRING, j+1-i, &z[i]); if( !pParse->oom ) pParse->aNode[pParse->nNode-1].jnFlags = jnFlags; return j+1; }else if( c=='n' - && strncmp(pParse->zJson+i,"null",4)==0 - && !safe_isalnum(pParse->zJson[i+4]) ){ + && strncmp(z+i,"null",4)==0 + && !safe_isalnum(z[i+4]) ){ jsonParseAddNode(pParse, JSON_NULL, 0, 0); return i+4; }else if( c=='t' - && strncmp(pParse->zJson+i,"true",4)==0 - && !safe_isalnum(pParse->zJson[i+4]) ){ + && strncmp(z+i,"true",4)==0 + && !safe_isalnum(z[i+4]) ){ jsonParseAddNode(pParse, JSON_TRUE, 0, 0); return i+4; }else if( c=='f' - && strncmp(pParse->zJson+i,"false",5)==0 - && !safe_isalnum(pParse->zJson[i+5]) ){ + && strncmp(z+i,"false",5)==0 + && !safe_isalnum(z[i+5]) ){ jsonParseAddNode(pParse, JSON_FALSE, 0, 0); return i+5; }else if( c=='-' || (c>='0' && c<='9') ){ /* Parse number */ u8 seenDP = 0; u8 seenE = 0; + assert( '-' < '0' ); + if( c<='0' ){ + j = c=='-' ? i+1 : i; + if( z[j]=='0' && z[j+1]>='0' && z[j+1]<='9' ) return -1; + } j = i+1; for(;; j++){ - c = pParse->zJson[j]; + c = z[j]; if( c>='0' && c<='9' ) continue; if( c=='.' ){ - if( pParse->zJson[j-1]=='-' ) return -1; + if( z[j-1]=='-' ) return -1; if( seenDP ) return -1; seenDP = 1; continue; } if( c=='e' || c=='E' ){ - if( pParse->zJson[j-1]<'0' ) return -1; + if( z[j-1]<'0' ) return -1; if( seenE ) return -1; seenDP = seenE = 1; - c = pParse->zJson[j+1]; + c = z[j+1]; if( c=='+' || c=='-' ){ j++; - c = pParse->zJson[j+1]; + c = z[j+1]; } if( c<'0' || c>'9' ) return -1; continue; } break; } - if( pParse->zJson[j-1]<'0' ) return -1; + if( z[j-1]<'0' ) return -1; jsonParseAddNode(pParse, seenDP ? JSON_REAL : JSON_INT, - j - i, &pParse->zJson[i]); + j - i, &z[i]); return j; }else if( c=='}' ){ return -2; /* End of {...} */ @@ -179114,6 +188650,7 @@ static int jsonParse( i = jsonParseValue(pParse, 0); if( pParse->oom ) i = -1; if( i>0 ){ + assert( pParse->iDepth==0 ); while( safe_isspace(zJson[i]) ) i++; if( zJson[i] ) i = -1; } @@ -179174,6 +188711,49 @@ static int jsonParseFindParents(JsonParse *pParse){ } /* +** Magic number used for the JSON parse cache in sqlite3_get_auxdata() +*/ +#define JSON_CACHE_ID (-429938) + +/* +** Obtain a complete parse of the JSON found in the first argument +** of the argv array. Use the sqlite3_get_auxdata() cache for this +** parse if it is available. If the cache is not available or if it +** is no longer valid, parse the JSON again and return the new parse, +** and also register the new parse so that it will be available for +** future sqlite3_get_auxdata() calls. +*/ +static JsonParse *jsonParseCached( + sqlite3_context *pCtx, + sqlite3_value **argv +){ + const char *zJson = (const char*)sqlite3_value_text(argv[0]); + int nJson = sqlite3_value_bytes(argv[0]); + JsonParse *p; + if( zJson==0 ) return 0; + p = (JsonParse*)sqlite3_get_auxdata(pCtx, JSON_CACHE_ID); + if( p && p->nJson==nJson && memcmp(p->zJson,zJson,nJson)==0 ){ + p->nErr = 0; + return p; /* The cached entry matches, so return it */ + } + p = sqlite3_malloc( sizeof(*p) + nJson + 1 ); + if( p==0 ){ + sqlite3_result_error_nomem(pCtx); + return 0; + } + memset(p, 0, sizeof(*p)); + p->zJson = (char*)&p[1]; + memcpy((char*)p->zJson, zJson, nJson+1); + if( jsonParse(p, pCtx, p->zJson) ){ + sqlite3_free(p); + return 0; + } + p->nJson = nJson; + sqlite3_set_auxdata(pCtx, JSON_CACHE_ID, p, (void(*)(void*))jsonParseFree); + return (JsonParse*)sqlite3_get_auxdata(pCtx, JSON_CACHE_ID); +} + +/* ** Compare the OBJECT label at pNode against zKey,nKey. Return true on ** a match. */ @@ -179399,6 +188979,25 @@ static void jsonWrongNumArgs( sqlite3_free(zMsg); } +/* +** Mark all NULL entries in the Object passed in as JNODE_REMOVE. +*/ +static void jsonRemoveAllNulls(JsonNode *pNode){ + int i, n; + assert( pNode->eType==JSON_OBJECT ); + n = pNode->n; + for(i=2; i<=n; i += jsonNodeSize(&pNode[i])+1){ + switch( pNode[i].eType ){ + case JSON_NULL: + pNode[i].jnFlags |= JNODE_REMOVE; + break; + case JSON_OBJECT: + jsonRemoveAllNulls(&pNode[i]); + break; + } + } +} + /**************************************************************************** ** SQL functions used for testing and debugging @@ -179519,29 +189118,30 @@ static void jsonArrayLengthFunc( int argc, sqlite3_value **argv ){ - JsonParse x; /* The parse */ + JsonParse *p; /* The parse */ sqlite3_int64 n = 0; u32 i; JsonNode *pNode; - if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; - assert( x.nNode ); + p = jsonParseCached(ctx, argv); + if( p==0 ) return; + assert( p->nNode ); if( argc==2 ){ const char *zPath = (const char*)sqlite3_value_text(argv[1]); - pNode = jsonLookup(&x, zPath, 0, ctx); + pNode = jsonLookup(p, zPath, 0, ctx); }else{ - pNode = x.aNode; + pNode = p->aNode; } if( pNode==0 ){ - x.nErr = 1; - }else if( pNode->eType==JSON_ARRAY ){ + return; + } + if( pNode->eType==JSON_ARRAY ){ assert( (pNode->jnFlags & JNODE_APPEND)==0 ); for(i=1; i<=pNode->n; n++){ i += jsonNodeSize(&pNode[i]); } } - if( x.nErr==0 ) sqlite3_result_int64(ctx, n); - jsonParseReset(&x); + sqlite3_result_int64(ctx, n); } /* @@ -179557,20 +189157,21 @@ static void jsonExtractFunc( int argc, sqlite3_value **argv ){ - JsonParse x; /* The parse */ + JsonParse *p; /* The parse */ JsonNode *pNode; const char *zPath; JsonString jx; int i; if( argc<2 ) return; - if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; + p = jsonParseCached(ctx, argv); + if( p==0 ) return; jsonInit(&jx, ctx); jsonAppendChar(&jx, '['); for(i=1; i<argc; i++){ zPath = (const char*)sqlite3_value_text(argv[i]); - pNode = jsonLookup(&x, zPath, 0, ctx); - if( x.nErr ) break; + pNode = jsonLookup(p, zPath, 0, ctx); + if( p->nErr ) break; if( argc>2 ){ jsonAppendSeparator(&jx); if( pNode ){ @@ -179588,9 +189189,107 @@ static void jsonExtractFunc( sqlite3_result_subtype(ctx, JSON_SUBTYPE); } jsonReset(&jx); +} + +/* This is the RFC 7396 MergePatch algorithm. +*/ +static JsonNode *jsonMergePatch( + JsonParse *pParse, /* The JSON parser that contains the TARGET */ + u32 iTarget, /* Node of the TARGET in pParse */ + JsonNode *pPatch /* The PATCH */ +){ + u32 i, j; + u32 iRoot; + JsonNode *pTarget; + if( pPatch->eType!=JSON_OBJECT ){ + return pPatch; + } + assert( iTarget>=0 && iTarget<pParse->nNode ); + pTarget = &pParse->aNode[iTarget]; + assert( (pPatch->jnFlags & JNODE_APPEND)==0 ); + if( pTarget->eType!=JSON_OBJECT ){ + jsonRemoveAllNulls(pPatch); + return pPatch; + } + iRoot = iTarget; + for(i=1; i<pPatch->n; i += jsonNodeSize(&pPatch[i+1])+1){ + u32 nKey; + const char *zKey; + assert( pPatch[i].eType==JSON_STRING ); + assert( pPatch[i].jnFlags & JNODE_LABEL ); + nKey = pPatch[i].n; + zKey = pPatch[i].u.zJContent; + assert( (pPatch[i].jnFlags & JNODE_RAW)==0 ); + for(j=1; j<pTarget->n; j += jsonNodeSize(&pTarget[j+1])+1 ){ + assert( pTarget[j].eType==JSON_STRING ); + assert( pTarget[j].jnFlags & JNODE_LABEL ); + assert( (pPatch[i].jnFlags & JNODE_RAW)==0 ); + if( pTarget[j].n==nKey && strncmp(pTarget[j].u.zJContent,zKey,nKey)==0 ){ + if( pTarget[j+1].jnFlags & (JNODE_REMOVE|JNODE_PATCH) ) break; + if( pPatch[i+1].eType==JSON_NULL ){ + pTarget[j+1].jnFlags |= JNODE_REMOVE; + }else{ + JsonNode *pNew = jsonMergePatch(pParse, iTarget+j+1, &pPatch[i+1]); + if( pNew==0 ) return 0; + pTarget = &pParse->aNode[iTarget]; + if( pNew!=&pTarget[j+1] ){ + pTarget[j+1].u.pPatch = pNew; + pTarget[j+1].jnFlags |= JNODE_PATCH; + } + } + break; + } + } + if( j>=pTarget->n && pPatch[i+1].eType!=JSON_NULL ){ + int iStart, iPatch; + iStart = jsonParseAddNode(pParse, JSON_OBJECT, 2, 0); + jsonParseAddNode(pParse, JSON_STRING, nKey, zKey); + iPatch = jsonParseAddNode(pParse, JSON_TRUE, 0, 0); + if( pParse->oom ) return 0; + jsonRemoveAllNulls(pPatch); + pTarget = &pParse->aNode[iTarget]; + pParse->aNode[iRoot].jnFlags |= JNODE_APPEND; + pParse->aNode[iRoot].u.iAppend = iStart - iRoot; + iRoot = iStart; + pParse->aNode[iPatch].jnFlags |= JNODE_PATCH; + pParse->aNode[iPatch].u.pPatch = &pPatch[i+1]; + } + } + return pTarget; +} + +/* +** Implementation of the json_mergepatch(JSON1,JSON2) function. Return a JSON +** object that is the result of running the RFC 7396 MergePatch() algorithm +** on the two arguments. +*/ +static void jsonPatchFunc( + sqlite3_context *ctx, + int argc, + sqlite3_value **argv +){ + JsonParse x; /* The JSON that is being patched */ + JsonParse y; /* The patch */ + JsonNode *pResult; /* The result of the merge */ + + UNUSED_PARAM(argc); + if( jsonParse(&x, ctx, (const char*)sqlite3_value_text(argv[0])) ) return; + if( jsonParse(&y, ctx, (const char*)sqlite3_value_text(argv[1])) ){ + jsonParseReset(&x); + return; + } + pResult = jsonMergePatch(&x, 0, y.aNode); + assert( pResult!=0 || x.oom ); + if( pResult ){ + jsonReturnJson(pResult, ctx, 0); + }else{ + sqlite3_result_error_nomem(ctx); + } jsonParseReset(&x); + jsonParseReset(&y); } + /* ** Implementation of the json_object(NAME,VALUE,...) function. Return a JSON ** object that contains all name/value given in arguments. Or if any name @@ -179694,11 +189393,11 @@ static void jsonReplaceFunc( if( x.nErr ) goto replace_err; if( pNode ){ pNode->jnFlags |= (u8)JNODE_REPLACE; - pNode->iVal = (u8)(i+1); + pNode->u.iReplace = i + 1; } } if( x.aNode[0].jnFlags & JNODE_REPLACE ){ - sqlite3_result_value(ctx, argv[x.aNode[0].iVal]); + sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]); }else{ jsonReturnJson(x.aNode, ctx, argv); } @@ -179748,11 +189447,11 @@ static void jsonSetFunc( goto jsonSetDone; }else if( pNode && (bApnd || bIsSet) ){ pNode->jnFlags |= (u8)JNODE_REPLACE; - pNode->iVal = (u8)(i+1); + pNode->u.iReplace = i + 1; } } if( x.aNode[0].jnFlags & JNODE_REPLACE ){ - sqlite3_result_value(ctx, argv[x.aNode[0].iVal]); + sqlite3_result_value(ctx, argv[x.aNode[0].u.iReplace]); }else{ jsonReturnJson(x.aNode, ctx, argv); } @@ -180156,7 +189855,7 @@ static int jsonEachColumn( } if( p->eType==JSON_ARRAY ){ jsonPrintf(30, &x, "[%d]", p->iRowid); - }else{ + }else if( p->eType==JSON_OBJECT ){ jsonPrintf(pThis->n, &x, ".%.*s", pThis->n-2, pThis->u.zJContent+1); } } @@ -180395,6 +190094,7 @@ SQLITE_PRIVATE int sqlite3Json1Init(sqlite3 *db){ { "json_extract", -1, 0, jsonExtractFunc }, { "json_insert", -1, 0, jsonSetFunc }, { "json_object", -1, 0, jsonObjectFunc }, + { "json_patch", 2, 0, jsonPatchFunc }, { "json_quote", 1, 0, jsonQuoteFunc }, { "json_remove", -1, 0, jsonRemoveFunc }, { "json_replace", -1, 0, jsonReplaceFunc }, @@ -181088,7 +190788,9 @@ typedef short i16; typedef sqlite3_int64 i64; typedef sqlite3_uint64 u64; -#define ArraySize(x) ((int)(sizeof(x) / sizeof(x[0]))) +#ifndef ArraySize +# define ArraySize(x) ((int)(sizeof(x) / sizeof(x[0]))) +#endif #define testcase(x) #define ALWAYS(x) 1 @@ -181502,9 +191204,9 @@ static int sqlite3Fts5IndexBeginWrite( /* ** Flush any data stored in the in-memory hash tables to the database. -** If the bCommit flag is true, also close any open blob handles. +** Also close any open blob handles. */ -static int sqlite3Fts5IndexSync(Fts5Index *p, int bCommit); +static int sqlite3Fts5IndexSync(Fts5Index *p); /* ** Discard any data stored in the in-memory hash tables. Do not write it @@ -181674,7 +191376,7 @@ static int sqlite3Fts5StorageDocsize(Fts5Storage *p, i64 iRowid, int *aCol); static int sqlite3Fts5StorageSize(Fts5Storage *p, int iCol, i64 *pnAvg); static int sqlite3Fts5StorageRowCount(Fts5Storage *p, i64 *pnRow); -static int sqlite3Fts5StorageSync(Fts5Storage *p, int bCommit); +static int sqlite3Fts5StorageSync(Fts5Storage *p); static int sqlite3Fts5StorageRollback(Fts5Storage *p); static int sqlite3Fts5StorageConfigValue( @@ -181710,6 +191412,7 @@ struct Fts5Token { /* Parse a MATCH expression. */ static int sqlite3Fts5ExprNew( Fts5Config *pConfig, + int iCol, /* Column on LHS of MATCH operator */ const char *zExpr, Fts5Expr **ppNew, char **pzErr @@ -181777,6 +191480,8 @@ static Fts5ExprPhrase *sqlite3Fts5ParseTerm( int bPrefix ); +static void sqlite3Fts5ParseSetCaret(Fts5ExprPhrase*); + static Fts5ExprNearset *sqlite3Fts5ParseNearset( Fts5Parse*, Fts5ExprNearset*, @@ -181794,7 +191499,7 @@ static void sqlite3Fts5ParseNearsetFree(Fts5ExprNearset*); static void sqlite3Fts5ParseNodeFree(Fts5ExprNode*); static void sqlite3Fts5ParseSetDistance(Fts5Parse*, Fts5ExprNearset*, Fts5Token*); -static void sqlite3Fts5ParseSetColset(Fts5Parse*, Fts5ExprNearset*, Fts5Colset*); +static void sqlite3Fts5ParseSetColset(Fts5Parse*, Fts5ExprNode*, Fts5Colset*); static Fts5Colset *sqlite3Fts5ParseColsetInvert(Fts5Parse*, Fts5Colset*); static void sqlite3Fts5ParseFinished(Fts5Parse *pParse, Fts5ExprNode *p); static void sqlite3Fts5ParseNear(Fts5Parse *pParse, Fts5Token*); @@ -181851,15 +191556,16 @@ static int sqlite3Fts5UnicodeFold(int c, int bRemoveDiacritic); #define FTS5_NOT 3 #define FTS5_TERM 4 #define FTS5_COLON 5 -#define FTS5_LP 6 -#define FTS5_RP 7 -#define FTS5_MINUS 8 -#define FTS5_LCP 9 -#define FTS5_RCP 10 -#define FTS5_STRING 11 -#define FTS5_COMMA 12 -#define FTS5_PLUS 13 -#define FTS5_STAR 14 +#define FTS5_MINUS 6 +#define FTS5_LCP 7 +#define FTS5_RCP 8 +#define FTS5_STRING 9 +#define FTS5_LP 10 +#define FTS5_RP 11 +#define FTS5_CARET 12 +#define FTS5_COMMA 13 +#define FTS5_PLUS 14 +#define FTS5_STAR 15 /* ** 2000-05-29 @@ -181954,26 +191660,30 @@ static int sqlite3Fts5UnicodeFold(int c, int bRemoveDiacritic); ** zero the stack is dynamically sized using realloc() ** sqlite3Fts5ParserARG_SDECL A static variable declaration for the %extra_argument ** sqlite3Fts5ParserARG_PDECL A parameter declaration for the %extra_argument +** sqlite3Fts5ParserARG_PARAM Code to pass %extra_argument as a subroutine parameter ** sqlite3Fts5ParserARG_STORE Code to store %extra_argument into fts5yypParser ** sqlite3Fts5ParserARG_FETCH Code to extract %extra_argument from fts5yypParser +** sqlite3Fts5ParserCTX_* As sqlite3Fts5ParserARG_ except for %extra_context ** fts5YYERRORSYMBOL is the code number of the error symbol. If not ** defined, then do no error processing. ** fts5YYNSTATE the combined number of states. ** fts5YYNRULE the number of rules in the grammar +** fts5YYNFTS5TOKEN Number of terminal symbols ** fts5YY_MAX_SHIFT Maximum value for shift actions ** fts5YY_MIN_SHIFTREDUCE Minimum value for shift-reduce actions ** fts5YY_MAX_SHIFTREDUCE Maximum value for shift-reduce actions -** fts5YY_MIN_REDUCE Maximum value for reduce actions ** fts5YY_ERROR_ACTION The fts5yy_action[] code for syntax error ** fts5YY_ACCEPT_ACTION The fts5yy_action[] code for accept ** fts5YY_NO_ACTION The fts5yy_action[] code for no-op +** fts5YY_MIN_REDUCE Minimum value for reduce actions +** fts5YY_MAX_REDUCE Maximum value for reduce actions */ #ifndef INTERFACE # define INTERFACE 1 #endif /************* Begin control #defines *****************************************/ #define fts5YYCODETYPE unsigned char -#define fts5YYNOCODE 28 +#define fts5YYNOCODE 27 #define fts5YYACTIONTYPE unsigned char #define sqlite3Fts5ParserFTS5TOKENTYPE Fts5Token typedef union { @@ -181990,18 +191700,25 @@ typedef union { #endif #define sqlite3Fts5ParserARG_SDECL Fts5Parse *pParse; #define sqlite3Fts5ParserARG_PDECL ,Fts5Parse *pParse -#define sqlite3Fts5ParserARG_FETCH Fts5Parse *pParse = fts5yypParser->pParse -#define sqlite3Fts5ParserARG_STORE fts5yypParser->pParse = pParse -#define fts5YYNSTATE 29 -#define fts5YYNRULE 26 -#define fts5YY_MAX_SHIFT 28 -#define fts5YY_MIN_SHIFTREDUCE 45 -#define fts5YY_MAX_SHIFTREDUCE 70 -#define fts5YY_MIN_REDUCE 71 -#define fts5YY_MAX_REDUCE 96 -#define fts5YY_ERROR_ACTION 97 -#define fts5YY_ACCEPT_ACTION 98 -#define fts5YY_NO_ACTION 99 +#define sqlite3Fts5ParserARG_PARAM ,pParse +#define sqlite3Fts5ParserARG_FETCH Fts5Parse *pParse=fts5yypParser->pParse; +#define sqlite3Fts5ParserARG_STORE fts5yypParser->pParse=pParse; +#define sqlite3Fts5ParserCTX_SDECL +#define sqlite3Fts5ParserCTX_PDECL +#define sqlite3Fts5ParserCTX_PARAM +#define sqlite3Fts5ParserCTX_FETCH +#define sqlite3Fts5ParserCTX_STORE +#define fts5YYNSTATE 35 +#define fts5YYNRULE 28 +#define fts5YYNFTS5TOKEN 16 +#define fts5YY_MAX_SHIFT 34 +#define fts5YY_MIN_SHIFTREDUCE 52 +#define fts5YY_MAX_SHIFTREDUCE 79 +#define fts5YY_ERROR_ACTION 80 +#define fts5YY_ACCEPT_ACTION 81 +#define fts5YY_NO_ACTION 82 +#define fts5YY_MIN_REDUCE 83 +#define fts5YY_MAX_REDUCE 110 /************* End control #defines *******************************************/ /* Define the fts5yytestcase() macro to be a no-op if is not already defined @@ -182031,9 +191748,6 @@ typedef union { ** N between fts5YY_MIN_SHIFTREDUCE Shift to an arbitrary state then ** and fts5YY_MAX_SHIFTREDUCE reduce by rule N-fts5YY_MIN_SHIFTREDUCE. ** -** N between fts5YY_MIN_REDUCE Reduce by rule N-fts5YY_MIN_REDUCE -** and fts5YY_MAX_REDUCE -** ** N == fts5YY_ERROR_ACTION A syntax error has occurred. ** ** N == fts5YY_ACCEPT_ACTION The parser accepts its input. @@ -182041,25 +191755,22 @@ typedef union { ** N == fts5YY_NO_ACTION No such action. Denotes unused ** slots in the fts5yy_action[] table. ** +** N between fts5YY_MIN_REDUCE Reduce by rule N-fts5YY_MIN_REDUCE +** and fts5YY_MAX_REDUCE +** ** The action table is constructed as a single large table named fts5yy_action[]. ** Given state S and lookahead X, the action is computed as either: ** ** (A) N = fts5yy_action[ fts5yy_shift_ofst[S] + X ] ** (B) N = fts5yy_default[S] ** -** The (A) formula is preferred. The B formula is used instead if: -** (1) The fts5yy_shift_ofst[S]+X value is out of range, or -** (2) fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X, or -** (3) fts5yy_shift_ofst[S] equal fts5YY_SHIFT_USE_DFLT. -** (Implementation note: fts5YY_SHIFT_USE_DFLT is chosen so that -** fts5YY_SHIFT_USE_DFLT+X will be out of range for all possible lookaheads X. -** Hence only tests (1) and (2) need to be evaluated.) +** The (A) formula is preferred. The B formula is used instead if +** fts5yy_lookahead[fts5yy_shift_ofst[S]+X] is not equal to X. ** ** The formulas above are for computing the action when the lookahead is ** a terminal symbol. If the lookahead is a non-terminal (as occurs after ** a reduce action) then the fts5yy_reduce_ofst[] array is used in place of -** the fts5yy_shift_ofst[] array and fts5YY_REDUCE_USE_DFLT is used in place of -** fts5YY_SHIFT_USE_DFLT. +** the fts5yy_shift_ofst[] array. ** ** The following are the tables generated in this section: ** @@ -182073,50 +191784,56 @@ typedef union { ** fts5yy_default[] Default action for each state. ** *********** Begin parsing tables **********************************************/ -#define fts5YY_ACTTAB_COUNT (85) +#define fts5YY_ACTTAB_COUNT (105) static const fts5YYACTIONTYPE fts5yy_action[] = { - /* 0 */ 98, 16, 51, 5, 53, 27, 83, 7, 26, 15, - /* 10 */ 51, 5, 53, 27, 13, 69, 26, 48, 51, 5, - /* 20 */ 53, 27, 19, 11, 26, 9, 20, 51, 5, 53, - /* 30 */ 27, 13, 22, 26, 28, 51, 5, 53, 27, 68, - /* 40 */ 1, 26, 19, 11, 17, 9, 52, 10, 53, 27, - /* 50 */ 23, 24, 26, 54, 3, 4, 2, 26, 6, 21, - /* 60 */ 49, 71, 3, 4, 2, 7, 56, 59, 55, 59, - /* 70 */ 4, 2, 12, 69, 58, 60, 18, 67, 62, 69, - /* 80 */ 25, 66, 8, 14, 2, + /* 0 */ 81, 20, 96, 6, 28, 99, 98, 26, 26, 18, + /* 10 */ 96, 6, 28, 17, 98, 56, 26, 19, 96, 6, + /* 20 */ 28, 14, 98, 14, 26, 31, 92, 96, 6, 28, + /* 30 */ 108, 98, 25, 26, 21, 96, 6, 28, 78, 98, + /* 40 */ 58, 26, 29, 96, 6, 28, 107, 98, 22, 26, + /* 50 */ 24, 16, 12, 11, 1, 13, 13, 24, 16, 23, + /* 60 */ 11, 33, 34, 13, 97, 8, 27, 32, 98, 7, + /* 70 */ 26, 3, 4, 5, 3, 4, 5, 3, 83, 4, + /* 80 */ 5, 3, 63, 5, 3, 62, 12, 2, 86, 13, + /* 90 */ 9, 30, 10, 10, 54, 57, 75, 78, 78, 53, + /* 100 */ 57, 15, 82, 82, 71, }; static const fts5YYCODETYPE fts5yy_lookahead[] = { - /* 0 */ 16, 17, 18, 19, 20, 21, 5, 6, 24, 17, - /* 10 */ 18, 19, 20, 21, 11, 14, 24, 17, 18, 19, - /* 20 */ 20, 21, 8, 9, 24, 11, 17, 18, 19, 20, - /* 30 */ 21, 11, 12, 24, 17, 18, 19, 20, 21, 26, - /* 40 */ 6, 24, 8, 9, 22, 11, 18, 11, 20, 21, - /* 50 */ 24, 25, 24, 20, 1, 2, 3, 24, 23, 24, - /* 60 */ 7, 0, 1, 2, 3, 6, 10, 11, 10, 11, - /* 70 */ 2, 3, 9, 14, 11, 11, 22, 26, 7, 14, - /* 80 */ 13, 11, 5, 11, 3, + /* 0 */ 16, 17, 18, 19, 20, 22, 22, 24, 24, 17, + /* 10 */ 18, 19, 20, 7, 22, 9, 24, 17, 18, 19, + /* 20 */ 20, 9, 22, 9, 24, 13, 17, 18, 19, 20, + /* 30 */ 26, 22, 24, 24, 17, 18, 19, 20, 15, 22, + /* 40 */ 9, 24, 17, 18, 19, 20, 26, 22, 21, 24, + /* 50 */ 6, 7, 9, 9, 10, 12, 12, 6, 7, 21, + /* 60 */ 9, 24, 25, 12, 18, 5, 20, 14, 22, 5, + /* 70 */ 24, 3, 1, 2, 3, 1, 2, 3, 0, 1, + /* 80 */ 2, 3, 11, 2, 3, 11, 9, 10, 5, 12, + /* 90 */ 23, 24, 10, 10, 8, 9, 9, 15, 15, 8, + /* 100 */ 9, 9, 27, 27, 11, 27, 27, 27, 27, 27, + /* 110 */ 27, 27, 27, 27, 27, 27, 27, 27, 27, 27, + /* 120 */ 27, }; -#define fts5YY_SHIFT_USE_DFLT (85) -#define fts5YY_SHIFT_COUNT (28) +#define fts5YY_SHIFT_COUNT (34) #define fts5YY_SHIFT_MIN (0) -#define fts5YY_SHIFT_MAX (81) +#define fts5YY_SHIFT_MAX (93) static const unsigned char fts5yy_shift_ofst[] = { - /* 0 */ 34, 34, 34, 34, 34, 14, 20, 3, 36, 1, - /* 10 */ 59, 64, 64, 65, 65, 53, 61, 56, 58, 63, - /* 20 */ 68, 67, 70, 67, 71, 72, 67, 77, 81, + /* 0 */ 44, 44, 44, 44, 44, 44, 51, 77, 43, 12, + /* 10 */ 14, 83, 82, 14, 23, 23, 31, 31, 71, 74, + /* 20 */ 78, 81, 86, 91, 6, 53, 53, 60, 64, 68, + /* 30 */ 53, 87, 92, 53, 93, }; -#define fts5YY_REDUCE_USE_DFLT (-17) -#define fts5YY_REDUCE_COUNT (14) -#define fts5YY_REDUCE_MIN (-16) -#define fts5YY_REDUCE_MAX (54) +#define fts5YY_REDUCE_COUNT (17) +#define fts5YY_REDUCE_MIN (-17) +#define fts5YY_REDUCE_MAX (67) static const signed char fts5yy_reduce_ofst[] = { - /* 0 */ -16, -8, 0, 9, 17, 28, 26, 35, 33, 13, - /* 10 */ 13, 22, 54, 13, 51, + /* 0 */ -16, -8, 0, 9, 17, 25, 46, -17, -17, 37, + /* 10 */ 67, 4, 4, 8, 4, 20, 27, 38, }; static const fts5YYACTIONTYPE fts5yy_default[] = { - /* 0 */ 97, 97, 97, 97, 97, 76, 91, 97, 97, 96, - /* 10 */ 96, 97, 97, 96, 96, 97, 97, 97, 97, 97, - /* 20 */ 73, 89, 97, 90, 97, 97, 87, 97, 72, + /* 0 */ 80, 80, 80, 80, 80, 80, 95, 80, 80, 105, + /* 10 */ 80, 110, 110, 80, 110, 110, 80, 80, 80, 80, + /* 20 */ 80, 91, 80, 80, 80, 101, 100, 80, 80, 90, + /* 30 */ 103, 80, 80, 104, 80, }; /********** End of lemon-generated parsing tables *****************************/ @@ -182175,12 +191892,14 @@ struct fts5yyParser { int fts5yyerrcnt; /* Shifts left before out of the error */ #endif sqlite3Fts5ParserARG_SDECL /* A place to hold %extra_argument */ + sqlite3Fts5ParserCTX_SDECL /* A place to hold %extra_context */ #if fts5YYSTACKDEPTH<=0 int fts5yystksz; /* Current side of the stack */ fts5yyStackEntry *fts5yystack; /* The parser's stack */ fts5yyStackEntry fts5yystk0; /* First stack entry */ #else fts5yyStackEntry fts5yystack[fts5YYSTACKDEPTH]; /* The parser's stack */ + fts5yyStackEntry *fts5yystackEnd; /* Last entry in the stack */ #endif }; typedef struct fts5yyParser fts5yyParser; @@ -182217,50 +191936,72 @@ static void sqlite3Fts5ParserTrace(FILE *TraceFILE, char *zTracePrompt){ } #endif /* NDEBUG */ -#ifndef NDEBUG +#if defined(fts5YYCOVERAGE) || !defined(NDEBUG) /* For tracing shifts, the names of all terminals and nonterminals ** are required. The following table supplies these names */ static const char *const fts5yyTokenName[] = { - "$", "OR", "AND", "NOT", - "TERM", "COLON", "LP", "RP", - "MINUS", "LCP", "RCP", "STRING", - "COMMA", "PLUS", "STAR", "error", - "input", "expr", "cnearset", "exprlist", - "nearset", "colset", "colsetlist", "nearphrases", - "phrase", "neardist_opt", "star_opt", + /* 0 */ "$", + /* 1 */ "OR", + /* 2 */ "AND", + /* 3 */ "NOT", + /* 4 */ "TERM", + /* 5 */ "COLON", + /* 6 */ "MINUS", + /* 7 */ "LCP", + /* 8 */ "RCP", + /* 9 */ "STRING", + /* 10 */ "LP", + /* 11 */ "RP", + /* 12 */ "CARET", + /* 13 */ "COMMA", + /* 14 */ "PLUS", + /* 15 */ "STAR", + /* 16 */ "input", + /* 17 */ "expr", + /* 18 */ "cnearset", + /* 19 */ "exprlist", + /* 20 */ "colset", + /* 21 */ "colsetlist", + /* 22 */ "nearset", + /* 23 */ "nearphrases", + /* 24 */ "phrase", + /* 25 */ "neardist_opt", + /* 26 */ "star_opt", }; -#endif /* NDEBUG */ +#endif /* defined(fts5YYCOVERAGE) || !defined(NDEBUG) */ #ifndef NDEBUG /* For tracing reduce actions, the names of all rules are required. */ static const char *const fts5yyRuleName[] = { /* 0 */ "input ::= expr", - /* 1 */ "expr ::= expr AND expr", - /* 2 */ "expr ::= expr OR expr", - /* 3 */ "expr ::= expr NOT expr", - /* 4 */ "expr ::= LP expr RP", - /* 5 */ "expr ::= exprlist", - /* 6 */ "exprlist ::= cnearset", - /* 7 */ "exprlist ::= exprlist cnearset", - /* 8 */ "cnearset ::= nearset", - /* 9 */ "cnearset ::= colset COLON nearset", - /* 10 */ "colset ::= MINUS LCP colsetlist RCP", - /* 11 */ "colset ::= LCP colsetlist RCP", - /* 12 */ "colset ::= STRING", - /* 13 */ "colset ::= MINUS STRING", - /* 14 */ "colsetlist ::= colsetlist STRING", - /* 15 */ "colsetlist ::= STRING", - /* 16 */ "nearset ::= phrase", - /* 17 */ "nearset ::= STRING LP nearphrases neardist_opt RP", - /* 18 */ "nearphrases ::= phrase", - /* 19 */ "nearphrases ::= nearphrases phrase", - /* 20 */ "neardist_opt ::=", - /* 21 */ "neardist_opt ::= COMMA STRING", - /* 22 */ "phrase ::= phrase PLUS STRING star_opt", - /* 23 */ "phrase ::= STRING star_opt", - /* 24 */ "star_opt ::= STAR", - /* 25 */ "star_opt ::=", + /* 1 */ "colset ::= MINUS LCP colsetlist RCP", + /* 2 */ "colset ::= LCP colsetlist RCP", + /* 3 */ "colset ::= STRING", + /* 4 */ "colset ::= MINUS STRING", + /* 5 */ "colsetlist ::= colsetlist STRING", + /* 6 */ "colsetlist ::= STRING", + /* 7 */ "expr ::= expr AND expr", + /* 8 */ "expr ::= expr OR expr", + /* 9 */ "expr ::= expr NOT expr", + /* 10 */ "expr ::= colset COLON LP expr RP", + /* 11 */ "expr ::= LP expr RP", + /* 12 */ "expr ::= exprlist", + /* 13 */ "exprlist ::= cnearset", + /* 14 */ "exprlist ::= exprlist cnearset", + /* 15 */ "cnearset ::= nearset", + /* 16 */ "cnearset ::= colset COLON nearset", + /* 17 */ "nearset ::= phrase", + /* 18 */ "nearset ::= CARET phrase", + /* 19 */ "nearset ::= STRING LP nearphrases neardist_opt RP", + /* 20 */ "nearphrases ::= phrase", + /* 21 */ "nearphrases ::= nearphrases phrase", + /* 22 */ "neardist_opt ::=", + /* 23 */ "neardist_opt ::= COMMA STRING", + /* 24 */ "phrase ::= phrase PLUS STRING star_opt", + /* 25 */ "phrase ::= STRING star_opt", + /* 26 */ "star_opt ::= STAR", + /* 27 */ "star_opt ::=", }; #endif /* NDEBUG */ @@ -182309,26 +192050,30 @@ static int fts5yyGrowStack(fts5yyParser *p){ /* Initialize a new parser that has already been allocated. */ -static void sqlite3Fts5ParserInit(void *fts5yypParser){ - fts5yyParser *pParser = (fts5yyParser*)fts5yypParser; +static void sqlite3Fts5ParserInit(void *fts5yypRawParser sqlite3Fts5ParserCTX_PDECL){ + fts5yyParser *fts5yypParser = (fts5yyParser*)fts5yypRawParser; + sqlite3Fts5ParserCTX_STORE #ifdef fts5YYTRACKMAXSTACKDEPTH - pParser->fts5yyhwm = 0; + fts5yypParser->fts5yyhwm = 0; #endif #if fts5YYSTACKDEPTH<=0 - pParser->fts5yytos = NULL; - pParser->fts5yystack = NULL; - pParser->fts5yystksz = 0; - if( fts5yyGrowStack(pParser) ){ - pParser->fts5yystack = &pParser->fts5yystk0; - pParser->fts5yystksz = 1; + fts5yypParser->fts5yytos = NULL; + fts5yypParser->fts5yystack = NULL; + fts5yypParser->fts5yystksz = 0; + if( fts5yyGrowStack(fts5yypParser) ){ + fts5yypParser->fts5yystack = &fts5yypParser->fts5yystk0; + fts5yypParser->fts5yystksz = 1; } #endif #ifndef fts5YYNOERRORRECOVERY - pParser->fts5yyerrcnt = -1; + fts5yypParser->fts5yyerrcnt = -1; +#endif + fts5yypParser->fts5yytos = fts5yypParser->fts5yystack; + fts5yypParser->fts5yystack[0].stateno = 0; + fts5yypParser->fts5yystack[0].major = 0; +#if fts5YYSTACKDEPTH>0 + fts5yypParser->fts5yystackEnd = &fts5yypParser->fts5yystack[fts5YYSTACKDEPTH-1]; #endif - pParser->fts5yytos = pParser->fts5yystack; - pParser->fts5yystack[0].stateno = 0; - pParser->fts5yystack[0].major = 0; } #ifndef sqlite3Fts5Parser_ENGINEALWAYSONSTACK @@ -182344,11 +192089,14 @@ static void sqlite3Fts5ParserInit(void *fts5yypParser){ ** A pointer to a parser. This pointer is used in subsequent calls ** to sqlite3Fts5Parser and sqlite3Fts5ParserFree. */ -static void *sqlite3Fts5ParserAlloc(void *(*mallocProc)(fts5YYMALLOCARGTYPE)){ - fts5yyParser *pParser; - pParser = (fts5yyParser*)(*mallocProc)( (fts5YYMALLOCARGTYPE)sizeof(fts5yyParser) ); - if( pParser ) sqlite3Fts5ParserInit(pParser); - return pParser; +static void *sqlite3Fts5ParserAlloc(void *(*mallocProc)(fts5YYMALLOCARGTYPE) sqlite3Fts5ParserCTX_PDECL){ + fts5yyParser *fts5yypParser; + fts5yypParser = (fts5yyParser*)(*mallocProc)( (fts5YYMALLOCARGTYPE)sizeof(fts5yyParser) ); + if( fts5yypParser ){ + sqlite3Fts5ParserCTX_STORE + sqlite3Fts5ParserInit(fts5yypParser sqlite3Fts5ParserCTX_PARAM); + } + return (void*)fts5yypParser; } #endif /* sqlite3Fts5Parser_ENGINEALWAYSONSTACK */ @@ -182365,7 +192113,8 @@ static void fts5yy_destructor( fts5YYCODETYPE fts5yymajor, /* Type code for object to destroy */ fts5YYMINORTYPE *fts5yypminor /* The object to be destroyed */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH switch( fts5yymajor ){ /* Here is inserted the actions which take place when a ** terminal or non-terminal is destroyed. This can happen @@ -182390,16 +192139,16 @@ static void fts5yy_destructor( sqlite3Fts5ParseNodeFree((fts5yypminor->fts5yy24)); } break; - case 20: /* nearset */ - case 23: /* nearphrases */ + case 20: /* colset */ + case 21: /* colsetlist */ { - sqlite3Fts5ParseNearsetFree((fts5yypminor->fts5yy46)); + sqlite3_free((fts5yypminor->fts5yy11)); } break; - case 21: /* colset */ - case 22: /* colsetlist */ + case 22: /* nearset */ + case 23: /* nearphrases */ { - sqlite3_free((fts5yypminor->fts5yy11)); + sqlite3Fts5ParseNearsetFree((fts5yypminor->fts5yy46)); } break; case 24: /* phrase */ @@ -182475,24 +192224,66 @@ static int sqlite3Fts5ParserStackPeak(void *p){ } #endif +/* This array of booleans keeps track of the parser statement +** coverage. The element fts5yycoverage[X][Y] is set when the parser +** is in state X and has a lookahead token Y. In a well-tested +** systems, every element of this matrix should end up being set. +*/ +#if defined(fts5YYCOVERAGE) +static unsigned char fts5yycoverage[fts5YYNSTATE][fts5YYNFTS5TOKEN]; +#endif + +/* +** Write into out a description of every state/lookahead combination that +** +** (1) has not been used by the parser, and +** (2) is not a syntax error. +** +** Return the number of missed state/lookahead combinations. +*/ +#if defined(fts5YYCOVERAGE) +static int sqlite3Fts5ParserCoverage(FILE *out){ + int stateno, iLookAhead, i; + int nMissed = 0; + for(stateno=0; stateno<fts5YYNSTATE; stateno++){ + i = fts5yy_shift_ofst[stateno]; + for(iLookAhead=0; iLookAhead<fts5YYNFTS5TOKEN; iLookAhead++){ + if( fts5yy_lookahead[i+iLookAhead]!=iLookAhead ) continue; + if( fts5yycoverage[stateno][iLookAhead]==0 ) nMissed++; + if( out ){ + fprintf(out,"State %d lookahead %s %s\n", stateno, + fts5yyTokenName[iLookAhead], + fts5yycoverage[stateno][iLookAhead] ? "ok" : "missed"); + } + } + } + return nMissed; +} +#endif + /* ** Find the appropriate action for a parser given the terminal ** look-ahead token iLookAhead. */ -static unsigned int fts5yy_find_shift_action( - fts5yyParser *pParser, /* The parser */ - fts5YYCODETYPE iLookAhead /* The look-ahead token */ +static fts5YYACTIONTYPE fts5yy_find_shift_action( + fts5YYCODETYPE iLookAhead, /* The look-ahead token */ + fts5YYACTIONTYPE stateno /* Current state number */ ){ int i; - int stateno = pParser->fts5yytos->stateno; - - if( stateno>=fts5YY_MIN_REDUCE ) return stateno; + + if( stateno>fts5YY_MAX_SHIFT ) return stateno; assert( stateno <= fts5YY_SHIFT_COUNT ); +#if defined(fts5YYCOVERAGE) + fts5yycoverage[stateno][iLookAhead] = 1; +#endif do{ i = fts5yy_shift_ofst[stateno]; + assert( i>=0 ); + assert( i+fts5YYNFTS5TOKEN<=(int)sizeof(fts5yy_lookahead)/sizeof(fts5yy_lookahead[0]) ); assert( iLookAhead!=fts5YYNOCODE ); + assert( iLookAhead < fts5YYNFTS5TOKEN ); i += iLookAhead; - if( i<0 || i>=fts5YY_ACTTAB_COUNT || fts5yy_lookahead[i]!=iLookAhead ){ + if( fts5yy_lookahead[i]!=iLookAhead ){ #ifdef fts5YYFALLBACK fts5YYCODETYPE iFallback; /* Fallback token */ if( iLookAhead<sizeof(fts5yyFallback)/sizeof(fts5yyFallback[0]) @@ -182543,7 +192334,7 @@ static unsigned int fts5yy_find_shift_action( ** look-ahead token iLookAhead. */ static int fts5yy_find_reduce_action( - int stateno, /* Current state number */ + fts5YYACTIONTYPE stateno, /* Current state number */ fts5YYCODETYPE iLookAhead /* The look-ahead token */ ){ int i; @@ -182555,7 +192346,6 @@ static int fts5yy_find_reduce_action( assert( stateno<=fts5YY_REDUCE_COUNT ); #endif i = fts5yy_reduce_ofst[stateno]; - assert( i!=fts5YY_REDUCE_USE_DFLT ); assert( iLookAhead!=fts5YYNOCODE ); i += iLookAhead; #ifdef fts5YYERRORSYMBOL @@ -182573,7 +192363,8 @@ static int fts5yy_find_reduce_action( ** The following routine is called if the stack overflows. */ static void fts5yyStackOverflow(fts5yyParser *fts5yypParser){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #ifndef NDEBUG if( fts5yyTraceFILE ){ fprintf(fts5yyTraceFILE,"%sStack Overflow!\n",fts5yyTracePrompt); @@ -182586,27 +192377,29 @@ static void fts5yyStackOverflow(fts5yyParser *fts5yypParser){ sqlite3Fts5ParseError(pParse, "fts5: parser stack overflow"); /******** End %stack_overflow code ********************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument var */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument var */ + sqlite3Fts5ParserCTX_STORE } /* ** Print tracing information for a SHIFT action */ #ifndef NDEBUG -static void fts5yyTraceShift(fts5yyParser *fts5yypParser, int fts5yyNewState){ +static void fts5yyTraceShift(fts5yyParser *fts5yypParser, int fts5yyNewState, const char *zTag){ if( fts5yyTraceFILE ){ if( fts5yyNewState<fts5YYNSTATE ){ - fprintf(fts5yyTraceFILE,"%sShift '%s', go to state %d\n", - fts5yyTracePrompt,fts5yyTokenName[fts5yypParser->fts5yytos->major], + fprintf(fts5yyTraceFILE,"%s%s '%s', go to state %d\n", + fts5yyTracePrompt, zTag, fts5yyTokenName[fts5yypParser->fts5yytos->major], fts5yyNewState); }else{ - fprintf(fts5yyTraceFILE,"%sShift '%s'\n", - fts5yyTracePrompt,fts5yyTokenName[fts5yypParser->fts5yytos->major]); + fprintf(fts5yyTraceFILE,"%s%s '%s', pending reduce %d\n", + fts5yyTracePrompt, zTag, fts5yyTokenName[fts5yypParser->fts5yytos->major], + fts5yyNewState - fts5YY_MIN_REDUCE); } } } #else -# define fts5yyTraceShift(X,Y) +# define fts5yyTraceShift(X,Y,Z) #endif /* @@ -182614,8 +192407,8 @@ static void fts5yyTraceShift(fts5yyParser *fts5yypParser, int fts5yyNewState){ */ static void fts5yy_shift( fts5yyParser *fts5yypParser, /* The parser to be shifted */ - int fts5yyNewState, /* The new state to shift in */ - int fts5yyMajor, /* The major token to shift in */ + fts5YYACTIONTYPE fts5yyNewState, /* The new state to shift in */ + fts5YYCODETYPE fts5yyMajor, /* The major token to shift in */ sqlite3Fts5ParserFTS5TOKENTYPE fts5yyMinor /* The minor token to shift in */ ){ fts5yyStackEntry *fts5yytos; @@ -182627,7 +192420,7 @@ static void fts5yy_shift( } #endif #if fts5YYSTACKDEPTH>0 - if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5YYSTACKDEPTH] ){ + if( fts5yypParser->fts5yytos>fts5yypParser->fts5yystackEnd ){ fts5yypParser->fts5yytos--; fts5yyStackOverflow(fts5yypParser); return; @@ -182645,45 +192438,47 @@ static void fts5yy_shift( fts5yyNewState += fts5YY_MIN_REDUCE - fts5YY_MIN_SHIFTREDUCE; } fts5yytos = fts5yypParser->fts5yytos; - fts5yytos->stateno = (fts5YYACTIONTYPE)fts5yyNewState; - fts5yytos->major = (fts5YYCODETYPE)fts5yyMajor; + fts5yytos->stateno = fts5yyNewState; + fts5yytos->major = fts5yyMajor; fts5yytos->minor.fts5yy0 = fts5yyMinor; - fts5yyTraceShift(fts5yypParser, fts5yyNewState); + fts5yyTraceShift(fts5yypParser, fts5yyNewState, "Shift"); } /* The following table contains information about every rule that ** is used during the reduce. */ static const struct { - fts5YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ - unsigned char nrhs; /* Number of right-hand side symbols in the rule */ + fts5YYCODETYPE lhs; /* Symbol on the left-hand side of the rule */ + signed char nrhs; /* Negative of the number of RHS symbols in the rule */ } fts5yyRuleInfo[] = { - { 16, 1 }, - { 17, 3 }, - { 17, 3 }, - { 17, 3 }, - { 17, 3 }, - { 17, 1 }, - { 19, 1 }, - { 19, 2 }, - { 18, 1 }, - { 18, 3 }, - { 21, 4 }, - { 21, 3 }, - { 21, 1 }, - { 21, 2 }, - { 22, 2 }, - { 22, 1 }, - { 20, 1 }, - { 20, 5 }, - { 23, 1 }, - { 23, 2 }, - { 25, 0 }, - { 25, 2 }, - { 24, 4 }, - { 24, 2 }, - { 26, 1 }, - { 26, 0 }, + { 16, -1 }, /* (0) input ::= expr */ + { 20, -4 }, /* (1) colset ::= MINUS LCP colsetlist RCP */ + { 20, -3 }, /* (2) colset ::= LCP colsetlist RCP */ + { 20, -1 }, /* (3) colset ::= STRING */ + { 20, -2 }, /* (4) colset ::= MINUS STRING */ + { 21, -2 }, /* (5) colsetlist ::= colsetlist STRING */ + { 21, -1 }, /* (6) colsetlist ::= STRING */ + { 17, -3 }, /* (7) expr ::= expr AND expr */ + { 17, -3 }, /* (8) expr ::= expr OR expr */ + { 17, -3 }, /* (9) expr ::= expr NOT expr */ + { 17, -5 }, /* (10) expr ::= colset COLON LP expr RP */ + { 17, -3 }, /* (11) expr ::= LP expr RP */ + { 17, -1 }, /* (12) expr ::= exprlist */ + { 19, -1 }, /* (13) exprlist ::= cnearset */ + { 19, -2 }, /* (14) exprlist ::= exprlist cnearset */ + { 18, -1 }, /* (15) cnearset ::= nearset */ + { 18, -3 }, /* (16) cnearset ::= colset COLON nearset */ + { 22, -1 }, /* (17) nearset ::= phrase */ + { 22, -2 }, /* (18) nearset ::= CARET phrase */ + { 22, -5 }, /* (19) nearset ::= STRING LP nearphrases neardist_opt RP */ + { 23, -1 }, /* (20) nearphrases ::= phrase */ + { 23, -2 }, /* (21) nearphrases ::= nearphrases phrase */ + { 25, 0 }, /* (22) neardist_opt ::= */ + { 25, -2 }, /* (23) neardist_opt ::= COMMA STRING */ + { 24, -4 }, /* (24) phrase ::= phrase PLUS STRING star_opt */ + { 24, -2 }, /* (25) phrase ::= STRING star_opt */ + { 26, -1 }, /* (26) star_opt ::= STAR */ + { 26, 0 }, /* (27) star_opt ::= */ }; static void fts5yy_accept(fts5yyParser*); /* Forward Declaration */ @@ -182691,22 +192486,39 @@ static void fts5yy_accept(fts5yyParser*); /* Forward Declaration */ /* ** Perform a reduce action and the shift that must immediately ** follow the reduce. +** +** The fts5yyLookahead and fts5yyLookaheadToken parameters provide reduce actions +** access to the lookahead token (if any). The fts5yyLookahead will be fts5YYNOCODE +** if the lookahead token has already been consumed. As this procedure is +** only called from one place, optimizing compilers will in-line it, which +** means that the extra parameters have no performance impact. */ -static void fts5yy_reduce( +static fts5YYACTIONTYPE fts5yy_reduce( fts5yyParser *fts5yypParser, /* The parser */ - unsigned int fts5yyruleno /* Number of the rule by which to reduce */ + unsigned int fts5yyruleno, /* Number of the rule by which to reduce */ + int fts5yyLookahead, /* Lookahead token, or fts5YYNOCODE if none */ + sqlite3Fts5ParserFTS5TOKENTYPE fts5yyLookaheadToken /* Value of the lookahead token */ + sqlite3Fts5ParserCTX_PDECL /* %extra_context */ ){ int fts5yygoto; /* The next state */ int fts5yyact; /* The next action */ fts5yyStackEntry *fts5yymsp; /* The top of the parser's stack */ int fts5yysize; /* Amount to pop the stack */ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + (void)fts5yyLookahead; + (void)fts5yyLookaheadToken; fts5yymsp = fts5yypParser->fts5yytos; #ifndef NDEBUG if( fts5yyTraceFILE && fts5yyruleno<(int)(sizeof(fts5yyRuleName)/sizeof(fts5yyRuleName[0])) ){ fts5yysize = fts5yyRuleInfo[fts5yyruleno].nrhs; - fprintf(fts5yyTraceFILE, "%sReduce [%s], go to state %d.\n", fts5yyTracePrompt, - fts5yyRuleName[fts5yyruleno], fts5yymsp[-fts5yysize].stateno); + if( fts5yysize ){ + fprintf(fts5yyTraceFILE, "%sReduce %d [%s], go to state %d.\n", + fts5yyTracePrompt, + fts5yyruleno, fts5yyRuleName[fts5yyruleno], fts5yymsp[fts5yysize].stateno); + }else{ + fprintf(fts5yyTraceFILE, "%sReduce %d [%s].\n", + fts5yyTracePrompt, fts5yyruleno, fts5yyRuleName[fts5yyruleno]); + } } #endif /* NDEBUG */ @@ -182721,15 +192533,21 @@ static void fts5yy_reduce( } #endif #if fts5YYSTACKDEPTH>0 - if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5YYSTACKDEPTH-1] ){ + if( fts5yypParser->fts5yytos>=fts5yypParser->fts5yystackEnd ){ fts5yyStackOverflow(fts5yypParser); - return; + /* The call to fts5yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } #else if( fts5yypParser->fts5yytos>=&fts5yypParser->fts5yystack[fts5yypParser->fts5yystksz-1] ){ if( fts5yyGrowStack(fts5yypParser) ){ fts5yyStackOverflow(fts5yypParser); - return; + /* The call to fts5yyStackOverflow() above pops the stack until it is + ** empty, causing the main parser loop to exit. So the return value + ** is never used and does not matter. */ + return 0; } fts5yymsp = fts5yypParser->fts5yytos; } @@ -182750,87 +192568,100 @@ static void fts5yy_reduce( case 0: /* input ::= expr */ { sqlite3Fts5ParseFinished(pParse, fts5yymsp[0].minor.fts5yy24); } break; - case 1: /* expr ::= expr AND expr */ + case 1: /* colset ::= MINUS LCP colsetlist RCP */ +{ + fts5yymsp[-3].minor.fts5yy11 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy11); +} + break; + case 2: /* colset ::= LCP colsetlist RCP */ +{ fts5yymsp[-2].minor.fts5yy11 = fts5yymsp[-1].minor.fts5yy11; } + break; + case 3: /* colset ::= STRING */ +{ + fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); +} + fts5yymsp[0].minor.fts5yy11 = fts5yylhsminor.fts5yy11; + break; + case 4: /* colset ::= MINUS STRING */ +{ + fts5yymsp[-1].minor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); + fts5yymsp[-1].minor.fts5yy11 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy11); +} + break; + case 5: /* colsetlist ::= colsetlist STRING */ +{ + fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, fts5yymsp[-1].minor.fts5yy11, &fts5yymsp[0].minor.fts5yy0); } + fts5yymsp[-1].minor.fts5yy11 = fts5yylhsminor.fts5yy11; + break; + case 6: /* colsetlist ::= STRING */ +{ + fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); +} + fts5yymsp[0].minor.fts5yy11 = fts5yylhsminor.fts5yy11; + break; + case 7: /* expr ::= expr AND expr */ { fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_AND, fts5yymsp[-2].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24, 0); } fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24; break; - case 2: /* expr ::= expr OR expr */ + case 8: /* expr ::= expr OR expr */ { fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_OR, fts5yymsp[-2].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24, 0); } fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24; break; - case 3: /* expr ::= expr NOT expr */ + case 9: /* expr ::= expr NOT expr */ { fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_NOT, fts5yymsp[-2].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24, 0); } fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24; break; - case 4: /* expr ::= LP expr RP */ + case 10: /* expr ::= colset COLON LP expr RP */ +{ + sqlite3Fts5ParseSetColset(pParse, fts5yymsp[-1].minor.fts5yy24, fts5yymsp[-4].minor.fts5yy11); + fts5yylhsminor.fts5yy24 = fts5yymsp[-1].minor.fts5yy24; +} + fts5yymsp[-4].minor.fts5yy24 = fts5yylhsminor.fts5yy24; + break; + case 11: /* expr ::= LP expr RP */ {fts5yymsp[-2].minor.fts5yy24 = fts5yymsp[-1].minor.fts5yy24;} break; - case 5: /* expr ::= exprlist */ - case 6: /* exprlist ::= cnearset */ fts5yytestcase(fts5yyruleno==6); + case 12: /* expr ::= exprlist */ + case 13: /* exprlist ::= cnearset */ fts5yytestcase(fts5yyruleno==13); {fts5yylhsminor.fts5yy24 = fts5yymsp[0].minor.fts5yy24;} fts5yymsp[0].minor.fts5yy24 = fts5yylhsminor.fts5yy24; break; - case 7: /* exprlist ::= exprlist cnearset */ + case 14: /* exprlist ::= exprlist cnearset */ { fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseImplicitAnd(pParse, fts5yymsp[-1].minor.fts5yy24, fts5yymsp[0].minor.fts5yy24); } fts5yymsp[-1].minor.fts5yy24 = fts5yylhsminor.fts5yy24; break; - case 8: /* cnearset ::= nearset */ + case 15: /* cnearset ::= nearset */ { fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy46); } fts5yymsp[0].minor.fts5yy24 = fts5yylhsminor.fts5yy24; break; - case 9: /* cnearset ::= colset COLON nearset */ + case 16: /* cnearset ::= colset COLON nearset */ { - sqlite3Fts5ParseSetColset(pParse, fts5yymsp[0].minor.fts5yy46, fts5yymsp[-2].minor.fts5yy11); fts5yylhsminor.fts5yy24 = sqlite3Fts5ParseNode(pParse, FTS5_STRING, 0, 0, fts5yymsp[0].minor.fts5yy46); + sqlite3Fts5ParseSetColset(pParse, fts5yylhsminor.fts5yy24, fts5yymsp[-2].minor.fts5yy11); } fts5yymsp[-2].minor.fts5yy24 = fts5yylhsminor.fts5yy24; break; - case 10: /* colset ::= MINUS LCP colsetlist RCP */ -{ - fts5yymsp[-3].minor.fts5yy11 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy11); -} - break; - case 11: /* colset ::= LCP colsetlist RCP */ -{ fts5yymsp[-2].minor.fts5yy11 = fts5yymsp[-1].minor.fts5yy11; } - break; - case 12: /* colset ::= STRING */ -{ - fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); -} - fts5yymsp[0].minor.fts5yy11 = fts5yylhsminor.fts5yy11; - break; - case 13: /* colset ::= MINUS STRING */ -{ - fts5yymsp[-1].minor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); - fts5yymsp[-1].minor.fts5yy11 = sqlite3Fts5ParseColsetInvert(pParse, fts5yymsp[-1].minor.fts5yy11); -} - break; - case 14: /* colsetlist ::= colsetlist STRING */ -{ - fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, fts5yymsp[-1].minor.fts5yy11, &fts5yymsp[0].minor.fts5yy0); } - fts5yymsp[-1].minor.fts5yy11 = fts5yylhsminor.fts5yy11; + case 17: /* nearset ::= phrase */ +{ fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); } + fts5yymsp[0].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 15: /* colsetlist ::= STRING */ + case 18: /* nearset ::= CARET phrase */ { - fts5yylhsminor.fts5yy11 = sqlite3Fts5ParseColset(pParse, 0, &fts5yymsp[0].minor.fts5yy0); + sqlite3Fts5ParseSetCaret(fts5yymsp[0].minor.fts5yy53); + fts5yymsp[-1].minor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); } - fts5yymsp[0].minor.fts5yy11 = fts5yylhsminor.fts5yy11; - break; - case 16: /* nearset ::= phrase */ -{ fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); } - fts5yymsp[0].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 17: /* nearset ::= STRING LP nearphrases neardist_opt RP */ + case 19: /* nearset ::= STRING LP nearphrases neardist_opt RP */ { sqlite3Fts5ParseNear(pParse, &fts5yymsp[-4].minor.fts5yy0); sqlite3Fts5ParseSetDistance(pParse, fts5yymsp[-2].minor.fts5yy46, &fts5yymsp[-1].minor.fts5yy0); @@ -182838,40 +192669,40 @@ static void fts5yy_reduce( } fts5yymsp[-4].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 18: /* nearphrases ::= phrase */ + case 20: /* nearphrases ::= phrase */ { fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, 0, fts5yymsp[0].minor.fts5yy53); } fts5yymsp[0].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 19: /* nearphrases ::= nearphrases phrase */ + case 21: /* nearphrases ::= nearphrases phrase */ { fts5yylhsminor.fts5yy46 = sqlite3Fts5ParseNearset(pParse, fts5yymsp[-1].minor.fts5yy46, fts5yymsp[0].minor.fts5yy53); } fts5yymsp[-1].minor.fts5yy46 = fts5yylhsminor.fts5yy46; break; - case 20: /* neardist_opt ::= */ + case 22: /* neardist_opt ::= */ { fts5yymsp[1].minor.fts5yy0.p = 0; fts5yymsp[1].minor.fts5yy0.n = 0; } break; - case 21: /* neardist_opt ::= COMMA STRING */ + case 23: /* neardist_opt ::= COMMA STRING */ { fts5yymsp[-1].minor.fts5yy0 = fts5yymsp[0].minor.fts5yy0; } break; - case 22: /* phrase ::= phrase PLUS STRING star_opt */ + case 24: /* phrase ::= phrase PLUS STRING star_opt */ { fts5yylhsminor.fts5yy53 = sqlite3Fts5ParseTerm(pParse, fts5yymsp[-3].minor.fts5yy53, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4); } fts5yymsp[-3].minor.fts5yy53 = fts5yylhsminor.fts5yy53; break; - case 23: /* phrase ::= STRING star_opt */ + case 25: /* phrase ::= STRING star_opt */ { fts5yylhsminor.fts5yy53 = sqlite3Fts5ParseTerm(pParse, 0, &fts5yymsp[-1].minor.fts5yy0, fts5yymsp[0].minor.fts5yy4); } fts5yymsp[-1].minor.fts5yy53 = fts5yylhsminor.fts5yy53; break; - case 24: /* star_opt ::= STAR */ + case 26: /* star_opt ::= STAR */ { fts5yymsp[0].minor.fts5yy4 = 1; } break; - case 25: /* star_opt ::= */ + case 27: /* star_opt ::= */ { fts5yymsp[1].minor.fts5yy4 = 0; } break; default: @@ -182881,21 +192712,21 @@ static void fts5yy_reduce( assert( fts5yyruleno<sizeof(fts5yyRuleInfo)/sizeof(fts5yyRuleInfo[0]) ); fts5yygoto = fts5yyRuleInfo[fts5yyruleno].lhs; fts5yysize = fts5yyRuleInfo[fts5yyruleno].nrhs; - fts5yyact = fts5yy_find_reduce_action(fts5yymsp[-fts5yysize].stateno,(fts5YYCODETYPE)fts5yygoto); - if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){ - if( fts5yyact>fts5YY_MAX_SHIFT ){ - fts5yyact += fts5YY_MIN_REDUCE - fts5YY_MIN_SHIFTREDUCE; - } - fts5yymsp -= fts5yysize-1; - fts5yypParser->fts5yytos = fts5yymsp; - fts5yymsp->stateno = (fts5YYACTIONTYPE)fts5yyact; - fts5yymsp->major = (fts5YYCODETYPE)fts5yygoto; - fts5yyTraceShift(fts5yypParser, fts5yyact); - }else{ - assert( fts5yyact == fts5YY_ACCEPT_ACTION ); - fts5yypParser->fts5yytos -= fts5yysize; - fts5yy_accept(fts5yypParser); - } + fts5yyact = fts5yy_find_reduce_action(fts5yymsp[fts5yysize].stateno,(fts5YYCODETYPE)fts5yygoto); + + /* There are no SHIFTREDUCE actions on nonterminals because the table + ** generator has simplified them to pure REDUCE actions. */ + assert( !(fts5yyact>fts5YY_MAX_SHIFT && fts5yyact<=fts5YY_MAX_SHIFTREDUCE) ); + + /* It is not possible for a REDUCE to be followed by an error */ + assert( fts5yyact!=fts5YY_ERROR_ACTION ); + + fts5yymsp += fts5yysize+1; + fts5yypParser->fts5yytos = fts5yymsp; + fts5yymsp->stateno = (fts5YYACTIONTYPE)fts5yyact; + fts5yymsp->major = (fts5YYCODETYPE)fts5yygoto; + fts5yyTraceShift(fts5yypParser, fts5yyact, "... then shift"); + return fts5yyact; } /* @@ -182905,7 +192736,8 @@ static void fts5yy_reduce( static void fts5yy_parse_failed( fts5yyParser *fts5yypParser /* The parser */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #ifndef NDEBUG if( fts5yyTraceFILE ){ fprintf(fts5yyTraceFILE,"%sFail!\n",fts5yyTracePrompt); @@ -182916,7 +192748,8 @@ static void fts5yy_parse_failed( ** parser fails */ /************ Begin %parse_failure code ***************************************/ /************ End %parse_failure code *****************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserCTX_STORE } #endif /* fts5YYNOERRORRECOVERY */ @@ -182928,7 +192761,8 @@ static void fts5yy_syntax_error( int fts5yymajor, /* The major type of the error token */ sqlite3Fts5ParserFTS5TOKENTYPE fts5yyminor /* The minor type of the error token */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #define FTS5TOKEN fts5yyminor /************ Begin %syntax_error code ****************************************/ @@ -182937,7 +192771,8 @@ static void fts5yy_syntax_error( pParse, "fts5: syntax error near \"%.*s\"",FTS5TOKEN.n,FTS5TOKEN.p ); /************ End %syntax_error code ******************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserCTX_STORE } /* @@ -182946,7 +192781,8 @@ static void fts5yy_syntax_error( static void fts5yy_accept( fts5yyParser *fts5yypParser /* The parser */ ){ - sqlite3Fts5ParserARG_FETCH; + sqlite3Fts5ParserARG_FETCH + sqlite3Fts5ParserCTX_FETCH #ifndef NDEBUG if( fts5yyTraceFILE ){ fprintf(fts5yyTraceFILE,"%sAccept!\n",fts5yyTracePrompt); @@ -182960,7 +192796,8 @@ static void fts5yy_accept( ** parser accepts */ /*********** Begin %parse_accept code *****************************************/ /*********** End %parse_accept code *******************************************/ - sqlite3Fts5ParserARG_STORE; /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserARG_STORE /* Suppress warning about unused %extra_argument variable */ + sqlite3Fts5ParserCTX_STORE } /* The main parser program. @@ -182989,38 +192826,51 @@ static void sqlite3Fts5Parser( sqlite3Fts5ParserARG_PDECL /* Optional %extra_argument parameter */ ){ fts5YYMINORTYPE fts5yyminorunion; - unsigned int fts5yyact; /* The parser action. */ + fts5YYACTIONTYPE fts5yyact; /* The parser action. */ #if !defined(fts5YYERRORSYMBOL) && !defined(fts5YYNOERRORRECOVERY) int fts5yyendofinput; /* True if we are at the end of input */ #endif #ifdef fts5YYERRORSYMBOL int fts5yyerrorhit = 0; /* True if fts5yymajor has invoked an error */ #endif - fts5yyParser *fts5yypParser; /* The parser */ + fts5yyParser *fts5yypParser = (fts5yyParser*)fts5yyp; /* The parser */ + sqlite3Fts5ParserCTX_FETCH + sqlite3Fts5ParserARG_STORE - fts5yypParser = (fts5yyParser*)fts5yyp; assert( fts5yypParser->fts5yytos!=0 ); #if !defined(fts5YYERRORSYMBOL) && !defined(fts5YYNOERRORRECOVERY) fts5yyendofinput = (fts5yymajor==0); #endif - sqlite3Fts5ParserARG_STORE; + fts5yyact = fts5yypParser->fts5yytos->stateno; #ifndef NDEBUG if( fts5yyTraceFILE ){ - fprintf(fts5yyTraceFILE,"%sInput '%s'\n",fts5yyTracePrompt,fts5yyTokenName[fts5yymajor]); + if( fts5yyact < fts5YY_MIN_REDUCE ){ + fprintf(fts5yyTraceFILE,"%sInput '%s' in state %d\n", + fts5yyTracePrompt,fts5yyTokenName[fts5yymajor],fts5yyact); + }else{ + fprintf(fts5yyTraceFILE,"%sInput '%s' with pending reduce %d\n", + fts5yyTracePrompt,fts5yyTokenName[fts5yymajor],fts5yyact-fts5YY_MIN_REDUCE); + } } #endif do{ - fts5yyact = fts5yy_find_shift_action(fts5yypParser,(fts5YYCODETYPE)fts5yymajor); - if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){ + assert( fts5yyact==fts5yypParser->fts5yytos->stateno ); + fts5yyact = fts5yy_find_shift_action(fts5yymajor,fts5yyact); + if( fts5yyact >= fts5YY_MIN_REDUCE ){ + fts5yyact = fts5yy_reduce(fts5yypParser,fts5yyact-fts5YY_MIN_REDUCE,fts5yymajor, + fts5yyminor sqlite3Fts5ParserCTX_PARAM); + }else if( fts5yyact <= fts5YY_MAX_SHIFTREDUCE ){ fts5yy_shift(fts5yypParser,fts5yyact,fts5yymajor,fts5yyminor); #ifndef fts5YYNOERRORRECOVERY fts5yypParser->fts5yyerrcnt--; #endif - fts5yymajor = fts5YYNOCODE; - }else if( fts5yyact <= fts5YY_MAX_REDUCE ){ - fts5yy_reduce(fts5yypParser,fts5yyact-fts5YY_MIN_REDUCE); + break; + }else if( fts5yyact==fts5YY_ACCEPT_ACTION ){ + fts5yypParser->fts5yytos--; + fts5yy_accept(fts5yypParser); + return; }else{ assert( fts5yyact == fts5YY_ERROR_ACTION ); fts5yyminorunion.fts5yy0 = fts5yyminor; @@ -183087,6 +192937,8 @@ static void sqlite3Fts5Parser( } fts5yypParser->fts5yyerrcnt = 3; fts5yyerrorhit = 1; + if( fts5yymajor==fts5YYNOCODE ) break; + fts5yyact = fts5yypParser->fts5yytos->stateno; #elif defined(fts5YYNOERRORRECOVERY) /* If the fts5YYNOERRORRECOVERY macro is defined, then do not attempt to ** do any kind of error recovery. Instead, simply invoke the syntax @@ -183097,8 +192949,7 @@ static void sqlite3Fts5Parser( */ fts5yy_syntax_error(fts5yypParser,fts5yymajor, fts5yyminor); fts5yy_destructor(fts5yypParser,(fts5YYCODETYPE)fts5yymajor,&fts5yyminorunion); - fts5yymajor = fts5YYNOCODE; - + break; #else /* fts5YYERRORSYMBOL is not defined */ /* This is what we do if the grammar does not define ERROR: ** @@ -183120,10 +192971,10 @@ static void sqlite3Fts5Parser( fts5yypParser->fts5yyerrcnt = -1; #endif } - fts5yymajor = fts5YYNOCODE; + break; #endif } - }while( fts5yymajor!=fts5YYNOCODE && fts5yypParser->fts5yytos>fts5yypParser->fts5yystack ); + }while( fts5yypParser->fts5yytos>fts5yypParser->fts5yystack ); #ifndef NDEBUG if( fts5yyTraceFILE ){ fts5yyStackEntry *i; @@ -183500,6 +193351,16 @@ static int fts5SnippetScore( } /* +** Return the value in pVal interpreted as utf-8 text. Except, if pVal +** contains a NULL value, return a pointer to a static string zero +** bytes in length instead of a NULL pointer. +*/ +static const char *fts5ValueToText(sqlite3_value *pVal){ + const char *zRet = (const char*)sqlite3_value_text(pVal); + return zRet ? zRet : ""; +} + +/* ** Implementation of snippet() function. */ static void fts5SnippetFunction( @@ -183534,9 +193395,9 @@ static void fts5SnippetFunction( nCol = pApi->xColumnCount(pFts); memset(&ctx, 0, sizeof(HighlightContext)); iCol = sqlite3_value_int(apVal[0]); - ctx.zOpen = (const char*)sqlite3_value_text(apVal[1]); - ctx.zClose = (const char*)sqlite3_value_text(apVal[2]); - zEllips = (const char*)sqlite3_value_text(apVal[3]); + ctx.zOpen = fts5ValueToText(apVal[1]); + ctx.zClose = fts5ValueToText(apVal[2]); + zEllips = fts5ValueToText(apVal[3]); nToken = sqlite3_value_int(apVal[4]); iBestCol = (iCol>=0 ? iCol : 0); @@ -183913,9 +193774,11 @@ static void sqlite3Fts5BufferAppendBlob( const u8 *pData ){ assert_nc( *pRc || nData>=0 ); - if( fts5BufferGrow(pRc, pBuf, nData) ) return; - memcpy(&pBuf->p[pBuf->n], pData, nData); - pBuf->n += nData; + if( nData ){ + if( fts5BufferGrow(pRc, pBuf, nData) ) return; + memcpy(&pBuf->p[pBuf->n], pData, nData); + pBuf->n += nData; + } } /* @@ -184092,8 +193955,8 @@ static void *sqlite3Fts5MallocZero(int *pRc, int nByte){ void *pRet = 0; if( *pRc==SQLITE_OK ){ pRet = sqlite3_malloc(nByte); - if( pRet==0 && nByte>0 ){ - *pRc = SQLITE_NOMEM; + if( pRet==0 ){ + if( nByte>0 ) *pRc = SQLITE_NOMEM; }else{ memset(pRet, 0, nByte); } @@ -185288,7 +195151,8 @@ struct Fts5ExprNode { ** or term prefix. */ struct Fts5ExprTerm { - int bPrefix; /* True for a prefix term */ + u8 bPrefix; /* True for a prefix term */ + u8 bFirst; /* True if token must be first in column */ char *zTerm; /* nul-terminated term */ Fts5IndexIter *pIter; /* Iterator for this term */ Fts5ExprTerm *pSynonym; /* Pointer to first in list of synonyms */ @@ -185369,6 +195233,7 @@ static int fts5ExprGetToken( case '+': tok = FTS5_PLUS; break; case '*': tok = FTS5_STAR; break; case '-': tok = FTS5_MINUS; break; + case '^': tok = FTS5_CARET; break; case '\0': tok = FTS5_EOF; break; case '"': { @@ -185414,6 +195279,7 @@ static void fts5ParseFree(void *p){ sqlite3_free(p); } static int sqlite3Fts5ExprNew( Fts5Config *pConfig, /* FTS5 Configuration */ + int iCol, const char *zExpr, /* Expression text */ Fts5Expr **ppNew, char **pzErr @@ -185438,6 +195304,18 @@ static int sqlite3Fts5ExprNew( }while( sParse.rc==SQLITE_OK && t!=FTS5_EOF ); sqlite3Fts5ParserFree(pEngine, fts5ParseFree); + /* If the LHS of the MATCH expression was a user column, apply the + ** implicit column-filter. */ + if( iCol<pConfig->nCol && sParse.pExpr && sParse.rc==SQLITE_OK ){ + int n = sizeof(Fts5Colset); + Fts5Colset *pColset = (Fts5Colset*)sqlite3Fts5MallocZero(&sParse.rc, n); + if( pColset ){ + pColset->nCol = 1; + pColset->aiCol[0] = iCol; + sqlite3Fts5ParseSetColset(&sParse, sParse.pExpr, pColset); + } + } + assert( sParse.rc!=SQLITE_OK || sParse.zErr==0 ); if( sParse.rc==SQLITE_OK ){ *ppNew = pNew = sqlite3_malloc(sizeof(Fts5Expr)); @@ -185615,6 +195493,7 @@ static int fts5ExprPhraseIsMatch( Fts5PoslistReader *aIter = aStatic; int i; int rc = SQLITE_OK; + int bFirst = pPhrase->aTerm[0].bFirst; fts5BufferZero(&pPhrase->poslist); @@ -185669,8 +195548,10 @@ static int fts5ExprPhraseIsMatch( }while( bMatch==0 ); /* Append position iPos to the output */ - rc = sqlite3Fts5PoslistWriterAppend(&pPhrase->poslist, &writer, iPos); - if( rc!=SQLITE_OK ) goto ismatch_out; + if( bFirst==0 || FTS5_POS2OFFSET(iPos)==0 ){ + rc = sqlite3Fts5PoslistWriterAppend(&pPhrase->poslist, &writer, iPos); + if( rc!=SQLITE_OK ) goto ismatch_out; + } for(i=0; i<pPhrase->nTerm; i++){ if( sqlite3Fts5PoslistReaderNext(&aIter[i]) ) goto ismatch_out; @@ -185924,7 +195805,9 @@ static int fts5ExprNearTest( ** phrase is not a match, break out of the loop early. */ for(i=0; rc==SQLITE_OK && i<pNear->nPhrase; i++){ Fts5ExprPhrase *pPhrase = pNear->apPhrase[i]; - if( pPhrase->nTerm>1 || pPhrase->aTerm[0].pSynonym || pNear->pColset ){ + if( pPhrase->nTerm>1 || pPhrase->aTerm[0].pSynonym + || pNear->pColset || pPhrase->aTerm[0].bFirst + ){ int bMatch = 0; rc = fts5ExprPhraseIsMatch(pNode, pPhrase, &bMatch); if( bMatch==0 ) break; @@ -186105,6 +195988,7 @@ static int fts5ExprNodeTest_STRING( assert( pNear->nPhrase>1 || pNear->apPhrase[0]->nTerm>1 || pNear->apPhrase[0]->aTerm[0].pSynonym + || pNear->apPhrase[0]->aTerm[0].bFirst ); /* Initialize iLast, the "lastest" rowid any iterator points to. If the @@ -186311,7 +196195,10 @@ static int fts5ExprNodeNext_OR( || (bFromValid && fts5RowidCmp(pExpr, p1->iRowid, iFrom)<0) ){ int rc = fts5ExprNodeNext(pExpr, p1, bFromValid, iFrom); - if( rc!=SQLITE_OK ) return rc; + if( rc!=SQLITE_OK ){ + pNode->bNomatch = 0; + return rc; + } } } } @@ -186342,7 +196229,10 @@ static int fts5ExprNodeTest_AND( if( cmp>0 ){ /* Advance pChild until it points to iLast or laster */ rc = fts5ExprNodeNext(pExpr, pChild, 1, iLast); - if( rc!=SQLITE_OK ) return rc; + if( rc!=SQLITE_OK ){ + pAnd->bNomatch = 0; + return rc; + } } /* If the child node is now at EOF, so is the parent AND node. Otherwise, @@ -186381,6 +196271,8 @@ static int fts5ExprNodeNext_AND( int rc = fts5ExprNodeNext(pExpr, pNode->apChild[0], bFromValid, iFrom); if( rc==SQLITE_OK ){ rc = fts5ExprNodeTest_AND(pExpr, pNode); + }else{ + pNode->bNomatch = 0; } return rc; } @@ -186423,6 +196315,9 @@ static int fts5ExprNodeNext_NOT( if( rc==SQLITE_OK ){ rc = fts5ExprNodeTest_NOT(pExpr, pNode); } + if( rc!=SQLITE_OK ){ + pNode->bNomatch = 0; + } return rc; } @@ -186619,6 +196514,16 @@ static void fts5ExprPhraseFree(Fts5ExprPhrase *pPhrase){ } /* +** Set the "bFirst" flag on the first token of the phrase passed as the +** only argument. +*/ +static void sqlite3Fts5ParseSetCaret(Fts5ExprPhrase *pPhrase){ + if( pPhrase && pPhrase->nTerm ){ + pPhrase->aTerm[0].bFirst = 1; + } +} + +/* ** If argument pNear is NULL, then a new Fts5ExprNearset object is allocated ** and populated with pPhrase. Or, if pNear is not NULL, phrase pPhrase is ** appended to it and the results returned. @@ -186835,7 +196740,7 @@ static Fts5ExprPhrase *sqlite3Fts5ParseTerm( ** no token characters at all. (e.g ... MATCH '""'). */ sCtx.pPhrase = sqlite3Fts5MallocZero(&pParse->rc, sizeof(Fts5ExprPhrase)); }else if( sCtx.pPhrase->nTerm ){ - sCtx.pPhrase->aTerm[sCtx.pPhrase->nTerm-1].bPrefix = bPrefix; + sCtx.pPhrase->aTerm[sCtx.pPhrase->nTerm-1].bPrefix = (u8)bPrefix; } pParse->apPhrase[pParse->nPhrase-1] = sCtx.pPhrase; } @@ -186896,6 +196801,7 @@ static int sqlite3Fts5ExprClonePhrase( } if( rc==SQLITE_OK ){ sCtx.pPhrase->aTerm[i].bPrefix = pOrig->aTerm[i].bPrefix; + sCtx.pPhrase->aTerm[i].bFirst = pOrig->aTerm[i].bFirst; } } }else{ @@ -186914,7 +196820,10 @@ static int sqlite3Fts5ExprClonePhrase( pNew->pRoot->pNear->nPhrase = 1; sCtx.pPhrase->pNode = pNew->pRoot; - if( pOrig->nTerm==1 && pOrig->aTerm[0].pSynonym==0 ){ + if( pOrig->nTerm==1 + && pOrig->aTerm[0].pSynonym==0 + && pOrig->aTerm[0].bFirst==0 + ){ pNew->pRoot->eType = FTS5_TERM; pNew->pRoot->xNext = fts5ExprNodeNext_TERM; }else{ @@ -187076,25 +196985,110 @@ static Fts5Colset *sqlite3Fts5ParseColset( return pRet; } +/* +** If argument pOrig is NULL, or if (*pRc) is set to anything other than +** SQLITE_OK when this function is called, NULL is returned. +** +** Otherwise, a copy of (*pOrig) is made into memory obtained from +** sqlite3Fts5MallocZero() and a pointer to it returned. If the allocation +** fails, (*pRc) is set to SQLITE_NOMEM and NULL is returned. +*/ +static Fts5Colset *fts5CloneColset(int *pRc, Fts5Colset *pOrig){ + Fts5Colset *pRet; + if( pOrig ){ + int nByte = sizeof(Fts5Colset) + (pOrig->nCol-1) * sizeof(int); + pRet = (Fts5Colset*)sqlite3Fts5MallocZero(pRc, nByte); + if( pRet ){ + memcpy(pRet, pOrig, nByte); + } + }else{ + pRet = 0; + } + return pRet; +} + +/* +** Remove from colset pColset any columns that are not also in colset pMerge. +*/ +static void fts5MergeColset(Fts5Colset *pColset, Fts5Colset *pMerge){ + int iIn = 0; /* Next input in pColset */ + int iMerge = 0; /* Next input in pMerge */ + int iOut = 0; /* Next output slot in pColset */ + + while( iIn<pColset->nCol && iMerge<pMerge->nCol ){ + int iDiff = pColset->aiCol[iIn] - pMerge->aiCol[iMerge]; + if( iDiff==0 ){ + pColset->aiCol[iOut++] = pMerge->aiCol[iMerge]; + iMerge++; + iIn++; + }else if( iDiff>0 ){ + iMerge++; + }else{ + iIn++; + } + } + pColset->nCol = iOut; +} + +/* +** Recursively apply colset pColset to expression node pNode and all of +** its decendents. If (*ppFree) is not NULL, it contains a spare copy +** of pColset. This function may use the spare copy and set (*ppFree) to +** zero, or it may create copies of pColset using fts5CloneColset(). +*/ +static void fts5ParseSetColset( + Fts5Parse *pParse, + Fts5ExprNode *pNode, + Fts5Colset *pColset, + Fts5Colset **ppFree +){ + if( pParse->rc==SQLITE_OK ){ + assert( pNode->eType==FTS5_TERM || pNode->eType==FTS5_STRING + || pNode->eType==FTS5_AND || pNode->eType==FTS5_OR + || pNode->eType==FTS5_NOT || pNode->eType==FTS5_EOF + ); + if( pNode->eType==FTS5_STRING || pNode->eType==FTS5_TERM ){ + Fts5ExprNearset *pNear = pNode->pNear; + if( pNear->pColset ){ + fts5MergeColset(pNear->pColset, pColset); + if( pNear->pColset->nCol==0 ){ + pNode->eType = FTS5_EOF; + pNode->xNext = 0; + } + }else if( *ppFree ){ + pNear->pColset = pColset; + *ppFree = 0; + }else{ + pNear->pColset = fts5CloneColset(&pParse->rc, pColset); + } + }else{ + int i; + assert( pNode->eType!=FTS5_EOF || pNode->nChild==0 ); + for(i=0; i<pNode->nChild; i++){ + fts5ParseSetColset(pParse, pNode->apChild[i], pColset, ppFree); + } + } + } +} + +/* +** Apply colset pColset to expression node pExpr and all of its descendents. +*/ static void sqlite3Fts5ParseSetColset( Fts5Parse *pParse, - Fts5ExprNearset *pNear, + Fts5ExprNode *pExpr, Fts5Colset *pColset ){ + Fts5Colset *pFree = pColset; if( pParse->pConfig->eDetail==FTS5_DETAIL_NONE ){ pParse->rc = SQLITE_ERROR; pParse->zErr = sqlite3_mprintf( "fts5: column queries are not supported (detail=none)" ); - sqlite3_free(pColset); - return; - } - - if( pNear ){ - pNear->pColset = pColset; }else{ - sqlite3_free(pColset); + fts5ParseSetColset(pParse, pExpr, pColset, &pFree); } + sqlite3_free(pFree); } static void fts5ExprAssignXNext(Fts5ExprNode *pNode){ @@ -187103,6 +197097,7 @@ static void fts5ExprAssignXNext(Fts5ExprNode *pNode){ Fts5ExprNearset *pNear = pNode->pNear; if( pNear->nPhrase==1 && pNear->apPhrase[0]->nTerm==1 && pNear->apPhrase[0]->aTerm[0].pSynonym==0 + && pNear->apPhrase[0]->aTerm[0].bFirst==0 ){ pNode->eType = FTS5_TERM; pNode->xNext = fts5ExprNodeNext_TERM; @@ -187189,20 +197184,23 @@ static Fts5ExprNode *sqlite3Fts5ParseNode( } } - if( pParse->pConfig->eDetail!=FTS5_DETAIL_FULL - && (pNear->nPhrase!=1 || pNear->apPhrase[0]->nTerm>1) - ){ - assert( pParse->rc==SQLITE_OK ); - pParse->rc = SQLITE_ERROR; - assert( pParse->zErr==0 ); - pParse->zErr = sqlite3_mprintf( - "fts5: %s queries are not supported (detail!=full)", - pNear->nPhrase==1 ? "phrase": "NEAR" - ); - sqlite3_free(pRet); - pRet = 0; + if( pParse->pConfig->eDetail!=FTS5_DETAIL_FULL ){ + Fts5ExprPhrase *pPhrase = pNear->apPhrase[0]; + if( pNear->nPhrase!=1 + || pPhrase->nTerm>1 + || (pPhrase->nTerm>0 && pPhrase->aTerm[0].bFirst) + ){ + assert( pParse->rc==SQLITE_OK ); + pParse->rc = SQLITE_ERROR; + assert( pParse->zErr==0 ); + pParse->zErr = sqlite3_mprintf( + "fts5: %s queries are not supported (detail!=full)", + pNear->nPhrase==1 ? "phrase": "NEAR" + ); + sqlite3_free(pRet); + pRet = 0; + } } - }else{ fts5ExprAddChildren(pRet, pLeft); fts5ExprAddChildren(pRet, pRight); @@ -187548,7 +197546,7 @@ static void fts5ExprFunction( rc = sqlite3Fts5ConfigParse(pGlobal, db, nConfig, azConfig, &pConfig, &zErr); if( rc==SQLITE_OK ){ - rc = sqlite3Fts5ExprNew(pConfig, zExpr, &pExpr, &zErr); + rc = sqlite3Fts5ExprNew(pConfig, pConfig->nCol, zExpr, &pExpr, &zErr); } if( rc==SQLITE_OK ){ char *zText; @@ -187945,9 +197943,10 @@ struct Fts5Hash { /* ** Each entry in the hash table is represented by an object of the -** following type. Each object, its key (zKey[]) and its current data -** are stored in a single memory allocation. The position list data -** immediately follows the key data in memory. +** following type. Each object, its key (a nul-terminated string) and +** its current data are stored in a single memory allocation. The +** key immediately follows the object in memory. The position list +** data immediately follows the key data in memory. ** ** The data that follows the key is in a similar, but not identical format ** to the doclist data stored in the database. It is: @@ -187971,20 +197970,20 @@ struct Fts5HashEntry { int nAlloc; /* Total size of allocation */ int iSzPoslist; /* Offset of space for 4-byte poslist size */ int nData; /* Total bytes of data (incl. structure) */ - int nKey; /* Length of zKey[] in bytes */ + int nKey; /* Length of key in bytes */ u8 bDel; /* Set delete-flag @ iSzPoslist */ u8 bContent; /* Set content-flag (detail=none mode) */ i16 iCol; /* Column of last value written */ int iPos; /* Position of last value written */ i64 iRowid; /* Rowid of last value written */ - char zKey[8]; /* Nul-terminated entry key */ }; /* -** Size of Fts5HashEntry without the zKey[] array. +** Eqivalent to: +** +** char *fts5EntryKey(Fts5HashEntry *pEntry){ return zKey; } */ -#define FTS5_HASHENTRYSIZE (sizeof(Fts5HashEntry)-8) - +#define fts5EntryKey(p) ( ((char *)(&(p)[1])) ) /* @@ -188079,10 +198078,11 @@ static int fts5HashResize(Fts5Hash *pHash){ for(i=0; i<pHash->nSlot; i++){ while( apOld[i] ){ - int iHash; + unsigned int iHash; Fts5HashEntry *p = apOld[i]; apOld[i] = p->pHashNext; - iHash = fts5HashKey(nNew, (u8*)p->zKey, (int)strlen(p->zKey)); + iHash = fts5HashKey(nNew, (u8*)fts5EntryKey(p), + (int)strlen(fts5EntryKey(p))); p->pHashNext = apNew[iHash]; apNew[iHash] = p; } @@ -188153,9 +198153,10 @@ static int sqlite3Fts5HashWrite( /* Attempt to locate an existing hash entry */ iHash = fts5HashKey2(pHash->nSlot, (u8)bByte, (const u8*)pToken, nToken); for(p=pHash->aSlot[iHash]; p; p=p->pHashNext){ - if( p->zKey[0]==bByte + char *zKey = fts5EntryKey(p); + if( zKey[0]==bByte && p->nKey==nToken - && memcmp(&p->zKey[1], pToken, nToken)==0 + && memcmp(&zKey[1], pToken, nToken)==0 ){ break; } @@ -188164,7 +198165,8 @@ static int sqlite3Fts5HashWrite( /* If an existing hash entry cannot be found, create a new one. */ if( p==0 ){ /* Figure out how much space to allocate */ - int nByte = FTS5_HASHENTRYSIZE + (nToken+1) + 1 + 64; + char *zKey; + int nByte = sizeof(Fts5HashEntry) + (nToken+1) + 1 + 64; if( nByte<128 ) nByte = 128; /* Grow the Fts5Hash.aSlot[] array if necessary. */ @@ -188177,14 +198179,15 @@ static int sqlite3Fts5HashWrite( /* Allocate new Fts5HashEntry and add it to the hash table. */ p = (Fts5HashEntry*)sqlite3_malloc(nByte); if( !p ) return SQLITE_NOMEM; - memset(p, 0, FTS5_HASHENTRYSIZE); + memset(p, 0, sizeof(Fts5HashEntry)); p->nAlloc = nByte; - p->zKey[0] = bByte; - memcpy(&p->zKey[1], pToken, nToken); - assert( iHash==fts5HashKey(pHash->nSlot, (u8*)p->zKey, nToken+1) ); + zKey = fts5EntryKey(p); + zKey[0] = bByte; + memcpy(&zKey[1], pToken, nToken); + assert( iHash==fts5HashKey(pHash->nSlot, (u8*)zKey, nToken+1) ); p->nKey = nToken; - p->zKey[nToken+1] = '\0'; - p->nData = nToken+1 + 1 + FTS5_HASHENTRYSIZE; + zKey[nToken+1] = '\0'; + p->nData = nToken+1 + 1 + sizeof(Fts5HashEntry); p->pHashNext = pHash->aSlot[iHash]; pHash->aSlot[iHash] = p; pHash->nEntry++; @@ -188302,9 +198305,11 @@ static Fts5HashEntry *fts5HashEntryMerge( p1 = 0; }else{ int i = 0; - while( p1->zKey[i]==p2->zKey[i] ) i++; + char *zKey1 = fts5EntryKey(p1); + char *zKey2 = fts5EntryKey(p2); + while( zKey1[i]==zKey2[i] ) i++; - if( ((u8)p1->zKey[i])>((u8)p2->zKey[i]) ){ + if( ((u8)zKey1[i])>((u8)zKey2[i]) ){ /* p2 is smaller */ *ppOut = p2; ppOut = &p2->pScanNext; @@ -188347,7 +198352,7 @@ static int fts5HashEntrySort( for(iSlot=0; iSlot<pHash->nSlot; iSlot++){ Fts5HashEntry *pIter; for(pIter=pHash->aSlot[iSlot]; pIter; pIter=pIter->pHashNext){ - if( pTerm==0 || 0==memcmp(pIter->zKey, pTerm, nTerm) ){ + if( pTerm==0 || 0==memcmp(fts5EntryKey(pIter), pTerm, nTerm) ){ Fts5HashEntry *pEntry = pIter; pEntry->pScanNext = 0; for(i=0; ap[i]; i++){ @@ -188380,16 +198385,18 @@ static int sqlite3Fts5HashQuery( int *pnDoclist /* OUT: Size of doclist in bytes */ ){ unsigned int iHash = fts5HashKey(pHash->nSlot, (const u8*)pTerm, nTerm); + char *zKey = 0; Fts5HashEntry *p; for(p=pHash->aSlot[iHash]; p; p=p->pHashNext){ - if( memcmp(p->zKey, pTerm, nTerm)==0 && p->zKey[nTerm]==0 ) break; + zKey = fts5EntryKey(p); + if( memcmp(zKey, pTerm, nTerm)==0 && zKey[nTerm]==0 ) break; } if( p ){ fts5HashAddPoslistSize(pHash, p); - *ppDoclist = (const u8*)&p->zKey[nTerm+1]; - *pnDoclist = p->nData - (FTS5_HASHENTRYSIZE + nTerm + 1); + *ppDoclist = (const u8*)&zKey[nTerm+1]; + *pnDoclist = p->nData - (sizeof(Fts5HashEntry) + nTerm + 1); }else{ *ppDoclist = 0; *pnDoclist = 0; @@ -188422,11 +198429,12 @@ static void sqlite3Fts5HashScanEntry( ){ Fts5HashEntry *p; if( (p = pHash->pScan) ){ - int nTerm = (int)strlen(p->zKey); + char *zKey = fts5EntryKey(p); + int nTerm = (int)strlen(zKey); fts5HashAddPoslistSize(pHash, p); - *pzTerm = p->zKey; - *ppDoclist = (const u8*)&p->zKey[nTerm+1]; - *pnDoclist = p->nData - (FTS5_HASHENTRYSIZE + nTerm + 1); + *pzTerm = zKey; + *ppDoclist = (const u8*)&zKey[nTerm+1]; + *pnDoclist = p->nData - (sizeof(Fts5HashEntry) + nTerm + 1); }else{ *pzTerm = 0; *ppDoclist = 0; @@ -189065,7 +199073,6 @@ static void fts5CloseReader(Fts5Index *p){ } } - /* ** Retrieve a record from the %_data table. ** @@ -189166,7 +199173,8 @@ static int fts5IndexPrepareStmt( ){ if( p->rc==SQLITE_OK ){ if( zSql ){ - p->rc = sqlite3_prepare_v2(p->pConfig->db, zSql, -1, ppStmt, 0); + p->rc = sqlite3_prepare_v3(p->pConfig->db, zSql, -1, + SQLITE_PREPARE_PERSISTENT, ppStmt, 0); }else{ p->rc = SQLITE_NOMEM; } @@ -189195,6 +199203,7 @@ static void fts5DataWrite(Fts5Index *p, i64 iRowid, const u8 *pData, int nData){ sqlite3_bind_blob(p->pWriter, 2, pData, nData, SQLITE_STATIC); sqlite3_step(p->pWriter); p->rc = sqlite3_reset(p->pWriter); + sqlite3_bind_null(p->pWriter, 2); } /* @@ -189215,7 +199224,8 @@ static void fts5DataDelete(Fts5Index *p, i64 iFirst, i64 iLast){ if( zSql==0 ){ rc = SQLITE_NOMEM; }else{ - rc = sqlite3_prepare_v2(pConfig->db, zSql, -1, &p->pDeleter, 0); + rc = sqlite3_prepare_v3(pConfig->db, zSql, -1, + SQLITE_PREPARE_PERSISTENT, &p->pDeleter, 0); sqlite3_free(zSql); } if( rc!=SQLITE_OK ){ @@ -190822,6 +200832,7 @@ static void fts5SegIterSeekInit( bDlidx = (val & 0x0001); } p->rc = sqlite3_reset(pIdxSelect); + sqlite3_bind_null(pIdxSelect, 2); if( iPg<pSeg->pgnoFirst ){ iPg = pSeg->pgnoFirst; @@ -191316,7 +201327,8 @@ static void fts5MultiIterNext2( ){ assert( pIter->bSkipEmpty ); if( p->rc==SQLITE_OK ){ - do { + *pbNewTerm = 0; + do{ int iFirst = pIter->aFirst[1].iFirst; Fts5SegIter *pSeg = &pIter->aSeg[iFirst]; int bNewTerm = 0; @@ -191329,8 +201341,6 @@ static void fts5MultiIterNext2( fts5MultiIterAdvanced(p, pIter, iFirst, 1); fts5MultiIterSetEof(pIter); *pbNewTerm = 1; - }else{ - *pbNewTerm = 0; } fts5AssertMultiIterSetup(p, pIter); @@ -191596,23 +201606,23 @@ static int fts5IndexExtractCol( return p - (*pa); } -static int fts5IndexExtractColset ( +static void fts5IndexExtractColset( + int *pRc, Fts5Colset *pColset, /* Colset to filter on */ const u8 *pPos, int nPos, /* Position list */ Fts5Buffer *pBuf /* Output buffer */ ){ - int rc = SQLITE_OK; - int i; - - fts5BufferZero(pBuf); - for(i=0; i<pColset->nCol; i++){ - const u8 *pSub = pPos; - int nSub = fts5IndexExtractCol(&pSub, nPos, pColset->aiCol[i]); - if( nSub ){ - fts5BufferAppendBlob(&rc, pBuf, nSub, pSub); + if( *pRc==SQLITE_OK ){ + int i; + fts5BufferZero(pBuf); + for(i=0; i<pColset->nCol; i++){ + const u8 *pSub = pPos; + int nSub = fts5IndexExtractCol(&pSub, nPos, pColset->aiCol[i]); + if( nSub ){ + fts5BufferAppendBlob(pRc, pBuf, nSub, pSub); + } } } - return rc; } /* @@ -191736,8 +201746,9 @@ static void fts5IterSetOutputs_Full(Fts5Iter *pIter, Fts5SegIter *pSeg){ pIter->base.nData = fts5IndexExtractCol(&a, pSeg->nPos,pColset->aiCol[0]); pIter->base.pData = a; }else{ + int *pRc = &pIter->pIndex->rc; fts5BufferZero(&pIter->poslist); - fts5IndexExtractColset(pColset, a, pSeg->nPos, &pIter->poslist); + fts5IndexExtractColset(pRc, pColset, a, pSeg->nPos, &pIter->poslist); pIter->base.pData = pIter->poslist.p; pIter->base.nData = pIter->poslist.n; } @@ -192034,6 +202045,7 @@ static int fts5AllocateSegid(Fts5Index *p, Fts5Structure *pStruct){ sqlite3_bind_blob(pIdxSelect, 2, aBlob, 2, SQLITE_STATIC); assert( sqlite3_step(pIdxSelect)!=SQLITE_ROW ); p->rc = sqlite3_reset(pIdxSelect); + sqlite3_bind_null(pIdxSelect, 2); } } #endif @@ -192160,6 +202172,7 @@ static void fts5WriteFlushBtree(Fts5Index *p, Fts5SegWriter *pWriter){ sqlite3_bind_int64(p->pIdxWriter, 3, bFlag + ((i64)pWriter->iBtPage<<1)); sqlite3_step(p->pIdxWriter); p->rc = sqlite3_reset(p->pIdxWriter); + sqlite3_bind_null(p->pIdxWriter, 2); } pWriter->iBtPage = 0; } @@ -192282,9 +202295,6 @@ static void fts5WriteFlushLeaf(Fts5Index *p, Fts5SegWriter *pWriter){ Fts5PageWriter *pPage = &pWriter->writer; i64 iRowid; -static int nCall = 0; -nCall++; - assert( (pPage->pgidx.n==0)==(pWriter->bFirstTermInPage) ); /* Set the szLeaf header field. */ @@ -192633,6 +202643,7 @@ static void fts5IndexMergeLevel( int bOldest; /* True if the output segment is the oldest */ int eDetail = p->pConfig->eDetail; const int flags = FTS5INDEX_QUERY_NOOUTPUT; + int bTermWritten = 0; /* True if current term already output */ assert( iLvl<pStruct->nLevel ); assert( pLvl->nMerge<=pLvl->nSeg ); @@ -192686,18 +202697,22 @@ static void fts5IndexMergeLevel( int nTerm; const u8 *pTerm; - /* Check for key annihilation. */ - if( pSegIter->nPos==0 && (bOldest || pSegIter->bDel==0) ) continue; - pTerm = fts5MultiIterTerm(pIter, &nTerm); if( nTerm!=term.n || memcmp(pTerm, term.p, nTerm) ){ if( pnRem && writer.nLeafWritten>nRem ){ break; } + fts5BufferSet(&p->rc, &term, nTerm, pTerm); + bTermWritten =0; + } + + /* Check for key annihilation. */ + if( pSegIter->nPos==0 && (bOldest || pSegIter->bDel==0) ) continue; + if( p->rc==SQLITE_OK && bTermWritten==0 ){ /* This is a new term. Append a term to the output segment. */ fts5WriteAppendTerm(p, &writer, nTerm, pTerm); - fts5BufferSet(&p->rc, &term, nTerm, pTerm); + bTermWritten = 1; } /* Append the rowid to the output */ @@ -193343,7 +203358,13 @@ static void fts5MergePrefixLists( Fts5Buffer out = {0, 0, 0}; Fts5Buffer tmp = {0, 0, 0}; - if( sqlite3Fts5BufferSize(&p->rc, &out, p1->n + p2->n) ) return; + /* The maximum size of the output is equal to the sum of the two + ** input sizes + 1 varint (9 bytes). The extra varint is because if the + ** first rowid in one input is a large negative number, and the first in + ** the other a non-negative number, the delta for the non-negative + ** number will be larger on disk than the literal integer value + ** was. */ + if( sqlite3Fts5BufferSize(&p->rc, &out, p1->n + p2->n + 9) ) return; fts5DoclistIterInit(p1, &i1); fts5DoclistIterInit(p2, &i2); @@ -193437,6 +203458,7 @@ static void fts5MergePrefixLists( fts5MergeAppendDocid(&out, iLastRowid, i2.iRowid); fts5BufferSafeAppendBlob(&out, i2.aPoslist, i2.aEof - i2.aPoslist); } + assert( out.n<=(p1->n+p2->n+9) ); fts5BufferSet(&p->rc, p1, out.n, out.p); fts5BufferFree(&tmp); @@ -193529,7 +203551,7 @@ static void fts5SetupPrefixIter( if( pData ){ pData->p = (u8*)&pData[1]; pData->nn = pData->szLeaf = doclist.n; - memcpy(pData->p, doclist.p, doclist.n); + if( doclist.n ) memcpy(pData->p, doclist.p, doclist.n); fts5MultiIterNew2(p, pData, bDesc, ppIter); } fts5BufferFree(&doclist); @@ -193568,10 +203590,10 @@ static int sqlite3Fts5IndexBeginWrite(Fts5Index *p, int bDelete, i64 iRowid){ /* ** Commit data to disk. */ -static int sqlite3Fts5IndexSync(Fts5Index *p, int bCommit){ +static int sqlite3Fts5IndexSync(Fts5Index *p){ assert( p->rc==SQLITE_OK ); fts5IndexFlush(p); - if( bCommit ) fts5CloseReader(p); + fts5CloseReader(p); return fts5IndexReturn(p); } @@ -193768,7 +203790,7 @@ static int sqlite3Fts5IndexQuery( if( sqlite3Fts5BufferSize(&p->rc, &buf, nToken+1)==0 ){ int iIdx = 0; /* Index to search */ - memcpy(&buf.p[1], pToken, nToken); + if( nToken ) memcpy(&buf.p[1], pToken, nToken); /* Figure out which index to search and set iIdx accordingly. If this ** is a prefix query for which there is no prefix index, set iIdx to @@ -193817,7 +203839,7 @@ static int sqlite3Fts5IndexQuery( } if( p->rc ){ - sqlite3Fts5IterClose(&pRet->base); + sqlite3Fts5IterClose((Fts5IndexIter*)pRet); pRet = 0; fts5CloseReader(p); } @@ -195435,6 +205457,7 @@ static void fts5SetUniqueFlag(sqlite3_index_info *pIdxInfo){ static int fts5BestIndexMethod(sqlite3_vtab *pVTab, sqlite3_index_info *pInfo){ Fts5Table *pTab = (Fts5Table*)pVTab; Fts5Config *pConfig = pTab->pConfig; + const int nCol = pConfig->nCol; int idxFlags = 0; /* Parameter passed through to xFilter() */ int bHasMatch; int iNext; @@ -195460,24 +205483,40 @@ static int fts5BestIndexMethod(sqlite3_vtab *pVTab, sqlite3_index_info *pInfo){ int aColMap[3]; aColMap[0] = -1; - aColMap[1] = pConfig->nCol; - aColMap[2] = pConfig->nCol+1; + aColMap[1] = nCol; + aColMap[2] = nCol+1; + + assert( SQLITE_INDEX_CONSTRAINT_EQ<SQLITE_INDEX_CONSTRAINT_MATCH ); + assert( SQLITE_INDEX_CONSTRAINT_GT<SQLITE_INDEX_CONSTRAINT_MATCH ); + assert( SQLITE_INDEX_CONSTRAINT_LE<SQLITE_INDEX_CONSTRAINT_MATCH ); + assert( SQLITE_INDEX_CONSTRAINT_GE<SQLITE_INDEX_CONSTRAINT_MATCH ); + assert( SQLITE_INDEX_CONSTRAINT_LE<SQLITE_INDEX_CONSTRAINT_MATCH ); /* Set idxFlags flags for all WHERE clause terms that will be used. */ for(i=0; i<pInfo->nConstraint; i++){ struct sqlite3_index_constraint *p = &pInfo->aConstraint[i]; - int j; - for(j=0; j<ArraySize(aConstraint); j++){ - struct Constraint *pC = &aConstraint[j]; - if( p->iColumn==aColMap[pC->iCol] && p->op & pC->op ){ - if( p->usable ){ + int iCol = p->iColumn; + + if( (p->op==SQLITE_INDEX_CONSTRAINT_MATCH && iCol>=0 && iCol<=nCol) + || (p->op==SQLITE_INDEX_CONSTRAINT_EQ && iCol==nCol) + ){ + /* A MATCH operator or equivalent */ + if( p->usable ){ + idxFlags = (idxFlags & 0xFFFF) | FTS5_BI_MATCH | (iCol << 16); + aConstraint[0].iConsIndex = i; + }else{ + /* As there exists an unusable MATCH constraint this is an + ** unusable plan. Set a prohibitively high cost. */ + pInfo->estimatedCost = 1e50; + return SQLITE_OK; + } + }else if( p->op<=SQLITE_INDEX_CONSTRAINT_MATCH ){ + int j; + for(j=1; j<ArraySize(aConstraint); j++){ + struct Constraint *pC = &aConstraint[j]; + if( iCol==aColMap[pC->iCol] && (p->op & pC->op) && p->usable ){ pC->iConsIndex = i; idxFlags |= pC->fts5op; - }else if( j==0 ){ - /* As there exists an unusable MATCH constraint this is an - ** unusable plan. Set a prohibitively high cost. */ - pInfo->estimatedCost = 1e50; - return SQLITE_OK; } } } @@ -195801,7 +205840,8 @@ static int fts5PrepareStatement( if( zSql==0 ){ rc = SQLITE_NOMEM; }else{ - rc = sqlite3_prepare_v2(pConfig->db, zSql, -1, &pRet, 0); + rc = sqlite3_prepare_v3(pConfig->db, zSql, -1, + SQLITE_PREPARE_PERSISTENT, &pRet, 0); if( rc!=SQLITE_OK ){ *pConfig->pzErrmsg = sqlite3_mprintf("%s", sqlite3_errmsg(pConfig->db)); } @@ -195937,7 +205977,8 @@ static int fts5FindRankFunction(Fts5Cursor *pCsr){ char *zSql = sqlite3Fts5Mprintf(&rc, "SELECT %s", zRankArgs); if( zSql ){ sqlite3_stmt *pStmt = 0; - rc = sqlite3_prepare_v2(pConfig->db, zSql, -1, &pStmt, 0); + rc = sqlite3_prepare_v3(pConfig->db, zSql, -1, + SQLITE_PREPARE_PERSISTENT, &pStmt, 0); sqlite3_free(zSql); assert( rc==SQLITE_OK || pCsr->pRankArgStmt==0 ); if( rc==SQLITE_OK ){ @@ -196052,6 +206093,7 @@ static int fts5FilterMethod( sqlite3_value *pRowidEq = 0; /* rowid = ? expression (or NULL) */ sqlite3_value *pRowidLe = 0; /* rowid <= ? expression (or NULL) */ sqlite3_value *pRowidGe = 0; /* rowid >= ? expression (or NULL) */ + int iCol; /* Column on LHS of MATCH operator */ char **pzErrmsg = pConfig->pzErrmsg; UNUSED_PARAM(zUnused); @@ -196082,6 +206124,8 @@ static int fts5FilterMethod( if( BitFlagTest(idxNum, FTS5_BI_ROWID_EQ) ) pRowidEq = apVal[iVal++]; if( BitFlagTest(idxNum, FTS5_BI_ROWID_LE) ) pRowidLe = apVal[iVal++]; if( BitFlagTest(idxNum, FTS5_BI_ROWID_GE) ) pRowidGe = apVal[iVal++]; + iCol = (idxNum>>16); + assert( iCol>=0 && iCol<=pConfig->nCol ); assert( iVal==nVal ); bOrderByRank = ((idxNum & FTS5_BI_ORDER_RANK) ? 1 : 0); pCsr->bDesc = bDesc = ((idxNum & FTS5_BI_ORDER_DESC) ? 1 : 0); @@ -196128,7 +206172,7 @@ static int fts5FilterMethod( rc = fts5SpecialMatch(pTab, pCsr, &zExpr[1]); }else{ char **pzErr = &pTab->base.zErrMsg; - rc = sqlite3Fts5ExprNew(pConfig, zExpr, &pCsr->pExpr, pzErr); + rc = sqlite3Fts5ExprNew(pConfig, iCol, zExpr, &pCsr->pExpr, pzErr); if( rc==SQLITE_OK ){ if( bOrderByRank ){ pCsr->ePlan = FTS5_PLAN_SORTED_MATCH; @@ -196508,7 +206552,7 @@ static int fts5SyncMethod(sqlite3_vtab *pVtab){ fts5CheckTransactionState(pTab, FTS5_SYNC, 0); pTab->pConfig->pzErrmsg = &pTab->base.zErrMsg; fts5TripCursors(pTab); - rc = sqlite3Fts5StorageSync(pTab->pStorage, 1); + rc = sqlite3Fts5StorageSync(pTab->pStorage); pTab->pConfig->pzErrmsg = 0; return rc; } @@ -197319,7 +207363,7 @@ static int fts5SavepointMethod(sqlite3_vtab *pVtab, int iSavepoint){ UNUSED_PARAM(iSavepoint); /* Call below is a no-op for NDEBUG builds */ fts5CheckTransactionState(pTab, FTS5_SAVEPOINT, iSavepoint); fts5TripCursors(pTab); - return sqlite3Fts5StorageSync(pTab->pStorage, 0); + return sqlite3Fts5StorageSync(pTab->pStorage); } /* @@ -197332,7 +207376,7 @@ static int fts5ReleaseMethod(sqlite3_vtab *pVtab, int iSavepoint){ UNUSED_PARAM(iSavepoint); /* Call below is a no-op for NDEBUG builds */ fts5CheckTransactionState(pTab, FTS5_RELEASE, iSavepoint); fts5TripCursors(pTab); - return sqlite3Fts5StorageSync(pTab->pStorage, 0); + return sqlite3Fts5StorageSync(pTab->pStorage); } /* @@ -197522,15 +207566,14 @@ static void fts5ModuleDestroy(void *pCtx){ static void fts5Fts5Func( sqlite3_context *pCtx, /* Function call context */ int nArg, /* Number of args */ - sqlite3_value **apUnused /* Function arguments */ + sqlite3_value **apArg /* Function arguments */ ){ Fts5Global *pGlobal = (Fts5Global*)sqlite3_user_data(pCtx); - char buf[8]; - UNUSED_PARAM2(nArg, apUnused); - assert( nArg==0 ); - assert( sizeof(buf)>=sizeof(pGlobal) ); - memcpy(buf, (void*)&pGlobal, sizeof(pGlobal)); - sqlite3_result_blob(pCtx, buf, sizeof(pGlobal), SQLITE_TRANSIENT); + fts5_api **ppApi; + UNUSED_PARAM(nArg); + assert( nArg==1 ); + ppApi = (fts5_api**)sqlite3_value_pointer(apArg[0], "fts5_api_ptr"); + if( ppApi ) *ppApi = &pGlobal->api; } /* @@ -197543,7 +207586,7 @@ static void fts5SourceIdFunc( ){ assert( nArg==0 ); UNUSED_PARAM2(nArg, apUnused); - sqlite3_result_text(pCtx, "fts5: 2017-02-13 16:02:40 ada05cfa86ad7f5645450ac7a2a21c9aa6e57d2c", -1, SQLITE_TRANSIENT); + sqlite3_result_text(pCtx, "fts5: 2018-06-04 19:24:41 c7ee0833225bfd8c5ec2f9bf62b97c4e04d03bd9566366d5221ac8fb199a87ca", -1, SQLITE_TRANSIENT); } static int fts5Init(sqlite3 *db){ @@ -197595,7 +207638,7 @@ static int fts5Init(sqlite3 *db){ if( rc==SQLITE_OK ) rc = sqlite3Fts5VocabInit(pGlobal, db); if( rc==SQLITE_OK ){ rc = sqlite3_create_function( - db, "fts5", 0, SQLITE_UTF8, p, fts5Fts5Func, 0, 0 + db, "fts5", 1, SQLITE_UTF8, p, fts5Fts5Func, 0, 0 ); } if( rc==SQLITE_OK ){ @@ -197797,7 +207840,8 @@ static int fts5StorageGetStmt( if( zSql==0 ){ rc = SQLITE_NOMEM; }else{ - rc = sqlite3_prepare_v2(pC->db, zSql, -1, &p->aStmt[eStmt], 0); + rc = sqlite3_prepare_v3(pC->db, zSql, -1, + SQLITE_PREPARE_PERSISTENT, &p->aStmt[eStmt], 0); sqlite3_free(zSql); if( rc!=SQLITE_OK && pzErrMsg ){ *pzErrMsg = sqlite3_mprintf("%s", sqlite3_errmsg(pC->db)); @@ -197879,7 +207923,7 @@ static void fts5StorageRenameOne( static int sqlite3Fts5StorageRename(Fts5Storage *pStorage, const char *zName){ Fts5Config *pConfig = pStorage->pConfig; - int rc = sqlite3Fts5StorageSync(pStorage, 1); + int rc = sqlite3Fts5StorageSync(pStorage); fts5StorageRenameOne(pConfig, &rc, "data", zName); fts5StorageRenameOne(pConfig, &rc, "idx", zName); @@ -198118,6 +208162,7 @@ static int fts5StorageInsertDocsize( sqlite3_bind_blob(pReplace, 2, pBuf->p, pBuf->n, SQLITE_STATIC); sqlite3_step(pReplace); rc = sqlite3_reset(pReplace); + sqlite3_bind_null(pReplace, 2); } } return rc; @@ -198206,11 +208251,6 @@ static int sqlite3Fts5StorageDelete(Fts5Storage *p, i64 iDel, sqlite3_value **ap } } - /* Write the averages record */ - if( rc==SQLITE_OK ){ - rc = fts5StorageSaveTotals(p); - } - return rc; } @@ -198414,11 +208454,6 @@ static int sqlite3Fts5StorageIndexInsert( } sqlite3_free(buf.p); - /* Write the averages record */ - if( rc==SQLITE_OK ){ - rc = fts5StorageSaveTotals(p); - } - return rc; } @@ -198752,13 +208787,18 @@ static int sqlite3Fts5StorageRowCount(Fts5Storage *p, i64 *pnRow){ /* ** Flush any data currently held in-memory to disk. */ -static int sqlite3Fts5StorageSync(Fts5Storage *p, int bCommit){ - if( bCommit && p->bTotalsValid ){ - int rc = fts5StorageSaveTotals(p); +static int sqlite3Fts5StorageSync(Fts5Storage *p){ + int rc = SQLITE_OK; + i64 iLastRowid = sqlite3_last_insert_rowid(p->pConfig->db); + if( p->bTotalsValid ){ + rc = fts5StorageSaveTotals(p); p->bTotalsValid = 0; - if( rc!=SQLITE_OK ) return rc; } - return sqlite3Fts5IndexSync(p->pIndex, bCommit); + if( rc==SQLITE_OK ){ + rc = sqlite3Fts5IndexSync(p->pIndex); + } + sqlite3_set_last_insert_rowid(p->pConfig->db, iLastRowid); + return rc; } static int sqlite3Fts5StorageRollback(Fts5Storage *p){ @@ -198783,6 +208823,7 @@ static int sqlite3Fts5StorageConfigValue( } sqlite3_step(pReplace); rc = sqlite3_reset(pReplace); + sqlite3_bind_null(pReplace, 1); } if( rc==SQLITE_OK && pVal ){ int iNew = p->pConfig->iCookie + 1; @@ -200775,6 +210816,11 @@ static int sqlite3Fts5GetVarintLen(u32 iVal){ ** the number of fts5 rows that contain at least one instance of term ** $term. Field $cnt is set to the total number of instances of term ** $term in the database. +** +** instance: +** CREATE TABLE vocab(term, doc, col, offset, PRIMARY KEY(<all-fields>)); +** +** One row for each term instance in the database. */ @@ -200790,7 +210836,7 @@ struct Fts5VocabTable { char *zFts5Db; /* Db containing fts5 table */ sqlite3 *db; /* Database handle */ Fts5Global *pGlobal; /* FTS5 global object for this database */ - int eType; /* FTS5_VOCAB_COL or ROW */ + int eType; /* FTS5_VOCAB_COL, ROW or INSTANCE */ }; struct Fts5VocabCursor { @@ -200810,16 +210856,22 @@ struct Fts5VocabCursor { i64 *aCnt; i64 *aDoc; - /* Output values used by 'row' and 'col' tables */ + /* Output values used by all tables. */ i64 rowid; /* This table's current rowid value */ Fts5Buffer term; /* Current value of 'term' column */ + + /* Output values Used by 'instance' tables only */ + i64 iInstPos; + int iInstOff; }; -#define FTS5_VOCAB_COL 0 -#define FTS5_VOCAB_ROW 1 +#define FTS5_VOCAB_COL 0 +#define FTS5_VOCAB_ROW 1 +#define FTS5_VOCAB_INSTANCE 2 #define FTS5_VOCAB_COL_SCHEMA "term, col, doc, cnt" #define FTS5_VOCAB_ROW_SCHEMA "term, doc, cnt" +#define FTS5_VOCAB_INST_SCHEMA "term, doc, col, offset" /* ** Bits for the mask used as the idxNum value by xBestIndex/xFilter. @@ -200847,6 +210899,9 @@ static int fts5VocabTableType(const char *zType, char **pzErr, int *peType){ if( sqlite3_stricmp(zCopy, "row")==0 ){ *peType = FTS5_VOCAB_ROW; }else + if( sqlite3_stricmp(zCopy, "instance")==0 ){ + *peType = FTS5_VOCAB_INSTANCE; + }else { *pzErr = sqlite3_mprintf("fts5vocab: unknown table type: %Q", zCopy); rc = SQLITE_ERROR; @@ -200907,7 +210962,8 @@ static int fts5VocabInitVtab( ){ const char *azSchema[] = { "CREATE TABlE vocab(" FTS5_VOCAB_COL_SCHEMA ")", - "CREATE TABlE vocab(" FTS5_VOCAB_ROW_SCHEMA ")" + "CREATE TABlE vocab(" FTS5_VOCAB_ROW_SCHEMA ")", + "CREATE TABlE vocab(" FTS5_VOCAB_INST_SCHEMA ")" }; Fts5VocabTable *pRet = 0; @@ -200981,6 +211037,15 @@ static int fts5VocabCreateMethod( /* ** Implementation of the xBestIndex method. +** +** Only constraints of the form: +** +** term <= ? +** term == ? +** term >= ? +** +** are interpreted. Less-than and less-than-or-equal are treated +** identically, as are greater-than and greater-than-or-equal. */ static int fts5VocabBestIndexMethod( sqlite3_vtab *pUnused, @@ -201124,6 +211189,54 @@ static int fts5VocabCloseMethod(sqlite3_vtab_cursor *pCursor){ return SQLITE_OK; } +static int fts5VocabInstanceNewTerm(Fts5VocabCursor *pCsr){ + int rc = SQLITE_OK; + + if( sqlite3Fts5IterEof(pCsr->pIter) ){ + pCsr->bEof = 1; + }else{ + const char *zTerm; + int nTerm; + zTerm = sqlite3Fts5IterTerm(pCsr->pIter, &nTerm); + if( pCsr->nLeTerm>=0 ){ + int nCmp = MIN(nTerm, pCsr->nLeTerm); + int bCmp = memcmp(pCsr->zLeTerm, zTerm, nCmp); + if( bCmp<0 || (bCmp==0 && pCsr->nLeTerm<nTerm) ){ + pCsr->bEof = 1; + } + } + + sqlite3Fts5BufferSet(&rc, &pCsr->term, nTerm, (const u8*)zTerm); + } + return rc; +} + +static int fts5VocabInstanceNext(Fts5VocabCursor *pCsr){ + int eDetail = pCsr->pConfig->eDetail; + int rc = SQLITE_OK; + Fts5IndexIter *pIter = pCsr->pIter; + i64 *pp = &pCsr->iInstPos; + int *po = &pCsr->iInstOff; + + while( eDetail==FTS5_DETAIL_NONE + || sqlite3Fts5PoslistNext64(pIter->pData, pIter->nData, po, pp) + ){ + pCsr->iInstPos = 0; + pCsr->iInstOff = 0; + + rc = sqlite3Fts5IterNextScan(pCsr->pIter); + if( rc==SQLITE_OK ){ + rc = fts5VocabInstanceNewTerm(pCsr); + if( eDetail==FTS5_DETAIL_NONE ) break; + } + if( rc ){ + pCsr->bEof = 1; + break; + } + } + + return rc; +} /* ** Advance the cursor to the next row in the table. @@ -201136,13 +211249,17 @@ static int fts5VocabNextMethod(sqlite3_vtab_cursor *pCursor){ pCsr->rowid++; + if( pTab->eType==FTS5_VOCAB_INSTANCE ){ + return fts5VocabInstanceNext(pCsr); + } + if( pTab->eType==FTS5_VOCAB_COL ){ for(pCsr->iCol++; pCsr->iCol<nCol; pCsr->iCol++){ if( pCsr->aDoc[pCsr->iCol] ) break; } } - if( pTab->eType==FTS5_VOCAB_ROW || pCsr->iCol>=nCol ){ + if( pTab->eType!=FTS5_VOCAB_COL || pCsr->iCol>=nCol ){ if( sqlite3Fts5IterEof(pCsr->pIter) ){ pCsr->bEof = 1; }else{ @@ -201166,22 +211283,26 @@ static int fts5VocabNextMethod(sqlite3_vtab_cursor *pCursor){ assert( pTab->eType==FTS5_VOCAB_COL || pTab->eType==FTS5_VOCAB_ROW ); while( rc==SQLITE_OK ){ + int eDetail = pCsr->pConfig->eDetail; const u8 *pPos; int nPos; /* Position list */ i64 iPos = 0; /* 64-bit position read from poslist */ int iOff = 0; /* Current offset within position list */ pPos = pCsr->pIter->pData; nPos = pCsr->pIter->nData; - switch( pCsr->pConfig->eDetail ){ - case FTS5_DETAIL_FULL: - pPos = pCsr->pIter->pData; - nPos = pCsr->pIter->nData; - if( pTab->eType==FTS5_VOCAB_ROW ){ + + switch( pTab->eType ){ + case FTS5_VOCAB_ROW: + if( eDetail==FTS5_DETAIL_FULL ){ while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){ pCsr->aCnt[0]++; } - pCsr->aDoc[0]++; - }else{ + } + pCsr->aDoc[0]++; + break; + + case FTS5_VOCAB_COL: + if( eDetail==FTS5_DETAIL_FULL ){ int iCol = -1; while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff, &iPos) ){ int ii = FTS5_POS2COLUMN(iPos); @@ -201195,13 +211316,7 @@ static int fts5VocabNextMethod(sqlite3_vtab_cursor *pCursor){ iCol = ii; } } - } - break; - - case FTS5_DETAIL_COLUMNS: - if( pTab->eType==FTS5_VOCAB_ROW ){ - pCsr->aDoc[0]++; - }else{ + }else if( eDetail==FTS5_DETAIL_COLUMNS ){ while( 0==sqlite3Fts5PoslistNext64(pPos, nPos, &iOff,&iPos) ){ assert_nc( iPos>=0 && iPos<nCol ); if( iPos>=nCol ){ @@ -201210,18 +211325,21 @@ static int fts5VocabNextMethod(sqlite3_vtab_cursor *pCursor){ } pCsr->aDoc[iPos]++; } + }else{ + assert( eDetail==FTS5_DETAIL_NONE ); + pCsr->aDoc[0]++; } break; - default: - assert( pCsr->pConfig->eDetail==FTS5_DETAIL_NONE ); - pCsr->aDoc[0]++; + default: + assert( pTab->eType==FTS5_VOCAB_INSTANCE ); break; } if( rc==SQLITE_OK ){ rc = sqlite3Fts5IterNextScan(pCsr->pIter); } + if( pTab->eType==FTS5_VOCAB_INSTANCE ) break; if( rc==SQLITE_OK ){ zTerm = sqlite3Fts5IterTerm(pCsr->pIter, &nTerm); @@ -201251,7 +211369,9 @@ static int fts5VocabFilterMethod( int nUnused, /* Number of elements in apVal */ sqlite3_value **apVal /* Arguments for the indexing scheme */ ){ + Fts5VocabTable *pTab = (Fts5VocabTable*)pCursor->pVtab; Fts5VocabCursor *pCsr = (Fts5VocabCursor*)pCursor; + int eType = pTab->eType; int rc = SQLITE_OK; int iVal = 0; @@ -201291,11 +211411,16 @@ static int fts5VocabFilterMethod( } } - if( rc==SQLITE_OK ){ rc = sqlite3Fts5IndexQuery(pCsr->pIndex, zTerm, nTerm, f, 0, &pCsr->pIter); } - if( rc==SQLITE_OK ){ + if( rc==SQLITE_OK && eType==FTS5_VOCAB_INSTANCE ){ + rc = fts5VocabInstanceNewTerm(pCsr); + } + if( rc==SQLITE_OK + && !pCsr->bEof + && (eType!=FTS5_VOCAB_INSTANCE || pCsr->pConfig->eDetail!=FTS5_DETAIL_NONE) + ){ rc = fts5VocabNextMethod(pCursor); } @@ -201337,13 +211462,41 @@ static int fts5VocabColumnMethod( }else{ iVal = pCsr->aCnt[pCsr->iCol]; } - }else{ + }else if( eType==FTS5_VOCAB_ROW ){ assert( iCol==1 || iCol==2 ); if( iCol==1 ){ iVal = pCsr->aDoc[0]; }else{ iVal = pCsr->aCnt[0]; } + }else{ + assert( eType==FTS5_VOCAB_INSTANCE ); + switch( iCol ){ + case 1: + sqlite3_result_int64(pCtx, pCsr->pIter->iRowid); + break; + case 2: { + int ii = -1; + if( eDetail==FTS5_DETAIL_FULL ){ + ii = FTS5_POS2COLUMN(pCsr->iInstPos); + }else if( eDetail==FTS5_DETAIL_COLUMNS ){ + ii = (int)pCsr->iInstPos; + } + if( ii>=0 && ii<pCsr->pConfig->nCol ){ + const char *z = pCsr->pConfig->azCol[ii]; + sqlite3_result_text(pCtx, z, -1, SQLITE_STATIC); + } + break; + } + default: { + assert( iCol==3 ); + if( eDetail==FTS5_DETAIL_FULL ){ + int ii = FTS5_POS2OFFSET(pCsr->iInstPos); + sqlite3_result_int(pCtx, ii); + } + break; + } + } } if( iVal>0 ) sqlite3_result_int64(pCtx, iVal); @@ -201402,7 +211555,670 @@ static int sqlite3Fts5VocabInit(Fts5Global *pGlobal, sqlite3 *db){ #endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_FTS5) */ /************** End of fts5.c ************************************************/ +/************** Begin file stmt.c ********************************************/ +/* +** 2017-05-31 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file demonstrates an eponymous virtual table that returns information +** about all prepared statements for the database connection. +** +** Usage example: +** +** .load ./stmt +** .mode line +** .header on +** SELECT * FROM stmt; +*/ +#if !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) +#if !defined(SQLITEINT_H) +/* #include "sqlite3ext.h" */ +#endif +SQLITE_EXTENSION_INIT1 +/* #include <assert.h> */ +/* #include <string.h> */ + +#ifndef SQLITE_OMIT_VIRTUALTABLE + +/* stmt_vtab is a subclass of sqlite3_vtab which will +** serve as the underlying representation of a stmt virtual table +*/ +typedef struct stmt_vtab stmt_vtab; +struct stmt_vtab { + sqlite3_vtab base; /* Base class - must be first */ + sqlite3 *db; /* Database connection for this stmt vtab */ +}; + +/* stmt_cursor is a subclass of sqlite3_vtab_cursor which will +** serve as the underlying representation of a cursor that scans +** over rows of the result +*/ +typedef struct stmt_cursor stmt_cursor; +struct stmt_cursor { + sqlite3_vtab_cursor base; /* Base class - must be first */ + sqlite3 *db; /* Database connection for this cursor */ + sqlite3_stmt *pStmt; /* Statement cursor is currently pointing at */ + sqlite3_int64 iRowid; /* The rowid */ +}; + +/* +** The stmtConnect() method is invoked to create a new +** stmt_vtab that describes the stmt virtual table. +** +** Think of this routine as the constructor for stmt_vtab objects. +** +** All this routine needs to do is: +** +** (1) Allocate the stmt_vtab object and initialize all fields. +** +** (2) Tell SQLite (via the sqlite3_declare_vtab() interface) what the +** result set of queries against stmt will look like. +*/ +static int stmtConnect( + sqlite3 *db, + void *pAux, + int argc, const char *const*argv, + sqlite3_vtab **ppVtab, + char **pzErr +){ + stmt_vtab *pNew; + int rc; + +/* Column numbers */ +#define STMT_COLUMN_SQL 0 /* SQL for the statement */ +#define STMT_COLUMN_NCOL 1 /* Number of result columns */ +#define STMT_COLUMN_RO 2 /* True if read-only */ +#define STMT_COLUMN_BUSY 3 /* True if currently busy */ +#define STMT_COLUMN_NSCAN 4 /* SQLITE_STMTSTATUS_FULLSCAN_STEP */ +#define STMT_COLUMN_NSORT 5 /* SQLITE_STMTSTATUS_SORT */ +#define STMT_COLUMN_NAIDX 6 /* SQLITE_STMTSTATUS_AUTOINDEX */ +#define STMT_COLUMN_NSTEP 7 /* SQLITE_STMTSTATUS_VM_STEP */ +#define STMT_COLUMN_REPREP 8 /* SQLITE_STMTSTATUS_REPREPARE */ +#define STMT_COLUMN_RUN 9 /* SQLITE_STMTSTATUS_RUN */ +#define STMT_COLUMN_MEM 10 /* SQLITE_STMTSTATUS_MEMUSED */ + + + rc = sqlite3_declare_vtab(db, + "CREATE TABLE x(sql,ncol,ro,busy,nscan,nsort,naidx,nstep," + "reprep,run,mem)"); + if( rc==SQLITE_OK ){ + pNew = sqlite3_malloc( sizeof(*pNew) ); + *ppVtab = (sqlite3_vtab*)pNew; + if( pNew==0 ) return SQLITE_NOMEM; + memset(pNew, 0, sizeof(*pNew)); + pNew->db = db; + } + return rc; +} + +/* +** This method is the destructor for stmt_cursor objects. +*/ +static int stmtDisconnect(sqlite3_vtab *pVtab){ + sqlite3_free(pVtab); + return SQLITE_OK; +} + +/* +** Constructor for a new stmt_cursor object. +*/ +static int stmtOpen(sqlite3_vtab *p, sqlite3_vtab_cursor **ppCursor){ + stmt_cursor *pCur; + pCur = sqlite3_malloc( sizeof(*pCur) ); + if( pCur==0 ) return SQLITE_NOMEM; + memset(pCur, 0, sizeof(*pCur)); + pCur->db = ((stmt_vtab*)p)->db; + *ppCursor = &pCur->base; + return SQLITE_OK; +} + +/* +** Destructor for a stmt_cursor. +*/ +static int stmtClose(sqlite3_vtab_cursor *cur){ + sqlite3_free(cur); + return SQLITE_OK; +} + + +/* +** Advance a stmt_cursor to its next row of output. +*/ +static int stmtNext(sqlite3_vtab_cursor *cur){ + stmt_cursor *pCur = (stmt_cursor*)cur; + pCur->iRowid++; + pCur->pStmt = sqlite3_next_stmt(pCur->db, pCur->pStmt); + return SQLITE_OK; +} + +/* +** Return values of columns for the row at which the stmt_cursor +** is currently pointing. +*/ +static int stmtColumn( + sqlite3_vtab_cursor *cur, /* The cursor */ + sqlite3_context *ctx, /* First argument to sqlite3_result_...() */ + int i /* Which column to return */ +){ + stmt_cursor *pCur = (stmt_cursor*)cur; + switch( i ){ + case STMT_COLUMN_SQL: { + sqlite3_result_text(ctx, sqlite3_sql(pCur->pStmt), -1, SQLITE_TRANSIENT); + break; + } + case STMT_COLUMN_NCOL: { + sqlite3_result_int(ctx, sqlite3_column_count(pCur->pStmt)); + break; + } + case STMT_COLUMN_RO: { + sqlite3_result_int(ctx, sqlite3_stmt_readonly(pCur->pStmt)); + break; + } + case STMT_COLUMN_BUSY: { + sqlite3_result_int(ctx, sqlite3_stmt_busy(pCur->pStmt)); + break; + } + case STMT_COLUMN_MEM: { + i = SQLITE_STMTSTATUS_MEMUSED + + STMT_COLUMN_NSCAN - SQLITE_STMTSTATUS_FULLSCAN_STEP; + /* Fall thru */ + } + case STMT_COLUMN_NSCAN: + case STMT_COLUMN_NSORT: + case STMT_COLUMN_NAIDX: + case STMT_COLUMN_NSTEP: + case STMT_COLUMN_REPREP: + case STMT_COLUMN_RUN: { + sqlite3_result_int(ctx, sqlite3_stmt_status(pCur->pStmt, + i-STMT_COLUMN_NSCAN+SQLITE_STMTSTATUS_FULLSCAN_STEP, 0)); + break; + } + } + return SQLITE_OK; +} + +/* +** Return the rowid for the current row. In this implementation, the +** rowid is the same as the output value. +*/ +static int stmtRowid(sqlite3_vtab_cursor *cur, sqlite_int64 *pRowid){ + stmt_cursor *pCur = (stmt_cursor*)cur; + *pRowid = pCur->iRowid; + return SQLITE_OK; +} + +/* +** Return TRUE if the cursor has been moved off of the last +** row of output. +*/ +static int stmtEof(sqlite3_vtab_cursor *cur){ + stmt_cursor *pCur = (stmt_cursor*)cur; + return pCur->pStmt==0; +} + +/* +** This method is called to "rewind" the stmt_cursor object back +** to the first row of output. This method is always called at least +** once prior to any call to stmtColumn() or stmtRowid() or +** stmtEof(). +*/ +static int stmtFilter( + sqlite3_vtab_cursor *pVtabCursor, + int idxNum, const char *idxStr, + int argc, sqlite3_value **argv +){ + stmt_cursor *pCur = (stmt_cursor *)pVtabCursor; + pCur->pStmt = 0; + pCur->iRowid = 0; + return stmtNext(pVtabCursor); +} + +/* +** SQLite will invoke this method one or more times while planning a query +** that uses the stmt virtual table. This routine needs to create +** a query plan for each invocation and compute an estimated cost for that +** plan. +*/ +static int stmtBestIndex( + sqlite3_vtab *tab, + sqlite3_index_info *pIdxInfo +){ + pIdxInfo->estimatedCost = (double)500; + pIdxInfo->estimatedRows = 500; + return SQLITE_OK; +} + +/* +** This following structure defines all the methods for the +** stmt virtual table. +*/ +static sqlite3_module stmtModule = { + 0, /* iVersion */ + 0, /* xCreate */ + stmtConnect, /* xConnect */ + stmtBestIndex, /* xBestIndex */ + stmtDisconnect, /* xDisconnect */ + 0, /* xDestroy */ + stmtOpen, /* xOpen - open a cursor */ + stmtClose, /* xClose - close a cursor */ + stmtFilter, /* xFilter - configure scan constraints */ + stmtNext, /* xNext - advance a cursor */ + stmtEof, /* xEof - check for end of scan */ + stmtColumn, /* xColumn - read data */ + stmtRowid, /* xRowid - read data */ + 0, /* xUpdate */ + 0, /* xBegin */ + 0, /* xSync */ + 0, /* xCommit */ + 0, /* xRollback */ + 0, /* xFindMethod */ + 0, /* xRename */ + 0, /* xSavepoint */ + 0, /* xRelease */ + 0, /* xRollbackTo */ +}; + +#endif /* SQLITE_OMIT_VIRTUALTABLE */ + +SQLITE_PRIVATE int sqlite3StmtVtabInit(sqlite3 *db){ + int rc = SQLITE_OK; +#ifndef SQLITE_OMIT_VIRTUALTABLE + rc = sqlite3_create_module(db, "sqlite_stmt", &stmtModule, 0); +#endif + return rc; +} + +#ifndef SQLITE_CORE +#ifdef _WIN32 +__declspec(dllexport) +#endif +SQLITE_API int sqlite3_stmt_init( + sqlite3 *db, + char **pzErrMsg, + const sqlite3_api_routines *pApi +){ + int rc = SQLITE_OK; + SQLITE_EXTENSION_INIT2(pApi); +#ifndef SQLITE_OMIT_VIRTUALTABLE + rc = sqlite3StmtVtabInit(db); +#endif + return rc; +} +#endif /* SQLITE_CORE */ +#endif /* !defined(SQLITE_CORE) || defined(SQLITE_ENABLE_STMTVTAB) */ + +/************** End of stmt.c ************************************************/ +#if __LINE__!=211858 +#undef SQLITE_SOURCE_ID +#define SQLITE_SOURCE_ID "2018-06-04 19:24:41 c7ee0833225bfd8c5ec2f9bf62b97c4e04d03bd9566366d5221ac8fb199aalt2" +#endif +/* Return the source-id for this library */ +SQLITE_API const char *sqlite3_sourceid(void){ return SQLITE_SOURCE_ID; } +/************************** End of sqlite3.c ******************************/ #else // USE_LIBSQLITE3 // If users really want to link against the system sqlite3 we // need to make this file a noop. #endif +/* +** 2014-09-08 +** +** The author disclaims copyright to this source code. In place of +** a legal notice, here is a blessing: +** +** May you do good and not evil. +** May you find forgiveness for yourself and forgive others. +** May you share freely, never taking more than you give. +** +************************************************************************* +** +** This file contains the bulk of the implementation of the +** user-authentication extension feature. Some parts of the user- +** authentication code are contained within the SQLite core (in the +** src/ subdirectory of the main source code tree) but those parts +** that could reasonable be separated out are moved into this file. +** +** To compile with the user-authentication feature, append this file to +** end of an SQLite amalgamation, then add the SQLITE_USER_AUTHENTICATION +** compile-time option. See the user-auth.txt file in the same source +** directory as this file for additional information. +*/ +#ifdef SQLITE_USER_AUTHENTICATION +#ifndef SQLITEINT_H +# include "sqliteInt.h" +#endif + +/* +** Prepare an SQL statement for use by the user authentication logic. +** Return a pointer to the prepared statement on success. Return a +** NULL pointer if there is an error of any kind. +*/ +static sqlite3_stmt *sqlite3UserAuthPrepare( + sqlite3 *db, + const char *zFormat, + ... +){ + sqlite3_stmt *pStmt; + char *zSql; + int rc; + va_list ap; + int savedFlags = db->flags; + + va_start(ap, zFormat); + zSql = sqlite3_vmprintf(zFormat, ap); + va_end(ap); + if( zSql==0 ) return 0; + db->flags |= SQLITE_WriteSchema; + rc = sqlite3_prepare_v2(db, zSql, -1, &pStmt, 0); + db->flags = savedFlags; + sqlite3_free(zSql); + if( rc ){ + sqlite3_finalize(pStmt); + pStmt = 0; + } + return pStmt; +} + +/* +** Check to see if the sqlite_user table exists in database zDb. +*/ +static int userTableExists(sqlite3 *db, const char *zDb){ + int rc; + sqlite3_mutex_enter(db->mutex); + sqlite3BtreeEnterAll(db); + if( db->init.busy==0 ){ + char *zErr = 0; + sqlite3Init(db, &zErr); + sqlite3DbFree(db, zErr); + } + rc = sqlite3FindTable(db, "sqlite_user", zDb)!=0; + sqlite3BtreeLeaveAll(db); + sqlite3_mutex_leave(db->mutex); + return rc; +} + +/* +** Check to see if database zDb has a "sqlite_user" table and if it does +** whether that table can authenticate zUser with nPw,zPw. Write one of +** the UAUTH_* user authorization level codes into *peAuth and return a +** result code. +*/ +static int userAuthCheckLogin( + sqlite3 *db, /* The database connection to check */ + const char *zDb, /* Name of specific database to check */ + u8 *peAuth /* OUT: One of UAUTH_* constants */ +){ + sqlite3_stmt *pStmt; + int rc; + + *peAuth = UAUTH_Unknown; + if( !userTableExists(db, "main") ){ + *peAuth = UAUTH_Admin; /* No sqlite_user table. Everybody is admin. */ + return SQLITE_OK; + } + if( db->auth.zAuthUser==0 ){ + *peAuth = UAUTH_Fail; + return SQLITE_OK; + } + pStmt = sqlite3UserAuthPrepare(db, + "SELECT pw=sqlite_crypt(?1,pw), isAdmin FROM \"%w\".sqlite_user" + " WHERE uname=?2", zDb); + if( pStmt==0 ) return SQLITE_NOMEM; + sqlite3_bind_blob(pStmt, 1, db->auth.zAuthPW, db->auth.nAuthPW,SQLITE_STATIC); + sqlite3_bind_text(pStmt, 2, db->auth.zAuthUser, -1, SQLITE_STATIC); + rc = sqlite3_step(pStmt); + if( rc==SQLITE_ROW && sqlite3_column_int(pStmt,0) ){ + *peAuth = sqlite3_column_int(pStmt, 1) + UAUTH_User; + }else{ + *peAuth = UAUTH_Fail; + } + return sqlite3_finalize(pStmt); +} +int sqlite3UserAuthCheckLogin( + sqlite3 *db, /* The database connection to check */ + const char *zDb, /* Name of specific database to check */ + u8 *peAuth /* OUT: One of UAUTH_* constants */ +){ + int rc; + u8 savedAuthLevel; + assert( zDb!=0 ); + assert( peAuth!=0 ); + savedAuthLevel = db->auth.authLevel; + db->auth.authLevel = UAUTH_Admin; + rc = userAuthCheckLogin(db, zDb, peAuth); + db->auth.authLevel = savedAuthLevel; + return rc; +} + +/* +** If the current authLevel is UAUTH_Unknown, the take actions to figure +** out what authLevel should be +*/ +void sqlite3UserAuthInit(sqlite3 *db){ + if( db->auth.authLevel==UAUTH_Unknown ){ + u8 authLevel = UAUTH_Fail; + sqlite3UserAuthCheckLogin(db, "main", &authLevel); + db->auth.authLevel = authLevel; + if( authLevel<UAUTH_Admin ) db->flags &= ~SQLITE_WriteSchema; + } +} + +/* +** Implementation of the sqlite_crypt(X,Y) function. +** +** If Y is NULL then generate a new hash for password X and return that +** hash. If Y is not null, then generate a hash for password X using the +** same salt as the previous hash Y and return the new hash. +*/ +void sqlite3CryptFunc( + sqlite3_context *context, + int NotUsed, + sqlite3_value **argv +){ + const char *zIn; + int nIn, ii; + u8 *zOut; + char zSalt[8]; + zIn = sqlite3_value_blob(argv[0]); + nIn = sqlite3_value_bytes(argv[0]); + if( sqlite3_value_type(argv[1])==SQLITE_BLOB + && sqlite3_value_bytes(argv[1])==nIn+sizeof(zSalt) + ){ + memcpy(zSalt, sqlite3_value_blob(argv[1]), sizeof(zSalt)); + }else{ + sqlite3_randomness(sizeof(zSalt), zSalt); + } + zOut = sqlite3_malloc( nIn+sizeof(zSalt) ); + if( zOut==0 ){ + sqlite3_result_error_nomem(context); + }else{ + memcpy(zOut, zSalt, sizeof(zSalt)); + for(ii=0; ii<nIn; ii++){ + zOut[ii+sizeof(zSalt)] = zIn[ii]^zSalt[ii&0x7]; + } + sqlite3_result_blob(context, zOut, nIn+sizeof(zSalt), sqlite3_free); + } +} + +/* +** If a database contains the SQLITE_USER table, then the +** sqlite3_user_authenticate() interface must be invoked with an +** appropriate username and password prior to enable read and write +** access to the database. +** +** Return SQLITE_OK on success or SQLITE_ERROR if the username/password +** combination is incorrect or unknown. +** +** If the SQLITE_USER table is not present in the database file, then +** this interface is a harmless no-op returnning SQLITE_OK. +*/ +int sqlite3_user_authenticate( + sqlite3 *db, /* The database connection */ + const char *zUsername, /* Username */ + const char *zPW, /* Password or credentials */ + int nPW /* Number of bytes in aPW[] */ +){ + int rc; + u8 authLevel = UAUTH_Fail; + db->auth.authLevel = UAUTH_Unknown; + sqlite3_free(db->auth.zAuthUser); + sqlite3_free(db->auth.zAuthPW); + memset(&db->auth, 0, sizeof(db->auth)); + db->auth.zAuthUser = sqlite3_mprintf("%s", zUsername); + if( db->auth.zAuthUser==0 ) return SQLITE_NOMEM; + db->auth.zAuthPW = sqlite3_malloc( nPW+1 ); + if( db->auth.zAuthPW==0 ) return SQLITE_NOMEM; + memcpy(db->auth.zAuthPW,zPW,nPW); + db->auth.nAuthPW = nPW; + rc = sqlite3UserAuthCheckLogin(db, "main", &authLevel); + db->auth.authLevel = authLevel; + sqlite3ExpirePreparedStatements(db); + if( rc ){ + return rc; /* OOM error, I/O error, etc. */ + } + if( authLevel<UAUTH_User ){ + return SQLITE_AUTH; /* Incorrect username and/or password */ + } + return SQLITE_OK; /* Successful login */ +} + +/* +** The sqlite3_user_add() interface can be used (by an admin user only) +** to create a new user. When called on a no-authentication-required +** database, this routine converts the database into an authentication- +** required database, automatically makes the added user an +** administrator, and logs in the current connection as that user. +** The sqlite3_user_add() interface only works for the "main" database, not +** for any ATTACH-ed databases. Any call to sqlite3_user_add() by a +** non-admin user results in an error. +*/ +int sqlite3_user_add( + sqlite3 *db, /* Database connection */ + const char *zUsername, /* Username to be added */ + const char *aPW, /* Password or credentials */ + int nPW, /* Number of bytes in aPW[] */ + int isAdmin /* True to give new user admin privilege */ +){ + sqlite3_stmt *pStmt; + int rc; + sqlite3UserAuthInit(db); + if( db->auth.authLevel<UAUTH_Admin ) return SQLITE_AUTH; + if( !userTableExists(db, "main") ){ + if( !isAdmin ) return SQLITE_AUTH; + pStmt = sqlite3UserAuthPrepare(db, + "CREATE TABLE sqlite_user(\n" + " uname TEXT PRIMARY KEY,\n" + " isAdmin BOOLEAN,\n" + " pw BLOB\n" + ") WITHOUT ROWID;"); + if( pStmt==0 ) return SQLITE_NOMEM; + sqlite3_step(pStmt); + rc = sqlite3_finalize(pStmt); + if( rc ) return rc; + } + pStmt = sqlite3UserAuthPrepare(db, + "INSERT INTO sqlite_user(uname,isAdmin,pw)" + " VALUES(%Q,%d,sqlite_crypt(?1,NULL))", + zUsername, isAdmin!=0); + if( pStmt==0 ) return SQLITE_NOMEM; + sqlite3_bind_blob(pStmt, 1, aPW, nPW, SQLITE_STATIC); + sqlite3_step(pStmt); + rc = sqlite3_finalize(pStmt); + if( rc ) return rc; + if( db->auth.zAuthUser==0 ){ + assert( isAdmin!=0 ); + sqlite3_user_authenticate(db, zUsername, aPW, nPW); + } + return SQLITE_OK; +} + +/* +** The sqlite3_user_change() interface can be used to change a users +** login credentials or admin privilege. Any user can change their own +** login credentials. Only an admin user can change another users login +** credentials or admin privilege setting. No user may change their own +** admin privilege setting. +*/ +int sqlite3_user_change( + sqlite3 *db, /* Database connection */ + const char *zUsername, /* Username to change */ + const char *aPW, /* Modified password or credentials */ + int nPW, /* Number of bytes in aPW[] */ + int isAdmin /* Modified admin privilege for the user */ +){ + sqlite3_stmt *pStmt; + int rc; + u8 authLevel; + + authLevel = db->auth.authLevel; + if( authLevel<UAUTH_User ){ + /* Must be logged in to make a change */ + return SQLITE_AUTH; + } + if( strcmp(db->auth.zAuthUser, zUsername)!=0 ){ + if( db->auth.authLevel<UAUTH_Admin ){ + /* Must be an administrator to change a different user */ + return SQLITE_AUTH; + } + }else if( isAdmin!=(authLevel==UAUTH_Admin) ){ + /* Cannot change the isAdmin setting for self */ + return SQLITE_AUTH; + } + db->auth.authLevel = UAUTH_Admin; + if( !userTableExists(db, "main") ){ + /* This routine is a no-op if the user to be modified does not exist */ + }else{ + pStmt = sqlite3UserAuthPrepare(db, + "UPDATE sqlite_user SET isAdmin=%d, pw=sqlite_crypt(?1,NULL)" + " WHERE uname=%Q", isAdmin, zUsername); + if( pStmt==0 ){ + rc = SQLITE_NOMEM; + }else{ + sqlite3_bind_blob(pStmt, 1, aPW, nPW, SQLITE_STATIC); + sqlite3_step(pStmt); + rc = sqlite3_finalize(pStmt); + } + } + db->auth.authLevel = authLevel; + return rc; +} + +/* +** The sqlite3_user_delete() interface can be used (by an admin user only) +** to delete a user. The currently logged-in user cannot be deleted, +** which guarantees that there is always an admin user and hence that +** the database cannot be converted into a no-authentication-required +** database. +*/ +int sqlite3_user_delete( + sqlite3 *db, /* Database connection */ + const char *zUsername /* Username to remove */ +){ + sqlite3_stmt *pStmt; + if( db->auth.authLevel<UAUTH_Admin ){ + /* Must be an administrator to delete a user */ + return SQLITE_AUTH; + } + if( strcmp(db->auth.zAuthUser, zUsername)==0 ){ + /* Cannot delete self */ + return SQLITE_AUTH; + } + if( !userTableExists(db, "main") ){ + /* This routine is a no-op if the user to be deleted does not exist */ + return SQLITE_OK; + } + pStmt = sqlite3UserAuthPrepare(db, + "DELETE FROM sqlite_user WHERE uname=%Q", zUsername); + if( pStmt==0 ) return SQLITE_NOMEM; + sqlite3_step(pStmt); + return sqlite3_finalize(pStmt); +} + +#endif /* SQLITE_USER_AUTHENTICATION */ |