docs: unified man page references to use \fI

17 files changed, 45 insertions, 45 deletions

diff --git a/docs/libcurl/curl_easy_perform.3 b/docs/libcurl/curl_easy_perform.3
index e0a88cbcf..48c1f3117 100644
--- a/docs/libcurl/curl_easy_perform.3
+++ b/docs/libcurl/curl_easy_perform.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -55,7 +55,7 @@ While the \fBeasy_handle\fP is added to a multi handle, it cannot be used by
 .SH RETURN VALUE
 CURLE_OK (0) means everything was ok, non-zero means an error occurred as
 .I <curl/curl.h>
-defines - see \fIlibcurl-errors(3)\fP. If the \fBCURLOPT_ERRORBUFFER(3)\fP was
+defines - see \fIlibcurl-errors(3)\fP. If the \fICURLOPT_ERRORBUFFER(3)\fP was
 set with \fIcurl_easy_setopt(3)\fP there will be a readable error message in
 the error buffer when non-zero is returned.
 .SH EXAMPLE
diff --git a/docs/libcurl/curl_easy_recv.3 b/docs/libcurl/curl_easy_recv.3
index aed40b951..3560cc511 100644
--- a/docs/libcurl/curl_easy_recv.3
+++ b/docs/libcurl/curl_easy_recv.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -41,7 +41,7 @@ data. \fBbuflen\fP is the maximum amount of data you can get in that
 buffer. The variable \fBn\fP points to will receive the number of received
 bytes.
 
-To establish the connection, set \fBCURLOPT_CONNECT_ONLY(3)\fP option before
+To establish the connection, set \fICURLOPT_CONNECT_ONLY(3)\fP option before
 calling \fIcurl_easy_perform(3)\fP or \fIcurl_multi_perform(3)\fP. Note that
 \fIcurl_easy_recv(3)\fP does not work on connections that were created without
 this option.
@@ -49,7 +49,7 @@ this option.
 You must ensure that the socket has data to read before calling
 \fIcurl_easy_recv(3)\fP, otherwise the call will return \fBCURLE_AGAIN\fP -
 the socket is used in non-blocking mode internally. Use
-\fIcurl_easy_getinfo(3)\fP with \fBCURLINFO_ACTIVESOCKET(3)\fP to obtain the
+\fIcurl_easy_getinfo(3)\fP with \fICURLINFO_ACTIVESOCKET(3)\fP to obtain the
 socket; use your operating system facilities like \fIselect(2)\fP to check if
 it has any data you can read.
 .SH AVAILABILITY
diff --git a/docs/libcurl/curl_easy_send.3 b/docs/libcurl/curl_easy_send.3
index c1c4ce4a5..2a7443985 100644
--- a/docs/libcurl/curl_easy_send.3
+++ b/docs/libcurl/curl_easy_send.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -39,7 +39,7 @@ connection set-up.
 \fBbuffer\fP is a pointer to the data of length \fBbuflen\fP that you want sent.
 The variable \fBn\fP points to will receive the number of sent bytes.
 
-To establish the connection, set \fBCURLOPT_CONNECT_ONLY(3)\fP option before
+To establish the connection, set \fICURLOPT_CONNECT_ONLY(3)\fP option before
 calling \fIcurl_easy_perform(3)\fP or \fIcurl_multi_perform()\fP. Note that
 \fIcurl_easy_send(3)\fP will not work on connections that were created without
 this option.
@@ -47,7 +47,7 @@ this option.
 You must ensure that the socket is writable before calling
 \fIcurl_easy_send(3)\fP, otherwise the call will return \fBCURLE_AGAIN\fP -
 the socket is used in non-blocking mode internally. Use
-\fIcurl_easy_getinfo(3)\fP with \fBCURLINFO_ACTIVESOCKET(3)\fP to obtain the
+\fIcurl_easy_getinfo(3)\fP with \fICURLINFO_ACTIVESOCKET(3)\fP to obtain the
 socket; use your operating system facilities like \fIselect(2)\fP to check if
 it can be written to.
 .SH AVAILABILITY
diff --git a/docs/libcurl/curl_formadd.3 b/docs/libcurl/curl_formadd.3
index 716d82bbb..6923913d4 100644
--- a/docs/libcurl/curl_formadd.3
+++ b/docs/libcurl/curl_formadd.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -32,7 +32,7 @@ curl_formadd - add a section to a multipart/formdata HTTP POST
 curl_formadd() is used to append sections when building a multipart/formdata
 HTTP POST (sometimes referred to as RFC2388-style posts). Append one section
 at a time until you've added all the sections you want included and then you
-pass the \fIfirstitem\fP pointer as parameter to \fBCURLOPT_HTTPPOST(3)\fP.
+pass the \fIfirstitem\fP pointer as parameter to \fICURLOPT_HTTPPOST(3)\fP.
 \fIlastitem\fP is set after each \fIcurl_formadd(3)\fP call and on repeated
 invokes it should be left as set to allow repeated invokes to find the end of
 the list faster.
diff --git a/docs/libcurl/curl_formfree.3 b/docs/libcurl/curl_formfree.3
index e651b8e87..a2536cd9e 100644
--- a/docs/libcurl/curl_formfree.3
+++ b/docs/libcurl/curl_formfree.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -33,7 +33,7 @@ curl_formfree() is used to clean up data previously built/appended with
 typically means after \fIcurl_easy_perform(3)\fP has been called.
 
 The pointer to free is the same pointer you passed to the
-\fBCURLOPT_HTTPPOST(3)\fP option, which is the \fIfirstitem\fP pointer from
+\fICURLOPT_HTTPPOST(3)\fP option, which is the \fIfirstitem\fP pointer from
 the \fIcurl_formadd(3)\fP invoke(s).
 
 \fBform\fP is the pointer as returned from a previous call to
diff --git a/docs/libcurl/curl_global_cleanup.3 b/docs/libcurl/curl_global_cleanup.3
index d232263e7..2e3ff0362 100644
--- a/docs/libcurl/curl_global_cleanup.3
+++ b/docs/libcurl/curl_global_cleanup.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -28,7 +28,7 @@ curl_global_cleanup - global libcurl cleanup
 .BI "void curl_global_cleanup(void);"
 .ad
 .SH DESCRIPTION
-This function releases resources acquired by \fBcurl_global_init(3)\fP.
+This function releases resources acquired by \fIcurl_global_init(3)\fP.
 
 You should call \fIcurl_global_cleanup(3)\fP once for each call you make to
 \fIcurl_global_init(3)\fP, after you are done using libcurl.
@@ -36,11 +36,11 @@ You should call \fIcurl_global_cleanup(3)\fP once for each call you make to
 \fBThis function is not thread safe.\fP You must not call it when any other
 thread in the program (i.e. a thread sharing the same memory) is running.
 This doesn't just mean no other thread that is using libcurl.  Because
-\fBcurl_global_cleanup(3)\fP calls functions of other libraries that are
+\fIcurl_global_cleanup(3)\fP calls functions of other libraries that are
 similarly thread unsafe, it could conflict with any other thread that uses
 these other libraries.
 
-See the description in \fBlibcurl(3)\fP of global environment requirements for
+See the description in \fIlibcurl(3)\fP of global environment requirements for
 details of how to use this function.
 
 .SH "SEE ALSO"
diff --git a/docs/libcurl/curl_global_init.3 b/docs/libcurl/curl_global_init.3
index c578414de..d56df5b39 100644
--- a/docs/libcurl/curl_global_init.3
+++ b/docs/libcurl/curl_global_init.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -54,7 +54,7 @@ If you are initializing libcurl from a Windows DLL you should not initialize it
 from DllMain or a static initializer because Windows holds the loader lock
 during that time and it could cause a deadlock.
 
-See the description in \fBlibcurl(3)\fP of global environment requirements for
+See the description in \fIlibcurl(3)\fP of global environment requirements for
 details of how to use this function.
 
 .SH FLAGS
diff --git a/docs/libcurl/curl_multi_socket.3 b/docs/libcurl/curl_multi_socket.3
index 77d2a4f92..52abf1ef8 100644
--- a/docs/libcurl/curl_multi_socket.3
+++ b/docs/libcurl/curl_multi_socket.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -43,7 +43,7 @@ decreases by one, it DOES NOT necessarily mean that this exact socket/transfer
 is the one that completed. Use \fIcurl_multi_info_read(3)\fP to figure out
 which easy handle that completed.
 
-The \fBcurl_multi_socket_action(3)\fP functions inform the application about
+The \fIcurl_multi_socket_action(3)\fP functions inform the application about
 updates in the socket (file descriptor) status by doing none, one, or multiple
 calls to the socket callback function set with the CURLMOPT_SOCKETFUNCTION
 option to \fIcurl_multi_setopt(3)\fP. They update the status with changes
@@ -52,7 +52,7 @@ since the previous time the callback was called.
 Get the timeout time by setting the \fICURLMOPT_TIMERFUNCTION\fP option with
 \fIcurl_multi_setopt(3)\fP. Your application will then get called with
 information on how long to wait for socket actions at most before doing the
-timeout action: call the \fBcurl_multi_socket_action(3)\fP function with the
+timeout action: call the \fIcurl_multi_socket_action(3)\fP function with the
 \fBsockfd\fP argument set to CURL_SOCKET_TIMEOUT. You can also use the
 \fIcurl_multi_timeout(3)\fP function to poll the value at any given time, but
 for an event-based system using the callback is far better than relying on
@@ -63,7 +63,7 @@ equivalent to \fIcurl_multi_socket_action(3)\fP with \fBev_bitmask\fP set to
 0.
 
 Force libcurl to (re-)check all its internal sockets and transfers instead of
-just a single one by calling \fBcurl_multi_socket_all(3)\fP. Note that there
+just a single one by calling \fIcurl_multi_socket_all(3)\fP. Note that there
 should not be any reason to use this function!
 .SH "CALLBACK DETAILS"
 
diff --git a/docs/libcurl/curl_multi_socket_action.3 b/docs/libcurl/curl_multi_socket_action.3
index 2d5eef6dd..65a3fb398 100644
--- a/docs/libcurl/curl_multi_socket_action.3
+++ b/docs/libcurl/curl_multi_socket_action.3
@@ -61,7 +61,7 @@ called.
 Get the timeout time by setting the \fICURLMOPT_TIMERFUNCTION(3)\fP option
 with \fIcurl_multi_setopt(3)\fP. Your application will then get called with
 information on how long to wait for socket actions at most before doing the
-timeout action: call the \fBcurl_multi_socket_action(3)\fP function with the
+timeout action: call the \fIcurl_multi_socket_action(3)\fP function with the
 \fBsockfd\fP argument set to CURL_SOCKET_TIMEOUT. You can also use the
 \fIcurl_multi_timeout(3)\fP function to poll the value at any given time, but
 for an event-based system using the callback is far better than relying on
@@ -78,7 +78,7 @@ The socket \fBcallback\fP function uses a prototype like this
                            void *socketp); /* private socket pointer,
                                               \fBNULL\fP if not
                                               previously assigned with
-                                              \fBcurl_multi_assign(3)\fP */
+                                              \fIcurl_multi_assign(3)\fP */
 
 .fi
 The callback MUST return 0.
diff --git a/docs/libcurl/curl_multi_timeout.3 b/docs/libcurl/curl_multi_timeout.3
index 6f9e818b2..71b2b320a 100644
--- a/docs/libcurl/curl_multi_timeout.3
+++ b/docs/libcurl/curl_multi_timeout.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -29,12 +29,12 @@ CURLMcode curl_multi_timeout(CURLM *multi_handle, long *timeout);
 .SH DESCRIPTION
 
 An application using the libcurl multi interface should call
-\fBcurl_multi_timeout(3)\fP to figure out how long it should wait for socket
+\fIcurl_multi_timeout(3)\fP to figure out how long it should wait for socket
 actions \- at most \- before proceeding.
 
 Proceeding means either doing the socket-style timeout action: call the
-\fBcurl_multi_socket_action(3)\fP function with the \fBsockfd\fP argument set
-to CURL_SOCKET_TIMEOUT, or call \fBcurl_multi_perform(3)\fP if you're using
+\fIcurl_multi_socket_action(3)\fP function with the \fBsockfd\fP argument set
+to CURL_SOCKET_TIMEOUT, or call \fIcurl_multi_perform(3)\fP if you're using
 the simpler and older multi interface approach.
 
 The timeout value returned in the long \fBtimeout\fP points to, is in number
@@ -68,9 +68,9 @@ select(maxfd+1, &fdread, &fdwrite, &fdexcep, &timeout);
 .SH "RETURN VALUE"
 The standard CURLMcode for multi interface error codes.
 .SH "TYPICAL USAGE"
-Call \fBcurl_multi_timeout(3)\fP, then wait for action on the sockets. You
-figure out which sockets to wait for by calling \fBcurl_multi_fdset(3)\fP or
-by a previous call to \fBcurl_multi_socket(3)\fP.
+Call \fIcurl_multi_timeout(3)\fP, then wait for action on the sockets. You
+figure out which sockets to wait for by calling \fIcurl_multi_fdset(3)\fP or
+by a previous call to \fIcurl_multi_socket(3)\fP.
 .SH AVAILABILITY
 This function was added in libcurl 7.15.4.
 .SH "SEE ALSO"
diff --git a/docs/libcurl/curl_slist_append.3 b/docs/libcurl/curl_slist_append.3
index 9015e0f61..fed802929 100644
--- a/docs/libcurl/curl_slist_append.3
+++ b/docs/libcurl/curl_slist_append.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2015, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -36,7 +36,7 @@ been appended when this function returns. curl_slist_append() copies the
 string.
 
 The list should be freed again (after usage) with
-\fBcurl_slist_free_all(3)\fP.
+\fIcurl_slist_free_all(3)\fP.
 .SH RETURN VALUE
 A null pointer is returned if anything went wrong, otherwise the new list
 pointer is returned.
diff --git a/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3 b/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3
index 8d8240272..553d40857 100644
--- a/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3
+++ b/docs/libcurl/opts/CURLOPT_CUSTOMREQUEST.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -30,7 +30,7 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_CUSTOMREQUEST, char *request);
 .SH DESCRIPTION
 Pass a pointer to a zero terminated string as parameter.
 
-When you change the request method by setting \fBCURLOPT_CUSTOMREQUEST(3)\fP
+When you change the request method by setting \fICURLOPT_CUSTOMREQUEST(3)\fP
 to something, you don't actually change how libcurl behaves or acts in regards
 to the particular request method, it will only change the actual string sent
 in the request.
diff --git a/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3 b/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3
index 7dff9ca89..a9ca19287 100644
--- a/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3
+++ b/docs/libcurl/opts/CURLOPT_LOGIN_OPTIONS.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -34,7 +34,7 @@ Pass a char * as parameter, which should be pointing to the zero terminated
 For more information about the login options please see RFC2384, RFC5092 and
 IETF draft draft-earhart-url-smtp-00.txt
 
-\fBCURLOPT_LOGIN_OPTIONS(3)\fP can be used to set protocol specific login
+\fICURLOPT_LOGIN_OPTIONS(3)\fP can be used to set protocol specific login
 options, such as the preferred authentication mechanism via "AUTH=NTLM" or
 "AUTH=*", and should be used in conjunction with the \fICURLOPT_USERNAME(3)\fP
 option.
diff --git a/docs/libcurl/opts/CURLOPT_PROXYTYPE.3 b/docs/libcurl/opts/CURLOPT_PROXYTYPE.3
index 2177c7cb2..d2d924257 100644
--- a/docs/libcurl/opts/CURLOPT_PROXYTYPE.3
+++ b/docs/libcurl/opts/CURLOPT_PROXYTYPE.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -33,7 +33,7 @@ this are \fICURLPROXY_HTTP\fP, \fICURLPROXY_HTTP_1_0\fP
 \fICURLPROXY_SOCKS4\fP, \fICURLPROXY_SOCKS5\fP, \fICURLPROXY_SOCKS4A\fP and
 \fICURLPROXY_SOCKS5_HOSTNAME\fP. The HTTP type is default.
 
-If you set \fBCURLOPT_PROXYTYPE(3)\fP to \fICURLPROXY_HTTP_1_0\fP, it will
+If you set \fICURLOPT_PROXYTYPE(3)\fP to \fICURLPROXY_HTTP_1_0\fP, it will
 only affect how libcurl speaks to a proxy when CONNECT is used. The HTTP
 version used for "regular" HTTP requests is instead controlled with
 \fICURLOPT_HTTP_VERSION(3)\fP.
diff --git a/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3 b/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3
index 592bd040e..0d7a241fb 100644
--- a/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3
+++ b/docs/libcurl/opts/CURLOPT_PROXYUSERNAME.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -33,7 +33,7 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_PROXYUSERNAME,
 Pass a char * as parameter, which should be pointing to the zero terminated
 user name to use for the transfer.
 
-\fBCURLOPT_PROXYUSERNAME(3)\fP sets the user name to be used in protocol
+\fICURLOPT_PROXYUSERNAME(3)\fP sets the user name to be used in protocol
 authentication with the proxy.
 
 To specify the proxy password use the \fICURLOPT_PROXYPASSWORD(3)\fP.
diff --git a/docs/libcurl/opts/CURLOPT_TRANSFER_ENCODING.3 b/docs/libcurl/opts/CURLOPT_TRANSFER_ENCODING.3
index 132b9144f..242da13f0 100644
--- a/docs/libcurl/opts/CURLOPT_TRANSFER_ENCODING.3
+++ b/docs/libcurl/opts/CURLOPT_TRANSFER_ENCODING.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -36,7 +36,7 @@ HTTP response sent using a compressed Transfer-Encoding that will be
 automatically uncompressed by libcurl on reception.
 
 Transfer-Encoding differs slightly from the Content-Encoding you ask for with
-\fBCURLOPT_ACCEPT_ENCODING(3)\fP in that a Transfer-Encoding is strictly meant
+\fICURLOPT_ACCEPT_ENCODING(3)\fP in that a Transfer-Encoding is strictly meant
 to be for the transfer and thus MUST be decoded before the data arrives in the
 client. Traditionally, Transfer-Encoding has been much less used and supported
 by both HTTP clients and HTTP servers.
diff --git a/docs/libcurl/opts/CURLOPT_USERNAME.3 b/docs/libcurl/opts/CURLOPT_USERNAME.3
index a5ebb0e3a..ec6001078 100644
--- a/docs/libcurl/opts/CURLOPT_USERNAME.3
+++ b/docs/libcurl/opts/CURLOPT_USERNAME.3
@@ -5,7 +5,7 @@
 .\" *                            | (__| |_| |  _ <| |___
 .\" *                             \___|\___/|_| \_\_____|
 .\" *
-.\" * Copyright (C) 1998 - 2014, Daniel Stenberg, <daniel@haxx.se>, et al.
+.\" * Copyright (C) 1998 - 2016, Daniel Stenberg, <daniel@haxx.se>, et al.
 .\" *
 .\" * This software is licensed as described in the file COPYING, which
 .\" * you should have received as part of this distribution. The terms
@@ -33,7 +33,7 @@ CURLcode curl_easy_setopt(CURL *handle, CURLOPT_USERNAME,
 Pass a char * as parameter, which should be pointing to the zero terminated
 user name to use for the transfer.
 
-\fBCURLOPT_USERNAME(3)\fP sets the user name to be used in protocol
+\fICURLOPT_USERNAME(3)\fP sets the user name to be used in protocol
 authentication. You should not use this option together with the (older)
 \fICURLOPT_USERPWD(3)\fP option.