Initial revision

6 files changed, 641 insertions, 0 deletions

diff --git a/include/README b/include/README
new file mode 100644
index 000000000..fc9ea9137
--- /dev/null
+++ b/include/README
@@ -0,0 +1,15 @@
+                                  _   _ ____  _     
+                              ___| | | |  _ \| |    
+                             / __| | | | |_) | |    
+                            | (__| |_| |  _ <| |___ 
+                             \___|\___/|_| \_\_____|
+
+Include files for libcurl, external users.
+
+They're all placed in the curl subdirectory here for better fit in any kind
+of environment. You should include files from here using...
+
+        #include <curl/curl.h>
+
+... style and point the compiler's include path to the directory holding the
+curl subdirectory. It makes it more likely to survice future modifications.
diff --git a/include/curl/curl.beos-patch b/include/curl/curl.beos-patch
new file mode 100644
index 000000000..67bab368e
--- /dev/null
+++ b/include/curl/curl.beos-patch
@@ -0,0 +1,46 @@
+Index: include/curl/curl.h
+===================================================================
+RCS file: /cvs/curl/curl/include/curl/curl.h,v
+retrieving revision 1.5
+diff -u -r1.5 curl.h
+--- curl.h	1999/11/23 08:22:42	1.5
++++ curl.h	1999/11/24 16:19:11
+@@ -365,9 +365,13 @@
+   TIMECOND_LAST
+ } TimeCond;
+ 
++#ifdef __BEOS__
++#include <support/SupportDefs.h>
++#else
+ #ifndef __cplusplus        /* (rabe) */
+ typedef char bool;
+ #endif                     /* (rabe) */
++#endif
+ 
+ /**********************************************************************
+  *
+Index: include/curl/setup.h
+===================================================================
+RCS file: /cvs/curl/curl/include/curl/setup.h,v
+retrieving revision 1.2
+diff -u -r1.2 setup.h
+--- setup.h	1999/10/17 11:18:34	1.2
++++ setup.h	1999/11/24 16:19:11
+@@ -139,10 +139,17 @@
+ #define DOT_CHAR      "_"
+ 
+ #else
++#ifdef __BEOS__
++#define sclose(x) closesocket(x)
++#define sread(x,y,z) recv(x,y,z,0)
++#define swrite(x,y,z) send(x,y,z,0)
++#define myalarm(x) alarm(x)
++#else
+ #define sclose(x) close(x)
+ #define sread(x,y,z) read(x,y,z)
+ #define swrite(x,y,z) write(x,y,z)
+ #define myalarm(x) alarm(x)
++#endif
+ 
+ #define PATH_CHAR     ":"
+ #define DIR_CHAR      "/"
diff --git a/include/curl/curl.h b/include/curl/curl.h
new file mode 100644
index 000000000..a74625dbd
--- /dev/null
+++ b/include/curl/curl.h
@@ -0,0 +1,434 @@
+#ifndef __URL_H
+#define __URL_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ *  The contents of this file are subject to the Mozilla Public License
+ *  Version 1.0 (the "License"); you may not use this file except in
+ *  compliance with the License. You may obtain a copy of the License at
+ *  http://www.mozilla.org/MPL/
+ *
+ *  Software distributed under the License is distributed on an "AS IS"
+ *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing rights and limitations
+ *  under the License.
+ *
+ *  The Original Code is Curl.
+ *
+ *  The Initial Developer of the Original Code is Daniel Stenberg.
+ *
+ *  Portions created by the Initial Developer are Copyright (C) 1998.
+ *  All Rights Reserved.
+ *
+ * ------------------------------------------------------------
+ * Main author:
+ * - Daniel Stenberg <Daniel.Stenberg@haxx.nu>
+ *
+ * 	http://curl.haxx.nu
+ *
+ * $Source$
+ * $Revision$
+ * $Date$
+ * $Author$
+ * $State$
+ * $Locker$
+ *
+ * ------------------------------------------------------------
+ ****************************************************************************/
+#ifndef TRUE
+#define TRUE 1
+#endif
+#ifndef FALSE
+#define FALSE 0
+#endif
+
+
+#define CONF_DEFAULT 0
+#define CONF_PROXY   (1<<0) /* set if proxy is in use */
+#define CONF_PORT    (1<<1) /* set if different port than protcol-defines is
+                               used */
+#define CONF_HTTP    (1<<2) /* http get */
+#define CONF_GOPHER  (1<<3) /* gopher get */
+#define CONF_FTP     (1<<4) /* ftp get (binary mode) */
+#define CONF_VERBOSE (1<<5) /* talk a lot */
+
+#define CONF_TELNET  (1<<6)
+
+#define CONF_HEADER  (1<<8) /* throw the header out too */
+#define CONF_USERPWD (1<<9) /* user+passwd has been specified */
+#define CONF_NOPROGRESS (1<<10) /* shut off the progress meter (auto)
+                                   see also _MUTE */
+#define CONF_NOBODY  (1<<11) /* use HEAD to get http document */
+#define CONF_FAILONERROR (1<<12) /* Makes urlget() fail with a return code
+                                    WITHOUT writing anything to the output if
+                                    a return code >=300 is returned from the
+                                    server. */
+#define CONF_RANGE (1<<13) /* Byte-range request, specified parameter is set */
+#define CONF_UPLOAD (1<<14) /* this is an upload, only supported for ftp
+                               currently */
+
+#define CONF_POST (1<<15) /* HTTP POST method */
+
+/* When getting an FTP directory, this switch makes the listing only show file
+   names and nothing else. Makes machine parsing of the output possible. This
+   enforces the NLST command to the ftp server, compared to the otherwise
+   used: LIST. */
+#define CONF_FTPLISTONLY (1<<16)
+
+/* Set the referer string */
+#define CONF_REFERER (1<<17)
+#define CONF_PROXYUSERPWD (1<<18) /* Proxy user+passwd has been specified */
+
+/* For FTP, use PORT instead of PASV! */
+#define CONF_FTPPORT (1<<19)
+
+/* FTP: Append instead of overwrite on upload! */
+#define CONF_FTPAPPEND (1<<20)
+
+#define CONF_HTTPS (1<<21)  /* Use SSLeay for encrypted communication */
+
+#define CONF_NETRC (1<<22)  /* read user+password from .netrc */
+
+#define CONF_FOLLOWLOCATION (1<<23) /* get the page that the Location: tells
+				       us to get */
+
+#define CONF_FTPASCII (1<<24) /* use TYPE A for transfer */
+
+#define CONF_HTTPPOST (1<<25) /* this causes a multipart/form-data
+				 HTTP POST */
+#define CONF_NOPROT   (1<<26) /* host name specified without protocol */
+
+#define CONF_PUT      (1<<27) /* PUT the input file */
+
+#define CONF_MUTE     (1<<28) /* force NOPROGRESS */
+
+#define CONF_DICT     (1<<29) /* DICT:// protocol */
+
+#define CONF_FILE     (1<<30) /* FILE:// protocol */
+
+#define CONF_LDAP     (1<<31) /* LDAP:// protocol */
+
+#ifdef MULTIDOC
+struct MoreDoc {
+  struct MoreDoc *next; /* next entry in the list */
+  char *path; /* pointer to allocated path */
+  FILE *store; /* where to put the doc */
+};
+#endif
+
+struct HttpHeader {
+  struct HttpHeader *next; /* next entry in the list */
+  char *header; /* pointer to allocated line without newline */
+};
+
+struct HttpPost {
+  struct HttpPost *next; /* next entry in the list */
+  char *name;     /* pointer to allocated name */
+  char *contents; /* pointer to allocated data contents */
+  char *contenttype; /* Content-Type */
+  struct HttpPost *more; /* if one field name has more than one file, this
+			    link should link to following files */
+  long flags;     /* as defined below */
+#define HTTPPOST_FILENAME (1<<0) /* specified content is a file name */
+};
+
+
+/* All possible error codes from this version of urlget(). Future versions
+   may return other values, stay prepared. */
+
+typedef enum {
+  URG_OK = 0,
+  URG_UNSUPPORTED_PROTOCOL,
+  URG_FAILED_INIT,
+  URG_URL_MALFORMAT,
+  URG_URL_MALFORMAT_USER,
+  URG_COULDNT_RESOLVE_PROXY,
+  URG_COULDNT_RESOLVE_HOST,
+  URG_COULDNT_CONNECT,
+  URG_FTP_WEIRD_SERVER_REPLY,
+  URG_FTP_ACCESS_DENIED,
+  URG_FTP_USER_PASSWORD_INCORRECT,
+  URG_FTP_WEIRD_PASS_REPLY,
+  URG_FTP_WEIRD_USER_REPLY,
+  URG_FTP_WEIRD_PASV_REPLY,
+  URG_FTP_WEIRD_227_FORMAT,
+  URG_FTP_CANT_GET_HOST,
+  URG_FTP_CANT_RECONNECT,
+  URG_FTP_COULDNT_SET_BINARY,
+  URG_PARTIAL_FILE,
+  URG_FTP_COULDNT_RETR_FILE,
+  URG_FTP_WRITE_ERROR,
+  URG_FTP_QUOTE_ERROR,
+  URG_HTTP_NOT_FOUND,
+  URG_WRITE_ERROR,
+
+  URG_MALFORMAT_USER, /* the user name is illegally specified */
+  URG_FTP_COULDNT_STOR_FILE, /* failed FTP upload */
+  URG_READ_ERROR, /* could open/read from file */
+
+  URG_OUT_OF_MEMORY,
+  URG_OPERATION_TIMEOUTED, /* the timeout time was reached */
+  URG_FTP_COULDNT_SET_ASCII, /* TYPE A failed */
+
+  URG_FTP_PORT_FAILED, /* FTP PORT operation failed */
+
+  URG_FTP_COULDNT_USE_REST, /* the REST command failed */
+  URG_FTP_COULDNT_GET_SIZE, /* the SIZE command failed */
+
+  URG_HTTP_RANGE_ERROR, /* The RANGE "command" didn't seem to work */
+
+  URG_HTTP_POST_ERROR,
+
+  URG_SSL_CONNECT_ERROR, /* something was wrong when connecting with SSL */
+
+  URG_FTP_BAD_DOWNLOAD_RESUME, /* couldn't resume download */
+
+  URG_FILE_COULDNT_READ_FILE,
+
+  URG_LDAP_CANNOT_BIND,
+  URG_LDAP_SEARCH_FAILED,
+  URG_LIBRARY_NOT_FOUND,
+  URG_FUNCTION_NOT_FOUND,
+
+  URL_LAST
+} UrgError;
+
+/* This is just to make older programs not break: */
+#define URG_FTP_PARTIAL_FILE URG_PARTIAL_FILE
+
+#define URGTAG_DONE -1
+#define URGTAG_LAST -1
+#define URGTAG_END -1
+
+#define URLGET_ERROR_SIZE 256
+
+/* maximum URL length we deal with */
+#define URL_MAX_LENGTH 4096 
+#define URL_MAX_LENGTH_TXT "4095"
+
+/* name is uppercase URGTAG_<name>,
+   type is one of the defined URGTYPE_<type>
+   number is unique identifier */
+#define T(name,type,number) URGTAG_ ## name = URGTYPE_ ## type + number
+
+/* long may be 32 or 64 bits, but we should never depend on anything else
+   but 32 */
+#define URGTYPE_LONG          0
+#define URGTYPE_OBJECTPOINT   10000
+#define URGTYPE_FUNCTIONPOINT 20000
+
+typedef enum {
+  URGTAG_NOTHING, /* the first unused */
+  
+  /* This is the FILE * the regular output should be written to. */
+  T(FILE, OBJECTPOINT, 1),
+
+  /* The full URL to get/put */
+  T(URL,  OBJECTPOINT, 2),
+
+  /* Port number to connect to, if other than default. Specify the CONF_PORT
+     flag in the URGTAG_FLAGS to activate this */
+  T(PORT, LONG, 3),
+
+  /* Name of proxy to use. Specify the CONF_PROXY flag in the URGTAG_FLAGS to
+     activate this */
+  T(PROXY, OBJECTPOINT, 4),
+  
+  /* Name and password to use when fetching. Specify the CONF_USERPWD flag in
+     the URGTAG_FLAGS to activate this */
+  T(USERPWD, OBJECTPOINT, 5),
+
+  /* Name and password to use with Proxy. Specify the CONF_PROXYUSERPWD 
+     flag in the URGTAG_FLAGS to activate this */
+  T(PROXYUSERPWD, OBJECTPOINT, 6),
+
+  /* Range to get, specified as an ASCII string. Specify the CONF_RANGE flag
+     in the URGTAG_FLAGS to activate this */
+  T(RANGE, OBJECTPOINT, 7),
+
+  /* Configuration flags */
+  T(FLAGS, LONG, 8),
+
+  /* Specified file stream to upload from (use as input): */
+  T(INFILE, OBJECTPOINT, 9),
+
+  /* Buffer to receive error messages in, must be at least URLGET_ERROR_SIZE
+     bytes big. If this is not used, error messages go to stderr instead: */
+  T(ERRORBUFFER, OBJECTPOINT, 10),
+
+  /* Function that will be called to store the output (instead of fwrite). The
+     parameters will use fwrite() syntax, make sure to follow them. */
+  T(WRITEFUNCTION, FUNCTIONPOINT, 11),
+
+  /* Function that will be called to read the input (instead of fread). The
+     parameters will use fread() syntax, make sure to follow them. */
+  T(READFUNCTION, FUNCTIONPOINT, 12),
+
+  /* Time-out the read operation after this amount of seconds */
+  T(TIMEOUT, LONG, 13),
+
+  /* If the URGTAG_INFILE is used, this can be used to inform urlget about how
+     large the file being sent really is. That allows better error checking
+     and better verifies that the upload was succcessful. -1 means unknown
+     size. */
+  T(INFILESIZE, LONG, 14),
+
+  /* POST input fields. */
+  T(POSTFIELDS, OBJECTPOINT, 15),
+
+  /* Set the referer page (needed by some CGIs) */
+  T(REFERER, OBJECTPOINT, 16),
+
+  /* Set the FTP PORT string (interface name, named or numerical IP address)
+     Use i.e '-' to use default address. */
+  T(FTPPORT, OBJECTPOINT, 17),
+
+  /* Set the User-Agent string (examined by some CGIs) */
+  T(USERAGENT, OBJECTPOINT, 18),
+
+  /* If the download receives less than "low speed limit" bytes/second
+   * during "low speed time" seconds, the operations is aborted.
+   * You could i.e if you have a pretty high speed connection, abort if
+   * it is less than 2000 bytes/sec during 20 seconds.   
+   */
+
+  /* Set the "low speed limit" */
+  T(LOW_SPEED_LIMIT, LONG , 19),
+
+  /* Set the "low speed time" */
+  T(LOW_SPEED_TIME, LONG, 20),
+
+  /* Set the continuation offset */
+  T(RESUME_FROM, LONG, 21),
+
+  /* Set cookie in request: */
+  T(COOKIE, OBJECTPOINT, 22),
+
+  /* This points to a linked list of headers, struct HttpHeader kind */
+  T(HTTPHEADER, OBJECTPOINT, 23),
+
+  /* This points to a linked list of post entries, struct HttpPost */
+  T(HTTPPOST, OBJECTPOINT, 24),
+
+  /* name of the file keeping your private SSL-certificate */
+  T(SSLCERT, OBJECTPOINT, 25),
+
+  /* password for the SSL-certificate */
+  T(SSLCERTPASSWD, OBJECTPOINT, 26),
+  
+  /* send TYPE parameter? */
+  T(CRLF, LONG, 27),
+
+  /* send linked-list of QUOTE commands */
+  T(QUOTE, OBJECTPOINT, 28),
+
+  /* send FILE * to store headers to */
+  T(WRITEHEADER, OBJECTPOINT, 29),
+
+#ifdef MULTIDOC
+  /* send linked list of MoreDoc structs */
+  T(MOREDOCS, OBJECTPOINT, 30),
+#endif
+
+  /* point to a file to read the initial cookies from, also enables
+     "cookie awareness" */
+  T(COOKIEFILE, OBJECTPOINT, 31),
+
+  /* What version to specifly try to use.
+     3 = SSLv3, 2 = SSLv2, all else makes it try v3 first then v2 */
+  T(SSLVERSION, LONG, 32),
+
+  /* What kind of HTTP time condition to use, see defines */
+  T(TIMECONDITION, LONG, 33),
+
+  /* Time to use with the above condition. Specified in number of seconds
+     since 1 Jan 1970 */
+  T(TIMEVALUE, LONG, 34),
+
+  /* HTTP request, for odd commands like DELETE, TRACE and others */
+  /* OBSOLETE DEFINE, left for tradition only */
+  T(HTTPREQUEST, OBJECTPOINT, 35),
+
+  /* Custom request, for customizing the get command like
+     HTTP: DELETE, TRACE and others
+     FTP: to use a different list command
+     */
+  T(CUSTOMREQUEST, OBJECTPOINT, 35),
+
+  /* HTTP request, for odd commands like DELETE, TRACE and others */
+  T(STDERR, OBJECTPOINT, 36),
+
+  /* Progress mode sets alternative progress mode displays, the only
+     one defined today is 1 which makes the #-style progress bar. */
+  T(PROGRESSMODE, LONG, 37),
+
+  URGTAG_LASTENTRY /* the last unusued */
+} UrgTag;
+
+#define CURL_PROGRESS_STATS 0 /* default progress display */
+#define CURL_PROGRESS_BAR   1
+
+typedef enum {
+  TIMECOND_NONE,
+
+  TIMECOND_IFMODSINCE,
+  TIMECOND_IFUNMODSINCE,
+  TIMECOND_LASTMOD,
+
+  TIMECOND_LAST
+} TimeCond;
+
+#ifdef __BEOS__
+#include <support/SupportDefs.h>
+#else
+#ifndef __cplusplus        /* (rabe) */
+typedef char bool;
+#endif                     /* (rabe) */
+#endif
+
+/**********************************************************************
+ *
+ * >>> urlget() interface #defines changed in v5! <<<
+ *
+ * You enter parameters as tags. Tags are specified as a pair of parameters.
+ * The first parameter in a pair is the tag identifier, telling urlget what
+ * kind of tag it is, and the second is the data. The tags may come in any
+ * order but MUST ALWAYS BE TERMINATED with an ending URGTAG_DONE (which
+ * needs no data).
+ *
+ * _Very_ simple example:
+ *
+ * curl_urlget(URGTAG_URL, "http://www.fts.frontec.se/~dast/", URGTAG_DONE);
+ *
+ ***********************************************************************/
+
+UrgError curl_urlget(UrgTag, ...);
+
+/* external form function */
+int curl_FormParse(char *string,
+                   struct HttpPost **httppost,
+                   struct HttpPost **last_post);
+
+/* Unix and Win32 getenv function call */
+char *curl_GetEnv(char *variable);
+
+/* returns ascii string of the libcurl version */
+char *curl_version(void);
+
+/* This is the version number */
+#define LIBCURL_VERSION "6.3.1"
+
+/* linked-list structure for QUOTE */
+struct curl_slist {
+	char			*data;
+	struct curl_slist	*next;
+};
+
+struct curl_slist *curl_slist_append(struct curl_slist *list, char *data);
+void curl_slist_free_all(struct curl_slist *list);
+
+#endif /* __URLGET_H */
diff --git a/include/curl/getdate.h b/include/curl/getdate.h
new file mode 100644
index 000000000..e69de29bb
--- /dev/null
+++ b/include/curl/getdate.h
diff --git a/include/curl/mprintf.h b/include/curl/mprintf.h
new file mode 100644
index 000000000..65c64f439
--- /dev/null
+++ b/include/curl/mprintf.h
@@ -0,0 +1,93 @@
+/*************************************************************************
+ *
+ * $Id$
+ *
+ * The contents of this file are subject to the Mozilla Public License
+ * Version 1.0 (the "License"); you may not use this file except in
+ * compliance with the License. You may obtain a copy of the License at
+ * http://www.mozilla.org/MPL/ 
+ *
+ * Software distributed under the License is distributed on an "AS IS"
+ * basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See
+ * the License for the specific language governing rights and limitations
+ * under the License. 
+ *
+ * The Original Code is Triacle.
+ *
+ * The Initial Developers of the Original Code are Bjorn Reese and
+ * Daniel Stenberg.
+ *
+ * Portions created by Initial Developers are
+ *
+ *   Copyright (C) 1998 Bjorn Reese and Daniel Stenberg.
+ *   All Rights Reserved. 
+ *
+ * Contributor(s):
+ *
+ *************************************************************************
+ *
+ * Preliminary documentation
+ *
+ * printf conversions:
+ *
+ *  conversion ::= '%%' | '%' [position] ( number | float | string )
+ *  position ::= digits '$'
+ *  number ::= [number-flags] ( 'd' | 'i' | 'o' | 'x' | 'X' | 'u')
+ *  number-flags ::= 'h' | 'l' | 'L' ...
+ *  float ::= [float-flags] ( 'f' | 'e' | 'E' | 'g' | 'G' )
+ *  string ::= [string-flags] 's'
+ *  string-flags ::= padding | '#'
+ *  digits ::= (digit)+
+ *  digit ::= 0-9
+ *
+ *  c
+ *  p
+ *  n
+ *
+ * qualifiers
+ *
+ *  -     : left adjustment
+ *  +     : show sign
+ *  SPACE : padding
+ *  #     : alterative
+ *  .     : precision
+ *  *     : width
+ *  0     : padding / size
+ *  1-9   : size
+ *  h     : short
+ *  l     : long
+ *  ll    : longlong
+ *  L     : long double
+ *  Z     : long / longlong
+ *  q     : longlong
+ *
+ ************************************************************************/
+
+#ifndef H_MPRINTF
+#define H_MPRINTF
+
+#include <stdarg.h>
+
+int mprintf(const char *format, ...);
+int mfprintf(FILE *fd, const char *format, ...);
+int msprintf(char *buffer, const char *format, ...);
+int msnprintf(char *buffer, size_t maxlength, const char *format, ...);
+int mvprintf(const char *format, va_list args);
+int mvfprintf(FILE *fd, const char *format, va_list args);
+int mvsprintf(char *buffer, const char *format, va_list args);
+int mvsnprintf(char *buffer, size_t maxlength, const char *format, va_list args);
+char *maprintf(const char *format, ...);
+char *mvaprintf(const char *format, va_list args);
+
+#ifdef _MPRINTF_REPLACE
+# define printf mprintf
+# define fprintf mfprintf
+# define sprintf msprintf
+# define snprintf msnprintf
+# define vprintf mvprintf
+# define vfprintf mvfprintf
+# define vsprintf mvsprintf
+# define vsnprintf mvsnprintf
+#endif
+
+#endif /* H_MPRINTF */
diff --git a/include/curl/stdcheaders.h b/include/curl/stdcheaders.h
new file mode 100644
index 000000000..3027b86e9
--- /dev/null
+++ b/include/curl/stdcheaders.h
@@ -0,0 +1,53 @@
+#ifndef __STDC_HEADERS_H
+#define __STDC_HEADERS_H
+/*****************************************************************************
+ *                                  _   _ ____  _     
+ *  Project                     ___| | | |  _ \| |    
+ *                             / __| | | | |_) | |    
+ *                            | (__| |_| |  _ <| |___ 
+ *                             \___|\___/|_| \_\_____|
+ *
+ *  The contents of this file are subject to the Mozilla Public License
+ *  Version 1.0 (the "License"); you may not use this file except in
+ *  compliance with the License. You may obtain a copy of the License at
+ *  http://www.mozilla.org/MPL/
+ *
+ *  Software distributed under the License is distributed on an "AS IS"
+ *  basis, WITHOUT WARRANTY OF ANY KIND, either express or implied. See the
+ *  License for the specific language governing rights and limitations
+ *  under the License.
+ *
+ *  The Original Code is Curl.
+ *
+ *  The Initial Developer of the Original Code is Daniel Stenberg.
+ *
+ *  Portions created by the Initial Developer are Copyright (C) 1998.
+ *  All Rights Reserved.
+ *
+ * ------------------------------------------------------------
+ * Main author:
+ * - Daniel Stenberg <Daniel.Stenberg@haxx.nu>
+ *
+ * 	http://curl.haxx.nu
+ *
+ * $Source$
+ * $Revision$
+ * $Date$
+ * $Author$
+ * $State$
+ * $Locker$
+ *
+ * ------------------------------------------------------------
+ ****************************************************************************/
+
+#ifdef HAVE_SYS_TYPES_H
+#include <sys/types.h>
+#endif
+
+size_t fread (void *, size_t, size_t, FILE *);
+size_t fwrite (const void *, size_t, size_t, FILE *);
+
+int strcasecmp(const char *, const char *);
+int strncasecmp(const char *, const char *, size_t);
+
+#endif