aboutsummaryrefslogtreecommitdiff
diff options
context:
space:
mode:
-rw-r--r--CHANGES9
-rw-r--r--tests/data/DISABLED4
-rw-r--r--tests/data/Makefile.am3
-rw-r--r--tests/data/test106918
-rw-r--r--tests/data/test1071113
-rw-r--r--tests/data/test107278
-rw-r--r--tests/data/test107371
-rw-r--r--tests/data/test107476
-rw-r--r--tests/data/test107594
9 files changed, 453 insertions, 13 deletions
diff --git a/CHANGES b/CHANGES
index 8b7b52707..9fbc130fb 100644
--- a/CHANGES
+++ b/CHANGES
@@ -6,6 +6,15 @@
Changelog
+Daniel Fandrich (29 Aug 2008)
+- Added tests 1071 through 1074 to test automatic downgrading from HTTP 1.1
+ to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072
+ and 1073 are similar to test 1069 in that they involve the impossible
+ scenario of sending chunked data to a HTTP 1.0 server. All these fail
+ and are added to DISABLED.
+
+- Added test 1075 to test --anyauth with Basic authentication.
+
Daniel Stenberg (29 Aug 2008)
- When libcurl was doing a HTTP POST and the server would respond with
"Connection: close" and actually close the connection after the
diff --git a/tests/data/DISABLED b/tests/data/DISABLED
index 87d335550..dc68bd90f 100644
--- a/tests/data/DISABLED
+++ b/tests/data/DISABLED
@@ -4,3 +4,7 @@
# per line.
# Lines starting with '#' letters are treated as comments.
1069
+1071
+1072
+1073
+1074
diff --git a/tests/data/Makefile.am b/tests/data/Makefile.am
index 3cdfa631b..185d385e9 100644
--- a/tests/data/Makefile.am
+++ b/tests/data/Makefile.am
@@ -56,7 +56,8 @@ EXTRA_DIST = test1 test108 test117 test127 test20 test27 test34 test46 \
test1040 test1041 test1042 test1043 test1044 test1045 test1046 test1047 \
test1048 test1049 test1050 test1051 test1052 test1053 test1054 test1055 \
test1056 test1057 test1058 test1059 test1060 test1061 test1062 test1063 \
- test1064 test1065 test1066 test1067 test1068 test1069 test1070
+ test1064 test1065 test1066 test1067 test1068 test1069 test1070 test1071 \
+ test1072 test1073 test1074 test1075
filecheck:
@mkdir test-place; \
diff --git a/tests/data/test1069 b/tests/data/test1069
index 11b2ce681..5b0b1fa47 100644
--- a/tests/data/test1069
+++ b/tests/data/test1069
@@ -3,13 +3,14 @@
<keywords>
HTTP
HTTP PUT
+HTTP/1.0
</keywords>
</info>
# Server-side
<reply>
<data>
-HTTP/1.0 200 OK swsclose
+HTTP/1.0 500 Impossible swsclose
Date: Thu, 09 Nov 2010 14:49:00 GMT
Server: test-server/fake
@@ -30,21 +31,14 @@ HTTP 1.0 PUT from stdin with no content length
http://%HOSTIP:%HTTPPORT/bzz/1069 -T - -0
</command>
<stdin>
-more than one byte
+this data can't be sent
</stdin>
</client>
# Verify data after the test has been "shot"
<verify>
-<strip>
-^User-Agent:.*
-</strip>
-<protocol>
-PUT /bzz/1069 HTTP/1.0
-Host: %HOSTIP:%HTTPPORT
-Accept: */*
-Content-Length: 0
-
-</protocol>
+<errorcode>
+25
+</errorcode>
</verify>
</testcase>
diff --git a/tests/data/test1071 b/tests/data/test1071
new file mode 100644
index 000000000..758457a04
--- /dev/null
+++ b/tests/data/test1071
@@ -0,0 +1,113 @@
+<testcase>
+# Authorization is used to force curl to realize that the server is
+# speaking HTTP 1.0. The request must be resent with the correct
+# authorization header, but using HTTP 1.0, not 1.1.
+<info>
+<keywords>
+HTTP
+HTTP PUT
+HTTP Digest auth
+--anyauth
+HTTP/1.0
+</keywords>
+</info>
+
+# Server-side
+<reply>
+<data>
+HTTP/1.0 401 Authorization Required swsclose
+Server: testcurl
+WWW-Authenticate: Blackmagic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Basic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Digest realm="gimme all yer s3cr3ts", nonce="11223344"
+Content-Type: text/plain
+Content-Length: 35
+Connection: close
+
+Try again on this HTTP 1.0 server!
+</data>
+
+# This is supposed to be returned when the server gets a
+# Authorization: Digest line passed-in from the client
+<data1000>
+HTTP/1.0 200 OK swsclose
+Server: testcurl
+Content-Type: text/plain
+Content-Length: 23
+Connection: close
+
+This IS the real page!
+</data1000>
+
+<datacheck>
+HTTP/1.0 401 Authorization Required swsclose
+Server: testcurl
+WWW-Authenticate: Blackmagic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Basic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Digest realm="gimme all yer s3cr3ts", nonce="11223344"
+Content-Type: text/plain
+Content-Length: 35
+Connection: close
+
+HTTP/1.0 200 OK swsclose
+Server: testcurl
+Content-Type: text/plain
+Content-Length: 23
+Connection: close
+
+This IS the real page!
+</datacheck>
+
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+<features>
+crypto
+</features>
+ <name>
+Downgraded HTTP PUT to HTTP 1.0 with authorization
+ </name>
+ <command>
+http://%HOSTIP:%HTTPPORT/1071 -T log/put1071 -u testuser:testpass --anyauth
+</command>
+<file name="log/put1071">
+This is data we upload with PUT
+a second line
+line three
+four is the number of lines
+</file>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+PUT /1071 HTTP/1.1
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+Content-Length: 85
+Expect: 100-continue
+
+This is data we upload with PUT
+a second line
+line three
+four is the number of lines
+PUT /1071 HTTP/1.0
+Authorization: Digest username="testuser", realm="gimme all yer s3cr3ts", nonce="11223344", uri="/1071", response="df4cef6b52a30e65d472dd848d2055a1"
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+Content-Length: 85
+
+This is data we upload with PUT
+a second line
+line three
+four is the number of lines
+</protocol>
+</verify>
+</testcase>
diff --git a/tests/data/test1072 b/tests/data/test1072
new file mode 100644
index 000000000..9a04224f4
--- /dev/null
+++ b/tests/data/test1072
@@ -0,0 +1,78 @@
+<testcase>
+# Authorization is used to force curl to realize that the server is
+# speaking HTTP 1.0. The request is impossible to satisfy with HTTP 1.0
+# because chunked encoding is unavailable, so the request must fail.
+<info>
+<keywords>
+HTTP
+HTTP PUT
+HTTP Digest auth
+--anyauth
+HTTP/1.0
+chunked Transfer-Encoding
+</keywords>
+</info>
+
+# Server-side
+<reply>
+<data>
+HTTP/1.0 401 Authorization Required swsclose
+Server: testcurl
+WWW-Authenticate: Blackmagic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Basic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Digest realm="gimme all yer s3cr3ts", nonce="11223344"
+Content-Type: text/plain
+Content-Length: 35
+Connection: close
+
+Try again on this HTTP 1.0 server!
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+<features>
+crypto
+</features>
+ <name>
+HTTP chunked PUT to HTTP 1.0 server with authorization
+ </name>
+ <command>
+http://%HOSTIP:%HTTPPORT/1072 -T - -u testuser:testpass --anyauth
+</command>
+<stdin>
+This is data we upload with PUT
+it comes from stdin so MUST be sent
+with chunked encoding
+which is impossible in HTTP/1.0
+</stdin>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+25
+</errorcode>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+PUT /1072 HTTP/1.1
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+Transfer-Encoding: chunked
+Expect: 100-continue
+
+7a
+This is data we upload with PUT
+it comes from stdin so MUST be sent
+with chunked encoding
+which is impossible in HTTP/1.0
+0
+
+</protocol>
+</verify>
+</testcase>
diff --git a/tests/data/test1073 b/tests/data/test1073
new file mode 100644
index 000000000..00e7feb0c
--- /dev/null
+++ b/tests/data/test1073
@@ -0,0 +1,71 @@
+<testcase>
+# Redirection is used to force curl to realize that the server is
+# speaking HTTP 1.0. The request is impossible to satisfy with HTTP 1.0
+# because chunked encoding is unavailable, so the request must fail.
+<info>
+<keywords>
+HTTP
+HTTP PUT
+HTTP/1.0
+followlocation
+chunked Transfer-Encoding
+</keywords>
+</info>
+
+# Server-side
+<reply>
+<data>
+HTTP/1.0 301 Authorization Required swsclose
+Server: testcurl
+Content-Type: text/plain
+Location: /newlocation/10730002
+Content-Length: 0
+Connection: close
+
+</data>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP chunked PUT to HTTP 1.0 server with redirect
+ </name>
+ <command>
+http://%HOSTIP:%HTTPPORT/1073 -T - -L
+</command>
+<stdin>
+This is data we upload with PUT
+it comes from stdin so MUST be sent
+with chunked encoding
+which is impossible in HTTP/1.0
+</stdin>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+<errorcode>
+25
+</errorcode>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+PUT /1073 HTTP/1.1
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+Transfer-Encoding: chunked
+Expect: 100-continue
+
+7a
+This is data we upload with PUT
+it comes from stdin so MUST be sent
+with chunked encoding
+which is impossible in HTTP/1.0
+0
+
+</protocol>
+</verify>
+</testcase>
diff --git a/tests/data/test1074 b/tests/data/test1074
new file mode 100644
index 000000000..bb710ce75
--- /dev/null
+++ b/tests/data/test1074
@@ -0,0 +1,76 @@
+<testcase>
+<info>
+<keywords>
+HTTP
+HTTP GET
+HTTP/1.0
+</keywords>
+</info>
+
+# Server-side
+<reply>
+<data nocheck="true">
+HTTP/1.0 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Content-Length: 9
+Connection: Keep-Alive
+
+surprise
+</data>
+<data1>
+HTTP/1.0 200 OK swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Connection: close
+
+surprise2
+</data1>
+
+<postcmd>
+wait 1
+</postcmd>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP downgrade to HTTP/1.0 on second request
+ </name>
+ <command>
+http://%HOSTIP:%HTTPPORT/want/1074 http://%HOSTIP:%HTTPPORT/wantmore/10740001
+</command>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+<stdout>
+HTTP/1.0 200 OK
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Content-Length: 9
+Connection: Keep-Alive
+
+surprise
+HTTP/1.0 200 OK swsclose
+Date: Thu, 09 Nov 2010 14:49:00 GMT
+Connection: close
+
+surprise2
+</stdout>
+
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+GET /want/1074 HTTP/1.1
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+
+GET /wantmore/10740001 HTTP/1.0
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+
+</protocol>
+</verify>
+</testcase>
diff --git a/tests/data/test1075 b/tests/data/test1075
new file mode 100644
index 000000000..5b8f186a0
--- /dev/null
+++ b/tests/data/test1075
@@ -0,0 +1,94 @@
+<testcase>
+<info>
+<keywords>
+HTTP
+HTTP PUT
+HTTP Basic auth
+--anyauth
+</keywords>
+</info>
+
+# Server-side
+<reply>
+# The test server provides no way to respond differently to a subsequent
+# Basic authenticated request (we really want to respond with 200 for
+# the second), so just respond with 401 for both and let curl deal with it.
+<data>
+HTTP/1.1 401 Authorization Required
+Server: testcurl
+WWW-Authenticate: Blackmagic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Basic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: X-bogus-auth realm="gimme all yer s3cr3ts"
+Content-Type: text/plain
+Content-Length: 0
+
+</data>
+<datacheck>
+HTTP/1.1 401 Authorization Required
+Server: testcurl
+WWW-Authenticate: Blackmagic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Basic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: X-bogus-auth realm="gimme all yer s3cr3ts"
+Content-Type: text/plain
+Content-Length: 0
+
+HTTP/1.1 401 Authorization Required
+Server: testcurl
+WWW-Authenticate: Blackmagic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: Basic realm="gimme all yer s3cr3ts"
+WWW-Authenticate: X-bogus-auth realm="gimme all yer s3cr3ts"
+Content-Type: text/plain
+Content-Length: 0
+
+</datacheck>
+</reply>
+
+# Client-side
+<client>
+<server>
+http
+</server>
+ <name>
+HTTP PUT with --anyauth authorization (picking Basic)
+ </name>
+ <command>
+http://%HOSTIP:%HTTPPORT/1075 -T log/put1075 -u testuser:testpass --anyauth
+</command>
+<file name="log/put1075">
+This is data we upload with PUT
+a second line
+line three
+four is the number of lines
+</file>
+</client>
+
+# Verify data after the test has been "shot"
+<verify>
+<strip>
+^User-Agent:.*
+</strip>
+<protocol>
+PUT /1075 HTTP/1.1
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+Content-Length: 85
+Expect: 100-continue
+
+This is data we upload with PUT
+a second line
+line three
+four is the number of lines
+PUT /1075 HTTP/1.1
+Authorization: Basic dGVzdHVzZXI6dGVzdHBhc3M=
+Host: %HOSTIP:%HTTPPORT
+Accept: */*
+Content-Length: 85
+Expect: 100-continue
+
+This is data we upload with PUT
+a second line
+line three
+four is the number of lines
+</protocol>
+</verify>
+</testcase>