diff options
Diffstat (limited to 'lib/smtp.c')
-rw-r--r-- | lib/smtp.c | 921 |
1 files changed, 921 insertions, 0 deletions
diff --git a/lib/smtp.c b/lib/smtp.c new file mode 100644 index 000000000..7f1b6fc18 --- /dev/null +++ b/lib/smtp.c @@ -0,0 +1,921 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2009, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + * RFC2821 SMTP protocol + * + * $Id$ + ***************************************************************************/ + +#include "setup.h" + +#ifndef CURL_DISABLE_SMTP +#include <stdio.h> +#include <string.h> +#include <stdlib.h> +#include <stdarg.h> +#include <ctype.h> + +#ifdef HAVE_UNISTD_H +#include <unistd.h> +#endif + +#ifdef HAVE_SYS_SOCKET_H +#include <sys/socket.h> +#endif +#ifdef HAVE_NETINET_IN_H +#include <netinet/in.h> +#endif +#ifdef HAVE_ARPA_INET_H +#include <arpa/inet.h> +#endif +#ifdef HAVE_UTSNAME_H +#include <sys/utsname.h> +#endif +#ifdef HAVE_NETDB_H +#include <netdb.h> +#endif +#ifdef VMS +#include <in.h> +#include <inet.h> +#endif + +#if (defined(NETWARE) && defined(__NOVELL_LIBC__)) +#undef in_addr_t +#define in_addr_t unsigned long +#endif + +#include <curl/curl.h> +#include "urldata.h" +#include "sendf.h" +#include "easyif.h" /* for Curl_convert_... prototypes */ + +#include "if2ip.h" +#include "hostip.h" +#include "progress.h" +#include "transfer.h" +#include "escape.h" +#include "http.h" /* for HTTP proxy tunnel stuff */ +#include "socks.h" +#include "smtp.h" + +#include "strtoofft.h" +#include "strequal.h" +#include "sslgen.h" +#include "connect.h" +#include "strerror.h" +#include "select.h" +#include "multiif.h" +#include "url.h" +#include "rawstr.h" +#include "strtoofft.h" + +#define _MPRINTF_REPLACE /* use our functions only */ +#include <curl/mprintf.h> + +#include "curl_memory.h" +/* The last #include file should be: */ +#include "memdebug.h" + +/* Local API functions */ +static CURLcode smtp_parse_url_path(struct connectdata *conn); +static CURLcode smtp_regular_transfer(struct connectdata *conn, bool *done); +static CURLcode smtp_do(struct connectdata *conn, bool *done); +static CURLcode smtp_done(struct connectdata *conn, + CURLcode, bool premature); +static CURLcode smtp_connect(struct connectdata *conn, bool *done); +static CURLcode smtp_disconnect(struct connectdata *conn); +static CURLcode smtp_multi_statemach(struct connectdata *conn, bool *done); +static int smtp_getsock(struct connectdata *conn, + curl_socket_t *socks, + int numsocks); +static CURLcode smtp_doing(struct connectdata *conn, + bool *dophase_done); +static CURLcode smtp_setup_connection(struct connectdata * conn); +static void smtp_respinit(struct connectdata *conn); + +/* + * SMTP protocol handler. + */ + +const struct Curl_handler Curl_handler_smtp = { + "SMTP", /* scheme */ + smtp_setup_connection, /* setup_connection */ + smtp_do, /* do_it */ + smtp_done, /* done */ + ZERO_NULL, /* do_more */ + smtp_connect, /* connect_it */ + smtp_multi_statemach, /* connecting */ + smtp_doing, /* doing */ + smtp_getsock, /* proto_getsock */ + smtp_getsock, /* doing_getsock */ + ZERO_NULL, /* perform_getsock */ + smtp_disconnect, /* disconnect */ + PORT_SMTP, /* defport */ + PROT_SMTP /* protocol */ +}; + + +#ifdef USE_SSL +/* + * SMTPS protocol handler. + */ + +const struct Curl_handler Curl_handler_smtps = { + "SMTPS", /* scheme */ + smtp_setup_connection, /* setup_connection */ + smtp_do, /* do_it */ + smtp_done, /* done */ + ZERO_NULL, /* do_more */ + smtp_connect, /* connect_it */ + smtp_multi_statemach, /* connecting */ + smtp_doing, /* doing */ + smtp_getsock, /* proto_getsock */ + smtp_getsock, /* doing_getsock */ + ZERO_NULL, /* perform_getsock */ + smtp_disconnect, /* disconnect */ + PORT_SMTPS, /* defport */ + PROT_SMTP | PROT_SMTPS | PROT_SSL /* protocol */ +}; +#endif + +#ifndef CURL_DISABLE_HTTP +/* + * HTTP-proxyed SMTP protocol handler. + */ + +const struct Curl_handler Curl_handler_smtp_proxy = { + "SMTP", /* scheme */ + ZERO_NULL, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + ZERO_NULL, /* connect_it */ + ZERO_NULL, /* connecting */ + ZERO_NULL, /* doing */ + ZERO_NULL, /* proto_getsock */ + ZERO_NULL, /* doing_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + PORT_SMTP, /* defport */ + PROT_HTTP /* protocol */ +}; + + +#ifdef USE_SSL +/* + * HTTP-proxyed SMTPS protocol handler. + */ + +const struct Curl_handler Curl_handler_smtps_proxy = { + "SMTPS", /* scheme */ + ZERO_NULL, /* setup_connection */ + Curl_http, /* do_it */ + Curl_http_done, /* done */ + ZERO_NULL, /* do_more */ + ZERO_NULL, /* connect_it */ + ZERO_NULL, /* connecting */ + ZERO_NULL, /* doing */ + ZERO_NULL, /* proto_getsock */ + ZERO_NULL, /* doing_getsock */ + ZERO_NULL, /* perform_getsock */ + ZERO_NULL, /* disconnect */ + PORT_SMTPS, /* defport */ + PROT_HTTP /* protocol */ +}; +#endif +#endif + + +/* fucntion that checks for an ending smtp status code at the start of the + given string */ +static int smtp_endofresp(struct pingpong *pp, int *resp) +{ + char *line = pp->linestart_resp; + size_t len = pp->nread_resp; + + if( (len >= 4) && (' ' == line[3]) && + ISDIGIT(line[0]) && ISDIGIT(line[1]) && ISDIGIT(line[2])) { + *resp=atoi(line); + return TRUE; + } + + return FALSE; /* nothing for us */ +} + +/* This is the ONLY way to change SMTP state! */ +static void state(struct connectdata *conn, + smtpstate newstate) +{ +#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) + /* for debug purposes */ + static const char * const names[]={ + "STOP", + "SERVERGREET", + "EHLO", + "STARTTLS", + "MAIL", + "RCPT", + "DATA", + "QUIT", + /* LAST */ + }; +#endif + struct smtp_conn *smtpc = &conn->proto.smtpc; +#if defined(DEBUGBUILD) && !defined(CURL_DISABLE_VERBOSE_STRINGS) + if(smtpc->state != newstate) + infof(conn->data, "SMTP %p state change from %s to %s\n", + smtpc, names[smtpc->state], names[newstate]); +#endif + smtpc->state = newstate; +} + +static CURLcode smtp_state_ehlo(struct connectdata *conn) +{ + CURLcode result; + struct FTP *smtp = conn->data->state.proto.smtp; + + /* send EHLO */ + result = Curl_pp_sendf(&conn->proto.smtpc.pp, "EHLO %s", + smtp->user?smtp->user:""); + if(result) + return result; + + state(conn, SMTP_EHLO); + + return CURLE_OK; +} + +/* For the SMTP "protocol connect" and "doing" phases only */ +static int smtp_getsock(struct connectdata *conn, + curl_socket_t *socks, + int numsocks) +{ + return Curl_pp_getsock(&conn->proto.smtpc.pp, socks, numsocks); +} + +/* for STARTTLS responses */ +static CURLcode smtp_state_starttls_resp(struct connectdata *conn, + int smtpcode, + smtpstate instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + (void)instate; /* no use for this yet */ + + if(smtpcode != 'O') { + failf(data, "STARTTLS denied. %c", smtpcode); + result = CURLE_LOGIN_DENIED; + } + else { + /* Curl_ssl_connect is BLOCKING */ + result = Curl_ssl_connect(conn, FIRSTSOCKET); + if(CURLE_OK == result) { + conn->protocol |= PROT_SMTPS; + result = smtp_state_ehlo(conn); + } + } + state(conn, SMTP_STOP); + return result; +} + +/* for EHLO responses */ +static CURLcode smtp_state_ehlo_resp(struct connectdata *conn, + int smtpcode, + smtpstate instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + + (void)instate; /* no use for this yet */ + + if(smtpcode/100 != 2) { + failf(data, "Access denied: %d", smtpcode); + result = CURLE_LOGIN_DENIED; + } + + /* end the connect phase */ + state(conn, SMTP_STOP); + return result; +} + +/* start the DO phase */ +static CURLcode smtp_mail(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct FTP *smtp = data->state.proto.smtp; + + /* send MAIL */ + result = Curl_pp_sendf(&conn->proto.smtpc.pp, "MAIL FROM:<%s>", + data->set.str[STRING_MAIL_FROM]); + if(result) + return result; + + state(conn, SMTP_MAIL); + return result; +} + +/* for MAIL responses */ +static CURLcode smtp_state_mail_resp(struct connectdata *conn, + int smtpcode, + smtpstate instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + (void)instate; /* no use for this yet */ + + if(smtpcode/100 != 2) { + failf(data, "Access denied: %d", smtpcode); + result = CURLE_LOGIN_DENIED; + state(conn, SMTP_STOP); + } + else { + /* send RCPT TO */ + result = Curl_pp_sendf(&conn->proto.smtpc.pp, "RCPT TO:<%s>", + data->set.str[STRING_MAIL_RCPT]); + if(result) + return result; + + state(conn, SMTP_RCPT); + } + return result; +} + +/* for RCPT responses */ +static CURLcode smtp_state_rcpt_resp(struct connectdata *conn, + int smtpcode, + smtpstate instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + (void)instate; /* no use for this yet */ + + if(smtpcode/100 != 2) { + failf(data, "Access denied: %d", smtpcode); + result = CURLE_LOGIN_DENIED; + state(conn, SMTP_STOP); + } + else { + /* send DATA */ + result = Curl_pp_sendf(&conn->proto.smtpc.pp, "DATA", ""); + if(result) + return result; + + state(conn, SMTP_DATA); + } + return result; +} + +/* for the DATA response */ +static CURLcode smtp_state_data_resp(struct connectdata *conn, + int smtpcode, + smtpstate instate) +{ + CURLcode result = CURLE_OK; + struct SessionHandle *data = conn->data; + struct FTP *smtp = data->state.proto.smtp; + + (void)instate; /* no use for this yet */ + + if(smtpcode/100 != 2) { + state(conn, SMTP_STOP); + return CURLE_RECV_ERROR; + } + + /* SMTP upload */ + result=Curl_setup_transfer(conn, FIRSTSOCKET, -1, FALSE, + smtp->bytecountp, + -1, NULL); /* no upload here */ + + state(conn, SMTP_STOP); + return result; +} + +static CURLcode smtp_statemach_act(struct connectdata *conn) +{ + CURLcode result; + curl_socket_t sock = conn->sock[FIRSTSOCKET]; + struct SessionHandle *data=conn->data; + int smtpcode; + struct smtp_conn *smtpc = &conn->proto.smtpc; + struct pingpong *pp = &smtpc->pp; + size_t nread = 0; + + if(pp->sendleft) + /* we have a piece of a command still left to send */ + return Curl_pp_flushsend(pp); + + /* we read a piece of response */ + result = Curl_pp_readresp(sock, pp, &smtpcode, &nread); + if(result) + return result; + + if(smtpcode) { + /* we have now received a full SMTP server response */ + switch(smtpc->state) { + case SMTP_SERVERGREET: + if(smtpcode/100 != 2) { + failf(data, "Got unexpected smtp-server response: %d", smtpcode); + return CURLE_FTP_WEIRD_SERVER_REPLY; + } + + if(data->set.ftp_ssl && !conn->ssl[FIRSTSOCKET].use) { + /* We don't have a SSL/TLS connection yet, but SSL is requested. Switch + to TLS connection now */ + const char *str; + + result = Curl_pp_sendf(&smtpc->pp, "STARTTLS", str); + state(conn, SMTP_STARTTLS); + } + else + result = smtp_state_ehlo(conn); + if(result) + return result; + break; + + case SMTP_EHLO: + result = smtp_state_ehlo_resp(conn, smtpcode, smtpc->state); + break; + + case SMTP_MAIL: + result = smtp_state_mail_resp(conn, smtpcode, smtpc->state); + break; + + case SMTP_RCPT: + result = smtp_state_rcpt_resp(conn, smtpcode, smtpc->state); + break; + + case SMTP_STARTTLS: + result = smtp_state_starttls_resp(conn, smtpcode, smtpc->state); + break; + + case SMTP_DATA: + result = smtp_state_data_resp(conn, smtpcode, smtpc->state); + break; + + case SMTP_QUIT: + /* fallthrough, just stop! */ + default: + /* internal error */ + state(conn, SMTP_STOP); + break; + } + } + return result; +} + +/* called repeatedly until done from multi.c */ +static CURLcode smtp_multi_statemach(struct connectdata *conn, + bool *done) +{ + struct smtp_conn *smtpc = &conn->proto.smtpc; + CURLcode result = Curl_pp_multi_statemach(&smtpc->pp); + + *done = (bool)(smtpc->state == SMTP_STOP); + + return result; +} + +static CURLcode smtp_easy_statemach(struct connectdata *conn) +{ + struct smtp_conn *smtpc = &conn->proto.smtpc; + struct pingpong *pp = &smtpc->pp; + CURLcode result = CURLE_OK; + + while(smtpc->state != SMTP_STOP) { + result = Curl_pp_easy_statemach(pp); + if(result) + break; + } + + return result; +} + +/* + * Allocate and initialize the struct SMTP for the current SessionHandle. If + * need be. + */ +static CURLcode smtp_init(struct connectdata *conn) +{ + struct SessionHandle *data = conn->data; + struct FTP *smtp = data->state.proto.smtp; + if(!smtp) { + smtp = data->state.proto.smtp = calloc(sizeof(struct FTP), 1); + if(!smtp) + return CURLE_OUT_OF_MEMORY; + } + + /* get some initial data into the smtp struct */ + smtp->bytecountp = &data->req.bytecount; + + /* No need to duplicate user+password, the connectdata struct won't change + during a session, but we re-init them here since on subsequent inits + since the conn struct may have changed or been replaced. + */ + smtp->user = conn->user; + smtp->passwd = conn->passwd; + + return CURLE_OK; +} + +/* + * smtp_connect() should do everything that is to be considered a part of + * the connection phase. + * + * The variable 'done' points to will be TRUE if the protocol-layer connect + * phase is done when this function returns, or FALSE is not. When called as + * a part of the easy interface, it will always be TRUE. + */ +static CURLcode smtp_connect(struct connectdata *conn, + bool *done) /* see description above */ +{ + CURLcode result; + struct smtp_conn *smtpc = &conn->proto.smtpc; + struct SessionHandle *data=conn->data; + struct pingpong *pp=&smtpc->pp; + + *done = FALSE; /* default to not done yet */ + + /* If there already is a protocol-specific struct allocated for this + sessionhandle, deal with it */ + Curl_reset_reqproto(conn); + + result = smtp_init(conn); + if(CURLE_OK != result) + return result; + + /* We always support persistant connections on smtp */ + conn->bits.close = FALSE; + + pp->response_time = RESP_TIMEOUT; /* set default response time-out */ + pp->statemach_act = smtp_statemach_act; + pp->endofresp = smtp_endofresp; + pp->conn = conn; + +#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_PROXY) + if(conn->bits.tunnel_proxy && conn->bits.httpproxy) { + /* for SMTP over HTTP proxy */ + struct HTTP http_proxy; + struct FTP *smtp_save; + + /* BLOCKING */ + /* We want "seamless" SMTP operations through HTTP proxy tunnel */ + + /* Curl_proxyCONNECT is based on a pointer to a struct HTTP at the member + * conn->proto.http; we want SMTP through HTTP and we have to change the + * member temporarily for connecting to the HTTP proxy. After + * Curl_proxyCONNECT we have to set back the member to the original struct + * SMTP pointer + */ + smtp_save = data->state.proto.smtp; + memset(&http_proxy, 0, sizeof(http_proxy)); + data->state.proto.http = &http_proxy; + + result = Curl_proxyCONNECT(conn, FIRSTSOCKET, + conn->host.name, conn->remote_port); + + data->state.proto.smtp = smtp_save; + + if(CURLE_OK != result) + return result; + } +#endif /* !CURL_DISABLE_HTTP && !CURL_DISABLE_PROXY */ + + if(conn->protocol & PROT_SMTPS) { + /* BLOCKING */ + /* SMTPS is simply smtp with SSL for the control channel */ + /* now, perform the SSL initialization for this socket */ + result = Curl_ssl_connect(conn, FIRSTSOCKET); + if(result) + return result; + } + + Curl_pp_init(pp); /* init the response reader stuff */ + + pp->response_time = RESP_TIMEOUT; /* set default response time-out */ + pp->statemach_act = smtp_statemach_act; + pp->endofresp = smtp_endofresp; + pp->conn = conn; + + /* When we connect, we start in the state where we await the server greeting + */ + state(conn, SMTP_SERVERGREET); + + if(data->state.used_interface == Curl_if_multi) + result = smtp_multi_statemach(conn, done); + else { + result = smtp_easy_statemach(conn); + if(!result) + *done = TRUE; + } + + return result; +} + +/*********************************************************************** + * + * smtp_done() + * + * The DONE function. This does what needs to be done after a single DO has + * performed. + * + * Input argument is already checked for validity. + */ +static CURLcode smtp_done(struct connectdata *conn, CURLcode status, + bool premature) +{ + struct SessionHandle *data = conn->data; + struct FTP *smtp = data->state.proto.smtp; + CURLcode result=CURLE_OK; + (void)premature; + + if(!smtp) + /* When the easy handle is removed from the multi while libcurl is still + * trying to resolve the host name, it seems that the smtp struct is not + * yet initialized, but the removal action calls Curl_done() which calls + * this function. So we simply return success if no smtp pointer is set. + */ + return CURLE_OK; + + if(status) { + conn->bits.close = TRUE; /* marked for closure */ + result = status; /* use the already set error code */ + } + + /* clear these for next connection */ + smtp->transfer = FTPTRANSFER_BODY; + + return result; +} + +/*********************************************************************** + * + * smtp_perform() + * + * This is the actual DO function for SMTP. Get a file/directory according to + * the options previously setup. + */ + +static +CURLcode smtp_perform(struct connectdata *conn, + bool *connected, /* connect status after PASV / PORT */ + bool *dophase_done) +{ + /* this is SMTP and no proxy */ + CURLcode result=CURLE_OK; + + DEBUGF(infof(conn->data, "DO phase starts\n")); + + if(conn->data->set.opt_no_body) { + /* requested no body means no transfer... */ + struct FTP *smtp = conn->data->state.proto.smtp; + smtp->transfer = FTPTRANSFER_INFO; + } + + *dophase_done = FALSE; /* not done yet */ + + /* start the first command in the DO phase */ + result = smtp_mail(conn); + if(result) + return result; + + /* run the state-machine */ + if(conn->data->state.used_interface == Curl_if_multi) + result = smtp_multi_statemach(conn, dophase_done); + else { + result = smtp_easy_statemach(conn); + *dophase_done = TRUE; /* with the easy interface we are done here */ + } + *connected = conn->bits.tcpconnect; + + if(*dophase_done) + DEBUGF(infof(conn->data, "DO phase is complete\n")); + + return result; +} + +/*********************************************************************** + * + * smtp_do() + * + * This function is registered as 'curl_do' function. It decodes the path + * parts etc as a wrapper to the actual DO function (smtp_perform). + * + * The input argument is already checked for validity. + */ +static CURLcode smtp_do(struct connectdata *conn, bool *done) +{ + CURLcode retcode = CURLE_OK; + + *done = FALSE; /* default to false */ + + /* + Since connections can be re-used between SessionHandles, this might be a + connection already existing but on a fresh SessionHandle struct so we must + make sure we have a good 'struct SMTP' to play with. For new connections, + the struct SMTP is allocated and setup in the smtp_connect() function. + */ + Curl_reset_reqproto(conn); + retcode = smtp_init(conn); + if(retcode) + return retcode; + + retcode = smtp_parse_url_path(conn); + if(retcode) + return retcode; + + retcode = smtp_regular_transfer(conn, done); + + return retcode; +} + +/*********************************************************************** + * + * smtp_quit() + * + * This should be called before calling sclose(). We should then wait for the + * response from the server before returning. The calling code should then try + * to close the connection. + * + */ +static CURLcode smtp_quit(struct connectdata *conn) +{ + CURLcode result = CURLE_OK; + + result = Curl_pp_sendf(&conn->proto.smtpc.pp, "QUIT", NULL); + if(result) + return result; + state(conn, SMTP_QUIT); + + result = smtp_easy_statemach(conn); + + return result; +} + +/*********************************************************************** + * + * smtp_disconnect() + * + * Disconnect from an SMTP server. Cleanup protocol-specific per-connection + * resources. BLOCKING. + */ +static CURLcode smtp_disconnect(struct connectdata *conn) +{ + struct smtp_conn *smtpc= &conn->proto.smtpc; + + /* We cannot send quit unconditionally. If this connection is stale or + bad in any way, sending quit and waiting around here will make the + disconnect wait in vain and cause more problems than we need to. + */ + + /* The SMTP session may or may not have been allocated/setup at this + point! */ + (void)smtp_quit(conn); /* ignore errors on the LOGOUT */ + + Curl_pp_disconnect(&smtpc->pp); + + return CURLE_OK; +} + +/*********************************************************************** + * + * smtp_parse_url_path() + * + * Parse the URL path into separate path components. + * + */ +static CURLcode smtp_parse_url_path(struct connectdata *conn) +{ + /* the smtp struct is already inited in smtp_connect() */ + struct smtp_conn *smtpc = &conn->proto.smtpc; + struct SessionHandle *data = conn->data; + + /* url decode... */ + + return CURLE_OK; +} + +/* call this when the DO phase has completed */ +static CURLcode smtp_dophase_done(struct connectdata *conn, + bool connected) +{ + CURLcode result = CURLE_OK; + struct FTP *smtp = conn->data->state.proto.smtp; + (void)connected; + + if(smtp->transfer != FTPTRANSFER_BODY) + /* no data to transfer */ + result=Curl_setup_transfer(conn, -1, -1, FALSE, NULL, -1, NULL); + + return result; +} + +/* called from multi.c while DOing */ +static CURLcode smtp_doing(struct connectdata *conn, + bool *dophase_done) +{ + CURLcode result; + result = smtp_multi_statemach(conn, dophase_done); + + if(*dophase_done) { + result = smtp_dophase_done(conn, FALSE /* not connected */); + + DEBUGF(infof(conn->data, "DO phase is complete\n")); + } + return result; +} + +/*********************************************************************** + * + * smtp_regular_transfer() + * + * The input argument is already checked for validity. + * + * Performs all commands done before a regular transfer between a local and a + * remote host. + */ +static +CURLcode smtp_regular_transfer(struct connectdata *conn, + bool *dophase_done) +{ + CURLcode result=CURLE_OK; + bool connected=FALSE; + struct SessionHandle *data = conn->data; + data->req.size = -1; /* make sure this is unknown at this point */ + + Curl_pgrsSetUploadCounter(data, 0); + Curl_pgrsSetDownloadCounter(data, 0); + Curl_pgrsSetUploadSize(data, 0); + Curl_pgrsSetDownloadSize(data, 0); + + result = smtp_perform(conn, + &connected, /* have we connected after PASV/PORT */ + dophase_done); /* all commands in the DO-phase done? */ + + if(CURLE_OK == result) { + + if(!*dophase_done) + /* the DO phase has not completed yet */ + return CURLE_OK; + + result = smtp_dophase_done(conn, connected); + if(result) + return result; + } + + return result; +} + +static CURLcode smtp_setup_connection(struct connectdata * conn) +{ + struct SessionHandle *data = conn->data; + + if(conn->bits.httpproxy && !data->set.tunnel_thru_httpproxy) { + /* Unless we have asked to tunnel smtp operations through the proxy, we + switch and use HTTP operations only */ +#ifndef CURL_DISABLE_HTTP + if(conn->handler == &Curl_handler_smtp) + conn->handler = &Curl_handler_smtp_proxy; + else { +#ifdef USE_SSL + conn->handler = &Curl_handler_smtps_proxy; +#else + failf(data, "SMTPS not supported!"); + return CURLE_UNSUPPORTED_PROTOCOL; +#endif + } + /* + * We explicitly mark this connection as persistent here as we're doing + * SMTP over HTTP and thus we accidentally avoid setting this value + * otherwise. + */ + conn->bits.close = FALSE; +#else + failf(data, "SMTP over http proxy requires HTTP support built-in!"); + return CURLE_UNSUPPORTED_PROTOCOL; +#endif + } + + data->state.path++; /* don't include the initial slash */ + + return CURLE_OK; +} + +#endif /* CURL_DISABLE_SMTP */ |