diff options
Diffstat (limited to 'packages/vms')
| -rw-r--r-- | packages/vms/Makefile.am | 1 | ||||
| -rw-r--r-- | packages/vms/build_curlbuild_h.com | 327 | ||||
| -rw-r--r-- | packages/vms/build_vms.com | 50 |
3 files changed, 37 insertions, 341 deletions
diff --git a/packages/vms/Makefile.am b/packages/vms/Makefile.am index cbf7e1d0a..2be0b6673 100644 --- a/packages/vms/Makefile.am +++ b/packages/vms/Makefile.am @@ -1,5 +1,4 @@ EXTRA_DIST = \ - build_curlbuild_h.com \ build_vms.com \ config_h.com \ curlmsg.h \ diff --git a/packages/vms/build_curlbuild_h.com b/packages/vms/build_curlbuild_h.com deleted file mode 100644 index cc74bb26c..000000000 --- a/packages/vms/build_curlbuild_h.com +++ /dev/null @@ -1,327 +0,0 @@ -$! File: config_h.com -$! -$! $Id: config_h.com,v 1.1.1.1 2012/12/02 19:25:21 wb8tyw Exp $ -$! -$! This procedure attempts to figure out how to build a config.h file -$! for the current project. -$! -$! P1 specifies the config.h.in file or equivalent. If it is not specified -$! then this procedure will search for several common names of the file. -$! -$! The CONFIGURE shell script will be examined for hints and a few symbols -$! but most of the tests will not produce valid results on OpenVMS. Some -$! will produce false positives and some will produce false negatives. -$! -$! It is easier to just read the config.h_in file and make up tests based -$! on what is in it! -$! -$! This file will create an empty config_vms.h file if one does not exist. -$! The config_vms.h is intended for manual edits to handle things that -$! this procedure can not. -$! -$! The config_vms.h will be invoked by the resulting config.h file. -$! -$! This procedure knows about the DEC C RTL on the system it is on. -$! Future versions may be handle the GNV, the OpenVMS porting library, -$! and others. -$! -$! This procedure may not guess the options correctly for all architectures, -$! and is a work in progress. -$! -$! Copyright 2011, John Malmberg -$! -$! Permission to use, copy, modify, and/or distribute this software for any -$! purpose with or without fee is hereby granted, provided that the above -$! copyright notice and this permission notice appear in all copies. -$! -$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES -$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF -$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR -$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES -$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN -$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT -$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE. -$! -$! 15-Jan-2001 J. Malmberg Original -$! 29-Apr-2001 J. Malmberg Also look for config.*in* in a [.include] -$! subdirectory -$! 30-Apr-2001 J. Malmberg Update for SAMBA checks -$! 09-Apr-2005 J. Malmberg Update for RSYNC and large file. -$! 29-Sep-2011 J. Malmberg Update for Bash 4.2 -$! 01-Mar-2012 J. Malmberg Warn about getcwd(0,0) -$! 21-Dec-2012 J. Malmberg Update for gawk -$! 29-Dec-2012 J. Malmberg Update for curl -$!============================================================================ -$! -$ss_normal = 1 -$ss_abort = 44 -$ss_control_y = 1556 -$status = ss_normal -$on control_y then goto control_y -$on warning then goto general_error -$! -$! Some information for writing timestamps to created files -$!---------------------------------------------------------- -$my_proc = f$environment("PROCEDURE") -$my_proc_file = f$parse(my_proc,,,"NAME") + f$parse(my_proc,,,"TYPE") -$tab[0,8] = 9 -$datetime = f$element(0,".",f$cvtime(,"ABSOLUTE","DATETIME")) -$username = f$edit(f$getjpi("","USERNAME"),"TRIM") -$! -$pid = f$getjpi("","PID") -$tfile1 = "SYS$SCRATCH:config_h_temp1_''pid'.TEMP" -$dchfile = "SYS$SCRATCH:config_h_decc_''pid'.TEMP" -$configure_script = "SYS$SCRATCH:configure_script_''pid'.TEMP" -$! -$! Get the system type -$!---------------------- -$arch_type = f$getsyi("arch_type") -$! -$! -$! Write out the header -$!---------------------- -$gosub write_curlbuild_h_header -$! -$! -$! config.h.in could have at least five different names depending -$! on how it was transferred to OpenVMS -$!------------------------------------------------------------------ -$base_curlbuild = "sys$disk:[.include.curl]" -$if p1 .nes. "" -$then -$ cfile = p1 -$else -$ cfile = f$search("''base_curlbuild'curlbuild.h.in") -$ if cfile .eqs. "" -$ then -$ cfile = f$search("''base_curlbuild'curlbuild.h_in") -$ if cfile .eqs. "" -$ then -$ cfile = f$search("''base_curlbuild'curlbuildh.in") -$ if cfile .eqs. "" -$ then -$ cfile = f$search("''base_curlbuild'curlbuild__2eh.in") -$ if cfile .eqs. "" -$ then -$ cfile = f$search("''base_curlbuild'curlbuild.h__2ein") -$ if cfile .eqs. "" -$ then -$ cfile = f$search("''base_curlbuild'curlbuild.h$5nin") -$ endif -$ endif -$ endif -$ endif -$ endif -$endif -$! -$if cfile .eqs. "" -$then -$ write sys$output "Can not find ''base_curlbuild'curlbuild.h.in" -$ line_out = "Looked for curlbuild.h.in, curlbuild.h_in, curlbuild.in, " -$ line_out = line_out + "curlbuild__2eh.in, curlbuild.h__2ein, " -$ line_out = line_out + "curlbuild.h$5nin" -$ write/symbol sys$output line_out -$ goto general_error -$endif -$! -$open/read inf 'cfile' -$do_comment = 0 -$if_block = 0 -$cfgh_in_loop1: -$!set nover -$ read/end=cfgh_in_loop1_end inf line_in -$ xline = f$edit(line_in,"TRIM,COMPRESS") -$! -$! Blank line handling -$!--------------------- -$ if xline .eqs. "" -$ then -$ write tf "" -$ goto cfgh_in_loop1 -$ endif -$ xlen = f$length(xline) -$ key = f$extract(0,2,xline) -$! -$! deal with comments by copying exactly -$!----------------------------------------- -$ if (do_comment .eq. 1) .or. (key .eqs. "/*") -$ then -$ do_comment = 1 -$ write tf line_in -$ key = f$extract(xlen - 2, 2, xline) -$ if key .eqs. "*/" then do_comment = 0 -$ goto cfgh_in_loop1 -$ endif -$! -$! Some quick parsing -$!---------------------- -$ keyif = f$extract(0,3,xline) -$ key1 = f$element(0," ",xline) -$ key2 = f$element(1," ",xline) -$ key2a = f$element(0,"_",key2) -$ key2b = f$element(1,"_",key2) -$ key2_len = f$length(key2) -$ key2_h = f$extract(key2_len - 2, 2, key2) -$ key2_t = f$extract(key2_len - 5, 5, key2) -$ if key2_t .eqs. "_TYPE" then key2_h = "_T" -$ key64 = 0 -$ if f$locate("64", xline) .lt. xlen then key64 = 1 -$! -$!write sys$output "xline = ''xline'" -$! -$ if key1 .nes. "#undef" -$ then -$ write tf line_in -$ goto cfgh_in_loop1 -$ endif -$! -$! All versions of VMS have sys/types.h -$!---------------------------------------- -$ if (key2 .eqs. "CURL_PULL_SYS_TYPES_H") -$ then -$ write tf "#define ''key2' 1" -$ goto cfgh_in_loop1 -$ endif -$! -$! Most have sys/socket.h -$!------------------------- -$ if (key2 .eqs. "CURL_PULL_SYS_SOCKET_H") -$ then -$ write tf "#ifdef HAVE_SYS_SOCKET_H" -$ write tf "#define ''key2' 1" -$ write tf "#else" -$ write tf "#undef ''key2'" -$ write tf "#endif" -$ goto cfgh_in_loop1 -$ endif -$! -$! VAX/VMS 7.3 does not have sys/poll.h -$!---------------------------------------- -$ if (key2 .eqs. "CURL_PULL_SYS_POLL_H") -$ then -$ write tf "#ifdef HAVE_POLL_H" -$ write tf "#define ''key2' 1" -$ write tf "#else" -$ write tf "#undef ''key2'" -$ write tf "#endif" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_SIZEOF_LONG") -$ then -$ write tf "#define ''key2' SIZEOF_INT" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_SIZEOF_CURL_SOCKLEN_T") -$ then -$ write tf "#define ''key2' SIZEOF_INT" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_TYPEOF_CURL_SOCKLEN_T") -$ then -$ write tf "#define ''key2' size_t" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_TYPEOF_CURL_OFF_T") -$ then -$ write tf "#define ''key2' off_t" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_FORMAT_CURL_OFF_T") -$ then -$ write tf "#if (SIZEOF_OFF_T == 8)" -$ write tf "#define ''key2' ""lld""" -$ write tf "#else" -$ write tf "#define ''key2' ""ld""" -$ write tf "#endif" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_FORMAT_CURL_OFF_TU") -$ then -$ write tf "#if (SIZEOF_OFF_T == 8)" -$ write tf "#define ''key2' ""llu""" -$ write tf "#else" -$ write tf "#define ''key2' ""lu""" -$ write tf "#endif" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_FORMAT_OFF_T") -$ then -$ write tf "#if (SIZEOF_OFF_T == 8)" -$ write tf "#define ''key2' ""%lld""" -$ write tf "#else" -$ write tf "#define ''key2' ""%ld""" -$ write tf "#endif" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_SIZEOF_CURL_OFF_T") -$ then -$ write tf "#define ''key2' SIZEOF_OFF_T" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_SUFFIX_CURL_OFF_T") -$ then -$ write tf "#if (SIZEOF_OFF_T == 8)" -$ write tf "#define ''key2' LL" -$ write tf "#else" -$ write tf "#define ''key2' L" -$ write tf "#endif" -$ goto cfgh_in_loop1 -$ endif -$! -$ if (key2 .eqs. "CURL_SUFFIX_CURL_OFF_TU") -$ then -$ write tf "#if (SIZEOF_OFF_T == 8)" -$ write tf "#define ''key2' ULL" -$ write tf "#else" -$ write tf "#define ''key2' UL" -$ write tf "#endif" -$ goto cfgh_in_loop1 -$ endif -$! -$! -$! -$! If it falls through everything else, comment it out -$!----------------------------------------------------- -$ write tf "/* ", xline, " */" -$ goto cfgh_in_loop1 -$cfgh_in_loop1_end: -$close inf -$close tf -$! -$! Exit and clean up -$!-------------------- -$general_error: -$status = '$status' -$all_exit: -$set noon -$if f$trnlnm("tf","lnm$process",,"SUPERVISOR") .nes. "" then close tf -$if f$trnlnm("inf","lnm$process",,"SUPERVISOR") .nes. "" then close inf -$exit 'status' -$! -$! -$control_y: -$ status = ss_control_y -$ goto all_exit -$! -$! -$! gosub to write out a documentation header for config.h -$!---------------------------------------------------------------- -$write_curlbuild_h_header: -$outfile = "sys$disk:[.include.curl]curlbuild.h" -$create 'outfile' -$open/append tf 'outfile' -$write tf - - "/* [.include.curl]curlbuild.h. Generated from curlbuild.h.in by */" -$write tf - - "/* ", my_proc_file, tab, datetime, tab, username, tab, " */" -$write tf "" -$return diff --git a/packages/vms/build_vms.com b/packages/vms/build_vms.com index 519628eed..4f0b0f090 100644 --- a/packages/vms/build_vms.com +++ b/packages/vms/build_vms.com @@ -128,6 +128,11 @@ $! Added missing slash in cc_full_list. $! Removed unwanted extra quotes inside symbol tool_main $! for non-VAX architectures that triggered link failure. $! Replaced curl_sys_inc with sys_inc. +$! 19-Mar-2013, John Malmberg +$! symbol tool_main needs to be quoted when parse style is +$! set to exended in versions of VMS greater than 7.3-1. +$! Remove curlbuild.h generation as it should be pre-built +$! in the curl release or daily tarball. $! $!=========================================================================== $! @@ -198,6 +203,7 @@ $! $! Define the architecture-specific product file destination directory $! name(s). $! +$ parse_style = "TRADITIONAL" $ if (f$getsyi("HW_MODEL") .lt. 1024) $ then $ arch_name = "VAX" @@ -205,6 +211,31 @@ $ else $ arch_name = "" $ arch_name = arch_name + f$edit(f$getsyi("ARCH_NAME"), "UPCASE") $ if (arch_name .eqs. "") then arch_name = "UNK" +$! +$! Extended parsing option starts with VMS 7.3-1. +$! There is no 7.4, so that simplifies the parse a bit. +$! +$ node_swvers = f$getsyi("node_swvers") +$ version_patch = f$extract(1, f$length(node_swvers), node_swvers) +$ maj_ver = f$element(0, ".", version_patch) +$ min_ver_patch = f$element(1, ".", version_patch) +$ min_ver = f$element(0, "-", min_ver_patch) +$ patch = f$element(1, "-", min_ver_patch) +$ if patch .eqs. "-" then patch = "" +$ parse_x = 0 +$ if maj_ver .ges. "8" +$ then +$ parse_x = 1 +$ else +$ if maj_ver .eqs. "7" .and. min_ver .ges. "3" .and. patch .nes. "" +$ then +$ parse_x = 1 +$ endif +$ endif +$ if parse_x +$ then +$ parse_style = f$getjpi("", "parse_style_perm") +$ endif $ endif $! $ exedir = proc_dev_dir - delim + ".''arch_name'" + delim @@ -275,8 +306,6 @@ $ if (f$search(prods) .nes. "") then set prot=o:rwed 'prods' $ if (f$search(prods) .nes. "") then delete /log 'prods' $ file = "[]config_vms.h" $ if f$search(file) .nes. "" then delete/log 'file';* -$ file = "[.include.curl]curlbuild.h" -$ if f$search(file) .nes. "" then delete/log 'file';* $ file = "[.lib]config_vms.h" $ if f$search(file) .nes. "" then delete/log 'file';* $ goto Common_Exit @@ -654,15 +683,6 @@ $! set nover $endif $! $! -$write sys$output "Creating the new curlbuild.h" -$new_conf = f$search("[.include.curl]curlbuild.h") -$if new_conf .eqs. "" -$then -$! set ver -$ @'proc_dev_dir'build_curlbuild_h.com -$! set nover -$endif -$! $! $ on control_y then goto Common_Exit $! @@ -727,13 +747,17 @@ $! $! If we are not on VAX, then we want the debug symbol table in $! a separate file. $! VAX needs the tool_main unquoted in uppercase, -$! Alpha and IA64 need tool_main quoted in exact case. +$! Alpha and IA64 need tool_main quoted in exact case when parse style is +$! extended. $ link_dsf1 = "" $ link_dsf2 = "" $ tool_main = "tool_main" $ if arch_name .nes. "VAX" $ then -$ tool_main = "tool_main" +$ if parse_style .eqs. "EXTENDED" +$ then +$ tool_main = """tool_main""" +$ endif $ link_dsf1 = "/dsf=" + exedir + "CURL.DSF" $ link_dsf2 = "/dsf=" + exedir + "CURL_DEBUG.DSF" $ endif |