aboutsummaryrefslogtreecommitdiff
path: root/packages/vms
diff options
context:
space:
mode:
Diffstat (limited to 'packages/vms')
-rw-r--r--packages/vms/build_vms.com49
-rw-r--r--packages/vms/clean_gnv_curl.com9
-rw-r--r--packages/vms/compare_curl_source.com12
-rw-r--r--packages/vms/curl_gnv_build_steps.txt77
-rw-r--r--packages/vms/gnv_link_curl.com3
-rw-r--r--packages/vms/make_pcsi_curl_kit_name.com2
-rw-r--r--packages/vms/readme198
-rw-r--r--packages/vms/setup_gnv_curl_build.com24
8 files changed, 307 insertions, 67 deletions
diff --git a/packages/vms/build_vms.com b/packages/vms/build_vms.com
index bfead6cf0..4ec7635e2 100644
--- a/packages/vms/build_vms.com
+++ b/packages/vms/build_vms.com
@@ -340,18 +340,64 @@ $ file = "[]config_vms.h"
$ if f$search(file) .nes. "" then delete/log 'file';*
$ file = "[]config.h"
$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[]curl-config."
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[]libcurl.pc"
+$ if f$search(file) .nes. "" then delete/log 'file';*
$ file = "[.lib.cxx_repository]cxx$demangler_db."
$ if f$search(file) .nes. "" then delete/log 'file';*
$ file = "[.src.cxx_repository]cxx$demangler_db."
$ if f$search(file) .nes. "" then delete/log 'file';*
$ file = "[.lib]config_vms.h"
$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl_crtl_init"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ file = "[...]gnv$curlmsg"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ file = "[...]curlmsg"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ file = "[...]report_openssl_version"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ file = "[...]hp_ssl_release_info.txt"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]gnv_libcurl_xfer.mar_exact"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]gnv_libcurl_xfer"
+$ if f$search("''file'.lis") .nes. "" then delete/log 'file'.lis;*
+$ if f$search("''file'.obj") .nes. "" then delete/log 'file'.obj;*
+$ if f$search("''file'.opt") .nes. "" then delete/log 'file'.opt;*
+$ file = "[...]curl-*_original_src.bck"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl-*_vms_src.bck"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]curl-*.release_notes"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]*curl*.pcsi$desc"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$ file = "[...]*curl*.pcsi$text"
+$ if f$search(file) .nes. "" then delete/log 'file';*
+$!
$ if clean_all .eq. 0 then goto Common_Exit
$ endif
$!
$!
$ if clean_all .ne. 0
$ then
+$ file = "[...]gnv$libcurl"
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ if f$search("''file'.map") .nes. "" then delete/log 'file'.map;*
+$ if f$search("''file'.dsf") .nes. "" then delete/log 'file'.dsf;*
+$ file = "[.src]curl"
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ if f$search("''file'.map") .nes. "" then delete/log 'file'.map;*
+$ if f$search("''file'.dsf") .nes. "" then delete/log 'file'.dsf;*
$ prods = proc_dev_dir - delim + ".ALPHA" + delim + "*.*;*"
$ if (f$search(prods) .nes. "") then delete /log 'prods'
$ prods = proc_dev_dir + "ALPHA" + ".DIR;1"
@@ -367,6 +413,9 @@ $ if (f$search(prods) .nes. "") then delete /log 'prods'
$ prods = proc_dev_dir + "VAX"+ ".DIR;1"
$ if (f$search(prods) .nes. "") then set prot=o:rwed 'prods'
$ if (f$search(prods) .nes. "") then delete /log 'prods'
+$ file = "[...]macro32_exactcase"
+$ if f$search("''file'.exe") .nes. "" then delete/log 'file'.exe;*
+$ if f$search("''file'.jnl") .nes. "" then delete/log 'file'.jnl;*
$ goto Common_Exit
$ endif
$!
diff --git a/packages/vms/clean_gnv_curl.com b/packages/vms/clean_gnv_curl.com
index 25af784cc..0bef42c1b 100644
--- a/packages/vms/clean_gnv_curl.com
+++ b/packages/vms/clean_gnv_curl.com
@@ -211,6 +211,15 @@ $!
$ file = "lcl_root:[.packages.vms]macro32_exactcase.exe"
$ if f$search(file) .nes. "" then delete 'file';*
$!
+$ file = "lcl_root:[.packages.vms]report_openssl_version.exe"
+$ if f$search(file) .nes. "" then delete 'file';*
+$!
+$ file = "lcl_root:[.packages.vms]hp_ssl_release_info.txt"
+$ if f$search(file) .nes. "" then delete 'file';*
+$!
+$ file = "lcl_root:[.src]curl.exe"
+$ if f$search(file) .nes. "" then delete 'file';*
+$!
$all_exit:
$!
$! Put the default back.
diff --git a/packages/vms/compare_curl_source.com b/packages/vms/compare_curl_source.com
index 7df4bedef..eeaec31dc 100644
--- a/packages/vms/compare_curl_source.com
+++ b/packages/vms/compare_curl_source.com
@@ -43,7 +43,7 @@ $! The copy directory is vms_root:[project_name]
$! The UPDATE parameter is ignored.
$!
$! This setting is used to make sure that the working vms directory
-$! and the CVS checkout directory have the same contents.
+$! and the repository checkout directory have the same contents.
$!
$! If P1 is "SRCBCK" then this
$! The source directory tree is: src_root:[project_name]
@@ -55,7 +55,7 @@ $!
$! This is to make sure that the backup save set for the unmodified
$! source is up to date.
$!
-$! If your CVS checkout is not on an NFS mounted volume, you do not
+$! If your repository checkout is not on an NFS mounted volume, you do not
$! need to use this option or have the logical name src_root1 defined.
$!
$! If P1 is "VMSBCK" then this changes the two directories:
@@ -195,8 +195,6 @@ $ ref_name = f$parse(ref_spec,,,"NAME")
$ ref_type = f$parse(ref_spec,,,"TYPE")
$!
$!
-$ if f$locate(".CVS]", ref_dir) .lt. f$length(ref_dir) then goto loop
-$
$ rel_path = ref_dir - "[" - ref_base_dir
$! rel_path_len = f$length(rel_path) - 1
$! delim = f$extract(rel_path_len, 1, rel_path)
@@ -336,12 +334,6 @@ $!
$ wrk_skip = 0
$ ref_utype = f$edit(ref_type,"UPCASE")
$ ref_ufname = f$edit(ref_fname,"UPCASE")
-$ if ref_ufname .eqs. "CVS.DIR" then wrk_skip = 1
-$ if ref_fname .eqs. ".cvsignore" then wrk_skip = 1
-$ if ref_fname .eqs. "Entries." then wrk_skip = 1
-$ if ref_fname .eqs. "Repository." then wrk_skip = 1
-$ if ref_fname .eqs. "Root." then wrk_skip = 1
-$!
$!
$ if wrk_skip .eq. 0
$ then
diff --git a/packages/vms/curl_gnv_build_steps.txt b/packages/vms/curl_gnv_build_steps.txt
index 6be139b10..e21b37d07 100644
--- a/packages/vms/curl_gnv_build_steps.txt
+++ b/packages/vms/curl_gnv_build_steps.txt
@@ -1,7 +1,5 @@
From File: curl_gnv_build_steps.txt
-$Id$
-
Copyright 2009, John Malmberg
Permission to use, copy, modify, and/or distribute this software for any
@@ -23,7 +21,7 @@ Unix builds use.
Building CURL on OpenVMS using GNV requires GNV V2.1-2 or the updated
images that are available via anonymous FTP at encompasserve.org in the gnv
directory. It also requires the GNV Bash 4.2.45 kit as an update from the
-same location.
+same location or from the sourceforge.net GNV project.
The HP C 7.x compiler was used for building the GNV version.
@@ -51,14 +49,15 @@ VMS_ROOT: is for the source files that are specific to OpenVMS.
LCL_ROOT: is manually created to have the same base and sub-directories as
SRC_ROOT: and VMS_ROOT:
-The logical name REF_ROOT: is defined to be a logical name that is a search
-list for VMS_ROOT:,SRC_ROOT:
+The logical name REF_ROOT: may be defined to be a search list for
+VMS_ROOT:,SRC_ROOT:
-The logical name PRJ_ROOT: is defined to be a logical name that is a search
-list for LCL_ROOT:,REF_ROOT:
+The logical name PRJ_ROOT: is defined to be a search list for
+LCL_ROOT:,VMS_ROOT:,SRC_ROOT:
For the make install process to work, it must have write access to the
directories referenced by the GNU: logical name.
+
In future releases of GNV, and with GNV Bash 4.2.45 installed, this name
should be GNV$GNU:
@@ -71,9 +70,15 @@ OLD_GNU: can be set up to reference the real GNV directory tree.
Then a local copy of the GNU/GNV$GNU logical names can be set up as a search
list such as NEW_GNU:,OLD_GNU:
-The directory NEW_GNU:[usr] should be created. The make install phase will
+The directory NEW_GNU:[usr] should be created. The make install phase should
create all the other directories.
+The make install process may abort if curl is already because it can not
+uninstall the older version of curl because it does not have permission.
+
+The file stage_curl_install.com is used set up a new_gnu: directory tree
+for testing. The PCSI kitting procedure uses these files as input.
+
These files do not create the directories in the VMS_ROOT and LCL_ROOT
directory trees. You can create them with commands similar to:
@@ -131,13 +136,13 @@ This command procedure does the following:
$ @gnv_link_curl.com
- $ purge new_gnu:[*...]/log
+ $ @stage_curl_install.com
+ $ purge new_gnu:[*...]/log
To clean up after a build to start over, the following commands are used:
$ bash
- bash$ export GNV_DISABLE_DCL_FALLBACK=1
bash$ cd ../..
bash$ make clean
bash$ exit
@@ -161,6 +166,10 @@ files from new_gnu: to old_gnu: at your convenience.
Building a PCSI kit for an archictecture takes the following steps after
making sure that you have a working build environment.
+Note that it requires manually creating two logical names as described
+below. It is intentional that they be manually set. This is for
+branding the PCSI kit based on who is making the kit.
+
1. Make sure that you have a staging directory that can be referenced
by the path STAGE_ROOT:[KIT]
@@ -174,9 +183,9 @@ making sure that you have a working build environment.
4. Define the logical name GNV_PCSI_PRODUCER_FULL_NAME to be your full
name or full name of your company.
- 5. If you are producing an update kit, then define the logical name
- GNV_PCSI_PATCHLEVEL to the letter E followed by a number. Do not
- use a patch level for kits built from the daily CVS snapshot.
+ 5. If you are producing an update kit, then update the file
+ vms_eco_level.h by changing the value for the VMS_ECO_LEVEL macro.
+ This file is currently only used in building the PCSI kit.
6. Edit the file PCSI_GNV_CURL_FILE_LIST.TXT if there are new files added
to the kit. These files should all be ODS-2 legal filenames and
@@ -196,15 +205,49 @@ making sure that you have a working build environment.
step, the PCSI kit built by these steps does a rename to the correct
case as a post install step.
- 7. Build the PCSI kit with @pcsi_product_gnv_curl.com
+ 7. Edit the build_curl_pcsi_desc.com and build_curl_pcsi_text.com if you
+ have changed the version of ZLIB that curl is built against.
+
+ 8. Prepare to backup the files for building the kit.
+
+ Note that if src_root: or vms_root: are NFS mounted disks, the
+ step of backing up the source files will probably hang or fail.
+
+ You need to copy the source files to VMS mounted disks and create
+ logical names SRC_ROOT1 and VMS_ROOT1 to work around this to to
+ reference local disks. Make sure src_root1:[000000] and
+ vms_root1:[000000] exist and can be written to.
+
+ The command procedure compare_curl_source can be used to check
+ those directories and keep them up to date.
+
+ @compare_curl_source.com SRCBCK UPDATE
+
+ This compares the reference project source with the backup
+ staging directory for it and updates with any changes.
+
+ @compare_curl_source.com VMSBCK UPDATE
+
+ This compares the VMS specific source with the backup
+ staging directory for it and updates with any changes.
+
+ Leave off "UPDATE" to just check without doing any changes.
+
+ If you are not using NFS mounted disks and do not want to have a
+ separate directory for staging the sources for backup make sure
+ that src_root1: and vms_root1: do not exist.
+
+ 9. Build the PCSI kit with @pcsi_product_gnv_curl.com
The following message is normal:
%PCSI-I-CANNOTVAL, cannot validate
- EAGLE$DQA0:[stage_root.][kit]JEM-AXPVMS-CURL-D0719-6-1.PCSI;1
+ EAGLE$DQA0:[stage_root.][kit]VMSPORTS-AXPVMS-CURL-V0731-0-1.PCSI;1
-PCSI-I-NOTSIGNED, product kit is not signed and therefore has
no manifest file
- This will result in both compressed and uncompressed kits for the target
- platform.
+ This will result in an uncompressed kit for the target platform.
+ On Alpha and Integrity, the pcsi_product_gnv_curl.com can be used with
+ the "COMPRESSED" parameter to build both a compressed and uncompressed
+ kits.
Good Luck.
diff --git a/packages/vms/gnv_link_curl.com b/packages/vms/gnv_link_curl.com
index 3e6eba091..fadbbcceb 100644
--- a/packages/vms/gnv_link_curl.com
+++ b/packages/vms/gnv_link_curl.com
@@ -278,7 +278,8 @@ and before installing Curl.
$PRODUCT EXTRACT FILE -
/select=(ssl$libcrypto_shr32.exe,ssl$libssl_shr32.exe)-
/source=device:[dir] -
- /destination=device:[vms$common.gnv.lib]
+ /options=noconfirm -
+ /destination=device:[vms$common.gnv.lib] SSL
The [vms$common.sys$startup}curl_startup.com procedure will then configure
libcurl to use these shared images instead of the system ones.
diff --git a/packages/vms/make_pcsi_curl_kit_name.com b/packages/vms/make_pcsi_curl_kit_name.com
index d896da281..f644fe3ec 100644
--- a/packages/vms/make_pcsi_curl_kit_name.com
+++ b/packages/vms/make_pcsi_curl_kit_name.com
@@ -136,7 +136,7 @@ $! We encode the snapshot date into the version as an ECO since a daily
$! can never have an ECO.
$!
$! version_type = 'V' for a production release, and 'D' for a build from a
-$! daiy CVS snapshot.
+$! daiy snapshot of the curl source.
$ majorver = f$element(0, ".", raw_version)
$ minorver = f$element(1, ".", raw_version)
$ raw_update = f$element(2, ".", raw_version)
diff --git a/packages/vms/readme b/packages/vms/readme
index 22fde88e2..1b2458053 100644
--- a/packages/vms/readme
+++ b/packages/vms/readme
@@ -11,6 +11,11 @@ History:
15-MAR-2004, MSK, Updated to reflect the new files in this directory.
14-FEB-2005, MSK, removed config-vms.h_with* file comments
10-FEB-2010, SMS. General update.
+14-Jul-2013, JEM, General Update, add GNV build information.
+
+
+The release notes installed by the PCSI kit consist of this file and the
+curl_gnv_build_steps.txt and other useful information.
Prerequisites:
@@ -20,37 +25,161 @@ OpenSSL or hp SSL, if you want SSL support
What is Here:
-This directory contains the following files:
+This directory contains the following files for a DCL based build.
+
+backup_gnv_curl_src.com This procedure backs up the source modules for
+ creating a PCSI kit.
+
+build_curl-config_script.com
+ Procedure to create the curl-config script.
+
+build_gnv_curl.com This procedure does a build of curl using the
+ GNV utilities and then uses DCL tools to build
+ the libcurl shared image. The setup_gnv_curl_build.com
+ procedure must be run first.
+
+build_gnv_curl_pcsi_desc.com
+ This procedure builds the pcsi$desc file for
+ creating a PCSI based package.
+
+build_gnv_curl_pcsi_text.com
+ This procedure builds the pcsi$text file for
+ creating a PCSI based package.
+
+build_gnv_curl_release_notes.com
+ This procedure creates the release notes for
+ a PCSI kit based on curl_release_note_start.txt,
+ this readme file, and the curl_gnv_build_steps.txt
+
+build_libcurl_pc.com Procedure to create a libcurl.pc file.
+
+build_vms.com DCL based build procedure.
+
+clean_gnv_curl.com This procedure cleans up the files generated by
+ a GNV based build.
+
+config_h.com DCL based procedure used by build_vms.com
+ to run generate the curl_config.h file.
+ This is a generic procedure that does most
+ of the work for generating config.h files.
+
+compare_curl_source.com Procedure to compare the working directory
+ with a repository directory or a backup staging
+ directory.
+
+curl_crtl_init.c A special pre-initialization routine to for
+ programs to behave more Unix like when run
+ under GNV.
+
+curl_gnv_build_steps.txt
+ Detailed instructions on how to built curl using
+ GNV and how to build the libcurl shared image and
+ PCSI kit.
+
+curl_release_note_start.txt
+ The first part of the curl release notes.
+
+curl_startup.com A procedure run at VMS startup to install the
+ libcurl shared image and to set up the needed
+ logical names.
-build_vms.com Build procedure.
-config-vms.h VMS-specific config.h.
curlmsg.h C header defining cURL status code macros.
+
curlmsg.msg Error message source for curlmsg.h and curlmsg.sdl.
+
curlmsg.sdl SDL source defining cURL status code constants.
+
curlmsg_vms.h Mapping of cURL status codes to VMS-form codes.
-hpssl_alpha.opt LINK options file for HP SSL on Alpha.
-hpssl_ia64.opt LINK options file for HP SSL on IA64.
-hpssl_vax.opt LINK options file for HP SSL on VAX.
-ldap.opt LINK options file for LDAP.
+
+generate_config_vms_h_curl.com
+ DCL procedure to generate the curl specific
+ definitions for curl_config.h that config_h.com
+ can not properly generate.
+
+generate_vax_transfer.com
+ DCL procedure to read an Alpha/IA64 symbol vector
+ linker option file and generate the VAX transfer
+ vector modules.
+
+gnv_conftest.c_first A helper file for the configure script.
+
+gnv_curl_configure.sh A script to run the configure script with the
+ options needed for VMS.
+
+gnv_libcurl_symbols.opt The symbol vectors needed for Alpha and IA64
+ libcurl shared image.
+
+gnv_link_curl.com Links the libcurl shared image and then links a curl
+ image to use the libcurl.
+
+macro32_exactcase.patch The patch file needed to modify VAX Macro32 to be
+ case sensitive and case preserving.
+
Makefile.am cURL kit file list for this directory.
+
Makefile.in cURL kit makefile source for this directory.
-openssl_alpha.opt LINK options file for OpenSSL on Alpha.
-openssl_ia64.opt LINK options file for OpenSSL on IA64.
-openssl_ssl_alpha.opt LINK options file for OpenSSL (SSL_ prefix) on Alpha.
-openssl_ssl_ia64.opt LINK options file for OpenSSL (SSL_ prefix) on IA64.
-openssl_ssl_vax.opt LINK options file for OpenSSL (SSL_ prefix) on VAX.
-openssl_vax.opt LINK options file for OpenSSL on VAX.
+
+make_gnv_curl_install.sh
+ Script to do a make install using GNV after running
+ the configure script.
+
+make_pcsi_curl_kit_name.com
+ This generates the name of the PCSI kit based on
+ the version of curl being built.
+
+pcsi_gnv_curl_file_list.txt
+ This is a text file describing what files should
+ be included in a PCSI kit.
+
+pcsi_product_gnv_curl.com
+ This generates the PCSI kit after the libcurl
+ shared image has been made.
+
readme. This file.
+report_openssl_version.c
+ Program to check that the openssl version is new
+ enough for building a shared libcurl image.
+
+setup_gnv_curl_build.com
+ This procedure sets up symbols and logical names
+ for a GNV build environment and also copies some
+ helper files.
+
+stage_curl_install.com This procedure sets up new_gnu: directory tree to
+ for testing the install and building the PCSI kit.
+ It takes a "remove" option to remove all the staged
+ files.
+
+vms_eco_level.h This sets the ECO level for the PCSI kit name.
+
How to Build:
-The (brute-force) builder is [.packages.vms]build_vms.com. Comments in
-this procedure describe various optional parameters which enable or
-disable optional program features, or which control the build in other
-ways. Product files (.EXE, .H, .LIS, .MAP, .OBJ, .OLB, ...) should be
-produced in an architecture-specific subdirectory under this directory
-([.ALPHA], [.IA64], [.VAX]).
+The GNV based build and the DCL based build procedures are not compatible
+and you must make sure that none of the build files are present before
+running a different type of build. Use the "REALCLEAN" option for
+BUILD_VMS.COM and the "REALCLEAN" option for clean_gnv_curl.com.
+
+The (brute-force) DCL based builder is [.packages.vms]build_vms.com.
+Comments in this procedure describe various optional parameters which
+enable or disable optional program features, or which control the build
+in other ways. Product files (.EXE, .H, .LIS, .MAP, .OBJ, .OLB, ...)
+should be produced in an architecture-specific subdirectory under this
+directory ([.ALPHA], [.IA64], [.VAX]).
+
+The file curl_gnv_build_steps.txt contains information on buildling using
+the GNV tool kit, building a shared libcurl, and producting a PCSI kit for
+distribution. The curl_gnv_build_steps.text is included in the release
+notes file of the PCSI kit.
+
+The building with 64 bit pointers does not currently work.
+
+The build procedure will detect if HP OpenSSL, LDAP, and Kerberos are
+installed and default to building with them.
+
+The build procedure will also detect if a compatible ZLIB shared image
+is installed from a PCSI kit and default to using it.
Example build commands:
@@ -58,13 +187,42 @@ produced in an architecture-specific subdirectory under this directory
@ [.packages.vms]build_vms.com LARGE LDAP
submit /noprint [.packages.vms]build_vms.com /param = (LARGE, LDAP)
+The build_vms.com procedure does not build the shared image file or the PCSI
+kit. If you have built a curl with ZLIB and HPSSL support as well as if
+LDAP and Kerberos installed, you can use the GNV_LINK_CURL.COM file.
+
+The GNV_LINK_CURL.COM contains information on how to link and run with a newer
+version of HP SSL than what may be install on an Alpha or IA64 based system.
+
+To build the PCSI kit, follow the the instructions in the file
+curl_gnv_build_steps.txt.
Other Notes:
+This release fixes known bugs #22, and #57 in the [curl.docs]known_bugs.
+file.
+
+The libcurl formdata.c module and Curl tools post form now have some
+understanding of VMS file types. Files will be posted in STREAM_LF format.
+
+The Curl tool now has some understanding of VMS file types and will upload the
+files in STREAM_LF fomat.
+
+When CURL is uploading a VARIABLE format VMS file, it is less efficient as in
+order to get the file size, it will first read the entire file once, and then
+read the file again for the actual upload.
+
+The Curl tool will now always download files into STREAM_LF format. Even if a
+file by that name with a different format already exists. This is needed to
+allow interrupted downloads to be continued.
+
+
+The libcurl file module still does not understand VMS file types and requires
+the input files to be in STREAM_LF to work propery.
+
The test suites are not supported as of 7.11.0.
The curlmsg.sdl and curlmsg.h files are generated from curlmsg.msg.
This is not done automatically, since the .MSG file is a hand edit
of the relevant stuff from the curl.h file. If you want to do this
yourself you'll need the SDL package from the freeware collection.
-
diff --git a/packages/vms/setup_gnv_curl_build.com b/packages/vms/setup_gnv_curl_build.com
index d6a80ac2f..beec733c3 100644
--- a/packages/vms/setup_gnv_curl_build.com
+++ b/packages/vms/setup_gnv_curl_build.com
@@ -269,26 +269,14 @@ $ endif
$!
$!
$!
-$! Need to build the GNV common init module.
+$! Need to build the common init module.
$!-------------------------------------------
-$ if f$search("[vms_common]vms_crtl_init_unix.obj") .nes. ""
+$ init_obj = "[.packages.vms]curl_crtl_init.obj"
+$ if f$search(init_obj) .eqs. ""
$ then
-$! Common copy, which should be more up to date than the one in the kit.
-$!------------------------------------------------------------------------
-$ define/job gnv_vms_common [vms_common]
-$ write sys$output "Using common vms_crtl_init_unix.obj"
-$ else
-$! For some reason the common files are missing so use the local copies
-$!------------------------------------------------------------------------
-$ define/job gnv_vms_common 'default_dir'
-$ init_obj = "gnv_vms_common:vms_crtl_init_unix.obj"
-$ if f$search(init_obj) .eqs. ""
-$ then
-$ cc'cflags' 'default_dir'vms_crtl_init.c-
- /define=GNV_UNIX_TOOL=1/obj='init_obj'
-$ purge 'init_obj'
-$ rename 'init_obj' ;1
-$ endif
+$ cc'cflags' 'default_dir'curl_crtl_init.c/obj='init_obj'
+$ purge 'init_obj'
+$ rename 'init_obj' ;1
$ endif
$!
$all_exit: