15 files changed, 2690 insertions, 0 deletions
diff --git a/packages/vms/backup_gnv_curl_src.com b/packages/vms/backup_gnv_curl_src.com
new file mode 100644
index 000000000..9a7905b30
--- /dev/null
+++ b/packages/vms/backup_gnv_curl_src.com
@@ -0,0 +1,132 @@
+$! File: Backup_gnv_curl_src.com
+$!
+$! $Id$
+$!
+$! Procedure to create backup save sets for installing in a PCSI kit.
+$!
+$! To comply with most Open Source licenses, the source used for building
+$! a kit will be packaged with the distribution kit for the binary.
+$!
+$! Backup save sets are the only storage format that I can expect a
+$! VMS system to be able to extract ODS-5 filenames and directories.
+$!
+$! The make_pcsi_kit_name.com needs to be run before this procedure to
+$! properly name the files that will be created.
+$!
+$! This file is created from a template file for the purpose of making it
+$! easier to port Unix code, particularly open source code to VMS.
+$! Therefore permission is freely granted for any use.
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$! 13-Jun-2009 J. Malmberg
+$!
+$!===========================================================================
+$!
+$! Save default
+$ default_dir = f$environment("DEFAULT")
+$!
+$ arch_type = f$getsyi("ARCH_NAME")
+$ arch_code = f$extract(0, 1, arch_type)
+$!
+$ if arch_code .nes. "V"
+$ then
+$   set proc/parse=extended
+$ endif
+$!
+$ ss_abort = 44
+$ status = ss_abort
+$!
+$ kit_name = f$trnlnm("GNV_PCSI_KITNAME")
+$ if kit_name .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_BASH_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$ producer = f$trnlnm("GNV_PCSI_PRODUCER")
+$ if producer .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_BASH_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$ filename_base = f$trnlnm("GNV_PCSI_FILENAME_BASE")
+$ if filename_base .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_BASH_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$!
+$ node_swvers = f$getsyi("NODE_SWVERS")
+$ node_swvers_type = f$extract(0, 1, node_swvers)
+$ node_swvers_vers = f$extract(1, f$length(node_swvers), node_swvers)
+$ swvers_maj = f$element(0, ".", node_swvers_vers)
+$ node_swvers_min_update = f$element(1, ".", node_swvers_vers)
+$ swvers_min = f$element(0, "-", node_swvers_min_update)
+$ swvers_update = f$element(1, "-", node_swvers_min_update)
+$!
+$ if swvers_update .eqs. "-" then swvers_update = ""
+$!
+$ vms_vers = f$fao("!2ZB!2ZB!AS", 'swvers_maj', 'swvers_min', swvers_update)
+$!
+$!
+$!
+$! If available make an interchange save set
+$!-------------------------------------------
+$ interchange = ""
+$ if arch_code .eqs. "V"
+$ then
+$   interchange = "/interchange"
+$ endif
+$ if (swvers_maj .ges. "8") .and. (swvers_min .ges. 4)
+$ then
+$   interchange = "/interchange/noconvert"
+$ endif
+$!
+$!
+$! Move to the base directories
+$ set def [--]
+$!
+$! Put things back on error.
+$ on warning then goto all_exit
+$!
+$ current_default = f$environment("DEFAULT")
+$ my_dir = f$parse(current_default,,,"DIRECTORY") - "[" - "<" - ">" - "]"
+$!
+$ src_root = "src_root:"
+$ if f$trnlnm("src_root1") .nes. "" then src_root = "src_root1:"
+$ backup'interchange' 'src_root'[curl...]*.*;0 -
+           'filename_base'_original_src.bck/sav
+$ status = $status
+$!
+$! There may be a VMS specific source kit
+$!-----------------------------------------
+$ vms_root = "vms_root:"
+$ if f$trnlnm("vms_root1") .nes. "" then vms_root = "vms_root1:"
+$ files_found = 0
+$ define/user sys$error nl:
+$ define/user sys$output nl:
+$ directory 'vms_root'[...]*.*;*/exc=*.dir
+$ if '$severity' .eq. 1 then files_found = 1
+$!
+$ if files_found .eq. 1
+$ then
+$   backup'interchange' 'vms_root'[curl...]*.*;0 -
+            'filename_base'_vms_src.bck/sav
+$   status = $status
+$ endif
+$!
+$all_exit:
+$ set def 'default_dir'
+$ exit
diff --git a/packages/vms/build_curl-config_script.com b/packages/vms/build_curl-config_script.com
new file mode 100644
index 000000000..ae9d18119
--- /dev/null
+++ b/packages/vms/build_curl-config_script.com
@@ -0,0 +1,288 @@
+$! File: build_libcurl_pc.com
+$!
+$! $Id:$
+$!
+$! Build the curl-config file from the config_curl.in file
+$!
+$! Copyright 2013, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$!
+$! 15-Jun-2013  J. Malmberg
+$!
+$!===========================================================================
+$!
+$! Skip this if the curl-config. already exists.
+$ if f$search("[--]curl-config.") .nes. "" then goto all_exit
+$!
+$! Need to know the kit type.
+$ kit_name = f$trnlnm("GNV_PCSI_KITNAME")
+$ if kit_name .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$!
+$!
+$! Parse the kit name into components.
+$!---------------------------------------
+$ producer = f$element(0, "-", kit_name)
+$ base = f$element(1, "-", kit_name)
+$ product = f$element(2, "-", kit_name)
+$ mmversion = f$element(3, "-", kit_name)
+$ majorver = f$extract(0, 3, mmversion)
+$ minorver = f$extract(3, 2, mmversion)
+$ updatepatch = f$element(4, "-", kit_name)
+$ if updatepatch .eqs. "-" then updatepatch = ""
+$!
+$! kit type of "D" means a daily build
+$ kit_type = f$edit(f$extract(0, 1, majorver), "upcase")
+$!
+$ cfg_file_in = "[--]curl-config.in"
+$!
+$ if f$search(cfg_file_in) .eqs. ""
+$ then
+$    write sys$output "Can not find curl-config.in."
+$    goto all_exit
+$ endif
+$!
+$ if (f$getsyi("HW_MODEL") .lt. 1024)
+$ then
+$    arch_name = "VAX"
+$ else
+$    arch_name = ""
+$    arch_name = arch_name + f$edit(f$getsyi("ARCH_NAME"), "UPCASE")
+$    if (arch_name .eqs. "") then arch_name = "UNK"
+$ endif
+$!
+$!
+$ curl_version = "0.0.0"
+$ open/read vf [--.include.curl]curlver.h
+$version_loop:
+$   read vf/end=version_loop_end line_in
+$   if line_in .eqs. "" then goto version_loop
+$   key = f$element(0, " ", line_in)
+$   if key .nes. "#define" then goto version_loop
+$   name = f$element(1, " ", line_in)
+$   if name .eqs. "LIBCURL_VERSION"
+$   then
+$       curl_version = f$element(2, " ", line_in) - """" - """"
+$       goto version_loop
+$   endif
+$   if name .eqs. "LIBCURL_VERSION_NUM"
+$   then
+$       version_num_hex = f$element(2, " ", line_in)
+$       version_num = version_num_hex - "0x"
+$       goto version_loop
+$   endif
+$version_loop_end:
+$ close vf
+$!
+$!
+$ create [--]curl-config.
+$ open/append pco [--]curl-config.
+$ open/read pci 'cfg_file_in'
+$cfg_file_loop:
+$ read pci/end=cfg_file_loop_end line_in
+$!
+$! blank lines
+$ if line_in .eqs. ""
+$ then
+$   write pco ""
+$   goto cfg_file_loop
+$ endif
+$!
+$! comment lines
+$ key = f$extract(0, 1, line_in)
+$ if key .eqs. "#"
+$ then
+$   write pco line_in
+$   goto cfg_file_loop
+$ endif
+$!
+$! No substitution line
+$ line_in_len = f$length(line_in)
+$ if f$locate("@", line_in) .ge. line_in_len
+$ then
+$   write pco line_in
+$   goto cfg_file_loop
+$ endif
+$!
+$ if f$locate("@prefix@", line_in) .lt line_in_len
+$ then
+$    if kit_type .nes. "D"
+$    then
+$        write pco "prefix=/usr"
+$    else
+$        write pco "prefix=/beta"
+$    endif
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@exec_prefix@", line_in) .lt line_in_len
+$ then
+$    if kit_type .nes. "D"
+$    then
+$        write pco "exec_prefix=/usr"
+$    else
+$        write pco "exec_prefix=/beta"
+$    endif
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("=@includedir@", line_in) .lt line_in_len
+$ then
+$    write pco "includedir=$(prefix}/include"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("X@includedir@", line_in) .lt line_in_len
+$ then
+$    write pco "        if test ""X$(prefix}/include""; then"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("I@includedir@", line_in) .lt line_in_len
+$ then
+$    write pco "          echo "${CPPFLAG_CURL_STATICLIB}-I$(prefix}/include"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@CPPFLAG_CURL_STATICLIB@", line_in) .lt line_in_len
+$ then
+$    write pco "cppflag_curl_staticlib=-DCURL_STATICLIB"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@ENABLE_SHARED@", line_in) .lt line_in_len
+$ then
+$    write pco "        echo no"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@CURL_CA_BUNDLE@", line_in) .lt line_in_len
+$ then
+$    write pco "        echo """""
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@CC@", line_in) .lt line_in_len
+$ then
+$    write pco "        echo ""cc"""
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@SUPPORT_FEATURES@", line_in) .lt line_in_len
+$ then
+$    if arch_name .eqs. "VAX"
+$    then
+$        write pco "        for feature in SSL libz NTLM ""; do"
+$    else
+$        write pco "        for feature in SSL IPv6 libz NTLM ""; do"
+$    endif
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@SUPPORT_PROTOCOLS@", line_in) .lt line_in_len
+$ then
+$    proto1 = "DICT FILE FTP FTPS GOPHER HTTP HTTPS IMAP IMAPS"
+$    proto2 = " LDAP LDAPS POP3 POP3S RTSP SMTP SMTPS TELNET TFTP"
+$    proto = proto1 + proto2
+$    write pco "        for protocol in " + proto + "; do"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("libcurl @CURLVERSION@", line_in) .lt line_in_len
+$ then
+$    write pco "        echo libcurl ''curl_version'"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("existing @CURLVERSION@", line_in) .lt line_in_len
+$ then
+$    line_start = -
+  "          echo ""requested version $checkfor is newer than existing"
+$    write pco "''line_start' ''curl_version'"""
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("`echo @versionnum@", line_in) .lt line_in_len
+$ then
+$    write pco "        numuppercase=`echo ''version_num' | tr 'a-f' 'A-F'`"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate(" echo @versionnum@", line_in) .lt line_in_len
+$ then
+$    write pco "        echo ''version_num'"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("X@libdir@", line_in) .lt line_in_len
+$ then
+$    part1 = "        if test ""$(exec_prefix}/lib"" != ""X/usr/lib"""
+$    part2 = "-a ""X$(exec_prefix}/lib"" != ""X/usr/lib64""; then"
+$    write pco part1,part2
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("L@libdir@", line_in) .lt line_in_len
+$ then
+$    write pco "           CURLLIBDIR=""$(exec_prefix}/lib """
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@REQUIRE_LIB_DEPS@", line_in) .lt line_in_len
+$ then
+$    write pco "        if test "Xyes" = "Xyes"; then"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@LIBCURL_LIBS@", line_in) .lt line_in_len
+$ then
+$    if arch_name .eqs. "VAX"
+$    then
+$        write pco "          echo ${CURLLIBDIR}-lssl -lcrypto -lz"
+$    else
+$        write pco "          echo ${CURLLIBDIR}-lssl -lcrypto -lgssapi -lz"
+$    endif
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@ENABLE_STATIC@", line_in) .lt line_in_len
+$ then
+$    write pco "        if test "Xyes" != "Xno" ; then"
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@LIBCURL_LIBS@", line_in) .lt line_in_len
+$ then
+$    part1 = "          echo ${exec_prefix}/lib/libcurl.a"
+$    part2 = "-L/usr/lib -L/SSL_LIB"
+$    if arch_name .eqs. "VAX"
+$    then
+$        write pco "''part1' ''part2' -lssl -lcrypto -lz"
+$    else
+$        write pco "''part1' ''part2' -lssl -lcrypto -lgssapi -lz"
+$    endif
+$    goto cfg_file_loop
+$ endif
+$ if f$locate("@CONFIGURE_OPTIONS@", line_in) .lt line_in_len
+$ then
+$    if kit_type .nes. "D"
+$    then
+$        part1 = "        echo "" '--prefix=/usr' '--exec-prefix=/usr' "
+$    else
+$        part1 = "        echo "" '--prefix=/beta' '--exec_prefix=/beta' "
+$    endif
+$    if arch_name .eqs. "VAX"
+$    then
+$        part3 = ""
+$    else
+$        part3 = "'--with-gssapi' "
+$    endif
+$    part2 = "'--disable-dependency-tracking' '--disable-libtool-lock' "
+$    part4 = "'--disable-ntlm-wb' '--with-ca-path=gnv$curl_ca_path'"""
+$!
+$    write pco part1,part2,part3,part4
+$!
+$    goto cfg_file_loop
+$ endif
+$!
+$pc_file_loop_end:
+$ close pco
+$ close pci
+$!
+$all_exit:
+$ exit
diff --git a/packages/vms/build_gnv_curl.com b/packages/vms/build_gnv_curl.com
new file mode 100644
index 000000000..1eaa7d5f3
--- /dev/null
+++ b/packages/vms/build_gnv_curl.com
@@ -0,0 +1,38 @@
+$! File: build_gnv_curl.com
+$!
+$! $Id$
+$!
+$! All in one build procedure
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$!
+$! 11-Jun-2009	J. Malmberg
+$!-----------------------------------------------------------------------
+$!
+$ @setup_gnv_curl_build.com
+$!
+$ bash gnv_curl_configure.sh
+$!
+$ @clean_gnv_curl.com
+$!
+$ bash make_gnv_curl_install.sh
+$!
+$ @gnv_link_curl.com
+$!
+$ purge new_gnu:[*...]/log
+$!
+$!
+$exit
diff --git a/packages/vms/build_gnv_curl_pcsi_desc.com b/packages/vms/build_gnv_curl_pcsi_desc.com
new file mode 100644
index 000000000..572b9b8ba
--- /dev/null
+++ b/packages/vms/build_gnv_curl_pcsi_desc.com
@@ -0,0 +1,488 @@
+$! File: Build_GNV_CURL_PCSI_DESC.COM
+$!
+$! $Id$
+$!
+$! Build the *.pcsi$text file in the following sections:
+$!   Required software dependencies.
+$!   install/upgrade/postinstall steps.
+$!      1. Duplicate filenames need an alias procedure. (N/A for curl)
+$!      2. ODS-5 filenames need an alias procedure. (N/A for curl)
+$!      3. Special alias links for executables (curl. -> curl.exe)
+$!         if a lot, then an alias procedure is needed.
+$!      4. Rename the files to lowercase.
+$!   Move Release Notes to destination
+$!   Source kit option
+$!   Create directory lines
+$!   Add file lines for curl.
+$!   Add Link alias procedure file (N/A for curl)
+$!   Add [.SYS$STARTUP]curl_startup file
+$!   Add Release notes file.
+$!
+$! The file PCSI_GNV_CURL_FILE_LIST.TXT is read in to get the files other
+$! than the release notes file and the source backup file.
+$!
+$! The PCSI system can really only handle ODS-2 format filenames and
+$! assumes that there is only one source directory.  It also assumes that
+$! all destination files with the same name come from the same source file.
+$! Fortunately CURL does not trip most of these issues, so those steps
+$! above are marked N/A.
+$!
+$! A rename action section is needed to make sure that the files are
+$! created in the GNV$GNU: in the correct case, and to create the alias
+$! link [usr.bin]curl. for [usr.bin]curl.exe.
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$!
+$! 15-Jun-2009  J. Malmberg
+$!
+$!===========================================================================
+$!
+$ kit_name = f$trnlnm("GNV_PCSI_KITNAME")
+$ if kit_name .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$ producer = f$trnlnm("GNV_PCSI_PRODUCER")
+$ if producer .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$ filename_base = f$trnlnm("GNV_PCSI_FILENAME_BASE")
+$ if filename_base .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$!
+$!
+$! Parse the kit name into components.
+$!---------------------------------------
+$ producer = f$element(0, "-", kit_name)
+$ base = f$element(1, "-", kit_name)
+$ product = f$element(2, "-", kit_name)
+$ mmversion = f$element(3, "-", kit_name)
+$ majorver = f$extract(0, 3, mmversion)
+$ minorver = f$extract(3, 2, mmversion)
+$ updatepatch = f$element(4, "-", kit_name)
+$ if updatepatch .eqs. "-" then updatepatch = ""
+$!
+$! kit type of "D" means a daily build
+$ kit_type = f$edit(f$extract(0, 1, majorver), "upcase")
+$!
+$!
+$ product_line = "product ''producer' ''base' ''product'"
+$ if updatepatch .eqs. ""
+$ then
+$     product_name = " ''majorver'.''minorver'"
+$ else
+$     product_name = " ''majorver'.''minorver'-''updatepatch'"
+$ endif
+$ product_line = product_line + " ''product_name' full;"
+$!write sys$output product_line
+$!
+$!
+$!
+$! Create the file as a VMS text file.
+$!----------------------------------------
+$ base_file = kit_name
+$ create 'base_file'.pcsi$desc
+$!
+$!
+$! Start building file.
+$!----------------------
+$ open/append pdsc 'base_file'.pcsi$desc
+$!
+$ write pdsc product_line
+$!
+$! Required product dependencies.
+$!----------------------------------
+$ vmsprd = "DEC"
+$ if base .eqs. "I64VMS" then vmsprd = "HP"
+$!
+$ write pdsc "   software ''vmsprd' ''base' VMS ;"
+$ arch_type = f$getsyi("ARCH_NAME")
+$ node_swvers = f$getsyi("node_swvers")
+$ vernum = f$extract(1, f$length(node_swvers), node_swvers)
+$ majver = f$element(0, ".", vernum)
+$ minverdash = f$element(1, ".", vernum)
+$ minver = f$element(0, "-", minverdash)
+$ dashver = f$element(1, "-", minverdash)
+$ if dashver .eqs. "-" then dashver = ""
+$ vmstag = majver + minver + dashver
+$ code = f$extract(0, 1, arch_type)
+$ arch_code = f$extract(0, 1, arch_type)
+$ write pdsc -
+ "   if (not <software ''vmsprd' ''base' VMS version minimum ''node_swvers'>) ;"
+$ write pdsc "      error NEED_VMS''vmstag';"
+$ write pdsc "   end if;"
+$!
+$write pdsc "   software VMSPORTS ''base' ZLIB ;"
+$write pdsc -
+    "   if (not <software VMSPORTS ''base' ZLIB version minimum V1.2-8>) ;"
+$write pdsc "      error NEED_ZLIB;"
+$write pdsc "   end if;"
+$!
+$!
+$!
+$! install/upgrade/postinstall steps.
+$!-----------------------------------
+$!      1. Duplicate filenames need an alias procedure. (N/A for curl)
+$!      2. ODS-5 filenames need an alias procedure. (N/A for curl)
+$!      3. Special alias links for executables (curl. -> curl.exe)
+$!         if a lot, then an alias procedure is needed.
+$!      4. Rename the files to lowercase.
+$!
+$!
+$!   Alias links needed.
+$!-------------------------
+$ add_alias_lines = ""
+$ rem_alias_lines = ""
+$ line_out = ""
+$!
+$!   Read through the file list to set up aliases and rename commands.
+$!---------------------------------------------------------------------
+$ open/read flst pcsi_gnv_curl_file_list.txt
+$!
+$inst_alias_loop:
+$   read/end=inst_alias_loop_end flst line_in
+$   line_in = f$edit(line_in,"compress,trim,uncomment")
+$   if line_in .eqs. "" then goto inst_alias_loop
+$   pathname = f$element(0, " ", line_in)
+$   linkflag = f$element(1, " ", line_in)
+
+$   if linkflag .nes. "->" then goto inst_alias_write
+$!
+$   linktarget = f$element(2, " ", line_in)
+$   if kit_type .eqs. "D"
+$   then
+$       old_start = f$locate("[gnv.usr", pathname)
+$       if old_start .lt. f$length(pathname)
+$       then
+$           pathname = "[gnv.beta" + pathname - "[gnv.usr"
+$           linktarget = "[gnv.beta" + linktarget - "[gnv.usr"
+$       endif
+$   endif
+$   nlink = "pcsi$destination:" + pathname
+$   ntarg = "pcsi$destination:" + linktarget
+$   new_add_alias_line = -
+  """if f$search(""""''nlink'"""") .eqs. """""""" then" + -
+  " set file/enter=''nlink' ''ntarg'"""
+$   if add_alias_lines .nes. ""
+$   then
+$       add_alias_lines = add_alias_lines + "," + new_add_alias_line
+$   else
+$       add_alias_lines = new_add_alias_line
+$   endif
+$!
+$   new_rem_alias_line = -
+  """if f$search(""""''nlink'"""") .nes. """""""" then" + -
+  " set file/remove ''nlink';"""
+$   if rem_alias_lines .nes. ""
+$   then
+$      rem_alias_lines = rem_alias_lines + "," + new_rem_alias_line
+$   else
+$      rem_alias_lines = new_rem_alias_line
+$   endif
+$!
+$   goto inst_alias_loop
+$!
+$inst_alias_write:
+$!
+$!  execute install / remove
+$   write pdsc "   execute install ("
+$! add aliases
+$   i = 0
+$ex_ins_loop:
+$       line = f$element(i, ",", add_alias_lines)
+$       i = i + 1
+$       if line .eqs. "" then goto ex_ins_loop
+$       if line .eqs. "," then goto ex_ins_loop_end
+$       if line_out .nes. "" then write pdsc line_out,","
+$       line_out = line
+$       goto ex_ins_loop
+$ex_ins_loop_end:
+$   write pdsc line_out
+$   line_out = ""
+$   write pdsc "      )"
+$   write pdsc "   remove ("
+$! remove aliases
+$   i = 0
+$ex_rem_loop:
+$       line = f$element(i, ",", rem_alias_lines)
+$       i = i + 1
+$       if line .eqs. "" then goto ex_rem_loop
+$       if line .eqs. "," then goto ex_rem_loop_end
+$       if line_out .nes. "" then write pdsc line_out,","
+$       line_out = line
+$       goto ex_rem_loop
+$ex_rem_loop_end:
+$   write pdsc line_out
+$   line_out = ""
+$   write pdsc "      ) ;"
+$!
+$!  execute upgrade
+$   write pdsc "   execute upgrade ("
+$   i = 0
+$ex_upg_loop:
+$       line = f$element(i, ",", rem_alias_lines)
+$       i = i + 1
+$       if line .eqs. "" then goto ex_upg_loop
+$       if line .eqs. "," then goto ex_upg_loop_end
+$       if line_out .nes. "" then write pdsc line_out,","
+$       line_out = line
+$       goto ex_upg_loop
+$ex_upg_loop_end:
+$   write pdsc line_out
+$   line_out = ""
+$! remove aliases
+$   write pdsc "      ) ;"
+$!
+$!  execute postinstall
+$   write pdsc "   execute postinstall ("
+$   if arch_code .nes. "V"
+$   then
+$       line_out = "   ""set process/parse=extended"""
+$   endif
+$   i = 0
+$ex_pins_loop:
+$       line = f$element(i, ",", add_alias_lines)
+$       i = i + 1
+$       if line .eqs. "" then goto ex_pins_loop
+$       if line .eqs. "," then goto ex_pins_loop_end
+$       if line_out .nes. "" then write pdsc line_out,","
+$       line_out = line
+$       goto ex_pins_loop
+$ex_pins_loop_end:
+$   if line_out .eqs. "" then line_out = "   ""continue"""
+$!   write pdsc line_out
+$!   line_out = ""
+$! add aliases and follow with renames.
+$!
+$goto inst_dir
+$!
+$inst_dir_loop:
+$   read/end=inst_alias_loop_end flst line_in
+$   line_in = f$edit(line_in,"compress,trim,uncomment")
+$   if line_in .eqs. "" then goto inst_dir_loop
+$inst_dir:
+$   pathname = f$element(0, " ", line_in)
+$   if kit_type .eqs. "D"
+$   then
+$       if pathname .eqs. "[gnv]usr.dir"
+$       then
+$           pathname = "[gnv]beta.dir"
+$       else
+$           old_start = f$locate("[gnv.usr", pathname)
+$           if old_start .lt. f$length(pathname)
+$           then
+$               pathname = "[gnv.beta" + pathname - "[gnv.usr"
+$           endif
+$       endif
+$   endif
+$!
+$!  Ignore the directory entries for now.
+$!-----------------------------------------
+$   filedir = f$parse(pathname,,,"DIRECTORY")
+$   if pathname .eqs. filedir then goto inst_dir_loop
+$!
+$!  process .dir extensions for rename
+$!  If this is not a directory then start processing files.
+$!-------------------------
+$   filetype = f$parse(pathname,,,"TYPE")
+$   filetype_u = f$edit(filetype, "upcase")
+$   filename = f$parse(pathname,,,"NAME")
+$   if filetype_u .nes. ".DIR" then goto inst_file
+$!
+$!  process directory lines for rename.
+$!--------------------------------------
+$   if line_out .nes. ""
+$   then
+$       write pdsc line_out,","
+$       line_out = ""
+$   endif
+$   if arch_code .nes. "V"
+$   then
+$       if line_out .nes. "" then write pdsc line_out,","
+$       line_out = "   ""rename pcsi$destination:''pathname' ''filename'.DIR"""
+$   else
+$       if line_out .nes. "" then write pdsc line_out
+$       line_out = ""
+$   endif
+$   goto inst_dir_loop
+$!
+$!
+$!   process file lines for rename
+$!---------------------------------
+$inst_file_loop:
+$   read/end=inst_alias_loop_end flst line_in
+$   line_in = f$edit(line_in,"compress,trim,uncomment")
+$   if line_in .eqs. "" then goto inst_dir_loop
+$   pathname = f$element(0, " ", line_in)
+$   if kit_type .eqs. "D"
+$   then
+$       if pathname .eqs. "[gnv]usr.dir"
+$       then
+$           pathname = "[gnv]beta.dir"
+$       else
+$           old_start = f$locate("[gnv.usr", pathname)
+$           if old_start .lt. f$length(pathname)
+$           then
+$               pathname = "[gnv.beta" + pathname - "[gnv.usr"
+$           endif
+$       endif
+$   endif
+$!
+$!  Filenames with $ in them are VMS special and do not need to be lowercased.
+$!  --------------------------------------------------------------------------
+$   if f$locate("$", pathname) .lt. f$length(pathname) then goto inst_file_loop
+$!
+$   filetype = f$parse(pathname,,,"TYPE")
+$   filename = f$parse(pathname,,,"NAME") + filetype
+$inst_file:
+$   if arch_code .nes. "V"
+$   then
+$       if line_out .nes. "" then write pdsc line_out,","
+$       filetype = f$parse(pathname,,,"TYPE")
+$       filename = f$parse(pathname,,,"NAME") + filetype
+$       line_out = "   ""rename pcsi$destination:''pathname' ''filename'"""
+$   else
+$       if line_out .nes. "" then write pdsc line_out
+$       line_out = ""
+$   endif
+$   goto inst_file_loop
+$!
+$inst_alias_loop_end:
+$!
+$write pdsc line_out
+$write pdsc "        ) ;"
+$close flst
+$!
+$!   Move Release Notes to destination
+$!-------------------------------------
+$write pdsc "   information RELEASE_NOTES phase after ;"
+$!
+$!   Source kit option
+$!---------------------
+$write pdsc "   option SOURCE default 0;"
+$write pdsc "   directory ""[gnv.common_src]"" PROTECTION PUBLIC ;"
+$write pdsc -
+    "        file ""[gnv.common_src]''filename_base'_original_src.bck"""
+$write pdsc -
+    "          source [common_src]''filename_base'_original_src.bck ;"
+$if f$search("gnv$gnu:[vms_src]''filename_base'_vms_src.bck") .nes. ""
+$then
+$    write pdsc "   directory ""[gnv.vms_src]"" PROTECTION PUBLIC ;"
+$    write pdsc "        file ""[gnv.vms_src]''filename_base'_vms_src.bck"""
+$    write pdsc "          source [vms_src]''filename_base'_vms_src.bck ;"
+$endif
+$write pdsc "   end option;"
+$!
+$!
+$! Read through the file list again.
+$!----------------------------------
+$open/read flst pcsi_gnv_curl_file_list.txt
+$!
+$!
+$!   Create directory lines
+$!-------------------------
+$flst_dir_loop:
+$   read/end=flst_loop_end flst line_in
+$   line_in = f$edit(line_in,"compress,trim,uncomment")
+$   if line_in .eqs. "" then goto flst_dir_loop
+$!
+$   filename = f$element(0, " ", line_in)
+$   linkflag = f$element(1, " ", line_in)
+$   if linkflag .eqs. "->" then goto flst_dir_loop
+$!
+$!  Ignore .dir extensions
+$!-------------------------
+$   filetype = f$edit(f$parse(filename,,,"TYPE"), "upcase")
+$   if filetype .eqs. ".DIR" then goto flst_dir_loop
+$!
+$   destname = filename
+$   if kit_type .eqs. "D"
+$   then
+$       old_start = f$locate("[gnv.usr", destname)
+$       if old_start .lt. f$length(destname)
+$       then
+$           destname = "[gnv.beta" + destname - "[gnv.usr"
+$       endif
+$   endif
+$!
+$!  It should be just a directory then.
+$!-------------------------------------
+$   filedir = f$edit(f$parse(filename,,,"DIRECTORY"), "lowercase")
+$!  If this is not a directory then start processing files.
+$!---------------------------------------------------------
+$   if filename .nes. filedir then goto flst_file
+$!
+$   write pdsc "   directory ""''destname'"" PROTECTION PUBLIC ;"
+$   goto flst_dir_loop
+$!
+$!
+$!   Add file lines for curl.
+$!---------------------------
+$flst_file_loop:
+$   read/end=flst_loop_end flst line_in
+$   line_in = f$edit(line_in,"compress,trim,uncomment")
+$   if line_in .eqs. "" then goto inst_file_loop
+$   filename = f$element(0, " ", line_in)
+$   destname = filename
+$   if kit_type .eqs. "D"
+$   then
+$       old_start = f$locate("[gnv.usr", destname)
+$       if old_start .lt. f$length(destname)
+$       then
+$           destname = "[gnv.beta" + destname - "[gnv.usr"
+$       endif
+$   endif
+$flst_file:
+$   srcfile = filename - "gnv."
+$   write pdsc "   file ""''destname'"" "
+$   write pdsc "     source ""''srcfile'"" ;"
+$   goto flst_file_loop
+$!
+$flst_loop_end:
+$ close flst
+$!
+$!   Add Link alias procedure file (N/A for curl)
+$!------------------------------------------------
+$!
+$!   Add [.SYS$STARTUP]curl_startup file
+$!---------------------------------------
+$ if kit_type .eqs. "D"
+$ then
+$   write pdsc "   file ""[sys$startup]curl_daily_startup.com"""
+$ else
+$   write pdsc "   file ""[sys$startup]curl_startup.com"""
+$ endif
+$ write pdsc "     source [usr.lib]curl_startup.com ;"
+$!
+$!   Add Release notes file.
+$!------------------------------
+$ write pdsc -
+    "   file ""[SYSHLP]''filename_base'.release_notes"" release notes ;"
+$!
+$! Close the product file
+$!------------------------
+$ write pdsc "end product;"
+$!
+$close pdsc
+$!
+$all_exit:
+$ exit
diff --git a/packages/vms/build_gnv_curl_pcsi_text.com b/packages/vms/build_gnv_curl_pcsi_text.com
new file mode 100644
index 000000000..df98f6301
--- /dev/null
+++ b/packages/vms/build_gnv_curl_pcsi_text.com
@@ -0,0 +1,198 @@
+$! File: Build_GNV_curl_pcsi_text.com
+$!
+$! $Id$
+$!
+$! Build the *.pcsi$text file from the four components:
+$!    1. Generated =product header section
+$!    2. [--]readme. file from the Curl distribution, modified to fit
+$!       a pcsi$text file format.
+$!    3. [--]copying file from the Curl distribution, modified to fit
+$!       a pcsi$text file format.
+$!    4. Generated Producer section.
+$!
+$! Set the name of the release notes from the GNV_PCSI_FILENAME_BASE
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$!
+$! 15-Jun-2009  J. Malmberg
+$!
+$!===========================================================================
+$!
+$ kit_name = f$trnlnm("GNV_PCSI_KITNAME")
+$ if kit_name .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$ producer = f$trnlnm("GNV_PCSI_PRODUCER")
+$ if producer .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$ producer_full_name = f$trnlnm("GNV_PCSI_PRODUCER_FULL_NAME")
+$ if producer_full_name .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$!
+$!
+$! Parse the kit name into components.
+$!---------------------------------------
+$ producer = f$element(0, "-", kit_name)
+$ base = f$element(1, "-", kit_name)
+$ product = f$element(2, "-", kit_name)
+$ mmversion = f$element(3, "-", kit_name)
+$ majorver = f$extract(0, 3, mmversion)
+$ minorver = f$extract(3, 2, mmversion)
+$ updatepatch = f$element(4, "-", kit_name)
+$ if updatepatch .eqs. "-" then updatepatch = ""
+$!
+$!
+$ product_line = "=product ''producer' ''base' ''product'"
+$ if updatepatch .eqs. ""
+$ then
+$     product_name = " ''majorver'.''minorver'"
+$ else
+$     product_name = " ''majorver'.''minorver'-''updatepatch'"
+$ endif
+$ product_line = product_line + " ''product_name' full"
+$!
+$!
+$! If this is VAX and the file is on NFS, the names may be mangled.
+$!-----------------------------------------------------------------
+$ readme_file = ""
+$ if f$search("[--]readme.") .nes. ""
+$ then
+$   readme_file = "[--]readme."
+$ else
+$   if f$search("[--]$README.") .nes. ""
+$   then
+$       readme_file = "[--]$README."
+$   else
+$       write sys$output "Can not find readme file."
+$       goto all_exit
+$   endif
+$ endif
+$ copying_file = ""
+$ if f$search("[--]copying.") .nes. ""
+$ then
+$   copying_file = "[--]copying."
+$ else
+$   if f$search("[--]$COPYING.") .nes. ""
+$   then
+$       copying_file = "[--]$COPYING."
+$   else
+$       write sys$output "Can not find copying file."
+$       goto all_exit
+$   endif
+$ endif
+$!
+$! Create the file as a VMS text file.
+$!----------------------------------------
+$ base_file = kit_name
+$ create 'base_file'.pcsi$text
+$!
+$!
+$! Start building file.
+$!----------------------
+$ open/append ptxt 'base_file'.pcsi$text
+$ write ptxt product_line
+$!
+$!
+$! First insert the Readme file.
+$!
+$ open/read rf 'readme_file'
+$!
+$ write ptxt "1 'PRODUCT"
+$ write ptxt "=prompt ''producter' ''product' for OpenVMS"
+$!
+$rf_loop:
+$   read/end=rf_loop_end rf line_in
+$   if line_in .nes. ""
+$   then
+$!    PCSI files use the first character in for their purposes.
+$!--------------------------------------------------------------
+$     first_char = f$extract(0, 1, line_in)
+$     if first_char .nes. " " then line_in = " " + line_in
+$   endif
+$   write ptxt line_in
+$   goto rf_loop
+$rf_loop_end:
+$ close rf
+$!
+$!
+$! Now add in the copying file
+$!--------------------------------
+$ write ptxt ""
+$ write ptxt "1 'NOTICE"
+$ write ptxt ""
+$!
+$ open/read cf 'copying_file'
+$!
+$cf_loop:
+$   read/end=cf_loop_end cf line_in
+$   if line_in .nes. ""
+$   then
+$!    PCSI files use the first character in for their purposes.
+$!--------------------------------------------------------------
+$     first_char = f$extract(0, 1, line_in)
+$     if first_char .nes. " " then line_in = " " + line_in
+$   endif
+$   write ptxt line_in
+$   goto cf_loop
+$cf_loop_end:
+$ close cf
+$!
+$! Now we need the rest of the boiler plate.
+$!--------------------------------------------
+$ write ptxt ""
+$ write ptxt "1 'PRODUCER"
+$ write ptxt "=prompt ''producer_full_name'"
+$ write ptxt -
+ "This software product is provided by ''producer_full_name' with no warranty."
+$!
+$ arch_type = f$getsyi("ARCH_NAME")
+$ node_swvers = f$getsyi("node_swvers")
+$ vernum = f$extract(1, f$length(node_swvers), node_swvers)
+$ majver = f$element(0, ".", vernum)
+$ minverdash = f$element(1, ".", vernum)
+$ minver = f$element(0, "-", minverdash)
+$ dashver = f$element(1, "-", minverdash)
+$ if dashver .eqs. "-" then dashver = ""
+$ vmstag = majver + minver + dashver
+$ code = f$extract(0, 1, arch_type)
+$!
+$ write ptxt "1 NEED_VMS''vmstag'"
+$ write ptxt -
+   "=prompt OpenVMS ''vernum' or later is not installed on your system."
+$ write ptxt "This product requires OpenVMS ''vernum' or later to function."
+$ write ptxt "1 NEED_ZLIB"
+$ write ptxt "=prompt ZLIB 1.2-8 or later is not installed on your system."
+$ write ptxt "This product requires ZLIB 1.2-8 or later to function."
+$ write ptxt "1 SOURCE"
+$ write ptxt "=prompt Source modules for ''product'"
+$ write ptxt "The Source modules for ''product' will be installed."
+$ write ptxt "1 RELEASE_NOTES"
+$ write ptxt "=prompt Release notes are available in the [SYSHLP] directory."
+$!
+$ close ptxt
+$!
+$!
+$!
+$all_exit:
+$ exit
diff --git a/packages/vms/build_gnv_curl_release_notes.com b/packages/vms/build_gnv_curl_release_notes.com
new file mode 100644
index 000000000..dbe43d96b
--- /dev/null
+++ b/packages/vms/build_gnv_curl_release_notes.com
@@ -0,0 +1,90 @@
+$! File: Build_GNV_curl_release_notes.com
+$!
+$! $Id$
+$!
+$! Build the release note file from the four components:
+$!    1. The curl_release_note_start.txt
+$!    2. The hp_ssl_release_info.txt
+$!    3. [--]readme. file from the Curl distribution.
+$!    4. The Curl_gnv-build_steps.txt.
+$!
+$! Set the name of the release notes from the GNV_PCSI_FILENAME_BASE
+$! logical name.
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$! 14-Jun-2009  J. Malmberg
+$!
+$!===========================================================================
+$!
+$ base_file = f$trnlnm("GNV_PCSI_FILENAME_BASE")
+$ if base_file .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$!
+$!
+$ curl_readme = f$search("sys$disk:[--]readme.")
+$ if curl_readme .eqs. ""
+$ then
+$   curl_readme = f$search("sys$disk:[--]$README.")
+$ endif
+$ if curl_readme .eqs. ""
+$ then
+$    write sys$output "Can not find Curl readme file."
+$    goto all_exit
+$ endif
+$!
+$ curl_copying = f$search("sys$disk:[--]copying.")
+$ if curl_copying .eqs. ""
+$ then
+$   curl_copying = f$search("sys$disk:[--]$COPYING.")
+$ endif
+$ if curl_copying .eqs. ""
+$ then
+$    write sys$output "Can not find Curl copying file."
+$    goto all_exit
+$ endif
+$!
+$ vms_readme = f$search("sys$disk:[]readme.")
+$ if vms_readme .eqs. ""
+$ then
+$   vms_readme = f$search("sys$disk:[]$README.")
+$ endif
+$ if vms_readme .eqs. ""
+$ then
+$   write sys$output "Can not find VMS specific Curl readme file."
+$   goto all_exit
+$ endif
+$!
+$ if f$search("sys$disk:[]hp_ssl_release_info.txt") .eqs. ""
+$ then
+$   write sys$output "GNV_LINK_CURL.COM has not been run!"
+$   goto all_exit
+$ endif
+$!
+$ type/noheader 'curl_readme', 'vms_readme', -
+                sys$disk:[]curl_release_note_start.txt, -
+                sys$disk:[]hp_ssl_release_info.txt, -
+                'curl_copying', -
+                sys$disk:[]curl_gnv_build_steps.txt -
+                /out='base_file'.release_notes
+$!
+$ purge 'base_file'.release_notes
+$ rename 'base_file.release_notes ;1
+$!
+$all_exit:
+$ exit
diff --git a/packages/vms/build_libcurl_pc.com b/packages/vms/build_libcurl_pc.com
new file mode 100644
index 000000000..251b345b1
--- /dev/null
+++ b/packages/vms/build_libcurl_pc.com
@@ -0,0 +1,205 @@
+$! File: build_libcurl_pc.com
+$!
+$! $Id:$
+$!
+$! Build the libcurl.pc file from the libcurl.pc.in file
+$!
+$! Copyright 2013, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$!
+$! 15-Jun-2013  J. Malmberg
+$!
+$!===========================================================================
+$!
+$! Skip this if the libcurl.pc already exists.
+$ if f$search("[--]libcurl.pc") .nes. "" then goto all_exit
+$!
+$! Need to know the kit type.
+$ kit_name = f$trnlnm("GNV_PCSI_KITNAME")
+$ if kit_name .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$!
+$!
+$! Parse the kit name into components.
+$!---------------------------------------
+$ producer = f$element(0, "-", kit_name)
+$ base = f$element(1, "-", kit_name)
+$ product = f$element(2, "-", kit_name)
+$ mmversion = f$element(3, "-", kit_name)
+$ majorver = f$extract(0, 3, mmversion)
+$ minorver = f$extract(3, 2, mmversion)
+$ updatepatch = f$element(4, "-", kit_name)
+$ if updatepatch .eqs. "-" then updatepatch = ""
+$!
+$! kit type of "D" means a daily build
+$ kit_type = f$edit(f$extract(0, 1, majorver), "upcase")
+$!
+$ pc_file_in = "[--]libcurl^.pc.in"
+$!
+$ if f$search(pc_file_in) .eqs. ""
+$ then
+$    pc_file_in = "[--]libcurl.pc$5nin"
+$    if f$search(pc_file_in) .eqs. ""
+$    then
+$        pc_file_in = "[--]libcurl.pc_in"
+$        if f$search(pc_file_in) .eqs. ""
+$        then
+$            write sys$output "Can not find libcurl.pc.in."
+$            goto all_exit
+$        endif
+$    endif
+$ endif
+$!
+$ if (f$getsyi("HW_MODEL") .lt. 1024)
+$ then
+$    arch_name = "VAX"
+$ else
+$    arch_name = ""
+$    arch_name = arch_name + f$edit(f$getsyi("ARCH_NAME"), "UPCASE")
+$    if (arch_name .eqs. "") then arch_name = "UNK"
+$ endif
+$!
+$!
+$ curl_version = "0.0.0"
+$ open/read vf [--.src]version.h
+$version_loop:
+$   read vf/end=version_loop_end line_in
+$   if line_in .eqs. "" then goto version_loop
+$   key = f$element(0, " ", line_in)
+$   if key .nes. "#define" then goto version_loop
+$   name = f$element(1, " ", line_in)
+$   if name .eqs. "VERSION"
+$   then
+$       curl_version = f$element(2, " ", line_in) - """" - """"
+$   else
+$       goto version_loop
+$   endif
+$version_loop_end:
+$ close vf
+$!
+$!
+$ create [--]libcurl.pc
+$ open/append pco [--]libcurl.pc
+$ open/read pci 'pc_file_in'
+$pc_file_loop:
+$ read pci/end=pc_file_loop_end line_in
+$!
+$! blank lines
+$ if line_in .eqs. ""
+$ then
+$   write pco ""
+$   goto pc_file_loop
+$ endif
+$!
+$! comment lines
+$ key = f$extract(0, 1, line_in)
+$ if key .eqs. "#"
+$ then
+$   write pco line_in
+$   goto pc_file_loop
+$ endif
+$!
+$! Special handling for libs.
+$ if f$locate("Libs:", line_in) .eq. 0
+$ then
+$   write pco "#",line_in
+$   goto pc_file_loop
+$ endif
+$! No substitution line
+$ line_in_len = f$length(line_in)
+$ if f$locate("@", line_in) .ge. line_in_len
+$ then
+$   write pco line_in
+$   goto pc_file_loop
+$ endif
+$!
+$ if f$locate("@prefix@", line_in) .lt line_in_len
+$ then
+$    if kit_type .nes. "D"
+$    then
+$        write pco "prefix=/usr"
+$    else
+$        write pco "prefix=/beta"
+$    endif
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@exec_prefix@", line_in) .lt line_in_len
+$ then
+$    if kit_type .nes. "D"
+$    then
+$        write pco "exec_prefix=/usr"
+$    else
+$        write pco "exec_prefix=/beta"
+$    endif
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@libdir@", line_in) .lt line_in_len
+$ then
+$    write pco "libdir=$(exec_prefix}/lib"
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@includedir@", line_in) .lt line_in_len
+$ then
+$    write pco "includedir=$(prefix}/include"
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@SUPPORT_PROTOCOLS@", line_in) .lt line_in_len
+$ then
+$    proto1 = "DICT FILE FTP FTPS GOPHER HTTP HTTPS IMAP IMAPS"
+$    proto2 = " LDAP LDAPS POP3 POP3S RTSP SMTP SMTPS TELNET TFTP"
+$    proto = proto1 + proto2
+$    write pco "supported_protocols=""" + proto + """"
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@SUPPORT_FEATURES@", line_in) .lt line_in_len
+$ then
+$    if arch_name .eqs. "VAX"
+$    then
+$        write pco "supported_features=""SSL libz NTLM"""
+$    else
+$        write pco "supported_features=""SSL IPv6 libz NTLM"""
+$    endif
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@CURLVERSION@", line_in) .lt line_in_len
+$ then
+$    write pco "Version: ''curl_version'"
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@LIBCURL_LIBS@", line_in) .lt line_in_len
+$ then
+$    if arch_name .eqs. "VAX"
+$    then
+$        write pco "Libs.private: -lssl -lcrypto -lz"
+$    else
+$        write pco "Libs.private: -lssl -lcrypto -lgssapi -lz"
+$    endif
+$    goto pc_file_loop
+$ endif
+$ if f$locate("@CPPFLAG_CURL_STATICLIB@", line_in) .lt line_in_len
+$ then
+$    write pco "Cflags: -I${includedir} -DCURL_STATICLIB"
+$    goto pc_file_loop
+$ endif
+$!
+$pc_file_loop_end:
+$ close pco
+$ close pci
+$!
+$all_exit:
+$ exit
diff --git a/packages/vms/compare_curl_source.com b/packages/vms/compare_curl_source.com
new file mode 100644
index 000000000..7df4bedef
--- /dev/null
+++ b/packages/vms/compare_curl_source.com
@@ -0,0 +1,379 @@
+$! Compare_curl_source.com
+$!
+$! $Id$
+$!
+$! This procedure compares the files in two directories and reports the
+$! differences.  It is customized for the vmsports repository layout.
+$!
+$! It needs to be customized to the local site directories.
+$!
+$! This is used by me for these purposes:
+$!     1. Compare the original source of a project with an existing
+$!        VMS port.
+$!     2. Compare the checked out repository of a project with the
+$!        the local working copy to make sure they are in sync.
+$!     3. Keep a copy directory up to date.  The third is needed by
+$!        me because VMS Backup can create a saveset of files from a
+$!        NFS mounted volume.
+$!
+$! First the files in the original source directory which is assumed to be
+$! under source codde control are compared with the copy directory.
+$!
+$! Then the files are are only in the copy directory are listed.
+$!
+$! The result will five diagnostics about of files:
+$!    1. Files that are not generation 1.
+$!    2. Files missing in the copy directory.
+$!    3. Files in the copy directory not in the source directory.
+$!    4. Files different from the source directory.
+$!    5. Files that VMS DIFF can not process.
+$!
+$! This needs to be run on an ODS-5 volume.
+$!
+$! If UPDATE is given as a second parameter, files missing or different in the
+$! copy directory will be updated.
+$!
+$! By default:
+$!    The directory src_root:[project_name] will be translated to something like
+$!    DISK:[dir.dir.reference.project_name] and this will be used
+$!    to calculate DISK:[dir.dir.vms_source.project_name] for the VMS specific
+$!    source directory.
+$!
+$!    The copy directory is vms_root:[project_name]
+$!    The UPDATE parameter is ignored.
+$!
+$!    This setting is used to make sure that the working vms directory
+$!    and the CVS checkout directory have the same contents.
+$!
+$! If P1 is "SRCBCK" then this
+$!     The source directory tree is: src_root:[project_name]
+$!     The copy directory is src_root1:[project_name]
+$!
+$!   src_root1:[project_name] is used by me to work around that VMS backup will
+$!   not use NFS as a source directory so I need to make a copy.
+$!
+$!   This is to make sure that the backup save set for the unmodified
+$!   source is up to date.
+$!
+$!   If your CVS checkout is not on an NFS mounted volume, you do not
+$!   need to use this option or have the logical name src_root1 defined.
+$!
+$! If P1 is "VMSBCK" then this changes the two directories:
+$!    The source directory is vms_root:[project_name]
+$!    The copy directory is vms_root1:[project_name]
+$!
+$!   vms_root:[project_name] is where I do the VMS specific edits.
+$!   vms_root1:[project_name] is used by me to work around that VMS backup will
+$!   not use NFS as a source directory so I need to make a copy.
+$!
+$!   This is to make sure that the backup save set for the unmodified
+$!   source is up to date.
+$!
+$! Copyright 2011, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$! 18-Aug-2011  J. Malmberg
+$!==========================================================================
+$!
+$! Update missing/changed files.
+$ update_file = 0
+$ if (p2 .eqs. "UPDATE")
+$ then
+$   update_file = 1
+$ endif
+$!
+$ myproc = f$environment("PROCEDURE")
+$ myprocdir = f$parse(myproc,,,"DIRECTORY") - "[" - "]" - "<" - ">"
+$ myprocdir = f$edit(myprocdir, "LOWERCASE")
+$ mydefault = f$environment("DEFAULT")
+$ mydir = f$parse(mydefault,,,"DIRECTORY")
+$ mydir = f$edit(mydir, "LOWERCASE")
+$ odelim = f$extract(0, 1, mydir)
+$ mydir = mydir - "[" - "]" - "<" - ">"
+$ mydev = f$parse(mydefault,,,"DEVICE")
+$!
+$ ref = ""
+$ if P1 .eqs. ""
+$ then
+$   ref_base_dir = myprocdir
+$   wrk_base_dir = mydir
+$   update_file = 0
+$   resultd = f$parse("src_root:",,,,"NO_CONCEAL")
+$   resultd = f$edit(resultd, "LOWERCASE")
+$   resultd = resultd - "][" - "><" - ".;" - ".."
+$   resultd_len = f$length(resultd) - 1
+$   delim = f$extract(resultd_len, 1, resultd)
+$   ref_root_base = mydir + delim
+$   resultd = resultd - ref_root_base - "reference." + "vms_source."
+$   ref = resultd + ref_base_dir
+$   wrk = "VMS_ROOT:" + odelim + wrk_base_dir
+$   resultd_len = f$length(resultd) - 1
+$   resultd = f$extract(0, resultd_len, resultd) + delim
+$   ref_root_dir = f$parse(resultd,,,"DIRECTORY")
+$   ref_root_dir = f$edit(ref_root_dir, "LOWERCASE")
+$   ref_root_dir = ref_root_dir - "[" - "]"
+$   ref_base_dir = ref_root_dir + "." + ref_base_dir
+$ endif
+$!
+$ if p1 .eqs. "SRCBCK"
+$ then
+$   ref_base_dir = "curl"
+$   wrk_base_dir = "curl"
+$   ref = "src_root:[" + ref_base_dir
+$   wrk = "src_root1:[" + wrk_base_dir
+$   if update_file
+$   then
+$       if f$search("src_root1:[000000]curl.dir") .eqs. ""
+$       then
+$           create/dir/prot=o:rwed src_root1:[curl]
+$       endif
+$   endif
+$ endif
+$!
+$!
+$ if p1 .eqs. "VMSBCK"
+$ then
+$   ref_base_dir = "curl"
+$   wrk_base_dir = "curl"
+$   ref = "vms_root:[" + ref_base_dir
+$   wrk = "vms_root1:[" + wrk_base_dir
+$   if update_file
+$   then
+$       if f$search("vms_root1:[000000]curl.dir") .eqs. ""
+$       then
+$           create/dir/prot=o:rwed vms_root1:[curl]
+$       endif
+$   endif
+$ endif
+$!
+$!
+$ if ref .eqs. ""
+$ then
+$   write sys$output "Unknown compare type specified!"
+$   exit 44
+$ endif
+$!
+$!
+$! Future - check the device types involved for the
+$! the syntax to check.
+$ ODS2_SYNTAX = 0
+$ NFS_MANGLE = 0
+$ PWRK_MANGLE = 0
+$!
+$ vax = f$getsyi("HW_MODEL") .lt. 1024
+$ if vax
+$ then
+$   ODS2_SYNTAX = 1
+$ endif
+$!
+$ report_missing = 1
+$!
+$ if .not. ODS2_SYNTAX
+$ then
+$   set proc/parse=extended
+$ endif
+$!
+$loop:
+$   ref_spec = f$search("''ref'...]*.*;",1)
+$   if ref_spec .eqs. "" then goto loop_end
+$!
+$   ref_dev = f$parse(ref_spec,,,"DEVICE")
+$   ref_dir = f$parse(ref_spec,,,"DIRECTORY")
+$   ref_dir = f$edit(ref_dir, "LOWERCASE")
+$   ref_name = f$parse(ref_spec,,,"NAME")
+$   ref_type = f$parse(ref_spec,,,"TYPE")
+$!
+$!
+$   if f$locate(".CVS]", ref_dir) .lt. f$length(ref_dir) then goto loop
+$
+$   rel_path = ref_dir - "[" - ref_base_dir
+$!  rel_path_len = f$length(rel_path) - 1
+$!  delim = f$extract(rel_path_len, 1, rel_path)
+$!  rel_path = rel_path - ".]" - ".>" - "]" - ">"
+$!  rel_path = rel_path + delim
+$!
+$   if ODS2_SYNTAX
+$   then
+$!       if rel_path .eqs. ".examples.scripts^.noah]"
+$!       then
+$!           rel_path = ".examples.scripts_noah]"
+$!       endif
+$!       if rel_path .eqs. ".examples.scripts^.v2]"
+$!       then
+$!           rel_path = ".examples.scripts_v2]"
+$!       endif
+$   endif
+$!
+$   wrk_path = wrk + rel_path
+$!
+$   ref_name_type = ref_name + ref_type
+$!
+$   if ODS2_SYNTAX
+$   then
+$   endif
+$!
+$   wrk_spec = wrk_path + ref_name_type
+$!
+$!
+$   wrk_chk = f$search(wrk_spec, 0)
+$   if wrk_chk .eqs. ""
+$   then
+$       if report_missing
+$       then
+$           write sys$output "''wrk_spec' is missing"
+$        endif
+$        if update_file
+$        then
+$            copy/log 'ref_spec' 'wrk_spec'
+$        endif
+$        goto loop
+$   endif
+$!
+$   wrk_name = f$parse(wrk_spec,,,"NAME")
+$   wrk_type = f$parse(wrk_spec,,,"TYPE")
+$   wrk_fname = wrk_name + wrk_type"
+$   ref_fname = ref_name + ref_type
+$!
+$   if ref_fname .nes. wrk_fname
+$   then
+$       write sys$output "''wrk_spc' wrong name, should be ""''ref_fname'"""
+$   endif
+$!
+$   ref_type = f$edit(ref_type, "UPCASE")
+$   if ref_type .eqs. ".DIR" then goto loop
+$!
+$   if ODS2_SYNTAX
+$   then
+$       ref_fname = f$edit(ref_fname, "LOWERCASE")
+$   endif
+$!
+$!  These files are in the wrong format for VMS diff, and we don't change them.
+$   ref_skip = 0
+$   if ref_type .eqs. ".PDF" then ref_skip = 1
+$   if ref_type .eqs. ".HTML" then ref_skip = 1
+$   if ref_type .eqs. ".HQX" then ref_skip = 1
+$   if ref_type .eqs. ".P12" then ref_skip = 1
+$   if ref_type .eqs. "."
+$   then
+$       if f$locate("test", ref_fname) .eq. 0 then ref_skip = 1
+$       if ref_fname .eqs. "configure." then ref_skip = 1
+$   endif
+$   if ref_fname .eqs. "MACINSTALL.TXT" then ref_skip = 1
+$   if ref_fname .eqs. "$macinstall.txt" then ref_skip = 1
+$   if ref_fname .eqs. "curl.mcp$5nxml$5nsit$5nhqx" then ref_skip = 1
+$   if ref_fname .eqs. "curl_GUSIConfig.cpp" then ref_skip = 1
+$   if ref_fname .eqs. "curl_$gusic$onfig.cpp" then ref_skip = 1
+$   if ref_fname .eqs. "macos_main.cpp" then ref_skip = 1
+$!
+$!
+$   if ref_skip .ne. 0
+$   then
+$      if report_missing
+$      then
+$          write sys$output "Skipping diff of ''ref_fname'"
+$      endif
+$      goto loop
+$   endif
+$!
+$!
+$   wrk_ver = f$parse(wrk_chk,,,"VERSION")
+$   if wrk_ver .nes. ";1"
+$   then
+$       write sys$output "Version for ''wrk_spec' is not 1"
+$   endif
+$   set noon
+$   diff/out=nl: 'wrk_spec' 'ref_spec'
+$   if $severity .nes. "1"
+$   then
+$       write sys$output "''wrk_spec' is different from ''ref_spec'"
+$       if update_file
+$       then
+$           delete 'wrk_spec';*
+$           copy/log 'ref_spec' 'wrk_spec'
+$       endif
+$   endif
+$   set on
+$
+$!
+$   goto loop
+$loop_end:
+$!
+$!
+$missing_loop:
+$!  For missing loop, check the latest generation.
+$   ref_spec = f$search("''wrk'...]*.*;")
+$   if ref_spec .eqs. "" then goto missing_loop_end
+$!
+$   ref_dev = f$parse(ref_spec,,,"DEVICE")
+$   ref_dir = f$parse(ref_spec,,,"DIRECTORY")
+$   ref_dir = f$edit(ref_dir, "LOWERCASE")
+$   ref_name = f$parse(ref_spec,,,"NAME")
+$   ref_type = f$parse(ref_spec,,,"TYPE")
+$   ref_name_type = ref_name + ref_type
+$!
+$   rel_path = ref_dir - "[" - wrk_base_dir
+$!
+$!
+$   wrk_path = ref + rel_path
+$   wrk_spec = wrk_path + ref_name + ref_type
+$   wrk_name = f$parse(wrk_spec,,,"NAME")
+$   wrk_type = f$parse(wrk_spec,,,"TYPE")
+$!
+$   wrk_fname = wrk_name + wrk_type"
+$   ref_fname = ref_name + ref_type
+$!
+$   wrk_skip = 0
+$   ref_utype = f$edit(ref_type,"UPCASE")
+$   ref_ufname = f$edit(ref_fname,"UPCASE")
+$   if ref_ufname .eqs. "CVS.DIR" then wrk_skip = 1
+$   if ref_fname .eqs. ".cvsignore" then wrk_skip = 1
+$   if ref_fname .eqs. "Entries." then wrk_skip = 1
+$   if ref_fname .eqs. "Repository." then wrk_skip = 1
+$   if ref_fname .eqs. "Root." then wrk_skip = 1
+$!
+$!
+$   if wrk_skip .eq. 0
+$   then
+$       wrk_chk = f$search(wrk_spec, 0)
+$       if wrk_chk .eqs. ""
+$       then
+$           if report_missing
+$           then
+$               write sys$output "''wrk_spec' is missing"
+$           endif
+$           goto missing_loop
+$       endif
+$   else
+$       goto missing_loop
+$   endif
+$!
+$   if ref_fname .nes. wrk_fname
+$   then
+$       write sys$output "''wrk_spc' wrong name, should be ""''ref_fname'"""
+$   endif
+$!
+$   if ref_utype .eqs. ".DIR" then goto missing_loop
+$!
+$   wrk_ver = f$parse(wrk_chk,,,"VERSION")
+$   if wrk_ver .nes. ";1"
+$   then
+$      write sys$output "Version for ''wrk_spec' is not 1"
+$   endif
+$!
+$   goto missing_loop
+$!
+$!
+$missing_loop_end:
+$!
+$exit
diff --git a/packages/vms/curl_release_note_start.txt b/packages/vms/curl_release_note_start.txt
new file mode 100644
index 000000000..977dce12e
--- /dev/null
+++ b/packages/vms/curl_release_note_start.txt
@@ -0,0 +1,77 @@
+From file: CURL_RELEASE_NOTE_START.TXT
+
+Note: These kits are produced by a hobbyist and are providing any support
+or any commitment to supply bug fixes or future releases.  This code is
+as-is with no warrantees.
+
+The testing of this build of curl was minimal and involved building some of
+the sample and test programs, accessing a public HTTPS: website, doing a
+form post of some VMS test files, and FTP upload of some text files.
+
+Due to the way that PCSI identifies packages, if you install a package from
+one producer and then want to upgrade it from another producer, you will
+probably need to uninstall the previous package first.
+
+OpenVMS specific building and kitting instructions are after the standard
+curl readme file.
+
+This product may be available for your platform in a PCSI kit.  The source kit
+contains files for building CURL using GNV or with a DCL procedure.
+
+The GNV based build creates a libcurl share imaged which is supplied in the
+PCSI kit.
+
+This version of CURL will return VMS compatible status codes when run from
+DCL and Unix compatible exit codes and messages when run with the SHELL
+environment variable set.
+
+This port of Curl uses the OpenSSL, Ldap, and Kerberos V5 that are bundled
+with OpenVMS or supplied as updates by HP.  Ldap and Kerberos are not available
+on the VAX platform.  See section below for a special note about HP OpenSSL
+on Alpha and IA64.
+
+The supplied CURL_STARTUP.COM procedure that is installed in
+[VMS$COMMON.SYS$STARTUP] can be put in your VMS startup procedure to install
+the GNV$LIBCURL shared image and create logical names GNV$LIBCURL to reference
+it.  It will create the GNV$CURL_INCLUDE logical name for build procedures
+to access the header files.
+
+Normally to use curl from DCL, just create a foreign command as:
+   curl :== $gnv$gnu:[usr.bin]gnv$curl.exe
+
+If you need to work around having the older HP SSL kit installed, then
+for DCL create this command procedure:
+
+ $ create/dir gnv$gnu:[vms_bin]/prot=w:re
+ $ create gnv$gnu:[vms_bin]curl.com
+ $ curl := $gnv$gnu:[usr.bin]gnv$curl.exe
+ $ define/user ssl$libcrypto_shr32 gnv$curl_ssl_libcryptoshr32
+ $ curl "''p1'" "''p2'" "''p3'" "''p4'" "''p5'" "''p6'" "''p7'" "''p8'"
+ ^Z
+
+Then you can use: curl :== @gnv$gnu:[vms_bin]curl.com to run curl.
+
+For the HP SSL work around to work for GNV do the following:
+ $ create/dir gnv$gnu:[usr.local.bin]/prot=w:re
+ $ create gnv$gnu:[usr.local.bin]curl.
+ #! /bin/sh
+ dcl @gnv\$gnu:[vms_bin]curl.com $*
+ ^Z
+
+Similar work arounds will be needed for any program linked with GNV$LIBCURL
+until the HP OpenSSL is upgraded to the current 1.4 version or later.
+
+If you are installing a "daily" build instead of a release build of Curl, some
+things have been changed so that it can be installed at the same time as
+a production build with out conflicts.
+
+   The CURL_DAILY_STARTUP.COM will be supplied instead of CURL_STARTUP.COM.
+   This file is actually not used with the daily package and is provided as
+   a preview of what the next CURL_STARTUP.COM will be for the next release.
+   Do not run it.
+
+   The files that are normally installed in [VMS$COMMON.GNV.usr], for the
+   daily build are installed in [VMS$COMMON.GNV.beta] directory.
+
+   To use the daily GNV$LIBCURL image, you will need to define the logical
+   name GNV$LIBCURL to the image.
diff --git a/packages/vms/curl_startup.com b/packages/vms/curl_startup.com
new file mode 100644
index 000000000..84760a0af
--- /dev/null
+++ b/packages/vms/curl_startup.com
@@ -0,0 +1,100 @@
+$! File: curl_Startup.com
+$!
+$! $Id$
+$!
+$! Procedure to setup the CURL libraries for use by programs from the
+$! VMS SYSTARTUP*.COM procedure.
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$! 15-Jun-2009 J. Malmberg
+$! 30-Jul-2013 J. Malmberg  Update for Curl 7.32
+$!========================================================================
+$!
+$!
+$! GNV$GNU if needed.
+$ if f$trnlnm("GNV$GNU") .eqs. ""
+$ then
+$   x = f$trnlnm("GNU","LNM$SYSTEM_TABLE")
+$   if x .eqs. ""
+$   then
+$       write sys$output "GNV must be started up before this procedure.
+$       exit 44
+$   endif
+$   define/system/exec/trans=conc GNV$GNU 'x'
+$ endif
+$!
+$!
+$ myproc = f$environment("procedure")
+$!
+$! ZLIB needed.
+$ if f$trnlnm("GNV$LIBZSHR32") .eqs. ""
+$ then
+$   zlib_startup = f$parse("gnv$zlib_startup.com;0", myproc,,,)
+$   if f$search(zlib_startup) .nes. ""
+$   then
+$       @'zlib_startup
+$   else
+$       write sys$output "ZLIB package not found and is required."
+$       exit 44
+$   endif
+$ endif
+$!
+$!
+$ curl_ssl_libcrypto32 = ""
+$ curl_ssl_libssl32 = ""
+$ gnv_ssl_libcrypto32 = "gnv$gnu:[lib]ssl$libcrypto_shr32.exe"
+$ gnv_ssl_libssl32 = "gnv$gnu:[lib]ssl$libssl_shr32.exe"
+$ if f$search(gnv_ssl_libcrypto32) .nes. ""
+$ then
+$   curl_ssl_libcrypto32 = gnv_ssl_libcrypto32
+$   curl_ssl_libssl32 = gnv_ssl_libssl32
+$ else
+$   hp_ssl_libcrypto32 = "sys$share:ssl$libcrypto_shr32.exe"
+$   hp_ssl_libssl32 = "sys$share:ssl$libssl_shr32.exe"
+$   if f$search(hp_ssl_libcrypto32) .nes. ""
+$   then
+$       curl_ssl_libcrypto32 = hp_ssl_libcrypto32
+$       curl_ssl_libssl32 = hp_ssl_libssl32
+$   else
+$       write sys$output "HP SSL package not found and is required."
+$   endif
+$ endif
+$!
+$ define/system/exec gnv$curl_ssl_libcryptoshr32 'curl_ssl_libcrypto32'
+$ define/system/exec gnv$curl_ssl_libsslshr32 'curl_ssl_libssl32'
+$!
+$!
+$! CURL setup
+$ define/system/exec gnv$libcurl gnv$gnu:[usr.lib]GNV$LIBCURL.EXE
+$ define/system/exec gnv$curl_include gnv$gnu:[usr.include.curl]
+$ if .not. f$file_attributes("gnv$libcurl", "known")
+$ then
+$   install ADD gnv$libcurl/OPEN/SHARE/HEADER
+$ else
+$   install REPLACE gnv$libcurl/OPEN/SHARE/HEADER
+$ endif
+$!
+$!
+$ curl_exe = "gnv$gnu:[usr.bin]gnv$curl.exe"
+$ if .not. f$file_attributes(curl_exe, "known")
+$ then
+$   install ADD 'curl_exe'/OPEN/SHARE/HEADER
+$ else
+$   install REPLACE 'curl_exe'/OPEN/SHARE/HEADER
+$ endif
+$!
+$all_exit:
+$ exit
diff --git a/packages/vms/make_pcsi_curl_kit_name.com b/packages/vms/make_pcsi_curl_kit_name.com
new file mode 100644
index 000000000..d896da281
--- /dev/null
+++ b/packages/vms/make_pcsi_curl_kit_name.com
@@ -0,0 +1,190 @@
+$! File: MAKE_PCSI_CURL_KIT_NAME.COM
+$!
+$! $Id$
+$!
+$! Calculates the PCSI kit name for use in building an installation kit.
+$! PCSI is HP's PolyCenter Software Installation Utility.
+$!
+$! The results are stored in as logical names so that other procedures
+$! can use them.
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$! 11-Jun-2009 J. Malmberg
+$!
+$!========================================================================
+$!
+$! Save default
+$ default_dir = f$environment("DEFAULT")
+$!
+$! Move to the base directories
+$ set def [--]
+$!
+$! Put things back on error.
+$ on warning then goto all_exit
+$!
+$! The producer is the name or common abbreviation for the entity that is
+$! making the kit.  It must be set as a logical name before running this
+$! procedure.
+$!
+$! HP documents the producer as the legal owner of the software, but for
+$! open source work, it should document who is creating the package for
+$! distribution.
+$!
+$ producer = f$trnlnm("GNV_PCSI_PRODUCER")
+$ if producer .eqs. ""
+$ then
+$   write sys$output "The logical name GNV_PCSI_PRODUCER needs to be defined."
+$   write sys$output "This should be set to the common abbreviation or name of"
+$   write sys$output "the entity creating this kit.  If you are an individual"
+$   write sys$output "then use your initials."
+$   goto all_exit
+$ endif
+$ producer_full_name = f$trnlnm("GNV_PCSI_PRODUCER_FULL_NAME")
+$ if producer_full_name .eqs. ""
+$ then
+$   write sys$output "The logical name GNV_PCSI_PRODUCER_FULL_NAME needs to"
+$   write sys$output "be defined.  This should be set to the full name of"
+$   write sys$output "the entity creating this kit.  If you are an individual"
+$   write sys$output "then use your name."
+$   write sys$output "EX: DEFINE GNV_PCSI_PRODUCER_FULL_NAME ""First M. Last"""
+$   goto all_exit
+$ endif
+$!
+$ write sys$output "*****"
+$ write sys$output "***** Producer = ''producer'"
+$ write sys$output "*****"
+$!
+$!
+$! Base is one of 'VMS', 'AXPVMS', 'I64VMS', 'VAXVMS' and indicates what
+$! binaries are in the kit.  A kit with just 'VMS' can be installed on all
+$! architectures.
+$!
+$ base = "VMS"
+$ arch_type = f$getsyi("ARCH_NAME")
+$ code = f$extract(0, 1, arch_type)
+$ if (code .eqs. "I") then base = "I64VMS"
+$ if (code .eqs. "V") then base = "VAXVMS"
+$ if (code .eqs. "A") then base = "AXPVMS"
+$!
+$!
+$ product = "curl"
+$!
+$!
+$! We need to get the version from curlver_h.  It will have a line like
+$! #define LIBCURL_VERSION "7.31.0"
+$!   or
+$! #define LIBCURL_VERSION "7.32.0-20130731".
+$!
+$! The dash indicates that this is a daily pre-release.
+$!
+$!
+$ open/read/error=version_loop_end vhf [.include.curl]curlver.h
+$ version_loop:
+$   read vhf line_in
+$   if line_in .eqs. "" then goto version_loop
+$   if f$locate("#define LIBCURL_VERSION ", line_in) .ne. 0
+$   then
+$       goto version_loop
+$   endif
+$   raw_version = f$element(2," ", line_in) - """" - """"
+$ version_loop_end:
+$ close vhf
+$!
+$!
+$ eco_level = ""
+$ if f$search("''default_dir'vms_eco_level.h") .nes. ""
+$ then
+$   open/read ef 'default_dir'vms_eco_level.h
+$ecolevel_loop:
+$       read/end=ecolevel_loop_end ef line_in
+$       prefix = f$element(0, " ", line_in)
+$       if prefix .nes. "#define" then goto ecolevel_loop
+$       key = f$element(1, " ", line_in)
+$       value = f$element(2, " ", line_in) - """" - """"
+$       if key .eqs. "VMS_ECO_LEVEL"
+$       then
+$           eco_level = "''value'"
+$           if eco_level .eqs. "0"
+$           then
+$               eco_level = ""
+$           else
+$               eco_level = "E" + eco_level
+$           endif
+$           goto ecolevel_loop_end
+$       endif
+$       goto ecolevel_loop
+$ecolevel_loop_end:
+$   close ef
+$ endif
+$!
+$!
+$! This translates to V0732-0 or D0732-0
+$! We encode the snapshot date into the version as an ECO since a daily
+$! can never have an ECO.
+$!
+$! version_type = 'V' for a production release, and 'D' for a build from a
+$! daiy CVS snapshot.
+$ majorver = f$element(0, ".", raw_version)
+$ minorver = f$element(1, ".", raw_version)
+$ raw_update = f$element(2, ".", raw_version)
+$ update = f$element(0, "-", raw_update)
+$ if update .eqs. "0" then update = ""
+$ daily_tag = f$element(1, "-", raw_update)
+$ vtype = "V"
+$ patch = ""
+$ if daily_tag .nes. "-"
+$ then
+$   vtype = "D"
+$   daily_tag_len = f$length(daily_tag)
+$   daily_tag = f$extract(4, daily_tag_len - 4, daily_tag)
+$   patch = vtype + daily_tag
+$   product = product + "_d"
+$ else
+$   daily_tag = ""
+$   if eco_level .nes. "" then patch = eco_level
+$ endif
+$!
+$!
+$ version_fao = "!2ZB!2ZB"
+$ mmversion = f$fao(version_fao, 'majorver', 'minorver')
+$ version = vtype + "''mmversion'"
+$ if update .nes. "" .or. patch .nes. ""
+$ then
+$!  The presence of a patch implies an update
+$   if update .eqs. "" .and. patch .nes. "" then update = "0"
+$   version = version + "-" + update + patch
+$   fversion = version
+$ else
+$   fversion = version
+$   version = version + "-"
+$ endif
+$!
+$! Kit type 1 is complete kit, the only type that this procedure will make.
+$ kittype = 1
+$!
+$! Write out a logical name for the resulting base kit name.
+$ name = "''producer'-''base'-''product'-''version'-''kittype'"
+$ define GNV_PCSI_KITNAME "''name'"
+$ fname = "''product'-''fversion'"
+$ define GNV_PCSI_FILENAME_BASE "''fname'"
+$ write sys$output "*****"
+$ write sys$output "***** GNV_PCSI_KITNAME = ''name'."
+$ write sys$output "***** GNV_PCSI_FILENAME_BASE = ''fname'."
+$ write sys$output "*****"
+$!
+$all_exit:
+$ set def 'default_dir'
+$ exit '$status'
diff --git a/packages/vms/pcsi_gnv_curl_file_list.txt b/packages/vms/pcsi_gnv_curl_file_list.txt
new file mode 100644
index 000000000..ab5b633dc
--- /dev/null
+++ b/packages/vms/pcsi_gnv_curl_file_list.txt
@@ -0,0 +1,127 @@
+! File: PCSI_GNV_CURL_FILE_LIST.TXT
+!
+! $Id$
+!
+! File list for building a PCSI kit.
+! Very simple format so that the parsing logic can be simple.
+! links first, directory second, and files third.
+!
+! link -> file tells procedure to create/remove a link on install/uninstall
+! If more than one link, consider using an alias file.
+!
+! [xxx.yyy]foo.dir is a directory file for the rename phase.
+! [xxx.yyy.foo] is a directory file for the create phase.
+! Each subdirectory needs to be on its own pair of lines.
+!
+! [xxx.yyy]file.ext is a file for the rename and add phases.
+!
+! Copyright 2009, John Malmberg
+!
+! Permission to use, copy, modify, and/or distribute this software for any
+! purpose with or without fee is hereby granted, provided that the above
+! copyright notice and this permission notice appear in all copies.
+!
+! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+!
+! 15-Jun-2009  J. Malmberg
+!============================================================================
+[gnv.usr.bin]curl. -> [gnv.usr.bin]gnv$curl.exe
+[gnv.usr.bin]curl.exe -> [gnv.usr.bin]gnv$curl.exe
+[gnv]
+[000000]gnv.dir
+[gnv.usr]
+[gnv]usr.dir
+[gnv.usr]bin.dir
+[gnv.usr.bin]
+[gnv.usr]include.dir
+[gnv.usr.include]
+[gnv.usr.include]curl.dir
+[gnv.usr.include.curl]
+[gnv.usr]lib.dir
+[gnv.usr.lib]
+[gnv.usr.lib]pkgconfig.dir
+[gnv.usr.lib.pkgconfig]
+[gnv.usr]share.dir
+[gnv.usr.share]
+[gnv.usr.share]man.dir
+[gnv.usr.share.man]
+[gnv.usr.share.man]man1.dir
+[gnv.usr.share.man.man1]
+[gnv.usr.share.man]man3.dir
+[gnv.usr.share.man.man3]
+[gnv.usr.bin]curl-config.
+[gnv.usr.bin]gnv$curl.exe
+[gnv.usr.include.curl]curl.h
+[gnv.usr.include.curl]curlbuild.h
+[gnv.usr.include.curl]curlrules.h
+[gnv.usr.include.curl]curlver.h
+[gnv.usr.include.curl]easy.h
+[gnv.usr.include.curl]mprintf.h
+[gnv.usr.include.curl]multi.h
+[gnv.usr.include.curl]stdcheaders.h
+[gnv.usr.include.curl]typecheck-gcc.h
+[gnv.usr.lib]gnv$libcurl.exe
+[gnv.usr.lib]gnv$curlmsg.exe
+[gnv.usr.lib.pkgconfig]libcurl.pc
+[gnv.usr.share.man.man1]curl-config.1
+[gnv.usr.share.man.man1]curl.1
+[gnv.usr.share.man.man3]curl_easy_cleanup.3
+[gnv.usr.share.man.man3]curl_easy_duphandle.3
+[gnv.usr.share.man.man3]curl_easy_escape.3
+[gnv.usr.share.man.man3]curl_easy_getinfo.3
+[gnv.usr.share.man.man3]curl_easy_init.3
+[gnv.usr.share.man.man3]curl_easy_pause.3
+[gnv.usr.share.man.man3]curl_easy_perform.3
+[gnv.usr.share.man.man3]curl_easy_recv.3
+[gnv.usr.share.man.man3]curl_easy_reset.3
+[gnv.usr.share.man.man3]curl_easy_send.3
+[gnv.usr.share.man.man3]curl_easy_setopt.3
+[gnv.usr.share.man.man3]curl_easy_strerror.3
+[gnv.usr.share.man.man3]curl_easy_unescape.3
+[gnv.usr.share.man.man3]curl_escape.3
+[gnv.usr.share.man.man3]curl_formadd.3
+[gnv.usr.share.man.man3]curl_formfree.3
+[gnv.usr.share.man.man3]curl_formget.3
+[gnv.usr.share.man.man3]curl_free.3
+[gnv.usr.share.man.man3]curl_getdate.3
+[gnv.usr.share.man.man3]curl_getenv.3
+[gnv.usr.share.man.man3]curl_global_cleanup.3
+[gnv.usr.share.man.man3]curl_global_init.3
+[gnv.usr.share.man.man3]curl_global_init_mem.3
+[gnv.usr.share.man.man3]curl_mprintf.3
+[gnv.usr.share.man.man3]curl_multi_add_handle.3
+[gnv.usr.share.man.man3]curl_multi_assign.3
+[gnv.usr.share.man.man3]curl_multi_cleanup.3
+[gnv.usr.share.man.man3]curl_multi_fdset.3
+[gnv.usr.share.man.man3]curl_multi_info_read.3
+[gnv.usr.share.man.man3]curl_multi_init.3
+[gnv.usr.share.man.man3]curl_multi_perform.3
+[gnv.usr.share.man.man3]curl_multi_remove_handle.3
+[gnv.usr.share.man.man3]curl_multi_setopt.3
+[gnv.usr.share.man.man3]curl_multi_socket.3
+[gnv.usr.share.man.man3]curl_multi_socket_action.3
+[gnv.usr.share.man.man3]curl_multi_strerror.3
+[gnv.usr.share.man.man3]curl_multi_timeout.3
+[gnv.usr.share.man.man3]curl_multi_wait.3
+[gnv.usr.share.man.man3]curl_share_cleanup.3
+[gnv.usr.share.man.man3]curl_share_init.3
+[gnv.usr.share.man.man3]curl_share_setopt.3
+[gnv.usr.share.man.man3]curl_share_strerror.3
+[gnv.usr.share.man.man3]curl_slist_append.3
+[gnv.usr.share.man.man3]curl_slist_free_all.3
+[gnv.usr.share.man.man3]curl_strequal.3
+[gnv.usr.share.man.man3]curl_unescape.3
+[gnv.usr.share.man.man3]curl_version.3
+[gnv.usr.share.man.man3]curl_version_info.3
+[gnv.usr.share.man.man3]libcurl-easy.3
+[gnv.usr.share.man.man3]libcurl-errors.3
+[gnv.usr.share.man.man3]libcurl-multi.3
+[gnv.usr.share.man.man3]libcurl-share.3
+[gnv.usr.share.man.man3]libcurl-tutorial.3
+[gnv.usr.share.man.man3]libcurl.3
diff --git a/packages/vms/pcsi_product_gnv_curl.com b/packages/vms/pcsi_product_gnv_curl.com
new file mode 100644
index 000000000..38a1a99b3
--- /dev/null
+++ b/packages/vms/pcsi_product_gnv_curl.com
@@ -0,0 +1,171 @@
+$! File: PCSI_PRODUCT_GNV_CURL.COM
+$!
+$! $Id$
+$!
+$! This command file packages up the product CURL into a sequential
+$! format kit
+$!
+$! Copyright 2009, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$! 16-Jun-2009  J.Malmberg
+$!
+$!=========================================================================
+$!
+$! Save default
+$ default_dir = f$environment("DEFAULT")
+$!
+$! Put things back on error.
+$ on warning then goto all_exit
+$!
+$!
+$ can_build = 1
+$ producer = f$trnlnm("GNV_PCSI_PRODUCER")
+$ if producer .eqs. ""
+$ then
+$   write sys$output "GNV_PCSI_PRODUCER logical name has not been set."
+$   can_build = 0
+$ endif
+$ producer_full_name = f$trnlnm("GNV_PCSI_PRODUCER_FULL_NAME")
+$ if producer_full_name .eqs. ""
+$ then
+$   write sys$output -
+        "GNV_PCSI_PRODUCER_FULL_NAME logical name has not been set."
+$   can_build = 0
+$ endif
+$ stage_root_name = f$trnlnm("STAGE_ROOT")
+$ if stage_root_name .eqs. ""
+$ then
+$   write sys$output "STAGE_ROOT logical name has not been set."
+$   can_build = 0
+$ endif
+$!
+$ if (can_build .eq. 0)
+$ then
+$    write sys$output "Not able to build a kit."
+$    goto all_exit
+$ endif
+$!
+$! Make sure that the kit name is up to date for this build
+$!----------------------------------------------------------
+$ @MAKE_PCSI_CURL_KIT_NAME.COM
+$!
+$! Make sure that the release note file name is up to date
+$!---------------------------------------------------------
+$ @BUILD_GNV_CURL_RELEASE_NOTES.COM
+$!
+$!
+$! Make sure that the source has been backed up.
+$!----------------------------------------------
+$ arch_type = f$getsyi("ARCH_NAME")
+$ arch_code = f$extract(0, 1, arch_type)
+$ @backup_gnv_curl_src.com
+$!
+$! Regenerate the PCSI description file.
+$!--------------------------------------
+$ @BUILD_GNV_CURL_PCSI_DESC.COM
+$!
+$! Regenerate the PCSI Text file.
+$!---------------------------------
+$ @BUILD_GNV_CURL_PCSI_TEXT.COM
+$!
+$!
+$! Parse the kit name into components.
+$!---------------------------------------
+$ kit_name = f$trnlnm("GNV_PCSI_KITNAME")
+$ if kit_name .eqs. ""
+$ then
+$   write sys$output "@MAKE_PCSI_CURL_KIT_NAME.COM has not been run."
+$   goto all_exit
+$ endif
+$ producer = f$element(0, "-", kit_name)
+$ base = f$element(1, "-", kit_name)
+$ product_name = f$element(2, "-", kit_name)
+$ mmversion = f$element(3, "-", kit_name)
+$ majorver = f$extract(0, 3, mmversion)
+$ minorver = f$extract(3, 2, mmversion)
+$ updatepatch = f$element(4, "-", kit_name)
+$ if updatepatch .eqs. "" then updatepatch = ""
+$!
+$ version_fao = "!AS.!AS"
+$ mmversion = f$fao(version_fao, "''majorver'", "''minorver'")
+$ if updatepatch .nes. ""
+$ then
+$   version = "''mmversion'" + "-" + updatepatch
+$ else
+$   version = "''mmversion'"
+$ endif
+$!
+$!
+$! Move to the base directories
+$ set def [--]
+$ current_default = f$environment("DEFAULT")
+$ my_dir = f$parse(current_default,,,"DIRECTORY") - "[" - "<" - ">" - "]"
+$!
+$!
+$ source = "''default_dir'"
+$ src1 = "new_gnu:[usr.bin],"
+$ src2 = "new_gnu:[usr.include.curl],"
+$ src3 = "new_gnu:[usr.lib],"
+$ src4 = "new_gnu:[usr.lib.pkgconfig],"
+$ src5 = "new_gnu:[usr.share.man.man1],"
+$ src6 = "new_gnu:[usr.share.man.man3],"
+$ src7 = "new_gnu:[vms_src],"
+$ src8 = "new_gnu:[common_src],"
+$ src9 = "prj_root:[''my_dir'],prj_root:[''my_dir'.src]"
+$ gnu_src = src1 + src2 + src3 + src4 + src5 + src6 + src7 + src8 + src9
+$!
+$!
+$ base = ""
+$ arch_name = f$edit(f$getsyi("arch_name"),"UPCASE")
+$ if arch_name .eqs. "ALPHA" then base = "AXPVMS"
+$ if arch_name .eqs. "IA64" then base = "I64VMS"
+$ if arch_name .eqs. "VAX" then base = "VAXVMS"
+$!
+$ if base .eqs. "" then exit 44
+$!
+$ pcsi_option = "/option=noconfirm"
+$ if arch_code .eqs. "V"
+$ then
+$   pcsi_option = ""
+$ endif
+$!
+$!
+$product package 'product_name' -
+ /base='base' -
+ /producer='producer' -
+ /source='source' -
+ /destination=STAGE_ROOT:[KIT] -
+ /material=('gnu_src','source') -
+ /format=sequential 'pcsi_option'
+$!
+$!
+$! VAX can not do a compressed kit.
+$! ZIP -9 "-V" does a better job, so no reason to normally build a compressed
+$! kit.
+$!----------------------------------
+$if p1 .eqs. "COMPRESSED"
+$then
+$   if arch_code .nes. "V"
+$   then
+$       product copy /options=(novalidate, noconfirm) /format=compressed -
+        'product_name' -
+        /source=stage_root:[kit]/dest=stage_root:[kit] -
+        /version='version'/base='base'
+$   endif
+$endif
+$!
+$all_exit:
+$ set def 'default_dir'
+$ exit
diff --git a/packages/vms/stage_curl_install.com b/packages/vms/stage_curl_install.com
new file mode 100644
index 000000000..0dccdd6af
--- /dev/null
+++ b/packages/vms/stage_curl_install.com
@@ -0,0 +1,177 @@
+$! File: stage_curl_install.com
+$!
+$! $Id$
+$!
+$! This updates or removes the GNV$CURL.EXE and related files for the
+$! new_gnu:[*...] directory tree for running the self tests.
+$!
+$! The files installed/removed are:
+$!     [usr.bin]gnv$curl.exe
+$!     [usr.bin]curl-config.
+$!     [usr.lib]gnv$libcurl.exe
+$!     [usr.bin]curl. hard link for [usr.bin]gnv$curl.exe
+$!     [usr.include.curl]curl.h
+$!     [usr.include.curl]curlbuild.h
+$!     [usr.include.curl]curlrules.h
+$!     [usr.include.curl]curlver.h
+$!     [usr.include.curl]easy.h
+$!     [usr.include.curl]mprintf.h
+$!     [usr.include.curl]multi.h
+$!     [usr.include.curl]stdcheaders.h
+$!     [usr.include.curl]typecheck-gcc.h
+$!     [usr.lib.pkgconfig]libcurl.pc
+$!     [usr.share.man.man1]curl-config.1
+$!     [usr.share.man.man1]curl.1
+$!     [usr.share.man.man3]curl*.3
+$!     [usr.share.man.man3]libcurl*.3
+$! Future: A symbolic link to the release notes?
+$!
+$! Copyright 2012, John Malmberg
+$!
+$! Permission to use, copy, modify, and/or distribute this software for any
+$! purpose with or without fee is hereby granted, provided that the above
+$! copyright notice and this permission notice appear in all copies.
+$!
+$! THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+$! WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+$! MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+$! ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+$! WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+$! ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+$! OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+$!
+$!
+$! 20-Aug-2012  J. Malmberg
+$!
+$!===========================================================================
+$!
+$ arch_type = f$getsyi("ARCH_NAME")
+$ arch_code = f$extract(0, 1, arch_type)
+$!
+$ if arch_code .nes. "V"
+$ then
+$   set proc/parse=extended
+$ endif
+$!
+$!
+$! If the first parameter begins with "r" or "R" then this is to
+$! remove the files instead of installing them.
+$ remove_filesq = f$edit(p1, "upcase,trim")
+$ remove_filesq = f$extract(0, 1, remove_filesq)
+$ remove_files = 0
+$ if remove_filesq .eqs. "R" then remove_files = 1
+$!
+$!
+$! If we are staging files, make sure that the libcurl.pc and curl-config
+$! files are present.
+$ if remove_files .eq. 0
+$ then
+$   if f$search("[--]libcurl.pc") .eqs. ""
+$   then
+$       @build_libcurl_pc.com
+$   endif
+$   if f$search("[--]curl-config") .eqs. ""
+$   then
+$       @build_curl-config_script.com
+$   endif
+$ endif
+$!
+$!
+$! Dest dirs
+$!------------------
+$ dest_dirs1 = "[usr],[usr.bin],[usr.include],[usr.include.curl]"
+$ dest_dirs2 = ",[usr.bin],[usr.lib.pkgconfig],[usr.share]"
+$ dest_dirs3 = ",[usr.share.man],[usr.share.man.man1],[usr.share.man.man3]"
+$ dest_dirs = dest_dirs1 + dest_dirs2 + dest_dirs3
+$!
+$!
+$!   Alias links needed.
+$!-------------------------
+$ source_curl = "gnv$curl.exe"
+$ dest_curl = "[bin]gnv$curl.exe"
+$ curl_links = "[bin]curl."
+$ new_gnu = "new_gnu:"
+$!
+$!
+$! Create the directories if they do not exist
+$!---------------------------------------------
+$ i = 0
+$curl_dir_loop:
+$   this_dir = f$element(i, ",", dest_dirs)
+$   i = i + 1
+$   if this_dir .eqs. "" then goto curl_dir_loop
+$   if this_dir .eqs. "," then goto curl_dir_loop_end
+$!  Just create the directories, do not delete them.
+$!  --------------------------------------------------
+$   if remove_files .eq. 0
+$   then
+$       create/dir 'new_gnu''this_dir'/prot=(o:rwed)
+$   endif
+$   goto curl_dir_loop
+$curl_dir_loop_end:
+$!
+$!
+$! Need to add in the executable file
+$!-----------------------------------
+$ if remove_files .eq. 0
+$ then
+$   copy [--.src]curl.exe 'new_gnu'[usr.bin]gnv$curl.exe/prot=w:re
+$   copy [--]curl-config. 'new_gnu'[usr.bin]curl-config./prot=w:re
+$   copy sys$disk:[]gnv$libcurl.exe 'new_gnu'[usr.lib]gnv$libcurl.exe/prot=w:re
+$ endif
+$!
+$ if remove_files .eq. 0
+$ then
+$   set file/enter='new_gnu'[bin]curl. 'new_gnu'[usr.bin]gnv$curl.exe
+$ else
+$   file = "''new_gnu'[bin]curl."
+$   if f$search(file) .nes. "" then set file/remove 'file';*
+$ endif
+$!
+$!
+$ if remove_files .eq. 0
+$ then
+$   copy [--.include.curl]curl.h 'new_gnu'[usr.include.curl]curl.h
+$   copy [--.include.curl]curlbuild.h -
+         'new_gnu'[usr.include.curl]curlbuild.h
+$   copy [--.include.curl]curlrules.h -
+         'new_gnu'[usr.include.curl]curlrules.h
+$   copy [--.include.curl]curlver.h -
+         'new_gnu'[usr.include.curl]curlver.h
+$   copy [--.include.curl]easy.h -
+         'new_gnu'[usr.include.curl]easy.h
+$   copy [--.include.curl]mprintf.h -
+         'new_gnu'[usr.include.curl]mprintf.h
+$   copy [--.include.curl]multi.h -
+         'new_gnu'[usr.include.curl]multi.h
+$   copy [--.include.curl]stdcheaders.h -
+         'new_gnu'[usr.include.curl]stdcheaders.h
+$   copy [--.include.curl]typecheck-gcc.h -
+         'new_gnu'[usr.include.curl]typecheck-gcc.h
+$   copy [--]libcurl.pc 'new_gnu'[usr.lib.pkgconfig]libcurl.pc
+$!
+$   copy [--.docs]curl-config.1 'new_gnu'[usr.share.man.man1]curl-config.1
+$   copy [--.docs]curl.1 'new_gnu'[usr.share.man.man1]curl.1
+$!
+$   copy [--.docs.libcurl]*.3 -
+         'new_gnu'[usr.share.man.man3]*.3
+$!
+$ else
+$   file = "''new_gnu'[usr.bin]curl-config."
+$   if f$search(file) .nes. "" then delete 'file';*
+$   file = "''new_gnu'[usr.bin]gnv$curl.exe"
+$   if f$search(file) .nes. "" then delete 'file';*
+$   file = "''new_gnu'[usr.lib]gnv$libcurl.exe"
+$   if f$search(file) .nes. "" then delete 'file';*
+$   file = "''new_gnu'[usr.include.curl]*.h"
+$   if f$search(file) .nes. "" then delete 'file';*
+$   file = "''new_gnu'[usr.share.man.man1]curl-config.1"
+$   if f$search(file) .nes. "" then delete 'file';*
+$   file = "''new_gnu'[usr.share.man.man1]curl.1"
+$   if f$search(file) .nes. "" then delete 'file';*
+$   file = "''new_gnu'[usr.share.man.man3]curl*.3"
+$   if f$search(file) .nes. "" then delete 'file';*
+$   file = "''new_gnu'[usr.share.man.man3]libcurl*.3"
+$   if f$search(file) .nes. "" then delete 'file';*
+$ endif
+$!
diff --git a/packages/vms/vms_eco_level.h b/packages/vms/vms_eco_level.h
new file mode 100644
index 000000000..435340775
--- /dev/null
+++ b/packages/vms/vms_eco_level.h
@@ -0,0 +1,30 @@
+/* File: vms_eco_level.h
+ *
+ * $Id$
+ *
+ * Copyright 2012, John Malmberg
+ *
+ * Permission to use, copy, modify, and/or distribute this software for any
+ * purpose with or without fee is hereby granted, provided that the above
+ * copyright notice and this permission notice appear in all copies.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
+ * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
+ * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
+ * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
+ * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
+ * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT
+ * OF OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
+
+ */
+
+/* This file should be incremented for each ECO that is kit */
+/* for a specific cURL x.y-z release. */
+/* When any part of x.y-z is incremented, the ECO should be set back to 0 */
+
+#ifndef _VMS_ECO_LEVEL_H
+#define _VMS_ECO_LEVEL_H
+
+#define VMS_ECO_LEVEL "0"
+
+#endif