diff options
Diffstat (limited to 'src/tool_operate.c')
| -rw-r--r-- | src/tool_operate.c | 1559 |
1 files changed, 1559 insertions, 0 deletions
diff --git a/src/tool_operate.c b/src/tool_operate.c new file mode 100644 index 000000000..7ab815f83 --- /dev/null +++ b/src/tool_operate.c @@ -0,0 +1,1559 @@ +/*************************************************************************** + * _ _ ____ _ + * Project ___| | | | _ \| | + * / __| | | | |_) | | + * | (__| |_| | _ <| |___ + * \___|\___/|_| \_\_____| + * + * Copyright (C) 1998 - 2011, Daniel Stenberg, <daniel@haxx.se>, et al. + * + * This software is licensed as described in the file COPYING, which + * you should have received as part of this distribution. The terms + * are also available at http://curl.haxx.se/docs/copyright.html. + * + * You may opt to use, copy, modify, merge, publish, distribute and/or sell + * copies of the Software, and permit persons to whom the Software is + * furnished to do so, under the terms of the COPYING file. + * + * This software is distributed on an "AS IS" basis, WITHOUT WARRANTY OF ANY + * KIND, either express or implied. + * + ***************************************************************************/ +#include "setup.h" + +#include <curl/curl.h> + +#ifdef HAVE_UNISTD_H +# include <unistd.h> +#endif + +#ifdef HAVE_FCNTL_H +# include <fcntl.h> +#endif + +#ifdef HAVE_UTIME_H +# include <utime.h> +#elif defined(HAVE_SYS_UTIME_H) +# include <sys/utime.h> +#endif + +#ifdef HAVE_LOCALE_H +# include <locale.h> +#endif + +#include "rawstr.h" + +#define ENABLE_CURLX_PRINTF +/* use our own printf() functions */ +#include "curlx.h" + +#include "tool_binmode.h" +#include "tool_cfgable.h" +#include "tool_cb_dbg.h" +#include "tool_cb_hdr.h" +#include "tool_cb_prg.h" +#include "tool_cb_rea.h" +#include "tool_cb_see.h" +#include "tool_cb_skt.h" +#include "tool_cb_wrt.h" +#include "tool_dirhie.h" +#include "tool_doswin.h" +#include "tool_easysrc.h" +#include "tool_getparam.h" +#include "tool_helpers.h" +#include "tool_homedir.h" +#include "tool_libinfo.h" +#include "tool_main.h" +#include "tool_msgs.h" +#include "tool_operate.h" +#include "tool_operhlp.h" +#include "tool_parsecfg.h" +#include "tool_setopt.h" +#include "tool_sleep.h" +#include "tool_urlglob.h" +#include "tool_util.h" +#include "tool_writeenv.h" +#include "tool_writeout.h" +#include "tool_xattr.h" + +#include "memdebug.h" /* keep this as LAST include */ + +#define CURLseparator "--_curl_--" + +#ifndef O_BINARY +/* since O_BINARY as used in bitmasks, setting it to zero makes it usable in + source code but yet it doesn't ruin anything */ +# define O_BINARY 0 +#endif + +#define CURL_CA_CERT_ERRORMSG1 \ + "More details here: http://curl.haxx.se/docs/sslcerts.html\n\n" \ + "curl performs SSL certificate verification by default, " \ + "using a \"bundle\"\n" \ + " of Certificate Authority (CA) public keys (CA certs). If the default\n" \ + " bundle file isn't adequate, you can specify an alternate file\n" \ + " using the --cacert option.\n" + +#define CURL_CA_CERT_ERRORMSG2 \ + "If this HTTPS server uses a certificate signed by a CA represented in\n" \ + " the bundle, the certificate verification probably failed due to a\n" \ + " problem with the certificate (it might be expired, or the name might\n" \ + " not match the domain name in the URL).\n" \ + "If you'd like to turn off curl's verification of the certificate, use\n" \ + " the -k (or --insecure) option.\n" + +int operate(struct Configurable *config, int argc, argv_item_t argv[]) +{ + char errorbuffer[CURL_ERROR_SIZE]; + struct ProgressData progressbar; + struct getout *urlnode; + + struct OutStruct heads; + + CURL *curl = NULL; + char *httpgetfields = NULL; + + bool stillflags; + int res = 0; + int i; + + errorbuffer[0] = '\0'; + /* default headers output stream is stdout */ + memset(&heads, 0, sizeof(struct OutStruct)); + heads.stream = stdout; + heads.config = config; + + memory_tracking_init(); + + /* + ** Initialize curl library - do not call any libcurl functions before + ** this point. Note that the memory_tracking_init() magic above is an + ** exception, but then that's not part of the official public API. + */ + if(main_init() != CURLE_OK) { + helpf(config->errors, "error initializing curl library\n"); + return CURLE_FAILED_INIT; + } + + /* Get libcurl info right away */ + if(get_libcurl_info() != CURLE_OK) { + helpf(config->errors, "error retrieving curl library information\n"); + main_free(); + return CURLE_FAILED_INIT; + } + + /* Get a curl handle to use for all forthcoming curl transfers */ + curl = curl_easy_init(); + if(!curl) { + helpf(config->errors, "error initializing curl easy handle\n"); + main_free(); + return CURLE_FAILED_INIT; + } + config->easy = curl; + + /* + ** Beyond this point no return'ing from this function allowed. + ** Jump to label 'quit_curl' in order to abandon this function + ** from outside of nested loops further down below. + */ + + /* setup proper locale from environment */ +#ifdef HAVE_SETLOCALE + setlocale(LC_ALL, ""); +#endif + + /* inits */ + config->postfieldsize = -1; + config->showerror = -1; /* will show errors */ + config->use_httpget = FALSE; + config->create_dirs = FALSE; + config->maxredirs = DEFAULT_MAXREDIRS; + config->proto = CURLPROTO_ALL; /* FIXME: better to read from library */ + config->proto_present = FALSE; + config->proto_redir = + CURLPROTO_ALL & ~(CURLPROTO_FILE|CURLPROTO_SCP); /* not FILE or SCP */ + config->proto_redir_present = FALSE; + + if((argc > 1) && + (!curlx_strnequal("--", argv[1], 2) && (argv[1][0] == '-')) && + strchr(argv[1], 'q')) { + /* + * The first flag, that is not a verbose name, but a shortname + * and it includes the 'q' flag! + */ + ; + } + else { + parseconfig(NULL, config); /* ignore possible failure */ + } + + if((argc < 2) && !config->url_list) { + helpf(config->errors, NULL); + res = CURLE_FAILED_INIT; + goto quit_curl; + } + + /* Parse options */ + for(i = 1, stillflags = TRUE; i < argc; i++) { + if(stillflags && + ('-' == argv[i][0])) { + char *nextarg; + bool passarg; + char *origopt = argv[i]; + + char *flag = argv[i]; + + if(curlx_strequal("--", argv[i])) + /* this indicates the end of the flags and thus enables the + following (URL) argument to start with -. */ + stillflags = FALSE; + else { + nextarg = (i < (argc-1)) ? argv[i+1] : NULL; + + res = getparameter(flag, nextarg, &passarg, config); + if(res) { + int retval = CURLE_OK; + if(res != PARAM_HELP_REQUESTED) { + const char *reason = param2text(res); + helpf(config->errors, "option %s: %s\n", origopt, reason); + retval = CURLE_FAILED_INIT; + } + res = retval; + goto quit_curl; + } + + if(passarg) /* we're supposed to skip this */ + i++; + } + } + else { + bool used; + /* just add the URL please */ + res = getparameter((char *)"--url", argv[i], &used, config); + if(res) + goto quit_curl; + } + } + + if((!config->url_list || !config->url_list->url) && !config->list_engines) { + helpf(config->errors, "no URL specified!\n"); + res = CURLE_FAILED_INIT; + goto quit_curl; + } + + if(!config->useragent) + config->useragent = my_useragent(); + if(!config->useragent) { + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + goto quit_curl; + } + + /* On WIN32 we can't set the path to curl-ca-bundle.crt + * at compile time. So we look here for the file in two ways: + * 1: look at the environment variable CURL_CA_BUNDLE for a path + * 2: if #1 isn't found, use the windows API function SearchPath() + * to find it along the app's path (includes app's dir and CWD) + * + * We support the environment variable thing for non-Windows platforms + * too. Just for the sake of it. + */ + if(!config->cacert && + !config->capath && + !config->insecure_ok) { + char *env; + env = curlx_getenv("CURL_CA_BUNDLE"); + if(env) { + config->cacert = strdup(env); + if(!config->cacert) { + curl_free(env); + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + goto quit_curl; + } + } + else { + env = curlx_getenv("SSL_CERT_DIR"); + if(env) { + config->capath = strdup(env); + if(!config->capath) { + curl_free(env); + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + goto quit_curl; + } + } + else { + env = curlx_getenv("SSL_CERT_FILE"); + if(env) { + config->cacert = strdup(env); + if(!config->cacert) { + curl_free(env); + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + goto quit_curl; + } + } + } + } + + if(env) + curl_free(env); +#ifdef WIN32 + else { + res = FindWin32CACert(config, "curl-ca-bundle.crt"); + if(res) + goto quit_curl; + } +#endif + } + + if(config->postfields) { + if(config->use_httpget) { + /* Use the postfields data for a http get */ + httpgetfields = strdup(config->postfields); + Curl_safefree(config->postfields); + if(!httpgetfields) { + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + goto quit_curl; + } + if(SetHTTPrequest(config, + (config->no_body?HTTPREQ_HEAD:HTTPREQ_GET), + &config->httpreq)) { + res = PARAM_BAD_USE; + goto quit_curl; + } + } + else { + if(SetHTTPrequest(config, HTTPREQ_SIMPLEPOST, &config->httpreq)) { + res = PARAM_BAD_USE; + goto quit_curl; + } + } + } + + /* This is the first entry added to easysrc and it initializes the slist */ + easysrc = curl_slist_append(easysrc, "CURL *hnd = curl_easy_init();"); + if(!easysrc) { + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + goto quit_curl; + } + + if(config->list_engines) { + struct curl_slist *engines = NULL; + curl_easy_getinfo(curl, CURLINFO_SSL_ENGINES, &engines); + list_engines(engines); + curl_slist_free_all(engines); + res = CURLE_OK; + goto quit_curl; + } + + /* Single header file for all URLs */ + if(config->headerfile) { + /* open file for output: */ + if(!curlx_strequal(config->headerfile, "-")) { + FILE *newfile = fopen(config->headerfile, "wb"); + if(!newfile) { + warnf(config, "Failed to open %s\n", config->headerfile); + res = CURLE_WRITE_ERROR; + goto quit_curl; + } + else { + heads.filename = config->headerfile; + heads.s_isreg = TRUE; + heads.fopened = TRUE; + heads.stream = newfile; + } + } + } + + /* + ** Nested loops start here. + */ + + /* loop through the list of given URLs */ + + for(urlnode = config->url_list; urlnode; urlnode = urlnode->next) { + + int up; /* upload file counter within a single upload glob */ + char *infiles; /* might be a glob pattern */ + char *outfiles; + int infilenum; + URLGlob *inglob; + + outfiles = NULL; + infilenum = 0; + inglob = NULL; + + /* urlnode->url is the full URL (it might be NULL) */ + + if(!urlnode->url) { + /* This node has no URL. Free node data without destroying the + node itself nor modifying next pointer and continue to next */ + Curl_safefree(urlnode->outfile); + Curl_safefree(urlnode->infile); + urlnode->flags = 0; + continue; /* next URL please */ + } + + /* save outfile pattern before expansion */ + if(urlnode->outfile) { + outfiles = strdup(urlnode->outfile); + if(!outfiles) { + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + break; + } + } + + infiles = urlnode->infile; + + if(!config->globoff && infiles) { + /* Unless explicitly shut off */ + res = glob_url(&inglob, infiles, &infilenum, + config->showerror?config->errors:NULL); + if(res) { + Curl_safefree(outfiles); + break; + } + } + + /* Here's the loop for uploading multiple files within the same + single globbed string. If no upload, we enter the loop once anyway. */ + for(up = 0 ;; up++) { + + char *uploadfile; /* a single file, never a glob */ + int separator; + URLGlob *urls; + int urlnum; + + uploadfile = NULL; + separator = 0; + urls = NULL; + urlnum = 0; + + if(!up && !infiles) + Curl_nop_stmt; + else { + if(inglob) { + res = glob_next_url(&uploadfile, inglob); + if(res == CURLE_OUT_OF_MEMORY) + helpf(config->errors, "out of memory\n"); + } + else if(!up) { + uploadfile = strdup(infiles); + if(!uploadfile) { + helpf(config->errors, "out of memory\n"); + res = CURLE_OUT_OF_MEMORY; + } + } + else + uploadfile = NULL; + if(!uploadfile) + break; + } + + if(!config->globoff) { + /* Unless explicitly shut off, we expand '{...}' and '[...]' + expressions and return total number of URLs in pattern set */ + res = glob_url(&urls, urlnode->url, &urlnum, + config->showerror?config->errors:NULL); + if(res) { + Curl_safefree(uploadfile); + break; + } + } + else + urlnum = 1; /* without globbing, this is a single URL */ + + /* if multiple files extracted to stdout, insert separators! */ + separator= ((!outfiles || curlx_strequal(outfiles, "-")) && urlnum > 1); + + /* Here's looping around each globbed URL */ + for(i = 0 ;; i++) { + + int infd; + bool infdopen; + char *outfile; + struct OutStruct outs; + struct InStruct input; + struct timeval retrystart; + curl_off_t uploadfilesize; + long retry_numretries; + long retry_sleep_default; + long retry_sleep; + char *this_url; + + outfile = NULL; + infdopen = FALSE; + infd = STDIN_FILENO; + uploadfilesize = -1; /* -1 means unknown */ + + /* default output stream is stdout */ + memset(&outs, 0, sizeof(struct OutStruct)); + outs.stream = stdout; + outs.config = config; + + if(urls) { + res = glob_next_url(&this_url, urls); + if(res) + goto show_error; + } + else if(!i) { + this_url = strdup(urlnode->url); + if(!this_url) { + res = CURLE_OUT_OF_MEMORY; + goto show_error; + } + } + else + this_url = NULL; + if(!this_url) + break; + + if(outfiles) { + outfile = strdup(outfiles); + if(!outfile) { + res = CURLE_OUT_OF_MEMORY; + goto show_error; + } + } + + if((urlnode->flags&GETOUT_USEREMOTE) || + (outfile && !curlx_strequal("-", outfile)) ) { + + /* + * We have specified a file name to store the result in, or we have + * decided we want to use the remote file name. + */ + + if(!outfile) { + /* extract the file name from the URL */ + res = get_url_file_name(&outfile, this_url); + if(res) + goto show_error; + if((!outfile || !*outfile) && !config->content_disposition) { + helpf(config->errors, "Remote file name has no length!\n"); + res = CURLE_WRITE_ERROR; + goto quit_urls; + } +#if defined(MSDOS) || defined(WIN32) + /* For DOS and WIN32, we do some major replacing of + bad characters in the file name before using it */ + outfile = sanitize_dos_name(outfile); + if(!outfile) { + res = CURLE_OUT_OF_MEMORY; + goto show_error; + } +#endif /* MSDOS || WIN32 */ + } + else if(urls) { + /* fill '#1' ... '#9' terms from URL pattern */ + char *storefile = outfile; + res = glob_match_url(&outfile, storefile, urls); + Curl_safefree(storefile); + if(res) { + /* bad globbing */ + warnf(config, "bad output glob!\n"); + goto quit_urls; + } + } + + /* Create the directory hierarchy, if not pre-existent to a multiple + file output call */ + + if(config->create_dirs) { + res = create_dir_hierarchy(outfile, config->errors); + /* create_dir_hierarchy shows error upon CURLE_WRITE_ERROR */ + if(res == CURLE_WRITE_ERROR) + goto quit_urls; + if(res) { + goto show_error; + } + } + + if((urlnode->flags & GETOUT_USEREMOTE) + && config->content_disposition) { + /* Our header callback sets the filename */ + DEBUGASSERT(!outs.filename); + } + else { + if(config->resume_from_current) { + /* We're told to continue from where we are now. Get the size + of the file as it is now and open it for append instead */ + struct_stat fileinfo; + /* VMS -- Danger, the filesize is only valid for stream files */ + if(0 == stat(outfile, &fileinfo)) + /* set offset to current file size: */ + config->resume_from = fileinfo.st_size; + else + /* let offset be 0 */ + config->resume_from = 0; + } + + if(config->resume_from) { + /* open file for output: */ + FILE *file = fopen(outfile, config->resume_from?"ab":"wb"); + if(!file) { + helpf(config->errors, "Can't open '%s'!\n", outfile); + res = CURLE_WRITE_ERROR; + goto quit_urls; + } + outs.fopened = TRUE; + outs.stream = file; + outs.init = config->resume_from; + } + else { + outs.stream = NULL; /* open when needed */ + } + outs.filename = outfile; + outs.s_isreg = TRUE; + } + } + + if(uploadfile && !stdin_upload(uploadfile)) { + /* + * We have specified a file to upload and it isn't "-". + */ + struct_stat fileinfo; + + this_url = add_file_name_to_url(curl, this_url, uploadfile); + if(!this_url) { + res = CURLE_OUT_OF_MEMORY; + goto show_error; + } + /* VMS Note: + * + * Reading binary from files can be a problem... Only FIXED, VAR + * etc WITHOUT implied CC will work Others need a \n appended to a + * line + * + * - Stat gives a size but this is UNRELIABLE in VMS As a f.e. a + * fixed file with implied CC needs to have a byte added for every + * record processed, this can by derived from Filesize & recordsize + * for VARiable record files the records need to be counted! for + * every record add 1 for linefeed and subtract 2 for the record + * header for VARIABLE header files only the bare record data needs + * to be considered with one appended if implied CC + */ + + infd = open(uploadfile, O_RDONLY | O_BINARY); + if((infd == -1) || fstat(infd, &fileinfo)) { + helpf(config->errors, "Can't open '%s'!\n", uploadfile); + if(infd != -1) { + close(infd); + infd = STDIN_FILENO; + } + res = CURLE_READ_ERROR; + goto quit_urls; + } + infdopen = TRUE; + + /* we ignore file size for char/block devices, sockets, etc. */ + if(S_ISREG(fileinfo.st_mode)) + uploadfilesize = fileinfo.st_size; + + } + else if(uploadfile && stdin_upload(uploadfile)) { + /* count to see if there are more than one auth bit set + in the authtype field */ + int authbits = 0; + int bitcheck = 0; + while(bitcheck < 32) { + if(config->authtype & (1 << bitcheck++)) { + authbits++; + if(authbits > 1) { + /* more than one, we're done! */ + break; + } + } + } + + /* + * If the user has also selected --anyauth or --proxy-anyauth + * we should warn him/her. + */ + if(config->proxyanyauth || (authbits>1)) { + warnf(config, + "Using --anyauth or --proxy-anyauth with upload from stdin" + " involves a big risk of it not working. Use a temporary" + " file or a fixed auth type instead!\n"); + } + + DEBUGASSERT(infdopen == FALSE); + DEBUGASSERT(infd == STDIN_FILENO); + + set_binmode(stdin); + if(curlx_strequal(uploadfile, ".")) { + if(curlx_nonblock((curl_socket_t)infd, TRUE) < 0) + warnf(config, + "fcntl failed on fd=%d: %s\n", infd, strerror(errno)); + } + } + + if(uploadfile && config->resume_from_current) + config->resume_from = -1; /* -1 will then force get-it-yourself */ + + if(output_expected(this_url, uploadfile) + && outs.stream && isatty(fileno(outs.stream))) + /* we send the output to a tty, therefore we switch off the progress + meter */ + config->noprogress = config->isatty = TRUE; + + if(urlnum > 1 && !(config->mute)) { + fprintf(config->errors, "\n[%d/%d]: %s --> %s\n", + i+1, urlnum, this_url, outfile ? outfile : "<stdout>"); + if(separator) + printf("%s%s\n", CURLseparator, this_url); + } + if(httpgetfields) { + char *urlbuffer; + /* Find out whether the url contains a file name */ + const char *pc = strstr(this_url, "://"); + char sep = '?'; + if(pc) + pc += 3; + else + pc = this_url; + + pc = strrchr(pc, '/'); /* check for a slash */ + + if(pc) { + /* there is a slash present in the URL */ + + if(strchr(pc, '?')) + /* Ouch, there's already a question mark in the URL string, we + then append the data with an ampersand separator instead! */ + sep='&'; + } + /* + * Then append ? followed by the get fields to the url. + */ + urlbuffer = malloc(strlen(this_url) + strlen(httpgetfields) + 3); + if(!urlbuffer) { + res = CURLE_OUT_OF_MEMORY; + goto show_error; + } + if(pc) + sprintf(urlbuffer, "%s%c%s", this_url, sep, httpgetfields); + else + /* Append / before the ? to create a well-formed url + if the url contains a hostname only + */ + sprintf(urlbuffer, "%s/?%s", this_url, httpgetfields); + + Curl_safefree(this_url); /* free previous URL */ + this_url = urlbuffer; /* use our new URL instead! */ + } + + if(!config->errors) + config->errors = stderr; + + if((!outfile || !strcmp(outfile, "-")) && !config->use_ascii) { + /* We get the output to stdout and we have not got the ASCII/text + flag, then set stdout to be binary */ + set_binmode(stdout); + } + + if(config->tcp_nodelay) + my_setopt(curl, CURLOPT_TCP_NODELAY, 1); + + /* where to store */ + my_setopt(curl, CURLOPT_WRITEDATA, &outs); + /* what call to write */ + my_setopt(curl, CURLOPT_WRITEFUNCTION, tool_write_cb); + + /* for uploads */ + input.fd = infd; + input.config = config; + my_setopt(curl, CURLOPT_READDATA, &input); + /* what call to read */ + if((outfile && !curlx_strequal("-", outfile)) || + !checkprefix("telnet:", this_url)) + my_setopt(curl, CURLOPT_READFUNCTION, tool_read_cb); + + /* in 7.18.0, the CURLOPT_SEEKFUNCTION/DATA pair is taking over what + CURLOPT_IOCTLFUNCTION/DATA pair previously provided for seeking */ + my_setopt(curl, CURLOPT_SEEKDATA, &input); + my_setopt(curl, CURLOPT_SEEKFUNCTION, tool_seek_cb); + + if(config->recvpersecond) + /* tell libcurl to use a smaller sized buffer as it allows us to + make better sleeps! 7.9.9 stuff! */ + my_setopt(curl, CURLOPT_BUFFERSIZE, config->recvpersecond); + + /* size of uploaded file: */ + if(uploadfilesize != -1) + my_setopt(curl, CURLOPT_INFILESIZE_LARGE, uploadfilesize); + my_setopt_str(curl, CURLOPT_URL, this_url); /* what to fetch */ + my_setopt(curl, CURLOPT_NOPROGRESS, config->noprogress); + if(config->no_body) { + my_setopt(curl, CURLOPT_NOBODY, 1); + my_setopt(curl, CURLOPT_HEADER, 1); + } + else + my_setopt(curl, CURLOPT_HEADER, config->include_headers); + +#if !defined(CURL_DISABLE_PROXY) + { + /* TODO: Make this a run-time check instead of compile-time one. */ + + my_setopt_str(curl, CURLOPT_PROXY, config->proxy); + my_setopt_str(curl, CURLOPT_PROXYUSERPWD, config->proxyuserpwd); + + /* new in libcurl 7.3 */ + my_setopt(curl, CURLOPT_HTTPPROXYTUNNEL, config->proxytunnel); + + /* new in libcurl 7.5 */ + if(config->proxy) + my_setopt(curl, CURLOPT_PROXYTYPE, config->proxyver); + + /* new in libcurl 7.10 */ + if(config->socksproxy) { + my_setopt_str(curl, CURLOPT_PROXY, config->socksproxy); + my_setopt(curl, CURLOPT_PROXYTYPE, config->socksver); + } + + /* new in libcurl 7.10.6 */ + if(config->proxyanyauth) + my_setopt(curl, CURLOPT_PROXYAUTH, CURLAUTH_ANY); + else if(config->proxynegotiate) + my_setopt(curl, CURLOPT_PROXYAUTH, CURLAUTH_GSSNEGOTIATE); + else if(config->proxyntlm) + my_setopt(curl, CURLOPT_PROXYAUTH, CURLAUTH_NTLM); + else if(config->proxydigest) + my_setopt(curl, CURLOPT_PROXYAUTH, CURLAUTH_DIGEST); + else if(config->proxybasic) + my_setopt(curl, CURLOPT_PROXYAUTH, CURLAUTH_BASIC); + + /* new in libcurl 7.19.4 */ + my_setopt(curl, CURLOPT_NOPROXY, config->noproxy); + } +#endif + + my_setopt(curl, CURLOPT_FAILONERROR, config->failonerror); + my_setopt(curl, CURLOPT_UPLOAD, uploadfile?TRUE:FALSE); + my_setopt(curl, CURLOPT_DIRLISTONLY, config->dirlistonly); + my_setopt(curl, CURLOPT_APPEND, config->ftp_append); + + if(config->netrc_opt) + my_setopt(curl, CURLOPT_NETRC, CURL_NETRC_OPTIONAL); + else if(config->netrc || config->netrc_file) + my_setopt(curl, CURLOPT_NETRC, CURL_NETRC_REQUIRED); + else + my_setopt(curl, CURLOPT_NETRC, CURL_NETRC_IGNORED); + + if(config->netrc_file) + my_setopt(curl, CURLOPT_NETRC_FILE, config->netrc_file); + + my_setopt(curl, CURLOPT_TRANSFERTEXT, config->use_ascii); + my_setopt_str(curl, CURLOPT_USERPWD, config->userpwd); + my_setopt_str(curl, CURLOPT_RANGE, config->range); + my_setopt(curl, CURLOPT_ERRORBUFFER, errorbuffer); + my_setopt(curl, CURLOPT_TIMEOUT, config->timeout); + + if(built_in_protos & CURLPROTO_HTTP) { + + my_setopt(curl, CURLOPT_FOLLOWLOCATION, + config->followlocation); + my_setopt(curl, CURLOPT_UNRESTRICTED_AUTH, + config->unrestricted_auth); + + switch(config->httpreq) { + case HTTPREQ_SIMPLEPOST: + my_setopt_str(curl, CURLOPT_POSTFIELDS, + config->postfields); + my_setopt(curl, CURLOPT_POSTFIELDSIZE_LARGE, + config->postfieldsize); + break; + case HTTPREQ_POST: + my_setopt(curl, CURLOPT_HTTPPOST, config->httppost); + break; + default: + break; + } + + my_setopt_str(curl, CURLOPT_REFERER, config->referer); + my_setopt(curl, CURLOPT_AUTOREFERER, config->autoreferer); + my_setopt_str(curl, CURLOPT_USERAGENT, config->useragent); + my_setopt(curl, CURLOPT_HTTPHEADER, config->headers); + + /* new in libcurl 7.5 */ + my_setopt(curl, CURLOPT_MAXREDIRS, config->maxredirs); + + /* new in libcurl 7.9.1 */ + if(config->httpversion) + my_setopt(curl, CURLOPT_HTTP_VERSION, config->httpversion); + + /* new in libcurl 7.10.6 (default is Basic) */ + if(config->authtype) + my_setopt(curl, CURLOPT_HTTPAUTH, config->authtype); + + /* curl 7.19.1 (the 301 version existed in 7.18.2) */ + my_setopt(curl, CURLOPT_POSTREDIR, config->post301 | + (config->post302 ? CURL_REDIR_POST_302 : FALSE)); + + /* new in libcurl 7.21.6 */ + if(config->encoding) + my_setopt_str(curl, CURLOPT_ACCEPT_ENCODING, ""); + + /* new in libcurl 7.21.6 */ + if(config->tr_encoding) + my_setopt(curl, CURLOPT_TRANSFER_ENCODING, 1); + + } /* (built_in_protos & CURLPROTO_HTTP) */ + + my_setopt_str(curl, CURLOPT_FTPPORT, config->ftpport); + my_setopt(curl, CURLOPT_LOW_SPEED_LIMIT, + config->low_speed_limit); + my_setopt(curl, CURLOPT_LOW_SPEED_TIME, config->low_speed_time); + my_setopt(curl, CURLOPT_MAX_SEND_SPEED_LARGE, + config->sendpersecond); + my_setopt(curl, CURLOPT_MAX_RECV_SPEED_LARGE, + config->recvpersecond); + my_setopt(curl, CURLOPT_RESUME_FROM_LARGE, + config->use_resume?config->resume_from:0); + + my_setopt(curl, CURLOPT_SSLCERT, config->cert); + my_setopt_str(curl, CURLOPT_SSLCERTTYPE, config->cert_type); + my_setopt(curl, CURLOPT_SSLKEY, config->key); + my_setopt_str(curl, CURLOPT_SSLKEYTYPE, config->key_type); + my_setopt_str(curl, CURLOPT_KEYPASSWD, config->key_passwd); + + if(built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) { + + /* SSH and SSL private key uses same command-line option */ + /* new in libcurl 7.16.1 */ + my_setopt_str(curl, CURLOPT_SSH_PRIVATE_KEYFILE, config->key); + /* new in libcurl 7.16.1 */ + my_setopt_str(curl, CURLOPT_SSH_PUBLIC_KEYFILE, config->pubkey); + + /* new in libcurl 7.17.1: SSH host key md5 checking allows us + to fail if we are not talking to who we think we should */ + my_setopt_str(curl, CURLOPT_SSH_HOST_PUBLIC_KEY_MD5, + config->hostpubmd5); + } + + if(config->cacert) + my_setopt_str(curl, CURLOPT_CAINFO, config->cacert); + if(config->capath) + my_setopt_str(curl, CURLOPT_CAPATH, config->capath); + if(config->crlfile) + my_setopt_str(curl, CURLOPT_CRLFILE, config->crlfile); + + if(curlinfo->features & CURL_VERSION_SSL) { + if(config->insecure_ok) { + my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 0L); + my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 1L); + } + else { + my_setopt(curl, CURLOPT_SSL_VERIFYPEER, 1L); + /* libcurl default is strict verifyhost -> 2L */ + /* my_setopt(curl, CURLOPT_SSL_VERIFYHOST, 2L); */ + } + } + + if(built_in_protos & (CURLPROTO_SCP|CURLPROTO_SFTP)) { + if(!config->insecure_ok) { + char *home; + char *file; + res = CURLE_OUT_OF_MEMORY; + home = homedir(); + if(home) { + file = aprintf("%s/%sssh/known_hosts", home, DOT_CHAR); + if(file) { + /* new in curl 7.19.6 */ + res = res_setopt_str(curl, CURLOPT_SSH_KNOWNHOSTS, file); + curl_free(file); + if(res == CURLE_UNKNOWN_OPTION) + /* libssh2 version older than 1.1.1 */ + res = CURLE_OK; + } + Curl_safefree(home); + } + if(res) + goto show_error; + } + } + + if(config->no_body || config->remote_time) { + /* no body or use remote time */ + my_setopt(curl, CURLOPT_FILETIME, TRUE); + } + + my_setopt(curl, CURLOPT_CRLF, config->crlf); + my_setopt(curl, CURLOPT_QUOTE, config->quote); + my_setopt(curl, CURLOPT_POSTQUOTE, config->postquote); + my_setopt(curl, CURLOPT_PREQUOTE, config->prequote); + +#if !defined(CURL_DISABLE_HTTP) && !defined(CURL_DISABLE_COOKIES) + { + /* TODO: Make this a run-time check instead of compile-time one. */ + + if(config->cookie) + my_setopt_str(curl, CURLOPT_COOKIE, config->cookie); + + if(config->cookiefile) + my_setopt_str(curl, CURLOPT_COOKIEFILE, config->cookiefile); + + /* new in libcurl 7.9 */ + if(config->cookiejar) + my_setopt_str(curl, CURLOPT_COOKIEJAR, config->cookiejar); + + /* new in libcurl 7.9.7 */ + my_setopt(curl, CURLOPT_COOKIESESSION, config->cookiesession); + } +#endif + + my_setopt(curl, CURLOPT_SSLVERSION, config->ssl_version); + my_setopt(curl, CURLOPT_TIMECONDITION, config->timecond); + my_setopt(curl, CURLOPT_TIMEVALUE, config->condtime); + my_setopt_str(curl, CURLOPT_CUSTOMREQUEST, config->customrequest); + my_setopt(curl, CURLOPT_STDERR, config->errors); + + /* three new ones in libcurl 7.3: */ + my_setopt_str(curl, CURLOPT_INTERFACE, config->iface); + my_setopt_str(curl, CURLOPT_KRBLEVEL, config->krblevel); + + progressbarinit(&progressbar, config); + if((config->progressmode == CURL_PROGRESS_BAR) && + !config->noprogress && !config->mute) { + /* we want the alternative style, then we have to implement it + ourselves! */ + my_setopt(curl, CURLOPT_PROGRESSFUNCTION, tool_progress_cb); + my_setopt(curl, CURLOPT_PROGRESSDATA, &progressbar); + } + + /* new in libcurl 7.6.2: */ + my_setopt(curl, CURLOPT_TELNETOPTIONS, config->telnet_options); + + /* new in libcurl 7.7: */ + my_setopt_str(curl, CURLOPT_RANDOM_FILE, config->random_file); + my_setopt(curl, CURLOPT_EGDSOCKET, config->egd_file); + my_setopt(curl, CURLOPT_CONNECTTIMEOUT, config->connecttimeout); + + if(config->cipher_list) + my_setopt_str(curl, CURLOPT_SSL_CIPHER_LIST, config->cipher_list); + + /* new in libcurl 7.9.2: */ + if(config->disable_epsv) + /* disable it */ + my_setopt(curl, CURLOPT_FTP_USE_EPSV, FALSE); + + /* new in libcurl 7.10.5 */ + if(config->disable_eprt) + /* disable it */ + my_setopt(curl, CURLOPT_FTP_USE_EPRT, FALSE); + + if(config->tracetype != TRACE_NONE) { + my_setopt(curl, CURLOPT_DEBUGFUNCTION, tool_debug_cb); + my_setopt(curl, CURLOPT_DEBUGDATA, config); + my_setopt(curl, CURLOPT_VERBOSE, TRUE); + } + + /* new in curl 7.9.3 */ + if(config->engine) { + res = res_setopt_str(curl, CURLOPT_SSLENGINE, config->engine); + if(res) + goto show_error; + my_setopt(curl, CURLOPT_SSLENGINE_DEFAULT, 1); + } + + /* new in curl 7.10.7, extended in 7.19.4 but this only sets 0 or 1 */ + my_setopt(curl, CURLOPT_FTP_CREATE_MISSING_DIRS, + config->ftp_create_dirs); + + /* new in curl 7.10.8 */ + if(config->max_filesize) + my_setopt(curl, CURLOPT_MAXFILESIZE_LARGE, + config->max_filesize); + + if(4 == config->ip_version) + my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V4); + else if(6 == config->ip_version) + my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_V6); + else + my_setopt(curl, CURLOPT_IPRESOLVE, CURL_IPRESOLVE_WHATEVER); + + /* new in curl 7.15.5 */ + if(config->ftp_ssl_reqd) + my_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_ALL); + + /* new in curl 7.11.0 */ + else if(config->ftp_ssl) + my_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_TRY); + + /* new in curl 7.16.0 */ + else if(config->ftp_ssl_control) + my_setopt(curl, CURLOPT_USE_SSL, CURLUSESSL_CONTROL); + + /* new in curl 7.16.1 */ + if(config->ftp_ssl_ccc) + my_setopt(curl, CURLOPT_FTP_SSL_CCC, config->ftp_ssl_ccc_mode); + +#if defined(HAVE_GSSAPI) || defined(USE_WINDOWS_SSPI) + { + /* TODO: Make this a run-time check instead of compile-time one. */ + + /* new in curl 7.19.4 */ + if(config->socks5_gssapi_service) + my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_SERVICE, + config->socks5_gssapi_service); + + /* new in curl 7.19.4 */ + if(config->socks5_gssapi_nec) + my_setopt_str(curl, CURLOPT_SOCKS5_GSSAPI_NEC, + config->socks5_gssapi_nec); + } +#endif + /* curl 7.13.0 */ + my_setopt_str(curl, CURLOPT_FTP_ACCOUNT, config->ftp_account); + + my_setopt(curl, CURLOPT_IGNORE_CONTENT_LENGTH, config->ignorecl); + + /* curl 7.14.2 */ + my_setopt(curl, CURLOPT_FTP_SKIP_PASV_IP, config->ftp_skip_ip); + + /* curl 7.15.1 */ + my_setopt(curl, CURLOPT_FTP_FILEMETHOD, config->ftp_filemethod); + + /* curl 7.15.2 */ + if(config->localport) { + my_setopt(curl, CURLOPT_LOCALPORT, config->localport); + my_setopt_str(curl, CURLOPT_LOCALPORTRANGE, + config->localportrange); + } + + /* curl 7.15.5 */ + my_setopt_str(curl, CURLOPT_FTP_ALTERNATIVE_TO_USER, + config->ftp_alternative_to_user); + + /* curl 7.16.0 */ + if(config->disable_sessionid) + my_setopt(curl, CURLOPT_SSL_SESSIONID_CACHE, + !config->disable_sessionid); + + /* curl 7.16.2 */ + if(config->raw) { + my_setopt(curl, CURLOPT_HTTP_CONTENT_DECODING, FALSE); + my_setopt(curl, CURLOPT_HTTP_TRANSFER_DECODING, FALSE); + } + + /* curl 7.17.1 */ + if(!config->nokeepalive) { + my_setopt(curl, CURLOPT_SOCKOPTFUNCTION, tool_sockopt_cb); + my_setopt(curl, CURLOPT_SOCKOPTDATA, config); + } + + /* curl 7.20.0 */ + if(config->tftp_blksize) + my_setopt(curl, CURLOPT_TFTP_BLKSIZE, config->tftp_blksize); + + if(config->mail_from) + my_setopt_str(curl, CURLOPT_MAIL_FROM, config->mail_from); + + if(config->mail_rcpt) + my_setopt(curl, CURLOPT_MAIL_RCPT, config->mail_rcpt); + + /* curl 7.20.x */ + if(config->ftp_pret) + my_setopt(curl, CURLOPT_FTP_USE_PRET, TRUE); + + if(config->proto_present) + my_setopt(curl, CURLOPT_PROTOCOLS, config->proto); + if(config->proto_redir_present) + my_setopt(curl, CURLOPT_REDIR_PROTOCOLS, config->proto_redir); + + if((urlnode->flags & GETOUT_USEREMOTE) + && config->content_disposition) { + my_setopt(curl, CURLOPT_HEADERFUNCTION, tool_header_cb); + my_setopt(curl, CURLOPT_HEADERDATA, &outs); + } + else { + /* if HEADERFUNCTION was set to something in the previous loop, it + is important that we set it (back) to NULL now */ + my_setopt(curl, CURLOPT_HEADERFUNCTION, NULL); + my_setopt(curl, CURLOPT_HEADERDATA, config->headerfile?&heads:NULL); + } + + if(config->resolve) + /* new in 7.21.3 */ + my_setopt(curl, CURLOPT_RESOLVE, config->resolve); + + /* new in 7.21.4 */ + if(curlinfo->features & CURL_VERSION_TLSAUTH_SRP) { + if(config->tls_username) + my_setopt_str(curl, CURLOPT_TLSAUTH_USERNAME, + config->tls_username); + if(config->tls_password) + my_setopt_str(curl, CURLOPT_TLSAUTH_PASSWORD, + config->tls_password); + if(config->tls_authtype) + my_setopt_str(curl, CURLOPT_TLSAUTH_TYPE, + config->tls_authtype); + } + + /* new in 7.22.0 */ + if(config->gssapi_delegation) + my_setopt_str(curl, CURLOPT_GSSAPI_DELEGATION, + config->gssapi_delegation); + + /* initialize retry vars for loop below */ + retry_sleep_default = (config->retry_delay) ? + config->retry_delay*1000L : RETRY_SLEEP_DEFAULT; /* ms */ + + retry_numretries = config->req_retry; + retry_sleep = retry_sleep_default; /* ms */ + retrystart = tvnow(); + + if(!curl_slist_append(easysrc, "ret = curl_easy_perform(hnd);")) { + res = CURLE_OUT_OF_MEMORY; + goto show_error; + } + + for(;;) { + res = curl_easy_perform(curl); + + if(config->content_disposition && outs.stream && !config->mute && + outs.filename) + printf("curl: Saved to filename '%s'\n", outs.filename); + + /* if retry-max-time is non-zero, make sure we haven't exceeded the + time */ + if(retry_numretries && + (!config->retry_maxtime || + (tvdiff(tvnow(), retrystart) < + config->retry_maxtime*1000L)) ) { + enum { + RETRY_NO, + RETRY_TIMEOUT, + RETRY_HTTP, + RETRY_FTP, + RETRY_LAST /* not used */ + } retry = RETRY_NO; + long response; + if(CURLE_OPERATION_TIMEDOUT == res) + /* retry timeout always */ + retry = RETRY_TIMEOUT; + else if((CURLE_OK == res) || + (config->failonerror && + (CURLE_HTTP_RETURNED_ERROR == res))) { + /* If it returned OK. _or_ failonerror was enabled and it + returned due to such an error, check for HTTP transient + errors to retry on. */ + char *effective_url = NULL; + curl_easy_getinfo(curl, CURLINFO_EFFECTIVE_URL, &effective_url); + if(effective_url && + checkprefix("http", effective_url)) { + /* This was HTTP(S) */ + curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response); + + switch(response) { + case 500: /* Internal Server Error */ + case 502: /* Bad Gateway */ + case 503: /* Service Unavailable */ + case 504: /* Gateway Timeout */ + retry = RETRY_HTTP; + /* + * At this point, we have already written data to the output + * file (or terminal). If we write to a file, we must rewind + * or close/re-open the file so that the next attempt starts + * over from the beginning. + * + * TODO: similar action for the upload case. We might need + * to start over reading from a previous point if we have + * uploaded something when this was returned. + */ + break; + } + } + } /* if CURLE_OK */ + else if(res) { + curl_easy_getinfo(curl, CURLINFO_RESPONSE_CODE, &response); + + if(response/100 == 4) + /* + * This is typically when the FTP server only allows a certain + * amount of users and we are not one of them. All 4xx codes + * are transient. + */ + retry = RETRY_FTP; + } + + if(retry) { + static const char * const m[]={ + NULL, "timeout", "HTTP error", "FTP error" + }; + warnf(config, "Transient problem: %s " + "Will retry in %ld seconds. " + "%ld retries left.\n", + m[retry], retry_sleep/1000L, retry_numretries); + + tool_go_sleep(retry_sleep); + retry_numretries--; + if(!config->retry_delay) { + retry_sleep *= 2; + if(retry_sleep > RETRY_SLEEP_MAX) + retry_sleep = RETRY_SLEEP_MAX; + } + if(outs.bytes && outs.filename) { + /* We have written data to a output file, we truncate file + */ + if(!config->mute) + fprintf(config->errors, "Throwing away %" + CURL_FORMAT_CURL_OFF_T " bytes\n", + outs.bytes); + fflush(outs.stream); + /* truncate file at the position where we started appending */ +#ifdef HAVE_FTRUNCATE + if(ftruncate( fileno(outs.stream), outs.init)) { + /* when truncate fails, we can't just append as then we'll + create something strange, bail out */ + if(!config->mute) + fprintf(config->errors, + "failed to truncate, exiting\n"); + res = CURLE_WRITE_ERROR; + goto quit_urls; + } + /* now seek to the end of the file, the position where we + just truncated the file in a large file-safe way */ + fseek(outs.stream, 0, SEEK_END); +#else + /* ftruncate is not available, so just reposition the file + to the location we would have truncated it. This won't + work properly with large files on 32-bit systems, but + most of those will have ftruncate. */ + fseek(outs.stream, (long)outs.init, SEEK_SET); +#endif + outs.bytes = 0; /* clear for next round */ + } + continue; /* curl_easy_perform loop */ + } + } /* if retry_numretries */ + + /* In all ordinary cases, just break out of loop here */ + break; /* curl_easy_perform loop */ + + } + + if((config->progressmode == CURL_PROGRESS_BAR) && + progressbar.calls) + /* if the custom progress bar has been displayed, we output a + newline here */ + fputs("\n", progressbar.out); + + if(config->writeout) + ourWriteOut(curl, config->writeout); + + if(config->writeenv) + ourWriteEnv(curl); + + /* + ** Code within this loop may jump directly here to label 'show_error' + ** in order to display an error message for CURLcode stored in 'res' + ** variable and exit loop once that necessary writing and cleanup + ** in label 'quit_urls' has been done. + */ + + show_error: + +#ifdef __VMS + if(is_vms_shell()) { + /* VMS DCL shell behavior */ + if(!config->showerror) + vms_show = VMSSTS_HIDE; + } + else +#endif + if(res && config->showerror) { + fprintf(config->errors, "curl: (%d) %s\n", res, (errorbuffer[0]) ? + errorbuffer : curl_easy_strerror((CURLcode)res)); + if(res == CURLE_SSL_CACERT) + fprintf(config->errors, "%s%s", + CURL_CA_CERT_ERRORMSG1, CURL_CA_CERT_ERRORMSG2); + } + + /* Fall through comment to 'quit_urls' label */ + + /* + ** Upon error condition and always that a message has already been + ** displayed, code within this loop may jump directly here to label + ** 'quit_urls' otherwise it should jump to 'show_error' label above. + ** + ** When 'res' variable is _not_ CURLE_OK loop will exit once that + ** all code following 'quit_urls' has been executed. Otherwise it + ** will loop to the beginning from where it may exit if there are + ** no more urls left. + */ + + quit_urls: + + /* Set file extended attributes */ + if(!res && config->xattr && outs.fopened && outs.stream) { + int rc = fwrite_xattr(curl, fileno(outs.stream)); + if(rc) + warnf(config, "Error setting extended attributes: %s\n", + strerror(errno)); + } + + /* Close the file */ + if(outs.fopened && outs.stream) { + int rc = fclose(outs.stream); + if(!res && rc) { + /* something went wrong in the writing process */ + res = CURLE_WRITE_ERROR; + fprintf(config->errors, "(%d) Failed writing body\n", res); + } + } + else if(!outs.s_isreg && outs.stream) { + /* Dump standard stream buffered data */ + int rc = fflush(outs.stream); + if(!res && rc) { + /* something went wrong in the writing process */ + res = CURLE_WRITE_ERROR; + fprintf(config->errors, "(%d) Failed writing body\n", res); + } + } + +#ifdef __AMIGA__ + if(!res && outs.s_isreg && outs.filename) { + /* Set the url (up to 80 chars) as comment for the file */ + if(strlen(url) > 78) + url[79] = '\0'; + SetComment(outs.filename, url); + } +#endif + +#ifdef HAVE_UTIME + /* File time can only be set _after_ the file has been closed */ + if(!res && config->remote_time && outs.s_isreg && outs.filename) { + /* Ask libcurl if we got a remote file time */ + long filetime = -1; + curl_easy_getinfo(curl, CURLINFO_FILETIME, &filetime); + if(filetime >= 0) { + struct utimbuf times; + times.actime = (time_t)filetime; + times.modtime = (time_t)filetime; + utime(outs.filename, ×); /* set the time we got */ + } + } +#endif + /* No more business with this output struct */ + if(outs.alloc_filename) + Curl_safefree(outs.filename); + memset(&outs, 0, sizeof(struct OutStruct)); + + /* Free loop-local allocated memory and close loop-local opened fd */ + + Curl_safefree(outfile); + Curl_safefree(this_url); + + if(infdopen) { + close(infd); + infdopen = FALSE; + infd = STDIN_FILENO; + } + + /* upon error exit loop */ + if(res) + break; + + } /* loop to the next URL */ + + /* Free loop-local allocated memory */ + + Curl_safefree(uploadfile); + + if(urls) { + /* Free list of remaining URLs */ + glob_cleanup(urls); + urls = NULL; + } + + /* upon error exit loop */ + if(res) + break; + + } /* loop to the next globbed upload file */ + + /* Free loop-local allocated memory */ + + Curl_safefree(outfiles); + + if(inglob) { + /* Free list of globbed upload files */ + glob_cleanup(inglob); + inglob = NULL; + } + + /* Free this URL node data without destroying the + the node itself nor modifying next pointer. */ + Curl_safefree(urlnode->url); + Curl_safefree(urlnode->outfile); + Curl_safefree(urlnode->infile); + urlnode->flags = 0; + + /* TODO: Should CURLE_SSL_CACERT be included as critical error ? */ + + /* + ** Bail out upon critical errors + */ + switch(res) { + case CURLE_FAILED_INIT: + case CURLE_OUT_OF_MEMORY: + case CURLE_FUNCTION_NOT_FOUND: + case CURLE_BAD_FUNCTION_ARGUMENT: + goto quit_curl; + default: + /* Merrily loop to next URL */ + break; + } + + } /* for-loop through all URLs */ + + /* + ** Nested loops end here. + */ + + quit_curl: + + /* Free function-local referenced allocated memory */ + Curl_safefree(httpgetfields); + + /* Free list of given URLs */ + clean_getout(config); + + /* Cleanup the curl handle now that our + progressbar struct is still in scope */ + if(curl) { + curl_easy_cleanup(curl); + config->easy = curl = NULL; + } + if(easysrc) + curl_slist_append(easysrc, "curl_easy_cleanup(hnd);"); + + /* Close function-local opened file descriptors */ + + if(heads.fopened && heads.stream) + fclose(heads.stream); + if(heads.alloc_filename) + Curl_safefree(heads.filename); + + if(config->trace_fopened && config->trace_stream) + fclose(config->trace_stream); + + /* Dump the libcurl code if previously enabled. + NOTE: that this function relies on config->errors amongst other things + so not everything can be closed and cleaned before this is called */ + dumpeasysrc(config); + + if(config->errors_fopened && config->errors) + fclose(config->errors); + + main_free(); /* cleanup */ + + return res; +} + |