aboutsummaryrefslogtreecommitdiff
path: root/tests
diff options
context:
space:
mode:
Diffstat (limited to 'tests')
-rwxr-xr-xtests/runtests.pl265
1 files changed, 159 insertions, 106 deletions
diff --git a/tests/runtests.pl b/tests/runtests.pl
index 06d27462a..f6e897965 100755
--- a/tests/runtests.pl
+++ b/tests/runtests.pl
@@ -373,13 +373,125 @@ sub stopserver {
}
#######################################################################
+# Verify that the server that runs on $ip, $port is our server. This also
+# implies that we can speak with it, as there might be occasions when the
+# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
+# assign requested address" #
+
+sub verifyhttp {
+ my ($proto, $ip, $port) = @_;
+ my $cmd = "$CURL -m4 -o log/verifiedserver -ksvg \"$proto://$ip:$port/verifiedserver\" 2>log/verifyhttp";
+ my $pid;
+
+ # verify if our/any server is running on this port
+ print "CMD; $cmd\n" if ($verbose);
+ my $res = system($cmd);
+
+ $res >>= 8; # rotate the result
+ my $data;
+
+ if($res && $verbose) {
+ open(ERR, "<log/verifyhttp");
+ my @e = <ERR>;
+ close(ERR);
+ print "RUN: curl command returned $res\n";
+ for(@e) {
+ if($_ !~ /^([ \t]*)$/) {
+ print "RUN: $_";
+ }
+ }
+ }
+ open(FILE, "<log/verifiedserver");
+ my @file=<FILE>;
+ close(FILE);
+ $data=$file[0]; # first line
+
+ if ( $data =~ /WE ROOLZ: (\d+)/ ) {
+ $pid = 0+$1;
+ }
+ elsif($res == 6) {
+ # curl: (6) Couldn't resolve host '::1'
+ print "RUN: failed to resolve host\n";
+ return 0;
+ }
+ elsif($data || ($res != 7)) {
+ print "RUN: Unknown server is running on port $port\n";
+ return 0;
+ }
+ return $pid;
+}
+
+#######################################################################
+# Verify that the server that runs on $ip, $port is our server. This also
+# implies that we can speak with it, as there might be occasions when the
+# server runs fine but we cannot talk to it ("Failed to connect to ::1: Can't
+# assign requested address" #
+
+sub verifyftp {
+ my ($proto, $ip, $port) = @_;
+ my $pid;
+ my $time=time();
+ my $cmd="$CURL -m4 --silent -vg \"$proto://$ip:$port/verifiedserver\" 2>log/verifyftp";
+ # check if this is our server running on this port:
+ my @data=`$cmd`;
+ print "RUN: $cmd\n" if($verbose);
+ my $line;
+
+ # if this took more than 2 secs, we assume it "hung" on a weird server
+ my $took = time()-$time;
+
+ foreach $line (@data) {
+ if ( $line =~ /WE ROOLZ: (\d+)/ ) {
+ # this is our test server with a known pid!
+ $pid = 0+$1;
+ last;
+ }
+ }
+ if($pid <= 0 && $data[0]) {
+ # this is not a known server
+ print "RUN: Unknown server on our FTP port: $port\n";
+ return 0;
+ }
+ return $pid;
+}
+
+#######################################################################
+# Verify that the server that runs on $ip, $port is our server.
+# Retry during 5 seconds before giving up.
+#
+
+my %protofunc = ('http' => \&verifyhttp,
+ 'https' => \&verifyhttp,
+ 'ftp' => \&verifyftp);
+
+sub verifyserver {
+ my ($proto, $ip, $port) = @_;
+
+ my $count = 5; # try for this many seconds
+ my $pid;
+
+ while($count--) {
+ my $fun = $protofunc{$proto};
+
+ $pid = &$fun($proto, $ip, $port);
+
+ if($pid) {
+ last;
+ }
+ sleep(1);
+ }
+ return $pid;
+}
+
+
+
+#######################################################################
# start the http server
#
sub runhttpserver {
my ($verbose, $ipv6) = @_;
my $RUNNING;
my $pid;
- my $cmd;
my $pidfile = $HTTPPIDFILE;
my $port = $HTTPPORT;
my $ip = $HOSTIP;
@@ -395,55 +507,8 @@ sub runhttpserver {
$pid = checkserver($pidfile);
- if($pid <= 0 ) {
-
- # verify if our/any server is running on this port
- $cmd = "$CURL -o log/verifiedserver -g \"http://$ip:$port/verifiedserver\" 2>log/verifyhttp";
- print "CMD; $cmd\n" if ($verbose);
- my $res = system($cmd);
-
- $res >>= 8; # rotate the result
- my $data;
-
- if($res && $verbose) {
- open(ERR, "<log/verifystderr");
- my @e = <ERR>;
- close(ERR);
- print "RUN: curl command returned $res\n";
- for(@e) {
- if($_ !~ /^([ \t]*)$/) {
- print "RUN: $_";
- }
- }
- }
- open(FILE, "<log/verifiedserver");
- my @file=<FILE>;
- close(FILE);
- $data=$file[0]; # first line
-
- if ( $data =~ /WE ROOLZ: (\d+)/ ) {
- $pid = 0+$1;
- }
- elsif($res == 6) {
- # curl: (6) Couldn't resolve host '::1'
- print "RUN: failed to resolve host\n";
- return -3;
- }
- elsif($data || ($res != 7)) {
- print "RUN: Unknown server is running on port $port\n";
- return -2;
- }
- }
-
if($pid > 0) {
- my $res = kill (9, $pid); # die!
- if(!$res) {
- print "RUN: Failed to kill test HTTP$nameext server, do it ",
- "manually and restart the tests.\n";
- stopservers($verbose);
- exit;
- }
- sleep(1);
+ stopserver($pid);
}
my $flag=$debugprotocol?"-v ":"";
@@ -451,7 +516,8 @@ sub runhttpserver {
if($dir) {
$flag .= "-d \"$dir\" ";
}
- $cmd="$perl $srcdir/httpserver.pl -p $pidfile $flag $port $ipv6";
+
+ my $cmd="$perl $srcdir/httpserver.pl -p $pidfile $flag $port $ipv6";
my ($httppid, $pid2) =
startnew($cmd, $pidfile); # start the server in a new process
@@ -462,6 +528,14 @@ sub runhttpserver {
exit;
}
+ # Server is up. Verify that we can speak to it.
+ if(!verifyserver("http", $ip, $port)) {
+ print "RUN: HTTP$nameext server failed verification\n";
+ # failed to talk to it properly. Kill the server and return failure
+ stopserver("$httppid $pid2");
+ return (0,0);
+ }
+
if($verbose) {
print "RUN: HTTP$nameext server is now running PID $httppid\n";
}
@@ -475,14 +549,20 @@ sub runhttpserver {
# start the https server (or rather, tunnel)
#
sub runhttpsserver {
- my $verbose = $_[0];
+ my ($verbose, $ipv6) = @_;
my $STATUS;
my $RUNNING;
+ my $ip = $HOSTIP;
if(!$stunnel) {
return 0;
}
+ if($ipv6) {
+ # not complete yet
+ $ip = $HOST6IP;
+ }
+
my $pid=checkserver($HTTPSPIDFILE);
if($pid > 0) {
@@ -502,6 +582,14 @@ sub runhttpsserver {
exit;
}
+ # Server is up. Verify that we can speak to it.
+ if(!verifyserver("https", $ip, $HTTPSPORT)) {
+ print "RUN: HTTPS server failed verification\n";
+ # failed to talk to it properly. Kill the server and return failure
+ stopserver("$httpspid $pid2");
+ return (0,0);
+ }
+
if($verbose) {
print "RUN: HTTPS server is now running PID $httpspid\n";
}
@@ -511,7 +599,6 @@ sub runhttpsserver {
return ($httpspid, $pid2);
}
-
#######################################################################
# start the ftp server
#
@@ -524,6 +611,7 @@ sub runftpserver {
my $pidfile = $id?$FTP2PIDFILE:$FTPPIDFILE;
my $ip=$HOSTIP;
my $nameext;
+ my $cmd;
if($ipv6) {
# if IPv6, use a different setup
@@ -534,46 +622,13 @@ sub runftpserver {
}
my $pid = checkserver($pidfile);
-
- if ($pid <= 0) {
- print "RUN: Check port $port for the FTP$id$nameext server\n"
- if ($verbose);
-
- my $time=time();
- my $cmd="$CURL -m4 --silent -vg \"ftp://$ip:$port/verifiedserver\" 2>log/verifyftp";
- # check if this is our server running on this port:
- my @data=`$cmd`;
- print "RUN: $cmd\n" if($verbose);
- my $line;
-
- # if this took more than 2 secs, we assume it "hung" on a weird server
- my $took = time()-$time;
-
- foreach $line (@data) {
- if ( $line =~ /WE ROOLZ: (\d+)/ ) {
- # this is our test server with a known pid!
- $pid = 0+$1;
- }
- }
- if($pid <= 0 && $data[0]) {
- # this is not a known server
- print "RUN: Unknown server on our favourite FTP$nameext port: $port\n";
- return -1;
- }
- }
-
- if($pid > 0) {
- print "RUN: Killing a previous server using pid $pid\n" if($verbose);
- my $res = kill(9, $pid); # die!
- if(!$res) {
- print "RUN: Failed to kill FTP$id$nameext test server, do it manually and",
- " restart the tests.\n";
- return -1;
- }
+ if($pid >= 0) {
+ stopserver($pid);
}
+ # kill possible still-running slaves
ftpkillslaves($verbose);
- # now (re-)start our server:
+ # start our server:
my $flag=$debugprotocol?"-v ":"";
$flag .= "-s \"$srcdir\" ";
if($id) {
@@ -582,7 +637,7 @@ sub runftpserver {
if($ipv6) {
$flag .="--ipv6 ";
}
- my $cmd="$perl $srcdir/ftpserver.pl --pidfile $pidfile $flag --port $port";
+ $cmd="$perl $srcdir/ftpserver.pl --pidfile $pidfile $flag --port $port";
my ($ftppid, $pid2) = startnew($cmd, $pidfile);
@@ -592,16 +647,12 @@ sub runftpserver {
return -1;
}
- # Make sure there is a pidfile present before we proceed. Because if we
- # don't see one within a few secs, the server doesn't work. This mostly
- # happens when the server finds out it cannot use the ipv6 protocol.
- my $count=3;
- while(! -f $pidfile) {
- if(!$count--) {
- print "RUN: failed starting FTP$id$nameext server (no pidfile)!\n";
- return -1;
- }
- sleep(1);
+ # Server is up. Verify that we can speak to it.
+ if(!verifyserver("ftp", $ip, $port)) {
+ print "RUN: FTP$id$nameext server failed verification\n";
+ # failed to talk to it properly. Kill the server and return failure
+ stopserver("$ftppid $pid2");
+ return (0,0);
}
if($verbose) {
@@ -917,6 +968,7 @@ sub singletest {
my @what;
my $why;
my %feature;
+ my $cmd;
# load the test case file definition
if(loadtest("${TESTDIR}/test${testnum}")) {
@@ -997,7 +1049,7 @@ sub singletest {
if(!$why) {
my @precheck = getpart("client", "precheck");
- my $cmd = $precheck[0];
+ $cmd = $precheck[0];
chomp $cmd;
if($cmd) {
my @o = `$cmd 2>/dev/null`;
@@ -1109,7 +1161,8 @@ sub singletest {
}
# get the command line options to use
- my ($cmd, @blaha)= getpart("client", "command");
+ my @blaha;
+ ($cmd, @blaha)= getpart("client", "command");
# make some nice replace operations
$cmd =~ s/\n//g; # no newlines please
@@ -1124,9 +1177,9 @@ sub singletest {
my @inputfile=getpart("client", "file");
if(@inputfile) {
# we need to generate a file before this test is invoked
- my %hash = getpartattr("client", "file");
+ my %fileattr = getpartattr("client", "file");
- my $filename=$hash{'name'};
+ my $filename=$fileattr{'name'};
if(!$filename) {
print "ERROR: section client=>file has no name attribute!\n";
@@ -1547,8 +1600,8 @@ sub stopservers {
my $pid;
foreach $pid (split(" ", $pids)) {
- printf ("* kill pid for %-5s => %-5d\n",
- $server, $pid) if($verbose);
+ printf("* kill pid for %-5s => %-5d\n",
+ $server, $pid) if($verbose);
stopserver($pid);
}
}