aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-05Martin Skinner brought back bug report #1230118 to haunt us once again.Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1230118) curl_getdate() did not work properly for all input dates on Windows. It was mostly seen on some TZ time zones using DST. Luckily, Martin also provided a fix.
2006-12-05Alexey Simak filed bug report #1600447Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1600447) in which he noted that active FTP connections don't work with the multi interface. The problem is here that the multi interface state machine has a state during which it can wait for the data connection to connect, but the active connection is not done in the same step in the sequence as the passive one is so it doesn't quite work for active. The active FTP code still use a blocking function to allow the remote server to connect. The fix (work-around is a better word) for this problem is to set the boolean prematurely that the data connection is completed, so that the "wait for connect" phase ends at once.
2006-12-05Matt Witherspoon fixed a problem case when the CPU load went to 100% when aDaniel Stenberg
HTTP upload was disconnected: "What appears to be happening is that my system (Linux 2.6.17 and 2.6.13) is setting *only* POLLHUP on poll() when the conditions in my previous mail occur. As you can see, select.c:Curl_select() does not check for POLLHUP. So basically what was happening, is poll() was returning immediately (with POLLHUP set), but when Curl_select() looked at the bits, neither POLLERR or POLLOUT was set. This still caused Curl_readwrite() to be called, which quickly returned. Then the transfer() loop kept continuing at full speed forever."
2006-12-05curl.dsmirror.nl is another mirrorDaniel Stenberg
2006-12-05fixed in CVSDaniel Stenberg
2006-12-03fix the libssh2 include path somewhat when --with-libssh2 is used and addedDaniel Stenberg
a warning output if no OpenSSL was found
2006-12-01CURLOPT_CLOSEPOLICY can't be setDaniel Stenberg
2006-12-01Toon Verwaest reported that there are servers that send the Content-Range:Daniel Stenberg
header in a third, not suppported by libcurl, format and we agreed that we could make the parser more forgiving to accept all the three found variations.
2006-11-30the extra copy of downloads should be fixed tooDaniel Stenberg
2006-11-29two moreDaniel Stenberg
2006-11-29Is CURLOPT_FORBID_REUSE broken?Daniel Stenberg
2006-11-27adding notes of what to work on and fix before next releaseDaniel Stenberg
2006-11-27no need to access it with conn->data since data is already a local variableDaniel Stenberg
holding the conn->data value
2006-11-25added the new test 282Daniel Stenberg
2006-11-25Venkat Akella found out that libcurl did not like HTTP responses that simplyDaniel Stenberg
responded with a single status line and no headers nor body. Starting now, a HTTP response on a persistent connection (i.e not set to be closed after the response has been taken care of) must have Content-Length or chunked encoding set, or libcurl will simply assume that there is no body. To my horror I learned that we had no less than 57(!) test cases that did bad HTTP responses like this, and even the test http server (sws) responded badly when queried by the test system if it is the test system. So although the actual fix for the problem was tiny, going through all the newly failing test cases got really painful and boring.
2006-11-25James Housley fixed SCP downloading by setting the maxdownload.Daniel Stenberg
2006-11-25Make sure RETSIGTYPE is properly definedYang Tse
2006-11-24James Housley did lots of work and introduced SFTP downloads.Daniel Stenberg
2006-11-24Define HAVE_SIGNAL_H, HAVE_SIG_ATOMIC_T and HAVE_SIG_ATOMIC_T_VOLATILEYang Tse
as appropriate for platforms that don't have autotools support
2006-11-22Michael Wallner fixed this problem: When I set domains in the optionsDaniel Stenberg
struct, and there are domain/search entries in /etc/resolv.conf, the domains of the options struct will be overridden.
2006-11-22Install ares_dns.h tooDaniel Stenberg
2006-11-22Added a check in configure that verifies if <signal.h> is available,Yang Tse
defining HAVE_SIGNAL_H if the header is available. Added a check in configure that tests if the sig_atomic_t type is available, defining HAVE_SIG_ATOMIC_T if it is available. Providing a suitable default in setup_once.h if not available. Added a check in configure that tests if the sig_atomic_t type is already defined as volatile, defining HAVE_SIG_ATOMIC_T_VOLATILE if it is available and already defined as volatile.
2006-11-21new french mirrorDaniel Stenberg
2006-11-20Revert ftpserver.pl back to revision 1.74 Adding change done in 1.76Yang Tse
This is done to back out changes done in revisions 1.77 and 1.75
2006-11-20Revert runtests.pl back to revision 1.212Yang Tse
This is done to back out changes done from revisions 1.213 to 1.217
2006-11-20Revert ftp.pm back to revision 1.5 Adding copyright notice.Yang Tse
This is done to back out changes done from revisions 1.6 to 1.10
2006-11-20Add some message loggingYang Tse
2006-11-20stop slaves before stopping serversYang Tse
2006-11-20Revert to KILL test servers until all test serversYang Tse
have proper TERM and INT signal handlers implemented.
2006-11-19log the sleep, like when done in test 190Daniel Stenberg
2006-11-19Frank Teo provided an updated, mostly docs changedDaniel Stenberg
2006-11-19Avoid passing child pid and test server pid, using the runningYang Tse
servers hash, and adjust message arguments accordingly.
2006-11-19Comment out the use of the "warnings" module now that ftp.pm seems toYang Tse
be clear of warnings. Uncomment it if this module is further modified. The "warnings" module requires perl 5.006 or later. Previous perl versions don't have it and die on missing modules.
2006-11-18new ruby binding, new tclcurl releaseDaniel Stenberg
2006-11-18Avoid keeping dupe pids When forked pid and test server pid is the same one.Yang Tse
2006-11-18Fix warning "Use of uninitialized value in ...".Yang Tse
If the list has only one item avoid sort subroutine.
2006-11-17The hash of running servers is now a hash of hashes which for each runningYang Tse
server holds not only its two main pids, but also the pidfile of the test server and the 'slavepidfiles' for ftp* servers. This allows a better control when stopping servers. Now from runtests.pl when test servers are stopped they are signalled in sequence TERM, INT and KILL allowing time in between for them to die. This will give us a chance of gracefully stopping test servers, which we didn't have when we were killing them in first instance.
2006-11-15Call libssh2_session_free() to release memory allocated duringGisle Vanem
libssh2 startup.
2006-11-14Free 'scp->path' in case of libssh2 setup failure.Gisle Vanem
2006-11-13Ron in bug #1595348 (http://curl.haxx.se/bug/view.cgi?id=1595348) pointedDaniel Stenberg
out a stack overwrite (and the corresponding fix) on 64bit Windows when dealing with HTTP chunked encoding.
2006-11-13bug #1595348 by Ron pointed out this flaw and fixDaniel Stenberg
2006-11-13Tor Arntsen spotted this mistakeDaniel Stenberg
2006-11-11we did 1.3.2 and are now on the 1.3.3 track!Daniel Stenberg
2006-11-11fix header to match actual protoDaniel Stenberg
2006-11-11cleaned up Curl_write() and the sub functions it uses for various protocols.Daniel Stenberg
They all now return ssize_t to Curl_write(). Unfortunately, Curl_read() is in a sorrier state but it too would benefit from a similar cleanup.
2006-11-09Nir Soffer updated libcurl.framework.make: fix symlinks, should link toDaniel Stenberg
Versions, not to ./Versions and indentation improvments
2006-11-09Dmitriy Sergeyev found a SIGSEGV with his test04.c example posted on 7 NovDaniel Stenberg
2006. It turned out we wrongly assumed that the connection cache was present when tearing down a connection.
2006-11-09Ciprian Badescu found a SIGSEGV when doing multiple TFTP transfers using theDaniel Stenberg
multi interface, but I could also repeat it doing multiple sequential ones with the easy interface. Using Ciprian's test case, I could fix it.
2006-11-09Remove showing stderr log files unconditionally for tests 518 and 537.Yang Tse
Add failure checking for servers when fork()ed. Use same code path in 'stopserver' when called with a single or multiple pids.
2006-11-08Bradford Bruce reported that when setting CURLOPT_DEBUGFUNCTION withoutDaniel Stenberg
CURLOPT_VERBOSE set to non-zero, you still got a few debug messages from the SSL handshake. This is now stopped.