aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2006-12-1937. Having more than one connection to the same host when doing NTLMDaniel Stenberg
authentication (with performs multiple "passes" and authenticates a connection rather than a HTTP request), and particularly when using the multi interface, there's a risk that libcurl will re-use a wrong connection when doing the different passes in the NTLM negotiation and thus fail to negotiate (in seemingly mysterious ways). 36. --limit-rate (CURLOPT_MAX_SEND_SPEED_LARGE and CURLOPT_MAX_RECV_SPEED_LARGE) are broken on Windows (since 7.16.0, but that's when they were introduced as previous to that the limiting logic was made in the application only and not in the library). This problem is easily repeated and it takes a Windows person to fire up his/hers debugger in order to fix. http://curl.haxx.se/bug/view.cgi?id=1603712
2006-12-16recv() doesn't take MSG_NOSIGNAL in its forth argument so let's not pass it.Daniel Stenberg
Brendan Jurd pointed out.
2006-12-16Brendan Jurd provided a fix that now prevents libcurl from getting a SIGPIPEDaniel Stenberg
during certain conditions when GnuTLS is used.
2006-12-16Brendan Jurd pointed out these typosDaniel Stenberg
2006-12-15Plug more leaks.Gisle Vanem
2006-12-15Fix typo.Gisle Vanem
2006-12-14minor syntax mistakeDaniel Stenberg
2006-12-14Free 'config->iface' if set.Gisle Vanem
2006-12-11ahost.exe needs getopt.obj.Gisle Vanem
2006-12-11Alexey Simak found out that when doing FTP with the multi interface andDaniel Stenberg
something went wrong like it got a bad response code back from the server, libcurl would leak memory. Added test case 538 to verify the fix. I also noted that the connection would get cached in that case, which doesn't make sense since it cannot be re-use when the authentication has failed. I fixed that issue too at the same time, and also that the path would be "remembered" in vain for cases where the connection was about to get closed.
2006-12-11PROT_CLOSEACTION doesn't have to be its own bit but can just as well justDaniel Stenberg
include the protocol bits of such actions, which currently only means FTP
2006-12-07fixed the printf formatting after I changed the type of 'excess'Daniel Stenberg
2006-12-067.16.1 knows SFTP tooDaniel Stenberg
2006-12-06clarify --limit-rate somewhat: it might send away/receive chunks of date inDaniel Stenberg
temporarily higher speeds than requested, but the given limiting is considered "over time" and is an average
2006-12-06Sebastien Willemijns reported bug #1603712Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1603712) which is about connections getting cut off prematurely when --limit-rate is used. While I found no such problems in my tests nor in my reading of the code, I found that the --limit-rate code was severly flawed (since it was moved into the lib, since 7.15.5) when used with the easy interface and it didn't work as documented so I reworked it somewhat and now it works for my tests.
2006-12-05Stefan Krause pointed out a compiler warning with a picky MSCV compiler whenDaniel Stenberg
passing a curl_off_t argument to the Curl_read_rewind() function which takes an size_t argument. Curl_read_rewind() also had debug code left in it and it was put in a different source file with no good reason when only used from one single spot.
2006-12-05removed the final traces of the closepolicy optionDaniel Stenberg
2006-12-05update after today's workDaniel Stenberg
2006-12-05Sh Diao reported that CURLOPT_CLOSEPOLICY doesn't work, and indeed, there isDaniel Stenberg
no code present in the library that receives the option. Since it was not possible to use, we know that no current users exist and thus we simply removed it from the docs and made the code always use the default path of the code.
2006-12-05Jared Lundell filed bug report #1604956Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1604956) which identified setting CURLOPT_MAXCONNECTS to zero caused libcurl to SIGSEGV. Starting now, libcurl will always internally use no less than 1 entry in the connection cache.
2006-12-05better preprocessor check for recent MSVC versionsDaniel Stenberg
2006-12-05CURLOPT_FORBID_REUSE works again with a cleaned up order of doing things inDaniel Stenberg
Curl_done()
2006-12-05oops, fix belonging to the previous curl_getdate() fix since it makes MSVCDaniel Stenberg
use gmtime_r
2006-12-05Martin Skinner brought back bug report #1230118 to haunt us once again.Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1230118) curl_getdate() did not work properly for all input dates on Windows. It was mostly seen on some TZ time zones using DST. Luckily, Martin also provided a fix.
2006-12-05Alexey Simak filed bug report #1600447Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=1600447) in which he noted that active FTP connections don't work with the multi interface. The problem is here that the multi interface state machine has a state during which it can wait for the data connection to connect, but the active connection is not done in the same step in the sequence as the passive one is so it doesn't quite work for active. The active FTP code still use a blocking function to allow the remote server to connect. The fix (work-around is a better word) for this problem is to set the boolean prematurely that the data connection is completed, so that the "wait for connect" phase ends at once.
2006-12-05Matt Witherspoon fixed a problem case when the CPU load went to 100% when aDaniel Stenberg
HTTP upload was disconnected: "What appears to be happening is that my system (Linux 2.6.17 and 2.6.13) is setting *only* POLLHUP on poll() when the conditions in my previous mail occur. As you can see, select.c:Curl_select() does not check for POLLHUP. So basically what was happening, is poll() was returning immediately (with POLLHUP set), but when Curl_select() looked at the bits, neither POLLERR or POLLOUT was set. This still caused Curl_readwrite() to be called, which quickly returned. Then the transfer() loop kept continuing at full speed forever."
2006-12-05curl.dsmirror.nl is another mirrorDaniel Stenberg
2006-12-05fixed in CVSDaniel Stenberg
2006-12-03fix the libssh2 include path somewhat when --with-libssh2 is used and addedDaniel Stenberg
a warning output if no OpenSSL was found
2006-12-01CURLOPT_CLOSEPOLICY can't be setDaniel Stenberg
2006-12-01Toon Verwaest reported that there are servers that send the Content-Range:Daniel Stenberg
header in a third, not suppported by libcurl, format and we agreed that we could make the parser more forgiving to accept all the three found variations.
2006-11-30the extra copy of downloads should be fixed tooDaniel Stenberg
2006-11-29two moreDaniel Stenberg
2006-11-29Is CURLOPT_FORBID_REUSE broken?Daniel Stenberg
2006-11-27adding notes of what to work on and fix before next releaseDaniel Stenberg
2006-11-27no need to access it with conn->data since data is already a local variableDaniel Stenberg
holding the conn->data value
2006-11-25added the new test 282Daniel Stenberg
2006-11-25Venkat Akella found out that libcurl did not like HTTP responses that simplyDaniel Stenberg
responded with a single status line and no headers nor body. Starting now, a HTTP response on a persistent connection (i.e not set to be closed after the response has been taken care of) must have Content-Length or chunked encoding set, or libcurl will simply assume that there is no body. To my horror I learned that we had no less than 57(!) test cases that did bad HTTP responses like this, and even the test http server (sws) responded badly when queried by the test system if it is the test system. So although the actual fix for the problem was tiny, going through all the newly failing test cases got really painful and boring.
2006-11-25James Housley fixed SCP downloading by setting the maxdownload.Daniel Stenberg
2006-11-25Make sure RETSIGTYPE is properly definedYang Tse
2006-11-24James Housley did lots of work and introduced SFTP downloads.Daniel Stenberg
2006-11-24Define HAVE_SIGNAL_H, HAVE_SIG_ATOMIC_T and HAVE_SIG_ATOMIC_T_VOLATILEYang Tse
as appropriate for platforms that don't have autotools support
2006-11-22Michael Wallner fixed this problem: When I set domains in the optionsDaniel Stenberg
struct, and there are domain/search entries in /etc/resolv.conf, the domains of the options struct will be overridden.
2006-11-22Install ares_dns.h tooDaniel Stenberg
2006-11-22Added a check in configure that verifies if <signal.h> is available,Yang Tse
defining HAVE_SIGNAL_H if the header is available. Added a check in configure that tests if the sig_atomic_t type is available, defining HAVE_SIG_ATOMIC_T if it is available. Providing a suitable default in setup_once.h if not available. Added a check in configure that tests if the sig_atomic_t type is already defined as volatile, defining HAVE_SIG_ATOMIC_T_VOLATILE if it is available and already defined as volatile.
2006-11-21new french mirrorDaniel Stenberg
2006-11-20Revert ftpserver.pl back to revision 1.74 Adding change done in 1.76Yang Tse
This is done to back out changes done in revisions 1.77 and 1.75
2006-11-20Revert runtests.pl back to revision 1.212Yang Tse
This is done to back out changes done from revisions 1.213 to 1.217
2006-11-20Revert ftp.pm back to revision 1.5 Adding copyright notice.Yang Tse
This is done to back out changes done from revisions 1.6 to 1.10
2006-11-20Add some message loggingYang Tse