Age | Commit message (Collapse) | Author |
|
These tests are also doing UTF-8 SMTP.
Follow-up to df207d2dd93b9e73
|
|
|
|
|
|
Fixes #4988
Closes #4992
|
|
Due to the merge/revert cycle
|
|
This reverts commit 87869e38d7afdec3ef1bb4965711458b088e254f.
Fixes #5014
Closes #5015
Reopens #4833
|
|
This reverts commit ed0f357f7d25566110d4302f33759f4ffb5a6f83.
|
|
This reverts commit b2caaa0681f329eed317ffb6ae6927f4a539f0c1.
|
|
... also updated the HTTP3 build description for ngtcp2 accordingly.
|
|
New test 666 checks this is effective.
As upload buffer size is significant in this kind of tests, shorten it
in similar test 652.
Fixes #4860
Reported-by: RuurdBeerstra on github
|
|
Input buffer filling may delay the data sending if data reads are slow.
To overcome this problem, file and callback data reads do not accumulate
in buffer anymore. All other data (memory data and mime framing) are
considered as fast and still concatenated in buffer.
As this may highly impact performance in terms of data overhead, an early
end of part data check is added to spare a read call.
When encoding a part's data, an encoder may require more bytes than made
available by a single read. In this case, the above rule does not apply
and reads are performed until the encoder is able to deliver some data.
Tests 643, 644, 645, 650 and 654 have been adapted to the output data
changes, with test data size reduced to avoid the boredom of long lists of
1-byte chunks in verification data.
New test 664 checks mimepost using single-byte read callback with encoder.
New test 665 checks the end of part data early detection.
Fixes #4826
Reported-by: MrdUkk on github
|
|
In case a read callback returns a status (pause, abort, eof,
error) instead of a byte count, drain the bytes read so far but
remember this status for further processing.
Takes care of not losing data when pausing, and properly resume a
paused mime structure when requested.
New tests 670-673 check unpausing cases, with easy or multi
interface and mime or form api.
Fixes #4813
Reported-by: MrdUkk on github
Closes #4833
|
|
371:17: warning: conversion to 'unsigned char' from 'int' may alter its
value [-Wconversion]
Closes #5008
|
|
tool_metalink only supports cryptography from OpenSSL, GnuTLS, NSS,
The Win32 Crypto library and Apple's Common Crypto library.
If an TLS backend such as mbedTLS or WolfSSL is specified then the
following error is given during compilation along, with a load of
unresolved extern errors:
Can't compile METALINK support without a crypto library.
Reviewed-by: Daniel Stenberg
Closes #5006
|
|
Make the configure step more descriptive and align others.
|
|
|
|
For security reasons the access token is not available to PR builds.
Therefore we should not try to use the DevOps API with an empty token.
|
|
... as there's nothing in the code that actually uses the define! The
last reference was removed in 38203f158.
Closes #5007
|
|
- remove check for unsupported old CMake versions
- do not link to c-ares library twice
- modernize custom Find modules
- FindLibSSH2:
- pass version to FPHSA to show it in the output
- use LIBSSH2_VERSION define to extract the version number in
one shot. This variable exists in the header for 10 years.
- remove unneeded code
- FindNGHTTP2.cmake:
- drop needless FPHSA argument
- mark found variables as advanced
- FindNSS.cmake:
- show version number
- FindCARES.cmake:
- drop default paths
- use FPHSA instead of checking things by hand
- remove needless explict variable dereference
- simplify count_true()
- allow all policies up to version 3.16 to be set to NEW
- do not rerun check for -Wstrict-aliasing=3 every time
In contrast to every other compiler flag this has a = in it, which CMake
can't have in a variable name.
- only read the interesting strings from curlver.h
Reviewed-by: Peter Wu
Closes https://github.com/curl/curl/pull/4975
|
|
- Record only the command of the most recently ran test in the command
log.
This is a follow-up to 02988b7 from several weeks ago which fixed
writing to the command log, however it saved all commands for all tests
instead of just the most recently ran test as we would now expect.
Fixes https://github.com/curl/curl/commit/02988b7#commitcomment-37546876
Closes https://github.com/curl/curl/pull/5001
|
|
Follow up to 6357a19f.
Reviewed-by: Daniel Stenberg
Closes #5004
|
|
Reviewed-by: Steve Holme
Closes #5005
|
|
Reviewed-by: Jay Satiro
Closes #4980
|
|
|
|
Closes #4983
|
|
|
|
... since the socket might not actually be readable anymore when for
example the data is already buffered in the TLS layer.
Fixes #4966
Reported-by: Anders Berg
Closes #5000
|
|
Suggested-by: Kristian Mide
Closes #4941
|
|
Detected by Coverity. CID 1418139.
Also, make sure to return error if the new 'from' allocation fails.
Closes #4997
|
|
Follow-up from #4960: now make it fail if it detects problems.
Closes #4998
|
|
Recently added tests increased their runtime above the limit of 60min.
|
|
|
|
|
|
|
|
The log file with all command lines for the invoked command lines is now
called logs/commands.log
Fixes #4911
Closes #4989
|
|
Detected by Coverity. CID 1418139. "leaked_storage: Variable 'from'
going out of scope leaks the storage it points to"
Closes #4990
|
|
Reverts the functionality from 41fcb4f when compiling with GnuTLS older
than 3.5.0.
Reviewed-by: Daniel Stenberg
Closes #4984
|
|
|
|
Make the function tolerate a NULL pointer input to avoid dereferencing
that pointer.
Follow-up to efce3ea5a85126d
Detected by OSS-Fuzz
Reviewed-By: Steve Holme
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=20907
Fixes #4985
Closes #4986
|
|
|
|
This reduces the HTTP/2 window size to 32 MB since libcurl might have to
buffer up to this amount of data in memory and yet we don't want it set
lower to potentially impact tranfer performance on high speed networks.
Requires nghttp2 commit b3f85e2daa629
(https://github.com/nghttp2/nghttp2/pull/1444) to work properly, to end
up in the next release after 1.40.0.
Fixes #4939
Closes #4940
|
|
Previously, it was not possible to get a known hosts file entry due to
the lack of an API. ssh_session_get_known_hosts_entry(), introduced in
libssh-0.9.0, allows libcurl to obtain such information and behave the
same as when compiled with libssh2.
This also tries to avoid the usage of deprecated functions when the
replacements are available. The behaviour will not change if versions
older than libssh-0.8.0 are used.
Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
Fixes #4953
Closes #4962
|
|
It is still possible to override the executable to run during the test,
using the <tool> tag, but this patch removes the requirement that the
tag must be present for unit tests.
It also removes the possibility of human error when existing test cases
are used as the basis for new tests, as recently witnessed in 81c37124.
Reviewed-by: Daniel Stenberg
Closes #4976
|
|
|
|
... as it will always be non-NULL at this point.
Detected by Coverity: CID 1459009
|
|
When doing a request with a body + Expect: 100-continue and the server
responds with a 417, the same request will be retried immediately
without the Expect: header.
Added test 357 to verify.
Also added a control instruction to tell the sws test server to not read
the request body if Expect: is present, which the new test 357 uses.
Reported-by: bramus on github
Fixes #4949
Closes #4964
|
|
Closes #4892
|
|
Simply notify the server we support the SMTPUTF8 extension if it does.
|
|
|
|
Note: The RCPT TO command isn't required to advertise to the server that
it contains UTF-8 characters, instead the server is told that a mail may
contain UTF-8 in any envelope command via the MAIL command.
|