aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2014-11-13http2: fix switched macro when http2 is not enabledDaniel Stenberg
2014-11-13http2: Deal with HTTP/2 data inside response header bufferTatsuhiro Tsujikawa
Previously if HTTP/2 traffic is appended to HTTP Upgrade response header (thus they are in the same buffer), the trailing HTTP/2 traffic is not processed and lost. The appended data is most likely SETTINGS frame. If it is lost, nghttp2 library complains server does not obey the HTTP/2 protocol and issues GOAWAY frame and curl eventually drops connection. This commit fixes this problem and now trailing data is processed.
2014-11-11configure: Fixed inclusion of krb5 when CURL_DISABLE_CRYPTO_AUTH is definedSteve Holme
Commit fe0f8967bf fixed a problem with krb5 not being defined as a supported feature when HAVE_GSSAPI is defined, however, it should only be included if CURL_DISABLE_CRYPTO_AUTH is not set, like when SPNEGO is listed as a feature.
2014-11-10multi: removed Curl_multi_set_easy_connectionDaniel Stenberg
It isn't used anywhere! Reported-by: Carlo Wood
2014-11-10symbol-scan.pl: do not require autotoolsPeter Wu
Makes test1119 pass when building with cmake. configurehelp.pm is generated by configure (autotools). As cmake does not provide a separate variable for the C preprocessor, default to cpp. Before commit ef24ecde68a5f577a7f0f423a767620f09a0ab16 ("symbol-scan: use configure script knowledge about how to run the C preprocessor"), this tool would also use 'cpp'. Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-10cmake: add ENABLE_THREADED_RESOLVER, rename ARESPeter Wu
Fix detection of the AsynchDNS feature which not just depends on pthreads support, but also on whether USE_POSIX_THREADS is set or not. Caught by test 1014. This patch adds a new ENABLE_THREADED_RESOLVER option (corresponding to --enable-threaded-resolver of autotools) which also needs a check for HAVE_PTHREAD_H. For symmetry with autotools, CURL_USE_ARES is renamed to ENABLE_ARES (--enable-ares). Checks that test for the availability actually use USE_ARES instead as that is the result of whether a-res is available or not (in practice this does not matter as CARES is marked as required package, but nevertheless it is better to write the intent). Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-10cmake: build libhostname for test suitePeter Wu
Used by some test cases via LD_PRELOAD in order to fake the host name. Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-10cmake: fix HAVE_GETHOSTNAME definitionPeter Wu
Otherwise Curl_gethostname always fails. Windows has gethostname since Vista according to http://msdn.microsoft.com/en-us/library/ms738527%28VS.85%29.aspx, but accordings to byte_bucket's VC 2005 documentation, it is available even in Windows 95. (possibly after installing a Platform SDK, the Windows Server 2003 SP1 Platform SDK should be sufficient). Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-10tests: fix libhostname visibilityPeter Wu
I noticed that a patched cmake build would pass tests with a fake local hostname, but the autotools build skips them: got unexpected host name back, LD_PRELOAD failed It turns out that -fvisibility=hidden hides the symbol, and since the tests are not part of libcurl, it fails too. Just remove the LIBCURL guard. Broken since cURL 7.30 (commit 83a42ee20ea7fc25abb61c0b7ef56ebe712d7093, "curl.h: stricter CURL_EXTERN linkage decorations logic"). Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-10tests: fix memleak in server/resolve.cPeter Wu
This makes LeakSanitizer happy. Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-10configure: assume krb5 when gss-api worksDaniel Stenberg
To please test 1014 while we work out if this is truly the a correct assumption.
2014-11-09vtls.h: Fixed compiler warning when compiled without SSLSteve Holme
vtls.c:185:46: warning: unused parameter 'data'
2014-11-09RELEASE-NOTES: Synced with 2fbf23875fSteve Holme
2014-11-09ntlm: Added separate SSPI based functionsSteve Holme
In preparation for moving the NTLM message code into the SASL module, and separating the native code from the SSPI code, added functions that simply call the functions in curl_ntlm_msg.c.
2014-11-09http_ntlm: Use the SASL functions insteadSteve Holme
In preparation for moving the NTLM message code into the SASL module use the SASL functions in the HTTP code instead.
2014-11-09libssh2: detect features based on version, not configure checksDaniel Stenberg
... so that non-configure builds get the correct functions too based on the libssh2 version used.
2014-11-09SSH: use the port number as well for known_known checksNobuhiro Ban
... if the libssh2 version is new enough. Bug: http://curl.haxx.se/bug/view.cgi?id=1448
2014-11-09INSTALL: Updated pre-processor references to the old VC6 project filesSteve Holme
Reworked the two sections that discuss modifying the Visual Studio pre- processor settings, and vc6libcurl.dsw/vc6libcurl.dsp, to remove the project files references as they have been superseded by a more thorough set of project files for VC6 through VC12, but to also give the correct reference to this setting in later versions of Visual Studio.
2014-11-09INSTALL: Added email protocols to the "Disabling in Win32 builds" sectionSteve Holme
2014-11-09configure: Fixed NTLM missing from features when CURL_DISABLE_HTTP definedSteve Holme
2014-11-09build: Fixed no NTLM support for email when CURL_DISABLE_HTTP is definedSteve Holme
USE_NTLM would only be defined if: HTTP support was enabled, NTLM and cryptography weren't disabled, and either a supporting cryptography library or Windows SSPI was being compiled against. This means it was not possible to build libcurl without HTTP support and use NTLM for other protocols such as IMAP, POP3 and SMTP. Rather than introduce a new SASL pre-processor definition, removed the HTTP prerequisite just like USE_SPNEGO and USE_KRB5. Note: Winbind support still needs to be dependent on CURL_DISABLE_HTTP as it is only available to HTTP at present. This bug dates back to August 2011 when I started to add support for NTLM to SMTP.
2014-11-09ntlm: Removed an unnecessary free of native Target InfoSteve Holme
Due to commit 40ee1ba0dc the free in Curl_ntlm_decode_type2_target() is longer required.
2014-11-09ntlm: Moved the native Target Info clean-up from HTTP specific functionSteve Holme
2014-11-09ntlm: Moved SSPI clean-up code into SASL moduleSteve Holme
2014-11-08Makefile.dist: Added support for WinIDNSteve Holme
2014-11-08Makefile.vc6: Added support for WinIDNSteve Holme
2014-11-08Makefile.dist: Added some missing SSPI configurationsSteve Holme
2014-11-08Makefile.dist: Separated the groups of SSL configurations from each otherSteve Holme
2014-11-08Makefile.dist: Grouped the x64 configurations next to their x86 counterpartsSteve Holme
2014-11-07curl.h: Tidy up of CURL_VERSION_* flagsSteve Holme
As the list has gotten a little messy and hard to read, especially with the introduction of deprecated items, aligned the values and comments into clean columns and reworked some of the comments in the process.
2014-11-07curl_tool: Added krb5 to the supported featuresSteve Holme
2014-11-07configure: Added krb5 to the supported featuresSteve Holme
2014-11-07version info: Added Kerberos V5 to the supported featuresSteve Holme
2014-11-07mk-ca-bundle.vbs: switch to new certdata.txt url.Guenter Knauf
2014-11-07RELEASE-NOTES: Synced with dcad09e125Steve Holme
2014-11-07http_digest: Fixed some memory leaks introduced in commit 6f8d8131b1Steve Holme
Fixed a couple of memory leaks as a result of moving code that used to populate allocuserpwd and relied on it's clean up.
2014-11-06docs: Updated following the addition of SSPI based HTTP digest authSteve Holme
2014-11-06sasl_sspi: Tidy up of the existing digest codeSteve Holme
Following the addition of SSPI support for HTTP digest, synchronised elements of the email digest code with that of the new HTTP code.
2014-11-06http_digest: Post SSPI support tidy upSteve Holme
Post tidy up to ensure commonality of code style and variable names.
2014-11-06test552: Don't run HTTP digest tests for SSPI based buildsDan Fandrich
Technical difficulties prevented this from going into the previous commit.
2014-11-06tests: Don't run HTTP digest tests for SSPI based buildsSteve Holme
Added !SSPI to the features list of the HTTP digest tests, as SSPI based builds now use the Windows SSPI messaging API rather than the internal functions, and we can't control the random numbers that get used as part of the digest.
2014-11-06curl.1: show zone index use in a URLDaniel Stenberg
2014-11-06http_digest: Fixed auth retry loop when SSPI based authentication failsSteve Holme
2014-11-06http_digest: Reworked the SSPI based input token storageSteve Holme
Reworked the input token (challenge message) storage as what is passed to the buf and desc in the response generation are typically blobs of data rather than strings, so this is more in keeping with other areas of the SSPI code, such as the NTLM message functions.
2014-11-06sasl_sspi: Fixed compilation warning from commit 2d2a62e3d9Steve Holme
Added void reference to unused 'data' parameter back to fix compilation warning.
2014-11-06sspi: Align definition values to even columns as we use 2 char spacingSteve Holme
2014-11-06sspi: Fixed missing definition of ISC_REQ_USE_HTTP_STYLESteve Holme
Some versions of Microsoft's sspi.h don't define this.
2014-11-06sasl: Removed non-SSPI Digest functions and defines from SSPI based buildsSteve Holme
Introduced in commit 7e6d51a73c these functions and definitions are only required by the internal challenge-response functions now.
2014-11-06sasl_sspi: Added HTTP digest response generation codeSteve Holme
2014-11-06http_digest: Added SSPI based challenge decoding codeSteve Holme