aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-09-21MacOSX-Framework: updates for SnowleopardHendrik Visage
1) PPC64 appears to be an 10.5 only supported architecture, so I forced 10.5 for 64bit if there is a need for PPC64, else 64bit only does x86_64 2) proper "make clean" after every ./configure. fixes a bug where subsequent runs the 32bit do not get compiled 3) Added a version numbering curl-$VERSION} rather than the "stock standard" A
2010-09-21RELEASE-NOTES: synced with 5fcc4332d62feDaniel Stenberg
Removed the duplicate entry of Kamil in the credits.
2010-09-20configure: don't enable RTMP if the lib detect failsDaniel Stenberg
librtmp is often statically linked and using sub dependencies like OpenSSL, so we need to make sure we can actually link with it properly before enabling it. Otherwise we easily end up trying to link with a RTMP lib that fails.
2010-09-20TODO: added 8.4 non-gcrypt under GnuTLSDaniel Stenberg
We must not assume gcrypt just because of GnuTLS
2010-09-20configure: check for gcrypt if using GnuTLSDaniel Stenberg
1 - libcurl assumes that there are gcrypt functions available when GnuTLS is. 2 - GnuTLS can be built to use libnettle instead as crypto library, which breaks assumption (1) This change makes configure make sure that if GnuTLS is requested and detected, it also makes sure that gcrypt is present or it errors out. This is mostly a way to make the user more aware of this flaw, the correct fix would be to detect which crypto layer that is in use and adapt our code to use that instead of blindly assuming gcrypt. Reported by: Michal Gorny Bug: http://curl.haxx.se/bug/view.cgi?id=3071038
2010-09-18RELEASE-NOTES: sync from d2a7fd2fe65b to HEADDaniel Stenberg
2010-09-18FTP: fix bad check of Curl_timeleft() return codeDaniel Stenberg
When it returns 0 it means no timeout. Only a negative value means that we're out of time.
2010-09-18LDAP: moved variable declaration to avoid compiler warnDaniel Stenberg
If built without HTTP or proxy support it would cause a compiler warning due to the unused variable. I moved the declaration of it into the only scope it is used.
2010-09-18LDAP: Use FALSE instead of bool_false when setting bits.closeTor Arntsen
bool_false is the internal name used in the setup_once.h definition we fall back to for non-C99 non-stdbool systems, it's not the actual name to use in assignments (we use bool_false, bool_true there to avoid global namespace problems, see comment in setup_once.h). The correct C99 value to use is 'false', but let's use FALSE as used elsewhere when assigning to bits.close. FALSE is set equal to 'false' in setup_once.h when possible. This fixes a build problem on C99 targets.
2010-09-18LDAP: Add missing declaration for 'result'Tor Arntsen
2010-09-18LDAP: Support for tunnelling queries through HTTP proxyMauro Iorio
As of curl-7.21.1 tunnelling ldap queries through HTTP Proxies is not supported. Actually if --proxytunnel command-line option (or equivalent CURLOPT_HTTPPROXYTUNNEL) is used for ldap queries like ldap://ldap.my.server.com/... You are unable to successfully execute the query. In facts ldap_*_bind is executed directly against the ldap server and proxy is totally ignored. This is true for both openLDAP and Microsoft LDAP API. Step to reproduce the error: Just launch "curl --proxytunnel --proxy 192.168.1.1:8080 ldap://ldap.my.server.com/dc=... " This fix adds an invocation to Curl_proxyCONNECT against the provided proxy address and on successful "CONNECT" it tunnels ldap query to the final ldap server through the HTTP proxy. As far as I know Microsoft LDAP APIs don't permit tunnelling in any way so the patch provided is for OpenLDAP only. The patch has been developed against OpenLDAP 2.4.23 and has been tested with Microsoft ISA Server 2006 and works properly with basic, digest and NTLM authentication.
2010-09-17timeout: use the correct start value as offsetDaniel Stenberg
Rodric provide an awesome recipe that proved libcurl didn't timeout at the requested time - it instead often timed out at [connect time] + [timeout time] instead of the documented and intended [timeout time] only. This bug was due to the code using the wrong base offset when comparing against "now". I could also take the oppurtinity to simplify the code by properly using of the generic help function for this: Curl_timeleft. Reported by: Rodric Glaser Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
2010-09-17Curl_timeleft: avoid returning "no timeout" by mistakeDaniel Stenberg
As this function uses return code 0 to mean that there is no timeout, it needs to check that it doesn't return a time left value that is exactly zero. It could lead to libcurl doing an extra 1000 ms select() call and thus not timing out as accurately as it should. I fell over this bug when working on the bug 3061535 but this fix does not correct that problem alone, although this is a problem that needs to be fixed. Reported by: Rodric Glaser Bug: http://curl.haxx.se/bug/view.cgi?id=3061535
2010-09-16whitespace: unified sourceDaniel Stenberg
if ( => if( while ( => while( and some other changes in the similar spirit, trying to make the whole file use the same style
2010-09-16remote-header-name: don't output filename when NULLDaniel Stenberg
2010-09-15TheArtOfHttpScripting: use long optionsJames Bursa
2010-09-14getinmemory: make the example easier to followJames Bursa
1. Remove the comment warning that it's "not been verified to work". It works with no problems in my testing. 2. Remove 2 unnecessary includes. 3. Remove the myrealloc(). Initialize chunk.memory with malloc() instead of NULL. The comments for these two parts contradicted each other. 4. Handle out of memory from realloc() instead of continuing. 5. Print a brief status message at the end.
2010-09-14multi: don't do extra expire calls for the connectionDaniel Stenberg
The timeout is set for the connect phase already at the start of the request so we should not add a new one, and we MUST not set expire to 0 as that will remove any other potentially existing timeouts.
2010-09-12Fix a bashism: test a = b is more portable than ==.Peter Pentchev
2010-09-12glob_word: remove a check that is always falseDaniel Stenberg
2010-09-12inflate_stream: remove redundant check that is always trueDaniel Stenberg
2010-09-12digest: make it clear the condition is always trueDaniel Stenberg
2010-09-12ssluse: removed redundant check that is always trueDaniel Stenberg
2010-09-11Link curl and the test apps with -lrt explicitly when necessaryDan Fandrich
When curl calls a function from that library then it needs to explicitly link to the library instead of piggybacking on libcurl's own dependency. Without this, GNU ld with the --no-add-needed flag fails when linking (which Fedora now does by default). Reported by: Quanah Gibson-Mount Bug: http://curl.haxx.se/mail/lib-2010-09/0085.html
2010-09-09Mention the Debian Popularity ContestDan Fandrich
2010-09-09test565: Don't hardcode IP:PORTTor Arntsen
Use %HOSTIP:%HTTPPORT instead of 127.0.0.1:8990 so that verification works if the baseport change option is used when executing runtests.pl.
2010-09-09curl.1: updated protocols and polished languageDaniel Stenberg
2010-09-08FAQ: CURL_STATICLIB for visual studio usersDaniel Stenberg
Clarified as it isn't used with a -D option for them. Reported by: Artfunkel Bug: http://curl.haxx.se/bug/view.cgi?id=3060381
2010-09-07FAQ: updated and added host with custom IP questionDaniel Stenberg
Added "3.19 How do I get HTTP from a host using a specific IP address?" and updated some stuff about certs etc.
2010-09-07chunky parser: only rewind if neededDaniel Stenberg
The code reading chunked encoding attempts to rewind the code if it had read more data than the chunky parser consumes. The rewinding can fail and it will then cause an error. This change now makes the rewinding only happen if pipelining is in use - as that's the only time it really needs to be done. Bug: http://curl.haxx.se/mail/lib-2010-08/0297.html Reported by: Ron Parker
2010-09-06rtsp: avoid SIGSEGV on malformed headerKamil Dudka
2010-09-06rtsp: avoid SIGSEGV on malformed headerKamil Dudka
2010-09-06warning: fix conversion to 'int' from 'size_t'Daniel Stenberg
2010-09-06portabilty: use proper variable type to hold socketsDaniel Stenberg
Curl_getconnectinfo() is changed to return a proper curl_socket_t for the last socket so that it'll work more portably (and cause less compiler warnings).
2010-09-03Trial to fix another compiler warning with braces.Guenter Knauf
2010-09-02Use checkprefix() to compare protocol-specific stringsDan Fandrich
Otherwise, there could be problems running in certain locales.
2010-09-02Moved S_ISREG define to setup as suggested by Dan.Guenter Knauf
2010-09-02Use own typedef as workaround for broken sspi.h header (f.e. Watcom).Guenter Knauf
2010-09-02Added some hacks in order to build with VC from git.Guenter Knauf
Adam Light posted this patch to the list which enables builds from git with VC versions other than vc6; also he added a vc10 target.
2010-09-02Added S_ISREG define for Win32.Guenter Knauf
2010-09-01multi: fixes for timing out handlesDaniel Stenberg
Add a timeout check for handles in the state machine so that they will timeout in all states disregarding what actions that may or may not happen. Fixed a bug in socket_action introduced recently when looping over timed out handles: it wouldn't assign the 'data' variable and thus it wouldn't properly take care of handles. In the update_timer function, the code now checks if the timeout has been removed and then it tells the application. Previously it would always let the remaining timeout(s) just linger to expire later on.
2010-09-01threaded resolver: no more expire 0 callsDaniel Stenberg
Curl_expire() set to 0 expires ALL timeouts so it should only be called if we truly and really want to remove all timeouts for the handle.
2010-09-01resolve_server: simplify codeDaniel Stenberg
Make use of the helper function Curl_timeleft() instead of duplicating code.
2010-08-31multi: make sure the next timeout is used when one expiresDaniel Stenberg
Each easy handle has a list of timeouts, so as soon as the main timeout for a handle expires, we must make sure to get the next entry from the list and re-add the handle to the splay tree. This was attempted previously but was done poorly in my commit 232ad6549a68450.
2010-08-30Added proxy keyword to allow skipping test in proxyless configsDan Fandrich
2010-08-29multi: set timeouts when transfer beginsDaniel Stenberg
When a new transfer is about to start we now set the proper timeouts to expire for the multi interface if they are set for the handle. This is a follow-up bugfix to make sure that easy handles timeout properly when the times expire and the multi interface is used. This also improves curl_multi_timeout().
2010-08-28CURLOPT_DIRLISTONLY: don't use with CURLOPT_WILDCARDMATCHDaniel Stenberg
2010-08-28FAQ: update list of supported protocolsDaniel Stenberg
2010-08-28In the m4 detection line, factor out the 2>dev/nullFabian Keil
2010-08-28If m4 doesn't support --version, try if gm4 does.Fabian Keil
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-24 03:25:36 +0000