aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-03-16fix some compiler warningsYang Tse
2012-03-13resolve with c-ares: don't resolve IPv6 when not workingMaxim Prohorov
If the Curl_ipv6works() function says no, there is no reason to try AAAA names even if libcurl was built with IPv6 support enabled. Bug: http://curl.haxx.se/mail/lib-2012-03/0045.html
2012-03-10smtp.c: Changed the curl error code for EHLO and HELO responsesSteve Holme
Changed the returned curl error codes for EHLO and HELO responses from CURLE_LOGIN_DENIED to CURLE_REMOTE_ACCESS_DENIED as a negative response from these commands represents no service as opposed to a login error.
2012-03-10RELEASE-NOTES: synced with e650dbde86Daniel Stenberg
New: 12 bugs, 3 changes, 6 contributors and updated counters at the top
2012-03-10Curl_http: strip off [brackets] from ipv6-only host headersAndrei Cipu
Since the host name is passed in to the cookie engine it will not work correctly if the brackets are left in the name. Bug:http://curl.haxx.se/mail/lib-2012-03/0036.html
2012-03-10CURLSSH_OPT_AUTH: documented it has no effectArmel Asselin
2012-03-10mk-ca-bundle.pl: use LWP::UserAgent with proper https verify behavior.John Joseph Bachir
An alternative would be: 1. specify HTTPS_CA_DIR and/or HTTPS_CA_FILE 2. ensure that Net::SSL is being used, and IO::Socket::SSL is NOT being used This question and answer explain: http://stackoverflow.com/questions/74358/
2012-03-10access the CA source file using HTTPSJohn Joseph Bachir
2012-03-09includes: remove inclusion of unused file http_proxy.hDaniel Stenberg
2012-03-08CONNECT: made generically not per-protocolDaniel Stenberg
Curl_protocol_connect() now does the tunneling through the HTTP proxy if requested instead of letting each protocol specific connection function do it.
2012-03-08ssh_connect: tunnel through HTTP proxy if requestedDaniel Stenberg
2012-03-08LWIP: don't consider HAVE_ERRNO_H to be winsockDaniel Stenberg
The check for Winsock definition was a bit too broad Bug: http://curl.haxx.se/mail/lib-2012-03/0046.html
2012-03-08curl-config: only provide libraries with --libsDave Reisner
In line with the manpage, curl-config --libs should only provide the necessary library flags for the linker in order to compile software with libcurl. Also with this change, we match what the pkg-config file provides.
2012-03-05CONTRIB: Please don't send pull requestsDaniel Stenberg
2012-02-25libcurl docs: version correctionsDaniel Stenberg
Correct some inconsistencies in which version some things were added. Bug: http://curl.haxx.se/bug/view.cgi?id=3494091 Reported by: "curlybugs"
2012-02-24CONNECT: fix ipv6 address in the Request-LineDaniel Stenberg
Commit 466150bc64d fixed the Host: header with CONNECT, but I then forgot the preceeding request-line. Now this too uses [brackets] properly if a ipv6 numerical address was given. Bug: http://curl.haxx.se/bug/view.cgi?id=3493129 Reported by: "Blacat"
2012-02-23SMTP: Added support for returning SMTP response codesSteve Holme
Set the conn->data->info.httpcode variable in smtp_statemach_act() to allow Curl_getinfo() to return the SMTP response code via the CURLINFO_RESPONSE_CODE action.
2012-02-23curl.1: updated --libcurlDaniel Stenberg
With Colin Hogben's recent work, --libcurl now also works with -F and more. Remove the previous caveat.
2012-02-23test: --libcurl fixesDaniel Stenberg
The line endings broke when I saved the three recent patches (my fault, not Colin's) to 'git am' them. Adjusted the stripping of the test program for comparing to also exclude the SSH key file name as that will differ and use a local path name.
2012-02-23Add helper script convsrctest.pl to manipulate --libcurl tests.Colin Hogben
The intention is to take the output of curl's --libcurl option, as exercised in test 14xx, and generate a corresponding test15xx in which the generated code is compiled and run. This will verify that the generated code behaves equivalently to the original invocation of the curl command. The script is not yet integrated into the configure / makefile machinery.
2012-02-23Add tests for curl's --libcurl output.Colin Hogben
These tests check the output of the --libcurl option of curl, including the improved option handling added in a related patch.
2012-02-23Generate lists and use symbols in --libcurl code output.Colin Hogben
This patch improves the output of curl's --libcurl option by generating code which builds curl_httppost and curl_slist lists, and uses symbolic names for enum and flag values. Variants of the my_setopt macro in tool_setopt.h are added in order to pass extra type information to the code-generation step in tool_setopt.c. If curl is configured with --disable-libcurl-option then the macros call curl_easy_setopt directly.
2012-02-21smtp.c: Fixed an issue with writing postdataSteve Holme
Fixed a problem in smtp_done() when writing out the postdata as Curl_write() would periodically return zero bytes written.
2012-02-21CURLOPT_MAIL_AUTH: added in 7.25.0Daniel Stenberg
Brought in commit 0cf0ab6f300
2012-02-21pop3 test server: send terminating ".CRLF" onlyDaniel Stenberg
With commit 035ef06bda7 applied, the test pop3 server needs to send ".\r\n" as the body terminating sequence and there needs to be a final CRLF in the actual body in the test data file.
2012-02-19pop3.c: Fixed drop of final CRLF in EOB checkingSteve Holme
Curl_pop3_write() would drop the final CRLF of a message as it was considered part of the EOB as opposed to part of the message. Whilst the EOB sequence needs to be searched for by the function only the final 3 characters should be removed as per RFC-1939 section 3. Reported by: Rich Gray Bug: http://curl.haxx.se/mail/lib-2012-02/0051.html
2012-02-17smtp.c: Fixed an issue with the EOB checkingSteve Holme
Curl_smtp_escape_eob() would leave off final CRLFs from emails ending in multiple blank lines additionally leaving the smtpc->eob variable with the character count in, which would cause problems for additional emails when sent through multiple calls to curl_easy_perform() after a CURLOPT_CONNECT_ONLY.
2012-02-17CURLE_FTP_PRET_FAILED: listed twiceDaniel Stenberg
Make sure it is mentioned once and with the correct description
2012-02-16--mail-auth documentedDaniel Stenberg
2012-02-16SMTP: Code policing and tidy upSteve Holme
2012-02-16curl: Added support for --mail-authSteve Holme
Added an extra command-line argument to support the optional AUTH parameter in SMTPs MAIL FROM command.
2012-02-16docs: mention that NTLM works with NSS, tooKamil Dudka
2012-02-15DOCS: Added information for CURLOPT_MAIL_AUTH.Steve Holme
Added information relating to the new CURLOPT_MAIL_AUTH parameter and reworked CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT to be a clearer. Fixed inconsistencies of "vocalisation of the abbreviation" versus "vocalisation of the first word" for all abbreviations. Corrected a typo in CURLOPT_NOPROXY.
2012-02-15smtp.c: Fixed use of angled brackets in AUTH parameter.Steve Holme
Fixed the use of angled brackets "<>" in the optional AUTH parameter as per RFC-2554 section 5. The address should not include them but an empty address should be replaced by them.
2012-02-14smtp_mail: Added support to MAIL FROM for the optional AUTH parameterSteve Holme
Added a new CURLOPT_MAIL_AUTH option that allows the calling program to set the optional AUTH parameter in the MAIL FROM command. When this option is specified and an authentication mechanism is used to communicate with the mail server then the AUTH parameter will be included in the MAIL FROM command. This is particularly useful when the calling program is acting as a relay in a trusted environment and performing server to server communication, as it allows the relaying server to specify the address of the mailbox that was used to authenticate and send the original email.
2012-02-14cyassl: update to CyaSSL 2.0.x APItoddouska
Modify configure.ac to test for new CyaSSL Init function and remove default install path to system. Change to CyaSSL OpenSSL header and proper Init in code as well. Note that this no longer detects or works with CyaSSL before v2
2012-02-14LIBCURL_VERSION_NUM: 0x071900Daniel Stenberg
I accidentally left the lowest bits 01 before
2012-02-14SMTP: Fixed error when using CURLOPT_CONNECT_ONLYSteve Holme
Fixed incorrect behavior in smtp_done() which would cause the end of block data to be sent to the SMTP server if libcurl was operating in connect only mode. This would cause the server to return an error as data would not be expected which in turn caused libcurl to return CURLE_RECV_ERROR.
2012-02-13s/7.24.1/7.25.0Daniel Stenberg
We will go straight to 7.25.0 due to the new additions
2012-02-13curlver.h: bumped to 7.25.0Daniel Stenberg
and updated the end year in the generic copyright string
2012-02-13RELEASE-NOTES: synced with 2b26eb985Daniel Stenberg
9 bug fixes, 4 changes and numerous contributors Bumped release version and option counters
2012-02-13configure: add option disable --libcurl outputColin Hogben
2012-02-13curl tool: allow negative numbers as option valuesAlessandro Ghedini
Fix the str2num() function to not check if the input string starts with a digit, since strtol() supports numbers prepended with '-' (and '+') too. This makes the --max-redirs option work as documented.
2012-02-10parse_proxy: simply memory handlingDaniel Stenberg
... by making sure that the string is always freed after the invoke as parse_proxy will always copy the data and this way there's a single free() instead of multiple ones.
2012-02-10parse_proxy: bail out on zero-length proxy names!Daniel Stenberg
The proxy parser function strips off trailing slashes off the proxy name which could lead to a mistaken zero length proxy name which would be treated as no proxy at all by subsequent functions! This is now detected and an error is returned. Verified by the new test 1329. Reported by: Chandrakant Bagul Bug: http://curl.haxx.se/mail/lib-2012-02/0000.html
2012-02-09nss: add support for the CURLSSLOPT_ALLOW_BEAST optionKamil Dudka
... and fix some typos from the 62d15f1 commit.
2012-02-09configure: don't modify LD_LIBRARY_PATH for cross compilesRob Ward
2012-02-09--ssl-allow-beast addedDaniel Stenberg
This new option tells curl to not work around a security flaw in the SSL3 and TLS1.0 protocols. It uses the new libcurl option CURLOPT_SSL_OPTIONS with the CURLSSLOPT_ALLOW_BEAST bit set.
2012-02-09CURLOPT_SSL_OPTIONS: addedDaniel Stenberg
Allow an appliction to set libcurl specific SSL options. The first and only options supported right now is CURLSSLOPT_ALLOW_BEAST. It will make libcurl to disable any work-arounds the underlying SSL library may have to address a known security flaw in the SSL3 and TLS1.0 protocol versions. This is a reaction to us unconditionally removing that behavior after this security advisory: http://curl.haxx.se/docs/adv_20120124B.html ... it did however cause a lot of programs to fail because of old servers not liking this work-around. Now programs can opt to decrease the security in order to interoperate with old servers better.
2012-02-09curl: use new library-side TCP_KEEPALIVE optionsDave Reisner
Use the new library CURLOPT_TCP_KEEPALIVE rather than disabling this via the sockopt callback. If --keepalive-time is used, apply the value to CURLOPT_TCP_KEEPIDLE and CURLOPT_TCP_KEEPINTVL.
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-07 19:57:15 +0000