aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-04sasl: Added service parameter to Curl_sasl_create_digest_md5_message()Steve Holme
Added a service type parameter to Curl_sasl_create_digest_md5_message() to allow the function to be used by different services rather than being hard coded to "smtp".
2012-06-04tests 1356 to 1363: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1356 to 1362 succeed but a write failure is logged in traceNNNN. Currently 1363 fails, so disabled for now.
2012-06-04tests: Updated pop3 tests for change in auth mechanism detectionSteve Holme
2012-06-04pop3: Changed the sasl mechanism detection from auth to capaSteve Holme
Not all SASL enabled POP3 servers support the AUTH command on its own when trying to detect the supported mechanisms. As such changed the mechanism detection to use the CAPA command instead.
2012-06-04curl_easy_setopt.3: proto updates + cleanupsDaniel Stenberg
- For all *FUNCTION options, they now all show the complete prototype in the description. Previously some of them would just refer to a typedef'ed function pointer in the curl.h header. - I made the phrasing of that "Pass a pointer to a function that matches the following prototype" the same for all *FUNCTION option descriptions. - I removed some uses of 'should'. I think I sometimes over-use this word as in many places I actually mean MUST or otherwise more specific and not-so-optional synonyms.
2012-06-04tests 1348 to 1355: several -O -J -i -D combinations with FTP protocolYang Tse
Currently 1348 to 1354 succeed but a write failure is logged in traceNNNN. Currently 1355 fails, so disabled for now.
2012-06-04tests 1346 to 1347: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-06-04sasl: Small code tidy upSteve Holme
Reworked variable names in Curl_sasl_create_cram_md5_message() to match those in Curl_sasl_create_digest_md5_message() as they are more appropriate.
2012-06-04sasl: Moved digest-md5 authentication message creation from smtp.cSteve Holme
Moved the digest-md5 message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-06-04sasl: Small code tidy up before moving digest-md5 overSteve Holme
Correction of comments and variable names.
2012-06-03RELEASE-NOTES: Added missing addition of sasl login supportSteve Holme
2012-06-03pop3: Added support for sasl cram-md5 authenticationSteve Holme
2012-06-03Curl_sasl_create_plain_message: remove TABDaniel Stenberg
2012-06-03sasl: Small code tidy upSteve Holme
Added some comments and removed an unreferenced variable.
2012-06-03pop3.c: Added conditional compilation for NTLM function callsSteve Holme
Added USE_NTLM condition compilation around the NTLM functions called from pop3_statemach_act() introduced in commit 69f7156ad96877.
2012-06-03sasl: Moved cram-md5 authentication message creation from smtp.cSteve Holme
Moved the cram-md5 message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-06-03pop3: Fixed an issue with changes introduced in commit c267c53017bcSteve Holme
Because pop3_endofresp() is called for each line of data yet is not passed the line and line length, so we have to use the data pointed to by pp->linestart_resp which contains the whole packet, the mechanisms were being detected in one call yet the function would be called for each line of data. Using curl with verbose mode enabled would show that one line of data would be received in response to the AUTH command, before the AUTH <mechanism> command was sent to the server and then the next few lines of the original AUTH command would be displayed before the response from the AUTH <mechanism> command. This would then cause problems when parsing the CRAM-MD5 challenge data as extra data was contained in the buffer. Changed the parsing so that each line is checked for the mechanisms and the function returns FALSE until the whole of the AUTH response has been processed.
2012-06-03version: bump to 7.27.0 for next releaseDaniel Stenberg
Due to new features
2012-06-03RELEASE-NOTES: synced with c4e3578e4bfDaniel Stenberg
Also bumped the contributor number and next release is to become 7.27.0
2012-06-03THANKS: 16 new contributors from the 7.26.0 releaseDaniel Stenberg
2012-06-03DOCS: Fixed list in Section 18.2 not displaying correctly on web siteSteve Holme
2012-06-03DOCS: Corrected missed heading renumbering from commit 530675a1ad7Steve Holme
2012-06-03DOCS: Added IMAP and LDAP sectionsSteve Holme
Added new sections 11. IMAP and 12. LDAP to document adding SASL based authentication. Renumbered current sections 11 to 17 as 13 to 19. Additionally added 19.10 Add CURLOPT_MAIL_CLIENT option.
2012-06-03sasl.c: Fix to avoid warnings introduced in commit d9ca9e9869e8Steve Holme
Applied a fix to avoid warnings on systems where Curl_ntlm_sspi_cleanup() is just a nop.
2012-06-02pop3.c:Corrected typo in commit 69ba0da8272dSteve Holme
2012-06-02pop3: Fixed the issue of having to supply the user name for all requestsSteve Holme
Previously it wasn't possible to connect to POP3 and not specify the user name as a CURLE_ACCESS_DENIED error would be returned. This error occurred because USER would be sent to the server with a blank user name if no mailbox user was specified as the server would reply with -ERR. This wasn't a problem prior to the 7.26.0 release but with the introduction of custom commands the user and/or application developer might want to issue a CAPA command without having to log in as a specific mailbox user. Additionally this fix won't send the newly introduced AUTH command if no user name is specified.
2012-06-02pop3.c: Small code tidy upSteve Holme
Corrected lines exceeding 78 characters. Repositioned some comments and added extra clarity.
2012-06-02sasl: Corrected variable names in comments and parametersSteve Holme
2012-06-02pop3: Added support for sasl ntlm authenticationSteve Holme
2012-06-02sasl: Small comment style tidy up following ntlm commitSteve Holme
2012-06-02sasl: Moved ntlm authentication message handling from smtp.cSteve Holme
Moved the ntlm message creation and decoding from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-06-01pop3: Added support for sasl login authenticationSteve Holme
2012-06-01tests 1334 to 1345: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-06-01tests: support test definitions with up to 5 file checks in <verify> sectionYang Tse
This is done introducing tags <file1> to <file4> besides existing <file> one, as well as corresponding <stripfile1> to <stripfile4> ones, that can be used in the <verify> section in the same way as the non-numbered ones.
2012-05-31sasl: Moved login authentication message creation from smtp.cSteve Holme
Moved the login message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-05-31smtp.c: Reworked message encoding in smtp_state_authpasswd_resp()Steve Holme
Rather than encoding the password message itself the smtp_state_authpasswd_resp() function now delegates the work to the same function that smtp_state_authlogin_resp() and smtp_authenticate() use when constructing the encoded user name.
2012-05-31smtp.c: Re-factored smtp_auth_login_user() for use with passwordsSteve Holme
In preparation for moving to the SASL module re-factored the smtp_auth_login_user() function to smtp_auth_login() so that it can be used for both user names and passwords as sending both of these under the login authentication mechanism is the same.
2012-05-31pop3: Added support for sasl plain text authenticationSteve Holme
2012-05-30curl_ntlm_msgs.c: Corrected small spelling mistake in commentsSteve Holme
2012-05-30sasl: Moved plain text authentication message creation from smtp.cSteve Holme
Moved the plain text message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-05-30configure: fix LDAPS disabling related misplaced closing parenthesisYang Tse
2012-05-30pop3 test server: allow pop3 test server verification to succeed againYang Tse
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further pop3 test server expansion for tests that require CAPA or AUTH support, although this will need some extra work to make it fully functional.
2012-05-28pop3: Introduced the continue response in pop3_endofresp()Steve Holme
2012-05-28pop3: Changed response code from O and E to + and -Steve Holme
The POP3 protocol doesn't really have the concept of error codes and uses +, +OK and -ERR in response to commands to indicate continue, success and error. The AUTH command is one of those commands that requires multiple pieces of data to be sent to the server where the server will respond with + as part of the handshaking. This meant changing the values before continuing with the next stage of adding authentication support.
2012-05-28pop3: Small code tidy up following authentication work so farSteve Holme
Changed the order of the state machine to match the order of actual events. Reworked some comments and function parameter positioning that I missed the other day.
2012-05-28nss: use human-readable error messages provided by NSSKamil Dudka
Bug: http://lists.baseurl.org/pipermail/yum-devel/2012-January/009002.html
2012-05-27test1013.pl: filter out MetalinkDaniel Stenberg
Since it isn't a feature supported by curl-config we can't compare that with the --version output
2012-05-27pop3: remove variable-not-used warningsDaniel Stenberg
2012-05-27DOCS: Corrected the "Added in" version number for CURLOPT_MAIL_AUTHSteve Holme
Additionally corrected another RFC link that I missed yesterday.
2012-05-27pop3: Added support for SASL based authentication mechanism detectionSteve Holme
Added support for detecting the supported SASL authentication mechanisms via the AUTH command. There are two ways of detecting them, either by using the AUTH command, that will return -ERR if not supported or by using the CAPA command which will return SASL and the list of mechanisms if supported, not include SASL if SASL authentication is not supported or -ERR if the CAPA command is not supported. As such it seems simpler to use the AUTH command and fallback to normal clear text authentication if the the command is not supported. Additionally updated the test cases to return -ERR when the AUTH command is encountered. Additional test cases will be added when support for the individual authentication mechanisms is added.