aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-05-01bindlocal: move brace out of #ifdefLars Johannesen
The code within #ifdef HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID wrongly had two closing braces when it should only have one, so builds without that define would fail. Bug: http://curl.haxx.se/mail/lib-2013-05/0000.html
2013-04-30smtp: Tidy up to move the eob counter to the per-request structureSteve Holme
Move the eob counter from the smtp_conn structure to the SMTP structure as it is associated with a SMTP payload on a per-request basis.
2013-04-30TODO: Updated following the addition of CURLOPT_SASL_IRSteve Holme
2013-04-29smtp: Fixed unknown percentage complete in progress barSteve Holme
The curl command line utility would display the the completed progress bar with a percentage of zero as the progress routines didn't know the size of the transfer.
2013-04-29ftpserver: silence warningsDaniel Stenberg
Fix regressions in commit b56e3d43e5d. Make @data local and filter off non-numerical digits from $testno in STATUS_imap.
2013-04-29ftpserver.pl: Corrected the imap LOGIN responseSteve Holme
...to be more realistic and consistent with the other imap responses.
2013-04-29tests: Added imap STATUS command testSteve Holme
2013-04-28tests: Corrected the SMTP tests to be RFC2821 compliantSteve Holme
The emails that are sent to the server during these tests were incorrectly formatted as they contained one or more LF terminated lines rather than being CRLF terminated as per Section 2.3.7 of RFC-2821. This wasn't a problem for the test suite as the <stdin> data matched the <upload> data but anyone using these tests as reference would be sending incorrect data to a server.
2013-04-28email: Tidy up of *_perform_authenticate()Steve Holme
Removed the hard returns from imap and pop3 by using the same style for sending the authentication string as smtp. Moved the "Other mechanisms not supported" check in smtp to match that of imap and pop3 to provide consistency between the three email protocols.
2013-04-28smtp: Updated limit check to be more readable like the check in pop3Steve Holme
2013-04-28pop3: Added 255 octet limit check when sending initial responseSteve Holme
Added 255 octet limit check as per Section 4. Paragraph 8 of RFC-5034.
2013-04-28DOCS: Corrected line length of recent Secure Transport changesSteve Holme
2013-04-27darwinssl: add TLS crypto authenticationNick Zitzmann
Users using the Secure Transport (darwinssl) back-end can now use a certificate and private key to authenticate with a site using TLS. Because Apple's security system is based around the keychain and does not have any non-public function to create a SecIdentityRef data structure from data loaded outside of the Keychain, the certificate and private key have to be loaded into the Keychain first (using the certtool command line tool or the Security framework's C API) before we can find it and use it.
2013-04-27Corrected version numbers after bumpSteve Holme
2013-04-27bump versionDaniel Stenberg
Since we're adding new stuff, the next release will bump the minor version and we're looking forward to 7.31.0
2013-04-27RELEASE-NOTES: synced with f4e6e201b146Steve Holme
2013-04-27DOCS: Updated following the addition of CURLOPT_SASL_IRSteve Holme
Documented the the option in curl_easy_setopt() and added it to symbols-in-versions.
2013-04-27tests: Corrected command line arguments in test907 and test908Steve Holme
2013-04-27tests: Added SMTP AUTH with initial response testsSteve Holme
2013-04-27tests: Updated SMTP tests to decouple client initial responseSteve Holme
Updated test903 and test904 following the addition of CURLOPT_SASL_IR as the default behaviour of SMTP AUTH responses is now to not include the initial response. New tests with --sasl-ir support to follow.
2013-04-27imap: Added support for overriding the SASL initial responseSteve Holme
In addition to checking for the SASL-IR capability the user can override the sending of the client's initial response in the AUTHENTICATION command with the use of CURLOPT_SASL_IR should the server erroneously not report SASL-IR when it does support it.
2013-04-27smtp: Added support for disabling the SASL initial responseSteve Holme
Updated the default behaviour of sending the client's initial response in the AUTH command to not send it and added support for CURLOPT_SASL_IR to allow the user to specify including the response. Related Bug: http://curl.haxx.se/mail/lib-2012-03/0114.html Reported-by: Gokhan Sengun
2013-04-27pop3: Added support for enabling the SASL initial responseSteve Holme
Allowed the user to specify whether to send the client's intial response in the AUTH command via CURLOPT_SASL_IR.
2013-04-27sasl-ir: Added --sasl-ir option to curl command line toolSteve Holme
2013-04-27sasl-ir: Added CURLOPT_SASL_IR to enable/disable the SASL initial responseSteve Holme
2013-04-26curl_easy_init: use less mallocsDaniel Stenberg
By introducing an internal alternative to curl_multi_init() that accepts parameters to set the hash sizes, easy handles will now use tiny socket and connection hash tables since it will only ever add a single easy handle to that multi handle. This decreased the number mallocs in test 40 (which is a rather simple and typical easy interface use case) from 1142 to 138. The maximum amount of memory allocated used went down from 118969 to 78805.
2013-04-26ftpserver.pl: Fixed imap logout confirmation dataSteve Holme
An IMAP server should response with the BYE continuation response before confirming the LOGOUT command was successful.
2013-04-26ftp_state_pasv_resp: connect through proxy also when set by envDaniel Stenberg
When connecting back to an FTP server after having sent PASV/EPSV, libcurl sometimes didn't use the proxy properly even though the proxy was used for the initial connect. The function wrongly checked for the CURLOPT_PROXY variable to be set, which made it act wrongly if the proxy information was set with an environment variable. Added test case 711 to verify (based on 707 which uses --socks5). Also added test712 to verify another variation of setting the proxy: with --proxy socks5:// Bug: http://curl.haxx.se/bug/view.cgi?id=1218 Reported-by: Zekun Ni
2013-04-26url: initialize speed-check data for file:// protocolZdenek Pavlas
... in order to prevent an artificial timeout event based on stale speed-check data from a previous network transfer. This commit fixes a regression caused by 9dd85bced56f6951107f69e581c872c1e7e3e58e. Bug: https://bugzilla.redhat.com/906031
2013-04-25test709: clarify the test in the nameDaniel Stenberg
2013-04-25sshserver: disable StrictHostKeyCheckingDaniel Stenberg
I couldn't figure out why the host key logic isn't working, but having it set to yes prevents my SSH-based test cases to run. I also don't see a strong need to use strict host key checking on this test server. So I disabled it.
2013-04-25runtests: log more commands in verbose modeDaniel Stenberg
... to aid tracking down failures
2013-04-25TODO: Corrected copy/paste typoSteve Holme
2013-04-25TODO: Added new ideas for future SMTP, POP3 and IMAP featuresSteve Holme
2013-04-25TODO: Updated following the addition of ;auth=<MECH> supportSteve Holme
2013-04-25DOCS: Minor rewording / clarification of host name protocol detectionSteve Holme
2013-04-24RELEASE-NOTES: synced with a8c92cb60890Steve Holme
2013-04-24DOCS: Added reference to IETF draft for SMTP URL InterfaceSteve Holme
...when mentioning login options. Additional minor clarification of "Windows builds" to be "Windows builds with SSPI"as a way of enabling NTLM as Windows builds may be built with OpenSSL to enable NTLM or without NTLM support altogether.
2013-04-23HISTORY: Fix spelling error.Linus Nielsen Feltzing
2013-04-23DOCS: Reworked the scheme calculation explanation under CURLOPT_URLSteve Holme
2013-04-23url: Added smtp and pop3 hostnames to the protocol detection listSteve Holme
2013-04-23HISTORY: correct some years/datesDaniel Stenberg
Thanks to archive.org's wayback machine I updated this document with some facts from the early httpget/urlget web page: http://web.archive.org/web/19980216125115/http://www.inf.ufrgs.br/~sagula/urlget.html
2013-04-22tests: add test1511 to check timecond clean-upAlessandro Ghedini
Verifies the timecond fix in commit c49ed0b6c0f
2013-04-22getinfo.c: reset timecond when clearing session-info variablesAlessandro Ghedini
Bug: http://bugs.debian.org/cgi-bin/bugreport.cgi?bug=705783 Reported-by: Ludovico Cavedon <cavedon@debian.org>
2013-04-22DOCS: Added information about login options to CURLOPT_USERPWDSteve Holme
2013-04-22DOCS: Added information about login options in the URLSteve Holme
2013-04-21url: Fixed missing length check in parse_proxy()Steve Holme
Commit 11332577b3cb removed the length check that was performed by the old scanf() code.
2013-04-21url: Fixed crash when no username or password supplied for proxySteve Holme
Fixed an issue in parse_proxy(), introduced in commit 11332577b3cb, where an empty username or password (For example: http://:@example.com) would cause a crash.
2013-04-21url: Removed unused text length constantsSteve Holme
2013-04-21url: Updated proxy URL parsing to use parse_login_details()Steve Holme