aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-25tests: update fixed IP for hostip/clientip splitStephan Szabo
These tests give differences for me on linux when using a hostip pointing to the external ip address for the local machine. Closes #4070
2019-06-24http: clarify header buffer size calculationDaniel Gustafsson
The header buffer size calculation can from static analysis seem to overlow as it performs an addition between two size_t variables and stores the result in a size_t variable. Overflow is however guarded against elsewhere since the input to the addition is regulated by the maximum read buffer size. Clarify this with a comment since the question was asked. Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-06-24KNOWN_BUGS: Don't clear digest for single realmDaniel Stenberg
Closes #3267
2019-06-24KNOWN_BUGS: Schannel disable CURLOPT_SSL_VERIFYPEER and verify hostnameDaniel Stenberg
Closes #3284
2019-06-24http2: call done_sending on end of uploadDaniel Stenberg
To make sure a HTTP/2 stream registers the end of stream. Bug #4043 made me find this problem but this fix doesn't correct the reported issue. Closes #4068
2019-06-24c-ares: honor port numbers in CURLOPT_DNS_SERVERSJames Brown
By using ares_set_servers_ports_csv on new enough c-ares. Fixes #4066 Closes #4067
2019-06-24CURLMOPT_SOCKETFUNCTION.3: fix typoDaniel Gustafsson
2019-06-24curl: skip CURLOPT_PROXY_CAPATH for disabled-proxy buildsKoen Dergent
Closes #4061
2019-06-24test153: fix content-length to avoid occasional hangDaniel Stenberg
Closes #4065
2019-06-24RELEASE-NOTES: syncedDaniel Stenberg
2019-06-23multi: enable multiplexing by default (again)Daniel Stenberg
It was originally made default in d7c4213bd0c (7.62.0) but mistakenly reverted in commit 2f44e94efb3d (7.65.0). Now enabled again. Closes #4051
2019-06-22typecheck: add 3 missing strings and a callback data pointerDaniel Stenberg
Closes #4050
2019-06-21tests: add disable-scan.pl to distDaniel Stenberg
follow-up from 29177f422a5 Closes #4059
2019-06-21http2: don't call stream-close on already closed streamsDaniel Stenberg
Closes #4055
2019-06-20travis: enable alt-svc for coverage buildMarcel Raad
Closes
2019-06-20travis: enable libssh2 for coverage buildMarcel Raad
It was enabled by default before commit c92d2e14cfb. Disable torture tests 600 and 601 because of https://github.com/curl/curl/issues/1678. Closes
2019-06-20travis: disable threaded resolver for coverage buildMarcel Raad
This enables more tests. Closes
2019-06-20travis: enable brotli for all xenial jobsMarcel Raad
There's no need for a separate job, and no need to build it from source with Xenial. Closes
2019-06-20travis: enable warnings-as-errors for coverage buildMarcel Raad
Closes
2019-06-20system_win32: fix typoGisle Vanem
2019-06-20typecheck: CURLOPT_CONNECT_TO takes an slist tooDaniel Stenberg
Additionally, add an alias in curl.h for slist-using options so that we can grep/parse those out at will. Closes #4042
2019-06-20tests: support non-localhost HOSTIP for dict/smb serversStephan Szabo
smbserver.py/dictserver.py were explicitly using localhost/127.0.0.1 for binding the server which when we were running the tests with a separate HOSTIP and CLIENTIP had failures verifying the server from the device we were testing. This changes them to take the address from runtests.py and default to localhost/127.0.0.1 if none is given. Closes #4048
2019-06-18test1523: basic test of CURLOPT_LOW_SPEED_LIMITDaniel Stenberg
2019-06-18configure: --disable-progress-meterDaniel Stenberg
Builds libcurl without support for the built-in progress meter. Closes #4023
2019-06-18curl: improved skip-setopt-options when built with disabled featuresDaniel Stenberg
Reduces #ifdefs in src/tool_operate.c Follow-up from 4e86f2fc4e6 Closes #3936
2019-06-18netrc: Return the correct error code when out of memorySteve Holme
Introduced in 763c5178. Closes #4036
2019-06-18config-os400: add getpeername and getsockname definesDaniel Stenberg
Reported-by: jonrumsey on github Fixes #4037 Closes #4039
2019-06-18runtests: keep logfiles around by defaultDaniel Stenberg
Make '-k' a no-op. The singletest function now clears the log directory BEFORE each individual test and not after, which makes it possible to always keep the logfiles around after a test has been run. No need to specify -k anymore. Keeping the option parsing around to work with users of old habits. Some tests also didn't work properly when -k was used (since the old logs would be kep when a new test starts) which this change also fixes. Closes #4035
2019-06-18openssl: fix pubkey/signature algorithm detection in certinfoGergely Nagy
Certinfo gives the same result for all OpenSSL versions. Also made printing RSA pubkeys consistent with older versions. Reported-by: Michael Wallner Fixes #3706 Closes #4030
2019-06-17conn_maxage: move the check to prune_dead_connections()Daniel Stenberg
... and avoid the locking issue. Reported-by: Kunal Ekawde Fixes #4029 Closes #4032
2019-06-17tests: have runtests figure out disabled featuresDaniel Stenberg
... so that runtests can skip individual test cases that test features that are explicitly disabled in this build. This new logic is intended for disabled features that aren't otherwise easily visible through the curl_version_info() or other API calls. tests/server/disabled is a newly built executable that will output a list of disabled features. Outputs nothing for a default build. Closes #3950
2019-06-17test188/189: fix Content-LengthDaniel Stenberg
This cures the flaky test results Closes #4034
2019-06-17winbuild: use WITH_PREFIX if givenThomas Gamper
Closes #4031
2019-06-17openssl: remove outdated commentDaniel Gustafsson
OpenSSL used to call exit(1) on syntax errors in OPENSSL_config(), which is why we switched to CONF_modules_load_file() and introduced a comment stating why. This behavior was however changed in OpenSSL commit abdd677125f3a9e3082f8c5692203590fdb9b860, so remove the now outdated and incorrect comment. The mentioned commit also declares OPENSSL_config() deprecated so keep the current coding. Closes #4033 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-06-16RELEASE-NOTES: syncedDaniel Stenberg
2019-06-16os400: make vsetopt() non-static as Curl_vsetopt() for os400 support.Patrick Monnerat
Use it in curl_easy_setopt_ccsid(). Reported-by: jonrumsey on github Fixes #3833 Closes #4028
2019-06-15runtests: report single test time + total durationDaniel Stenberg
... after each successful test. Closes #4027
2019-06-14multi: fix the transfer hash functionDaniel Stenberg
Follow-up from 8b987cc7eb Reported-by: Tom van der Woerdt Fixes #4018 Closes #4024
2019-06-13unit1654: cleanup on memory failureDaniel Stenberg
... to make it handle torture tests properly. Reported-by: Marcel Raad Fixes #4021 Closes #4022
2019-06-13krb5: fix compiler warningMarcel Raad
Even though the variable was used in a DEBUGASSERT, GCC 8 warned in debug mode: krb5.c:324:17: error: unused variable 'maj' [-Werror=unused-variable] Just suppress the warning and declare the variable unconditionally instead of only for DEBUGBUILD (which also missed the check for HAVE_ASSERT_H). Closes https://github.com/curl/curl/pull/4020
2019-06-13quote.d: asterisk prefix works for SFTP as wellDaniel Stenberg
Reported-by: Ben Voris Fixes #4017 Closes #4019
2019-06-12multi: fix the transfer hashes in the socket hash entriesDaniel Stenberg
- The transfer hashes weren't using the correct keys so removing entries failed. - Simplified the iteration logic over transfers sharing the same socket and they now simply are set to expire and thus get handled in the "regular" timer loop instead. Reported-by: Tom van der Woerdt Fixes #4012 Closes #4014
2019-06-12url: Fix CURLOPT_MAXAGE_CONN time comparisonCliff Crosland
Old connections are meant to expire from the connection cache after CURLOPT_MAXAGE_CONN seconds. However, they actually expire after 1000x that value. This occurs because a time value measured in milliseconds is accidentally divided by 1M instead of by 1,000. Closes https://github.com/curl/curl/pull/4013
2019-06-11test1165: verify that CURL_DISABLE_ symbols are in syncDaniel Stenberg
between configure.ac and source code. They should be possible to switch on/off in configure AND be used in source code.
2019-06-11configure: remove CURL_DISABLE_TLS_SRPDaniel Stenberg
It isn't used by code so stop providing the define. Closes #4010
2019-06-11Revert "cmake: add SMB to list of disabled protocols if HTTP_ONLY is specified"Daniel Stenberg
This reverts commit 36738caeb78603ce24e3ea089a167b8c216fb938. Apparently several of the appveyor windows builds broke.
2019-06-11cmake: add SMB to list of disabled protocols if HTTP_ONLY is specifiedsergey-raevskiy
Reviewed-by: Jakub Zakrzewski Closes #3770
2019-06-11RELEASE-NOTES: syncedDaniel Stenberg
2019-06-11http2: remove CURL_DISABLE_TYPECHECK defineDaniel Stenberg
... in http2-less builds as it served no use.
2019-06-11configure: more --disable switches to toggle off individual featuresDaniel Stenberg
... actual support in the code for disabling these has already landed. Closes #4009