aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-12-04azure: add more buildsDaniel Stenberg
... removed two from travis (that now runs on azure instead) Closes #4671
2019-12-04CURLOPT_VERBOSE.3: see also ERRORBUFFERDaniel Stenberg
2019-12-03hostip4.c: bump copyright year rangeDaniel Stenberg
2019-12-03configure: enable IPv6 support without `getaddrinfo`Marcel Raad
This makes it possible to recognize and connect to literal IPv6 addresses when `getaddrinfo` is not available, which is already the case for the CMake build. This affects e.g. classic MinGW because it still targets Windows 2000 by default, where `getaddrinfo` is not available, but general IPv6 support is. Instead of checking for `getaddrinfo`, check for `sockaddr_in6` as the CMake build does. Closes https://github.com/curl/curl/pull/4662
2019-12-03curl_setup: disable IPv6 resolver without `getaddrinfo`Marcel Raad
Also, use `CURLRES_IPV6` only for actual DNS resolution, not for IPv6 address support. This makes it possible to connect to IPv6 literals by setting `ENABLE_IPV6` even without `getaddrinfo` support. It also fixes the CMake build when using the synchronous resolver without `getaddrinfo` support. Closes https://github.com/curl/curl/pull/4662
2019-12-03github action/azure pipeline: run 'make test-nonflaky' for testsDaniel Stenberg
To match travis and give more info on failures.
2019-12-03openssl: CURLSSLOPT_NO_PARTIALCHAIN can disable partial cert chainsDaniel Stenberg
Closes #4655
2019-12-03openssl: set X509_V_FLAG_PARTIAL_CHAINDaniel Stenberg
Have intermediate certificates in the trust store be treated as trust-anchors, in the same way as self-signed root CA certificates are. This allows users to verify servers using the intermediate cert only, instead of needing the whole chain. Other TLS backends already accept partial chains. Reported-by: Jeffrey Walton Bug: https://curl.haxx.se/mail/lib-2019-11/0094.html
2019-12-03curl: show better error message when no homedir is foundDaniel Stenberg
Reported-by: Vlastimil Ovčáčík Fixes #4644 Closes #4665
2019-12-03OPENSOCKETFUNCTION.3: correct the purpose descriptionDaniel Stenberg
Reported-by: Jeff Mears Bug: https://curl.haxx.se/mail/lib-2019-12/0007.html Closes #4667
2019-12-03travis: do not use OVERRIDE_CC or OVERRIDE_CXX if emptyPeter Wu
Fixes the macOS builds where OVERRIDE_CC and OVERRIDE_CXX are not set. Reported-by: Jay Satiro Fixes #4659 Closes #4661 Closes #4664
2019-12-02azure-pipelines: fix the test scriptDaniel Stenberg
2019-12-02Azure Pipelines: initial CI setupDaniel Stenberg
[skip ci]
2019-12-02docs: add "added: 7.68.0" to the --etag-* docsDaniel Stenberg
2019-12-02copyright: fix the year ranges for two filesDaniel Stenberg
Follow-up to 9c1806ae
2019-12-01build: Disable Visual Studio warning "conditional expression is constant"Jay Satiro
- Disable warning C4127 "conditional expression is constant" globally in curl_setup.h for when building with Microsoft's compiler. This mainly affects building with the Visual Studio project files found in the projects dir. Prior to this change the cmake and winbuild build systems already disabled 4127 globally for when building with Microsoft's compiler. Also, 4127 was already disabled for all build systems in the limited circumstance of the WHILE_FALSE macro which disabled the warning specifically for while(0). This commit removes the WHILE_FALSE macro and all other cruft in favor of disabling globally in curl_setup. Background: We have various macros that cause 0 or 1 to be evaluated, which would cause warning C4127 in Visual Studio. For example this causes it: #define Curl_resolver_asynch() 1 Full behavior is not clearly defined and inconsistent across versions. However it is documented that since VS 2015 Update 3 Microsoft has addressed this somewhat but not entirely, not warning on while(true) for example. Prior to this change some C4127 warnings occurred when I built with Visual Studio using the generated projects in the projects dir. Closes https://github.com/curl/curl/pull/4658
2019-12-01openssl: retrieve reported LibreSSL version at runtimeJay Satiro
- Retrieve LibreSSL runtime version when supported (>= 2.7.1). For earlier versions we continue to use the compile-time version. Ref: https://man.openbsd.org/OPENSSL_VERSION_NUMBER.3 Closes https://github.com/curl/curl/pull/2425
2019-12-01strerror: Add Curl_winapi_strerror for Win API specific errorsJay Satiro
- In all code call Curl_winapi_strerror instead of Curl_strerror when the error code is known to be from Windows GetLastError. Curl_strerror prefers CRT error codes (errno) over Windows API error codes (GetLastError) when the two overlap. When we know the error code is from GetLastError it is more accurate to prefer the Windows API error messages. Reported-by: Richard Alcock Fixes https://github.com/curl/curl/issues/4550 Closes https://github.com/curl/curl/pull/4581
2019-12-02global_init: undo the "intialized" bump in case of failureDaniel Stenberg
... so that failures in the global init function don't count as a working init and it can then be called again. Reported-by: Paul Groke Fixes #4636 Closes #4653
2019-11-29parsedate: offer a getdate_capped() alternativeDaniel Stenberg
... and use internally. This function will return TIME_T_MAX instead of failure if the parsed data is found to be larger than what can be represented. TIME_T_MAX being the largest value curl can represent. Reviewed-by: Daniel Gustafsson Reported-by: JanB on github Fixes #4152 Closes #4651
2019-11-28docs: add more references to curl_multi_pollDaniel Stenberg
Fixes #4643 Closes #4652
2019-11-28sha256: bump the copyright year rangeDaniel Stenberg
Follow-up from 66e21520f
2019-11-28curl_setup_once: consistently use WHILE_FALSE in macrosDaniel Gustafsson
The WHILE_FALSE construction is used to avoid compiler warnings in macro constructions. This fixes a few instances where it was not used in order to keep the code consistent. Closes #4649 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-11-28http_ntlm: Remove duplicate NSS initialisationSteve Holme
Given that this is performed by the NTLM code there is no need to perform the initialisation in the HTTP layer. This also keeps the initialisation the same as the SASL based protocols and also fixes a possible compilation issue if both NSS and SSPI were to be used as multiple SSL backends. Reviewed-by: Kamil Dudka Closes #3935
2019-11-28checksrc: fix regexp for ASSIGNWITHINCONDITIONDaniel Gustafsson
The regexp looking for assignments within conditions was too greedy and matched a too long string in the case of multiple conditionals on the same line. This is basically only a problem in single line macros, and the code which exemplified this was essentially: do { if((x) != NULL) { x = NULL; } } while(0) ..where the final parenthesis of while(0) matched the regexp, and the legal assignment in the block triggered the warning. Fix by making the regexp less greedy by matching for the tell-tale signs of the if statement ending. Also remove the one occurrence where the warning was disabled due to a construction like the above, where the warning didn't apply when fixed. Closes #4647 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-11-28RELEASE-NOTES: syncedDaniel Stenberg
2019-11-28curl: two new command line options for etagsMaros Priputen
--etag-compare and --etag-save Suggested-by: Paul Hoffman Fixes #4277 Closes #4543
2019-11-28docs: fix typosDaniel Gustafsson
2019-11-28mailmap: Niall O'Reilly's nameDaniel Stenberg
2019-11-28doh: use dedicated probe slotsNiall
... to easier allow additional DNS transactions. Closes #4629
2019-11-28travis: build ngtcp2 with --enable-lib-onlyDaniel Stenberg
... makes it skip the examples and other stuff we don't neeed. Closes #4646
2019-11-28ngtcp2: fix thread-safety bug in error-handlingDavid Benjamin
ERR_error_string(NULL) should never be called. It places the error in a global buffer, which is not thread-safe. Use ERR_error_string_n with a local buffer instead. Closes #4645
2019-11-27travis: export the CC/CXX variables when setDaniel Stenberg
Suggested-by: Peter Wu Fixes #4637 Closes #4640
2019-11-26dist: add error-codes.plMarcel Raad
Follow-up to commit 74f441c6d31. This should fix test 1175 when run via the daily source tarballs. Closes https://github.com/curl/curl/pull/4638
2019-11-26curl: fix --upload-file . hangs if delay in STDINJohn Schroeder
Attempt to unpause a busy read in the CURLOPT_XFERINFOFUNCTION. When uploading from stdin in non-blocking mode, a delay in reading the stream (EAGAIN) causes curl to pause sending data (CURL_READFUNC_PAUSE). Prior to this change, a busy read was detected and unpaused only in the CURLOPT_WRITEFUNCTION handler. This change performs the same busy read handling in a CURLOPT_XFERINFOFUNCTION handler. Fixes #2051 Closes #4599 Reported-by: bdry on github
2019-11-26XFERINFOFUNCTION: support CURL_PROGRESSFUNC_CONTINUEJohn Schroeder
(also for PROGRESSFUNCTION) By returning this value from the callback, the internal progress function call is still called afterward. Closes #4599
2019-11-26TLS: add BearSSL vtls implementationMichael Forney
Closes #4597
2019-11-26curl_multi_wakeup.3: add example and AVAILABILITYDaniel Stenberg
Reviewed-by: Gergely Nagy Closes #4635
2019-11-25multi: add curl_multi_wakeup()Gergely Nagy
This commit adds curl_multi_wakeup() which was previously in the TODO list under the curl_multi_unblock name. On some platforms and with some configurations this feature might not be available or can fail, in these cases a new error code (CURLM_WAKEUP_FAILURE) is returned from curl_multi_wakeup(). Fixes #4418 Closes #4608
2019-11-24schannel: fix --tls-max for when min is --tlsv1 or defaultXiaoyin Liu
Prior to this change schannel ignored --tls-max (CURL_SSLVERSION_MAX_ macros) when --tlsv1 (CURL_SSLVERSION_TLSv1) or default TLS (CURL_SSLVERSION_DEFAULT), using a max of TLS 1.2 always. Closes https://github.com/curl/curl/pull/4633
2019-11-24checksrc.bat: Add a check for vquic and vssh directoriesJay Satiro
Ref: https://github.com/curl/curl/pull/4607
2019-11-24projects: Fix Visual Studio projects SSH buildsJay Satiro
- Generate VQUIC and VSSH filenames in Visual Studio project files. Prior to this change generated Visual Studio project configurations that enabled SSH did not build properly. Broken since SSH files were moved to lib/vssh 3 months ago in 5b2d703. Fixes https://github.com/curl/curl/issues/4492 Fixes https://github.com/curl/curl/issues/4630 Closes https://github.com/curl/curl/pull/4607
2019-11-23RELEASE-NOTES: syncedDaniel Stenberg
2019-11-22openssl: Revert to less sensitivity for SYSCALL errorsJay Satiro
- Disable the extra sensitivity except in debug builds (--enable-debug). - Improve SYSCALL error message logic in ossl_send and ossl_recv so that "No error" / "Success" socket error text isn't shown on SYSCALL error. Prior to this change 0ab38f5 (precedes 7.67.0) increased the sensitivity of OpenSSL's SSL_ERROR_SYSCALL error so that abrupt server closures were also considered errors. For example, a server that does not send a known protocol termination point (eg HTTP content length or chunked encoding) _and_ does not send a TLS termination point (close_notify alert) would cause an error if it closed the connection. To be clear that behavior made it into release build 7.67.0 unintentionally. Several users have reported it as an issue. Ultimately the idea is a good one, since it can help prevent against a truncation attack. Other SSL backends may already behave similarly (such as Windows native OS SSL Schannel). However much more of our user base is using OpenSSL and there is a mass of legacy users in that space, so I think that behavior should be partially reverted and then rolled out slowly. This commit changes the behavior so that the increased sensitivity is disabled in all curl builds except curl debug builds (DEBUGBUILD). If after a period of time there are no major issues then it can be enabled in dev and release builds with the newest OpenSSL (1.1.1+), since users using the newest OpenSSL are the least likely to have legacy problems. Bug: https://github.com/curl/curl/issues/4409#issuecomment-555955794 Reported-by: Bjoern Franke Fixes https://github.com/curl/curl/issues/4624 Closes https://github.com/curl/curl/pull/4623
2019-11-22openssl: improve error message for SYSCALL during connectDaniel Stenberg
Reported-by: Paulo Roberto Tomasi Bug: https://curl.haxx.se/mail/archive-2019-11/0005.html Closes https://github.com/curl/curl/pull/4593
2019-11-22test1175: verify symbols-in-versions and libcurl-errors.3 in syncDaniel Stenberg
Closes #4628
2019-11-21include: make CURLE_HTTP3 use a new error codeDaniel Stenberg
To avoid potential issues with error code reuse. Reported-by: Christoph M. Becker Assisted-by: Dan Fandrich Fixes #4601 Closes #4627
2019-11-21bump: next release will be 7.68.0Daniel Stenberg
2019-11-21curl: add --parallel-immediateDaniel Stenberg
Starting with this change when doing parallel transfers, without this option set, curl will prefer to create new transfers multiplexed on an existing connection rather than creating a brand new one. --parallel-immediate can be set to tell curl to prefer to use new connections rather than to wait and try to multiplex. libcurl-wise, this means that curl will set CURLOPT_PIPEWAIT by default on parallel transfers. Suggested-by: Tom van der Woerdt Closes #4500
2019-11-20docs: fix typosVictor Magierski
Change 'experiemental' to 'experimental'. Closes #4618 Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-21 02:25:49 +0000