aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-30doc/curl.1: fix sentence with ending for -# optionDave Reisner
Try to be a little more descriptive about the effect of this flag, rather than parroting what was said in the paragraph just above.
2011-10-30FTP test server: fix server unresponsivenessYang Tse
Some torture tests left FTP test server in an unresponsive state, resulting in torture tests that actually completed following unexpected code paths. Changes in this commit solely address this issue and some adjustments for ftpserver.pl logging relative to data channel establishment and tear down. Pending NODATACONN relative adjustments reserved for a further commit.
2011-10-30runtests.pl: running server checks - commit 4464583a follow-upYang Tse
Ensure verification takes place with no server commands file. Ignore verbose setting for running server precheck. Tweak unresponsive server message, to allow detection by haxx.se scripts.
2011-10-29gtls.c: gnutls_transport_set_global_errno() deprecated in version 2.12.3Yang Tse
2011-10-28runtests.pl: running server checks - commit 3676ec96 follow-upYang Tse
Fix called sub when checking TFTP server, and adjust message.
2011-10-28runtests.pl: running server checks - commit 4464583a follow-upYang Tse
Extended server checks to others in addition to pingpong when torture testing.
2011-10-27lib589.c: add CURLOPT_READDATA missing stuffYang Tse
2011-10-27ftpserver.pl: three new custom FTP server commands to disable data channelYang Tse
NODATACONN421: applies only to active FTP mode, instructs server to not establish data connection back to client and reply with FTP 421. NODATACONN425: applies only to active FTP mode, instructs server to not establish data connection back to client and reply with FTP 425. NODATACONN: applies to both active and passive FTP modes, instructs server to not establish nor accept a data channel and fool client into believing that the data channel connection is possible. Some polishing probably required.
2011-10-27multi.c: OOM handling fixYang Tse
Fix curl_multi_cleanup() segfault when using weird cleanup sequence.
2011-10-27multi: start ftp state machine when switching to DO_MOREDaniel Stenberg
This extends the fix from commit d7934b8bd491 When the multi state is changed within the multi_runsingle from DOING to DO_MORE, we didn't immediately start the FTP state machine again. That then left the FTP state in FTP_STOP. When curl_multi_fdset() was subsequently called, the ftp_domore_getsock() function would return the wrong fd info. Reported by: Gokhan Sengun
2011-10-27libcurl-multi.3: update the list of areas still blockingDaniel Stenberg
2011-10-26test 589: active FTP upload using multi timeout and EPRT disabled serverYang Tse
2011-10-26multi tests: OOM handling fixes - commit 629d2e34 follow-upYang Tse
2011-10-26- Prepare the ILE/RPG binding and OS400 documentation for the upcoming releasePatrick Monnerat
2011-10-25RELEASE-NOTES: synced with 4464583a6edDaniel Stenberg
5 more bug fixes, 4 additional contributors
2011-10-25runtests.pl: running server checksYang Tse
When running torture tests, verify before each test case that required pingpong servers which are supposed to be alive are actually responsive. If found not responsive then restart them.
2011-10-24dist: add test 587Daniel Stenberg
I created test 587 in commit 840eff44f2b but forgot to add the file to the tarball. Added now.
2011-10-24test 588: verify active FTP with multi interface without EPRTDaniel Stenberg
This is using the verbatim 525 test code but it disables EPRT in the server and this should work just as well anyway.
2011-10-24FTP server: allow EPRT by defaultDaniel Stenberg
EPRT is now supported by default by the server. To disable it, use the generic REPLY instruction in the <servercmd> tag. Test 116 now has it disabled. All other existing active FTP port tests strip out the port commands from the logs already so the change of the server isn't that noticable.
2011-10-24ftp.c: some OOM handling fixesYang Tse
2011-10-24ftpserver.pl: ensure integral number usage for passive mode stringYang Tse
2011-10-24large headers: have curl accept >16K headersDaniel Stenberg
As commit 5850cc4808ab clarifies, libcurl can deliver header lines that are longer than CURL_MAX_WRITE_SIZE, only body data is limited to that size. The curl tool has check (when built debug-enabled) that made the wrong checks and this new test 1205 verifies that larger headers work.
2011-10-24curl_easy_setopt.3: headers can be CURL_MAX_HTTP_HEADER bytesDaniel Stenberg
Mention this maximum header size for the header callback cases
2011-10-24Merge pull request #25 from trtom/masterDaniel Stenberg
make sure the static build uses the static build option!
2011-10-24curl_easy_setopt.3: fix typoDaniel Stenberg
shoot, Dan Fandrich already had this pointed out...
2011-10-24curl_easy_setopt: Added pop3 to CURLOPT_URL.Steve Holme
Added pop3 username and password example as well as an explanation of how path part of the URL is used under pop3. Additionally have corrected a couple of typos.
2011-10-22tool_operate.c: OOM handling fixYang Tse
Move curl_easy_perform source code geneartion out of curl_easy_perform's loop for proper OOM handling and source code geneartion.
2011-10-21curl_multi_fdset: correct fdset with FTP PORT useDaniel Stenberg
After a PORT has been issued, and the multi handle would switch to the CURLM_STATE_DO_MORE state (which is unique for FTP), libcurl would return the wrong fdset to wait for when curl_multi_fdset() is called. The code would blindly assume that it was waiting for a connect of the second connection, while that isn't true immediately after the PORT command. Also, the function multi.c:domore_getsock() was highly FTP-centric and therefore ugly to keep in protocol-agnostic code. I solved this problem by introducing a new function pointer in the Curl_handler struct called domore_getsock() which is only called during the DOMORE state for protocols that set that pointer. The new ftp.c:ftp_domore_getsock() function now returns fdset info about the control connection's command/response handling while such a state is in use, and goes over to waiting for a writable second connection first once the commands are done. The original problem could be seen by running test 525 and checking the time stamps in the FTP server log. I can verify that this fix at least fixes this problem. Bug: http://curl.haxx.se/mail/lib-2011-10/0250.html Reported by: Gokhan Sengun
2011-10-21Added some missing test case XML tags and keywordsDan Fandrich
2011-10-21file.c: OOM handling fixYang Tse
file_disconnect() free's resources for multi API
2011-10-21multi.c: fix segfaultYang Tse
2011-10-21runtests.pl: fix printing of multivalued error codesYang Tse
2011-10-21multi tests: OOM handling fixesYang Tse
Additionally, improved error checking and logging.
2011-10-20Fixed compilation when HTTP or cookies are disabledDan Fandrich
2011-10-20KNOWN_BUGS: #74 fixedDaniel Stenberg
Multiple auths in the same WWW-Authenticate header Fixed in commit 7d81e3f7193b8c
2011-10-20Curl_http_input_auth: handle multiple auths in WWW-AuthenticateDaniel Stenberg
The fix is pretty much the one Nick Zitzmann provided, just edited to do the right indent levels and with test case 1204 added to verify the fix. Bug: http://curl.haxx.se/mail/lib-2011-10/0190.html Reported by: Nick Zitzmann
2011-10-20Curl_smtp_escape_eob: first byte is index 0...Daniel Stenberg
Fix a bug with with commit 2621dd42a4d that happened due to my last second pre-commit cleanup of the change without proper testing afterwards!
2011-10-20CURLM_CALL_MULTI_PERFORM: remove mentionDaniel Stenberg
This return code has not been used since 7.20.0 so we can stop mentioning it for current libcurl.
2011-10-19Silenced a compiler warning about an unused variableDan Fandrich
2011-10-20gtls: only call gnutls_transport_set_lowat with <gnutls-2.12.0Tim Harder
The default lowat level for gnutls-2.12* is set to zero to avoid unnecessary system calls and the gnutls_transport_set_lowat function has been totally removed in >=gnutls-3 which causes build failures. Therefore, the function shouldn't be used except for versions that require it, <gnutls-2.12.0.
2011-10-20Curl_smtp_escape_eob: fix EOB escapingDaniel Stenberg
As the EOB string can come byte by byte over a series of writes we must match byte-wise. Bug: http://curl.haxx.se/mail/lib-2011-10/0172.html
2011-10-18RELEASE-NOTES: synced with ecbb08cea3cd6Daniel Stenberg
2011-10-17singleipconnect: unstick the ipv6-connection booleanDaniel Stenberg
Previously the bit was set before the connection was found working so if it would first fail to an ipv6 address and then connect fine to a IPv4 address the variable would still be TRUE. Reported by: Thomas L. Shinnick Bug: http://curl.haxx.se/bug/view.cgi?id=3421912
2011-10-17nss: avoid a SIGSEGV with immature version of NSSKamil Dudka
Bug: https://bugzilla.redhat.com/733685
2011-10-17nss: big cleanup in nss_load_cert() and cert_stuff()Kamil Dudka
2011-10-17nss: refactor fmt_nickname() -> dup_nickname()Kamil Dudka
Do not use artificial nicknames for certificates from files.
2011-10-17nss: select client certificates by DERKamil Dudka
... instead of nicknames, which are not unique.
2011-10-17--epsv: fix typoDaniel Stenberg
Reported by: Thomas L. Shinnick
2011-10-16--show-error: position indepdenentDaniel Stenberg
Previously we required that -S/--show-error was used _after_ -s/--silent. This was slightly confusing since we strive to make arguments as position independent as possible. Now, you can use them in any order and the result should still be the same. Bug: http://curl.haxx.se/bug/view.cgi?id=3424286 Reported by: Andreas Olsson
2011-10-16curl_multi_fdset: clarify the max_fd == -1 caseDaniel Stenberg
Elaborate what max_fd == -1 means Remove the reference to CURLM_CALL_MULTI_PERFORM as modern libcurl versions don't ever return that.
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-23 17:23:22 +0000