aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2012-06-01tests 1334 to 1345: several -O -J -i -D combinations with HTTP protocolYang Tse
2012-06-01tests: support test definitions with up to 5 file checks in <verify> sectionYang Tse
This is done introducing tags <file1> to <file4> besides existing <file> one, as well as corresponding <stripfile1> to <stripfile4> ones, that can be used in the <verify> section in the same way as the non-numbered ones.
2012-05-31sasl: Moved login authentication message creation from smtp.cSteve Holme
Moved the login message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-05-31smtp.c: Reworked message encoding in smtp_state_authpasswd_resp()Steve Holme
Rather than encoding the password message itself the smtp_state_authpasswd_resp() function now delegates the work to the same function that smtp_state_authlogin_resp() and smtp_authenticate() use when constructing the encoded user name.
2012-05-31smtp.c: Re-factored smtp_auth_login_user() for use with passwordsSteve Holme
In preparation for moving to the SASL module re-factored the smtp_auth_login_user() function to smtp_auth_login() so that it can be used for both user names and passwords as sending both of these under the login authentication mechanism is the same.
2012-05-31pop3: Added support for sasl plain text authenticationSteve Holme
2012-05-30curl_ntlm_msgs.c: Corrected small spelling mistake in commentsSteve Holme
2012-05-30sasl: Moved plain text authentication message creation from smtp.cSteve Holme
Moved the plain text message creation from smtp.c into the sasl module to allow for use by other modules such as pop3.
2012-05-30configure: fix LDAPS disabling related misplaced closing parenthesisYang Tse
2012-05-30pop3 test server: allow pop3 test server verification to succeed againYang Tse
Introduce SUPPORTCAPA and SUPPORTAUTH config commands to allow further pop3 test server expansion for tests that require CAPA or AUTH support, although this will need some extra work to make it fully functional.
2012-05-28pop3: Introduced the continue response in pop3_endofresp()Steve Holme
2012-05-28pop3: Changed response code from O and E to + and -Steve Holme
The POP3 protocol doesn't really have the concept of error codes and uses +, +OK and -ERR in response to commands to indicate continue, success and error. The AUTH command is one of those commands that requires multiple pieces of data to be sent to the server where the server will respond with + as part of the handshaking. This meant changing the values before continuing with the next stage of adding authentication support.
2012-05-28pop3: Small code tidy up following authentication work so farSteve Holme
Changed the order of the state machine to match the order of actual events. Reworked some comments and function parameter positioning that I missed the other day.
2012-05-28nss: use human-readable error messages provided by NSSKamil Dudka
Bug: http://lists.baseurl.org/pipermail/yum-devel/2012-January/009002.html
2012-05-27test1013.pl: filter out MetalinkDaniel Stenberg
Since it isn't a feature supported by curl-config we can't compare that with the --version output
2012-05-27pop3: remove variable-not-used warningsDaniel Stenberg
2012-05-27DOCS: Corrected the "Added in" version number for CURLOPT_MAIL_AUTHSteve Holme
Additionally corrected another RFC link that I missed yesterday.
2012-05-27pop3: Added support for SASL based authentication mechanism detectionSteve Holme
Added support for detecting the supported SASL authentication mechanisms via the AUTH command. There are two ways of detecting them, either by using the AUTH command, that will return -ERR if not supported or by using the CAPA command which will return SASL and the list of mechanisms if supported, not include SASL if SASL authentication is not supported or -ERR if the CAPA command is not supported. As such it seems simpler to use the AUTH command and fallback to normal clear text authentication if the the command is not supported. Additionally updated the test cases to return -ERR when the AUTH command is encountered. Additional test cases will be added when support for the individual authentication mechanisms is added.
2012-05-27pop3: remove trailing whitespaceDaniel Stenberg
2012-05-27pop3: Code tidy up before the introduction of authentication codeSteve Holme
Moved EOB definition into header file. Switched the logic around in pop3_endofresp() to allow for the introduction of auth-mechanism detection. Repositioned second and third function variables where they will fit within the 78 character line limit. Tidied up some comments.
2012-05-27Enabled OpenSSL static linkage.Guenter Knauf
2012-05-27Enabled OpenSSL static linkage.Guenter Knauf
2012-05-27Try to detect OpenSSL build type automatically.Guenter Knauf
2012-05-26metalink: fix build errors when disabledDaniel Stenberg
2012-05-26Reduced #ifdef HAVE_METALINKTatsuhiro Tsujikawa
2012-05-26Disable hash check if neither OpenSSL nor GNUTLS is installed.Tatsuhiro Tsujikawa
2012-05-26Format GETOUT_METALINK nicelyTatsuhiro Tsujikawa
2012-05-26Minimize usage of structs from libmetalinkTatsuhiro Tsujikawa
2012-05-26Check checksum of downloaded file if checksum is availableTatsuhiro Tsujikawa
Metalink file contains several hash types of checksums, such as md5, sha-1, sha-256, etc. To deal with these checksums, I created abstraction layer based on lib/curl_md5.h and lib/md5.c. Basically, they are almost the same but I changed the code so that it is not hash type dependent. Currently, GNUTLS(nettle or gcrypt) and OpenSSL functions are supported. Checksum checking is done by reopening download file. If there is an I/O error, the current implementation just prints error message and does not try next resource. In this patch, the supported hash types are: md5, sha-1 and sha-256.
2012-05-26Always create directory hierarchy for Metalink.Tatsuhiro Tsujikawa
Filenames contained in Metalink file can include directory information. Filenames are unique in Metalink file, taking into account the directory information. So we need to create the directory hierarchy. Curl has --create-dirs option, but we create directory hierarchy for Metalink downloads regardless of the option value. This patch also put metalink int variable outside of HAVE_LIBMETALINK guard. This reduces the number of #ifdefs.
2012-05-26Fixed segmentation fault when Metalink has no valid file or no resource.Tatsuhiro Tsujikawa
2012-05-26Support media-type parameter in Content-TypeTatsuhiro Tsujikawa
2012-05-26Print "Metalink" in Features if Metalink support is enabled.Tatsuhiro Tsujikawa
2012-05-26Removed trailing spaceTatsuhiro Tsujikawa
2012-05-26Add --metalink to --helpant
2012-05-26Add Metalink information and --metalink option to man pageant
2012-05-26Add Metalink information and --metalink option to man pageant
2012-05-26Adds Metalink information to INSTALLant
2012-05-26--metalink option is available regardless of Metalink support.Tatsuhiro Tsujikawa
2012-05-26metalink: parse downloaded Metalink fileTatsuhiro Tsujikawa
Parse downloaded Metalink file and add downloads described there. Fixed compile error without metalink support.
2012-05-26Fixed HAVE_LIBMETALINK conditional is always trueTatsuhiro Tsujikawa
2012-05-26metalink: minor metalinkfile fixTatsuhiro Tsujikawa
Don't update config->metalinkfile_last in operate(). Use local variable to point to the current metalinkfile.
2012-05-26metalink: show help message even if disabledTatsuhiro Tsujikawa
Print message if --metalink is used while metalink support is not enabled. Migrated Metalink support in tool_operate.c and removed operatemetalink().
2012-05-26Applied patches from DanielTatsuhiro Tsujikawa
2012-05-26Support Metalink.Tatsuhiro Tsujikawa
This change adds experimental Metalink support to curl. To enable Metalink support, run configure with --with-libmetalink. To feed Metalink file to curl, use --metalink option like this: $ curl -O --metalink foo.metalink We use libmetalink to parse Metalink files.
2012-05-26DOCS: Fixed line spacing of authentication examples in CURLOPT_URLSteve Holme
2012-05-26DOCS: Changed domain names in various examples to example.comSteve Holme
Updated various references of real domain names to example.com as per RFC-2606.
2012-05-26DOCS: Fixed meaning of bit 2 in CURLOPT_POSTREDIRSteve Holme
Setting bit 2 for this value was documented as having a constant value defined as CURL_REDIR_POST_303 yet referenced a 302 request. Additionally corrected the meaning of CURL_REDIR_POST_ALL for all three bits and fixed problems with the bolding of keywords in this section.
2012-05-26DOCS: Standardised how RFCs are referenced.Steve Holme
Standardised how RFCs are referenced so that the website may autolink to the correct documentation on ietf.org. Additionally removed the one link to RFC3986 on curl.haxx.se.
2012-05-26Fix libcurl.pc and curl-config generation for static MingW* cross buildsYang Tse
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-18 12:49:45 +0000