aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-04-25smtp: set auth correctlyDaniel Stenberg
Regression since 7.69.0 and 68fb25fa3fcff. The code wrongly assigned 'from' instead of 'auth' which probably was a copy and paste mistake from other code, leading to that auth could remain NULL and later cause an error to be returned. Assisted-by: Eric Sauvageau Fixes #5294 Closes #5295
2020-04-25lib: clean up whitespaceMarcel Raad
This fixes CodeFactor warnings.
2020-04-25libssh: avoid options override by configuration filesAnderson Toshiyuki Sasaki
Previously, options set explicitly through command line options could be overridden by the configuration files parsed automatically when ssh_connect() was called. By calling ssh_options_parse_config() explicitly, the configuration files are parsed before setting the options, avoiding the options override. Once the configuration files are parsed, the automatic configuration parsing is not executed. Fixes #4972 Closes #5283 Signed-off-by: Anderson Toshiyuki Sasaki <ansasaki@redhat.com>
2020-04-25runtests: when <killserver> mentions http, kill http/2 tooDaniel Stenberg
Since the http2 test server is a mere proxy that needs to know about the dynamic port the HTTP server is using, it too needs to get restarted when the http server is killed. A regression caused by 80d6515. Fixes #5289 Closes #5291
2020-04-25docs: fix two typosYuri Slobodyanyuk
Closes #5292
2020-04-24tests/git: ignore mqttd and port filesEmil Engler
Closes #5290
2020-04-24tests: make runtests check that disabled tests existsDaniel Stenberg
... and error out if so. Removed '536' from DISABLED as there is no such test file. Closes #5288
2020-04-24test1154: set a proper nameDaniel Stenberg
2020-04-23select: make Curl_socket_check take timediff_t timeoutDaniel Stenberg
Coverity found CID 1461718: Integer handling issues (CONSTANT_EXPRESSION_RESULT) "timeout_ms > 9223372036854775807L" is always false regardless of the values of its operands. This occurs as the logical second operand of "||". Closes #5240
2020-04-23libcurl-multi.3: added missing full stopi-ky
Closes #5285
2020-04-22transfer: Switch PUT to GET/HEAD on 303 redirectJay Satiro
Prior to this change if there was a 303 reply to a PUT request then the subsequent request to respond to that redirect would also be a PUT. It was determined that was most likely incorrect based on the language of the RFCs. Basically 303 means "see other" resource, which implies it is most likely not the same resource, therefore we should not try to PUT to that different resource. Refer to the discussions in #5237 and #5248 for more information. Fixes https://github.com/curl/curl/issues/5237 Closes https://github.com/curl/curl/pull/5248
2020-04-22lib/mk-ca-bundle: skip empty certsDaniel Stenberg
Reviewed-by: Emil Engler Reported-by: Ashwin Metpalli Fixes #5278 Closes #5280
2020-04-22version: skip idn2_check_version() check and add precautionDaniel Stenberg
A gcc-10's -fanalyze complaint made me spot and do these improvements. Closes #5281
2020-04-22RELEASE-NOTES: syncedDaniel Stenberg
2020-04-22curl.h: update comment typoBrian Bergeron
"routines with be invoked" -> "routines will be invoked" Closes #5279
2020-04-21GnuTLS: Don't skip really long certificate fieldsEmil Engler
Closes #5271
2020-04-21gnutls: bump lowest supported version to 3.1.10Daniel Stenberg
GnuTLS 3.1.10 added new functions we want to use. That version was released on Mar 22, 2013. Removing support for older versions also greatly simplifies the code. Ref: #5271 Closes #5276
2020-04-20mqtt: make NOSTATE get within the debug name arrayDaniel Stenberg
2020-04-20tests: run the RTSP test server on a dynamic port numberDaniel Stenberg
To avoid port collisions. Closes #5272
2020-04-20tests: add %NOLISTENPORT and use itDaniel Stenberg
The purpose with this variable is to provide a port number that is reasonably likely to not have a listener on the local host so that tests can try connect failures against it. It uses port 47 - "reserved" according to IANA. Updated six tests to use it instead of the previous different ports. Assisted-by: Emil Engler Closes #5270
2020-04-20mqtt: remove code with no purposeDaniel Stenberg
Detected by Coverity. CID 1462319. "The same code is executed when the condition result is true or false, because the code in the if-then branch and after the if statement is identical." Closes #5275
2020-04-20mqtt: fix Curl_read() error handling while reading remaining lengthDaniel Stenberg
Detected by Coverity. CID 1462320. Closes #5274
2020-04-20server/tftpd: fix compiler warningDaniel Stenberg
Follow-up from 369ce38ac1d Reported-by: Marc Hörsken
2020-04-20http: free memory when Alt-Used header creation fails due to OOMDaniel Stenberg
Reported-by: James Fuller Fixes #5268 Closes #5269
2020-04-20lib: fix typos in comments and errormessagesDaniel Gustafsson
This fixes a few randomly spotted typos in recently merged code, most notably one in a userfacing errormessage the schannel code.
2020-04-20tests: run the SOCKS test server on a dynamic port numberDaniel Stenberg
Closes #5266
2020-04-20multi-ssl: reset the SSL backend on `Curl_global_cleanup()`Johannes Schindelin
When cURL is compiled with support for multiple SSL backends, it is possible to configure an SSL backend via `curl_global_sslset()`, but only *before* `curl_global_init()` was called. If another SSL backend should be used after that, a user might be tempted to call `curl_global_cleanup()` to start over. However, we did not foresee that use case and forgot to reset the SSL backend in that cleanup. Let's allow that use case. Fixes #5255 Closes #5257 Reported-by: davidedec on github Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2020-04-20tests: run the TFTP test server on a dynamic port numberDaniel Stenberg
Picking a dynamic unused port is better than a fixed to avoid the collision risk. Closes #5265
2020-04-20mqtt: improve the state machineDaniel Stenberg
To handle PUBLISH before SUBACK and more. Updated the existing tests and added three new ones. Reported-by: Christoph Krey Bug: https://curl.haxx.se/mail/lib-2020-04/0021.html Closes #5246
2020-04-20runtests: always put test number in servercmd fileDaniel Stenberg
2020-04-20RELEASE-NOTES: syncedDaniel Stenberg
2020-04-20release-notes.pl: fix parsing typoDaniel Stenberg
2020-04-20ensure all references to ports are replaced by varsxquery
2020-04-20add more alt-svc test coveragexquery
2020-04-20test1247: use http server to get the port number setDaniel Stenberg
Follow-up to 0f5db7b263f
2020-04-19runtests: use a unix domain socket path with the pid in the nameDaniel Stenberg
To make it impossible for test cases to access the file name without using the proper variable for the purpose. Closes #5264
2020-04-19src: Remove C99 constructs to ensure C89 complianceTom
This fixes the error: 'for' loop initial declaration used outside C99 mode by declaring the loop increment variable in the beginning of the block instead of inside the for loop. Fixes #5254 Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
2020-04-19runtests: dummy init the ports variables to avoid warningsDaniel Stenberg
... and generate something that can help debug test cases.
2020-04-19mime: properly check Content-Type even if it has parametersPatrick Monnerat
New test 669 checks this fix is effective. Fixes #5256 Closes #5258 Reported-by: thanhchungbtc on github
2020-04-19tests/FILEFORMAT: converted to markdown and extendedDaniel Stenberg
Closes #5261
2020-04-18test1245: make it work with dynamic FTP server portDaniel Stenberg
2020-04-18test1055: make it work with dynamic FTP portDaniel Stenberg
2020-04-18test1028: make it run on dynamic FTP server portDaniel Stenberg
2020-04-18tests: move pingpong server to dynamic listening portDaniel Stenberg
FTP, IMAP, POP3, SMTP and their IPv6 versions are now all on dynamic ports Test 842-845 are unfortunately a bit hard to move over to this concept right now and require "default port" still...
2020-04-18test1056: work with dynamic HTTP ipv6 portDaniel Stenberg
2020-04-18test1448: work with dynamic HTTP server portDaniel Stenberg
2020-04-18tests: introduce preprocessed test casesDaniel Stenberg
The runtests script now always performs variable replacement on the entire test source file before the test gets executed, and saves the updated version in a temporary file (log/test[num]) so that all test case readers/servers can use that version (if present) and thus enjoy the powers of test case variable substitution. This is necessary to allow complete port number freedom. Test 309 is updated to work with a non-fixed port number thanks to this.
2020-04-18tests: make 2006-2010 handle different port number lengthsDaniel Stenberg
2020-04-18tests: run the sws server on "any port"Daniel Stenberg
Makes the test servers for HTTP and Gopher pop up on a currently unused port and runtests adapts to that! Closes #5247
2020-04-18sockfilt: tidy variable naming and data structure in select_wsMarc Hoersken
This commit does not introduce any logical changes to the code. Reviewed-by: Jay Satiro and Marcel Raad Closes #5238
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-07 00:25:47 +0000