aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-05-20gtls: don't fail on non-fatal alerts during handshakeDmitry Eremin-Solenikov
Stop curl from failing when non-fatal alert is received during handshake. This e.g. fixes lots of problems when working with https sites through proxies.
2015-05-20curl_easy_unescape.3: update RFC referenceDaniel Stenberg
Reported-by: bsammon Bug: https://github.com/bagder/curl/issues/282
2015-05-20CURLOPT_POSTFIELDS.3: Mention curl_easy_escapeJay Satiro
.. also correct some variable naming in curl_easy_escape.3 Bug: https://github.com/bagder/curl/issues/281 Reported-by: bsammon@users.noreply.github.com
2015-05-19openssl: Use SSL_CTX_set_msg_callback and SSL_CTX_set_msg_callback_argBrian Prodoehl
BoringSSL removed support for direct callers of SSL_CTX_callback_ctrl and SSL_CTX_ctrl, so move to a way that should work on BoringSSL and OpenSSL. re #275
2015-05-19curl.1: fix missing space in section --dataJay Satiro
2015-05-19transfer: remove erroneous and misleading commentDaniel Stenberg
2015-05-19http: silence compile-time warnings without USE_NGHTTP2Kamil Dudka
Error: CLANG_WARNING: lib/http.c:173:16: warning: Value stored to 'http' during its initialization is never read Error: COMPILER_WARNING: lib/http.c: scope_hint: In function ‘http_disconnect’ lib/http.c:173:16: warning: unused variable ‘http’ [-Wunused-variable]
2015-05-19transfer: Replace __func__ instances with function nameJay Satiro
.. also make __func__ replacement in multi. Prior to this change debug builds would fail to build if the compiler was building pre-c99 and didn't support __func__.
2015-05-19build: bump version in default nghttp2 pathsViktor Szakats
2015-05-19INTERNALS: we require nghttp2 1.0.0+ nowDaniel Stenberg
2015-05-18http: Add some include guards for the new HTTP/2 stuffJay Satiro
2015-05-18http2: store upload state per streamDaniel Stenberg
Use a curl_off_t for upload left
2015-05-18http2: fix build when NOT h2-enabledDaniel Stenberg
2015-05-18http2: switch to use Curl_hash_destroy()Daniel Stenberg
as after 4883f7019d3, the *_clean() function only flushes the hash.
2015-05-18curlver: restore LIBCURL_VERSION_NUM defined as a full numberDaniel Stenberg
As it breaks configure, curl-config and test 1023 if not.
2015-05-18hostip: fix unintended destruction of hash tableAnthony Avina
.. and added unit1602 for hash.c
2015-05-18curlver: introducing new version number (checking) macrosDaniel Stenberg
2015-05-18runtests.pl: use 'h2c' now, no -14 anymoreDaniel Stenberg
2015-05-18http2: Ignore if we have stream ID not in hash in on_stream_closeTatsuhiro Tsujikawa
We could get stream ID not in the hash in on_stream_close. For example, if we decided to reject stream (e.g., PUSH_PROMISE), then we don't create stream and store it in hash with its stream ID.
2015-05-18Require nghttp2 v1.0.0Tatsuhiro Tsujikawa
This commit requires nghttp2 v1.0.0 to compile, and migrate to v1.0.0, and utilize recent version of nghttp2 to simplify the code, First we use nghttp2_option_set_no_recv_client_magic function to detect nghttp2 v1.0.0. That function only exists since v1.0.0. Since nghttp2 v0.7.5, nghttp2 ensures header field ordering, and validates received header field. If it found error, RST_STREAM with PROTOCOL_ERROR is issued. Since we require v1.0.0, we can utilize this feature to simplify libcurl code. This commit does this. Migration from 0.7 series are done based on nghttp2 migration document. For libcurl, we removed the code sending first 24 bytes client magic. It is now done by nghttp2 library. on_invalid_frame_recv callback signature changed, and is updated accordingly.
2015-05-18http2: infof length in on_frame_send()Daniel Stenberg
2015-05-18pipeline: switch some code over to functionsDaniel Stenberg
... to "compartmentalize" a bit and make it easier to change behavior when multiplexing is used instead of good old pipelining.
2015-05-18symbols-in-versions: add CURLOPT_PIPEWAITDaniel Stenberg
2015-05-18CURLOPT_PIPEWAIT: addedDaniel Stenberg
By setting this option to 1 libcurl will wait for a connection to reveal if it is possible to pipeline/multiplex on before it continues.
2015-05-18Curl_http_readwrite_headers: minor code simplificationDaniel Stenberg
2015-05-18IsPipeliningPossible: fixed for http2Daniel Stenberg
2015-05-18http2: bump the h2 buffer size to 32K for speedDaniel Stenberg
2015-05-18http2: remove the stream from the hash in stream_close callbackDaniel Stenberg
... and suddenly things work much better!
2015-05-18http2: if there is paused data, do not clear the drain fieldDaniel Stenberg
2015-05-18http2: rename s/data/pausedataDaniel Stenberg
2015-05-18http2: "stream %x" in all outputs to make it easier to search forDaniel Stenberg
2015-05-18http2: Curl_expire() all handles with incoming trafficDaniel Stenberg
... so that they'll get handled next in the multi loop.
2015-05-18http2: don't signal settings change for same valuesDaniel Stenberg
2015-05-18http2: set default concurrency, fix ConnectionExists for multiplexDaniel Stenberg
2015-05-18bundles: store no/default/pipeline/multiplexDaniel Stenberg
to allow code to act differently on the situation. Also added some more info message for the connection re-use function to make it clearer when connections are not re-used.
2015-05-18http2: lazy init header_recvbufDaniel Stenberg
It makes us use less memory when not doing HTTP/2 and subsequently also makes us not have to cleanup HTTP/2 related data when not using HTTP/2!
2015-05-18http2: separate multiplex/pipelining + cleanup memory leaksDaniel Stenberg
2015-05-18CURLMOPT_PIPELINE: bit 1 is for multiplexingDaniel Stenberg
2015-05-18http2: Fix bug that data to be drained are overwritten by pending "paused" dataTatsuhiro Tsujikawa
2015-05-18http2: Don't call nghttp2_session_mem_recv while it is paused by a streamTatsuhiro Tsujikawa
2015-05-18http2: Read data left in connection buffer after pauseTatsuhiro Tsujikawa
Previously when we do pause because of out of buffer, we just throw away unread data in connection buffer. This just broke protocol framing, and I saw occasional FRAME_SIZE_ERROR. This commit fix this issue by remembering how much data read, and in the next iteration, we process remaining data.
2015-05-18http2: Fix streams get stuckTatsuhiro Tsujikawa
This commit fixes the bug that streams get stuck if stream gets some DATA, and stream->closed becomes true at the same time. Previously, in this condition, after we processed DATA, we are going to try to read data from underlying transport, but there is no data, and gets EAGAIN. There was no code path to evaludate stream->closed.
2015-05-18http2: store incoming h2 SETTINGSDaniel Stenberg
2015-05-18pipeline: move function to pipeline.c and make staticDaniel Stenberg
... as it was only used from there.
2015-05-18IsPipeliningPossible: http2 can always "pipeline" (multiplex)Daniel Stenberg
2015-05-18http2: remove debug logging from on_frame_recvDaniel Stenberg
2015-05-18http2: remove the closed check in http2_recvDaniel Stenberg
With the "drained" functionality we can get here slightly asynchronously so the stream have have been closed but there is pending data left to read.
2015-05-18http2: bump the h2 buffer to 8KDaniel Stenberg
2015-05-18http2: Curl_read should not use the single bufferDaniel Stenberg
... as it does for pipelining when we're multiplexing, as we need the different buffers to store incoming data correctly for all streams.
2015-05-18http2: more debug outputsDaniel Stenberg