aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2018-12-22disconnect: separate connections and easy handles betterDaniel Stenberg
Do not assume/store assocation between a given easy handle and the connection if it can be avoided. Long-term, the 'conn->data' pointer should probably be removed as it is a little too error-prone. Still used very widely though. Reported-by: masbug on github Fixes #3391 Closes #3400
2018-12-22libssh: free sftp_canonicalize_path() data correctlyDaniel Stenberg
Assisted-by: Harry Sintonen Fixes #3402 Closes #3403
2018-12-21RELEASE-NOTES: syncedDaniel Stenberg
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-12-21if2ip: remove unused function Curl_if_is_interface_nameDaniel Stenberg
Closes #3401
2018-12-20http2: clear pause stream id if it gets closedDaniel Stenberg
Reported-by: Florian Pritz Fixes #3392 Closes #3399
2018-12-20wolfssl: Perform cleanupDavid Garske
This adds a cleanup callback for cyassl. Resolves possible memory leak when using ECC fixed point cache. Closes #3395 Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Daniel Gustafsson <daniel@yesql.se>
2018-12-20mbedtls: follow-up VERIFYHOST fix from f097669248Daniel Stenberg
Fix-by: Eric Rosenquist Fixes #3376 Closes #3390
2018-12-20curlver: bump to 7.64.0 for next releaseDaniel Stenberg
2018-12-19cookies: extend domain checks to non psl buildsDaniel Gustafsson
Ensure to perform the checks we have to enforce a sane domain in the cookie request. The check for non-PSL enabled builds is quite basic but it's better than nothing. Closes #2964 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-19smb: fix incorrect path in request if connection reusedMatus Uzak
Follow-up to 09e401e01bf9. If connection gets reused, then data member will be copied, but not the proto member. As a result, in smb_do(), path has been set from the original proto.share data. Closes #3388
2018-12-19curl -J: do not append to the destination fileDaniel Stenberg
Reported-by: Kamil Dudka Fixes #3380 Closes #3381
2018-12-17mbedtls: use VERIFYHOSTDaniel Stenberg
Previously, VERIFYPEER would enable/disable all checks. Reported-by: Eric Rosenquist Fixes #3376 Closes #3380
2018-12-17pingpong: change default response timeout to 120 secondsDaniel Stenberg
Previously it was 30 minutes
2018-12-17pingpong: ignore regular timeout in disconnect phaseDaniel Stenberg
The timeout set with CURLOPT_TIMEOUT is no longer used when disconnecting from one of the pingpong protocols (FTP, IMAP, SMTP, POP3). Reported-by: jasal82 on github Fixes #3264 Closes #3374
2018-12-14TODO: Windows: set attribute 'archive' for completed downloadsDaniel Stenberg
Closes #3354
2018-12-14RELEASE-NOTES: syncedDaniel Stenberg
2018-12-14http: minor whitespace cleanup from f464535bDaniel Stenberg
2018-12-14http: Implement trailing headers for chunked transfersAyoub Boudhar
This adds the CURLOPT_TRAILERDATA and CURLOPT_TRAILERFUNCTION options that allow a callback based approach to sending trailing headers with chunked transfers. The test server (sws) was updated to take into account the detection of the end of transfer in the case of trailing headers presence. Test 1591 checks that trailing headers can be sent using libcurl. Closes #3350
2018-12-14darwinssl: accept setting max-tls with default min-tlsDaniel Stenberg
Reported-by: Andrei Neculau Fixes #3367 Closes #3373
2018-12-13gopher: fix memory leak from 9026083ddb2a9Daniel Stenberg
2018-12-13test1201: Add a trailing `?' to the selectorLeonardo Taccari
This verify that the `?' in the selector is kept as is. Verifies the fix in #3370
2018-12-13gopher: always include the entire gopher-path in requestLeonardo Taccari
After the migration to URL API all octets in the selector after the first `?' were interpreted as query and accidentally discarded and not passed to the server. Add a gopherpath to always concatenate possible path and query URL pieces. Fixes #3369 Closes #3370
2018-12-13urlapi: distinguish possibly empty queryLeonardo Taccari
If just a `?' to indicate the query is passed always store a zero length query instead of having a NULL query. This permits to distinguish URL with trailing `?'. Fixes #3369 Closes #3370
2018-12-13OS400: handle memory error in list conversionDaniel Gustafsson
Curl_slist_append_nodup() returns NULL when it fails to create a new item for the specified list, and since the coding here reassigned the new list on top of the old list it would result in a dangling pointer and lost memory. Also, in case we hit an allocation failure at some point during the conversion, with allocation succeeding again on the subsequent call(s) we will return a truncated list around the malloc failure point. Fix by assigning to a temporary list pointer, which can be checked (which is the common pattern for slist appending), and free all the resources on allocation failure. Closes #3372 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-13cookies: leave secure cookies aloneDaniel Gustafsson
Only allow secure origins to be able to write cookies with the 'secure' flag set. This reduces the risk of non-secure origins to influence the state of secure origins. This implements IETF Internet-Draft draft-ietf-httpbis-cookie-alone-01 which updates RFC6265. Closes #2956 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-13docs: fix the --tls-max descriptionDaniel Stenberg
Reported-by: Tobias Lindgren Pointed out in #3367 Closes #3368
2018-12-12urlapi: Fix port parsing of eol colonDaniel Gustafsson
A URL with a single colon without a portnumber should use the default port, discarding the colon. Fix, add a testcase and also do little bit of comment wordsmithing. Closes #3365 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-12RELEASE-NOTES: 7.63.0Daniel Stenberg
2018-12-12THANKS: from the curl 7.62.0 cycleDaniel Stenberg
2018-12-12test1519: use lib1518 and test CURLINFO_REDIRECT_URL moreDaniel Stenberg
2018-12-12Curl_follow: extract the Location: header field unvalidatedDaniel Stenberg
... when not actually following the redirect. Otherwise we return error for this and an application can't extract the value. Test 1518 added to verify. Reported-by: Pavel Pavlov Fixes #3340 Closes #3364
2018-12-11multi: convert two timeout variables to timediff_tDaniel Stenberg
The time_t type is unsigned on some systems and these variables are used to hold return values from functions that return timediff_t already. timediff_t is always a signed type. Closes #3363
2018-12-11delta: use --diff-filter on the git diff-tree invokesDaniel Stenberg
Suggested-by: Dave Reisner
2018-12-11documentation: curl_formadd field and file names are now escapedPatrick Monnerat
Prior to 7.56.0, fieldnames and filenames were set in Content-Disposition header without special processing: this may lead to invalid RFC 822 quoted-strings. 7.56.0 introduces escaping of backslashes and double quotes in these names: mention it in the documentation. Reported-by: daboul on github Closes #3361
2018-12-11scripts/delta: show repo delta info from last releaseDaniel Stenberg
... where "last release" should be the git tag in the repo.
2018-12-11tests: add urlapi unittestDaniel Gustafsson
This adds a new unittest intended to cover the internal functions in the urlapi code, starting with parse_port(). In order to avoid name collisions in debug builds, parse_port() is renamed Curl_parse_port() since it will be exported. Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
2018-12-11urlapi: fix portnumber parsing for ipv6 zone indexDaniel Gustafsson
An IPv6 URL which contains a zone index includes a '%%25<zode id>' string before the ending ']' bracket. The parsing logic wasn't set up to cope with the zone index however, resulting in a malformed url error being returned. Fix by breaking the parsing into two stages to correctly handle the zone index. Closes #3355 Closes #3319 Reported-by: tonystz on Github Reviewed-by: Daniel Stenberg <daniel@haxx.se> Reviewed-by: Marcel Raad <Marcel.Raad@teamviewer.com>
2018-12-11http: fix HTTP auth to include query in URIJay Satiro
- Include query in the path passed to generate HTTP auth. Recent changes to use the URL API internally (46e1640, 7.62.0) inadvertently broke authentication URIs by omitting the query. Fixes https://github.com/curl/curl/issues/3353 Closes #3356
2018-12-11http: don't set CURLINFO_CONDITION_UNMET for http status code 204Michael Kaufmann
The http status code 204 (No Content) should not change the "condition unmet" flag. Only the http status code 304 (Not Modified) should do this. Closes #359
2018-12-11ldap: fix LDAP URL parsing regressionsSamuel Surtees
- Match URL scheme with LDAP and LDAPS - Retrieve attributes, scope and filter from URL query instead Regression brought in 46e164069d1a5230 (7.62.0) Closes #3362
2018-12-10RELEASE-NOTES: syncedDaniel Stenberg
2018-12-10(lib)curl.rc: fixup for minor bugsStefan Kanthak
All resources defined in lib/libcurl.rc and curl.rc are language neutral. winbuild/MakefileBuild.vc ALWAYS defines the macro DEBUGBUILD, so the ifdef's in line 33 of lib/libcurl.rc and src/curl.rc are wrong. Replace the hard-coded constants in both *.rc files with #define'd values. Thumbs-uped-by: Rod Widdowson, Johannes Schindelin URL: https://curl.haxx.se/mail/lib-2018-11/0000.html Closes #3348
2018-12-09test329: verify cookie max-age=0 immediate expiryDaniel Stenberg
2018-12-09cookies: expire "Max-Age=0" immediatelyDaniel Stenberg
Reported-by: Jeroen Ooms Fixes #3351 Closes #3352
2018-12-08Upon HTTP_1_1_REQUIRED, retry the request with HTTP/1.1Johannes Schindelin
This is a companion patch to cbea2fd2c (NTLM: force the connection to HTTP/1.1, 2018-12-06): with NTLM, we can switch to HTTP/1.1 preemptively. However, with other (Negotiate) authentication it is not clear to this developer whether there is a way to make it work with HTTP/2, so let's try HTTP/2 first and fall back in case we encounter the error HTTP_1_1_REQUIRED. Note: we will still keep the NTLM workaround, as it avoids an extra round trip. Daniel Stenberg helped a lot with this patch, in particular by suggesting to introduce the Curl_h2_http_1_1_error() function. Closes #3349 Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2018-12-07openssl: fix unused variable compiler warning with old opensslBen Greear
URL: https://curl.haxx.se/mail/lib-2018-11/0055.html Closes #3347
2018-12-07NTLM: force the connection to HTTP/1.1Johannes Schindelin
Since v7.62.0, cURL tries to use HTTP/2 whenever the server announces the capability. However, NTLM authentication only works with HTTP/1.1, and will likely remain in that boat (for details, see https://docs.microsoft.com/en-us/iis/get-started/whats-new-in-iis-10/http2-on-iis#when-is-http2-not-supported). When we just found out that we want to use NTLM, and when the current connection runs in HTTP/2 mode, let's force the connection to be closed and to be re-opened using HTTP/1.1. Fixes https://github.com/curl/curl/issues/3341. Closes #3345 Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2018-12-07curl_global_sslset(): id == -1 is not necessarily an errorJohannes Schindelin
It is allowed to call that function with id set to -1, specifying the backend by the name instead. We should imitate what is done further down in that function to allow for that. Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de> Closes #3346
2018-12-06.gitattributes: make tabs in indentation a visible errorJohannes Schindelin
Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>