aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2020-03-07lib1564: reduce number of mid-wait wakeup callsDaniel Stenberg
This test does A LOT of *wakeup() calls and then calls curl_multi_poll() twice. The first *poll() is then expected to return early and the second not - as the first is supposed to drain the socketpair pipe. It turns out however that when given "excessive" amounts of writes to the pipe, some operating systems (the Solaris based are known) will return EAGAIN before the pipe is drained, which in our test case causes the second *poll() call to also abort early. This change attempts to avoid the OS-specific behaviors in the test by reducing the amount of wakeup calls from 1234567 to 10. Reported-by: Andy Fiddaman Fixes #5037 Closes #5058
2020-03-07mime: fix the binary encoder to handle large data properlyPatrick Monnerat
New test 666 checks this is effective. As upload buffer size is significant in this kind of tests, shorten it in similar test 652. Fixes #4860 Closes #4833 Reported-by: RuurdBeerstra on github
2020-03-07mime: do not perform more than one read in a rowPatrick Monnerat
Input buffer filling may delay the data sending if data reads are slow. To overcome this problem, file and callback data reads do not accumulate in buffer anymore. All other data (memory data and mime framing) are considered as fast and still concatenated in buffer. As this may highly impact performance in terms of data overhead, an early end of part data check is added to spare a read call. When encoding a part's data, an encoder may require more bytes than made available by a single read. In this case, the above rule does not apply and reads are performed until the encoder is able to deliver some data. Tests 643, 644, 645, 650 and 654 have been adapted to the output data changes, with test data size reduced to avoid the boredom of long lists of 1-byte chunks in verification data. New test 667 checks mimepost using single-byte read callback with encoder. New test 668 checks the end of part data early detection. Fixes #4826 Reported-by: MrdUkk on github
2020-03-07mime: latch last read callback status.Patrick Monnerat
In case a read callback returns a status (pause, abort, eof, error) instead of a byte count, drain the bytes read so far but remember this status for further processing. Takes care of not losing data when pausing, and properly resume a paused mime structure when requested. New tests 670-673 check unpausing cases, with easy or multi interface and mime or form api. Fixes #4813 Reported-by: MrdUkk on github
2020-03-07runtests: fix missing use of exe_ext helper functionMarc Hoersken
2020-03-07ares: store dns parameters for duphandleErnst Sjöstrand
With c-ares the dns parameters lives in ares_channel. Store them in the curl handle and set them again in easy_duphandle. Regression introduced in #3228 (6765e6d), shipped in curl 7.63.0. Fixes #4893 Closes #5020 Signed-off-by: Ernst Sjöstrand <ernst.sjostrand@verisure.com>
2020-03-07version: make curl_version* thread-safe without using global contextDaniel Stenberg
Closes #5010
2020-03-07RELEASE-NOTES: syncedDaniel Stenberg
2020-03-07tests: use native Sleep function as fallback on WindowsMarc Hoersken
Reviewed-By: Daniel Stenberg Closes #5054
2020-03-07perl: align order and completeness of Windows OS checksMarc Hoersken
2020-03-07tool_cb_see: set correct copyright year rangeDaniel Stenberg
Follow-up to a39e5bfb9
2020-03-07seek: fix fallback for missing ftruncate on WindowsMarc Hoersken
This fixes test 198 on versions of MinGW-w64 without ftruncate Reviewed-By: Daniel Stenberg Reviewed-By: Marcel Raad Closes #5055
2020-03-07config-win32: Windows does not have ftruncateMarc Hoersken
2020-03-07pause: force a connection (re-)check after unpausingDaniel Stenberg
There might be data available that was already read off the socket, for example in the TLS layer. Reported-by: Anders Berg Fixes #4966 Closes #5049
2020-03-07socks5: switch state properly when the resolve is doneDaniel Stenberg
Regression from 4a4b63d (and #4907) Reported-by: vitaha85 on github Fixes #5053 Closes #5056
2020-03-07libssh: Fix matching user-specified MD5 hex keyJay Satiro
Prior to this change a match would never be successful because it was mistakenly coded to compare binary data from libssh to a user-specified hex string (ie CURLOPT_SSH_HOST_PUBLIC_KEY_MD5). Reported-by: fds242@users.noreply.github.com Fixes https://github.com/curl/curl/issues/4971 Closes https://github.com/curl/curl/pull/4974
2020-03-06pause: bail out on bad inputDaniel Stenberg
A NULL easy handle or an easy handle without an associated connection cannot be paused or unpaused. Closes #5050
2020-03-06unit1612: fixed the inclusion and compilation of the HMAC unit testSteve Holme
Follow up to 3f74e5e6 to fix: - A typo in Makefile.inc where unit1611 was used instead - Some compilation issues in unit1612.c Closes #5024
2020-03-06pause: return early for calls that don't change pause stateDaniel Stenberg
Reviewed-by: Patrick Monnerat Ref: #4833 Closes #5026
2020-03-06curl_share_setopt.3: Note sharing cookies doesn't enable the engineJay Satiro
Follow-up to d0a7ee3 which fixed a bug in 7.66.0 that caused CURL_LOCK_DATA_COOKIE to enable the easy handle's cookie engine. Bug: https://curl.haxx.se/mail/lib-2020-03/0019.html Reported-by: Felipe Gasper Closes https://github.com/curl/curl/pull/5048
2020-03-06multi: skip EINTR check on wakeup socket if it was closedJay Satiro
- Don't check errno on wakeup socket if sread returned 0 since sread doesn't set errno in that case. This is a follow-up to cf7760a from several days ago which fixed Curl_multi_wait to stop busy looping sread on the non-blocking wakeup socket if it was closed (ie sread returns 0). Due to a logic error it was still possible to busy loop in that case if errno == EINTR. Closes https://github.com/curl/curl/pull/5047
2020-03-06transfer: set correct copyright year rangeDaniel Stenberg
2020-03-06urldata: remove the 'stream_was_rewound' connectdata struct memberDaniel Stenberg
... as it is never set anywhere. Follow-up to 2f44e94ef Closes #5046
2020-03-05Revert "pause: force-drain the transfer on unpause"Daniel Stenberg
This reverts commit fa0216b294af4c7113a9040ca65eefc7fc18ac1c (from #5000) Clearly that didn't solve the problem correctly. Reported-by: Christopher Reid Reopens #4966 Fixes #5044
2020-03-05RELEASE-NOTES: syncedDaniel Stenberg
and bumped curlver.h
2020-03-05MANUAL: update a dict-using command lineDaniel Stenberg
The 'web1913' database is now invalid, use 'gcide' instead.
2020-03-05KNOWN_BUGS: configure --with-gssapi with Heimdal is ignored on macOSDaniel Stenberg
Closes #3841
2020-03-05polarssl: remove more references and mentionsDaniel Stenberg
Assisted-by: Jay Satiro Follow-up to 6357a19ff29dac04 Closes #5036
2020-03-04tests: wrap ignored test failures in bracesMarc Hoersken
2020-03-04tests: align some Windows sleep defines with each otherMarc Hoersken
2020-03-04tests: try to make sleeping portable by avoiding selectMarc Hoersken
select does not support just waiting on Windows: https://perldoc.perl.org/perlport.html#select Reviewed-By: Daniel Stenberg Closes #5035
2020-03-04runtests.1: rephrase how to specify what tests to runDaniel Stenberg
Also mention the new tilde-prefixed way to ignore test results. Reviewed-By: Marc Hoersken Closes #5033
2020-03-04cirrus-ci: disable the FreeBSD 13 buildsDaniel Stenberg
FreeBSD 13.0 is apparently close to a year away from a stable release and has proven to cause intermittent builds failures recently. Assisted-by: Dan Fandrich Assisted-by: Fedor Korotkov Fixes #5028 Closes #5029
2020-03-04RELEASE-NOTES: 7.69.0Daniel Stenberg
2020-03-04THANKS: from 7.69.0Daniel Stenberg
Now sorted case insensitive
2020-03-03ci/tests: fix escaping of testnames and disable proxy for CI APIsMarc Hoersken
Follow up to ada581f and c0d8b96 Closes #5031
2020-03-03cmake: Show HTTPS-proxy in the features outputJay Satiro
- Show HTTPS-proxy in the features output for those backends that support it: OpenSSL, GnuTLS and NSS. Prior to this change HTTPS-proxy was missing from the cmake features output even if curl was built with it. Only cmake output was affected. Both the library and tool correctly reported the feature. Bug: https://curl.haxx.se/mail/lib-2020-03/0008.html Reported-by: David Lopes Closes https://github.com/curl/curl/pull/5025
2020-03-03ci/tests: Make it possible to still run but ignore failing testsMarc Hoersken
This enables the development of a solution for the failing tests by running them on CI while ignoring their result for the overall status. Closes #4994
2020-03-03README.md: add Azure DevOps Pipelines build status badgeMarc Hoersken
2020-03-03ci/tests: Move CI test result creation above environment setupMarc Hoersken
This avoids using our test servers as proxy to the AppVeyor API. Closes #5022
2020-03-03ci/tests: Send test results to AppVeyor for status overviewMarc Hoersken
Closes #5021
2020-03-03Revert "sha256: Added SecureTransport implementation"Daniel Stenberg
This reverts commit 4feb38deed33fed14ff7c370a6a9153c661dbb9c (from #4956) That commit broke test 1610 on macos builds without TLS. Closes #5027
2020-03-03dist: include tests/azure.pm in the tarballDaniel Stenberg
Bug: https://github.com/curl/curl/commit/ada581f2cc32f48c1629b729707ac19208435b27#commitcomment-37601589 Reported-by: Marcel Raad
2020-03-03configure.ac: Disable metalink if mbedTLS is specifiedSteve Holme
Follow up to cdcc9df1 and #5006. Even though I mentioned mbedTLS as being one of the backends that metalink needs to be disabled for, I seem to have included it in the list of allowed SSL/TLS backends in comnfigure.ac :( Closes #5013
2020-03-03sha256: Tidy up following recent changesSteve Holme
Reviewed-by: Daniel Stenberg Closes #4956
2020-03-03sha256: Added WinCrypt implementationSteve Holme
2020-03-03sha256: Added SecureTransport implementationSteve Holme
2020-03-03sha256: Added mbedtls implementationSteve Holme
2020-03-03sha256: Added GNU TLS gcrypt implementationSteve Holme
2020-03-03sha256: Added GNU TLS Nettle implementationSteve Holme
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-04 05:09:55 +0000