aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2015-10-16curlbuild.h: Fix non-configure compiling to mips and sh4 targetsRichard Hosking
2015-10-16http2: Don't pass unitialized name+len pairs to nghttp2_submit_requestAnders Bakken
bug introduced by 18691642931e5c7ac8af83ac3a84fbcb36000f96. Closes #493
2015-10-16test1601: fix compilation with --enable-debug and --disable-crypto-authDan Fandrich
2015-10-16multi: fix off-by-one finit[] array sizeDaniel Stenberg
introduced in c6aedf680f6. It needs to be CURLM_STATE_LAST big since it must hande the range 0 .. CURLM_STATE_MSGSENT (18) and CURLM_STATE_LAST is 19 right now. Reported-by: Dan Fandrich Bug: http://curl.haxx.se/mail/lib-2015-10/0069.html
2015-10-15fread_func: move callback pointer from set to state structDaniel Stenberg
... and assign it from the set.fread_func_set pointer in the Curl_init_CONNECT function. This A) avoids that we have code that assigns fields in the 'set' struct (which we always knew was bad) and more importantly B) it makes it impossibly to accidentally leave the wrong value for when the handle is re-used etc. Introducing a state-init functionality in multi.c, so that we can set a specific function to get called when we enter a state. The Curl_init_CONNECT is thus called when switching to the CONNECT state. Bug: https://github.com/bagder/curl/issues/346 Closes #346
2015-10-14test1531: case the size to fix the test on non-largefile buildsDan Fandrich
2015-10-13acinclude: remove PKGCONFIG overrideDaniel Stenberg
... and allow it to get set by a caller easier. Reported-by: Rainer Jung Bug: http://curl.haxx.se/mail/lib-2015-10/0035.html
2015-10-12docs/INSTALL: Updated example minimal binary sizesDan Fandrich
2015-10-11openssl: Fix set up of pkcs12 certificate verification chainErik Johansson
sk_X509_pop will decrease the size of the stack which means that the loop would end after having added only half of the certificates. Also make sure that the X509 certificate is freed in case SSL_CTX_add_extra_chain_cert fails.
2015-10-09ntlm: error out without 64bit support as the code needs itDaniel Stenberg
It makes it a clearer message for developers reaching that point without the necessary support. Thanks-by: Jay Satiro Closes #78
2015-10-09curl_global_init: set the memory function pointers correctDaniel Stenberg
follow-up from 6f8ecea0
2015-10-09curl_global_init_mem: set function pointers before doing initDaniel Stenberg
... as in the polarssl TLS backend for example it uses memory functions.
2015-10-09http2: Fix http2_recv to return -1 if recv returned -1Jay Satiro
If the underlying recv called by http2_recv returns -1 then that is the value http2_recv returns to the caller.
2015-10-08curl_easy_recv.3: CURLINFO_LASTSOCKET => CURLINFO_ACTIVESOCKETSvyatoslav Mishyn
Closes #479
2015-10-08curl_easy_send.3: CURLINFO_LASTSOCKET => CURLINFO_ACTIVESOCKETSvyatoslav Mishyn
2015-10-08CURLOPT_CONNECT_ONLY.3: CURLINFO_LASTSOCKET => CURLINFO_ACTIVESOCKETSvyatoslav Mishyn
2015-10-08CURLOPT_CERTINFO.3: fix reference to CURLINFO_CERTINFODaniel Stenberg
2015-10-08ntlm: get rid of unconditional use of long longDaniel Stenberg
... since some compilers don't have it and instead use other types, such as __int64. Reported by: gkinseyhpw Closes #478
2015-10-08des: Fix header conditional for Curl_des_set_odd_parityAnders Bakken
Follow up to 613e502.
2015-10-07configure: build silently by defaultDaniel Stenberg
'make V=1' will make the build verbose like before
2015-10-07bump: start climbing toward 7.46.0Daniel Stenberg
2015-10-07RELEASE-PROCEDURE: add the github HTTPS download stepDaniel Stenberg
2015-10-07THANKS: 19 new contributors from the 7.45.0 announcementDaniel Stenberg
2015-10-05RELEASE-NOTES: synced with 69ea57970080Daniel Stenberg
2015-10-04getinfo: Fix return code for unknown CURLINFO optionsJay Satiro
- If a CURLINFO option is unknown return CURLE_UNKNOWN_OPTION. Prior to this change CURLE_BAD_FUNCTION_ARGUMENT was returned on unknown. That return value is contradicted by the CURLINFO option documentation which specifies a return of CURLE_UNKNOWN_OPTION on unknown.
2015-10-04hiperfifo: fix the pointer passed to WRITEDATArouzier
Closes https://github.com/bagder/curl/pull/471
2015-10-02tool_setopt: fix c_escape truncated octalMaksim Stsepanenka
Closes https://github.com/bagder/curl/pull/469
2015-10-01gopher: don't send NUL byteOrange Tsai
Closes #466
2015-09-29runtests: Fix pid check in checkdiedJay Satiro
Because the 'not' operator has a very low precedence and as a result the entire statement was erroneously negated and could never be true.
2015-09-30win32: make recent Borland compilers use long longThorsten Schöning
2015-09-29RELEASE-NOTES: synced with 69b89050d4Daniel Stenberg
2015-09-28openssl: Fix algorithm initMichael Kalinin
- Change algorithm init to happen after OpenSSL config load. Additional algorithms may be available due to the user's config so we initialize the algorithms after the user's config is loaded. Bug: https://github.com/bagder/curl/issues/447 Reported-by: Denis Feklushkin
2015-09-27docs: fix unescaped '\n' in man pagesSvyatoslav Mishyn
Closes https://github.com/bagder/curl/pull/459
2015-09-27http2: set TCP_NODELAY unconditionallyDaniel Stenberg
For a single-stream download from localhost, we managed to increase transfer speed from 1.6MB/sec to around 400MB/sec, mostly because of this single fix.
2015-09-27http2: avoid superfluous Curl_expire() callsDaniel Stenberg
... only call it when there is data arriving for another handle than the one that is currently driving it. Improves single-stream download performance quite a lot. Thanks-to: Tatsuhiro Tsujikawa Bug: http://curl.haxx.se/mail/lib-2015-09/0097.html
2015-09-27readwrite_data: set a max number of loopsDaniel Stenberg
... as otherwise a really fast pipe can "lock" one transfer for some protocols, like with HTTP/2.
2015-09-26CI: Added AppVeyor-CI for curlSergei Nikulov
Closes #439
2015-09-26FTP: fix uploading ASCII with unknown sizeDaniel Stenberg
... don't try to increase the supposed file size on newlines if we don't know what file size it is! Patch-by: lzsiga
2015-09-26build: fix failures with -Wcast-align and -WerrorTatsuhiro Tsujikawa
Closes #457
2015-09-26curl-confopts.m4: Add missing ')'Tatsuhiro Tsujikawa
... for CURL_CHECK_OPTION_RT Closes #456
2015-09-25curl_easy_getinfo.3: Add brief description for each CURLINFOJay Satiro
2015-09-23CMake: Ensure discovered include dirs are consideredJakub Zakrzewski
...during header checks. Otherwise some following header tests (incorrectly) fail. Closes #436
2015-09-23CMake: Put "winsock2.h" before "windows.h" during configure checksJakub Zakrzewski
"windows.h" includes "winsock.h" what causes many redefinition errors if "winsock2.h" is included afterwards and can cause build to fail.
2015-09-23tests: disable 1510 due to CI-problems on githubDaniel Stenberg
2015-09-23gnutls: Report actual GnuTLS error message for certificate errorsMike Crowe
If GnuTLS fails to read the certificate then include whatever reason it provides in the failure message reported to the client. Signed-off-by: Mike Crowe <mac@mcrowe.com>
2015-09-22RELEASE-NOTES: synced with 6b56901b56eDaniel Stenberg
2015-09-22gnutls: Support CURLOPT_KEYPASSWDMike Crowe
The gnutls vtls back-end was previously ignoring any password set via CURLOPT_KEYPASSWD. Presumably this was because gnutls_certificate_set_x509_key_file did not support encrypted keys. gnutls now has a gnutls_certificate_set_x509_key_file2 function that does support encrypted keys. Let's determine at compile time whether the available gnutls supports this new function. If it does then use it to pass the password. If it does not then emit a helpful diagnostic if a password is set. This is preferable to the previous behaviour of just failing to read the certificate without giving a reason in that case. Signed-off-by: Mike Crowe <mac@mcrowe.com>
2015-09-22CURLINFO_TLS_SESSION: always return backend infoDaniel Stenberg
... even for those that don't support providing anything in the 'internals' struct member since it offers a convenient way for applications to figure this out.
2015-09-22tool: remove redundant libcurl checkDaniel Hwang
The easysrc generation is run only when --libcurl is initialized. Ref: https://github.com/bagder/curl/issues/429 Closes #448
2015-09-22CURLOPT_PROXY.3: A proxy given as env variable gets no special treatmentRichard van den Berg
Closes #449
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-01 12:38:37 +0000