aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2010-10-19URL-parsing: consider ? a dividerDaniel Stenberg
The URL parser got a little stricter as it now considers a ? to be a host name divider so that the slightly sloppier URLs work too. The problem that made me do this change was the reported problem with an URL like: www.example.com?email=name@example.com This form of URL is not really a legal URL (due to the missing slash after the host name) but is widely accepted by all major browsers and libcurl also already accepted it, it was just the '@' letter that triggered the problem now. The side-effect of this change is that now libcurl no longer accepts the ? letter as part of user-name or password when given in the URL, which it used to accept (and is tested in test 191). That letter is however mentioned in RFC3986 to be required to be percent encoded since it is used as a divider. Bug: http://curl.haxx.se/bug/view.cgi?id=3090268
2010-10-19curl_easy_setopt.3: spellfixDaniel Stenberg
2010-10-19curl_easy_setopt.3: CURLOPT_USE_SSL is not just for FTPDaniel Stenberg
It is for FTP, SMTP, POP3, IMAP at least.
2010-10-18krb4.h: removed unused prototypesDaniel Stenberg
2010-10-18krb4: make a few functions staticDaniel Stenberg
2010-10-17TODO-RELEASE: cleanup for 7.21.3 worksDaniel Stenberg
"SFTP resume with 4GB file does not work" is now removed as I'm sure this is really a libssh2 bug and not a libcurl bug. 7.21.2 is released already
2010-10-17RELEASE-NOTES: sync with 09a2d93a0f17caDaniel Stenberg
2010-10-17http_chunks: remove debug outputDaniel Stenberg
Accidentally left in there during my previous debugging of this
2010-10-14Curl_setopt: disallow CURLOPT_USE_SSL without SSL supportDaniel Stenberg
In order to avoid for example the pingpong protocols to issue STARTTLS (or equivalent) even though there's no SSL support built-in. Reported by: Sune Ahlgren Bug: http://curl.haxx.se/mail/archive-2010-10/0045.html
2010-10-14options: check for features for some optionsDaniel Stenberg
Some options, such as the automatic decompression and some SSL related ones now will bail out if the underlying libcurl doesn't have support for the particular feature needed.
2010-10-14Fixed the IPv6 host address in test1203Dan Fandrich
Reported by: Christian Weisgerber Bug: http://curl.haxx.se/bug/view.cgi?id=3087479
2010-10-14curl_easy_setopt.3: clarify CURLOPT_CRLFDaniel Stenberg
The option takes a parameter that should be 1 or 0 to enable or disable the feature. URL: http://curl.haxx.se/bug/view.cgi?id=3086428
2010-10-14Some more small Watcom makefile fixes.Guenter Knauf
2010-10-14Added --noconfigure switch to testcurl.pl.Guenter Knauf
2010-10-13Modified Watcom makefiles to work on Linux too.Guenter Knauf
2010-10-13Added MingW32 rtmp target; changed Watcom targets.Guenter Knauf
Modified Watcom targets to avoid backslashs so that they can work on Linux too.
2010-10-13gitignore: ignore Makefile.vc10.dist made by maketgzDaniel Stenberg
2010-10-13curlver.h: start over at 7.21.3Daniel Stenberg
2010-10-13RELEASE-NOTES: start over towards 7.21.3Daniel Stenberg
2010-10-13THANKS: added contributors from 7.21.2Daniel Stenberg
2010-10-12RELEASE-NOTES: synced with ecd624b8e774a85Daniel Stenberg
2010-10-12CMake: Build fix.Julien Chaffraix
Do not match the trailing '\n' in the regular expression as this would make us dump a ) parenthesis on a new line. This fixes the following error: would get transformed into: ) Bug: http://curl.haxx.se/mail/lib-2010-10/0065.html Reported by: Dimitre Dimitrov
2010-10-12header_callback: strip off file path separated with backslashesDaniel Stenberg
If the filename contains a backslash, only use filename portion. The idea is that even systems that don't handle backslashes as path separators probably want that path removed for convenience. This flaw is considered a security problem, see the curl security vulnerability http://curl.haxx.se/docs/adv_20101013.html
2010-10-12Get the curl source files for Amiga from Makefile.incDan Fandrich
This is similar to how it's done in the lib directory. The Amiga build appears to have been broken for a year because of a missing homedir.c
2010-10-12Added section on server-supplied names to security considerationsDan Fandrich
2010-10-12Fixed Watcom makefile.Guenter Knauf
2010-10-12Added build bits for librtmp / libssh2 to Watcom makefiles.Guenter Knauf
2010-10-12Added build bits for librtmp to NetWare makefiles.Guenter Knauf
2010-10-12SFTP: more ignoring negative file sizesDaniel Stenberg
As the change in 5f0ae7a0626cbe709 added a precaution against negative file sizes that for some reason managed to get returned, this change now introduces the same check at the second place in the code where the file size from the libssh2 stat call is used. This check might not be suitable for a 32 bit curl_off_t, but libssh2.h assumes long long to work and to be 64 bit so I believe such a small curl_off_t will be very unlikely to occur in the wild.
2010-10-11SMTP: debug output for no known auth mechanisms supportedDaniel Stenberg
... and some minor source code whitespace edits
2010-10-11test: urlglob error messages have no extra newline anymoreDaniel Stenberg
2010-10-11Added build bits for librtmp to MingW32 makefiles.Guenter Knauf
2010-10-08RELEASE-NOTES: synced with 61f4cdb73ae4Daniel Stenberg
2010-10-08globbing: fix crash on unballanced open braceDaniel Stenberg
Having an open brace without a closing brace caused a segfault. Having a closing brace too many caused a silent error to occur, which caused curl to bail out and return an error code but no error message was shown. It does now! All error message outputs no longer wrongly get _two_ newlines written after the error message. Reported by: Vlad Ureche Bug: http://curl.haxx.se/bug/view.cgi?id=3083942
2010-10-07libcurl.m4: AC_PATH_PROG fixesDan Locks
The invocation of autoconf's AC_PATH_PROG( ) is not quite right for finding curl-config. This fix corrects the negative case (where curl-config is not found).
2010-10-06FAQ: added "How do I submit my patch?"Daniel Stenberg
2010-10-05examples: use example.com in example URLsDaniel Stenberg
2010-10-04TODO-RELEASE: libidn problem not repeatableDaniel Stenberg
"261 - configure and libidn" is removed from the list since Julien Chaffraix tried to repeat it but failed and the reporter did not return to provide further details. Reported by: Lyndon Hill Bug: http://curl.haxx.se/mail/lib-2010-07/0029.html
2010-10-04libcurl.m4: mention argument is PREFIXDaniel Stenberg
The macro provides a --with-libcurl option that expects a PREFIX to be specified and not actually a "directory" in which libcurl will be found. This now spells that out more clearly. Reported by: Dan Locks Bug: http://curl.haxx.se/bug/view.cgi?id=3079891
2010-10-03Some NetWare makefile tweaks.Guenter Knauf
Renamed SDK_* to NDK_*; made NDK_* defines overwriteable from environment; removed now obsolete YACC macro; moved some curl_config.h defines to IPv6 section since they are only needed when IPv6 is enabled - this makes libcurl compile with older NDKs too which were not IPv6-aware.
2010-10-02TODO-RELEASE: 416 error fixedDaniel Stenberg
"3076808 Requests fail silently following a 416 error" done
2010-10-02krb5-gssapi: Removed a memory leak in krb5_auth.Julien Chaffraix
We forgot to release the buffer passed to gss_init_sec_context. The previous logic was difficult to read as we were reusing the same variable (gssbuf) for both input buffer and output buffer. Splitted the logic in 2 variables to better underline who needs to be released. Also made the code break at 80 lines.
2010-10-02krb5-gssapi: Made the function always return a value.Julien Chaffraix
kr5_auth missed a final 'return' statement. This is not an error in gcc but can lead to potential bugs.
2010-10-02krb5-gssapi: Delete the GSS-API context.Julien Chaffraix
This fixes a memory leak related to the GSS-API code. Added a krb5_init and krb5_end functions. Also removed a work-around the lack of proper initialization of the GSS-API context.
2010-10-02HTTP: remove special case for 416Daniel Stenberg
It was pointed out that the special case libcurl did for 416 was incorrect and wrong. 416 is not really different to other errors so the response body must be handled like for other errors/http responses. Reported by: Chris Smowton Bug: http://curl.haxx.se/bug/view.cgi?id=3076808
2010-10-02sws: Added writedelay HTTP server commandDan Fandrich
This delays between write operations, hopefully making it easier to spot problems where libcurl doesn't flush the socket properly before waiting for the next response.
2010-10-01TODO-RELEASE: no bug in ftp_nextconnectDaniel Stenberg
The issue named "266 - Bug in ftp_nextconnect?" was deemed to not be a bug and instead resulted in clarified docs.
2010-10-01curl_easy_setopt.3: CURLOPT_DIRLISTONLY implies dir listDaniel Stenberg
Make it explicit that setting CURLOPT_DIRLISTONLY to 1 will make libcurl to list the directory.
2010-10-01RELEASE-NOTES: synced up to 588402585baeDaniel Stenberg
2010-09-30TODO-RELEASE: move new features to next releaseDaniel Stenberg