Age | Commit message (Collapse) | Author |
|
Detected by torture tests
Closes #4706
|
|
Reported-by: Marcel Raad
Bug: https://github.com/curl/curl/pull/4692#issuecomment-564115734
Closes #4704
|
|
Memory leak found by torture test 58
Closes #4705
|
|
|
|
As a first step to enable it to run over a more diverse set of tests in
a reasonable time.
|
|
When set, shallow mode limits runtests -t to make no more than NUM fails
per test case. If more are found, it will randomly discard entries until
the number is right. The random seed can also be set.
This is particularly useful when running MANY tests as then most torture
failures will already fail the same functions over and over and make the
total operation painfully tedious.
Closes #4699
|
|
This makes them never to be considered "the oldest" to be discarded when
reaching the connection cache limit. The reasoning here is that
CONNECT_ONLY is primarily used in combination with using the
connection's socket post connect and since that is used outside of
curl's knowledge we must assume that it is in use until explicitly
closed.
Reported-by: Pavel Pavlov
Reported-by: Pavel Löbl
Fixes #4426
Fixes #4369
Closes #4696
|
|
Ref: https://github.com/curl/curl/commit/9b879160df01e7ddbb4770904391d3b74114302b#commitcomment-36355622
Closes #4698
|
|
|
|
The coveralls service and test coverage numbers are just too unreliable.
Removed badge from README.md as well.
Fixes #4694
Closes #4695
|
|
Removed the macos libssh2 build from travis
Closes #4686
|
|
Change series of error outputs to use errorf().
Only errors that are due to mistakes in command line option usage should
use helpf(), other types of errors in the tool should rather use
errorf().
Closes #4691
|
|
This enables the use of Windows Subsystem for Linux (WSL) to run the
testsuite against Windows binaries while using Linux servers.
This commit introduces the following environment variables:
- CURL_TEST_EXE_EXT: set the executable extension for all components
- CURL_TEST_EXE_EXT_TOOL: set it for the curl tool only
- CURL_TEST_EXE_EXT_SSH: set it for the SSH tools only
Later testcurl.pl could be adjusted to make use of those variables.
- CURL_TEST_EXE_EXT_SRV: set it for the test servers only
(This is one of several commits to support use of WSL for the tests.)
Closes https://github.com/curl/curl/pull/3899
|
|
Keys created on Windows Subsystem for Linux (WSL) require it for some
reason.
(This is one of several commits to support use of WSL for the tests.)
Ref: https://github.com/curl/curl/pull/3899
|
|
Bash in Windows Subsystem for Linux (WSL) requires it for some reason.
(This is one of several commits to support use of WSL for the tests.)
Ref: https://github.com/curl/curl/pull/3899
|
|
When libcurl is built with MODE=static, c-ares is forced into static
linkage too. That doesn't happen when MODE=dll so linker would break
over undefined symbols.
closes https://github.com/curl/curl/pull/4688
|
|
Closes #4690
|
|
|
|
It could accidentally let the connection get used by more than one
thread, leading to double-free and more.
Reported-by: Christopher Reid
Fixes #4544
Closes #4557
|
|
Closes #4685
|
|
The fseek()s were unnecessary and caused Coverity warning CID 1456554
Closes #4681
|
|
|
|
Closes #4680
|
|
|
|
Add support for CURLSSLOPT_NO_PARTIALCHAIN in CURLOPT_PROXY_SSL_OPTIONS
and OS400 package spec.
Also I added the option to the NameValue list in the tool even though it
isn't exposed as a command-line option (...yet?). (NameValue stringizes
the option name for the curl cmd -> libcurl source generator)
Follow-up to 564d88a which added CURLSSLOPT_NO_PARTIALCHAIN.
Ref: https://github.com/curl/curl/pull/4655
|
|
- Stop treating lack of HTTP2 as an unknown option error result for
CURLOPT_SSL_ENABLE_ALPN and CURLOPT_SSL_ENABLE_NPN.
Prior to this change it was impossible to disable ALPN / NPN if libcurl
was built without HTTP2. Setting either option would result in
CURLE_UNKNOWN_OPTION and the respective internal option would not be
set. That was incorrect since ALPN and NPN are used independent of
HTTP2.
Reported-by: Shailesh Kapse
Fixes https://github.com/curl/curl/issues/4668
Closes https://github.com/curl/curl/pull/4672
|
|
Fixes #4669
Closes #4678
|
|
Move the definition of `CURLRES_IPV6` to before undefining
`HAVE_GETADDRINFO`. Regression from commit 67a08dca27a which caused
some tests to fail and others to be skipped with c-ares.
Fixes https://github.com/curl/curl/issues/4673
Closes https://github.com/curl/curl/pull/4677
|
|
|
|
Options are cross-checked with configure.ac and acinclude.m4.
Tested on Arch Linux, untested on other platforms like Windows or macOS.
Closes #4663
Reviewed-by: Kamil Dudka
|
|
... removed two from travis (that now runs on azure instead)
Closes #4671
|
|
|
|
|
|
This makes it possible to recognize and connect to literal IPv6
addresses when `getaddrinfo` is not available, which is already the
case for the CMake build. This affects e.g. classic MinGW because it
still targets Windows 2000 by default, where `getaddrinfo` is not
available, but general IPv6 support is.
Instead of checking for `getaddrinfo`, check for `sockaddr_in6` as the
CMake build does.
Closes https://github.com/curl/curl/pull/4662
|
|
Also, use `CURLRES_IPV6` only for actual DNS resolution, not for IPv6
address support. This makes it possible to connect to IPv6 literals by
setting `ENABLE_IPV6` even without `getaddrinfo` support. It also fixes
the CMake build when using the synchronous resolver without
`getaddrinfo` support.
Closes https://github.com/curl/curl/pull/4662
|
|
To match travis and give more info on failures.
|
|
Closes #4655
|
|
Have intermediate certificates in the trust store be treated as
trust-anchors, in the same way as self-signed root CA certificates
are. This allows users to verify servers using the intermediate cert
only, instead of needing the whole chain.
Other TLS backends already accept partial chains.
Reported-by: Jeffrey Walton
Bug: https://curl.haxx.se/mail/lib-2019-11/0094.html
|
|
Reported-by: Vlastimil Ovčáčík
Fixes #4644
Closes #4665
|
|
Reported-by: Jeff Mears
Bug: https://curl.haxx.se/mail/lib-2019-12/0007.html
Closes #4667
|
|
Fixes the macOS builds where OVERRIDE_CC and OVERRIDE_CXX are not set.
Reported-by: Jay Satiro
Fixes #4659
Closes #4661
Closes #4664
|
|
|
|
[skip ci]
|
|
|
|
Follow-up to 9c1806ae
|
|
- Disable warning C4127 "conditional expression is constant" globally
in curl_setup.h for when building with Microsoft's compiler.
This mainly affects building with the Visual Studio project files found
in the projects dir.
Prior to this change the cmake and winbuild build systems already
disabled 4127 globally for when building with Microsoft's compiler.
Also, 4127 was already disabled for all build systems in the limited
circumstance of the WHILE_FALSE macro which disabled the warning
specifically for while(0). This commit removes the WHILE_FALSE macro and
all other cruft in favor of disabling globally in curl_setup.
Background:
We have various macros that cause 0 or 1 to be evaluated, which would
cause warning C4127 in Visual Studio. For example this causes it:
#define Curl_resolver_asynch() 1
Full behavior is not clearly defined and inconsistent across versions.
However it is documented that since VS 2015 Update 3 Microsoft has
addressed this somewhat but not entirely, not warning on while(true) for
example.
Prior to this change some C4127 warnings occurred when I built with
Visual Studio using the generated projects in the projects dir.
Closes https://github.com/curl/curl/pull/4658
|
|
- Retrieve LibreSSL runtime version when supported (>= 2.7.1).
For earlier versions we continue to use the compile-time version.
Ref: https://man.openbsd.org/OPENSSL_VERSION_NUMBER.3
Closes https://github.com/curl/curl/pull/2425
|
|
- In all code call Curl_winapi_strerror instead of Curl_strerror when
the error code is known to be from Windows GetLastError.
Curl_strerror prefers CRT error codes (errno) over Windows API error
codes (GetLastError) when the two overlap. When we know the error code
is from GetLastError it is more accurate to prefer the Windows API error
messages.
Reported-by: Richard Alcock
Fixes https://github.com/curl/curl/issues/4550
Closes https://github.com/curl/curl/pull/4581
|
|
... so that failures in the global init function don't count as a
working init and it can then be called again.
Reported-by: Paul Groke
Fixes #4636
Closes #4653
|
|
... and use internally. This function will return TIME_T_MAX instead of
failure if the parsed data is found to be larger than what can be
represented. TIME_T_MAX being the largest value curl can represent.
Reviewed-by: Daniel Gustafsson
Reported-by: JanB on github
Fixes #4152
Closes #4651
|