aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2009-01-01- 'reconf' is removed since we rather have users use 'buildconf'Daniel Stenberg
2008-12-31credit BasDaniel Stenberg
2008-12-31- Bas Mevissen reported http://curl.haxx.se/bug/view.cgi?id=2479030 pointingDaniel Stenberg
out that 'reconf' didn't properly point out the m4 subdirectory when running aclocal.
2008-12-30sync'd address with other tests.Gunter Knauf
2008-12-30trial with an address which has a valid domain part but invalid host to ↵Gunter Knauf
avoid dns redirections.
2008-12-30added HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID to ares Makefile.netware and sync'd ↵Gunter Knauf
with other Makefile.netware.
2008-12-30changed HAVE_SIN6_SCOPE_ID define to HAVE_SOCKADDR_IN6_SIN6_SCOPE_ID since ↵Gunter Knauf
just found that ares already uses this define.
2008-12-30added HAVE_SIN6_SCOPE_ID define to all non-configure platforms which seem to ↵Gunter Knauf
be IPv6-aware.
2008-12-29 - Phil Lisiecki filed bug report #2413067Daniel Stenberg
(http://curl.haxx.se/bug/view.cgi?id=2413067) that identified a problem that would cause libcurl to mark a DNS cache entry "in use" eternally if the subsequence TCP connect failed. It would thus never get pruned and refreshed as it should've been.
2008-12-29further clarifcation based on input from Anthony BryanDaniel Stenberg
2008-12-28- Peter Korsgaard fixed building libcurl with "configure --with-sslDaniel Stenberg
--disable-verbose".
2008-12-28Anthony Bryan's man page cleanup in language and spellingDaniel Stenberg
2008-12-28Anthony Bryan reported quirks, I updatedDaniel Stenberg
2008-12-28Anthony Bryan reported and I corrected two typos.Daniel Stenberg
2008-12-28The CURLOPT_KRBLEVEL description wasn't properly formatted and thus wasDaniel Stenberg
corrupted in ouputs. Another report from Anthony Bryan.
2008-12-28Anthony Bryan reported this outputs wrong in the PDF and I've now tried toDaniel Stenberg
escape these letters what I think is the correct way.
2008-12-28silent 'unused' warnings.Gunter Knauf
2008-12-27libssh2 0.19 became 1.0 insteadDaniel Stenberg
2008-12-27added check for sin6_scope_id member in struct sockaddr_in6.Gunter Knauf
2008-12-25193 removed, no work has been started on this and I personally don't care thatDaniel Stenberg
much about it
2008-12-22Remove trailing #undef value. Typo?Gisle Vanem
2008-12-22libssh2_sftp_seek2 was just renamed to libssh2_sftp_seek64 ...Daniel Stenberg
2008-12-22- Given a recent enough libssh2, libcurl can now seek/resume with SFTP evenDaniel Stenberg
on file indexes beyond 2 or 4GB.
2008-12-22- Anthony Bryan provided a set of patches that cleaned up manual language,Daniel Stenberg
corrected spellings and more.
2008-12-20malloc+memset => callocDaniel Stenberg
2008-12-20same procedure, simpler codeDaniel Stenberg
2008-12-20197 - IIS-bug in DigestDaniel Stenberg
The curl tool parts are postponed to a later time 201 - "bug: header data output to the body callback function after set header" Was probably not a bug, I asked about it but I didn't get any response. 202 - "hangs up of application above libcurl" - problems with the multi_socket Fixes from Igor have been committed and there's currently no pending ones.
2008-12-20- Igor Novoseltsev fixed a bad situation for the multi_socket() API when doingDaniel Stenberg
pipelining, as libcurl could then easily get confused and A) work on the handle that was not "first in queue" on a pipeline, or even B) tell the app to REMOVE a socket while it was in use by a second handle in a pipeline. Both errors caused hanging or stalling applications.
2008-12-20make the debug/helper function output to stderr as that makes it play nicerDaniel Stenberg
in combination with infof() calls
2008-12-20remove outdated stuffDaniel Stenberg
2008-12-19- curl_multi_timeout() could return a timeout value of 0 even though nothingDaniel Stenberg
was actually ready to get done, as the internal time resolution is higher than the returned millisecond timer. Therefore it could cause applications running on fast processors to do short bursts of busy-loops. curl_multi_timeout() will now only return 0 if the timeout is actually alreay triggered.
2008-12-19oops, removing debug output that wasn't supposed to be thereDaniel Stenberg
2008-12-19- Using the libssh2 0.19 function libssh2_session_block_directions(), libcurlDaniel Stenberg
now has an improved ability to do right when the multi interface (both "regular" and multi_socket) is used for SCP and SFTP transfers. This should result in (much) less busy-loop situations and thus less CPU usage with no speed loss.
2008-12-19expand the CURLOPT_POSTREDIR explanationDaniel Stenberg
2008-12-17- SCP and SFTP with the multi interface had the same flaw: the 'DONE'Daniel Stenberg
operation didn't complete properly if the EAGAIN equivalent was returned but libcurl would simply continue with a half-completed close operation performed. This ruined persistent connection re-use and cause some SSH-protocol errors in general. The correction is unfortunately adding a blocking function - doing it entirely non-blocking should be considered for a better fix.
2008-12-16Updated dependencies based on "gcc -MM".Gisle Vanem
2008-12-16Added the use of Watt-32 tcp/ip stack for Win32 target.Gisle Vanem
If USE_WATT32=1 one needs to use stack-based calls (-3s). So to keep the makefile nice and clean, specify -3s for Winsock target too (there's hardly any speed-gain using -3r).
2008-12-16Added the use of Watt-32 tcp/ip stack for Win32 targets.Gisle Vanem
2008-12-16Added the use of Watt-32 tcp/ip stack for Win32 targets.Gisle Vanem
Added USE_WATT32 unconditionally for MSDOS targets since it's the only option. Adjusted the text for '--wdebug'.
2008-12-16Added the use of Watt-32 tcp/ip stack for Win32 targets.Gisle Vanem
2008-12-15- libssh2_sftp_last_error() was wrongly used at some places in libcurl whichDaniel Stenberg
made libcurl sometimes not properly abort problematic SFTP transfers.
2008-12-12196 is goneDaniel Stenberg
2008-12-12- More work with Igor Novoseltsev to first fix the remaining stuff forDaniel Stenberg
removing easy handles from multi handles when the easy handle is/was within a HTTP pipeline. His bug report #2351653 (http://curl.haxx.se/bug/view.cgi?id=2351653) was also related and was eventually fixed by a patch by Igor himself.
2008-12-12Make the getoff all pipelines function only set _inuse to FALSE if theDaniel Stenberg
specified data pointer was head.
2008-12-12credit Mark Karpeles for his report and workDaniel Stenberg
2008-12-12Patrick Monnerat fixed a build regression, introduced in 7.19.2, affectingYang Tse
OS/400 compilations with IPv6 enabled.
2008-12-11Removed 200 as it wasn't a bug after allDaniel Stenberg
Added 203 "dns cache memory leak and TTL failure after failed conn"
2008-12-11- Bug report #2416182 titled "crash in ConnectionExists when usingDaniel Stenberg
duphandle+curl_mutli" (http://curl.haxx.se/bug/view.cgi?id=2416182) showed that curl_easy_duphandle() wrongly also copied the pointer to the connection cache, which was plain wrong and caused a segfault if the handle would be used in a different multi handle than the handle it was duplicated from.
2008-12-11Dan F pointed out that we don't need to scan IPv6 addresses for '%'-lettersDaniel Stenberg
in the parse_remote_port() function as the scope id has already been stripped from the string.
2008-12-11- Keshav Krity found out that libcurl failed to deal with dotted IPv6Daniel Stenberg
addresses if they were very long (>39 letters) due to a too strict address validity parser. It now accepts addresses up to 45 bytes long.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-23 00:26:59 +0000