aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-11-06build: fix for CURL_DISABLE_DOHWyatt O'Day
Fixes https://github.com/curl/curl/issues/4565 Closes https://github.com/curl/curl/pull/4566
2019-11-06configure: avoid unportable `==' test(1) operatorLeonardo Taccari
Closes https://github.com/curl/curl/pull/4567
2019-11-05RELEASE-NOTES: syncedDaniel Stenberg
The 7.67.0 release
2019-11-05THANKS: add new names from 7.67.0Daniel Stenberg
2019-11-05configure: only say ipv6 enabled when the variable is setDaniel Stenberg
Previously it could say "IPv6: enabled" at the end of the configure run but the define wasn't set because of a missing getaddrinfo(). Reported-by: Marcel Raad Fixes #4555 Closes #4560
2019-11-02certs/Server-localhost-lastSAN-sv: regenerate with sha256Marcel Raad
All other certificates were regenerated in commit ba782baac30, but this one was missed. Fixes test3001 on modern systems. Closes https://github.com/curl/curl/pull/4551
2019-11-02copyrights: update all copyright notices to 2019 on files changed this yearVilhelm Prytz
Closes #4547
2019-11-02mbedtls: add error message for cert validity starting in the futureBastien Bouclet
Closes #4552
2019-11-01schannel_verify: Fix concurrent openings of CA fileJay Satiro
- Open the CA file using FILE_SHARE_READ mode so that others can read from it as well. Prior to this change our schannel code opened the CA file without sharing which meant concurrent openings (eg an attempt from another thread or process) would fail during the time it was open without sharing, which in curl's case would cause error: "schannel: failed to open CA file". Bug: https://curl.haxx.se/mail/lib-2019-10/0104.html Reported-by: Richard Alcock
2019-10-31gtls: make gnutls_bye() not wait for response on shutdownDaniel Stenberg
... as it can make it wait there for a long time for no good purpose. Patched-by: Jay Satiro Reported-by: Bylon2 on github Adviced-by: Nikos Mavrogiannopoulos Fixes #4487 Closes #4541
2019-10-30appveyor: publish artifacts on appveyorMichał Janiszewski
This allows obtaining upstream builds of curl directly from appveyor for all the available configurations Closes #4509
2019-10-30url: make Curl_close() NULLify the pointer tooDaniel Stenberg
This is the common pattern used in the code and by a unified approach we avoid mistakes. Closes #4534
2019-10-29INSTALL: add missing space for configure commandsTrivikram Kamat
Closes #4539
2019-10-29url: Curl_free_request_state() should also free doh handlesDaniel Stenberg
... or risk DoH memory leaks. Reported-by: Paul Dreik Fixes #4463 Closes #4527
2019-10-29examples: remove the "this exact code has not been verified"Daniel Stenberg
... as really confuses the reader to not know what to believe!
2019-10-29HTTP3: fix typo somehere1 > somewhere1Trivikram Kamat
Closes #4535
2019-10-28HTTP3: fix invalid use of sendto for connected UDP socketJavier Blazquez
On macOS/BSD, trying to call sendto on a connected UDP socket fails with a EISCONN error. Because the singleipconnect has already called connect on the socket when we're trying to use it for QUIC transfers we need to use plain send instead. Fixes #4529 Closes https://github.com/curl/curl/pull/4533
2019-10-28RELEASE-NOTES: syncedDaniel Stenberg
2019-10-28HTTP3: fix Windows buildJavier Blazquez
The ngtcp2 QUIC backend was using the MSG_DONTWAIT flag for send/recv in order to perform nonblocking operations. On Windows this flag does not exist. Instead, the socket must be set to nonblocking mode via ioctlsocket. This change sets the nonblocking flag on UDP sockets used for QUIC on all platforms so the use of MSG_DONTWAIT is not needed. Fixes #4531 Closes #4532
2019-10-27appveyor: add --disable-proxy autotools buildMarcel Raad
This would have caught issue #3926. Also make formatting more consistent. Closes https://github.com/curl/curl/pull/4526
2019-10-25appveyor: make winbuilds with DEBUG=no/yes and VS 2015/2017Daniel Stenberg
... and invoke "curl -V" once done Co-Authored-By: Jay Satiro Closes #4523
2019-10-24schannel: reverse the order of certinfo insertionsFrancois Rivard
Fixes #4518 Closes #4519
2019-10-24test1591: fix spelling of http featureMarcel Raad
The test never got run because the feature name is `http` in lowercase. Closes https://github.com/curl/curl/pull/4520
2019-10-23appveyor: Use two parallel compilation on appveyor with CMakeMichał Janiszewski
Appveyor provides 2 CPUs for each builder[1], make sure to use parallel compilation, when running with CMake. CMake learned this new option in version 3.12[2] and the version provided by appveyor is fresh enough. Curl doesn't really take that long to build and it is using the slowest builder available, msbuild, so expect only a moderate improvement in build times. [1] https://www.appveyor.com/docs/build-environment/ [2] https://cmake.org/cmake/help/v3.12/release/3.12.html Closes #4508
2019-10-23conn-reuse: requests wanting NTLM can reuse non-NTLM connectionsDaniel Stenberg
Added test case 338 to verify. Reported-by: Daniel Silverstone Fixes #4499 Closes #4514
2019-10-23tests: add missing proxy featuresMarcel Raad
2019-10-22RELEASE-NOTES: syncedDaniel Stenberg
2019-10-21tests: use %FILE_PWD for file:// URLsMarcel Raad
This way, we always have exactly one slash after the host name, making the tests pass when curl is compiled with the MSYS GCC. Closes https://github.com/curl/curl/pull/4512
2019-10-21tests: add `connect to non-listen` keywordsMarcel Raad
These tests try to connect to ports nothing is listening on. Closes https://github.com/curl/curl/pull/4511
2019-10-20runtests: get textaware info from curl instead of perlMarcel Raad
The MSYS system on Windows can run the test suite for curl built with any toolset. When built with the MSYS GCC, curl uses Unix line endings, while it uses Windows line endings when built with the MinGW GCC, and `^O` reports 'msys' in both cases. Use the curl executable itself to determine the line endings instead, which reports 'x86_64-pc-msys' when built with the MSYS GCC. Closes https://github.com/curl/curl/pull/4506
2019-10-20appveyor: Add MSVC ARM64 buildMichał Janiszewski
Closes #4507
2019-10-18http2_recv: a closed stream trumps pause stateDaniel Stenberg
... and thus should return 0, not EAGAIN. Reported-by: Tom van der Woerdt Fixes #4496 Closes #4505
2019-10-18http2: expire a timeout at end of streamDaniel Stenberg
To make sure that transfer is being dealt with. Streams without Content-Length need a final read to notice the end-of-stream state. Reported-by: Tom van der Woerdt Fixes #4496
2019-10-18travis: Add an ARM64 buildDan Fandrich
Test 323 is failing for some reason, so disable it there for now.
2019-10-18examples/sslbackend: fix -Wchar-subscripts warningMarcel Raad
With the `isdigit` implementation that comes with MSYS2, the argument is used as an array subscript, resulting in a -Wchar-subscripts warning. `isdigit`'s behavior is undefined if the argument is negative and not EOF [0]. As done in lib/curl_ctype.h, cast the `char` variable to `unsigned char` to avoid that. [0] https://en.cppreference.com/w/c/string/byte/isdigit Closes https://github.com/curl/curl/pull/4503
2019-10-18configure: remove all cyassl referencesDaniel Stenberg
In particular, this removes the case where configure would find an old cyall installation rather than a wolfssl one if present. The library is named wolfssl in modern days so there's no real need to keep support for the former. Reported-by: Jacob Barthelmeh Closes #4502
2019-10-17test1162: disable MSYS2's POSIX path conversionMarcel Raad
This avoids MSYS2 converting the backslasb in the URL to a slash, causing the test to fail.
2019-10-17RELEASE-NOTES: syncedDaniel Stenberg
2019-10-16CURLOPT_TIMEOUT.3: Clarify transfer timeout time includes queue timeJay Satiro
Prior to this change some users did not understand that the "request" starts when the handle is added to the multi handle, or probably they did not understand that some of those transfers may be queued and that time is included in timeout. Reported-by: Jeroen Ooms Fixes https://github.com/curl/curl/issues/4486 Closes https://github.com/curl/curl/pull/4489
2019-10-16tool_operate: Fix retry sleep time shown to user when Retry-AfterStian Soiland-Reyes
- If server header Retry-After is being used for retry sleep time then show that value to the user instead of the normal retry sleep time. This is a follow-up to 640b973 (7.66.0) which changed curl tool so that the value from Retry-After header overrides other retry timing options. Closes https://github.com/curl/curl/pull/4498
2019-10-16url: normalize CURLINFO_EFFECTIVE_URLDaniel Stenberg
The URL extracted with CURLINFO_EFFECTIVE_URL was returned as given as input in most cases, which made it not get a scheme prefixed like before if the URL was given without one, and it didn't remove dotdot sequences etc. Added test case 1907 to verify that this now works as intended and as before 7.62.0. Regression introduced in 7.62.0 Reported-by: Christophe Dervieux Fixes #4491 Closes #4493
2019-10-16tests: line ending fixes for WindowsMarcel Raad
Mark some files as text. Closes https://github.com/curl/curl/pull/4490
2019-10-15tests: use proxy featureMarcel Raad
This makes the tests succeed when using --disable-proxy. Closes https://github.com/curl/curl/pull/4488
2019-10-13smbserver: fix Python 3 compatibilityMarcel Raad
Python 2's `ConfigParser` module is spelled `configparser` in Python 3. Closes https://github.com/curl/curl/pull/4484
2019-10-13security: silence conversion warningMarcel Raad
With MinGW-w64, `curl_socket_t` is is a 32 or 64 bit unsigned integer, while `read` expects a 32 bit signed integer. Use `sread` instead of `read` to use the correct parameter type. Closes https://github.com/curl/curl/pull/4483
2019-10-13connect: silence sign-compare warningMarcel Raad
With MinGW-w64 using WinSock, `curl_socklen_t` is signed, while the result of `sizeof` is unsigned. Closes https://github.com/curl/curl/pull/4483
2019-10-13TODO: Handle growing SFTP filesDaniel Stenberg
Closes #4344
2019-10-13KNOWN_BUGS: remove "CURLFORM_CONTENTLEN in an array"Daniel Stenberg
The curl_formadd() function is deprecated and shouldn't be used so the real fix for applications is to switch to the curl_mime_* API.
2019-10-12KNOWN_BUGS: "LDAP on Windows does authentication wrong"Daniel Stenberg
Closes #3116
2019-10-12appveyor: add a winbuild that uses VS2017Daniel Stenberg
Closes #4482