aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2013-02-27smtp: Re-factored the final SMTP_AUTH constantSteve Holme
Changed the final SMTP_AUTH constant to SMTP_AUTH_FINAL for consistency with the response function.
2013-02-27pop3: Re-factored the final POP3_AUTH constantSteve Holme
Changed the final POP3_AUTH constant to POP3_AUTH_FINAL for consistency with the response function.
2013-02-27imap: Re-factored final IMAP_AUTHENTICATE constantSteve Holme
Changed the final IMAP_AUTHENTICATE constant to IMAP_AUTHENTICATE_FINAL for consistency with the response function.
2013-02-27imap: Updated the coding style of imap_state_servergreet_resp()Steve Holme
Updated the coding style, in this function, to be consistant with other response functions rather then performing a hard return on failure.
2013-02-27imap: Reversed the logic of the (un)successful tagged SELECT responseSteve Holme
Reversed the logic of the unsuccessful vs successful tagged SELECT response in imap_state_select_resp() to be more logical to read.
2013-02-27imap: Reversed the logic of the (un)successful tagged CAPABILITY responseSteve Holme
Reversed the logic of the unsuccessful vs successful tagged CAPABILITY response in imap_state_capability_resp() to be more logical to read.
2013-02-27imap: Corrected char* references with char *Steve Holme
Corrected char* references made in commit: 709b3506cd9b.
2013-02-27imap: Added processing of more than one response when sent in same packetJiri Hruska
Added a loop to imap_statemach_act() in which Curl_pp_readresp() is called until the cache is drained. Without this multiple responses received in a single packet could result in a hang or delay.
2013-02-27imap: Added skipping of SELECT command if already in the same mailboxJiri Hruska
Added storage and checking of the last mailbox userd to prevent unnecessary switching.
2013-02-27imap: Introduced the mailbox variableJiri Hruska
Added the mailbox variable to the per-connection structure in preparation for checking for an already selected mailbox.
2013-02-26email: Slight reordering of connection based variablesSteve Holme
Reordered the state and ssl_done variables in order to provide more consistency between the email protocols as well as for for an upcoming change.
2013-02-26imap: Tidied up comments for connection based variablesSteve Holme
2013-02-26DOCS: Added the IMAP UIDVALIDITY property to the CURLOPT_URL sectionSteve Holme
2013-02-26imap: Added verification of UIDVALIDITY mailbox attributeJiri Hruska
Added support for checking the UIDVALIDITY, and aborting the request, if it has been specified in the URL and the server response is different.
2013-02-26imap: Added support for parsing the UIDVALIDITY propertyJiri Hruska
Added support for parsing the UIDVALIDITY property from the SELECT response and storing it in the per-connection structure.
2013-02-26imap: Introduced the mailbox_uidvalidity variableJiri Hruska
Added the mailbox_uidvalidity variable to the per-connection structure in preparation for checking the UIDVALIDITY mailbox attribute.
2013-02-26imap: Corrected comment in imap_endofresp()Steve Holme
2013-02-26imap: Corrected whitespaceSteve Holme
2013-02-26imap: Added filtering of CAPABILITY and FETCH untagged responsesJiri Hruska
Only responses that contain "CAPABILITY" and "FETCH", respectively, will be sent to their response handler.
2013-02-26imap: Added a helper function for upcoming untagged response filteringJiri Hruska
RFC 3501 states that "the client MUST be prepared to accept any response at all times" yet we assume anything received with "* " at the beginning is the untagged response we want. Introduced a helper function that checks whether the input looks like a response to specified command, so that we may filter the ones we are interested in according to the current state.
2013-02-26imap: Moved CAPABILITY response handling to imap_state_capability_resp()Jiri Hruska
Introduced similar handling to the FETCH responses, where even the untagged data responses are handled by the response handler of the individual state.
2013-02-26Remove unused variable in smtp_state_data_resp()Linus Nielsen Feltzing
2013-02-25email: Small tidy up following recent changesSteve Holme
2013-02-25smtp: Removed bytecountp from the per-request structureSteve Holme
Removed this pointer to a downloaded bytes counter because it was set in smtp_init() to point to the same variable the transfer functions keep the count in (k->bytecount), effectively making the code in transfer.c "*k->bytecountp = k->bytecount" a no-op.
2013-02-25pop3: Removed bytecountp from the per-request structureSteve Holme
Removed this pointer to a downloaded bytes counter because it was set in pop3_init() to point to the same variable the transfer functions keep the count in (k->bytecount), effectively making the code in transfer.c "*k->bytecountp = k->bytecount" a no-op.
2013-02-25imap: Removed bytecountp from the per-request structureJiri Hruska
Removed this pointer to a downloaded bytes counter because it was set in imap_init() to point to the same variable the transfer functions keep the count in (k->bytecount), effectively making the code in transfer.c "*k->bytecountp = k->bytecount" a no-op.
2013-02-25imap: Adjusted SELECT and FETCH function orderJiri Hruska
Moved imap_select() and imap_fetch() to be grouped with the other perform functions.
2013-02-25imap: Adjusted SELECT and FETCH state order in imap_statemach_act()Jiri Hruska
Exchanged the position of these states in the switch statements to match the state enum, execution and function order.
2013-02-25imap: Minor tidy up of comments in imap_parse_url_path()Steve Holme
Tidy up of comments before next round of imap changes.
2013-02-25imap: Fixed incorrect comparison for STARTTLS in imap_endofresp()Steve Holme
Corrected the comparison type in addition to commit 1dac29fa83a9.
2013-02-25DOCS: Corrected IMAP URL examples according to RFC5092Steve Holme
URL examples that included the UID weren't technically correct although would pass the curl parser.
2013-02-24darwinssl: fix undefined $ssllib warning in runtests.plNick Zitzmann
I also added --with-darwinssl to the list of SSL options in configure.
2013-02-24imap: Added check for new internal imap response codeSteve Holme
2013-02-24imap: Changed the order of the response types in imap_endofresp()Steve Holme
From a maintenance point of view the code reads better to view tagged responses, then untagged followed by continuation responses. Additionally, this matches the order of responses in POP3.
2013-02-24imap: Added stricter parsing of continuation responsesJiri Hruska
Enhanced the parsing to only allow continuation responses in some states.
2013-02-24imap: Simplified memcmp() in tagged response parsingSteve Holme
2013-02-24imap: Reworked the logic of untagged command responsesJiri Hruska
2013-02-24imap: Corrected spacing of trailing braceSteve Holme
2013-02-24imap: Added stricter parsing of tagged command responsesJiri Hruska
Enhanced the parsing of tagged responses which must start with "OK", "NO" or "BAD"
2013-02-24imap: Simplified command response test in imap_endofresp()Jiri Hruska
2013-02-24imap: Corrected comment in imap_endofresp()Jiri Hruska
2013-02-24DOCS: Corrected layout of POP3 and IMAP URL examplesSteve Holme
Corrected layout issues with the POP3 and IMAP URL examples introduced in commit cb3ae6894fb2.
2013-02-23DOCS: Updated CURLOPT_URL section following recent POP3 and IMAP changesSteve Holme
Updated the POP3 sub-section to refer to message ID rather than mailbox. Added an IMAP sub-section with example URLs depicting the specification of mailbox, uid and section.
2013-02-23pop3: Refactored the mailbox variable as it didn't reflect it's purposeSteve Holme
Updated the mailbox variable to correctly reflect it's purpose. The name mailbox was a leftover from when IMAP and POP3 support was initially added to curl.
2013-02-23FEATURES: Updated following recent IMAP changesSteve Holme
2013-02-23imap: Added the ability to FETCH a specific UID and SECTIONJiri Hruska
Updated the FETCH command to send the UID and SECTION parsed from the URL. By default the BODY specifier doesn't include a section, BODY[] is now sent whereas BODY[TEXT] was previously sent. In my opinion retrieving just the message text is rarely useful when dealing with emails, as the headers are required for example, so that functionality is not retained. In can however be simulated by adding SECTION=TEXT to the URL. Also updated test801 and test1321 due to the BODY change.
2013-02-23email: Additional tidy up of comments following recent changesSteve Holme
2013-02-23smtp: Removed some FTP heritage leftoversSteve Holme
Removed user and passwd from the SMTP struct as these cannot be set on a per-request basis and are leftover from legacy FTP code. Changed some comments still using FTP terminology.
2013-02-23smtp: Moved the per-request variables to the per-request data structureSteve Holme
Moved the rcpt variable from the per-connection struct smtp_conn to the new per-request struct and fixed references accordingly.
2013-02-23pop3: Introduced a custom SMTP structure for per-request dataSteve Holme
Created a new SMTP structure and changed the type of the smtp proto variable in connectdata from FTP* to SMTP*.