aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2019-06-22typecheck: add 3 missing strings and a callback data pointerDaniel Stenberg
Closes #4050
2019-06-21tests: add disable-scan.pl to distDaniel Stenberg
follow-up from 29177f422a5 Closes #4059
2019-06-21http2: don't call stream-close on already closed streamsDaniel Stenberg
Closes #4055
2019-06-20travis: enable alt-svc for coverage buildMarcel Raad
Closes
2019-06-20travis: enable libssh2 for coverage buildMarcel Raad
It was enabled by default before commit c92d2e14cfb. Disable torture tests 600 and 601 because of https://github.com/curl/curl/issues/1678. Closes
2019-06-20travis: disable threaded resolver for coverage buildMarcel Raad
This enables more tests. Closes
2019-06-20travis: enable brotli for all xenial jobsMarcel Raad
There's no need for a separate job, and no need to build it from source with Xenial. Closes
2019-06-20travis: enable warnings-as-errors for coverage buildMarcel Raad
Closes
2019-06-20system_win32: fix typoGisle Vanem
2019-06-20typecheck: CURLOPT_CONNECT_TO takes an slist tooDaniel Stenberg
Additionally, add an alias in curl.h for slist-using options so that we can grep/parse those out at will. Closes #4042
2019-06-20tests: support non-localhost HOSTIP for dict/smb serversStephan Szabo
smbserver.py/dictserver.py were explicitly using localhost/127.0.0.1 for binding the server which when we were running the tests with a separate HOSTIP and CLIENTIP had failures verifying the server from the device we were testing. This changes them to take the address from runtests.py and default to localhost/127.0.0.1 if none is given. Closes #4048
2019-06-18test1523: basic test of CURLOPT_LOW_SPEED_LIMITDaniel Stenberg
2019-06-18configure: --disable-progress-meterDaniel Stenberg
Builds libcurl without support for the built-in progress meter. Closes #4023
2019-06-18curl: improved skip-setopt-options when built with disabled featuresDaniel Stenberg
Reduces #ifdefs in src/tool_operate.c Follow-up from 4e86f2fc4e6 Closes #3936
2019-06-18netrc: Return the correct error code when out of memorySteve Holme
Introduced in 763c5178. Closes #4036
2019-06-18config-os400: add getpeername and getsockname definesDaniel Stenberg
Reported-by: jonrumsey on github Fixes #4037 Closes #4039
2019-06-18runtests: keep logfiles around by defaultDaniel Stenberg
Make '-k' a no-op. The singletest function now clears the log directory BEFORE each individual test and not after, which makes it possible to always keep the logfiles around after a test has been run. No need to specify -k anymore. Keeping the option parsing around to work with users of old habits. Some tests also didn't work properly when -k was used (since the old logs would be kep when a new test starts) which this change also fixes. Closes #4035
2019-06-18openssl: fix pubkey/signature algorithm detection in certinfoGergely Nagy
Certinfo gives the same result for all OpenSSL versions. Also made printing RSA pubkeys consistent with older versions. Reported-by: Michael Wallner Fixes #3706 Closes #4030
2019-06-17conn_maxage: move the check to prune_dead_connections()Daniel Stenberg
... and avoid the locking issue. Reported-by: Kunal Ekawde Fixes #4029 Closes #4032
2019-06-17tests: have runtests figure out disabled featuresDaniel Stenberg
... so that runtests can skip individual test cases that test features that are explicitly disabled in this build. This new logic is intended for disabled features that aren't otherwise easily visible through the curl_version_info() or other API calls. tests/server/disabled is a newly built executable that will output a list of disabled features. Outputs nothing for a default build. Closes #3950
2019-06-17test188/189: fix Content-LengthDaniel Stenberg
This cures the flaky test results Closes #4034
2019-06-17winbuild: use WITH_PREFIX if givenThomas Gamper
Closes #4031
2019-06-17openssl: remove outdated commentDaniel Gustafsson
OpenSSL used to call exit(1) on syntax errors in OPENSSL_config(), which is why we switched to CONF_modules_load_file() and introduced a comment stating why. This behavior was however changed in OpenSSL commit abdd677125f3a9e3082f8c5692203590fdb9b860, so remove the now outdated and incorrect comment. The mentioned commit also declares OPENSSL_config() deprecated so keep the current coding. Closes #4033 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-06-16RELEASE-NOTES: syncedDaniel Stenberg
2019-06-16os400: make vsetopt() non-static as Curl_vsetopt() for os400 support.Patrick Monnerat
Use it in curl_easy_setopt_ccsid(). Reported-by: jonrumsey on github Fixes #3833 Closes #4028
2019-06-15runtests: report single test time + total durationDaniel Stenberg
... after each successful test. Closes #4027
2019-06-14multi: fix the transfer hash functionDaniel Stenberg
Follow-up from 8b987cc7eb Reported-by: Tom van der Woerdt Fixes #4018 Closes #4024
2019-06-13unit1654: cleanup on memory failureDaniel Stenberg
... to make it handle torture tests properly. Reported-by: Marcel Raad Fixes #4021 Closes #4022
2019-06-13krb5: fix compiler warningMarcel Raad
Even though the variable was used in a DEBUGASSERT, GCC 8 warned in debug mode: krb5.c:324:17: error: unused variable 'maj' [-Werror=unused-variable] Just suppress the warning and declare the variable unconditionally instead of only for DEBUGBUILD (which also missed the check for HAVE_ASSERT_H). Closes https://github.com/curl/curl/pull/4020
2019-06-13quote.d: asterisk prefix works for SFTP as wellDaniel Stenberg
Reported-by: Ben Voris Fixes #4017 Closes #4019
2019-06-12multi: fix the transfer hashes in the socket hash entriesDaniel Stenberg
- The transfer hashes weren't using the correct keys so removing entries failed. - Simplified the iteration logic over transfers sharing the same socket and they now simply are set to expire and thus get handled in the "regular" timer loop instead. Reported-by: Tom van der Woerdt Fixes #4012 Closes #4014
2019-06-12url: Fix CURLOPT_MAXAGE_CONN time comparisonCliff Crosland
Old connections are meant to expire from the connection cache after CURLOPT_MAXAGE_CONN seconds. However, they actually expire after 1000x that value. This occurs because a time value measured in milliseconds is accidentally divided by 1M instead of by 1,000. Closes https://github.com/curl/curl/pull/4013
2019-06-11test1165: verify that CURL_DISABLE_ symbols are in syncDaniel Stenberg
between configure.ac and source code. They should be possible to switch on/off in configure AND be used in source code.
2019-06-11configure: remove CURL_DISABLE_TLS_SRPDaniel Stenberg
It isn't used by code so stop providing the define. Closes #4010
2019-06-11Revert "cmake: add SMB to list of disabled protocols if HTTP_ONLY is specified"Daniel Stenberg
This reverts commit 36738caeb78603ce24e3ea089a167b8c216fb938. Apparently several of the appveyor windows builds broke.
2019-06-11cmake: add SMB to list of disabled protocols if HTTP_ONLY is specifiedsergey-raevskiy
Reviewed-by: Jakub Zakrzewski Closes #3770
2019-06-11RELEASE-NOTES: syncedDaniel Stenberg
2019-06-11http2: remove CURL_DISABLE_TYPECHECK defineDaniel Stenberg
... in http2-less builds as it served no use.
2019-06-11configure: more --disable switches to toggle off individual featuresDaniel Stenberg
... actual support in the code for disabling these has already landed. Closes #4009
2019-06-11wolfssl: fix key pinning build errorDaniel Stenberg
follow-up from deb9462ff2de8
2019-06-10CURLMOPT_SOCKETFUNCTION.3: clarifiedDaniel Stenberg
Moved away the callback explanation from curl_multi_socket_action.3 and expanded it somewhat. Closes #4006
2019-06-10wolfssl: fixup for SNI useDaniel Stenberg
follow-up from deb9462ff2de8 Closes #4007
2019-06-10CURLOPT_CAINFO.3: polished wordingDaniel Stenberg
Clarify the functionality when built to use Schannel and Secure Transport and stop calling it the "recommended" or "preferred" way and instead rather call it the default. Removed the reference to the ssl comparison table as it isn't necessary. Reported-by: Richard Alcock Bug: https://curl.haxx.se/mail/lib-2019-06/0019.html Closes #4005
2019-06-10SECURITY.md: createdDaniel Stenberg
Brief security policy description for use/display on github.
2019-06-10tool_cb_prg: Fix integer overflow in progress barDaniel Gustafsson
Commit 61faa0b420c236480bc9ef6fd52b4ecc1e0f8d17 fixed the progress bar width calculation to avoid integer overflow, but failed to account for the fact that initial_size is initialized to -1 when the file size is retrieved from the remote on an upload, causing another signed integer overflow. Fix by separately checking for this case before the width calculation. Closes #3984 Reported-by: Brian Carpenter (Geeknik Labs) Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2019-06-10wolfssl: refer to it as wolfSSL onlyDaniel Stenberg
Remove support for, references to and use of "cyaSSL" from the source and docs. wolfSSL is the current name and there's no point in keeping references to ancient history. Assisted-by: Daniel Gustafsson Closes #3903
2019-06-10RELEASE-NOTES: syncedDaniel Stenberg
2019-06-10bindlocal: detect and avoid IP version mismatches in bind()Daniel Stenberg
Reported-by: Alex Grebenschikov Fixes #3993 Closes #4002
2019-06-10multi: make sure 'data' can present in several sockhash entriesDaniel Stenberg
Since more than one socket can be used by each transfer at a given time, each sockhash entry how has its own hash table with transfers using that socket. In addition, the sockhash entry can now be marked 'blocked = TRUE'" which then makes the delete function just set 'removed = TRUE' instead of removing it "for real", as a way to not rip out the carpet under the feet of a parent function that iterates over the transfers of that same sockhash entry. Reported-by: Tom van der Woerdt Fixes #3961 Fixes #3986 Fixes #3995 Fixes #4004 Closes #3997
2019-06-09libcurl-tutorial.3: Fix small typo (mutipart -> multipart)Sorcus
Fixed-by: MrSorcus on github Closes #4000