aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-04-07HTTP pipelining: Fix handling of zero-length responsesChris Smowton
Also add test case 584 for the same Bug: http://curl.haxx.se/bug/view.cgi?id=3214223
2011-04-06libcurl.pc: version number fixDaniel Stenberg
This hasn't show the version number correctly since the $VERSION change in the configure, and now it works again.
2011-04-05Changed some nonportable typesDan Fandrich
2011-04-05Don't list NTLM in curl-config when HTTP is disabledDan Fandrich
Also, fixed Curl_proxyCONNECT() stub with HTTP disabled.
2011-04-05Fixed compatibility macro CURLE_URL_MALFORMAT_USERDan Fandrich
2011-04-05return code cleanup: build, init and run-time errorsDaniel Stenberg
Stop the abuse of CURLE_FAILED_INIT as return code for things not being init related by introducing two new return codes: CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for several years. It is used for returning error when something is attempted to be used but the feature/option was not enabled or explictitly disabled at build-time. Getting this error mostly means that libcurl needs to be rebuilt. CURLE_FAILED_INIT is now saved and used strictly for init failures. Getting this problem means something went seriously wrong, like a resource shortage or similar. CURLE_UNKNOWN_OPTION is the option formerly known as CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present, separately defined to be removed in a very distant future). This error code is meant to be used to return when an option is given to libcurl that isn't known. This problem would mostly indicate a problem in the program that uses libcurl.
2011-04-05FTP+proxy: macrofied functions when proxy disabledDaniel Stenberg
In my attempts to reduce #ifdefs in code, the SOCKS functions are now macros when libcurl is built without proxy support and therefore the FTP code could avoid some #ifs.
2011-04-05RELEASE-NOTES: synced with db59b6202d8Daniel Stenberg
2011-04-05[pop3 starttls] PASS command was not sent after upgrade to TLS.Ben Noordhuis
2011-04-05[pop3 starttls] the command to send is STLS, not STARTTLS.Ben Noordhuis
2011-04-04Added http_proxy.c to the Symbian build filesDan Fandrich
2011-04-04http-proxy: move proxy code to http_proxy.cDaniel Stenberg
The new http_proxy.* files now host HTTP proxy specific code (500+ lines moved out from http.c), and as a consequence there is a macro introduced for the Curl_proxyCONNECT() function so that code can use it without actually supporting proxy (or HTTP) in builds.
2011-04-04disable cookies: remove ifdefs, move codeDaniel Stenberg
1 - make sure to #define macros for cookie functions in the cookie header when cookies are disabled to avoid having to use #ifdefs in code using those functions. 2 - move cookie-specific code to cookie.c and use the functio conditionally as mentioned in (1). net result: 6 #if lines removed, and 9 lines of code less
2011-04-04nss: fix a crash within SSL_AuthCertificate()Kamil Dudka
The bug was introduced in 806dbb0 (a wrong value was passed in as the first argument to the default callback in our wrapper).
2011-04-03multi: shorten linesDaniel Stenberg
We keep them less than 80 columns
2011-04-02multi: conn goes bad when data changeDaniel Stenberg
Within multi_socket when conn is used as a shorthand, data could be changed and multi_runsingle could modify the connectdata struct to deal with. This bug has not been included in a public release. Using 'conn' like that turned out to be ugly. This change is a partial revert of commit f1c6cd42f474df59. Reported by: Miroslav Spousta Bug: http://curl.haxx.se/bug/view.cgi?id=3265485
2011-04-01Increased script version.Guenter Knauf
2011-04-01Make use of proxy vars if set.Guenter Knauf
Posted to the list by Quanah Gibson-Mount [quanah zimbra.com].
2011-04-01Use var again instead of hard-coded filename.Guenter Knauf
2011-03-29typo fixGisle Vanem
2011-03-29curl_easy_setopt.3: mention TFTP read callback flawDaniel Stenberg
The read callback must return the exact requested amount of data when it is used for doing TFTP uploads. This is due to how it deals with data internally. This could/should be fixed but for now we document the existing behavior. Reported by: Colin Blair Bug: http://curl.haxx.se/mail/lib-2011-03/0319.html
2011-03-27configure: fix libtool warningYang Tse
2011-03-25TSL-SRP: enabled with OpenSSLPeter Sylvester
If a new enough OpenSSL version is used, configure detects the TLS-SRP support and enables it.
2011-03-25RELEASE-NOTES: synced with 11c2db2aa2aDaniel Stenberg
2011-03-25fix: re-use of bound connectionsDaniel Stenberg
When asked to bind the local end of a connection when doing a request, the code will now disqualify other existing connections from re-use even if they are connected to the correct remote host. This will also affect which connections that can be used for pipelining, so that only connections that aren't bound or bound to the same device/port you're asking for will be considered.
2011-03-24symbols-in-versions: make test 1119 happyDaniel Stenberg
2011-03-23rtsp: move protocol code to dedicated fileDaniel Stenberg
The RTSP-specific function for checking for "dead" connection is better located in rtsp.c. The code using this is now written without #ifdefs as the function call is instead turned into a macro (in rtsp.h) when RTSP is disabled.
2011-03-23MAIL-ETIQUETTE: intro and spamDaniel Stenberg
Added a little generic info section about the lists and a section about how to deal with trolls and spam on the lists.
2011-03-23TODO-RELEASE: 1 fixed, 1 notabugDaniel Stenberg
Fixed: 271 - fix the IPv6-working probing to only exist at one place in the code and only get done once A problem not repeatable and no proper recipe given and therefore simply removed for now until we hear something else: 282 - 100 Continue responses should return the "final" HTTP response code: "Getting the HTTP response code following a 100 Continue"
2011-03-23ipv6: only probe onceDaniel Stenberg
Move ipv6-functional-probe into a single function that is used from all places that need to know. Make the probe function store the result in a static variable so that subsequent invokes just returns the previous result and won't have to probe again.
2011-03-22headers: more copyright headers addedDaniel Stenberg
2011-03-22MAIL-ETIQUETTE: how to behaveDaniel Stenberg
This is a new documentation for the source tree. This information has been present since a long time at http://curl.haxx.se/mail/etiquette.html but now it is put into a plain text version too for wider distribution. The web version will be automatically generated from this source document.
2011-03-21progress: don't print the last update on a separate line.Julien Chaffraix
Curl_posttransfer is called too soon to add the final new line. Moved the new line logic to pgrsDone as there is no more call to update the progress status after this call. Reported by: Dmitri Shubin <sbn_at_tbricks.com> http://curl.haxx.se/mail/lib-2010-12/0162.html
2011-03-21TODO-RELEASE: fixed 2, got 3 new!Daniel Stenberg
2011-03-21libcurl.m4: Add missing quotes in AC_LINK_IFELSEDave Reisner
This avoids warnings generated by autoconf 2.68. Signed-off-by: Dave Reisner <d@falconindy.com>
2011-03-20retry-request: rewind if data was sentDaniel Stenberg
When libcurl sends a HTTP request on a re-used connection and detects it being closed (ie no data at all was read from it), it is important to rewind if any data in the request was sent using the read callback or was read from file, as otherwise the retried request will be broken. Reported by: Chris Smowton Bug: http://curl.haxx.se/bug/view.cgi?id=3195205
2011-03-20configure: avoid $VERSIONDaniel Stenberg
To reduce the risk of variable name conflicts, use CURLVERSION instead of VERSION.
2011-03-20symbols-in-versions: many correctionsDaniel Stenberg
Scanned with a tool that checked for mistakes and this is the subsequent cleanup.
2011-03-20unit1305: Fixed the test to match our coding style.Julien Chaffraix
2011-03-19url: 0 is PROTOPT_NONE.Julien Chaffraix
Tiny tweak after Daniel's refactoring of the protocol handlers.
2011-03-19pop3: add state name in debug arrayDaniel Stenberg
We have an array with the state names only built and used when built debug enabled and this need to list all the states from the .h
2011-03-18Added two more POP3 testsDan Fandrich
2011-03-18pop3: use Curl_safefree() to allow torture tests to succeedDan Fandrich
2011-03-18symbol-scan.pl: detect duplicatesDaniel Stenberg
Test 1119 now also makes sure that symbols-in-versions doesn't contain any duplicates
2011-03-18CONTRIBUTE: minor editsDaniel Stenberg
Slightly modified to become a nicer web page when converted for the site
2011-03-18RELEASE-NOTES: synced with 0c05ee3a33d4d7Daniel Stenberg
2011-03-18pop3: remove unused variableDaniel Stenberg
2011-03-17Added support for LISTing a single POP3 messageDan Fandrich
Added tests for a number of POP3 LIST operations, including one that shows a curl problem when listing no messages, so is disabled.
2011-03-17pop3: fixed memory leak in an error retrieval caseDan Fandrich
2011-03-17symbols-in-versions: remove duplicatesDaniel Stenberg
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-22 22:16:18 +0000