aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2011-10-15singleipconnect: don't clobber errnoDaniel Stenberg
Save the errno value immediately after a connect() failure so that it won't get reset to something else before we read it. Bug: http://curl.haxx.se/mail/lib-2011-10/0066.html Reported by: Frank Van Uffelen and Fabian Hiernaux
2011-10-14docs: --xattrMichal Marek
2011-10-14file.c: fix compiler warningYang Tse
2011-10-14url.c: fix endless loop upon transport connection timeoutYang Tse
Jerry Wu detected and provided detailed info about this issue.
2011-10-14sws.c: HTTP and GOPHER test server-side connection closing adjustmentYang Tse
When, for a given test, server is instructed to close connection after server reply we now wait a very small amount of time (50ms) before doing so. This is done to allow client to, at least partially, read server reply before getting an ECONNRESET. The above is required to make test cases 1070, 1200, 1201 and 1202 pass with Cygwin 1.5.X on W2K. GOPHER test server closes connection after _every_ server-reply, as such, at some point it could require a bigger time or using shutdown() before a server-side initiated disconnection.
2011-10-13curl_gethostname.c: fix signed/unsigned comparison and avoid a double copyYang Tse
both introduced in 42be24af
2011-10-13curl_ntlm_msgs.c: fix variable shadowing declaration introduced in 185ed340Yang Tse
2011-10-13tftp.c: TFTP timeout and unexpected block adjustmentsMarcin Adamski
Set ACK timeout to 5 seconds. If we are waiting for block X and receive block Y that is the expected one, we should send ACK and increase X (which is already implemented). Otherwise drop the packet and don't increase retry counter.
2011-10-13multi.c: OOM handling fixesYang Tse
Prevent modification of easy handle being added with curl_multi_add_handle() unless this function actually suceeds. Run Curl_posttransfer() to allow restoring of SIGPIPE handler when Curl_connect() fails early in multi_runsingle().
2011-10-13url.c: make line shorter than 80 charsYang Tse
2011-10-12OOM handling/cleanup slight adjustmentsYang Tse
2011-10-11OOM handling/cleanup slight adjustmentsYang Tse
2011-10-10lib540.c: OOM handling fixes making test 540 pass torture testingYang Tse
2011-10-08RELEASE-NOTES: Fixed a couple of typosDan Fandrich
2011-10-08telnet.c: fix compiler warningYang Tse
2011-10-07libcurl: some OOM handling fixesYang Tse
2011-10-06multi.c: OOM handling fixes making torture tests 560 580 581 passYang Tse
2011-10-06test harness: non-stunnel https server integration overhaulYang Tse
2011-10-06curl tool: reviewed code moved to tool_*.[ch] filesYang Tse
2011-10-06buildconf: warn about autoconf 2.67 and 2.68 generating bad/unusable scriptsYang Tse
2011-10-05curl tool: fix compiler warningYang Tse
2011-10-05curl tool: OOM handling fixesYang Tse
2011-10-05curl tool: reviewed code moved to tool_*.[ch] filesYang Tse
2011-10-05curl tool: OOM handling fixesYang Tse
2011-10-05curl tool: OOM handling fixesYang Tse
2011-10-05curl tool: OOM handling fixesYang Tse
2011-10-05curl tool: header inclusion adjustmentYang Tse
2011-10-05curl tool: symbol check adjustmentYang Tse
2011-10-05curl tool: header inclusion adjustmentYang Tse
2011-10-05curl tool: code moved to tool_*.[ch] filesYang Tse
2011-10-04curl_share_cleanup: avoid compiler warningDaniel Stenberg
Move the variable declaration to within the #ifdef
2011-10-04struct Curl_share: provide sslsession unconditionallyDaniel Stenberg
It makes much nicer and less convuluted code everywhere if this struct member is always present even when libcurl is built without SSL support. This reverts parts of commit 15e3e451702396e
2011-10-04ftp: improved the failed PORT host name resolved error messageDaniel Stenberg
2011-10-03codepolicingDaniel Stenberg
2011-10-03sspi build fixDaniel Stenberg
define away Curl_ntlm_sspi_cleanup() when no windows SSPI build
2011-10-03smtp: Added support for NTLM authenticationSteve Holme
Modified smtp_endofresp() to detect NTLM from the server specified list of supported authentication mechanisms. Modified smtp_authenticate() to start the sending of the NTLM data. Added smtp_auth_ntlm_type1_message() which creates a NTLM type-1 message. This function is used by authenticate() to start the sending of data and by smtp_state_auth_ntlm_resp() when the AUTH command doesn't contain the type-1 message as part of the initial response. This lack of initial response can happen if an OOM error occurs or the type-1 message is longer than 504 characters. As the main AUTH command is limited to 512 character the data has to be transmitted in two parts; one containing the AUTH NTLM and the second containing the type-1 message. Added smtp_state_auth_ntlm_type2msg_resp() which handles the incoming type-2 message and sends an outgoing type-3 message. This type-2 message is sent by the server in response to our type-1 message. Modified smtp_state_auth_resp() to handle the response to: the AUTH NTLM without the initial response and the type-2 response. Modified smtp_disconnect() to cleanup the NTLM SSPI stack.
2011-10-03Curl_ntlm_create_typeX_message: Added the outlen parameterSteve Holme
Added the output message length as a parameter to both Curl_ntlm_create_type1_message() and Curl_ntlm_create_type3_message() for use by future functions that require it. Updated curl_ntlm.c to cater for the extra parameter on these two functions.
2011-10-03smtp: General tidy up ready for adding NTLM supportSteve Holme
Changed the name of variable l, in several functions, which represents the length of strings being sent to the server, to len which is more meaningful and consistent with other code in smtp.c and elsewhere. Reworked smtp_authenticate() to be simpler and easier to follow. Variables and now initialised in their definitions and if no username and password are specified the function sets the state to SMTP_STOP and returns immediately, rather than being part of a huge if statement.
2011-10-03curl tool: reviewed code moved to tool_*.[ch] filesYang Tse
2011-10-03smtp_mail: fixed another memory leakSteve Holme
... introduced in 7f304ab84f560c
2011-10-03m4: Use x in order to avoid variable 'x' set but not used ↵Dominique Leuenberger
[-Werror=unused-but-set-variable] This error could be caused by configure scripts being run with -Werror -Wall, which would lead to libcurl being detected as unusable.
2011-10-03share: don't use SSL unless enabledDaniel Stenberg
Don't even declare the struct members for disabled features Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface when trying to set a sharing option that has been disabled (or not enabled) in the library.
2011-10-02multi: progress function abort must close connectionDaniel Stenberg
When the progress function returns to cancel the request, we must mark the connection to get closed and it must do to the DONE state. do_init() must be called as early as possible so that state variables for new connections are reset early. We could otherwise see that the old values were still there when a connection was to be disconnected very early and it would make it behave wrongly. Bug: http://curl.haxx.se/mail/lib-2011-10/0006.html Reported by: Vladimir Grishchenko
2011-09-30tutorial: clarify the handle sharing when treadedDaniel Stenberg
Previously there was wording that made people uncertain of the exact rules. Feedback by: Julien Royer and Georg Lippitsch URL: http://curl.haxx.se/mail/lib-2011-09/0357.html
2011-09-30multi_runsingle: change state on callback abortDaniel Stenberg
Reported by: Marcin Adamski Bug: http://curl.haxx.se/mail/lib-2011-09/0329.html
2011-09-30curl tool: fix some more OOM handlingYang Tse
2011-09-30Fix SSL disabled builds broken with 'SSL session sharing' commit 5793bc37Yang Tse
2011-09-29smtp_mail: fix memory leakDaniel Stenberg
... introduced in 7f304ab84f560c
2011-09-29smtp_mail: Added support to MAIL FROM for the optional SIZE parameterSteve Holme
The size of the email can now be set via CURLOPT_INFILESIZE. This allows the email to be rejected by the server, if supported, and the maximum size has been configured on the server.
2011-09-29curlverh.h: next release will be 7.23.0Daniel Stenberg
generated by cgit v1.2.3 (git 2.25.1) at 2024-10-31 02:06:32 +0000