| Age | Commit message (Collapse) | Author |
|---|
|
We once supported two separate ftp instances in the test suite. Has not
been used the last decade.
Closes #5375
|
|
When looking for a protocol match among supported schemes, check the
most "popular" schemes first. It has zero functionality difference and
for all practical purposes a speed difference will not be measureable
but it still think it makes sense to put the least likely matches last.
"Popularity" based on the 2019 user survey.
Closes #5377
|
|
The tftpd server may still be busy if the total timeout of
25 seconds has not been reached or no sread error was received
during or after the execution of the timeout test 1238.
Once the next TFTP test comes around (eg. 1242 or 1243),
those will fail because the tftpd server is still waiting
on data from curl due to the UDP protocol being stateless
and having no connection close. On Linux this error may not
happen, because ICMP errors generated due to a swrite error
can also be returned async on the next sread call instead.
Therefore we will now just kill the tftpd server after test
1238 to make sure that the following tests are not affected.
This enables us to no longer ignore tests 1242, 1243, 2002
and 2003 on the CI platforms CirrusCI and AppVeyor.
Assisted-by: Peter Wu
Closes #5364
|
|
|
|
I rewrote the item 5.4 to be more generic about static dependencies.
|
|
MQTT - the start has already landed
tiny-curl - also mostly landed and is a continuous work
make menuconfig - basically no interest from users, not pushing there
|
|
To avoid an explosion of jobs, extend the existing CMake tests with
ngtcp2 and quiche support. macOS was previously moved to GitHub actions,
so the non-Linux case can be dropped.
|
|
Tested alt-svc with quiche. While at it, add missing MultiSSL reporting
(not tested).
|
|
Add three new CMake Find modules (using the curl license, but I grant
others the right to apply the CMake BSD license instead).
This CMake config is simpler than the autotools one because it assumes
ngtcp2 and nghttp3 to be used together. Another difference is that this
CMake config checks whether QUIC is actually supported by the TLS
library (patched OpenSSL or boringssl) since this can be a common
configuration mistake that could result in build errors later.
Unlike autotools, CMake does not warn you that the features are
experimental. The user is supposed to already know that and read the
documentation. It requires a very special build environment anyway.
Tested with ngtcp2+OpenSSL+nghttp3 and quiche+boringssl, both built from
current git master. Use `LD_DEBUG=files src/curl |& grep need` to figure
out which features (libldap-2.4, libssh2) to disable due to conflicts
with boringssl.
Closes #5359
|
|
setjmp.h should only be included if HAVE_SETJMP_H is defined.
Add additional log statements to see wether reads and writes
are blocking or finishing before an alarm signal is received.
Assisted-by: Peter Wu
Part of #5364
|
|
Reported-by: Marcel Raad
Follow-up to 148534db5
Fixes #5367
Closes #5369
|
|
- CMake-based MSYS builds use mingw-w64 to cross-compile.
- autotools-based builds are compiled using msys2-devel.
The difference is that the later ones are not cross-compiled
to Windows and instead require the msys2 runtime to be present.
At the moment only the Azure Pipelines CI builds actually
run autotools-based cross-compilation builds for Windows.
|
|
Some aspects have already been implemented over the years.
15.1 Client certificates are now supported:
- System stores via e35b0256eb34f1fe562e3e2a2615beb50a391c52
- PKCS#12 files via 0fdf96512613574591f501d63fe49495ba40e1d5
15.2 Ciphers can now be specified through:
- Algorithms via 9aefbff30d280c60fc9d8cc3e0b2f19fc70a2f28
Reviewed-by: Daniel Stenberg and Marcel Raad
Closes #5358
|
|
|
|
And bumped next version to 7.71.0
|
|
Closes #4346
|
|
|
|
Text 1560 is extended to verify.
Reported-by: Pavel Volgarev
Fixes #5344
Closes #5351
|
|
|
|
Return CURLE_AUTH_ERROR instead of CURLE_NOT_BUILT_IN for other
instances of QuerySecurityPackageInfo failing, as in
commit 2a81439553286f12cd04a4bdcdf66d8e026d8201.
Closes #5355
|
|
|
|
If the QLOGDIR environment variable is set, enable qlogging.
... and create Curl_qlogdir() in the new generic vquic/vquic.c file for
QUIC functions that are backend independent.
Closes #5353
|
|
That return code is reserved for build-time conditional code not being
present while this was a regular run-time error from a Windows API.
Reported-by: wangp on github
Fixes #5349
Closes #5350
|
|
|
|
|
|
Triggered by a crash detected by OSS-Fuzz after the dynbuf introduction in
ed35d6590e72. This should make the trailer handling more straight forward and
hopefully less error-prone.
Deliver the trailer header to the callback already at receive-time. No
longer caches the trailers to get delivered at end of stream.
Bug: https://bugs.chromium.org/p/oss-fuzz/issues/detail?id=22030
Closes #5348
|
|
Spending time on manpage checking makes no sense
for these builds due to lacking manpage support.
|
|
Test 1501 is flaky on Windows CI due to being time sensitive
and the testsuite relying on taskkill.exe to check for the
existance of processes which can take to much time itself.
Test 1056 is broken in autotools-based Windows builds due
to scope ID support missing in these builds at the moment.
|
|
OpenSSH for Windows shows group and other/world permissions as *,
because those concepts do not exist on Windows. It also does not
show the current or parent directory, so we just ignore those.
Reviewed-by: Daniel Stenberg
Closes #5328
|
|
|
|
In my very basic test that lists sftp://127.0.0.1/tmp/, this patched
code makes 161 allocations compared to 194 in git master. A 17%
reduction.
Closes #5336
|
|
|
|
quiche has the potential to log qlog files. To enable this, you must
build quiche with the qlog feature enabled `cargo build --features
qlog`. curl then passes a file descriptor to quiche, which takes
ownership of the file. The FD transfer only works on UNIX.
The convention is to enable logging when the QLOGDIR environment is
set. This should be a path to a folder where files are written with the
naming template <SCID>.qlog.
Co-authored-by: Lucas Pardue
Replaces #5337
Closes #5341
|
|
Follow-up to ed35d6590e72c
|
|
Closes #5335
|
|
Follow-up from dbd16c3e256c6c (regression in 7.70.0)
Closes #5334
|
|
|
|
Removes a 16K static buffer from the easy handle. Simplifies the code.
|
|
A common set of functions instead of many separate implementations for
creating buffers that can grow when appending data to them. Existing
functionality has been ported over.
In my early basic testing, the total number of allocations seem at
roughly the same amount as before, possibly a few less.
See docs/DYNBUF.md for a description of the API.
Closes #5300
|
|
Remove many one second sleeps that were done *after* each newly started
test server already has been verified. They should not have any purpose
there.
Closes #5323
|
|
... and instead convert those to asserts to make sure they are truly
never NULL.
Closes #5324
|
|
Closes #5325
|
|
- Check for NULL entry parameter before attempting to deref entry in
Curl_resolver_is_resolved, like is already done in asyn-ares.
This is to silence cppcheck which does not seem to understand that
asyn-ares and asyn-thread have separate Curl_resolver_is_resolved
and those units are mutually exclusive. Prior to this change it warned
of a scenario where asyn-thread's Curl_resolver_is_resolved is called
with a NULL entry from asyn-ares, but that couldn't happen.
Reported-by: rl1987@users.noreply.github.com
Fixes https://github.com/curl/curl/issues/5326
|
|
Follow-up to a96c752 which changed the timeout_ms type from time_t to
timediff_t.
Ref: https://github.com/curl/curl/pull/5240
Closes https://github.com/curl/curl/pull/5286
|
|
This makes sure that select_ws behaves similar to real select
which stops waiting on a signal handler being triggered.
This makes it possible to gracefully stop sockfilt.exe on
Windows with taskkill /IM sockfilt.exe (without /F force flag).
Reviewed-by: Jay Satiro
Part of #5260
|
|
This commit adds a global exit event to the test servers that
Windows-specific wait routines can use to get triggered if the
program was signaled to be terminated, eg. select_ws in sockfilt.c
The exit event will be managed by the signal handling code and is
set to not reset automatically to support multiple wait routines.
Reviewed-by: Jay Satiro
Closes #5260
|
|
Reviewed-by: Jay Satiro
Part of #5260
|
|
Use raise to trigger signal handler instead of calling it
directly and causing potential unexpected control flow.
Reviewed-by: Jay Satiro
Part of #5260
|
|
OpenSSH for Windows requires paths in the format of /C:/
instead of the pseudo-POSIX paths /cygdrive/c/ or just /c/
Reviewed-by: Daniel Stenberg
Closes #5298
|
|
|
