aboutsummaryrefslogtreecommitdiff
AgeCommit message (Collapse)Author
2016-01-11scripts: don't generate and install zsh completion when cross-compilingAlessandro Ghedini
2016-01-11scripts: fix zsh completion generationAlessandro Ghedini
The script should use the just-built curl, not the system one. This fixes zsh completion generation when no system curl is installed.
2016-01-11zsh.pl: fail if no curl is foundAlessandro Ghedini
Instead of generation a broken completion file.
2016-01-11IDN host names: Remove the port number before converting to ACEMichael Kaufmann
Closes #596
2016-01-10runtests: Add mbedTLS to the SSL backendsJay Satiro
.. and enable SSLpinning tests for mbedTLS, BoringSSL and LibreSSL.
2016-01-10mbedtls: implement CURLOPT_PINNEDPUBLICKEYThomas Glanzmann
2016-01-09url: Fix compile error with --enable-werrorTatsuhiro Tsujikawa
2016-01-08http2: Ensure that http2_handle_stream_close is calledTatsuhiro Tsujikawa
Previously, when HTTP/2 is enabled and used, and stream has content length known, Curl_read was not called when there was no bytes left to read. Because of this, we could not make sure that http2_handle_stream_close was called for every stream. Since we use http2_handle_stream_close to emit trailer fields, they were effectively ignored. This commit changes the code so that Curl_read is called even if no bytes left to read, to ensure that http2_handle_stream_close is called for every stream. Discussed in https://github.com/bagder/curl/pull/564
2016-01-08http2: handle the received SETTINGS frameDaniel Stenberg
This regression landed in 5778e6f5 and made libcurl not act on received settings and instead stayed with its internal defaults. Bug: http://curl.haxx.se/mail/lib-2016-01/0031.html Reported-by: Bankde
2016-01-08Revert "multiplex: allow only once HTTP/2 is actually used"Daniel Stenberg
This reverts commit 46cb70e9fa81c9a56de484cdd7c5d9d0d9fbec36. Bug: http://curl.haxx.se/mail/lib-2016-01/0031.html
2016-01-08http2: Fix PUSH_PROMISE headers being treated as trailersTatsuhiro Tsujikawa
Discussed in https://github.com/bagder/curl/pull/564
2016-01-08connection reuse: IDN host names fixedMichael Kaufmann
Use the ACE form of IDN hostnames as key in the connection cache. Add new tests. Closes #592
2016-01-07tests: mark IPv6 FTP and FTPS tests with the FTP keywordDaniel Stenberg
2016-01-07mbedtls: Fix ALPN supportJay Satiro
- Fix ALPN reply detection. - Wrap nghttp2 code in ifdef USE_NGHTTP2. Prior to this change ALPN and HTTP/2 did not work properly in mbedTLS.
2016-01-06http2: Fix client write for trailers on stream closeJay Satiro
Check that the trailer buffer exists before attempting a client write for trailers on stream close. Refer to comments in https://github.com/bagder/curl/pull/564
2016-01-07COPYING: update general copyright year rangeDaniel Stenberg
2016-01-06ConnectionExists: add missing newline in infof() callDaniel Stenberg
Mistake from commit a464f33843ee1
2016-01-06multiplex: allow only once HTTP/2 is actually usedDaniel Stenberg
To make sure curl doesn't allow multiplexing before a connection is upgraded to HTTP/2 (like when Upgrade: h2c fails), we must make sure the connection uses HTTP/2 as well and not only check what's wanted. Closes #584 Patch-by: c0ff
2016-01-04curl_global_init.3: Add Windows-specific info for init via DLLJay Satiro
- Add to both curl_global_init.3 and libcurl.3 the caveat for Windows that initializing libcurl via a DLL's DllMain or static initializer could cause a deadlock. Bug: https://github.com/bagder/curl/issues/586 Reported-by: marc-groundctl@users.noreply.github.com
2016-01-04FAQ: clarify who to mail about ECCN clarificationsDaniel Stenberg
2016-01-04progressfunc.c: spellfix descriptionDaniel Stenberg
2016-01-04docs/examples/multi-app.c: fix bad desc formattingDaniel Stenberg
2016-01-04examples: added descriptionsDaniel Stenberg
2016-01-04example/simple.c: add descriptionDaniel Stenberg
2016-01-04getredirect.c: a new exampleDaniel Stenberg
2015-12-27RELEASE-NOTES: add 5e0e81a9c4e35f04caMarc Hoersken
2015-12-26RELEASE-NOTES: synced with 2aec4359db1088b10dDaniel Stenberg
2015-12-26test 1515: add data checkMarc Hoersken
2015-12-26test 1515: add MSYS support by passing a relative pathMarc Hoersken
MSYS would otherwise turn a /-style path into a C:\-style path.
2015-12-26test 539: use datacheck mode text for ASCII-mode LISTingsMarc Hoersken
While still using datacheck mode binary for the inline reply data.
2015-12-26runtests.pl: check up to 5 data parts with different text modesMarc Hoersken
Move the text-mode conversion for reply/replycheck from the verify section into the load section and add support for 4 more check parts.
2015-12-24CURLOPT_RANGE: for HTTP servers, range support is optionalDaniel Stenberg
2015-12-24tests 1048 and 1050: use datacheck mode text for ASCII-mode LISTingsMarc Hoersken
2015-12-24tests 706 and 707: use datacheck mode text for ASCII-mode LISTingsMarc Hoersken
2015-12-24tests 400,403,406: use datacheck mode text for ASCII-mode LISTingsMarc Hoersken
2015-12-23sockfilt.c: fix calculation of sleep timeout on WindowsMarc Hoersken
Not converting to double caused small timeouts to be skipped.
2015-12-23tests first.c: fix calculation of sleep timeout on WindowsMarc Hoersken
Not converting to double caused small timeouts to be skipped.
2015-12-23test 573: add more debug outputMarc Hoersken
2015-12-23ftplistparser.c: fix handling of file LISTings using Windows EOLMarc Hoersken
Previously file.txt[CR][LF] would have been returned as file.tx (without the last t) if filetype is symlink. Now the t is included and the internal item_length includes the zero byte. Spotted using test 576 on Windows.
2015-12-23test 16: fix on Linux (and Windows) by using plain ASCII charactersMarc Hoersken
Follow up on b064ff0c351bb287557228575ef4c1d079b866fb, thanks Daniel.
2015-12-23tftpd server: add Windows support by writing files in binary modeMarc Hoersken
2015-12-23tests 252-255: use datacheck mode text for ASCII-mode LISTingsMarc Hoersken
2015-12-23test 16: fix on Windows by converting data file from ANSI to UTF-8Marc Hoersken
2015-12-23Makefile.inc: s/curl_SOURCES/CURL_FILESDaniel Stenberg
This allows the root Makefile.am to include the Makefile.inc without causing automake to warn on it (variables named *_SOURCES are magic). curl_SOURCES is then instead assigned properly in src/Makefile.am only. Closes #577
2015-12-23ConnectionExists: with *PIPEWAIT, wait for connectionsAnders Bakken
Try harder to prevent libcurl from opening up an additional socket when CURLOPT_PIPEWAIT is set. Accomplished by letting ongoing TCP and TLS handshakes complete first before the decision is made. Closes #575
2015-12-23Add .dir-locals and set c-basic-offset to 2.Anders Bakken
This makes it easier for emacs users to automatically get the right 2-space indentation when they edit curl source files. c++-mode is in there as well because Emacs can't easily know if something is a C or C++ header. Closes #574
2015-12-20configure: detect IPv6 support on WindowsJohannes Schindelin
This patch was "nicked" from the MINGW-packages project by Daniel. https://github.com/Alexpux/MINGW-packages/commit/9253d0bf58a1486e91f7efb5316e7fdb48fa4007 Signed-off-by: Johannes Schindelin <johannes.schindelin@gmx.de>
2015-12-20configure: allow static builds on mingwDaniel Stenberg
This patch is adopted from the MINGW-packages project. It makes it possible to build curl both shared and static again. URL: https://github.com/Alexpux/MINGW-packages/tree/master/mingw-w64-curl
2015-12-17test 1326: fix file check since curl is outputting binary dataMarc Hoersken
2015-12-17test 1326: fix getting stuck on Windows due to incomplete requestMarc Hoersken
The request needs to be read and send in binary mode in order to use CRLF instead of LF. Adding --upload-file - causes curl to read stdin in binary mode.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-15 14:49:21 +0000