Age | Commit message (Collapse) | Author |
|
|
|
|
|
|
|
For some reason, CMake 2.8.12.2 did not expand the list argument in a
single DEPENDS argument. Remove the quotes, so it gets expanded into
multiple arguments for add_custom_command and add_custom_target.
Fixes https://github.com/curl/curl/issues/1370
Closes #1372
|
|
'left' is used as time_t but declared as long.
MinGW complains:
error: conversion to 'long int' from 'time_t {aka long long int}' may alter
its value [-Werror=conversion]
Changed the declaration to time_t.
|
|
In release mode, MinGW complains:
error: unused parameter 'lib_error_code' [-Werror=unused-parameter]
|
|
The function tool_debug_cb doesn't match curl_debug_callback in curl.h
(unsigned vs. signed char* for 3rd param).
Bug: https://curl.haxx.se/mail/lib-2017-03/0120.html
|
|
[-Wint-in-bool-context]
Closes #1371
|
|
If CURL_DISABLE_VERBOSE_STRINGS is defined, hostname is not used in
schannel_connect_step3.
|
|
When CURL_DISABLE_VERBOSE_STRINGS is defined, the reason parameter in
Curl_conncontrol is not used as the infof macro expands to nothing.
|
|
At least under Windows, there is no SIZEOF_LONG, so it evaluates to 0 even
though sizeof(int) == sizeof(long). This should probably have been
CURL_SIZEOF_LONG, but the type of timeout_ms changed from long to time_t
anyway.
This triggered MSVC warning C4668 about implicitly replacing undefined
macros with '0'.
Closes https://github.com/curl/curl/pull/1362
|
|
|
|
|
|
|
|
Feature defines are normally checked with #ifdef instead of #if in the rest of
the codebase. Additionally, some compilers warn when a macro is implicitly
evaluated to 0 because it is not defined, which was the case here.
Ref: https://github.com/curl/curl/pull/1362#discussion_r108605101
Closes https://github.com/curl/curl/pull/1367
|
|
As you can see the callback definition uses a char* for the first
argument, while the function uses a void*.
URL: https://curl.haxx.se/mail/lib-2017-03/0116.html
|
|
|
|
Closes #1364
|
|
Closes #1366
|
|
... to make it much faster. Idea developed with primepie on IRC.
Closes #1365
|
|
If we use FTPS over CONNECT, the TLS handshake for the FTPS control
connection needs to be initiated in the SENDPROTOCONNECT state, not
the WAITPROXYCONNECT state. Otherwise, if the TLS handshake completed
without blocking, the information about the completed TLS handshake
would be saved to a wrong flag. Consequently, the TLS handshake would
be initiated in the SENDPROTOCONNECT state once again on the same
connection, resulting in a failure of the TLS handshake. I was able to
observe the failure with the NSS backend if curl ran through valgrind.
Note that this commit partially reverts curl-7_21_6-52-ge34131d.
|
|
When receiving chunked encoded data with trailers, and the write
callback returns PAUSE, there might be both body and header to store to
resend on unpause. Previously libcurl returned error for that case.
Added test case 1540 to verify.
Reported-by: Stephen Toub
Fixes #1354
Closes #1357
|
|
When using basic-auth, connections and proxy connections
can be re-used with different Authorization headers since
it does not authenticate the connection (like NTLM does).
For instance, the below command should re-use the proxy
connection, but it currently doesn't:
curl -v -U alice:a -x http://localhost:8181 http://localhost/
--next -U bob:b -x http://localhost:8181 http://localhost/
This is a regression since refactoring of ConnectionExists()
as part of: cb4e2be7c6d42ca0780f8e0a747cecf9ba45f151
Fix the above by removing the username and password compare
when re-using proxy connection at proxy_info_matches().
However, this fix brings back another bug would make curl
to re-print the old proxy-authorization header of previous
proxy basic-auth connection because it wasn't cleared.
For instance, in the below command the second request should
fail if the proxy requires authentication, but would succeed
after the above fix (and before aforementioned commit):
curl -v -U alice:a -x http://localhost:8181 http://localhost/
--next -x http://localhost:8181 http://localhost/
Fix this by clearing conn->allocptr.proxyuserpwd after use
unconditionally, same as we do for conn->allocptr.userpwd.
Also fix test 540 to not expect digest auth header to be
resent when connection is reused.
Signed-off-by: Isaac Boukris <iboukris@gmail.com>
Closes https://github.com/curl/curl/pull/1350
|
|
- Fix compile errors that occur in openssl.c when OpenSSL lib was
built without DSA support.
Bug: https://github.com/curl/curl/issues/1361
Reported-by: neheb@users.noreply.github.com
|
|
|
|
No need to redeclare the variable.
|
|
error: conversion to 'long int' from 'time_t {aka long long int}' may alter
its value [-Werror=conversion]
|
|
If Makefile.am uses CRLF, buildconf in a Windows checkout fails with:
".ibtoolize: error: AC_CONFIG_MACRO_DIRS([m4]) conflicts with
ACLOCAL_AMFLAGS=-I m4"
|
|
Closes #1356
|
|
Reported-by: Brian Carpenter
Added test 1442 to verify
|
|
curl must be built before building the tests.
Closes https://github.com/curl/curl/pull/1352
|
|
|
|
Send curl_socket_t to event_cb and make sure it hasn't been closed yet.
Closes https://github.com/curl/curl/pull/1318
|
|
|
|
- If SSL_get_error is called but no extended error detail is available
then show that SSL_ERROR_* as a string.
Prior to this change there was some inconsistency in that case: the
SSL_ERROR_* code may or may not have been shown, or may have been shown
as unknown even if it was known.
Ref: https://github.com/curl/curl/issues/1300
Closes https://github.com/curl/curl/pull/1348
|
|
This is nowadays included with the base perl distribution, but wasn't
prior to about perl 5.14
|
|
Signed-off-by: Anders Roxell <anders.roxell@gmail.com>
Closes #1342
|
|
|
|
|
|
Running this in the root build dir will invoke the test suite to only
run tests not marked as 'flaky'.
|
|
|
|
Ref: https://curl.haxx.se/mail/lib-2017-02/0097.html
Closes https://github.com/curl/curl/pull/1272
|
|
Note that for some reason there is this warning (that also exists with
autotools, added since curl-7_15_1-94-ga718cb05f):
docs/libcurl/curl_multi_socket_all.3:1: can't open `man3/curl_multi_socket.3': No such file or directory
Additionally, adjust the roffit --mandir option to support creating
links when doing out-of-tree builds.
Ref: https://github.com/curl/curl/pull/1288
|
|
Also make Perl mandatory to allow building the docs.
While CMakeLists.txt could probably read the list of manual pages from
Makefile.am, actually putting those in CMakeLists.txt is cleaner so that
is what is done here.
Fixes #1230
Ref: https://github.com/curl/curl/pull/1288
|
|
For easier sharing with CMake. The contents were reformatted to use
two-space indent and expanded tabs (matching lib/Makefile.common).
Ref: https://github.com/curl/curl/pull/1288
|
|
|
|
|
|
|
|
The code would refer to the wrong data pointer. Only debug builds do
this - for verbosity.
Reported-by: zelinchen@users.noreply.github.com
Fixes #1329
|
|
|