aboutsummaryrefslogtreecommitdiff
path: root/CHANGES
AgeCommit message (Collapse)Author
2008-08-05Validate that autom4te and autoconf versions match.Yang Tse
Validate that aclocal and automake versions match. Improve removal of previous run generated files. Remove verbose debug logging of aclocal on Solaris.
2008-08-04- Yehoshua Hershberg found a problem that would make libcurl re-use aDaniel Stenberg
connection with the multi interface even if a previous use of it caused a CURLE_PEER_FAILED_VERIFICATION to get returned. I now make sure that failed SSL connections properly close the connections.
2008-08-04- Test cases 1051, 1052 and 1055 were added by Daniel Fandrich on July 30 andDaniel Stenberg
proved how PUT and POST with a redirect could lead to a "hang" due to the data stream not being rewound properly when it had to in order to get sent properly (again) to the subsequent URL. This is now fixed and these test cases are no longer disabled.
2008-08-04Autoconf 2.62 has changed the behaviour of the AC_AIX macro which we use.Yang Tse
Prior versions of autoconf defined _ALL_SOURCE if _AIX was defined. But, autoconf 2.62 version of AC_AIX defines _ALL_SOURCE along with other four preprocessor symbols no matter if the system is AIX or not. To keep the traditional behaviour, as well as an uniform one, across autoconf versions AC_AIX is replaced with our own internal macro.
2008-08-03- Test case 1041 (added by Daniel Fandrich April 14th) proved a bug where PUTDaniel Stenberg
with -C - sent garbage in the Content-Range: header. I fixed this problem by making sure libcurl always sets the size of the _entire_ upload if an app attemps to do resumed uploads since libcurl simply cannot know the size of what is currently at the server end. Test 1041 is no longer disabled.
2008-08-03refer to the new option by its real nameDaniel Stenberg
2008-08-02No longer test availability of the gdi32 library, nor use it for linking, evenYang Tse
when we have been doing this since revision 1.47 of configure.ac 4 years and 5 months ago when cross-compiling a Windows target. We actually don't use any function from the Windows GDI (Graphics Device Interface) related with drawing or graphics-related operations.
2008-08-01Added support for --append on SFTP uploads. Unfortunately, OpenSSH doesn'tDan Fandrich
support this so it goes untested.
2008-08-01Removed definition of CURL_CHECK_WORKING_RESOLVER from acinclude.m4 it hasYang Tse
not been in use since revision 1.81 of configure.in 6 years, 9 months ago.
2008-08-01Sync up with realityYang Tse
2008-08-01User names embedded in proxy URLs without a password were parsedDan Fandrich
incorrectly--the host name is treated as part of the user name and the port number becomes the password. This can be observed in test 279 (was KNOWN_ISSUE #54).
2008-07-31Fixed a problem with any FTP URL or any URLs containing an IPv6 addressDan Fandrich
being mangled when passed to proxies when CURLOPT_PORT is also set (reported by Pramod Sharma).
2008-07-31Fixed parsing of an IPv6 proxy address to support a scope identifier,Dan Fandrich
as well as IPv4 addresses in IPv6 format. Also, better handle the case of a malformatted IPv6 address (avoid empty and NULL strings).
2008-07-31Fixed a couple of buffer overflows in the MS-DOS port of the curl tool.Dan Fandrich
Factored out unslashquote. Added some 'const's in function parameters.
2008-07-30- Phil Blundell added the CURLOPT_SCOPE option, as well as adjusted the URLDaniel Stenberg
parser to allow numerical IPv6-addresses to be specified with the scope given, as per RFC4007 - with a percent letter that itself needs to be URL escaped. For example, for an address of fe80::1234%1 the HTTP URL is: "http://[fe80::1234%251]/"
2008-07-30- PHP's bug report #43158 (http://bugs.php.net/bug.php?id=43158) identifies aDaniel Stenberg
true bug in libcurl built with OpenSSL. It made curl_easy_getinfo() more or less always return 0 for CURLINFO_SSL_VERIFYRESULT because the function that would set it to something non-zero would return before the assign in almost all error cases. The internal variable is now set to non-zero from the start of the function only to get cleared later on if things work out fine.
2008-07-30Added test cases 1052 through 1055 to test uploading data from filesDan Fandrich
during redirects. Test cases 1052 and 1055 show problems (maybe the same root cause as 1051) and are disabled.
2008-07-30Added test case 1051 to test Location: following with PUT, as reportedDan Fandrich
by Ben Sutcliffe. The test when run manually shows a problem in curl, but the test harness web server doesn't run the test correctly so it's disabled for now.
2008-07-30Fixed --use-ascii to properly convert text files on Symbian OS, MS-DOSDan Fandrich
and OS/2.
2008-07-29Added test case 1050 to test --ftp-port with an IPv6 address.Dan Fandrich
Made --interface tests less restrictive on host address.
2008-07-28Added test cases 1045 through 1049 as simple tests of --interface using theDan Fandrich
localhost interface.
2008-07-27Added feature in runtests.pl to select tests based on key word.Dan Fandrich
2008-07-26- David Bau filed bug report #2026240 "CURL_READFUNC_PAUSE leads to bufferDaniel Stenberg
overrun" (http://curl.haxx.se/bug/view.cgi?id=2026240) identifying two problems, and providing the fix for them: - CURL_READFUNC_PAUSE did in fact not pause the _sending_ of data that it is designed for but paused _receiving_ of data! - libcurl didn't internally set the read counter to zero when this return code was detected, which would potentially lead to junk getting sent to the server.
2008-07-26Added test 1044 to test large file support in ftp with -I.Dan Fandrich
2008-07-24Changed the long logfile elision code in runtests.pl to properly handleDan Fandrich
lines ending in \r.
2008-07-23- I went over the curl_easy_setopt man page and replaced most references toDaniel Stenberg
non-zero with the fixed value of 1. We should strive at making options support '1' for enabling them mentioned explicitly, as that then will allow us for to extend them in the future without breaking older programs.
2008-07-21Use the sreadfrom() wrapper to replace recvfrom() in our code.Yang Tse
2008-07-21when recvfrom prototype uses a void pointer for arguments 2, 5 or 6 this willYang Tse
now cause the definition of RECVFROM_TYPE_ARG2_IS_VOID, RECVFROM_TYPE_ARG5_IS_VOID or RECVFROM_TYPE_ARG6_IS_VOID, as appropriate.
2008-07-17RECVFROM_TYPE_ARG2, RECVFROM_TYPE_ARG5 and RECVFROM_TYPE_ARG6 are now definedYang Tse
to the data type pointed by its respective argument and not the pointer type.
2008-07-16Configure process now checks availability of recvfrom() socket function andYang Tse
finds out its return type and the types of its arguments. Added definitions for non-configure systems config files, and introduced macro sreadfrom which will be used on udp sockets as a recvfrom() wrapper.
2008-07-15add comment for include pathsYang Tse
2008-07-15Added test1042 and test1043 to test -C - on HTTP.Dan Fandrich
2008-07-15Added test1040 and test1041 to test -C - on HTTP. Test 1041 failed so it'sDan Fandrich
added to DISABLED.
2008-07-14Move _REENTRANT definition earlier in lib/setup.hYang Tse
2008-07-14Removed inclusion of remaining system header files from configuration files.Yang Tse
These are included from lib/setup.h or specific source code file.
2008-07-14HTTP_ONLY definition check in lib/setup.h is now done once that configurationYang Tse
file has been included. In this way if symbol is defined in the config file it will no longer be ignored.
2008-07-11Added missing multiple header inclusion prevention definitionYang Tse
2008-07-11Fixed test 553 to pass the torture test.Dan Fandrich
2008-07-11- Daniel Fandrich found out we didn't pass on the user-agent properly whenDaniel Stenberg
doing "proxy-tunnels" with non-HTTP prototols and that was simply because the code assumed the user-agent was only needed for HTTP.
2008-07-11Added test cases 1038 and 1039 to test Adrian Kreher's report that ftpDan Fandrich
uploads with -C - didn't resume properly, but the tests pass.
2008-07-11Changed slightly the SFTP quote commands chmod, chown and chgrp to onlyDan Fandrich
set the attribute that has changed instead of all possible ones. Hopefully, this will solve the "Permission denied" problem that Nagarajan Sreenivasan reported when setting some modes, but regardless, it saves a protocol round trip in the chmod case.
2008-07-10Peter Lamberg filed bug report #2015126: "poll gives WSAEINVAL when POLLPRIYang Tse
is set in fdset.events" (http://curl.haxx.se/bug/view.cgi?id=2015126) which exactly pinpointed the problem only triggered on Windows Vista, provided reference to docs and also a fix. There is much work behind Peter Lamberg's excellent bug report. Thank You!
2008-07-10Added tests 1036 and 1037 to verify resumed ftp downloads with -C -Dan Fandrich
2008-07-09- Andreas Schuldei improved Phil Blundell's patch for IPv6 using c-ares, and IDaniel Stenberg
edited it slightly. Now you should be able to use IPv6 addresses fine even with libcurl built to use c-ares.
2008-07-09Fixed an OOM handling problem that cause test 11 to fail the torture test.Dan Fandrich
2008-07-08Fixed test 554 to pass the torture test.Dan Fandrich
2008-07-07Added test cases 1034 & 1035 to test IDN name conversion failures.Dan Fandrich
2008-07-07- Scott Barrett provided a test case for a segfault in the FTP code and theDaniel Stenberg
fix for it. It occured when you did a FTP transfer using CURLFTPMETHOD_SINGLECWD and then did another one on the same easy handle but switched to CURLFTPMETHOD_NOCWD. Due to the "dir depth" variable not being cleared properly. Scott's test case is now known as test 539 and it verifies the fix.
2008-07-05mention that egrep and ar are also mandatoryYang Tse
2008-07-03Phil Blundell provided a fix for libcurl's treatment of unexpected 1xxDaniel Stenberg
response codes. Previously libcurl would hang on such occurances. I added test case 1033 to verify.