aboutsummaryrefslogtreecommitdiff
path: root/CHANGES
AgeCommit message (Collapse)Author
2008-09-25give proper credit!Daniel Stenberg
2008-09-25- Fixed the HTTP Digest auth code to not behave badly when getting a blank realmDaniel Stenberg
with realm="". http://curl.haxx.se/bug/view.cgi?id=2126435
2008-09-24Make sure not to dereference the wrong UrlState proto union member whenDan Fandrich
switching from one protocol to another in a single request (e.g. redirecting from HTTP to FTP as in test 1055) by resetting state.expect100header before every request.
2008-09-23- Introducing Jamie Lokier's function for date to epoch conversion used in theDaniel Stenberg
date parser function. This makes our function less dependent on system- provided functions and instead we do all the magic ourselves. We also no longer depend on the TZ environment variable.
2008-09-23- Rob Crittenden brought a patch to "add some locking for thread-safety to NSSDaniel Stenberg
implementation".
2008-09-22- Made the SOCKS code use the new Curl_read_plain() function to fix the bugDaniel Stenberg
Markus Moeller reported: http://curl.haxx.se/mail/archive-2008-09/0016.html - recv() errors other than those equal to EAGAIN now cause proper CURLE_RECV_ERROR to get returned. This made test case 160 fail so I've now disabled it until we can figure out another way to exercise that logic.
2008-09-22- Michael Goffioul filed bug report #2107377 "Problem with mutli + GnuTLS +Daniel Stenberg
proxy" (http://curl.haxx.se/bug/view.cgi?id=2107377) that showed how a multi interface using program didn't work when built with GnuTLS and a CONNECT request was done over a proxy (basically test 502 over a proxy to a HTTPS site). It turned out the ssl connect function would get called twice which caused the second call to fail.
2008-09-22Fixed test 539 to handle an out of memory condition that shows up nowDan Fandrich
that memdebug.h is included in the test programs.
2008-09-20fix regression in configure script which affected OpenSSL builds on MSYSYang Tse
2008-09-19configure script now checks availability of the alarm() functionYang Tse
2008-09-19Don't bother to install a SIGALRM handler unless alarm() is available.Dan Fandrich
Also, leave the existing SIGALRM handler alone if the timeout is too small to handle.
2008-09-18sync up with realityYang Tse
2008-09-17Removed reference to curl-ca-bundle.crt in the host verification failureDan Fandrich
error message.
2008-09-17sync up with realityYang Tse
2008-09-13Disable tracking of fdopen() calls in the low-level memory leak trackingYang Tse
code when fdopen() is not available, to avoid compiler error.
2008-09-12sync with realityYang Tse
2008-09-10Checked in some code improvements and minor fixes that I discovered in theDan Fandrich
FreeBSD ports system.
2008-09-10Checked in some grammatical and minor other fixes in the documentation andDan Fandrich
examples that I found in the FreeBSD ports system.
2008-09-09Mike Revi discovered some swapped speed switches documented in the curl manDan Fandrich
page.
2008-09-08Dmitry Kurochkin fixed pipelining over proxy using the multi interfaceDaniel Stenberg
2008-09-08- Stefan Krause pointed out that libcurl would wrongly send away cookies toDaniel Stenberg
sites in cases where the cookie clearly has a very old expiry date. The condition was simply that libcurl's date parser would fail to convert the date and it would then count as a (timed-based) match. Starting now, a missed date due to an unsupported date format or date range will now cause the cookie to not match.
2008-09-05Improved the logic the decides whether to use HTTP 1.1 features or not in aDan Fandrich
request. Detect cases where an upload must be sent chunked and the server supports only HTTP 1.0 and return CURLE_UPLOAD_FAILED.
2008-09-05- Martin Drasar provided the CURLOPT_POSTREDIR patch. It renamesDaniel Stenberg
CURLOPT_POST301 (but adds a define for backwards compatibility for you who don't define CURL_NO_OLDIES). This option allows you to now also change the libcurl behavior for a HTTP response 302 after a POST to not use GET in the subsequent request (when CURLOPT_FOLLOWLOCATION is enabled). I edited the patch somewhat before commit. The curl tool got a matching --post302 option. Test case 1076 was added to verify this.
2008-09-05- Introducing CURLOPT_CERTINFO and the corresponding CURLINFO_CERTINFO. ByDaniel Stenberg
enabling this feature with CURLOPT_CERTINFO for a request using SSL (HTTPS or FTPS), libcurl will gather lots of server certificate info and that info can then get extracted by a client after the request has completed with curl_easy_getinfo()'s CURLINFO_CERTINFO option. Linus Nielsen Feltzing helped me test and smoothen out this feature. Unfortunately, this feature currently only works with libcurl built to use OpenSSL. This feature was sponsored by networking4all.com - thanks!
2008-09-05- Dmitriy Sergeyev pointed out that curl_easy_pause() didn't unpause properlyDaniel Stenberg
during certain conditions. I also changed this code to use realloc() based on Daniel Fandrich's suggestion.
2008-09-05sync with realityYang Tse
2008-09-04fix print formatting string directivesYang Tse
2008-09-03Search for the FreeBSD CA cert file /usr/local/share/certs/ca-root.crtDan Fandrich
2008-09-02Fixed an out of memory problem that caused torture test failures in testsDan Fandrich
706 and 707.
2008-09-02- Keith Mok added supported_protocols and supported_features to the pkg-configDaniel Stenberg
file for libcurl, and while doing that fix he unified with curl-config.in how the supported protocols and features are extracted and used, so both those tools should now always be synced.
2008-09-01stand back for 7.19.0Daniel Stenberg
2008-08-29Added tests 1071 through 1074 to test automatic downgrading from HTTP 1.1Dan Fandrich
to HTTP 1.0 upon receiving a response from the HTTP server. Tests 1072 and 1073 are similar to test 1069 in that they involve the impossible scenario of sending chunked data to a HTTP 1.0 server. All these currently fail and are added to DISABLED. Added test 1075 to test --anyauth with Basic authentication.
2008-08-29- When libcurl was doing a HTTP POST and the server would respond withDaniel Stenberg
"Connection: close" and actually close the connection after the response-body, libcurl could still have outstanding data to send and it would not properly notice this and stop sending. This caused weirdness and sad faces. http://curl.haxx.se/bug/view.cgi?id=2080222 Note that there are still reasons to consider libcurl's behavior when getting a >= 400 response code while sending data, as Craig Perras' note "http upload: how to stop on error" specifies: http://curl.haxx.se/mail/archive-2008-08/0138.html
2008-08-28- I'm abandoning the system with the web site mirrors (but keeping downloadDaniel Stenberg
files bing mirrored) and thus I've changed the URL in the cookiejar header to no longer use curlm.haxx.se but instead use the main site curl.haxx.se
2008-08-28- Dengminwen reported that libcurl would lock a (cookie) share twice (withoutDaniel Stenberg
an unlock in between) for a certain case and that in fact works when using regular windows mutexes but not with pthreads'! Locks should of course not get locked again so this is now fixed. http://curl.haxx.se/mail/lib-2008-08/0422.html
2008-08-28Fixed test case 1065 by changing the handling of CURLOPT_UPLOAD to setDan Fandrich
the HTTP method to GET (or HEAD) when given a value of 0.
2008-08-27VC6 generated .dsp file now supports 4 configurations:Yang Tse
libcurl - Win32 DLL Debug libcurl - Win32 DLL Release libcurl - Win32 LIB Debug libcurl - Win32 LIB Release
2008-08-26Fixed out of memory problems that caused torture test failures in testsDan Fandrich
1021 and 1067.
2008-08-26Added check and symbol definition for WIN32 file API usage in configure,Yang Tse
supporting configure's --disable-largefile option for WIN32 targets also. Non-configure systems which do not use config-win32.h configuration file, and want to use the WIN32 file API, must define USE_WIN32_LARGE_FILES or USE_WIN32_SMALL_FILES as appropriate in their own configuration files.
2008-08-23- Running 'make ca-firefox' in the root build dir will now run the newDaniel Stenberg
firefox-db2pem.sh conversion script that converts a local Firefox db of ca certs into PEM format, suitable for use with a OpenSSL or GnuTLS built libcurl.
2008-08-23- Constantine Sapuntzakis fixed a bug when doing proxy CONNECT with the multiDaniel Stenberg
interface, and the proxy would send Connection: close during the authentication phase. http://curl.haxx.se/bug/view.cgi?id=2069047
2008-08-22Fixed a problem when --dump-header - was given with more than one URL,Dan Fandrich
which caused an error when the second header was dumped due to stdout being closed. Added test case 1066 to verify. Also fixed a potential problem where a closed file descriptor might be used for an upload when more than one URL is given.
2008-08-22Adjustments to better select/differentiate when large/small fileYang Tse
support is provided using WIN32 functions directly.
2008-08-22Improved curl_m*printf() integral data type size and signedness handlingYang Tse
2008-08-21Fixed a couple of bugs in libcurl's internal curl_m*printf() functions.Yang Tse
2008-08-20Update of lib/Makefile.Watcom.Yang Tse
2008-08-20Added an edited version of Vincent Le Normand's documentation of SFTP quoteDan Fandrich
commands to the man pages.
2008-08-20- Phil Pellouchoud pointed out that the windows version of libcurl had aDaniel Stenberg
memory leak because it never called the OpenSSL function CRYPTO_cleanup_all_ex_data() as it was supposed to. This was because of a missing define in config-win32.h!
2008-08-18Added test case 557 to verify libcurl's internal curl_m*printf() functionsYang Tse
formatting functionality when handling signed and unsigned longs, as well as our curl_off_t data type.
2008-08-17OpenSSl enabled NetWare builds are changed to use the 'openssl' subdirectoryYang Tse
when including the OpenSSL header files. This is the recommended setting, this prevents the undesired inclusion of header files with the same name as those of OpenSSL but which do not belong to the OpenSSL package. The visible change from previously released libcurl versions is that now OpenSSl enabled NetWare builds also define USE_OPENSSL in config files, and that OpenSSL header files must be located in a subdirectory named 'openssl'.
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 11:44:53 +0000