aboutsummaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2019-12-03configure: enable IPv6 support without `getaddrinfo`Marcel Raad
This makes it possible to recognize and connect to literal IPv6 addresses when `getaddrinfo` is not available, which is already the case for the CMake build. This affects e.g. classic MinGW because it still targets Windows 2000 by default, where `getaddrinfo` is not available, but general IPv6 support is. Instead of checking for `getaddrinfo`, check for `sockaddr_in6` as the CMake build does. Closes https://github.com/curl/curl/pull/4662
2019-11-26TLS: add BearSSL vtls implementationMichael Forney
Closes #4597
2019-11-08configure: fix typo in help textMassimiliano Fantuzzi HB9GUS
Closes https://github.com/curl/curl/pull/4570
2019-11-06configure: avoid unportable `==' test(1) operatorLeonardo Taccari
Closes https://github.com/curl/curl/pull/4567
2019-11-05configure: only say ipv6 enabled when the variable is setDaniel Stenberg
Previously it could say "IPv6: enabled" at the end of the configure run but the define wasn't set because of a missing getaddrinfo(). Reported-by: Marcel Raad Fixes #4555 Closes #4560
2019-10-18configure: remove all cyassl referencesDaniel Stenberg
In particular, this removes the case where configure would find an old cyall installation rather than a wolfssl one if present. The library is named wolfssl in modern days so there's no real need to keep support for the former. Reported-by: Jacob Barthelmeh Closes #4502
2019-10-02ESNI: initial build/setupNiall
Closes #4011
2019-08-27ngtcp2: Build with latest ngtcp2 and ngtcp2_crypto_opensslTatsuhiro Tsujikawa
Closes #4270
2019-08-20configure: use pkg-config to detect quicheAlessandro Ghedini
This removes the need to hard-code the quiche target path in configure.ac. This depends on https://github.com/cloudflare/quiche/pull/128 Closes #4237
2019-08-15configure: use -lquiche to link to quicheIgor Makarov
Closes #4226
2019-08-12nghttp3: required when ngtcp2 is used for QUICDaniel Stenberg
- checked for by configure - updated docs/HTTP3.md - shown in the version string Closes #4210
2019-08-11configure: avoid undefined check_for_ca_bundleCarlo Marcelo Arenas Belón
instead of using a "greater than 0" test, check for variable being set, as it is always set to 1, and could be left unset if non of OPENSSL MBEDTLS GNUTLS WOLFSSL is being configured for. Closes #4213
2019-07-21HTTP3: initial (experimental) supportDaniel Stenberg
USe configure --with-ngtcp2 or --with-quiche Using either option will enable a HTTP3 build. Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me> Closes #3500
2019-07-20curl: support parallel transfersDaniel Stenberg
This is done by making sure each individual transfer is first added to a linked list as then they can be performed serially, or at will, in parallel. Closes #3804
2019-07-14openssl: define HAVE_SSL_GET_SHUTDOWN based on version numberZenju
Closes #4100
2019-06-25configure: fix typo '--disable-http-uath'1ocalhost
Closes #4076
2019-06-18configure: --disable-progress-meterDaniel Stenberg
Builds libcurl without support for the built-in progress meter. Closes #4023
2019-06-11configure: remove CURL_DISABLE_TLS_SRPDaniel Stenberg
It isn't used by code so stop providing the define. Closes #4010
2019-06-11configure: more --disable switches to toggle off individual featuresDaniel Stenberg
... actual support in the code for disabling these has already landed. Closes #4009
2019-06-10wolfssl: refer to it as wolfSSL onlyDaniel Stenberg
Remove support for, references to and use of "cyaSSL" from the source and docs. wolfSSL is the current name and there's no point in keeping references to ancient history. Assisted-by: Daniel Gustafsson Closes #3903
2019-05-22PolarSSL: deprecate support step 1. Removed from configure.Daniel Stenberg
Also removed mentions from most docs. Discussed: https://curl.haxx.se/mail/lib-2019-05/0045.html Closes #3888
2019-05-22configure/cmake: check for if_nametoindex()Daniel Stenberg
- adds the check to cmake - fixes the configure check to work for cross-compiled windows builds Closes #3917
2019-05-21configure: detect getsockname and getpeername on windows tooDaniel Stenberg
Made detection macros for these two functions in the same style as other functions possibly in winsock in the hope this will work better to detect these functions when cross-compiling for Windows. Follow-up to e91e4816123 Fixes #3913 Closes #3915
2019-05-17libcurl: #ifdef away more code for disabled features/protocolsDaniel Stenberg
2019-05-14configure: error out if OpenSSL wasn't detected when asked forDaniel Stenberg
If --with-ssl is used and configure still couldn't enable SSL this creates an error instead of just silently ignoring the fact. Suggested-by: Isaiah Norton Fixes #3824 Closes #3830
2019-04-05configure: fix default location for fish completionsEli Schwartz
Fish defines a vendor completions directory for completions that are not installed as part of the fish project itself, and the vendor completions are preferred if they exist. This prevents trying to overwrite the builtin curl.fish completion (or creating file conflicts in distro packaging). Prefer the pkg-config defined location exported by fish, if it can be found, and fall back to the correct directory defined by most systems. Closes #3723 Reviewed-by: Daniel Gustafsson
2019-03-27configure: avoid unportable `==' test(1) operatorLeonardo Taccari
Closes #3709
2019-03-15configure: add --with-amisslChris Young
AmiSSL is an Amiga native library which provides a wrapper over OpenSSL. It also requires all programs using it to use bsdsocket.library directly, rather than accessing socket functions through clib, which libcurl was not necessarily doing previously. Configure will now check for the headers and ensure they are included if found. Closes #3677
2019-03-03alt-svc: the libcurl bitsDaniel Stenberg
2019-03-02scripts/completion.pl: also generate fish completion fileSimon Legner
This is the renamed script formerly known as zsh.pl Closes #3545
2019-02-28Secure Transport: no more "darwinssl"Daniel Stenberg
Everyone calls it Secure Transport, now we do too. Reviewed-by: Nick Zitzmann Closes #3619
2019-02-23configure: remove CURL_CHECK_FUNC_FDOPEN callMarcel Raad
The macro itself has been removed in commit 11974ac859c5d82def59e837e0db56fef7f6794e. Closes https://github.com/curl/curl/pull/3604
2019-02-23wolfssl: stop custom-adding curvesDaniel Stenberg
since wolfSSL PR https://github.com/wolfSSL/wolfssl/pull/717 (shipped in wolfSSL 3.10.2 and later) it sends these curves by default already. Pointed-out-by: David Garske Closes #3599
2019-02-14configure: show features as well in the final summaryDaniel Stenberg
Closes #3569
2019-02-01schannel: stop calling it "winssl"Daniel Stenberg
Stick to "Schannel" everywhere. The configure option --with-winssl is kept to allow existing builds to work but --with-schannel is added as an alias. Closes #3504
2019-01-26configure: rewrite --enable-code-coverageDaniel Stenberg
The previously used ax_code_coverage.m4 is not license compatible and must not be used. Reported-by: William A. Rowe Jr Fixes #3497 Closes #3499
2019-01-13openssl: adapt to 3.0.0, OpenSSL_version_num() is deprecatedDaniel Stenberg
OpenSSL_version() replaces OpenSSL_version_num() Closes #3462
2018-12-05packages: remove old leftover files and dirsDaniel Stenberg
This subdir has mostly become an attic of never-used cruft from the past. Closes #3331
2018-11-26configure: include all libraries in ssl-libs fetchJames Knight
When compiling a collection of SSL libraries to link against (SSL_LIBS), ensure all libraries are included. The call `--libs-only-l` can produce only a subset of found in a `--libs` call (e.x. pthread may be excluded). Adding `--libs-only-other` ensures other libraries are also included in the list. This corrects select build environments compiling against a static version of OpenSSL. Before the change, the following could be observed: checking for openssl options with pkg-config... found configure: pkg-config: SSL_LIBS: "-lssl -lz -ldl -lcrypto -lz -ldl " configure: pkg-config: SSL_LDFLAGS: "-L/home/jdknight/<workdir>/staging/usr/lib -L/home/jdknight/<workdir>/staging/usr/lib " configure: pkg-config: SSL_CPPFLAGS: "-I/home/jdknight/<workdir>/staging/usr/include " checking for HMAC_Update in -lcrypto... no checking for HMAC_Init_ex in -lcrypto... no checking OpenSSL linking with -ldl... no checking OpenSSL linking with -ldl and -lpthread... no configure: WARNING: SSL disabled, you will not be able to use HTTPS, FTPS, NTLM and more. configure: WARNING: Use --with-ssl, --with-gnutls, --with-polarssl, --with-cyassl, --with-nss, --with-axtls, --with-winssl, or --with-darwinssl to address this. ... SSL support: no (--with-{ssl,gnutls,nss,polarssl,mbedtls,cyassl,axtls,winssl,darwinssl} ) ... And include the other libraries when compiling SSL_LIBS succeeds with: checking for openssl options with pkg-config... found configure: pkg-config: SSL_LIBS: "-lssl -lz -ldl -pthread -lcrypto -lz -ldl -pthread " configure: pkg-config: SSL_LDFLAGS: "-L/home/jdknight/<workdir>/staging/usr/lib -L/home/jdknight/<workdir>/staging/usr/lib " configure: pkg-config: SSL_CPPFLAGS: "-I/home/jdknight/<workdir>/staging/usr/include " checking for HMAC_Update in -lcrypto... yes checking for SSL_connect in -lssl... yes ... SSL support: enabled (OpenSSL) ... Signed-off-by: James Knight <james.d.knight@live.com> Closes #3193
2018-11-21ssl: fix compilation with OpenSSL 0.9.7Michael Kaufmann
- ENGINE_cleanup() was used without including "openssl/engine.h" - enable engine support for OpenSSL 0.9.7 Closes #3266
2018-11-01configure: show CFLAGS, LDFLAGS etc in summaryDaniel Stenberg
To make it easier to understand other people's and remote builds etc. Closes #3207
2018-11-01axtls: removedDaniel Stenberg
As has been outlined in the DEPRECATE.md document, the axTLS code has been disabled for 6 months and is hereby removed. Use a better supported TLS library! Assisted-by: Daniel Gustafsson Closes #3194
2018-10-25configure: remove CURL_CONFIGURE_CURL_SOCKLEN_TDaniel Stenberg
Follow-up to #3166 which did the cmake part of this. This type/define is not used. Closes #3168
2018-09-23docs/examples: URL updatesViktor Szakats
- also update two URLs outside of docs/examples - fix spelling of filename persistant.c - fix three long lines that started failing checksrc.pl Closes https://github.com/curl/curl/pull/3036
2018-09-22URL and mailmap updates, remove an obsolete directory [ci skip]Viktor Szakats
Closes https://github.com/curl/curl/pull/3031
2018-09-21configure: force-use -lpthreads on HPUXDaniel Stenberg
When trying to detect pthreads use on HPUX the checks will succeed without the correct -l option but then end up failing at run-time. Reported-by: Eason-Yu on github Fixes #2697 Closes #3025
2018-09-13configure.ac: add a MesaLink vtls backendYiming Jing
2018-09-07configure: add option to disable automatic OpenSSL config loadingPhilipp Waehnert
Sometimes it may be considered a security risk to load an external OpenSSL configuration automatically inside curl_global_init(). The configuration option --disable-ssl-auto-load-config disables this automatism. The Windows build scripts winbuild/Makefile.vs provide a corresponding option ENABLE_SSL_AUTO_LOAD_CONFIG accepting a boolean value. Setting neither of these options corresponds to the previous behavior loading the external OpenSSL configuration automatically. Fixes #2724 Closes #2791
2018-08-21configure: conditionally enable pedantic-errorsMarcel Raad
Enable pedantic-errors for GCC >= 5 with --enable-werror. Before GCC 5, pedantic-errors was synonymous to -Werror=pedantic [0], which is still the case for clang [1]. With GCC 5, it became complementary [2]. Also fix a resulting error in acinclude.m4 as main's return type was missing, which is illegal in C99. [0] https://gcc.gnu.org/onlinedocs/gcc-4.9.0/gcc/Warning-Options.html [1] https://clang.llvm.org/docs/UsersManual.html#options-to-control-error-and-warning-messages [2] https://gcc.gnu.org/onlinedocs/gcc-5.1.0/gcc/Warning-Options.html Closes https://github.com/curl/curl/pull/2747
2018-08-09configure: fix for -lpthread detection with OpenSSL and pkg-configDaniel Stenberg
... by making sure it uses the -I provided by pkg-config! Reported-by: pszemus on github Fixes #2848 Closes #2850
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-03 00:26:02 +0000