aboutsummaryrefslogtreecommitdiff
path: root/configure.ac
AgeCommit message (Collapse)Author
2020-05-12libcurl.pc: Merge Libs.private into Libs for static-only buildsJames Le Cuirot
A project being built entirely statically will call pkg-config with --static, which utilises the Libs.private field. Conversely it will not use --static when not being built entirely statically, even if there is only a static build of libcurl available. This will most likely cause the build to fail due to underlinking unless we merge the Libs fields. Consider that this is what the Meson build system does when it generates pkg-config files. I have also reflected this in the --libs argument of curl-config even though REQUIRE_LIB_DEPS always seems to be "yes" anyway. Closes #5373
2020-05-05quiche: enable qlog outputDaniel Stenberg
quiche has the potential to log qlog files. To enable this, you must build quiche with the qlog feature enabled `cargo build --features qlog`. curl then passes a file descriptor to quiche, which takes ownership of the file. The FD transfer only works on UNIX. The convention is to enable logging when the QLOGDIR environment is set. This should be a path to a folder where files are written with the naming template <SCID>.qlog. Co-authored-by: Lucas Pardue Replaces #5337 Closes #5341
2020-04-21gnutls: bump lowest supported version to 3.1.10Daniel Stenberg
GnuTLS 3.1.10 added new functions we want to use. That version was released on Mar 22, 2013. Removing support for older versions also greatly simplifies the code. Ref: #5271 Closes #5276
2020-04-14mqtt: add new experimental protocolBjorn Stenberg
Closes #5173
2020-04-06configure: don't check for Security.framework when cross-compilingDennis Felsing
Since it checks for the local file, not the cross-compiled one. Closes #5189
2020-03-31vquic: add support for GnuTLS backend of ngtcp2Daiki Ueno
Currently, the TLS backend used by vquic/ngtcp2.c is selected at compile time. Therefore OpenSSL support needs to be explicitly disabled. Signed-off-by: Daiki Ueno <dueno@redhat.com> Closes #5148
2020-03-31build: fixed build for systems with select() in unistd.hHarry Sintonen
Closes #5169
2020-03-26openssl: adapt to functions marked as deprecated since version 3Daniel Stenberg
OpenSSL 3 deprecates SSL_CTX_load_verify_locations and the MD4, DES functions we use. Fix the MD4 and SSL_CTX_load_verify_locations warnings. In configure, detect OpenSSL v3 and if so, inhibit the deprecation warnings. OpenSSL v3 deprecates the DES functions we use for NTLM and until we rewrite the code to use non-deprecated functions we better ignore these warnings as they don't help us. Closes #5139
2020-03-11configure: convert -I to -isystem as a last stepDaniel Stenberg
As all the -I uses in CFLAGS at that point are for system headers and third party libraries this helps us remove/ignore warnings on those! Closes #5060
2020-03-11configure: fix -pedantic-errors for GCC 5 and laterDaniel Stenberg
If --enable-werror is used. Follow-up to d5c0351055d5709da which added it too early in the configure script before $compiler_num was set correctly and thus this option was never used. Reported-by: Stepan Efremov Fixes #5067 Closes #5068
2020-03-03configure.ac: Disable metalink if mbedTLS is specifiedSteve Holme
Follow up to cdcc9df1 and #5006. Even though I mentioned mbedTLS as being one of the backends that metalink needs to be disabled for, I seem to have included it in the list of allowed SSL/TLS backends in comnfigure.ac :( Closes #5013
2020-03-02configure: bump the AC_COPYRIGHT year rangeDaniel Stenberg
2020-03-01configure.ac: Disable metalink support if an incompatible SSL/TLS specifiedSteve Holme
tool_metalink only supports cryptography from OpenSSL, GnuTLS, NSS, The Win32 Crypto library and Apple's Common Crypto library. If an TLS backend such as mbedTLS or WolfSSL is specified then the following error is given during compilation along, with a load of unresolved extern errors: Can't compile METALINK support without a crypto library. Reviewed-by: Daniel Stenberg Closes #5006
2020-02-21http2: now require nghttp2 >= 1.12.0Daniel Stenberg
To simplify our code and since earlier versions lack important function calls libcurl needs to function correctly. nghttp2 1.12.0 was relased on June 26, 2016. Closes #4961
2020-02-08configure.ac: fix comments about --with-quicheCristian Greco
A simple s/nghttp3/quiche in some comments of --with-quiche. Looks like a copy-paste error from --with-nghttp3. Closes #4897
2020-01-12wolfSSH: new SSH backendDaniel Stenberg
Adds support for SFTP (not SCP) using WolfSSH. Closes #4231
2019-12-10azure: add libssh2 and cmake macos buildsDaniel Stenberg
Removed the macos libssh2 build from travis Closes #4686
2019-12-03configure: enable IPv6 support without `getaddrinfo`Marcel Raad
This makes it possible to recognize and connect to literal IPv6 addresses when `getaddrinfo` is not available, which is already the case for the CMake build. This affects e.g. classic MinGW because it still targets Windows 2000 by default, where `getaddrinfo` is not available, but general IPv6 support is. Instead of checking for `getaddrinfo`, check for `sockaddr_in6` as the CMake build does. Closes https://github.com/curl/curl/pull/4662
2019-11-26TLS: add BearSSL vtls implementationMichael Forney
Closes #4597
2019-11-08configure: fix typo in help textMassimiliano Fantuzzi HB9GUS
Closes https://github.com/curl/curl/pull/4570
2019-11-06configure: avoid unportable `==' test(1) operatorLeonardo Taccari
Closes https://github.com/curl/curl/pull/4567
2019-11-05configure: only say ipv6 enabled when the variable is setDaniel Stenberg
Previously it could say "IPv6: enabled" at the end of the configure run but the define wasn't set because of a missing getaddrinfo(). Reported-by: Marcel Raad Fixes #4555 Closes #4560
2019-10-18configure: remove all cyassl referencesDaniel Stenberg
In particular, this removes the case where configure would find an old cyall installation rather than a wolfssl one if present. The library is named wolfssl in modern days so there's no real need to keep support for the former. Reported-by: Jacob Barthelmeh Closes #4502
2019-10-02ESNI: initial build/setupNiall
Closes #4011
2019-08-27ngtcp2: Build with latest ngtcp2 and ngtcp2_crypto_opensslTatsuhiro Tsujikawa
Closes #4270
2019-08-20configure: use pkg-config to detect quicheAlessandro Ghedini
This removes the need to hard-code the quiche target path in configure.ac. This depends on https://github.com/cloudflare/quiche/pull/128 Closes #4237
2019-08-15configure: use -lquiche to link to quicheIgor Makarov
Closes #4226
2019-08-12nghttp3: required when ngtcp2 is used for QUICDaniel Stenberg
- checked for by configure - updated docs/HTTP3.md - shown in the version string Closes #4210
2019-08-11configure: avoid undefined check_for_ca_bundleCarlo Marcelo Arenas Belón
instead of using a "greater than 0" test, check for variable being set, as it is always set to 1, and could be left unset if non of OPENSSL MBEDTLS GNUTLS WOLFSSL is being configured for. Closes #4213
2019-07-21HTTP3: initial (experimental) supportDaniel Stenberg
USe configure --with-ngtcp2 or --with-quiche Using either option will enable a HTTP3 build. Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me> Closes #3500
2019-07-20curl: support parallel transfersDaniel Stenberg
This is done by making sure each individual transfer is first added to a linked list as then they can be performed serially, or at will, in parallel. Closes #3804
2019-07-14openssl: define HAVE_SSL_GET_SHUTDOWN based on version numberZenju
Closes #4100
2019-06-25configure: fix typo '--disable-http-uath'1ocalhost
Closes #4076
2019-06-18configure: --disable-progress-meterDaniel Stenberg
Builds libcurl without support for the built-in progress meter. Closes #4023
2019-06-11configure: remove CURL_DISABLE_TLS_SRPDaniel Stenberg
It isn't used by code so stop providing the define. Closes #4010
2019-06-11configure: more --disable switches to toggle off individual featuresDaniel Stenberg
... actual support in the code for disabling these has already landed. Closes #4009
2019-06-10wolfssl: refer to it as wolfSSL onlyDaniel Stenberg
Remove support for, references to and use of "cyaSSL" from the source and docs. wolfSSL is the current name and there's no point in keeping references to ancient history. Assisted-by: Daniel Gustafsson Closes #3903
2019-05-22PolarSSL: deprecate support step 1. Removed from configure.Daniel Stenberg
Also removed mentions from most docs. Discussed: https://curl.haxx.se/mail/lib-2019-05/0045.html Closes #3888
2019-05-22configure/cmake: check for if_nametoindex()Daniel Stenberg
- adds the check to cmake - fixes the configure check to work for cross-compiled windows builds Closes #3917
2019-05-21configure: detect getsockname and getpeername on windows tooDaniel Stenberg
Made detection macros for these two functions in the same style as other functions possibly in winsock in the hope this will work better to detect these functions when cross-compiling for Windows. Follow-up to e91e4816123 Fixes #3913 Closes #3915
2019-05-17libcurl: #ifdef away more code for disabled features/protocolsDaniel Stenberg
2019-05-14configure: error out if OpenSSL wasn't detected when asked forDaniel Stenberg
If --with-ssl is used and configure still couldn't enable SSL this creates an error instead of just silently ignoring the fact. Suggested-by: Isaiah Norton Fixes #3824 Closes #3830
2019-04-05configure: fix default location for fish completionsEli Schwartz
Fish defines a vendor completions directory for completions that are not installed as part of the fish project itself, and the vendor completions are preferred if they exist. This prevents trying to overwrite the builtin curl.fish completion (or creating file conflicts in distro packaging). Prefer the pkg-config defined location exported by fish, if it can be found, and fall back to the correct directory defined by most systems. Closes #3723 Reviewed-by: Daniel Gustafsson
2019-03-27configure: avoid unportable `==' test(1) operatorLeonardo Taccari
Closes #3709
2019-03-15configure: add --with-amisslChris Young
AmiSSL is an Amiga native library which provides a wrapper over OpenSSL. It also requires all programs using it to use bsdsocket.library directly, rather than accessing socket functions through clib, which libcurl was not necessarily doing previously. Configure will now check for the headers and ensure they are included if found. Closes #3677
2019-03-03alt-svc: the libcurl bitsDaniel Stenberg
2019-03-02scripts/completion.pl: also generate fish completion fileSimon Legner
This is the renamed script formerly known as zsh.pl Closes #3545
2019-02-28Secure Transport: no more "darwinssl"Daniel Stenberg
Everyone calls it Secure Transport, now we do too. Reviewed-by: Nick Zitzmann Closes #3619
2019-02-23configure: remove CURL_CHECK_FUNC_FDOPEN callMarcel Raad
The macro itself has been removed in commit 11974ac859c5d82def59e837e0db56fef7f6794e. Closes https://github.com/curl/curl/pull/3604
2019-02-23wolfssl: stop custom-adding curvesDaniel Stenberg
since wolfSSL PR https://github.com/wolfSSL/wolfssl/pull/717 (shipped in wolfSSL 3.10.2 and later) it sends these curves by default already. Pointed-out-by: David Garske Closes #3599
generated by cgit v1.2.3 (git 2.25.1) at 2024-12-03 23:27:33 +0000