aboutsummaryrefslogtreecommitdiff
path: root/docs/cmdline-opts
AgeCommit message (Collapse)Author
2019-03-01docs: update max-redirs.d phrasingԜеѕ
clarify redir - "in absurdum" doesn't seem to make sense in this context Closes #3631
2019-02-01schannel: stop calling it "winssl"Daniel Stenberg
Stick to "Schannel" everywhere. The configure option --with-winssl is kept to allow existing builds to work but --with-schannel is added as an alias. Closes #3504
2019-01-03docs/version.d: mention MultiSSLDaniel Stenberg
Reviewed-by: Daniel Gustafsson Closes #3432
2018-12-27hostip: support wildcard hostsClaes Jakobsson
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are try-last so any non-wildcard entry is resolved first. If specified, any host not matched by another CURLOPT_RESOLVE config will use this as fallback. Example send a.com to 10.0.0.1 and everything else to 10.0.0.2: curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \ https://a.com https://b.com This is probably quite similar to using: --connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443 Closes #3406 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-12-13docs: fix the --tls-max descriptionDaniel Stenberg
Reported-by: Tobias Lindgren Pointed out in #3367 Closes #3368
2018-11-26cmdline-opts/gen.pl: define the correct varnameDaniel Gustafsson
The variable definition had a small typo making it declare another variable then the intended. Closes #3304 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-11-07curl: add %{stderr} and %{stdout} for --write-outFrank Gevaerts
Closes #3115
2018-11-05netrc: don't ignore the login name specified with "--user"Michael Kaufmann
- for "--netrc", don't ignore the login/password specified with "--user", only ignore the login/password in the URL. This restores the netrc behaviour of curl 7.61.1 and earlier. - fix the documentation of CURL_NETRC_REQUIRED - improve the detection of login/password changes when reading .netrc - don't read .netrc if both login and password are already set Fixes #3213 Closes #3224
2018-10-26curl.1: --ipv6 mutexes ipv4 (fixed typo)Alexey Eremikhin
Fixes #3171 Closes #3172
2018-10-03data-binary.d: clarify default content-type is x-www-form-urlencodedJay Satiro
- Advise user that --data-binary sends a default content type of x-www-form-urlencoded, and to have the data treated as arbitrary binary data by the server set the content-type header to octet-stream. Ref: https://github.com/curl/curl/pull/2852#issuecomment-426465094 Closes https://github.com/curl/curl/pull/3085
2018-09-28cmake: fixed path used in generation of docs/tests during curl build through ↵Sergei Nikulov
add_subdicectory(...)
2018-09-23whitespace fixesViktor Szakats
- replace tabs with spaces where possible - remove line ending spaces - remove double/triple newlines at EOF - fix a non-UTF-8 character - cleanup a few indentations/line continuations in manual examples Closes https://github.com/curl/curl/pull/3037
2018-09-16curl: update --tlsv* descriptions in --help outputSi
Closes #2994
2018-09-10docs/cmdline-opts: update the documentation of --tlsv1.0Kamil Dudka
... to reflect the changes in 6015cefb1b2cfde4b4850121c42405275e5e77d9 Closes #2955
2018-09-06curl: --doh-url addedDaniel Stenberg
2018-09-03tool_operate: Add http code 408 to transient list for --retryJay Satiro
- Treat 408 request timeout as transient so that curl will retry the request if --retry was used. Closes #2925
2018-08-25cmdline-opts/page-footer: fix edit mistakeDaniel Stenberg
There was a missing newline. follow-up to a7ba60bb7250
2018-08-24docs: clarify NO_PROXY env variable functionalityDaniel Stenberg
Reported-by: Kirill Marchuk Fixes #2773 Closes #2911
2018-08-13docs: add disallow-username-in-url.d and haproxy-protocol.d on the listKamil Dudka
... to make make the files appear in distribution tarballs Closes #2856
2018-08-08ssl: set engine implicitly when a PKCS#11 URI is providedAnderson Toshiyuki Sasaki
This allows the use of PKCS#11 URI for certificates and keys without setting the corresponding type as "ENG" and the engine as "pkcs11" explicitly. If a PKCS#11 URI is provided for certificate, key, proxy_certificate or proxy_key, the corresponding type is set as "ENG" if not provided and the engine is set to "pkcs11" if not provided. Acked-by: Nikos Mavrogiannopoulos Closes #2333
2018-07-10post303.d: clarify that this is an RFC violationDaniel Stenberg
... and not the other way around, which this previously said. Reported-by: Vasiliy Faronov Fixes #2723 Closes #2726
2018-06-29openssl: make the requested TLS version the *minimum* wantedDaniel Stenberg
The code treated the set version as the *exact* version to require in the TLS handshake, which is not what other TLS backends do and probably not what most people expect either. Reported-by: Andreas Olsson Assisted-by: Gaurav Malhotra Fixes #2691 Closes #2694
2018-06-29openssl: allow TLS 1.3 by defaultDaniel Stenberg
Reported-by: Andreas Olsson Fixes #2692 Closes #2693
2018-06-05cmdline-opts/cert-type.d: mention "p12" as a recognized type as wellDaniel Stenberg
2018-05-31option: disallow username in URLBjörn Stenberg
Adds CURLOPT_DISALLOW_USERNAME_IN_URL and --disallow-username-in-url. Makes libcurl reject URLs with a username in them. Closes #2340
2018-05-29setopt: add TLS 1.3 ciphersuitesDaniel Stenberg
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS. curl: added --tls13-ciphers and --proxy-tls13-ciphers Fixes #2435 Reported-by: zzq1015 on github Closes #2607
2018-05-28cmdline-opts/gen.pl: warn if mutexes: or see-also: list non-existing optionsDaniel Stenberg
2018-05-28curl.1: Fix cmdline-opts reference errors.Frank Gevaerts
--data, --form, and --ntlm were declared to be mutually exclusive with non-existing options. --data and --form referred to --upload (which is short for --upload-file and therefore did work, so this one was merely a bit confusing), --ntlm referred to --negotiated instead of --negotiate. Closes #2612
2018-05-28docs: fix cmdline-opts metadata headers case consistency.Frank Gevaerts
Almost all headers start with an uppercase letter, but some didn't.
2018-05-21curl: added --styled-outputDaniel Stenberg
It is enabled by default, so --no-styled-output will switch off the detection/use of bold headers. Closes #2538
2018-05-18docs: mention HAproxy protocol "version 1"Aleks
...as there's also a version 2. Closes #2579
2018-04-23curl.1: clarify that options and URLs can be mixedDaniel Stenberg
Fixes #2515 Closes #2517
2018-04-23CURLOPT_SSLCERT.3: improve WinSSL-specific usage infoArchangel_SDY
Ref: https://github.com/curl/curl/pull/2376#issuecomment-381858780 Closes https://github.com/curl/curl/pull/2504
2018-04-21tool_help: clarify --max-time unit of time is secondsJay Satiro
Before: -m, --max-time <time> Maximum time allowed for the transfer After: -m, --max-time <seconds> Maximum time allowed for the transfer
2018-04-18schannel: add support for CURLOPT_CAINFODan McNulty
- Move verify_certificate functionality in schannel.c into a new file called schannel_verify.c. Additionally, some structure defintions from schannel.c have been moved to schannel.h to allow them to be used in schannel_verify.c. - Make verify_certificate functionality for Schannel available on all versions of Windows instead of just Windows CE. verify_certificate will be invoked on Windows CE or when the user specifies CURLOPT_CAINFO and CURLOPT_SSL_VERIFYPEER. - In verify_certificate, create a custom certificate chain engine that exclusively trusts the certificate store backed by the CURLOPT_CAINFO file. - doc updates of --cacert/CAINFO support for schannel - Use CERT_NAME_SEARCH_ALL_NAMES_FLAG when invoking CertGetNameString when available. This implements a TODO in schannel.c to improve handling of multiple SANs in a certificate. In particular, all SANs will now be searched instead of just the first name. - Update tool_operate.c to not search for the curl-ca-bundle.crt file when using Schannel to maintain backward compatibility. Previously, any curl-ca-bundle.crt file found in that search would have been ignored by Schannel. But, with CAINFO support, the file found by that search would have been used as the certificate store and could cause issues for any users that have curl-ca-bundle.crt in the search path. - Update url.c to not set the build time CURL_CA_BUNDLE if the selected SSL backend is Schannel. We allow setting CA location for schannel only when explicitly specified by the user via CURLOPT_CAINFO / --cacert. - Add new test cases 3000 and 3001. These test cases check that the first and last SAN, respectively, matches the connection hostname. New test certificates have been added for these cases. For 3000, the certificate prefix is Server-localhost-firstSAN and for 3001, the certificate prefix is Server-localhost-secondSAN. - Remove TODO 15.2 (Add support for custom server certificate validation), this commit addresses it. Closes https://github.com/curl/curl/pull/1325
2018-04-17docs: fix typosJakub Wilk
Closes https://github.com/curl/curl/pull/2503
2018-03-20cookie.d: mention that "-" as filename means stdinDaniel Stenberg
Reported-by: Dongliang Mu Fixes #2410
2018-03-17CURLOPT_HAPROXYPROTOCOL: support the HAProxy PROXY protocolLawrence Matthews
Add --haproxy-protocol for the command line tool Closes #2162
2018-03-15user-agent.d:: mention --proxy-header as wellDaniel Stenberg
Bug: https://github.com/curl/curl/issues/2381
2018-03-04curl.1: mention how to add numerical IP addresses in NO_PROXYDaniel Stenberg
2018-02-23spelling fixesViktor Szakats
Detected using the `codespell` tool. Also contains one URL protocol upgrade. Closes https://github.com/curl/curl/pull/2334
2018-02-22form.d: rephrased somewhat, added two example command linesDaniel Stenberg
2018-02-20url: Add option CURLOPT_HAPPY_EYEBALLS_TIMEOUTAnders Bakken
- Add new option CURLOPT_HAPPY_EYEBALLS_TIMEOUT to set libcurl's happy eyeball timeout value. - Add new optval macro CURL_HET_DEFAULT to represent the default happy eyeballs timeout value (currently 200 ms). - Add new tool option --happy-eyeballs-timeout-ms to expose CURLOPT_HAPPY_EYEBALLS_TIMEOUT. The -ms suffix is used because the other -timeout options in the tool expect seconds not milliseconds. Closes https://github.com/curl/curl/pull/2260
2018-02-20CURLOPT_RESOLVE: Add support for multiple IP addresses per entryAnders Bakken
This enables users to preresolve but still take advantage of happy eyeballs and trying multiple addresses if some are not connecting. Ref: https://github.com/curl/curl/pull/2260
2018-02-12tlsauthtype.d: works only if libcurl is built with TLS-SRP supportKamil Dudka
Bug: https://bugzilla.redhat.com/1542256 Closes #2306
2018-01-30progress-bar.d: update to match implementationDaniel Stenberg
... since commit 993dd5651a6 Reported-by: Martin Dreher Bug: https://github.com/curl/curl/pull/2242#issuecomment-361059228 Closes #2271
2018-01-30curl: add --proxy-pinnedpubkeyDaniel Stenberg
To verify a proxy's public key. For when using HTTPS proxies. Fixes #2192 Closes #2268
2018-01-07scripts: allow all perl scripts to be run directlyJay Satiro
- Enable execute permission (chmod +x) - Change interpreter to /usr/bin/env perl Closes https://github.com/curl/curl/pull/2222
2018-01-07mail-rcpt.d: fix short-text descriptionJay Satiro
generated by cgit v1.2.3 (git 2.25.1) at 2024-07-02 22:26:02 +0000