aboutsummaryrefslogtreecommitdiff
path: root/docs/cmdline-opts
AgeCommit message (Collapse)Author
2019-08-08CURLOPT_HTTP_VERSION: seting this to 3 forces HTTP/3 use directlyDaniel Stenberg
Even though it cannot fall-back to a lower HTTP version automatically. The safer way to upgrade remains via CURLOPT_ALTSVC. CURLOPT_H3 no longer has any bits that do anything and might be removed before we remove the experimental label. Updated the curl tool accordingly to use "--http3". Closes #4197
2019-08-07curl: make use of CURLINFO_RETRY_AFTER when retryingDaniel Stenberg
If a Retry-After: header was used in the response, that value overrides other retry timing options. Fixes #3794 Closes #4195
2019-08-06curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the toolSteve Holme
Ref: https://github.com/curl/curl/issues/3653 Ref: https://github.com/curl/curl/pull/3790 NOTE: This commit was cherry-picked and is part of a series of commits that added the authzid feature for upcoming 7.66.0. The series was temporarily reverted in db8ec1f so that it would not ship in a 7.65.x patch release. Closes https://github.com/curl/curl/pull/4186
2019-08-06http09: disable HTTP/0.9 by default in both tool and libraryDaniel Stenberg
As the plan has been laid out in DEPRECATED. Update docs accordingly and verify in test 1174. Now requires the option to be set to allow HTTP/0.9 responses. Closes #4191
2019-07-21HTTP3: initial (experimental) supportDaniel Stenberg
USe configure --with-ngtcp2 or --with-quiche Using either option will enable a HTTP3 build. Co-authored-by: Alessandro Ghedini <alessandro@ghedini.me> Closes #3500
2019-07-20curl: support parallel transfersDaniel Stenberg
This is done by making sure each individual transfer is first added to a linked list as then they can be performed serially, or at will, in parallel. Closes #3804
2019-07-17docs: Explain behavior change in --tlsv1. options since 7.54Jay Satiro
Since 7.54 --tlsv1. options use the specified version or later, however older versions of curl documented it as using just the specified version which may or may not have happened depending on the TLS library. Document this discrepancy to allay confusion for users familiar with the old documentation that expect just the specified version. Fixes https://github.com/curl/curl/issues/4097 Closes https://github.com/curl/curl/pull/4119
2019-07-17libcurl: Restrict redirect schemes (follow-up)Jay Satiro
- Allow FTPS on redirect. - Update default allowed redirect protocols in documentation. Follow-up to 6080ea0. Ref: https://github.com/curl/curl/pull/4094 Closes https://github.com/curl/curl/pull/4115
2019-07-15docs: Fix missing lines caused by undefined macrosBjarni Ingi Gislason
- Escape apostrophes at line start. Some lines begin with a "'" (apostrophe, single quote), which is then interpreted as a control character in *roff. Such lines are interpreted as being a call to a macro, and if undefined, the lines are removed from the output. Bug: https://bugs.debian.org/926352 Signed-off-by: Bjarni Ingi Gislason <bjarniig@rhi.hi.is> Submitted-by: Alessandro Ghedini Closes https://github.com/curl/curl/pull/4111
2019-07-04doh-url.d: added in 7.62.0Daniel Stenberg
2019-06-13quote.d: asterisk prefix works for SFTP as wellDaniel Stenberg
Reported-by: Ben Voris Fixes #4017 Closes #4019
2019-06-10wolfssl: refer to it as wolfSSL onlyDaniel Stenberg
Remove support for, references to and use of "cyaSSL" from the source and docs. wolfSSL is the current name and there's no point in keeping references to ancient history. Assisted-by: Daniel Gustafsson Closes #3903
2019-06-02tls13-docs: mention it is only for OpenSSL >= 1.1.1Daniel Stenberg
Reported-by: Jay Satiro Co-authored-by: Jay Satiro Fixes #3938 Closes #3946
2019-06-01dump-header.d: spell out that no headers == empty file [ci skip]Daniel Stenberg
Reported-by: wesinator at github Fixes #3964 Closes #3974
2019-05-25Revert all SASL authzid (new feature) commitsJay Satiro
- Revert all commits related to the SASL authzid feature since the next release will be a patch release, 7.65.1. Prior to this change CURLOPT_SASL_AUTHZID / --sasl-authzid was destined for the next release, assuming it would be a feature release 7.66.0. However instead the next release will be a patch release, 7.65.1 and will not contain any new features. After the patch release after the reverted commits can be restored by using cherry-pick: git cherry-pick a14d72c a9499ff 8c1cc36 c2a8d52 0edf690 Details for all reverted commits: Revert "os400: take care of CURLOPT_SASL_AUTHZID in curl_easy_setopt_ccsid()." This reverts commit 0edf6907ae37e2020722e6f61229d8ec64095b0a. Revert "tests: Fix the line endings for the SASL alt-auth tests" This reverts commit c2a8d52a1356a722ff9f4aeb983cd4eaf80ef221. Revert "examples: Added SASL PLAIN authorisation identity (authzid) examples" This reverts commit 8c1cc369d0c7163c6dcc91fd38edfea1f509ae75. Revert "curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the tool" This reverts commit a9499ff136d89987af885e2d7dff0a066a3e5817. Revert "sasl: Implement SASL authorisation identity via CURLOPT_SASL_AUTHZID" This reverts commit a14d72ca2fec5d4eb5a043936e4f7ce08015c177.
2019-05-22curl: --sasl-authzid added to support CURLOPT_SASL_AUTHZID from the toolSteve Holme
2019-05-22PolarSSL: deprecate support step 1. Removed from configure.Daniel Stenberg
Also removed mentions from most docs. Discussed: https://curl.haxx.se/mail/lib-2019-05/0045.html Closes #3888
2019-04-08config.d: clarify that initial : and = might need quoting [skip ci]Daniel Stenberg
Fixes #3738 Closes #3749
2019-04-03documentation: Fix several typosTim Rühsen
Closes #3724 Reviewed-by: Jakub Zakrzewski Reviewed-by: Daniel Gustafsson
2019-03-14curl.1: --user and --proxy-user are hidden from ps outputDaniel Stenberg
Suggested-by: Eric Curtin Improved-by: Dan Fandrich Ref: #3680 Closes #3683
2019-03-14curl.1: mark the argument to --cookie as <data|filename>Daniel Stenberg
From a discussion in #3676 Suggested-by: Tim Rühsen Closes #3682
2019-03-08cmdline-opts/proxytunnel.d: the option tunnnels all protocolsDaniel Stenberg
Clarify the language and simplify. Reported-by: Daniel Lublin Closes #3658
2019-03-03alt-svc: the curl command line bitsDaniel Stenberg
2019-03-01docs: update max-redirs.d phrasingԜеѕ
clarify redir - "in absurdum" doesn't seem to make sense in this context Closes #3631
2019-02-01schannel: stop calling it "winssl"Daniel Stenberg
Stick to "Schannel" everywhere. The configure option --with-winssl is kept to allow existing builds to work but --with-schannel is added as an alias. Closes #3504
2019-01-03docs/version.d: mention MultiSSLDaniel Stenberg
Reviewed-by: Daniel Gustafsson Closes #3432
2018-12-27hostip: support wildcard hostsClaes Jakobsson
This adds support for wildcard hosts in CURLOPT_RESOLVE. These are try-last so any non-wildcard entry is resolved first. If specified, any host not matched by another CURLOPT_RESOLVE config will use this as fallback. Example send a.com to 10.0.0.1 and everything else to 10.0.0.2: curl --resolve *:443:10.0.0.2 --resolve a.com:443:10.0.0.1 \ https://a.com https://b.com This is probably quite similar to using: --connect-to a.com:443:10.0.0.1:443 --connect-to :443:10.0.0.2:443 Closes #3406 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-12-21http: added options for allowing HTTP/0.9 responsesDaniel Stenberg
Added CURLOPT_HTTP09_ALLOWED and --http0.9 for this purpose. For now, both the tool and library allow HTTP/0.9 by default. docs/DEPRECATE.md lays out the plan for when to reverse that default: 6 months after the 7.64.0 release. The options are added already now so that applications/scripts can start using them already now. Fixes #2873 Closes #3383
2018-12-13docs: fix the --tls-max descriptionDaniel Stenberg
Reported-by: Tobias Lindgren Pointed out in #3367 Closes #3368
2018-11-26cmdline-opts/gen.pl: define the correct varnameDaniel Gustafsson
The variable definition had a small typo making it declare another variable then the intended. Closes #3304 Reviewed-by: Daniel Stenberg <daniel@haxx.se>
2018-11-07curl: add %{stderr} and %{stdout} for --write-outFrank Gevaerts
Closes #3115
2018-11-05netrc: don't ignore the login name specified with "--user"Michael Kaufmann
- for "--netrc", don't ignore the login/password specified with "--user", only ignore the login/password in the URL. This restores the netrc behaviour of curl 7.61.1 and earlier. - fix the documentation of CURL_NETRC_REQUIRED - improve the detection of login/password changes when reading .netrc - don't read .netrc if both login and password are already set Fixes #3213 Closes #3224
2018-10-26curl.1: --ipv6 mutexes ipv4 (fixed typo)Alexey Eremikhin
Fixes #3171 Closes #3172
2018-10-03data-binary.d: clarify default content-type is x-www-form-urlencodedJay Satiro
- Advise user that --data-binary sends a default content type of x-www-form-urlencoded, and to have the data treated as arbitrary binary data by the server set the content-type header to octet-stream. Ref: https://github.com/curl/curl/pull/2852#issuecomment-426465094 Closes https://github.com/curl/curl/pull/3085
2018-09-28cmake: fixed path used in generation of docs/tests during curl build through ↵Sergei Nikulov
add_subdicectory(...)
2018-09-23whitespace fixesViktor Szakats
- replace tabs with spaces where possible - remove line ending spaces - remove double/triple newlines at EOF - fix a non-UTF-8 character - cleanup a few indentations/line continuations in manual examples Closes https://github.com/curl/curl/pull/3037
2018-09-16curl: update --tlsv* descriptions in --help outputSi
Closes #2994
2018-09-10docs/cmdline-opts: update the documentation of --tlsv1.0Kamil Dudka
... to reflect the changes in 6015cefb1b2cfde4b4850121c42405275e5e77d9 Closes #2955
2018-09-06curl: --doh-url addedDaniel Stenberg
2018-09-03tool_operate: Add http code 408 to transient list for --retryJay Satiro
- Treat 408 request timeout as transient so that curl will retry the request if --retry was used. Closes #2925
2018-08-25cmdline-opts/page-footer: fix edit mistakeDaniel Stenberg
There was a missing newline. follow-up to a7ba60bb7250
2018-08-24docs: clarify NO_PROXY env variable functionalityDaniel Stenberg
Reported-by: Kirill Marchuk Fixes #2773 Closes #2911
2018-08-13docs: add disallow-username-in-url.d and haproxy-protocol.d on the listKamil Dudka
... to make make the files appear in distribution tarballs Closes #2856
2018-08-08ssl: set engine implicitly when a PKCS#11 URI is providedAnderson Toshiyuki Sasaki
This allows the use of PKCS#11 URI for certificates and keys without setting the corresponding type as "ENG" and the engine as "pkcs11" explicitly. If a PKCS#11 URI is provided for certificate, key, proxy_certificate or proxy_key, the corresponding type is set as "ENG" if not provided and the engine is set to "pkcs11" if not provided. Acked-by: Nikos Mavrogiannopoulos Closes #2333
2018-07-10post303.d: clarify that this is an RFC violationDaniel Stenberg
... and not the other way around, which this previously said. Reported-by: Vasiliy Faronov Fixes #2723 Closes #2726
2018-06-29openssl: make the requested TLS version the *minimum* wantedDaniel Stenberg
The code treated the set version as the *exact* version to require in the TLS handshake, which is not what other TLS backends do and probably not what most people expect either. Reported-by: Andreas Olsson Assisted-by: Gaurav Malhotra Fixes #2691 Closes #2694
2018-06-29openssl: allow TLS 1.3 by defaultDaniel Stenberg
Reported-by: Andreas Olsson Fixes #2692 Closes #2693
2018-06-05cmdline-opts/cert-type.d: mention "p12" as a recognized type as wellDaniel Stenberg
2018-05-31option: disallow username in URLBjörn Stenberg
Adds CURLOPT_DISALLOW_USERNAME_IN_URL and --disallow-username-in-url. Makes libcurl reject URLs with a username in them. Closes #2340
2018-05-29setopt: add TLS 1.3 ciphersuitesDaniel Stenberg
Adds CURLOPT_TLS13_CIPHERS and CURLOPT_PROXY_TLS13_CIPHERS. curl: added --tls13-ciphers and --proxy-tls13-ciphers Fixes #2435 Reported-by: zzq1015 on github Closes #2607
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-02 18:33:53 +0000