aboutsummaryrefslogtreecommitdiff
path: root/docs/libcurl/opts
AgeCommit message (Collapse)Author
2016-09-18CURLOPT_PINNEDPUBLICKEY.3: fix the AVAILABILITY formattingJay Satiro
2016-09-04speed caps: not based on average speeds anymoreOlivier Brunel
Speed limits (from CURLOPT_MAX_RECV_SPEED_LARGE & CURLOPT_MAX_SEND_SPEED_LARGE) were applied simply by comparing limits with the cumulative average speed of the entire transfer; While this might work at times with good/constant connections, in other cases it can result to the limits simply being "ignored" for more than "short bursts" (as told in man page). Consider a download that goes on much slower than the limit for some time (because bandwidth is used elsewhere, server is slow, whatever the reason), then once things get better, curl would simply ignore the limit up until the average speed (since the beginning of the transfer) reached the limit. This could prove the limit useless to effectively avoid using the entire bandwidth (at least for quite some time). So instead, we now use a "moving starting point" as reference, and every time at least as much as the limit as been transferred, we can reset this starting point to the current position. This gets a good limiting effect that applies to the "current speed" with instant reactivity (in case of sudden speed burst). Closes #971
2016-09-01CURLMOPT_PIPELINING.3: languageDaniel Stenberg
2016-09-01CURLMOPT_PIPELINING.3: extended and clarifiedDaniel Stenberg
Especially in regards to the multiplexing part.
2016-08-28darwinssl: add documentation stating that the --cainfo option is intended ↵Nick Zitzmann
for backward compatibility only In other news, I changed one other reference to "Mac OS X" in the documentation (that I previously wrote) to say "macOS" instead.
2016-08-19CURLMOPT_MAX_TOTAL_CONNECTIONS.3: mention it can also multiplexDaniel Stenberg
2016-08-15CURLOPT_PROXY.3: unsupported schemes cause errors nowDaniel Stenberg
Follow-up to a96319ebb9 (document the new behavior)
2016-08-05CURLOPT_TCP_NODELAY: now enabled by defaultDaniel Stenberg
After a few wasted hours hunting down the reason for slowness during a TLS handshake that turned out to be because of TCP_NODELAY not being set, I think we have enough motivation to toggle the default for this option. We now enable TCP_NODELAY by default and allow applications to switch it off. This also makes --tcp-nodelay unnecessary, but --no-tcp-nodelay can be used to disable it. Thanks-to: Tim Rühsen Bug: https://curl.haxx.se/mail/lib-2016-06/0143.html
2016-07-21docs: distribute the CURLINFO_HTTP_VERSION(3) man page, tooKamil Dudka
2016-07-14CURLMOPT_SOCKETFUNCTION.3: fix typoTimothy Polich
Closes https://github.com/curl/curl/pull/914
2016-06-11CURLOPT_POSTFIELDS.3: Clarify what happens when set emptyJay Satiro
When CURLOPT_POSTFIELDS is set to an empty string libcurl will send a zero-byte POST. Prior to this change it was documented as sending data from the read callback. This also changes the wording of what happens when empty or NULL so that it's hopefully easier to understand for people whose primary language isn't English. Bug: https://github.com/curl/curl/issues/862 Reported-by: Askar Safin
2016-06-01schannel: add CURLOPT_CERTINFO supportAndrew Kurushin
Closes #822
2016-05-30http: add CURLINFO_HTTP_VERSION and %{http_version}Frank Gevaerts
Adds access to the effectively used http version to both libcurl and curl. Closes #799
2016-05-20CURLOPT_CONNECT_TO.3: user must not free the list prematurelyMichael Kaufmann
The connect-to list isn't copied so as long as the handle may be used for a transfer the list must be valid. Bug: https://github.com/curl/curl/pull/819 Reported-by: Michael Kaufmann
2016-05-17CURLOPT_RESOLVE.3: fix typoFrank Gevaerts
Closes #811
2016-05-17docs: CURLOPT_RESOLVE overrides CURLOPT_IPRESOLVEDaniel Stenberg
2016-05-17CURLOPT_HTTPPOST.3: the data needs to be around while in useDaniel Stenberg
2016-05-02docs: unified man page references to use \fIDaniel Stenberg
2016-05-01CURLOPT_ACCEPT_ENCODING.3: Follow-up clarificationIsaac Boukris
Mention possible content-length mismatch with sum of bytes reported by write callbacks when auto decoding is enabled. See #785
2016-05-01CURLOPT_CONV_TO_NETWORK_FUNCTION.3: fix bad man page referenceDaniel Stenberg
2016-05-01CURLOPT_BUFFERSIZE.3: fix reference to CURLOPT_MAX_RECV_SPEED_LARGEDaniel Stenberg
2016-05-01opts: fix broken/bad referencesDaniel Stenberg
2016-05-01docs: fix bugs in CURLOPT_HTTP_VERSION.3 and CURLOPT_PIPEWAIT.3Michael Kaufmann
Closes #786
2016-05-01CURLOPT_ACCEPT_ENCODING.3: clarifiedDaniel Stenberg
As discussed in #785
2016-04-28CURLINFO_TLS_SSL_PTR.3: Clarify SSL pointer availabilityJay Satiro
Bug: https://curl.haxx.se/mail/lib-2016-04/0126.html Reported-by: Bru Rom
2016-04-28mbedtls: Fix session resumeJay Satiro
This also fixes PolarSSL session resume. Prior to this change the TLS session information wasn't properly saved and restored for PolarSSL and mbedTLS. Bug: https://curl.haxx.se/mail/lib-2016-01/0070.html Reported-by: Thomas Glanzmann Bug: https://curl.haxx.se/mail/lib-2016-04/0095.html Reported-by: Moti Avrahami
2016-04-27opts: Fix some syntax errors in example code fragmentsMichael Kaufmann
Fixes #779
2016-04-26CURLINFO_TLS_SESSION.3: clarify TLS library support before 7.48.0Daniel Stenberg
2016-04-24PolarSSL: Implement public key pinningmoparisthebest
2016-04-19opts/Makefile.am: list all docs file one by oneDaniel Stenberg
... to make it easier to add lines in patches that won't just break all other patches trying to add lines too.
2016-04-18connect: implement TCP Fast Open for LinuxAlessandro Ghedini
Closes #660
2016-04-18url: add CURLOPT_TCP_FASTOPEN optionAlessandro Ghedini
2016-04-18opts: fix option references missing (section)Daniel Stenberg
2016-04-17news: CURLOPT_CONNECT_TO and --connect-toMichael Kaufmann
Makes curl connect to the given host+port instead of the host+port found in the URL.
2016-04-09CURLOPT_SOCKS5_GSSAPI_SERVICE: Merged with CURLOPT_PROXY_SERVICE_NAMESteve Holme
As these two options provide identical functionality, the former for SOCK5 proxies and the latter for HTTP proxies, merged the two options together. As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of 7.49.0.
2016-04-08docs: Added clarification following commit 9d89a0387Steve Holme
2016-04-08ftp/imap/pop3/smtp: Allow the service name to be overriddenSteve Holme
Allow the service name to be overridden for DIGIST-MD5 and Kerberos 5 authentication in FTP, IMAP, POP3 and SMTP.
2016-04-06URLs: change http to https in many placesViktor Szakats
Closes #754
2016-04-03code: style updatesDaniel Stenberg
2016-03-31http2: more documentation for prior knowledgeDaniel Stenberg
2016-03-29build: use roffit 0.11 featureDaniel Stenberg
... load file specified as argument.
2016-03-27CURLMOPT_SOCKETFUNCTION.3: describe the 'what' argumentDaniel Stenberg
2016-03-27docs: curlinfo_filetime sftp support, new curlopt_quote "statvfs"marquis-de-muesli
Closes #677
2016-03-23CURLINFO_TLS_SSL_PTR.3: Warn about limitationsJay Satiro
Bug: https://github.com/curl/curl/issues/685
2016-03-22CURLINFO_TLS_SSL_PTR.3: minor nroff format fixDaniel Stenberg
2016-03-15CURLOPT_SSLENGINE.3: Only for OpenSSL built with engine supportJay Satiro
Bug: https://curl.haxx.se/mail/lib-2016-03/0150.html Reported-by: Oliver Graute
2016-03-08opt-docs: fix heading macrosJay Satiro
..SH should be .SH Bug: https://github.com/curl/curl/issues/705 Reported-by: Eric S. Raymond
2016-03-06CURLOPT_ACCEPTTIMEOUT_MS.3: added exampleDaniel Stenberg
2016-03-06CURLOPT_ACCEPT_ENCODING.3: added exampleDaniel Stenberg
2016-03-06CURLOPT_APPEND.3: added exampleDaniel Stenberg