aboutsummaryrefslogtreecommitdiff
path: root/docs/libcurl/symbols-in-versions
AgeCommit message (Collapse)Author
2015-04-28Negotiate: custom service names for SPNEGO.Linus Nielsen
* Add new options, CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME. * Add new curl options, --proxy-service-name and --service-name.
2015-03-24symbols-in-versions: added CURLOPT_PATH_AS_ISDan Fandrich
2015-03-20url: add CURLOPT_SSL_FALSESTART optionAlessandro Ghedini
This option can be used to enable/disable TLS False Start defined in the RFC draft-bmoeller-tls-falsestart.
2015-01-16url: add CURLOPT_SSL_VERIFYSTATUS optionAlessandro Ghedini
This option can be used to enable/disable certificate status verification using the "Certificate Status Request" TLS extension defined in RFC6066 section 8. This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the certificate status verification fails, and the Curl_ssl_cert_status_request() function, used to check whether the SSL backend supports the status_request extension.
2014-12-04libcurl: add UNIX domain sockets supportPeter Wu
The ability to do HTTP requests over a UNIX domain socket has been requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a discussion happened, no patch seems to get through. I decided to give it a go since I need to test a nginx HTTP server which listens on a UNIX domain socket. One patch [3] seems to make it possible to use the CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket. Another person wrote a Go program which can do HTTP over a UNIX socket for Docker[4] which uses a special URL scheme (though the name contains cURL, it has no relation to the cURL library). This patch considers support for UNIX domain sockets at the same level as HTTP proxies / IPv6, it acts as an intermediate socket provider and not as a separate protocol. Since this feature affects network operations, a new feature flag was added ("unix-sockets") with a corresponding CURL_VERSION_UNIX_SOCKETS macro. A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This option enables UNIX domain sockets support for all requests on the handle (replacing IP sockets and skipping proxies). A new configure option (--enable-unix-sockets) and CMake option (ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I deliberately did not mark this feature as advanced, this is a feature/component that should easily be available. [0]: http://curl.haxx.se/mail/lib-2008-04/0279.html [1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/ [2]: http://sourceforge.net/p/curl/feature-requests/53/ [3]: http://curl.haxx.se/mail/lib-2008-04/0361.html [4]: https://github.com/Soulou/curl-unix-socket Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-29smb: Added SMB protocol and port definitionsBill Nagel
Added the necessary protocol and port definitions in order to support SMB/CIFS.
2014-11-07version info: Added Kerberos V5 to the supported featuresSteve Holme
2014-11-02CURL_VERSION_KERBEROS4: Mark as deprecatedSteve Holme
Support for Kerberos V4 was removed in v7.33.0.
2014-10-13vtls: remove QsoSSLPatrick Monnerat
2014-10-07SSL: implement public key pinningmoparisthebest
Option --pinnedpubkey takes a path to a public key in DER format and only connect if it matches (currently only implemented with OpenSSL). Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt(). Extract a public RSA key from a website like so: openssl s_client -connect google.com:443 2>&1 < /dev/null | \ sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \ | openssl rsa -pubin -outform DER > google.com.der
2014-08-09docs: Update SPNEGO and GSS-API related doc sectionsMichael Osipov
Reflect recent changes in SPNEGO and GSS-API code in the docs. Update them with appropriate namings and remove visible spots for GSS-Negotiate.
2014-07-31ssl: generalize how the ssl backend identifier is setDaniel Stenberg
Each backend now defines CURL_SSL_BACKEND accordingly. Added the *AXTLS one which was missing previously.
2014-07-24symbols: CURL_VERSION_GSSNEGOTIATE is deprecatedDaniel Stenberg
2014-07-23http2: more and better error checkingDaniel Stenberg
1 - fixes the warnings when built without http2 support 2 - adds CURLE_HTTP2, a new error code for errors detected by nghttp2 basically when they are about http2 specific things.
2014-07-23symbols-in-versions: new SPNEGO/GSS-API symbols in 7.38.0Daniel Stenberg
2014-04-04docs: this is for 7.37.0Daniel Stenberg
And clarify for curl that --proxy-header now must be used for headers that are meant for a proxy, and they will not be included if the request is not for a proxy.
2014-04-04symbols-in-versions: Added CURLHEADER_*Daniel Stenberg
... and sorted the list
2014-04-04CURLOPT_HEADEROPT: addedDaniel Stenberg
Modified the logic so that CURLOPT_HEADEROPT now controls if PROXYHEADER is actually used or not.
2014-04-04CURLOPT_PROXYHEADER: set headers for proxy-onlyDaniel Stenberg
Includes docs and new test cases: 1525, 1526 and 1527 Co-written-by: Vijay Panghal
2014-02-13transfer: make Expect: 100-continue timeout configurable.Tiit Pikma
Replaced the #define CURL_TIMEOUT_EXPECT_100 in transfer.c with the CURLOPT_EXPECT_100_TIMEOUT_MS option to make the timeout configurable.
2014-02-10NPN/ALPN: allow disabling via command lineFabian Frank
when using --http2 one can now selectively disable NPN or ALPN with --no-alpn and --no-npn. for now honored with NSS only. TODO: honor this option with GnuTLS and OpenSSL
2013-12-14login options: remove the ;[options] support from CURLOPT_USERPWDDaniel Stenberg
To avoid the regression when users pass in passwords containing semi- colons, we now drop the ability to set the login options with the same options. Support for login options in CURLOPT_USERPWD was added in 7.31.0. Test case 83 was modified to verify that colons and semi-colons can be used as part of the password when using -u (CURLOPT_USERPWD). Bug: http://curl.haxx.se/bug/view.cgi?id=1311 Reported-by: Petr Bahula Assisted-by: Steve Holme Signed-off-by: Daniel Stenberg <daniel@haxx.se>
2013-11-22symbols-in-versions: Added missing CURLSSLBACKEND_* symbolsSteve Holme
2013-11-22symbols-in-versions: Fixed missing CURLINFO_TLS_SESSIONSteve Holme
2013-11-12curl_easy_setopt: Added the ability to set the login options separatelySteve Holme
Rather than set the authentication options as part of the login details specified in the URL, or via the older CURLOPT_USERPWD option, added a new libcurl option to allow the login options to be set separately.
2013-10-16SSL: Corrected version number for new symbols from commit ad34a2d5c87c7fSteve Holme
2013-10-15SSL: protocol version can be specified more preciselyGergely Nagy
CURL_SSLVERSION_TLSv1_0, CURL_SSLVERSION_TLSv1_1, CURL_SSLVERSION_TLSv1_2 enum values are added to force exact TLS version (CURL_SSLVERSION_TLSv1 means TLS 1.x). axTLS: axTLS only supports TLS 1.0 and 1.1 but it cannot be set that only one of these should be used, so we don't allow the new enum values. darwinssl: Added support for the new enum values. SChannel: Added support for the new enum values. CyaSSL: Added support for the new enum values. Bug: The original CURL_SSLVERSION_TLSv1 value enables only TLS 1.0 (it did the same before this commit), because CyaSSL cannot be configured to use TLS 1.0-1.2. GSKit: GSKit doesn't seem to support TLS 1.1 and TLS 1.2, so we do not allow those values. Bugfix: There was a typo that caused wrong SSL versions to be passed to GSKit. NSS: TLS minor version cannot be set, so we don't allow the new enum values. QsoSSL: TLS minor version cannot be set, so we don't allow the new enum values. OpenSSL: Added support for the new enum values. Bugfix: The original CURL_SSLVERSION_TLSv1 value enabled only TLS 1.0, now it enables 1.0-1.2. Command-line tool: Added command line options for the new values.
2013-09-12libcurl: New options to bind DNS to local interfaces or IP addressesKim Vandry
2013-09-05symbols: added HTTP2 symbols and sorted listDaniel Stenberg
CURL_HTTP_VERSION_2_0 and CURL_VERSION_HTTP2 are new
2013-08-28symbols-in-versions: add CURLOPT_XOAUTH2_BEARERDaniel Stenberg
2013-08-20CURLM_ADDED_ALREADY: new error codeDaniel Stenberg
Doing curl_multi_add_handle() on an easy handle that is already added to a multi handle now returns this error code. It previously returned CURLM_BAD_EASY_HANDLE for this condition.
2013-07-18CURLOPT_XFERINFOFUNCTION: introducing a new progress callbackDaniel Stenberg
CURLOPT_XFERINFOFUNCTION is now the preferred progress callback function and CURLOPT_PROGRESSFUNCTION is considered deprecated. This new callback uses pure 'curl_off_t' arguments to pass on full resolution sizes. It otherwise retains the same characteristics: the same call rate, the same meanings for the arguments and the return code is used the same way. The progressfunc.c example is updated to show how to use the new callback for newer libcurls while supporting the older one if built with an older libcurl or even built with a newer libcurl while running with an older.
2013-04-27Corrected version numbers after bumpSteve Holme
2013-04-27DOCS: Updated following the addition of CURLOPT_SASL_IRSteve Holme
Documented the the option in curl_easy_setopt() and added it to symbols-in-versions.
2013-03-13Multiple pipelines and limiting the number of connections.Linus Nielsen Feltzing
Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-03-12curl_global_init: accept the CURL_GLOBAL_ACK_EINTR flagZdenek Pavlas
The flag can be used in pycurl-based applications where using the multi interface would not be acceptable because of the performance lost caused by implementing the select() loop in python. Bug: http://curl.haxx.se/bug/view.cgi?id=1168 Downstream Bug: https://bugzilla.redhat.com/919127
2012-09-01symbols-in-versions: new CURL_WAIT_* symbolsDaniel Stenberg
2012-08-16curl_easy_setopt: documented CURLSOCKTYPE_ACCEPT for SOCKOPTFUNCTIONDaniel Stenberg
2012-08-08docs: mention CURLSSH_AUTH_AGENTArmel Asselin
2012-04-05CURLOPT_POSTREDIR: also allow 303 to do POST on the redirected URLAndrei Cipu
As it turns out, some people do want that after all.
2012-02-25libcurl docs: version correctionsDaniel Stenberg
Correct some inconsistencies in which version some things were added. Bug: http://curl.haxx.se/bug/view.cgi?id=3494091 Reported by: "curlybugs"
2012-02-21CURLOPT_MAIL_AUTH: added in 7.25.0Daniel Stenberg
Brought in commit 0cf0ab6f300
2012-02-13s/7.24.1/7.25.0Daniel Stenberg
We will go straight to 7.25.0 due to the new additions
2012-02-09CURLOPT_SSL_OPTIONS: addedDaniel Stenberg
Allow an appliction to set libcurl specific SSL options. The first and only options supported right now is CURLSSLOPT_ALLOW_BEAST. It will make libcurl to disable any work-arounds the underlying SSL library may have to address a known security flaw in the SSL3 and TLS1.0 protocol versions. This is a reaction to us unconditionally removing that behavior after this security advisory: http://curl.haxx.se/docs/adv_20120124B.html ... it did however cause a lot of programs to fail because of old servers not liking this work-around. Now programs can opt to decrease the security in order to interoperate with old servers better.
2012-02-09add library support for tuning TCP_KEEPALIVEDave Reisner
This adds three new options to control the behavior of TCP keepalives: - CURLOPT_TCP_KEEPALIVE: enable/disable probes - CURLOPT_TCP_KEEPIDLE: idle time before sending first probe - CURLOPT_TCP_KEEPINTVL: delay between successive probes While not all operating systems support the TCP_KEEPIDLE and TCP_KEEPINTVL knobs, the library will still allow these options to be set by clients, silently ignoring the values.
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-11-18SFTP: support '*' prefix for quote operationsJonas Schnelli
prefixing a command with '*' means it is allowed to fail without aborting the chain actions
2011-10-03share: don't use SSL unless enabledDaniel Stenberg
Don't even declare the struct members for disabled features Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface when trying to set a sharing option that has been disabled (or not enabled) in the library.
2011-09-26remove short-lived CURL_WRITEFUNC_OUT_OF_MEMORYYang Tse
2011-09-25allow write callbacks to indicate OOM to libcurlYang Tse
Allow (*curl_write_callback) write callbacks to return CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions inside the callback itself.