aboutsummaryrefslogtreecommitdiff
path: root/docs/libcurl/symbols-in-versions
AgeCommit message (Collapse)Author
2014-02-13transfer: make Expect: 100-continue timeout configurable.Tiit Pikma
Replaced the #define CURL_TIMEOUT_EXPECT_100 in transfer.c with the CURLOPT_EXPECT_100_TIMEOUT_MS option to make the timeout configurable.
2014-02-10NPN/ALPN: allow disabling via command lineFabian Frank
when using --http2 one can now selectively disable NPN or ALPN with --no-alpn and --no-npn. for now honored with NSS only. TODO: honor this option with GnuTLS and OpenSSL
2013-12-14login options: remove the ;[options] support from CURLOPT_USERPWDDaniel Stenberg
To avoid the regression when users pass in passwords containing semi- colons, we now drop the ability to set the login options with the same options. Support for login options in CURLOPT_USERPWD was added in 7.31.0. Test case 83 was modified to verify that colons and semi-colons can be used as part of the password when using -u (CURLOPT_USERPWD). Bug: http://curl.haxx.se/bug/view.cgi?id=1311 Reported-by: Petr Bahula Assisted-by: Steve Holme Signed-off-by: Daniel Stenberg <daniel@haxx.se>
2013-11-22symbols-in-versions: Added missing CURLSSLBACKEND_* symbolsSteve Holme
2013-11-22symbols-in-versions: Fixed missing CURLINFO_TLS_SESSIONSteve Holme
2013-11-12curl_easy_setopt: Added the ability to set the login options separatelySteve Holme
Rather than set the authentication options as part of the login details specified in the URL, or via the older CURLOPT_USERPWD option, added a new libcurl option to allow the login options to be set separately.
2013-10-16SSL: Corrected version number for new symbols from commit ad34a2d5c87c7fSteve Holme
2013-10-15SSL: protocol version can be specified more preciselyGergely Nagy
CURL_SSLVERSION_TLSv1_0, CURL_SSLVERSION_TLSv1_1, CURL_SSLVERSION_TLSv1_2 enum values are added to force exact TLS version (CURL_SSLVERSION_TLSv1 means TLS 1.x). axTLS: axTLS only supports TLS 1.0 and 1.1 but it cannot be set that only one of these should be used, so we don't allow the new enum values. darwinssl: Added support for the new enum values. SChannel: Added support for the new enum values. CyaSSL: Added support for the new enum values. Bug: The original CURL_SSLVERSION_TLSv1 value enables only TLS 1.0 (it did the same before this commit), because CyaSSL cannot be configured to use TLS 1.0-1.2. GSKit: GSKit doesn't seem to support TLS 1.1 and TLS 1.2, so we do not allow those values. Bugfix: There was a typo that caused wrong SSL versions to be passed to GSKit. NSS: TLS minor version cannot be set, so we don't allow the new enum values. QsoSSL: TLS minor version cannot be set, so we don't allow the new enum values. OpenSSL: Added support for the new enum values. Bugfix: The original CURL_SSLVERSION_TLSv1 value enabled only TLS 1.0, now it enables 1.0-1.2. Command-line tool: Added command line options for the new values.
2013-09-12libcurl: New options to bind DNS to local interfaces or IP addressesKim Vandry
2013-09-05symbols: added HTTP2 symbols and sorted listDaniel Stenberg
CURL_HTTP_VERSION_2_0 and CURL_VERSION_HTTP2 are new
2013-08-28symbols-in-versions: add CURLOPT_XOAUTH2_BEARERDaniel Stenberg
2013-08-20CURLM_ADDED_ALREADY: new error codeDaniel Stenberg
Doing curl_multi_add_handle() on an easy handle that is already added to a multi handle now returns this error code. It previously returned CURLM_BAD_EASY_HANDLE for this condition.
2013-07-18CURLOPT_XFERINFOFUNCTION: introducing a new progress callbackDaniel Stenberg
CURLOPT_XFERINFOFUNCTION is now the preferred progress callback function and CURLOPT_PROGRESSFUNCTION is considered deprecated. This new callback uses pure 'curl_off_t' arguments to pass on full resolution sizes. It otherwise retains the same characteristics: the same call rate, the same meanings for the arguments and the return code is used the same way. The progressfunc.c example is updated to show how to use the new callback for newer libcurls while supporting the older one if built with an older libcurl or even built with a newer libcurl while running with an older.
2013-04-27Corrected version numbers after bumpSteve Holme
2013-04-27DOCS: Updated following the addition of CURLOPT_SASL_IRSteve Holme
Documented the the option in curl_easy_setopt() and added it to symbols-in-versions.
2013-03-13Multiple pipelines and limiting the number of connections.Linus Nielsen Feltzing
Introducing a number of options to the multi interface that allows for multiple pipelines to the same host, in order to optimize the balance between the penalty for opening new connections and the potential pipelining latency. Two new options for limiting the number of connections: CURLMOPT_MAX_HOST_CONNECTIONS - Limits the number of running connections to the same host. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished, so we can reuse the connection. CURLMOPT_MAX_TOTAL_CONNECTIONS - Limits the number of connections in total. When adding a handle that exceeds this limit, that handle will be put in a pending state until another handle is finished. The free connection will then be reused, if possible, or closed if the pending handle can't reuse it. Several new options for pipelining: CURLMOPT_MAX_PIPELINE_LENGTH - Limits the pipeling length. If a pipeline is "full" when a connection is to be reused, a new connection will be opened if the CURLMOPT_MAX_xxx_CONNECTIONS limits allow it. If not, the handle will be put in a pending state until a connection is ready (either free or a pipe got shorter). CURLMOPT_CONTENT_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a transfer with a content length that is larger than this. CURLMOPT_CHUNK_LENGTH_PENALTY_SIZE - A pipelined connection will not be reused if it is currently processing a chunk larger than this. CURLMOPT_PIPELINING_SITE_BL - A blacklist of hosts that don't allow pipelining. CURLMOPT_PIPELINING_SERVER_BL - A blacklist of server types that don't allow pipelining. See the curl_multi_setopt() man page for details.
2013-03-12curl_global_init: accept the CURL_GLOBAL_ACK_EINTR flagZdenek Pavlas
The flag can be used in pycurl-based applications where using the multi interface would not be acceptable because of the performance lost caused by implementing the select() loop in python. Bug: http://curl.haxx.se/bug/view.cgi?id=1168 Downstream Bug: https://bugzilla.redhat.com/919127
2012-09-01symbols-in-versions: new CURL_WAIT_* symbolsDaniel Stenberg
2012-08-16curl_easy_setopt: documented CURLSOCKTYPE_ACCEPT for SOCKOPTFUNCTIONDaniel Stenberg
2012-08-08docs: mention CURLSSH_AUTH_AGENTArmel Asselin
2012-04-05CURLOPT_POSTREDIR: also allow 303 to do POST on the redirected URLAndrei Cipu
As it turns out, some people do want that after all.
2012-02-25libcurl docs: version correctionsDaniel Stenberg
Correct some inconsistencies in which version some things were added. Bug: http://curl.haxx.se/bug/view.cgi?id=3494091 Reported by: "curlybugs"
2012-02-21CURLOPT_MAIL_AUTH: added in 7.25.0Daniel Stenberg
Brought in commit 0cf0ab6f300
2012-02-13s/7.24.1/7.25.0Daniel Stenberg
We will go straight to 7.25.0 due to the new additions
2012-02-09CURLOPT_SSL_OPTIONS: addedDaniel Stenberg
Allow an appliction to set libcurl specific SSL options. The first and only options supported right now is CURLSSLOPT_ALLOW_BEAST. It will make libcurl to disable any work-arounds the underlying SSL library may have to address a known security flaw in the SSL3 and TLS1.0 protocol versions. This is a reaction to us unconditionally removing that behavior after this security advisory: http://curl.haxx.se/docs/adv_20120124B.html ... it did however cause a lot of programs to fail because of old servers not liking this work-around. Now programs can opt to decrease the security in order to interoperate with old servers better.
2012-02-09add library support for tuning TCP_KEEPALIVEDave Reisner
This adds three new options to control the behavior of TCP keepalives: - CURLOPT_TCP_KEEPALIVE: enable/disable probes - CURLOPT_TCP_KEEPIDLE: idle time before sending first probe - CURLOPT_TCP_KEEPINTVL: delay between successive probes While not all operating systems support the TCP_KEEPIDLE and TCP_KEEPINTVL knobs, the library will still allow these options to be set by clients, silently ignoring the values.
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-11-18SFTP: support '*' prefix for quote operationsJonas Schnelli
prefixing a command with '*' means it is allowed to fail without aborting the chain actions
2011-10-03share: don't use SSL unless enabledDaniel Stenberg
Don't even declare the struct members for disabled features Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface when trying to set a sharing option that has been disabled (or not enabled) in the library.
2011-09-26remove short-lived CURL_WRITEFUNC_OUT_OF_MEMORYYang Tse
2011-09-25allow write callbacks to indicate OOM to libcurlYang Tse
Allow (*curl_write_callback) write callbacks to return CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions inside the callback itself.
2011-08-26NTLM single-sign on adjustments (X)Yang Tse
Functions renamed: Curl_output_ntlm_sso -> Curl_output_ntlm_wb sso_ntlm_close -> wb_ntlm_close sso_ntlm_response -> wb_ntlm_response sso_ntlm_initiate -> wb_ntlm_initiate Preprocessor symbols renamed: CURLAUTH_NTLM_SSO -> CURLAUTH_NTLM_WB CURL_VERSION_NTLM_SSO -> CURL_VERSION_NTLM_WB
2011-08-08s/7.21.8/7.22.0Daniel Stenberg
2011-08-03curl_gssapi: refine the handling of CURLOPT_GSSAPI_DELEGATIONKamil Dudka
Suggested by Richard Silverman.
2011-07-19symbols-in-versions: add NTLM_SSO symbolsDaniel Stenberg
2011-05-18symbols-in-versions: add CLOSESOCKET*Daniel Stenberg
2011-04-18transfer-encoding: added new option and cmdlineDaniel Stenberg
Added CURLOPT_TRANSFER_ENCODING as the option to set to request Transfer Encoding in HTTP requests (if built zlib enabled). I also renamed CURLOPT_ENCODING to CURLOPT_ACCEPT_ENCODING (while keeping the old name around) to reduce the confusion when we have to encoding options for HTTP. --tr-encoding is now the new command line option for curl to request this, and thus I updated the test cases accordingly.
2011-04-05return code cleanup: build, init and run-time errorsDaniel Stenberg
Stop the abuse of CURLE_FAILED_INIT as return code for things not being init related by introducing two new return codes: CURLE_NOT_BUILT_IN and CURLE_UNKNOWN_OPTION CURLE_NOT_BUILT_IN replaces return code 4 that has been obsoleted for several years. It is used for returning error when something is attempted to be used but the feature/option was not enabled or explictitly disabled at build-time. Getting this error mostly means that libcurl needs to be rebuilt. CURLE_FAILED_INIT is now saved and used strictly for init failures. Getting this problem means something went seriously wrong, like a resource shortage or similar. CURLE_UNKNOWN_OPTION is the option formerly known as CURLE_UNKNOWN_TELNET_OPTION (and the old name is still present, separately defined to be removed in a very distant future). This error code is meant to be used to return when an option is given to libcurl that isn't known. This problem would mostly indicate a problem in the program that uses libcurl.
2011-03-24symbols-in-versions: make test 1119 happyDaniel Stenberg
2011-03-20symbols-in-versions: many correctionsDaniel Stenberg
Scanned with a tool that checked for mistakes and this is the subsequent cleanup.
2011-03-17symbols-in-versions: remove duplicatesDaniel Stenberg
2011-03-17symbols-in-versions: 2 correctionsDaniel Stenberg
CURLE_CHUNK_FAILED and CURLE_FTP_BAD_FILE_LIST were introduced in 7.21.0, not 7.20.1
2011-02-17symbols-in-versions: sortedDaniel Stenberg
I forgot to sort it when I added the CURL_SOCKOPT_* symbols
2011-02-17SOCKOPTFUNCTION: documented new return codesDaniel Stenberg
2011-02-09CURLE_TLSAUTH_FAILED: removedQuinn Slack
On second thought, I think CURLE_TLSAUTH_FAILED should be eliminated. It was only being raised when an internal error occurred while allocating or setting the GnuTLS SRP client credentials struct. For TLS authentication failures, the general CURLE_SSL_CONNECT_ERROR seems appropriate; its error string already includes "passwords" as a possible cause. Having a separate TLS auth error code might also cause people to think that a TLS auth failure means the wrong username or password was entered, when it could also be a sign of a man-in-the-middle attack.
2011-01-19symbols-in-versions: add the new TLSAUTH-SRP symbolsDaniel Stenberg
2010-12-09symbols-in-versions: CURLOPT_KEYPASSWD fixedDaniel Stenberg
It was added in 7.17.0 and is not deprecated
2010-11-11HTTP Auth: Add CURLAUTH_ONLYDaniel Stenberg
This is a meta symbol. OR this value together with a single specific auth value to force libcurl to probe for un-restricted auth and if not, only that single auth algorithm is acceptable. For example you can use CURLAUTH_DIGEST|CURLAUTH_ONLY to make libcurl first probe for what method to use, but yet only consider Digest to be acceptable. Using _only_ CURLAUTH_DIGEST without the CURLAUTH_ONLY field, will make libcurl explicitly use Digest right away and not do any probing.
2010-11-09symbols-in-version: add CURL_SOCKET_BADDaniel Stenberg
I also documented the filtering logic in the symbol-scan.pl function to clarify why not all CURL_* symbols are included.
2010-11-08CURLOPT_RESOLVE: documentedDaniel Stenberg
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-05 16:43:17 +0000