aboutsummaryrefslogtreecommitdiff
path: root/docs/libcurl/symbols-in-versions
AgeCommit message (Collapse)Author
2016-09-07errors: new alias CURLE_WEIRD_SERVER_REPLY (8)Jay Satiro
Since we're using CURLE_FTP_WEIRD_SERVER_REPLY in imap, pop3 and smtp as more of a generic "failed to parse" introduce an alias without FTP in the name. Closes https://github.com/curl/curl/pull/975
2016-08-09symbols-in-versions: add CURL_STRICTERDaniel Stenberg
Added in 5fce88aa8c12564
2016-05-30http: add CURLINFO_HTTP_VERSION and %{http_version}Frank Gevaerts
Adds access to the effectively used http version to both libcurl and curl. Closes #799
2016-04-25symbols-in-versions: added new CURLSSLBACKEND_ symbolsDaniel Stenberg
2016-04-18url: add CURLOPT_TCP_FASTOPEN optionAlessandro Ghedini
2016-04-17news: CURLOPT_CONNECT_TO and --connect-toMichael Kaufmann
Makes curl connect to the given host+port instead of the host+port found in the URL.
2016-04-11http2: Add handling stream level errorTatsuhiro Tsujikawa
Previously, when a stream was closed with other than NGHTTP2_NO_ERROR by RST_STREAM, underlying TCP connection was dropped. This is undesirable since there may be other streams multiplexed and they are very much fine. This change introduce new error code CURLE_HTTP2_STREAM, which indicates stream error that only affects the relevant stream, and connection should be kept open. The existing CURLE_HTTP2 means connection error in general. Ref: https://github.com/curl/curl/issues/659 Ref: https://github.com/curl/curl/pull/663
2016-04-09CURLOPT_SOCKS5_GSSAPI_SERVICE: Merged with CURLOPT_PROXY_SERVICE_NAMESteve Holme
As these two options provide identical functionality, the former for SOCK5 proxies and the latter for HTTP proxies, merged the two options together. As such CURLOPT_SOCKS5_GSSAPI_SERVICE is marked as deprecated as of 7.49.0.
2016-04-02test1119: Fixed missing CURL_DID_MEMORY_FUNC_TYPEDEFS symbolSteve Holme
2016-03-31http2: support "prior knowledge", no upgrade from HTTP/1.1Diego Bes
Supports HTTP/2 over clear TCP - Optimize switching to HTTP/2 by removing calls to init and setup before switching. Switching will eventually call setup and setup calls init. - Supports new version to “force” the use of HTTP/2 over clean TCP - Add common line parameter “--http2-prior-knowledge” to the Curl command line tool.
2016-02-23getinfo: CURLINFO_TLS_SSL_PTR supersedes CURLINFO_TLS_SESSIONJay Satiro
The two options are almost the same, except in the case of OpenSSL: CURLINFO_TLS_SESSION OpenSSL session internals is SSL_CTX *. CURLINFO_TLS_SSL_PTR OpenSSL session internals is SSL *. For backwards compatibility we couldn't modify CURLINFO_TLS_SESSION to return an SSL pointer for OpenSSL. Also, add support for the 'internals' member to point to SSL object for the other backends axTLS, PolarSSL, Secure Channel, Secure Transport and wolfSSL. Bug: https://github.com/curl/curl/issues/234 Reported-by: dkjjr89@users.noreply.github.com Bug: https://curl.haxx.se/mail/lib-2015-09/0127.html Reported-by: Michael König
2016-02-23TFTP: add option to suppress TFTP option requests (Part 1)Michael Koenig
Some TFTP server implementations ignore the "TFTP Option extension" (RFC 1782-1784, 2347-2349), or implement it in a flawed way, causing problems with libcurl. Another switch for curl_easy_setopt "CURLOPT_TFTP_NO_OPTIONS" is introduced which prevents libcurl from sending TFTP option requests to a server, avoiding many problems caused by faulty implementations. Bug: https://github.com/curl/curl/issues/481
2015-12-13http: add libcurl option to allow HTTP/2 for HTTPS onlyDaniel Stenberg
... and stick to 1.1 for HTTP. This is in line with what browsers do and should have very little risk.
2015-12-07version: Add flag CURL_VERSION_PSL for libpslGisle Vanem
2015-11-13symbols-in-versions: Added new CURLOPTTYPE_STRINGPOINT aliasSteve Holme
...following commit aba281e762 to fix test 1119.
2015-11-02symbols-in-version: add all CURL_HTTPPOST_* symbolsDaniel Stenberg
2015-11-02formadd: support >2GB files on windowsDaniel Stenberg
Closes #425
2015-10-23http2: s/priority/weightDaniel Stenberg
2015-10-20vtls: added support for mbedTLSJonas Minnberg
closes #496
2015-08-24getinfo: added CURLINFO_ACTIVESOCKETRazvan Cojocaru
This patch addresses known bug #76, where on 64-bit Windows SOCKET is 64 bits wide, but long is only 32, making CURLINFO_LASTSOCKET unreliable. Signed-off-by: Razvan Cojocaru <rcojocaru@bitdefender.com>
2015-08-22CURLOPT_DEFAULT_PROTOCOL: addedNathaniel Waisbrot
- Add new option CURLOPT_DEFAULT_PROTOCOL to allow specifying a default protocol for schemeless URLs. - Add new tool option --proto-default to expose CURLOPT_DEFAULT_PROTOCOL. In the case of schemeless URLs libcurl will behave in this way: When the option is used libcurl will use the supplied default. When the option is not used, libcurl will follow its usual plan of guessing from the hostname and falling back to 'http'.
2015-07-18symbols-in-versions: Add new CURLSSLOPT_NO_REVOKE symbolJay Satiro
2015-06-30symbols-in-versions: Add new http2 push symbolsJay Satiro
Prior to this change test 1119 failed due to the missing symbols.
2015-06-05curl.h: add CURL_HTTP_VERSION_2Daniel Stenberg
The protocol is named "HTTP/2" after all. It is an alias for the existing CURL_HTTP_VERSION_2_0 enum.
2015-05-18symbols-in-versions: add CURLOPT_PIPEWAITDaniel Stenberg
2015-05-18http2: separate multiplex/pipelining + cleanup memory leaksDaniel Stenberg
2015-04-28Negotiate: custom service names for SPNEGO.Linus Nielsen
* Add new options, CURLOPT_PROXY_SERVICE_NAME and CURLOPT_SERVICE_NAME. * Add new curl options, --proxy-service-name and --service-name.
2015-03-24symbols-in-versions: added CURLOPT_PATH_AS_ISDan Fandrich
2015-03-20url: add CURLOPT_SSL_FALSESTART optionAlessandro Ghedini
This option can be used to enable/disable TLS False Start defined in the RFC draft-bmoeller-tls-falsestart.
2015-01-16url: add CURLOPT_SSL_VERIFYSTATUS optionAlessandro Ghedini
This option can be used to enable/disable certificate status verification using the "Certificate Status Request" TLS extension defined in RFC6066 section 8. This also adds the CURLE_SSL_INVALIDCERTSTATUS error, to be used when the certificate status verification fails, and the Curl_ssl_cert_status_request() function, used to check whether the SSL backend supports the status_request extension.
2014-12-04libcurl: add UNIX domain sockets supportPeter Wu
The ability to do HTTP requests over a UNIX domain socket has been requested before, in Apr 2008 [0][1] and Sep 2010 [2]. While a discussion happened, no patch seems to get through. I decided to give it a go since I need to test a nginx HTTP server which listens on a UNIX domain socket. One patch [3] seems to make it possible to use the CURLOPT_OPENSOCKETFUNCTION function to gain a UNIX domain socket. Another person wrote a Go program which can do HTTP over a UNIX socket for Docker[4] which uses a special URL scheme (though the name contains cURL, it has no relation to the cURL library). This patch considers support for UNIX domain sockets at the same level as HTTP proxies / IPv6, it acts as an intermediate socket provider and not as a separate protocol. Since this feature affects network operations, a new feature flag was added ("unix-sockets") with a corresponding CURL_VERSION_UNIX_SOCKETS macro. A new CURLOPT_UNIX_SOCKET_PATH option is added and documented. This option enables UNIX domain sockets support for all requests on the handle (replacing IP sockets and skipping proxies). A new configure option (--enable-unix-sockets) and CMake option (ENABLE_UNIX_SOCKETS) can disable this optional feature. Note that I deliberately did not mark this feature as advanced, this is a feature/component that should easily be available. [0]: http://curl.haxx.se/mail/lib-2008-04/0279.html [1]: http://daniel.haxx.se/blog/2008/04/14/http-over-unix-domain-sockets/ [2]: http://sourceforge.net/p/curl/feature-requests/53/ [3]: http://curl.haxx.se/mail/lib-2008-04/0361.html [4]: https://github.com/Soulou/curl-unix-socket Signed-off-by: Peter Wu <peter@lekensteyn.nl>
2014-11-29smb: Added SMB protocol and port definitionsBill Nagel
Added the necessary protocol and port definitions in order to support SMB/CIFS.
2014-11-07version info: Added Kerberos V5 to the supported featuresSteve Holme
2014-11-02CURL_VERSION_KERBEROS4: Mark as deprecatedSteve Holme
Support for Kerberos V4 was removed in v7.33.0.
2014-10-13vtls: remove QsoSSLPatrick Monnerat
2014-10-07SSL: implement public key pinningmoparisthebest
Option --pinnedpubkey takes a path to a public key in DER format and only connect if it matches (currently only implemented with OpenSSL). Provides CURLOPT_PINNEDPUBLICKEY for curl_easy_setopt(). Extract a public RSA key from a website like so: openssl s_client -connect google.com:443 2>&1 < /dev/null | \ sed -n '/-----BEGIN/,/-----END/p' | openssl x509 -noout -pubkey \ | openssl rsa -pubin -outform DER > google.com.der
2014-08-09docs: Update SPNEGO and GSS-API related doc sectionsMichael Osipov
Reflect recent changes in SPNEGO and GSS-API code in the docs. Update them with appropriate namings and remove visible spots for GSS-Negotiate.
2014-07-31ssl: generalize how the ssl backend identifier is setDaniel Stenberg
Each backend now defines CURL_SSL_BACKEND accordingly. Added the *AXTLS one which was missing previously.
2014-07-24symbols: CURL_VERSION_GSSNEGOTIATE is deprecatedDaniel Stenberg
2014-07-23http2: more and better error checkingDaniel Stenberg
1 - fixes the warnings when built without http2 support 2 - adds CURLE_HTTP2, a new error code for errors detected by nghttp2 basically when they are about http2 specific things.
2014-07-23symbols-in-versions: new SPNEGO/GSS-API symbols in 7.38.0Daniel Stenberg
2014-04-04docs: this is for 7.37.0Daniel Stenberg
And clarify for curl that --proxy-header now must be used for headers that are meant for a proxy, and they will not be included if the request is not for a proxy.
2014-04-04symbols-in-versions: Added CURLHEADER_*Daniel Stenberg
... and sorted the list
2014-04-04CURLOPT_HEADEROPT: addedDaniel Stenberg
Modified the logic so that CURLOPT_HEADEROPT now controls if PROXYHEADER is actually used or not.
2014-04-04CURLOPT_PROXYHEADER: set headers for proxy-onlyDaniel Stenberg
Includes docs and new test cases: 1525, 1526 and 1527 Co-written-by: Vijay Panghal
2014-02-13transfer: make Expect: 100-continue timeout configurable.Tiit Pikma
Replaced the #define CURL_TIMEOUT_EXPECT_100 in transfer.c with the CURLOPT_EXPECT_100_TIMEOUT_MS option to make the timeout configurable.
2014-02-10NPN/ALPN: allow disabling via command lineFabian Frank
when using --http2 one can now selectively disable NPN or ALPN with --no-alpn and --no-npn. for now honored with NSS only. TODO: honor this option with GnuTLS and OpenSSL
2013-12-14login options: remove the ;[options] support from CURLOPT_USERPWDDaniel Stenberg
To avoid the regression when users pass in passwords containing semi- colons, we now drop the ability to set the login options with the same options. Support for login options in CURLOPT_USERPWD was added in 7.31.0. Test case 83 was modified to verify that colons and semi-colons can be used as part of the password when using -u (CURLOPT_USERPWD). Bug: http://curl.haxx.se/bug/view.cgi?id=1311 Reported-by: Petr Bahula Assisted-by: Steve Holme Signed-off-by: Daniel Stenberg <daniel@haxx.se>
2013-11-22symbols-in-versions: Added missing CURLSSLBACKEND_* symbolsSteve Holme
2013-11-22symbols-in-versions: Fixed missing CURLINFO_TLS_SESSIONSteve Holme