aboutsummaryrefslogtreecommitdiff
path: root/docs/libcurl
AgeCommit message (Collapse)Author
2012-03-31DOCS: Added information regarding POP3 commands to CURLOPT_CUSTOMREQUESTSteve Holme
2012-03-10CURLSSH_OPT_AUTH: documented it has no effectArmel Asselin
2012-02-25libcurl docs: version correctionsDaniel Stenberg
Correct some inconsistencies in which version some things were added. Bug: http://curl.haxx.se/bug/view.cgi?id=3494091 Reported by: "curlybugs"
2012-02-23SMTP: Added support for returning SMTP response codesSteve Holme
Set the conn->data->info.httpcode variable in smtp_statemach_act() to allow Curl_getinfo() to return the SMTP response code via the CURLINFO_RESPONSE_CODE action.
2012-02-21CURLOPT_MAIL_AUTH: added in 7.25.0Daniel Stenberg
Brought in commit 0cf0ab6f300
2012-02-17CURLE_FTP_PRET_FAILED: listed twiceDaniel Stenberg
Make sure it is mentioned once and with the correct description
2012-02-16docs: mention that NTLM works with NSS, tooKamil Dudka
2012-02-15DOCS: Added information for CURLOPT_MAIL_AUTH.Steve Holme
Added information relating to the new CURLOPT_MAIL_AUTH parameter and reworked CURLOPT_MAIL_FROM and CURLOPT_MAIL_RCPT to be a clearer. Fixed inconsistencies of "vocalisation of the abbreviation" versus "vocalisation of the first word" for all abbreviations. Corrected a typo in CURLOPT_NOPROXY.
2012-02-13s/7.24.1/7.25.0Daniel Stenberg
We will go straight to 7.25.0 due to the new additions
2012-02-09CURLOPT_SSL_OPTIONS: addedDaniel Stenberg
Allow an appliction to set libcurl specific SSL options. The first and only options supported right now is CURLSSLOPT_ALLOW_BEAST. It will make libcurl to disable any work-arounds the underlying SSL library may have to address a known security flaw in the SSL3 and TLS1.0 protocol versions. This is a reaction to us unconditionally removing that behavior after this security advisory: http://curl.haxx.se/docs/adv_20120124B.html ... it did however cause a lot of programs to fail because of old servers not liking this work-around. Now programs can opt to decrease the security in order to interoperate with old servers better.
2012-02-09add library support for tuning TCP_KEEPALIVEDave Reisner
This adds three new options to control the behavior of TCP keepalives: - CURLOPT_TCP_KEEPALIVE: enable/disable probes - CURLOPT_TCP_KEEPIDLE: idle time before sending first probe - CURLOPT_TCP_KEEPINTVL: delay between successive probes While not all operating systems support the TCP_KEEPIDLE and TCP_KEEPINTVL knobs, the library will still allow these options to be set by clients, silently ignoring the values.
2012-01-24curl_easy_setopt.3: Fixed SEEKDATA & CLOSESOCKETDATA descriptionsDan Fandrich
2012-01-22CURLOPT_ACCEPTTIMEOUT_MS: spellfixDaniel Stenberg
2012-01-03curl_easy_setopt: refer to the most recent URI RFCDaniel Stenberg
2012-01-02curl_easy_strerror.3: minor synopsis edit of the lookDaniel Stenberg
2011-12-20libcurl docs: add the new FTP accept option + errorsDaniel Stenberg
2011-12-20libcurl-tutorial.3: curl doesn't sent pragma no-cacheDaniel Stenberg
It did a long time ago
2011-12-20libcurl-multi.3: active FTP is no longer blocking!Daniel Stenberg
2011-12-20FTP: perform active connections non-blockingGokhan Sengun
1- Two new error codes are introduced. CURLE_FTP_ACCEPT_FAILED to be set whenever ACCEPTing fails because of FTP server connected. CURLE_FTP_ACCEPT_TIMEOUT to be set whenever ACCEPTing timeouts. Neither of these errors are considered fatal and control connection remains OK because it could just be a firewall blocking server to connect to the client. 2- One new setopt option was introduced. CURLOPT_ACCEPTTIMEOUT_MS It sets the maximum amount of time FTP client is going to wait for a server to connect. Internal default accept timeout is 60 seconds.
2011-12-20libcurl.m4: Fix quoting arguments of AC_LANG_PROGRAMBernhard Reutner-Fischer
Parameters were underquoted, resulting in warning: AC_LANG_CONFTEST: no AC_LANG_SOURCE call detected in body Signed-off-by: Bernhard Reutner-Fischer <rep.dot.nop@gmail.com>
2011-12-20tutorial: remove CURLM_CALL_MULTI_PERFORM add sharingDaniel Stenberg
The CURLM_CALL_MULTI_PERFORM reference is an old leftover I had to remove. I also added some blurb to the previously blank "sharing" section.
2011-12-19DOCS: Added SMTP information to CURLOPT_INFILESIZESteve Holme
2011-12-15docs: fix typo in curl_easy_setopt manpageAlessandro Ghedini
2011-12-12CURLOPT_INTERFACE: avoid resolving interfaces namesJason Glasgow
Do not try to resolve interfaces names via DNS by recognizing interface names in a few ways. If the interface option argument has a prefix of "if!" then treat the argument as only an interface. Similarly, if the interface argument is the name of an interface (even if it does not have an IP address assigned), treat it as an interface name. Finally, if the interface argument is prefixed by "host!" treat it as a hostname that must be resolved by /etc/hosts or DNS. These changes allow a client using the multi interfaces to avoid blocking on name resolution if the interface loses its IP address or disappears.
2011-12-05CURLOPT_CONNECTTIMEOUT: default is 300 secondsDaniel Stenberg
If the option is set to 0, the default timeout will be used - which in modern libcurl versions equals 300 seconds (== 5 minutes). Bug: http://curl.haxx.se/mail/lib-2011-12/0051.html Reported by: Vladimir Grishchenko
2011-12-05FTP: call opensocket callback properlyDaniel Stenberg
When the new socket is created for an active connection, it is now done using the open socket callback. Test case 596 was modified to run fine, although it hides the fact that the close callback is still called too many times, as it also gets called for closing sockets that were created with accept().
2011-11-24symbols.pl: provide LIBCURL_HAS macro for appsDaniel Stenberg
Experience has shown that the symbols-in-versions file is very useful to applications that want to build with a wide range of libcurl versions. It is however easy to get it wrong and the source gets a bit messy with all the fixed numerical comparisions. The point of this script is to provide an easy-to-use macro for libcurl- using applications to do preprocessor checks for specific libcurl defines, and yet make the code clearly show what the macro is used for.
2011-11-18CURLOPT_QUOTE: SFTP supports the '*'-prefix nowDaniel Stenberg
2011-11-18SFTP: support '*' prefix for quote operationsJonas Schnelli
prefixing a command with '*' means it is allowed to fail without aborting the chain actions
2011-11-17CURLOPT_DNS_SERVERS: set name servers if possibleJason Glasgow
2011-10-27libcurl-multi.3: update the list of areas still blockingDaniel Stenberg
2011-10-24curl_easy_setopt.3: headers can be CURL_MAX_HTTP_HEADER bytesDaniel Stenberg
Mention this maximum header size for the header callback cases
2011-10-24curl_easy_setopt.3: fix typoDaniel Stenberg
shoot, Dan Fandrich already had this pointed out...
2011-10-24curl_easy_setopt: Added pop3 to CURLOPT_URL.Steve Holme
Added pop3 username and password example as well as an explanation of how path part of the URL is used under pop3. Additionally have corrected a couple of typos.
2011-10-20CURLM_CALL_MULTI_PERFORM: remove mentionDaniel Stenberg
This return code has not been used since 7.20.0 so we can stop mentioning it for current libcurl.
2011-10-16curl_multi_fdset: clarify the max_fd == -1 caseDaniel Stenberg
Elaborate what max_fd == -1 means Remove the reference to CURLM_CALL_MULTI_PERFORM as modern libcurl versions don't ever return that.
2011-10-03m4: Use x in order to avoid variable 'x' set but not used ↵Dominique Leuenberger
[-Werror=unused-but-set-variable] This error could be caused by configure scripts being run with -Werror -Wall, which would lead to libcurl being detected as unusable.
2011-10-03share: don't use SSL unless enabledDaniel Stenberg
Don't even declare the struct members for disabled features Introducing the CURLSHE_NOT_BUILT_IN return code for the share interface when trying to set a sharing option that has been disabled (or not enabled) in the library.
2011-09-30tutorial: clarify the handle sharing when treadedDaniel Stenberg
Previously there was wording that made people uncertain of the exact rules. Feedback by: Julien Royer and Georg Lippitsch URL: http://curl.haxx.se/mail/lib-2011-09/0357.html
2011-09-28curl_easy_setopt: Added scp and sftp to the URL sectionDan Fandrich
2011-09-28curl_easy_setopt: A brief tidy upSteve Holme
Slight rewording of the CURLOPT_URL SMTP sub-section. Corrected the incorrect use of hyphens on the three uses of "zero-terminated" with "zero terminated" to match the rest of the document. Corrected the use of an out of place hyphen in CURLOPT_NOPROXY section.
2011-09-28SSL session sharing support addedAlejandro Alvarez
With locking, plus test, plus documentation
2011-09-28multi docs: extended the multi_socket API descriptionDaniel Stenberg
2011-09-26remove short-lived CURL_WRITEFUNC_OUT_OF_MEMORYYang Tse
2011-09-25allow write callbacks to indicate OOM to libcurlYang Tse
Allow (*curl_write_callback) write callbacks to return CURL_WRITEFUNC_OUT_OF_MEMORY to properly indicate libcurl of OOM conditions inside the callback itself.
2011-09-25curl_multi_fdset: avoid FD_SET out of boundsDaniel Stenberg
If a socket is larger than FD_SETSIZE, avoid using FD_SET() on the platforms where this is possible. Bug: http://curl.haxx.se/bug/view.cgi?id=3413274 Reported by: Tim Starling
2011-09-18CURLOPT_URL docs: no need to mention function namesDaniel Stenberg
2011-09-18CURLOPT_URL: Expanded URL descriptionSteve Holme
Expanded the section about CURLOPT_URL to include the format of the URL and detailed information and examples relating to specific protocols.
2011-09-12Document NTLM winbind options (and caveats)Dan Fandrich
2011-08-26NTLM single-sign on adjustments (X)Yang Tse
Functions renamed: Curl_output_ntlm_sso -> Curl_output_ntlm_wb sso_ntlm_close -> wb_ntlm_close sso_ntlm_response -> wb_ntlm_response sso_ntlm_initiate -> wb_ntlm_initiate Preprocessor symbols renamed: CURLAUTH_NTLM_SSO -> CURLAUTH_NTLM_WB CURL_VERSION_NTLM_SSO -> CURL_VERSION_NTLM_WB
generated by cgit v1.2.3 (git 2.25.1) at 2024-11-09 00:40:11 +0000